Loading...
1/*
2 * Copyright (c) 2004-2011 Atheros Communications Inc.
3 * Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
4 *
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
8 *
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16 */
17
18#include <linux/module.h>
19#include <linux/mmc/card.h>
20#include <linux/mmc/mmc.h>
21#include <linux/mmc/host.h>
22#include <linux/mmc/sdio_func.h>
23#include <linux/mmc/sdio_ids.h>
24#include <linux/mmc/sdio.h>
25#include <linux/mmc/sd.h>
26#include "hif.h"
27#include "hif-ops.h"
28#include "target.h"
29#include "debug.h"
30#include "cfg80211.h"
31#include "trace.h"
32
33struct ath6kl_sdio {
34 struct sdio_func *func;
35
36 /* protects access to bus_req_freeq */
37 spinlock_t lock;
38
39 /* free list */
40 struct list_head bus_req_freeq;
41
42 /* available bus requests */
43 struct bus_request bus_req[BUS_REQUEST_MAX_NUM];
44
45 struct ath6kl *ar;
46
47 u8 *dma_buffer;
48
49 /* protects access to dma_buffer */
50 struct mutex dma_buffer_mutex;
51
52 /* scatter request list head */
53 struct list_head scat_req;
54
55 atomic_t irq_handling;
56 wait_queue_head_t irq_wq;
57
58 /* protects access to scat_req */
59 spinlock_t scat_lock;
60
61 bool scatter_enabled;
62
63 bool is_disabled;
64 const struct sdio_device_id *id;
65 struct work_struct wr_async_work;
66 struct list_head wr_asyncq;
67
68 /* protects access to wr_asyncq */
69 spinlock_t wr_async_lock;
70};
71
72#define CMD53_ARG_READ 0
73#define CMD53_ARG_WRITE 1
74#define CMD53_ARG_BLOCK_BASIS 1
75#define CMD53_ARG_FIXED_ADDRESS 0
76#define CMD53_ARG_INCR_ADDRESS 1
77
78static int ath6kl_sdio_config(struct ath6kl *ar);
79
80static inline struct ath6kl_sdio *ath6kl_sdio_priv(struct ath6kl *ar)
81{
82 return ar->hif_priv;
83}
84
85/*
86 * Macro to check if DMA buffer is WORD-aligned and DMA-able.
87 * Most host controllers assume the buffer is DMA'able and will
88 * bug-check otherwise (i.e. buffers on the stack). virt_addr_valid
89 * check fails on stack memory.
90 */
91static inline bool buf_needs_bounce(u8 *buf)
92{
93 return ((unsigned long) buf & 0x3) || !virt_addr_valid(buf);
94}
95
96static void ath6kl_sdio_set_mbox_info(struct ath6kl *ar)
97{
98 struct ath6kl_mbox_info *mbox_info = &ar->mbox_info;
99
100 /* EP1 has an extended range */
101 mbox_info->htc_addr = HIF_MBOX_BASE_ADDR;
102 mbox_info->htc_ext_addr = HIF_MBOX0_EXT_BASE_ADDR;
103 mbox_info->htc_ext_sz = HIF_MBOX0_EXT_WIDTH;
104 mbox_info->block_size = HIF_MBOX_BLOCK_SIZE;
105 mbox_info->gmbox_addr = HIF_GMBOX_BASE_ADDR;
106 mbox_info->gmbox_sz = HIF_GMBOX_WIDTH;
107}
108
109static inline void ath6kl_sdio_set_cmd53_arg(u32 *arg, u8 rw, u8 func,
110 u8 mode, u8 opcode, u32 addr,
111 u16 blksz)
112{
113 *arg = (((rw & 1) << 31) |
114 ((func & 0x7) << 28) |
115 ((mode & 1) << 27) |
116 ((opcode & 1) << 26) |
117 ((addr & 0x1FFFF) << 9) |
118 (blksz & 0x1FF));
119}
120
121static inline void ath6kl_sdio_set_cmd52_arg(u32 *arg, u8 write, u8 raw,
122 unsigned int address,
123 unsigned char val)
124{
125 const u8 func = 0;
126
127 *arg = ((write & 1) << 31) |
128 ((func & 0x7) << 28) |
129 ((raw & 1) << 27) |
130 (1 << 26) |
131 ((address & 0x1FFFF) << 9) |
132 (1 << 8) |
133 (val & 0xFF);
134}
135
136static int ath6kl_sdio_func0_cmd52_wr_byte(struct mmc_card *card,
137 unsigned int address,
138 unsigned char byte)
139{
140 struct mmc_command io_cmd;
141
142 memset(&io_cmd, 0, sizeof(io_cmd));
143 ath6kl_sdio_set_cmd52_arg(&io_cmd.arg, 1, 0, address, byte);
144 io_cmd.opcode = SD_IO_RW_DIRECT;
145 io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
146
147 return mmc_wait_for_cmd(card->host, &io_cmd, 0);
148}
149
150static int ath6kl_sdio_io(struct sdio_func *func, u32 request, u32 addr,
151 u8 *buf, u32 len)
152{
153 int ret = 0;
154
155 sdio_claim_host(func);
156
157 if (request & HIF_WRITE) {
158 /* FIXME: looks like ugly workaround for something */
159 if (addr >= HIF_MBOX_BASE_ADDR &&
160 addr <= HIF_MBOX_END_ADDR)
161 addr += (HIF_MBOX_WIDTH - len);
162
163 /* FIXME: this also looks like ugly workaround */
164 if (addr == HIF_MBOX0_EXT_BASE_ADDR)
165 addr += HIF_MBOX0_EXT_WIDTH - len;
166
167 if (request & HIF_FIXED_ADDRESS)
168 ret = sdio_writesb(func, addr, buf, len);
169 else
170 ret = sdio_memcpy_toio(func, addr, buf, len);
171 } else {
172 if (request & HIF_FIXED_ADDRESS)
173 ret = sdio_readsb(func, buf, addr, len);
174 else
175 ret = sdio_memcpy_fromio(func, buf, addr, len);
176 }
177
178 sdio_release_host(func);
179
180 ath6kl_dbg(ATH6KL_DBG_SDIO, "%s addr 0x%x%s buf 0x%p len %d\n",
181 request & HIF_WRITE ? "wr" : "rd", addr,
182 request & HIF_FIXED_ADDRESS ? " (fixed)" : "", buf, len);
183 ath6kl_dbg_dump(ATH6KL_DBG_SDIO_DUMP, NULL, "sdio ", buf, len);
184
185 trace_ath6kl_sdio(addr, request, buf, len);
186
187 return ret;
188}
189
190static struct bus_request *ath6kl_sdio_alloc_busreq(struct ath6kl_sdio *ar_sdio)
191{
192 struct bus_request *bus_req;
193
194 spin_lock_bh(&ar_sdio->lock);
195
196 if (list_empty(&ar_sdio->bus_req_freeq)) {
197 spin_unlock_bh(&ar_sdio->lock);
198 return NULL;
199 }
200
201 bus_req = list_first_entry(&ar_sdio->bus_req_freeq,
202 struct bus_request, list);
203 list_del(&bus_req->list);
204
205 spin_unlock_bh(&ar_sdio->lock);
206 ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n",
207 __func__, bus_req);
208
209 return bus_req;
210}
211
212static void ath6kl_sdio_free_bus_req(struct ath6kl_sdio *ar_sdio,
213 struct bus_request *bus_req)
214{
215 ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n",
216 __func__, bus_req);
217
218 spin_lock_bh(&ar_sdio->lock);
219 list_add_tail(&bus_req->list, &ar_sdio->bus_req_freeq);
220 spin_unlock_bh(&ar_sdio->lock);
221}
222
223static void ath6kl_sdio_setup_scat_data(struct hif_scatter_req *scat_req,
224 struct mmc_data *data)
225{
226 struct scatterlist *sg;
227 int i;
228
229 data->blksz = HIF_MBOX_BLOCK_SIZE;
230 data->blocks = scat_req->len / HIF_MBOX_BLOCK_SIZE;
231
232 ath6kl_dbg(ATH6KL_DBG_SCATTER,
233 "hif-scatter: (%s) addr: 0x%X, (block len: %d, block count: %d) , (tot:%d,sg:%d)\n",
234 (scat_req->req & HIF_WRITE) ? "WR" : "RD", scat_req->addr,
235 data->blksz, data->blocks, scat_req->len,
236 scat_req->scat_entries);
237
238 data->flags = (scat_req->req & HIF_WRITE) ? MMC_DATA_WRITE :
239 MMC_DATA_READ;
240
241 /* fill SG entries */
242 sg = scat_req->sgentries;
243 sg_init_table(sg, scat_req->scat_entries);
244
245 /* assemble SG list */
246 for (i = 0; i < scat_req->scat_entries; i++, sg++) {
247 ath6kl_dbg(ATH6KL_DBG_SCATTER, "%d: addr:0x%p, len:%d\n",
248 i, scat_req->scat_list[i].buf,
249 scat_req->scat_list[i].len);
250
251 sg_set_buf(sg, scat_req->scat_list[i].buf,
252 scat_req->scat_list[i].len);
253 }
254
255 /* set scatter-gather table for request */
256 data->sg = scat_req->sgentries;
257 data->sg_len = scat_req->scat_entries;
258}
259
260static int ath6kl_sdio_scat_rw(struct ath6kl_sdio *ar_sdio,
261 struct bus_request *req)
262{
263 struct mmc_request mmc_req;
264 struct mmc_command cmd;
265 struct mmc_data data;
266 struct hif_scatter_req *scat_req;
267 u8 opcode, rw;
268 int status, len;
269
270 scat_req = req->scat_req;
271
272 if (scat_req->virt_scat) {
273 len = scat_req->len;
274 if (scat_req->req & HIF_BLOCK_BASIS)
275 len = round_down(len, HIF_MBOX_BLOCK_SIZE);
276
277 status = ath6kl_sdio_io(ar_sdio->func, scat_req->req,
278 scat_req->addr, scat_req->virt_dma_buf,
279 len);
280 goto scat_complete;
281 }
282
283 memset(&mmc_req, 0, sizeof(struct mmc_request));
284 memset(&cmd, 0, sizeof(struct mmc_command));
285 memset(&data, 0, sizeof(struct mmc_data));
286
287 ath6kl_sdio_setup_scat_data(scat_req, &data);
288
289 opcode = (scat_req->req & HIF_FIXED_ADDRESS) ?
