Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * core.c - DesignWare HS OTG Controller common routines
4 *
5 * Copyright (C) 2004-2013 Synopsys, Inc.
6 */
7
8/*
9 * The Core code provides basic services for accessing and managing the
10 * DWC_otg hardware. These services are used by both the Host Controller
11 * Driver and the Peripheral Controller Driver.
12 */
13#include <linux/kernel.h>
14#include <linux/module.h>
15#include <linux/moduleparam.h>
16#include <linux/spinlock.h>
17#include <linux/interrupt.h>
18#include <linux/dma-mapping.h>
19#include <linux/delay.h>
20#include <linux/io.h>
21#include <linux/slab.h>
22#include <linux/usb.h>
23
24#include <linux/usb/hcd.h>
25#include <linux/usb/ch11.h>
26
27#include "core.h"
28#include "hcd.h"
29
30/**
31 * dwc2_backup_global_registers() - Backup global controller registers.
32 * When suspending usb bus, registers needs to be backuped
33 * if controller power is disabled once suspended.
34 *
35 * @hsotg: Programming view of the DWC_otg controller
36 */
37int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
38{
39 struct dwc2_gregs_backup *gr;
40
41 dev_dbg(hsotg->dev, "%s\n", __func__);
42
43 /* Backup global regs */
44 gr = &hsotg->gr_backup;
45
46 gr->gotgctl = dwc2_readl(hsotg, GOTGCTL);
47 gr->gintmsk = dwc2_readl(hsotg, GINTMSK);
48 gr->gahbcfg = dwc2_readl(hsotg, GAHBCFG);
49 gr->gusbcfg = dwc2_readl(hsotg, GUSBCFG);
50 gr->grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
51 gr->gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ);
52 gr->gdfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
53 gr->pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
54 gr->glpmcfg = dwc2_readl(hsotg, GLPMCFG);
55 gr->gi2cctl = dwc2_readl(hsotg, GI2CCTL);
56 gr->pcgcctl = dwc2_readl(hsotg, PCGCTL);
57
58 gr->valid = true;
59 return 0;
60}
61
62/**
63 * dwc2_restore_global_registers() - Restore controller global registers.
64 * When resuming usb bus, device registers needs to be restored
65 * if controller power were disabled.
66 *
67 * @hsotg: Programming view of the DWC_otg controller
68 */
69int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg)
70{
71 struct dwc2_gregs_backup *gr;
72
73 dev_dbg(hsotg->dev, "%s\n", __func__);
74
75 /* Restore global regs */
76 gr = &hsotg->gr_backup;
77 if (!gr->valid) {
78 dev_err(hsotg->dev, "%s: no global registers to restore\n",
79 __func__);
80 return -EINVAL;
81 }
82 gr->valid = false;
83
84 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
85 dwc2_writel(hsotg, gr->gotgctl, GOTGCTL);
86 dwc2_writel(hsotg, gr->gintmsk, GINTMSK);
87 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
88 dwc2_writel(hsotg, gr->gahbcfg, GAHBCFG);
89 dwc2_writel(hsotg, gr->grxfsiz, GRXFSIZ);
90 dwc2_writel(hsotg, gr->gnptxfsiz, GNPTXFSIZ);
91 dwc2_writel(hsotg, gr->gdfifocfg, GDFIFOCFG);
92 dwc2_writel(hsotg, gr->pcgcctl1, PCGCCTL1);
93 dwc2_writel(hsotg, gr->glpmcfg, GLPMCFG);
94 dwc2_writel(hsotg, gr->pcgcctl, PCGCTL);
95 dwc2_writel(hsotg, gr->gi2cctl, GI2CCTL);
96
97 return 0;
98}
99
100/**
101 * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down.
102 *
103 * @hsotg: Programming view of the DWC_otg controller
104 * @rem_wakeup: indicates whether resume is initiated by Reset.
105 * @restore: Controller registers need to be restored
106 */
107int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
108 bool restore)
109{
110 struct dwc2_gregs_backup *gr;
111
112 gr = &hsotg->gr_backup;
113
114 /*
115 * Restore host or device regisers with the same mode core enterted
116 * to partial power down by checking "GOTGCTL_CURMODE_HOST" backup
117 * value of the "gotgctl" register.
118 */
119 if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
120 return dwc2_host_exit_partial_power_down(hsotg, rem_wakeup,
121 restore);
122 else
123 return dwc2_gadget_exit_partial_power_down(hsotg, restore);
124}
125
126/**
127 * dwc2_enter_partial_power_down() - Put controller in Partial Power Down.
128 *
129 * @hsotg: Programming view of the DWC_otg controller
130 */
131int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
132{
133 if (dwc2_is_host_mode(hsotg))
134 return dwc2_host_enter_partial_power_down(hsotg);
135 else
136 return dwc2_gadget_enter_partial_power_down(hsotg);
137}
138
139/**
140 * dwc2_restore_essential_regs() - Restore essiential regs of core.
141 *
142 * @hsotg: Programming view of the DWC_otg controller
143 * @rmode: Restore mode, enabled in case of remote-wakeup.
144 * @is_host: Host or device mode.
145 */
146static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode,
147 int is_host)
148{
149 u32 pcgcctl;
150 struct dwc2_gregs_backup *gr;
151 struct dwc2_dregs_backup *dr;
152 struct dwc2_hregs_backup *hr;
153
154 gr = &hsotg->gr_backup;
155 dr = &hsotg->dr_backup;
156 hr = &hsotg->hr_backup;
157
158 dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__);
159
160 /* Load restore values for [31:14] bits */
161 pcgcctl = (gr->pcgcctl & 0xffffc000);
162 /* If High Speed */
163 if (is_host) {
164 if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK))
165 pcgcctl |= BIT(17);
166 } else {
167 if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK))
168 pcgcctl |= BIT(17);
169 }
170 dwc2_writel(hsotg, pcgcctl, PCGCTL);
171
172 /* Umnask global Interrupt in GAHBCFG and restore it */
173 dwc2_writel(hsotg, gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, GAHBCFG);
174
175 /* Clear all pending interupts */
176 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
177
178 /* Unmask restore done interrupt */
179 dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTMSK);
180
181 /* Restore GUSBCFG and HCFG/DCFG */
182 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
183
184 if (is_host) {
185 dwc2_writel(hsotg, hr->hcfg, HCFG);
186 if (rmode)
187 pcgcctl |= PCGCTL_RESTOREMODE;
188 dwc2_writel(hsotg, pcgcctl, PCGCTL);
189 udelay(10);
190
191 pcgcctl |= PCGCTL_ESS_REG_RESTORED;
192 dwc2_writel(hsotg, pcgcctl, PCGCTL);
193 udelay(10);
194 } else {
195 dwc2_writel(hsotg, dr->dcfg, DCFG);
196 if (!rmode)
197 pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE;
198 dwc2_writel(hsotg, pcgcctl, PCGCTL);
199 udelay(10);
200
201 pcgcctl |= PCGCTL_ESS_REG_RESTORED;
202 dwc2_writel(hsotg, pcgcctl, PCGCTL);
203 udelay(10);
204 }
205}
206
207/**
208 * dwc2_hib_restore_common() - Common part of restore routine.
209 *
210 * @hsotg: Programming view of the DWC_otg controller
211 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
212 * @is_host: Host or device mode.
213 */
214void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
215 int is_host)
216{
217 u32 gpwrdn;
218
219 /* Switch-on voltage to the core */
220 gpwrdn = dwc2_readl(hsotg, GPWRDN);
221 gpwrdn &= ~GPWRDN_PWRDNSWTCH;
222 dwc2_writel(hsotg, gpwrdn, GPWRDN);
223 udelay(10);
224
225 /* Reset core */
226 gpwrdn = dwc2_readl(hsotg, GPWRDN);
227 gpwrdn &= ~GPWRDN_PWRDNRSTN;
228 dwc2_writel(hsotg, gpwrdn, GPWRDN);
229 udelay(10);
230
231 /* Enable restore from PMU */
232 gpwrdn = dwc2_readl(hsotg, GPWRDN);
233 gpwrdn |= GPWRDN_RESTORE;
234 dwc2_writel(hsotg, gpwrdn, GPWRDN);
235 udelay(10);
236
237 /* Disable Power Down Clamp */
238 gpwrdn = dwc2_readl(hsotg, GPWRDN);
239 gpwrdn &= ~GPWRDN_PWRDNCLMP;
240 dwc2_writel(hsotg, gpwrdn, GPWRDN);
241 udelay(50);
242
243 if (!is_host && rem_wakeup)
244 udelay(70);
245
246 /* Deassert reset core */
247 gpwrdn = dwc2_readl(hsotg, GPWRDN);
248 gpwrdn |= GPWRDN_PWRDNRSTN;
249 dwc2_writel(hsotg, gpwrdn, GPWRDN);
250 udelay(10);
251
252 /* Disable PMU interrupt */
253 gpwrdn = dwc2_readl(hsotg, GPWRDN);
254 gpwrdn &= ~GPWRDN_PMUINTSEL;
255 dwc2_writel(hsotg, gpwrdn, GPWRDN);
256 udelay(10);
257
258 /* Set Restore Essential Regs bit in PCGCCTL register */
259 dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host);
260
261 /*
262 * Wait For Restore_done Interrupt. This mechanism of polling the
263 * interrupt is introduced to avoid any possible race conditions
264 */
265 if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE,
266 20000)) {
267 dev_dbg(hsotg->dev,
268 "%s: Restore Done wasn't generated here\n",
269 __func__);
270 } else {
271 dev_dbg(hsotg->dev, "restore done generated here\n");
272
273 /*
274 * To avoid restore done interrupt storm after restore is
275 * generated clear GINTSTS_RESTOREDONE bit.
