Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Common prep/pmac/chrp boot and setup code.
4 */
5
6#include <linux/module.h>
7#include <linux/string.h>
8#include <linux/sched.h>
9#include <linux/init.h>
10#include <linux/kernel.h>
11#include <linux/reboot.h>
12#include <linux/delay.h>
13#include <linux/initrd.h>
14#include <linux/tty.h>
15#include <linux/seq_file.h>
16#include <linux/root_dev.h>
17#include <linux/cpu.h>
18#include <linux/console.h>
19#include <linux/memblock.h>
20#include <linux/export.h>
21#include <linux/nvram.h>
22#include <linux/pgtable.h>
23#include <linux/of_fdt.h>
24#include <linux/irq.h>
25
26#include <asm/io.h>
27#include <asm/processor.h>
28#include <asm/setup.h>
29#include <asm/smp.h>
30#include <asm/elf.h>
31#include <asm/cputable.h>
32#include <asm/bootx.h>
33#include <asm/btext.h>
34#include <asm/machdep.h>
35#include <linux/uaccess.h>
36#include <asm/pmac_feature.h>
37#include <asm/sections.h>
38#include <asm/nvram.h>
39#include <asm/xmon.h>
40#include <asm/time.h>
41#include <asm/serial.h>
42#include <asm/udbg.h>
43#include <asm/code-patching.h>
44#include <asm/cpu_has_feature.h>
45#include <asm/asm-prototypes.h>
46#include <asm/kdump.h>
47#include <asm/feature-fixups.h>
48#include <asm/early_ioremap.h>
49
50#include "setup.h"
51
52#define DBG(fmt...)
53
54extern void bootx_init(unsigned long r4, unsigned long phys);
55
56int boot_cpuid_phys;
57EXPORT_SYMBOL_GPL(boot_cpuid_phys);
58
59int smp_hw_index[NR_CPUS];
60EXPORT_SYMBOL(smp_hw_index);
61
62unsigned int DMA_MODE_READ;
63unsigned int DMA_MODE_WRITE;
64
65EXPORT_SYMBOL(DMA_MODE_READ);
66EXPORT_SYMBOL(DMA_MODE_WRITE);
67
68/*
69 * This is run before start_kernel(), the kernel has been relocated
70 * and we are running with enough of the MMU enabled to have our
71 * proper kernel virtual addresses
72 *
73 * We do the initial parsing of the flat device-tree and prepares
74 * for the MMU to be fully initialized.
75 */
76notrace void __init machine_init(u64 dt_ptr)
77{
78 u32 *addr = (u32 *)patch_site_addr(&patch__memset_nocache);
79 ppc_inst_t insn;
80
81 /* Configure static keys first, now that we're relocated. */
82 setup_feature_keys();
83
84 early_ioremap_init();
85
86 /* Enable early debugging if any specified (see udbg.h) */
87 udbg_early_init();
88
89 patch_instruction_site(&patch__memcpy_nocache, ppc_inst(PPC_RAW_NOP()));
90
91 create_cond_branch(&insn, addr, branch_target(addr), 0x820000);
92 patch_instruction(addr, insn); /* replace b by bne cr0 */
93
94 /* Do some early initialization based on the flat device tree */
95 early_init_devtree(__va(dt_ptr));
96
97 early_init_mmu();
98
99 setup_kdump_trampoline();
100}
101
102/* Checks "l2cr=xxxx" command-line option */
103static int __init ppc_setup_l2cr(char *str)
104{
105 if (cpu_has_feature(CPU_FTR_L2CR)) {
106 unsigned long val = simple_strtoul(str, NULL, 0);
107 printk(KERN_INFO "l2cr set to %lx\n", val);
108 _set_L2CR(0); /* force invalidate by disable cache */
109 _set_L2CR(val); /* and enable it */
110 }
111 return 1;
112}
113__setup("l2cr=", ppc_setup_l2cr);
114
115/* Checks "l3cr=xxxx" command-line option */
116static int __init ppc_setup_l3cr(char *str)
117{
118 if (cpu_has_feature(CPU_FTR_L3CR)) {
119 unsigned long val = simple_strtoul(str, NULL, 0);
120 printk(KERN_INFO "l3cr set to %lx\n", val);
121 _set_L3CR(val); /* and enable it */
122 }
123 return 1;
124}
125__setup("l3cr=", ppc_setup_l3cr);
126
127static int __init ppc_init(void)
128{
129 /* clear the progress line */
130 if (ppc_md.progress)
131 ppc_md.progress(" ", 0xffff);
132
133 /* call platform init */
134 if (ppc_md.init != NULL) {
135 ppc_md.init();
136 }
137 return 0;
138}
139arch_initcall(ppc_init);
140
141static void *__init alloc_stack(void)
