Linux Audio

Check our new training course

Loading...
v6.8
   1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2/*
   3 * core.c - DesignWare HS OTG Controller common routines
   4 *
   5 * Copyright (C) 2004-2013 Synopsys, Inc.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   6 */
   7
   8/*
   9 * The Core code provides basic services for accessing and managing the
  10 * DWC_otg hardware. These services are used by both the Host Controller
  11 * Driver and the Peripheral Controller Driver.
  12 */
  13#include <linux/kernel.h>
  14#include <linux/module.h>
  15#include <linux/moduleparam.h>
  16#include <linux/spinlock.h>
  17#include <linux/interrupt.h>
  18#include <linux/dma-mapping.h>
  19#include <linux/delay.h>
  20#include <linux/io.h>
  21#include <linux/slab.h>
  22#include <linux/usb.h>
  23
  24#include <linux/usb/hcd.h>
  25#include <linux/usb/ch11.h>
  26
  27#include "core.h"
  28#include "hcd.h"
  29
  30/**
  31 * dwc2_backup_global_registers() - Backup global controller registers.
  32 * When suspending usb bus, registers needs to be backuped
  33 * if controller power is disabled once suspended.
  34 *
  35 * @hsotg: Programming view of the DWC_otg controller
  36 */
  37int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
  38{
  39	struct dwc2_gregs_backup *gr;
  40
  41	dev_dbg(hsotg->dev, "%s\n", __func__);
  42
  43	/* Backup global regs */
  44	gr = &hsotg->gr_backup;
  45
  46	gr->gotgctl = dwc2_readl(hsotg, GOTGCTL);
  47	gr->gintmsk = dwc2_readl(hsotg, GINTMSK);
  48	gr->gahbcfg = dwc2_readl(hsotg, GAHBCFG);
  49	gr->gusbcfg = dwc2_readl(hsotg, GUSBCFG);
  50	gr->grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
  51	gr->gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ);
  52	gr->gdfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
  53	gr->pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
  54	gr->glpmcfg = dwc2_readl(hsotg, GLPMCFG);
  55	gr->gi2cctl = dwc2_readl(hsotg, GI2CCTL);
  56	gr->pcgcctl = dwc2_readl(hsotg, PCGCTL);
  57
  58	gr->valid = true;
  59	return 0;
  60}
  61
  62/**
  63 * dwc2_restore_global_registers() - Restore controller global registers.
  64 * When resuming usb bus, device registers needs to be restored
  65 * if controller power were disabled.
  66 *
  67 * @hsotg: Programming view of the DWC_otg controller
  68 */
  69int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg)
  70{
  71	struct dwc2_gregs_backup *gr;
  72
  73	dev_dbg(hsotg->dev, "%s\n", __func__);
  74
  75	/* Restore global regs */
  76	gr = &hsotg->gr_backup;
  77	if (!gr->valid) {
  78		dev_err(hsotg->dev, "%s: no global registers to restore\n",
  79			__func__);
  80		return -EINVAL;
  81	}
  82	gr->valid = false;
  83
  84	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
  85	dwc2_writel(hsotg, gr->gotgctl, GOTGCTL);
  86	dwc2_writel(hsotg, gr->gintmsk, GINTMSK);
  87	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
  88	dwc2_writel(hsotg, gr->gahbcfg, GAHBCFG);
  89	dwc2_writel(hsotg, gr->grxfsiz, GRXFSIZ);
  90	dwc2_writel(hsotg, gr->gnptxfsiz, GNPTXFSIZ);
  91	dwc2_writel(hsotg, gr->gdfifocfg, GDFIFOCFG);
  92	dwc2_writel(hsotg, gr->pcgcctl1, PCGCCTL1);
  93	dwc2_writel(hsotg, gr->glpmcfg, GLPMCFG);
  94	dwc2_writel(hsotg, gr->pcgcctl, PCGCTL);
  95	dwc2_writel(hsotg, gr->gi2cctl, GI2CCTL);
  96
  97	return 0;
  98}
  99
 100/**
 101 * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down.
 102 *
 103 * @hsotg: Programming view of the DWC_otg controller
 104 * @rem_wakeup: indicates whether resume is initiated by Reset.
 105 * @restore: Controller registers need to be restored
 106 */
 107int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
 108				 bool restore)
 109{
 110	struct dwc2_gregs_backup *gr;
 
 111
 112	gr = &hsotg->gr_backup;
 
 113
 114	/*
 115	 * Restore host or device regisers with the same mode core enterted
 116	 * to partial power down by checking "GOTGCTL_CURMODE_HOST" backup
 117	 * value of the "gotgctl" register.
 118	 */
 119	if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
 120		return dwc2_host_exit_partial_power_down(hsotg, rem_wakeup,
 121							 restore);
 122	else
 123		return dwc2_gadget_exit_partial_power_down(hsotg, restore);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 124}
 125
 126/**
 127 * dwc2_enter_partial_power_down() - Put controller in Partial Power Down.
 128 *
 129 * @hsotg: Programming view of the DWC_otg controller
 130 */
 131int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
 132{
 133	if (dwc2_is_host_mode(hsotg))
 134		return dwc2_host_enter_partial_power_down(hsotg);
 135	else
 136		return dwc2_gadget_enter_partial_power_down(hsotg);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 137}
 138
 139/**
 140 * dwc2_restore_essential_regs() - Restore essiential regs of core.
 141 *
 142 * @hsotg: Programming view of the DWC_otg controller
 143 * @rmode: Restore mode, enabled in case of remote-wakeup.
 144 * @is_host: Host or device mode.
 145 */
 146static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode,
 147					int is_host)
 148{
 149	u32 pcgcctl;
 150	struct dwc2_gregs_backup *gr;
 151	struct dwc2_dregs_backup *dr;
 152	struct dwc2_hregs_backup *hr;
 153
 154	gr = &hsotg->gr_backup;
 155	dr = &hsotg->dr_backup;
 156	hr = &hsotg->hr_backup;
 157
 158	dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__);
 159
 160	/* Load restore values for [31:14] bits */
 161	pcgcctl = (gr->pcgcctl & 0xffffc000);
 162	/* If High Speed */
 163	if (is_host) {
 164		if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK))
 165			pcgcctl |= BIT(17);
 166	} else {
 167		if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK))
 168			pcgcctl |= BIT(17);
 169	}
 170	dwc2_writel(hsotg, pcgcctl, PCGCTL);
 171
 172	/* Umnask global Interrupt in GAHBCFG and restore it */
 173	dwc2_writel(hsotg, gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, GAHBCFG);
 174
 175	/* Clear all pending interupts */
 176	dwc2_writel(hsotg, 0xffffffff, GINTSTS);
 177
 178	/* Unmask restore done interrupt */
 179	dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTMSK);
 180
 181	/* Restore GUSBCFG and HCFG/DCFG */
 182	dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
 183
 184	if (is_host) {
 185		dwc2_writel(hsotg, hr->hcfg, HCFG);
 186		if (rmode)
 187			pcgcctl |= PCGCTL_RESTOREMODE;
 188		dwc2_writel(hsotg, pcgcctl, PCGCTL);
 189		udelay(10);
 190
 191		pcgcctl |= PCGCTL_ESS_REG_RESTORED;
 192		dwc2_writel(hsotg, pcgcctl, PCGCTL);
 193		udelay(10);
 194	} else {
 195		dwc2_writel(hsotg, dr->dcfg, DCFG);
 196		if (!rmode)
 197			pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE;
 198		dwc2_writel(hsotg, pcgcctl, PCGCTL);
 199		udelay(10);
 200
 201		pcgcctl |= PCGCTL_ESS_REG_RESTORED;
 202		dwc2_writel(hsotg, pcgcctl, PCGCTL);
 203		udelay(10);
 204	}
 205}
 206
 207/**
 208 * dwc2_hib_restore_common() - Common part of restore routine.
 209 *
 210 * @hsotg: Programming view of the DWC_otg controller
 211 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
 212 * @is_host: Host or device mode.
 213 */
 214void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
 215			     int is_host)
 216{
 217	u32 gpwrdn;
 218
 219	/* Switch-on voltage to the core */
 220	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 221	gpwrdn &= ~GPWRDN_PWRDNSWTCH;
 222	dwc2_writel(hsotg, gpwrdn, GPWRDN);
 223	udelay(10);
 224
 225	/* Reset core */
 226	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 227	gpwrdn &= ~GPWRDN_PWRDNRSTN;
 228	dwc2_writel(hsotg, gpwrdn, GPWRDN);
 229	udelay(10);
 230
 231	/* Enable restore from PMU */
 232	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 233	gpwrdn |= GPWRDN_RESTORE;
 234	dwc2_writel(hsotg, gpwrdn, GPWRDN);
 235	udelay(10);
 236
 237	/* Disable Power Down Clamp */
 238	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 239	gpwrdn &= ~GPWRDN_PWRDNCLMP;
 240	dwc2_writel(hsotg, gpwrdn, GPWRDN);
 241	udelay(50);
 242
 243	if (!is_host && rem_wakeup)
 244		udelay(70);
 245
 246	/* Deassert reset core */
 247	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 248	gpwrdn |= GPWRDN_PWRDNRSTN;
 249	dwc2_writel(hsotg, gpwrdn, GPWRDN);
 250	udelay(10);
 251
 252	/* Disable PMU interrupt */
 253	gpwrdn = dwc2_readl(hsotg, GPWRDN);
 254	gpwrdn &= ~GPWRDN_PMUINTSEL;
 255	dwc2_writel(hsotg, gpwrdn, GPWRDN);
 256	udelay(10);
 257
 258	/* Set Restore Essential Regs bit in PCGCCTL register */
 259	dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host);
 260
 261	/*
 262	 * Wait For Restore_done Interrupt. This mechanism of polling the
 263	 * interrupt is introduced to avoid any possible race conditions
 264	 */
 265	if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE,
 266				    20000)) {
 267		dev_dbg(hsotg->dev,
 268			"%s: Restore Done wasn't generated here\n",
 269			__func__);
 270	} else {
 271		dev_dbg(hsotg->dev, "restore done  generated here\n");
 272
 273		/*
 274		 * To avoid restore done interrupt storm after restore is
 275		 * generated clear GINTSTS_RESTOREDONE bit.
 276		 */
 277		dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTSTS);
 278	}
 279}
 280
 281/**
 282 * dwc2_wait_for_mode() - Waits for the controller mode.
 283 * @hsotg:	Programming view of the DWC_otg controller.
 284 * @host_mode:	If true, waits for host mode, otherwise device mode.
 285 */
 286static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
 287			       bool host_mode)
 288{
 289	ktime_t start;
 290	ktime_t end;
 291	unsigned int timeout = 110;
 292
 293	dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
 294		 host_mode ? "host" : "device");
 295
 296	start = ktime_get();
 297
 298	while (1) {
 299		s64 ms;
 300
 301		if (dwc2_is_host_mode(hsotg) == host_mode) {
 302			dev_vdbg(hsotg->dev, "%s mode set\n",
 303				 host_mode ? "Host" : "Device");
 304			break;
 305		}
 306
 307		end = ktime_get();
 308		ms = ktime_to_ms(ktime_sub(end, start));
 309
 310		if (ms >= (s64)timeout) {
 311			dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
 312				 __func__, host_mode ? "host" : "device");
 313			break;
 314		}
 315
 316		usleep_range(1000, 2000);
 317	}
 318}
 319
 320/**
 321 * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
 322 * filter is enabled.
 323 *
 324 * @hsotg: Programming view of DWC_otg controller
 325 */
 326static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
 327{
 328	u32 gsnpsid;
 329	u32 ghwcfg4;
 330
 331	if (!dwc2_hw_is_otg(hsotg))
 332		return false;
 333
 334	/* Check if core configuration includes the IDDIG filter. */
 335	ghwcfg4 = dwc2_readl(hsotg, GHWCFG4);
 336	if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
 337		return false;
 338
 339	/*
 340	 * Check if the IDDIG debounce filter is bypassed. Available
 341	 * in core version >= 3.10a.
 342	 */
 343	gsnpsid = dwc2_readl(hsotg, GSNPSID);
 344	if (gsnpsid >= DWC2_CORE_REV_3_10a) {
 345		u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
 346
 347		if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
 348			return false;
 349	}
 350
 351	return true;
 352}
 353
 354/*
 355 * dwc2_enter_hibernation() - Common function to enter hibernation.
 356 *
 357 * @hsotg: Programming view of the DWC_otg controller
 358 * @is_host: True if core is in host mode.
 359 *
 360 * Return: 0 if successful, negative error code otherwise
 361 */
 362int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host)
 363{
 