276 */
277 dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTSTS);
278 }
279}
280
281/**
282 * dwc2_wait_for_mode() - Waits for the controller mode.
283 * @hsotg: Programming view of the DWC_otg controller.
284 * @host_mode: If true, waits for host mode, otherwise device mode.
285 */
286static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
287 bool host_mode)
288{
289 ktime_t start;
290 ktime_t end;
291 unsigned int timeout = 110;
292
293 dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
294 host_mode ? "host" : "device");
295
296 start = ktime_get();
297
298 while (1) {
299 s64 ms;
300
301 if (dwc2_is_host_mode(hsotg) == host_mode) {
302 dev_vdbg(hsotg->dev, "%s mode set\n",
303 host_mode ? "Host" : "Device");
304 break;
305 }
306
307 end = ktime_get();
308 ms = ktime_to_ms(ktime_sub(end, start));
309
310 if (ms >= (s64)timeout) {
311 dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
312 __func__, host_mode ? "host" : "device");
313 break;
314 }
315
316 usleep_range(1000, 2000);
317 }
318}
319
320/**
321 * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
322 * filter is enabled.
323 *
324 * @hsotg: Programming view of DWC_otg controller
325 */
326static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
327{
328 u32 gsnpsid;
329 u32 ghwcfg4;
330
331 if (!dwc2_hw_is_otg(hsotg))
332 return false;
333
334 /* Check if core configuration includes the IDDIG filter. */
335 ghwcfg4 = dwc2_readl(hsotg, GHWCFG4);
336 if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
337 return false;
338
339 /*
340 * Check if the IDDIG debounce filter is bypassed. Available
341 * in core version >= 3.10a.
342 */
343 gsnpsid = dwc2_readl(hsotg, GSNPSID);
344 if (gsnpsid >= DWC2_CORE_REV_3_10a) {
345 u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
346
347 if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
348 return false;
349 }
350
351 return true;
352}
353
354/*
355 * dwc2_enter_hibernation() - Common function to enter hibernation.
356 *
357 * @hsotg: Programming view of the DWC_otg controller
358 * @is_host: True if core is in host mode.
359 *
360 * Return: 0 if successful, negative error code otherwise
361 */
362int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host)
363{
364 if (is_host)
365 return dwc2_host_enter_hibernation(hsotg);
366 else
367 return dwc2_gadget_enter_hibernation(hsotg);
368}
369
370/*
371 * dwc2_exit_hibernation() - Common function to exit from hibernation.
372 *
373 * @hsotg: Programming view of the DWC_otg controller
374 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
375 * @reset: Enabled in case of restore with reset.
376 * @is_host: True if core is in host mode.
377 *
378 * Return: 0 if successful, negative error code otherwise
379 */
380int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
381 int reset, int is_host)
382{
383 if (is_host)
384 return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset);
385 else
386 return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset);
387}
388
389/*
390 * Do core a soft reset of the core. Be careful with this because it
391 * resets all the internal state machines of the core.
392 */
393int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
394{
395 u32 greset;
396 bool wait_for_host_mode = false;
397
398 dev_vdbg(hsotg->dev, "%s()\n", __func__);
399
400 /*
401 * If the current mode is host, either due to the force mode
402 * bit being set (which persists after core reset) or the
403 * connector id pin, a core soft reset will temporarily reset
404 * the mode to device. A delay from the IDDIG debounce filter
405 * will occur before going back to host mode.
406 *
407 * Determine whether we will go back into host mode after a
408 * reset and account for this delay after the reset.
409 */
410 if (dwc2_iddig_filter_enabled(hsotg)) {
411 u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
412 u32 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
413
414 if (!(gotgctl & GOTGCTL_CONID_B) ||
415 (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
416 wait_for_host_mode = true;
417 }
418 }
419
420 /* Core Soft Reset */
421 greset = dwc2_readl(hsotg, GRSTCTL);
422 greset |= GRSTCTL_CSFTRST;
423 dwc2_writel(hsotg, greset, GRSTCTL);
424
425 if ((hsotg->hw_params.snpsid & DWC2_CORE_REV_MASK) <
426 (DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) {
427 if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL,
428 GRSTCTL_CSFTRST, 10000)) {
429 dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST\n",
430 __func__);
431 return -EBUSY;
432 }
433 } else {
434 if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL,
435 GRSTCTL_CSFTRST_DONE, 10000)) {
436 dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST_DONE\n",
437 __func__);
438 return -EBUSY;
439 }
440 greset = dwc2_readl(hsotg, GRSTCTL);
441 greset &= ~GRSTCTL_CSFTRST;
442 greset |= GRSTCTL_CSFTRST_DONE;
443 dwc2_writel(hsotg, greset, GRSTCTL);
444 }
445
446 /*
447 * Switching from device mode to host mode by disconnecting
448 * device cable core enters and exits form hibernation.
449 * However, the fifo map remains not cleared. It results
450 * to a WARNING (WARNING: CPU: 5 PID: 0 at drivers/usb/dwc2/
451 * gadget.c:307 dwc2_hsotg_init_fifo+0x12/0x152 [dwc2])
452 * if in host mode we disconnect the micro a to b host
453 * cable. Because core reset occurs.
454 * To avoid the WARNING, fifo_map should be cleared
455 * in dwc2_core_reset() function by taking into account configs.
456 * fifo_map must be cleared only if driver is configured in
457 * "CONFIG_USB_DWC2_PERIPHERAL" or "CONFIG_USB_DWC2_DUAL_ROLE"
458 * mode.
459 */
460 dwc2_clear_fifo_map(hsotg);
461
462 /* Wait for AHB master IDLE state */
463 if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
464 dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
465 __func__);
466 return -EBUSY;
467 }
468
469 if (wait_for_host_mode && !skip_wait)
470 dwc2_wait_for_mode(hsotg, true);
471
472 return 0;
473}
474
475/**
476 * dwc2_force_mode() - Force the mode of the controller.
477 *
478 * Forcing the mode is needed for two cases:
479 *
480 * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
481 * controller to stay in a particular mode regardless of ID pin
482 * changes. We do this once during probe.
483 *
484 * 2) During probe we want to read reset values of the hw
485 * configuration registers that are only available in either host or
486 * device mode. We may need to force the mode if the current mode does
487 * not allow us to access the register in the mode that we want.
488 *
489 * In either case it only makes sense to force the mode if the
490 * controller hardware is OTG capable.
491 *
492 * Checks are done in this function to determine whether doing a force
493 * would be valid or not.
494 *
495 * If a force is done, it requires a IDDIG debounce filter delay if
496 * the filter is configured and enabled. We poll the current mode of
497 * the controller to account for this delay.
498 *
499 * @hsotg: Programming view of DWC_otg controller
500 * @host: Host mode flag
501 */
502void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
503{
504 u32 gusbcfg;
505 u32 set;
506 u32 clear;
507
508 dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
509
510 /*
511 * Force mode has no effect if the hardware is not OTG.
512 */
513 if (!dwc2_hw_is_otg(hsotg))
514 return;
515
516 /*
517 * If dr_mode is either peripheral or host only, there is no
518 * need to ever force the mode to the opposite mode.
519 */
520 if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
521 return;
522
523 if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
524 return;
525
526 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
527
528 set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
529 clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
530
531 gusbcfg &= ~clear;
532 gusbcfg |= set;
533 dwc2_writel(hsotg, gusbcfg, GUSBCFG);
534
535 dwc2_wait_for_mode(hsotg, host);
536 return;
537}
538
539/**
540 * dwc2_clear_force_mode() - Clears the force mode bits.
541 *
542 * After clearing the bits, wait up to 100 ms to account for any
543 * potential IDDIG filter delay. We can't know if we expect this delay
544 * or not because the value of the connector ID status is affected by
545 * the force mode. We only need to call this once during probe if
546 * dr_mode == OTG.
547 *
548 * @hsotg: Programming view of DWC_otg controller
549 */
550static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
551{
552 u32 gusbcfg;
553
554 if (!dwc2_hw_is_otg(hsotg))
555 return;
556
557 dev_dbg(hsotg->dev, "Clearing force mode bits\n");
558
559 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
560 gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
561 gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
562 dwc2_writel(hsotg, gusbcfg, GUSBCFG);
563
564 if (dwc2_iddig_filter_enabled(hsotg))
565 msleep(100);
566}
567
568/*
569 * Sets or clears force mode based on the dr_mode parameter.
570 */
571void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
572{
573 switch (hsotg->dr_mode) {
574 case USB_DR_MODE_HOST:
575 /*
576 * NOTE: This is required for some rockchip soc based
577 * platforms on their host-only dwc2.
