Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * OMAP2+ common Power & Reset Management (PRM) IP block functions
4 *
5 * Copyright (C) 2011 Texas Instruments, Inc.
6 * Tero Kristo <t-kristo@ti.com>
7 *
8 * For historical purposes, the API used to configure the PRM
9 * interrupt handler refers to it as the "PRCM interrupt." The
10 * underlying registers are located in the PRM on OMAP3/4.
11 *
12 * XXX This code should eventually be moved to a PRM driver.
13 */
14
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/init.h>
18#include <linux/io.h>
19#include <linux/irq.h>
20#include <linux/interrupt.h>
21#include <linux/slab.h>
22#include <linux/of.h>
23#include <linux/of_address.h>
24#include <linux/clk-provider.h>
25#include <linux/clk/ti.h>
26
27#include "soc.h"
28#include "prm2xxx_3xxx.h"
29#include "prm2xxx.h"
30#include "prm3xxx.h"
31#include "prm33xx.h"
32#include "prm44xx.h"
33#include "prm54xx.h"
34#include "prm7xx.h"
35#include "prcm43xx.h"
36#include "common.h"
37#include "clock.h"
38#include "cm.h"
39#include "control.h"
40
41/*
42 * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
43 * XXX this is technically not needed, since
44 * omap_prcm_register_chain_handler() could allocate this based on the
45 * actual amount of memory needed for the SoC
46 */
47#define OMAP_PRCM_MAX_NR_PENDING_REG 2
48
49/*
50 * prcm_irq_chips: an array of all of the "generic IRQ chips" in use
51 * by the PRCM interrupt handler code. There will be one 'chip' per
52 * PRM_{IRQSTATUS,IRQENABLE}_MPU register pair. (So OMAP3 will have
53 * one "chip" and OMAP4 will have two.)
54 */
55static struct irq_chip_generic **prcm_irq_chips;
56
57/*
58 * prcm_irq_setup: the PRCM IRQ parameters for the hardware the code
59 * is currently running on. Defined and passed by initialization code
60 * that calls omap_prcm_register_chain_handler().
61 */
62static struct omap_prcm_irq_setup *prcm_irq_setup;
63
64/* prm_base: base virtual address of the PRM IP block */
65struct omap_domain_base prm_base;
66
67u16 prm_features;
68
69/*
70 * prm_ll_data: function pointers to SoC-specific implementations of
71 * common PRM functions
72 */
73static struct prm_ll_data null_prm_ll_data;
74static struct prm_ll_data *prm_ll_data = &null_prm_ll_data;
75
76/* Private functions */
77
78/*
79 * Move priority events from events to priority_events array
80 */
81static void omap_prcm_events_filter_priority(unsigned long *events,
82 unsigned long *priority_events)
83{
84 int i;
85
86 for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
87 priority_events[i] =
88 events[i] & prcm_irq_setup->priority_mask[i];
89 events[i] ^= priority_events[i];
90 }
91}
92
93/*
94 * PRCM Interrupt Handler
95 *
96 * This is a common handler for the OMAP PRCM interrupts. Pending
97 * interrupts are detected by a call to prcm_pending_events and
98 * dispatched accordingly. Clearing of the wakeup events should be
99 * done by the SoC specific individual handlers.
100 */
101static void omap_prcm_irq_handler(struct irq_desc *desc)
102{
103 unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG];
104 unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
105 struct irq_chip *chip = irq_desc_get_chip(desc);
106 unsigned int virtirq;
107 int nr_irq = prcm_irq_setup->nr_regs * 32;
108
109 /*
110 * If we are suspended, mask all interrupts from PRCM level,
111 * this does not ack them, and they will be pending until we
112 * re-enable the interrupts, at which point the
113 * omap_prcm_irq_handler will be executed again. The
114 * _save_and_clear_irqen() function must ensure that the PRM
115 * write to disable all IRQs has reached the PRM before
116 * returning, or spurious PRCM interrupts may occur during
117 * suspend.
118 */
119 if (prcm_irq_setup->suspended) {
120 prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask);
121 prcm_irq_setup->suspend_save_flag = true;
122 }
123
124 /*
125 * Loop until all pending irqs are handled, since
126 * generic_handle_irq() can cause new irqs to come
127 */
128 while (!prcm_irq_setup->suspended) {
129 prcm_irq_setup->read_pending_irqs(pending);
130
131 /* No bit set, then all IRQs are handled */
132 if (find_first_bit(pending, nr_irq) >= nr_irq)
133 break;
134
135 omap_prcm_events_filter_priority(pending, priority_pending);
136
137 /*
138 * Loop on all currently pending irqs so that new irqs
139 * cannot starve previously pending irqs
140 */
141
142 /* Serve priority events first */
143 for_each_set_bit(virtirq, priority_pending, nr_irq)
144 generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
145
146 /* Serve normal events next */
147 for_each_set_bit(virtirq, pending, nr_irq)
148 generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
149 }
150 if (chip->irq_ack)
151 chip->irq_ack(&desc->irq_data);
152 if (chip->irq_eoi)
153 chip->irq_eoi(&desc->irq_data);
154 chip->irq_unmask(&desc->irq_data);
155
156 prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */
157}
158
159/* Public functions */
160
161/**
162 * omap_prcm_event_to_irq - given a PRCM event name, returns the
163 * corresponding IRQ on which the handler should be registered
164 * @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq
165 *
166 * Returns the Linux internal IRQ ID corresponding to @name upon success,
167 * or -ENOENT upon failure.
168 */
169int omap_prcm_event_to_irq(const char *name)
170{
171 int i;
172
173 if (!prcm_irq_setup || !name)
174 return -ENOENT;
175
176 for (i = 0; i < prcm_irq_setup->nr_irqs; i++)
177 if (!strcmp(prcm_irq_setup->irqs[i].name, name))
178 return prcm_irq_setup->base_irq +
179 prcm_irq_setup->irqs[i].offset;
180
181 return -ENOENT;
182}
183
184/**
185 * omap_prcm_irq_cleanup - reverses memory allocated and other steps
186 * done by omap_prcm_register_chain_handler()
187 *
188 * No return value.
