Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright 2000-2020 Broadcom Inc. All rights reserved.
4 *
5 *
6 * Name: mpi2_ioc.h
7 * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
8 * Creation Date: October 11, 2006
9 *
10 * mpi2_ioc.h Version: 02.00.37
11 *
12 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
13 * prefix are for use only on MPI v2.5 products, and must not be used
14 * with MPI v2.0 products. Unless otherwise noted, names beginning with
15 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
16 *
17 * Version History
18 * ---------------
19 *
20 * Date Version Description
21 * -------- -------- ------------------------------------------------------
22 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
23 * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
24 * MaxTargets.
25 * Added TotalImageSize field to FWDownload Request.
26 * Added reserved words to FWUpload Request.
27 * 06-26-07 02.00.02 Added IR Configuration Change List Event.
28 * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
29 * request and replaced it with
30 * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
31 * Replaced the MinReplyQueueDepth field of the IOCFacts
32 * reply with MaxReplyDescriptorPostQueueDepth.
33 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
34 * depth for the Reply Descriptor Post Queue.
35 * Added SASAddress field to Initiator Device Table
36 * Overflow Event data.
37 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
38 * for SAS Initiator Device Status Change Event data.
39 * Modified Reason Code defines for SAS Topology Change
40 * List Event data, including adding a bit for PHY Vacant
41 * status, and adding a mask for the Reason Code.
42 * Added define for
43 * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
44 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
45 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
46 * the IOCFacts Reply.
47 * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
48 * Moved MPI2_VERSION_UNION to mpi2.h.
49 * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
50 * instead of enables, and added SASBroadcastPrimitiveMasks
51 * field.
52 * Added Log Entry Added Event and related structure.
53 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
54 * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
55 * Added MaxVolumes and MaxPersistentEntries fields to
56 * IOCFacts reply.
57 * Added ProtocalFlags and IOCCapabilities fields to
58 * MPI2_FW_IMAGE_HEADER.
59 * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
60 * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
61 * a U16 (from a U32).
62 * Removed extra 's' from EventMasks name.
63 * 06-27-08 02.00.08 Fixed an offset in a comment.
64 * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
65 * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
66 * renamed MinReplyFrameSize to ReplyFrameSize.
67 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
68 * Added two new RAIDOperation values for Integrated RAID
69 * Operations Status Event data.
70 * Added four new IR Configuration Change List Event data
71 * ReasonCode values.
72 * Added two new ReasonCode defines for SAS Device Status
73 * Change Event data.
74 * Added three new DiscoveryStatus bits for the SAS
75 * Discovery event data.
76 * Added Multiplexing Status Change bit to the PhyStatus
77 * field of the SAS Topology Change List event data.
78 * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
79 * BootFlags are now product-specific.
80 * Added defines for the indivdual signature bytes
81 * for MPI2_INIT_IMAGE_FOOTER.
82 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
83 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
84 * define.
85 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
86 * define.
87 * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
88 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
89 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
90 * Added two new reason codes for SAS Device Status Change
91 * Event.
92 * Added new event: SAS PHY Counter.
93 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
94 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
95 * Added new product id family for 2208.
96 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
97 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
98 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
99 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
100 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
101 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
102 * Added Host Based Discovery Phy Event data.
103 * Added defines for ProductID Product field
104 * (MPI2_FW_HEADER_PID_).
105 * Modified values for SAS ProductID Family
106 * (MPI2_FW_HEADER_PID_FAMILY_).
107 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
108 * Added PowerManagementControl Request structures and
109 * defines.
110 * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
111 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
112 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
113 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
114 * SASNotifyPrimitiveMasks field to
115 * MPI2_EVENT_NOTIFICATION_REQUEST.
116 * Added Temperature Threshold Event.
117 * Added Host Message Event.
118 * Added Send Host Message request and reply.
119 * 05-25-11 02.00.18 For Extended Image Header, added
120 * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
121 * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
122 * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
123 * 08-24-11 02.00.19 Added PhysicalPort field to
124 * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
125 * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
126 * 11-18-11 02.00.20 Incorporating additions for MPI v2.5.
127 * 03-29-12 02.00.21 Added a product specific range to event values.
128 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
129 * Added ElapsedSeconds field to
130 * MPI2_EVENT_DATA_IR_OPERATION_STATUS.
131 * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
132 * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
133 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
134 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
135 * Added Encrypted Hash Extended Image.
136 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
137 * 11-18-14 02.00.25 Updated copyright information.
138 * 03-16-15 02.00.26 Updated for MPI v2.6.
139 * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
140 * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT.
141 * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
142 * MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
143 * Added MPI26_CTRL_OP_SHUTDOWN.
144 * 08-25-15 02.00.27 Added IC ARCH Class based signature defines.
145 * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
146 * Added ConigurationFlags field to IOCInit message to
147 * support NVMe SGL format control.
148 * Added PCIe SRIOV support.
149 * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support.
150 * Added PCIe 4 16.0 GT/sec speec support.
151 * Removed AHCI support.
152 * Removed SOP support.
153 * 07-01-16 02.00.29 Added Archclass for 4008 product.
154 * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED
155 * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload
156 * Request Message.
157 * Added new defines for the ImageType field of FWUpload
158 * Request Message.
159 * Added new values for the RegionType field in the Layout
160 * Data sections of the FLASH Layout Extended Image Data.
161 * Added new defines for the ReasonCode field of
162 * Active Cable Exception Event.
163 * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
164 * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE.
165 * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
166 * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR.
167 * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
168 * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
169 * defines for the ReasonCode field.
170 * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD.
171 * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED
172 * to the ReasonCode field in PCIe Device Status Change
173 * Event Data.
174 * 07-22-18 02.00.35 Added FW_DOWNLOAD_ITYPE_CPLD and _PSOC.
175 * Moved FW image definitions ionto new mpi2_image,h
176 * 08-14-18 02.00.36 Fixed definition of MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16)
177 * 09-07-18 02.00.37 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES
178 * 10-02-19 02.00.38 Added MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE
179 * Added MPI26_IOCFACTS_CAPABILITY_COREDUMP_ENABLED
180 * Added MPI2_FW_DOWNLOAD_ITYPE_COREDUMP
181 * Added MPI2_FW_UPLOAD_ITYPE_COREDUMP
182 * --------------------------------------------------------------------------
183 */
184
185#ifndef MPI2_IOC_H
186#define MPI2_IOC_H
187
188/*****************************************************************************
189*
190* IOC Messages
191*
192*****************************************************************************/
193
194/****************************************************************************
195* IOCInit message
196****************************************************************************/
197
198/*IOCInit Request message */
199typedef struct _MPI2_IOC_INIT_REQUEST {
200 U8 WhoInit; /*0x00 */
201 U8 Reserved1; /*0x01 */
202 U8 ChainOffset; /*0x02 */
203 U8 Function; /*0x03 */
204 U16 Reserved2; /*0x04 */
205 U8 Reserved3; /*0x06 */
206 U8 MsgFlags; /*0x07 */
207 U8 VP_ID; /*0x08 */
208 U8 VF_ID; /*0x09 */
209 U16 Reserved4; /*0x0A */
210 U16 MsgVersion; /*0x0C */
211 U16 HeaderVersion; /*0x0E */
212 U32 Reserved5; /*0x10 */
213 U16 ConfigurationFlags; /* 0x14 */
214 U8 HostPageSize; /*0x16 */
215 U8 HostMSIxVectors; /*0x17 */
216 U16 Reserved8; /*0x18 */
217 U16 SystemRequestFrameSize; /*0x1A */
218 U16 ReplyDescriptorPostQueueDepth; /*0x1C */
219 U16 ReplyFreeQueueDepth; /*0x1E */
220 U32 SenseBufferAddressHigh; /*0x20 */
221 U32 SystemReplyAddressHigh; /*0x24 */
222 U64 SystemRequestFrameBaseAddress; /*0x28 */
223 U64 ReplyDescriptorPostQueueAddress; /*0x30 */
224 U64 ReplyFreeQueueAddress; /*0x38 */
225 U64 TimeStamp; /*0x40 */
226} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST,
227 Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t;
228
229/*WhoInit values */
230#define MPI2_WHOINIT_NOT_INITIALIZED (0x00)
231#define MPI2_WHOINIT_SYSTEM_BIOS (0x01)
232#define MPI2_WHOINIT_ROM_BIOS (0x02)
233#define MPI2_WHOINIT_PCI_PEER (0x03)
234#define MPI2_WHOINIT_HOST_DRIVER (0x04)
235#define MPI2_WHOINIT_MANUFACTURER (0x05)
236
237/* MsgFlags */
238#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01)
239
240
241/*MsgVersion */
242#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00)
243#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8)
244#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF)
245#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0)
246
247/*HeaderVersion */
248#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00)
249#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8)
250#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
251#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
252
253/*ConfigurationFlags */
254#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001)
255#define MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE (0x0002)
256
257/*minimum depth for a Reply Descriptor Post Queue */
258#define MPI2_RDPQ_DEPTH_MIN (16)
259
260/* Reply Descriptor Post Queue Array Entry */
261typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
262 U64 RDPQBaseAddress; /* 0x00 */
263 U32 Reserved1; /* 0x08 */
264 U32 Reserved2; /* 0x0C */
265} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
266*PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
267Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry;
268
269
270/*IOCInit Reply message */
271typedef struct _MPI2_IOC_INIT_REPLY {
272 U8 WhoInit; /*0x00 */
273 U8 Reserved1; /*0x01 */
274 U8 MsgLength; /*0x02 */
275 U8 Function; /*0x03 */
276 U16 Reserved2; /*0x04 */
277 U8 Reserved3; /*0x06 */
278 U8 MsgFlags; /*0x07 */
279 U8 VP_ID; /*0x08 */
280 U8 VF_ID; /*0x09 */
281 U16 Reserved4; /*0x0A */
282 U16 Reserved5; /*0x0C */
283 U16 IOCStatus; /*0x0E */
284 U32 IOCLogInfo; /*0x10 */
285} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY,
286 Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t;
287
288/****************************************************************************
289* IOCFacts message
290****************************************************************************/
291
292/*IOCFacts Request message */
293typedef struct _MPI2_IOC_FACTS_REQUEST {
294 U16 Reserved1; /*0x00 */
295 U8 ChainOffset; /*0x02 */
296 U8 Function; /*0x03 */
297 U16 Reserved2; /*0x04 */
298 U8 Reserved3; /*0x06 */
299 U8 MsgFlags; /*0x07 */
300 U8 VP_ID; /*0x08 */
301 U8 VF_ID; /*0x09 */
302 U16 Reserved4; /*0x0A */
303} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST,
304 Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t;
305
306/*IOCFacts Reply message */
307typedef struct _MPI2_IOC_FACTS_REPLY {
308 U16 MsgVersion; /*0x00 */
309 U8 MsgLength; /*0x02 */
310 U8 Function; /*0x03 */
311 U16 HeaderVersion; /*0x04 */
312 U8 IOCNumber; /*0x06 */
313 U8 MsgFlags; /*0x07 */
314 U8 VP_ID; /*0x08 */
315 U8 VF_ID; /*0x09 */
316 U16 Reserved1; /*0x0A */
317 U16 IOCExceptions; /*0x0C */
318 U16 IOCStatus; /*0x0E */
319 U32 IOCLogInfo; /*0x10 */
320 U8 MaxChainDepth; /*0x14 */
321 U8 WhoInit; /*0x15 */
322 U8 NumberOfPorts; /*0x16 */
323 U8 MaxMSIxVectors; /*0x17 */
324 U16 RequestCredit; /*0x18 */
325 U16 ProductID; /*0x1A */
326 U32 IOCCapabilities; /*0x1C */
327 MPI2_VERSION_UNION FWVersion; /*0x20 */
328 U16 IOCRequestFrameSize; /*0x24 */
329 U16 IOCMaxChainSegmentSize; /*0x26 */
330 U16 MaxInitiators; /*0x28 */
331 U16 MaxTargets; /*0x2A */
332 U16 MaxSasExpanders; /*0x2C */
333 U16 MaxEnclosures; /*0x2E */
334 U16 ProtocolFlags; /*0x30 */
335 U16 HighPriorityCredit; /*0x32 */
336 U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */
337 U8 ReplyFrameSize; /*0x36 */
338 U8 MaxVolumes; /*0x37 */
339 U16 MaxDevHandle; /*0x38 */
340 U16 MaxPersistentEntries; /*0x3A */
341 U16 MinDevHandle; /*0x3C */
342 U8 CurrentHostPageSize; /* 0x3E */
343 U8 Reserved4; /* 0x3F */
344 U8 SGEModifierMask; /*0x40 */
345 U8 SGEModifierValue; /*0x41 */
346 U8 SGEModifierShift; /*0x42 */
347 U8 Reserved5; /*0x43 */
348} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
349 Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
350
351/*MsgVersion */
352#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
353#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8)
354#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
355#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0)
356
357/*HeaderVersion */
358#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00)
359#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8)
360#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF)
361#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
362
363/*IOCExceptions */
364#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400)
365#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
366#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
367
368#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
369#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000)
370#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020)
371#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040)
372#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060)
373
374#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
375#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008)
376#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
377#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
378#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
379
380/*defines for WhoInit field are after the IOCInit Request */
381
382/*ProductID field uses MPI2_FW_HEADER_PID_ */
383
384/*IOCCapabilities */
385#define MPI26_IOCFACTS_CAPABILITY_COREDUMP_ENABLED (0x00200000)
386#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000)
387#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000)
388#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
389#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
390#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
391#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
392#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
393#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
394#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000)
395#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800)
396#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
397#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080)
398#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040)
399#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
400#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
401#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
402#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
403
404/*ProtocolFlags */
405#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008)
406#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
407#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
408
409/****************************************************************************
410* PortFacts message
411****************************************************************************/
412
413/*PortFacts Request message */
414typedef struct _MPI2_PORT_FACTS_REQUEST {
415 U16 Reserved1; /*0x00 */
416 U8 ChainOffset; /*0x02 */
417 U8 Function; /*0x03 */
418 U16 Reserved2; /*0x04 */
419 U8 PortNumber; /*0x06 */
420 U8 MsgFlags; /*0x07 */
421 U8 VP_ID; /*0x08 */
422 U8 VF_ID; /*0x09 */
423 U16 Reserved3; /*0x0A */
424} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST,
425 Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t;
426
427/*PortFacts Reply message */
428typedef struct _MPI2_PORT_FACTS_REPLY {
429 U16 Reserved1; /*0x00 */
430 U8 MsgLength; /*0x02 */
431 U8 Function; /*0x03 */
432 U16 Reserved2; /*0x04 */
433 U8 PortNumber; /*0x06 */
434 U8 MsgFlags; /*0x07 */
435 U8 VP_ID; /*0x08 */
436 U8 VF_ID; /*0x09 */
437 U16 Reserved3; /*0x0A */
438 U16 Reserved4; /*0x0C */
439 U16 IOCStatus; /*0x0E */
440 U32 IOCLogInfo; /*0x10 */
441 U8 Reserved5; /*0x14 */
442 U8 PortType; /*0x15 */
443 U16 Reserved6; /*0x16 */
444 U16 MaxPostedCmdBuffers; /*0x18 */
445 U16 Reserved7; /*0x1A */
446} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY,
447 Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t;
448
449/*PortType values */
450#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00)
451#define MPI2_PORTFACTS_PORTTYPE_FC (0x10)
452#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
453#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
454#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
455#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40)
456
457
458/****************************************************************************
459* PortEnable message
460****************************************************************************/
461
462/*PortEnable Request message */
463typedef struct _MPI2_PORT_ENABLE_REQUEST {
464 U16 Reserved1; /*0x00 */
465 U8 ChainOffset; /*0x02 */
466 U8 Function; /*0x03 */
467 U8 Reserved2; /*0x04 */
468 U8 PortFlags; /*0x05 */
469 U8 Reserved3; /*0x06 */
470 U8 MsgFlags; /*0x07 */
471 U8 VP_ID; /*0x08 */
472 U8 VF_ID; /*0x09 */
473 U16 Reserved4; /*0x0A */
474} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST,
475 Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t;
476
477/*PortEnable Reply message */
478typedef struct _MPI2_PORT_ENABLE_REPLY {
479 U16 Reserved1; /*0x00 */