290 CMD53_ARG_FIXED_ADDRESS : CMD53_ARG_INCR_ADDRESS;
291
292 rw = (scat_req->req & HIF_WRITE) ? CMD53_ARG_WRITE : CMD53_ARG_READ;
293
294 /* Fixup the address so that the last byte will fall on MBOX EOM */
295 if (scat_req->req & HIF_WRITE) {
296 if (scat_req->addr == HIF_MBOX_BASE_ADDR)
297 scat_req->addr += HIF_MBOX_WIDTH - scat_req->len;
298 else
299 /* Uses extended address range */
300 scat_req->addr += HIF_MBOX0_EXT_WIDTH - scat_req->len;
301 }
302
303 /* set command argument */
304 ath6kl_sdio_set_cmd53_arg(&cmd.arg, rw, ar_sdio->func->num,
305 CMD53_ARG_BLOCK_BASIS, opcode, scat_req->addr,
306 data.blocks);
307
308 cmd.opcode = SD_IO_RW_EXTENDED;
309 cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
310
311 mmc_req.cmd = &cmd;
312 mmc_req.data = &data;
313
314 sdio_claim_host(ar_sdio->func);
315
316 mmc_set_data_timeout(&data, ar_sdio->func->card);
317
318 trace_ath6kl_sdio_scat(scat_req->addr,
319 scat_req->req,
320 scat_req->len,
321 scat_req->scat_entries,
322 scat_req->scat_list);
323
324 /* synchronous call to process request */
325 mmc_wait_for_req(ar_sdio->func->card->host, &mmc_req);
326
327 sdio_release_host(ar_sdio->func);
328
329 status = cmd.error ? cmd.error : data.error;
330
331scat_complete:
332 scat_req->status = status;
333
334 if (scat_req->status)
335 ath6kl_err("Scatter write request failed:%d\n",
336 scat_req->status);
337
338 if (scat_req->req & HIF_ASYNCHRONOUS)
339 scat_req->complete(ar_sdio->ar->htc_target, scat_req);
340
341 return status;
342}
343
344static int ath6kl_sdio_alloc_prep_scat_req(struct ath6kl_sdio *ar_sdio,
345 int n_scat_entry, int n_scat_req,
346 bool virt_scat)
347{
348 struct hif_scatter_req *s_req;
349 struct bus_request *bus_req;
350 int i, scat_req_sz, scat_list_sz, size;
351 u8 *virt_buf;
352
353 scat_list_sz = n_scat_entry * sizeof(struct hif_scatter_item);
354 scat_req_sz = sizeof(*s_req) + scat_list_sz;
355
356 if (!virt_scat)
357 size = sizeof(struct scatterlist) * n_scat_entry;
358 else
359 size = 2 * L1_CACHE_BYTES +
360 ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER;
361
362 for (i = 0; i < n_scat_req; i++) {
363 /* allocate the scatter request */
364 s_req = kzalloc(scat_req_sz, GFP_KERNEL);
365 if (!s_req)
366 return -ENOMEM;
367
368 if (virt_scat) {
369 virt_buf = kzalloc(size, GFP_KERNEL);
370 if (!virt_buf) {
371 kfree(s_req);
372 return -ENOMEM;
373 }
374
375 s_req->virt_dma_buf =
376 (u8 *)L1_CACHE_ALIGN((unsigned long)virt_buf);
377 } else {
378 /* allocate sglist */
379 s_req->sgentries = kzalloc(size, GFP_KERNEL);
380
381 if (!s_req->sgentries) {
382 kfree(s_req);
383 return -ENOMEM;
384 }
385 }
386
387 /* allocate a bus request for this scatter request */
388 bus_req = ath6kl_sdio_alloc_busreq(ar_sdio);
389 if (!bus_req) {
390 kfree(s_req->sgentries);
391 kfree(s_req->virt_dma_buf);
392 kfree(s_req);
393 return -ENOMEM;
394 }
395
396 /* assign the scatter request to this bus request */
397 bus_req->scat_req = s_req;
398 s_req->busrequest = bus_req;
399
400 s_req->virt_scat = virt_scat;
401
402 /* add it to the scatter pool */
403 hif_scatter_req_add(ar_sdio->ar, s_req);
404 }
405
406 return 0;
407}
408
409static int ath6kl_sdio_read_write_sync(struct ath6kl *ar, u32 addr, u8 *buf,
410 u32 len, u32 request)
411{
412 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
413 u8 *tbuf = NULL;
414 int ret;
415 bool bounced = false;
416
417 if (request & HIF_BLOCK_BASIS)
418 len = round_down(len, HIF_MBOX_BLOCK_SIZE);
419
420 if (buf_needs_bounce(buf)) {
421 if (!ar_sdio->dma_buffer)
422 return -ENOMEM;
423 mutex_lock(&ar_sdio->dma_buffer_mutex);
424 tbuf = ar_sdio->dma_buffer;
425
426 if (request & HIF_WRITE)
427 memcpy(tbuf, buf, len);
428
429 bounced = true;
430 } else {
431 tbuf = buf;
432 }
433
434 ret = ath6kl_sdio_io(ar_sdio->func, request, addr, tbuf, len);
435 if ((request & HIF_READ) && bounced)
436 memcpy(buf, tbuf, len);
437
438 if (bounced)
439 mutex_unlock(&ar_sdio->dma_buffer_mutex);
440
441 return ret;
442}
443
444static void __ath6kl_sdio_write_async(struct ath6kl_sdio *ar_sdio,
445 struct bus_request *req)
446{
447 if (req->scat_req) {
448 ath6kl_sdio_scat_rw(ar_sdio, req);
449 } else {
450 void *context;
451 int status;
452
453 status = ath6kl_sdio_read_write_sync(ar_sdio->ar, req->address,
454 req->buffer, req->length,
455 req->request);
456 context = req->packet;
457 ath6kl_sdio_free_bus_req(ar_sdio, req);
458 ath6kl_hif_rw_comp_handler(context, status);
459 }
460}
461
462static void ath6kl_sdio_write_async_work(struct work_struct *work)
463{
464 struct ath6kl_sdio *ar_sdio;
465 struct bus_request *req, *tmp_req;
466
467 ar_sdio = container_of(work, struct ath6kl_sdio, wr_async_work);
468
469 spin_lock_bh(&ar_sdio->wr_async_lock);
470 list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) {
471 list_del(&req->list);
472 spin_unlock_bh(&ar_sdio->wr_async_lock);
473 __ath6kl_sdio_write_async(ar_sdio, req);
474 spin_lock_bh(&ar_sdio->wr_async_lock);
475 }
476 spin_unlock_bh(&ar_sdio->wr_async_lock);
477}
478
479static void ath6kl_sdio_irq_handler(struct sdio_func *func)
480{
481 int status;
482 struct ath6kl_sdio *ar_sdio;
483
484 ath6kl_dbg(ATH6KL_DBG_SDIO, "irq\n");
485
486 ar_sdio = sdio_get_drvdata(func);
487 atomic_set(&ar_sdio->irq_handling, 1);
488 /*
489 * Release the host during interrups so we can pick it back up when
490 * we process commands.
491 */
492 sdio_release_host(ar_sdio->func);
493
494 status = ath6kl_hif_intr_bh_handler(ar_sdio->ar);
495 sdio_claim_host(ar_sdio->func);
496
497 atomic_set(&ar_sdio->irq_handling, 0);
498 wake_up(&ar_sdio->irq_wq);
499
500 WARN_ON(status && status != -ECANCELED);
501}
502
503static int ath6kl_sdio_power_on(struct ath6kl *ar)
504{
505 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
506 struct sdio_func *func = ar_sdio->func;
507 int ret = 0;
508
509 if (!ar_sdio->is_disabled)
510 return 0;
511
512 ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power on\n");
513
514 sdio_claim_host(func);
515
516 ret = sdio_enable_func(func);
517 if (ret) {
518 ath6kl_err("Unable to enable sdio func: %d)\n", ret);
519 sdio_release_host(func);
520 return ret;
521 }
522
523 sdio_release_host(func);
524
525 /*
526 * Wait for hardware to initialise. It should take a lot less than
527 * 10 ms but let's be conservative here.
528 */
529 msleep(10);
530
531 ret = ath6kl_sdio_config(ar);
532 if (ret) {
533 ath6kl_err("Failed to config sdio: %d\n", ret);
534 goto out;
535 }
536
537 ar_sdio->is_disabled = false;
538
539out:
540 return ret;
541}
542
543static int ath6kl_sdio_power_off(struct ath6kl *ar)
544{
545 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
546 int ret;
547
548 if (ar_sdio->is_disabled)
549 return 0;
550
551 ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power off\n");
552
553 /* Disable the card */
554 sdio_claim_host(ar_sdio->func);
555 ret = sdio_disable_func(ar_sdio->func);
556 sdio_release_host(ar_sdio->func);
557
558 if (ret)
559 return ret;
560
561 ar_sdio->is_disabled = true;
562
563 return ret;
564}
565
566static int ath6kl_sdio_write_async(struct ath6kl *ar, u32 address, u8 *buffer,
567 u32 length, u32 request,
568 struct htc_packet *packet)
569{
570 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
571 struct bus_request *bus_req;
572
573 bus_req = ath6kl_sdio_alloc_busreq(ar_sdio);
574
575 if (WARN_ON_ONCE(!bus_req))
576 return -ENOMEM;
577
578 bus_req->address = address;
579 bus_req->buffer = buffer;
580 bus_req->length = length;
581 bus_req->request = request;
582 bus_req->packet = packet;
583
584 spin_lock_bh(&ar_sdio->wr_async_lock);
585 list_add_tail(&bus_req->list, &ar_sdio->wr_asyncq);
586 spin_unlock_bh(&ar_sdio->wr_async_lock);
587 queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work);
588
589 return 0;
590}
591
592static void ath6kl_sdio_irq_enable(struct ath6kl *ar)
593{
594 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
595 int ret;
596
597 sdio_claim_host(ar_sdio->func);
598
599 /* Register the isr */
600 ret = sdio_claim_irq(ar_sdio->func, ath6kl_sdio_irq_handler);
601 if (ret)
602 ath6kl_err("Failed to claim sdio irq: %d\n", ret);
603
604 sdio_release_host(ar_sdio->func);
605}
606
607static bool ath6kl_sdio_is_on_irq(struct ath6kl *ar)
608{
609 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
610
611 return !atomic_read(&ar_sdio->irq_handling);
612}
613
614static void ath6kl_sdio_irq_disable(struct ath6kl *ar)
615{
616 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
617 int ret;
618
619 sdio_claim_host(ar_sdio->func);
620
621 if (atomic_read(&ar_sdio->irq_handling)) {
622 sdio_release_host(ar_sdio->func);
623
624 ret = wait_event_interruptible(ar_sdio->irq_wq,
625 ath6kl_sdio_is_on_irq(ar));
626 if (ret)
627 return;
628
629 sdio_claim_host(ar_sdio->func);
630 }
631
632 ret = sdio_release_irq(ar_sdio->func);
633 if (ret)
634 ath6kl_err("Failed to release sdio irq: %d\n", ret);
635
636 sdio_release_host(ar_sdio->func);
637}
638
639static struct hif_scatter_req *ath6kl_sdio_scatter_req_get(struct ath6kl *ar)
640{
641 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
642 struct hif_scatter_req *node = NULL;
643
644 spin_lock_bh(&ar_sdio->scat_lock);
645
646 if (!list_empty(&ar_sdio->scat_req)) {
647 node = list_first_entry(&ar_sdio->scat_req,
648 struct hif_scatter_req, list);
649 list_del(&node->list);
650
651 node->scat_q_depth = get_queue_depth(&ar_sdio->scat_req);
652 }
653
654 spin_unlock_bh(&ar_sdio->scat_lock);
655
656 return node;
657}
658
659static void ath6kl_sdio_scatter_req_add(struct ath6kl *ar,
660 struct hif_scatter_req *s_req)
661{
662 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
663
664 spin_lock_bh(&ar_sdio->scat_lock);
665
666 list_add_tail(&s_req->list, &ar_sdio->scat_req);
667
668 spin_unlock_bh(&ar_sdio->scat_lock);
669}
670
671/* scatter gather read write request */
672static int ath6kl_sdio_async_rw_scatter(struct ath6kl *ar,
673 struct hif_scatter_req *scat_req)
674{
675 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
676 u32 request = scat_req->req;
677 int status = 0;
678
679 if (!scat_req->len)
680 return -EINVAL;
681
682 ath6kl_dbg(ATH6KL_DBG_SCATTER,
683 "hif-scatter: total len: %d scatter entries: %d\n",
684 scat_req->len, scat_req->scat_entries);
685
686 if (request & HIF_SYNCHRONOUS) {
687 status = ath6kl_sdio_scat_rw(ar_sdio, scat_req->busrequest);
688 } else {
689 spin_lock_bh(&ar_sdio->wr_async_lock);
690 list_add_tail(&scat_req->busrequest->list, &ar_sdio->wr_asyncq);
691 spin_unlock_bh(&ar_sdio->wr_async_lock);
692 queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work);
693 }
694
695 return status;
696}
697
698/* clean up scatter support */
699static void ath6kl_sdio_cleanup_scatter(struct ath6kl *ar)
700{
701 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
702 struct hif_scatter_req *s_req, *tmp_req;
703
704 /* empty the free list */
705 spin_lock_bh(&ar_sdio->scat_lock);
706 list_for_each_entry_safe(s_req, tmp_req, &ar_sdio->scat_req, list) {
707 list_del(&s_req->list);
708 spin_unlock_bh(&ar_sdio->scat_lock);
709
710 /*
711 * FIXME: should we also call completion handler with
712 * ath6kl_hif_rw_comp_handler() with status -ECANCELED so
713 * that the packet is properly freed?
