Linux Audio

Check our new training course

Loading...
v6.8
   1/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
   2/*
   3 * Copyright (C) 2005-2014, 2018-2023 Intel Corporation
   4 * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
   5 * Copyright (C) 2016-2017 Intel Deutschland GmbH
   6 */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   7#ifndef __iwl_trans_h__
   8#define __iwl_trans_h__
   9
  10#include <linux/ieee80211.h>
  11#include <linux/mm.h> /* for page_address */
  12#include <linux/lockdep.h>
  13#include <linux/kernel.h>
  14
  15#include "iwl-debug.h"
  16#include "iwl-config.h"
  17#include "fw/img.h"
  18#include "iwl-op-mode.h"
  19#include <linux/firmware.h>
  20#include "fw/api/cmdhdr.h"
  21#include "fw/api/txq.h"
  22#include "fw/api/dbg-tlv.h"
  23#include "iwl-dbg-tlv.h"
  24
  25/**
  26 * DOC: Transport layer - what is it ?
  27 *
  28 * The transport layer is the layer that deals with the HW directly. It provides
  29 * an abstraction of the underlying HW to the upper layer. The transport layer
  30 * doesn't provide any policy, algorithm or anything of this kind, but only
  31 * mechanisms to make the HW do something. It is not completely stateless but
  32 * close to it.
  33 * We will have an implementation for each different supported bus.
  34 */
  35
  36/**
  37 * DOC: Life cycle of the transport layer
  38 *
  39 * The transport layer has a very precise life cycle.
  40 *
  41 *	1) A helper function is called during the module initialization and
  42 *	   registers the bus driver's ops with the transport's alloc function.
  43 *	2) Bus's probe calls to the transport layer's allocation functions.
  44 *	   Of course this function is bus specific.
  45 *	3) This allocation functions will spawn the upper layer which will
  46 *	   register mac80211.
  47 *
  48 *	4) At some point (i.e. mac80211's start call), the op_mode will call
  49 *	   the following sequence:
  50 *	   start_hw
  51 *	   start_fw
  52 *
  53 *	5) Then when finished (or reset):
  54 *	   stop_device
  55 *
  56 *	6) Eventually, the free function will be called.
  57 */
  58
  59/* default preset 0 (start from bit 16)*/
  60#define IWL_FW_DBG_DOMAIN_POS	16
  61#define IWL_FW_DBG_DOMAIN	BIT(IWL_FW_DBG_DOMAIN_POS)
  62
  63#define IWL_TRANS_FW_DBG_DOMAIN(trans)	IWL_FW_INI_DOMAIN_ALWAYS_ON
  64
  65#define FH_RSCSR_FRAME_SIZE_MSK		0x00003FFF	/* bits 0-13 */
  66#define FH_RSCSR_FRAME_INVALID		0x55550000
  67#define FH_RSCSR_FRAME_ALIGN		0x40
  68#define FH_RSCSR_RPA_EN			BIT(25)
  69#define FH_RSCSR_RADA_EN		BIT(26)
  70#define FH_RSCSR_RXQ_POS		16
  71#define FH_RSCSR_RXQ_MASK		0x3F0000
  72
  73struct iwl_rx_packet {
  74	/*
  75	 * The first 4 bytes of the RX frame header contain both the RX frame
  76	 * size and some flags.
  77	 * Bit fields:
  78	 * 31:    flag flush RB request
  79	 * 30:    flag ignore TC (terminal counter) request
  80	 * 29:    flag fast IRQ request
  81	 * 28-27: Reserved
  82	 * 26:    RADA enabled
  83	 * 25:    Offload enabled
  84	 * 24:    RPF enabled
  85	 * 23:    RSS enabled
  86	 * 22:    Checksum enabled
  87	 * 21-16: RX queue
  88	 * 15-14: Reserved
  89	 * 13-00: RX frame size
  90	 */
  91	__le32 len_n_flags;
  92	struct iwl_cmd_header hdr;
  93	u8 data[];
  94} __packed;
  95
  96static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt)
  97{
  98	return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
  99}
 100
 101static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
 102{
 103	return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr);
 104}
 105
 106/**
 107 * enum CMD_MODE - how to send the host commands ?
 108 *
 109 * @CMD_ASYNC: Return right away and don't wait for the response
 110 * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
 111 *	the response. The caller needs to call iwl_free_resp when done.
 112 * @CMD_SEND_IN_RFKILL: Send the command even if the NIC is in RF-kill.
 113 * @CMD_BLOCK_TXQS: Block TXQs while the comment is executing.
 114 * @CMD_SEND_IN_D3: Allow the command to be sent in D3 mode, relevant to
 115 *	SUSPEND and RESUME commands. We are in D3 mode when we set
 116 *	trans->system_pm_mode to IWL_PLAT_PM_MODE_D3.
 
 
 
 
 117 */
 118enum CMD_MODE {
 119	CMD_ASYNC		= BIT(0),
 120	CMD_WANT_SKB		= BIT(1),
 121	CMD_SEND_IN_RFKILL	= BIT(2),
 122	CMD_BLOCK_TXQS		= BIT(3),
 123	CMD_SEND_IN_D3          = BIT(4),
 
 
 
 124};
 125
 126#define DEF_CMD_PAYLOAD_SIZE 320
 127
 128/**
 129 * struct iwl_device_cmd
 130 *
 131 * For allocation of the command and tx queues, this establishes the overall
 132 * size of the largest command we send to uCode, except for commands that
 133 * aren't fully copied and use other TFD space.
 134 */
 135struct iwl_device_cmd {
 136	union {
 137		struct {
 138			struct iwl_cmd_header hdr;	/* uCode API */
 139			u8 payload[DEF_CMD_PAYLOAD_SIZE];
 140		};
 141		struct {
 142			struct iwl_cmd_header_wide hdr_wide;
 143			u8 payload_wide[DEF_CMD_PAYLOAD_SIZE -
 144					sizeof(struct iwl_cmd_header_wide) +
 145					sizeof(struct iwl_cmd_header)];
 146		};
 147	};
 148} __packed;
 149
 150/**
 151 * struct iwl_device_tx_cmd - buffer for TX command
 152 * @hdr: the header
 153 * @payload: the payload placeholder
 154 *
 155 * The actual structure is sized dynamically according to need.
 156 */
 157struct iwl_device_tx_cmd {
 158	struct iwl_cmd_header hdr;
 159	u8 payload[];
 160} __packed;
 161
 162#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
 163
 164/*
 165 * number of transfer buffers (fragments) per transmit frame descriptor;
 166 * this is just the driver's idea, the hardware supports 20
 167 */
 168#define IWL_MAX_CMD_TBS_PER_TFD	2
 169
 170/* We need 2 entries for the TX command and header, and another one might
 171 * be needed for potential data in the SKB's head. The remaining ones can
 172 * be used for frags.
 173 */
 174#define IWL_TRANS_MAX_FRAGS(trans) ((trans)->txqs.tfd.max_tbs - 3)
 175
 176/**
 177 * enum iwl_hcmd_dataflag - flag for each one of the chunks of the command
 178 *
 179 * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
 180 *	ring. The transport layer doesn't map the command's buffer to DMA, but
 181 *	rather copies it to a previously allocated DMA buffer. This flag tells
 182 *	the transport layer not to copy the command, but to map the existing
 183 *	buffer (that is passed in) instead. This saves the memcpy and allows
 184 *	commands that are bigger than the fixed buffer to be submitted.
 185 *	Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
 186 * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
 187 *	chunk internally and free it again after the command completes. This
 188 *	can (currently) be used only once per command.
 189 *	Note that a TFD entry after a DUP one cannot be a normal copied one.
 190 */
 191enum iwl_hcmd_dataflag {
 192	IWL_HCMD_DFL_NOCOPY	= BIT(0),
 193	IWL_HCMD_DFL_DUP	= BIT(1),
 194};
 195
 196enum iwl_error_event_table_status {
 197	IWL_ERROR_EVENT_TABLE_LMAC1 = BIT(0),
 198	IWL_ERROR_EVENT_TABLE_LMAC2 = BIT(1),
 199	IWL_ERROR_EVENT_TABLE_UMAC = BIT(2),
 200	IWL_ERROR_EVENT_TABLE_TCM1 = BIT(3),
 201	IWL_ERROR_EVENT_TABLE_TCM2 = BIT(4),
 202	IWL_ERROR_EVENT_TABLE_RCM1 = BIT(5),
 203	IWL_ERROR_EVENT_TABLE_RCM2 = BIT(6),
 204};
 205
 206/**
 207 * struct iwl_host_cmd - Host command to the uCode
 208 *
 209 * @data: array of chunks that composes the data of the host command
 210 * @resp_pkt: response packet, if %CMD_WANT_SKB was set
 211 * @_rx_page_order: (internally used to free response packet)
 212 * @_rx_page_addr: (internally used to free response packet)
 213 * @flags: can be CMD_*
 214 * @len: array of the lengths of the chunks in data
 215 * @dataflags: IWL_HCMD_DFL_*
 216 * @id: command id of the host command, for wide commands encoding the
 217 *	version and group as well
 218 */
 219struct iwl_host_cmd {
 220	const void *data[IWL_MAX_CMD_TBS_PER_TFD];
 221	struct iwl_rx_packet *resp_pkt;
 222	unsigned long _rx_page_addr;
 223	u32 _rx_page_order;
 224
 225	u32 flags;
 226	u32 id;
 227	u16 len[IWL_MAX_CMD_TBS_PER_TFD];
 228	u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
 229};
 230
 231static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
 232{
 233	free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
 234}
 235
 236struct iwl_rx_cmd_buffer {
 237	struct page *_page;
 238	int _offset;
 239	bool _page_stolen;
 240	u32 _rx_page_order;
 241	unsigned int truesize;
 242};
 243
 244static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
 245{
 246	return (void *)((unsigned long)page_address(r->_page) + r->_offset);
 247}
 248
 249static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
 250{
 251	return r->_offset;
 252}
 253
 254static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
 255{
 256	r->_page_stolen = true;
 257	get_page(r->_page);
 258	return r->_page;
 259}
 260
 261static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
 262{
 263	__free_pages(r->_page, r->_rx_page_order);
 264}
 265
 266#define MAX_NO_RECLAIM_CMDS	6
 267
 268#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
 269
 270/*
 271 * Maximum number of HW queues the transport layer
 272 * currently supports
 273 */
 274#define IWL_MAX_HW_QUEUES		32
 275#define IWL_MAX_TVQM_QUEUES		512
 276
 277#define IWL_MAX_TID_COUNT	8
 278#define IWL_MGMT_TID		15
 279#define IWL_FRAME_LIMIT	64
 280#define IWL_MAX_RX_HW_QUEUES	16
 281#define IWL_9000_MAX_RX_HW_QUEUES	1
 282
 283/**
 284 * enum iwl_wowlan_status - WoWLAN image/device status
 285 * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
 286 * @IWL_D3_STATUS_RESET: device was reset while suspended
 287 */
 288enum iwl_d3_status {
 289	IWL_D3_STATUS_ALIVE,
 290	IWL_D3_STATUS_RESET,
 291};
 292
 293/**
 294 * enum iwl_trans_status: transport status flags
 295 * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
 296 * @STATUS_DEVICE_ENABLED: APM is enabled
 297 * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
 298 * @STATUS_INT_ENABLED: interrupts are enabled
 299 * @STATUS_RFKILL_HW: the actual HW state of the RF-kill switch
 300 * @STATUS_RFKILL_OPMODE: RF-kill state reported to opmode
 301 * @STATUS_FW_ERROR: the fw is in error state
 302 * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
 303 *	are sent
 304 * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
 305 * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation
 306 * @STATUS_SUPPRESS_CMD_ERROR_ONCE: suppress "FW error in SYNC CMD" once,
 307 *	e.g. for testing
 308 */
 309enum iwl_trans_status {
 310	STATUS_SYNC_HCMD_ACTIVE,
 311	STATUS_DEVICE_ENABLED,
 312	STATUS_TPOWER_PMI,
 313	STATUS_INT_ENABLED,
 314	STATUS_RFKILL_HW,
 315	STATUS_RFKILL_OPMODE,
 316	STATUS_FW_ERROR,
 317	STATUS_TRANS_GOING_IDLE,
 318	STATUS_TRANS_IDLE,
 319	STATUS_TRANS_DEAD,
 320	STATUS_SUPPRESS_CMD_ERROR_ONCE,
 321};
 322
 323static inline int
 324iwl_trans_get_rb_size_order(enum iwl_amsdu_size rb_size)
 325{
 326	switch (rb_size) {
 327	case IWL_AMSDU_2K:
 328		return get_order(2 * 1024);
 329	case IWL_AMSDU_4K:
 330		return get_order(4 * 1024);
 331	case IWL_AMSDU_8K:
 332		return get_order(8 * 1024);
 333	case IWL_AMSDU_12K:
 334		return get_order(16 * 1024);
 335	default:
 336		WARN_ON(1);
 337		return -1;
 338	}
 339}
 340
 341static inline int
 342iwl_trans_get_rb_size(enum iwl_amsdu_size rb_size)
 343{
 344	switch (rb_size) {
 345	case IWL_AMSDU_2K:
 346		return 2 * 1024;
 347	case IWL_AMSDU_4K:
 348		return 4 * 1024;
 349	case IWL_AMSDU_8K:
 350		return 8 * 1024;
 351	case IWL_AMSDU_12K:
 352		return 16 * 1024;
 353	default:
 354		WARN_ON(1);
 355		return 0;
 356	}
 357}
 358
 359struct iwl_hcmd_names {
 360	u8 cmd_id;
 361	const char *const cmd_name;
 362};
 363
 364#define HCMD_NAME(x)	\
 365	{ .cmd_id = x, .cmd_name = #x }
 366
 367struct iwl_hcmd_arr {
 368	const struct iwl_hcmd_names *arr;
 369	int size;
 370};
 371
 372#define HCMD_ARR(x)	\
 373	{ .arr = x, .size = ARRAY_SIZE(x) }
 374
 375/**
 376 * struct iwl_dump_sanitize_ops - dump sanitization operations
 377 * @frob_txf: Scrub the TX FIFO data
 378 * @frob_hcmd: Scrub a host command, the %hcmd pointer is to the header
 379 *	but that might be short or long (&struct iwl_cmd_header or
 380 *	&struct iwl_cmd_header_wide)
 381 * @frob_mem: Scrub memory data
 382 */
 383struct iwl_dump_sanitize_ops {
 384	void (*frob_txf)(void *ctx, void *buf, size_t buflen);
 385	void (*frob_hcmd)(void *ctx, void *hcmd, size_t buflen);
 386	void (*frob_mem)(void *ctx, u32 mem_addr, void *mem, size_t buflen);
 387};
 388
 389/**
 390 * struct iwl_trans_config - transport configuration
 391 *
 392 * @op_mode: pointer to the upper layer.
 393 * @cmd_queue: the index of the command queue.
 394 *	Must be set before start_fw.
 395 * @cmd_fifo: the fifo for host commands
 396 * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue.
 397 * @no_reclaim_cmds: Some devices erroneously don't set the
 398 *	SEQ_RX_FRAME bit on some notifications, this is the
 399 *	list of such notifications to filter. Max length is
 400 *	%MAX_NO_RECLAIM_CMDS.
 401 * @n_no_reclaim_cmds: # of commands in list
 402 * @rx_buf_size: RX buffer size needed for A-MSDUs
 403 *	if unset 4k will be the RX buffer size
 404 * @bc_table_dword: set to true if the BC table expects the byte count to be
 405 *	in DWORD (as opposed to bytes)
 406 * @scd_set_active: should the transport configure the SCD for HCMD queue
 
