Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Freescale PowerQUICC Ethernet Driver -- MIIM bus implementation
4 * Provides Bus interface for MIIM regs
5 *
6 * Author: Andy Fleming <afleming@freescale.com>
7 * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
8 *
9 * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
10 *
11 * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips)
12 */
13
14#include <linux/kernel.h>
15#include <linux/platform_device.h>
16#include <linux/string.h>
17#include <linux/errno.h>
18#include <linux/slab.h>
19#include <linux/delay.h>
20#include <linux/module.h>
21#include <linux/mii.h>
22#include <linux/of.h>
23#include <linux/of_address.h>
24#include <linux/of_mdio.h>
25#include <linux/property.h>
26
27#include <asm/io.h>
28#if IS_ENABLED(CONFIG_UCC_GETH)
29#include <soc/fsl/qe/ucc.h>
30#endif
31
32#include "gianfar.h"
33
34#define MIIMIND_BUSY 0x00000001
35#define MIIMIND_NOTVALID 0x00000004
36#define MIIMCFG_INIT_VALUE 0x00000007
37#define MIIMCFG_RESET 0x80000000
38
39#define MII_READ_COMMAND 0x00000001
40
41struct fsl_pq_mii {
42 u32 miimcfg; /* MII management configuration reg */
43 u32 miimcom; /* MII management command reg */
44 u32 miimadd; /* MII management address reg */
45 u32 miimcon; /* MII management control reg */
46 u32 miimstat; /* MII management status reg */
47 u32 miimind; /* MII management indication reg */
48};
49
50struct fsl_pq_mdio {
51 u8 res1[16];
52 u32 ieventm; /* MDIO Interrupt event register (for etsec2)*/
53 u32 imaskm; /* MDIO Interrupt mask register (for etsec2)*/
54 u8 res2[4];
55 u32 emapm; /* MDIO Event mapping register (for etsec2)*/
56 u8 res3[1280];
57 struct fsl_pq_mii mii;
58 u8 res4[28];
59 u32 utbipar; /* TBI phy address reg (only on UCC) */
60 u8 res5[2728];
61} __packed;
62
63/* Number of microseconds to wait for an MII register to respond */
64#define MII_TIMEOUT 1000
65
66struct fsl_pq_mdio_priv {
67 void __iomem *map;
68 struct fsl_pq_mii __iomem *regs;
69};
70
71/*
72 * Per-device-type data. Each type of device tree node that we support gets
73 * one of these.
74 *
75 * @mii_offset: the offset of the MII registers within the memory map of the
76 * node. Some nodes define only the MII registers, and some define the whole
77 * MAC (which includes the MII registers).
78 *
79 * @get_tbipa: determines the address of the TBIPA register
80 *
81 * @ucc_configure: a special function for extra QE configuration
82 */
83struct fsl_pq_mdio_data {
84 unsigned int mii_offset; /* offset of the MII registers */
85 uint32_t __iomem * (*get_tbipa)(void __iomem *p);
86 void (*ucc_configure)(phys_addr_t start, phys_addr_t end);
87};
88
89/*
90 * Write value to the PHY at mii_id at register regnum, on the bus attached
91 * to the local interface, which may be different from the generic mdio bus
92 * (tied to a single interface), waiting until the write is done before
93 * returning. This is helpful in programming interfaces like the TBI which
94 * control interfaces like onchip SERDES and are always tied to the local
95 * mdio pins, which may not be the same as system mdio bus, used for
96 * controlling the external PHYs, for example.
97 */
98static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
99 u16 value)
100{
101 struct fsl_pq_mdio_priv *priv = bus->priv;
102 struct fsl_pq_mii __iomem *regs = priv->regs;
103 unsigned int timeout;
104
105 /* Set the PHY address and the register address we want to write */
106 iowrite32be((mii_id << 8) | regnum, ®s->miimadd);
107
108 /* Write out the value we want */
109 iowrite32be(value, ®s->miimcon);
110
111 /* Wait for the transaction to finish */
112 timeout = MII_TIMEOUT;
113 while ((ioread32be(®s->miimind) & MIIMIND_BUSY) && timeout) {
114 cpu_relax();
115 timeout--;
116 }
117
118 return timeout ? 0 : -ETIMEDOUT;
119}
120
121/*
122 * Read the bus for PHY at addr mii_id, register regnum, and return the value.