189 */
190static void omap_prcm_irq_cleanup(void)
191{
192 unsigned int irq;
193 int i;
194
195 if (!prcm_irq_setup) {
196 pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n");
197 return;
198 }
199
200 if (prcm_irq_chips) {
201 for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
202 if (prcm_irq_chips[i])
203 irq_remove_generic_chip(prcm_irq_chips[i],
204 0xffffffff, 0, 0);
205 prcm_irq_chips[i] = NULL;
206 }
207 kfree(prcm_irq_chips);
208 prcm_irq_chips = NULL;
209 }
210
211 kfree(prcm_irq_setup->saved_mask);
212 prcm_irq_setup->saved_mask = NULL;
213
214 kfree(prcm_irq_setup->priority_mask);
215 prcm_irq_setup->priority_mask = NULL;
216
217 irq = prcm_irq_setup->irq;
218 irq_set_chained_handler(irq, NULL);
219
220 if (prcm_irq_setup->base_irq > 0)
221 irq_free_descs(prcm_irq_setup->base_irq,
222 prcm_irq_setup->nr_regs * 32);
223 prcm_irq_setup->base_irq = 0;
224}
225
226void omap_prcm_irq_prepare(void)
227{
228 prcm_irq_setup->suspended = true;
229}
230
231void omap_prcm_irq_complete(void)
232{
233 prcm_irq_setup->suspended = false;
234
235 /* If we have not saved the masks, do not attempt to restore */
236 if (!prcm_irq_setup->suspend_save_flag)
237 return;
238
239 prcm_irq_setup->suspend_save_flag = false;
240
241 /*
242 * Re-enable all masked PRCM irq sources, this causes the PRCM
243 * interrupt to fire immediately if the events were masked
244 * previously in the chain handler
245 */
246 prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask);
247}
248
249/**
250 * omap_prcm_register_chain_handler - initializes the prcm chained interrupt
251 * handler based on provided parameters
252 * @irq_setup: hardware data about the underlying PRM/PRCM
253 *
254 * Set up the PRCM chained interrupt handler on the PRCM IRQ. Sets up
255 * one generic IRQ chip per PRM interrupt status/enable register pair.
256 * Returns 0 upon success, -EINVAL if called twice or if invalid
257 * arguments are passed, or -ENOMEM on any other error.
258 */
259int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
260{
261 int nr_regs;
262 u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
263 int offset, i, irq;
264 struct irq_chip_generic *gc;
265 struct irq_chip_type *ct;
266
267 if (!irq_setup)
268 return -EINVAL;
269
270 nr_regs = irq_setup->nr_regs;
271
272 if (prcm_irq_setup) {
273 pr_err("PRCM: already initialized; won't reinitialize\n");
274 return -EINVAL;
275 }
276
277 if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) {
278 pr_err("PRCM: nr_regs too large\n");
279 return -EINVAL;
280 }
281
282 prcm_irq_setup = irq_setup;
283
284 prcm_irq_chips = kcalloc(nr_regs, sizeof(void *), GFP_KERNEL);
285 prcm_irq_setup->saved_mask = kcalloc(nr_regs, sizeof(u32),
286 GFP_KERNEL);
287 prcm_irq_setup->priority_mask = kcalloc(nr_regs, sizeof(u32),
288 GFP_KERNEL);
289
290 if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
291 !prcm_irq_setup->priority_mask)
292 goto err;
293
294 memset(mask, 0, sizeof(mask));
295
296 for (i = 0; i < irq_setup->nr_irqs; i++) {
297 offset = irq_setup->irqs[i].offset;
298 mask[offset >> 5] |= 1 << (offset & 0x1f);
299 if (irq_setup->irqs[i].priority)
300 irq_setup->priority_mask[offset >> 5] |=
301 1 << (offset & 0x1f);
302 }
303
304 irq = irq_setup->irq;
305 irq_set_chained_handler(irq, omap_prcm_irq_handler);
306
307 irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
308 0);
309
310 if (irq_setup->base_irq < 0) {
311 pr_err("PRCM: failed to allocate irq descs: %d\n",
312 irq_setup->base_irq);
313 goto err;
314 }
315
316 for (i = 0; i < irq_setup->nr_regs; i++) {
317 gc = irq_alloc_generic_chip("PRCM", 1,
318 irq_setup->base_irq + i * 32, prm_base.va,
319 handle_level_irq);
320
321 if (!gc) {
322 pr_err("PRCM: failed to allocate generic chip\n");
323 goto err;
324 }
325 ct = gc->chip_types;
326 ct->chip.irq_ack = irq_gc_ack_set_bit;
327 ct->chip.irq_mask = irq_gc_mask_clr_bit;
328 ct->chip.irq_unmask = irq_gc_mask_set_bit;
329
330 ct->regs.ack = irq_setup->ack + i * 4;
331 ct->regs.mask = irq_setup->mask + i * 4;
332
333 irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0);
334 prcm_irq_chips[i] = gc;
335 }
336
337 irq = omap_prcm_event_to_irq("io");
338 omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain);
339
340 return 0;
341
342err:
343 omap_prcm_irq_cleanup();
344 return -ENOMEM;
345}
346
347/**
348 * prm_was_any_context_lost_old - was device context lost? (old API)
349 * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
350 * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
351 * @idx: CONTEXT register offset
352 *
353 * Return 1 if any bits were set in the *_CONTEXT_* register
354 * identified by (@part, @inst, @idx), which means that some context
355 * was lost for that module; otherwise, return 0. XXX Deprecated;
356 * callers need to use a less-SoC-dependent way to identify hardware
357 * IP blocks.
358 */
359bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx)
360{
361 bool ret = true;
362
363 if (prm_ll_data->was_any_context_lost_old)
364 ret = prm_ll_data->was_any_context_lost_old(part, inst, idx);
365 else
366 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
367 __func__);
368
369 return ret;
370}
371
372/**
373 * prm_clear_context_lost_flags_old - clear context loss flags (old API)
374 * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
375 * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
376 * @idx: CONTEXT register offset
377 *
378 * Clear hardware context loss bits for the module identified by
379 * (@part, @inst, @idx). No return value. XXX Deprecated; callers
380 * need to use a less-SoC-dependent way to identify hardware IP
381 * blocks.