714 */
715 if (s_req->busrequest) {
716 s_req->busrequest->scat_req = NULL;
717 ath6kl_sdio_free_bus_req(ar_sdio, s_req->busrequest);
718 }
719 kfree(s_req->virt_dma_buf);
720 kfree(s_req->sgentries);
721 kfree(s_req);
722
723 spin_lock_bh(&ar_sdio->scat_lock);
724 }
725 spin_unlock_bh(&ar_sdio->scat_lock);
726
727 ar_sdio->scatter_enabled = false;
728}
729
730/* setup of HIF scatter resources */
731static int ath6kl_sdio_enable_scatter(struct ath6kl *ar)
732{
733 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
734 struct htc_target *target = ar->htc_target;
735 int ret = 0;
736 bool virt_scat = false;
737
738 if (ar_sdio->scatter_enabled)
739 return 0;
740
741 ar_sdio->scatter_enabled = true;
742
743 /* check if host supports scatter and it meets our requirements */
744 if (ar_sdio->func->card->host->max_segs < MAX_SCATTER_ENTRIES_PER_REQ) {
745 ath6kl_err("host only supports scatter of :%d entries, need: %d\n",
746 ar_sdio->func->card->host->max_segs,
747 MAX_SCATTER_ENTRIES_PER_REQ);
748 virt_scat = true;
749 }
750
751 if (!virt_scat) {
752 ret = ath6kl_sdio_alloc_prep_scat_req(ar_sdio,
753 MAX_SCATTER_ENTRIES_PER_REQ,
754 MAX_SCATTER_REQUESTS, virt_scat);
755
756 if (!ret) {
757 ath6kl_dbg(ATH6KL_DBG_BOOT,
758 "hif-scatter enabled requests %d entries %d\n",
759 MAX_SCATTER_REQUESTS,
760 MAX_SCATTER_ENTRIES_PER_REQ);
761
762 target->max_scat_entries = MAX_SCATTER_ENTRIES_PER_REQ;
763 target->max_xfer_szper_scatreq =
764 MAX_SCATTER_REQ_TRANSFER_SIZE;
765 } else {
766 ath6kl_sdio_cleanup_scatter(ar);
767 ath6kl_warn("hif scatter resource setup failed, trying virtual scatter method\n");
768 }
769 }
770
771 if (virt_scat || ret) {
772 ret = ath6kl_sdio_alloc_prep_scat_req(ar_sdio,
773 ATH6KL_SCATTER_ENTRIES_PER_REQ,
774 ATH6KL_SCATTER_REQS, virt_scat);
775
776 if (ret) {
777 ath6kl_err("failed to alloc virtual scatter resources !\n");
778 ath6kl_sdio_cleanup_scatter(ar);
779 return ret;
780 }
781
782 ath6kl_dbg(ATH6KL_DBG_BOOT,
783 "virtual scatter enabled requests %d entries %d\n",
784 ATH6KL_SCATTER_REQS, ATH6KL_SCATTER_ENTRIES_PER_REQ);
785
786 target->max_scat_entries = ATH6KL_SCATTER_ENTRIES_PER_REQ;
787 target->max_xfer_szper_scatreq =
788 ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER;
789 }
790
791 return 0;
792}
793
794static int ath6kl_sdio_config(struct ath6kl *ar)
795{
796 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
797 struct sdio_func *func = ar_sdio->func;
798 int ret;
799
800 sdio_claim_host(func);
801
802 if (ar_sdio->id->device >= SDIO_DEVICE_ID_ATHEROS_AR6003_00) {
803 /* enable 4-bit ASYNC interrupt on AR6003 or later */
804 ret = ath6kl_sdio_func0_cmd52_wr_byte(func->card,
805 CCCR_SDIO_IRQ_MODE_REG,
806 SDIO_IRQ_MODE_ASYNC_4BIT_IRQ);
807 if (ret) {
808 ath6kl_err("Failed to enable 4-bit async irq mode %d\n",
809 ret);
810 goto out;
811 }
812
813 ath6kl_dbg(ATH6KL_DBG_BOOT, "4-bit async irq mode enabled\n");
814 }
815
816 /* give us some time to enable, in ms */
817 func->enable_timeout = 100;
818
819 ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE);
820 if (ret) {
821 ath6kl_err("Set sdio block size %d failed: %d)\n",
822 HIF_MBOX_BLOCK_SIZE, ret);
823 goto out;
824 }
825
826out:
827 sdio_release_host(func);
828
829 return ret;
830}
831
832static int ath6kl_set_sdio_pm_caps(struct ath6kl *ar)
833{
834 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
835 struct sdio_func *func = ar_sdio->func;
836 mmc_pm_flag_t flags;
837 int ret;
838
839 flags = sdio_get_host_pm_caps(func);
840
841 ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio suspend pm_caps 0x%x\n", flags);
842
843 if (!(flags & MMC_PM_WAKE_SDIO_IRQ) ||
844 !(flags & MMC_PM_KEEP_POWER))
845 return -EINVAL;
846
847 ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
848 if (ret) {
849 ath6kl_err("set sdio keep pwr flag failed: %d\n", ret);
850 return ret;
851 }
852
853 /* sdio irq wakes up host */
854 ret = sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ);
855 if (ret)
856 ath6kl_err("set sdio wake irq flag failed: %d\n", ret);
857
858 return ret;
859}
860
861static int ath6kl_sdio_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
862{
863 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
864 struct sdio_func *func = ar_sdio->func;
865 mmc_pm_flag_t flags;
866 bool try_deepsleep = false;
867 int ret;
868
869 if (ar->suspend_mode == WLAN_POWER_STATE_WOW ||
870 (!ar->suspend_mode && wow)) {
871 ret = ath6kl_set_sdio_pm_caps(ar);
872 if (ret)
873 goto cut_pwr;
874
875 ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_WOW, wow);
876 if (ret && ret != -ENOTCONN)
877 ath6kl_err("wow suspend failed: %d\n", ret);
878
879 if (ret &&
880 (!ar->wow_suspend_mode ||
881 ar->wow_suspend_mode == WLAN_POWER_STATE_DEEP_SLEEP))
882 try_deepsleep = true;
883 else if (ret &&
884 ar->wow_suspend_mode == WLAN_POWER_STATE_CUT_PWR)
885 goto cut_pwr;
886 if (!ret)
887 return 0;
888 }
889
890 if (ar->suspend_mode == WLAN_POWER_STATE_DEEP_SLEEP ||
891 !ar->suspend_mode || try_deepsleep) {
892 flags = sdio_get_host_pm_caps(func);
893 if (!(flags & MMC_PM_KEEP_POWER))
894 goto cut_pwr;
895
896 ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
897 if (ret)
898 goto cut_pwr;
899
900 /*
901 * Workaround to support Deep Sleep with MSM, set the host pm
902 * flag as MMC_PM_WAKE_SDIO_IRQ to allow SDCC deiver to disable
903 * the sdc2_clock and internally allows MSM to enter
904 * TCXO shutdown properly.
905 */
906 if ((flags & MMC_PM_WAKE_SDIO_IRQ)) {
907 ret = sdio_set_host_pm_flags(func,
908 MMC_PM_WAKE_SDIO_IRQ);
909 if (ret)
910 goto cut_pwr;
911 }
912
913 ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_DEEPSLEEP,
914 NULL);
915 if (ret)
916 goto cut_pwr;
917
918 return 0;
919 }
920
921cut_pwr:
922 if (func->card && func->card->host)
923 func->card->host->pm_flags &= ~MMC_PM_KEEP_POWER;
924
925 return ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_CUTPOWER, NULL);
926}
927
928static int ath6kl_sdio_resume(struct ath6kl *ar)
929{
930 switch (ar->state) {
931 case ATH6KL_STATE_OFF:
932 case ATH6KL_STATE_CUTPOWER:
933 ath6kl_dbg(ATH6KL_DBG_SUSPEND,
934 "sdio resume configuring sdio\n");
935
936 /* need to set sdio settings after power is cut from sdio */
937 ath6kl_sdio_config(ar);
938 break;
939
940 case ATH6KL_STATE_ON:
941 break;
942
943 case ATH6KL_STATE_DEEPSLEEP:
944 break;
945
946 case ATH6KL_STATE_WOW:
947 break;
948
949 case ATH6KL_STATE_SUSPENDING:
950 break;
951
952 case ATH6KL_STATE_RESUMING:
953 break;
954
955 case ATH6KL_STATE_RECOVERY:
956 break;
957 }
958
959 ath6kl_cfg80211_resume(ar);
960
961 return 0;
962}
963
964/* set the window address register (using 4-byte register access ). */
965static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr)
966{
967 int status;
968 u8 addr_val[4];
969 s32 i;
970
971 /*
972 * Write bytes 1,2,3 of the register to set the upper address bytes,
973 * the LSB is written last to initiate the access cycle
974 */
975
976 for (i = 1; i <= 3; i++) {
977 /*
978 * Fill the buffer with the address byte value we want to
979 * hit 4 times.
980 */
981 memset(addr_val, ((u8 *)&addr)[i], 4);
982
983 /*
984 * Hit each byte of the register address with a 4-byte
985 * write operation to the same address, this is a harmless
986 * operation.
987 */
988 status = ath6kl_sdio_read_write_sync(ar, reg_addr + i, addr_val,
989 4, HIF_WR_SYNC_BYTE_FIX);
990 if (status)
991 break;
992 }
993
994 if (status) {
995 ath6kl_err("%s: failed to write initial bytes of 0x%x to window reg: 0x%X\n",
996 __func__, addr, reg_addr);
997 return status;
998 }
999
1000 /*
1001 * Write the address register again, this time write the whole
1002 * 4-byte value. The effect here is that the LSB write causes the
1003 * cycle to start, the extra 3 byte write to bytes 1,2,3 has no
1004 * effect since we are writing the same values again
1005 */
1006 status = ath6kl_sdio_read_write_sync(ar, reg_addr, (u8 *)(&addr),
1007 4, HIF_WR_SYNC_BYTE_INC);
1008
1009 if (status) {
1010 ath6kl_err("%s: failed to write 0x%x to window reg: 0x%X\n",
1011 __func__, addr, reg_addr);
1012 return status;
1013 }
1014
1015 return 0;
1016}
1017
1018static int ath6kl_sdio_diag_read32(struct ath6kl *ar, u32 address, u32 *data)
1019{
1020 int status;
1021
1022 /* set window register to start read cycle */
1023 status = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS,
1024 address);
1025
1026 if (status)
1027 return status;
1028
1029 /* read the data */
1030 status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
1031 (u8 *)data, sizeof(u32), HIF_RD_SYNC_BYTE_INC);
1032 if (status) {
1033 ath6kl_err("%s: failed to read from window data addr\n",
1034 __func__);
1035 return status;
1036 }
1037
1038 return status;
1039}
1040
1041static int ath6kl_sdio_diag_write32(struct ath6kl *ar, u32 address,
1042 __le32 data)
1043{
1044 int status;
1045 u32 val = (__force u32) data;
1046
1047 /* set write data */
1048 status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
1049 (u8 *) &val, sizeof(u32), HIF_WR_SYNC_BYTE_INC);
1050 if (status) {
1051 ath6kl_err("%s: failed to write 0x%x to window data addr\n",
1052 __func__, data);
1053 return status;
1054 }
1055
1056 /* set window register, which starts the write cycle */
1057 return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS,
1058 address);
1059}
1060
1061static int ath6kl_sdio_bmi_credits(struct ath6kl *ar)
1062{
1063 u32 addr;
1064 unsigned long timeout;
1065 int ret;
1066
1067 ar->bmi.cmd_credits = 0;
1068
1069 /* Read the counter register to get the command credits */
1070 addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
1071
1072 timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
1073 while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {
1074 /*
1075 * Hit the credit counter with a 4-byte access, the first byte
1076 * read will hit the counter and cause a decrement, while the
1077 * remaining 3 bytes has no effect. The rationale behind this
1078 * is to make all HIF accesses 4-byte aligned.
1079 */
1080 ret = ath6kl_sdio_read_write_sync(ar, addr,
1081 (u8 *)&ar->bmi.cmd_credits, 4,
1082 HIF_RD_SYNC_BYTE_INC);
1083 if (ret) {
1084 ath6kl_err("Unable to decrement the command credit count register: %d\n",
1085 ret);
1086 return ret;
1087 }
1088
1089 /* The counter is only 8 bits.
1090 * Ignore anything in the upper 3 bytes
1091 */
1092 ar->bmi.cmd_credits &= 0xFF;
1093 }
1094
1095 if (!ar->bmi.cmd_credits) {
1096 ath6kl_err("bmi communication timeout\n");
1097 return -ETIMEDOUT;
1098 }
1099
1100 return 0;
1101}
1102
1103static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar)
1104{
1105 unsigned long timeout;
1106 u32 rx_word = 0;
1107 int ret = 0;
1108
1109 timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
1110 while ((time_before(jiffies, timeout)) && !rx_word) {
1111 ret = ath6kl_sdio_read_write_sync(ar,
1112 RX_LOOKAHEAD_VALID_ADDRESS,
1113 (u8 *)&rx_word, sizeof(rx_word),
1114 HIF_RD_SYNC_BYTE_INC);
1115 if (ret) {
1116 ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");
1117 return ret;
1118 }
1119
1120 /* all we really want is one bit */
1121 rx_word &= (1 << ENDPOINT1);
1122 }
1123
1124 if (!rx_word) {
1125 ath6kl_err("bmi_recv_buf FIFO empty\n");
1126 return -EINVAL;
1127 }
1128
1129 return ret;
1130}
1131
1132static int ath6kl_sdio_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
1133{
1134 int ret;
1135 u32 addr;
1136
1137 ret = ath6kl_sdio_bmi_credits(ar);
1138 if (ret)
1139 return ret;
1140
1141 addr = ar->mbox_info.htc_addr;
1142
1143 ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
1144 HIF_WR_SYNC_BYTE_INC);
1145 if (ret) {
1146 ath6kl_err("unable to send the bmi data to the device\n");
1147 return ret;
1148 }
1149
1150 return 0;
1151}
1152
1153static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
1154{
1155 int ret;
1156 u32 addr;
1157
1158 /*
1159 * During normal bootup, small reads may be required.
1160 * Rather than issue an HIF Read and then wait as the Target
1161 * adds successive bytes to the FIFO, we wait here until
1162 * we know that response data is available.
1163 *
1164 * This allows us to cleanly timeout on an unexpected
1165 * Target failure rather than risk problems at the HIF level.
1166 * In particular, this avoids SDIO timeouts and possibly garbage
1167 * data on some host controllers. And on an interconnect
1168 * such as Compact Flash (as well as some SDIO masters) which
1169 * does not provide any indication on data timeout, it avoids
1170 * a potential hang or garbage response.
1171 *
1172 * Synchronization is more difficult for reads larger than the
1173 * size of the MBOX FIFO (128B), because the Target is unable
1174 * to push the 129th byte of data until AFTER the Host posts an
1175 * HIF Read and removes some FIFO data. So for large reads the
1176 * Host proceeds to post an HIF Read BEFORE all the data is
1177 * actually available to read. Fortunately, large BMI reads do
1178 * not occur in practice -- they're supported for debug/development.
