Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 help
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 help
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Nokia mobile phones
70 - Novatel Wireless GPS receivers
71 - Siemens USB/MPI adapter.
72 - ViVOtech ViVOpay USB device.
73 - Infineon Modem Flashloader USB interface
74 - ZIO Motherboard USB serial interface
75
76 To compile this driver as a module, choose M here: the module
77 will be called usb-serial-simple.
78
79config USB_SERIAL_AIRCABLE
80 tristate "USB AIRcable Bluetooth Dongle Driver"
81 help
82 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
83
84 To compile this driver as a module, choose M here: the module
85 will be called aircable.
86
87config USB_SERIAL_ARK3116
88 tristate "USB ARK Micro 3116 USB Serial Driver"
89 help
90 Say Y here if you want to use a ARK Micro 3116 USB to Serial
91 device.
92
93 To compile this driver as a module, choose M here: the
94 module will be called ark3116
95
96config USB_SERIAL_BELKIN
97 tristate "USB Belkin and Peracom Single Port Serial Driver"
98 help
99 Say Y here if you want to use a Belkin USB Serial single port
100 adaptor (F5U103 is one of the model numbers) or the Peracom single
101 port USB to serial adapter.
102
103 To compile this driver as a module, choose M here: the
104 module will be called belkin_sa.
105
106config USB_SERIAL_CH341
107 tristate "USB Winchiphead CH341 Single Port Serial Driver"
108 help
109 Say Y here if you want to use a Winchiphead CH341 single port
110 USB to serial adapter.
111
112 To compile this driver as a module, choose M here: the
113 module will be called ch341.
114
115config USB_SERIAL_WHITEHEAT
116 tristate "USB ConnectTech WhiteHEAT Serial Driver"
117 select USB_EZUSB_FX2
118 help
119 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
120 USB to serial converter device.
121
122 To compile this driver as a module, choose M here: the
123 module will be called whiteheat.
124
125config USB_SERIAL_DIGI_ACCELEPORT
126 tristate "USB Digi International AccelePort USB Serial Driver"
127 help
128 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
129 2 port (plus parallel port) and 4 port USB serial converters. The
130 parallel port on the USB 2 appears as a third serial port on Linux.
131 The Digi Acceleport USB 8 is not yet supported by this driver.
132
133 To compile this driver as a module, choose M here: the
134 module will be called digi_acceleport.
135
136config USB_SERIAL_CP210X
137 tristate "USB CP210x family of UART Bridge Controllers"
138 help
139 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
140 to RS232 converters.
141
142 To compile this driver as a module, choose M here: the
143 module will be called cp210x.
144
145config USB_SERIAL_CYPRESS_M8
146 tristate "USB Cypress M8 USB Serial Driver"
147 help
148 Say Y here if you want to use a device that contains the Cypress
149 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
150
151 Attempted SMP support... send bug reports!
152
153 Supported microcontrollers in the CY4601 family are:
154 CY7C63741 CY7C63742 CY7C63743 CY7C64013
155
156 To compile this driver as a module, choose M here: the
157 module will be called cypress_m8.
158
159config USB_SERIAL_EMPEG
160 tristate "USB Empeg empeg-car Mark I/II Driver"
161 help
162 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
163 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
164 device node. See <file:Documentation/usb/usb-serial.rst> for more
165 tidbits of information.
166
167 To compile this driver as a module, choose M here: the
168 module will be called empeg.
169
170config USB_SERIAL_FTDI_SIO
171 tristate "USB FTDI Single Port Serial Driver"
172 help
173 Say Y here if you want to use a FTDI SIO single port USB to serial
174 converter device. The implementation I have is called the USC-1000.
175 This driver has also been tested with the 245 and 232 devices.
176
177 See <http://ftdi-usb-sio.sourceforge.net/> for more
178 information on this driver and the device.
179
180 To compile this driver as a module, choose M here: the
181 module will be called ftdi_sio.
182
183config USB_SERIAL_VISOR
184 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
185 help
186 Say Y here if you want to connect to your HandSpring Visor, Palm
187 m500 or m505 through its USB docking station. See
188 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
189 driver.