382 */
383void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx)
384{
385 if (prm_ll_data->clear_context_loss_flags_old)
386 prm_ll_data->clear_context_loss_flags_old(part, inst, idx);
387 else
388 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
389 __func__);
390}
391
392/**
393 * omap_prm_assert_hardreset - assert hardreset for an IP block
394 * @shift: register bit shift corresponding to the reset line
395 * @part: PRM partition
396 * @prm_mod: PRM submodule base or instance offset
397 * @offset: register offset
398 *
399 * Asserts a hardware reset line for an IP block.
400 */
401int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
402{
403 if (!prm_ll_data->assert_hardreset) {
404 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
405 __func__);
406 return -EINVAL;
407 }
408
409 return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset);
410}
411
412/**
413 * omap_prm_deassert_hardreset - deassert hardreset for an IP block
414 * @shift: register bit shift corresponding to the reset line
415 * @st_shift: reset status bit shift corresponding to the reset line
416 * @part: PRM partition
417 * @prm_mod: PRM submodule base or instance offset
418 * @offset: register offset
419 * @st_offset: status register offset
420 *
421 * Deasserts a hardware reset line for an IP block.
422 */
423int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
424 u16 offset, u16 st_offset)
425{
426 if (!prm_ll_data->deassert_hardreset) {
427 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
428 __func__);
429 return -EINVAL;
430 }
431
432 return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod,
433 offset, st_offset);
434}
435
436/**
437 * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block
438 * @shift: register bit shift corresponding to the reset line
439 * @part: PRM partition
440 * @prm_mod: PRM submodule base or instance offset
441 * @offset: register offset
442 *
443 * Checks if a hardware reset line for an IP block is enabled or not.
444 */
445int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
446{
447 if (!prm_ll_data->is_hardreset_asserted) {
448 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
449 __func__);
450 return -EINVAL;
451 }
452
453 return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset);
454}
455
456/**
457 * omap_prm_reset_system - trigger global SW reset
458 *
459 * Triggers SoC specific global warm reset to reboot the device.
460 */
461void omap_prm_reset_system(void)
462{
463 if (!prm_ll_data->reset_system) {
464 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
465 __func__);
466 return;
467 }
468
469 prm_ll_data->reset_system();
470
471 while (1) {
472 cpu_relax();
473 wfe();
474 }
475}
476
477/**
478 * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
479 * @module: PRM module to clear wakeups from
480 * @regs: register to clear
481 * @wkst_mask: wkst bits to clear
482 *
483 * Clears any wakeup events for the module and register set defined.
484 * Uses SoC specific implementation to do the actual wakeup status
485 * clearing.
486 */
487int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
488{
489 if (!prm_ll_data->clear_mod_irqs) {
490 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
491 __func__);
492 return -EINVAL;
493 }
494
495 return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask);
496}
497
498/**
499 * omap_prm_vp_check_txdone - check voltage processor TX done status
500 *
501 * Checks if voltage processor transmission has been completed.
502 * Returns non-zero if a transmission has completed, 0 otherwise.
503 */
504u32 omap_prm_vp_check_txdone(u8 vp_id)
505{
506 if (!prm_ll_data->vp_check_txdone) {
507 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
508 __func__);
509 return 0;
510 }
511
512 return prm_ll_data->vp_check_txdone(vp_id);
513}
514
515/**
516 * omap_prm_vp_clear_txdone - clears voltage processor TX done status
517 *
518 * Clears the status bit for completed voltage processor transmission
519 * returned by prm_vp_check_txdone.
520 */
521void omap_prm_vp_clear_txdone(u8 vp_id)
522{
523 if (!prm_ll_data->vp_clear_txdone) {
524 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
525 __func__);
526 return;
527 }
528
529 prm_ll_data->vp_clear_txdone(vp_id);
530}
531
532/**
533 * prm_register - register per-SoC low-level data with the PRM
534 * @pld: low-level per-SoC OMAP PRM data & function pointers to register
535 *
536 * Register per-SoC low-level OMAP PRM data and function pointers with
537 * the OMAP PRM common interface. The caller must keep the data
538 * pointed to by @pld valid until it calls prm_unregister() and
539 * it returns successfully. Returns 0 upon success, -EINVAL if @pld
540 * is NULL, or -EEXIST if prm_register() has already been called
541 * without an intervening prm_unregister().
542 */
543int prm_register(struct prm_ll_data *pld)
544{
545 if (!pld)
546 return -EINVAL;
547
548 if (prm_ll_data != &null_prm_ll_data)
549 return -EEXIST;
550
551 prm_ll_data = pld;
552
553 return 0;
554}
555
556/**
557 * prm_unregister - unregister per-SoC low-level data & function pointers
558 * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister
559 *
560 * Unregister per-SoC low-level OMAP PRM data and function pointers
561 * that were previously registered with prm_register(). The
562 * caller may not destroy any of the data pointed to by @pld until
563 * this function returns successfully. Returns 0 upon success, or
564 * -EINVAL if @pld is NULL or if @pld does not match the struct
565 * prm_ll_data * previously registered by prm_register().