1179 *
1180 * So Host/Target BMI synchronization is divided into these cases:
1181 * CASE 1: length < 4
1182 * Should not happen
1183 *
1184 * CASE 2: 4 <= length <= 128
1185 * Wait for first 4 bytes to be in FIFO
1186 * If CONSERVATIVE_BMI_READ is enabled, also wait for
1187 * a BMI command credit, which indicates that the ENTIRE
1188 * response is available in the FIFO
1189 *
1190 * CASE 3: length > 128
1191 * Wait for the first 4 bytes to be in FIFO
1192 *
1193 * For most uses, a small timeout should be sufficient and we will
1194 * usually see a response quickly; but there may be some unusual
1195 * (debug) cases of BMI_EXECUTE where we want an larger timeout.
1196 * For now, we use an unbounded busy loop while waiting for
1197 * BMI_EXECUTE.
1198 *
1199 * If BMI_EXECUTE ever needs to support longer-latency execution,
1200 * especially in production, this code needs to be enhanced to sleep
1201 * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently
1202 * a function of Host processor speed.
1203 */
1204 if (len >= 4) { /* NB: Currently, always true */
1205 ret = ath6kl_bmi_get_rx_lkahd(ar);
1206 if (ret)
1207 return ret;
1208 }
1209
1210 addr = ar->mbox_info.htc_addr;
1211 ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
1212 HIF_RD_SYNC_BYTE_INC);
1213 if (ret) {
1214 ath6kl_err("Unable to read the bmi data from the device: %d\n",
1215 ret);
1216 return ret;
1217 }
1218
1219 return 0;
1220}
1221
1222static void ath6kl_sdio_stop(struct ath6kl *ar)
1223{
1224 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
1225 struct bus_request *req, *tmp_req;
1226 void *context;
1227
1228 /* FIXME: make sure that wq is not queued again */
1229
1230 cancel_work_sync(&ar_sdio->wr_async_work);
1231
1232 spin_lock_bh(&ar_sdio->wr_async_lock);
1233
1234 list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) {
1235 list_del(&req->list);
1236
1237 if (req->scat_req) {
1238 /* this is a scatter gather request */
1239 req->scat_req->status = -ECANCELED;
1240 req->scat_req->complete(ar_sdio->ar->htc_target,
1241 req->scat_req);
1242 } else {
1243 context = req->packet;
1244 ath6kl_sdio_free_bus_req(ar_sdio, req);
1245 ath6kl_hif_rw_comp_handler(context, -ECANCELED);
1246 }
1247 }
1248
1249 spin_unlock_bh(&ar_sdio->wr_async_lock);
1250
1251 WARN_ON(get_queue_depth(&ar_sdio->scat_req) != 4);
1252}
1253
1254static const struct ath6kl_hif_ops ath6kl_sdio_ops = {
1255 .read_write_sync = ath6kl_sdio_read_write_sync,
1256 .write_async = ath6kl_sdio_write_async,
1257 .irq_enable = ath6kl_sdio_irq_enable,
1258 .irq_disable = ath6kl_sdio_irq_disable,
1259 .scatter_req_get = ath6kl_sdio_scatter_req_get,
1260 .scatter_req_add = ath6kl_sdio_scatter_req_add,
1261 .enable_scatter = ath6kl_sdio_enable_scatter,
1262 .scat_req_rw = ath6kl_sdio_async_rw_scatter,
1263 .cleanup_scatter = ath6kl_sdio_cleanup_scatter,
1264 .suspend = ath6kl_sdio_suspend,
1265 .resume = ath6kl_sdio_resume,
1266 .diag_read32 = ath6kl_sdio_diag_read32,
1267 .diag_write32 = ath6kl_sdio_diag_write32,
1268 .bmi_read = ath6kl_sdio_bmi_read,
1269 .bmi_write = ath6kl_sdio_bmi_write,
1270 .power_on = ath6kl_sdio_power_on,
1271 .power_off = ath6kl_sdio_power_off,
1272 .stop = ath6kl_sdio_stop,
1273};
1274
1275#ifdef CONFIG_PM_SLEEP
1276
1277/*
1278 * Empty handlers so that mmc subsystem doesn't remove us entirely during
1279 * suspend. We instead follow cfg80211 suspend/resume handlers.
1280 */
1281static int ath6kl_sdio_pm_suspend(struct device *device)
1282{
1283 ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm suspend\n");
1284
1285 return 0;
1286}
1287
1288static int ath6kl_sdio_pm_resume(struct device *device)
1289{
1290 ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm resume\n");
1291
1292 return 0;
1293}
1294
1295static SIMPLE_DEV_PM_OPS(ath6kl_sdio_pm_ops, ath6kl_sdio_pm_suspend,
1296 ath6kl_sdio_pm_resume);
1297
1298#define ATH6KL_SDIO_PM_OPS (&ath6kl_sdio_pm_ops)
1299
1300#else
1301
1302#define ATH6KL_SDIO_PM_OPS NULL
1303
1304#endif /* CONFIG_PM_SLEEP */
1305
1306static int ath6kl_sdio_probe(struct sdio_func *func,
1307 const struct sdio_device_id *id)
1308{
1309 int ret;
1310 struct ath6kl_sdio *ar_sdio;
1311 struct ath6kl *ar;
1312 int count;
1313
1314 ath6kl_dbg(ATH6KL_DBG_BOOT,
1315 "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
1316 func->num, func->vendor, func->device,
1317 func->max_blksize, func->cur_blksize);
1318
1319 ar_sdio = kzalloc(sizeof(struct ath6kl_sdio), GFP_KERNEL);
1320 if (!ar_sdio)
1321 return -ENOMEM;
1322
1323 ar_sdio->dma_buffer = kzalloc(HIF_DMA_BUFFER_SIZE, GFP_KERNEL);
1324 if (!ar_sdio->dma_buffer) {
1325 ret = -ENOMEM;
1326 goto err_hif;
1327 }
1328
1329 ar_sdio->func = func;
1330 sdio_set_drvdata(func, ar_sdio);
1331
1332 ar_sdio->id = id;
1333 ar_sdio->is_disabled = true;
1334
1335 spin_lock_init(&ar_sdio->lock);
1336 spin_lock_init(&ar_sdio->scat_lock);
1337 spin_lock_init(&ar_sdio->wr_async_lock);
1338 mutex_init(&ar_sdio->dma_buffer_mutex);
1339
1340 INIT_LIST_HEAD(&ar_sdio->scat_req);
1341 INIT_LIST_HEAD(&ar_sdio->bus_req_freeq);
1342 INIT_LIST_HEAD(&ar_sdio->wr_asyncq);
1343
1344 INIT_WORK(&ar_sdio->wr_async_work, ath6kl_sdio_write_async_work);
1345
1346 init_waitqueue_head(&ar_sdio->irq_wq);
1347
1348 for (count = 0; count < BUS_REQUEST_MAX_NUM; count++)
1349 ath6kl_sdio_free_bus_req(ar_sdio, &ar_sdio->bus_req[count]);
1350
1351 ar = ath6kl_core_create(&ar_sdio->func->dev);
1352 if (!ar) {
1353 ath6kl_err("Failed to alloc ath6kl core\n");
1354 ret = -ENOMEM;
1355 goto err_dma;
1356 }
1357
1358 ar_sdio->ar = ar;
1359 ar->hif_type = ATH6KL_HIF_TYPE_SDIO;
1360 ar->hif_priv = ar_sdio;
1361 ar->hif_ops = &ath6kl_sdio_ops;
1362 ar->bmi.max_data_size = 256;
1363
1364 ath6kl_sdio_set_mbox_info(ar);
1365
1366 ret = ath6kl_sdio_config(ar);
1367 if (ret) {
1368 ath6kl_err("Failed to config sdio: %d\n", ret);
1369 goto err_core_alloc;
1370 }
1371
1372 ret = ath6kl_core_init(ar, ATH6KL_HTC_TYPE_MBOX);
1373 if (ret) {
1374 ath6kl_err("Failed to init ath6kl core\n");
1375 goto err_core_alloc;
1376 }
1377
1378 return ret;
1379
1380err_core_alloc:
1381 ath6kl_core_destroy(ar_sdio->ar);
1382err_dma:
1383 kfree(ar_sdio->dma_buffer);
1384err_hif:
1385 kfree(ar_sdio);
1386
1387 return ret;
1388}
1389
1390static void ath6kl_sdio_remove(struct sdio_func *func)
1391{
1392 struct ath6kl_sdio *ar_sdio;
1393
1394 ath6kl_dbg(ATH6KL_DBG_BOOT,
1395 "sdio removed func %d vendor 0x%x device 0x%x\n",
1396 func->num, func->vendor, func->device);
1397
1398 ar_sdio = sdio_get_drvdata(func);
1399
1400 ath6kl_stop_txrx(ar_sdio->ar);
1401 cancel_work_sync(&ar_sdio->wr_async_work);
1402
1403 ath6kl_core_cleanup(ar_sdio->ar);
1404 ath6kl_core_destroy(ar_sdio->ar);
1405
1406 kfree(ar_sdio->dma_buffer);
1407 kfree(ar_sdio);
1408}
1409
1410static const struct sdio_device_id ath6kl_sdio_devices[] = {
1411 {SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6003_00)},
1412 {SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6003_01)},
1413 {SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_00)},
1414 {SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_01)},
1415 {SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_02)},
1416 {SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_18)},
1417 {SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_AR6004_19)},
1418 {},
1419};
1420
1421MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
1422
1423static struct sdio_driver ath6kl_sdio_driver = {
1424 .name = "ath6kl_sdio",
1425 .id_table = ath6kl_sdio_devices,
1426 .probe = ath6kl_sdio_probe,
1427 .remove = ath6kl_sdio_remove,
1428 .drv.pm = ATH6KL_SDIO_PM_OPS,
1429};
1430
1431static int __init ath6kl_sdio_init(void)
1432{
1433 int ret;
1434
1435 ret = sdio_register_driver(&ath6kl_sdio_driver);
1436 if (ret)
1437 ath6kl_err("sdio driver registration failed: %d\n", ret);
1438
1439 return ret;
1440}
1441
1442static void __exit ath6kl_sdio_exit(void)
1443{
1444 sdio_unregister_driver(&ath6kl_sdio_driver);
1445}
1446
1447module_init(ath6kl_sdio_init);
1448module_exit(ath6kl_sdio_exit);
1449
1450MODULE_AUTHOR("Atheros Communications, Inc.");
1451MODULE_DESCRIPTION("Driver support for Atheros AR600x SDIO devices");
1452MODULE_LICENSE("Dual BSD/GPL");
1453
1454MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_OTP_FILE);
1455MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_FIRMWARE_FILE);
1456MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_PATCH_FILE);
1457MODULE_FIRMWARE(AR6003_HW_2_0_BOARD_DATA_FILE);
1458MODULE_FIRMWARE(AR6003_HW_2_0_DEFAULT_BOARD_DATA_FILE);
1459MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_OTP_FILE);
1460MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_FIRMWARE_FILE);
1461MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_PATCH_FILE);
1462MODULE_FIRMWARE(AR6003_HW_2_1_1_BOARD_DATA_FILE);
1463MODULE_FIRMWARE(AR6003_HW_2_1_1_DEFAULT_BOARD_DATA_FILE);
1464MODULE_FIRMWARE(AR6004_HW_1_0_FW_DIR "/" AR6004_HW_1_0_FIRMWARE_FILE);
1465MODULE_FIRMWARE(AR6004_HW_1_0_BOARD_DATA_FILE);
1466MODULE_FIRMWARE(AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE);
1467MODULE_FIRMWARE(AR6004_HW_1_1_FW_DIR "/" AR6004_HW_1_1_FIRMWARE_FILE);
1468MODULE_FIRMWARE(AR6004_HW_1_1_BOARD_DATA_FILE);
1469MODULE_FIRMWARE(AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE);
1470MODULE_FIRMWARE(AR6004_HW_1_2_FW_DIR "/" AR6004_HW_1_2_FIRMWARE_FILE);
1471MODULE_FIRMWARE(AR6004_HW_1_2_BOARD_DATA_FILE);
1472MODULE_FIRMWARE(AR6004_HW_1_2_DEFAULT_BOARD_DATA_FILE);
1473MODULE_FIRMWARE(AR6004_HW_1_3_FW_DIR "/" AR6004_HW_1_3_FIRMWARE_FILE);
1474MODULE_FIRMWARE(AR6004_HW_1_3_BOARD_DATA_FILE);
1475MODULE_FIRMWARE(AR6004_HW_1_3_DEFAULT_BOARD_DATA_FILE);
1/*
2 * Copyright (c) 2004-2011 Atheros Communications Inc.