123 * Clears miimcom first.
124 *
125 * All PHY operation done on the bus attached to the local interface, which
126 * may be different from the generic mdio bus. This is helpful in programming
127 * interfaces like the TBI which, in turn, control interfaces like on-chip
128 * SERDES and are always tied to the local mdio pins, which may not be the
129 * same as system mdio bus, used for controlling the external PHYs, for eg.
130 */
131static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
132{
133 struct fsl_pq_mdio_priv *priv = bus->priv;
134 struct fsl_pq_mii __iomem *regs = priv->regs;
135 unsigned int timeout;
136 u16 value;
137
138 /* Set the PHY address and the register address we want to read */
139 iowrite32be((mii_id << 8) | regnum, ®s->miimadd);
140
141 /* Clear miimcom, and then initiate a read */
142 iowrite32be(0, ®s->miimcom);
143 iowrite32be(MII_READ_COMMAND, ®s->miimcom);
144
145 /* Wait for the transaction to finish, normally less than 100us */
146 timeout = MII_TIMEOUT;
147 while ((ioread32be(®s->miimind) &
148 (MIIMIND_NOTVALID | MIIMIND_BUSY)) && timeout) {
149 cpu_relax();
150 timeout--;
151 }
152
153 if (!timeout)
154 return -ETIMEDOUT;
155
156 /* Grab the value of the register from miimstat */
157 value = ioread32be(®s->miimstat);
158
159 dev_dbg(&bus->dev, "read %04x from address %x/%x\n", value, mii_id, regnum);
160 return value;
161}
162
163/* Reset the MIIM registers, and wait for the bus to free */
164static int fsl_pq_mdio_reset(struct mii_bus *bus)
165{
166 struct fsl_pq_mdio_priv *priv = bus->priv;
167 struct fsl_pq_mii __iomem *regs = priv->regs;
168 unsigned int timeout;
169
170 mutex_lock(&bus->mdio_lock);
171
172 /* Reset the management interface */
173 iowrite32be(MIIMCFG_RESET, ®s->miimcfg);
174
175 /* Setup the MII Mgmt clock speed */
176 iowrite32be(MIIMCFG_INIT_VALUE, ®s->miimcfg);
177
178 /* Wait until the bus is free */
179 timeout = MII_TIMEOUT;
180 while ((ioread32be(®s->miimind) & MIIMIND_BUSY) && timeout) {
181 cpu_relax();
182 timeout--;
183 }
184
185 mutex_unlock(&bus->mdio_lock);
186
187 if (!timeout) {
188 dev_err(&bus->dev, "timeout waiting for MII bus\n");
189 return -EBUSY;
190 }
191
192 return 0;
193}
194
195#if IS_ENABLED(CONFIG_GIANFAR)
196/*
197 * Return the TBIPA address, starting from the address
198 * of the mapped GFAR MDIO registers (struct gfar)
199 * This is mildly evil, but so is our hardware for doing this.
200 * Also, we have to cast back to struct gfar because of
201 * definition weirdness done in gianfar.h.