566 */
567int prm_unregister(struct prm_ll_data *pld)
568{
569 if (!pld || prm_ll_data != pld)
570 return -EINVAL;
571
572 prm_ll_data = &null_prm_ll_data;
573
574 return 0;
575}
576
577#ifdef CONFIG_ARCH_OMAP2
578static struct omap_prcm_init_data omap2_prm_data __initdata = {
579 .index = TI_CLKM_PRM,
580 .init = omap2xxx_prm_init,
581};
582#endif
583
584#ifdef CONFIG_ARCH_OMAP3
585static struct omap_prcm_init_data omap3_prm_data __initdata = {
586 .index = TI_CLKM_PRM,
587 .init = omap3xxx_prm_init,
588
589 /*
590 * IVA2 offset is a negative value, must offset the prm_base
591 * address by this to get it to positive
592 */
593 .offset = -OMAP3430_IVA2_MOD,
594};
595#endif
596
597#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX)
598static struct omap_prcm_init_data am3_prm_data __initdata = {
599 .index = TI_CLKM_PRM,
600 .init = am33xx_prm_init,
601};
602#endif
603
604#ifdef CONFIG_SOC_TI81XX
605static struct omap_prcm_init_data dm814_pllss_data __initdata = {
606 .index = TI_CLKM_PLLSS,
607 .init = am33xx_prm_init,
608};
609#endif
610
611#ifdef CONFIG_ARCH_OMAP4
612static struct omap_prcm_init_data omap4_prm_data __initdata = {
613 .index = TI_CLKM_PRM,
614 .init = omap44xx_prm_init,
615 .device_inst_offset = OMAP4430_PRM_DEVICE_INST,
616 .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
617};
618#endif
619
620#ifdef CONFIG_SOC_OMAP5
621static struct omap_prcm_init_data omap5_prm_data __initdata = {
622 .index = TI_CLKM_PRM,
623 .init = omap44xx_prm_init,
624 .device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
625 .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
626};
627#endif
628
629#ifdef CONFIG_SOC_DRA7XX
630static struct omap_prcm_init_data dra7_prm_data __initdata = {
631 .index = TI_CLKM_PRM,
632 .init = omap44xx_prm_init,
633 .device_inst_offset = DRA7XX_PRM_DEVICE_INST,
634 .flags = PRM_HAS_IO_WAKEUP,
635};
636#endif
637
638#ifdef CONFIG_SOC_AM43XX
639static struct omap_prcm_init_data am4_prm_data __initdata = {
640 .index = TI_CLKM_PRM,
641 .init = omap44xx_prm_init,
642 .device_inst_offset = AM43XX_PRM_DEVICE_INST,
643 .flags = PRM_HAS_IO_WAKEUP,
644};
645#endif
646
647#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
648static struct omap_prcm_init_data scrm_data __initdata = {
649 .index = TI_CLKM_SCRM,
650};
651#endif
652
653static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
654#ifdef CONFIG_SOC_AM33XX
655 { .compatible = "ti,am3-prcm", .data = &am3_prm_data },
656#endif
657#ifdef CONFIG_SOC_AM43XX
658 { .compatible = "ti,am4-prcm", .data = &am4_prm_data },
659#endif
660#ifdef CONFIG_SOC_TI81XX
661 { .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
662 { .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
663 { .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
664#endif
665#ifdef CONFIG_ARCH_OMAP2
666 { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
667#endif
668#ifdef CONFIG_ARCH_OMAP3
669 { .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
670#endif
671#ifdef CONFIG_ARCH_OMAP4
672 { .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
673 { .compatible = "ti,omap4-scrm", .data = &scrm_data },
674#endif
675#ifdef CONFIG_SOC_OMAP5
676 { .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
677 { .compatible = "ti,omap5-scrm", .data = &scrm_data },
678#endif
679#ifdef CONFIG_SOC_DRA7XX
680 { .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
681#endif
682 { }
683};
684
685/**
686 * omap2_prm_base_init - initialize iomappings for the PRM driver
687 *
688 * Detects and initializes the iomappings for the PRM driver, based
689 * on the DT data. Returns 0 in success, negative error value
690 * otherwise.
691 */
692static int __init omap2_prm_base_init(void)
693{
694 struct device_node *np;
695 const struct of_device_id *match;
696 struct omap_prcm_init_data *data;
697 struct resource res;
698 int ret;
699
700 for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
701 data = (struct omap_prcm_init_data *)match->data;
702
703 ret = of_address_to_resource(np, 0, &res);
704 if (ret) {
705 of_node_put(np);
706 return ret;
707 }
708
709 data->mem = ioremap(res.start, resource_size(&res));
710
711 if (data->index == TI_CLKM_PRM) {
712 prm_base.va = data->mem + data->offset;
713 prm_base.pa = res.start + data->offset;
714 }
715
716 data->np = np;
717
718 if (data->init)
719 data->init(data);
720 }
721
722 return 0;
723}
724
725int __init omap2_prcm_base_init(void)
726{
727 int ret;
728
729 ret = omap2_prm_base_init();
730 if (ret)
731 return ret;
732
733 return omap2_cm_base_init();
734}
735
736/**
737 * omap_prcm_init - low level init for the PRCM drivers
738 *
739 * Initializes the low level clock infrastructure for PRCM drivers.
740 * Returns 0 in success, negative error value in failure.
741 */
742int __init omap_prcm_init(void)
743{
744 struct device_node *np;
745 const struct of_device_id *match;
746 const struct omap_prcm_init_data *data;
747 int ret;
748
749 for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
750 data = match->data;
751
752 ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
753 if (ret) {
754 of_node_put(np);
755 return ret;
756 }
757 }
758
759 omap_cm_init();
760
761 return 0;
762}
763
764static int __init prm_late_init(void)
765{
766 if (prm_ll_data->late_init)
767 return prm_ll_data->late_init();
768 return 0;
769}
770subsys_initcall(prm_late_init);
1/*
2 * OMAP2+ common Power & Reset Management (PRM) IP block functions
3 *
4 * Copyright (C) 2011 Texas Instruments, Inc.
5 * Tero Kristo <t-kristo@ti.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 *
12 * For historical purposes, the API used to configure the PRM
13 * interrupt handler refers to it as the "PRCM interrupt." The
14 * underlying registers are located in the PRM on OMAP3/4.
15 *
16 * XXX This code should eventually be moved to a PRM driver.