480 U8 MsgLength; /*0x02 */
481 U8 Function; /*0x03 */
482 U8 Reserved2; /*0x04 */
483 U8 PortFlags; /*0x05 */
484 U8 Reserved3; /*0x06 */
485 U8 MsgFlags; /*0x07 */
486 U8 VP_ID; /*0x08 */
487 U8 VF_ID; /*0x09 */
488 U16 Reserved4; /*0x0A */
489 U16 Reserved5; /*0x0C */
490 U16 IOCStatus; /*0x0E */
491 U32 IOCLogInfo; /*0x10 */
492} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY,
493 Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t;
494
495/****************************************************************************
496* EventNotification message
497****************************************************************************/
498
499/*EventNotification Request message */
500#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4)
501
502typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST {
503 U16 Reserved1; /*0x00 */
504 U8 ChainOffset; /*0x02 */
505 U8 Function; /*0x03 */
506 U16 Reserved2; /*0x04 */
507 U8 Reserved3; /*0x06 */
508 U8 MsgFlags; /*0x07 */
509 U8 VP_ID; /*0x08 */
510 U8 VF_ID; /*0x09 */
511 U16 Reserved4; /*0x0A */
512 U32 Reserved5; /*0x0C */
513 U32 Reserved6; /*0x10 */
514 U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */
515 U16 SASBroadcastPrimitiveMasks; /*0x24 */
516 U16 SASNotifyPrimitiveMasks; /*0x26 */
517 U32 Reserved8; /*0x28 */
518} MPI2_EVENT_NOTIFICATION_REQUEST,
519 *PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
520 Mpi2EventNotificationRequest_t,
521 *pMpi2EventNotificationRequest_t;
522
523/*EventNotification Reply message */
524typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
525 U16 EventDataLength; /*0x00 */
526 U8 MsgLength; /*0x02 */
527 U8 Function; /*0x03 */
528 U16 Reserved1; /*0x04 */
529 U8 AckRequired; /*0x06 */
530 U8 MsgFlags; /*0x07 */
531 U8 VP_ID; /*0x08 */
532 U8 VF_ID; /*0x09 */
533 U16 Reserved2; /*0x0A */
534 U16 Reserved3; /*0x0C */
535 U16 IOCStatus; /*0x0E */
536 U32 IOCLogInfo; /*0x10 */
537 U16 Event; /*0x14 */
538 U16 Reserved4; /*0x16 */
539 U32 EventContext; /*0x18 */
540 U32 EventData[]; /*0x1C */
541} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY,
542 Mpi2EventNotificationReply_t,
543 *pMpi2EventNotificationReply_t;
544
545/*AckRequired */
546#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
547#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01)
548
549/*Event */
550#define MPI2_EVENT_LOG_DATA (0x0001)
551#define MPI2_EVENT_STATE_CHANGE (0x0002)
552#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005)
553#define MPI2_EVENT_EVENT_CHANGE (0x000A)
554#define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */
555#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F)
556#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014)
557#define MPI2_EVENT_SAS_DISCOVERY (0x0016)
558#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017)
559#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018)
560#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
561#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
562#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
563#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D)
564#define MPI2_EVENT_IR_VOLUME (0x001E)
565#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
566#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
567#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
568#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
569#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
570#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
571#define MPI2_EVENT_SAS_QUIESCE (0x0025)
572#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
573#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
574#define MPI2_EVENT_HOST_MESSAGE (0x0028)
575#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
576#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030)
577#define MPI2_EVENT_PCIE_ENUMERATION (0x0031)
578#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032)
579#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033)
580#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034)
581#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035)
582#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
583#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
584
585/*Log Entry Added Event data */
586
587/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
588#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C)
589
590typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED {
591 U64 TimeStamp; /*0x00 */
592 U32 Reserved1; /*0x08 */
593 U16 LogSequence; /*0x0C */
594 U16 LogEntryQualifier; /*0x0E */
595 U8 VP_ID; /*0x10 */
596 U8 VF_ID; /*0x11 */
597 U16 Reserved2; /*0x12 */
598 U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */
599} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
600 *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
601 Mpi2EventDataLogEntryAdded_t,
602 *pMpi2EventDataLogEntryAdded_t;
603
604/*GPIO Interrupt Event data */
605
606typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
607 U8 GPIONum; /*0x00 */
608 U8 Reserved1; /*0x01 */
609 U16 Reserved2; /*0x02 */
610} MPI2_EVENT_DATA_GPIO_INTERRUPT,
611 *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
612 Mpi2EventDataGpioInterrupt_t,
613 *pMpi2EventDataGpioInterrupt_t;
614
615/*Temperature Threshold Event data */
616
617typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
618 U16 Status; /*0x00 */
619 U8 SensorNum; /*0x02 */
620 U8 Reserved1; /*0x03 */
621 U16 CurrentTemperature; /*0x04 */
622 U16 Reserved2; /*0x06 */
623 U32 Reserved3; /*0x08 */
624 U32 Reserved4; /*0x0C */
625} MPI2_EVENT_DATA_TEMPERATURE,
626 *PTR_MPI2_EVENT_DATA_TEMPERATURE,
627 Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t;
628
629/*Temperature Threshold Event data Status bits */
630#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
631#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
632#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
633#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
634
635/*Host Message Event data */
636
637typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
638 U8 SourceVF_ID; /*0x00 */
639 U8 Reserved1; /*0x01 */
640 U16 Reserved2; /*0x02 */
641 U32 Reserved3; /*0x04 */
642 U32 HostData[]; /*0x08 */
643} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
644 Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t;
645
646/*Power Performance Change Event data */
647
648typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
649 U8 CurrentPowerMode; /*0x00 */
650 U8 PreviousPowerMode; /*0x01 */
651 U16 Reserved1; /*0x02 */
652} MPI2_EVENT_DATA_POWER_PERF_CHANGE,
653 *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE,
654 Mpi2EventDataPowerPerfChange_t,
655 *pMpi2EventDataPowerPerfChange_t;
656
657/*defines for CurrentPowerMode and PreviousPowerMode fields */
658#define MPI2_EVENT_PM_INIT_MASK (0xC0)
659#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00)
660#define MPI2_EVENT_PM_INIT_HOST (0x40)
661#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80)
662#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0)
663
664#define MPI2_EVENT_PM_MODE_MASK (0x07)
665#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00)
666#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01)
667#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04)
668#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05)
669#define MPI2_EVENT_PM_MODE_STANDBY (0x06)
670
671/* Active Cable Exception Event data */
672
673typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
674 U32 ActiveCablePowerRequirement; /* 0x00 */
675 U8 ReasonCode; /* 0x04 */
676 U8 ReceptacleID; /* 0x05 */
677 U16 Reserved1; /* 0x06 */
678} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
679 *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
680 Mpi25EventDataActiveCableExcept_t,
681 *pMpi25EventDataActiveCableExcept_t,
682 MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
683 *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
684 Mpi26EventDataActiveCableExcept_t,
685 *pMpi26EventDataActiveCableExcept_t;
686
687/*MPI2.5 defines for the ReasonCode field */
688#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
689#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01)
690#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
691
692/* defines for ReasonCode field */
693#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
694#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01)
695#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
696
697/*Hard Reset Received Event data */
698
699typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED {
700 U8 Reserved1; /*0x00 */
701 U8 Port; /*0x01 */
702 U16 Reserved2; /*0x02 */
703} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
704 *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
705 Mpi2EventDataHardResetReceived_t,
706 *pMpi2EventDataHardResetReceived_t;
707
708/*Task Set Full Event data */
709/* this event is obsolete */
710
711typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL {
712 U16 DevHandle; /*0x00 */
713 U16 CurrentDepth; /*0x02 */
714} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
715 Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t;
716
717/*SAS Device Status Change Event data */
718
719typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE {
720 U16 TaskTag; /*0x00 */
721 U8 ReasonCode; /*0x02 */
722 U8 PhysicalPort; /*0x03 */
723 U8 ASC; /*0x04 */
724 U8 ASCQ; /*0x05 */
725 U16 DevHandle; /*0x06 */
726 U32 Reserved2; /*0x08 */
727 U64 SASAddress; /*0x0C */
728 U8 LUN[8]; /*0x14 */
729} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
730 *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
731 Mpi2EventDataSasDeviceStatusChange_t,
732 *pMpi2EventDataSasDeviceStatusChange_t;
733
734/*SAS Device Status Change Event data ReasonCode values */
735#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
736#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
737#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
738#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
739#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
740#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
741#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
742#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
743#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
744#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
745#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
746#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11)
747#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12)
748
749/*Integrated RAID Operation Status Event data */
750
751typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
752 U16 VolDevHandle; /*0x00 */
753 U16 Reserved1; /*0x02 */
754 U8 RAIDOperation; /*0x04 */
755 U8 PercentComplete; /*0x05 */
756 U16 Reserved2; /*0x06 */
757 U32 ElapsedSeconds; /*0x08 */
758} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
759 *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
760 Mpi2EventDataIrOperationStatus_t,
761 *pMpi2EventDataIrOperationStatus_t;
762
763/*Integrated RAID Operation Status Event data RAIDOperation values */
764#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00)
765#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01)
766#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02)
767#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03)
768#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04)
769
770/*Integrated RAID Volume Event data */
771
772typedef struct _MPI2_EVENT_DATA_IR_VOLUME {
773 U16 VolDevHandle; /*0x00 */
774 U8 ReasonCode; /*0x02 */
775 U8 Reserved1; /*0x03 */
776 U32 NewValue; /*0x04 */
777 U32 PreviousValue; /*0x08 */
778} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME,
779 Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t;
780
781/*Integrated RAID Volume Event data ReasonCode values */
782#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01)
783#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02)
784#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03)
785
786/*Integrated RAID Physical Disk Event data */
787
788typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
789 U16 Reserved1; /*0x00 */
790 U8 ReasonCode; /*0x02 */
791 U8 PhysDiskNum; /*0x03 */
792 U16 PhysDiskDevHandle; /*0x04 */
793 U16 Reserved2; /*0x06 */
794 U16 Slot; /*0x08 */
795 U16 EnclosureHandle; /*0x0A */
796 U32 NewValue; /*0x0C */
797 U32 PreviousValue; /*0x10 */
798} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
799 *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
800 Mpi2EventDataIrPhysicalDisk_t,
801 *pMpi2EventDataIrPhysicalDisk_t;
802
803/*Integrated RAID Physical Disk Event data ReasonCode values */
804#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01)
805#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02)
806#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03)
807
808/*Integrated RAID Configuration Change List Event data */
809
810/*
811 *Host code (drivers, BIOS, utilities, etc.) should check NumElements at
812 *runtime before using ConfigElement[].
813 */
814
815typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
816 U16 ElementFlags; /*0x00 */
817 U16 VolDevHandle; /*0x02 */
818 U8 ReasonCode; /*0x04 */
819 U8 PhysDiskNum; /*0x05 */
820 U16 PhysDiskDevHandle; /*0x06 */
821} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
822 Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t;
823
824/*IR Configuration Change List Event data ElementFlags values */
825#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F)
826#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000)
827#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
828#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002)
829
830/*IR Configuration Change List Event data ReasonCode values */
831#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01)
832#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02)
833#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03)
834#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04)
835#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05)
836#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06)
837#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07)
838#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08)
839#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09)
840
841typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
842 U8 NumElements; /*0x00 */
843 U8 Reserved1; /*0x01 */
844 U8 Reserved2; /*0x02 */
845 U8 ConfigNum; /*0x03 */
846 U32 Flags; /*0x04 */
847 MPI2_EVENT_IR_CONFIG_ELEMENT
848 ConfigElement[];/*0x08 */
849} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
850 *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
851 Mpi2EventDataIrConfigChangeList_t,
852 *pMpi2EventDataIrConfigChangeList_t;
853
854/*IR Configuration Change List Event data Flags values */
855#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001)
856
857/*SAS Discovery Event data */
858
859typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY {
860 U8 Flags; /*0x00 */
861 U8 ReasonCode; /*0x01 */
862 U8 PhysicalPort; /*0x02 */
863 U8 Reserved1; /*0x03 */
864 U32 DiscoveryStatus; /*0x04 */
865} MPI2_EVENT_DATA_SAS_DISCOVERY,
866 *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
867 Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t;
868
869/*SAS Discovery Event data Flags values */
870#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02)
871#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01)
872
873/*SAS Discovery Event data ReasonCode values */
874#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01)
875#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02)
876
877/*SAS Discovery Event data DiscoveryStatus values */
878#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
879#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000)
880#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000)
881#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
882#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000)
883#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
884#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
885#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000)
886#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
887#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800)
888#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400)
889#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200)
890#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100)
891#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080)
892#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040)
893#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020)
894#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010)
895#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004)
896#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002)
897#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001)
898
899/*SAS Broadcast Primitive Event data */
900
901typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE {
902 U8 PhyNum; /*0x00 */
903 U8 Port; /*0x01 */
904 U8 PortWidth; /*0x02 */
905 U8 Primitive; /*0x03 */
906} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
907 *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
908 Mpi2EventDataSasBroadcastPrimitive_t,
909 *pMpi2EventDataSasBroadcastPrimitive_t;
910
911/*defines for the Primitive field */
912#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01)
913#define MPI2_EVENT_PRIMITIVE_SES (0x02)
914#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03)
915#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
916#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05)
917#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06)
918#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
919#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
920
921/*SAS Notify Primitive Event data */
922
923typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
924 U8 PhyNum; /*0x00 */
925 U8 Port; /*0x01 */
926 U8 Reserved1; /*0x02 */
927 U8 Primitive; /*0x03 */
928} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
929 *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
930 Mpi2EventDataSasNotifyPrimitive_t,
931 *pMpi2EventDataSasNotifyPrimitive_t;
932
933/*defines for the Primitive field */
934#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
935#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
936#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
937#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
938
939/*SAS Initiator Device Status Change Event data */
940
941typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE {
942 U8 ReasonCode; /*0x00 */
943 U8 PhysicalPort; /*0x01 */
944 U16 DevHandle; /*0x02 */
945 U64 SASAddress; /*0x04 */
946} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
947 *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
948 Mpi2EventDataSasInitDevStatusChange_t,
949 *pMpi2EventDataSasInitDevStatusChange_t;
950
951/*SAS Initiator Device Status Change event ReasonCode values */
952#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01)
953#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
954
955/*SAS Initiator Device Table Overflow Event data */
956
957typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
958 U16 MaxInit; /*0x00 */
959 U16 CurrentInit; /*0x02 */
960 U64 SASAddress; /*0x04 */
961} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
962 *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
963 Mpi2EventDataSasInitTableOverflow_t,
964 *pMpi2EventDataSasInitTableOverflow_t;
965
966/*SAS Topology Change List Event data */
967
968/*
969 *Host code (drivers, BIOS, utilities, etc.) should check NumEntries at
970 *runtime before using PHY[].
