Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Common boot and setup code for both 32-bit and 64-bit.
4 * Extracted from arch/powerpc/kernel/setup_64.c.
5 *
6 * Copyright (C) 2001 PPC64 Team, IBM Corp
7 */
8
9#undef DEBUG
10
11#include <linux/export.h>
12#include <linux/panic_notifier.h>
13#include <linux/string.h>
14#include <linux/sched.h>
15#include <linux/init.h>
16#include <linux/kernel.h>
17#include <linux/reboot.h>
18#include <linux/delay.h>
19#include <linux/initrd.h>
20#include <linux/platform_device.h>
21#include <linux/printk.h>
22#include <linux/seq_file.h>
23#include <linux/ioport.h>
24#include <linux/console.h>
25#include <linux/root_dev.h>
26#include <linux/cpu.h>
27#include <linux/unistd.h>
28#include <linux/seq_buf.h>
29#include <linux/serial.h>
30#include <linux/serial_8250.h>
31#include <linux/percpu.h>
32#include <linux/memblock.h>
33#include <linux/of.h>
34#include <linux/of_fdt.h>
35#include <linux/of_irq.h>
36#include <linux/hugetlb.h>
37#include <linux/pgtable.h>
38#include <asm/io.h>
39#include <asm/paca.h>
40#include <asm/processor.h>
41#include <asm/vdso_datapage.h>
42#include <asm/smp.h>
43#include <asm/elf.h>
44#include <asm/machdep.h>
45#include <asm/time.h>
46#include <asm/cputable.h>
47#include <asm/sections.h>
48#include <asm/firmware.h>
49#include <asm/btext.h>
50#include <asm/nvram.h>
51#include <asm/setup.h>
52#include <asm/rtas.h>
53#include <asm/iommu.h>
54#include <asm/serial.h>
55#include <asm/cache.h>
56#include <asm/page.h>
57#include <asm/mmu.h>
58#include <asm/xmon.h>
59#include <asm/cputhreads.h>
60#include <mm/mmu_decl.h>
61#include <asm/archrandom.h>
62#include <asm/fadump.h>
63#include <asm/udbg.h>
64#include <asm/hugetlb.h>
65#include <asm/livepatch.h>
66#include <asm/mmu_context.h>
67#include <asm/cpu_has_feature.h>
68#include <asm/kasan.h>
69#include <asm/mce.h>
70
71#include "setup.h"
72
73#ifdef DEBUG
74#define DBG(fmt...) udbg_printf(fmt)
75#else
76#define DBG(fmt...)
77#endif
78
79/* The main machine-dep calls structure
80 */
81struct machdep_calls ppc_md;
82EXPORT_SYMBOL(ppc_md);
83struct machdep_calls *machine_id;
84EXPORT_SYMBOL(machine_id);
85
86int boot_cpuid = -1;
87EXPORT_SYMBOL_GPL(boot_cpuid);
88
89#ifdef CONFIG_PPC64
90int boot_cpu_hwid = -1;
91#endif
92
93/*
94 * These are used in binfmt_elf.c to put aux entries on the stack
95 * for each elf executable being started.
96 */
97int dcache_bsize;
98int icache_bsize;
99
100/* Variables required to store legacy IO irq routing */
101int of_i8042_kbd_irq;
102EXPORT_SYMBOL_GPL(of_i8042_kbd_irq);
103int of_i8042_aux_irq;
104EXPORT_SYMBOL_GPL(of_i8042_aux_irq);
105
106#ifdef __DO_IRQ_CANON
107/* XXX should go elsewhere eventually */
108int ppc_do_canonicalize_irqs;
109EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
110#endif
111
112#ifdef CONFIG_CRASH_CORE
113/* This keeps a track of which one is the crashing cpu. */
114int crashing_cpu = -1;
115#endif
116
117/* also used by kexec */
118void machine_shutdown(void)
119{
120 /*
121 * if fadump is active, cleanup the fadump registration before we
122 * shutdown.
123 */
124 fadump_cleanup();
125
126 if (ppc_md.machine_shutdown)
127 ppc_md.machine_shutdown();
128}
129
130static void machine_hang(void)
131{
132 pr_emerg("System Halted, OK to turn off power\n");
133 local_irq_disable();
134 while (1)
135 ;
136}
137
138void machine_restart(char *cmd)
139{
140 machine_shutdown();
141 if (ppc_md.restart)
142 ppc_md.restart(cmd);
143
144 smp_send_stop();
145
146 do_kernel_restart(cmd);
147 mdelay(1000);
148
149 machine_hang();
150}
151
152void machine_power_off(void)
153{
154 machine_shutdown();
155 do_kernel_power_off();
156 smp_send_stop();
157 machine_hang();
158}
159/* Used by the G5 thermal driver */
160EXPORT_SYMBOL_GPL(machine_power_off);
161
162void (*pm_power_off)(void);
163EXPORT_SYMBOL_GPL(pm_power_off);
164
165size_t __must_check arch_get_random_seed_longs(unsigned long *v, size_t max_longs)
166{
167 if (max_longs && ppc_md.get_random_seed && ppc_md.get_random_seed(v))
168 return 1;
169 return 0;
170}
171EXPORT_SYMBOL(arch_get_random_seed_longs);
172
173void machine_halt(void)
174{
175 machine_shutdown();
176 if (ppc_md.halt)
177 ppc_md.halt();
178
179 smp_send_stop();
180 machine_hang();
181}
182
183#ifdef CONFIG_SMP
184DEFINE_PER_CPU(unsigned int, cpu_pvr);
185#endif
186
187static void show_cpuinfo_summary(struct seq_file *m)
188{
189 struct device_node *root;
190 const char *model = NULL;
191 unsigned long bogosum = 0;
192 int i;
193
194 if (IS_ENABLED(CONFIG_SMP) && IS_ENABLED(CONFIG_PPC32)) {
195 for_each_online_cpu(i)
196 bogosum += loops_per_jiffy;
197 seq_printf(m, "total bogomips\t: %lu.%02lu\n",
198 bogosum / (500000 / HZ), bogosum / (5000 / HZ) % 100);
199 }
200 seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
201 if (ppc_md.name)
202 seq_printf(m, "platform\t: %s\n", ppc_md.name);
203 root = of_find_node_by_path("/");
204 if (root)
205 model = of_get_property(root, "model", NULL);
206 if (model)
207 seq_printf(m, "model\t\t: %s\n", model);
208 of_node_put(root);
209
210 if (ppc_md.show_cpuinfo != NULL)
211 ppc_md.show_cpuinfo(m);
212
213 /* Display the amount of memory */
214 if (IS_ENABLED(CONFIG_PPC32))
215 seq_printf(m, "Memory\t\t: %d MB\n",
216 (unsigned int)(total_memory / (1024 * 1024)));
217}
218
219static int show_cpuinfo(struct seq_file *m, void *v)
220{
221 unsigned long cpu_id = (unsigned long)v - 1;
222 unsigned int pvr;
223 unsigned long proc_freq;
224 unsigned short maj;
225 unsigned short min;
226
227#ifdef CONFIG_SMP
228 pvr = per_cpu(cpu_pvr, cpu_id);
229#else
230 pvr = mfspr(SPRN_PVR);
231#endif
232 maj = (pvr >> 8) & 0xFF;
233 min = pvr & 0xFF;
234
235 seq_printf(m, "processor\t: %lu\ncpu\t\t: ", cpu_id);
236
237 if (cur_cpu_spec->pvr_mask && cur_cpu_spec->cpu_name)
238 seq_puts(m, cur_cpu_spec->cpu_name);
239 else
240 seq_printf(m, "unknown (%08x)", pvr);
241
242 if (cpu_has_feature(CPU_FTR_ALTIVEC))
243 seq_puts(m, ", altivec supported");
244
245 seq_putc(m, '\n');
246
247#ifdef CONFIG_TAU
248 if (cpu_has_feature(CPU_FTR_TAU)) {
249 if (IS_ENABLED(CONFIG_TAU_AVERAGE)) {
250 /* more straightforward, but potentially misleading */
251 seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
252 cpu_temp(cpu_id));
253 } else {
254 /* show the actual temp sensor range */
255 u32 temp;
256 temp = cpu_temp_both(cpu_id);
257 seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
258 temp & 0xff, temp >> 16);
259 }
260 }
261#endif /* CONFIG_TAU */
262
263 /*
264 * Platforms that have variable clock rates, should implement
265 * the method ppc_md.get_proc_freq() that reports the clock
266 * rate of a given cpu. The rest can use ppc_proc_freq to
267 * report the clock rate that is same across all cpus.