202 */
203static uint32_t __iomem *get_gfar_tbipa_from_mdio(void __iomem *p)
204{
205 struct gfar __iomem *enet_regs = p;
206
207 return &enet_regs->tbipa;
208}
209
210/*
211 * Return the TBIPA address, starting from the address
212 * of the mapped GFAR MII registers (gfar_mii_regs[] within struct gfar)
213 */
214static uint32_t __iomem *get_gfar_tbipa_from_mii(void __iomem *p)
215{
216 return get_gfar_tbipa_from_mdio(container_of(p, struct gfar, gfar_mii_regs));
217}
218
219/*
220 * Return the TBIPAR address for an eTSEC2 node
221 */
222static uint32_t __iomem *get_etsec_tbipa(void __iomem *p)
223{
224 return p;
225}
226#endif
227
228#if IS_ENABLED(CONFIG_UCC_GETH)
229/*
230 * Return the TBIPAR address for a QE MDIO node, starting from the address
231 * of the mapped MII registers (struct fsl_pq_mii)
232 */
233static uint32_t __iomem *get_ucc_tbipa(void __iomem *p)
234{
235 struct fsl_pq_mdio __iomem *mdio = container_of(p, struct fsl_pq_mdio, mii);
236
237 return &mdio->utbipar;
238}
239
240/*
241 * Find the UCC node that controls the given MDIO node
242 *
243 * For some reason, the QE MDIO nodes are not children of the UCC devices
244 * that control them. Therefore, we need to scan all UCC nodes looking for
245 * the one that encompases the given MDIO node. We do this by comparing
246 * physical addresses. The 'start' and 'end' addresses of the MDIO node are
247 * passed, and the correct UCC node will cover the entire address range.
248 *
249 * This assumes that there is only one QE MDIO node in the entire device tree.
250 */
251static void ucc_configure(phys_addr_t start, phys_addr_t end)
252{
253 static bool found_mii_master;
254 struct device_node *np = NULL;
255
256 if (found_mii_master)
257 return;
258
259 for_each_compatible_node(np, NULL, "ucc_geth") {
260 struct resource res;
261 const uint32_t *iprop;
262 uint32_t id;
263 int ret;
264
265 ret = of_address_to_resource(np, 0, &res);
266 if (ret < 0) {
267 pr_debug("fsl-pq-mdio: no address range in node %pOF\n",
268 np);
269 continue;
270 }
271
272 /* if our mdio regs fall within this UCC regs range */
273 if ((start < res.start) || (end > res.end))
274 continue;
275
276 iprop = of_get_property(np, "cell-index", NULL);
277 if (!iprop) {
278 iprop = of_get_property(np, "device-id", NULL);
279 if (!iprop) {
280 pr_debug("fsl-pq-mdio: no UCC ID in node %pOF\n",
281 np);
282 continue;
283 }
284 }
285
286 id = be32_to_cpup(iprop);
287
288 /*
289 * cell-index and device-id for QE nodes are
290 * numbered from 1, not 0.
291 */
292 if (ucc_set_qe_mux_mii_mng(id - 1) < 0) {
293 pr_debug("fsl-pq-mdio: invalid UCC ID in node %pOF\n",
294 np);
295 continue;
296 }
297
298 pr_debug("fsl-pq-mdio: setting node UCC%u to MII master\n", id);
299 found_mii_master = true;
300 }
301}
302
303#endif
304
305static const struct of_device_id fsl_pq_mdio_match[] = {
306#if IS_ENABLED(CONFIG_GIANFAR)
307 {
308 .compatible = "fsl,gianfar-tbi",
309 .data = &(struct fsl_pq_mdio_data) {
310 .mii_offset = 0,
311 .get_tbipa = get_gfar_tbipa_from_mii,
312 },
313 },
314 {
315 .compatible = "fsl,gianfar-mdio",
316 .data = &(struct fsl_pq_mdio_data) {
317 .mii_offset = 0,
318 .get_tbipa = get_gfar_tbipa_from_mii,
319 },
320 },
321 {
322 .type = "mdio",
323 .compatible = "gianfar",
324 .data = &(struct fsl_pq_mdio_data) {
325 .mii_offset = offsetof(struct fsl_pq_mdio, mii),
326 .get_tbipa = get_gfar_tbipa_from_mdio,
327 },
328 },
329 {
330 .compatible = "fsl,etsec2-tbi",