 407 * @command_groups: array of command groups, each member is an array of the
 408 *	commands in the group; for debugging only
 409 * @command_groups_size: number of command groups, to avoid illegal access
 410 * @cb_data_offs: offset inside skb->cb to store transport data at, must have
 411 *	space for at least two pointers
 412 * @fw_reset_handshake: firmware supports reset flow handshake
 413 * @queue_alloc_cmd_ver: queue allocation command version, set to 0
 414 *	for using the older SCD_QUEUE_CFG, set to the version of
 415 *	SCD_QUEUE_CONFIG_CMD otherwise.
 416 */
 417struct iwl_trans_config {
 418	struct iwl_op_mode *op_mode;
 419
 420	u8 cmd_queue;
 421	u8 cmd_fifo;
 422	unsigned int cmd_q_wdg_timeout;
 423	const u8 *no_reclaim_cmds;
 424	unsigned int n_no_reclaim_cmds;
 425
 426	enum iwl_amsdu_size rx_buf_size;
 427	bool bc_table_dword;
 428	bool scd_set_active;
 
 429	const struct iwl_hcmd_arr *command_groups;
 430	int command_groups_size;
 431
 432	u8 cb_data_offs;
 433	bool fw_reset_handshake;
 434	u8 queue_alloc_cmd_ver;
 435};
 436
 437struct iwl_trans_dump_data {
 438	u32 len;
 439	u8 data[];
 440};
 441
 442struct iwl_trans;
 443
 444struct iwl_trans_txq_scd_cfg {
 445	u8 fifo;
 446	u8 sta_id;
 447	u8 tid;
 448	bool aggregate;
 449	int frame_limit;
 450};
 451
 452/**
 453 * struct iwl_trans_rxq_dma_data - RX queue DMA data
 454 * @fr_bd_cb: DMA address of free BD cyclic buffer
 455 * @fr_bd_wid: Initial write index of the free BD cyclic buffer
 456 * @urbd_stts_wrptr: DMA address of urbd_stts_wrptr
 457 * @ur_bd_cb: DMA address of used BD cyclic buffer
 458 */
 459struct iwl_trans_rxq_dma_data {
 460	u64 fr_bd_cb;
 461	u32 fr_bd_wid;
 462	u64 urbd_stts_wrptr;
 463	u64 ur_bd_cb;
 464};
 465
 466/* maximal number of DRAM MAP entries supported by FW */
 467#define IPC_DRAM_MAP_ENTRY_NUM_MAX 64
 468
 469/**
 470 * struct iwl_pnvm_image - contains info about the parsed pnvm image
 471 * @chunks: array of pointers to pnvm payloads and their sizes
 472 * @n_chunks: the number of the pnvm payloads.
 473 * @version: the version of the loaded PNVM image
 474 */
 475struct iwl_pnvm_image {
 476	struct {
 477		const void *data;
 478		u32 len;
 479	} chunks[IPC_DRAM_MAP_ENTRY_NUM_MAX];
 480	u32 n_chunks;
 481	u32 version;
 482};
 483
 484/**
 485 * struct iwl_trans_ops - transport specific operations
 486 *
 487 * All the handlers MUST be implemented
 488 *
 489 * @start_hw: starts the HW. From that point on, the HW can send interrupts.
 490 *	May sleep.
 
 491 * @op_mode_leave: Turn off the HW RF kill indication if on
 492 *	May sleep
 493 * @start_fw: allocates and inits all the resources for the transport
 494 *	layer. Also kick a fw image.
 495 *	May sleep
 496 * @fw_alive: called when the fw sends alive notification. If the fw provides
 497 *	the SCD base address in SRAM, then provide it here, or 0 otherwise.
 498 *	May sleep
 499 * @stop_device: stops the whole device (embedded CPU put to reset) and stops
 500 *	the HW. From that point on, the HW will be stopped but will still issue
 501 *	an interrupt if the HW RF kill switch is triggered.
 
 502 *	This callback must do the right thing and not crash even if %start_hw()
 503 *	was called but not &start_fw(). May sleep.
 504 * @d3_suspend: put the device into the correct mode for WoWLAN during
 505 *	suspend. This is optional, if not implemented WoWLAN will not be
 506 *	supported. This callback may sleep.
 507 * @d3_resume: resume the device after WoWLAN, enabling the opmode to
 508 *	talk to the WoWLAN image to get its status. This is optional, if not
 509 *	implemented WoWLAN will not be supported. This callback may sleep.
 510 * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
 511 *	If RFkill is asserted in the middle of a SYNC host command, it must
 512 *	return -ERFKILL straight away.
 513 *	May sleep only if CMD_ASYNC is not set
 514 * @tx: send an skb. The transport relies on the op_mode to zero the
 515 *	the ieee80211_tx_info->driver_data. If the MPDU is an A-MSDU, all
 516 *	the CSUM will be taken care of (TCP CSUM and IP header in case of
 517 *	IPv4). If the MPDU is a single MSDU, the op_mode must compute the IP
 518 *	header if it is IPv4.
 519 *	Must be atomic
 520 * @reclaim: free packet until ssn. Returns a list of freed packets.
 521 *	Must be atomic
 522 * @txq_enable: setup a queue. To setup an AC queue, use the
 523 *	iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
 524 *	this one. The op_mode must not configure the HCMD queue. The scheduler
 525 *	configuration may be %NULL, in which case the hardware will not be
 526 *	configured. If true is returned, the operation mode needs to increment
 527 *	the sequence number of the packets routed to this queue because of a
 528 *	hardware scheduler bug. May sleep.
 529 * @txq_disable: de-configure a Tx queue to send AMPDUs
 530 *	Must be atomic
 531 * @txq_set_shared_mode: change Tx queue shared/unshared marking
 532 * @wait_tx_queues_empty: wait until tx queues are empty. May sleep.
 533 * @wait_txq_empty: wait until specific tx queue is empty. May sleep.
 534 * @freeze_txq_timer: prevents the timer of the queue from firing until the
 535 *	queue is set to awake. Must be atomic.
 
 
 
 
 
 536 * @write8: write a u8 to a register at offset ofs from the BAR
 537 * @write32: write a u32 to a register at offset ofs from the BAR
 538 * @read32: read a u32 register at offset ofs from the BAR
 539 * @read_prph: read a DWORD from a periphery register
 540 * @write_prph: write a DWORD to a periphery register
 541 * @read_mem: read device's SRAM in DWORD
 542 * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
 543 *	will be zeroed.
 544 * @read_config32: read a u32 value from the device's config space at
 545 *	the given offset.
 546 * @configure: configure parameters required by the transport layer from
 547 *	the op_mode. May be called several times before start_fw, can't be
 548 *	called after that.
 549 * @set_pmi: set the power pmi state
 550 * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
 551 *	Sleeping is not allowed between grab_nic_access and
 552 *	release_nic_access.
 553 * @release_nic_access: let the NIC go to sleep. The "flags" parameter
 554 *	must be the same one that was sent before to the grab_nic_access.
 555 * @set_bits_mask - set SRAM register according to value and mask.
 
 
 
 
 
 556 * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last
 557 *	TX'ed commands and similar. The buffer will be vfree'd by the caller.
 558 *	Note that the transport must fill in the proper file headers.
 559 * @debugfs_cleanup: used in the driver unload flow to make a proper cleanup
 560 *	of the trans debugfs
 561 * @load_pnvm: save the pnvm data in DRAM
 562 * @set_pnvm: set the pnvm data in the prph scratch buffer, inside the
 563 *	context info.
 564 * @load_reduce_power: copy reduce power table to the corresponding DRAM memory
 565 * @set_reduce_power: set reduce power table addresses in the sratch buffer
 566 * @interrupts: disable/enable interrupts to transport
 567 */
 568struct iwl_trans_ops {
 569
 570	int (*start_hw)(struct iwl_trans *iwl_trans);
 571	void (*op_mode_leave)(struct iwl_trans *iwl_trans);
 572	int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
 573			bool run_in_rfkill);
 574	void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
 575	void (*stop_device)(struct iwl_trans *trans);
 576
 577	int (*d3_suspend)(struct iwl_trans *trans, bool test, bool reset);
 578	int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
 579			 bool test, bool reset);
 580
 581	int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
 582
 583	int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
 584		  struct iwl_device_tx_cmd *dev_cmd, int queue);
 585	void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
 586			struct sk_buff_head *skbs, bool is_flush);
 587
 588	void (*set_q_ptrs)(struct iwl_trans *trans, int queue, int ptr);
 589
 590	bool (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
 591			   const struct iwl_trans_txq_scd_cfg *cfg,
 592			   unsigned int queue_wdg_timeout);
 593	void (*txq_disable)(struct iwl_trans *trans, int queue,
 594			    bool configure_scd);
 595	/* 22000 functions */
 596	int (*txq_alloc)(struct iwl_trans *trans, u32 flags,
 597			 u32 sta_mask, u8 tid,
 598			 int size, unsigned int queue_wdg_timeout);
 
 599	void (*txq_free)(struct iwl_trans *trans, int queue);
 600	int (*rxq_dma_data)(struct iwl_trans *trans, int queue,
 601			    struct iwl_trans_rxq_dma_data *data);
 602
 603	void (*txq_set_shared_mode)(struct iwl_trans *trans, u32 txq_id,
 604				    bool shared);
 605
 606	int (*wait_tx_queues_empty)(struct iwl_trans *trans, u32 txq_bm);
 607	int (*wait_txq_empty)(struct iwl_trans *trans, int queue);
 608	void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs,
 609				 bool freeze);
 
 610
 611	void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
 612	void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
 613	u32 (*read32)(struct iwl_trans *trans, u32 ofs);
 614	u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
 615	void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
 616	int (*read_mem)(struct iwl_trans *trans, u32 addr,
 617			void *buf, int dwords);
 618	int (*write_mem)(struct iwl_trans *trans, u32 addr,
 619			 const void *buf, int dwords);
 620	int (*read_config32)(struct iwl_trans *trans, u32 ofs, u32 *val);
 621	void (*configure)(struct iwl_trans *trans,
 622			  const struct iwl_trans_config *trans_cfg);
 623	void (*set_pmi)(struct iwl_trans *trans, bool state);
 624	int (*sw_reset)(struct iwl_trans *trans, bool retake_ownership);
 625	bool (*grab_nic_access)(struct iwl_trans *trans);
 626	void (*release_nic_access)(struct iwl_trans *trans);
 
 627	void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
 628			      u32 value);
 
 
 