971 */
972
973typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
974 U16 AttachedDevHandle; /*0x00 */
975 U8 LinkRate; /*0x02 */
976 U8 PhyStatus; /*0x03 */
977} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
978 Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t;
979
980typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
981 U16 EnclosureHandle; /*0x00 */
982 U16 ExpanderDevHandle; /*0x02 */
983 U8 NumPhys; /*0x04 */
984 U8 Reserved1; /*0x05 */
985 U16 Reserved2; /*0x06 */
986 U8 NumEntries; /*0x08 */
987 U8 StartPhyNum; /*0x09 */
988 U8 ExpStatus; /*0x0A */
989 U8 PhysicalPort; /*0x0B */
990 MPI2_EVENT_SAS_TOPO_PHY_ENTRY
991 PHY[]; /*0x0C */
992} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
993 *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
994 Mpi2EventDataSasTopologyChangeList_t,
995 *pMpi2EventDataSasTopologyChangeList_t;
996
997/*values for the ExpStatus field */
998#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
999#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01)
1000#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
1001#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
1002#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
1003
1004/*defines for the LinkRate field */
1005#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0)
1006#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
1007#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F)
1008#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
1009
1010#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
1011#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
1012#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
1013#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
1014#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
1015#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
1016#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
1017#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08)
1018#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
1019#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
1020#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
1021#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C)
1022
1023/*values for the PhyStatus field */
1024#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
1025#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10)
1026/*values for the PhyStatus ReasonCode sub-field */
1027#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F)
1028#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01)
1029#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02)
1030#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03)
1031#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04)
1032#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05)
1033
1034/*SAS Enclosure Device Status Change Event data */
1035
1036typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
1037 U16 EnclosureHandle; /*0x00 */
1038 U8 ReasonCode; /*0x02 */
1039 U8 PhysicalPort; /*0x03 */
1040 U64 EnclosureLogicalID; /*0x04 */
1041 U16 NumSlots; /*0x0C */
1042 U16 StartSlot; /*0x0E */
1043 U32 PhyBits; /*0x10 */
1044} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
1045 *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
1046 Mpi2EventDataSasEnclDevStatusChange_t,
1047 *pMpi2EventDataSasEnclDevStatusChange_t,
1048 MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
1049 *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
1050 Mpi26EventDataEnclDevStatusChange_t,
1051 *pMpi26EventDataEnclDevStatusChange_t;
1052
1053/*SAS Enclosure Device Status Change event ReasonCode values */
1054#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
1055#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
1056
1057/*Enclosure Device Status Change event ReasonCode values */
1058#define MPI26_EVENT_ENCL_RC_ADDED (0x01)
1059#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02)
1060
1061
1062typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR {
1063 U16 DevHandle; /*0x00 */
1064 U8 ReasonCode; /*0x02 */
1065 U8 PhysicalPort; /*0x03 */
1066 U32 Reserved1[2]; /*0x04 */
1067 U64 SASAddress; /*0x0C */
1068 U32 Reserved2[2]; /*0x14 */
1069} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
1070 *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
1071 Mpi25EventDataSasDeviceDiscoveryError_t,
1072 *pMpi25EventDataSasDeviceDiscoveryError_t;
1073
1074/*SAS Device Discovery Error Event data ReasonCode values */
1075#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01)
1076#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02)
1077
1078/*SAS PHY Counter Event data */
1079
1080typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
1081 U64 TimeStamp; /*0x00 */
1082 U32 Reserved1; /*0x08 */
1083 U8 PhyEventCode; /*0x0C */
1084 U8 PhyNum; /*0x0D */
1085 U16 Reserved2; /*0x0E */
1086 U32 PhyEventInfo; /*0x10 */
1087 U8 CounterType; /*0x14 */
1088 U8 ThresholdWindow; /*0x15 */
1089 U8 TimeUnits; /*0x16 */
1090 U8 Reserved3; /*0x17 */
1091 U32 EventThreshold; /*0x18 */
1092 U16 ThresholdFlags; /*0x1C */
1093 U16 Reserved4; /*0x1E */
1094} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
1095 *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
1096 Mpi2EventDataSasPhyCounter_t,
1097 *pMpi2EventDataSasPhyCounter_t;
1098
1099/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h
1100 *for the PhyEventCode field */
1101
1102/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h
1103 *for the CounterType field */
1104
1105/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h
1106 *for the TimeUnits field */
1107
1108/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h
1109 *for the ThresholdFlags field */
1110
1111/*SAS Quiesce Event data */
1112
1113typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
1114 U8 ReasonCode; /*0x00 */
1115 U8 Reserved1; /*0x01 */
1116 U16 Reserved2; /*0x02 */
1117 U32 Reserved3; /*0x04 */
1118} MPI2_EVENT_DATA_SAS_QUIESCE,
1119 *PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
1120 Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t;
1121
1122/*SAS Quiesce Event data ReasonCode values */
1123#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01)
1124#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02)
1125
1126/*Host Based Discovery Phy Event data */
1127
1128typedef struct _MPI2_EVENT_HBD_PHY_SAS {
1129 U8 Flags; /*0x00 */
1130 U8 NegotiatedLinkRate; /*0x01 */
1131 U8 PhyNum; /*0x02 */
1132 U8 PhysicalPort; /*0x03 */
1133 U32 Reserved1; /*0x04 */
1134 U8 InitialFrame[28]; /*0x08 */
1135} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS,
1136 Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t;
1137
1138/*values for the Flags field */
1139#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02)
1140#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01)
1141
1142/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h
1143 *for the NegotiatedLinkRate field */
1144
1145typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
1146 MPI2_EVENT_HBD_PHY_SAS Sas;
1147} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR,
1148 Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t;
1149
1150typedef struct _MPI2_EVENT_DATA_HBD_PHY {
1151 U8 DescriptorType; /*0x00 */
1152 U8 Reserved1; /*0x01 */
1153 U16 Reserved2; /*0x02 */
1154 U32 Reserved3; /*0x04 */
1155 MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */
1156} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY,
1157 Mpi2EventDataHbdPhy_t,
1158 *pMpi2EventDataMpi2EventDataHbdPhy_t;
1159
1160/*values for the DescriptorType field */
1161#define MPI2_EVENT_HBD_DT_SAS (0x01)
1162
1163
1164/*PCIe Device Status Change Event data (MPI v2.6 and later) */
1165
1166typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE {
1167 U16 TaskTag; /*0x00 */
1168 U8 ReasonCode; /*0x02 */
1169 U8 PhysicalPort; /*0x03 */
1170 U8 ASC; /*0x04 */
1171 U8 ASCQ; /*0x05 */
1172 U16 DevHandle; /*0x06 */
1173 U32 Reserved2; /*0x08 */
1174 U64 WWID; /*0x0C */
1175 U8 LUN[8]; /*0x14 */
1176} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
1177 *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
1178 Mpi26EventDataPCIeDeviceStatusChange_t,
1179 *pMpi26EventDataPCIeDeviceStatusChange_t;
1180
1181/*PCIe Device Status Change Event data ReasonCode values */
1182#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05)
1183#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07)
1184#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
1185#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
1186#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
1187#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
1188#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
1189#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
1190#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
1191#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
1192#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10)
1193#define MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x11)
1194
1195
1196/*PCIe Enumeration Event data (MPI v2.6 and later) */
1197
1198typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
1199 U8 Flags; /*0x00 */
1200 U8 ReasonCode; /*0x01 */
1201 U8 PhysicalPort; /*0x02 */
1202 U8 Reserved1; /*0x03 */
1203 U32 EnumerationStatus; /*0x04 */
1204} MPI26_EVENT_DATA_PCIE_ENUMERATION,
1205 *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION,
1206 Mpi26EventDataPCIeEnumeration_t,
1207 *pMpi26EventDataPCIeEnumeration_t;
1208
1209/*PCIe Enumeration Event data Flags values */
1210#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02)
1211#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01)
1212
1213/*PCIe Enumeration Event data ReasonCode values */
1214#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01)
1215#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
1216
1217/*PCIe Enumeration Event data EnumerationStatus values */
1218#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
1219#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
1220#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
1221
1222
1223/*PCIe Topology Change List Event data (MPI v2.6 and later) */
1224
1225/*
1226 *Host code (drivers, BIOS, utilities, etc.) should check NumEntries at
1227 *runtime before using PortEntry[].
1228 */
1229
1230typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
1231 U16 AttachedDevHandle; /*0x00 */
1232 U8 PortStatus; /*0x02 */
1233 U8 Reserved1; /*0x03 */
1234 U8 CurrentPortInfo; /*0x04 */
1235 U8 Reserved2; /*0x05 */
1236 U8 PreviousPortInfo; /*0x06 */
1237 U8 Reserved3; /*0x07 */
1238} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
1239 *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
1240 Mpi26EventPCIeTopoPortEntry_t,
1241 *pMpi26EventPCIeTopoPortEntry_t;
1242
1243/*PCIe Topology Change List Event data PortStatus values */
1244#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01)
1245#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
1246#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
1247#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
1248#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
1249
1250/*PCIe Topology Change List Event data defines for CurrentPortInfo and
1251 *PreviousPortInfo
1252 */
1253#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0)
1254#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
1255#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10)
1256#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20)
1257#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30)
1258#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40)
1259#define MPI26_EVENT_PCIE_TOPO_PI_16_LANES (0x50)
1260
1261#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F)
1262#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
1263#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
1264#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
1265#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
1266#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
1267#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
1268
1269typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
1270 U16 EnclosureHandle; /*0x00 */
1271 U16 SwitchDevHandle; /*0x02 */
1272 U8 NumPorts; /*0x04 */
1273 U8 Reserved1; /*0x05 */
1274 U16 Reserved2; /*0x06 */
1275 U8 NumEntries; /*0x08 */
1276 U8 StartPortNum; /*0x09 */
1277 U8 SwitchStatus; /*0x0A */
1278 U8 PhysicalPort; /*0x0B */
1279 MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
1280 PortEntry[]; /*0x0C */
1281} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
1282 *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
1283 Mpi26EventDataPCIeTopologyChangeList_t,
1284 *pMpi26EventDataPCIeTopologyChangeList_t;
1285
1286/*PCIe Topology Change List Event data SwitchStatus values */
1287#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
1288#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01)
1289#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
1290#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
1291#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
1292
1293/*PCIe Link Counter Event data (MPI v2.6 and later) */
1294
1295typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER {
1296 U64 TimeStamp; /*0x00 */
1297 U32 Reserved1; /*0x08 */
1298 U8 LinkEventCode; /*0x0C */
1299 U8 LinkNum; /*0x0D */
1300 U16 Reserved2; /*0x0E */
1301 U32 LinkEventInfo; /*0x10 */
1302 U8 CounterType; /*0x14 */
1303 U8 ThresholdWindow; /*0x15 */
1304 U8 TimeUnits; /*0x16 */
1305 U8 Reserved3; /*0x17 */
1306 U32 EventThreshold; /*0x18 */
1307 U16 ThresholdFlags; /*0x1C */
1308 U16 Reserved4; /*0x1E */
1309} MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
1310 *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
1311 Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t;
1312
1313
1314/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode
1315 *field
1316 */
1317
1318/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType
1319 *field
1320 */
1321
1322/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits
1323 *field
1324 */
1325
1326/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags
1327 *field
1328 */
1329
1330/****************************************************************************
1331* EventAck message
1332****************************************************************************/
1333
1334/*EventAck Request message */
1335typedef struct _MPI2_EVENT_ACK_REQUEST {
1336 U16 Reserved1; /*0x00 */
1337 U8 ChainOffset; /*0x02 */
1338 U8 Function; /*0x03 */
1339 U16 Reserved2; /*0x04 */
1340 U8 Reserved3; /*0x06 */
1341 U8 MsgFlags; /*0x07 */
1342 U8 VP_ID; /*0x08 */
1343 U8 VF_ID; /*0x09 */
1344 U16 Reserved4; /*0x0A */
1345 U16 Event; /*0x0C */
1346 U16 Reserved5; /*0x0E */
1347 U32 EventContext; /*0x10 */
1348} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST,
1349 Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t;
1350
1351/*EventAck Reply message */
1352typedef struct _MPI2_EVENT_ACK_REPLY {
1353 U16 Reserved1; /*0x00 */
1354 U8 MsgLength; /*0x02 */
1355 U8 Function; /*0x03 */
1356 U16 Reserved2; /*0x04 */
1357 U8 Reserved3; /*0x06 */
1358 U8 MsgFlags; /*0x07 */
1359 U8 VP_ID; /*0x08 */
1360 U8 VF_ID; /*0x09 */
1361 U16 Reserved4; /*0x0A */
1362 U16 Reserved5; /*0x0C */
1363 U16 IOCStatus; /*0x0E */
1364 U32 IOCLogInfo; /*0x10 */
1365} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY,
1366 Mpi2EventAckReply_t, *pMpi2EventAckReply_t;
1367
1368/****************************************************************************
1369* SendHostMessage message
1370****************************************************************************/
1371
1372/*SendHostMessage Request message */
1373typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
1374 U16 HostDataLength; /*0x00 */
1375 U8 ChainOffset; /*0x02 */
1376 U8 Function; /*0x03 */
1377 U16 Reserved1; /*0x04 */
1378 U8 Reserved2; /*0x06 */
1379 U8 MsgFlags; /*0x07 */
1380 U8 VP_ID; /*0x08 */
1381 U8 VF_ID; /*0x09 */
1382 U16 Reserved3; /*0x0A */
1383 U8 Reserved4; /*0x0C */
1384 U8 DestVF_ID; /*0x0D */
1385 U16 Reserved5; /*0x0E */
1386 U32 Reserved6; /*0x10 */
1387 U32 Reserved7; /*0x14 */
1388 U32 Reserved8; /*0x18 */
1389 U32 Reserved9; /*0x1C */
1390 U32 Reserved10; /*0x20 */
1391 U32 HostData[]; /*0x24 */
1392} MPI2_SEND_HOST_MESSAGE_REQUEST,
1393 *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
1394 Mpi2SendHostMessageRequest_t,
1395 *pMpi2SendHostMessageRequest_t;
1396
1397/*SendHostMessage Reply message */
1398typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
1399 U16 HostDataLength; /*0x00 */
1400 U8 MsgLength; /*0x02 */
1401 U8 Function; /*0x03 */
1402 U16 Reserved1; /*0x04 */
1403 U8 Reserved2; /*0x06 */
1404 U8 MsgFlags; /*0x07 */
1405 U8 VP_ID; /*0x08 */
1406 U8 VF_ID; /*0x09 */
1407 U16 Reserved3; /*0x0A */
1408 U16 Reserved4; /*0x0C */
1409 U16 IOCStatus; /*0x0E */
1410 U32 IOCLogInfo; /*0x10 */
1411} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