578 */
579 if (!dwc2_hw_is_otg(hsotg))
580 msleep(50);
581
582 break;
583 case USB_DR_MODE_PERIPHERAL:
584 dwc2_force_mode(hsotg, false);
585 break;
586 case USB_DR_MODE_OTG:
587 dwc2_clear_force_mode(hsotg);
588 break;
589 default:
590 dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
591 __func__, hsotg->dr_mode);
592 break;
593 }
594}
595
596/*
597 * dwc2_enable_acg - enable active clock gating feature
598 */
599void dwc2_enable_acg(struct dwc2_hsotg *hsotg)
600{
601 if (hsotg->params.acg_enable) {
602 u32 pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
603
604 dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n");
605 pcgcctl1 |= PCGCCTL1_GATEEN;
606 dwc2_writel(hsotg, pcgcctl1, PCGCCTL1);
607 }
608}
609
610/**
611 * dwc2_dump_host_registers() - Prints the host registers
612 *
613 * @hsotg: Programming view of DWC_otg controller
614 *
615 * NOTE: This function will be removed once the peripheral controller code
616 * is integrated and the driver is stable
617 */
618void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg)
619{
620#ifdef DEBUG
621 u32 __iomem *addr;
622 int i;
623
624 dev_dbg(hsotg->dev, "Host Global Registers\n");
625 addr = hsotg->regs + HCFG;
626 dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n",
627 (unsigned long)addr, dwc2_readl(hsotg, HCFG));
628 addr = hsotg->regs + HFIR;
629 dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n",
630 (unsigned long)addr, dwc2_readl(hsotg, HFIR));
631 addr = hsotg->regs + HFNUM;
632 dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n",
633 (unsigned long)addr, dwc2_readl(hsotg, HFNUM));
634 addr = hsotg->regs + HPTXSTS;
635 dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n",
636 (unsigned long)addr, dwc2_readl(hsotg, HPTXSTS));
637 addr = hsotg->regs + HAINT;
638 dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n",
639 (unsigned long)addr, dwc2_readl(hsotg, HAINT));
640 addr = hsotg->regs + HAINTMSK;
641 dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n",
642 (unsigned long)addr, dwc2_readl(hsotg, HAINTMSK));
643 if (hsotg->params.dma_desc_enable) {
644 addr = hsotg->regs + HFLBADDR;
645 dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
646 (unsigned long)addr, dwc2_readl(hsotg, HFLBADDR));
647 }
648
649 addr = hsotg->regs + HPRT0;
650 dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n",
651 (unsigned long)addr, dwc2_readl(hsotg, HPRT0));
652
653 for (i = 0; i < hsotg->params.host_channels; i++) {
654 dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
655 addr = hsotg->regs + HCCHAR(i);
656 dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n",
657 (unsigned long)addr, dwc2_readl(hsotg, HCCHAR(i)));
658 addr = hsotg->regs + HCSPLT(i);
659 dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n",
660 (unsigned long)addr, dwc2_readl(hsotg, HCSPLT(i)));
661 addr = hsotg->regs + HCINT(i);
662 dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n",
663 (unsigned long)addr, dwc2_readl(hsotg, HCINT(i)));
664 addr = hsotg->regs + HCINTMSK(i);
665 dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n",
666 (unsigned long)addr, dwc2_readl(hsotg, HCINTMSK(i)));
667 addr = hsotg->regs + HCTSIZ(i);
668 dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n",
669 (unsigned long)addr, dwc2_readl(hsotg, HCTSIZ(i)));
670 addr = hsotg->regs + HCDMA(i);
671 dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n",
672 (unsigned long)addr, dwc2_readl(hsotg, HCDMA(i)));
673 if (hsotg->params.dma_desc_enable) {
674 addr = hsotg->regs + HCDMAB(i);
675 dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n",
676 (unsigned long)addr, dwc2_readl(hsotg,
677 HCDMAB(i)));
678 }
679 }
680#endif
681}
682
683/**
684 * dwc2_dump_global_registers() - Prints the core global registers
685 *
686 * @hsotg: Programming view of DWC_otg controller
687 *
688 * NOTE: This function will be removed once the peripheral controller code
689 * is integrated and the driver is stable
690 */
691void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg)
692{
693#ifdef DEBUG
694 u32 __iomem *addr;
695
696 dev_dbg(hsotg->dev, "Core Global Registers\n");
697 addr = hsotg->regs + GOTGCTL;
698 dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n",
699 (unsigned long)addr, dwc2_readl(hsotg, GOTGCTL));
700 addr = hsotg->regs + GOTGINT;
701 dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n",
702 (unsigned long)addr, dwc2_readl(hsotg, GOTGINT));
703 addr = hsotg->regs + GAHBCFG;
704 dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n",
705 (unsigned long)addr, dwc2_readl(hsotg, GAHBCFG));
706 addr = hsotg->regs + GUSBCFG;
707 dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n",
708 (unsigned long)addr, dwc2_readl(hsotg, GUSBCFG));
709 addr = hsotg->regs + GRSTCTL;
710 dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n",
711 (unsigned long)addr, dwc2_readl(hsotg, GRSTCTL));
712 addr = hsotg->regs + GINTSTS;
713 dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n",
714 (unsigned long)addr, dwc2_readl(hsotg, GINTSTS));
715 addr = hsotg->regs + GINTMSK;
716 dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n",
717 (unsigned long)addr, dwc2_readl(hsotg, GINTMSK));
718 addr = hsotg->regs + GRXSTSR;
719 dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n",
720 (unsigned long)addr, dwc2_readl(hsotg, GRXSTSR));
721 addr = hsotg->regs + GRXFSIZ;
722 dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n",
723 (unsigned long)addr, dwc2_readl(hsotg, GRXFSIZ));
724 addr = hsotg->regs + GNPTXFSIZ;
725 dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n",
726 (unsigned long)addr, dwc2_readl(hsotg, GNPTXFSIZ));
727 addr = hsotg->regs + GNPTXSTS;
728 dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n",
729 (unsigned long)addr, dwc2_readl(hsotg, GNPTXSTS));
730 addr = hsotg->regs + GI2CCTL;
731 dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n",
732 (unsigned long)addr, dwc2_readl(hsotg, GI2CCTL));
733 addr = hsotg->regs + GPVNDCTL;
734 dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n",
735 (unsigned long)addr, dwc2_readl(hsotg, GPVNDCTL));
736 addr = hsotg->regs + GGPIO;
737 dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n",
738 (unsigned long)addr, dwc2_readl(hsotg, GGPIO));
739 addr = hsotg->regs + GUID;
740 dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n",
741 (unsigned long)addr, dwc2_readl(hsotg, GUID));
742 addr = hsotg->regs + GSNPSID;
743 dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n",
744 (unsigned long)addr, dwc2_readl(hsotg, GSNPSID));
745 addr = hsotg->regs + GHWCFG1;
746 dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n",
747 (unsigned long)addr, dwc2_readl(hsotg, GHWCFG1));
748 addr = hsotg->regs + GHWCFG2;
749 dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n",
750 (unsigned long)addr, dwc2_readl(hsotg, GHWCFG2));
751 addr = hsotg->regs + GHWCFG3;
752 dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n",
753 (unsigned long)addr, dwc2_readl(hsotg, GHWCFG3));
754 addr = hsotg->regs + GHWCFG4;
755 dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n",
756 (unsigned long)addr, dwc2_readl(hsotg, GHWCFG4));
757 addr = hsotg->regs + GLPMCFG;
758 dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n",
759 (unsigned long)addr, dwc2_readl(hsotg, GLPMCFG));
760 addr = hsotg->regs + GPWRDN;
761 dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n",
762 (unsigned long)addr, dwc2_readl(hsotg, GPWRDN));
763 addr = hsotg->regs + GDFIFOCFG;
764 dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n",
765 (unsigned long)addr, dwc2_readl(hsotg, GDFIFOCFG));
766 addr = hsotg->regs + HPTXFSIZ;
767 dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n",
768 (unsigned long)addr, dwc2_readl(hsotg, HPTXFSIZ));
769
770 addr = hsotg->regs + PCGCTL;
771 dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n",
772 (unsigned long)addr, dwc2_readl(hsotg, PCGCTL));
773#endif
774}
775
776/**
777 * dwc2_flush_tx_fifo() - Flushes a Tx FIFO
778 *
779 * @hsotg: Programming view of DWC_otg controller
780 * @num: Tx FIFO to flush
781 */
782void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num)
783{
784 u32 greset;
785
786 dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num);
787
788 /* Wait for AHB master IDLE state */
789 if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
790 dev_warn(hsotg->dev, "%s: HANG! AHB Idle GRSCTL\n",
791 __func__);
792
793 greset = GRSTCTL_TXFFLSH;
794 greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
795 dwc2_writel(hsotg, greset, GRSTCTL);
796
797 if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000))
798 dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n",
799 __func__);
800
801 /* Wait for at least 3 PHY Clocks */
802 udelay(1);
803}
804
805/**
806 * dwc2_flush_rx_fifo() - Flushes the Rx FIFO
807 *
808 * @hsotg: Programming view of DWC_otg controller
809 */
810void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
811{
812 u32 greset;
813
814 dev_vdbg(hsotg->dev, "%s()\n", __func__);
815
816 /* Wait for AHB master IDLE state */
817 if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
818 dev_warn(hsotg->dev, "%s: HANG! AHB Idle GRSCTL\n",
819 __func__);
820
821 greset = GRSTCTL_RXFFLSH;
822 dwc2_writel(hsotg, greset, GRSTCTL);
823
824 /* Wait for RxFIFO flush done */
825 if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000))
826 dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n",
827 __func__);
828
829 /* Wait for at least 3 PHY Clocks */
830 udelay(1);
831}
832
833bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
834{
835 if (dwc2_readl(hsotg, GSNPSID) == 0xffffffff)
836 return false;
837 else
838 return true;
839}
840
841/**
842 * dwc2_enable_global_interrupts() - Enables the controller's Global
843 * Interrupt in the AHB Config register
844 *
845 * @hsotg: Programming view of DWC_otg controller
846 */
847void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
848{
849 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
850
851 ahbcfg |= GAHBCFG_GLBL_INTR_EN;
852 dwc2_writel(hsotg, ahbcfg, GAHBCFG);
853}
854
855/**
856 * dwc2_disable_global_interrupts() - Disables the controller's Global
857 * Interrupt in the AHB Config register
858 *
859 * @hsotg: Programming view of DWC_otg controller
860 */
861void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
862{
863 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
864
865 ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
866 dwc2_writel(hsotg, ahbcfg, GAHBCFG);
867}
868
869/* Returns the controller's GHWCFG2.OTG_MODE. */
870unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg)
871{
872 u32 ghwcfg2 = dwc2_readl(hsotg, GHWCFG2);
873
874 return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
875 GHWCFG2_OP_MODE_SHIFT;
876}
877
878/* Returns true if the controller is capable of DRD. */
879bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
880{
881 unsigned int op_mode = dwc2_op_mode(hsotg);
882
883 return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
884 (op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
885 (op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
886}
887
888/* Returns true if the controller is host-only. */
889bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
890{
891 unsigned int op_mode = dwc2_op_mode(hsotg);
892
893 return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
894 (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
895}
896
897/* Returns true if the controller is device-only. */
898bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
899{
900 unsigned int op_mode = dwc2_op_mode(hsotg);
901
902 return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
903 (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
904}
905
906/**
907 * dwc2_hsotg_wait_bit_set - Waits for bit to be set.
