Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2
3menuconfig CAN_SJA1000
4 tristate "Philips/NXP SJA1000 devices"
5 depends on HAS_IOMEM
6
7if CAN_SJA1000
8
9config CAN_EMS_PCI
10 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
11 depends on PCI
12 help
13 This driver is for the one, two or four channel CPC-PCI,
14 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
15 (http://www.ems-wuensche.de).
16
17config CAN_EMS_PCMCIA
18 tristate "EMS CPC-CARD Card"
19 depends on PCMCIA
20 help
21 This driver is for the one or two channel CPC-CARD cards from
22 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
23
24config CAN_F81601
25 tristate "Fintek F81601 PCIE to 2 CAN Controller"
26 depends on PCI
27 help
28 This driver adds support for Fintek F81601 PCIE to 2 CAN
29 Controller. It had internal 24MHz clock source, but it can
30 be changed by manufacturer. Use modinfo to get usage for
31 parameters. Visit http://www.fintek.com.tw to get more
32 information.
33
34config CAN_KVASER_PCI
35 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
36 depends on PCI
37 help
38 This driver is for the PCIcanx and PCIcan cards (1, 2 or
39 4 channel) from Kvaser (http://www.kvaser.com).
40
41config CAN_PEAK_PCI
42 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
43 depends on PCI
44 help
45 This driver is for the PCAN-PCI/PCIe/miniPCI cards
46 (1, 2, 3 or 4 channels) from PEAK-System Technik
47 (http://www.peak-system.com).
48
49config CAN_PEAK_PCIEC
50 bool "PEAK PCAN-ExpressCard Cards"
51 depends on CAN_PEAK_PCI
52 select I2C
53 select I2C_ALGOBIT
54 default y
55 help
56 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
57 Technik. This will also automatically select I2C and I2C_ALGO
58 configuration options.
59
60config CAN_PEAK_PCMCIA
61 tristate "PEAK PCAN-PC Card"
62 depends on PCMCIA
63 depends on HAS_IOPORT_MAP
64 help
65 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
66 from PEAK-System (http://www.peak-system.com). To compile this
67 driver as a module, choose M here: the module will be called
68 peak_pcmcia.
69
70config CAN_PLX_PCI
71 tristate "PLX90xx PCI-bridge based Cards"
72 depends on PCI
73 help
74 This driver is for CAN interface cards based on
75 the PLX90xx PCI bridge.
76 Driver supports now:
77 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
78 - Adlink PCI-7841/cPCI-7841 SE card
79 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
80 - esd CAN-PCI/PMC/266
81 - esd CAN-PCIe/2000
82 - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
83 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
84 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
85 - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
86 - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
87
88config CAN_SJA1000_ISA
89 tristate "ISA Bus based legacy SJA1000 driver"
90 help
91 This driver adds legacy support for SJA1000 chips connected to
92 the ISA bus using I/O port, memory mapped or indirect access.
93
94config CAN_SJA1000_PLATFORM
95 tristate "Generic Platform Bus based SJA1000 driver"
96 help
97 This driver adds support for the SJA1000 chips connected to
98 the "platform bus" (Linux abstraction for directly to the
99 processor attached devices). Which can be found on various
100 boards from Phytec (http://www.phytec.de) like the PCM027,
101 PCM038. It also provides the OpenFirmware "platform bus" found
102 on embedded systems with OpenFirmware bindings, e.g. if you
103 have a PowerPC based system you may want to enable this option.