1412 Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t;
1413
1414/****************************************************************************
1415* FWDownload message
1416****************************************************************************/
1417
1418/*MPI v2.0 FWDownload Request message */
1419typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
1420 U8 ImageType; /*0x00 */
1421 U8 Reserved1; /*0x01 */
1422 U8 ChainOffset; /*0x02 */
1423 U8 Function; /*0x03 */
1424 U16 Reserved2; /*0x04 */
1425 U8 Reserved3; /*0x06 */
1426 U8 MsgFlags; /*0x07 */
1427 U8 VP_ID; /*0x08 */
1428 U8 VF_ID; /*0x09 */
1429 U16 Reserved4; /*0x0A */
1430 U32 TotalImageSize; /*0x0C */
1431 U32 Reserved5; /*0x10 */
1432 MPI2_MPI_SGE_UNION SGL; /*0x14 */
1433} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST,
1434 Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest;
1435
1436#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01)
1437
1438#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01)
1439#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02)
1440#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
1441#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
1442#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
1443#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
1444#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
1445#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
1446#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
1447#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D)
1448#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E)
1449#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F)
1450#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10)
1451#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11)
1452#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12)
1453#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13)
1454#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14)
1455/*MPI v2.6 and newer */
1456#define MPI2_FW_DOWNLOAD_ITYPE_CPLD (0x15)
1457#define MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16)
1458#define MPI2_FW_DOWNLOAD_ITYPE_COREDUMP (0x17)
1459#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
1460
1461/*MPI v2.0 FWDownload TransactionContext Element */
1462typedef struct _MPI2_FW_DOWNLOAD_TCSGE {
1463 U8 Reserved1; /*0x00 */
1464 U8 ContextSize; /*0x01 */
1465 U8 DetailsLength; /*0x02 */
1466 U8 Flags; /*0x03 */
1467 U32 Reserved2; /*0x04 */
1468 U32 ImageOffset; /*0x08 */
1469 U32 ImageSize; /*0x0C */
1470} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE,
1471 Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t;
1472
1473/*MPI v2.5 FWDownload Request message */
1474typedef struct _MPI25_FW_DOWNLOAD_REQUEST {
1475 U8 ImageType; /*0x00 */
1476 U8 Reserved1; /*0x01 */
1477 U8 ChainOffset; /*0x02 */
1478 U8 Function; /*0x03 */
1479 U16 Reserved2; /*0x04 */
1480 U8 Reserved3; /*0x06 */
1481 U8 MsgFlags; /*0x07 */
1482 U8 VP_ID; /*0x08 */
1483 U8 VF_ID; /*0x09 */
1484 U16 Reserved4; /*0x0A */
1485 U32 TotalImageSize; /*0x0C */
1486 U32 Reserved5; /*0x10 */
1487 U32 Reserved6; /*0x14 */
1488 U32 ImageOffset; /*0x18 */
1489 U32 ImageSize; /*0x1C */
1490 MPI25_SGE_IO_UNION SGL; /*0x20 */
1491} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST,
1492 Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest;
1493
1494/*FWDownload Reply message */
1495typedef struct _MPI2_FW_DOWNLOAD_REPLY {
1496 U8 ImageType; /*0x00 */
1497 U8 Reserved1; /*0x01 */
1498 U8 MsgLength; /*0x02 */
1499 U8 Function; /*0x03 */
1500 U16 Reserved2; /*0x04 */
1501 U8 Reserved3; /*0x06 */
1502 U8 MsgFlags; /*0x07 */
1503 U8 VP_ID; /*0x08 */
1504 U8 VF_ID; /*0x09 */
1505 U16 Reserved4; /*0x0A */
1506 U16 Reserved5; /*0x0C */
1507 U16 IOCStatus; /*0x0E */
1508 U32 IOCLogInfo; /*0x10 */
1509} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY,
1510 Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t;
1511
1512/****************************************************************************
1513* FWUpload message
1514****************************************************************************/
1515
1516/*MPI v2.0 FWUpload Request message */
1517typedef struct _MPI2_FW_UPLOAD_REQUEST {
1518 U8 ImageType; /*0x00 */
1519 U8 Reserved1; /*0x01 */
1520 U8 ChainOffset; /*0x02 */
1521 U8 Function; /*0x03 */
1522 U16 Reserved2; /*0x04 */
1523 U8 Reserved3; /*0x06 */
1524 U8 MsgFlags; /*0x07 */
1525 U8 VP_ID; /*0x08 */
1526 U8 VF_ID; /*0x09 */
1527 U16 Reserved4; /*0x0A */
1528 U32 Reserved5; /*0x0C */
1529 U32 Reserved6; /*0x10 */
1530 MPI2_MPI_SGE_UNION SGL; /*0x14 */
1531} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST,
1532 Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t;
1533
1534#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00)
1535#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
1536#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
1537#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
1538#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
1539#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
1540#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
1541#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09)
1542#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
1543#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
1544#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D)
1545#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E)
1546#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F)
1547#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10)
1548#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11)
1549#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12)
1550#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13)
1551#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14)
1552
1553
1554/*MPI v2.0 FWUpload TransactionContext Element */
1555typedef struct _MPI2_FW_UPLOAD_TCSGE {
1556 U8 Reserved1; /*0x00 */
1557 U8 ContextSize; /*0x01 */
1558 U8 DetailsLength; /*0x02 */
1559 U8 Flags; /*0x03 */
1560 U32 Reserved2; /*0x04 */
1561 U32 ImageOffset; /*0x08 */
1562 U32 ImageSize; /*0x0C */
1563} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE,
1564 Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t;
1565
1566/*MPI v2.5 FWUpload Request message */
1567typedef struct _MPI25_FW_UPLOAD_REQUEST {
1568 U8 ImageType; /*0x00 */
1569 U8 Reserved1; /*0x01 */
1570 U8 ChainOffset; /*0x02 */
1571 U8 Function; /*0x03 */
1572 U16 Reserved2; /*0x04 */
1573 U8 Reserved3; /*0x06 */
1574 U8 MsgFlags; /*0x07 */
1575 U8 VP_ID; /*0x08 */
1576 U8 VF_ID; /*0x09 */
1577 U16 Reserved4; /*0x0A */
1578 U32 Reserved5; /*0x0C */
1579 U32 Reserved6; /*0x10 */
1580 U32 Reserved7; /*0x14 */
1581 U32 ImageOffset; /*0x18 */
1582 U32 ImageSize; /*0x1C */
1583 MPI25_SGE_IO_UNION SGL; /*0x20 */
1584} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST,
1585 Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t;
1586
1587/*FWUpload Reply message */
1588typedef struct _MPI2_FW_UPLOAD_REPLY {
1589 U8 ImageType; /*0x00 */
1590 U8 Reserved1; /*0x01 */
1591 U8 MsgLength; /*0x02 */
1592 U8 Function; /*0x03 */
1593 U16 Reserved2; /*0x04 */
1594 U8 Reserved3; /*0x06 */
1595 U8 MsgFlags; /*0x07 */
1596 U8 VP_ID; /*0x08 */
1597 U8 VF_ID; /*0x09 */
1598 U16 Reserved4; /*0x0A */
1599 U16 Reserved5; /*0x0C */
1600 U16 IOCStatus; /*0x0E */
1601 U32 IOCLogInfo; /*0x10 */
1602 U32 ActualImageSize; /*0x14 */
1603} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY,
1604 Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t;
1605
1606
1607/****************************************************************************
1608* PowerManagementControl message
1609****************************************************************************/
1610
1611/*PowerManagementControl Request message */
1612typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
1613 U8 Feature; /*0x00 */
1614 U8 Reserved1; /*0x01 */
1615 U8 ChainOffset; /*0x02 */
1616 U8 Function; /*0x03 */
1617 U16 Reserved2; /*0x04 */
1618 U8 Reserved3; /*0x06 */
1619 U8 MsgFlags; /*0x07 */
1620 U8 VP_ID; /*0x08 */
1621 U8 VF_ID; /*0x09 */
1622 U16 Reserved4; /*0x0A */
1623 U8 Parameter1; /*0x0C */
1624 U8 Parameter2; /*0x0D */
1625 U8 Parameter3; /*0x0E */
1626 U8 Parameter4; /*0x0F */
1627 U32 Reserved5; /*0x10 */
1628 U32 Reserved6; /*0x14 */
1629} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
1630 Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t;
1631
1632/*defines for the Feature field */
1633#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01)
1634#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02)
1635#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */
1636#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04)
1637#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05)
1638#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80)
1639#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF)
1640
1641/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
1642/*Parameter1 contains a PHY number */
1643/*Parameter2 indicates power condition action using these defines */
1644#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01)
1645#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02)
1646#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03)
1647/*Parameter3 and Parameter4 are reserved */
1648
1649/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
1650 * Feature */
1651/*Parameter1 contains SAS port width modulation group number */
1652/*Parameter2 indicates IOC action using these defines */
1653#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01)
1654#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02)
1655#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03)
1656/*Parameter3 indicates desired modulation level using these defines */
1657#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00)
1658#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01)
1659#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02)
1660#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03)
1661/*Parameter4 is reserved */
1662
1663/*this next set (_PCIE_LINK) is obsolete */
1664/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
1665/*Parameter1 indicates desired PCIe link speed using these defines */
1666#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */
1667#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */
1668#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */
1669/*Parameter2 indicates desired PCIe link width using these defines */
1670#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */
1671#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */
1672#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */
1673#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */
1674/*Parameter3 and Parameter4 are reserved */
1675
1676/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
1677/*Parameter1 indicates desired IOC hardware clock speed using these defines */
1678#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01)
1679#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02)
1680#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04)
1681#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08)
1682/*Parameter2, Parameter3, and Parameter4 are reserved */
1683
1684/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/
1685/*Parameter1 indicates host action regarding global power management mode */
1686#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01)
1687#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02)
1688#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03)
1689/*Parameter2 indicates the requested global power management mode */
1690#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01)
1691#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08)
1692#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40)
1693/*Parameter3 and Parameter4 are reserved */
1694
1695/*PowerManagementControl Reply message */
1696typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
1697 U8 Feature; /*0x00 */
1698 U8 Reserved1; /*0x01 */
1699 U8 MsgLength; /*0x02 */
1700 U8 Function; /*0x03 */
1701 U16 Reserved2; /*0x04 */
1702 U8 Reserved3; /*0x06 */
1703 U8 MsgFlags; /*0x07 */
1704 U8 VP_ID; /*0x08 */
1705 U8 VF_ID; /*0x09 */
1706 U16 Reserved4; /*0x0A */
1707 U16 Reserved5; /*0x0C */
1708 U16 IOCStatus; /*0x0E */
1709 U32 IOCLogInfo; /*0x10 */
1710} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
1711 Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t;
1712
1713/****************************************************************************
1714* IO Unit Control messages (MPI v2.6 and later only.)
1715****************************************************************************/
1716
1717/* IO Unit Control Request Message */
1718typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
1719 U8 Operation; /* 0x00 */
1720 U8 Reserved1; /* 0x01 */
1721 U8 ChainOffset; /* 0x02 */
1722 U8 Function; /* 0x03 */
1723 U16 DevHandle; /* 0x04 */
1724 U8 IOCParameter; /* 0x06 */
1725 U8 MsgFlags; /* 0x07 */
1726 U8 VP_ID; /* 0x08 */
1727 U8 VF_ID; /* 0x09 */
1728 U16 Reserved3; /* 0x0A */
1729 U16 Reserved4; /* 0x0C */
1730 U8 PhyNum; /* 0x0E */
1731 U8 PrimFlags; /* 0x0F */
1732 U32 Primitive; /* 0x10 */
1733 U8 LookupMethod; /* 0x14 */
1734 U8 Reserved5; /* 0x15 */
1735 U16 SlotNumber; /* 0x16 */
1736 U64 LookupAddress; /* 0x18 */
1737 U32 IOCParameterValue; /* 0x20 */
1738 U32 Reserved7; /* 0x24 */
1739 U32 Reserved8; /* 0x28 */
1740} MPI26_IOUNIT_CONTROL_REQUEST,
1741 *PTR_MPI26_IOUNIT_CONTROL_REQUEST,
1742 Mpi26IoUnitControlRequest_t,
1743 *pMpi26IoUnitControlRequest_t;
1744
1745/* values for the Operation field */
1746#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02)
1747#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06)
1748#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07)
1749#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08)
1750#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09)
1751#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A)
1752#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B)
1753#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D)
1754#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E)
1755#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F)
1756#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10)
1757#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11)
1758#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12)
1759#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13)
1760#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14)
1761#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15)
1762#define MPI26_CTRL_OP_SHUTDOWN (0x16)
1763#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17)
1764#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18)
1765#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19)
1766#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A)
1767#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B)
1768#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80)
1769
1770/* values for the PrimFlags field */
1771#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08)
1772#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02)
1773#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01)
1774
1775/* values for the LookupMethod field */
1776#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
1777#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
1778#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
1779
1780
1781/* IO Unit Control Reply Message */
1782typedef struct _MPI26_IOUNIT_CONTROL_REPLY {
1783 U8 Operation; /* 0x00 */
1784 U8 Reserved1; /* 0x01 */
1785 U8 MsgLength; /* 0x02 */
1786 U8 Function; /* 0x03 */
1787 U16 DevHandle; /* 0x04 */
1788 U8 IOCParameter; /* 0x06 */
1789 U8 MsgFlags; /* 0x07 */
1790 U8 VP_ID; /* 0x08 */
1791 U8 VF_ID; /* 0x09 */
1792 U16 Reserved3; /* 0x0A */
1793 U16 Reserved4; /* 0x0C */
1794 U16 IOCStatus; /* 0x0E */
1795 U32 IOCLogInfo; /* 0x10 */
1796} MPI26_IOUNIT_CONTROL_REPLY,
1797 *PTR_MPI26_IOUNIT_CONTROL_REPLY,
1798 Mpi26IoUnitControlReply_t,
1799 *pMpi26IoUnitControlReply_t;
1800
1801
1802#endif
1/*
2 * Copyright 2000-2015 Avago Technologies. All rights reserved.
3 *
4 *
5 * Name: mpi2_ioc.h
6 * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
7 * Creation Date: October 11, 2006
8 *
9 * mpi2_ioc.h Version: 02.00.27
10 *
11 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
12 * prefix are for use only on MPI v2.5 products, and must not be used
13 * with MPI v2.0 products. Unless otherwise noted, names beginning with
14 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
15 *
16 * Version History
17 * ---------------
18 *
19 * Date Version Description
20 * -------- -------- ------------------------------------------------------
21 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
22 * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
23 * MaxTargets.