268 */
269 if (ppc_md.get_proc_freq)
270 proc_freq = ppc_md.get_proc_freq(cpu_id);
271 else
272 proc_freq = ppc_proc_freq;
273
274 if (proc_freq)
275 seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
276 proc_freq / 1000000, proc_freq % 1000000);
277
278 /* If we are a Freescale core do a simple check so
279 * we don't have to keep adding cases in the future */
280 if (PVR_VER(pvr) & 0x8000) {
281 switch (PVR_VER(pvr)) {
282 case 0x8000: /* 7441/7450/7451, Voyager */
283 case 0x8001: /* 7445/7455, Apollo 6 */
284 case 0x8002: /* 7447/7457, Apollo 7 */
285 case 0x8003: /* 7447A, Apollo 7 PM */
286 case 0x8004: /* 7448, Apollo 8 */
287 case 0x800c: /* 7410, Nitro */
288 maj = ((pvr >> 8) & 0xF);
289 min = PVR_MIN(pvr);
290 break;
291 default: /* e500/book-e */
292 maj = PVR_MAJ(pvr);
293 min = PVR_MIN(pvr);
294 break;
295 }
296 } else {
297 switch (PVR_VER(pvr)) {
298 case 0x1008: /* 740P/750P ?? */
299 maj = ((pvr >> 8) & 0xFF) - 1;
300 min = pvr & 0xFF;
301 break;
302 case 0x004e: /* POWER9 bits 12-15 give chip type */
303 case 0x0080: /* POWER10 bit 12 gives SMT8/4 */
304 maj = (pvr >> 8) & 0x0F;
305 min = pvr & 0xFF;
306 break;
307 default:
308 maj = (pvr >> 8) & 0xFF;
309 min = pvr & 0xFF;
310 break;
311 }
312 }
313
314 seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
315 maj, min, PVR_VER(pvr), PVR_REV(pvr));
316
317 if (IS_ENABLED(CONFIG_PPC32))
318 seq_printf(m, "bogomips\t: %lu.%02lu\n", loops_per_jiffy / (500000 / HZ),
319 (loops_per_jiffy / (5000 / HZ)) % 100);
320
321 seq_putc(m, '\n');
322
323 /* If this is the last cpu, print the summary */
324 if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
325 show_cpuinfo_summary(m);
326
327 return 0;
328}
329
330static void *c_start(struct seq_file *m, loff_t *pos)
331{
332 if (*pos == 0) /* just in case, cpu 0 is not the first */
333 *pos = cpumask_first(cpu_online_mask);
334 else
335 *pos = cpumask_next(*pos - 1, cpu_online_mask);
336 if ((*pos) < nr_cpu_ids)
337 return (void *)(unsigned long)(*pos + 1);
338 return NULL;
339}
340
341static void *c_next(struct seq_file *m, void *v, loff_t *pos)
342{
343 (*pos)++;
344 return c_start(m, pos);
345}
346
347static void c_stop(struct seq_file *m, void *v)
348{
349}
350
351const struct seq_operations cpuinfo_op = {
352 .start = c_start,
353 .next = c_next,
354 .stop = c_stop,
355 .show = show_cpuinfo,
356};
357
358void __init check_for_initrd(void)
359{
360#ifdef CONFIG_BLK_DEV_INITRD
361 DBG(" -> check_for_initrd() initrd_start=0x%lx initrd_end=0x%lx\n",
362 initrd_start, initrd_end);
363
364 /* If we were passed an initrd, set the ROOT_DEV properly if the values
365 * look sensible. If not, clear initrd reference.
366 */
367 if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) &&
368 initrd_end > initrd_start)
369 ROOT_DEV = Root_RAM0;
370 else
371 initrd_start = initrd_end = 0;
372
373 if (initrd_start)
374 pr_info("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
375
376 DBG(" <- check_for_initrd()\n");
377#endif /* CONFIG_BLK_DEV_INITRD */
378}
379
380#ifdef CONFIG_SMP
381
382int threads_per_core, threads_per_subcore, threads_shift __read_mostly;
383cpumask_t threads_core_mask __read_mostly;
384EXPORT_SYMBOL_GPL(threads_per_core);
385EXPORT_SYMBOL_GPL(threads_per_subcore);
386EXPORT_SYMBOL_GPL(threads_shift);
387EXPORT_SYMBOL_GPL(threads_core_mask);
388
389static void __init cpu_init_thread_core_maps(int tpc)
390{
391 int i;
392
393 threads_per_core = tpc;
394 threads_per_subcore = tpc;
395 cpumask_clear(&threads_core_mask);
396
397 /* This implementation only supports power of 2 number of threads
398 * for simplicity and performance
399 */
400 threads_shift = ilog2(tpc);
401 BUG_ON(tpc != (1 << threads_shift));
402
403 for (i = 0; i < tpc; i++)
404 cpumask_set_cpu(i, &threads_core_mask);
405
406 printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n",
407 tpc, tpc > 1 ? "s" : "");
408 printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift);
409}
410
411
412u32 *cpu_to_phys_id = NULL;
413
414/**
415 * setup_cpu_maps - initialize the following cpu maps:
416 * cpu_possible_mask
417 * cpu_present_mask
418 *
419 * Having the possible map set up early allows us to restrict allocations
420 * of things like irqstacks to nr_cpu_ids rather than NR_CPUS.
421 *
422 * We do not initialize the online map here; cpus set their own bits in
423 * cpu_online_mask as they come up.
424 *
425 * This function is valid only for Open Firmware systems. finish_device_tree
426 * must be called before using this.
427 *
428 * While we're here, we may as well set the "physical" cpu ids in the paca.
429 *
430 * NOTE: This must match the parsing done in early_init_dt_scan_cpus.
431 */
432void __init smp_setup_cpu_maps(void)
433{
434 struct device_node *dn;
435 int cpu = 0;
436 int nthreads = 1;
437
438 DBG("smp_setup_cpu_maps()\n");
439
440 cpu_to_phys_id = memblock_alloc(nr_cpu_ids * sizeof(u32),
441 __alignof__(u32));
442 if (!cpu_to_phys_id)
443 panic("%s: Failed to allocate %zu bytes align=0x%zx\n",
444 __func__, nr_cpu_ids * sizeof(u32), __alignof__(u32));
445
446 for_each_node_by_type(dn, "cpu") {
447 const __be32 *intserv;
448 __be32 cpu_be;
449 int j, len;
450
451 DBG(" * %pOF...\n", dn);
452
453 intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s",
454 &len);
455 if (intserv) {
456 DBG(" ibm,ppc-interrupt-server#s -> %lu threads\n",
457 (len / sizeof(int)));
458 } else {
459 DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n");
460 intserv = of_get_property(dn, "reg", &len);
461 if (!intserv) {
462 cpu_be = cpu_to_be32(cpu);
463 /* XXX: what is this? uninitialized?? */
464 intserv = &cpu_be; /* assume logical == phys */
465 len = 4;
466 }
467 }
468
469 nthreads = len / sizeof(int);
470
471 for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
472 bool avail;
473
474 DBG(" thread %d -> cpu %d (hard id %d)\n",
475 j, cpu, be32_to_cpu(intserv[j]));
476
477 avail = of_device_is_available(dn);
478 if (!avail)
479 avail = !of_property_match_string(dn,
480 "enable-method", "spin-table");
481
482 set_cpu_present(cpu, avail);
483 set_cpu_possible(cpu, true);
484 cpu_to_phys_id[cpu] = be32_to_cpu(intserv[j]);
485 cpu++;
486 }
487
488 if (cpu >= nr_cpu_ids) {
489 of_node_put(dn);
490 break;
491 }
492 }
493
494 /* If no SMT supported, nthreads is forced to 1 */
495 if (!cpu_has_feature(CPU_FTR_SMT)) {
496 DBG(" SMT disabled ! nthreads forced to 1\n");
497 nthreads = 1;
498 }
499
500#ifdef CONFIG_PPC64
501 /*
502 * On pSeries LPAR, we need to know how many cpus
503 * could possibly be added to this partition.