 
 
 364	if (is_host)
 365		return dwc2_host_enter_hibernation(hsotg);
 366	else
 367		return dwc2_gadget_enter_hibernation(hsotg);
 368}
 369
 370/*
 371 * dwc2_exit_hibernation() - Common function to exit from hibernation.
 372 *
 373 * @hsotg: Programming view of the DWC_otg controller
 374 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
 375 * @reset: Enabled in case of restore with reset.
 376 * @is_host: True if core is in host mode.
 377 *
 378 * Return: 0 if successful, negative error code otherwise
 379 */
 380int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
 381			  int reset, int is_host)
 382{
 383	if (is_host)
 384		return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset);
 385	else
 386		return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset);
 387}
 388
 389/*
 390 * Do core a soft reset of the core.  Be careful with this because it
 391 * resets all the internal state machines of the core.
 392 */
 393int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
 394{
 395	u32 greset;
 396	bool wait_for_host_mode = false;
 397
 398	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 399
 400	/*
 401	 * If the current mode is host, either due to the force mode
 402	 * bit being set (which persists after core reset) or the
 403	 * connector id pin, a core soft reset will temporarily reset
 404	 * the mode to device. A delay from the IDDIG debounce filter
 405	 * will occur before going back to host mode.
 406	 *
 407	 * Determine whether we will go back into host mode after a
 408	 * reset and account for this delay after the reset.
 409	 */
 410	if (dwc2_iddig_filter_enabled(hsotg)) {
 411		u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
 412		u32 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
 413
 414		if (!(gotgctl & GOTGCTL_CONID_B) ||
 415		    (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
 416			wait_for_host_mode = true;
 417		}
 418	}
 419
 420	/* Core Soft Reset */
 421	greset = dwc2_readl(hsotg, GRSTCTL);
 422	greset |= GRSTCTL_CSFTRST;
 423	dwc2_writel(hsotg, greset, GRSTCTL);
 424
 425	if ((hsotg->hw_params.snpsid & DWC2_CORE_REV_MASK) <
 426		(DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) {
 427		if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL,
 428					      GRSTCTL_CSFTRST, 10000)) {
 429			dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST\n",
 430				 __func__);
 431			return -EBUSY;
 432		}
 433	} else {
 434		if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL,
 435					    GRSTCTL_CSFTRST_DONE, 10000)) {
 436			dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST_DONE\n",
 437				 __func__);
 438			return -EBUSY;
 439		}
 440		greset = dwc2_readl(hsotg, GRSTCTL);
 441		greset &= ~GRSTCTL_CSFTRST;
 442		greset |= GRSTCTL_CSFTRST_DONE;
 443		dwc2_writel(hsotg, greset, GRSTCTL);
 444	}
 445
 446	/*
 447	 * Switching from device mode to host mode by disconnecting
 448	 * device cable core enters and exits form hibernation.
 449	 * However, the fifo map remains not cleared. It results
 450	 * to a WARNING (WARNING: CPU: 5 PID: 0 at drivers/usb/dwc2/
 451	 * gadget.c:307 dwc2_hsotg_init_fifo+0x12/0x152 [dwc2])
 452	 * if in host mode we disconnect the micro a to b host
 453	 * cable. Because core reset occurs.
 454	 * To avoid the WARNING, fifo_map should be cleared
 455	 * in dwc2_core_reset() function by taking into account configs.
 456	 * fifo_map must be cleared only if driver is configured in
 457	 * "CONFIG_USB_DWC2_PERIPHERAL" or "CONFIG_USB_DWC2_DUAL_ROLE"
 458	 * mode.
 459	 */
 460	dwc2_clear_fifo_map(hsotg);
 461
 462	/* Wait for AHB master IDLE state */
 463	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
 464		dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
 465			 __func__);
 466		return -EBUSY;
 467	}
 468
 469	if (wait_for_host_mode && !skip_wait)
 470		dwc2_wait_for_mode(hsotg, true);
 471
 472	return 0;
 473}
 474
 475/**
 476 * dwc2_force_mode() - Force the mode of the controller.
 477 *
 478 * Forcing the mode is needed for two cases:
 479 *
 480 * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
 481 * controller to stay in a particular mode regardless of ID pin
 482 * changes. We do this once during probe.
 483 *
 484 * 2) During probe we want to read reset values of the hw
 485 * configuration registers that are only available in either host or
 486 * device mode. We may need to force the mode if the current mode does
 487 * not allow us to access the register in the mode that we want.
 488 *
 489 * In either case it only makes sense to force the mode if the
 490 * controller hardware is OTG capable.
 491 *
 492 * Checks are done in this function to determine whether doing a force
 493 * would be valid or not.
 494 *
 495 * If a force is done, it requires a IDDIG debounce filter delay if
 496 * the filter is configured and enabled. We poll the current mode of
 497 * the controller to account for this delay.
 498 *
 499 * @hsotg: Programming view of DWC_otg controller
 500 * @host: Host mode flag
 501 */
 502void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
 503{
 504	u32 gusbcfg;
 505	u32 set;
 506	u32 clear;
 507
 508	dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
 509
 510	/*
 511	 * Force mode has no effect if the hardware is not OTG.
 512	 */
 513	if (!dwc2_hw_is_otg(hsotg))
 514		return;
 515
 516	/*
 517	 * If dr_mode is either peripheral or host only, there is no
 518	 * need to ever force the mode to the opposite mode.
 519	 */
 520	if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
 521		return;
 522
 523	if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
 524		return;
 525
 526	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
 527
 528	set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
 529	clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
 530
 531	gusbcfg &= ~clear;
 532	gusbcfg |= set;
 533	dwc2_writel(hsotg, gusbcfg, GUSBCFG);
 534
 535	dwc2_wait_for_mode(hsotg, host);
 536	return;
 537}
 538
 539/**
 540 * dwc2_clear_force_mode() - Clears the force mode bits.
 541 *
 542 * After clearing the bits, wait up to 100 ms to account for any
 543 * potential IDDIG filter delay. We can't know if we expect this delay
 544 * or not because the value of the connector ID status is affected by
 545 * the force mode. We only need to call this once during probe if
 546 * dr_mode == OTG.
 547 *
 548 * @hsotg: Programming view of DWC_otg controller
 549 */
 550static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
 551{
 552	u32 gusbcfg;
 553
 554	if (!dwc2_hw_is_otg(hsotg))
 555		return;
 556
 557	dev_dbg(hsotg->dev, "Clearing force mode bits\n");
 558
 559	gusbcfg = dwc2_readl(hsotg, GUSBCFG);
 560	gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
 561	gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
 562	dwc2_writel(hsotg, gusbcfg, GUSBCFG);
 563
 564	if (dwc2_iddig_filter_enabled(hsotg))
 565		msleep(100);
 566}
 567
 568/*
 569 * Sets or clears force mode based on the dr_mode parameter.
 570 */
 571void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
 572{
 573	switch (hsotg->dr_mode) {
 574	case USB_DR_MODE_HOST:
 575		/*
 576		 * NOTE: This is required for some rockchip soc based
 577		 * platforms on their host-only dwc2.
 578		 */
 579		if (!dwc2_hw_is_otg(hsotg))
 580			msleep(50);
 581
 582		break;
 583	case USB_DR_MODE_PERIPHERAL:
 584		dwc2_force_mode(hsotg, false);
 585		break;
 586	case USB_DR_MODE_OTG:
 587		dwc2_clear_force_mode(hsotg);
 588		break;
 589	default:
 590		dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
 591			 __func__, hsotg->dr_mode);
 592		break;
 593	}
 594}
 595
 596/*
 597 * dwc2_enable_acg - enable active clock gating feature
 598 */
 599void dwc2_enable_acg(struct dwc2_hsotg *hsotg)
 600{
 601	if (hsotg->params.acg_enable) {
 602		u32 pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
 603
 604		dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n");
 605		pcgcctl1 |= PCGCCTL1_GATEEN;
 606		dwc2_writel(hsotg, pcgcctl1, PCGCCTL1);
 607	}