331 .data = &(struct fsl_pq_mdio_data) {
332 .mii_offset = offsetof(struct fsl_pq_mdio, mii),
333 .get_tbipa = get_etsec_tbipa,
334 },
335 },
336 {
337 .compatible = "fsl,etsec2-mdio",
338 .data = &(struct fsl_pq_mdio_data) {
339 .mii_offset = offsetof(struct fsl_pq_mdio, mii),
340 .get_tbipa = get_etsec_tbipa,
341 },
342 },
343#endif
344#if IS_ENABLED(CONFIG_UCC_GETH)
345 {
346 .compatible = "fsl,ucc-mdio",
347 .data = &(struct fsl_pq_mdio_data) {
348 .mii_offset = 0,
349 .get_tbipa = get_ucc_tbipa,
350 .ucc_configure = ucc_configure,
351 },
352 },
353 {
354 /* Legacy UCC MDIO node */
355 .type = "mdio",
356 .compatible = "ucc_geth_phy",
357 .data = &(struct fsl_pq_mdio_data) {
358 .mii_offset = 0,
359 .get_tbipa = get_ucc_tbipa,
360 .ucc_configure = ucc_configure,
361 },
362 },
363#endif
364 /* No Kconfig option for Fman support yet */
365 {
366 .compatible = "fsl,fman-mdio",
367 .data = &(struct fsl_pq_mdio_data) {
368 .mii_offset = 0,
369 /* Fman TBI operations are handled elsewhere */
370 },
371 },
372
373 {},
374};
375MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match);
376
377static void set_tbipa(const u32 tbipa_val, struct platform_device *pdev,
378 uint32_t __iomem * (*get_tbipa)(void __iomem *),
379 void __iomem *reg_map, struct resource *reg_res)
380{
381 struct device_node *np = pdev->dev.of_node;
382 uint32_t __iomem *tbipa;
383 bool tbipa_mapped;
384
385 tbipa = of_iomap(np, 1);
386 if (tbipa) {
387 tbipa_mapped = true;
388 } else {
389 tbipa_mapped = false;
390 tbipa = (*get_tbipa)(reg_map);
391
392 /*
393 * Add consistency check to make sure TBI is contained within
394 * the mapped range (not because we would get a segfault,
395 * rather to catch bugs in computing TBI address). Print error
396 * message but continue anyway.
397 */
398 if ((void *)tbipa > reg_map + resource_size(reg_res) - 4)
399 dev_err(&pdev->dev, "invalid register map (should be at least 0x%04zx to contain TBI address)\n",
400 ((void *)tbipa - reg_map) + 4);
401 }
402
403 iowrite32be(be32_to_cpu(tbipa_val), tbipa);
404
405 if (tbipa_mapped)
406 iounmap(tbipa);
407}
408
409static int fsl_pq_mdio_probe(struct platform_device *pdev)
410{
411 const struct fsl_pq_mdio_data *data;
412 struct device_node *np = pdev->dev.of_node;
413 struct resource res;
414 struct device_node *tbi;
415 struct fsl_pq_mdio_priv *priv;
416 struct mii_bus *new_bus;
417 int err;
418
419 data = device_get_match_data(&pdev->dev);
420 if (!data) {
421 dev_err(&pdev->dev, "Failed to match device\n");
422 return -ENODEV;
423 }
424
425 new_bus = mdiobus_alloc_size(sizeof(*priv));
426 if (!new_bus)
427 return -ENOMEM;
428
429 priv = new_bus->priv;
430 new_bus->name = "Freescale PowerQUICC MII Bus";
431 new_bus->read = &fsl_pq_mdio_read;
432 new_bus->write = &fsl_pq_mdio_write;
433 new_bus->reset = &fsl_pq_mdio_reset;
434
435 err = of_address_to_resource(np, 0, &res);
436 if (err < 0) {
437 dev_err(&pdev->dev, "could not obtain address information\n");
438 goto error;
439 }
440
441 snprintf(new_bus->id, MII_BUS_ID_SIZE, "%pOFn@%llx", np,
442 (unsigned long long)res.start);
443
444 priv->map = of_iomap(np, 0);
445 if (!priv->map) {
446 err = -ENOMEM;
447 goto error;
448 }
449
450 /*
451 * Some device tree nodes represent only the MII registers, and
452 * others represent the MAC and MII registers. The 'mii_offset' field
453 * contains the offset of the MII registers inside the mapped register
454 * space.
