1# SPDX-License-Identifier: GPL-2.0-only
  2
  3menuconfig CAN_SJA1000
  4	tristate "Philips/NXP SJA1000 devices"
  5	depends on HAS_IOMEM
  6
  7if CAN_SJA1000
  8
  9config CAN_EMS_PCI
 10	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
 11	depends on PCI
 12	help
 13	  This driver is for the one, two or four channel CPC-PCI,
 14	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
 15	  (http://www.ems-wuensche.de).
 
 
 
 
 
 
 
 
 
 16
 17config CAN_EMS_PCMCIA
 18	tristate "EMS CPC-CARD Card"
 19	depends on PCMCIA
 20	help
 21	  This driver is for the one or two channel CPC-CARD cards from
 22	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 23
 24config CAN_F81601
 25	tristate "Fintek F81601 PCIE to 2 CAN Controller"
 26	depends on PCI
 27	help
 28	  This driver adds support for Fintek F81601 PCIE to 2 CAN
 29	  Controller. It had internal 24MHz clock source, but it can
 30	  be changed by manufacturer. Use modinfo to get usage for
 31	  parameters. Visit http://www.fintek.com.tw to get more
 32	  information.
 33
 34config CAN_KVASER_PCI
 35	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
 36	depends on PCI
 37	help
 38	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
 39	  4 channel) from Kvaser (http://www.kvaser.com).
 
 
 
 40
 41config CAN_PEAK_PCI
 42	tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
 43	depends on PCI
 44	help
 45	  This driver is for the PCAN-PCI/PCIe/miniPCI cards
 46	  (1, 2, 3 or 4 channels) from PEAK-System Technik
 47	  (http://www.peak-system.com).
 48
 49config CAN_PEAK_PCIEC
 50	bool "PEAK PCAN-ExpressCard Cards"
 51	depends on CAN_PEAK_PCI
 52	select I2C
 53	select I2C_ALGOBIT
 54	default y
 55	help
 56	  Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
 57	  Technik. This will also automatically select I2C and I2C_ALGO
 58	  configuration options.
 59
 60config CAN_PEAK_PCMCIA
 61	tristate "PEAK PCAN-PC Card"
 62	depends on PCMCIA
 63	depends on HAS_IOPORT_MAP
 64	help
 65	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
 66	  from PEAK-System (http://www.peak-system.com). To compile this
 67	  driver as a module, choose M here: the module will be called
 68	  peak_pcmcia.
 69
 70config CAN_PLX_PCI
 71	tristate "PLX90xx PCI-bridge based Cards"
 72	depends on PCI
 73	help
 74	  This driver is for CAN interface cards based on
 75	  the PLX90xx PCI bridge.
 76	  Driver supports now:
 77	   - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
 78	   - Adlink PCI-7841/cPCI-7841 SE card
 79	   - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
 80	   - esd CAN-PCI/PMC/266
 81	   - esd CAN-PCIe/2000
 82	   - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
 83	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
 84	   - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
 85	   - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
 86	   - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
 87
 88config CAN_SJA1000_ISA
 89	tristate "ISA Bus based legacy SJA1000 driver"
 90	help
 91	  This driver adds legacy support for SJA1000 chips connected to
 92	  the ISA bus using I/O port, memory mapped or indirect access.
 93
 94config CAN_SJA1000_PLATFORM
 95	tristate "Generic Platform Bus based SJA1000 driver"
 96	help
 97	  This driver adds support for the SJA1000 chips connected to
 98	  the "platform bus" (Linux abstraction for directly to the
 99	  processor attached devices).  Which can be found on various
100	  boards from Phytec (http://www.phytec.de) like the PCM027,
101	  PCM038. It also provides the OpenFirmware "platform bus" found
102	  on embedded systems with OpenFirmware bindings, e.g. if you
103	  have a PowerPC based system you may want to enable this option.
104
105config CAN_TSCAN1
106	tristate "TS-CAN1 PC104 boards"
107	depends on ISA
108	help
109	  This driver is for Technologic Systems' TSCAN-1 PC104 boards.
110	  https://www.embeddedts.com/products/TS-CAN1
111	  The driver supports multiple boards and automatically configures them:
112	  PLD IO base addresses are read from jumpers JP1 and JP2,
113	  IRQ numbers are read from jumpers JP4 and JP5,
114	  SJA1000 IO base addresses are chosen heuristically (first that works).
115
116endif