 608}
 609
 610/**
 611 * dwc2_dump_host_registers() - Prints the host registers
 612 *
 613 * @hsotg: Programming view of DWC_otg controller
 614 *
 615 * NOTE: This function will be removed once the peripheral controller code
 616 * is integrated and the driver is stable
 617 */
 618void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg)
 619{
 620#ifdef DEBUG
 621	u32 __iomem *addr;
 622	int i;
 623
 624	dev_dbg(hsotg->dev, "Host Global Registers\n");
 625	addr = hsotg->regs + HCFG;
 626	dev_dbg(hsotg->dev, "HCFG	 @0x%08lX : 0x%08X\n",
 627		(unsigned long)addr, dwc2_readl(hsotg, HCFG));
 628	addr = hsotg->regs + HFIR;
 629	dev_dbg(hsotg->dev, "HFIR	 @0x%08lX : 0x%08X\n",
 630		(unsigned long)addr, dwc2_readl(hsotg, HFIR));
 631	addr = hsotg->regs + HFNUM;
 632	dev_dbg(hsotg->dev, "HFNUM	 @0x%08lX : 0x%08X\n",
 633		(unsigned long)addr, dwc2_readl(hsotg, HFNUM));
 634	addr = hsotg->regs + HPTXSTS;
 635	dev_dbg(hsotg->dev, "HPTXSTS	 @0x%08lX : 0x%08X\n",
 636		(unsigned long)addr, dwc2_readl(hsotg, HPTXSTS));
 637	addr = hsotg->regs + HAINT;
 638	dev_dbg(hsotg->dev, "HAINT	 @0x%08lX : 0x%08X\n",
 639		(unsigned long)addr, dwc2_readl(hsotg, HAINT));
 640	addr = hsotg->regs + HAINTMSK;
 641	dev_dbg(hsotg->dev, "HAINTMSK	 @0x%08lX : 0x%08X\n",
 642		(unsigned long)addr, dwc2_readl(hsotg, HAINTMSK));
 643	if (hsotg->params.dma_desc_enable) {
 644		addr = hsotg->regs + HFLBADDR;
 645		dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
 646			(unsigned long)addr, dwc2_readl(hsotg, HFLBADDR));
 647	}
 648
 649	addr = hsotg->regs + HPRT0;
 650	dev_dbg(hsotg->dev, "HPRT0	 @0x%08lX : 0x%08X\n",
 651		(unsigned long)addr, dwc2_readl(hsotg, HPRT0));
 652
 653	for (i = 0; i < hsotg->params.host_channels; i++) {
 654		dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
 655		addr = hsotg->regs + HCCHAR(i);
 656		dev_dbg(hsotg->dev, "HCCHAR	 @0x%08lX : 0x%08X\n",
 657			(unsigned long)addr, dwc2_readl(hsotg, HCCHAR(i)));
 658		addr = hsotg->regs + HCSPLT(i);
 659		dev_dbg(hsotg->dev, "HCSPLT	 @0x%08lX : 0x%08X\n",
 660			(unsigned long)addr, dwc2_readl(hsotg, HCSPLT(i)));
 661		addr = hsotg->regs + HCINT(i);
 662		dev_dbg(hsotg->dev, "HCINT	 @0x%08lX : 0x%08X\n",
 663			(unsigned long)addr, dwc2_readl(hsotg, HCINT(i)));
 664		addr = hsotg->regs + HCINTMSK(i);
 665		dev_dbg(hsotg->dev, "HCINTMSK	 @0x%08lX : 0x%08X\n",
 666			(unsigned long)addr, dwc2_readl(hsotg, HCINTMSK(i)));
 667		addr = hsotg->regs + HCTSIZ(i);
 668		dev_dbg(hsotg->dev, "HCTSIZ	 @0x%08lX : 0x%08X\n",
 669			(unsigned long)addr, dwc2_readl(hsotg, HCTSIZ(i)));
 670		addr = hsotg->regs + HCDMA(i);
 671		dev_dbg(hsotg->dev, "HCDMA	 @0x%08lX : 0x%08X\n",
 672			(unsigned long)addr, dwc2_readl(hsotg, HCDMA(i)));
 673		if (hsotg->params.dma_desc_enable) {
 674			addr = hsotg->regs + HCDMAB(i);
 675			dev_dbg(hsotg->dev, "HCDMAB	 @0x%08lX : 0x%08X\n",
 676				(unsigned long)addr, dwc2_readl(hsotg,
 677								HCDMAB(i)));
 678		}
 679	}
 680#endif
 681}
 682
 683/**
 684 * dwc2_dump_global_registers() - Prints the core global registers
 685 *
 686 * @hsotg: Programming view of DWC_otg controller
 687 *
 688 * NOTE: This function will be removed once the peripheral controller code
 689 * is integrated and the driver is stable
 690 */
 691void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg)
 692{
 693#ifdef DEBUG
 694	u32 __iomem *addr;
 695
 696	dev_dbg(hsotg->dev, "Core Global Registers\n");
 697	addr = hsotg->regs + GOTGCTL;
 698	dev_dbg(hsotg->dev, "GOTGCTL	 @0x%08lX : 0x%08X\n",
 699		(unsigned long)addr, dwc2_readl(hsotg, GOTGCTL));
 700	addr = hsotg->regs + GOTGINT;
 701	dev_dbg(hsotg->dev, "GOTGINT	 @0x%08lX : 0x%08X\n",
 702		(unsigned long)addr, dwc2_readl(hsotg, GOTGINT));
 703	addr = hsotg->regs + GAHBCFG;
 704	dev_dbg(hsotg->dev, "GAHBCFG	 @0x%08lX : 0x%08X\n",
 705		(unsigned long)addr, dwc2_readl(hsotg, GAHBCFG));
 706	addr = hsotg->regs + GUSBCFG;
 707	dev_dbg(hsotg->dev, "GUSBCFG	 @0x%08lX : 0x%08X\n",
 708		(unsigned long)addr, dwc2_readl(hsotg, GUSBCFG));
 709	addr = hsotg->regs + GRSTCTL;
 710	dev_dbg(hsotg->dev, "GRSTCTL	 @0x%08lX : 0x%08X\n",
 711		(unsigned long)addr, dwc2_readl(hsotg, GRSTCTL));
 712	addr = hsotg->regs + GINTSTS;
 713	dev_dbg(hsotg->dev, "GINTSTS	 @0x%08lX : 0x%08X\n",
 714		(unsigned long)addr, dwc2_readl(hsotg, GINTSTS));
 715	addr = hsotg->regs + GINTMSK;
 716	dev_dbg(hsotg->dev, "GINTMSK	 @0x%08lX : 0x%08X\n",
 717		(unsigned long)addr, dwc2_readl(hsotg, GINTMSK));
 718	addr = hsotg->regs + GRXSTSR;
 719	dev_dbg(hsotg->dev, "GRXSTSR	 @0x%08lX : 0x%08X\n",
 720		(unsigned long)addr, dwc2_readl(hsotg, GRXSTSR));
 721	addr = hsotg->regs + GRXFSIZ;
 722	dev_dbg(hsotg->dev, "GRXFSIZ	 @0x%08lX : 0x%08X\n",
 723		(unsigned long)addr, dwc2_readl(hsotg, GRXFSIZ));
 724	addr = hsotg->regs + GNPTXFSIZ;
 725	dev_dbg(hsotg->dev, "GNPTXFSIZ	 @0x%08lX : 0x%08X\n",
 726		(unsigned long)addr, dwc2_readl(hsotg, GNPTXFSIZ));
 727	addr = hsotg->regs + GNPTXSTS;
 728	dev_dbg(hsotg->dev, "GNPTXSTS	 @0x%08lX : 0x%08X\n",
 729		(unsigned long)addr, dwc2_readl(hsotg, GNPTXSTS));
 730	addr = hsotg->regs + GI2CCTL;
 731	dev_dbg(hsotg->dev, "GI2CCTL	 @0x%08lX : 0x%08X\n",
 732		(unsigned long)addr, dwc2_readl(hsotg, GI2CCTL));
 733	addr = hsotg->regs + GPVNDCTL;
 734	dev_dbg(hsotg->dev, "GPVNDCTL	 @0x%08lX : 0x%08X\n",
 735		(unsigned long)addr, dwc2_readl(hsotg, GPVNDCTL));
 736	addr = hsotg->regs + GGPIO;
 737	dev_dbg(hsotg->dev, "GGPIO	 @0x%08lX : 0x%08X\n",
 738		(unsigned long)addr, dwc2_readl(hsotg, GGPIO));
 739	addr = hsotg->regs + GUID;
 740	dev_dbg(hsotg->dev, "GUID	 @0x%08lX : 0x%08X\n",
 741		(unsigned long)addr, dwc2_readl(hsotg, GUID));
 742	addr = hsotg->regs + GSNPSID;
 743	dev_dbg(hsotg->dev, "GSNPSID	 @0x%08lX : 0x%08X\n",
 744		(unsigned long)addr, dwc2_readl(hsotg, GSNPSID));
 745	addr = hsotg->regs + GHWCFG1;
 746	dev_dbg(hsotg->dev, "GHWCFG1	 @0x%08lX : 0x%08X\n",
 747		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG1));
 748	addr = hsotg->regs + GHWCFG2;
 749	dev_dbg(hsotg->dev, "GHWCFG2	 @0x%08lX : 0x%08X\n",
 750		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG2));
 751	addr = hsotg->regs + GHWCFG3;
 752	dev_dbg(hsotg->dev, "GHWCFG3	 @0x%08lX : 0x%08X\n",
 753		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG3));
 754	addr = hsotg->regs + GHWCFG4;
 755	dev_dbg(hsotg->dev, "GHWCFG4	 @0x%08lX : 0x%08X\n",
 756		(unsigned long)addr, dwc2_readl(hsotg, GHWCFG4));
 757	addr = hsotg->regs + GLPMCFG;
 758	dev_dbg(hsotg->dev, "GLPMCFG	 @0x%08lX : 0x%08X\n",
 759		(unsigned long)addr, dwc2_readl(hsotg, GLPMCFG));
 760	addr = hsotg->regs + GPWRDN;
 761	dev_dbg(hsotg->dev, "GPWRDN	 @0x%08lX : 0x%08X\n",
 762		(unsigned long)addr, dwc2_readl(hsotg, GPWRDN));
 763	addr = hsotg->regs + GDFIFOCFG;
 764	dev_dbg(hsotg->dev, "GDFIFOCFG	 @0x%08lX : 0x%08X\n",
 765		(unsigned long)addr, dwc2_readl(hsotg, GDFIFOCFG));
 766	addr = hsotg->regs + HPTXFSIZ;
 767	dev_dbg(hsotg->dev, "HPTXFSIZ	 @0x%08lX : 0x%08X\n",
 768		(unsigned long)addr, dwc2_readl(hsotg, HPTXFSIZ));
 769
 770	addr = hsotg->regs + PCGCTL;
 771	dev_dbg(hsotg->dev, "PCGCTL	 @0x%08lX : 0x%08X\n",
 772		(unsigned long)addr, dwc2_readl(hsotg, PCGCTL));
 773#endif
 774}
 775
 776/**
 777 * dwc2_flush_tx_fifo() - Flushes a Tx FIFO
 778 *
 779 * @hsotg: Programming view of DWC_otg controller
 780 * @num:   Tx FIFO to flush
 781 */
 782void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num)
 783{
 784	u32 greset;
 785
 786	dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num);
 787
 788	/* Wait for AHB master IDLE state */
 789	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
 790		dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
 791			 __func__);
 792
 793	greset = GRSTCTL_TXFFLSH;
 794	greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
 795	dwc2_writel(hsotg, greset, GRSTCTL);
 796
 797	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000))
 798		dev_warn(hsotg->dev, "%s:  HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n",
 799			 __func__);
 800
 801	/* Wait for at least 3 PHY Clocks */
