Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 help
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 help
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Nokia mobile phones
70 - Novatel Wireless GPS receivers
71 - Siemens USB/MPI adapter.
72 - ViVOtech ViVOpay USB device.
73 - Infineon Modem Flashloader USB interface
74 - ZIO Motherboard USB serial interface
75
76 To compile this driver as a module, choose M here: the module
77 will be called usb-serial-simple.
78
79config USB_SERIAL_AIRCABLE
80 tristate "USB AIRcable Bluetooth Dongle Driver"
81 help
82 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
83
84 To compile this driver as a module, choose M here: the module
85 will be called aircable.
86
87config USB_SERIAL_ARK3116
88 tristate "USB ARK Micro 3116 USB Serial Driver"
89 help
90 Say Y here if you want to use a ARK Micro 3116 USB to Serial
91 device.
92
93 To compile this driver as a module, choose M here: the
94 module will be called ark3116
95
96config USB_SERIAL_BELKIN
97 tristate "USB Belkin and Peracom Single Port Serial Driver"
98 help
99 Say Y here if you want to use a Belkin USB Serial single port
100 adaptor (F5U103 is one of the model numbers) or the Peracom single
101 port USB to serial adapter.
102
103 To compile this driver as a module, choose M here: the
104 module will be called belkin_sa.
105
106config USB_SERIAL_CH341
107 tristate "USB Winchiphead CH341 Single Port Serial Driver"
108 help
109 Say Y here if you want to use a Winchiphead CH341 single port
110 USB to serial adapter.
111
112 To compile this driver as a module, choose M here: the
113 module will be called ch341.
114
115config USB_SERIAL_WHITEHEAT
116 tristate "USB ConnectTech WhiteHEAT Serial Driver"
117 select USB_EZUSB_FX2
118 help
119 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
120 USB to serial converter device.
121
122 To compile this driver as a module, choose M here: the
123 module will be called whiteheat.
124
125config USB_SERIAL_DIGI_ACCELEPORT
126 tristate "USB Digi International AccelePort USB Serial Driver"
127 help
128 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
129 2 port (plus parallel port) and 4 port USB serial converters. The
130 parallel port on the USB 2 appears as a third serial port on Linux.
131 The Digi Acceleport USB 8 is not yet supported by this driver.
132
133 To compile this driver as a module, choose M here: the
134 module will be called digi_acceleport.
135
136config USB_SERIAL_CP210X
137 tristate "USB CP210x family of UART Bridge Controllers"
138 help
139 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
140 to RS232 converters.
141
142 To compile this driver as a module, choose M here: the
143 module will be called cp210x.
144
145config USB_SERIAL_CYPRESS_M8
146 tristate "USB Cypress M8 USB Serial Driver"
147 help
148 Say Y here if you want to use a device that contains the Cypress
149 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
150
151 Attempted SMP support... send bug reports!
152
153 Supported microcontrollers in the CY4601 family are:
154 CY7C63741 CY7C63742 CY7C63743 CY7C64013
155
156 To compile this driver as a module, choose M here: the
157 module will be called cypress_m8.
158
159config USB_SERIAL_EMPEG
160 tristate "USB Empeg empeg-car Mark I/II Driver"
161 help
162 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
163 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
164 device node. See <file:Documentation/usb/usb-serial.rst> for more
165 tidbits of information.
166
167 To compile this driver as a module, choose M here: the
168 module will be called empeg.
169
170config USB_SERIAL_FTDI_SIO
171 tristate "USB FTDI Single Port Serial Driver"
172 help
173 Say Y here if you want to use a FTDI SIO single port USB to serial
174 converter device. The implementation I have is called the USC-1000.
175 This driver has also been tested with the 245 and 232 devices.
176
177 See <http://ftdi-usb-sio.sourceforge.net/> for more
178 information on this driver and the device.
179
180 To compile this driver as a module, choose M here: the
181 module will be called ftdi_sio.
182
183config USB_SERIAL_VISOR
184 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
185 help
186 Say Y here if you want to connect to your HandSpring Visor, Palm
187 m500 or m505 through its USB docking station. See
188 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
189 driver.
190
191 To compile this driver as a module, choose M here: the
192 module will be called visor.
193
194config USB_SERIAL_IPAQ
195 tristate "USB PocketPC PDA Driver"
196 help
197 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
198 or any other PDA running Windows CE 3.0 or PocketPC 2002
199 using a USB cradle/cable. For information on using the driver,
200 read <file:Documentation/usb/usb-serial.rst>.
201
202 To compile this driver as a module, choose M here: the
203 module will be called ipaq.
204
205config USB_SERIAL_IR
206 tristate "USB IR Dongle Serial Driver"
207 help
208 Say Y here if you want to enable simple serial support for USB IrDA
209 devices. This is useful if you do not want to use the full IrDA
210 stack.
211
212 To compile this driver as a module, choose M here: the
213 module will be called ir-usb.
214
215config USB_SERIAL_EDGEPORT
216 tristate "USB Inside Out Edgeport Serial Driver"
217 help
218 Say Y here if you want to use any of the following devices from
219 Inside Out Networks (Digi):
220 Edgeport/4
221 Rapidport/4
222 Edgeport/4t
223 Edgeport/2
224 Edgeport/4i
225 Edgeport/2i
226 Edgeport/421
227 Edgeport/21
228 Edgeport/8
229 Edgeport/8 Dual
230 Edgeport/2D8
231 Edgeport/4D8
232 Edgeport/8i
233 Edgeport/2 DIN
234 Edgeport/4 DIN
235 Edgeport/16 Dual
236
237 To compile this driver as a module, choose M here: the
238 module will be called io_edgeport.