455 */
456 if (data->mii_offset > resource_size(&res)) {
457 dev_err(&pdev->dev, "invalid register map\n");
458 err = -EINVAL;
459 goto error;
460 }
461 priv->regs = priv->map + data->mii_offset;
462
463 new_bus->parent = &pdev->dev;
464 platform_set_drvdata(pdev, new_bus);
465
466 if (data->get_tbipa) {
467 for_each_child_of_node(np, tbi) {
468 if (of_node_is_type(tbi, "tbi-phy")) {
469 dev_dbg(&pdev->dev, "found TBI PHY node %pOFP\n",
470 tbi);
471 break;
472 }
473 }
474
475 if (tbi) {
476 const u32 *prop = of_get_property(tbi, "reg", NULL);
477 if (!prop) {
478 dev_err(&pdev->dev,
479 "missing 'reg' property in node %pOF\n",
480 tbi);
481 err = -EBUSY;
482 goto error;
483 }
484 set_tbipa(*prop, pdev,
485 data->get_tbipa, priv->map, &res);
486 }
487 }
488
489 if (data->ucc_configure)
490 data->ucc_configure(res.start, res.end);
491
492 err = of_mdiobus_register(new_bus, np);
493 if (err) {
494 dev_err(&pdev->dev, "cannot register %s as MDIO bus\n",
495 new_bus->name);
496 goto error;
497 }
498
499 return 0;
500
501error:
502 if (priv->map)
503 iounmap(priv->map);
504
505 kfree(new_bus);
506
507 return err;
508}
509
510
511static void fsl_pq_mdio_remove(struct platform_device *pdev)
512{
513 struct device *device = &pdev->dev;
514 struct mii_bus *bus = dev_get_drvdata(device);
515 struct fsl_pq_mdio_priv *priv = bus->priv;
516
517 mdiobus_unregister(bus);
518
519 iounmap(priv->map);
520 mdiobus_free(bus);
521}
522
523static struct platform_driver fsl_pq_mdio_driver = {
524 .driver = {
525 .name = "fsl-pq_mdio",
526 .of_match_table = fsl_pq_mdio_match,
527 },
528 .probe = fsl_pq_mdio_probe,
529 .remove_new = fsl_pq_mdio_remove,
530};
531
532module_platform_driver(fsl_pq_mdio_driver);
533
534MODULE_DESCRIPTION("Freescale PQ MDIO helpers");
535MODULE_LICENSE("GPL");
1/*
2 * Freescale PowerQUICC Ethernet Driver -- MIIM bus implementation
3 * Provides Bus interface for MIIM regs
4 *
5 * Author: Andy Fleming <afleming@freescale.com>
6 * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
7 *
8 * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
9 *
10 * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips)
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 *
17 */
18
19#include <linux/kernel.h>
20#include <linux/string.h>
21#include <linux/errno.h>
22#include <linux/unistd.h>
23#include <linux/slab.h>
24#include <linux/interrupt.h>
25#include <linux/init.h>
26#include <linux/delay.h>
27#include <linux/netdevice.h>
28#include <linux/etherdevice.h>
29#include <linux/skbuff.h>
30#include <linux/spinlock.h>
31#include <linux/mm.h>
32#include <linux/module.h>
33#include <linux/platform_device.h>
34#include <linux/crc32.h>
35#include <linux/mii.h>
36#include <linux/phy.h>
37#include <linux/of.h>
38#include <linux/of_address.h>
39#include <linux/of_mdio.h>
40#include <linux/of_platform.h>
41
42#include <asm/io.h>
43#include <asm/irq.h>
44#include <asm/uaccess.h>
45#include <asm/ucc.h>
46
47#include "gianfar.h"
48#include "fsl_pq_mdio.h"
49
50struct fsl_pq_mdio_priv {
51 void __iomem *map;
52 struct fsl_pq_mdio __iomem *regs;
53};
54
55/*
56 * Write value to the PHY at mii_id at register regnum,
57 * on the bus attached to the local interface, which may be different from the
58 * generic mdio bus (tied to a single interface), waiting until the write is
59 * done before returning. This is helpful in programming interfaces like
60 * the TBI which control interfaces like onchip SERDES and are always tied to
61 * the local mdio pins, which may not be the same as system mdio bus, used for
62 * controlling the external PHYs, for example.