 802	udelay(1);
 803}
 804
 805/**
 806 * dwc2_flush_rx_fifo() - Flushes the Rx FIFO
 807 *
 808 * @hsotg: Programming view of DWC_otg controller
 809 */
 810void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
 811{
 812	u32 greset;
 813
 814	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 815
 816	/* Wait for AHB master IDLE state */
 817	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
 818		dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
 819			 __func__);
 820
 821	greset = GRSTCTL_RXFFLSH;
 822	dwc2_writel(hsotg, greset, GRSTCTL);
 823
 824	/* Wait for RxFIFO flush done */
 825	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000))
 826		dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n",
 827			 __func__);
 828
 829	/* Wait for at least 3 PHY Clocks */
 830	udelay(1);
 831}
 832
 833bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
 834{
 835	if (dwc2_readl(hsotg, GSNPSID) == 0xffffffff)
 836		return false;
 837	else
 838		return true;
 839}
 840
 841/**
 842 * dwc2_enable_global_interrupts() - Enables the controller's Global
 843 * Interrupt in the AHB Config register
 844 *
 845 * @hsotg: Programming view of DWC_otg controller
 846 */
 847void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
 848{
 849	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
 850
 851	ahbcfg |= GAHBCFG_GLBL_INTR_EN;
 852	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
 853}
 854
 855/**
 856 * dwc2_disable_global_interrupts() - Disables the controller's Global
 857 * Interrupt in the AHB Config register
 858 *
 859 * @hsotg: Programming view of DWC_otg controller
 860 */
 861void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
 862{
 863	u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
 864
 865	ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
 866	dwc2_writel(hsotg, ahbcfg, GAHBCFG);
 867}
 868
 869/* Returns the controller's GHWCFG2.OTG_MODE. */
 870unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg)
 871{
 872	u32 ghwcfg2 = dwc2_readl(hsotg, GHWCFG2);
 873
 874	return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
 875		GHWCFG2_OP_MODE_SHIFT;
 876}
 877
 878/* Returns true if the controller is capable of DRD. */
 879bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
 880{
 881	unsigned int op_mode = dwc2_op_mode(hsotg);
 882
 883	return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
 884		(op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
 885		(op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
 886}
 887
 888/* Returns true if the controller is host-only. */
 889bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
 890{
 891	unsigned int op_mode = dwc2_op_mode(hsotg);
 892
 893	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
 894		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
 895}
 896
 897/* Returns true if the controller is device-only. */
 898bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
 899{
 900	unsigned int op_mode = dwc2_op_mode(hsotg);
 901
 902	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
 903		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
 904}
 905
 906/**
 907 * dwc2_hsotg_wait_bit_set - Waits for bit to be set.
 908 * @hsotg: Programming view of DWC_otg controller.
 909 * @offset: Register's offset where bit/bits must be set.
 910 * @mask: Mask of the bit/bits which must be set.
 911 * @timeout: Timeout to wait.
 912 *
 913 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
 914 */
 915int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
 916			    u32 timeout)
 917{
 918	u32 i;
 919
 920	for (i = 0; i < timeout; i++) {
 921		if (dwc2_readl(hsotg, offset) & mask)
 922			return 0;
 923		udelay(1);
 924	}
 925
 926	return -ETIMEDOUT;
 927}
 928
 929/**
 930 * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear.
 931 * @hsotg: Programming view of DWC_otg controller.
 932 * @offset: Register's offset where bit/bits must be set.
 933 * @mask: Mask of the bit/bits which must be set.
 934 * @timeout: Timeout to wait.
 935 *
 936 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
 937 */
 938int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
 939			      u32 timeout)
 940{
 941	u32 i;
 942
 943	for (i = 0; i < timeout; i++) {
 944		if (!(dwc2_readl(hsotg, offset) & mask))
 945			return 0;
 946		udelay(1);
 947	}
 948
 949	return -ETIMEDOUT;
 950}
 951
 952/*
 953 * Initializes the FSLSPClkSel field of the HCFG register depending on the
 954 * PHY type
 955 */
 956void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
 957{
 958	u32 hcfg, val;
 959
 960	if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
 961	     hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
 962	     hsotg->params.ulpi_fs_ls) ||
 963	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
 964		/* Full speed PHY */
 965		val = HCFG_FSLSPCLKSEL_48_MHZ;
 966	} else {
 967		/* High speed PHY running at full speed or high speed */
 968		val = HCFG_FSLSPCLKSEL_30_60_MHZ;
 969	}
 970
 971	dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
 972	hcfg = dwc2_readl(hsotg, HCFG);
 973	hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
 974	hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
 975	dwc2_writel(hsotg, hcfg, HCFG);
 976}
 977
 978static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 979{
 980	u32 usbcfg, ggpio, i2cctl;
 981	int retval = 0;
 982
 983	/*
 984	 * core_init() is now called on every switch so only call the
 985	 * following for the first time through
 986	 */
 987	if (select_phy) {
 988		dev_dbg(hsotg->dev, "FS PHY selected\n");
 989
 990		usbcfg = dwc2_readl(hsotg, GUSBCFG);
 991		if (!(usbcfg & GUSBCFG_PHYSEL)) {
 992			usbcfg |= GUSBCFG_PHYSEL;
 993			dwc2_writel(hsotg, usbcfg, GUSBCFG);
 994
 995			/* Reset after a PHY select */
 996			retval = dwc2_core_reset(hsotg, false);
 997
 998			if (retval) {
 999				dev_err(hsotg->dev,
1000					"%s: Reset failed, aborting", __func__);
1001				return retval;
1002			}
1003		}
1004
1005		if (hsotg->params.activate_stm_fs_transceiver) {
1006			ggpio = dwc2_readl(hsotg, GGPIO);
1007			if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
1008				dev_dbg(hsotg->dev, "Activating transceiver\n");
1009				/*
1010				 * STM32F4x9 uses the GGPIO register as general
1011				 * core configuration register.
1012				 */
1013				ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
1014				dwc2_writel(hsotg, ggpio, GGPIO);
1015			}
1016		}
1017	}
1018
1019	/*
1020	 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
1021	 * do this on HNP Dev/Host mode switches (done in dev_init and
1022	 * host_init).
1023	 */
1024	if (dwc2_is_host_mode(hsotg))
1025		dwc2_init_fs_ls_pclk_sel(hsotg);
1026
1027	if (hsotg->params.i2c_enable) {
1028		dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
1029
1030		/* Program GUSBCFG.OtgUtmiFsSel to I2C */
1031		usbcfg = dwc2_readl(hsotg, GUSBCFG);
1032		usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
1033		dwc2_writel(hsotg, usbcfg, GUSBCFG);
1034
1035		/* Program GI2CCTL.I2CEn */
1036		i2cctl = dwc2_readl(hsotg, GI2CCTL);
1037		i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
1038		i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
1039		i2cctl &= ~GI2CCTL_I2CEN;
1040		dwc2_writel(hsotg, i2cctl, GI2CCTL);
1041		i2cctl |= GI2CCTL_I2CEN;
1042		dwc2_writel(hsotg, i2cctl, GI2CCTL);
1043	}
1044
1045	return retval;
1046}
1047
1048static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1049{
1050	u32 usbcfg, usbcfg_old;
1051	int retval = 0;
1052
1053	if (!select_phy)
1054		return 0;
1055
1056	usbcfg = dwc2_readl(hsotg, GUSBCFG);
1057	usbcfg_old = usbcfg;
1058
1059	/*
1060	 * HS PHY parameters. These parameters are preserved during soft reset
1061	 * so only program the first time. Do a soft reset immediately after
1062	 * setting phyif.
1063	 */
1064	switch (hsotg->params.phy_type) {
1065	case DWC2_PHY_TYPE_PARAM_ULPI:
1066		/* ULPI interface */
1067		dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
1068		usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