17 */
18
19#include <linux/kernel.h>
20#include <linux/module.h>
21#include <linux/init.h>
22#include <linux/io.h>
23#include <linux/irq.h>
24#include <linux/interrupt.h>
25#include <linux/slab.h>
26#include <linux/of.h>
27#include <linux/of_address.h>
28#include <linux/clk-provider.h>
29#include <linux/clk/ti.h>
30
31#include "soc.h"
32#include "prm2xxx_3xxx.h"
33#include "prm2xxx.h"
34#include "prm3xxx.h"
35#include "prm33xx.h"
36#include "prm44xx.h"
37#include "prm54xx.h"
38#include "prm7xx.h"
39#include "prcm43xx.h"
40#include "common.h"
41#include "clock.h"
42#include "cm.h"
43#include "control.h"
44
45/*
46 * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
47 * XXX this is technically not needed, since
48 * omap_prcm_register_chain_handler() could allocate this based on the
49 * actual amount of memory needed for the SoC
50 */
51#define OMAP_PRCM_MAX_NR_PENDING_REG 2
52
53/*
54 * prcm_irq_chips: an array of all of the "generic IRQ chips" in use
55 * by the PRCM interrupt handler code. There will be one 'chip' per
56 * PRM_{IRQSTATUS,IRQENABLE}_MPU register pair. (So OMAP3 will have
57 * one "chip" and OMAP4 will have two.)
58 */
59static struct irq_chip_generic **prcm_irq_chips;
60
61/*
62 * prcm_irq_setup: the PRCM IRQ parameters for the hardware the code
63 * is currently running on. Defined and passed by initialization code
64 * that calls omap_prcm_register_chain_handler().
65 */
66static struct omap_prcm_irq_setup *prcm_irq_setup;
67
68/* prm_base: base virtual address of the PRM IP block */
69void __iomem *prm_base;
70
71u16 prm_features;
72
73/*
74 * prm_ll_data: function pointers to SoC-specific implementations of
75 * common PRM functions
76 */
77static struct prm_ll_data null_prm_ll_data;
78static struct prm_ll_data *prm_ll_data = &null_prm_ll_data;
79
80/* Private functions */
81
82/*
83 * Move priority events from events to priority_events array
84 */
85static void omap_prcm_events_filter_priority(unsigned long *events,
86 unsigned long *priority_events)
87{
88 int i;
89
90 for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
91 priority_events[i] =
92 events[i] & prcm_irq_setup->priority_mask[i];
93 events[i] ^= priority_events[i];
94 }
95}
96
97/*
98 * PRCM Interrupt Handler
99 *
100 * This is a common handler for the OMAP PRCM interrupts. Pending
101 * interrupts are detected by a call to prcm_pending_events and
102 * dispatched accordingly. Clearing of the wakeup events should be
103 * done by the SoC specific individual handlers.
104 */
105static void omap_prcm_irq_handler(struct irq_desc *desc)
106{
107 unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG];
108 unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
109 struct irq_chip *chip = irq_desc_get_chip(desc);
110 unsigned int virtirq;
111 int nr_irq = prcm_irq_setup->nr_regs * 32;
112
113 /*
114 * If we are suspended, mask all interrupts from PRCM level,
115 * this does not ack them, and they will be pending until we
116 * re-enable the interrupts, at which point the
117 * omap_prcm_irq_handler will be executed again. The
118 * _save_and_clear_irqen() function must ensure that the PRM
119 * write to disable all IRQs has reached the PRM before
120 * returning, or spurious PRCM interrupts may occur during
121 * suspend.
122 */
123 if (prcm_irq_setup->suspended) {
124 prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask);
125 prcm_irq_setup->suspend_save_flag = true;
126 }
127
128 /*
129 * Loop until all pending irqs are handled, since
130 * generic_handle_irq() can cause new irqs to come
131 */
132 while (!prcm_irq_setup->suspended) {
133 prcm_irq_setup->read_pending_irqs(pending);
134
135 /* No bit set, then all IRQs are handled */
136 if (find_first_bit(pending, nr_irq) >= nr_irq)
137 break;
138
139 omap_prcm_events_filter_priority(pending, priority_pending);
140
141 /*
142 * Loop on all currently pending irqs so that new irqs
143 * cannot starve previously pending irqs
144 */
145
146 /* Serve priority events first */
147 for_each_set_bit(virtirq, priority_pending, nr_irq)
148 generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
149
150 /* Serve normal events next */
151 for_each_set_bit(virtirq, pending, nr_irq)
152 generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
153 }
154 if (chip->irq_ack)
155 chip->irq_ack(&desc->irq_data);
156 if (chip->irq_eoi)
157 chip->irq_eoi(&desc->irq_data);
158 chip->irq_unmask(&desc->irq_data);
159
160 prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */
161}
162
163/* Public functions */
164
165/**
166 * omap_prcm_event_to_irq - given a PRCM event name, returns the
167 * corresponding IRQ on which the handler should be registered
168 * @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq
169 *
170 * Returns the Linux internal IRQ ID corresponding to @name upon success,
171 * or -ENOENT upon failure.
172 */
173int omap_prcm_event_to_irq(const char *name)
174{
175 int i;
176
177 if (!prcm_irq_setup || !name)
178 return -ENOENT;
179
180 for (i = 0; i < prcm_irq_setup->nr_irqs; i++)
181 if (!strcmp(prcm_irq_setup->irqs[i].name, name))
182 return prcm_irq_setup->base_irq +
183 prcm_irq_setup->irqs[i].offset;
184
185 return -ENOENT;
186}
187
188/**
189 * omap_prcm_irq_cleanup - reverses memory allocated and other steps
190 * done by omap_prcm_register_chain_handler()
191 *
192 * No return value.