63 */
64int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
65 int regnum, u16 value)
66{
67 /* Set the PHY address and the register address we want to write */
68 out_be32(®s->miimadd, (mii_id << 8) | regnum);
69
70 /* Write out the value we want */
71 out_be32(®s->miimcon, value);
72
73 /* Wait for the transaction to finish */
74 while (in_be32(®s->miimind) & MIIMIND_BUSY)
75 cpu_relax();
76
77 return 0;
78}
79
80/*
81 * Read the bus for PHY at addr mii_id, register regnum, and
82 * return the value. Clears miimcom first. All PHY operation
83 * done on the bus attached to the local interface,
84 * which may be different from the generic mdio bus
85 * This is helpful in programming interfaces like
86 * the TBI which, in turn, control interfaces like onchip SERDES
87 * and are always tied to the local mdio pins, which may not be the
88 * same as system mdio bus, used for controlling the external PHYs, for eg.
89 */
90int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs,
91 int mii_id, int regnum)
92{
93 u16 value;
94
95 /* Set the PHY address and the register address we want to read */
96 out_be32(®s->miimadd, (mii_id << 8) | regnum);
97
98 /* Clear miimcom, and then initiate a read */
99 out_be32(®s->miimcom, 0);
100 out_be32(®s->miimcom, MII_READ_COMMAND);
101
102 /* Wait for the transaction to finish */
103 while (in_be32(®s->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
104 cpu_relax();
105
106 /* Grab the value of the register from miimstat */
107 value = in_be32(®s->miimstat);
108
109 return value;
110}
111
112static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus)
113{
114 struct fsl_pq_mdio_priv *priv = bus->priv;
115
116 return priv->regs;
117}
118
119/*
120 * Write value to the PHY at mii_id at register regnum,
121 * on the bus, waiting until the write is done before returning.
122 */
123int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
124{
125 struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
126
127 /* Write to the local MII regs */
128 return fsl_pq_local_mdio_write(regs, mii_id, regnum, value);
129}
130
131/*
132 * Read the bus for PHY at addr mii_id, register regnum, and
133 * return the value. Clears miimcom first.
134 */
135int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
136{
137 struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
138
139 /* Read the local MII regs */
140 return fsl_pq_local_mdio_read(regs, mii_id, regnum);
141}
142
143/* Reset the MIIM registers, and wait for the bus to free */
144static int fsl_pq_mdio_reset(struct mii_bus *bus)
145{
146 struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
147 int timeout = PHY_INIT_TIMEOUT;
148
149 mutex_lock(&bus->mdio_lock);
150
151 /* Reset the management interface */
152 out_be32(®s->miimcfg, MIIMCFG_RESET);
153
154 /* Setup the MII Mgmt clock speed */
155 out_be32(®s->miimcfg, MIIMCFG_INIT_VALUE);
156
157 /* Wait until the bus is free */
158 while ((in_be32(®s->miimind) & MIIMIND_BUSY) && timeout--)
159 cpu_relax();
160
161 mutex_unlock(&bus->mdio_lock);
162
163 if (timeout < 0) {
164 printk(KERN_ERR "%s: The MII Bus is stuck!\n",
165 bus->name);
166 return -EBUSY;
167 }
168
169 return 0;
170}
171
172void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
173{
174 const u32 *addr;
175 u64 taddr = OF_BAD_ADDR;
176
177 addr = of_get_address(np, 0, NULL, NULL);
178 if (addr)
179 taddr = of_translate_address(np, addr);
180
181 snprintf(name, MII_BUS_ID_SIZE, "%s@%llx", np->name,
182 (unsigned long long)taddr);
183}
184EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name);
185
186
187static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
188{
189#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
190 struct gfar __iomem *enet_regs;
191
192 /*
193 * This is mildly evil, but so is our hardware for doing this.