142{
143 void *ptr = memblock_alloc(THREAD_SIZE, THREAD_ALIGN);
144
145 if (!ptr)
146 panic("cannot allocate %d bytes for stack at %pS\n",
147 THREAD_SIZE, (void *)_RET_IP_);
148
149 return ptr;
150}
151
152void __init irqstack_early_init(void)
153{
154 unsigned int i;
155
156 if (IS_ENABLED(CONFIG_VMAP_STACK))
157 return;
158
159 /* interrupt stacks must be in lowmem, we get that for free on ppc32
160 * as the memblock is limited to lowmem by default */
161 for_each_possible_cpu(i) {
162 softirq_ctx[i] = alloc_stack();
163 hardirq_ctx[i] = alloc_stack();
164 }
165}
166
167#ifdef CONFIG_VMAP_STACK
168void *emergency_ctx[NR_CPUS] __ro_after_init = {[0] = &init_stack};
169
170void __init emergency_stack_init(void)
171{
172 unsigned int i;
173
174 for_each_possible_cpu(i)
175 emergency_ctx[i] = alloc_stack();
176}
177#endif
178
179#ifdef CONFIG_BOOKE_OR_40x
180void __init exc_lvl_early_init(void)
181{
182 unsigned int i, hw_cpu;
183
184 /* interrupt stacks must be in lowmem, we get that for free on ppc32
185 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
186 for_each_possible_cpu(i) {
187#ifdef CONFIG_SMP
188 hw_cpu = get_hard_smp_processor_id(i);
189#else
190 hw_cpu = 0;
191#endif
192
193 critirq_ctx[hw_cpu] = alloc_stack();
194#ifdef CONFIG_BOOKE
195 dbgirq_ctx[hw_cpu] = alloc_stack();
196 mcheckirq_ctx[hw_cpu] = alloc_stack();
197#endif
198 }
199}
200#endif
201
202void __init setup_power_save(void)
203{
204#ifdef CONFIG_PPC_BOOK3S_32
205 if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
206 cpu_has_feature(CPU_FTR_CAN_NAP))
207 ppc_md.power_save = ppc6xx_idle;
208#endif
209
210#ifdef CONFIG_PPC_E500
211 if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
212 cpu_has_feature(CPU_FTR_CAN_NAP))
213 ppc_md.power_save = e500_idle;
214#endif
215}
216
217__init void initialize_cache_info(void)
218{
219 /*
220 * Set cache line size based on type of cpu as a default.
221 * Systems with OF can look in the properties on the cpu node(s)
222 * for a possibly more accurate value.
223 */
224 dcache_bsize = cur_cpu_spec->dcache_bsize;
225 icache_bsize = cur_cpu_spec->icache_bsize;
226}
1/*
2 * Common prep/pmac/chrp boot and setup code.
3 */
4
5#include <linux/module.h>
6#include <linux/string.h>
7#include <linux/sched.h>
8#include <linux/init.h>
9#include <linux/kernel.h>
10#include <linux/reboot.h>
11#include <linux/delay.h>
12#include <linux/initrd.h>
13#include <linux/tty.h>
14#include <linux/bootmem.h>
15#include <linux/seq_file.h>
16#include <linux/root_dev.h>
17#include <linux/cpu.h>
18#include <linux/console.h>
19#include <linux/memblock.h>
20
21#include <asm/io.h>
22#include <asm/prom.h>
23#include <asm/processor.h>
24#include <asm/pgtable.h>
25#include <asm/setup.h>
26#include <asm/smp.h>
27#include <asm/elf.h>
28#include <asm/cputable.h>
29#include <asm/bootx.h>
30#include <asm/btext.h>
31#include <asm/machdep.h>
32#include <asm/uaccess.h>
33#include <asm/pmac_feature.h>
34#include <asm/sections.h>
35#include <asm/nvram.h>
36#include <asm/xmon.h>
37#include <asm/time.h>
38#include <asm/serial.h>
39#include <asm/udbg.h>
40#include <asm/mmu_context.h>
41
42#include "setup.h"
43
44#define DBG(fmt...)
45
46extern void bootx_init(unsigned long r4, unsigned long phys);
47
48int boot_cpuid = -1;
49EXPORT_SYMBOL_GPL(boot_cpuid);
50int boot_cpuid_phys;
51EXPORT_SYMBOL_GPL(boot_cpuid_phys);
52
53int smp_hw_index[NR_CPUS];
54
55unsigned long ISA_DMA_THRESHOLD;
56unsigned int DMA_MODE_READ;
57unsigned int DMA_MODE_WRITE;
58
59#ifdef CONFIG_VGA_CONSOLE
60unsigned long vgacon_remap_base;
61EXPORT_SYMBOL(vgacon_remap_base);
62#endif
63
64/*
65 * These are used in binfmt_elf.c to put aux entries on the stack
66 * for each elf executable being started.