908 * @hsotg: Programming view of DWC_otg controller.
909 * @offset: Register's offset where bit/bits must be set.
910 * @mask: Mask of the bit/bits which must be set.
911 * @timeout: Timeout to wait.
912 *
913 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
914 */
915int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
916 u32 timeout)
917{
918 u32 i;
919
920 for (i = 0; i < timeout; i++) {
921 if (dwc2_readl(hsotg, offset) & mask)
922 return 0;
923 udelay(1);
924 }
925
926 return -ETIMEDOUT;
927}
928
929/**
930 * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear.
931 * @hsotg: Programming view of DWC_otg controller.
932 * @offset: Register's offset where bit/bits must be set.
933 * @mask: Mask of the bit/bits which must be set.
934 * @timeout: Timeout to wait.
935 *
936 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
937 */
938int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
939 u32 timeout)
940{
941 u32 i;
942
943 for (i = 0; i < timeout; i++) {
944 if (!(dwc2_readl(hsotg, offset) & mask))
945 return 0;
946 udelay(1);
947 }
948
949 return -ETIMEDOUT;
950}
951
952/*
953 * Initializes the FSLSPClkSel field of the HCFG register depending on the
954 * PHY type
955 */
956void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
957{
958 u32 hcfg, val;
959
960 if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
961 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
962 hsotg->params.ulpi_fs_ls) ||
963 hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
964 /* Full speed PHY */
965 val = HCFG_FSLSPCLKSEL_48_MHZ;
966 } else {
967 /* High speed PHY running at full speed or high speed */
968 val = HCFG_FSLSPCLKSEL_30_60_MHZ;
969 }
970
971 dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
972 hcfg = dwc2_readl(hsotg, HCFG);
973 hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
974 hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
975 dwc2_writel(hsotg, hcfg, HCFG);
976}
977
978static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
979{
980 u32 usbcfg, ggpio, i2cctl;
981 int retval = 0;
982
983 /*
984 * core_init() is now called on every switch so only call the
985 * following for the first time through
986 */
987 if (select_phy) {
988 dev_dbg(hsotg->dev, "FS PHY selected\n");
989
990 usbcfg = dwc2_readl(hsotg, GUSBCFG);
991 if (!(usbcfg & GUSBCFG_PHYSEL)) {
992 usbcfg |= GUSBCFG_PHYSEL;
993 dwc2_writel(hsotg, usbcfg, GUSBCFG);
994
995 /* Reset after a PHY select */
996 retval = dwc2_core_reset(hsotg, false);
997
998 if (retval) {
999 dev_err(hsotg->dev,
1000 "%s: Reset failed, aborting", __func__);
1001 return retval;
1002 }
1003 }
1004
1005 if (hsotg->params.activate_stm_fs_transceiver) {
1006 ggpio = dwc2_readl(hsotg, GGPIO);
1007 if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
1008 dev_dbg(hsotg->dev, "Activating transceiver\n");
1009 /*
1010 * STM32F4x9 uses the GGPIO register as general
1011 * core configuration register.
1012 */
1013 ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
1014 dwc2_writel(hsotg, ggpio, GGPIO);
1015 }
1016 }
1017 }
1018
1019 /*
1020 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
1021 * do this on HNP Dev/Host mode switches (done in dev_init and
1022 * host_init).
1023 */
1024 if (dwc2_is_host_mode(hsotg))
1025 dwc2_init_fs_ls_pclk_sel(hsotg);
1026
1027 if (hsotg->params.i2c_enable) {
1028 dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
1029
1030 /* Program GUSBCFG.OtgUtmiFsSel to I2C */
1031 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1032 usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
1033 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1034
1035 /* Program GI2CCTL.I2CEn */
1036 i2cctl = dwc2_readl(hsotg, GI2CCTL);
1037 i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
1038 i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
1039 i2cctl &= ~GI2CCTL_I2CEN;
1040 dwc2_writel(hsotg, i2cctl, GI2CCTL);
1041 i2cctl |= GI2CCTL_I2CEN;
1042 dwc2_writel(hsotg, i2cctl, GI2CCTL);
1043 }
1044
1045 return retval;
1046}
1047
1048static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1049{
1050 u32 usbcfg, usbcfg_old;
1051 int retval = 0;
1052
1053 if (!select_phy)
1054 return 0;
1055
1056 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1057 usbcfg_old = usbcfg;
1058
1059 /*
1060 * HS PHY parameters. These parameters are preserved during soft reset
1061 * so only program the first time. Do a soft reset immediately after
1062 * setting phyif.
1063 */
1064 switch (hsotg->params.phy_type) {
1065 case DWC2_PHY_TYPE_PARAM_ULPI:
1066 /* ULPI interface */
1067 dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
1068 usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
1069 usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
1070 if (hsotg->params.phy_ulpi_ddr)
1071 usbcfg |= GUSBCFG_DDRSEL;
1072
1073 /* Set external VBUS indicator as needed. */
1074 if (hsotg->params.oc_disable)
1075 usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
1076 GUSBCFG_INDICATORPASSTHROUGH);
1077 break;
1078 case DWC2_PHY_TYPE_PARAM_UTMI:
1079 /* UTMI+ interface */
1080 dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
1081 usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
1082 if (hsotg->params.phy_utmi_width == 16)
1083 usbcfg |= GUSBCFG_PHYIF16;
1084 break;
1085 default:
1086 dev_err(hsotg->dev, "FS PHY selected at HS!\n");
1087 break;
1088 }
1089
1090 if (usbcfg != usbcfg_old) {
1091 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1092
1093 /* Reset after setting the PHY parameters */
1094 retval = dwc2_core_reset(hsotg, false);
1095 if (retval) {
1096 dev_err(hsotg->dev,
1097 "%s: Reset failed, aborting", __func__);
1098 return retval;
1099 }
1100 }
1101
1102 return retval;
1103}
1104
1105static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg)
1106{
1107 u32 usbcfg;
1108
1109 if (hsotg->params.phy_type != DWC2_PHY_TYPE_PARAM_UTMI)
1110 return;
1111
1112 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1113
1114 usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
1115 if (hsotg->params.phy_utmi_width == 16)
1116 usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
1117 else
1118 usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
1119
1120 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1121}
1122
1123int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1124{
1125 u32 usbcfg;
1126 u32 otgctl;
1127 int retval = 0;
1128
1129 if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
1130 hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
1131 hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
1132 /* If FS/LS mode with FS/LS PHY */
1133 retval = dwc2_fs_phy_init(hsotg, select_phy);
1134 if (retval)
1135 return retval;
1136 } else {
1137 /* High speed PHY */
1138 retval = dwc2_hs_phy_init(hsotg, select_phy);
1139 if (retval)
1140 return retval;
1141
1142 if (dwc2_is_device_mode(hsotg))
1143 dwc2_set_turnaround_time(hsotg);
1144 }
1145
1146 if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
1147 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
1148 hsotg->params.ulpi_fs_ls) {
1149 dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
1150 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1151 usbcfg |= GUSBCFG_ULPI_FS_LS;
1152 usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
1153 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1154 } else {
1155 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1156 usbcfg &= ~GUSBCFG_ULPI_FS_LS;
1157 usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
1158 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1159 }
1160
1161 if (!hsotg->params.activate_ingenic_overcurrent_detection) {
1162 if (dwc2_is_host_mode(hsotg)) {
1163 otgctl = readl(hsotg->regs + GOTGCTL);
1164 otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL;
1165 writel(otgctl, hsotg->regs + GOTGCTL);
1166 }
1167 }
1168
1169 return retval;
1170}
1171
1172MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
1173MODULE_AUTHOR("Synopsys, Inc.");
1174MODULE_LICENSE("Dual BSD/GPL");
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * core.c - DesignWare HS OTG Controller common routines
4 *
5 * Copyright (C) 2004-2013 Synopsys, Inc.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. The names of the above-listed copyright holders may not be used
17 * to endorse or promote products derived from this software without
18 * specific prior written permission.