239
240config USB_SERIAL_EDGEPORT_TI
241 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
242 help
243 Say Y here if you want to use any of the devices from Inside Out
244 Networks (Digi) that are not supported by the io_edgeport driver.
245 This includes the Edgeport/1 device.
246
247 To compile this driver as a module, choose M here: the
248 module will be called io_ti.
249
250config USB_SERIAL_F81232
251 tristate "USB Fintek F81232 Single Port Serial Driver"
252 help
253 Say Y here if you want to use the Fintek F81232 single
254 port usb to serial adapter.
255
256 To compile this driver as a module, choose M here: the
257 module will be called f81232.
258
259config USB_SERIAL_F8153X
260 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
261 help
262 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
263 USB to serial adapter.
264
265 To compile this driver as a module, choose M here: the
266 module will be called f81534.
267
268
269config USB_SERIAL_GARMIN
270 tristate "USB Garmin GPS driver"
271 help
272 Say Y here if you want to connect to your Garmin GPS.
273 Should work with most Garmin GPS devices which have a native USB port.
274
275 See <http://sourceforge.net/projects/garmin-gps> for the latest
276 version of the driver.
277
278 To compile this driver as a module, choose M here: the
279 module will be called garmin_gps.
280
281config USB_SERIAL_IPW
282 tristate "USB IPWireless (3G UMTS TDD) Driver"
283 select USB_SERIAL_WWAN
284 help
285 Say Y here if you want to use a IPWireless USB modem such as
286 the ones supplied by Axity3G/Sentech South Africa.
287
288 To compile this driver as a module, choose M here: the
289 module will be called ipw.
290
291config USB_SERIAL_IUU
292 tristate "USB Infinity USB Unlimited Phoenix Driver"
293 help
294 Say Y here if you want to use a IUU in phoenix mode and get
295 an extra ttyUSBx device. More information available on
296 http://eczema.ecze.com/iuu_phoenix.html
297
298 To compile this driver as a module, choose M here: the
299 module will be called iuu_phoenix.o
300
301config USB_SERIAL_KEYSPAN_PDA
302 tristate "USB Keyspan PDA / Xircom Single Port Serial Driver"
303 select USB_EZUSB_FX2
304 help
305 Say Y here if you want to use a Keyspan PDA, Xircom or Entrega single
306 port USB to serial converter device. This driver makes use of
307 firmware developed from scratch by Brian Warner.
308
309 To compile this driver as a module, choose M here: the
310 module will be called keyspan_pda.
311
312config USB_SERIAL_KEYSPAN
313 tristate "USB Keyspan USA-xxx Serial Driver"
314 select USB_EZUSB_FX2
315 help
316 Say Y here if you want to use Keyspan USB to serial converter
317 devices. This driver makes use of Keyspan's official firmware
318 and was developed with their support. You must also include
319 firmware to support your particular device(s).
320
321 See <http://blemings.org/hugh/keyspan.html> for more information.
322
323 To compile this driver as a module, choose M here: the
324 module will be called keyspan.
325
326config USB_SERIAL_KLSI
327 tristate "USB KL5KUSB105 (Palmconnect) Driver"
328 help
329 Say Y here if you want to use a KL5KUSB105 - based single port
330 serial adapter. The most widely known -- and currently the only
331 tested -- device in this category is the PalmConnect USB Serial
332 adapter sold by Palm Inc. for use with their Palm III and Palm V
333 series PDAs.
334
335 Please read <file:Documentation/usb/usb-serial.rst> for more
336 information.
337
338 To compile this driver as a module, choose M here: the
339 module will be called kl5kusb105.
340
341config USB_SERIAL_KOBIL_SCT
342 tristate "USB KOBIL chipcard reader"
343 help
344 Say Y here if you want to use one of the following KOBIL USB chipcard
345 readers:
346
347 - USB TWIN
348 - KAAN Standard Plus
349 - KAAN SIM
350 - SecOVID Reader Plus
351 - B1 Professional
352 - KAAN Professional
353
354 Note that you need a current CT-API.
355 To compile this driver as a module, choose M here: the
356 module will be called kobil_sct.
357
358config USB_SERIAL_MCT_U232
359 tristate "USB MCT Single Port Serial Driver"
360 help
361 Say Y here if you want to use a USB Serial single port adapter from
362 Magic Control Technology Corp. (U232 is one of the model numbers).
363
364 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
365 BAY, Belkin F5U109, and Belkin F5U409 devices.
366
367 To compile this driver as a module, choose M here: the
368 module will be called mct_u232.
369
370config USB_SERIAL_METRO
371 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
372 help
373 Say Y here if you want to use a USB POS Metrologic barcode scanner.
374
375 To compile this driver as a module, choose M here: the
376 module will be called metro-usb.
377
378config USB_SERIAL_MOS7720
379 tristate "USB Moschip 7720 Serial Driver"
380 help
381 Say Y here if you want to use USB Serial single and double
382 port adapters from Moschip Semiconductor Tech.