193 */
194void omap_prcm_irq_cleanup(void)
195{
196 unsigned int irq;
197 int i;
198
199 if (!prcm_irq_setup) {
200 pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n");
201 return;
202 }
203
204 if (prcm_irq_chips) {
205 for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
206 if (prcm_irq_chips[i])
207 irq_remove_generic_chip(prcm_irq_chips[i],
208 0xffffffff, 0, 0);
209 prcm_irq_chips[i] = NULL;
210 }
211 kfree(prcm_irq_chips);
212 prcm_irq_chips = NULL;
213 }
214
215 kfree(prcm_irq_setup->saved_mask);
216 prcm_irq_setup->saved_mask = NULL;
217
218 kfree(prcm_irq_setup->priority_mask);
219 prcm_irq_setup->priority_mask = NULL;
220
221 if (prcm_irq_setup->xlate_irq)
222 irq = prcm_irq_setup->xlate_irq(prcm_irq_setup->irq);
223 else
224 irq = prcm_irq_setup->irq;
225 irq_set_chained_handler(irq, NULL);
226
227 if (prcm_irq_setup->base_irq > 0)
228 irq_free_descs(prcm_irq_setup->base_irq,
229 prcm_irq_setup->nr_regs * 32);
230 prcm_irq_setup->base_irq = 0;
231}
232
233void omap_prcm_irq_prepare(void)
234{
235 prcm_irq_setup->suspended = true;
236}
237
238void omap_prcm_irq_complete(void)
239{
240 prcm_irq_setup->suspended = false;
241
242 /* If we have not saved the masks, do not attempt to restore */
243 if (!prcm_irq_setup->suspend_save_flag)
244 return;
245
246 prcm_irq_setup->suspend_save_flag = false;
247
248 /*
249 * Re-enable all masked PRCM irq sources, this causes the PRCM
250 * interrupt to fire immediately if the events were masked
251 * previously in the chain handler
252 */
253 prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask);
254}
255
256/**
257 * omap_prcm_register_chain_handler - initializes the prcm chained interrupt
258 * handler based on provided parameters
259 * @irq_setup: hardware data about the underlying PRM/PRCM
260 *
261 * Set up the PRCM chained interrupt handler on the PRCM IRQ. Sets up
262 * one generic IRQ chip per PRM interrupt status/enable register pair.
263 * Returns 0 upon success, -EINVAL if called twice or if invalid
264 * arguments are passed, or -ENOMEM on any other error.
265 */
266int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
267{
268 int nr_regs;
269 u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
270 int offset, i;
271 struct irq_chip_generic *gc;
272 struct irq_chip_type *ct;
273 unsigned int irq;
274
275 if (!irq_setup)
276 return -EINVAL;
277
278 nr_regs = irq_setup->nr_regs;
279
280 if (prcm_irq_setup) {
281 pr_err("PRCM: already initialized; won't reinitialize\n");
282 return -EINVAL;
283 }
284
285 if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) {
286 pr_err("PRCM: nr_regs too large\n");
287 return -EINVAL;
288 }
289
290 prcm_irq_setup = irq_setup;
291
292 prcm_irq_chips = kzalloc(sizeof(void *) * nr_regs, GFP_KERNEL);
293 prcm_irq_setup->saved_mask = kzalloc(sizeof(u32) * nr_regs, GFP_KERNEL);
294 prcm_irq_setup->priority_mask = kzalloc(sizeof(u32) * nr_regs,
295 GFP_KERNEL);
296
297 if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
298 !prcm_irq_setup->priority_mask) {
299 pr_err("PRCM: kzalloc failed\n");
300 goto err;
301 }
302
303 memset(mask, 0, sizeof(mask));
304
305 for (i = 0; i < irq_setup->nr_irqs; i++) {
306 offset = irq_setup->irqs[i].offset;
307 mask[offset >> 5] |= 1 << (offset & 0x1f);
308 if (irq_setup->irqs[i].priority)
309 irq_setup->priority_mask[offset >> 5] |=
310 1 << (offset & 0x1f);
311 }
312
313 if (irq_setup->xlate_irq)
314 irq = irq_setup->xlate_irq(irq_setup->irq);
315 else
316 irq = irq_setup->irq;
317 irq_set_chained_handler(irq, omap_prcm_irq_handler);
318
319 irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
320 0);
321
322 if (irq_setup->base_irq < 0) {
323 pr_err("PRCM: failed to allocate irq descs: %d\n",
324 irq_setup->base_irq);
325 goto err;
326 }
327
328 for (i = 0; i < irq_setup->nr_regs; i++) {
329 gc = irq_alloc_generic_chip("PRCM", 1,
330 irq_setup->base_irq + i * 32, prm_base,
331 handle_level_irq);
332
333 if (!gc) {
334 pr_err("PRCM: failed to allocate generic chip\n");
335 goto err;
336 }
337 ct = gc->chip_types;
338 ct->chip.irq_ack = irq_gc_ack_set_bit;
339 ct->chip.irq_mask = irq_gc_mask_clr_bit;
340 ct->chip.irq_unmask = irq_gc_mask_set_bit;
341
342 ct->regs.ack = irq_setup->ack + i * 4;
343 ct->regs.mask = irq_setup->mask + i * 4;
344
345 irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0);
346 prcm_irq_chips[i] = gc;
347 }
348
349 if (of_have_populated_dt()) {
350 int irq = omap_prcm_event_to_irq("io");
351 omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain);
352 }
353
354 return 0;
355
356err:
357 omap_prcm_irq_cleanup();
358 return -ENOMEM;
359}
360
361/**
362 * omap2_set_globals_prm - set the PRM base address (for early use)
363 * @prm: PRM base virtual address
364 *
365 * XXX Will be replaced when the PRM/CM drivers are completed.
366 */
367void __init omap2_set_globals_prm(void __iomem *prm)
368{
369 prm_base = prm;
370}
371
372/**
373 * prm_read_reset_sources - return the sources of the SoC's last reset
374 *
375 * Return a u32 bitmask representing the reset sources that caused the
376 * SoC to reset. The low-level per-SoC functions called by this
377 * function remap the SoC-specific reset source bits into an
378 * OMAP-common set of reset source bits, defined in
379 * arch/arm/mach-omap2/prm.h. Returns the standardized reset source
380 * u32 bitmask from the hardware upon success, or returns (1 <<
381 * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources()
382 * function was registered.
383 */
384u32 prm_read_reset_sources(void)
385{
386 u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT;
387
388 if (prm_ll_data->read_reset_sources)
389 ret = prm_ll_data->read_reset_sources();
390 else
391 WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__);
392
393 return ret;
394}
395
396/**
397 * prm_was_any_context_lost_old - was device context lost? (old API)
398 * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
399 * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
400 * @idx: CONTEXT register offset
401 *
402 * Return 1 if any bits were set in the *_CONTEXT_* register
403 * identified by (@part, @inst, @idx), which means that some context
404 * was lost for that module; otherwise, return 0. XXX Deprecated;
405 * callers need to use a less-SoC-dependent way to identify hardware
406 * IP blocks.