1069		usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
1070		if (hsotg->params.phy_ulpi_ddr)
1071			usbcfg |= GUSBCFG_DDRSEL;
1072
1073		/* Set external VBUS indicator as needed. */
1074		if (hsotg->params.oc_disable)
1075			usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
1076				   GUSBCFG_INDICATORPASSTHROUGH);
1077		break;
1078	case DWC2_PHY_TYPE_PARAM_UTMI:
1079		/* UTMI+ interface */
1080		dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
1081		usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
1082		if (hsotg->params.phy_utmi_width == 16)
1083			usbcfg |= GUSBCFG_PHYIF16;
1084		break;
1085	default:
1086		dev_err(hsotg->dev, "FS PHY selected at HS!\n");
1087		break;
1088	}
1089
1090	if (usbcfg != usbcfg_old) {
1091		dwc2_writel(hsotg, usbcfg, GUSBCFG);
1092
1093		/* Reset after setting the PHY parameters */
1094		retval = dwc2_core_reset(hsotg, false);
1095		if (retval) {
1096			dev_err(hsotg->dev,
1097				"%s: Reset failed, aborting", __func__);
1098			return retval;
1099		}
1100	}
1101
1102	return retval;
1103}
1104
1105static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg)
1106{
1107	u32 usbcfg;
1108
1109	if (hsotg->params.phy_type != DWC2_PHY_TYPE_PARAM_UTMI)
1110		return;
1111
1112	usbcfg = dwc2_readl(hsotg, GUSBCFG);
1113
1114	usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
1115	if (hsotg->params.phy_utmi_width == 16)
1116		usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
1117	else
1118		usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
1119
1120	dwc2_writel(hsotg, usbcfg, GUSBCFG);
1121}
1122
1123int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1124{
1125	u32 usbcfg;
1126	u32 otgctl;
1127	int retval = 0;
1128
1129	if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
1130	     hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
1131	    hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
1132		/* If FS/LS mode with FS/LS PHY */
1133		retval = dwc2_fs_phy_init(hsotg, select_phy);
1134		if (retval)
1135			return retval;
1136	} else {
1137		/* High speed PHY */
1138		retval = dwc2_hs_phy_init(hsotg, select_phy);
1139		if (retval)
1140			return retval;
1141
1142		if (dwc2_is_device_mode(hsotg))
1143			dwc2_set_turnaround_time(hsotg);
1144	}
1145
1146	if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
1147	    hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
1148	    hsotg->params.ulpi_fs_ls) {
1149		dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
1150		usbcfg = dwc2_readl(hsotg, GUSBCFG);
1151		usbcfg |= GUSBCFG_ULPI_FS_LS;
1152		usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
1153		dwc2_writel(hsotg, usbcfg, GUSBCFG);
1154	} else {
1155		usbcfg = dwc2_readl(hsotg, GUSBCFG);
1156		usbcfg &= ~GUSBCFG_ULPI_FS_LS;
1157		usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
1158		dwc2_writel(hsotg, usbcfg, GUSBCFG);
1159	}
1160
1161	if (!hsotg->params.activate_ingenic_overcurrent_detection) {
1162		if (dwc2_is_host_mode(hsotg)) {
1163			otgctl = readl(hsotg->regs + GOTGCTL);
1164			otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL;
1165			writel(otgctl, hsotg->regs + GOTGCTL);
1166		}
1167	}
1168
1169	return retval;
1170}
1171
1172MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
1173MODULE_AUTHOR("Synopsys, Inc.");
1174MODULE_LICENSE("Dual BSD/GPL");
v4.17
   1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2/*
   3 * core.c - DesignWare HS OTG Controller common routines
   4 *
   5 * Copyright (C) 2004-2013 Synopsys, Inc.
   6 *
   7 * Redistribution and use in source and binary forms, with or without
   8 * modification, are permitted provided that the following conditions
   9 * are met:
  10 * 1. Redistributions of source code must retain the above copyright
  11 *    notice, this list of conditions, and the following disclaimer,
  12 *    without modification.
  13 * 2. Redistributions in binary form must reproduce the above copyright
  14 *    notice, this list of conditions and the following disclaimer in the
  15 *    documentation and/or other materials provided with the distribution.
  16 * 3. The names of the above-listed copyright holders may not be used
  17 *    to endorse or promote products derived from this software without
  18 *    specific prior written permission.
  19 *
  20 * ALTERNATIVELY, this software may be distributed under the terms of the
  21 * GNU General Public License ("GPL") as published by the Free Software
  22 * Foundation; either version 2 of the License, or (at your option) any
  23 * later version.
  24 *
  25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
  26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  36 */
  37
  38/*
  39 * The Core code provides basic services for accessing and managing the
  40 * DWC_otg hardware. These services are used by both the Host Controller
  41 * Driver and the Peripheral Controller Driver.
  42 */
  43#include <linux/kernel.h>
  44#include <linux/module.h>
  45#include <linux/moduleparam.h>
  46#include <linux/spinlock.h>
  47#include <linux/interrupt.h>
  48#include <linux/dma-mapping.h>
  49#include <linux/delay.h>
  50#include <linux/io.h>
  51#include <linux/slab.h>
  52#include <linux/usb.h>
  53
  54#include <linux/usb/hcd.h>
  55#include <linux/usb/ch11.h>
  56
  57#include "core.h"
  58#include "hcd.h"
  59
  60/**
  61 * dwc2_backup_global_registers() - Backup global controller registers.
  62 * When suspending usb bus, registers needs to be backuped
  63 * if controller power is disabled once suspended.
  64 *
  65 * @hsotg: Programming view of the DWC_otg controller
  66 */
  67int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
  68{
  69	struct dwc2_gregs_backup *gr;
  70
  71	dev_dbg(hsotg->dev, "%s\n", __func__);
  72
  73	/* Backup global regs */
  74	gr = &hsotg->gr_backup;
  75
  76	gr->gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
  77	gr->gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
  78	gr->gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
  79	gr->gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
  80	gr->grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);
  81	gr->gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
  82	gr->gdfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG);
  83	gr->pcgcctl1 = dwc2_readl(hsotg->regs + PCGCCTL1);
  84	gr->glpmcfg = dwc2_readl(hsotg->regs + GLPMCFG);
  85	gr->gi2cctl = dwc2_readl(hsotg->regs + GI2CCTL);
  86	gr->pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
  87
  88	gr->valid = true;
  89	return 0;
  90}
  91
  92/**
  93 * dwc2_restore_global_registers() - Restore controller global registers.
  94 * When resuming usb bus, device registers needs to be restored
  95 * if controller power were disabled.
  96 *
  97 * @hsotg: Programming view of the DWC_otg controller
  98 */
  99int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg)
 100{
 101	struct dwc2_gregs_backup *gr;
 102
 103	dev_dbg(hsotg->dev, "%s\n", __func__);
 104
 105	/* Restore global regs */
 106	gr = &hsotg->gr_backup;
 107	if (!gr->valid) {
 108		dev_err(hsotg->dev, "%s: no global registers to restore\n",
 109			__func__);
 110		return -EINVAL;
 111	}
 112	gr->valid = false;
 113
 114	dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
 115	dwc2_writel(gr->gotgctl, hsotg->regs + GOTGCTL);
 116	dwc2_writel(gr->gintmsk, hsotg->regs + GINTMSK);
 117	dwc2_writel(gr->gusbcfg, hsotg->regs + GUSBCFG);
 118	dwc2_writel(gr->gahbcfg, hsotg->regs + GAHBCFG);
 119	dwc2_writel(gr->grxfsiz, hsotg->regs + GRXFSIZ);
 120	dwc2_writel(gr->gnptxfsiz, hsotg->regs + GNPTXFSIZ);
 121	dwc2_writel(gr->gdfifocfg, hsotg->regs + GDFIFOCFG);
 122	dwc2_writel(gr->pcgcctl1, hsotg->regs + PCGCCTL1);
 123	dwc2_writel(gr->glpmcfg, hsotg->regs + GLPMCFG);
 124	dwc2_writel(gr->pcgcctl, hsotg->regs + PCGCTL);
 125	dwc2_writel(gr->gi2cctl, hsotg->regs + GI2CCTL);
 126
 127	return 0;
 128}
 129
 130/**
 131 * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down.
 132 *
 133 * @hsotg: Programming view of the DWC_otg controller
 