383
384 To compile this driver as a module, choose M here: the
385 module will be called mos7720.
386
387config USB_SERIAL_MOS7715_PARPORT
388 bool "Support for parallel port on the Moschip 7715"
389 depends on USB_SERIAL_MOS7720
390 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
391 select PARPORT_NOT_PC
392 help
393 Say Y if you have a Moschip 7715 device and would like to use
394 the parallel port it provides. The port will register with
395 the parport subsystem as a low-level driver.
396
397config USB_SERIAL_MOS7840
398 tristate "USB Moschip 7840/7820 USB Serial Driver"
399 help
400 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
401 Dual-Serial port device from MosChip Semiconductor.
402
403 The MCS7840 and MCS7820 have been developed to connect a wide range
404 of standard serial devices to a USB host. The MCS7840 has a USB
405 device controller connected to four (4) individual UARTs while the
406 MCS7820 controller connects to two (2) individual UARTs.
407
408 To compile this driver as a module, choose M here: the
409 module will be called mos7840. If unsure, choose N.
410
411config USB_SERIAL_MXUPORT
412 tristate "USB Moxa UPORT Serial Driver"
413 help
414 Say Y here if you want to use a MOXA UPort Serial hub.
415
416 This driver supports:
417
418 [2 Port]
419 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
420 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
421 Isolation
422
423 [4 Port]
424 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
425 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
426 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
427 Isolation
428
429 [8 Port]
430 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
431 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
432
433 [16 Port]
434 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
435 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
436
437 To compile this driver as a module, choose M here: the
438 module will be called mxuport.
439
440config USB_SERIAL_NAVMAN
441 tristate "USB Navman GPS device"
442 help
443 To compile this driver as a module, choose M here: the
444 module will be called navman.
445
446config USB_SERIAL_PL2303
447 tristate "USB Prolific 2303 Single Port Serial Driver"
448 help
449 Say Y here if you want to use the PL2303 USB Serial single port
450 adapter from Prolific.
451
452 To compile this driver as a module, choose M here: the
453 module will be called pl2303.
454
455config USB_SERIAL_OTI6858
456 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
457 help
458 Say Y here if you want to use the OTi-6858 single port USB to serial
459 converter device.
460
461 To compile this driver as a module, choose M here: the
462 module will be called oti6858.
463
464config USB_SERIAL_QCAUX
465 tristate "USB Qualcomm Auxiliary Serial Port Driver"
466 help
467 Say Y here if you want to use the auxiliary serial ports provided
468 by many modems based on Qualcomm chipsets. These ports often use
469 a proprietary protocol called DM and cannot be used for AT- or
470 PPP-based communication.
471
472 To compile this driver as a module, choose M here: the
473 module will be called qcaux. If unsure, choose N.
474
475config USB_SERIAL_QUALCOMM
476 tristate "USB Qualcomm Serial modem"
477 select USB_SERIAL_WWAN
478 help
479 Say Y here if you have a Qualcomm USB modem device. These are
480 usually wireless cellular modems.
481
482 To compile this driver as a module, choose M here: the
483 module will be called qcserial.
484
485config USB_SERIAL_SPCP8X5
486 tristate "USB SPCP8x5 USB To Serial Driver"
487 help
488 Say Y here if you want to use the spcp8x5 converter chip. This is
489 commonly found in some Z-Wave USB devices.
490
491 To compile this driver as a module, choose M here: the
492 module will be called spcp8x5.
493
494config USB_SERIAL_SAFE
495 tristate "USB Safe Serial (Encapsulated) Driver"
496
497config USB_SERIAL_SAFE_PADDED
498 bool "USB Secure Encapsulated Driver - Padded"
499 depends on USB_SERIAL_SAFE
500
501config USB_SERIAL_SIERRAWIRELESS
502 tristate "USB Sierra Wireless Driver"
503 help
504 Say M here if you want to use Sierra Wireless devices.
505
506 Many devices have a feature known as TRU-Install. For those devices
507 to work properly, the USB Storage Sierra feature must be enabled.
508
509 To compile this driver as a module, choose M here: the
510 module will be called sierra.
511
512config USB_SERIAL_SYMBOL
513 tristate "USB Symbol Barcode driver (serial mode)"
514 help
515 Say Y here if you want to use a Symbol USB Barcode device
516 in serial emulation mode.
517
518 To compile this driver as a module, choose M here: the
519 module will be called symbolserial.
520
521config USB_SERIAL_TI
522 tristate "USB TI 3410/5052 Serial Driver"
523 help
524 Say Y here if you want to use the TI USB 3410 or 5052
525 serial devices.
526
527 To compile this driver as a module, choose M here: the
528 module will be called ti_usb_3410_5052.
529
530config USB_SERIAL_CYBERJACK
531 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
532 help
533 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
534 reader. This is an interface to ISO 7816 compatible contact-based
535 chipcards, e.g. GSM SIMs.
536
537 To compile this driver as a module, choose M here: the
538 module will be called cyberjack.
539
540 If unsure, say N.
541
542config USB_SERIAL_WWAN
543 tristate
544
545config USB_SERIAL_OPTION
546 tristate "USB driver for GSM and CDMA modems"
547 select USB_SERIAL_WWAN
548 help
549 Say Y here if you have a GSM or CDMA modem that's connected to USB.
550
551 This driver also supports several PCMCIA cards which have a
552 built-in OHCI-USB adapter and an internally-connected GSM modem.