67 */
68int dcache_bsize;
69int icache_bsize;
70int ucache_bsize;
71
72/*
73 * We're called here very early in the boot. We determine the machine
74 * type and call the appropriate low-level setup functions.
75 * -- Cort <cort@fsmlabs.com>
76 *
77 * Note that the kernel may be running at an address which is different
78 * from the address that it was linked at, so we must use RELOC/PTRRELOC
79 * to access static data (including strings). -- paulus
80 */
81notrace unsigned long __init early_init(unsigned long dt_ptr)
82{
83 unsigned long offset = reloc_offset();
84 struct cpu_spec *spec;
85
86 /* First zero the BSS -- use memset_io, some platforms don't have
87 * caches on yet */
88 memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
89 __bss_stop - __bss_start);
90
91 /*
92 * Identify the CPU type and fix up code sections
93 * that depend on which cpu we have.
94 */
95 spec = identify_cpu(offset, mfspr(SPRN_PVR));
96
97 do_feature_fixups(spec->cpu_features,
98 PTRRELOC(&__start___ftr_fixup),
99 PTRRELOC(&__stop___ftr_fixup));
100
101 do_feature_fixups(spec->mmu_features,
102 PTRRELOC(&__start___mmu_ftr_fixup),
103 PTRRELOC(&__stop___mmu_ftr_fixup));
104
105 do_lwsync_fixups(spec->cpu_features,
106 PTRRELOC(&__start___lwsync_fixup),
107 PTRRELOC(&__stop___lwsync_fixup));
108
109 do_final_fixups();
110
111 return KERNELBASE + offset;
112}
113
114
115/*
116 * Find out what kind of machine we're on and save any data we need
117 * from the early boot process (devtree is copied on pmac by prom_init()).
118 * This is called very early on the boot process, after a minimal
119 * MMU environment has been set up but before MMU_init is called.
120 */
121notrace void __init machine_init(u64 dt_ptr)
122{
123 lockdep_init();
124
125 /* Enable early debugging if any specified (see udbg.h) */
126 udbg_early_init();
127
128 /* Do some early initialization based on the flat device tree */
129 early_init_devtree(__va(dt_ptr));
130
131 early_init_mmu();
132
133 probe_machine();
134
135 setup_kdump_trampoline();
136
137#ifdef CONFIG_6xx
138 if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
139 cpu_has_feature(CPU_FTR_CAN_NAP))
140 ppc_md.power_save = ppc6xx_idle;
141#endif
142
143#ifdef CONFIG_E500
144 if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
145 cpu_has_feature(CPU_FTR_CAN_NAP))
146 ppc_md.power_save = e500_idle;
147#endif
148 if (ppc_md.progress)
149 ppc_md.progress("id mach(): done", 0x200);
150}
151
152#ifdef CONFIG_BOOKE_WDT
153extern u32 booke_wdt_enabled;
154extern u32 booke_wdt_period;
155
156/* Checks wdt=x and wdt_period=xx command-line option */
157notrace int __init early_parse_wdt(char *p)
158{
159 if (p && strncmp(p, "0", 1) != 0)
160 booke_wdt_enabled = 1;
161
162 return 0;
163}
164early_param("wdt", early_parse_wdt);
165
166int __init early_parse_wdt_period (char *p)
167{
168 if (p)
169 booke_wdt_period = simple_strtoul(p, NULL, 0);
170
171 return 0;
172}
173early_param("wdt_period", early_parse_wdt_period);
174#endif /* CONFIG_BOOKE_WDT */
175
176/* Checks "l2cr=xxxx" command-line option */
177int __init ppc_setup_l2cr(char *str)
178{
179 if (cpu_has_feature(CPU_FTR_L2CR)) {
180 unsigned long val = simple_strtoul(str, NULL, 0);
181 printk(KERN_INFO "l2cr set to %lx\n", val);
182 _set_L2CR(0); /* force invalidate by disable cache */
183 _set_L2CR(val); /* and enable it */
184 }
185 return 1;
186}
187__setup("l2cr=", ppc_setup_l2cr);
188
189/* Checks "l3cr=xxxx" command-line option */
190int __init ppc_setup_l3cr(char *str)
191{
192 if (cpu_has_feature(CPU_FTR_L3CR)) {
193 unsigned long val = simple_strtoul(str, NULL, 0);
194 printk(KERN_INFO "l3cr set to %lx\n", val);
195 _set_L3CR(val); /* and enable it */
196 }
197 return 1;
198}
199__setup("l3cr=", ppc_setup_l3cr);
200
201#ifdef CONFIG_GENERIC_NVRAM
202
203/* Generic nvram hooks used by drivers/char/gen_nvram.c */