 
 629
 630	struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans,
 631						 u32 dump_mask,
 632						 const struct iwl_dump_sanitize_ops *sanitize_ops,
 633						 void *sanitize_ctx);
 634	void (*debugfs_cleanup)(struct iwl_trans *trans);
 635	void (*sync_nmi)(struct iwl_trans *trans);
 636	int (*load_pnvm)(struct iwl_trans *trans,
 637			 const struct iwl_pnvm_image *pnvm_payloads,
 638			 const struct iwl_ucode_capabilities *capa);
 639	void (*set_pnvm)(struct iwl_trans *trans,
 640			 const struct iwl_ucode_capabilities *capa);
 641	int (*load_reduce_power)(struct iwl_trans *trans,
 642				 const struct iwl_pnvm_image *payloads,
 643				 const struct iwl_ucode_capabilities *capa);
 644	void (*set_reduce_power)(struct iwl_trans *trans,
 645				 const struct iwl_ucode_capabilities *capa);
 646
 647	void (*interrupts)(struct iwl_trans *trans, bool enable);
 648	int (*imr_dma_data)(struct iwl_trans *trans,
 649			    u32 dst_addr, u64 src_addr,
 650			    u32 byte_cnt);
 651
 
 652};
 653
 654/**
 655 * enum iwl_trans_state - state of the transport layer
 656 *
 657 * @IWL_TRANS_NO_FW: firmware wasn't started yet, or crashed
 658 * @IWL_TRANS_FW_STARTED: FW was started, but not alive yet
 659 * @IWL_TRANS_FW_ALIVE: FW has sent an alive response
 660 */
 661enum iwl_trans_state {
 662	IWL_TRANS_NO_FW,
 663	IWL_TRANS_FW_STARTED,
 664	IWL_TRANS_FW_ALIVE,
 665};
 666
 667/**
 668 * DOC: Platform power management
 669 *
 
 
 
 670 * In system-wide power management the entire platform goes into a low
 671 * power state (e.g. idle or suspend to RAM) at the same time and the
 672 * device is configured as a wakeup source for the entire platform.
 673 * This is usually triggered by userspace activity (e.g. the user
 674 * presses the suspend button or a power management daemon decides to
 675 * put the platform in low power mode).  The device's behavior in this
 676 * mode is dictated by the wake-on-WLAN configuration.
 677 *
 
 
 
 
 
 
 
 678 * The terms used for the device's behavior are as follows:
 679 *
 680 *	- D0: the device is fully powered and the host is awake;
 681 *	- D3: the device is in low power mode and only reacts to
 682 *		specific events (e.g. magic-packet received or scan
 683 *		results found);
 
 
 684 *
 685 * These terms reflect the power modes in the firmware and are not to
 686 * be confused with the physical device power state.
 
 687 */
 688
 689/**
 690 * enum iwl_plat_pm_mode - platform power management mode
 691 *
 692 * This enumeration describes the device's platform power management
 693 * behavior when in system-wide suspend (i.e WoWLAN).
 
 694 *
 695 * @IWL_PLAT_PM_MODE_DISABLED: power management is disabled for this
 696 *	device.  In system-wide suspend mode, it means that the all
 697 *	connections will be closed automatically by mac80211 before
 698 *	the platform is suspended.
 
 699 * @IWL_PLAT_PM_MODE_D3: the device goes into D3 mode (i.e. WoWLAN).
 
 
 
 700 */
 701enum iwl_plat_pm_mode {
 702	IWL_PLAT_PM_MODE_DISABLED,
 703	IWL_PLAT_PM_MODE_D3,
 
 704};
 705
 706/**
 707 * enum iwl_ini_cfg_state
 708 * @IWL_INI_CFG_STATE_NOT_LOADED: no debug cfg was given
 709 * @IWL_INI_CFG_STATE_LOADED: debug cfg was found and loaded
 710 * @IWL_INI_CFG_STATE_CORRUPTED: debug cfg was found and some of the TLVs
 711 *	are corrupted. The rest of the debug TLVs will still be used
 712 */
 713enum iwl_ini_cfg_state {
 714	IWL_INI_CFG_STATE_NOT_LOADED,
 715	IWL_INI_CFG_STATE_LOADED,
 716	IWL_INI_CFG_STATE_CORRUPTED,
 717};
 718
 719/* Max time to wait for nmi interrupt */
 720#define IWL_TRANS_NMI_TIMEOUT (HZ / 4)
 721
 722/**
 723 * struct iwl_dram_data
 724 * @physical: page phy pointer
 725 * @block: pointer to the allocated block/page
 726 * @size: size of the block/page
 727 */
 728struct iwl_dram_data {
 729	dma_addr_t physical;
 730	void *block;
 731	int size;
 732};
 733
 734/**
 735 * struct iwl_dram_regions - DRAM regions container structure
 736 * @drams: array of several DRAM areas that contains the pnvm and power
 737 *	reduction table payloads.
 738 * @n_regions: number of DRAM regions that were allocated
 739 * @prph_scratch_mem_desc: points to a structure allocated in dram,
 740 *	designed to show FW where all the payloads are.
 741 */
 742struct iwl_dram_regions {
 743	struct iwl_dram_data drams[IPC_DRAM_MAP_ENTRY_NUM_MAX];
 744	struct iwl_dram_data prph_scratch_mem_desc;
 745	u8 n_regions;
 746};
 747
 748/**
 749 * struct iwl_fw_mon - fw monitor per allocation id
 750 * @num_frags: number of fragments
 751 * @frags: an array of DRAM buffer fragments
 752 */
 753struct iwl_fw_mon {
 754	u32 num_frags;
 755	struct iwl_dram_data *frags;
 756};
 757
 758/**
 759 * struct iwl_self_init_dram - dram data used by self init process
 760 * @fw: lmac and umac dram data
 761 * @fw_cnt: total number of items in array
 762 * @paging: paging dram data
 763 * @paging_cnt: total number of items in array
 764 */
 765struct iwl_self_init_dram {
 766	struct iwl_dram_data *fw;
 767	int fw_cnt;
 768	struct iwl_dram_data *paging;
 769	int paging_cnt;
 770};
 771
 772/**
 773 * struct iwl_imr_data - imr dram data used during debug process
 774 * @imr_enable: imr enable status received from fw
 775 * @imr_size: imr dram size received from fw
 776 * @sram_addr: sram address from debug tlv
 777 * @sram_size: sram size from debug tlv
 778 * @imr2sram_remainbyte`: size remained after each dma transfer
 779 * @imr_curr_addr: current dst address used during dma transfer
 780 * @imr_base_addr: imr address received from fw
 781 */
 782struct iwl_imr_data {
 783	u32 imr_enable;
 784	u32 imr_size;
 785	u32 sram_addr;
 786	u32 sram_size;
 787	u32 imr2sram_remainbyte;
 788	u64 imr_curr_addr;
 789	__le64 imr_base_addr;
 790};
 791
 792#define IWL_TRANS_CURRENT_PC_NAME_MAX_BYTES      32
 793
 794/**
 795 * struct iwl_pc_data - program counter details
 796 * @pc_name: cpu name
 797 * @pc_address: cpu program counter
 798 */
 799struct iwl_pc_data {
 800	u8  pc_name[IWL_TRANS_CURRENT_PC_NAME_MAX_BYTES];
 801	u32 pc_address;
 802};
 803
 804/**
 805 * struct iwl_trans_debug - transport debug related data
 806 *
 807 * @n_dest_reg: num of reg_ops in %dbg_dest_tlv
 808 * @rec_on: true iff there is a fw debug recording currently active
 809 * @dest_tlv: points to the destination TLV for debug
 810 * @conf_tlv: array of pointers to configuration TLVs for debug
 811 * @trigger_tlv: array of pointers to triggers TLVs for debug
 812 * @lmac_error_event_table: addrs of lmacs error tables
 813 * @umac_error_event_table: addr of umac error table
 814 * @tcm_error_event_table: address(es) of TCM error table(s)
 815 * @rcm_error_event_table: address(es) of RCM error table(s)
 816 * @error_event_table_tlv_status: bitmap that indicates what error table
 817 *	pointers was recevied via TLV. uses enum &iwl_error_event_table_status
 818 * @internal_ini_cfg: internal debug cfg state. Uses &enum iwl_ini_cfg_state
 819 * @external_ini_cfg: external debug cfg state. Uses &enum iwl_ini_cfg_state
 820 * @fw_mon_cfg: debug buffer allocation configuration
 821 * @fw_mon_ini: DRAM buffer fragments per allocation id
 822 * @fw_mon: DRAM buffer for firmware monitor
 823 * @hw_error: equals true if hw error interrupt was received from the FW
 824 * @ini_dest: debug monitor destination uses &enum iwl_fw_ini_buffer_location
 825 * @active_regions: active regions
 826 * @debug_info_tlv_list: list of debug info TLVs
 827 * @time_point: array of debug time points
 828 * @periodic_trig_list: periodic triggers list
 829 * @domains_bitmap: bitmap of active domains other than &IWL_FW_INI_DOMAIN_ALWAYS_ON
 830 * @ucode_preset: preset based on ucode
 831 * @dump_file_name_ext: dump file name extension
 832 * @dump_file_name_ext_valid: dump file name extension if valid or not
 833 * @num_pc: number of program counter for cpu
 834 * @pc_data: details of the program counter
 835 * @yoyo_bin_loaded: tells if a yoyo debug file has been loaded
 836 */
 837struct iwl_trans_debug {
 838	u8 n_dest_reg;
 839	bool rec_on;
 840
 841	const struct iwl_fw_dbg_dest_tlv_v1 *dest_tlv;
 842	const struct iwl_fw_dbg_conf_tlv *conf_tlv[FW_DBG_CONF_MAX];
 843	struct iwl_fw_dbg_trigger_tlv * const *trigger_tlv;
 844
 845	u32 lmac_error_event_table[2];
 846	u32 umac_error_event_table;
 847	u32 tcm_error_event_table[2];
 848	u32 rcm_error_event_table[2];
 849	unsigned int error_event_table_tlv_status;
 850
 851	enum iwl_ini_cfg_state internal_ini_cfg;
 852	enum iwl_ini_cfg_state external_ini_cfg;
 853
 854	struct iwl_fw_ini_allocation_tlv fw_mon_cfg[IWL_FW_INI_ALLOCATION_NUM];
 855	struct iwl_fw_mon fw_mon_ini[IWL_FW_INI_ALLOCATION_NUM];
 856
 857	struct iwl_dram_data fw_mon;
 858
 859	bool hw_error;
 860	enum iwl_fw_ini_buffer_location ini_dest;
 861
 862	u64 unsupported_region_msk;
 863	struct iwl_ucode_tlv *active_regions[IWL_FW_INI_MAX_REGION_ID];
 864	struct list_head debug_info_tlv_list;
 865	struct iwl_dbg_tlv_time_point_data time_point[IWL_FW_INI_TIME_POINT_NUM];
 866	struct list_head periodic_trig_list;
 867
 868	u32 domains_bitmap;
 869	u32 ucode_preset;
 870	bool restart_required;
 871	u32 last_tp_resetfw;
 872	struct iwl_imr_data imr_data;
 873	u8 dump_file_name_ext[IWL_FW_INI_MAX_NAME];
 874	bool dump_file_name_ext_valid;
 875	u32 num_pc;
 876	struct iwl_pc_data *pc_data;
 877	bool yoyo_bin_loaded;
 878};
 879
 880struct iwl_dma_ptr {
 881	dma_addr_t dma;
 882	void *addr;
 883	size_t size;
 884};
 885
 886struct iwl_cmd_meta {
 887	/* only for SYNC commands, iff the reply skb is wanted */
 888	struct iwl_host_cmd *source;
 889	u32 flags;
 890	u32 tbs;
 891};
 892
 893/*
 894 * The FH will write back to the first TB only, so we need to copy some data
 895 * into the buffer regardless of whether it should be mapped or not.
 896 * This indicates how big the first TB must be to include the scratch buffer
 897 * and the assigned PN.
 898 * Since PN location is 8 bytes at offset 12, it's 20 now.
 899 * If we make it bigger then allocations will be bigger and copy slower, so
 900 * that's probably not useful.
 901 */
 902#define IWL_FIRST_TB_SIZE	20
 903#define IWL_FIRST_TB_SIZE_ALIGN ALIGN(IWL_FIRST_TB_SIZE, 64)
 904
 905struct iwl_pcie_txq_entry {
 906	void *cmd;
 907	struct sk_buff *skb;
 908	/* buffer to free after command completes */
 909	const void *free_buf;
 910	struct iwl_cmd_meta meta;
 911};
 912
 913struct iwl_pcie_first_tb_buf {
 914	u8 buf[IWL_FIRST_TB_SIZE_ALIGN];
 915};
 916
 917/**
 918 * struct iwl_txq - Tx Queue for DMA
 919 * @tfds: transmit frame descriptors (DMA memory)
 920 * @first_tb_bufs: start of command headers, including scratch buffers, for
 921 *	the writeback -- this is DMA memory and an array holding one buffer
 922 *	for each command on the queue
 923 * @first_tb_dma: DMA address for the first_tb_bufs start
 924 * @entries: transmit entries (driver state)
 925 * @lock: queue lock
 926 * @stuck_timer: timer that fires if queue gets stuck
 927 * @trans: pointer back to transport (for timer)
 928 * @need_update: indicates need to update read/write index
 929 * @ampdu: true if this queue is an ampdu queue for an specific RA/TID
 930 * @wd_timeout: queue watchdog timeout (jiffies) - per queue
 931 * @frozen: tx stuck queue timer is frozen
 932 * @frozen_expiry_remainder: remember how long until the timer fires
 933 * @bc_tbl: byte count table of the queue (relevant only for gen2 transport)
 934 * @write_ptr: 1-st empty entry (index) host_w
 935 * @read_ptr: last used entry (index) host_r
 936 * @dma_addr:  physical addr for BD's
 937 * @n_window: safe queue window
 938 * @id: queue id
 939 * @low_mark: low watermark, resume queue if free space more than this
 940 * @high_mark: high watermark, stop queue if free space less than this
 941 *
 942 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
 943 * descriptors) and required locking structures.
 944 *
 945 * Note the difference between TFD_QUEUE_SIZE_MAX and n_window: the hardware
 946 * always assumes 256 descriptors, so TFD_QUEUE_SIZE_MAX is always 256 (unless
 947 * there might be HW changes in the future). For the normal TX
 948 * queues, n_window, which is the size of the software queue data
 949 * is also 256; however, for the command queue, n_window is only
 950 * 32 since we don't need so many commands pending. Since the HW
 951 * still uses 256 BDs for DMA though, TFD_QUEUE_SIZE_MAX stays 256.
 952 * This means that we end up with the following:
 953 *  HW entries: | 0 | ... | N * 32 | ... | N * 32 + 31 | ... | 255 |
 954 *  SW entries:           | 0      | ... | 31          |
 955 * where N is a number between 0 and 7. This means that the SW
 956 * data is a window overlayed over the HW queue.
 957 */
 958struct iwl_txq {
 959	void *tfds;
 960	struct iwl_pcie_first_tb_buf *first_tb_bufs;
 961	dma_addr_t first_tb_dma;
 962	struct iwl_pcie_txq_entry *entries;
 963	/* lock for syncing changes on the queue */
 964	spinlock_t lock;
 965	unsigned long frozen_expiry_remainder;
 966	struct timer_list stuck_timer;
 967	struct iwl_trans *trans;
 968	bool need_update;
 969	bool frozen;
 970	bool ampdu;
 971	int block;
 972	unsigned long wd_timeout;
 973	struct sk_buff_head overflow_q;
 974	struct iwl_dma_ptr bc_tbl;
 975
 976	int write_ptr;
 977	int read_ptr;
 978	dma_addr_t dma_addr;
 979	int n_window;
 980	u32 id;
 981	int low_mark;
 982	int high_mark;
 983
 984	bool overflow_tx;
 985};
 986
 987/**
 988 * struct iwl_trans_txqs - transport tx queues data
 989 *
 990 * @bc_table_dword: true if the BC table expects DWORD (as opposed to bytes)
 991 * @page_offs: offset from skb->cb to mac header page pointer
 992 * @dev_cmd_offs: offset from skb->cb to iwl_device_tx_cmd pointer
 993 * @queue_used - bit mask of used queues
 994 * @queue_stopped - bit mask of stopped queues
 995 * @scd_bc_tbls: gen1 pointer to the byte count table of the scheduler
 996 * @queue_alloc_cmd_ver: queue allocation command version
 997 */
 998struct iwl_trans_txqs {
 999	unsigned long queue_used[BITS_TO_LONGS(IWL_MAX_TVQM_QUEUES)];
1000	unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_TVQM_QUEUES)];
1001	struct iwl_txq *txq[IWL_MAX_TVQM_QUEUES];
1002	struct dma_pool *bc_pool;
1003	size_t bc_tbl_size;
1004	bool bc_table_dword;
1005	u8 page_offs;
1006	u8 dev_cmd_offs;
1007	struct iwl_tso_hdr_page __percpu *tso_hdr_page;
1008
1009	struct {
1010		u8 fifo;
1011		u8 q_id;
1012		unsigned int wdg_timeout;
1013	} cmd;
1014
1015	struct {
1016		u8 max_tbs;
1017		u16 size;
1018		u8 addr_size;
1019	} tfd;
1020
1021	struct iwl_dma_ptr scd_bc_tbls;
1022
1023	u8 queue_alloc_cmd_ver;
1024};
1025
1026/**
1027 * struct iwl_trans - transport common data
1028 *
1029 * @csme_own - true if we couldn't get ownership on the device
1030 * @ops - pointer to iwl_trans_ops
1031 * @op_mode - pointer to the op_mode
1032 * @trans_cfg: the trans-specific configuration part
1033 * @cfg - pointer to the configuration
1034 * @drv - pointer to iwl_drv
1035 * @status: a bit-mask of transport status flags
1036 * @dev - pointer to struct device * that represents the device
1037 * @max_skb_frags: maximum number of fragments an SKB can have when transmitted.
1038 *	0 indicates that frag SKBs (NETIF_F_SG) aren't supported.
1039 * @hw_rf_id a u32 with the device RF ID
1040 * @hw_crf_id a u32 with the device CRF ID
1041 * @hw_wfpm_id a u32 with the device wfpm ID
1042 * @hw_id: a u32 with the ID of the device / sub-device.
1043 *	Set during transport allocation.
1044 * @hw_id_str: a string with info about HW ID. Set during transport allocation.
1045 * @hw_rev_step: The mac step of the HW
1046 * @pm_support: set to true in start_hw if link pm is supported
1047 * @ltr_enabled: set to true if the LTR is enabled
1048 * @fail_to_parse_pnvm_image: set to true if pnvm parsing failed
1049 * @failed_to_load_reduce_power_image: set to true if pnvm loading failed
1050 * @wide_cmd_header: true when ucode supports wide command header format
1051 * @wait_command_queue: wait queue for sync commands
1052 * @num_rx_queues: number of RX queues allocated by the transport;
1053 *	the transport must set this before calling iwl_drv_start()
1054 * @iml_len: the length of the image loader
1055 * @iml: a pointer to the image loader itself
1056 * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
1057 *	The user should use iwl_trans_{alloc,free}_tx_cmd.
1058 * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
1059 *	starting the firmware, used for tracing
1060 * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
1061 *	start of the 802.11 header in the @rx_mpdu_cmd
 