553 The USB bus on these cards is not accessible externally.
554
555 Supported devices include (some of?) those made by:
556 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
557
558 To compile this driver as a module, choose M here: the
559 module will be called option.
560
561 If this driver doesn't recognize your device,
562 it might be accessible via the FTDI_SIO driver.
563
564config USB_SERIAL_OMNINET
565 tristate "USB ZyXEL omni.net LCD Plus Driver"
566 help
567 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
568
569 To compile this driver as a module, choose M here: the
570 module will be called omninet.
571
572config USB_SERIAL_OPTICON
573 tristate "USB Opticon Barcode driver (serial mode)"
574 help
575 Say Y here if you want to use a Opticon USB Barcode device
576 in serial emulation mode.
577
578 To compile this driver as a module, choose M here: the
579 module will be called opticon.
580
581config USB_SERIAL_XSENS_MT
582 tristate "Xsens motion tracker serial interface driver"
583 help
584 Say Y here if you want to use Xsens motion trackers.
585
586 This driver supports the new generation of motion trackers
587 by Xsens. Older devices can be accessed using the FTDI_SIO
588 driver.
589
590 To compile this driver as a module, choose M here: the
591 module will be called xsens_mt.
592
593config USB_SERIAL_WISHBONE
594 tristate "USB-Wishbone adapter interface driver"
595 help
596 Say Y here if you want to use a USB attached Wishbone bus.
597
598 Wishbone is an open hardware SoC bus commonly used in FPGA
599 designs. Bus access can be serialized using the Etherbone
600 protocol <http://www.ohwr.org/projects/etherbone-core>.
601
602 This driver is intended to be used with devices which attach
603 their internal Wishbone bus to a USB serial interface using
604 the Etherbone protocol. A userspace library is required to
605 speak the protocol made available by this driver as ttyUSBx.
606
607 To compile this driver as a module, choose M here: the
608 module will be called wishbone-serial.
609
610config USB_SERIAL_SSU100
611 tristate "USB Quatech SSU-100 Single Port Serial Driver"
612 help
613 Say Y here if you want to use the Quatech SSU-100 single
614 port usb to serial adapter.
615
616 To compile this driver as a module, choose M here: the
617 module will be called ssu100.
618
619config USB_SERIAL_QT2
620 tristate "USB Quatech Serial Driver for USB 2 devices"
621 help
622 Say Y here if you want to use the Quatech USB 2
623 serial adapters.
624
625 To compile this driver as a module, choose M here: the
626 module will be called quatech-serial.
627
628config USB_SERIAL_UPD78F0730
629 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
630 help
631 Say Y here if you want to use the Renesas uPD78F0730
632 serial driver.
633
634 To compile this driver as a module, choose M here: the
635 module will be called upd78f0730.
636
637config USB_SERIAL_XR
638 tristate "USB MaxLinear/Exar USB to Serial driver"
639 help
640 Say Y here if you want to use MaxLinear/Exar USB to Serial converter
641 devices.
642
643 To compile this driver as a module, choose M here: the
644 module will be called xr_serial.
645
646config USB_SERIAL_DEBUG
647 tristate "USB Debugging Device"
648 help
649 Say Y here if you have a USB debugging device used to receive
650 debugging data from another machine. The most common of these
651 devices is the NetChip TurboCONNECT device.
652
653 To compile this driver as a module, choose M here: the
654 module will be called usb-debug.
655
656endif # USB_SERIAL
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on TTY
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_SERIAL_GENERIC
46 bool "USB Generic Serial Driver"
47 help
48 Say Y here if you want to use the generic USB serial driver. Please
49 read <file:Documentation/usb/usb-serial.txt> for more information on
50 using this driver. It is recommended that the "USB Serial converter
51 support" be compiled as a module for this driver to be used
52 properly.
53
54config USB_SERIAL_SIMPLE
55 tristate "USB Serial Simple Driver"
56 help
57 Say Y here to use the USB serial "simple" driver. This driver
58 handles a wide range of very simple devices, all in one
59 driver. Specifically, it supports:
60 - Suunto ANT+ USB device.
61 - Fundamental Software dongle.
62 - HP4x calculators
63 - a number of Motorola phones
64 - Siemens USB/MPI adapter.
65 - ViVOtech ViVOpay USB device.
66 - Infineon Modem Flashloader USB interface
67 - ZIO Motherboard USB serial interface
68
69 To compile this driver as a module, choose M here: the module
70 will be called usb-serial-simple.
71
72config USB_SERIAL_AIRCABLE
73 tristate "USB AIRcable Bluetooth Dongle Driver"
74 help
75 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
76
77 To compile this driver as a module, choose M here: the module
78 will be called aircable.
79
80config USB_SERIAL_ARK3116
81 tristate "USB ARK Micro 3116 USB Serial Driver"
82 help
83 Say Y here if you want to use a ARK Micro 3116 USB to Serial
84 device.
85
86 To compile this driver as a module, choose M here: the
87 module will be called ark3116
88
89config USB_SERIAL_BELKIN
90 tristate "USB Belkin and Peracom Single Port Serial Driver"
91 help
92 Say Y here if you want to use a Belkin USB Serial single port
93 adaptor (F5U103 is one of the model numbers) or the Peracom single
94 port USB to serial adapter.