3 * Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
4 *
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
8 *
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16 */
17
18#include <linux/module.h>
19#include <linux/mmc/card.h>
20#include <linux/mmc/mmc.h>
21#include <linux/mmc/host.h>
22#include <linux/mmc/sdio_func.h>
23#include <linux/mmc/sdio_ids.h>
24#include <linux/mmc/sdio.h>
25#include <linux/mmc/sd.h>
26#include "hif.h"
27#include "hif-ops.h"
28#include "target.h"
29#include "debug.h"
30#include "cfg80211.h"
31
32struct ath6kl_sdio {
33 struct sdio_func *func;
34
35 /* protects access to bus_req_freeq */
36 spinlock_t lock;
37
38 /* free list */
39 struct list_head bus_req_freeq;
40
41 /* available bus requests */
42 struct bus_request bus_req[BUS_REQUEST_MAX_NUM];
43
44 struct ath6kl *ar;
45
46 u8 *dma_buffer;
47
48 /* protects access to dma_buffer */
49 struct mutex dma_buffer_mutex;
50
51 /* scatter request list head */
52 struct list_head scat_req;
53
54 atomic_t irq_handling;
55 wait_queue_head_t irq_wq;
56
57 /* protects access to scat_req */
58 spinlock_t scat_lock;
59
60 bool scatter_enabled;
61
62 bool is_disabled;
63 const struct sdio_device_id *id;
64 struct work_struct wr_async_work;
65 struct list_head wr_asyncq;
66
67 /* protects access to wr_asyncq */
68 spinlock_t wr_async_lock;
69};
70
71#define CMD53_ARG_READ 0
72#define CMD53_ARG_WRITE 1
73#define CMD53_ARG_BLOCK_BASIS 1
74#define CMD53_ARG_FIXED_ADDRESS 0
75#define CMD53_ARG_INCR_ADDRESS 1
76
77static inline struct ath6kl_sdio *ath6kl_sdio_priv(struct ath6kl *ar)
78{
79 return ar->hif_priv;
80}
81
82/*
83 * Macro to check if DMA buffer is WORD-aligned and DMA-able.
84 * Most host controllers assume the buffer is DMA'able and will
85 * bug-check otherwise (i.e. buffers on the stack). virt_addr_valid
86 * check fails on stack memory.
87 */
88static inline bool buf_needs_bounce(u8 *buf)
89{
90 return ((unsigned long) buf & 0x3) || !virt_addr_valid(buf);
91}
92
93static void ath6kl_sdio_set_mbox_info(struct ath6kl *ar)
94{
95 struct ath6kl_mbox_info *mbox_info = &ar->mbox_info;
96
97 /* EP1 has an extended range */
98 mbox_info->htc_addr = HIF_MBOX_BASE_ADDR;
99 mbox_info->htc_ext_addr = HIF_MBOX0_EXT_BASE_ADDR;
100 mbox_info->htc_ext_sz = HIF_MBOX0_EXT_WIDTH;
101 mbox_info->block_size = HIF_MBOX_BLOCK_SIZE;
102 mbox_info->gmbox_addr = HIF_GMBOX_BASE_ADDR;
103 mbox_info->gmbox_sz = HIF_GMBOX_WIDTH;
104}
105
106static inline void ath6kl_sdio_set_cmd53_arg(u32 *arg, u8 rw, u8 func,
107 u8 mode, u8 opcode, u32 addr,
108 u16 blksz)
109{
110 *arg = (((rw & 1) << 31) |
111 ((func & 0x7) << 28) |
112 ((mode & 1) << 27) |
113 ((opcode & 1) << 26) |
114 ((addr & 0x1FFFF) << 9) |
115 (blksz & 0x1FF));
116}
117
118static inline void ath6kl_sdio_set_cmd52_arg(u32 *arg, u8 write, u8 raw,
119 unsigned int address,
120 unsigned char val)
121{
122 const u8 func = 0;
123
124 *arg = ((write & 1) << 31) |
125 ((func & 0x7) << 28) |
126 ((raw & 1) << 27) |
127 (1 << 26) |
128 ((address & 0x1FFFF) << 9) |
129 (1 << 8) |
130 (val & 0xFF);
131}
132
133static int ath6kl_sdio_func0_cmd52_wr_byte(struct mmc_card *card,
134 unsigned int address,
135 unsigned char byte)
136{
137 struct mmc_command io_cmd;
138
139 memset(&io_cmd, 0, sizeof(io_cmd));
140 ath6kl_sdio_set_cmd52_arg(&io_cmd.arg, 1, 0, address, byte);
141 io_cmd.opcode = SD_IO_RW_DIRECT;
142 io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
143
144 return mmc_wait_for_cmd(card->host, &io_cmd, 0);
145}
146
147static int ath6kl_sdio_io(struct sdio_func *func, u32 request, u32 addr,
148 u8 *buf, u32 len)
149{
150 int ret = 0;
151
152 sdio_claim_host(func);
153
154 if (request & HIF_WRITE) {
155 /* FIXME: looks like ugly workaround for something */
156 if (addr >= HIF_MBOX_BASE_ADDR &&
157 addr <= HIF_MBOX_END_ADDR)
158 addr += (HIF_MBOX_WIDTH - len);
159
160 /* FIXME: this also looks like ugly workaround */
161 if (addr == HIF_MBOX0_EXT_BASE_ADDR)
162 addr += HIF_MBOX0_EXT_WIDTH - len;
163
164 if (request & HIF_FIXED_ADDRESS)
165 ret = sdio_writesb(func, addr, buf, len);
166 else
167 ret = sdio_memcpy_toio(func, addr, buf, len);
168 } else {
169 if (request & HIF_FIXED_ADDRESS)
170 ret = sdio_readsb(func, buf, addr, len);
171 else
172 ret = sdio_memcpy_fromio(func, buf, addr, len);
173 }
174
175 sdio_release_host(func);
176
177 ath6kl_dbg(ATH6KL_DBG_SDIO, "%s addr 0x%x%s buf 0x%p len %d\n",
178 request & HIF_WRITE ? "wr" : "rd", addr,
179 request & HIF_FIXED_ADDRESS ? " (fixed)" : "", buf, len);
180 ath6kl_dbg_dump(ATH6KL_DBG_SDIO_DUMP, NULL, "sdio ", buf, len);
181
182 return ret;
183}
184
185static struct bus_request *ath6kl_sdio_alloc_busreq(struct ath6kl_sdio *ar_sdio)
186{
187 struct bus_request *bus_req;
188
189 spin_lock_bh(&ar_sdio->lock);
190
191 if (list_empty(&ar_sdio->bus_req_freeq)) {
192 spin_unlock_bh(&ar_sdio->lock);
193 return NULL;
194 }
195
196 bus_req = list_first_entry(&ar_sdio->bus_req_freeq,
197 struct bus_request, list);
198 list_del(&bus_req->list);
199
200 spin_unlock_bh(&ar_sdio->lock);
201 ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n",
202 __func__, bus_req);
203
204 return bus_req;
205}
206
207static void ath6kl_sdio_free_bus_req(struct ath6kl_sdio *ar_sdio,
208 struct bus_request *bus_req)
209{
210 ath6kl_dbg(ATH6KL_DBG_SCATTER, "%s: bus request 0x%p\n",
211 __func__, bus_req);
212
213 spin_lock_bh(&ar_sdio->lock);
214 list_add_tail(&bus_req->list, &ar_sdio->bus_req_freeq);
215 spin_unlock_bh(&ar_sdio->lock);
216}
217
218static void ath6kl_sdio_setup_scat_data(struct hif_scatter_req *scat_req,
219 struct mmc_data *data)
220{
221 struct scatterlist *sg;
222 int i;
223
224 data->blksz = HIF_MBOX_BLOCK_SIZE;
225 data->blocks = scat_req->len / HIF_MBOX_BLOCK_SIZE;
226
227 ath6kl_dbg(ATH6KL_DBG_SCATTER,
228 "hif-scatter: (%s) addr: 0x%X, (block len: %d, block count: %d) , (tot:%d,sg:%d)\n",
229 (scat_req->req & HIF_WRITE) ? "WR" : "RD", scat_req->addr,
230 data->blksz, data->blocks, scat_req->len,
231 scat_req->scat_entries);
232
233 data->flags = (scat_req->req & HIF_WRITE) ? MMC_DATA_WRITE :
234 MMC_DATA_READ;
235
236 /* fill SG entries */
237 sg = scat_req->sgentries;
238 sg_init_table(sg, scat_req->scat_entries);
239
240 /* assemble SG list */
241 for (i = 0; i < scat_req->scat_entries; i++, sg++) {
242 ath6kl_dbg(ATH6KL_DBG_SCATTER, "%d: addr:0x%p, len:%d\n",
243 i, scat_req->scat_list[i].buf,
244 scat_req->scat_list[i].len);
245
246 sg_set_buf(sg, scat_req->scat_list[i].buf,
247 scat_req->scat_list[i].len);
248 }
249
250 /* set scatter-gather table for request */
251 data->sg = scat_req->sgentries;
252 data->sg_len = scat_req->scat_entries;
253}
254
255static int ath6kl_sdio_scat_rw(struct ath6kl_sdio *ar_sdio,
256 struct bus_request *req)
257{
258 struct mmc_request mmc_req;
259 struct mmc_command cmd;
260 struct mmc_data data;
261 struct hif_scatter_req *scat_req;
262 u8 opcode, rw;
263 int status, len;
264
265 scat_req = req->scat_req;
266
267 if (scat_req->virt_scat) {
268 len = scat_req->len;
269 if (scat_req->req & HIF_BLOCK_BASIS)
270 len = round_down(len, HIF_MBOX_BLOCK_SIZE);
271
272 status = ath6kl_sdio_io(ar_sdio->func, scat_req->req,
273 scat_req->addr, scat_req->virt_dma_buf,
274 len);
275 goto scat_complete;
276 }
277
278 memset(&mmc_req, 0, sizeof(struct mmc_request));
279 memset(&cmd, 0, sizeof(struct mmc_command));
280 memset(&data, 0, sizeof(struct mmc_data));
281
282 ath6kl_sdio_setup_scat_data(scat_req, &data);
283
284 opcode = (scat_req->req & HIF_FIXED_ADDRESS) ?