190
191 To compile this driver as a module, choose M here: the
192 module will be called visor.
193
194config USB_SERIAL_IPAQ
195 tristate "USB PocketPC PDA Driver"
196 help
197 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
198 or any other PDA running Windows CE 3.0 or PocketPC 2002
199 using a USB cradle/cable. For information on using the driver,
200 read <file:Documentation/usb/usb-serial.rst>.
201
202 To compile this driver as a module, choose M here: the
203 module will be called ipaq.
204
205config USB_SERIAL_IR
206 tristate "USB IR Dongle Serial Driver"
207 help
208 Say Y here if you want to enable simple serial support for USB IrDA
209 devices. This is useful if you do not want to use the full IrDA
210 stack.
211
212 To compile this driver as a module, choose M here: the
213 module will be called ir-usb.
214
215config USB_SERIAL_EDGEPORT
216 tristate "USB Inside Out Edgeport Serial Driver"
217 help
218 Say Y here if you want to use any of the following devices from
219 Inside Out Networks (Digi):
220 Edgeport/4
221 Rapidport/4
222 Edgeport/4t
223 Edgeport/2
224 Edgeport/4i
225 Edgeport/2i
226 Edgeport/421
227 Edgeport/21
228 Edgeport/8
229 Edgeport/8 Dual
230 Edgeport/2D8
231 Edgeport/4D8
232 Edgeport/8i
233 Edgeport/2 DIN
234 Edgeport/4 DIN
235 Edgeport/16 Dual
236
237 To compile this driver as a module, choose M here: the
238 module will be called io_edgeport.
239
240config USB_SERIAL_EDGEPORT_TI
241 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
242 help
243 Say Y here if you want to use any of the devices from Inside Out
244 Networks (Digi) that are not supported by the io_edgeport driver.
245 This includes the Edgeport/1 device.
246
247 To compile this driver as a module, choose M here: the
248 module will be called io_ti.
249
250config USB_SERIAL_F81232
251 tristate "USB Fintek F81232 Single Port Serial Driver"
252 help
253 Say Y here if you want to use the Fintek F81232 single
254 port usb to serial adapter.
255
256 To compile this driver as a module, choose M here: the
257 module will be called f81232.
258
259config USB_SERIAL_F8153X
260 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
261 help
262 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
263 USB to serial adapter.
264
265 To compile this driver as a module, choose M here: the
266 module will be called f81534.
267
268
269config USB_SERIAL_GARMIN
270 tristate "USB Garmin GPS driver"
271 help
272 Say Y here if you want to connect to your Garmin GPS.
273 Should work with most Garmin GPS devices which have a native USB port.
274
275 See <http://sourceforge.net/projects/garmin-gps> for the latest
276 version of the driver.
277
278 To compile this driver as a module, choose M here: the
279 module will be called garmin_gps.
280
281config USB_SERIAL_IPW
282 tristate "USB IPWireless (3G UMTS TDD) Driver"
283 select USB_SERIAL_WWAN
284 help
285 Say Y here if you want to use a IPWireless USB modem such as
286 the ones supplied by Axity3G/Sentech South Africa.
287
288 To compile this driver as a module, choose M here: the
289 module will be called ipw.
290
291config USB_SERIAL_IUU
292 tristate "USB Infinity USB Unlimited Phoenix Driver"
293 help
294 Say Y here if you want to use a IUU in phoenix mode and get
295 an extra ttyUSBx device. More information available on
296 http://eczema.ecze.com/iuu_phoenix.html
297
298 To compile this driver as a module, choose M here: the
299 module will be called iuu_phoenix.o
300
301config USB_SERIAL_KEYSPAN_PDA
302 tristate "USB Keyspan PDA / Xircom Single Port Serial Driver"
303 select USB_EZUSB_FX2
304 help
305 Say Y here if you want to use a Keyspan PDA, Xircom or Entrega single
306 port USB to serial converter device. This driver makes use of
307 firmware developed from scratch by Brian Warner.
308
309 To compile this driver as a module, choose M here: the
310 module will be called keyspan_pda.