95
96 To compile this driver as a module, choose M here: the
97 module will be called belkin_sa.
98
99config USB_SERIAL_CH341
100 tristate "USB Winchiphead CH341 Single Port Serial Driver"
101 help
102 Say Y here if you want to use a Winchiphead CH341 single port
103 USB to serial adapter.
104
105 To compile this driver as a module, choose M here: the
106 module will be called ch341.
107
108config USB_SERIAL_WHITEHEAT
109 tristate "USB ConnectTech WhiteHEAT Serial Driver"
110 select USB_EZUSB_FX2
111 help
112 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
113 USB to serial converter device.
114
115 To compile this driver as a module, choose M here: the
116 module will be called whiteheat.
117
118config USB_SERIAL_DIGI_ACCELEPORT
119 tristate "USB Digi International AccelePort USB Serial Driver"
120 ---help---
121 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
122 2 port (plus parallel port) and 4 port USB serial converters. The
123 parallel port on the USB 2 appears as a third serial port on Linux.
124 The Digi Acceleport USB 8 is not yet supported by this driver.
125
126 This driver works under SMP with the usb-uhci driver. It does not
127 work under SMP with the uhci driver.
128
129 To compile this driver as a module, choose M here: the
130 module will be called digi_acceleport.
131
132config USB_SERIAL_CP210X
133 tristate "USB CP210x family of UART Bridge Controllers"
134 help
135 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
136 to RS232 converters.
137
138 To compile this driver as a module, choose M here: the
139 module will be called cp210x.
140
141config USB_SERIAL_CYPRESS_M8
142 tristate "USB Cypress M8 USB Serial Driver"
143 help
144 Say Y here if you want to use a device that contains the Cypress
145 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
146
147 Attempted SMP support... send bug reports!
148
149 Supported microcontrollers in the CY4601 family are:
150 CY7C63741 CY7C63742 CY7C63743 CY7C64013
151
152 To compile this driver as a module, choose M here: the
153 module will be called cypress_m8.
154
155config USB_SERIAL_EMPEG
156 tristate "USB Empeg empeg-car Mark I/II Driver"
157 help
158 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
159 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
160 device node. See <file:Documentation/usb/usb-serial.txt> for more
161 tidbits of information.
162
163 To compile this driver as a module, choose M here: the
164 module will be called empeg.
165
166config USB_SERIAL_FTDI_SIO
167 tristate "USB FTDI Single Port Serial Driver"
168 ---help---
169 Say Y here if you want to use a FTDI SIO single port USB to serial
170 converter device. The implementation I have is called the USC-1000.
171 This driver has also be tested with the 245 and 232 devices.
172
173 See <http://ftdi-usb-sio.sourceforge.net/> for more
174 information on this driver and the device.
175
176 To compile this driver as a module, choose M here: the
177 module will be called ftdi_sio.
178
179config USB_SERIAL_VISOR
180 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
181 help
182 Say Y here if you want to connect to your HandSpring Visor, Palm
183 m500 or m505 through its USB docking station. See
184 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
185 driver.
186
187 To compile this driver as a module, choose M here: the
188 module will be called visor.
189
190config USB_SERIAL_IPAQ
191 tristate "USB PocketPC PDA Driver"
192 help
193 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
194 or any other PDA running Windows CE 3.0 or PocketPC 2002
195 using a USB cradle/cable. For information on using the driver,
196 read <file:Documentation/usb/usb-serial.txt>.
197
198 To compile this driver as a module, choose M here: the
199 module will be called ipaq.
200
201config USB_SERIAL_IR
202 tristate "USB IR Dongle Serial Driver"
203 help
204 Say Y here if you want to enable simple serial support for USB IrDA
205 devices. This is useful if you do not want to use the full IrDA
206 stack.
207
208 To compile this driver as a module, choose M here: the
209 module will be called ir-usb.
210
211config USB_SERIAL_EDGEPORT
212 tristate "USB Inside Out Edgeport Serial Driver"
213 ---help---
214 Say Y here if you want to use any of the following devices from
215 Inside Out Networks (Digi):
216 Edgeport/4
217 Rapidport/4
218 Edgeport/4t
219 Edgeport/2
220 Edgeport/4i
221 Edgeport/2i
222 Edgeport/421
223 Edgeport/21
224 Edgeport/8
225 Edgeport/8 Dual
226 Edgeport/2D8
227 Edgeport/4D8
228 Edgeport/8i
229 Edgeport/2 DIN
230 Edgeport/4 DIN
231 Edgeport/16 Dual
232
233 To compile this driver as a module, choose M here: the
234 module will be called io_edgeport.
235
236config USB_SERIAL_EDGEPORT_TI
237 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
238 help
239 Say Y here if you want to use any of the devices from Inside Out
240 Networks (Digi) that are not supported by the io_edgeport driver.
241 This includes the Edgeport/1 device.
242
243 To compile this driver as a module, choose M here: the
244 module will be called io_ti.
245
246config USB_SERIAL_F81232
247 tristate "USB Fintek F81232 Single Port Serial Driver"
248 help
249 Say Y here if you want to use the Fintek F81232 single
250 port usb to serial adapter.
251
252 To compile this driver as a module, choose M here: the
253 module will be called f81232.