 
 
 
 
1062 * @system_pm_mode: the system-wide power management mode in use.
1063 *	This mode is set dynamically, depending on the WoWLAN values
1064 *	configured from the userspace at runtime.
1065 * @txqs: transport tx queues data.
1066 * @mbx_addr_0_step: step address data 0
1067 * @mbx_addr_1_step: step address data 1
1068 * @pcie_link_speed: current PCIe link speed (%PCI_EXP_LNKSTA_CLS_*),
1069 *	only valid for discrete (not integrated) NICs
1070 * @invalid_tx_cmd: invalid TX command buffer
1071 */
1072struct iwl_trans {
1073	bool csme_own;
1074	const struct iwl_trans_ops *ops;
1075	struct iwl_op_mode *op_mode;
1076	const struct iwl_cfg_trans_params *trans_cfg;
1077	const struct iwl_cfg *cfg;
1078	struct iwl_drv *drv;
1079	enum iwl_trans_state state;
1080	unsigned long status;
1081
1082	struct device *dev;
1083	u32 max_skb_frags;
1084	u32 hw_rev;
1085	u32 hw_rev_step;
1086	u32 hw_rf_id;
1087	u32 hw_crf_id;
1088	u32 hw_cnv_id;
1089	u32 hw_wfpm_id;
1090	u32 hw_id;
1091	char hw_id_str[52];
1092	u32 sku_id[3];
1093
1094	u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
1095
1096	bool pm_support;
1097	bool ltr_enabled;
1098	u8 pnvm_loaded:1;
1099	u8 fail_to_parse_pnvm_image:1;
1100	u8 reduce_power_loaded:1;
1101	u8 failed_to_load_reduce_power_image:1;
1102
1103	const struct iwl_hcmd_arr *command_groups;
1104	int command_groups_size;
1105	bool wide_cmd_header;
1106
1107	wait_queue_head_t wait_command_queue;
1108	u8 num_rx_queues;
1109
1110	size_t iml_len;
1111	u8 *iml;
1112
1113	/* The following fields are internal only */
1114	struct kmem_cache *dev_cmd_pool;
1115	char dev_cmd_pool_name[50];
1116
1117	struct dentry *dbgfs_dir;
1118
1119#ifdef CONFIG_LOCKDEP
1120	struct lockdep_map sync_cmd_lockdep_map;
1121#endif
1122
1123	struct iwl_trans_debug dbg;
1124	struct iwl_self_init_dram init_dram;
 
 
1125
1126	enum iwl_plat_pm_mode system_pm_mode;
1127
1128	const char *name;
1129	struct iwl_trans_txqs txqs;
1130	u32 mbx_addr_0_step;
1131	u32 mbx_addr_1_step;
1132
1133	u8 pcie_link_speed;
1134
1135	struct iwl_dma_ptr invalid_tx_cmd;
1136
1137	/* pointer to trans specific struct */
1138	/*Ensure that this pointer will always be aligned to sizeof pointer */
1139	char trans_specific[] __aligned(sizeof(void *));
1140};
1141
1142const char *iwl_get_cmd_string(struct iwl_trans *trans, u32 id);
1143int iwl_cmd_groups_verify_sorted(const struct iwl_trans_config *trans);
1144
1145static inline void iwl_trans_configure(struct iwl_trans *trans,
1146				       const struct iwl_trans_config *trans_cfg)
1147{
1148	trans->op_mode = trans_cfg->op_mode;
1149
1150	trans->ops->configure(trans, trans_cfg);
1151	WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg));
1152}
1153
1154static inline int iwl_trans_start_hw(struct iwl_trans *trans)
1155{
1156	might_sleep();
1157
1158	return trans->ops->start_hw(trans);
 
 
 
 
 
1159}
1160
1161static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
1162{
1163	might_sleep();
1164
1165	if (trans->ops->op_mode_leave)
1166		trans->ops->op_mode_leave(trans);
1167
1168	trans->op_mode = NULL;
1169
1170	trans->state = IWL_TRANS_NO_FW;
1171}
1172
1173static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
1174{
1175	might_sleep();
1176
1177	trans->state = IWL_TRANS_FW_ALIVE;
1178
1179	trans->ops->fw_alive(trans, scd_addr);
1180}
1181
1182static inline int iwl_trans_start_fw(struct iwl_trans *trans,
1183				     const struct fw_img *fw,
1184				     bool run_in_rfkill)
1185{
1186	int ret;
1187
1188	might_sleep();
1189
1190	WARN_ON_ONCE(!trans->rx_mpdu_cmd);
1191
1192	clear_bit(STATUS_FW_ERROR, &trans->status);
1193	ret = trans->ops->start_fw(trans, fw, run_in_rfkill);
1194	if (ret == 0)
1195		trans->state = IWL_TRANS_FW_STARTED;
1196
1197	return ret;
1198}
1199
1200static inline void iwl_trans_stop_device(struct iwl_trans *trans)
 
1201{
1202	might_sleep();
1203
1204	trans->ops->stop_device(trans);
1205
1206	trans->state = IWL_TRANS_NO_FW;
1207}
1208
1209static inline int iwl_trans_d3_suspend(struct iwl_trans *trans, bool test,
1210				       bool reset)
1211{
1212	might_sleep();
1213	if (!trans->ops->d3_suspend)
1214		return -EOPNOTSUPP;
1215
1216	return trans->ops->d3_suspend(trans, test, reset);
 
 
 
 
 
1217}
1218
1219static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
1220				      enum iwl_d3_status *status,
1221				      bool test, bool reset)
1222{
1223	might_sleep();
1224	if (!trans->ops->d3_resume)
1225		return -EOPNOTSUPP;
1226
1227	return trans->ops->d3_resume(trans, status, test, reset);
1228}
1229
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1230static inline struct iwl_trans_dump_data *
1231iwl_trans_dump_data(struct iwl_trans *trans, u32 dump_mask,
1232		    const struct iwl_dump_sanitize_ops *sanitize_ops,
1233		    void *sanitize_ctx)
1234{
1235	if (!trans->ops->dump_data)
1236		return NULL;
1237	return trans->ops->dump_data(trans, dump_mask,
1238				     sanitize_ops, sanitize_ctx);
 
 
 
 
 