194 * Also, we have to cast back to struct gfar because of
195 * definition weirdness done in gianfar.h.
196 */
197 if(of_device_is_compatible(np, "fsl,gianfar-mdio") ||
198 of_device_is_compatible(np, "fsl,gianfar-tbi") ||
199 of_device_is_compatible(np, "gianfar")) {
200 enet_regs = (struct gfar __iomem *)regs;
201 return &enet_regs->tbipa;
202 } else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
203 of_device_is_compatible(np, "fsl,etsec2-tbi")) {
204 return of_iomap(np, 1);
205 }
206#endif
207 return NULL;
208}
209
210
211static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
212{
213#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
214 struct device_node *np = NULL;
215 int err = 0;
216
217 for_each_compatible_node(np, NULL, "ucc_geth") {
218 struct resource tempres;
219
220 err = of_address_to_resource(np, 0, &tempres);
221 if (err)
222 continue;
223
224 /* if our mdio regs fall within this UCC regs range */
225 if ((start >= tempres.start) && (end <= tempres.end)) {
226 /* Find the id of the UCC */
227 const u32 *id;
228
229 id = of_get_property(np, "cell-index", NULL);
230 if (!id) {
231 id = of_get_property(np, "device-id", NULL);
232 if (!id)
233 continue;
234 }
235
236 *ucc_id = *id;
237
238 return 0;
239 }
240 }
241
242 if (err)
243 return err;
244 else
245 return -EINVAL;
246#else
247 return -ENODEV;
248#endif
249}
250
251static int fsl_pq_mdio_probe(struct platform_device *ofdev)
252{
253 struct device_node *np = ofdev->dev.of_node;
254 struct device_node *tbi;
255 struct fsl_pq_mdio_priv *priv;
256 struct fsl_pq_mdio __iomem *regs = NULL;
257 void __iomem *map;
258 u32 __iomem *tbipa;
259 struct mii_bus *new_bus;
260 int tbiaddr = -1;
261 const u32 *addrp;
262 u64 addr = 0, size = 0;
263 int err;
264
265 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
266 if (!priv)
267 return -ENOMEM;
268
269 new_bus = mdiobus_alloc();
270 if (!new_bus) {
271 err = -ENOMEM;
272 goto err_free_priv;
273 }
274
275 new_bus->name = "Freescale PowerQUICC MII Bus",
276 new_bus->read = &fsl_pq_mdio_read,
277 new_bus->write = &fsl_pq_mdio_write,
278 new_bus->reset = &fsl_pq_mdio_reset,
279 new_bus->priv = priv;
280 fsl_pq_mdio_bus_name(new_bus->id, np);
281
282 addrp = of_get_address(np, 0, &size, NULL);
283 if (!addrp) {
284 err = -EINVAL;
285 goto err_free_bus;
286 }
287
288 /* Set the PHY base address */
289 addr = of_translate_address(np, addrp);
290 if (addr == OF_BAD_ADDR) {
291 err = -EINVAL;
292 goto err_free_bus;
293 }
294
295 map = ioremap(addr, size);
296 if (!map) {
297 err = -ENOMEM;
298 goto err_free_bus;
299 }
300 priv->map = map;
301
302 if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
303 of_device_is_compatible(np, "fsl,gianfar-tbi") ||
304 of_device_is_compatible(np, "fsl,ucc-mdio") ||
305 of_device_is_compatible(np, "ucc_geth_phy"))
306 map -= offsetof(struct fsl_pq_mdio, miimcfg);
307 regs = map;
308 priv->regs = regs;
309
310 new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