504 */
505 if (firmware_has_feature(FW_FEATURE_LPAR) &&
506 (dn = of_find_node_by_path("/rtas"))) {
507 int num_addr_cell, num_size_cell, maxcpus;
508 const __be32 *ireg;
509
510 num_addr_cell = of_n_addr_cells(dn);
511 num_size_cell = of_n_size_cells(dn);
512
513 ireg = of_get_property(dn, "ibm,lrdr-capacity", NULL);
514
515 if (!ireg)
516 goto out;
517
518 maxcpus = be32_to_cpup(ireg + num_addr_cell + num_size_cell);
519
520 /* Double maxcpus for processors which have SMT capability */
521 if (cpu_has_feature(CPU_FTR_SMT))
522 maxcpus *= nthreads;
523
524 if (maxcpus > nr_cpu_ids) {
525 printk(KERN_WARNING
526 "Partition configured for %d cpus, "
527 "operating system maximum is %u.\n",
528 maxcpus, nr_cpu_ids);
529 maxcpus = nr_cpu_ids;
530 } else
531 printk(KERN_INFO "Partition configured for %d cpus.\n",
532 maxcpus);
533
534 for (cpu = 0; cpu < maxcpus; cpu++)
535 set_cpu_possible(cpu, true);
536 out:
537 of_node_put(dn);
538 }
539 vdso_data->processorCount = num_present_cpus();
540#endif /* CONFIG_PPC64 */
541
542 /* Initialize CPU <=> thread mapping/
543 *
544 * WARNING: We assume that the number of threads is the same for
545 * every CPU in the system. If that is not the case, then some code
546 * here will have to be reworked
547 */
548 cpu_init_thread_core_maps(nthreads);
549
550 /* Now that possible cpus are set, set nr_cpu_ids for later use */
551 setup_nr_cpu_ids();
552
553 free_unused_pacas();
554}
555#endif /* CONFIG_SMP */
556
557#ifdef CONFIG_PCSPKR_PLATFORM
558static __init int add_pcspkr(void)
559{
560 struct device_node *np;
561 struct platform_device *pd;
562 int ret;
563
564 np = of_find_compatible_node(NULL, NULL, "pnpPNP,100");
565 of_node_put(np);
566 if (!np)
567 return -ENODEV;
568
569 pd = platform_device_alloc("pcspkr", -1);
570 if (!pd)
571 return -ENOMEM;
572
573 ret = platform_device_add(pd);
574 if (ret)
575 platform_device_put(pd);
576
577 return ret;
578}
579device_initcall(add_pcspkr);
580#endif /* CONFIG_PCSPKR_PLATFORM */
581
582static char ppc_hw_desc_buf[128] __initdata;
583
584struct seq_buf ppc_hw_desc __initdata = {
585 .buffer = ppc_hw_desc_buf,
586 .size = sizeof(ppc_hw_desc_buf),
587 .len = 0,
588};
589
590static __init void probe_machine(void)
591{
592 extern struct machdep_calls __machine_desc_start;
593 extern struct machdep_calls __machine_desc_end;
594 unsigned int i;
595
596 /*
597 * Iterate all ppc_md structures until we find the proper
598 * one for the current machine type
599 */
600 DBG("Probing machine type ...\n");
601
602 /*
603 * Check ppc_md is empty, if not we have a bug, ie, we setup an
604 * entry before probe_machine() which will be overwritten
605 */
606 for (i = 0; i < (sizeof(ppc_md) / sizeof(void *)); i++) {
607 if (((void **)&ppc_md)[i]) {
608 printk(KERN_ERR "Entry %d in ppc_md non empty before"
609 " machine probe !\n", i);
610 }
611 }
612
613 for (machine_id = &__machine_desc_start;
614 machine_id < &__machine_desc_end;
615 machine_id++) {
616 DBG(" %s ...\n", machine_id->name);
617 if (machine_id->compatible && !of_machine_is_compatible(machine_id->compatible))
618 continue;
619 memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
620 if (ppc_md.probe && !ppc_md.probe())
621 continue;
622 DBG(" %s match !\n", machine_id->name);
623 break;
624 }
625 /* What can we do if we didn't find ? */
626 if (machine_id >= &__machine_desc_end) {
627 pr_err("No suitable machine description found !\n");
628 for (;;);
629 }
630
631 // Append the machine name to other info we've gathered
632 seq_buf_puts(&ppc_hw_desc, ppc_md.name);
633
634 // Set the generic hardware description shown in oopses
635 dump_stack_set_arch_desc(ppc_hw_desc.buffer);
636
637 pr_info("Hardware name: %s\n", ppc_hw_desc.buffer);
638}
639
640/* Match a class of boards, not a specific device configuration. */
641int check_legacy_ioport(unsigned long base_port)
642{
643 struct device_node *parent, *np = NULL;
644 int ret = -ENODEV;
645
646 switch(base_port) {
647 case I8042_DATA_REG:
648 if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303")))
649 np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03");
650 if (np) {
651 parent = of_get_parent(np);
652
653 of_i8042_kbd_irq = irq_of_parse_and_map(parent, 0);
654 if (!of_i8042_kbd_irq)
655 of_i8042_kbd_irq = 1;
656
657 of_i8042_aux_irq = irq_of_parse_and_map(parent, 1);
658 if (!of_i8042_aux_irq)
659 of_i8042_aux_irq = 12;
660
661 of_node_put(np);
662 np = parent;
663 break;
664 }
665 np = of_find_node_by_type(NULL, "8042");
666 /* Pegasos has no device_type on its 8042 node, look for the
667 * name instead */
668 if (!np)
669 np = of_find_node_by_name(NULL, "8042");
670 if (np) {
671 of_i8042_kbd_irq = 1;
672 of_i8042_aux_irq = 12;
673 }
674 break;
675 case FDC_BASE: /* FDC1 */
676 np = of_find_node_by_type(NULL, "fdc");
677 break;
678 default:
679 /* ipmi is supposed to fail here */
680 break;
681 }
682 if (!np)
683 return ret;
684 parent = of_get_parent(np);
685 if (parent) {
686 if (of_node_is_type(parent, "isa"))
687 ret = 0;
688 of_node_put(parent);
689 }
690 of_node_put(np);
691 return ret;
692}
693EXPORT_SYMBOL(check_legacy_ioport);
694
695/*
696 * Panic notifiers setup
697 *
698 * We have 3 notifiers for powerpc, each one from a different "nature":
699 *
700 * - ppc_panic_fadump_handler() is a hypervisor notifier, which hard-disables
701 * IRQs and deal with the Firmware-Assisted dump, when it is configured;
702 * should run early in the panic path.
703 *
704 * - dump_kernel_offset() is an informative notifier, just showing the KASLR
705 * offset if we have RANDOMIZE_BASE set.
706 *
707 * - ppc_panic_platform_handler() is a low-level handler that's registered
708 * only if the platform wishes to perform final actions in the panic path,
709 * hence it should run late and might not even return. Currently, only
710 * pseries and ps3 platforms register callbacks.
711 */
712static int ppc_panic_fadump_handler(struct notifier_block *this,
713 unsigned long event, void *ptr)
714{
715 /*
716 * panic does a local_irq_disable, but we really
717 * want interrupts to be hard disabled.