 134 * @restore: Controller registers need to be restored
 135 */
 136int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, bool restore)
 
 137{
 138	u32 pcgcctl;
 139	int ret = 0;
 140
 141	if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL)
 142		return -ENOTSUPP;
 143
 144	pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
 145	pcgcctl &= ~PCGCTL_STOPPCLK;
 146	dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 147
 148	pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
 149	pcgcctl &= ~PCGCTL_PWRCLMP;
 150	dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 151
 152	pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
 153	pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
 154	dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 155
 156	udelay(100);
 157	if (restore) {
 158		ret = dwc2_restore_global_registers(hsotg);
 159		if (ret) {
 160			dev_err(hsotg->dev, "%s: failed to restore registers\n",
 161				__func__);
 162			return ret;
 163		}
 164		if (dwc2_is_host_mode(hsotg)) {
 165			ret = dwc2_restore_host_registers(hsotg);
 166			if (ret) {
 167				dev_err(hsotg->dev, "%s: failed to restore host registers\n",
 168					__func__);
 169				return ret;
 170			}
 171		} else {
 172			ret = dwc2_restore_device_registers(hsotg, 0);
 173			if (ret) {
 174				dev_err(hsotg->dev, "%s: failed to restore device registers\n",
 175					__func__);
 176				return ret;
 177			}
 178		}
 179	}
 180
 181	return ret;
 182}
 183
 184/**
 185 * dwc2_enter_partial_power_down() - Put controller in Partial Power Down.
 186 *
 187 * @hsotg: Programming view of the DWC_otg controller
 188 */
 189int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
 190{
 191	u32 pcgcctl;
 192	int ret = 0;
 193
 194	if (!hsotg->params.power_down)
 195		return -ENOTSUPP;
 196
 197	/* Backup all registers */
 198	ret = dwc2_backup_global_registers(hsotg);
 199	if (ret) {
 200		dev_err(hsotg->dev, "%s: failed to backup global registers\n",
 201			__func__);
 202		return ret;
 203	}
 204
 205	if (dwc2_is_host_mode(hsotg)) {
 206		ret = dwc2_backup_host_registers(hsotg);
 207		if (ret) {
 208			dev_err(hsotg->dev, "%s: failed to backup host registers\n",
 209				__func__);
 210			return ret;
 211		}
 212	} else {
 213		ret = dwc2_backup_device_registers(hsotg);
 214		if (ret) {
 215			dev_err(hsotg->dev, "%s: failed to backup device registers\n",
 216				__func__);
 217			return ret;
 218		}
 219	}
 220
 221	/*
 222	 * Clear any pending interrupts since dwc2 will not be able to
 223	 * clear them after entering partial_power_down.
 224	 */
 225	dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
 226
 227	/* Put the controller in low power state */
 228	pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
 229
 230	pcgcctl |= PCGCTL_PWRCLMP;
 231	dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 232	ndelay(20);
 233
 234	pcgcctl |= PCGCTL_RSTPDWNMODULE;
 235	dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 236	ndelay(20);
 237
 238	pcgcctl |= PCGCTL_STOPPCLK;
 239	dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 240
 241	return ret;
 242}
 243
 244/**
 245 * dwc2_restore_essential_regs() - Restore essiential regs of core.
 246 *
 247 * @hsotg: Programming view of the DWC_otg controller
 248 * @rmode: Restore mode, enabled in case of remote-wakeup.
 249 * @is_host: Host or device mode.
 250 */
 251static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode,
 252					int is_host)
 253{
 254	u32 pcgcctl;
 255	struct dwc2_gregs_backup *gr;
 256	struct dwc2_dregs_backup *dr;
 257	struct dwc2_hregs_backup *hr;
 258
 259	gr = &hsotg->gr_backup;
 260	dr = &hsotg->dr_backup;
 261	hr = &hsotg->hr_backup;
 262
 263	dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__);
 264
 265	/* Load restore values for [31:14] bits */
 266	pcgcctl = (gr->pcgcctl & 0xffffc000);
 267	/* If High Speed */
 268	if (is_host) {
 269		if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK))
 270			pcgcctl |= BIT(17);
 271	} else {
 272		if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK))
 273			pcgcctl |= BIT(17);
 274	}
 275	dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 276
 277	/* Umnask global Interrupt in GAHBCFG and restore it */
 278	dwc2_writel(gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, hsotg->regs + GAHBCFG);
 279
 280	/* Clear all pending interupts */
 281	dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
 282
 283	/* Unmask restore done interrupt */
 284	dwc2_writel(GINTSTS_RESTOREDONE, hsotg->regs + GINTMSK);
 285
 286	/* Restore GUSBCFG and HCFG/DCFG */
 287	dwc2_writel(gr->gusbcfg, hsotg->regs + GUSBCFG);
 288
 289	if (is_host) {
 290		dwc2_writel(hr->hcfg, hsotg->regs + HCFG);
 291		if (rmode)
 292			pcgcctl |= PCGCTL_RESTOREMODE;
 293		dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 294		udelay(10);
 295
 296		pcgcctl |= PCGCTL_ESS_REG_RESTORED;
 297		dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 298		udelay(10);
 299	} else {
 300		dwc2_writel(dr->dcfg, hsotg->regs + DCFG);
 301		if (!rmode)
 302			pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE;
 303		dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 304		udelay(10);
 305
 306		pcgcctl |= PCGCTL_ESS_REG_RESTORED;
 307		dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 308		udelay(10);
 309	}
 310}
 311
 312/**
 313 * dwc2_hib_restore_common() - Common part of restore routine.
 314 *
 315 * @hsotg: Programming view of the DWC_otg controller
 316 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
 317 * @is_host: Host or device mode.
 318 */
 319void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
 320			     int is_host)
 321{
 322	u32 gpwrdn;
 323
 324	/* Switch-on voltage to the core */
 325	gpwrdn = dwc2_readl(hsotg->regs + GPWRDN);
 326	gpwrdn &= ~GPWRDN_PWRDNSWTCH;
 327	dwc2_writel(gpwrdn, hsotg->regs + GPWRDN);
 328	udelay(10);
 329
 330	/* Reset core */
 331	gpwrdn = dwc2_readl(hsotg->regs + GPWRDN);
 332	gpwrdn &= ~GPWRDN_PWRDNRSTN;
 333	dwc2_writel(gpwrdn, hsotg->regs + GPWRDN);
 334	udelay(10);
 335
 336	/* Enable restore from PMU */
 337	gpwrdn = dwc2_readl(hsotg->regs + GPWRDN);
 338	gpwrdn |= GPWRDN_RESTORE;
 339	dwc2_writel(gpwrdn, hsotg->regs + GPWRDN);
 340	udelay(10);
 341
 342	/* Disable Power Down Clamp */
 343	gpwrdn = dwc2_readl(hsotg->regs + GPWRDN);
 344	gpwrdn &= ~GPWRDN_PWRDNCLMP;
 345	dwc2_writel(gpwrdn, hsotg->regs + GPWRDN);
 346	udelay(50);
 347
 348	if (!is_host && rem_wakeup)
 349		udelay(70);
 350
 351	/* Deassert reset core */
 352	gpwrdn = dwc2_readl(hsotg->regs + GPWRDN);
 353	gpwrdn |= GPWRDN_PWRDNRSTN;
 354	dwc2_writel(gpwrdn, hsotg->regs + GPWRDN);
 355	udelay(10);
 356
 357	/* Disable PMU interrupt */
 358	gpwrdn = dwc2_readl(hsotg->regs + GPWRDN);
 359	gpwrdn &= ~GPWRDN_PMUINTSEL;
 360	dwc2_writel(gpwrdn, hsotg->regs + GPWRDN);
 361	udelay(10);
 362
 363	/* Set Restore Essential Regs bit in PCGCCTL register */
 364	dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host);
 365
 366	/*
 367	 * Wait For Restore_done Interrupt. This mechanism of polling the
 368	 * interrupt is introduced to avoid any possible race conditions
 369	 */
 370	if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE,
 371				    20000)) {
 372		dev_dbg(hsotg->dev,
 373			"%s: Restore Done wan't generated here\n",
 374			__func__);
 375	} else {
 376		dev_dbg(hsotg->dev, "restore done  generated here\n");
 