19 *
20 * ALTERNATIVELY, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any
23 * later version.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 */
37
38/*
39 * The Core code provides basic services for accessing and managing the
40 * DWC_otg hardware. These services are used by both the Host Controller
41 * Driver and the Peripheral Controller Driver.
42 */
43#include <linux/kernel.h>
44#include <linux/module.h>
45#include <linux/moduleparam.h>
46#include <linux/spinlock.h>
47#include <linux/interrupt.h>
48#include <linux/dma-mapping.h>
49#include <linux/delay.h>
50#include <linux/io.h>
51#include <linux/slab.h>
52#include <linux/usb.h>
53
54#include <linux/usb/hcd.h>
55#include <linux/usb/ch11.h>
56
57#include "core.h"
58#include "hcd.h"
59
60/**
61 * dwc2_backup_global_registers() - Backup global controller registers.
62 * When suspending usb bus, registers needs to be backuped
63 * if controller power is disabled once suspended.
64 *
65 * @hsotg: Programming view of the DWC_otg controller
66 */
67int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
68{
69 struct dwc2_gregs_backup *gr;
70
71 dev_dbg(hsotg->dev, "%s\n", __func__);
72
73 /* Backup global regs */
74 gr = &hsotg->gr_backup;
75
76 gr->gotgctl = dwc2_readl(hsotg, GOTGCTL);
77 gr->gintmsk = dwc2_readl(hsotg, GINTMSK);
78 gr->gahbcfg = dwc2_readl(hsotg, GAHBCFG);
79 gr->gusbcfg = dwc2_readl(hsotg, GUSBCFG);
80 gr->grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
81 gr->gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ);
82 gr->gdfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
83 gr->pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
84 gr->glpmcfg = dwc2_readl(hsotg, GLPMCFG);
85 gr->gi2cctl = dwc2_readl(hsotg, GI2CCTL);
86 gr->pcgcctl = dwc2_readl(hsotg, PCGCTL);
87
88 gr->valid = true;
89 return 0;
90}
91
92/**
93 * dwc2_restore_global_registers() - Restore controller global registers.
94 * When resuming usb bus, device registers needs to be restored
95 * if controller power were disabled.
96 *
97 * @hsotg: Programming view of the DWC_otg controller
98 */
99int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg)
100{
101 struct dwc2_gregs_backup *gr;
102
103 dev_dbg(hsotg->dev, "%s\n", __func__);
104
105 /* Restore global regs */
106 gr = &hsotg->gr_backup;
107 if (!gr->valid) {
108 dev_err(hsotg->dev, "%s: no global registers to restore\n",
109 __func__);
110 return -EINVAL;
111 }
112 gr->valid = false;
113
114 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
115 dwc2_writel(hsotg, gr->gotgctl, GOTGCTL);
116 dwc2_writel(hsotg, gr->gintmsk, GINTMSK);
117 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
118 dwc2_writel(hsotg, gr->gahbcfg, GAHBCFG);
119 dwc2_writel(hsotg, gr->grxfsiz, GRXFSIZ);
120 dwc2_writel(hsotg, gr->gnptxfsiz, GNPTXFSIZ);
121 dwc2_writel(hsotg, gr->gdfifocfg, GDFIFOCFG);
122 dwc2_writel(hsotg, gr->pcgcctl1, PCGCCTL1);
123 dwc2_writel(hsotg, gr->glpmcfg, GLPMCFG);
124 dwc2_writel(hsotg, gr->pcgcctl, PCGCTL);
125 dwc2_writel(hsotg, gr->gi2cctl, GI2CCTL);
126
127 return 0;
128}
129
130/**
131 * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down.
132 *
133 * @hsotg: Programming view of the DWC_otg controller
134 * @restore: Controller registers need to be restored
135 */
136int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, bool restore)
137{
138 u32 pcgcctl;
139 int ret = 0;
140
141 if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL)
142 return -ENOTSUPP;
143
144 pcgcctl = dwc2_readl(hsotg, PCGCTL);
145 pcgcctl &= ~PCGCTL_STOPPCLK;
146 dwc2_writel(hsotg, pcgcctl, PCGCTL);
147
148 pcgcctl = dwc2_readl(hsotg, PCGCTL);
149 pcgcctl &= ~PCGCTL_PWRCLMP;
150 dwc2_writel(hsotg, pcgcctl, PCGCTL);
151
152 pcgcctl = dwc2_readl(hsotg, PCGCTL);
153 pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
154 dwc2_writel(hsotg, pcgcctl, PCGCTL);
155
156 udelay(100);
157 if (restore) {
158 ret = dwc2_restore_global_registers(hsotg);
159 if (ret) {
160 dev_err(hsotg->dev, "%s: failed to restore registers\n",
161 __func__);
162 return ret;
163 }
164 if (dwc2_is_host_mode(hsotg)) {
165 ret = dwc2_restore_host_registers(hsotg);
166 if (ret) {
167 dev_err(hsotg->dev, "%s: failed to restore host registers\n",
168 __func__);
169 return ret;
170 }
171 } else {
172 ret = dwc2_restore_device_registers(hsotg, 0);
173 if (ret) {
174 dev_err(hsotg->dev, "%s: failed to restore device registers\n",
175 __func__);
176 return ret;
177 }
178 }
179 }
180
181 return ret;
182}
183
184/**
185 * dwc2_enter_partial_power_down() - Put controller in Partial Power Down.
186 *
187 * @hsotg: Programming view of the DWC_otg controller
188 */
189int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
190{
191 u32 pcgcctl;
192 int ret = 0;
193
194 if (!hsotg->params.power_down)
195 return -ENOTSUPP;
196
197 /* Backup all registers */
198 ret = dwc2_backup_global_registers(hsotg);
199 if (ret) {
200 dev_err(hsotg->dev, "%s: failed to backup global registers\n",
201 __func__);
202 return ret;
203 }
204
205 if (dwc2_is_host_mode(hsotg)) {
206 ret = dwc2_backup_host_registers(hsotg);
207 if (ret) {
208 dev_err(hsotg->dev, "%s: failed to backup host registers\n",
209 __func__);
210 return ret;
211 }
212 } else {
213 ret = dwc2_backup_device_registers(hsotg);
214 if (ret) {
215 dev_err(hsotg->dev, "%s: failed to backup device registers\n",
216 __func__);
217 return ret;
218 }
219 }
220
221 /*
222 * Clear any pending interrupts since dwc2 will not be able to
223 * clear them after entering partial_power_down.
224 */
225 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
226
227 /* Put the controller in low power state */
228 pcgcctl = dwc2_readl(hsotg, PCGCTL);
229
230 pcgcctl |= PCGCTL_PWRCLMP;
231 dwc2_writel(hsotg, pcgcctl, PCGCTL);
232 ndelay(20);
233
234 pcgcctl |= PCGCTL_RSTPDWNMODULE;
235 dwc2_writel(hsotg, pcgcctl, PCGCTL);
236 ndelay(20);
237
238 pcgcctl |= PCGCTL_STOPPCLK;
239 dwc2_writel(hsotg, pcgcctl, PCGCTL);
240
241 return ret;
242}
243
244/**
245 * dwc2_restore_essential_regs() - Restore essiential regs of core.
246 *
247 * @hsotg: Programming view of the DWC_otg controller
248 * @rmode: Restore mode, enabled in case of remote-wakeup.
249 * @is_host: Host or device mode.
250 */
251static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode,
252 int is_host)
253{
254 u32 pcgcctl;
255 struct dwc2_gregs_backup *gr;
256 struct dwc2_dregs_backup *dr;
257 struct dwc2_hregs_backup *hr;
258
259 gr = &hsotg->gr_backup;
260 dr = &hsotg->dr_backup;
261 hr = &hsotg->hr_backup;
262
263 dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__);
264
265 /* Load restore values for [31:14] bits */
266 pcgcctl = (gr->pcgcctl & 0xffffc000);
267 /* If High Speed */
268 if (is_host) {
269 if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK))
270 pcgcctl |= BIT(17);
271 } else {
272 if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK))
273 pcgcctl |= BIT(17);
274 }
275 dwc2_writel(hsotg, pcgcctl, PCGCTL);
276
277 /* Umnask global Interrupt in GAHBCFG and restore it */
278 dwc2_writel(hsotg, gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, GAHBCFG);
279
280 /* Clear all pending interupts */
281 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
282
283 /* Unmask restore done interrupt */
284 dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTMSK);
285
286 /* Restore GUSBCFG and HCFG/DCFG */
287 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
288
289 if (is_host) {
290 dwc2_writel(hsotg, hr->hcfg, HCFG);
291 if (rmode)
292 pcgcctl |= PCGCTL_RESTOREMODE;
293 dwc2_writel(hsotg, pcgcctl, PCGCTL);
294 udelay(10);
295
296 pcgcctl |= PCGCTL_ESS_REG_RESTORED;
297 dwc2_writel(hsotg, pcgcctl, PCGCTL);
298 udelay(10);
299 } else {
300 dwc2_writel(hsotg, dr->dcfg, DCFG);
301 if (!rmode)
302 pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE;
303 dwc2_writel(hsotg, pcgcctl, PCGCTL);
304 udelay(10);
305
306 pcgcctl |= PCGCTL_ESS_REG_RESTORED;
307 dwc2_writel(hsotg, pcgcctl, PCGCTL);
308 udelay(10);
309 }
310}
311
312/**
313 * dwc2_hib_restore_common() - Common part of restore routine.