311
312config USB_SERIAL_KEYSPAN
313 tristate "USB Keyspan USA-xxx Serial Driver"
314 select USB_EZUSB_FX2
315 help
316 Say Y here if you want to use Keyspan USB to serial converter
317 devices. This driver makes use of Keyspan's official firmware
318 and was developed with their support. You must also include
319 firmware to support your particular device(s).
320
321 See <http://blemings.org/hugh/keyspan.html> for more information.
322
323 To compile this driver as a module, choose M here: the
324 module will be called keyspan.
325
326config USB_SERIAL_KLSI
327 tristate "USB KL5KUSB105 (Palmconnect) Driver"
328 help
329 Say Y here if you want to use a KL5KUSB105 - based single port
330 serial adapter. The most widely known -- and currently the only
331 tested -- device in this category is the PalmConnect USB Serial
332 adapter sold by Palm Inc. for use with their Palm III and Palm V
333 series PDAs.
334
335 Please read <file:Documentation/usb/usb-serial.rst> for more
336 information.
337
338 To compile this driver as a module, choose M here: the
339 module will be called kl5kusb105.
340
341config USB_SERIAL_KOBIL_SCT
342 tristate "USB KOBIL chipcard reader"
343 help
344 Say Y here if you want to use one of the following KOBIL USB chipcard
345 readers:
346
347 - USB TWIN
348 - KAAN Standard Plus
349 - KAAN SIM
350 - SecOVID Reader Plus
351 - B1 Professional
352 - KAAN Professional
353
354 Note that you need a current CT-API.
355 To compile this driver as a module, choose M here: the
356 module will be called kobil_sct.
357
358config USB_SERIAL_MCT_U232
359 tristate "USB MCT Single Port Serial Driver"
360 help
361 Say Y here if you want to use a USB Serial single port adapter from
362 Magic Control Technology Corp. (U232 is one of the model numbers).
363
364 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
365 BAY, Belkin F5U109, and Belkin F5U409 devices.
366
367 To compile this driver as a module, choose M here: the
368 module will be called mct_u232.
369
370config USB_SERIAL_METRO
371 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
372 help
373 Say Y here if you want to use a USB POS Metrologic barcode scanner.
374
375 To compile this driver as a module, choose M here: the
376 module will be called metro-usb.
377
378config USB_SERIAL_MOS7720
379 tristate "USB Moschip 7720 Serial Driver"
380 help
381 Say Y here if you want to use USB Serial single and double
382 port adapters from Moschip Semiconductor Tech.
383
384 To compile this driver as a module, choose M here: the
385 module will be called mos7720.
386
387config USB_SERIAL_MOS7715_PARPORT
388 bool "Support for parallel port on the Moschip 7715"
389 depends on USB_SERIAL_MOS7720
390 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
391 select PARPORT_NOT_PC
392 help
393 Say Y if you have a Moschip 7715 device and would like to use
394 the parallel port it provides. The port will register with
395 the parport subsystem as a low-level driver.
396
397config USB_SERIAL_MOS7840
398 tristate "USB Moschip 7840/7820 USB Serial Driver"
399 help
400 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
401 Dual-Serial port device from MosChip Semiconductor.
402
403 The MCS7840 and MCS7820 have been developed to connect a wide range
404 of standard serial devices to a USB host. The MCS7840 has a USB
405 device controller connected to four (4) individual UARTs while the
406 MCS7820 controller connects to two (2) individual UARTs.
407
408 To compile this driver as a module, choose M here: the
409 module will be called mos7840. If unsure, choose N.
410
411config USB_SERIAL_MXUPORT
412 tristate "USB Moxa UPORT Serial Driver"
413 help
414 Say Y here if you want to use a MOXA UPort Serial hub.
415
416 This driver supports:
417
418 [2 Port]
419 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
420 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
421 Isolation
422
423 [4 Port]
424 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
425 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
426 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
427 Isolation
428
429 [8 Port]
430 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
431 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
432
433 [16 Port]
434 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
435 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
436
437 To compile this driver as a module, choose M here: the
438 module will be called mxuport.