407 */
408bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx)
409{
410 bool ret = true;
411
412 if (prm_ll_data->was_any_context_lost_old)
413 ret = prm_ll_data->was_any_context_lost_old(part, inst, idx);
414 else
415 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
416 __func__);
417
418 return ret;
419}
420
421/**
422 * prm_clear_context_lost_flags_old - clear context loss flags (old API)
423 * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
424 * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
425 * @idx: CONTEXT register offset
426 *
427 * Clear hardware context loss bits for the module identified by
428 * (@part, @inst, @idx). No return value. XXX Deprecated; callers
429 * need to use a less-SoC-dependent way to identify hardware IP
430 * blocks.
431 */
432void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx)
433{
434 if (prm_ll_data->clear_context_loss_flags_old)
435 prm_ll_data->clear_context_loss_flags_old(part, inst, idx);
436 else
437 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
438 __func__);
439}
440
441/**
442 * omap_prm_assert_hardreset - assert hardreset for an IP block
443 * @shift: register bit shift corresponding to the reset line
444 * @part: PRM partition
445 * @prm_mod: PRM submodule base or instance offset
446 * @offset: register offset
447 *
448 * Asserts a hardware reset line for an IP block.
449 */
450int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
451{
452 if (!prm_ll_data->assert_hardreset) {
453 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
454 __func__);
455 return -EINVAL;
456 }
457
458 return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset);
459}
460
461/**
462 * omap_prm_deassert_hardreset - deassert hardreset for an IP block
463 * @shift: register bit shift corresponding to the reset line
464 * @st_shift: reset status bit shift corresponding to the reset line
465 * @part: PRM partition
466 * @prm_mod: PRM submodule base or instance offset
467 * @offset: register offset
468 * @st_offset: status register offset
469 *
470 * Deasserts a hardware reset line for an IP block.
471 */
472int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
473 u16 offset, u16 st_offset)
474{
475 if (!prm_ll_data->deassert_hardreset) {
476 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
477 __func__);
478 return -EINVAL;
479 }
480
481 return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod,
482 offset, st_offset);
483}
484
485/**
486 * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block
487 * @shift: register bit shift corresponding to the reset line
488 * @part: PRM partition
489 * @prm_mod: PRM submodule base or instance offset
490 * @offset: register offset
491 *
492 * Checks if a hardware reset line for an IP block is enabled or not.
493 */
494int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
495{
496 if (!prm_ll_data->is_hardreset_asserted) {
497 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
498 __func__);
499 return -EINVAL;
500 }
501
502 return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset);
503}
504
505/**
506 * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
507 *
508 * Clear any previously-latched I/O wakeup events and ensure that the
509 * I/O wakeup gates are aligned with the current mux settings.
510 * Calls SoC specific I/O chain reconfigure function if available,
511 * otherwise does nothing.
512 */
513void omap_prm_reconfigure_io_chain(void)
514{
515 if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain)
516 return;
517
518 prcm_irq_setup->reconfigure_io_chain();
519}
520
521/**
522 * omap_prm_reset_system - trigger global SW reset
523 *
524 * Triggers SoC specific global warm reset to reboot the device.
525 */
526void omap_prm_reset_system(void)
527{
528 if (!prm_ll_data->reset_system) {
529 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
530 __func__);
531 return;
532 }
533
534 prm_ll_data->reset_system();
535
536 while (1)
537 cpu_relax();
538}
539
540/**
541 * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
542 * @module: PRM module to clear wakeups from
543 * @regs: register to clear
544 * @wkst_mask: wkst bits to clear
545 *
546 * Clears any wakeup events for the module and register set defined.
547 * Uses SoC specific implementation to do the actual wakeup status
548 * clearing.
549 */
550int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
551{
552 if (!prm_ll_data->clear_mod_irqs) {
553 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
554 __func__);
555 return -EINVAL;
556 }
557
558 return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask);
559}
560
561/**
562 * omap_prm_vp_check_txdone - check voltage processor TX done status
563 *
564 * Checks if voltage processor transmission has been completed.
565 * Returns non-zero if a transmission has completed, 0 otherwise.
566 */
567u32 omap_prm_vp_check_txdone(u8 vp_id)
568{
569 if (!prm_ll_data->vp_check_txdone) {
570 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
571 __func__);
572 return 0;
573 }
574
575 return prm_ll_data->vp_check_txdone(vp_id);
576}
577
578/**
579 * omap_prm_vp_clear_txdone - clears voltage processor TX done status
580 *
581 * Clears the status bit for completed voltage processor transmission
582 * returned by prm_vp_check_txdone.
583 */
584void omap_prm_vp_clear_txdone(u8 vp_id)
585{
586 if (!prm_ll_data->vp_clear_txdone) {
587 WARN_ONCE(1, "prm: %s: no mapping function defined\n",
588 __func__);
589 return;
590 }
591
592 prm_ll_data->vp_clear_txdone(vp_id);
593}
594
595/**
596 * prm_register - register per-SoC low-level data with the PRM
597 * @pld: low-level per-SoC OMAP PRM data & function pointers to register
598 *
599 * Register per-SoC low-level OMAP PRM data and function pointers with
600 * the OMAP PRM common interface. The caller must keep the data
601 * pointed to by @pld valid until it calls prm_unregister() and
602 * it returns successfully. Returns 0 upon success, -EINVAL if @pld
603 * is NULL, or -EEXIST if prm_register() has already been called
604 * without an intervening prm_unregister().
605 */
606int prm_register(struct prm_ll_data *pld)
607{
608 if (!pld)
609 return -EINVAL;
610
611 if (prm_ll_data != &null_prm_ll_data)
612 return -EEXIST;
613
614 prm_ll_data = pld;
615
616 return 0;
617}
618
619/**
620 * prm_unregister - unregister per-SoC low-level data & function pointers
621 * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister
622 *
623 * Unregister per-SoC low-level OMAP PRM data and function pointers
624 * that were previously registered with prm_register(). The
625 * caller may not destroy any of the data pointed to by @pld until
626 * this function returns successfully. Returns 0 upon success, or
627 * -EINVAL if @pld is NULL or if @pld does not match the struct
628 * prm_ll_data * previously registered by prm_register().