 
 
 
 
 
 377	}
 378}
 379
 380/**
 381 * dwc2_wait_for_mode() - Waits for the controller mode.
 382 * @hsotg:	Programming view of the DWC_otg controller.
 383 * @host_mode:	If true, waits for host mode, otherwise device mode.
 384 */
 385static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
 386			       bool host_mode)
 387{
 388	ktime_t start;
 389	ktime_t end;
 390	unsigned int timeout = 110;
 391
 392	dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
 393		 host_mode ? "host" : "device");
 394
 395	start = ktime_get();
 396
 397	while (1) {
 398		s64 ms;
 399
 400		if (dwc2_is_host_mode(hsotg) == host_mode) {
 401			dev_vdbg(hsotg->dev, "%s mode set\n",
 402				 host_mode ? "Host" : "Device");
 403			break;
 404		}
 405
 406		end = ktime_get();
 407		ms = ktime_to_ms(ktime_sub(end, start));
 408
 409		if (ms >= (s64)timeout) {
 410			dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
 411				 __func__, host_mode ? "host" : "device");
 412			break;
 413		}
 414
 415		usleep_range(1000, 2000);
 416	}
 417}
 418
 419/**
 420 * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
 421 * filter is enabled.
 
 
 422 */
 423static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
 424{
 425	u32 gsnpsid;
 426	u32 ghwcfg4;
 427
 428	if (!dwc2_hw_is_otg(hsotg))
 429		return false;
 430
 431	/* Check if core configuration includes the IDDIG filter. */
 432	ghwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4);
 433	if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
 434		return false;
 435
 436	/*
 437	 * Check if the IDDIG debounce filter is bypassed. Available
 438	 * in core version >= 3.10a.
 439	 */
 440	gsnpsid = dwc2_readl(hsotg->regs + GSNPSID);
 441	if (gsnpsid >= DWC2_CORE_REV_3_10a) {
 442		u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 443
 444		if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
 445			return false;
 446	}
 447
 448	return true;
 449}
 450
 451/*
 452 * dwc2_enter_hibernation() - Common function to enter hibernation.
 453 *
 454 * @hsotg: Programming view of the DWC_otg controller
 455 * @is_host: True if core is in host mode.
 456 *
 457 * Return: 0 if successful, negative error code otherwise
 458 */
 459int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host)
 460{
 461	if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_HIBERNATION)
 462		return -ENOTSUPP;
 463
 464	if (is_host)
 465		return dwc2_host_enter_hibernation(hsotg);
 466	else
 467		return dwc2_gadget_enter_hibernation(hsotg);
 468}
 469
 470/*
 471 * dwc2_exit_hibernation() - Common function to exit from hibernation.
 472 *
 473 * @hsotg: Programming view of the DWC_otg controller
 474 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
 475 * @reset: Enabled in case of restore with reset.
 476 * @is_host: True if core is in host mode.
 477 *
 478 * Return: 0 if successful, negative error code otherwise
 479 */
 480int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
 481			  int reset, int is_host)
 482{
 483	if (is_host)
 484		return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset);
 485	else
 486		return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset);
 487}
 488
 489/*
 490 * Do core a soft reset of the core.  Be careful with this because it
 491 * resets all the internal state machines of the core.
 492 */
 493int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
 494{
 495	u32 greset;
 496	bool wait_for_host_mode = false;
 497
 498	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 499
 500	/*
 501	 * If the current mode is host, either due to the force mode
 502	 * bit being set (which persists after core reset) or the
 503	 * connector id pin, a core soft reset will temporarily reset
 504	 * the mode to device. A delay from the IDDIG debounce filter
 505	 * will occur before going back to host mode.
 506	 *
 507	 * Determine whether we will go back into host mode after a
 508	 * reset and account for this delay after the reset.
 509	 */
 510	if (dwc2_iddig_filter_enabled(hsotg)) {
 511		u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 512		u32 gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 513
 514		if (!(gotgctl & GOTGCTL_CONID_B) ||
 515		    (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
 516			wait_for_host_mode = true;
 517		}
 518	}
 519
 520	/* Core Soft Reset */
 521	greset = dwc2_readl(hsotg->regs + GRSTCTL);
 522	greset |= GRSTCTL_CSFTRST;
 523	dwc2_writel(greset, hsotg->regs + GRSTCTL);
 524
 525	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_CSFTRST, 50)) {
 526		dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST\n",
 527			 __func__);
 528		return -EBUSY;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 529	}
 530
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 531	/* Wait for AHB master IDLE state */
 532	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 50)) {
 533		dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
 534			 __func__);
 535		return -EBUSY;
 536	}
 537
 538	if (wait_for_host_mode && !skip_wait)
 539		dwc2_wait_for_mode(hsotg, true);
 540
 541	return 0;
 542}
 543
 544/**
 545 * dwc2_force_mode() - Force the mode of the controller.
 546 *
 547 * Forcing the mode is needed for two cases:
 548 *
 549 * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
 550 * controller to stay in a particular mode regardless of ID pin
 551 * changes. We do this once during probe.
 552 *
 553 * 2) During probe we want to read reset values of the hw
 554 * configuration registers that are only available in either host or
 555 * device mode. We may need to force the mode if the current mode does
 556 * not allow us to access the register in the mode that we want.
 557 *
 558 * In either case it only makes sense to force the mode if the
 559 * controller hardware is OTG capable.
 560 *
 561 * Checks are done in this function to determine whether doing a force
 562 * would be valid or not.
 563 *
 564 * If a force is done, it requires a IDDIG debounce filter delay if
 565 * the filter is configured and enabled. We poll the current mode of
 566 * the controller to account for this delay.
 
 
 
 567 */
 568void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
 569{
 570	u32 gusbcfg;
 571	u32 set;
 572	u32 clear;
 573
 574	dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
 575
 576	/*
 577	 * Force mode has no effect if the hardware is not OTG.
 578	 */
 579	if (!dwc2_hw_is_otg(hsotg))
 580		return;
 581
 582	/*
 583	 * If dr_mode is either peripheral or host only, there is no
 584	 * need to ever force the mode to the opposite mode.
 585	 */
 586	if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
 587		return;
 588
 589	if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
 590		return;
 591
 592	gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 593
 594	set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
 595	clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
 596
 597	gusbcfg &= ~clear;
 598	gusbcfg |= set;
 599	dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
 600
 601	dwc2_wait_for_mode(hsotg, host);
 602	return;
 603}
 604
 605/**
 606 * dwc2_clear_force_mode() - Clears the force mode bits.
 607 *
 608 * After clearing the bits, wait up to 100 ms to account for any
 609 * potential IDDIG filter delay. We can't know if we expect this delay
 610 * or not because the value of the connector ID status is affected by
 611 * the force mode. We only need to call this once during probe if
 612 * dr_mode == OTG.
 
 
 613 */
 614static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
 615{
 616	u32 gusbcfg;
 617
 618	if (!dwc2_hw_is_otg(hsotg))
 619		return;
 620
 621	dev_dbg(hsotg->dev, "Clearing force mode bits\n");
 622
 623	gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 624	gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
 625	gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
 626	dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
 627
 628	if (dwc2_iddig_filter_enabled(hsotg))
 629		msleep(100);
 630}
 631
 632/*
 633 * Sets or clears force mode based on the dr_mode parameter.
 634 */
 635void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
 636{
 637	switch (hsotg->dr_mode) {
 638	case USB_DR_MODE_HOST:
 639		/*
 640		 * NOTE: This is required for some rockchip soc based
 641		 * platforms on their host-only dwc2.
 642		 */
 643		if (!dwc2_hw_is_otg(hsotg))
 644			msleep(50);
 645
 646		break;
 647	case USB_DR_MODE_PERIPHERAL:
 648		dwc2_force_mode(hsotg, false);
 649		break;
 650	case USB_DR_MODE_OTG:
 651		dwc2_clear_force_mode(hsotg);
 652		break;
 653	default:
 654		dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
 655			 __func__, hsotg->dr_mode);
 656		break;
 657	}
 658}
 659
 660/*
 661 * dwc2_enable_acg - enable active clock gating feature
 662 */
 663void dwc2_enable_acg(struct dwc2_hsotg *hsotg)
 664{
 665	if (hsotg->params.acg_enable) {
 666		u32 pcgcctl1 = dwc2_readl(hsotg->regs + PCGCCTL1);
 667
 668		dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n");
 669		pcgcctl1 |= PCGCCTL1_GATEEN;
 670		dwc2_writel(pcgcctl1, hsotg->regs + PCGCCTL1);
 671	}
 672}
 673
 674/**
 675 * dwc2_dump_host_registers() - Prints the host registers
 676 *
 677 * @hsotg: Programming view of DWC_otg controller
 678 *
 679 * NOTE: This function will be removed once the peripheral controller code
 680 * is integrated and the driver is stable
 681 */
 682void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg)
 683{
 684#ifdef DEBUG
 685	u32 __iomem *addr;
 686	int i;
 687
 688	dev_dbg(hsotg->dev, "Host Global Registers\n");
 689	addr = hsotg->regs + HCFG;
 690	dev_dbg(hsotg->dev, "HCFG	 @0x%08lX : 0x%08X\n",
 691		(unsigned long)addr, dwc2_readl(addr));
 692	addr = hsotg->regs + HFIR;
 693	dev_dbg(hsotg->dev, "HFIR	 @0x%08lX : 0x%08X\n",
 694		(unsigned long)addr, dwc2_readl(addr));
 695	addr = hsotg->regs + HFNUM;
 696	dev_dbg(hsotg->dev, "HFNUM	 @0x%08lX : 0x%08X\n",
 697		(unsigned long)addr, dwc2_readl(addr));
 698	addr = hsotg->regs + HPTXSTS;
 699	dev_dbg(hsotg->dev, "HPTXSTS	 @0x%08lX : 0x%08X\n",
 700		(unsigned long)addr, dwc2_readl(addr));
 701	addr = hsotg->regs + HAINT;
 702	dev_dbg(hsotg->dev, "HAINT	 @0x%08lX : 0x%08X\n",
 703		(unsigned long)addr, dwc2_readl(addr));
 704	addr = hsotg->regs + HAINTMSK;
 705	dev_dbg(hsotg->dev, "HAINTMSK	 @0x%08lX : 0x%08X\n",
 706		(unsigned long)addr, dwc2_readl(addr));
 707	if (hsotg->params.dma_desc_enable) {
 708		addr = hsotg->regs + HFLBADDR;
 709		dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
 710			(unsigned long)addr, dwc2_readl(addr));
 711	}
 712
 713	addr = hsotg->regs + HPRT0;
 714	dev_dbg(hsotg->dev, "HPRT0	 @0x%08lX : 0x%08X\n",
 715		(unsigned long)addr, dwc2_readl(addr));
 716
 717	for (i = 0; i < hsotg->params.host_channels; i++) {
 718		dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
 719		addr = hsotg->regs + HCCHAR(i);
 720		dev_dbg(hsotg->dev, "HCCHAR	 @0x%08lX : 0x%08X\n",
 721			(unsigned long)addr, dwc2_readl(addr));
 722		addr = hsotg->regs + HCSPLT(i);
 723		dev_dbg(hsotg->dev, "HCSPLT	 @0x%08lX : 0x%08X\n",
 724			(unsigned long)addr, dwc2_readl(addr));
 725		addr = hsotg->regs + HCINT(i);
 726		dev_dbg(hsotg->dev, "HCINT	 @0x%08lX : 0x%08X\n",
 727			(unsigned long)addr, dwc2_readl(addr));
 728		addr = hsotg->regs + HCINTMSK(i);
 729		dev_dbg(hsotg->dev, "HCINTMSK	 @0x%08lX : 0x%08X\n",
 730			(unsigned long)addr, dwc2_readl(addr));
 731		addr = hsotg->regs + HCTSIZ(i);
 732		dev_dbg(hsotg->dev, "HCTSIZ	 @0x%08lX : 0x%08X\n",
 733			(unsigned long)addr, dwc2_readl(addr));
 734		addr = hsotg->regs + HCDMA(i);
 735		dev_dbg(hsotg->dev, "HCDMA	 @0x%08lX : 0x%08X\n",
 736			(unsigned long)addr, dwc2_readl(addr));
 737		if (hsotg->params.dma_desc_enable) {
 738			addr = hsotg->regs + HCDMAB(i);
 739			dev_dbg(hsotg->dev, "HCDMAB	 @0x%08lX : 0x%08X\n",
 740				(unsigned long)addr, dwc2_readl(addr));
 