439
440config USB_SERIAL_NAVMAN
441 tristate "USB Navman GPS device"
442 help
443 To compile this driver as a module, choose M here: the
444 module will be called navman.
445
446config USB_SERIAL_PL2303
447 tristate "USB Prolific 2303 Single Port Serial Driver"
448 help
449 Say Y here if you want to use the PL2303 USB Serial single port
450 adapter from Prolific.
451
452 To compile this driver as a module, choose M here: the
453 module will be called pl2303.
454
455config USB_SERIAL_OTI6858
456 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
457 help
458 Say Y here if you want to use the OTi-6858 single port USB to serial
459 converter device.
460
461 To compile this driver as a module, choose M here: the
462 module will be called oti6858.
463
464config USB_SERIAL_QCAUX
465 tristate "USB Qualcomm Auxiliary Serial Port Driver"
466 help
467 Say Y here if you want to use the auxiliary serial ports provided
468 by many modems based on Qualcomm chipsets. These ports often use
469 a proprietary protocol called DM and cannot be used for AT- or
470 PPP-based communication.
471
472 To compile this driver as a module, choose M here: the
473 module will be called qcaux. If unsure, choose N.
474
475config USB_SERIAL_QUALCOMM
476 tristate "USB Qualcomm Serial modem"
477 select USB_SERIAL_WWAN
478 help
479 Say Y here if you have a Qualcomm USB modem device. These are
480 usually wireless cellular modems.
481
482 To compile this driver as a module, choose M here: the
483 module will be called qcserial.
484
485config USB_SERIAL_SPCP8X5
486 tristate "USB SPCP8x5 USB To Serial Driver"
487 help
488 Say Y here if you want to use the spcp8x5 converter chip. This is
489 commonly found in some Z-Wave USB devices.
490
491 To compile this driver as a module, choose M here: the
492 module will be called spcp8x5.
493
494config USB_SERIAL_SAFE
495 tristate "USB Safe Serial (Encapsulated) Driver"
496
497config USB_SERIAL_SAFE_PADDED
498 bool "USB Secure Encapsulated Driver - Padded"
499 depends on USB_SERIAL_SAFE
500
501config USB_SERIAL_SIERRAWIRELESS
502 tristate "USB Sierra Wireless Driver"
503 help
504 Say M here if you want to use Sierra Wireless devices.
505
506 Many devices have a feature known as TRU-Install. For those devices
507 to work properly, the USB Storage Sierra feature must be enabled.
508
509 To compile this driver as a module, choose M here: the
510 module will be called sierra.
511
512config USB_SERIAL_SYMBOL
513 tristate "USB Symbol Barcode driver (serial mode)"
514 help
515 Say Y here if you want to use a Symbol USB Barcode device
516 in serial emulation mode.
517
518 To compile this driver as a module, choose M here: the
519 module will be called symbolserial.
520
521config USB_SERIAL_TI
522 tristate "USB TI 3410/5052 Serial Driver"
523 help
524 Say Y here if you want to use the TI USB 3410 or 5052
525 serial devices.
526
527 To compile this driver as a module, choose M here: the
528 module will be called ti_usb_3410_5052.
529
530config USB_SERIAL_CYBERJACK
531 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
532 help
533 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
534 reader. This is an interface to ISO 7816 compatible contact-based
535 chipcards, e.g. GSM SIMs.
536
537 To compile this driver as a module, choose M here: the
538 module will be called cyberjack.
539
540 If unsure, say N.
541
542config USB_SERIAL_WWAN
543 tristate
544
545config USB_SERIAL_OPTION
546 tristate "USB driver for GSM and CDMA modems"
547 select USB_SERIAL_WWAN
548 help
549 Say Y here if you have a GSM or CDMA modem that's connected to USB.
550
551 This driver also supports several PCMCIA cards which have a
552 built-in OHCI-USB adapter and an internally-connected GSM modem.
553 The USB bus on these cards is not accessible externally.
554
555 Supported devices include (some of?) those made by:
556 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
557
558 To compile this driver as a module, choose M here: the
559 module will be called option.