629 */
630int prm_unregister(struct prm_ll_data *pld)
631{
632 if (!pld || prm_ll_data != pld)
633 return -EINVAL;
634
635 prm_ll_data = &null_prm_ll_data;
636
637 return 0;
638}
639
640#ifdef CONFIG_ARCH_OMAP2
641static struct omap_prcm_init_data omap2_prm_data __initdata = {
642 .index = TI_CLKM_PRM,
643 .init = omap2xxx_prm_init,
644};
645#endif
646
647#ifdef CONFIG_ARCH_OMAP3
648static struct omap_prcm_init_data omap3_prm_data __initdata = {
649 .index = TI_CLKM_PRM,
650 .init = omap3xxx_prm_init,
651
652 /*
653 * IVA2 offset is a negative value, must offset the prm_base
654 * address by this to get it to positive
655 */
656 .offset = -OMAP3430_IVA2_MOD,
657};
658#endif
659
660#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX)
661static struct omap_prcm_init_data am3_prm_data __initdata = {
662 .index = TI_CLKM_PRM,
663 .init = am33xx_prm_init,
664};
665#endif
666
667#ifdef CONFIG_SOC_TI81XX
668static struct omap_prcm_init_data dm814_pllss_data __initdata = {
669 .index = TI_CLKM_PLLSS,
670 .init = am33xx_prm_init,
671};
672#endif
673
674#ifdef CONFIG_ARCH_OMAP4
675static struct omap_prcm_init_data omap4_prm_data __initdata = {
676 .index = TI_CLKM_PRM,
677 .init = omap44xx_prm_init,
678 .device_inst_offset = OMAP4430_PRM_DEVICE_INST,
679 .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE | PRM_IRQ_DEFAULT,
680};
681#endif
682
683#ifdef CONFIG_SOC_OMAP5
684static struct omap_prcm_init_data omap5_prm_data __initdata = {
685 .index = TI_CLKM_PRM,
686 .init = omap44xx_prm_init,
687 .device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
688 .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
689};
690#endif
691
692#ifdef CONFIG_SOC_DRA7XX
693static struct omap_prcm_init_data dra7_prm_data __initdata = {
694 .index = TI_CLKM_PRM,
695 .init = omap44xx_prm_init,
696 .device_inst_offset = DRA7XX_PRM_DEVICE_INST,
697 .flags = PRM_HAS_IO_WAKEUP,
698};
699#endif
700
701#ifdef CONFIG_SOC_AM43XX
702static struct omap_prcm_init_data am4_prm_data __initdata = {
703 .index = TI_CLKM_PRM,
704 .init = omap44xx_prm_init,
705 .device_inst_offset = AM43XX_PRM_DEVICE_INST,
706 .flags = PRM_HAS_IO_WAKEUP,
707};
708#endif
709
710#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
711static struct omap_prcm_init_data scrm_data __initdata = {
712 .index = TI_CLKM_SCRM,
713};
714#endif
715
716static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
717#ifdef CONFIG_SOC_AM33XX
718 { .compatible = "ti,am3-prcm", .data = &am3_prm_data },
719#endif
720#ifdef CONFIG_SOC_AM43XX
721 { .compatible = "ti,am4-prcm", .data = &am4_prm_data },
722#endif
723#ifdef CONFIG_SOC_TI81XX
724 { .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
725 { .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
726 { .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
727#endif
728#ifdef CONFIG_ARCH_OMAP2
729 { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
730#endif
731#ifdef CONFIG_ARCH_OMAP3
732 { .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
733#endif
734#ifdef CONFIG_ARCH_OMAP4
735 { .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
736 { .compatible = "ti,omap4-scrm", .data = &scrm_data },
737#endif
738#ifdef CONFIG_SOC_OMAP5
739 { .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
740 { .compatible = "ti,omap5-scrm", .data = &scrm_data },
741#endif
742#ifdef CONFIG_SOC_DRA7XX
743 { .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
744#endif
745 { }
746};
747
748/**
749 * omap2_prm_base_init - initialize iomappings for the PRM driver
750 *
751 * Detects and initializes the iomappings for the PRM driver, based
752 * on the DT data. Returns 0 in success, negative error value
753 * otherwise.
754 */
755int __init omap2_prm_base_init(void)
756{
757 struct device_node *np;
758 const struct of_device_id *match;
759 struct omap_prcm_init_data *data;
760 void __iomem *mem;
761
762 for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
763 data = (struct omap_prcm_init_data *)match->data;
764
765 mem = of_iomap(np, 0);
766 if (!mem)
767 return -ENOMEM;
768
769 if (data->index == TI_CLKM_PRM)
770 prm_base = mem + data->offset;
771
772 data->mem = mem;
773
774 data->np = np;
775
776 if (data->init)
777 data->init(data);
778 }
779
780 return 0;
781}
782
783int __init omap2_prcm_base_init(void)
784{
785 int ret;
786
787 ret = omap2_prm_base_init();
788 if (ret)
789 return ret;
790
791 return omap2_cm_base_init();
792}
793
794/**
795 * omap_prcm_init - low level init for the PRCM drivers
796 *
797 * Initializes the low level clock infrastructure for PRCM drivers.
798 * Returns 0 in success, negative error value in failure.
799 */
800int __init omap_prcm_init(void)
801{
802 struct device_node *np;
803 const struct of_device_id *match;
804 const struct omap_prcm_init_data *data;
805 int ret;
806
807 for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
808 data = match->data;
809
810 ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
811 if (ret)
812 return ret;
813 }
814
815 omap_cm_init();
816
817 return 0;
818}
819
820static int __init prm_late_init(void)
821{
822 if (prm_ll_data->late_init)
823 return prm_ll_data->late_init();
824 return 0;
825}
826subsys_initcall(prm_late_init);