314 *
315 * @hsotg: Programming view of the DWC_otg controller
316 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
317 * @is_host: Host or device mode.
318 */
319void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
320 int is_host)
321{
322 u32 gpwrdn;
323
324 /* Switch-on voltage to the core */
325 gpwrdn = dwc2_readl(hsotg, GPWRDN);
326 gpwrdn &= ~GPWRDN_PWRDNSWTCH;
327 dwc2_writel(hsotg, gpwrdn, GPWRDN);
328 udelay(10);
329
330 /* Reset core */
331 gpwrdn = dwc2_readl(hsotg, GPWRDN);
332 gpwrdn &= ~GPWRDN_PWRDNRSTN;
333 dwc2_writel(hsotg, gpwrdn, GPWRDN);
334 udelay(10);
335
336 /* Enable restore from PMU */
337 gpwrdn = dwc2_readl(hsotg, GPWRDN);
338 gpwrdn |= GPWRDN_RESTORE;
339 dwc2_writel(hsotg, gpwrdn, GPWRDN);
340 udelay(10);
341
342 /* Disable Power Down Clamp */
343 gpwrdn = dwc2_readl(hsotg, GPWRDN);
344 gpwrdn &= ~GPWRDN_PWRDNCLMP;
345 dwc2_writel(hsotg, gpwrdn, GPWRDN);
346 udelay(50);
347
348 if (!is_host && rem_wakeup)
349 udelay(70);
350
351 /* Deassert reset core */
352 gpwrdn = dwc2_readl(hsotg, GPWRDN);
353 gpwrdn |= GPWRDN_PWRDNRSTN;
354 dwc2_writel(hsotg, gpwrdn, GPWRDN);
355 udelay(10);
356
357 /* Disable PMU interrupt */
358 gpwrdn = dwc2_readl(hsotg, GPWRDN);
359 gpwrdn &= ~GPWRDN_PMUINTSEL;
360 dwc2_writel(hsotg, gpwrdn, GPWRDN);
361 udelay(10);
362
363 /* Set Restore Essential Regs bit in PCGCCTL register */
364 dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host);
365
366 /*
367 * Wait For Restore_done Interrupt. This mechanism of polling the
368 * interrupt is introduced to avoid any possible race conditions
369 */
370 if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE,
371 20000)) {
372 dev_dbg(hsotg->dev,
373 "%s: Restore Done wan't generated here\n",
374 __func__);
375 } else {
376 dev_dbg(hsotg->dev, "restore done generated here\n");
377 }
378}
379
380/**
381 * dwc2_wait_for_mode() - Waits for the controller mode.
382 * @hsotg: Programming view of the DWC_otg controller.
383 * @host_mode: If true, waits for host mode, otherwise device mode.
384 */
385static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
386 bool host_mode)
387{
388 ktime_t start;
389 ktime_t end;
390 unsigned int timeout = 110;
391
392 dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
393 host_mode ? "host" : "device");
394
395 start = ktime_get();
396
397 while (1) {
398 s64 ms;
399
400 if (dwc2_is_host_mode(hsotg) == host_mode) {
401 dev_vdbg(hsotg->dev, "%s mode set\n",
402 host_mode ? "Host" : "Device");
403 break;
404 }
405
406 end = ktime_get();
407 ms = ktime_to_ms(ktime_sub(end, start));
408
409 if (ms >= (s64)timeout) {
410 dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
411 __func__, host_mode ? "host" : "device");
412 break;
413 }
414
415 usleep_range(1000, 2000);
416 }
417}
418
419/**
420 * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
421 * filter is enabled.
422 *
423 * @hsotg: Programming view of DWC_otg controller
424 */
425static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
426{
427 u32 gsnpsid;
428 u32 ghwcfg4;
429
430 if (!dwc2_hw_is_otg(hsotg))
431 return false;
432
433 /* Check if core configuration includes the IDDIG filter. */
434 ghwcfg4 = dwc2_readl(hsotg, GHWCFG4);
435 if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
436 return false;
437
438 /*
439 * Check if the IDDIG debounce filter is bypassed. Available
440 * in core version >= 3.10a.
441 */
442 gsnpsid = dwc2_readl(hsotg, GSNPSID);
443 if (gsnpsid >= DWC2_CORE_REV_3_10a) {
444 u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
445
446 if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
447 return false;
448 }
449
450 return true;
451}
452
453/*
454 * dwc2_enter_hibernation() - Common function to enter hibernation.
455 *
456 * @hsotg: Programming view of the DWC_otg controller
457 * @is_host: True if core is in host mode.
458 *
459 * Return: 0 if successful, negative error code otherwise
460 */
461int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host)
462{
463 if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_HIBERNATION)
464 return -ENOTSUPP;
465
466 if (is_host)
467 return dwc2_host_enter_hibernation(hsotg);
468 else
469 return dwc2_gadget_enter_hibernation(hsotg);
470}
471
472/*
473 * dwc2_exit_hibernation() - Common function to exit from hibernation.
474 *
475 * @hsotg: Programming view of the DWC_otg controller
476 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
477 * @reset: Enabled in case of restore with reset.
478 * @is_host: True if core is in host mode.
479 *
480 * Return: 0 if successful, negative error code otherwise
481 */
482int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
483 int reset, int is_host)
484{
485 if (is_host)
486 return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset);
487 else
488 return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset);
489}
490
491/*
492 * Do core a soft reset of the core. Be careful with this because it
493 * resets all the internal state machines of the core.
494 */
495int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
496{
497 u32 greset;
498 bool wait_for_host_mode = false;
499
500 dev_vdbg(hsotg->dev, "%s()\n", __func__);
501
502 /*
503 * If the current mode is host, either due to the force mode
504 * bit being set (which persists after core reset) or the
505 * connector id pin, a core soft reset will temporarily reset
506 * the mode to device. A delay from the IDDIG debounce filter
507 * will occur before going back to host mode.
508 *
509 * Determine whether we will go back into host mode after a
510 * reset and account for this delay after the reset.
511 */
512 if (dwc2_iddig_filter_enabled(hsotg)) {
513 u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
514 u32 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
515
516 if (!(gotgctl & GOTGCTL_CONID_B) ||
517 (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
518 wait_for_host_mode = true;
519 }
520 }
521
522 /* Core Soft Reset */
523 greset = dwc2_readl(hsotg, GRSTCTL);
524 greset |= GRSTCTL_CSFTRST;
525 dwc2_writel(hsotg, greset, GRSTCTL);
526
527 if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_CSFTRST, 50)) {
528 dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST\n",
529 __func__);
530 return -EBUSY;
531 }
532
533 /* Wait for AHB master IDLE state */
534 if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
535 dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
536 __func__);
537 return -EBUSY;
538 }
539
540 if (wait_for_host_mode && !skip_wait)
541 dwc2_wait_for_mode(hsotg, true);
542
543 return 0;
544}
545
546/**
547 * dwc2_force_mode() - Force the mode of the controller.
548 *
549 * Forcing the mode is needed for two cases:
550 *
551 * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
552 * controller to stay in a particular mode regardless of ID pin
553 * changes. We do this once during probe.
554 *
555 * 2) During probe we want to read reset values of the hw
556 * configuration registers that are only available in either host or
557 * device mode. We may need to force the mode if the current mode does
558 * not allow us to access the register in the mode that we want.
559 *
560 * In either case it only makes sense to force the mode if the
561 * controller hardware is OTG capable.
562 *
563 * Checks are done in this function to determine whether doing a force
564 * would be valid or not.
565 *
566 * If a force is done, it requires a IDDIG debounce filter delay if
567 * the filter is configured and enabled. We poll the current mode of
568 * the controller to account for this delay.
569 *
570 * @hsotg: Programming view of DWC_otg controller
571 * @host: Host mode flag
572 */
573void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
574{
575 u32 gusbcfg;
576 u32 set;
577 u32 clear;
578
579 dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
580
581 /*
582 * Force mode has no effect if the hardware is not OTG.
583 */
584 if (!dwc2_hw_is_otg(hsotg))
585 return;
586
587 /*
588 * If dr_mode is either peripheral or host only, there is no
589 * need to ever force the mode to the opposite mode.
590 */
591 if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
592 return;
593
594 if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
595 return;
596
597 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
598
599 set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
600 clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
601
602 gusbcfg &= ~clear;
603 gusbcfg |= set;
604 dwc2_writel(hsotg, gusbcfg, GUSBCFG);
605
606 dwc2_wait_for_mode(hsotg, host);
607 return;
608}
609
610/**
611 * dwc2_clear_force_mode() - Clears the force mode bits.
612 *
613 * After clearing the bits, wait up to 100 ms to account for any
614 * potential IDDIG filter delay. We can't know if we expect this delay
615 * or not because the value of the connector ID status is affected by
616 * the force mode. We only need to call this once during probe if
617 * dr_mode == OTG.
618 *
619 * @hsotg: Programming view of DWC_otg controller
620 */
621static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
622{
623 u32 gusbcfg;
624
625 if (!dwc2_hw_is_otg(hsotg))
626 return;
627
628 dev_dbg(hsotg->dev, "Clearing force mode bits\n");
629
630 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
631 gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
632 gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
633 dwc2_writel(hsotg, gusbcfg, GUSBCFG);
634
635 if (dwc2_iddig_filter_enabled(hsotg))
636 msleep(100);
637}
638
639/*
640 * Sets or clears force mode based on the dr_mode parameter.