718 */
719 hard_irq_disable();
720
721 /*
722 * If firmware-assisted dump has been registered then trigger
723 * its callback and let the firmware handles everything else.
724 */
725 crash_fadump(NULL, ptr);
726
727 return NOTIFY_DONE;
728}
729
730static int dump_kernel_offset(struct notifier_block *self, unsigned long v,
731 void *p)
732{
733 pr_emerg("Kernel Offset: 0x%lx from 0x%lx\n",
734 kaslr_offset(), KERNELBASE);
735
736 return NOTIFY_DONE;
737}
738
739static int ppc_panic_platform_handler(struct notifier_block *this,
740 unsigned long event, void *ptr)
741{
742 /*
743 * This handler is only registered if we have a panic callback
744 * on ppc_md, hence NULL check is not needed.
745 * Also, it may not return, so it runs really late on panic path.
746 */
747 ppc_md.panic(ptr);
748
749 return NOTIFY_DONE;
750}
751
752static struct notifier_block ppc_fadump_block = {
753 .notifier_call = ppc_panic_fadump_handler,
754 .priority = INT_MAX, /* run early, to notify the firmware ASAP */
755};
756
757static struct notifier_block kernel_offset_notifier = {
758 .notifier_call = dump_kernel_offset,
759};
760
761static struct notifier_block ppc_panic_block = {
762 .notifier_call = ppc_panic_platform_handler,
763 .priority = INT_MIN, /* may not return; must be done last */
764};
765
766void __init setup_panic(void)
767{
768 /* Hard-disables IRQs + deal with FW-assisted dump (fadump) */
769 atomic_notifier_chain_register(&panic_notifier_list,
770 &ppc_fadump_block);
771
772 if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && kaslr_offset() > 0)
773 atomic_notifier_chain_register(&panic_notifier_list,
774 &kernel_offset_notifier);
775
776 /* Low-level platform-specific routines that should run on panic */
777 if (ppc_md.panic)
778 atomic_notifier_chain_register(&panic_notifier_list,
779 &ppc_panic_block);
780}
781
782#ifdef CONFIG_CHECK_CACHE_COHERENCY
783/*
784 * For platforms that have configurable cache-coherency. This function
785 * checks that the cache coherency setting of the kernel matches the setting
786 * left by the firmware, as indicated in the device tree. Since a mismatch
787 * will eventually result in DMA failures, we print * and error and call
788 * BUG() in that case.
789 */
790
791#define KERNEL_COHERENCY (!IS_ENABLED(CONFIG_NOT_COHERENT_CACHE))
792
793static int __init check_cache_coherency(void)
794{
795 struct device_node *np;
796 const void *prop;
797 bool devtree_coherency;
798
799 np = of_find_node_by_path("/");
800 prop = of_get_property(np, "coherency-off", NULL);
801 of_node_put(np);
802
803 devtree_coherency = prop ? false : true;
804
805 if (devtree_coherency != KERNEL_COHERENCY) {
806 printk(KERN_ERR
807 "kernel coherency:%s != device tree_coherency:%s\n",
808 KERNEL_COHERENCY ? "on" : "off",
809 devtree_coherency ? "on" : "off");
810 BUG();
811 }
812
813 return 0;
814}
815
816late_initcall(check_cache_coherency);
817#endif /* CONFIG_CHECK_CACHE_COHERENCY */
818
819void ppc_printk_progress(char *s, unsigned short hex)
820{
821 pr_info("%s\n", s);
822}
823
824static __init void print_system_info(void)
825{
826 pr_info("-----------------------------------------------------\n");
827 pr_info("phys_mem_size = 0x%llx\n",
828 (unsigned long long)memblock_phys_mem_size());
829
830 pr_info("dcache_bsize = 0x%x\n", dcache_bsize);
831 pr_info("icache_bsize = 0x%x\n", icache_bsize);
832
833 pr_info("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features);
834 pr_info(" possible = 0x%016lx\n",
835 (unsigned long)CPU_FTRS_POSSIBLE);
836 pr_info(" always = 0x%016lx\n",
837 (unsigned long)CPU_FTRS_ALWAYS);
838 pr_info("cpu_user_features = 0x%08x 0x%08x\n",
839 cur_cpu_spec->cpu_user_features,
840 cur_cpu_spec->cpu_user_features2);
841 pr_info("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features);
842#ifdef CONFIG_PPC64
843 pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features);
844#ifdef CONFIG_PPC_BOOK3S
845 pr_info("vmalloc start = 0x%lx\n", KERN_VIRT_START);
846 pr_info("IO start = 0x%lx\n", KERN_IO_START);
847 pr_info("vmemmap start = 0x%lx\n", (unsigned long)vmemmap);
848#endif
849#endif
850
851 if (!early_radix_enabled())
852 print_system_hash_info();
853
854 if (PHYSICAL_START > 0)
855 pr_info("physical_start = 0x%llx\n",
856 (unsigned long long)PHYSICAL_START);
857 pr_info("-----------------------------------------------------\n");
858}
859
860#ifdef CONFIG_SMP
861static void __init smp_setup_pacas(void)
862{
863 int cpu;
864
865 for_each_possible_cpu(cpu) {
866 if (cpu == smp_processor_id())
867 continue;
868 allocate_paca(cpu);
869 set_hard_smp_processor_id(cpu, cpu_to_phys_id[cpu]);
870 }
871
872 memblock_free(cpu_to_phys_id, nr_cpu_ids * sizeof(u32));
873 cpu_to_phys_id = NULL;
874}
875#endif
876
877/*
878 * Called into from start_kernel this initializes memblock, which is used
879 * to manage page allocation until mem_init is called.
880 */
881void __init setup_arch(char **cmdline_p)
882{
883 kasan_init();
884
885 *cmdline_p = boot_command_line;
886
887 /* Set a half-reasonable default so udelay does something sensible */
888 loops_per_jiffy = 500000000 / HZ;
889
890 /* Unflatten the device-tree passed by prom_init or kexec */
891 unflatten_device_tree();
892
893 /*
894 * Initialize cache line/block info from device-tree (on ppc64) or
895 * just cputable (on ppc32).
896 */
897 initialize_cache_info();
898
899 /* Initialize RTAS if available. */
900 rtas_initialize();
901
902 /* Check if we have an initrd provided via the device-tree. */
903 check_for_initrd();
904
905 /* Probe the machine type, establish ppc_md. */
906 probe_machine();
907
908 /* Setup panic notifier if requested by the platform. */
909 setup_panic();
910
911 /*
912 * Configure ppc_md.power_save (ppc32 only, 64-bit machines do
913 * it from their respective probe() function.
914 */
915 setup_power_save();
916
917 /* Discover standard serial ports. */
918 find_legacy_serial_ports();
919
920 /* Register early console with the printk subsystem. */
921 register_early_udbg_console();
922
923 /* Setup the various CPU maps based on the device-tree. */
924 smp_setup_cpu_maps();
925
926 /* Initialize xmon. */
927 xmon_setup();
928
929 /* Check the SMT related command line arguments (ppc64). */
930 check_smt_enabled();
931
932 /* Parse memory topology */
933 mem_topology_setup();
934 /* Set max_mapnr before paging_init() */
935 set_max_mapnr(max_pfn);
936
937 /*
938 * Release secondary cpus out of their spinloops at 0x60 now that
939 * we can map physical -> logical CPU ids.
940 *
941 * Freescale Book3e parts spin in a loop provided by firmware,
942 * so smp_release_cpus() does nothing for them.