1239}
1240
1241static inline struct iwl_device_tx_cmd *
1242iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
1243{
1244	return kmem_cache_zalloc(trans->dev_cmd_pool, GFP_ATOMIC);
1245}
1246
1247int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
1248
1249static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
1250					 struct iwl_device_tx_cmd *dev_cmd)
1251{
1252	kmem_cache_free(trans->dev_cmd_pool, dev_cmd);
1253}
1254
1255static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
1256			       struct iwl_device_tx_cmd *dev_cmd, int queue)
1257{
1258	if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
1259		return -EIO;
1260
1261	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1262		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1263		return -EIO;
1264	}
1265
1266	return trans->ops->tx(trans, skb, dev_cmd, queue);
1267}
1268
1269static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
1270				     int ssn, struct sk_buff_head *skbs,
1271				     bool is_flush)
1272{
1273	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1274		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1275		return;
1276	}
1277
1278	trans->ops->reclaim(trans, queue, ssn, skbs, is_flush);
1279}
1280
1281static inline void iwl_trans_set_q_ptrs(struct iwl_trans *trans, int queue,
1282					int ptr)
1283{
1284	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1285		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1286		return;
1287	}
1288
1289	trans->ops->set_q_ptrs(trans, queue, ptr);
1290}
1291
1292static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
1293					 bool configure_scd)
1294{
1295	trans->ops->txq_disable(trans, queue, configure_scd);
1296}
1297
1298static inline bool
1299iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
1300			 const struct iwl_trans_txq_scd_cfg *cfg,
1301			 unsigned int queue_wdg_timeout)
1302{
1303	might_sleep();
1304
1305	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1306		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1307		return false;
1308	}
1309
1310	return trans->ops->txq_enable(trans, queue, ssn,
1311				      cfg, queue_wdg_timeout);
1312}
1313
1314static inline int
1315iwl_trans_get_rxq_dma_data(struct iwl_trans *trans, int queue,
1316			   struct iwl_trans_rxq_dma_data *data)
1317{
1318	if (WARN_ON_ONCE(!trans->ops->rxq_dma_data))
1319		return -EOPNOTSUPP;
1320
1321	return trans->ops->rxq_dma_data(trans, queue, data);
1322}
1323
1324static inline void
1325iwl_trans_txq_free(struct iwl_trans *trans, int queue)
1326{
1327	if (WARN_ON_ONCE(!trans->ops->txq_free))
1328		return;
1329
1330	trans->ops->txq_free(trans, queue);
1331}
1332
1333static inline int
1334iwl_trans_txq_alloc(struct iwl_trans *trans,
1335		    u32 flags, u32 sta_mask, u8 tid,
1336		    int size, unsigned int wdg_timeout)
 
1337{
1338	might_sleep();
1339
1340	if (WARN_ON_ONCE(!trans->ops->txq_alloc))
1341		return -EOPNOTSUPP;
1342
1343	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1344		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1345		return -EIO;
1346	}
1347
1348	return trans->ops->txq_alloc(trans, flags, sta_mask, tid,
1349				     size, wdg_timeout);
1350}
1351
1352static inline void iwl_trans_txq_set_shared_mode(struct iwl_trans *trans,
1353						 int queue, bool shared_mode)
1354{
1355	if (trans->ops->txq_set_shared_mode)
1356		trans->ops->txq_set_shared_mode(trans, queue, shared_mode);
1357}
1358
1359static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
1360					int fifo, int sta_id, int tid,
1361					int frame_limit, u16 ssn,
1362					unsigned int queue_wdg_timeout)
1363{
1364	struct iwl_trans_txq_scd_cfg cfg = {
1365		.fifo = fifo,
1366		.sta_id = sta_id,
1367		.tid = tid,
1368		.frame_limit = frame_limit,
1369		.aggregate = sta_id >= 0,
1370	};
1371
1372	iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout);
1373}
1374
1375static inline
1376void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
1377			     unsigned int queue_wdg_timeout)
1378{
1379	struct iwl_trans_txq_scd_cfg cfg = {
1380		.fifo = fifo,
1381		.sta_id = -1,
1382		.tid = IWL_MAX_TID_COUNT,
1383		.frame_limit = IWL_FRAME_LIMIT,
1384		.aggregate = false,
1385	};
1386
1387	iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
1388}
1389
1390static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans,
1391					      unsigned long txqs,
1392					      bool freeze)
1393{
1394	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1395		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1396		return;
1397	}
1398
1399	if (trans->ops->freeze_txq_timer)
1400		trans->ops->freeze_txq_timer(trans, txqs, freeze);
1401}
1402
 
 
 
 
 
 
 
 
 
 
 
 
1403static inline int iwl_trans_wait_tx_queues_empty(struct iwl_trans *trans,
1404						 u32 txqs)
1405{
1406	if (WARN_ON_ONCE(!trans->ops->wait_tx_queues_empty))
1407		return -EOPNOTSUPP;
1408
1409	/* No need to wait if the firmware is not alive */
1410	if (trans->state != IWL_TRANS_FW_ALIVE) {
1411		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1412		return -EIO;
1413	}
1414
1415	return trans->ops->wait_tx_queues_empty(trans, txqs);
1416}
1417
1418static inline int iwl_trans_wait_txq_empty(struct iwl_trans *trans, int queue)
1419{
1420	if (WARN_ON_ONCE(!trans->ops->wait_txq_empty))
1421		return -EOPNOTSUPP;
1422
1423	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1424		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1425		return -EIO;
1426	}
1427
1428	return trans->ops->wait_txq_empty(trans, queue);
1429}
1430
1431static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
1432{
1433	trans->ops->write8(trans, ofs, val);
1434}
1435
1436static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
1437{
1438	trans->ops->write32(trans, ofs, val);
1439}
1440
1441static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
1442{
1443	return trans->ops->read32(trans, ofs);
1444}
1445
1446static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
1447{
1448	return trans->ops->read_prph(trans, ofs);
1449}
1450
1451static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
1452					u32 val)
1453{
1454	return trans->ops->write_prph(trans, ofs, val);
1455}
1456
1457static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
1458				     void *buf, int dwords)
1459{
1460	return trans->ops->read_mem(trans, addr, buf, dwords);
1461}
1462
1463#define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize)		      \
1464	do {								      \
1465		if (__builtin_constant_p(bufsize))			      \
1466			BUILD_BUG_ON((bufsize) % sizeof(u32));		      \
1467		iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
1468	} while (0)
1469
1470static inline int iwl_trans_write_imr_mem(struct iwl_trans *trans,
1471					  u32 dst_addr, u64 src_addr,
1472					  u32 byte_cnt)
1473{
1474	if (trans->ops->imr_dma_data)
1475		return trans->ops->imr_dma_data(trans, dst_addr, src_addr, byte_cnt);
1476	return 0;
1477}
1478
1479static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
1480{
1481	u32 value;
1482
1483	if (iwl_trans_read_mem(trans, addr, &value, 1))
1484		return 0xa5a5a5a5;
1485
1486	return value;
1487}
1488
1489static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
1490				      const void *buf, int dwords)
1491{
1492	return trans->ops->write_mem(trans, addr, buf, dwords);
1493}
1494
1495static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
1496					u32 val)
1497{
1498	return iwl_trans_write_mem(trans, addr, &val, 1);
1499}
1500
1501static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
1502{
1503	if (trans->ops->set_pmi)
1504		trans->ops->set_pmi(trans, state);
1505}
1506
1507static inline int iwl_trans_sw_reset(struct iwl_trans *trans,
1508				     bool retake_ownership)
1509{
1510	if (trans->ops->sw_reset)
1511		return trans->ops->sw_reset(trans, retake_ownership);
1512	return 0;
1513}
1514
1515static inline void
1516iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
1517{
1518	trans->ops->set_bits_mask(trans, reg, mask, value);
1519}
1520
1521#define iwl_trans_grab_nic_access(trans)		\
1522	__cond_lock(nic_access,				\
1523		    likely((trans)->ops->grab_nic_access(trans)))
1524
1525static inline void __releases(nic_access)
1526iwl_trans_release_nic_access(struct iwl_trans *trans)
1527{
1528	trans->ops->release_nic_access(trans);
1529	__release(nic_access);
1530}
1531
1532static inline void iwl_trans_fw_error(struct iwl_trans *trans, bool sync)
1533{
1534	if (WARN_ON_ONCE(!trans->op_mode))
1535		return;
1536
1537	/* prevent double restarts due to the same erroneous FW */
1538	if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status)) {
1539		iwl_op_mode_nic_error(trans->op_mode, sync);
1540		trans->state = IWL_TRANS_NO_FW;
1541	}
1542}
1543
1544static inline bool iwl_trans_fw_running(struct iwl_trans *trans)
1545{
1546	return trans->state == IWL_TRANS_FW_ALIVE;
1547}
1548
1549static inline void iwl_trans_sync_nmi(struct iwl_trans *trans)
1550{
1551	if (trans->ops->sync_nmi)
1552		trans->ops->sync_nmi(trans);
1553}
1554
1555void iwl_trans_sync_nmi_with_addr(struct iwl_trans *trans, u32 inta_addr,
1556				  u32 sw_err_bit);
1557
1558static inline int iwl_trans_load_pnvm(struct iwl_trans *trans,
1559				      const struct iwl_pnvm_image *pnvm_data,
1560				      const struct iwl_ucode_capabilities *capa)
1561{
1562	return trans->ops->load_pnvm(trans, pnvm_data, capa);
1563}
1564
1565static inline void iwl_trans_set_pnvm(struct iwl_trans *trans,
1566				      const struct iwl_ucode_capabilities *capa)
1567{
1568	if (trans->ops->set_pnvm)
1569		trans->ops->set_pnvm(trans, capa);
1570}
1571
1572static inline int iwl_trans_load_reduce_power
1573				(struct iwl_trans *trans,
1574				 const struct iwl_pnvm_image *payloads,
1575				 const struct iwl_ucode_capabilities *capa)
1576{
1577	return trans->ops->load_reduce_power(trans, payloads, capa);
1578}
1579
1580static inline void
1581iwl_trans_set_reduce_power(struct iwl_trans *trans,
1582			   const struct iwl_ucode_capabilities *capa)
1583{
1584	if (trans->ops->set_reduce_power)
1585		trans->ops->set_reduce_power(trans, capa);
1586}
1587
1588static inline bool iwl_trans_dbg_ini_valid(struct iwl_trans *trans)
1589{
1590	return trans->dbg.internal_ini_cfg != IWL_INI_CFG_STATE_NOT_LOADED ||
1591		trans->dbg.external_ini_cfg != IWL_INI_CFG_STATE_NOT_LOADED;
1592}
1593
1594static inline void iwl_trans_interrupts(struct iwl_trans *trans, bool enable)
1595{
1596	if (trans->ops->interrupts)
1597		trans->ops->interrupts(trans, enable);
1598}
1599
1600/*****************************************************
1601 * transport helper functions
1602 *****************************************************/
1603struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
1604			  struct device *dev,
1605			  const struct iwl_trans_ops *ops,
1606			  const struct iwl_cfg_trans_params *cfg_trans);
1607int iwl_trans_init(struct iwl_trans *trans);
1608void iwl_trans_free(struct iwl_trans *trans);
1609
1610static inline bool iwl_trans_is_hw_error_value(u32 val)
1611{
1612	return ((val & ~0xf) == 0xa5a5a5a0) || ((val & ~0xf) == 0x5a5a5a50);
1613}
1614
1615/*****************************************************
1616* driver (transport) register/unregister functions
1617******************************************************/
1618int __must_check iwl_pci_register_driver(void);
1619void iwl_pci_unregister_driver(void);
1620void iwl_trans_pcie_remove(struct iwl_trans *trans, bool rescan);
1621
1622#endif /* __iwl_trans_h__ */
v4.17
   1/******************************************************************************
   2 *
   3 * This file is provided under a dual BSD/GPLv2 license.  When using or
   4 * redistributing this file, you may do so under either license.
   5 *
   6 * GPL LICENSE SUMMARY
   7 *
   8 * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
   9 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
  10 * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
  11 *
  12 * This program is free software; you can redistribute it and/or modify
  13 * it under the terms of version 2 of the GNU General Public License as
  14 * published by the Free Software Foundation.
  15 *
  16 * This program is distributed in the hope that it will be useful, but
  17 * WITHOUT ANY WARRANTY; without even the implied warranty of
  18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  19 * General Public License for more details.
  20 *
  21 * You should have received a copy of the GNU General Public License
  22 * along with this program; if not, write to the Free Software
  23 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  24 * USA
  25 *
  26 * The full GNU General Public License is included in this distribution
  27 * in the file called COPYING.
  28 *
  29 * Contact Information:
  30 *  Intel Linux Wireless <linuxwifi@intel.com>
  31 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  32 *
  33 * BSD LICENSE
  34 *
  35 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
  36 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
  37 * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
  38 * All rights reserved.
  39 *
  40 * Redistribution and use in source and binary forms, with or without
  41 * modification, are permitted provided that the following conditions
  42 * are met:
  43 *
  44 *  * Redistributions of source code must retain the above copyright
  45 *    notice, this list of conditions and the following disclaimer.
  46 *  * Redistributions in binary form must reproduce the above copyright
  47 *    notice, this list of conditions and the following disclaimer in
  48 *    the documentation and/or other materials provided with the
  49 *    distribution.
  50 *  * Neither the name Intel Corporation nor the names of its
  51 *    contributors may be used to endorse or promote products derived
  52 *    from this software without specific prior written permission.
  53 *
  54 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  55 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  56 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  57 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  58 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  59 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  60 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  61 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  62 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  63 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  64 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  65 *
  66 *****************************************************************************/
  67#ifndef __iwl_trans_h__
  68#define __iwl_trans_h__
  69
  70#include <linux/ieee80211.h>
  71#include <linux/mm.h> /* for page_address */
  72#include <linux/lockdep.h>
  73#include <linux/kernel.h>
  74
  75#include "iwl-debug.h"
  76#include "iwl-config.h"
  77#include "fw/img.h"
  78#include "iwl-op-mode.h"
 