254
255config USB_SERIAL_GARMIN
256 tristate "USB Garmin GPS driver"
257 help
258 Say Y here if you want to connect to your Garmin GPS.
259 Should work with most Garmin GPS devices which have a native USB port.
260
261 See <http://sourceforge.net/projects/garmin-gps> for the latest
262 version of the driver.
263
264 To compile this driver as a module, choose M here: the
265 module will be called garmin_gps.
266
267config USB_SERIAL_IPW
268 tristate "USB IPWireless (3G UMTS TDD) Driver"
269 select USB_SERIAL_WWAN
270 help
271 Say Y here if you want to use a IPWireless USB modem such as
272 the ones supplied by Axity3G/Sentech South Africa.
273
274 To compile this driver as a module, choose M here: the
275 module will be called ipw.
276
277config USB_SERIAL_IUU
278 tristate "USB Infinity USB Unlimited Phoenix Driver"
279 help
280 Say Y here if you want to use a IUU in phoenix mode and get
281 an extra ttyUSBx device. More information available on
282 http://eczema.ecze.com/iuu_phoenix.html
283
284 To compile this driver as a module, choose M here: the
285 module will be called iuu_phoenix.o
286
287config USB_SERIAL_KEYSPAN_PDA
288 tristate "USB Keyspan PDA Single Port Serial Driver"
289 select USB_EZUSB_FX2
290 help
291 Say Y here if you want to use a Keyspan PDA single port USB to
292 serial converter device. This driver makes use of firmware
293 developed from scratch by Brian Warner.
294
295 To compile this driver as a module, choose M here: the
296 module will be called keyspan_pda.
297
298config USB_SERIAL_KEYSPAN
299 tristate "USB Keyspan USA-xxx Serial Driver"
300 select USB_EZUSB_FX2
301 ---help---
302 Say Y here if you want to use Keyspan USB to serial converter
303 devices. This driver makes use of Keyspan's official firmware
304 and was developed with their support. You must also include
305 firmware to support your particular device(s).
306
307 See <http://blemings.org/hugh/keyspan.html> for more information.
308
309 To compile this driver as a module, choose M here: the
310 module will be called keyspan.
311
312config USB_SERIAL_KEYSPAN_MPR
313 bool "USB Keyspan MPR Firmware"
314 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
315 help
316 Say Y here to include firmware for the Keyspan MPR converter.
317
318config USB_SERIAL_KEYSPAN_USA28
319 bool "USB Keyspan USA-28 Firmware"
320 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
321 help
322 Say Y here to include firmware for the USA-28 converter.
323
324config USB_SERIAL_KEYSPAN_USA28X
325 bool "USB Keyspan USA-28X Firmware"
326 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
327 help
328 Say Y here to include firmware for the USA-28X converter.
329 Be sure you have a USA-28X, there are also 28XA and 28XB
330 models, the label underneath has the actual part number.
331
332config USB_SERIAL_KEYSPAN_USA28XA
333 bool "USB Keyspan USA-28XA Firmware"
334 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
335 help
336 Say Y here to include firmware for the USA-28XA converter.
337 Be sure you have a USA-28XA, there are also 28X and 28XB
338 models, the label underneath has the actual part number.
339
340config USB_SERIAL_KEYSPAN_USA28XB
341 bool "USB Keyspan USA-28XB Firmware"
342 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
343 help
344 Say Y here to include firmware for the USA-28XB converter.
345 Be sure you have a USA-28XB, there are also 28X and 28XA
346 models, the label underneath has the actual part number.
347
348config USB_SERIAL_KEYSPAN_USA19
349 bool "USB Keyspan USA-19 Firmware"
350 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
351 help
352 Say Y here to include firmware for the USA-19 converter.
353
354config USB_SERIAL_KEYSPAN_USA18X
355 bool "USB Keyspan USA-18X Firmware"
356 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
357 help
358 Say Y here to include firmware for the USA-18X converter.
359
360config USB_SERIAL_KEYSPAN_USA19W
361 bool "USB Keyspan USA-19W Firmware"
362 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
363 help
364 Say Y here to include firmware for the USA-19W converter.
365
366config USB_SERIAL_KEYSPAN_USA19QW
367 bool "USB Keyspan USA-19QW Firmware"
368 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
369 help
370 Say Y here to include firmware for the USA-19QW converter.
371
372config USB_SERIAL_KEYSPAN_USA19QI
373 bool "USB Keyspan USA-19QI Firmware"
374 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
375 help
376 Say Y here to include firmware for the USA-19QI converter.
377
378config USB_SERIAL_KEYSPAN_USA49W
379 bool "USB Keyspan USA-49W Firmware"
380 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
381 help
382 Say Y here to include firmware for the USA-49W converter.
383
384config USB_SERIAL_KEYSPAN_USA49WLC
385 bool "USB Keyspan USA-49WLC Firmware"
386 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
387 help
388 Say Y here to include firmware for the USA-49WLC converter.
389
390config USB_SERIAL_KLSI
391 tristate "USB KL5KUSB105 (Palmconnect) Driver"
392 ---help---
393 Say Y here if you want to use a KL5KUSB105 - based single port
394 serial adapter. The most widely known -- and currently the only
395 tested -- device in this category is the PalmConnect USB Serial
396 adapter sold by Palm Inc. for use with their Palm III and Palm V
397 series PDAs.