24 * Added TotalImageSize field to FWDownload Request.
25 * Added reserved words to FWUpload Request.
26 * 06-26-07 02.00.02 Added IR Configuration Change List Event.
27 * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
28 * request and replaced it with
29 * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
30 * Replaced the MinReplyQueueDepth field of the IOCFacts
31 * reply with MaxReplyDescriptorPostQueueDepth.
32 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
33 * depth for the Reply Descriptor Post Queue.
34 * Added SASAddress field to Initiator Device Table
35 * Overflow Event data.
36 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
37 * for SAS Initiator Device Status Change Event data.
38 * Modified Reason Code defines for SAS Topology Change
39 * List Event data, including adding a bit for PHY Vacant
40 * status, and adding a mask for the Reason Code.
41 * Added define for
42 * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
43 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
44 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
45 * the IOCFacts Reply.
46 * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
47 * Moved MPI2_VERSION_UNION to mpi2.h.
48 * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
49 * instead of enables, and added SASBroadcastPrimitiveMasks
50 * field.
51 * Added Log Entry Added Event and related structure.
52 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
53 * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
54 * Added MaxVolumes and MaxPersistentEntries fields to
55 * IOCFacts reply.
56 * Added ProtocalFlags and IOCCapabilities fields to
57 * MPI2_FW_IMAGE_HEADER.
58 * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
59 * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
60 * a U16 (from a U32).
61 * Removed extra 's' from EventMasks name.
62 * 06-27-08 02.00.08 Fixed an offset in a comment.
63 * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
64 * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
65 * renamed MinReplyFrameSize to ReplyFrameSize.
66 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
67 * Added two new RAIDOperation values for Integrated RAID
68 * Operations Status Event data.
69 * Added four new IR Configuration Change List Event data
70 * ReasonCode values.
71 * Added two new ReasonCode defines for SAS Device Status
72 * Change Event data.
73 * Added three new DiscoveryStatus bits for the SAS
74 * Discovery event data.
75 * Added Multiplexing Status Change bit to the PhyStatus
76 * field of the SAS Topology Change List event data.
77 * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
78 * BootFlags are now product-specific.
79 * Added defines for the indivdual signature bytes
80 * for MPI2_INIT_IMAGE_FOOTER.
81 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
82 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
83 * define.
84 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
85 * define.
86 * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
87 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
88 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
89 * Added two new reason codes for SAS Device Status Change
90 * Event.
91 * Added new event: SAS PHY Counter.
92 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
93 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
94 * Added new product id family for 2208.
95 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
96 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
97 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
98 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
99 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
100 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
101 * Added Host Based Discovery Phy Event data.
102 * Added defines for ProductID Product field
103 * (MPI2_FW_HEADER_PID_).
104 * Modified values for SAS ProductID Family
105 * (MPI2_FW_HEADER_PID_FAMILY_).
106 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
107 * Added PowerManagementControl Request structures and
108 * defines.
109 * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
110 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
111 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
112 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
113 * SASNotifyPrimitiveMasks field to
114 * MPI2_EVENT_NOTIFICATION_REQUEST.
115 * Added Temperature Threshold Event.
116 * Added Host Message Event.
117 * Added Send Host Message request and reply.
118 * 05-25-11 02.00.18 For Extended Image Header, added
119 * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
120 * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
121 * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
122 * 08-24-11 02.00.19 Added PhysicalPort field to
123 * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
124 * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
125 * 11-18-11 02.00.20 Incorporating additions for MPI v2.5.
126 * 03-29-12 02.00.21 Added a product specific range to event values.
127 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
128 * Added ElapsedSeconds field to
129 * MPI2_EVENT_DATA_IR_OPERATION_STATUS.
130 * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
131 * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
132 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
133 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
134 * Added Encrypted Hash Extended Image.
135 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
136 * 11-18-14 02.00.25 Updated copyright information.
137 * 03-16-15 02.00.26 Updated for MPI v2.6.
138 * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
139 * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT.
140 * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
141 * MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
142 * Added MPI26_CTRL_OP_SHUTDOWN.
143 * 08-25-15 02.00.27 Added IC ARCH Class based signature defines
144 * --------------------------------------------------------------------------
145 */
146
147#ifndef MPI2_IOC_H
148#define MPI2_IOC_H
149
150/*****************************************************************************
151*
152* IOC Messages
153*
154*****************************************************************************/
155
156/****************************************************************************
157* IOCInit message
158****************************************************************************/
159
160/*IOCInit Request message */
161typedef struct _MPI2_IOC_INIT_REQUEST {
162 U8 WhoInit; /*0x00 */
163 U8 Reserved1; /*0x01 */
164 U8 ChainOffset; /*0x02 */
165 U8 Function; /*0x03 */
166 U16 Reserved2; /*0x04 */
167 U8 Reserved3; /*0x06 */
168 U8 MsgFlags; /*0x07 */
169 U8 VP_ID; /*0x08 */
170 U8 VF_ID; /*0x09 */
171 U16 Reserved4; /*0x0A */
172 U16 MsgVersion; /*0x0C */
173 U16 HeaderVersion; /*0x0E */
174 U32 Reserved5; /*0x10 */
175 U16 ConfigurationFlags; /* 0x14 */
176 U8 HostPageSize; /*0x16 */
177 U8 HostMSIxVectors; /*0x17 */
178 U16 Reserved8; /*0x18 */
179 U16 SystemRequestFrameSize; /*0x1A */
180 U16 ReplyDescriptorPostQueueDepth; /*0x1C */
181 U16 ReplyFreeQueueDepth; /*0x1E */
182 U32 SenseBufferAddressHigh; /*0x20 */
183 U32 SystemReplyAddressHigh; /*0x24 */
184 U64 SystemRequestFrameBaseAddress; /*0x28 */
185 U64 ReplyDescriptorPostQueueAddress; /*0x30 */
186 U64 ReplyFreeQueueAddress; /*0x38 */
187 U64 TimeStamp; /*0x40 */
188} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST,
189 Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t;
190
191/*WhoInit values */
192#define MPI2_WHOINIT_NOT_INITIALIZED (0x00)
193#define MPI2_WHOINIT_SYSTEM_BIOS (0x01)
194#define MPI2_WHOINIT_ROM_BIOS (0x02)
195#define MPI2_WHOINIT_PCI_PEER (0x03)
196#define MPI2_WHOINIT_HOST_DRIVER (0x04)
197#define MPI2_WHOINIT_MANUFACTURER (0x05)
198
199/* MsgFlags */
200#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01)
201
202
203/*MsgVersion */
204#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00)
205#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8)
206#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF)
207#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0)
208
209/*HeaderVersion */
210#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00)
211#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8)
212#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
213#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
214
215/*minimum depth for a Reply Descriptor Post Queue */
216#define MPI2_RDPQ_DEPTH_MIN (16)
217
218/* Reply Descriptor Post Queue Array Entry */
219typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
220 U64 RDPQBaseAddress; /* 0x00 */
221 U32 Reserved1; /* 0x08 */
222 U32 Reserved2; /* 0x0C */
223} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
224*PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
225Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry;
226
227
228/*IOCInit Reply message */
229typedef struct _MPI2_IOC_INIT_REPLY {
230 U8 WhoInit; /*0x00 */
231 U8 Reserved1; /*0x01 */
232 U8 MsgLength; /*0x02 */
233 U8 Function; /*0x03 */
234 U16 Reserved2; /*0x04 */
235 U8 Reserved3; /*0x06 */
236 U8 MsgFlags; /*0x07 */
237 U8 VP_ID; /*0x08 */
238 U8 VF_ID; /*0x09 */
239 U16 Reserved4; /*0x0A */
240 U16 Reserved5; /*0x0C */
241 U16 IOCStatus; /*0x0E */
242 U32 IOCLogInfo; /*0x10 */
243} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY,
244 Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t;
245
246/****************************************************************************
247* IOCFacts message
248****************************************************************************/
249
250/*IOCFacts Request message */
251typedef struct _MPI2_IOC_FACTS_REQUEST {
252 U16 Reserved1; /*0x00 */
253 U8 ChainOffset; /*0x02 */
254 U8 Function; /*0x03 */
255 U16 Reserved2; /*0x04 */
256 U8 Reserved3; /*0x06 */
257 U8 MsgFlags; /*0x07 */
258 U8 VP_ID; /*0x08 */
259 U8 VF_ID; /*0x09 */
260 U16 Reserved4; /*0x0A */
261} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST,
262 Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t;
263
264/*IOCFacts Reply message */
265typedef struct _MPI2_IOC_FACTS_REPLY {
266 U16 MsgVersion; /*0x00 */
267 U8 MsgLength; /*0x02 */
268 U8 Function; /*0x03 */
269 U16 HeaderVersion; /*0x04 */
270 U8 IOCNumber; /*0x06 */
271 U8 MsgFlags; /*0x07 */
272 U8 VP_ID; /*0x08 */
273 U8 VF_ID; /*0x09 */
274 U16 Reserved1; /*0x0A */
275 U16 IOCExceptions; /*0x0C */
276 U16 IOCStatus; /*0x0E */
277 U32 IOCLogInfo; /*0x10 */
278 U8 MaxChainDepth; /*0x14 */
279 U8 WhoInit; /*0x15 */
280 U8 NumberOfPorts; /*0x16 */
281 U8 MaxMSIxVectors; /*0x17 */
282 U16 RequestCredit; /*0x18 */
283 U16 ProductID; /*0x1A */
284 U32 IOCCapabilities; /*0x1C */
285 MPI2_VERSION_UNION FWVersion; /*0x20 */
286 U16 IOCRequestFrameSize; /*0x24 */
287 U16 IOCMaxChainSegmentSize; /*0x26 */
288 U16 MaxInitiators; /*0x28 */
289 U16 MaxTargets; /*0x2A */
290 U16 MaxSasExpanders; /*0x2C */
291 U16 MaxEnclosures; /*0x2E */
292 U16 ProtocolFlags; /*0x30 */
293 U16 HighPriorityCredit; /*0x32 */
294 U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */
295 U8 ReplyFrameSize; /*0x36 */
296 U8 MaxVolumes; /*0x37 */
297 U16 MaxDevHandle; /*0x38 */
298 U16 MaxPersistentEntries; /*0x3A */
299 U16 MinDevHandle; /*0x3C */
300 U8 CurrentHostPageSize; /* 0x3E */
301 U8 Reserved4; /* 0x3F */
302} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
303 Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
304
305/*MsgVersion */
306#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
307#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8)
308#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
309#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0)
310
311/*HeaderVersion */
312#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00)
313#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8)
314#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF)
315#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
316
317/*IOCExceptions */
318#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
319#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
320
321#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
322#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000)
323#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020)
324#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040)
325#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060)
326
327#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
328#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008)
329#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
330#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
331#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
332
333/*defines for WhoInit field are after the IOCInit Request */
334
335/*ProductID field uses MPI2_FW_HEADER_PID_ */
336
337/*IOCCapabilities */
338#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000)
339#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
340#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
341#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
342#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
343#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
344#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
345#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000)
346#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800)
347#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
348#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080)
349#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040)
350#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
351#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
352#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
353#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
354
355/*ProtocolFlags */
356#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
357#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
358
359/****************************************************************************
360* PortFacts message
361****************************************************************************/
362
363/*PortFacts Request message */
364typedef struct _MPI2_PORT_FACTS_REQUEST {
365 U16 Reserved1; /*0x00 */
366 U8 ChainOffset; /*0x02 */
367 U8 Function; /*0x03 */
368 U16 Reserved2; /*0x04 */
369 U8 PortNumber; /*0x06 */
370 U8 MsgFlags; /*0x07 */
371 U8 VP_ID; /*0x08 */
372 U8 VF_ID; /*0x09 */
373 U16 Reserved3; /*0x0A */
374} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST,
375 Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t;
376
377/*PortFacts Reply message */
378typedef struct _MPI2_PORT_FACTS_REPLY {
379 U16 Reserved1; /*0x00 */
380 U8 MsgLength; /*0x02 */
381 U8 Function; /*0x03 */
382 U16 Reserved2; /*0x04 */
383 U8 PortNumber; /*0x06 */
384 U8 MsgFlags; /*0x07 */
385 U8 VP_ID; /*0x08 */
386 U8 VF_ID; /*0x09 */
387 U16 Reserved3; /*0x0A */
388 U16 Reserved4; /*0x0C */
389 U16 IOCStatus; /*0x0E */
390 U32 IOCLogInfo; /*0x10 */
391 U8 Reserved5; /*0x14 */
392 U8 PortType; /*0x15 */
393 U16 Reserved6; /*0x16 */
394 U16 MaxPostedCmdBuffers; /*0x18 */
395 U16 Reserved7; /*0x1A */
396} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY,
397 Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t;
398
399/*PortType values */
400#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00)
401#define MPI2_PORTFACTS_PORTTYPE_FC (0x10)
402#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
403#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
404#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
405
406/****************************************************************************
407* PortEnable message
408****************************************************************************/
409
410/*PortEnable Request message */
411typedef struct _MPI2_PORT_ENABLE_REQUEST {
412 U16 Reserved1; /*0x00 */
413 U8 ChainOffset; /*0x02 */
414 U8 Function; /*0x03 */
415 U8 Reserved2; /*0x04 */
416 U8 PortFlags; /*0x05 */
417 U8 Reserved3; /*0x06 */
418 U8 MsgFlags; /*0x07 */
419 U8 VP_ID; /*0x08 */
420 U8 VF_ID; /*0x09 */
421 U16 Reserved4; /*0x0A */
422} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST,
423 Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t;
424
425/*PortEnable Reply message */
426typedef struct _MPI2_PORT_ENABLE_REPLY {
427 U16 Reserved1; /*0x00 */
428 U8 MsgLength; /*0x02 */
429 U8 Function; /*0x03 */
430 U8 Reserved2; /*0x04 */
431 U8 PortFlags; /*0x05 */
432 U8 Reserved3; /*0x06 */
433 U8 MsgFlags; /*0x07 */
434 U8 VP_ID; /*0x08 */
435 U8 VF_ID; /*0x09 */
436 U16 Reserved4; /*0x0A */
437 U16 Reserved5; /*0x0C */
438 U16 IOCStatus; /*0x0E */
439 U32 IOCLogInfo; /*0x10 */
440} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY,
441 Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t;
442
443/****************************************************************************
444* EventNotification message
445****************************************************************************/
446
447/*EventNotification Request message */
448#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4)
449
450typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST {
451 U16 Reserved1; /*0x00 */
452 U8 ChainOffset; /*0x02 */
453 U8 Function; /*0x03 */
454 U16 Reserved2; /*0x04 */
455 U8 Reserved3; /*0x06 */
456 U8 MsgFlags; /*0x07 */
457 U8 VP_ID; /*0x08 */
458 U8 VF_ID; /*0x09 */
459 U16 Reserved4; /*0x0A */
460 U32 Reserved5; /*0x0C */
461 U32 Reserved6; /*0x10 */
462 U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */
463 U16 SASBroadcastPrimitiveMasks; /*0x24 */
464 U16 SASNotifyPrimitiveMasks; /*0x26 */
465 U32 Reserved8; /*0x28 */