641 */
642void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
643{
644 switch (hsotg->dr_mode) {
645 case USB_DR_MODE_HOST:
646 /*
647 * NOTE: This is required for some rockchip soc based
648 * platforms on their host-only dwc2.
649 */
650 if (!dwc2_hw_is_otg(hsotg))
651 msleep(50);
652
653 break;
654 case USB_DR_MODE_PERIPHERAL:
655 dwc2_force_mode(hsotg, false);
656 break;
657 case USB_DR_MODE_OTG:
658 dwc2_clear_force_mode(hsotg);
659 break;
660 default:
661 dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
662 __func__, hsotg->dr_mode);
663 break;
664 }
665}
666
667/*
668 * dwc2_enable_acg - enable active clock gating feature
669 */
670void dwc2_enable_acg(struct dwc2_hsotg *hsotg)
671{
672 if (hsotg->params.acg_enable) {
673 u32 pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
674
675 dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n");
676 pcgcctl1 |= PCGCCTL1_GATEEN;
677 dwc2_writel(hsotg, pcgcctl1, PCGCCTL1);
678 }
679}
680
681/**
682 * dwc2_dump_host_registers() - Prints the host registers
683 *
684 * @hsotg: Programming view of DWC_otg controller
685 *
686 * NOTE: This function will be removed once the peripheral controller code
687 * is integrated and the driver is stable
688 */
689void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg)
690{
691#ifdef DEBUG
692 u32 __iomem *addr;
693 int i;
694
695 dev_dbg(hsotg->dev, "Host Global Registers\n");
696 addr = hsotg->regs + HCFG;
697 dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n",
698 (unsigned long)addr, dwc2_readl(hsotg, HCFG));
699 addr = hsotg->regs + HFIR;
700 dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n",
701 (unsigned long)addr, dwc2_readl(hsotg, HFIR));
702 addr = hsotg->regs + HFNUM;
703 dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n",
704 (unsigned long)addr, dwc2_readl(hsotg, HFNUM));
705 addr = hsotg->regs + HPTXSTS;
706 dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n",
707 (unsigned long)addr, dwc2_readl(hsotg, HPTXSTS));
708 addr = hsotg->regs + HAINT;
709 dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n",
710 (unsigned long)addr, dwc2_readl(hsotg, HAINT));
711 addr = hsotg->regs + HAINTMSK;
712 dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n",
713 (unsigned long)addr, dwc2_readl(hsotg, HAINTMSK));
714 if (hsotg->params.dma_desc_enable) {
715 addr = hsotg->regs + HFLBADDR;
716 dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
717 (unsigned long)addr, dwc2_readl(hsotg, HFLBADDR));
718 }
719
720 addr = hsotg->regs + HPRT0;
721 dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n",
722 (unsigned long)addr, dwc2_readl(hsotg, HPRT0));
723
724 for (i = 0; i < hsotg->params.host_channels; i++) {
725 dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
726 addr = hsotg->regs + HCCHAR(i);
727 dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n",
728 (unsigned long)addr, dwc2_readl(hsotg, HCCHAR(i)));
729 addr = hsotg->regs + HCSPLT(i);
730 dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n",
731 (unsigned long)addr, dwc2_readl(hsotg, HCSPLT(i)));
732 addr = hsotg->regs + HCINT(i);
733 dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n",
734 (unsigned long)addr, dwc2_readl(hsotg, HCINT(i)));
735 addr = hsotg->regs + HCINTMSK(i);
736 dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n",
737 (unsigned long)addr, dwc2_readl(hsotg, HCINTMSK(i)));
738 addr = hsotg->regs + HCTSIZ(i);
739 dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n",
740 (unsigned long)addr, dwc2_readl(hsotg, HCTSIZ(i)));
741 addr = hsotg->regs + HCDMA(i);
742 dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n",
743 (unsigned long)addr, dwc2_readl(hsotg, HCDMA(i)));
744 if (hsotg->params.dma_desc_enable) {
745 addr = hsotg->regs + HCDMAB(i);
746 dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n",
747 (unsigned long)addr, dwc2_readl(hsotg,
748 HCDMAB(i)));
749 }
750 }
751#endif
752}
753
754/**
755 * dwc2_dump_global_registers() - Prints the core global registers
756 *
757 * @hsotg: Programming view of DWC_otg controller
758 *
759 * NOTE: This function will be removed once the peripheral controller code
760 * is integrated and the driver is stable
761 */
762void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg)
763{
764#ifdef DEBUG
765 u32 __iomem *addr;
766
767 dev_dbg(hsotg->dev, "Core Global Registers\n");
768 addr = hsotg->regs + GOTGCTL;
769 dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n",
770 (unsigned long)addr, dwc2_readl(hsotg, GOTGCTL));
771 addr = hsotg->regs + GOTGINT;
772 dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n",
773 (unsigned long)addr, dwc2_readl(hsotg, GOTGINT));
774 addr = hsotg->regs + GAHBCFG;
775 dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n",
776 (unsigned long)addr, dwc2_readl(hsotg, GAHBCFG));
777 addr = hsotg->regs + GUSBCFG;
778 dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n",
779 (unsigned long)addr, dwc2_readl(hsotg, GUSBCFG));
780 addr = hsotg->regs + GRSTCTL;
781 dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n",
782 (unsigned long)addr, dwc2_readl(hsotg, GRSTCTL));
783 addr = hsotg->regs + GINTSTS;
784 dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n",
785 (unsigned long)addr, dwc2_readl(hsotg, GINTSTS));
786 addr = hsotg->regs + GINTMSK;
787 dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n",
788 (unsigned long)addr, dwc2_readl(hsotg, GINTMSK));
789 addr = hsotg->regs + GRXSTSR;
790 dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n",
791 (unsigned long)addr, dwc2_readl(hsotg, GRXSTSR));
792 addr = hsotg->regs + GRXFSIZ;
793 dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n",
794 (unsigned long)addr, dwc2_readl(hsotg, GRXFSIZ));
795 addr = hsotg->regs + GNPTXFSIZ;
796 dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n",
797 (unsigned long)addr, dwc2_readl(hsotg, GNPTXFSIZ));
798 addr = hsotg->regs + GNPTXSTS;
799 dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n",
800 (unsigned long)addr, dwc2_readl(hsotg, GNPTXSTS));
801 addr = hsotg->regs + GI2CCTL;
802 dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n",
803 (unsigned long)addr, dwc2_readl(hsotg, GI2CCTL));
804 addr = hsotg->regs + GPVNDCTL;
805 dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n",
806 (unsigned long)addr, dwc2_readl(hsotg, GPVNDCTL));
807 addr = hsotg->regs + GGPIO;
808 dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n",
809 (unsigned long)addr, dwc2_readl(hsotg, GGPIO));
810 addr = hsotg->regs + GUID;
811 dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n",
812 (unsigned long)addr, dwc2_readl(hsotg, GUID));
813 addr = hsotg->regs + GSNPSID;
814 dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n",
815 (unsigned long)addr, dwc2_readl(hsotg, GSNPSID));
816 addr = hsotg->regs + GHWCFG1;
817 dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n",
818 (unsigned long)addr, dwc2_readl(hsotg, GHWCFG1));
819 addr = hsotg->regs + GHWCFG2;
820 dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n",
821 (unsigned long)addr, dwc2_readl(hsotg, GHWCFG2));
822 addr = hsotg->regs + GHWCFG3;
823 dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n",
824 (unsigned long)addr, dwc2_readl(hsotg, GHWCFG3));
825 addr = hsotg->regs + GHWCFG4;
826 dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n",
827 (unsigned long)addr, dwc2_readl(hsotg, GHWCFG4));
828 addr = hsotg->regs + GLPMCFG;
829 dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n",
830 (unsigned long)addr, dwc2_readl(hsotg, GLPMCFG));
831 addr = hsotg->regs + GPWRDN;
832 dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n",
833 (unsigned long)addr, dwc2_readl(hsotg, GPWRDN));
834 addr = hsotg->regs + GDFIFOCFG;
835 dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n",
836 (unsigned long)addr, dwc2_readl(hsotg, GDFIFOCFG));
837 addr = hsotg->regs + HPTXFSIZ;
838 dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n",
839 (unsigned long)addr, dwc2_readl(hsotg, HPTXFSIZ));
840
841 addr = hsotg->regs + PCGCTL;
842 dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n",
843 (unsigned long)addr, dwc2_readl(hsotg, PCGCTL));
844#endif
845}
846
847/**
848 * dwc2_flush_tx_fifo() - Flushes a Tx FIFO
849 *
850 * @hsotg: Programming view of DWC_otg controller
851 * @num: Tx FIFO to flush
852 */
853void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num)
854{
855 u32 greset;
856
857 dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num);
858
859 /* Wait for AHB master IDLE state */
860 if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
861 dev_warn(hsotg->dev, "%s: HANG! AHB Idle GRSCTL\n",
862 __func__);
863
864 greset = GRSTCTL_TXFFLSH;
865 greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
866 dwc2_writel(hsotg, greset, GRSTCTL);
867
868 if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000))
869 dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n",
870 __func__);
871
872 /* Wait for at least 3 PHY Clocks */
873 udelay(1);
874}
875
876/**
877 * dwc2_flush_rx_fifo() - Flushes the Rx FIFO
878 *
879 * @hsotg: Programming view of DWC_otg controller
880 */
881void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
882{
883 u32 greset;
884
885 dev_vdbg(hsotg->dev, "%s()\n", __func__);
886
887 /* Wait for AHB master IDLE state */
888 if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
889 dev_warn(hsotg->dev, "%s: HANG! AHB Idle GRSCTL\n",
890 __func__);
891
892 greset = GRSTCTL_RXFFLSH;
893 dwc2_writel(hsotg, greset, GRSTCTL);
894
895 /* Wait for RxFIFO flush done */
896 if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000))
897 dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n",
898 __func__);
899
900 /* Wait for at least 3 PHY Clocks */
901 udelay(1);
902}
903
904bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
905{
906 if (dwc2_readl(hsotg, GSNPSID) == 0xffffffff)
907 return false;
908 else
909 return true;
910}
911
912/**
913 * dwc2_enable_global_interrupts() - Enables the controller's Global
914 * Interrupt in the AHB Config register
915 *
916 * @hsotg: Programming view of DWC_otg controller
917 */
918void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
919{
920 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
921
922 ahbcfg |= GAHBCFG_GLBL_INTR_EN;
923 dwc2_writel(hsotg, ahbcfg, GAHBCFG);
924}
925
926/**
927 * dwc2_disable_global_interrupts() - Disables the controller's Global
928 * Interrupt in the AHB Config register
929 *
930 * @hsotg: Programming view of DWC_otg controller
931 */
932void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
933{
934 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
935
936 ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
937 dwc2_writel(hsotg, ahbcfg, GAHBCFG);
938}
939
940/* Returns the controller's GHWCFG2.OTG_MODE. */
941unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg)
942{
943 u32 ghwcfg2 = dwc2_readl(hsotg, GHWCFG2);
944
945 return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
946 GHWCFG2_OP_MODE_SHIFT;
947}
948
949/* Returns true if the controller is capable of DRD. */
950bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
951{
952 unsigned int op_mode = dwc2_op_mode(hsotg);
953
954 return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
955 (op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
956 (op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
957}
958
959/* Returns true if the controller is host-only. */
960bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
961{
962 unsigned int op_mode = dwc2_op_mode(hsotg);
963
964 return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
965 (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
966}
967
968/* Returns true if the controller is device-only. */
969bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
970{
971 unsigned int op_mode = dwc2_op_mode(hsotg);
972
973 return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
974 (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
975}
976
977/**
978 * dwc2_hsotg_wait_bit_set - Waits for bit to be set.