285 CMD53_ARG_FIXED_ADDRESS : CMD53_ARG_INCR_ADDRESS;
286
287 rw = (scat_req->req & HIF_WRITE) ? CMD53_ARG_WRITE : CMD53_ARG_READ;
288
289 /* Fixup the address so that the last byte will fall on MBOX EOM */
290 if (scat_req->req & HIF_WRITE) {
291 if (scat_req->addr == HIF_MBOX_BASE_ADDR)
292 scat_req->addr += HIF_MBOX_WIDTH - scat_req->len;
293 else
294 /* Uses extended address range */
295 scat_req->addr += HIF_MBOX0_EXT_WIDTH - scat_req->len;
296 }
297
298 /* set command argument */
299 ath6kl_sdio_set_cmd53_arg(&cmd.arg, rw, ar_sdio->func->num,
300 CMD53_ARG_BLOCK_BASIS, opcode, scat_req->addr,
301 data.blocks);
302
303 cmd.opcode = SD_IO_RW_EXTENDED;
304 cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
305
306 mmc_req.cmd = &cmd;
307 mmc_req.data = &data;
308
309 sdio_claim_host(ar_sdio->func);
310
311 mmc_set_data_timeout(&data, ar_sdio->func->card);
312 /* synchronous call to process request */
313 mmc_wait_for_req(ar_sdio->func->card->host, &mmc_req);
314
315 sdio_release_host(ar_sdio->func);
316
317 status = cmd.error ? cmd.error : data.error;
318
319scat_complete:
320 scat_req->status = status;
321
322 if (scat_req->status)
323 ath6kl_err("Scatter write request failed:%d\n",
324 scat_req->status);
325
326 if (scat_req->req & HIF_ASYNCHRONOUS)
327 scat_req->complete(ar_sdio->ar->htc_target, scat_req);
328
329 return status;
330}
331
332static int ath6kl_sdio_alloc_prep_scat_req(struct ath6kl_sdio *ar_sdio,
333 int n_scat_entry, int n_scat_req,
334 bool virt_scat)
335{
336 struct hif_scatter_req *s_req;
337 struct bus_request *bus_req;
338 int i, scat_req_sz, scat_list_sz, sg_sz, buf_sz;
339 u8 *virt_buf;
340
341 scat_list_sz = (n_scat_entry - 1) * sizeof(struct hif_scatter_item);
342 scat_req_sz = sizeof(*s_req) + scat_list_sz;
343
344 if (!virt_scat)
345 sg_sz = sizeof(struct scatterlist) * n_scat_entry;
346 else
347 buf_sz = 2 * L1_CACHE_BYTES +
348 ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER;
349
350 for (i = 0; i < n_scat_req; i++) {
351 /* allocate the scatter request */
352 s_req = kzalloc(scat_req_sz, GFP_KERNEL);
353 if (!s_req)
354 return -ENOMEM;
355
356 if (virt_scat) {
357 virt_buf = kzalloc(buf_sz, GFP_KERNEL);
358 if (!virt_buf) {
359 kfree(s_req);
360 return -ENOMEM;
361 }
362
363 s_req->virt_dma_buf =
364 (u8 *)L1_CACHE_ALIGN((unsigned long)virt_buf);
365 } else {
366 /* allocate sglist */
367 s_req->sgentries = kzalloc(sg_sz, GFP_KERNEL);
368
369 if (!s_req->sgentries) {
370 kfree(s_req);
371 return -ENOMEM;
372 }
373 }
374
375 /* allocate a bus request for this scatter request */
376 bus_req = ath6kl_sdio_alloc_busreq(ar_sdio);
377 if (!bus_req) {
378 kfree(s_req->sgentries);
379 kfree(s_req->virt_dma_buf);
380 kfree(s_req);
381 return -ENOMEM;
382 }
383
384 /* assign the scatter request to this bus request */
385 bus_req->scat_req = s_req;
386 s_req->busrequest = bus_req;
387
388 s_req->virt_scat = virt_scat;
389
390 /* add it to the scatter pool */
391 hif_scatter_req_add(ar_sdio->ar, s_req);
392 }
393
394 return 0;
395}
396
397static int ath6kl_sdio_read_write_sync(struct ath6kl *ar, u32 addr, u8 *buf,
398 u32 len, u32 request)
399{
400 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
401 u8 *tbuf = NULL;
402 int ret;
403 bool bounced = false;
404
405 if (request & HIF_BLOCK_BASIS)
406 len = round_down(len, HIF_MBOX_BLOCK_SIZE);
407
408 if (buf_needs_bounce(buf)) {
409 if (!ar_sdio->dma_buffer)
410 return -ENOMEM;
411 mutex_lock(&ar_sdio->dma_buffer_mutex);
412 tbuf = ar_sdio->dma_buffer;
413
414 if (request & HIF_WRITE)
415 memcpy(tbuf, buf, len);
416
417 bounced = true;
418 } else
419 tbuf = buf;
420
421 ret = ath6kl_sdio_io(ar_sdio->func, request, addr, tbuf, len);
422 if ((request & HIF_READ) && bounced)
423 memcpy(buf, tbuf, len);
424
425 if (bounced)
426 mutex_unlock(&ar_sdio->dma_buffer_mutex);
427
428 return ret;
429}
430
431static void __ath6kl_sdio_write_async(struct ath6kl_sdio *ar_sdio,
432 struct bus_request *req)
433{
434 if (req->scat_req)
435 ath6kl_sdio_scat_rw(ar_sdio, req);
436 else {
437 void *context;
438 int status;
439
440 status = ath6kl_sdio_read_write_sync(ar_sdio->ar, req->address,
441 req->buffer, req->length,
442 req->request);
443 context = req->packet;
444 ath6kl_sdio_free_bus_req(ar_sdio, req);
445 ath6kl_hif_rw_comp_handler(context, status);
446 }
447}
448
449static void ath6kl_sdio_write_async_work(struct work_struct *work)
450{
451 struct ath6kl_sdio *ar_sdio;
452 struct bus_request *req, *tmp_req;
453
454 ar_sdio = container_of(work, struct ath6kl_sdio, wr_async_work);
455
456 spin_lock_bh(&ar_sdio->wr_async_lock);
457 list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) {
458 list_del(&req->list);
459 spin_unlock_bh(&ar_sdio->wr_async_lock);
460 __ath6kl_sdio_write_async(ar_sdio, req);
461 spin_lock_bh(&ar_sdio->wr_async_lock);
462 }
463 spin_unlock_bh(&ar_sdio->wr_async_lock);
464}
465
466static void ath6kl_sdio_irq_handler(struct sdio_func *func)
467{
468 int status;
469 struct ath6kl_sdio *ar_sdio;
470
471 ath6kl_dbg(ATH6KL_DBG_SDIO, "irq\n");
472
473 ar_sdio = sdio_get_drvdata(func);
474 atomic_set(&ar_sdio->irq_handling, 1);
475 /*
476 * Release the host during interrups so we can pick it back up when
477 * we process commands.
478 */
479 sdio_release_host(ar_sdio->func);
480
481 status = ath6kl_hif_intr_bh_handler(ar_sdio->ar);
482 sdio_claim_host(ar_sdio->func);
483
484 atomic_set(&ar_sdio->irq_handling, 0);
485 wake_up(&ar_sdio->irq_wq);
486
487 WARN_ON(status && status != -ECANCELED);
488}
489
490static int ath6kl_sdio_power_on(struct ath6kl *ar)
491{
492 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
493 struct sdio_func *func = ar_sdio->func;
494 int ret = 0;
495
496 if (!ar_sdio->is_disabled)
497 return 0;
498
499 ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power on\n");
500
501 sdio_claim_host(func);
502
503 ret = sdio_enable_func(func);
504 if (ret) {
505 ath6kl_err("Unable to enable sdio func: %d)\n", ret);
506 sdio_release_host(func);
507 return ret;
508 }
509
510 sdio_release_host(func);
511
512 /*
513 * Wait for hardware to initialise. It should take a lot less than
514 * 10 ms but let's be conservative here.
515 */
516 msleep(10);
517
518 ar_sdio->is_disabled = false;
519
520 return ret;
521}
522
523static int ath6kl_sdio_power_off(struct ath6kl *ar)
524{
525 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
526 int ret;
527
528 if (ar_sdio->is_disabled)
529 return 0;
530
531 ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power off\n");
532
533 /* Disable the card */
534 sdio_claim_host(ar_sdio->func);
535 ret = sdio_disable_func(ar_sdio->func);
536 sdio_release_host(ar_sdio->func);
537
538 if (ret)
539 return ret;
540
541 ar_sdio->is_disabled = true;
542
543 return ret;
544}
545
546static int ath6kl_sdio_write_async(struct ath6kl *ar, u32 address, u8 *buffer,
547 u32 length, u32 request,
548 struct htc_packet *packet)
549{
550 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
551 struct bus_request *bus_req;
552
553 bus_req = ath6kl_sdio_alloc_busreq(ar_sdio);
554
555 if (WARN_ON_ONCE(!bus_req))
556 return -ENOMEM;
557
558 bus_req->address = address;
559 bus_req->buffer = buffer;
560 bus_req->length = length;
561 bus_req->request = request;
562 bus_req->packet = packet;
563
564 spin_lock_bh(&ar_sdio->wr_async_lock);
565 list_add_tail(&bus_req->list, &ar_sdio->wr_asyncq);
566 spin_unlock_bh(&ar_sdio->wr_async_lock);
567 queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work);
568
569 return 0;
570}
571
572static void ath6kl_sdio_irq_enable(struct ath6kl *ar)
573{
574 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
575 int ret;
576
577 sdio_claim_host(ar_sdio->func);
578
579 /* Register the isr */
580 ret = sdio_claim_irq(ar_sdio->func, ath6kl_sdio_irq_handler);
581 if (ret)
582 ath6kl_err("Failed to claim sdio irq: %d\n", ret);
583
584 sdio_release_host(ar_sdio->func);
585}
586
587static bool ath6kl_sdio_is_on_irq(struct ath6kl *ar)
588{
589 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
590
591 return !atomic_read(&ar_sdio->irq_handling);
592}
593
594static void ath6kl_sdio_irq_disable(struct ath6kl *ar)
595{
596 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
597 int ret;
598
599 sdio_claim_host(ar_sdio->func);
600
601 if (atomic_read(&ar_sdio->irq_handling)) {
602 sdio_release_host(ar_sdio->func);
603
604 ret = wait_event_interruptible(ar_sdio->irq_wq,
605 ath6kl_sdio_is_on_irq(ar));
606 if (ret)
607 return;
608
609 sdio_claim_host(ar_sdio->func);
610 }
611
612 ret = sdio_release_irq(ar_sdio->func);
613 if (ret)
614 ath6kl_err("Failed to release sdio irq: %d\n", ret);
615
616 sdio_release_host(ar_sdio->func);
617}
618
619static struct hif_scatter_req *ath6kl_sdio_scatter_req_get(struct ath6kl *ar)
620{
621 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
622 struct hif_scatter_req *node = NULL;
623
624 spin_lock_bh(&ar_sdio->scat_lock);
625
626 if (!list_empty(&ar_sdio->scat_req)) {
627 node = list_first_entry(&ar_sdio->scat_req,
628 struct hif_scatter_req, list);
629 list_del(&node->list);
630
631 node->scat_q_depth = get_queue_depth(&ar_sdio->scat_req);
632 }
633
634 spin_unlock_bh(&ar_sdio->scat_lock);
635
636 return node;
637}
638
639static void ath6kl_sdio_scatter_req_add(struct ath6kl *ar,
640 struct hif_scatter_req *s_req)
641{
642 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
643
644 spin_lock_bh(&ar_sdio->scat_lock);
645
646 list_add_tail(&s_req->list, &ar_sdio->scat_req);
647
648 spin_unlock_bh(&ar_sdio->scat_lock);
649
650}
651
652/* scatter gather read write request */
653static int ath6kl_sdio_async_rw_scatter(struct ath6kl *ar,
654 struct hif_scatter_req *scat_req)
655{
656 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
657 u32 request = scat_req->req;
658 int status = 0;
659
660 if (!scat_req->len)
661 return -EINVAL;
662
663 ath6kl_dbg(ATH6KL_DBG_SCATTER,
664 "hif-scatter: total len: %d scatter entries: %d\n",
665 scat_req->len, scat_req->scat_entries);
666
667 if (request & HIF_SYNCHRONOUS)
668 status = ath6kl_sdio_scat_rw(ar_sdio, scat_req->busrequest);
669 else {
670 spin_lock_bh(&ar_sdio->wr_async_lock);
671 list_add_tail(&scat_req->busrequest->list, &ar_sdio->wr_asyncq);
672 spin_unlock_bh(&ar_sdio->wr_async_lock);
673 queue_work(ar->ath6kl_wq, &ar_sdio->wr_async_work);
674 }
675
676 return status;
677}
678
679/* clean up scatter support */
680static void ath6kl_sdio_cleanup_scatter(struct ath6kl *ar)
681{
682 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
683 struct hif_scatter_req *s_req, *tmp_req;
684
685 /* empty the free list */
686 spin_lock_bh(&ar_sdio->scat_lock);
687 list_for_each_entry_safe(s_req, tmp_req, &ar_sdio->scat_req, list) {
688 list_del(&s_req->list);
689 spin_unlock_bh(&ar_sdio->scat_lock);
690
691 /*
692 * FIXME: should we also call completion handler with
693 * ath6kl_hif_rw_comp_handler() with status -ECANCELED so
694 * that the packet is properly freed?