  79#include "fw/api/cmdhdr.h"
  80#include "fw/api/txq.h"
 
 
  81
  82/**
  83 * DOC: Transport layer - what is it ?
  84 *
  85 * The transport layer is the layer that deals with the HW directly. It provides
  86 * an abstraction of the underlying HW to the upper layer. The transport layer
  87 * doesn't provide any policy, algorithm or anything of this kind, but only
  88 * mechanisms to make the HW do something. It is not completely stateless but
  89 * close to it.
  90 * We will have an implementation for each different supported bus.
  91 */
  92
  93/**
  94 * DOC: Life cycle of the transport layer
  95 *
  96 * The transport layer has a very precise life cycle.
  97 *
  98 *	1) A helper function is called during the module initialization and
  99 *	   registers the bus driver's ops with the transport's alloc function.
 100 *	2) Bus's probe calls to the transport layer's allocation functions.
 101 *	   Of course this function is bus specific.
 102 *	3) This allocation functions will spawn the upper layer which will
 103 *	   register mac80211.
 104 *
 105 *	4) At some point (i.e. mac80211's start call), the op_mode will call
 106 *	   the following sequence:
 107 *	   start_hw
 108 *	   start_fw
 109 *
 110 *	5) Then when finished (or reset):
 111 *	   stop_device
 112 *
 113 *	6) Eventually, the free function will be called.
 114 */
 115
 
 
 
 
 
 
 116#define FH_RSCSR_FRAME_SIZE_MSK		0x00003FFF	/* bits 0-13 */
 117#define FH_RSCSR_FRAME_INVALID		0x55550000
 118#define FH_RSCSR_FRAME_ALIGN		0x40
 119#define FH_RSCSR_RPA_EN			BIT(25)
 120#define FH_RSCSR_RADA_EN		BIT(26)
 121#define FH_RSCSR_RXQ_POS		16
 122#define FH_RSCSR_RXQ_MASK		0x3F0000
 123
 124struct iwl_rx_packet {
 125	/*
 126	 * The first 4 bytes of the RX frame header contain both the RX frame
 127	 * size and some flags.
 128	 * Bit fields:
 129	 * 31:    flag flush RB request
 130	 * 30:    flag ignore TC (terminal counter) request
 131	 * 29:    flag fast IRQ request
 132	 * 28-27: Reserved
 133	 * 26:    RADA enabled
 134	 * 25:    Offload enabled
 135	 * 24:    RPF enabled
 136	 * 23:    RSS enabled
 137	 * 22:    Checksum enabled
 138	 * 21-16: RX queue
 139	 * 15-14: Reserved
 140	 * 13-00: RX frame size
 141	 */
 142	__le32 len_n_flags;
 143	struct iwl_cmd_header hdr;
 144	u8 data[];
 145} __packed;
 146
 147static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt)
 148{
 149	return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
 150}
 151
 152static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
 153{
 154	return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr);
 155}
 156
 157/**
 158 * enum CMD_MODE - how to send the host commands ?
 159 *
 160 * @CMD_ASYNC: Return right away and don't wait for the response
 161 * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
 162 *	the response. The caller needs to call iwl_free_resp when done.
 163 * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
 164 *	command queue, but after other high priority commands. Valid only
 165 *	with CMD_ASYNC.
 166 * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
 167 * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
 168 * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
 169 *	(i.e. mark it as non-idle).
 170 * @CMD_WANT_ASYNC_CALLBACK: the op_mode's async callback function must be
 171 *	called after this command completes. Valid only with CMD_ASYNC.
 172 */
 173enum CMD_MODE {
 174	CMD_ASYNC		= BIT(0),
 175	CMD_WANT_SKB		= BIT(1),
 176	CMD_SEND_IN_RFKILL	= BIT(2),
 177	CMD_HIGH_PRIO		= BIT(3),
 178	CMD_SEND_IN_IDLE	= BIT(4),
 179	CMD_MAKE_TRANS_IDLE	= BIT(5),
 180	CMD_WAKE_UP_TRANS	= BIT(6),
 181	CMD_WANT_ASYNC_CALLBACK	= BIT(7),
 182};
 183
 184#define DEF_CMD_PAYLOAD_SIZE 320
 185
 186/**
 187 * struct iwl_device_cmd
 188 *
 189 * For allocation of the command and tx queues, this establishes the overall
 190 * size of the largest command we send to uCode, except for commands that
 191 * aren't fully copied and use other TFD space.
 192 */
 193struct iwl_device_cmd {
 194	union {
 195		struct {
 196			struct iwl_cmd_header hdr;	/* uCode API */
 197			u8 payload[DEF_CMD_PAYLOAD_SIZE];
 198		};
 199		struct {
 200			struct iwl_cmd_header_wide hdr_wide;
 201			u8 payload_wide[DEF_CMD_PAYLOAD_SIZE -
 202					sizeof(struct iwl_cmd_header_wide) +
 203					sizeof(struct iwl_cmd_header)];
 204		};
 205	};
 206} __packed;
 207
 
 
 
 
 
 
 
 
 
 
 
 
 208#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
 209
 210/*
 211 * number of transfer buffers (fragments) per transmit frame descriptor;
 212 * this is just the driver's idea, the hardware supports 20
 213 */
 214#define IWL_MAX_CMD_TBS_PER_TFD	2
 215
 
 
 
 
 
 
 216/**
 217 * enum iwl_hcmd_dataflag - flag for each one of the chunks of the command
 218 *
 219 * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
 220 *	ring. The transport layer doesn't map the command's buffer to DMA, but
 221 *	rather copies it to a previously allocated DMA buffer. This flag tells
 222 *	the transport layer not to copy the command, but to map the existing
 223 *	buffer (that is passed in) instead. This saves the memcpy and allows
 224 *	commands that are bigger than the fixed buffer to be submitted.
 225 *	Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
 226 * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
 227 *	chunk internally and free it again after the command completes. This
 228 *	can (currently) be used only once per command.
 229 *	Note that a TFD entry after a DUP one cannot be a normal copied one.
 230 */
 231enum iwl_hcmd_dataflag {
 232	IWL_HCMD_DFL_NOCOPY	= BIT(0),
 233	IWL_HCMD_DFL_DUP	= BIT(1),
 234};
 235
 
 
 
 
 
 
 
 
 
 
 236/**
 237 * struct iwl_host_cmd - Host command to the uCode
 238 *
 239 * @data: array of chunks that composes the data of the host command
 240 * @resp_pkt: response packet, if %CMD_WANT_SKB was set
 241 * @_rx_page_order: (internally used to free response packet)
 242 * @_rx_page_addr: (internally used to free response packet)
 243 * @flags: can be CMD_*
 244 * @len: array of the lengths of the chunks in data
 245 * @dataflags: IWL_HCMD_DFL_*
 246 * @id: command id of the host command, for wide commands encoding the
 247 *	version and group as well
 248 */
 249struct iwl_host_cmd {
 250	const void *data[IWL_MAX_CMD_TBS_PER_TFD];
 251	struct iwl_rx_packet *resp_pkt;
 252	unsigned long _rx_page_addr;
 253	u32 _rx_page_order;
 254
 255	u32 flags;
 256	u32 id;
 257	u16 len[IWL_MAX_CMD_TBS_PER_TFD];
 258	u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
 259};
 260
 261static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
 262{
 263	free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
 264}
 265
 266struct iwl_rx_cmd_buffer {
 267	struct page *_page;
 268	int _offset;
 269	bool _page_stolen;
 270	u32 _rx_page_order;
 271	unsigned int truesize;
 272};
 273
 274static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
 275{
 276	return (void *)((unsigned long)page_address(r->_page) + r->_offset);
 277}
 278
 279static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
 280{
 281	return r->_offset;
 282}
 283
 284static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
 285{
 286	r->_page_stolen = true;
 287	get_page(r->_page);
 288	return r->_page;
 289}
 290
 291static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
 292{
 293	__free_pages(r->_page, r->_rx_page_order);
 294}
 295
 296#define MAX_NO_RECLAIM_CMDS	6
 297
 298#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
 299
 300/*
 301 * Maximum number of HW queues the transport layer
 302 * currently supports
 303 */
 304#define IWL_MAX_HW_QUEUES		32
 305#define IWL_MAX_TVQM_QUEUES		512
 306
 307#define IWL_MAX_TID_COUNT	8
 308#define IWL_MGMT_TID		15
 309#define IWL_FRAME_LIMIT	64
 310#define IWL_MAX_RX_HW_QUEUES	16
 
 311
 312/**
 313 * enum iwl_wowlan_status - WoWLAN image/device status
 314 * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
 315 * @IWL_D3_STATUS_RESET: device was reset while suspended
 316 */
 317enum iwl_d3_status {
 318	IWL_D3_STATUS_ALIVE,
 319	IWL_D3_STATUS_RESET,
 320};
 321
 322/**
 323 * enum iwl_trans_status: transport status flags
 324 * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
 325 * @STATUS_DEVICE_ENABLED: APM is enabled
 326 * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
 327 * @STATUS_INT_ENABLED: interrupts are enabled
 328 * @STATUS_RFKILL_HW: the actual HW state of the RF-kill switch
 329 * @STATUS_RFKILL_OPMODE: RF-kill state reported to opmode
 330 * @STATUS_FW_ERROR: the fw is in error state
 331 * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
 332 *	are sent
 333 * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
 334 * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation
 
 
 335 */
 336enum iwl_trans_status {
 337	STATUS_SYNC_HCMD_ACTIVE,
 338	STATUS_DEVICE_ENABLED,
 339	STATUS_TPOWER_PMI,
 340	STATUS_INT_ENABLED,
 341	STATUS_RFKILL_HW,
 342	STATUS_RFKILL_OPMODE,
 343	STATUS_FW_ERROR,
 344	STATUS_TRANS_GOING_IDLE,
 345	STATUS_TRANS_IDLE,
 346	STATUS_TRANS_DEAD,
 
 347};
 348
 349static inline int
 350iwl_trans_get_rb_size_order(enum iwl_amsdu_size rb_size)
 351{
 352	switch (rb_size) {
 
 
 353	case IWL_AMSDU_4K:
 354		return get_order(4 * 1024);
 355	case IWL_AMSDU_8K:
 356		return get_order(8 * 1024);
 357	case IWL_AMSDU_12K:
 358		return get_order(12 * 1024);
 359	default:
 360		WARN_ON(1);
 361		return -1;
 362	}
 363}
 364
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 365struct iwl_hcmd_names {
 366	u8 cmd_id;
 367	const char *const cmd_name;
 368};
 369
 370#define HCMD_NAME(x)	\
 371	{ .cmd_id = x, .cmd_name = #x }
 372
 373struct iwl_hcmd_arr {
 374	const struct iwl_hcmd_names *arr;
 375	int size;
 376};
 377
 378#define HCMD_ARR(x)	\
 379	{ .arr = x, .size = ARRAY_SIZE(x) }
 380
 381/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 382 * struct iwl_trans_config - transport configuration
 383 *
 384 * @op_mode: pointer to the upper layer.
 385 * @cmd_queue: the index of the command queue.
 386 *	Must be set before start_fw.
 387 * @cmd_fifo: the fifo for host commands
 388 * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue.
 389 * @no_reclaim_cmds: Some devices erroneously don't set the
 390 *	SEQ_RX_FRAME bit on some notifications, this is the
 391 *	list of such notifications to filter. Max length is
 392 *	%MAX_NO_RECLAIM_CMDS.
 393 * @n_no_reclaim_cmds: # of commands in list
 394 * @rx_buf_size: RX buffer size needed for A-MSDUs
 395 *	if unset 4k will be the RX buffer size
 396 * @bc_table_dword: set to true if the BC table expects the byte count to be
 397 *	in DWORD (as opposed to bytes)
 398 * @scd_set_active: should the transport configure the SCD for HCMD queue
 399 * @sw_csum_tx: transport should compute the TCP checksum
 400 * @command_groups: array of command groups, each member is an array of the
 401 *	commands in the group; for debugging only
 402 * @command_groups_size: number of command groups, to avoid illegal access
 403 * @cb_data_offs: offset inside skb->cb to store transport data at, must have
 404 *	space for at least two pointers
 
 
 
 
 405 */
 406struct iwl_trans_config {
 407	struct iwl_op_mode *op_mode;
 408
 409	u8 cmd_queue;
 410	u8 cmd_fifo;
 411	unsigned int cmd_q_wdg_timeout;
 412	const u8 *no_reclaim_cmds;
 413	unsigned int n_no_reclaim_cmds;
 414
 415	enum iwl_amsdu_size rx_buf_size;
 416	bool bc_table_dword;
 417	bool scd_set_active;
 418	bool sw_csum_tx;
 419	const struct iwl_hcmd_arr *command_groups;
 420	int command_groups_size;
 421
 422	u8 cb_data_offs;
 