466} MPI2_EVENT_NOTIFICATION_REQUEST,
467 *PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
468 Mpi2EventNotificationRequest_t,
469 *pMpi2EventNotificationRequest_t;
470
471/*EventNotification Reply message */
472typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
473 U16 EventDataLength; /*0x00 */
474 U8 MsgLength; /*0x02 */
475 U8 Function; /*0x03 */
476 U16 Reserved1; /*0x04 */
477 U8 AckRequired; /*0x06 */
478 U8 MsgFlags; /*0x07 */
479 U8 VP_ID; /*0x08 */
480 U8 VF_ID; /*0x09 */
481 U16 Reserved2; /*0x0A */
482 U16 Reserved3; /*0x0C */
483 U16 IOCStatus; /*0x0E */
484 U32 IOCLogInfo; /*0x10 */
485 U16 Event; /*0x14 */
486 U16 Reserved4; /*0x16 */
487 U32 EventContext; /*0x18 */
488 U32 EventData[1]; /*0x1C */
489} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY,
490 Mpi2EventNotificationReply_t,
491 *pMpi2EventNotificationReply_t;
492
493/*AckRequired */
494#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
495#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01)
496
497/*Event */
498#define MPI2_EVENT_LOG_DATA (0x0001)
499#define MPI2_EVENT_STATE_CHANGE (0x0002)
500#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005)
501#define MPI2_EVENT_EVENT_CHANGE (0x000A)
502#define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */
503#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F)
504#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014)
505#define MPI2_EVENT_SAS_DISCOVERY (0x0016)
506#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017)
507#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018)
508#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
509#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
510#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
511#define MPI2_EVENT_IR_VOLUME (0x001E)
512#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
513#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
514#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
515#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
516#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
517#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
518#define MPI2_EVENT_SAS_QUIESCE (0x0025)
519#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
520#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
521#define MPI2_EVENT_HOST_MESSAGE (0x0028)
522#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
523#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034)
524#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
525#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
526
527/*Log Entry Added Event data */
528
529/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
530#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C)
531
532typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED {
533 U64 TimeStamp; /*0x00 */
534 U32 Reserved1; /*0x08 */
535 U16 LogSequence; /*0x0C */
536 U16 LogEntryQualifier; /*0x0E */
537 U8 VP_ID; /*0x10 */
538 U8 VF_ID; /*0x11 */
539 U16 Reserved2; /*0x12 */
540 U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */
541} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
542 *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
543 Mpi2EventDataLogEntryAdded_t,
544 *pMpi2EventDataLogEntryAdded_t;
545
546/*GPIO Interrupt Event data */
547
548typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
549 U8 GPIONum; /*0x00 */
550 U8 Reserved1; /*0x01 */
551 U16 Reserved2; /*0x02 */
552} MPI2_EVENT_DATA_GPIO_INTERRUPT,
553 *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
554 Mpi2EventDataGpioInterrupt_t,
555 *pMpi2EventDataGpioInterrupt_t;
556
557/*Temperature Threshold Event data */
558
559typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
560 U16 Status; /*0x00 */
561 U8 SensorNum; /*0x02 */
562 U8 Reserved1; /*0x03 */
563 U16 CurrentTemperature; /*0x04 */
564 U16 Reserved2; /*0x06 */
565 U32 Reserved3; /*0x08 */
566 U32 Reserved4; /*0x0C */
567} MPI2_EVENT_DATA_TEMPERATURE,
568 *PTR_MPI2_EVENT_DATA_TEMPERATURE,
569 Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t;
570
571/*Temperature Threshold Event data Status bits */
572#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
573#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
574#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
575#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
576
577/*Host Message Event data */
578
579typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
580 U8 SourceVF_ID; /*0x00 */
581 U8 Reserved1; /*0x01 */
582 U16 Reserved2; /*0x02 */
583 U32 Reserved3; /*0x04 */
584 U32 HostData[1]; /*0x08 */
585} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
586 Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t;
587
588/*Power Performance Change Event data */
589
590typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
591 U8 CurrentPowerMode; /*0x00 */
592 U8 PreviousPowerMode; /*0x01 */
593 U16 Reserved1; /*0x02 */
594} MPI2_EVENT_DATA_POWER_PERF_CHANGE,
595 *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE,
596 Mpi2EventDataPowerPerfChange_t,
597 *pMpi2EventDataPowerPerfChange_t;
598
599/*defines for CurrentPowerMode and PreviousPowerMode fields */
600#define MPI2_EVENT_PM_INIT_MASK (0xC0)
601#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00)
602#define MPI2_EVENT_PM_INIT_HOST (0x40)
603#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80)
604#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0)
605
606#define MPI2_EVENT_PM_MODE_MASK (0x07)
607#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00)
608#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01)
609#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04)
610#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05)
611#define MPI2_EVENT_PM_MODE_STANDBY (0x06)
612
613/* Active Cable Exception Event data */
614
615typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
616 U32 ActiveCablePowerRequirement; /* 0x00 */
617 U8 ReasonCode; /* 0x04 */
618 U8 ReceptacleID; /* 0x05 */
619 U16 Reserved1; /* 0x06 */
620} MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
621 *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
622 Mpi26EventDataActiveCableExcept_t,
623 *pMpi26EventDataActiveCableExcept_t;
624
625/* defines for ReasonCode field */
626#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
627
628/*Hard Reset Received Event data */
629
630typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED {
631 U8 Reserved1; /*0x00 */
632 U8 Port; /*0x01 */
633 U16 Reserved2; /*0x02 */
634} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
635 *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
636 Mpi2EventDataHardResetReceived_t,
637 *pMpi2EventDataHardResetReceived_t;
638
639/*Task Set Full Event data */
640/* this event is obsolete */
641
642typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL {
643 U16 DevHandle; /*0x00 */
644 U16 CurrentDepth; /*0x02 */
645} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
646 Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t;
647
648/*SAS Device Status Change Event data */
649
650typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE {
651 U16 TaskTag; /*0x00 */
652 U8 ReasonCode; /*0x02 */
653 U8 PhysicalPort; /*0x03 */
654 U8 ASC; /*0x04 */
655 U8 ASCQ; /*0x05 */
656 U16 DevHandle; /*0x06 */
657 U32 Reserved2; /*0x08 */
658 U64 SASAddress; /*0x0C */
659 U8 LUN[8]; /*0x14 */
660} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
661 *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
662 Mpi2EventDataSasDeviceStatusChange_t,
663 *pMpi2EventDataSasDeviceStatusChange_t;
664
665/*SAS Device Status Change Event data ReasonCode values */
666#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
667#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
668#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
669#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
670#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
671#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
672#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
673#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
674#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
675#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
676#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
677#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11)
678#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12)
679
680/*Integrated RAID Operation Status Event data */
681
682typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
683 U16 VolDevHandle; /*0x00 */
684 U16 Reserved1; /*0x02 */
685 U8 RAIDOperation; /*0x04 */
686 U8 PercentComplete; /*0x05 */
687 U16 Reserved2; /*0x06 */
688 U32 ElapsedSeconds; /*0x08 */
689} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
690 *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
691 Mpi2EventDataIrOperationStatus_t,
692 *pMpi2EventDataIrOperationStatus_t;
693
694/*Integrated RAID Operation Status Event data RAIDOperation values */
695#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00)
696#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01)
697#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02)
698#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03)
699#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04)
700
701/*Integrated RAID Volume Event data */
702
703typedef struct _MPI2_EVENT_DATA_IR_VOLUME {
704 U16 VolDevHandle; /*0x00 */
705 U8 ReasonCode; /*0x02 */
706 U8 Reserved1; /*0x03 */
707 U32 NewValue; /*0x04 */
708 U32 PreviousValue; /*0x08 */
709} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME,
710 Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t;
711
712/*Integrated RAID Volume Event data ReasonCode values */
713#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01)
714#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02)
715#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03)
716
717/*Integrated RAID Physical Disk Event data */
718
719typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
720 U16 Reserved1; /*0x00 */
721 U8 ReasonCode; /*0x02 */
722 U8 PhysDiskNum; /*0x03 */
723 U16 PhysDiskDevHandle; /*0x04 */
724 U16 Reserved2; /*0x06 */
725 U16 Slot; /*0x08 */
726 U16 EnclosureHandle; /*0x0A */
727 U32 NewValue; /*0x0C */
728 U32 PreviousValue; /*0x10 */
729} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
730 *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
731 Mpi2EventDataIrPhysicalDisk_t,
732 *pMpi2EventDataIrPhysicalDisk_t;
733
734/*Integrated RAID Physical Disk Event data ReasonCode values */
735#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01)
736#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02)
737#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03)
738
739/*Integrated RAID Configuration Change List Event data */
740
741/*
742 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
743 *one and check NumElements at runtime.
744 */
745#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
746#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1)
747#endif
748
749typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
750 U16 ElementFlags; /*0x00 */
751 U16 VolDevHandle; /*0x02 */
752 U8 ReasonCode; /*0x04 */
753 U8 PhysDiskNum; /*0x05 */
754 U16 PhysDiskDevHandle; /*0x06 */
755} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
756 Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t;
757
758/*IR Configuration Change List Event data ElementFlags values */
759#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F)
760#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000)
761#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
762#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002)
763
764/*IR Configuration Change List Event data ReasonCode values */
765#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01)
766#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02)
767#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03)
768#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04)
769#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05)
770#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06)
771#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07)
772#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08)
773#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09)
774
775typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
776 U8 NumElements; /*0x00 */
777 U8 Reserved1; /*0x01 */
778 U8 Reserved2; /*0x02 */
779 U8 ConfigNum; /*0x03 */
780 U32 Flags; /*0x04 */
781 MPI2_EVENT_IR_CONFIG_ELEMENT
782 ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */
783} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
784 *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
785 Mpi2EventDataIrConfigChangeList_t,
786 *pMpi2EventDataIrConfigChangeList_t;
787
788/*IR Configuration Change List Event data Flags values */
789#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001)
790
791/*SAS Discovery Event data */
792
793typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY {
794 U8 Flags; /*0x00 */
795 U8 ReasonCode; /*0x01 */
796 U8 PhysicalPort; /*0x02 */
797 U8 Reserved1; /*0x03 */
798 U32 DiscoveryStatus; /*0x04 */
799} MPI2_EVENT_DATA_SAS_DISCOVERY,
800 *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
801 Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t;
802
803/*SAS Discovery Event data Flags values */
804#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02)
805#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01)
806
807/*SAS Discovery Event data ReasonCode values */
808#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01)
809#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02)
810
811/*SAS Discovery Event data DiscoveryStatus values */
812#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
813#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000)
814#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000)
815#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
816#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000)
817#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
818#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
819#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000)
820#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
821#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800)
822#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400)
823#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200)
824#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100)
825#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080)
826#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040)
827#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020)
828#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010)
829#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004)
830#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002)
831#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001)
832
833/*SAS Broadcast Primitive Event data */
834
835typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE {
836 U8 PhyNum; /*0x00 */
837 U8 Port; /*0x01 */
838 U8 PortWidth; /*0x02 */
839 U8 Primitive; /*0x03 */
840} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
841 *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
842 Mpi2EventDataSasBroadcastPrimitive_t,
843 *pMpi2EventDataSasBroadcastPrimitive_t;
844
845/*defines for the Primitive field */
846#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01)
847#define MPI2_EVENT_PRIMITIVE_SES (0x02)
848#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03)
849#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
850#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05)
851#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06)
852#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
853#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
854
855/*SAS Notify Primitive Event data */
856
857typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
858 U8 PhyNum; /*0x00 */
859 U8 Port; /*0x01 */
860 U8 Reserved1; /*0x02 */
861 U8 Primitive; /*0x03 */
862} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
863 *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
864 Mpi2EventDataSasNotifyPrimitive_t,
865 *pMpi2EventDataSasNotifyPrimitive_t;
866
867/*defines for the Primitive field */
868#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
869#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
870#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
871#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
872
873/*SAS Initiator Device Status Change Event data */
874
875typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE {
876 U8 ReasonCode; /*0x00 */
877 U8 PhysicalPort; /*0x01 */
878 U16 DevHandle; /*0x02 */
879 U64 SASAddress; /*0x04 */
880} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
881 *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
882 Mpi2EventDataSasInitDevStatusChange_t,
883 *pMpi2EventDataSasInitDevStatusChange_t;
884
885/*SAS Initiator Device Status Change event ReasonCode values */
886#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01)
887#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
888
889/*SAS Initiator Device Table Overflow Event data */
890
891typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
892 U16 MaxInit; /*0x00 */
893 U16 CurrentInit; /*0x02 */
894 U64 SASAddress; /*0x04 */
895} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
896 *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
897 Mpi2EventDataSasInitTableOverflow_t,
898 *pMpi2EventDataSasInitTableOverflow_t;
899
900/*SAS Topology Change List Event data */
901
902/*
903 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
904 *one and check NumEntries at runtime.