695 */
696 if (s_req->busrequest)
697 ath6kl_sdio_free_bus_req(ar_sdio, s_req->busrequest);
698 kfree(s_req->virt_dma_buf);
699 kfree(s_req->sgentries);
700 kfree(s_req);
701
702 spin_lock_bh(&ar_sdio->scat_lock);
703 }
704 spin_unlock_bh(&ar_sdio->scat_lock);
705}
706
707/* setup of HIF scatter resources */
708static int ath6kl_sdio_enable_scatter(struct ath6kl *ar)
709{
710 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
711 struct htc_target *target = ar->htc_target;
712 int ret;
713 bool virt_scat = false;
714
715 if (ar_sdio->scatter_enabled)
716 return 0;
717
718 ar_sdio->scatter_enabled = true;
719
720 /* check if host supports scatter and it meets our requirements */
721 if (ar_sdio->func->card->host->max_segs < MAX_SCATTER_ENTRIES_PER_REQ) {
722 ath6kl_err("host only supports scatter of :%d entries, need: %d\n",
723 ar_sdio->func->card->host->max_segs,
724 MAX_SCATTER_ENTRIES_PER_REQ);
725 virt_scat = true;
726 }
727
728 if (!virt_scat) {
729 ret = ath6kl_sdio_alloc_prep_scat_req(ar_sdio,
730 MAX_SCATTER_ENTRIES_PER_REQ,
731 MAX_SCATTER_REQUESTS, virt_scat);
732
733 if (!ret) {
734 ath6kl_dbg(ATH6KL_DBG_BOOT,
735 "hif-scatter enabled requests %d entries %d\n",
736 MAX_SCATTER_REQUESTS,
737 MAX_SCATTER_ENTRIES_PER_REQ);
738
739 target->max_scat_entries = MAX_SCATTER_ENTRIES_PER_REQ;
740 target->max_xfer_szper_scatreq =
741 MAX_SCATTER_REQ_TRANSFER_SIZE;
742 } else {
743 ath6kl_sdio_cleanup_scatter(ar);
744 ath6kl_warn("hif scatter resource setup failed, trying virtual scatter method\n");
745 }
746 }
747
748 if (virt_scat || ret) {
749 ret = ath6kl_sdio_alloc_prep_scat_req(ar_sdio,
750 ATH6KL_SCATTER_ENTRIES_PER_REQ,
751 ATH6KL_SCATTER_REQS, virt_scat);
752
753 if (ret) {
754 ath6kl_err("failed to alloc virtual scatter resources !\n");
755 ath6kl_sdio_cleanup_scatter(ar);
756 return ret;
757 }
758
759 ath6kl_dbg(ATH6KL_DBG_BOOT,
760 "virtual scatter enabled requests %d entries %d\n",
761 ATH6KL_SCATTER_REQS, ATH6KL_SCATTER_ENTRIES_PER_REQ);
762
763 target->max_scat_entries = ATH6KL_SCATTER_ENTRIES_PER_REQ;
764 target->max_xfer_szper_scatreq =
765 ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER;
766 }
767
768 return 0;
769}
770
771static int ath6kl_sdio_config(struct ath6kl *ar)
772{
773 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
774 struct sdio_func *func = ar_sdio->func;
775 int ret;
776
777 sdio_claim_host(func);
778
779 if ((ar_sdio->id->device & MANUFACTURER_ID_ATH6KL_BASE_MASK) >=
780 MANUFACTURER_ID_AR6003_BASE) {
781 /* enable 4-bit ASYNC interrupt on AR6003 or later */
782 ret = ath6kl_sdio_func0_cmd52_wr_byte(func->card,
783 CCCR_SDIO_IRQ_MODE_REG,
784 SDIO_IRQ_MODE_ASYNC_4BIT_IRQ);
785 if (ret) {
786 ath6kl_err("Failed to enable 4-bit async irq mode %d\n",
787 ret);
788 goto out;
789 }
790
791 ath6kl_dbg(ATH6KL_DBG_BOOT, "4-bit async irq mode enabled\n");
792 }
793
794 /* give us some time to enable, in ms */
795 func->enable_timeout = 100;
796
797 ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE);
798 if (ret) {
799 ath6kl_err("Set sdio block size %d failed: %d)\n",
800 HIF_MBOX_BLOCK_SIZE, ret);
801 goto out;
802 }
803
804out:
805 sdio_release_host(func);
806
807 return ret;
808}
809
810static int ath6kl_set_sdio_pm_caps(struct ath6kl *ar)
811{
812 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
813 struct sdio_func *func = ar_sdio->func;
814 mmc_pm_flag_t flags;
815 int ret;
816
817 flags = sdio_get_host_pm_caps(func);
818
819 ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio suspend pm_caps 0x%x\n", flags);
820
821 if (!(flags & MMC_PM_WAKE_SDIO_IRQ) ||
822 !(flags & MMC_PM_KEEP_POWER))
823 return -EINVAL;
824
825 ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
826 if (ret) {
827 ath6kl_err("set sdio keep pwr flag failed: %d\n", ret);
828 return ret;
829 }
830
831 /* sdio irq wakes up host */
832 ret = sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ);
833 if (ret)
834 ath6kl_err("set sdio wake irq flag failed: %d\n", ret);
835
836 return ret;
837}
838
839static int ath6kl_sdio_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
840{
841 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
842 struct sdio_func *func = ar_sdio->func;
843 mmc_pm_flag_t flags;
844 bool try_deepsleep = false;
845 int ret;
846
847 if (ar->state == ATH6KL_STATE_SCHED_SCAN) {
848 ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sched scan is in progress\n");
849
850 ret = ath6kl_set_sdio_pm_caps(ar);
851 if (ret)
852 goto cut_pwr;
853
854 ret = ath6kl_cfg80211_suspend(ar,
855 ATH6KL_CFG_SUSPEND_SCHED_SCAN,
856 NULL);
857 if (ret)
858 goto cut_pwr;
859
860 return 0;
861 }
862
863 if (ar->suspend_mode == WLAN_POWER_STATE_WOW ||
864 (!ar->suspend_mode && wow)) {
865
866 ret = ath6kl_set_sdio_pm_caps(ar);
867 if (ret)
868 goto cut_pwr;
869
870 ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_WOW, wow);
871 if (ret && ret != -ENOTCONN)
872 ath6kl_err("wow suspend failed: %d\n", ret);
873
874 if (ret &&
875 (!ar->wow_suspend_mode ||
876 ar->wow_suspend_mode == WLAN_POWER_STATE_DEEP_SLEEP))
877 try_deepsleep = true;
878 else if (ret &&
879 ar->wow_suspend_mode == WLAN_POWER_STATE_CUT_PWR)
880 goto cut_pwr;
881 if (!ret)
882 return 0;
883 }
884
885 if (ar->suspend_mode == WLAN_POWER_STATE_DEEP_SLEEP ||
886 !ar->suspend_mode || try_deepsleep) {
887
888 flags = sdio_get_host_pm_caps(func);
889 if (!(flags & MMC_PM_KEEP_POWER))
890 goto cut_pwr;
891
892 ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
893 if (ret)
894 goto cut_pwr;
895
896 /*
897 * Workaround to support Deep Sleep with MSM, set the host pm
898 * flag as MMC_PM_WAKE_SDIO_IRQ to allow SDCC deiver to disable
899 * the sdc2_clock and internally allows MSM to enter
900 * TCXO shutdown properly.
901 */
902 if ((flags & MMC_PM_WAKE_SDIO_IRQ)) {
903 ret = sdio_set_host_pm_flags(func,
904 MMC_PM_WAKE_SDIO_IRQ);
905 if (ret)
906 goto cut_pwr;
907 }
908
909 ret = ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_DEEPSLEEP,
910 NULL);
911 if (ret)
912 goto cut_pwr;
913
914 return 0;
915 }
916
917cut_pwr:
918 if (func->card && func->card->host)
919 func->card->host->pm_flags &= ~MMC_PM_KEEP_POWER;
920
921 return ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_CUTPOWER, NULL);
922}
923
924static int ath6kl_sdio_resume(struct ath6kl *ar)
925{
926 switch (ar->state) {
927 case ATH6KL_STATE_OFF:
928 case ATH6KL_STATE_CUTPOWER:
929 ath6kl_dbg(ATH6KL_DBG_SUSPEND,
930 "sdio resume configuring sdio\n");
931
932 /* need to set sdio settings after power is cut from sdio */
933 ath6kl_sdio_config(ar);
934 break;
935
936 case ATH6KL_STATE_ON:
937 break;
938
939 case ATH6KL_STATE_DEEPSLEEP:
940 break;
941
942 case ATH6KL_STATE_WOW:
943 break;
944
945 case ATH6KL_STATE_SCHED_SCAN:
946 break;
947
948 case ATH6KL_STATE_SUSPENDING:
949 break;
950
951 case ATH6KL_STATE_RESUMING:
952 break;
953 }
954
955 ath6kl_cfg80211_resume(ar);
956
957 return 0;
958}
959
960/* set the window address register (using 4-byte register access ). */
961static int ath6kl_set_addrwin_reg(struct ath6kl *ar, u32 reg_addr, u32 addr)
962{
963 int status;
964 u8 addr_val[4];
965 s32 i;
966
967 /*
968 * Write bytes 1,2,3 of the register to set the upper address bytes,
969 * the LSB is written last to initiate the access cycle
970 */
971
972 for (i = 1; i <= 3; i++) {
973 /*
974 * Fill the buffer with the address byte value we want to
975 * hit 4 times.
976 */
977 memset(addr_val, ((u8 *)&addr)[i], 4);
978
979 /*
980 * Hit each byte of the register address with a 4-byte
981 * write operation to the same address, this is a harmless
982 * operation.
983 */
984 status = ath6kl_sdio_read_write_sync(ar, reg_addr + i, addr_val,
985 4, HIF_WR_SYNC_BYTE_FIX);
986 if (status)
987 break;
988 }
989
990 if (status) {
991 ath6kl_err("%s: failed to write initial bytes of 0x%x to window reg: 0x%X\n",
992 __func__, addr, reg_addr);
993 return status;
994 }
995
996 /*
997 * Write the address register again, this time write the whole
998 * 4-byte value. The effect here is that the LSB write causes the
999 * cycle to start, the extra 3 byte write to bytes 1,2,3 has no
1000 * effect since we are writing the same values again
1001 */
1002 status = ath6kl_sdio_read_write_sync(ar, reg_addr, (u8 *)(&addr),
1003 4, HIF_WR_SYNC_BYTE_INC);
1004
1005 if (status) {
1006 ath6kl_err("%s: failed to write 0x%x to window reg: 0x%X\n",
1007 __func__, addr, reg_addr);
1008 return status;
1009 }
1010
1011 return 0;
1012}
1013
1014static int ath6kl_sdio_diag_read32(struct ath6kl *ar, u32 address, u32 *data)
1015{
1016 int status;
1017
1018 /* set window register to start read cycle */
1019 status = ath6kl_set_addrwin_reg(ar, WINDOW_READ_ADDR_ADDRESS,
1020 address);
1021
1022 if (status)
1023 return status;
1024
1025 /* read the data */
1026 status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
1027 (u8 *)data, sizeof(u32), HIF_RD_SYNC_BYTE_INC);
1028 if (status) {
1029 ath6kl_err("%s: failed to read from window data addr\n",
1030 __func__);
1031 return status;
1032 }
1033
1034 return status;
1035}
1036
1037static int ath6kl_sdio_diag_write32(struct ath6kl *ar, u32 address,
1038 __le32 data)
1039{
1040 int status;
1041 u32 val = (__force u32) data;
1042
1043 /* set write data */
1044 status = ath6kl_sdio_read_write_sync(ar, WINDOW_DATA_ADDRESS,
1045 (u8 *) &val, sizeof(u32), HIF_WR_SYNC_BYTE_INC);
1046 if (status) {
1047 ath6kl_err("%s: failed to write 0x%x to window data addr\n",
1048 __func__, data);
1049 return status;
1050 }
1051
1052 /* set window register, which starts the write cycle */
1053 return ath6kl_set_addrwin_reg(ar, WINDOW_WRITE_ADDR_ADDRESS,
1054 address);
1055}
1056
1057static int ath6kl_sdio_bmi_credits(struct ath6kl *ar)
1058{
1059 u32 addr;
1060 unsigned long timeout;
1061 int ret;
1062
1063 ar->bmi.cmd_credits = 0;
1064
1065 /* Read the counter register to get the command credits */
1066 addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
1067
1068 timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
1069 while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {
1070
1071 /*
1072 * Hit the credit counter with a 4-byte access, the first byte
1073 * read will hit the counter and cause a decrement, while the
1074 * remaining 3 bytes has no effect. The rationale behind this
1075 * is to make all HIF accesses 4-byte aligned.
1076 */
1077 ret = ath6kl_sdio_read_write_sync(ar, addr,
1078 (u8 *)&ar->bmi.cmd_credits, 4,
1079 HIF_RD_SYNC_BYTE_INC);
1080 if (ret) {
1081 ath6kl_err("Unable to decrement the command credit count register: %d\n",
1082 ret);
1083 return ret;
1084 }
1085
1086 /* The counter is only 8 bits.
1087 * Ignore anything in the upper 3 bytes
1088 */
1089 ar->bmi.cmd_credits &= 0xFF;
1090 }
1091
1092 if (!ar->bmi.cmd_credits) {
1093 ath6kl_err("bmi communication timeout\n");
1094 return -ETIMEDOUT;
1095 }
1096
1097 return 0;
1098}
1099
1100static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar)
1101{
1102 unsigned long timeout;
1103 u32 rx_word = 0;
1104 int ret = 0;
1105
1106 timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
1107 while ((time_before(jiffies, timeout)) && !rx_word) {
1108 ret = ath6kl_sdio_read_write_sync(ar,
1109 RX_LOOKAHEAD_VALID_ADDRESS,
1110 (u8 *)&rx_word, sizeof(rx_word),
1111 HIF_RD_SYNC_BYTE_INC);
1112 if (ret) {
1113 ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");
1114 return ret;
1115 }
1116
1117 /* all we really want is one bit */
1118 rx_word &= (1 << ENDPOINT1);
1119 }
1120
1121 if (!rx_word) {
1122 ath6kl_err("bmi_recv_buf FIFO empty\n");
1123 return -EINVAL;
1124 }
1125
1126 return ret;
1127}
1128
1129static int ath6kl_sdio_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
1130{
1131 int ret;
1132 u32 addr;
1133
1134 ret = ath6kl_sdio_bmi_credits(ar);
1135 if (ret)
1136 return ret;
1137
1138 addr = ar->mbox_info.htc_addr;
1139
1140 ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
1141 HIF_WR_SYNC_BYTE_INC);
1142 if (ret)
1143 ath6kl_err("unable to send the bmi data to the device\n");
1144
1145 return ret;
1146}
1147
1148static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
1149{
1150 int ret;
1151 u32 addr;
1152
1153 /*
1154 * During normal bootup, small reads may be required.
1155 * Rather than issue an HIF Read and then wait as the Target
1156 * adds successive bytes to the FIFO, we wait here until
1157 * we know that response data is available.
1158 *
1159 * This allows us to cleanly timeout on an unexpected
1160 * Target failure rather than risk problems at the HIF level.
1161 * In particular, this avoids SDIO timeouts and possibly garbage
1162 * data on some host controllers. And on an interconnect
1163 * such as Compact Flash (as well as some SDIO masters) which
1164 * does not provide any indication on data timeout, it avoids
1165 * a potential hang or garbage response.