398
399 Please read <file:Documentation/usb/usb-serial.txt> for more
400 information.
401
402 To compile this driver as a module, choose M here: the
403 module will be called kl5kusb105.
404
405config USB_SERIAL_KOBIL_SCT
406 tristate "USB KOBIL chipcard reader"
407 ---help---
408 Say Y here if you want to use one of the following KOBIL USB chipcard
409 readers:
410
411 - USB TWIN
412 - KAAN Standard Plus
413 - KAAN SIM
414 - SecOVID Reader Plus
415 - B1 Professional
416 - KAAN Professional
417
418 Note that you need a current CT-API.
419 To compile this driver as a module, choose M here: the
420 module will be called kobil_sct.
421
422config USB_SERIAL_MCT_U232
423 tristate "USB MCT Single Port Serial Driver"
424 ---help---
425 Say Y here if you want to use a USB Serial single port adapter from
426 Magic Control Technology Corp. (U232 is one of the model numbers).
427
428 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
429 BAY, Belkin F5U109, and Belkin F5U409 devices.
430
431 To compile this driver as a module, choose M here: the
432 module will be called mct_u232.
433
434config USB_SERIAL_METRO
435 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
436 ---help---
437 Say Y here if you want to use a USB POS Metrologic barcode scanner.
438
439 To compile this driver as a module, choose M here: the
440 module will be called metro-usb.
441
442config USB_SERIAL_MOS7720
443 tristate "USB Moschip 7720 Serial Driver"
444 ---help---
445 Say Y here if you want to use USB Serial single and double
446 port adapters from Moschip Semiconductor Tech.
447
448 To compile this driver as a module, choose M here: the
449 module will be called mos7720.
450
451config USB_SERIAL_MOS7715_PARPORT
452 bool "Support for parallel port on the Moschip 7715"
453 depends on USB_SERIAL_MOS7720
454 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
455 select PARPORT_NOT_PC
456 ---help---
457 Say Y if you have a Moschip 7715 device and would like to use
458 the parallel port it provides. The port will register with
459 the parport subsystem as a low-level driver.
460
461config USB_SERIAL_MOS7840
462 tristate "USB Moschip 7840/7820 USB Serial Driver"
463 ---help---
464 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
465 Dual-Serial port device from MosChip Semiconductor.
466
467 The MCS7840 and MCS7820 have been developed to connect a wide range
468 of standard serial devices to a USB host. The MCS7840 has a USB
469 device controller connected to four (4) individual UARTs while the
470 MCS7820 controller connects to two (2) individual UARTs.
471
472 To compile this driver as a module, choose M here: the
473 module will be called mos7840. If unsure, choose N.
474
475config USB_SERIAL_MXUPORT
476 tristate "USB Moxa UPORT Serial Driver"
477 ---help---
478 Say Y here if you want to use a MOXA UPort Serial hub.
479
480 This driver supports:
481
482 [2 Port]
483 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
484 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
485 Isolation
486
487 [4 Port]
488 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
489 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
490 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
491 Isolation
492
493 [8 Port]
494 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
495 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
496
497 [16 Port]
498 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
499 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
500
501 To compile this driver as a module, choose M here: the
502 module will be called mxuport.
503
504config USB_SERIAL_NAVMAN
505 tristate "USB Navman GPS device"
506 help
507 To compile this driver as a module, choose M here: the
508 module will be called navman.
509
510config USB_SERIAL_PL2303
511 tristate "USB Prolific 2303 Single Port Serial Driver"
512 help
513 Say Y here if you want to use the PL2303 USB Serial single port
514 adapter from Prolific.
515
516 To compile this driver as a module, choose M here: the
517 module will be called pl2303.
518
519config USB_SERIAL_OTI6858
520 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
521 help
522 Say Y here if you want to use the OTi-6858 single port USB to serial
523 converter device.
524
525 To compile this driver as a module, choose M here: the
526 module will be called oti6858.
527
528config USB_SERIAL_QCAUX
529 tristate "USB Qualcomm Auxiliary Serial Port Driver"
530 help
531 Say Y here if you want to use the auxiliary serial ports provided
532 by many modems based on Qualcomm chipsets. These ports often use
533 a proprietary protocol called DM and cannot be used for AT- or
534 PPP-based communication.
535
536 To compile this driver as a module, choose M here: the
537 module will be called qcaux. If unsure, choose N.
538
539config USB_SERIAL_QUALCOMM
540 tristate "USB Qualcomm Serial modem"
541 select USB_SERIAL_WWAN
542 help
543 Say Y here if you have a Qualcomm USB modem device. These are
544 usually wireless cellular modems.
545
546 To compile this driver as a module, choose M here: the
547 module will be called qcserial.
548
549config USB_SERIAL_SPCP8X5
550 tristate "USB SPCP8x5 USB To Serial Driver"
551 help
552 Say Y here if you want to use the spcp8x5 converter chip. This is
553 commonly found in some Z-Wave USB devices.
554
555 To compile this driver as a module, choose M here: the
556 module will be called spcp8x5.