 741		}
 742	}
 743#endif
 744}
 745
 746/**
 747 * dwc2_dump_global_registers() - Prints the core global registers
 748 *
 749 * @hsotg: Programming view of DWC_otg controller
 750 *
 751 * NOTE: This function will be removed once the peripheral controller code
 752 * is integrated and the driver is stable
 753 */
 754void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg)
 755{
 756#ifdef DEBUG
 757	u32 __iomem *addr;
 758
 759	dev_dbg(hsotg->dev, "Core Global Registers\n");
 760	addr = hsotg->regs + GOTGCTL;
 761	dev_dbg(hsotg->dev, "GOTGCTL	 @0x%08lX : 0x%08X\n",
 762		(unsigned long)addr, dwc2_readl(addr));
 763	addr = hsotg->regs + GOTGINT;
 764	dev_dbg(hsotg->dev, "GOTGINT	 @0x%08lX : 0x%08X\n",
 765		(unsigned long)addr, dwc2_readl(addr));
 766	addr = hsotg->regs + GAHBCFG;
 767	dev_dbg(hsotg->dev, "GAHBCFG	 @0x%08lX : 0x%08X\n",
 768		(unsigned long)addr, dwc2_readl(addr));
 769	addr = hsotg->regs + GUSBCFG;
 770	dev_dbg(hsotg->dev, "GUSBCFG	 @0x%08lX : 0x%08X\n",
 771		(unsigned long)addr, dwc2_readl(addr));
 772	addr = hsotg->regs + GRSTCTL;
 773	dev_dbg(hsotg->dev, "GRSTCTL	 @0x%08lX : 0x%08X\n",
 774		(unsigned long)addr, dwc2_readl(addr));
 775	addr = hsotg->regs + GINTSTS;
 776	dev_dbg(hsotg->dev, "GINTSTS	 @0x%08lX : 0x%08X\n",
 777		(unsigned long)addr, dwc2_readl(addr));
 778	addr = hsotg->regs + GINTMSK;
 779	dev_dbg(hsotg->dev, "GINTMSK	 @0x%08lX : 0x%08X\n",
 780		(unsigned long)addr, dwc2_readl(addr));
 781	addr = hsotg->regs + GRXSTSR;
 782	dev_dbg(hsotg->dev, "GRXSTSR	 @0x%08lX : 0x%08X\n",
 783		(unsigned long)addr, dwc2_readl(addr));
 784	addr = hsotg->regs + GRXFSIZ;
 785	dev_dbg(hsotg->dev, "GRXFSIZ	 @0x%08lX : 0x%08X\n",
 786		(unsigned long)addr, dwc2_readl(addr));
 787	addr = hsotg->regs + GNPTXFSIZ;
 788	dev_dbg(hsotg->dev, "GNPTXFSIZ	 @0x%08lX : 0x%08X\n",
 789		(unsigned long)addr, dwc2_readl(addr));
 790	addr = hsotg->regs + GNPTXSTS;
 791	dev_dbg(hsotg->dev, "GNPTXSTS	 @0x%08lX : 0x%08X\n",
 792		(unsigned long)addr, dwc2_readl(addr));
 793	addr = hsotg->regs + GI2CCTL;
 794	dev_dbg(hsotg->dev, "GI2CCTL	 @0x%08lX : 0x%08X\n",
 795		(unsigned long)addr, dwc2_readl(addr));
 796	addr = hsotg->regs + GPVNDCTL;
 797	dev_dbg(hsotg->dev, "GPVNDCTL	 @0x%08lX : 0x%08X\n",
 798		(unsigned long)addr, dwc2_readl(addr));
 799	addr = hsotg->regs + GGPIO;
 800	dev_dbg(hsotg->dev, "GGPIO	 @0x%08lX : 0x%08X\n",
 801		(unsigned long)addr, dwc2_readl(addr));
 802	addr = hsotg->regs + GUID;
 803	dev_dbg(hsotg->dev, "GUID	 @0x%08lX : 0x%08X\n",
 804		(unsigned long)addr, dwc2_readl(addr));
 805	addr = hsotg->regs + GSNPSID;
 806	dev_dbg(hsotg->dev, "GSNPSID	 @0x%08lX : 0x%08X\n",
 807		(unsigned long)addr, dwc2_readl(addr));
 808	addr = hsotg->regs + GHWCFG1;
 809	dev_dbg(hsotg->dev, "GHWCFG1	 @0x%08lX : 0x%08X\n",
 810		(unsigned long)addr, dwc2_readl(addr));
 811	addr = hsotg->regs + GHWCFG2;
 812	dev_dbg(hsotg->dev, "GHWCFG2	 @0x%08lX : 0x%08X\n",
 813		(unsigned long)addr, dwc2_readl(addr));
 814	addr = hsotg->regs + GHWCFG3;
 815	dev_dbg(hsotg->dev, "GHWCFG3	 @0x%08lX : 0x%08X\n",
 816		(unsigned long)addr, dwc2_readl(addr));
 817	addr = hsotg->regs + GHWCFG4;
 818	dev_dbg(hsotg->dev, "GHWCFG4	 @0x%08lX : 0x%08X\n",
 819		(unsigned long)addr, dwc2_readl(addr));
 820	addr = hsotg->regs + GLPMCFG;
 821	dev_dbg(hsotg->dev, "GLPMCFG	 @0x%08lX : 0x%08X\n",
 822		(unsigned long)addr, dwc2_readl(addr));
 823	addr = hsotg->regs + GPWRDN;
 824	dev_dbg(hsotg->dev, "GPWRDN	 @0x%08lX : 0x%08X\n",
 825		(unsigned long)addr, dwc2_readl(addr));
 826	addr = hsotg->regs + GDFIFOCFG;
 827	dev_dbg(hsotg->dev, "GDFIFOCFG	 @0x%08lX : 0x%08X\n",
 828		(unsigned long)addr, dwc2_readl(addr));
 829	addr = hsotg->regs + HPTXFSIZ;
 830	dev_dbg(hsotg->dev, "HPTXFSIZ	 @0x%08lX : 0x%08X\n",
 831		(unsigned long)addr, dwc2_readl(addr));
 832
 833	addr = hsotg->regs + PCGCTL;
 834	dev_dbg(hsotg->dev, "PCGCTL	 @0x%08lX : 0x%08X\n",
 835		(unsigned long)addr, dwc2_readl(addr));
 836#endif
 837}
 838
 839/**
 840 * dwc2_flush_tx_fifo() - Flushes a Tx FIFO
 841 *
 842 * @hsotg: Programming view of DWC_otg controller
 843 * @num:   Tx FIFO to flush
 844 */
 845void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num)
 846{
 847	u32 greset;
 848
 849	dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num);
 850
 851	/* Wait for AHB master IDLE state */
 852	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
 853		dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
 854			 __func__);
 855
 856	greset = GRSTCTL_TXFFLSH;
 857	greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
 858	dwc2_writel(greset, hsotg->regs + GRSTCTL);
 859
 860	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000))
 861		dev_warn(hsotg->dev, "%s:  HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n",
 862			 __func__);
 863
 864	/* Wait for at least 3 PHY Clocks */
 865	udelay(1);
 866}
 867
 868/**
 869 * dwc2_flush_rx_fifo() - Flushes the Rx FIFO
 870 *
 871 * @hsotg: Programming view of DWC_otg controller
 872 */
 873void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
 874{
 875	u32 greset;
 876
 877	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 878
 879	/* Wait for AHB master IDLE state */
 880	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
 881		dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
 882			 __func__);
 883
 884	greset = GRSTCTL_RXFFLSH;
 885	dwc2_writel(greset, hsotg->regs + GRSTCTL);
 886
 887	/* Wait for RxFIFO flush done */
 888	if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000))
 889		dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n",
 890			 __func__);
 891
 892	/* Wait for at least 3 PHY Clocks */
 893	udelay(1);
 894}
 895
 896bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
 897{
 898	if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff)
 899		return false;
 900	else
 901		return true;
 902}
 903
 904/**
 905 * dwc2_enable_global_interrupts() - Enables the controller's Global
 906 * Interrupt in the AHB Config register
 907 *
 908 * @hsotg: Programming view of DWC_otg controller
 909 */
 910void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
 911{
 912	u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
 913
 914	ahbcfg |= GAHBCFG_GLBL_INTR_EN;
 915	dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
 916}
 917
 918/**
 919 * dwc2_disable_global_interrupts() - Disables the controller's Global
 920 * Interrupt in the AHB Config register
 921 *
 922 * @hsotg: Programming view of DWC_otg controller
 923 */
 924void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
 925{
 926	u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
 927
 928	ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
 929	dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
 930}
 931
 932/* Returns the controller's GHWCFG2.OTG_MODE. */
 933unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg)
 934{
 935	u32 ghwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
 936
 937	return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
 938		GHWCFG2_OP_MODE_SHIFT;
 939}
 940
 941/* Returns true if the controller is capable of DRD. */
 942bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
 943{
 944	unsigned int op_mode = dwc2_op_mode(hsotg);
 945
 946	return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
 947		(op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
 948		(op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
 949}
 950
 951/* Returns true if the controller is host-only. */
 952bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
 953{
 954	unsigned int op_mode = dwc2_op_mode(hsotg);
 955
 956	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
 957		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
 958}
 959
 960/* Returns true if the controller is device-only. */
 961bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
 962{
 963	unsigned int op_mode = dwc2_op_mode(hsotg);
 964
 965	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
 966		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
 967}
 968
 969/**
 970 * dwc2_hsotg_wait_bit_set - Waits for bit to be set.
 971 * @hsotg: Programming view of DWC_otg controller.
 972 * @offset: Register's offset where bit/bits must be set.
 973 * @mask: Mask of the bit/bits which must be set.
 974 * @timeout: Timeout to wait.
 975 *
 976 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
 977 */
 978int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
 979			    u32 timeout)
 980{
 981	u32 i;
 982
 983	for (i = 0; i < timeout; i++) {
 984		if (dwc2_readl(hsotg->regs + offset) & mask)
 985			return 0;
 986		udelay(1);
 987	}
 988
 989	return -ETIMEDOUT;
 990}
 991
 992/**
 993 * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear.
 994 * @hsotg: Programming view of DWC_otg controller.
 995 * @offset: Register's offset where bit/bits must be set.
 996 * @mask: Mask of the bit/bits which must be set.
 997 * @timeout: Timeout to wait.
 998 *
 999 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
1000 */
1001int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
1002			      u32 timeout)
1003{
1004	u32 i;
1005
1006	for (i = 0; i < timeout; i++) {
1007		if (!(dwc2_readl(hsotg->regs + offset) & mask))
1008			return 0;
1009		udelay(1);
1010	}
1011
1012	return -ETIMEDOUT;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1013}
1014
1015MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
1016MODULE_AUTHOR("Synopsys, Inc.");
1017MODULE_LICENSE("Dual BSD/GPL");