1166 *
1167 * Synchronization is more difficult for reads larger than the
1168 * size of the MBOX FIFO (128B), because the Target is unable
1169 * to push the 129th byte of data until AFTER the Host posts an
1170 * HIF Read and removes some FIFO data. So for large reads the
1171 * Host proceeds to post an HIF Read BEFORE all the data is
1172 * actually available to read. Fortunately, large BMI reads do
1173 * not occur in practice -- they're supported for debug/development.
1174 *
1175 * So Host/Target BMI synchronization is divided into these cases:
1176 * CASE 1: length < 4
1177 * Should not happen
1178 *
1179 * CASE 2: 4 <= length <= 128
1180 * Wait for first 4 bytes to be in FIFO
1181 * If CONSERVATIVE_BMI_READ is enabled, also wait for
1182 * a BMI command credit, which indicates that the ENTIRE
1183 * response is available in the the FIFO
1184 *
1185 * CASE 3: length > 128
1186 * Wait for the first 4 bytes to be in FIFO
1187 *
1188 * For most uses, a small timeout should be sufficient and we will
1189 * usually see a response quickly; but there may be some unusual
1190 * (debug) cases of BMI_EXECUTE where we want an larger timeout.
1191 * For now, we use an unbounded busy loop while waiting for
1192 * BMI_EXECUTE.
1193 *
1194 * If BMI_EXECUTE ever needs to support longer-latency execution,
1195 * especially in production, this code needs to be enhanced to sleep
1196 * and yield. Also note that BMI_COMMUNICATION_TIMEOUT is currently
1197 * a function of Host processor speed.
1198 */
1199 if (len >= 4) { /* NB: Currently, always true */
1200 ret = ath6kl_bmi_get_rx_lkahd(ar);
1201 if (ret)
1202 return ret;
1203 }
1204
1205 addr = ar->mbox_info.htc_addr;
1206 ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
1207 HIF_RD_SYNC_BYTE_INC);
1208 if (ret) {
1209 ath6kl_err("Unable to read the bmi data from the device: %d\n",
1210 ret);
1211 return ret;
1212 }
1213
1214 return 0;
1215}
1216
1217static void ath6kl_sdio_stop(struct ath6kl *ar)
1218{
1219 struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
1220 struct bus_request *req, *tmp_req;
1221 void *context;
1222
1223 /* FIXME: make sure that wq is not queued again */
1224
1225 cancel_work_sync(&ar_sdio->wr_async_work);
1226
1227 spin_lock_bh(&ar_sdio->wr_async_lock);
1228
1229 list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq, list) {
1230 list_del(&req->list);
1231
1232 if (req->scat_req) {
1233 /* this is a scatter gather request */
1234 req->scat_req->status = -ECANCELED;
1235 req->scat_req->complete(ar_sdio->ar->htc_target,
1236 req->scat_req);
1237 } else {
1238 context = req->packet;
1239 ath6kl_sdio_free_bus_req(ar_sdio, req);
1240 ath6kl_hif_rw_comp_handler(context, -ECANCELED);
1241 }
1242 }
1243
1244 spin_unlock_bh(&ar_sdio->wr_async_lock);
1245
1246 WARN_ON(get_queue_depth(&ar_sdio->scat_req) != 4);
1247}
1248
1249static const struct ath6kl_hif_ops ath6kl_sdio_ops = {
1250 .read_write_sync = ath6kl_sdio_read_write_sync,
1251 .write_async = ath6kl_sdio_write_async,
1252 .irq_enable = ath6kl_sdio_irq_enable,
1253 .irq_disable = ath6kl_sdio_irq_disable,
1254 .scatter_req_get = ath6kl_sdio_scatter_req_get,
1255 .scatter_req_add = ath6kl_sdio_scatter_req_add,
1256 .enable_scatter = ath6kl_sdio_enable_scatter,
1257 .scat_req_rw = ath6kl_sdio_async_rw_scatter,
1258 .cleanup_scatter = ath6kl_sdio_cleanup_scatter,
1259 .suspend = ath6kl_sdio_suspend,
1260 .resume = ath6kl_sdio_resume,
1261 .diag_read32 = ath6kl_sdio_diag_read32,
1262 .diag_write32 = ath6kl_sdio_diag_write32,
1263 .bmi_read = ath6kl_sdio_bmi_read,
1264 .bmi_write = ath6kl_sdio_bmi_write,
1265 .power_on = ath6kl_sdio_power_on,
1266 .power_off = ath6kl_sdio_power_off,
1267 .stop = ath6kl_sdio_stop,
1268};
1269
1270#ifdef CONFIG_PM_SLEEP
1271
1272/*
1273 * Empty handlers so that mmc subsystem doesn't remove us entirely during
1274 * suspend. We instead follow cfg80211 suspend/resume handlers.
1275 */
1276static int ath6kl_sdio_pm_suspend(struct device *device)
1277{
1278 ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm suspend\n");
1279
1280 return 0;
1281}
1282
1283static int ath6kl_sdio_pm_resume(struct device *device)
1284{
1285 ath6kl_dbg(ATH6KL_DBG_SUSPEND, "sdio pm resume\n");
1286
1287 return 0;
1288}
1289
1290static SIMPLE_DEV_PM_OPS(ath6kl_sdio_pm_ops, ath6kl_sdio_pm_suspend,
1291 ath6kl_sdio_pm_resume);
1292
1293#define ATH6KL_SDIO_PM_OPS (&ath6kl_sdio_pm_ops)
1294
1295#else
1296
1297#define ATH6KL_SDIO_PM_OPS NULL
1298
1299#endif /* CONFIG_PM_SLEEP */
1300
1301static int ath6kl_sdio_probe(struct sdio_func *func,
1302 const struct sdio_device_id *id)
1303{
1304 int ret;
1305 struct ath6kl_sdio *ar_sdio;
1306 struct ath6kl *ar;
1307 int count;
1308
1309 ath6kl_dbg(ATH6KL_DBG_BOOT,
1310 "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
1311 func->num, func->vendor, func->device,
1312 func->max_blksize, func->cur_blksize);
1313
1314 ar_sdio = kzalloc(sizeof(struct ath6kl_sdio), GFP_KERNEL);
1315 if (!ar_sdio)
1316 return -ENOMEM;
1317
1318 ar_sdio->dma_buffer = kzalloc(HIF_DMA_BUFFER_SIZE, GFP_KERNEL);
1319 if (!ar_sdio->dma_buffer) {
1320 ret = -ENOMEM;
1321 goto err_hif;
1322 }
1323
1324 ar_sdio->func = func;
1325 sdio_set_drvdata(func, ar_sdio);
1326
1327 ar_sdio->id = id;
1328 ar_sdio->is_disabled = true;
1329
1330 spin_lock_init(&ar_sdio->lock);
1331 spin_lock_init(&ar_sdio->scat_lock);
1332 spin_lock_init(&ar_sdio->wr_async_lock);
1333 mutex_init(&ar_sdio->dma_buffer_mutex);
1334
1335 INIT_LIST_HEAD(&ar_sdio->scat_req);
1336 INIT_LIST_HEAD(&ar_sdio->bus_req_freeq);
1337 INIT_LIST_HEAD(&ar_sdio->wr_asyncq);
1338
1339 INIT_WORK(&ar_sdio->wr_async_work, ath6kl_sdio_write_async_work);
1340
1341 init_waitqueue_head(&ar_sdio->irq_wq);
1342
1343 for (count = 0; count < BUS_REQUEST_MAX_NUM; count++)
1344 ath6kl_sdio_free_bus_req(ar_sdio, &ar_sdio->bus_req[count]);
1345
1346 ar = ath6kl_core_create(&ar_sdio->func->dev);
1347 if (!ar) {
1348 ath6kl_err("Failed to alloc ath6kl core\n");
1349 ret = -ENOMEM;
1350 goto err_dma;
1351 }
1352
1353 ar_sdio->ar = ar;
1354 ar->hif_type = ATH6KL_HIF_TYPE_SDIO;
1355 ar->hif_priv = ar_sdio;
1356 ar->hif_ops = &ath6kl_sdio_ops;
1357 ar->bmi.max_data_size = 256;
1358
1359 ath6kl_sdio_set_mbox_info(ar);
1360
1361 ret = ath6kl_sdio_config(ar);
1362 if (ret) {
1363 ath6kl_err("Failed to config sdio: %d\n", ret);
1364 goto err_core_alloc;
1365 }
1366
1367 ret = ath6kl_core_init(ar, ATH6KL_HTC_TYPE_MBOX);
1368 if (ret) {
1369 ath6kl_err("Failed to init ath6kl core\n");
1370 goto err_core_alloc;
1371 }
1372
1373 return ret;
1374
1375err_core_alloc:
1376 ath6kl_core_destroy(ar_sdio->ar);
1377err_dma:
1378 kfree(ar_sdio->dma_buffer);
1379err_hif:
1380 kfree(ar_sdio);
1381
1382 return ret;
1383}
1384
1385static void ath6kl_sdio_remove(struct sdio_func *func)
1386{
1387 struct ath6kl_sdio *ar_sdio;
1388
1389 ath6kl_dbg(ATH6KL_DBG_BOOT,
1390 "sdio removed func %d vendor 0x%x device 0x%x\n",
1391 func->num, func->vendor, func->device);
1392
1393 ar_sdio = sdio_get_drvdata(func);
1394
1395 ath6kl_stop_txrx(ar_sdio->ar);
1396 cancel_work_sync(&ar_sdio->wr_async_work);
1397
1398 ath6kl_core_cleanup(ar_sdio->ar);
1399 ath6kl_core_destroy(ar_sdio->ar);
1400
1401 kfree(ar_sdio->dma_buffer);
1402 kfree(ar_sdio);
1403}
1404
1405static const struct sdio_device_id ath6kl_sdio_devices[] = {
1406 {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6003_BASE | 0x0))},
1407 {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6003_BASE | 0x1))},
1408 {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6004_BASE | 0x0))},
1409 {SDIO_DEVICE(MANUFACTURER_CODE, (MANUFACTURER_ID_AR6004_BASE | 0x1))},
1410 {},
1411};
1412
1413MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
1414
1415static struct sdio_driver ath6kl_sdio_driver = {
1416 .name = "ath6kl_sdio",
1417 .id_table = ath6kl_sdio_devices,
1418 .probe = ath6kl_sdio_probe,
1419 .remove = ath6kl_sdio_remove,
1420 .drv.pm = ATH6KL_SDIO_PM_OPS,
1421};
1422
1423static int __init ath6kl_sdio_init(void)
1424{
1425 int ret;
1426
1427 ret = sdio_register_driver(&ath6kl_sdio_driver);
1428 if (ret)
1429 ath6kl_err("sdio driver registration failed: %d\n", ret);
1430
1431 return ret;
1432}
1433
1434static void __exit ath6kl_sdio_exit(void)
1435{
1436 sdio_unregister_driver(&ath6kl_sdio_driver);
1437}
1438
1439module_init(ath6kl_sdio_init);
1440module_exit(ath6kl_sdio_exit);
1441
1442MODULE_AUTHOR("Atheros Communications, Inc.");
1443MODULE_DESCRIPTION("Driver support for Atheros AR600x SDIO devices");
1444MODULE_LICENSE("Dual BSD/GPL");
1445
1446MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_OTP_FILE);
1447MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_FIRMWARE_FILE);
1448MODULE_FIRMWARE(AR6003_HW_2_0_FW_DIR "/" AR6003_HW_2_0_PATCH_FILE);
1449MODULE_FIRMWARE(AR6003_HW_2_0_BOARD_DATA_FILE);
1450MODULE_FIRMWARE(AR6003_HW_2_0_DEFAULT_BOARD_DATA_FILE);
1451MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_OTP_FILE);
1452MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_FIRMWARE_FILE);
1453MODULE_FIRMWARE(AR6003_HW_2_1_1_FW_DIR "/" AR6003_HW_2_1_1_PATCH_FILE);
1454MODULE_FIRMWARE(AR6003_HW_2_1_1_BOARD_DATA_FILE);
1455MODULE_FIRMWARE(AR6003_HW_2_1_1_DEFAULT_BOARD_DATA_FILE);
1456MODULE_FIRMWARE(AR6004_HW_1_0_FW_DIR "/" AR6004_HW_1_0_FIRMWARE_FILE);
1457MODULE_FIRMWARE(AR6004_HW_1_0_BOARD_DATA_FILE);
1458MODULE_FIRMWARE(AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE);
1459MODULE_FIRMWARE(AR6004_HW_1_1_FW_DIR "/" AR6004_HW_1_1_FIRMWARE_FILE);
1460MODULE_FIRMWARE(AR6004_HW_1_1_BOARD_DATA_FILE);
1461MODULE_FIRMWARE(AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE);
1462MODULE_FIRMWARE(AR6004_HW_1_2_FW_DIR "/" AR6004_HW_1_2_FIRMWARE_FILE);
1463MODULE_FIRMWARE(AR6004_HW_1_2_BOARD_DATA_FILE);
1464MODULE_FIRMWARE(AR6004_HW_1_2_DEFAULT_BOARD_DATA_FILE);