905 */
906#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
907#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1)
908#endif
909
910typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
911 U16 AttachedDevHandle; /*0x00 */
912 U8 LinkRate; /*0x02 */
913 U8 PhyStatus; /*0x03 */
914} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
915 Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t;
916
917typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
918 U16 EnclosureHandle; /*0x00 */
919 U16 ExpanderDevHandle; /*0x02 */
920 U8 NumPhys; /*0x04 */
921 U8 Reserved1; /*0x05 */
922 U16 Reserved2; /*0x06 */
923 U8 NumEntries; /*0x08 */
924 U8 StartPhyNum; /*0x09 */
925 U8 ExpStatus; /*0x0A */
926 U8 PhysicalPort; /*0x0B */
927 MPI2_EVENT_SAS_TOPO_PHY_ENTRY
928 PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */
929} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
930 *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
931 Mpi2EventDataSasTopologyChangeList_t,
932 *pMpi2EventDataSasTopologyChangeList_t;
933
934/*values for the ExpStatus field */
935#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
936#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01)
937#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
938#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
939#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
940
941/*defines for the LinkRate field */
942#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0)
943#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
944#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F)
945#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
946
947#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
948#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
949#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
950#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
951#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
952#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
953#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
954#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08)
955#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
956#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
957#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
958
959/*values for the PhyStatus field */
960#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
961#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10)
962/*values for the PhyStatus ReasonCode sub-field */
963#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F)
964#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01)
965#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02)
966#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03)
967#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04)
968#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05)
969
970/*SAS Enclosure Device Status Change Event data */
971
972typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
973 U16 EnclosureHandle; /*0x00 */
974 U8 ReasonCode; /*0x02 */
975 U8 PhysicalPort; /*0x03 */
976 U64 EnclosureLogicalID; /*0x04 */
977 U16 NumSlots; /*0x0C */
978 U16 StartSlot; /*0x0E */
979 U32 PhyBits; /*0x10 */
980} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
981 *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
982 Mpi2EventDataSasEnclDevStatusChange_t,
983 *pMpi2EventDataSasEnclDevStatusChange_t;
984
985/*SAS Enclosure Device Status Change event ReasonCode values */
986#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
987#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
988
989/*SAS PHY Counter Event data */
990
991typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
992 U64 TimeStamp; /*0x00 */
993 U32 Reserved1; /*0x08 */
994 U8 PhyEventCode; /*0x0C */
995 U8 PhyNum; /*0x0D */
996 U16 Reserved2; /*0x0E */
997 U32 PhyEventInfo; /*0x10 */
998 U8 CounterType; /*0x14 */
999 U8 ThresholdWindow; /*0x15 */
1000 U8 TimeUnits; /*0x16 */
1001 U8 Reserved3; /*0x17 */
1002 U32 EventThreshold; /*0x18 */
1003 U16 ThresholdFlags; /*0x1C */
1004 U16 Reserved4; /*0x1E */
1005} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
1006 *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
1007 Mpi2EventDataSasPhyCounter_t,
1008 *pMpi2EventDataSasPhyCounter_t;
1009
1010/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h
1011 *for the PhyEventCode field */
1012
1013/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h
1014 *for the CounterType field */
1015
1016/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h
1017 *for the TimeUnits field */
1018
1019/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h
1020 *for the ThresholdFlags field */
1021
1022/*SAS Quiesce Event data */
1023
1024typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
1025 U8 ReasonCode; /*0x00 */
1026 U8 Reserved1; /*0x01 */
1027 U16 Reserved2; /*0x02 */
1028 U32 Reserved3; /*0x04 */
1029} MPI2_EVENT_DATA_SAS_QUIESCE,
1030 *PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
1031 Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t;
1032
1033/*SAS Quiesce Event data ReasonCode values */
1034#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01)
1035#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02)
1036
1037/*Host Based Discovery Phy Event data */
1038
1039typedef struct _MPI2_EVENT_HBD_PHY_SAS {
1040 U8 Flags; /*0x00 */
1041 U8 NegotiatedLinkRate; /*0x01 */
1042 U8 PhyNum; /*0x02 */
1043 U8 PhysicalPort; /*0x03 */
1044 U32 Reserved1; /*0x04 */
1045 U8 InitialFrame[28]; /*0x08 */
1046} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS,
1047 Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t;
1048
1049/*values for the Flags field */
1050#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02)
1051#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01)
1052
1053/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h
1054 *for the NegotiatedLinkRate field */
1055
1056typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
1057 MPI2_EVENT_HBD_PHY_SAS Sas;
1058} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR,
1059 Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t;
1060
1061typedef struct _MPI2_EVENT_DATA_HBD_PHY {
1062 U8 DescriptorType; /*0x00 */
1063 U8 Reserved1; /*0x01 */
1064 U16 Reserved2; /*0x02 */
1065 U32 Reserved3; /*0x04 */
1066 MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */
1067} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY,
1068 Mpi2EventDataHbdPhy_t,
1069 *pMpi2EventDataMpi2EventDataHbdPhy_t;
1070
1071/*values for the DescriptorType field */
1072#define MPI2_EVENT_HBD_DT_SAS (0x01)
1073
1074/****************************************************************************
1075* EventAck message
1076****************************************************************************/
1077
1078/*EventAck Request message */
1079typedef struct _MPI2_EVENT_ACK_REQUEST {
1080 U16 Reserved1; /*0x00 */
1081 U8 ChainOffset; /*0x02 */
1082 U8 Function; /*0x03 */
1083 U16 Reserved2; /*0x04 */
1084 U8 Reserved3; /*0x06 */
1085 U8 MsgFlags; /*0x07 */
1086 U8 VP_ID; /*0x08 */
1087 U8 VF_ID; /*0x09 */
1088 U16 Reserved4; /*0x0A */
1089 U16 Event; /*0x0C */
1090 U16 Reserved5; /*0x0E */
1091 U32 EventContext; /*0x10 */
1092} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST,
1093 Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t;
1094
1095/*EventAck Reply message */
1096typedef struct _MPI2_EVENT_ACK_REPLY {
1097 U16 Reserved1; /*0x00 */
1098 U8 MsgLength; /*0x02 */
1099 U8 Function; /*0x03 */
1100 U16 Reserved2; /*0x04 */
1101 U8 Reserved3; /*0x06 */
1102 U8 MsgFlags; /*0x07 */
1103 U8 VP_ID; /*0x08 */
1104 U8 VF_ID; /*0x09 */
1105 U16 Reserved4; /*0x0A */
1106 U16 Reserved5; /*0x0C */
1107 U16 IOCStatus; /*0x0E */
1108 U32 IOCLogInfo; /*0x10 */
1109} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY,
1110 Mpi2EventAckReply_t, *pMpi2EventAckReply_t;
1111
1112/****************************************************************************
1113* SendHostMessage message
1114****************************************************************************/
1115
1116/*SendHostMessage Request message */
1117typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
1118 U16 HostDataLength; /*0x00 */
1119 U8 ChainOffset; /*0x02 */
1120 U8 Function; /*0x03 */
1121 U16 Reserved1; /*0x04 */
1122 U8 Reserved2; /*0x06 */
1123 U8 MsgFlags; /*0x07 */
1124 U8 VP_ID; /*0x08 */
1125 U8 VF_ID; /*0x09 */
1126 U16 Reserved3; /*0x0A */
1127 U8 Reserved4; /*0x0C */
1128 U8 DestVF_ID; /*0x0D */
1129 U16 Reserved5; /*0x0E */
1130 U32 Reserved6; /*0x10 */
1131 U32 Reserved7; /*0x14 */
1132 U32 Reserved8; /*0x18 */
1133 U32 Reserved9; /*0x1C */
1134 U32 Reserved10; /*0x20 */
1135 U32 HostData[1]; /*0x24 */
1136} MPI2_SEND_HOST_MESSAGE_REQUEST,
1137 *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
1138 Mpi2SendHostMessageRequest_t,
1139 *pMpi2SendHostMessageRequest_t;
1140
1141/*SendHostMessage Reply message */
1142typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
1143 U16 HostDataLength; /*0x00 */
1144 U8 MsgLength; /*0x02 */
1145 U8 Function; /*0x03 */
1146 U16 Reserved1; /*0x04 */
1147 U8 Reserved2; /*0x06 */
1148 U8 MsgFlags; /*0x07 */
1149 U8 VP_ID; /*0x08 */
1150 U8 VF_ID; /*0x09 */
1151 U16 Reserved3; /*0x0A */
1152 U16 Reserved4; /*0x0C */
1153 U16 IOCStatus; /*0x0E */
1154 U32 IOCLogInfo; /*0x10 */
1155} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
1156 Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t;
1157
1158/****************************************************************************
1159* FWDownload message
1160****************************************************************************/
1161
1162/*MPI v2.0 FWDownload Request message */
1163typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
1164 U8 ImageType; /*0x00 */
1165 U8 Reserved1; /*0x01 */
1166 U8 ChainOffset; /*0x02 */
1167 U8 Function; /*0x03 */
1168 U16 Reserved2; /*0x04 */
1169 U8 Reserved3; /*0x06 */
1170 U8 MsgFlags; /*0x07 */
1171 U8 VP_ID; /*0x08 */
1172 U8 VF_ID; /*0x09 */
1173 U16 Reserved4; /*0x0A */
1174 U32 TotalImageSize; /*0x0C */
1175 U32 Reserved5; /*0x10 */
1176 MPI2_MPI_SGE_UNION SGL; /*0x14 */
1177} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST,
1178 Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest;
1179
1180#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01)
1181
1182#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01)
1183#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02)
1184#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
1185#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
1186#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
1187#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
1188#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
1189#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
1190#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
1191#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
1192
1193/*MPI v2.0 FWDownload TransactionContext Element */
1194typedef struct _MPI2_FW_DOWNLOAD_TCSGE {
1195 U8 Reserved1; /*0x00 */
1196 U8 ContextSize; /*0x01 */
1197 U8 DetailsLength; /*0x02 */
1198 U8 Flags; /*0x03 */
1199 U32 Reserved2; /*0x04 */
1200 U32 ImageOffset; /*0x08 */
1201 U32 ImageSize; /*0x0C */
1202} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE,
1203 Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t;
1204
1205/*MPI v2.5 FWDownload Request message */
1206typedef struct _MPI25_FW_DOWNLOAD_REQUEST {
1207 U8 ImageType; /*0x00 */
1208 U8 Reserved1; /*0x01 */
1209 U8 ChainOffset; /*0x02 */
1210 U8 Function; /*0x03 */
1211 U16 Reserved2; /*0x04 */
1212 U8 Reserved3; /*0x06 */
1213 U8 MsgFlags; /*0x07 */
1214 U8 VP_ID; /*0x08 */
1215 U8 VF_ID; /*0x09 */
1216 U16 Reserved4; /*0x0A */
1217 U32 TotalImageSize; /*0x0C */
1218 U32 Reserved5; /*0x10 */
1219 U32 Reserved6; /*0x14 */
1220 U32 ImageOffset; /*0x18 */
1221 U32 ImageSize; /*0x1C */
1222 MPI25_SGE_IO_UNION SGL; /*0x20 */
1223} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST,
1224 Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest;
1225
1226/*FWDownload Reply message */
1227typedef struct _MPI2_FW_DOWNLOAD_REPLY {
1228 U8 ImageType; /*0x00 */
1229 U8 Reserved1; /*0x01 */
1230 U8 MsgLength; /*0x02 */
1231 U8 Function; /*0x03 */
1232 U16 Reserved2; /*0x04 */
1233 U8 Reserved3; /*0x06 */
1234 U8 MsgFlags; /*0x07 */
1235 U8 VP_ID; /*0x08 */
1236 U8 VF_ID; /*0x09 */
1237 U16 Reserved4; /*0x0A */
1238 U16 Reserved5; /*0x0C */
1239 U16 IOCStatus; /*0x0E */
1240 U32 IOCLogInfo; /*0x10 */
1241} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY,
1242 Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t;
1243
1244/****************************************************************************
1245* FWUpload message
1246****************************************************************************/
1247
1248/*MPI v2.0 FWUpload Request message */
1249typedef struct _MPI2_FW_UPLOAD_REQUEST {
1250 U8 ImageType; /*0x00 */
1251 U8 Reserved1; /*0x01 */
1252 U8 ChainOffset; /*0x02 */
1253 U8 Function; /*0x03 */
1254 U16 Reserved2; /*0x04 */
1255 U8 Reserved3; /*0x06 */
1256 U8 MsgFlags; /*0x07 */
1257 U8 VP_ID; /*0x08 */
1258 U8 VF_ID; /*0x09 */
1259 U16 Reserved4; /*0x0A */
1260 U32 Reserved5; /*0x0C */
1261 U32 Reserved6; /*0x10 */
1262 MPI2_MPI_SGE_UNION SGL; /*0x14 */
1263} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST,
1264 Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t;
1265
1266#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00)
1267#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
1268#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
1269#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
1270#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
1271#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
1272#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
1273#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09)
1274#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
1275#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
1276#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D)
1277
1278/*MPI v2.0 FWUpload TransactionContext Element */
1279typedef struct _MPI2_FW_UPLOAD_TCSGE {
1280 U8 Reserved1; /*0x00 */
1281 U8 ContextSize; /*0x01 */
1282 U8 DetailsLength; /*0x02 */
1283 U8 Flags; /*0x03 */
1284 U32 Reserved2; /*0x04 */
1285 U32 ImageOffset; /*0x08 */
1286 U32 ImageSize; /*0x0C */
1287} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE,
1288 Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t;
1289
1290/*MPI v2.5 FWUpload Request message */
1291typedef struct _MPI25_FW_UPLOAD_REQUEST {
1292 U8 ImageType; /*0x00 */
1293 U8 Reserved1; /*0x01 */
1294 U8 ChainOffset; /*0x02 */
1295 U8 Function; /*0x03 */
1296 U16 Reserved2; /*0x04 */
1297 U8 Reserved3; /*0x06 */
1298 U8 MsgFlags; /*0x07 */
1299 U8 VP_ID; /*0x08 */
1300 U8 VF_ID; /*0x09 */
1301 U16 Reserved4; /*0x0A */
1302 U32 Reserved5; /*0x0C */
1303 U32 Reserved6; /*0x10 */
1304 U32 Reserved7; /*0x14 */
1305 U32 ImageOffset; /*0x18 */
1306 U32 ImageSize; /*0x1C */
1307 MPI25_SGE_IO_UNION SGL; /*0x20 */
1308} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST,
1309 Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t;
1310
1311/*FWUpload Reply message */
1312typedef struct _MPI2_FW_UPLOAD_REPLY {
1313 U8 ImageType; /*0x00 */
1314 U8 Reserved1; /*0x01 */
1315 U8 MsgLength; /*0x02 */
1316 U8 Function; /*0x03 */
1317 U16 Reserved2; /*0x04 */
1318 U8 Reserved3; /*0x06 */
1319 U8 MsgFlags; /*0x07 */
1320 U8 VP_ID; /*0x08 */
1321 U8 VF_ID; /*0x09 */
1322 U16 Reserved4; /*0x0A */
1323 U16 Reserved5; /*0x0C */
1324 U16 IOCStatus; /*0x0E */
1325 U32 IOCLogInfo; /*0x10 */
1326 U32 ActualImageSize; /*0x14 */
1327} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY,
1328 Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t;
1329
1330/*FW Image Header */
1331typedef struct _MPI2_FW_IMAGE_HEADER {
1332 U32 Signature; /*0x00 */
1333 U32 Signature0; /*0x04 */
1334 U32 Signature1; /*0x08 */
1335 U32 Signature2; /*0x0C */
1336 MPI2_VERSION_UNION MPIVersion; /*0x10 */
1337 MPI2_VERSION_UNION FWVersion; /*0x14 */
1338 MPI2_VERSION_UNION NVDATAVersion; /*0x18 */
1339 MPI2_VERSION_UNION PackageVersion; /*0x1C */
1340 U16 VendorID; /*0x20 */
1341 U16 ProductID; /*0x22 */
1342 U16 ProtocolFlags; /*0x24 */
1343 U16 Reserved26; /*0x26 */
1344 U32 IOCCapabilities; /*0x28 */
1345 U32 ImageSize; /*0x2C */
1346 U32 NextImageHeaderOffset; /*0x30 */
1347 U32 Checksum; /*0x34 */
1348 U32 Reserved38; /*0x38 */
1349 U32 Reserved3C; /*0x3C */
1350 U32 Reserved40; /*0x40 */
1351 U32 Reserved44; /*0x44 */
1352 U32 Reserved48; /*0x48 */
1353 U32 Reserved4C; /*0x4C */
1354 U32 Reserved50; /*0x50 */
1355 U32 Reserved54; /*0x54 */
1356 U32 Reserved58; /*0x58 */
1357 U32 Reserved5C; /*0x5C */
1358 U32 BootFlags; /*0x60 */
1359 U32 FirmwareVersionNameWhat; /*0x64 */
1360 U8 FirmwareVersionName[32]; /*0x68 */
1361 U32 VendorNameWhat; /*0x88 */
1362 U8 VendorName[32]; /*0x8C */
1363 U32 PackageNameWhat; /*0x88 */
1364 U8 PackageName[32]; /*0x8C */
1365 U32 ReservedD0; /*0xD0 */
1366 U32 ReservedD4; /*0xD4 */
1367 U32 ReservedD8; /*0xD8 */
1368 U32 ReservedDC; /*0xDC */
1369 U32 ReservedE0; /*0xE0 */
1370 U32 ReservedE4; /*0xE4 */
1371 U32 ReservedE8; /*0xE8 */
1372 U32 ReservedEC; /*0xEC */
1373 U32 ReservedF0; /*0xF0 */
1374 U32 ReservedF4; /*0xF4 */
1375 U32 ReservedF8; /*0xF8 */
1376 U32 ReservedFC; /*0xFC */
1377} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER,
1378 Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t;
1379
1380/*Signature field */
1381#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
1382#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
1383#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
1384#define MPI26_FW_HEADER_SIGNATURE (0xEB000000)
1385
1386/*Signature0 field */
1387#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
1388#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
1389/* Last byte is defined by architecture */
1390#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500)
1391#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A)
1392#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
1393#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
1394/* legacy (0x5AEAA55A) */
1395#define MPI26_FW_HEADER_SIGNATURE0 \
1396 (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
1397#define MPI26_FW_HEADER_SIGNATURE0_3516 \
1398 (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
1399
1400/*Signature1 field */
1401#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
1402#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
1403#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5)
1404
1405/*Signature2 field */
1406#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
1407#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
1408#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA)
1409
1410/*defines for using the ProductID field */
1411#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
1412#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
1413
1414#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
1415#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
1416#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
1417#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
1418
1419#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
1420/*SAS ProductID Family bits */
1421#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
1422#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
1423#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021)
1424#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028)
1425#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031)
1426
1427/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
1428
1429/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
1430
1431#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
1432#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
1433#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60)
1434#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
1435
1436#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
1437
1438#define MPI2_FW_HEADER_SIZE (0x100)
1439
1440/*Extended Image Header */
1441typedef struct _MPI2_EXT_IMAGE_HEADER {
1442 U8 ImageType; /*0x00 */
1443 U8 Reserved1; /*0x01 */
1444 U16 Reserved2; /*0x02 */
1445 U32 Checksum; /*0x04 */
1446 U32 ImageSize; /*0x08 */
1447 U32 NextImageHeaderOffset; /*0x0C */
1448 U32 PackageVersion; /*0x10 */
1449 U32 Reserved3; /*0x14 */
1450 U32 Reserved4; /*0x18 */
1451 U32 Reserved5; /*0x1C */
1452 U8 IdentifyString[32]; /*0x20 */
1453} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER,
1454 Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t;
1455
1456/*useful offsets */
1457#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
1458#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
1459#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
1460
1461#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40)
1462
1463/*defines for the ImageType field */
1464#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
1465#define MPI2_EXT_IMAGE_TYPE_FW (0x01)
1466#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03)
1467#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
1468#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
1469#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06)
1470#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
1471#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
1472#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
1473#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
1474#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
1475
1476#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)
1477
1478/*FLASH Layout Extended Image Data */
1479
1480/*
1481 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1482 *one and check RegionsPerLayout at runtime.