104
105config CAN_TSCAN1
106 tristate "TS-CAN1 PC104 boards"
107 depends on ISA
108 help
109 This driver is for Technologic Systems' TSCAN-1 PC104 boards.
110 https://www.embeddedts.com/products/TS-CAN1
111 The driver supports multiple boards and automatically configures them:
112 PLD IO base addresses are read from jumpers JP1 and JP2,
113 IRQ numbers are read from jumpers JP4 and JP5,
114 SJA1000 IO base addresses are chosen heuristically (first that works).
115
116endif
1menuconfig CAN_SJA1000
2 tristate "Philips/NXP SJA1000 devices"
3 depends on CAN_DEV && HAS_IOMEM
4
5if CAN_SJA1000
6
7config CAN_SJA1000_ISA
8 tristate "ISA Bus based legacy SJA1000 driver"
9 ---help---
10 This driver adds legacy support for SJA1000 chips connected to
11 the ISA bus using I/O port, memory mapped or indirect access.
12
13config CAN_SJA1000_PLATFORM
14 tristate "Generic Platform Bus based SJA1000 driver"
15 ---help---
16 This driver adds support for the SJA1000 chips connected to
17 the "platform bus" (Linux abstraction for directly to the
18 processor attached devices). Which can be found on various
19 boards from Phytec (http://www.phytec.de) like the PCM027,
20 PCM038.
21
22config CAN_SJA1000_OF_PLATFORM
23 tristate "Generic OF Platform Bus based SJA1000 driver"
24 depends on PPC_OF
25 ---help---
26 This driver adds support for the SJA1000 chips connected to
27 the OpenFirmware "platform bus" found on embedded systems with
28 OpenFirmware bindings, e.g. if you have a PowerPC based system
29 you may want to enable this option.
30
31config CAN_EMS_PCMCIA
32 tristate "EMS CPC-CARD Card"
33 depends on PCMCIA
34 ---help---
35 This driver is for the one or two channel CPC-CARD cards from
36 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
37
38config CAN_EMS_PCI
39 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
40 depends on PCI
41 ---help---
42 This driver is for the one, two or four channel CPC-PCI,
43 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
44 (http://www.ems-wuensche.de).
45
46config CAN_PEAK_PCMCIA
47 tristate "PEAK PCAN-PC Card"
48 depends on PCMCIA
49 ---help---
50 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
51 from PEAK-System (http://www.peak-system.com). To compile this
52 driver as a module, choose M here: the module will be called
53 peak_pcmcia.
54
55config CAN_PEAK_PCI
56 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
57 depends on PCI
58 ---help---
59 This driver is for the PCAN-PCI/PCIe/miniPCI cards
60 (1, 2, 3 or 4 channels) from PEAK-System Technik
61 (http://www.peak-system.com).
62
63config CAN_PEAK_PCIEC
64 bool "PEAK PCAN-ExpressCard Cards"
65 depends on CAN_PEAK_PCI
66 select I2C
67 select I2C_ALGOBIT
68 default y
69 ---help---
70 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
71 Technik. This will also automatically select I2C and I2C_ALGO
72 configuration options.
73
74config CAN_KVASER_PCI
75 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
76 depends on PCI
77 ---help---
78 This driver is for the PCIcanx and PCIcan cards (1, 2 or
79 4 channel) from Kvaser (http://www.kvaser.com).
80
81config CAN_PLX_PCI
82 tristate "PLX90xx PCI-bridge based Cards"
83 depends on PCI
84 ---help---
85 This driver is for CAN interface cards based on
86 the PLX90xx PCI bridge.
87 Driver supports now:
88 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
89 - Adlink PCI-7841/cPCI-7841 SE card
90 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
91 - esd CAN-PCI/PMC/266
92 - esd CAN-PCIe/2000
93 - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
94 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
95 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
96
97config CAN_TSCAN1
98 tristate "TS-CAN1 PC104 boards"
99 depends on ISA
100 help
101 This driver is for Technologic Systems' TSCAN-1 PC104 boards.
102 http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
103 The driver supports multiple boards and automatically configures them:
104 PLD IO base addresses are read from jumpers JP1 and JP2,
105 IRQ numbers are read from jumpers JP4 and JP5,
106 SJA1000 IO base addresses are chosen heuristically (first that works).
107
108endif