943 */
944#ifdef CONFIG_SMP
945 smp_setup_pacas();
946
947 /* On BookE, setup per-core TLB data structures. */
948 setup_tlb_core_data();
949#endif
950
951 /* Print various info about the machine that has been gathered so far. */
952 print_system_info();
953
954 klp_init_thread_info(&init_task);
955
956 setup_initial_init_mm(_stext, _etext, _edata, _end);
957 /* sched_init() does the mmgrab(&init_mm) for the primary CPU */
958 VM_WARN_ON(cpumask_test_cpu(smp_processor_id(), mm_cpumask(&init_mm)));
959 cpumask_set_cpu(smp_processor_id(), mm_cpumask(&init_mm));
960 inc_mm_active_cpus(&init_mm);
961 mm_iommu_init(&init_mm);
962
963 irqstack_early_init();
964 exc_lvl_early_init();
965 emergency_stack_init();
966
967 mce_init();
968 smp_release_cpus();
969
970 initmem_init();
971
972 /*
973 * Reserve large chunks of memory for use by CMA for KVM and hugetlb. These must
974 * be called after initmem_init(), so that pageblock_order is initialised.
975 */
976 kvm_cma_reserve();
977 gigantic_hugetlb_cma_reserve();
978
979 early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT);
980
981 if (ppc_md.setup_arch)
982 ppc_md.setup_arch();
983
984 setup_barrier_nospec();
985 setup_spectre_v2();
986
987 paging_init();
988
989 /* Initialize the MMU context management stuff. */
990 mmu_context_init();
991
992 /* Interrupt code needs to be 64K-aligned. */
993 if (IS_ENABLED(CONFIG_PPC64) && (unsigned long)_stext & 0xffff)
994 panic("Kernelbase not 64K-aligned (0x%lx)!\n",
995 (unsigned long)_stext);
996}
1/*
2 * Common boot and setup code for both 32-bit and 64-bit.
3 * Extracted from arch/powerpc/kernel/setup_64.c.
4 *
5 * Copyright (C) 2001 PPC64 Team, IBM Corp
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
11 */
12
13#undef DEBUG
14
15#include <linux/export.h>
16#include <linux/string.h>
17#include <linux/sched.h>
18#include <linux/init.h>
19#include <linux/kernel.h>
20#include <linux/reboot.h>
21#include <linux/delay.h>
22#include <linux/initrd.h>
23#include <linux/platform_device.h>
24#include <linux/seq_file.h>
25#include <linux/ioport.h>
26#include <linux/console.h>
27#include <linux/screen_info.h>
28#include <linux/root_dev.h>
29#include <linux/notifier.h>
30#include <linux/cpu.h>
31#include <linux/unistd.h>
32#include <linux/serial.h>
33#include <linux/serial_8250.h>
34#include <linux/debugfs.h>
35#include <linux/percpu.h>
36#include <linux/memblock.h>
37#include <linux/of_platform.h>
38#include <linux/hugetlb.h>
39#include <asm/io.h>
40#include <asm/paca.h>
41#include <asm/prom.h>
42#include <asm/processor.h>
43#include <asm/vdso_datapage.h>
44#include <asm/pgtable.h>
45#include <asm/smp.h>
46#include <asm/elf.h>
47#include <asm/machdep.h>
48#include <asm/time.h>
49#include <asm/cputable.h>
50#include <asm/sections.h>
51#include <asm/firmware.h>
52#include <asm/btext.h>
53#include <asm/nvram.h>
54#include <asm/setup.h>
55#include <asm/rtas.h>
56#include <asm/iommu.h>
57#include <asm/serial.h>
58#include <asm/cache.h>
59#include <asm/page.h>
60#include <asm/mmu.h>
61#include <asm/xmon.h>
62#include <asm/cputhreads.h>
63#include <mm/mmu_decl.h>
64#include <asm/fadump.h>
65#include <asm/udbg.h>
66#include <asm/hugetlb.h>
67#include <asm/livepatch.h>
68#include <asm/mmu_context.h>
69#include <asm/cpu_has_feature.h>
70
71#include "setup.h"
72
73#ifdef DEBUG
74#include <asm/udbg.h>
75#define DBG(fmt...) udbg_printf(fmt)
76#else
77#define DBG(fmt...)
78#endif
79
80/* The main machine-dep calls structure
81 */
82struct machdep_calls ppc_md;
83EXPORT_SYMBOL(ppc_md);
84struct machdep_calls *machine_id;
85EXPORT_SYMBOL(machine_id);
86
87int boot_cpuid = -1;
88EXPORT_SYMBOL_GPL(boot_cpuid);
89
90unsigned long klimit = (unsigned long) _end;
91
92/*
93 * This still seems to be needed... -- paulus
94 */
95struct screen_info screen_info = {
96 .orig_x = 0,
97 .orig_y = 25,
98 .orig_video_cols = 80,
99 .orig_video_lines = 25,
100 .orig_video_isVGA = 1,
101 .orig_video_points = 16
102};
103#if defined(CONFIG_FB_VGA16_MODULE)
104EXPORT_SYMBOL(screen_info);
105#endif
106
107/* Variables required to store legacy IO irq routing */
108int of_i8042_kbd_irq;
109EXPORT_SYMBOL_GPL(of_i8042_kbd_irq);
110int of_i8042_aux_irq;
111EXPORT_SYMBOL_GPL(of_i8042_aux_irq);
112
113#ifdef __DO_IRQ_CANON
114/* XXX should go elsewhere eventually */
115int ppc_do_canonicalize_irqs;
116EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
117#endif
118
119/* also used by kexec */
120void machine_shutdown(void)
121{
122#ifdef CONFIG_FA_DUMP
123 /*
124 * if fadump is active, cleanup the fadump registration before we
125 * shutdown.
126 */
127 fadump_cleanup();
128#endif
129
130 if (ppc_md.machine_shutdown)
131 ppc_md.machine_shutdown();
132}
133
134static void machine_hang(void)
135{
136 pr_emerg("System Halted, OK to turn off power\n");
137 local_irq_disable();
138 while (1)
139 ;
140}
141
142void machine_restart(char *cmd)
143{
144 machine_shutdown();
145 if (ppc_md.restart)
146 ppc_md.restart(cmd);
147
148 smp_send_stop();
149
150 do_kernel_restart(cmd);
151 mdelay(1000);
152
153 machine_hang();
154}
155
156void machine_power_off(void)
157{
158 machine_shutdown();
159 if (pm_power_off)
160 pm_power_off();
161
162 smp_send_stop();
163 machine_hang();
164}
165/* Used by the G5 thermal driver */
166EXPORT_SYMBOL_GPL(machine_power_off);
167
168void (*pm_power_off)(void);
169EXPORT_SYMBOL_GPL(pm_power_off);
170
171void machine_halt(void)
172{
173 machine_shutdown();
174 if (ppc_md.halt)
175 ppc_md.halt();
176
177 smp_send_stop();
178 machine_hang();
179}
180
181
182#ifdef CONFIG_TAU
183extern u32 cpu_temp(unsigned long cpu);
184extern u32 cpu_temp_both(unsigned long cpu);
185#endif /* CONFIG_TAU */
186
187#ifdef CONFIG_SMP
188DEFINE_PER_CPU(unsigned int, cpu_pvr);
189#endif
190
191static void show_cpuinfo_summary(struct seq_file *m)
192{
193 struct device_node *root;
194 const char *model = NULL;
195#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
196 unsigned long bogosum = 0;
197 int i;
198 for_each_online_cpu(i)
199 bogosum += loops_per_jiffy;
200 seq_printf(m, "total bogomips\t: %lu.%02lu\n",
201 bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
202#endif /* CONFIG_SMP && CONFIG_PPC32 */
203 seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
204 if (ppc_md.name)
205 seq_printf(m, "platform\t: %s\n", ppc_md.name);
206 root = of_find_node_by_path("/");
207 if (root)
208 model = of_get_property(root, "model", NULL);
209 if (model)
210 seq_printf(m, "model\t\t: %s\n", model);
211 of_node_put(root);
212
213 if (ppc_md.show_cpuinfo != NULL)
214 ppc_md.show_cpuinfo(m);
215
216#ifdef CONFIG_PPC32
217 /* Display the amount of memory */
218 seq_printf(m, "Memory\t\t: %d MB\n",
219 (unsigned int)(total_memory / (1024 * 1024)));
220#endif
221}
222
223static int show_cpuinfo(struct seq_file *m, void *v)
224{
225 unsigned long cpu_id = (unsigned long)v - 1;
226 unsigned int pvr;
227 unsigned long proc_freq;
228 unsigned short maj;
229 unsigned short min;
230
231 /* We only show online cpus: disable preempt (overzealous, I
232 * knew) to prevent cpu going down. */
233 preempt_disable();
234 if (!cpu_online(cpu_id)) {
235 preempt_enable();
236 return 0;
237 }
238
239#ifdef CONFIG_SMP
240 pvr = per_cpu(cpu_pvr, cpu_id);
241#else
242 pvr = mfspr(SPRN_PVR);
243#endif
244 maj = (pvr >> 8) & 0xFF;
245 min = pvr & 0xFF;
246
247 seq_printf(m, "processor\t: %lu\n", cpu_id);
248 seq_printf(m, "cpu\t\t: ");
249
250 if (cur_cpu_spec->pvr_mask)
251 seq_printf(m, "%s", cur_cpu_spec->cpu_name);
252 else
253 seq_printf(m, "unknown (%08x)", pvr);
254
255#ifdef CONFIG_ALTIVEC
256 if (cpu_has_feature(CPU_FTR_ALTIVEC))
257 seq_printf(m, ", altivec supported");
258#endif /* CONFIG_ALTIVEC */
259
260 seq_printf(m, "\n");
261
262#ifdef CONFIG_TAU
263 if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
264#ifdef CONFIG_TAU_AVERAGE
265 /* more straightforward, but potentially misleading */
266 seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
267 cpu_temp(cpu_id));
268#else
269 /* show the actual temp sensor range */
270 u32 temp;
271 temp = cpu_temp_both(cpu_id);
272 seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
273 temp & 0xff, temp >> 16);
274#endif
275 }
276#endif /* CONFIG_TAU */
277
278 /*
279 * Platforms that have variable clock rates, should implement
280 * the method ppc_md.get_proc_freq() that reports the clock
281 * rate of a given cpu. The rest can use ppc_proc_freq to
282 * report the clock rate that is same across all cpus.