1483 */
1484#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
1485#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
1486#endif
1487
1488/*
1489 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1490 *one and check NumberOfLayouts at runtime.
1491 */
1492#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
1493#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
1494#endif
1495
1496typedef struct _MPI2_FLASH_REGION {
1497 U8 RegionType; /*0x00 */
1498 U8 Reserved1; /*0x01 */
1499 U16 Reserved2; /*0x02 */
1500 U32 RegionOffset; /*0x04 */
1501 U32 RegionSize; /*0x08 */
1502 U32 Reserved3; /*0x0C */
1503} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION,
1504 Mpi2FlashRegion_t, *pMpi2FlashRegion_t;
1505
1506typedef struct _MPI2_FLASH_LAYOUT {
1507 U32 FlashSize; /*0x00 */
1508 U32 Reserved1; /*0x04 */
1509 U32 Reserved2; /*0x08 */
1510 U32 Reserved3; /*0x0C */
1511 MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */
1512} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
1513 Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
1514
1515typedef struct _MPI2_FLASH_LAYOUT_DATA {
1516 U8 ImageRevision; /*0x00 */
1517 U8 Reserved1; /*0x01 */
1518 U8 SizeOfRegion; /*0x02 */
1519 U8 Reserved2; /*0x03 */
1520 U16 NumberOfLayouts; /*0x04 */
1521 U16 RegionsPerLayout; /*0x06 */
1522 U16 MinimumSectorAlignment; /*0x08 */
1523 U16 Reserved3; /*0x0A */
1524 U32 Reserved4; /*0x0C */
1525 MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */
1526} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
1527 Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
1528
1529/*defines for the RegionType field */
1530#define MPI2_FLASH_REGION_UNUSED (0x00)
1531#define MPI2_FLASH_REGION_FIRMWARE (0x01)
1532#define MPI2_FLASH_REGION_BIOS (0x02)
1533#define MPI2_FLASH_REGION_NVDATA (0x03)
1534#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05)
1535#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06)
1536#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
1537#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
1538#define MPI2_FLASH_REGION_MEGARAID (0x09)
1539#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
1540#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
1541#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
1542
1543/*ImageRevision */
1544#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
1545
1546/*Supported Devices Extended Image Data */
1547
1548/*
1549 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1550 *one and check NumberOfDevices at runtime.
1551 */
1552#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
1553#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
1554#endif
1555
1556typedef struct _MPI2_SUPPORTED_DEVICE {
1557 U16 DeviceID; /*0x00 */
1558 U16 VendorID; /*0x02 */
1559 U16 DeviceIDMask; /*0x04 */
1560 U16 Reserved1; /*0x06 */
1561 U8 LowPCIRev; /*0x08 */
1562 U8 HighPCIRev; /*0x09 */
1563 U16 Reserved2; /*0x0A */
1564 U32 Reserved3; /*0x0C */
1565} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE,
1566 Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t;
1567
1568typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
1569 U8 ImageRevision; /*0x00 */
1570 U8 Reserved1; /*0x01 */
1571 U8 NumberOfDevices; /*0x02 */
1572 U8 Reserved2; /*0x03 */
1573 U32 Reserved3; /*0x04 */
1574 MPI2_SUPPORTED_DEVICE
1575 SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
1576} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
1577 Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
1578
1579/*ImageRevision */
1580#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00)
1581
1582/*Init Extended Image Data */
1583
1584typedef struct _MPI2_INIT_IMAGE_FOOTER {
1585 U32 BootFlags; /*0x00 */
1586 U32 ImageSize; /*0x04 */
1587 U32 Signature0; /*0x08 */
1588 U32 Signature1; /*0x0C */
1589 U32 Signature2; /*0x10 */
1590 U32 ResetVector; /*0x14 */
1591} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER,
1592 Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t;
1593
1594/*defines for the BootFlags field */
1595#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00)
1596
1597/*defines for the ImageSize field */
1598#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04)
1599
1600/*defines for the Signature0 field */
1601#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08)
1602#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA)
1603
1604/*defines for the Signature1 field */
1605#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C)
1606#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5)
1607
1608/*defines for the Signature2 field */
1609#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10)
1610#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A)
1611
1612/*Signature fields as individual bytes */
1613#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA)
1614#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A)
1615#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5)
1616#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A)
1617
1618#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5)
1619#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA)
1620#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A)
1621#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5)
1622
1623#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A)
1624#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5)
1625#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA)
1626#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A)
1627
1628/*defines for the ResetVector field */
1629#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
1630
1631
1632/* Encrypted Hash Extended Image Data */
1633
1634typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
1635 U8 HashImageType; /* 0x00 */
1636 U8 HashAlgorithm; /* 0x01 */
1637 U8 EncryptionAlgorithm; /* 0x02 */
1638 U8 Reserved1; /* 0x03 */
1639 U32 Reserved2; /* 0x04 */
1640 U32 EncryptedHash[1]; /* 0x08 */ /* variable length */
1641} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
1642Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
1643
1644/* values for HashImageType */
1645#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
1646#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
1647#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02)
1648
1649/* values for HashAlgorithm */
1650#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
1651#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
1652
1653/* values for EncryptionAlgorithm */
1654#define MPI25_ENCRYPTION_ALG_UNUSED (0x00)
1655#define MPI25_ENCRYPTION_ALG_RSA256 (0x01)
1656
1657typedef struct _MPI25_ENCRYPTED_HASH_DATA {
1658 U8 ImageVersion; /* 0x00 */
1659 U8 NumHash; /* 0x01 */
1660 U16 Reserved1; /* 0x02 */
1661 U32 Reserved2; /* 0x04 */
1662 MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */
1663} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
1664Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
1665
1666
1667/****************************************************************************
1668* PowerManagementControl message
1669****************************************************************************/
1670
1671/*PowerManagementControl Request message */
1672typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
1673 U8 Feature; /*0x00 */
1674 U8 Reserved1; /*0x01 */
1675 U8 ChainOffset; /*0x02 */
1676 U8 Function; /*0x03 */
1677 U16 Reserved2; /*0x04 */
1678 U8 Reserved3; /*0x06 */
1679 U8 MsgFlags; /*0x07 */
1680 U8 VP_ID; /*0x08 */
1681 U8 VF_ID; /*0x09 */
1682 U16 Reserved4; /*0x0A */
1683 U8 Parameter1; /*0x0C */
1684 U8 Parameter2; /*0x0D */
1685 U8 Parameter3; /*0x0E */
1686 U8 Parameter4; /*0x0F */
1687 U32 Reserved5; /*0x10 */
1688 U32 Reserved6; /*0x14 */
1689} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
1690 Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t;
1691
1692/*defines for the Feature field */
1693#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01)
1694#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02)
1695#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */
1696#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04)
1697#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05)
1698#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80)
1699#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF)
1700
1701/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
1702/*Parameter1 contains a PHY number */
1703/*Parameter2 indicates power condition action using these defines */
1704#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01)
1705#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02)
1706#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03)
1707/*Parameter3 and Parameter4 are reserved */
1708
1709/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
1710 * Feature */
1711/*Parameter1 contains SAS port width modulation group number */
1712/*Parameter2 indicates IOC action using these defines */
1713#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01)
1714#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02)
1715#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03)
1716/*Parameter3 indicates desired modulation level using these defines */
1717#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00)
1718#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01)
1719#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02)
1720#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03)
1721/*Parameter4 is reserved */
1722
1723/*this next set (_PCIE_LINK) is obsolete */
1724/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
1725/*Parameter1 indicates desired PCIe link speed using these defines */
1726#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */
1727#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */
1728#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */
1729/*Parameter2 indicates desired PCIe link width using these defines */
1730#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */
1731#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */
1732#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */
1733#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */
1734/*Parameter3 and Parameter4 are reserved */
1735
1736/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
1737/*Parameter1 indicates desired IOC hardware clock speed using these defines */
1738#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01)
1739#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02)
1740#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04)
1741#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08)
1742/*Parameter2, Parameter3, and Parameter4 are reserved */
1743
1744/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/
1745/*Parameter1 indicates host action regarding global power management mode */
1746#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01)
1747#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02)
1748#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03)
1749/*Parameter2 indicates the requested global power management mode */
1750#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01)
1751#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08)
1752#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40)
1753/*Parameter3 and Parameter4 are reserved */
1754
1755/*PowerManagementControl Reply message */
1756typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
1757 U8 Feature; /*0x00 */
1758 U8 Reserved1; /*0x01 */
1759 U8 MsgLength; /*0x02 */
1760 U8 Function; /*0x03 */
1761 U16 Reserved2; /*0x04 */
1762 U8 Reserved3; /*0x06 */
1763 U8 MsgFlags; /*0x07 */
1764 U8 VP_ID; /*0x08 */
1765 U8 VF_ID; /*0x09 */
1766 U16 Reserved4; /*0x0A */
1767 U16 Reserved5; /*0x0C */
1768 U16 IOCStatus; /*0x0E */
1769 U32 IOCLogInfo; /*0x10 */
1770} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
1771 Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t;
1772
1773/****************************************************************************
1774* IO Unit Control messages (MPI v2.6 and later only.)
1775****************************************************************************/
1776
1777/* IO Unit Control Request Message */
1778typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
1779 U8 Operation; /* 0x00 */
1780 U8 Reserved1; /* 0x01 */
1781 U8 ChainOffset; /* 0x02 */
1782 U8 Function; /* 0x03 */
1783 U16 DevHandle; /* 0x04 */
1784 U8 IOCParameter; /* 0x06 */
1785 U8 MsgFlags; /* 0x07 */
1786 U8 VP_ID; /* 0x08 */
1787 U8 VF_ID; /* 0x09 */
1788 U16 Reserved3; /* 0x0A */
1789 U16 Reserved4; /* 0x0C */
1790 U8 PhyNum; /* 0x0E */
1791 U8 PrimFlags; /* 0x0F */
1792 U32 Primitive; /* 0x10 */
1793 U8 LookupMethod; /* 0x14 */
1794 U8 Reserved5; /* 0x15 */
1795 U16 SlotNumber; /* 0x16 */
1796 U64 LookupAddress; /* 0x18 */
1797 U32 IOCParameterValue; /* 0x20 */
1798 U32 Reserved7; /* 0x24 */
1799 U32 Reserved8; /* 0x28 */
1800} MPI26_IOUNIT_CONTROL_REQUEST,
1801 *PTR_MPI26_IOUNIT_CONTROL_REQUEST,
1802 Mpi26IoUnitControlRequest_t,
1803 *pMpi26IoUnitControlRequest_t;
1804
1805/* values for the Operation field */
1806#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02)
1807#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06)
1808#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07)
1809#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08)
1810#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09)
1811#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A)
1812#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B)
1813#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D)
1814#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E)
1815#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F)
1816#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10)
1817#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11)
1818#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12)
1819#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13)
1820#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14)
1821#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15)
1822#define MPI26_CTRL_OP_SHUTDOWN (0x16)
1823#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17)
1824#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18)
1825#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19)
1826#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80)
1827
1828/* values for the PrimFlags field */
1829#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08)
1830#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02)
1831#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01)
1832
1833/* values for the LookupMethod field */
1834#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
1835#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
1836#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
1837
1838
1839/* IO Unit Control Reply Message */
1840typedef struct _MPI26_IOUNIT_CONTROL_REPLY {
1841 U8 Operation; /* 0x00 */
1842 U8 Reserved1; /* 0x01 */
1843 U8 MsgLength; /* 0x02 */
1844 U8 Function; /* 0x03 */
1845 U16 DevHandle; /* 0x04 */
1846 U8 IOCParameter; /* 0x06 */
1847 U8 MsgFlags; /* 0x07 */
1848 U8 VP_ID; /* 0x08 */
1849 U8 VF_ID; /* 0x09 */
1850 U16 Reserved3; /* 0x0A */
1851 U16 Reserved4; /* 0x0C */
1852 U16 IOCStatus; /* 0x0E */
1853 U32 IOCLogInfo; /* 0x10 */
1854} MPI26_IOUNIT_CONTROL_REPLY,
1855 *PTR_MPI26_IOUNIT_CONTROL_REPLY,
1856 Mpi26IoUnitControlReply_t,
1857 *pMpi26IoUnitControlReply_t;
1858
1859
1860#endif