 
 
  1menuconfig CAN_SJA1000
  2	tristate "Philips/NXP SJA1000 devices"
  3	depends on HAS_IOMEM
  4
  5if CAN_SJA1000
  6
  7config CAN_SJA1000_ISA
  8	tristate "ISA Bus based legacy SJA1000 driver"
  9	---help---
 10	  This driver adds legacy support for SJA1000 chips connected to
 11	  the ISA bus using I/O port, memory mapped or indirect access.
 12
 13config CAN_SJA1000_PLATFORM
 14	tristate "Generic Platform Bus based SJA1000 driver"
 15	---help---
 16	  This driver adds support for the SJA1000 chips connected to
 17	  the "platform bus" (Linux abstraction for directly to the
 18	  processor attached devices).  Which can be found on various
 19	  boards from Phytec (http://www.phytec.de) like the PCM027,
 20	  PCM038. It also provides the OpenFirmware "platform bus" found
 21	  on embedded systems with OpenFirmware bindings, e.g. if you
 22	  have a PowerPC based system you may want to enable this option.
 23
 24config CAN_EMS_PCMCIA
 25	tristate "EMS CPC-CARD Card"
 26	depends on PCMCIA
 27	---help---
 28	  This driver is for the one or two channel CPC-CARD cards from
 29	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 30
 31config CAN_EMS_PCI
 32	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
 33	depends on PCI
 34	---help---
 35	  This driver is for the one, two or four channel CPC-PCI,
 36	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
 37	  (http://www.ems-wuensche.de).
 
 
 38
 39config CAN_PEAK_PCMCIA
 40	tristate "PEAK PCAN-PC Card"
 41	depends on PCMCIA
 42	depends on HAS_IOPORT_MAP
 43	---help---
 44	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
 45	  from PEAK-System (http://www.peak-system.com). To compile this
 46	  driver as a module, choose M here: the module will be called
 47	  peak_pcmcia.
 48
 49config CAN_PEAK_PCI
 50	tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
 51	depends on PCI
 52	---help---
 53	  This driver is for the PCAN-PCI/PCIe/miniPCI cards
 54	  (1, 2, 3 or 4 channels) from PEAK-System Technik
 55	  (http://www.peak-system.com).
 56
 57config CAN_PEAK_PCIEC
 58	bool "PEAK PCAN-ExpressCard Cards"
 59	depends on CAN_PEAK_PCI
 60	select I2C
 61	select I2C_ALGOBIT
 62	default y
 63	---help---
 64	  Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
 65	  Technik. This will also automatically select I2C and I2C_ALGO
 66	  configuration options.
 67
 68config CAN_KVASER_PCI
 69	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
 70	depends on PCI
 71	---help---
 72	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
 73	  4 channel) from Kvaser (http://www.kvaser.com).
 
 
 
 74
 75config CAN_PLX_PCI
 76	tristate "PLX90xx PCI-bridge based Cards"
 77	depends on PCI
 78	---help---
 79	  This driver is for CAN interface cards based on
 80	  the PLX90xx PCI bridge.
 81	  Driver supports now:
 82	   - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
 83	   - Adlink PCI-7841/cPCI-7841 SE card
 84	   - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
 85	   - esd CAN-PCI/PMC/266
 86	   - esd CAN-PCIe/2000
 87	   - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
 88	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
 89	   - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
 90	   - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 91
 92config CAN_TSCAN1
 93	tristate "TS-CAN1 PC104 boards"
 94	depends on ISA
 95	help
 96	  This driver is for Technologic Systems' TSCAN-1 PC104 boards.
 97	  http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
 98	  The driver supports multiple boards and automatically configures them:
 99	  PLD IO base addresses are read from jumpers JP1 and JP2,
100	  IRQ numbers are read from jumpers JP4 and JP5,
101	  SJA1000 IO base addresses are chosen heuristically (first that works).
102
103endif