979 * @hsotg: Programming view of DWC_otg controller.
980 * @offset: Register's offset where bit/bits must be set.
981 * @mask: Mask of the bit/bits which must be set.
982 * @timeout: Timeout to wait.
983 *
984 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
985 */
986int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
987 u32 timeout)
988{
989 u32 i;
990
991 for (i = 0; i < timeout; i++) {
992 if (dwc2_readl(hsotg, offset) & mask)
993 return 0;
994 udelay(1);
995 }
996
997 return -ETIMEDOUT;
998}
999
1000/**
1001 * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear.
1002 * @hsotg: Programming view of DWC_otg controller.
1003 * @offset: Register's offset where bit/bits must be set.
1004 * @mask: Mask of the bit/bits which must be set.
1005 * @timeout: Timeout to wait.
1006 *
1007 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
1008 */
1009int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
1010 u32 timeout)
1011{
1012 u32 i;
1013
1014 for (i = 0; i < timeout; i++) {
1015 if (!(dwc2_readl(hsotg, offset) & mask))
1016 return 0;
1017 udelay(1);
1018 }
1019
1020 return -ETIMEDOUT;
1021}
1022
1023/*
1024 * Initializes the FSLSPClkSel field of the HCFG register depending on the
1025 * PHY type
1026 */
1027void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
1028{
1029 u32 hcfg, val;
1030
1031 if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
1032 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
1033 hsotg->params.ulpi_fs_ls) ||
1034 hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
1035 /* Full speed PHY */
1036 val = HCFG_FSLSPCLKSEL_48_MHZ;
1037 } else {
1038 /* High speed PHY running at full speed or high speed */
1039 val = HCFG_FSLSPCLKSEL_30_60_MHZ;
1040 }
1041
1042 dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
1043 hcfg = dwc2_readl(hsotg, HCFG);
1044 hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
1045 hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
1046 dwc2_writel(hsotg, hcfg, HCFG);
1047}
1048
1049static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1050{
1051 u32 usbcfg, ggpio, i2cctl;
1052 int retval = 0;
1053
1054 /*
1055 * core_init() is now called on every switch so only call the
1056 * following for the first time through
1057 */
1058 if (select_phy) {
1059 dev_dbg(hsotg->dev, "FS PHY selected\n");
1060
1061 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1062 if (!(usbcfg & GUSBCFG_PHYSEL)) {
1063 usbcfg |= GUSBCFG_PHYSEL;
1064 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1065
1066 /* Reset after a PHY select */
1067 retval = dwc2_core_reset(hsotg, false);
1068
1069 if (retval) {
1070 dev_err(hsotg->dev,
1071 "%s: Reset failed, aborting", __func__);
1072 return retval;
1073 }
1074 }
1075
1076 if (hsotg->params.activate_stm_fs_transceiver) {
1077 ggpio = dwc2_readl(hsotg, GGPIO);
1078 if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
1079 dev_dbg(hsotg->dev, "Activating transceiver\n");
1080 /*
1081 * STM32F4x9 uses the GGPIO register as general
1082 * core configuration register.
1083 */
1084 ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
1085 dwc2_writel(hsotg, ggpio, GGPIO);
1086 }
1087 }
1088 }
1089
1090 /*
1091 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
1092 * do this on HNP Dev/Host mode switches (done in dev_init and
1093 * host_init).
1094 */
1095 if (dwc2_is_host_mode(hsotg))
1096 dwc2_init_fs_ls_pclk_sel(hsotg);
1097
1098 if (hsotg->params.i2c_enable) {
1099 dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
1100
1101 /* Program GUSBCFG.OtgUtmiFsSel to I2C */
1102 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1103 usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
1104 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1105
1106 /* Program GI2CCTL.I2CEn */
1107 i2cctl = dwc2_readl(hsotg, GI2CCTL);
1108 i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
1109 i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
1110 i2cctl &= ~GI2CCTL_I2CEN;
1111 dwc2_writel(hsotg, i2cctl, GI2CCTL);
1112 i2cctl |= GI2CCTL_I2CEN;
1113 dwc2_writel(hsotg, i2cctl, GI2CCTL);
1114 }
1115
1116 return retval;
1117}
1118
1119static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1120{
1121 u32 usbcfg, usbcfg_old;
1122 int retval = 0;
1123
1124 if (!select_phy)
1125 return 0;
1126
1127 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1128 usbcfg_old = usbcfg;
1129
1130 /*
1131 * HS PHY parameters. These parameters are preserved during soft reset
1132 * so only program the first time. Do a soft reset immediately after
1133 * setting phyif.
1134 */
1135 switch (hsotg->params.phy_type) {
1136 case DWC2_PHY_TYPE_PARAM_ULPI:
1137 /* ULPI interface */
1138 dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
1139 usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
1140 usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
1141 if (hsotg->params.phy_ulpi_ddr)
1142 usbcfg |= GUSBCFG_DDRSEL;
1143
1144 /* Set external VBUS indicator as needed. */
1145 if (hsotg->params.oc_disable)
1146 usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
1147 GUSBCFG_INDICATORPASSTHROUGH);
1148 break;
1149 case DWC2_PHY_TYPE_PARAM_UTMI:
1150 /* UTMI+ interface */
1151 dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
1152 usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
1153 if (hsotg->params.phy_utmi_width == 16)
1154 usbcfg |= GUSBCFG_PHYIF16;
1155
1156 /* Set turnaround time */
1157 if (dwc2_is_device_mode(hsotg)) {
1158 usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
1159 if (hsotg->params.phy_utmi_width == 16)
1160 usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
1161 else
1162 usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
1163 }
1164 break;
1165 default:
1166 dev_err(hsotg->dev, "FS PHY selected at HS!\n");
1167 break;
1168 }
1169
1170 if (usbcfg != usbcfg_old) {
1171 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1172
1173 /* Reset after setting the PHY parameters */
1174 retval = dwc2_core_reset(hsotg, false);
1175 if (retval) {
1176 dev_err(hsotg->dev,
1177 "%s: Reset failed, aborting", __func__);
1178 return retval;
1179 }
1180 }
1181
1182 return retval;
1183}
1184
1185int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
1186{
1187 u32 usbcfg;
1188 int retval = 0;
1189
1190 if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
1191 hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
1192 hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
1193 /* If FS/LS mode with FS/LS PHY */
1194 retval = dwc2_fs_phy_init(hsotg, select_phy);
1195 if (retval)
1196 return retval;
1197 } else {
1198 /* High speed PHY */
1199 retval = dwc2_hs_phy_init(hsotg, select_phy);
1200 if (retval)
1201 return retval;
1202 }
1203
1204 if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
1205 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
1206 hsotg->params.ulpi_fs_ls) {
1207 dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
1208 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1209 usbcfg |= GUSBCFG_ULPI_FS_LS;
1210 usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
1211 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1212 } else {
1213 usbcfg = dwc2_readl(hsotg, GUSBCFG);
1214 usbcfg &= ~GUSBCFG_ULPI_FS_LS;
1215 usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
1216 dwc2_writel(hsotg, usbcfg, GUSBCFG);
1217 }
1218
1219 return retval;
1220}
1221
1222MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
1223MODULE_AUTHOR("Synopsys, Inc.");
1224MODULE_LICENSE("Dual BSD/GPL");