311
312 if (NULL == new_bus->irq) {
313 err = -ENOMEM;
314 goto err_unmap_regs;
315 }
316
317 new_bus->parent = &ofdev->dev;
318 dev_set_drvdata(&ofdev->dev, new_bus);
319
320 if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
321 of_device_is_compatible(np, "fsl,gianfar-tbi") ||
322 of_device_is_compatible(np, "fsl,etsec2-mdio") ||
323 of_device_is_compatible(np, "fsl,etsec2-tbi") ||
324 of_device_is_compatible(np, "gianfar")) {
325 tbipa = get_gfar_tbipa(regs, np);
326 if (!tbipa) {
327 err = -EINVAL;
328 goto err_free_irqs;
329 }
330 } else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
331 of_device_is_compatible(np, "ucc_geth_phy")) {
332 u32 id;
333 static u32 mii_mng_master;
334
335 tbipa = ®s->utbipar;
336
337 if ((err = get_ucc_id_for_range(addr, addr + size, &id)))
338 goto err_free_irqs;
339
340 if (!mii_mng_master) {
341 mii_mng_master = id;
342 ucc_set_qe_mux_mii_mng(id - 1);
343 }
344 } else {
345 err = -ENODEV;
346 goto err_free_irqs;
347 }
348
349 for_each_child_of_node(np, tbi) {
350 if (!strncmp(tbi->type, "tbi-phy", 8))
351 break;
352 }
353
354 if (tbi) {
355 const u32 *prop = of_get_property(tbi, "reg", NULL);
356
357 if (prop)
358 tbiaddr = *prop;
359
360 if (tbiaddr == -1) {
361 err = -EBUSY;
362 goto err_free_irqs;
363 } else {
364 out_be32(tbipa, tbiaddr);
365 }
366 }
367
368 err = of_mdiobus_register(new_bus, np);
369 if (err) {
370 printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
371 new_bus->name);
372 goto err_free_irqs;
373 }
374
375 return 0;
376
377err_free_irqs:
378 kfree(new_bus->irq);
379err_unmap_regs:
380 iounmap(priv->map);
381err_free_bus:
382 kfree(new_bus);
383err_free_priv:
384 kfree(priv);
385 return err;
386}
387
388
389static int fsl_pq_mdio_remove(struct platform_device *ofdev)
390{
391 struct device *device = &ofdev->dev;
392 struct mii_bus *bus = dev_get_drvdata(device);
393 struct fsl_pq_mdio_priv *priv = bus->priv;
394
395 mdiobus_unregister(bus);
396
397 dev_set_drvdata(device, NULL);
398
399 iounmap(priv->map);
400 bus->priv = NULL;
401 mdiobus_free(bus);
402 kfree(priv);
403
404 return 0;
405}
406
407static struct of_device_id fsl_pq_mdio_match[] = {
408 {
409 .type = "mdio",
410 .compatible = "ucc_geth_phy",
411 },
412 {
413 .type = "mdio",
414 .compatible = "gianfar",
415 },
416 {
417 .compatible = "fsl,ucc-mdio",
418 },
419 {
420 .compatible = "fsl,gianfar-tbi",
421 },
422 {
423 .compatible = "fsl,gianfar-mdio",
424 },
425 {
426 .compatible = "fsl,etsec2-tbi",
427 },
428 {
429 .compatible = "fsl,etsec2-mdio",
430 },
431 {},
432};
433MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match);
434
435static struct platform_driver fsl_pq_mdio_driver = {
436 .driver = {
437 .name = "fsl-pq_mdio",
438 .owner = THIS_MODULE,
439 .of_match_table = fsl_pq_mdio_match,
440 },
441 .probe = fsl_pq_mdio_probe,
442 .remove = fsl_pq_mdio_remove,
443};
444
445module_platform_driver(fsl_pq_mdio_driver);
446
447MODULE_LICENSE("GPL");