 
 423};
 424
 425struct iwl_trans_dump_data {
 426	u32 len;
 427	u8 data[];
 428};
 429
 430struct iwl_trans;
 431
 432struct iwl_trans_txq_scd_cfg {
 433	u8 fifo;
 434	u8 sta_id;
 435	u8 tid;
 436	bool aggregate;
 437	int frame_limit;
 438};
 439
 440/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 441 * struct iwl_trans_ops - transport specific operations
 442 *
 443 * All the handlers MUST be implemented
 444 *
 445 * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken
 446 *	out of a low power state. From that point on, the HW can send
 447 *	interrupts. May sleep.
 448 * @op_mode_leave: Turn off the HW RF kill indication if on
 449 *	May sleep
 450 * @start_fw: allocates and inits all the resources for the transport
 451 *	layer. Also kick a fw image.
 452 *	May sleep
 453 * @fw_alive: called when the fw sends alive notification. If the fw provides
 454 *	the SCD base address in SRAM, then provide it here, or 0 otherwise.
 455 *	May sleep
 456 * @stop_device: stops the whole device (embedded CPU put to reset) and stops
 457 *	the HW. If low_power is true, the NIC will be put in low power state.
 458 *	From that point on, the HW will be stopped but will still issue an
 459 *	interrupt if the HW RF kill switch is triggered.
 460 *	This callback must do the right thing and not crash even if %start_hw()
 461 *	was called but not &start_fw(). May sleep.
 462 * @d3_suspend: put the device into the correct mode for WoWLAN during
 463 *	suspend. This is optional, if not implemented WoWLAN will not be
 464 *	supported. This callback may sleep.
 465 * @d3_resume: resume the device after WoWLAN, enabling the opmode to
 466 *	talk to the WoWLAN image to get its status. This is optional, if not
 467 *	implemented WoWLAN will not be supported. This callback may sleep.
 468 * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
 469 *	If RFkill is asserted in the middle of a SYNC host command, it must
 470 *	return -ERFKILL straight away.
 471 *	May sleep only if CMD_ASYNC is not set
 472 * @tx: send an skb. The transport relies on the op_mode to zero the
 473 *	the ieee80211_tx_info->driver_data. If the MPDU is an A-MSDU, all
 474 *	the CSUM will be taken care of (TCP CSUM and IP header in case of
 475 *	IPv4). If the MPDU is a single MSDU, the op_mode must compute the IP
 476 *	header if it is IPv4.
 477 *	Must be atomic
 478 * @reclaim: free packet until ssn. Returns a list of freed packets.
 479 *	Must be atomic
 480 * @txq_enable: setup a queue. To setup an AC queue, use the
 481 *	iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
 482 *	this one. The op_mode must not configure the HCMD queue. The scheduler
 483 *	configuration may be %NULL, in which case the hardware will not be
 484 *	configured. If true is returned, the operation mode needs to increment
 485 *	the sequence number of the packets routed to this queue because of a
 486 *	hardware scheduler bug. May sleep.
 487 * @txq_disable: de-configure a Tx queue to send AMPDUs
 488 *	Must be atomic
 489 * @txq_set_shared_mode: change Tx queue shared/unshared marking
 490 * @wait_tx_queues_empty: wait until tx queues are empty. May sleep.
 491 * @wait_txq_empty: wait until specific tx queue is empty. May sleep.
 492 * @freeze_txq_timer: prevents the timer of the queue from firing until the
 493 *	queue is set to awake. Must be atomic.
 494 * @block_txq_ptrs: stop updating the write pointers of the Tx queues. Note
 495 *	that the transport needs to refcount the calls since this function
 496 *	will be called several times with block = true, and then the queues
 497 *	need to be unblocked only after the same number of calls with
 498 *	block = false.
 499 * @write8: write a u8 to a register at offset ofs from the BAR
 500 * @write32: write a u32 to a register at offset ofs from the BAR
 501 * @read32: read a u32 register at offset ofs from the BAR
 502 * @read_prph: read a DWORD from a periphery register
 503 * @write_prph: write a DWORD to a periphery register
 504 * @read_mem: read device's SRAM in DWORD
 505 * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
 506 *	will be zeroed.
 
 
 507 * @configure: configure parameters required by the transport layer from
 508 *	the op_mode. May be called several times before start_fw, can't be
 509 *	called after that.
 510 * @set_pmi: set the power pmi state
 511 * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
 512 *	Sleeping is not allowed between grab_nic_access and
 513 *	release_nic_access.
 514 * @release_nic_access: let the NIC go to sleep. The "flags" parameter
 515 *	must be the same one that was sent before to the grab_nic_access.
 516 * @set_bits_mask - set SRAM register according to value and mask.
 517 * @ref: grab a reference to the transport/FW layers, disallowing
 518 *	certain low power states
 519 * @unref: release a reference previously taken with @ref. Note that
 520 *	initially the reference count is 1, making an initial @unref
 521 *	necessary to allow low power states.
 522 * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last
 523 *	TX'ed commands and similar. The buffer will be vfree'd by the caller.
 524 *	Note that the transport must fill in the proper file headers.
 525 * @dump_regs: dump using IWL_ERR configuration space and memory mapped
 526 *	registers of the device to diagnose failure, e.g., when HW becomes
 527 *	inaccessible.
 
 
 
 
 
 528 */
 529struct iwl_trans_ops {
 530
 531	int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power);
 532	void (*op_mode_leave)(struct iwl_trans *iwl_trans);
 533	int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
 534			bool run_in_rfkill);
 535	void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
 536	void (*stop_device)(struct iwl_trans *trans, bool low_power);
 537
 538	void (*d3_suspend)(struct iwl_trans *trans, bool test, bool reset);
 539	int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
 540			 bool test, bool reset);
 541
 542	int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
 543
 544	int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
 545		  struct iwl_device_cmd *dev_cmd, int queue);
 546	void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
 547			struct sk_buff_head *skbs);
 
 
 548
 549	bool (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
 550			   const struct iwl_trans_txq_scd_cfg *cfg,
 551			   unsigned int queue_wdg_timeout);
 552	void (*txq_disable)(struct iwl_trans *trans, int queue,
 553			    bool configure_scd);
 554	/* 22000 functions */
 555	int (*txq_alloc)(struct iwl_trans *trans,
 556			 struct iwl_tx_queue_cfg_cmd *cmd,
 557			 int cmd_id,
 558			 unsigned int queue_wdg_timeout);
 559	void (*txq_free)(struct iwl_trans *trans, int queue);
 
 
 560
 561	void (*txq_set_shared_mode)(struct iwl_trans *trans, u32 txq_id,
 562				    bool shared);
 563
 564	int (*wait_tx_queues_empty)(struct iwl_trans *trans, u32 txq_bm);
 565	int (*wait_txq_empty)(struct iwl_trans *trans, int queue);
 566	void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs,
 567				 bool freeze);
 568	void (*block_txq_ptrs)(struct iwl_trans *trans, bool block);
 569
 570	void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
 571	void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
 572	u32 (*read32)(struct iwl_trans *trans, u32 ofs);
 573	u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
 574	void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
 575	int (*read_mem)(struct iwl_trans *trans, u32 addr,
 576			void *buf, int dwords);
 577	int (*write_mem)(struct iwl_trans *trans, u32 addr,
 578			 const void *buf, int dwords);
 
 579	void (*configure)(struct iwl_trans *trans,
 580			  const struct iwl_trans_config *trans_cfg);
 581	void (*set_pmi)(struct iwl_trans *trans, bool state);
 582	void (*sw_reset)(struct iwl_trans *trans);
 583	bool (*grab_nic_access)(struct iwl_trans *trans, unsigned long *flags);
 584	void (*release_nic_access)(struct iwl_trans *trans,
 585				   unsigned long *flags);
 586	void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
 587			      u32 value);
 588	void (*ref)(struct iwl_trans *trans);
 589	void (*unref)(struct iwl_trans *trans);
 590	int  (*suspend)(struct iwl_trans *trans);
 591	void (*resume)(struct iwl_trans *trans);
 592
 593	struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans,
 594						 const struct iwl_fw_dbg_trigger_tlv
 595						 *trigger);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 596
 597	void (*dump_regs)(struct iwl_trans *trans);
 598};
 599
 600/**
 601 * enum iwl_trans_state - state of the transport layer
 602 *
 603 * @IWL_TRANS_NO_FW: no fw has sent an alive response
 604 * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
 
 605 */
 606enum iwl_trans_state {
 607	IWL_TRANS_NO_FW = 0,
 608	IWL_TRANS_FW_ALIVE	= 1,
 
 609};
 610
 611/**
 612 * DOC: Platform power management
 613 *
 614 * There are two types of platform power management: system-wide
 615 * (WoWLAN) and runtime.
 616 *
 617 * In system-wide power management the entire platform goes into a low
 618 * power state (e.g. idle or suspend to RAM) at the same time and the
 619 * device is configured as a wakeup source for the entire platform.
 620 * This is usually triggered by userspace activity (e.g. the user
 621 * presses the suspend button or a power management daemon decides to
 622 * put the platform in low power mode).  The device's behavior in this
 623 * mode is dictated by the wake-on-WLAN configuration.
 624 *
 625 * In runtime power management, only the devices which are themselves
 626 * idle enter a low power state.  This is done at runtime, which means
 627 * that the entire system is still running normally.  This mode is
 628 * usually triggered automatically by the device driver and requires
 629 * the ability to enter and exit the low power modes in a very short
 630 * time, so there is not much impact in usability.
 631 *
 632 * The terms used for the device's behavior are as follows:
 633 *
 634 *	- D0: the device is fully powered and the host is awake;
 635 *	- D3: the device is in low power mode and only reacts to
 636 *		specific events (e.g. magic-packet received or scan
 637 *		results found);
 638 *	- D0I3: the device is in low power mode and reacts to any
 639 *		activity (e.g. RX);
 640 *
 641 * These terms reflect the power modes in the firmware and are not to
 642 * be confused with the physical device power state.  The NIC can be
 643 * in D0I3 mode even if, for instance, the PCI device is in D3 state.
 644 */
 645
 646/**
 647 * enum iwl_plat_pm_mode - platform power management mode
 648 *
 649 * This enumeration describes the device's platform power management
 650 * behavior when in idle mode (i.e. runtime power management) or when
 651 * in system-wide suspend (i.e WoWLAN).
 652 *
 653 * @IWL_PLAT_PM_MODE_DISABLED: power management is disabled for this
 654 *	device.  At runtime, this means that nothing happens and the
 655 *	device always remains in active.  In system-wide suspend mode,
 656 *	it means that the all connections will be closed automatically
 657 *	by mac80211 before the platform is suspended.
 658 * @IWL_PLAT_PM_MODE_D3: the device goes into D3 mode (i.e. WoWLAN).
 659 *	For runtime power management, this mode is not officially
 660 *	supported.
 661 * @IWL_PLAT_PM_MODE_D0I3: the device goes into D0I3 mode.
 662 */
 663enum iwl_plat_pm_mode {
 664	IWL_PLAT_PM_MODE_DISABLED,
 665	IWL_PLAT_PM_MODE_D3,
 666	IWL_PLAT_PM_MODE_D0I3,
 667};
 668
 669/* Max time to wait for trans to become idle/non-idle on d0i3
 670 * enter/exit (in msecs).
 
 
 
 
 671 */
 672#define IWL_TRANS_IDLE_TIMEOUT 2000
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 673
 674/**
 675 * struct iwl_trans - transport common data
 676 *
 
 677 * @ops - pointer to iwl_trans_ops
 678 * @op_mode - pointer to the op_mode
 
 679 * @cfg - pointer to the configuration
 680 * @drv - pointer to iwl_drv
 681 * @status: a bit-mask of transport status flags
 682 * @dev - pointer to struct device * that represents the device
 683 * @max_skb_frags: maximum number of fragments an SKB can have when transmitted.
 684 *	0 indicates that frag SKBs (NETIF_F_SG) aren't supported.
 685 * @hw_rf_id a u32 with the device RF ID
 
 
 686 * @hw_id: a u32 with the ID of the device / sub-device.
 687 *	Set during transport allocation.
 688 * @hw_id_str: a string with info about HW ID. Set during transport allocation.
 
 689 * @pm_support: set to true in start_hw if link pm is supported
 690 * @ltr_enabled: set to true if the LTR is enabled
 
 
 691 * @wide_cmd_header: true when ucode supports wide command header format
 
 692 * @num_rx_queues: number of RX queues allocated by the transport;
 693 *	the transport must set this before calling iwl_drv_start()
 
 
 694 * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
 695 *	The user should use iwl_trans_{alloc,free}_tx_cmd.
 696 * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
 697 *	starting the firmware, used for tracing
 698 * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
 699 *	start of the 802.11 header in the @rx_mpdu_cmd
 700 * @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
 701 * @dbg_dest_tlv: points to the destination TLV for debug
 702 * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
 703 * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug
 704 * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
 705 * @system_pm_mode: the system-wide power management mode in use.
 706 *	This mode is set dynamically, depending on the WoWLAN values
 707 *	configured from the userspace at runtime.
 708 * @runtime_pm_mode: the runtime power management mode in use.  This
 709 *	mode is set during the initialization phase and is not
 710 *	supposed to change during runtime.
 