557
558config USB_SERIAL_SAFE
559 tristate "USB Safe Serial (Encapsulated) Driver"
560
561config USB_SERIAL_SAFE_PADDED
562 bool "USB Secure Encapsulated Driver - Padded"
563 depends on USB_SERIAL_SAFE
564
565config USB_SERIAL_SIERRAWIRELESS
566 tristate "USB Sierra Wireless Driver"
567 help
568 Say M here if you want to use Sierra Wireless devices.
569
570 Many devices have a feature known as TRU-Install. For those devices
571 to work properly, the USB Storage Sierra feature must be enabled.
572
573 To compile this driver as a module, choose M here: the
574 module will be called sierra.
575
576config USB_SERIAL_SYMBOL
577 tristate "USB Symbol Barcode driver (serial mode)"
578 help
579 Say Y here if you want to use a Symbol USB Barcode device
580 in serial emulation mode.
581
582 To compile this driver as a module, choose M here: the
583 module will be called symbolserial.
584
585config USB_SERIAL_TI
586 tristate "USB TI 3410/5052 Serial Driver"
587 help
588 Say Y here if you want to use the TI USB 3410 or 5052
589 serial devices.
590
591 To compile this driver as a module, choose M here: the
592 module will be called ti_usb_3410_5052.
593
594config USB_SERIAL_CYBERJACK
595 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
596 ---help---
597 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
598 reader. This is an interface to ISO 7816 compatible contact-based
599 chipcards, e.g. GSM SIMs.
600
601 To compile this driver as a module, choose M here: the
602 module will be called cyberjack.
603
604 If unsure, say N.
605
606config USB_SERIAL_XIRCOM
607 tristate "USB Xircom / Entregra Single Port Serial Driver"
608 select USB_EZUSB_FX2
609 help
610 Say Y here if you want to use a Xircom or Entregra single port USB to
611 serial converter device. This driver makes use of firmware
612 developed from scratch by Brian Warner.
613
614 To compile this driver as a module, choose M here: the
615 module will be called keyspan_pda.
616
617config USB_SERIAL_WWAN
618 tristate
619
620config USB_SERIAL_OPTION
621 tristate "USB driver for GSM and CDMA modems"
622 select USB_SERIAL_WWAN
623 help
624 Say Y here if you have a GSM or CDMA modem that's connected to USB.
625
626 This driver also supports several PCMCIA cards which have a
627 built-in OHCI-USB adapter and an internally-connected GSM modem.
628 The USB bus on these cards is not accessible externally.
629
630 Supported devices include (some of?) those made by:
631 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
632
633 To compile this driver as a module, choose M here: the
634 module will be called option.
635
636 If this driver doesn't recognize your device,
637 it might be accessible via the FTDI_SIO driver.
638
639config USB_SERIAL_OMNINET
640 tristate "USB ZyXEL omni.net LCD Plus Driver"
641 help
642 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
643
644 To compile this driver as a module, choose M here: the
645 module will be called omninet.
646
647config USB_SERIAL_OPTICON
648 tristate "USB Opticon Barcode driver (serial mode)"
649 help
650 Say Y here if you want to use a Opticon USB Barcode device
651 in serial emulation mode.
652
653 To compile this driver as a module, choose M here: the
654 module will be called opticon.
655
656config USB_SERIAL_XSENS_MT
657 tristate "Xsens motion tracker serial interface driver"
658 help
659 Say Y here if you want to use Xsens motion trackers.
660
661 This driver supports the new generation of motion trackers
662 by Xsens. Older devices can be accessed using the FTDI_SIO
663 driver.
664
665 To compile this driver as a module, choose M here: the
666 module will be called xsens_mt.
667
668config USB_SERIAL_WISHBONE
669 tristate "USB-Wishbone adapter interface driver"
670 help
671 Say Y here if you want to use a USB attached Wishbone bus.
672
673 Wishbone is an open hardware SoC bus commonly used in FPGA
674 designs. Bus access can be serialized using the Etherbone
675 protocol <http://www.ohwr.org/projects/etherbone-core>.
676
677 This driver is intended to be used with devices which attach
678 their internal Wishbone bus to a USB serial interface using
679 the Etherbone protocol. A userspace library is required to
680 speak the protocol made available by this driver as ttyUSBx.
681
682 To compile this driver as a module, choose M here: the
683 module will be called wishbone-serial.
684
685config USB_SERIAL_ZTE
686 tristate "ZTE USB serial driver"
687 help
688 Say Y here if you want to use a ZTE USB to serial device.
689
690 To compile this driver as a module, choose M here: the
691 module will be called zte.
692
693config USB_SERIAL_SSU100
694 tristate "USB Quatech SSU-100 Single Port Serial Driver"
695 help
696 Say Y here if you want to use the Quatech SSU-100 single
697 port usb to serial adapter.
698
699 To compile this driver as a module, choose M here: the
700 module will be called ssu100.
701
702config USB_SERIAL_QT2
703 tristate "USB Quatech Serial Driver for USB 2 devices"
704 help
705 Say Y here if you want to use the Quatech USB 2
706 serial adapters.
707
708 To compile this driver as a module, choose M here: the
709 module will be called quatech-serial.
710
711config USB_SERIAL_DEBUG
712 tristate "USB Debugging Device"
713 help
714 Say Y here if you have a USB debugging device used to receive
715 debugging data from another machine. The most common of these
716 devices is the NetChip TurboCONNECT device.
717
718 To compile this driver as a module, choose M here: the
719 module will be called usb-debug.
720
721endif # USB_SERIAL