204unsigned char nvram_read_byte(int addr)
205{
206 if (ppc_md.nvram_read_val)
207 return ppc_md.nvram_read_val(addr);
208 return 0xff;
209}
210EXPORT_SYMBOL(nvram_read_byte);
211
212void nvram_write_byte(unsigned char val, int addr)
213{
214 if (ppc_md.nvram_write_val)
215 ppc_md.nvram_write_val(addr, val);
216}
217EXPORT_SYMBOL(nvram_write_byte);
218
219ssize_t nvram_get_size(void)
220{
221 if (ppc_md.nvram_size)
222 return ppc_md.nvram_size();
223 return -1;
224}
225EXPORT_SYMBOL(nvram_get_size);
226
227void nvram_sync(void)
228{
229 if (ppc_md.nvram_sync)
230 ppc_md.nvram_sync();
231}
232EXPORT_SYMBOL(nvram_sync);
233
234#endif /* CONFIG_NVRAM */
235
236int __init ppc_init(void)
237{
238 /* clear the progress line */
239 if (ppc_md.progress)
240 ppc_md.progress(" ", 0xffff);
241
242 /* call platform init */
243 if (ppc_md.init != NULL) {
244 ppc_md.init();
245 }
246 return 0;
247}
248
249arch_initcall(ppc_init);
250
251static void __init irqstack_early_init(void)
252{
253 unsigned int i;
254
255 /* interrupt stacks must be in lowmem, we get that for free on ppc32
256 * as the memblock is limited to lowmem by default */
257 for_each_possible_cpu(i) {
258 softirq_ctx[i] = (struct thread_info *)
259 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
260 hardirq_ctx[i] = (struct thread_info *)
261 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
262 }
263}
264
265#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
266static void __init exc_lvl_early_init(void)
267{
268 unsigned int i, hw_cpu;
269
270 /* interrupt stacks must be in lowmem, we get that for free on ppc32
271 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
272 for_each_possible_cpu(i) {
273 hw_cpu = get_hard_smp_processor_id(i);
274 critirq_ctx[hw_cpu] = (struct thread_info *)
275 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
276#ifdef CONFIG_BOOKE
277 dbgirq_ctx[hw_cpu] = (struct thread_info *)
278 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
279 mcheckirq_ctx[hw_cpu] = (struct thread_info *)
280 __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
281#endif
282 }
283}
284#else
285#define exc_lvl_early_init()
286#endif
287
288/* Warning, IO base is not yet inited */
289void __init setup_arch(char **cmdline_p)
290{
291 *cmdline_p = cmd_line;
292
293 /* so udelay does something sensible, assume <= 1000 bogomips */
294 loops_per_jiffy = 500000000 / HZ;
295
296 unflatten_device_tree();
297 check_for_initrd();
298
299 if (ppc_md.init_early)
300 ppc_md.init_early();
301
302 find_legacy_serial_ports();
303
304 smp_setup_cpu_maps();
305
306 /* Register early console */
307 register_early_udbg_console();
308
309 xmon_setup();
310
311 /*
312 * Set cache line size based on type of cpu as a default.
313 * Systems with OF can look in the properties on the cpu node(s)
314 * for a possibly more accurate value.
315 */
316 dcache_bsize = cur_cpu_spec->dcache_bsize;
317 icache_bsize = cur_cpu_spec->icache_bsize;
318 ucache_bsize = 0;
319 if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE))
320 ucache_bsize = icache_bsize = dcache_bsize;
321
322 /* reboot on panic */
323 panic_timeout = 180;
324
325 if (ppc_md.panic)
326 setup_panic();
327
328 init_mm.start_code = (unsigned long)_stext;
329 init_mm.end_code = (unsigned long) _etext;
330 init_mm.end_data = (unsigned long) _edata;
331 init_mm.brk = klimit;
332
333 exc_lvl_early_init();
334
335 irqstack_early_init();
336
337 /* set up the bootmem stuff with available memory */
338 do_init_bootmem();
339 if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
340
341#ifdef CONFIG_DUMMY_CONSOLE
342 conswitchp = &dummy_con;
343#endif
344
345 if (ppc_md.setup_arch)
346 ppc_md.setup_arch();
347 if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
348
349 paging_init();
350
351 /* Initialize the MMU context management stuff */
352 mmu_context_init();
353
354}