 
 
 711 */
 712struct iwl_trans {
 
 713	const struct iwl_trans_ops *ops;
 714	struct iwl_op_mode *op_mode;
 
 715	const struct iwl_cfg *cfg;
 716	struct iwl_drv *drv;
 717	enum iwl_trans_state state;
 718	unsigned long status;
 719
 720	struct device *dev;
 721	u32 max_skb_frags;
 722	u32 hw_rev;
 
 723	u32 hw_rf_id;
 
 
 
 724	u32 hw_id;
 725	char hw_id_str[52];
 
 726
 727	u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
 728
 729	bool pm_support;
 730	bool ltr_enabled;
 
 
 
 
 731
 732	const struct iwl_hcmd_arr *command_groups;
 733	int command_groups_size;
 734	bool wide_cmd_header;
 735
 
 736	u8 num_rx_queues;
 737
 
 
 
 738	/* The following fields are internal only */
 739	struct kmem_cache *dev_cmd_pool;
 740	char dev_cmd_pool_name[50];
 741
 742	struct dentry *dbgfs_dir;
 743
 744#ifdef CONFIG_LOCKDEP
 745	struct lockdep_map sync_cmd_lockdep_map;
 746#endif
 747
 748	const struct iwl_fw_dbg_dest_tlv_v1 *dbg_dest_tlv;
 749	const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX];
 750	struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv;
 751	u8 dbg_dest_reg_num;
 752
 753	enum iwl_plat_pm_mode system_pm_mode;
 754	enum iwl_plat_pm_mode runtime_pm_mode;
 755	bool suspending;
 
 
 
 
 
 
 
 756
 757	/* pointer to trans specific struct */
 758	/*Ensure that this pointer will always be aligned to sizeof pointer */
 759	char trans_specific[0] __aligned(sizeof(void *));
 760};
 761
 762const char *iwl_get_cmd_string(struct iwl_trans *trans, u32 id);
 763int iwl_cmd_groups_verify_sorted(const struct iwl_trans_config *trans);
 764
 765static inline void iwl_trans_configure(struct iwl_trans *trans,
 766				       const struct iwl_trans_config *trans_cfg)
 767{
 768	trans->op_mode = trans_cfg->op_mode;
 769
 770	trans->ops->configure(trans, trans_cfg);
 771	WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg));
 772}
 773
 774static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power)
 775{
 776	might_sleep();
 777
 778	return trans->ops->start_hw(trans, low_power);
 779}
 780
 781static inline int iwl_trans_start_hw(struct iwl_trans *trans)
 782{
 783	return trans->ops->start_hw(trans, true);
 784}
 785
 786static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
 787{
 788	might_sleep();
 789
 790	if (trans->ops->op_mode_leave)
 791		trans->ops->op_mode_leave(trans);
 792
 793	trans->op_mode = NULL;
 794
 795	trans->state = IWL_TRANS_NO_FW;
 796}
 797
 798static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
 799{
 800	might_sleep();
 801
 802	trans->state = IWL_TRANS_FW_ALIVE;
 803
 804	trans->ops->fw_alive(trans, scd_addr);
 805}
 806
 807static inline int iwl_trans_start_fw(struct iwl_trans *trans,
 808				     const struct fw_img *fw,
 809				     bool run_in_rfkill)
 810{
 
 
 811	might_sleep();
 812
 813	WARN_ON_ONCE(!trans->rx_mpdu_cmd);
 814
 815	clear_bit(STATUS_FW_ERROR, &trans->status);
 816	return trans->ops->start_fw(trans, fw, run_in_rfkill);
 
 
 
 
 817}
 818
 819static inline void _iwl_trans_stop_device(struct iwl_trans *trans,
 820					  bool low_power)
 821{
 822	might_sleep();
 823
 824	trans->ops->stop_device(trans, low_power);
 825
 826	trans->state = IWL_TRANS_NO_FW;
 827}
 828
 829static inline void iwl_trans_stop_device(struct iwl_trans *trans)
 
 830{
 831	_iwl_trans_stop_device(trans, true);
 832}
 
 833
 834static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test,
 835					bool reset)
 836{
 837	might_sleep();
 838	if (trans->ops->d3_suspend)
 839		trans->ops->d3_suspend(trans, test, reset);
 840}
 841
 842static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
 843				      enum iwl_d3_status *status,
 844				      bool test, bool reset)
 845{
 846	might_sleep();
 847	if (!trans->ops->d3_resume)
 848		return 0;
 849
 850	return trans->ops->d3_resume(trans, status, test, reset);
 851}
 852
 853static inline int iwl_trans_suspend(struct iwl_trans *trans)
 854{
 855	if (!trans->ops->suspend)
 856		return 0;
 857
 858	return trans->ops->suspend(trans);
 859}
 860
 861static inline void iwl_trans_resume(struct iwl_trans *trans)
 862{
 863	if (trans->ops->resume)
 864		trans->ops->resume(trans);
 865}
 866
 867static inline struct iwl_trans_dump_data *
 868iwl_trans_dump_data(struct iwl_trans *trans,
 869		    const struct iwl_fw_dbg_trigger_tlv *trigger)
 
 870{
 871	if (!trans->ops->dump_data)
 872		return NULL;
 873	return trans->ops->dump_data(trans, trigger);
 874}
 875
 876static inline void iwl_trans_dump_regs(struct iwl_trans *trans)
 877{
 878	if (trans->ops->dump_regs)
 879		trans->ops->dump_regs(trans);
 880}
 881
 882static inline struct iwl_device_cmd *
 883iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
 884{
 885	return kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
 886}
 887
 888int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
 889
 890static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
 891					 struct iwl_device_cmd *dev_cmd)
 892{
 893	kmem_cache_free(trans->dev_cmd_pool, dev_cmd);
 894}
 895
 896static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
 897			       struct iwl_device_cmd *dev_cmd, int queue)
 898{
 899	if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
 900		return -EIO;
 901
 902	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
 903		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
 904		return -EIO;
 905	}
 906
 907	return trans->ops->tx(trans, skb, dev_cmd, queue);
 908}
 909
 910static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
 911				     int ssn, struct sk_buff_head *skbs)
 
 
 
 
 
 
 
 
 
 
 
 
 912{
 913	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
 914		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
 915		return;
 916	}
 917
 918	trans->ops->reclaim(trans, queue, ssn, skbs);
 919}
 920
 921static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
 922					 bool configure_scd)
 923{
 924	trans->ops->txq_disable(trans, queue, configure_scd);
 925}
 926
 927static inline bool
 928iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
 929			 const struct iwl_trans_txq_scd_cfg *cfg,
 930			 unsigned int queue_wdg_timeout)
 931{
 932	might_sleep();
 933
 934	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
 935		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
 936		return false;
 937	}
 938
 939	return trans->ops->txq_enable(trans, queue, ssn,
 940				      cfg, queue_wdg_timeout);
 941}
 942
 
 
 
 
 
 
 
 
 
 
 943static inline void
 944iwl_trans_txq_free(struct iwl_trans *trans, int queue)
 945{
 946	if (WARN_ON_ONCE(!trans->ops->txq_free))
 947		return;
 948
 949	trans->ops->txq_free(trans, queue);
 950}
 951
 952static inline int
 953iwl_trans_txq_alloc(struct iwl_trans *trans,
 954		    struct iwl_tx_queue_cfg_cmd *cmd,
 955		    int cmd_id,
 956		    unsigned int queue_wdg_timeout)
 957{
 958	might_sleep();
 959
 960	if (WARN_ON_ONCE(!trans->ops->txq_alloc))
 961		return -ENOTSUPP;
 962
 963	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
 964		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
 965		return -EIO;
 966	}
 967
 968	return trans->ops->txq_alloc(trans, cmd, cmd_id, queue_wdg_timeout);
 
 969}
 970
 971static inline void iwl_trans_txq_set_shared_mode(struct iwl_trans *trans,
 972						 int queue, bool shared_mode)
 973{
 974	if (trans->ops->txq_set_shared_mode)
 975		trans->ops->txq_set_shared_mode(trans, queue, shared_mode);
 976}
 977
 978static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
 979					int fifo, int sta_id, int tid,
 980					int frame_limit, u16 ssn,
 981					unsigned int queue_wdg_timeout)
 982{
 983	struct iwl_trans_txq_scd_cfg cfg = {
 984		.fifo = fifo,
 985		.sta_id = sta_id,
 986		.tid = tid,
 987		.frame_limit = frame_limit,
 988		.aggregate = sta_id >= 0,
 989	};
 990
 991	iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout);
 992}
 993
 994static inline
 995void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
 996			     unsigned int queue_wdg_timeout)
 997{
 998	struct iwl_trans_txq_scd_cfg cfg = {
 999		.fifo = fifo,
1000		.sta_id = -1,
1001		.tid = IWL_MAX_TID_COUNT,
1002		.frame_limit = IWL_FRAME_LIMIT,
1003		.aggregate = false,
1004	};
1005
1006	iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
1007}
1008
1009static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans,
1010					      unsigned long txqs,
1011					      bool freeze)
1012{
1013	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1014		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1015		return;
1016	}
1017
1018	if (trans->ops->freeze_txq_timer)
1019		trans->ops->freeze_txq_timer(trans, txqs, freeze);
1020}
1021
1022static inline void iwl_trans_block_txq_ptrs(struct iwl_trans *trans,
1023					    bool block)
1024{
1025	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1026		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1027		return;
1028	}
1029
1030	if (trans->ops->block_txq_ptrs)
1031		trans->ops->block_txq_ptrs(trans, block);
1032}
1033
1034static inline int iwl_trans_wait_tx_queues_empty(struct iwl_trans *trans,
1035						 u32 txqs)
1036{
1037	if (WARN_ON_ONCE(!trans->ops->wait_tx_queues_empty))
1038		return -ENOTSUPP;
1039
1040	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
 
1041		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1042		return -EIO;
1043	}
1044
1045	return trans->ops->wait_tx_queues_empty(trans, txqs);
1046}
1047
1048static inline int iwl_trans_wait_txq_empty(struct iwl_trans *trans, int queue)
1049{
1050	if (WARN_ON_ONCE(!trans->ops->wait_txq_empty))
1051		return -ENOTSUPP;
1052
1053	if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1054		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1055		return -EIO;
1056	}
1057
1058	return trans->ops->wait_txq_empty(trans, queue);
1059}
1060
1061static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
1062{
1063	trans->ops->write8(trans, ofs, val);
1064}
1065
1066static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
1067{
1068	trans->ops->write32(trans, ofs, val);
1069}
1070
1071static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
1072{
1073	return trans->ops->read32(trans, ofs);
1074}
1075
1076static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
1077{
1078	return trans->ops->read_prph(trans, ofs);
1079}
1080
1081static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
1082					u32 val)
1083{
1084	return trans->ops->write_prph(trans, ofs, val);
1085}
1086
1087static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
1088				     void *buf, int dwords)
1089{
1090	return trans->ops->read_mem(trans, addr, buf, dwords);
1091}
1092
1093#define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize)		      \
1094	do {								      \
1095		if (__builtin_constant_p(bufsize))			      \
1096			BUILD_BUG_ON((bufsize) % sizeof(u32));		      \
1097		iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
1098	} while (0)
1099
 
 
 
 
 
 
 
 
 
1100static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
1101{
1102	u32 value;
1103
1104	if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1)))
1105		return 0xa5a5a5a5;
1106
1107	return value;
1108}
1109
1110static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
1111				      const void *buf, int dwords)
1112{
1113	return trans->ops->write_mem(trans, addr, buf, dwords);
1114}
1115
1116static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
1117					u32 val)
1118{
1119	return iwl_trans_write_mem(trans, addr, &val, 1);
1120}
1121
1122static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
1123{
1124	if (trans->ops->set_pmi)
1125		trans->ops->set_pmi(trans, state);
1126}
1127
1128static inline void iwl_trans_sw_reset(struct iwl_trans *trans)
 
1129{
1130	if (trans->ops->sw_reset)
1131		trans->ops->sw_reset(trans);
 
1132}
1133
1134static inline void
1135iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
1136{
1137	trans->ops->set_bits_mask(trans, reg, mask, value);
1138}
1139
1140#define iwl_trans_grab_nic_access(trans, flags)	\
1141	__cond_lock(nic_access,				\
1142		    likely((trans)->ops->grab_nic_access(trans, flags)))
1143
1144static inline void __releases(nic_access)
1145iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
1146{
1147	trans->ops->release_nic_access(trans, flags);
1148	__release(nic_access);
1149}
1150
1151static inline void iwl_trans_fw_error(struct iwl_trans *trans)
1152{
1153	if (WARN_ON_ONCE(!trans->op_mode))
1154		return;
1155
1156	/* prevent double restarts due to the same erroneous FW */
1157	if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
1158		iwl_op_mode_nic_error(trans->op_mode);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1159}
1160
1161/*****************************************************
1162 * transport helper functions
1163 *****************************************************/
1164struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
1165				  struct device *dev,
1166				  const struct iwl_cfg *cfg,
1167				  const struct iwl_trans_ops *ops);
 
1168void iwl_trans_free(struct iwl_trans *trans);
1169void iwl_trans_ref(struct iwl_trans *trans);
1170void iwl_trans_unref(struct iwl_trans *trans);
 
 
 
1171
1172/*****************************************************
1173* driver (transport) register/unregister functions
1174******************************************************/
1175int __must_check iwl_pci_register_driver(void);
1176void iwl_pci_unregister_driver(void);
 
1177
1178#endif /* __iwl_trans_h__ */