283 */
284 if (ppc_md.get_proc_freq)
285 proc_freq = ppc_md.get_proc_freq(cpu_id);
286 else
287 proc_freq = ppc_proc_freq;
288
289 if (proc_freq)
290 seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
291 proc_freq / 1000000, proc_freq % 1000000);
292
293 if (ppc_md.show_percpuinfo != NULL)
294 ppc_md.show_percpuinfo(m, cpu_id);
295
296 /* If we are a Freescale core do a simple check so
297 * we dont have to keep adding cases in the future */
298 if (PVR_VER(pvr) & 0x8000) {
299 switch (PVR_VER(pvr)) {
300 case 0x8000: /* 7441/7450/7451, Voyager */
301 case 0x8001: /* 7445/7455, Apollo 6 */
302 case 0x8002: /* 7447/7457, Apollo 7 */
303 case 0x8003: /* 7447A, Apollo 7 PM */
304 case 0x8004: /* 7448, Apollo 8 */
305 case 0x800c: /* 7410, Nitro */
306 maj = ((pvr >> 8) & 0xF);
307 min = PVR_MIN(pvr);
308 break;
309 default: /* e500/book-e */
310 maj = PVR_MAJ(pvr);
311 min = PVR_MIN(pvr);
312 break;
313 }
314 } else {
315 switch (PVR_VER(pvr)) {
316 case 0x0020: /* 403 family */
317 maj = PVR_MAJ(pvr) + 1;
318 min = PVR_MIN(pvr);
319 break;
320 case 0x1008: /* 740P/750P ?? */
321 maj = ((pvr >> 8) & 0xFF) - 1;
322 min = pvr & 0xFF;
323 break;
324 default:
325 maj = (pvr >> 8) & 0xFF;
326 min = pvr & 0xFF;
327 break;
328 }
329 }
330
331 seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
332 maj, min, PVR_VER(pvr), PVR_REV(pvr));
333
334#ifdef CONFIG_PPC32
335 seq_printf(m, "bogomips\t: %lu.%02lu\n",
336 loops_per_jiffy / (500000/HZ),
337 (loops_per_jiffy / (5000/HZ)) % 100);
338#endif
339
340#ifdef CONFIG_SMP
341 seq_printf(m, "\n");
342#endif
343
344 preempt_enable();
345
346 /* If this is the last cpu, print the summary */
347 if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
348 show_cpuinfo_summary(m);
349
350 return 0;
351}
352
353static void *c_start(struct seq_file *m, loff_t *pos)
354{
355 if (*pos == 0) /* just in case, cpu 0 is not the first */
356 *pos = cpumask_first(cpu_online_mask);
357 else
358 *pos = cpumask_next(*pos - 1, cpu_online_mask);
359 if ((*pos) < nr_cpu_ids)
360 return (void *)(unsigned long)(*pos + 1);
361 return NULL;
362}
363
364static void *c_next(struct seq_file *m, void *v, loff_t *pos)
365{
366 (*pos)++;
367 return c_start(m, pos);
368}
369
370static void c_stop(struct seq_file *m, void *v)
371{
372}
373
374const struct seq_operations cpuinfo_op = {
375 .start =c_start,
376 .next = c_next,
377 .stop = c_stop,
378 .show = show_cpuinfo,
379};
380
381void __init check_for_initrd(void)
382{
383#ifdef CONFIG_BLK_DEV_INITRD
384 DBG(" -> check_for_initrd() initrd_start=0x%lx initrd_end=0x%lx\n",
385 initrd_start, initrd_end);
386
387 /* If we were passed an initrd, set the ROOT_DEV properly if the values
388 * look sensible. If not, clear initrd reference.
389 */
390 if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) &&
391 initrd_end > initrd_start)
392 ROOT_DEV = Root_RAM0;
393 else
394 initrd_start = initrd_end = 0;
395
396 if (initrd_start)
397 pr_info("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
398
399 DBG(" <- check_for_initrd()\n");
400#endif /* CONFIG_BLK_DEV_INITRD */
401}
402
403#ifdef CONFIG_SMP
404
405int threads_per_core, threads_per_subcore, threads_shift;
406cpumask_t threads_core_mask;
407EXPORT_SYMBOL_GPL(threads_per_core);
408EXPORT_SYMBOL_GPL(threads_per_subcore);
409EXPORT_SYMBOL_GPL(threads_shift);
410EXPORT_SYMBOL_GPL(threads_core_mask);
411
412static void __init cpu_init_thread_core_maps(int tpc)
413{
414 int i;
415
416 threads_per_core = tpc;
417 threads_per_subcore = tpc;
418 cpumask_clear(&threads_core_mask);
419
420 /* This implementation only supports power of 2 number of threads
421 * for simplicity and performance
422 */
423 threads_shift = ilog2(tpc);
424 BUG_ON(tpc != (1 << threads_shift));
425
426 for (i = 0; i < tpc; i++)
427 cpumask_set_cpu(i, &threads_core_mask);
428
429 printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n",
430 tpc, tpc > 1 ? "s" : "");
431 printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift);
432}
433
434
435/**
436 * setup_cpu_maps - initialize the following cpu maps:
437 * cpu_possible_mask
438 * cpu_present_mask
439 *
440 * Having the possible map set up early allows us to restrict allocations
441 * of things like irqstacks to nr_cpu_ids rather than NR_CPUS.
442 *
443 * We do not initialize the online map here; cpus set their own bits in
444 * cpu_online_mask as they come up.
445 *
446 * This function is valid only for Open Firmware systems. finish_device_tree
447 * must be called before using this.
448 *
449 * While we're here, we may as well set the "physical" cpu ids in the paca.
450 *
451 * NOTE: This must match the parsing done in early_init_dt_scan_cpus.
452 */
453void __init smp_setup_cpu_maps(void)
454{
455 struct device_node *dn = NULL;
456 int cpu = 0;
457 int nthreads = 1;
458
459 DBG("smp_setup_cpu_maps()\n");
460
461 while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < nr_cpu_ids) {
462 const __be32 *intserv;
463 __be32 cpu_be;
464 int j, len;
465
466 DBG(" * %s...\n", dn->full_name);
467
468 intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s",
469 &len);
470 if (intserv) {
471 DBG(" ibm,ppc-interrupt-server#s -> %d threads\n",
472 nthreads);
473 } else {
474 DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n");
475 intserv = of_get_property(dn, "reg", &len);
476 if (!intserv) {
477 cpu_be = cpu_to_be32(cpu);
478 intserv = &cpu_be; /* assume logical == phys */
479 len = 4;
480 }
481 }
482
483 nthreads = len / sizeof(int);
484
485 for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
486 bool avail;
487
488 DBG(" thread %d -> cpu %d (hard id %d)\n",
489 j, cpu, be32_to_cpu(intserv[j]));
490
491 avail = of_device_is_available(dn);
492 if (!avail)
493 avail = !of_property_match_string(dn,
494 "enable-method", "spin-table");
495
496 set_cpu_present(cpu, avail);
497 set_hard_smp_processor_id(cpu, be32_to_cpu(intserv[j]));
498 set_cpu_possible(cpu, true);
499 cpu++;
500 }
501 }
502
503 /* If no SMT supported, nthreads is forced to 1 */
504 if (!cpu_has_feature(CPU_FTR_SMT)) {
505 DBG(" SMT disabled ! nthreads forced to 1\n");
506 nthreads = 1;
507 }
508
509#ifdef CONFIG_PPC64
510 /*
511 * On pSeries LPAR, we need to know how many cpus
512 * could possibly be added to this partition.
513 */
514 if (firmware_has_feature(FW_FEATURE_LPAR) &&
515 (dn = of_find_node_by_path("/rtas"))) {
516 int num_addr_cell, num_size_cell, maxcpus;
517 const __be32 *ireg;
518
519 num_addr_cell = of_n_addr_cells(dn);
520 num_size_cell = of_n_size_cells(dn);
521
522 ireg = of_get_property(dn, "ibm,lrdr-capacity", NULL);
523
524 if (!ireg)
525 goto out;
526
527 maxcpus = be32_to_cpup(ireg + num_addr_cell + num_size_cell);
528
529 /* Double maxcpus for processors which have SMT capability */
530 if (cpu_has_feature(CPU_FTR_SMT))
531 maxcpus *= nthreads;
532
533 if (maxcpus > nr_cpu_ids) {
534 printk(KERN_WARNING
535 "Partition configured for %d cpus, "
536 "operating system maximum is %d.\n",
537 maxcpus, nr_cpu_ids);
538 maxcpus = nr_cpu_ids;
539 } else
540 printk(KERN_INFO "Partition configured for %d cpus.\n",
541 maxcpus);
542
543 for (cpu = 0; cpu < maxcpus; cpu++)
544 set_cpu_possible(cpu, true);
545 out:
546 of_node_put(dn);
547 }
548 vdso_data->processorCount = num_present_cpus();
549#endif /* CONFIG_PPC64 */
550
551 /* Initialize CPU <=> thread mapping/
552 *
553 * WARNING: We assume that the number of threads is the same for
554 * every CPU in the system. If that is not the case, then some code
555 * here will have to be reworked
556 */
557 cpu_init_thread_core_maps(nthreads);
558
559 /* Now that possible cpus are set, set nr_cpu_ids for later use */
560 setup_nr_cpu_ids();
561
562 free_unused_pacas();
563}
564#endif /* CONFIG_SMP */
565
566#ifdef CONFIG_PCSPKR_PLATFORM
567static __init int add_pcspkr(void)
568{
569 struct device_node *np;
570 struct platform_device *pd;
571 int ret;
572
573 np = of_find_compatible_node(NULL, NULL, "pnpPNP,100");
574 of_node_put(np);
575 if (!np)
576 return -ENODEV;
577
578 pd = platform_device_alloc("pcspkr", -1);
579 if (!pd)
580 return -ENOMEM;
581
582 ret = platform_device_add(pd);
583 if (ret)
584 platform_device_put(pd);
585
586 return ret;
587}
588device_initcall(add_pcspkr);
589#endif /* CONFIG_PCSPKR_PLATFORM */
590
591void probe_machine(void)
592{
593 extern struct machdep_calls __machine_desc_start;
594 extern struct machdep_calls __machine_desc_end;
595 unsigned int i;
596
597 /*
598 * Iterate all ppc_md structures until we find the proper
599 * one for the current machine type
600 */
601 DBG("Probing machine type ...\n");
602
603 /*
604 * Check ppc_md is empty, if not we have a bug, ie, we setup an
605 * entry before probe_machine() which will be overwritten
606 */
607 for (i = 0; i < (sizeof(ppc_md) / sizeof(void *)); i++) {
608 if (((void **)&ppc_md)[i]) {
609 printk(KERN_ERR "Entry %d in ppc_md non empty before"
610 " machine probe !\n", i);
611 }
612 }
613
614 for (machine_id = &__machine_desc_start;
615 machine_id < &__machine_desc_end;
616 machine_id++) {
617 DBG(" %s ...", machine_id->name);
618 memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
619 if (ppc_md.probe()) {
620 DBG(" match !\n");
621 break;
622 }
623 DBG("\n");
624 }
625 /* What can we do if we didn't find ? */
626 if (machine_id >= &__machine_desc_end) {
627 DBG("No suitable machine found !\n");
628 for (;;);
629 }
630
631 printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
632}
633
634/* Match a class of boards, not a specific device configuration. */
635int check_legacy_ioport(unsigned long base_port)
636{
637 struct device_node *parent, *np = NULL;
638 int ret = -ENODEV;
639
640 switch(base_port) {
641 case I8042_DATA_REG:
642 if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303")))
643 np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03");
644 if (np) {
645 parent = of_get_parent(np);
646
647 of_i8042_kbd_irq = irq_of_parse_and_map(parent, 0);
648 if (!of_i8042_kbd_irq)
649 of_i8042_kbd_irq = 1;
650
651 of_i8042_aux_irq = irq_of_parse_and_map(parent, 1);
652 if (!of_i8042_aux_irq)
653 of_i8042_aux_irq = 12;
654
655 of_node_put(np);
656 np = parent;
657 break;
658 }
659 np = of_find_node_by_type(NULL, "8042");
660 /* Pegasos has no device_type on its 8042 node, look for the
661 * name instead */
662 if (!np)
663 np = of_find_node_by_name(NULL, "8042");
664 if (np) {
665 of_i8042_kbd_irq = 1;
666 of_i8042_aux_irq = 12;
667 }
668 break;
669 case FDC_BASE: /* FDC1 */
670 np = of_find_node_by_type(NULL, "fdc");
671 break;
672 default:
673 /* ipmi is supposed to fail here */
674 break;
675 }
676 if (!np)
677 return ret;
678 parent = of_get_parent(np);
679 if (parent) {
680 if (strcmp(parent->type, "isa") == 0)
681 ret = 0;
682 of_node_put(parent);
683 }
684 of_node_put(np);
685 return ret;
686}
687EXPORT_SYMBOL(check_legacy_ioport);
688
689static int ppc_panic_event(struct notifier_block *this,
690 unsigned long event, void *ptr)
691{
692 /*
693 * If firmware-assisted dump has been registered then trigger
694 * firmware-assisted dump and let firmware handle everything else.
695 */
696 crash_fadump(NULL, ptr);
697 ppc_md.panic(ptr); /* May not return */
698 return NOTIFY_DONE;
699}
700
701static struct notifier_block ppc_panic_block = {
702 .notifier_call = ppc_panic_event,
703 .priority = INT_MIN /* may not return; must be done last */
704};
705
706void __init setup_panic(void)
707{
708 if (!ppc_md.panic)
709 return;
710 atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block);
711}
712
713#ifdef CONFIG_CHECK_CACHE_COHERENCY
714/*
715 * For platforms that have configurable cache-coherency. This function
716 * checks that the cache coherency setting of the kernel matches the setting
717 * left by the firmware, as indicated in the device tree. Since a mismatch
718 * will eventually result in DMA failures, we print * and error and call
719 * BUG() in that case.
720 */
721
722#ifdef CONFIG_NOT_COHERENT_CACHE
723#define KERNEL_COHERENCY 0
724#else
725#define KERNEL_COHERENCY 1
726#endif
727
728static int __init check_cache_coherency(void)
729{
730 struct device_node *np;
731 const void *prop;
732 int devtree_coherency;
733
734 np = of_find_node_by_path("/");
735 prop = of_get_property(np, "coherency-off", NULL);
736 of_node_put(np);
737
738 devtree_coherency = prop ? 0 : 1;
739
740 if (devtree_coherency != KERNEL_COHERENCY) {
741 printk(KERN_ERR
742 "kernel coherency:%s != device tree_coherency:%s\n",
743 KERNEL_COHERENCY ? "on" : "off",
744 devtree_coherency ? "on" : "off");
745 BUG();
746 }
747
748 return 0;
749}
750
751late_initcall(check_cache_coherency);
752#endif /* CONFIG_CHECK_CACHE_COHERENCY */
753
754#ifdef CONFIG_DEBUG_FS
755struct dentry *powerpc_debugfs_root;
756EXPORT_SYMBOL(powerpc_debugfs_root);
757
758static int powerpc_debugfs_init(void)
759{
760 powerpc_debugfs_root = debugfs_create_dir("powerpc", NULL);
761
762 return powerpc_debugfs_root == NULL;
763}
764arch_initcall(powerpc_debugfs_init);
765#endif
766
767void ppc_printk_progress(char *s, unsigned short hex)
768{
769 pr_info("%s\n", s);
770}
771
772void arch_setup_pdev_archdata(struct platform_device *pdev)
773{
774 pdev->archdata.dma_mask = DMA_BIT_MASK(32);
775 pdev->dev.dma_mask = &pdev->archdata.dma_mask;
776 set_dma_ops(&pdev->dev, &dma_direct_ops);
777}
778
779static __init void print_system_info(void)
780{
781 pr_info("-----------------------------------------------------\n");
782#ifdef CONFIG_PPC_STD_MMU_64
783 pr_info("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
784#endif
785#ifdef CONFIG_PPC_STD_MMU_32
786 pr_info("Hash_size = 0x%lx\n", Hash_size);
787#endif
788 pr_info("phys_mem_size = 0x%llx\n",
789 (unsigned long long)memblock_phys_mem_size());
790
791 pr_info("dcache_bsize = 0x%x\n", dcache_bsize);
792 pr_info("icache_bsize = 0x%x\n", icache_bsize);
793 if (ucache_bsize != 0)
794 pr_info("ucache_bsize = 0x%x\n", ucache_bsize);
795
796 pr_info("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features);
797 pr_info(" possible = 0x%016lx\n",
798 (unsigned long)CPU_FTRS_POSSIBLE);
799 pr_info(" always = 0x%016lx\n",
800 (unsigned long)CPU_FTRS_ALWAYS);
801 pr_info("cpu_user_features = 0x%08x 0x%08x\n",
802 cur_cpu_spec->cpu_user_features,
803 cur_cpu_spec->cpu_user_features2);
804 pr_info("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features);
805#ifdef CONFIG_PPC64
806 pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features);
807#endif
808
809#ifdef CONFIG_PPC_STD_MMU_64
810 if (htab_address)
811 pr_info("htab_address = 0x%p\n", htab_address);
812 if (htab_hash_mask)
813 pr_info("htab_hash_mask = 0x%lx\n", htab_hash_mask);
814#endif
815#ifdef CONFIG_PPC_STD_MMU_32
816 if (Hash)
817 pr_info("Hash = 0x%p\n", Hash);
818 if (Hash_mask)
819 pr_info("Hash_mask = 0x%lx\n", Hash_mask);
820#endif
821
822 if (PHYSICAL_START > 0)
823 pr_info("physical_start = 0x%llx\n",
824 (unsigned long long)PHYSICAL_START);
825 pr_info("-----------------------------------------------------\n");
826}
827
828/*
829 * Called into from start_kernel this initializes memblock, which is used
830 * to manage page allocation until mem_init is called.
831 */
832void __init setup_arch(char **cmdline_p)
833{
834 *cmdline_p = boot_command_line;
835
836 /* Set a half-reasonable default so udelay does something sensible */
837 loops_per_jiffy = 500000000 / HZ;
838
839 /* Unflatten the device-tree passed by prom_init or kexec */
840 unflatten_device_tree();
841
842 /*
843 * Initialize cache line/block info from device-tree (on ppc64) or
844 * just cputable (on ppc32).
845 */
846 initialize_cache_info();
847
848 /* Initialize RTAS if available. */
849 rtas_initialize();
850
851 /* Check if we have an initrd provided via the device-tree. */
852 check_for_initrd();
853
854 /* Probe the machine type, establish ppc_md. */
855 probe_machine();
856
857 /* Setup panic notifier if requested by the platform. */
858 setup_panic();
859
860 /*
861 * Configure ppc_md.power_save (ppc32 only, 64-bit machines do
862 * it from their respective probe() function.
863 */
864 setup_power_save();
865
866 /* Discover standard serial ports. */
867 find_legacy_serial_ports();
868
869 /* Register early console with the printk subsystem. */
870 register_early_udbg_console();
871
872 /* Setup the various CPU maps based on the device-tree. */
873 smp_setup_cpu_maps();
874
875 /* Initialize xmon. */
876 xmon_setup();
877
878 /* Check the SMT related command line arguments (ppc64). */
879 check_smt_enabled();
880
881 /* On BookE, setup per-core TLB data structures. */
882 setup_tlb_core_data();
883
884 /*
885 * Release secondary cpus out of their spinloops at 0x60 now that
886 * we can map physical -> logical CPU ids.
887 *
888 * Freescale Book3e parts spin in a loop provided by firmware,
889 * so smp_release_cpus() does nothing for them.
890 */
891#ifdef CONFIG_SMP
892 smp_release_cpus();
893#endif
894
895 /* Print various info about the machine that has been gathered so far. */
896 print_system_info();
897
898 /* Reserve large chunks of memory for use by CMA for KVM. */
899 kvm_cma_reserve();
900
901 /*
902 * Reserve any gigantic pages requested on the command line.
903 * memblock needs to have been initialized by the time this is
904 * called since this will reserve memory.
905 */
906 reserve_hugetlb_gpages();
907
908 klp_init_thread_info(&init_thread_info);
909
910 init_mm.start_code = (unsigned long)_stext;
911 init_mm.end_code = (unsigned long) _etext;
912 init_mm.end_data = (unsigned long) _edata;
913 init_mm.brk = klimit;
914#ifdef CONFIG_PPC_64K_PAGES
915 init_mm.context.pte_frag = NULL;
916#endif
917#ifdef CONFIG_SPAPR_TCE_IOMMU
918 mm_iommu_init(&init_mm);
919#endif
920 irqstack_early_init();
921 exc_lvl_early_init();
922 emergency_stack_init();
923
924 initmem_init();
925
926#ifdef CONFIG_DUMMY_CONSOLE
927 conswitchp = &dummy_con;
928#endif
929 if (ppc_md.setup_arch)
930 ppc_md.setup_arch();
931
932 paging_init();
933
934 /* Initialize the MMU context management stuff. */
935 mmu_context_init();
936
937#ifdef CONFIG_PPC64
938 /* Interrupt code needs to be 64K-aligned. */
939 if ((unsigned long)_stext & 0xffff)
940 panic("Kernelbase not 64K-aligned (0x%lx)!\n",
941 (unsigned long)_stext);
942#endif
943}