560
561 If this driver doesn't recognize your device,
562 it might be accessible via the FTDI_SIO driver.
563
564config USB_SERIAL_OMNINET
565 tristate "USB ZyXEL omni.net LCD Plus Driver"
566 help
567 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
568
569 To compile this driver as a module, choose M here: the
570 module will be called omninet.
571
572config USB_SERIAL_OPTICON
573 tristate "USB Opticon Barcode driver (serial mode)"
574 help
575 Say Y here if you want to use a Opticon USB Barcode device
576 in serial emulation mode.
577
578 To compile this driver as a module, choose M here: the
579 module will be called opticon.
580
581config USB_SERIAL_XSENS_MT
582 tristate "Xsens motion tracker serial interface driver"
583 help
584 Say Y here if you want to use Xsens motion trackers.
585
586 This driver supports the new generation of motion trackers
587 by Xsens. Older devices can be accessed using the FTDI_SIO
588 driver.
589
590 To compile this driver as a module, choose M here: the
591 module will be called xsens_mt.
592
593config USB_SERIAL_WISHBONE
594 tristate "USB-Wishbone adapter interface driver"
595 help
596 Say Y here if you want to use a USB attached Wishbone bus.
597
598 Wishbone is an open hardware SoC bus commonly used in FPGA
599 designs. Bus access can be serialized using the Etherbone
600 protocol <http://www.ohwr.org/projects/etherbone-core>.
601
602 This driver is intended to be used with devices which attach
603 their internal Wishbone bus to a USB serial interface using
604 the Etherbone protocol. A userspace library is required to
605 speak the protocol made available by this driver as ttyUSBx.
606
607 To compile this driver as a module, choose M here: the
608 module will be called wishbone-serial.
609
610config USB_SERIAL_SSU100
611 tristate "USB Quatech SSU-100 Single Port Serial Driver"
612 help
613 Say Y here if you want to use the Quatech SSU-100 single
614 port usb to serial adapter.
615
616 To compile this driver as a module, choose M here: the
617 module will be called ssu100.
618
619config USB_SERIAL_QT2
620 tristate "USB Quatech Serial Driver for USB 2 devices"
621 help
622 Say Y here if you want to use the Quatech USB 2
623 serial adapters.
624
625 To compile this driver as a module, choose M here: the
626 module will be called quatech-serial.
627
628config USB_SERIAL_UPD78F0730
629 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
630 help
631 Say Y here if you want to use the Renesas uPD78F0730
632 serial driver.
633
634 To compile this driver as a module, choose M here: the
635 module will be called upd78f0730.
636
637config USB_SERIAL_XR
638 tristate "USB MaxLinear/Exar USB to Serial driver"
639 help
640 Say Y here if you want to use MaxLinear/Exar USB to Serial converter
641 devices.
642
643 To compile this driver as a module, choose M here: the
644 module will be called xr_serial.
645
646config USB_SERIAL_DEBUG
647 tristate "USB Debugging Device"
648 help
649 Say Y here if you have a USB debugging device used to receive
650 debugging data from another machine. The most common of these
651 devices is the NetChip TurboCONNECT device.
652
653 To compile this driver as a module, choose M here: the
654 module will be called usb-debug.
655
656endif # USB_SERIAL
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on USB
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_EZUSB
46 bool "Functions for loading firmware on EZUSB chips"
47 help
48 Say Y here if you need EZUSB device support.
49
50config USB_SERIAL_GENERIC
51 bool "USB Generic Serial Driver"
52 help
53 Say Y here if you want to use the generic USB serial driver. Please
54 read <file:Documentation/usb/usb-serial.txt> for more information on
55 using this driver. It is recommended that the "USB Serial converter
56 support" be compiled as a module for this driver to be used
57 properly.
58
59config USB_SERIAL_AIRCABLE
60 tristate "USB AIRcable Bluetooth Dongle Driver"
61 help
62 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
63
64 To compile this driver as a module, choose M here: the module
65 will be called aircable.
66
67config USB_SERIAL_ARK3116
68 tristate "USB ARK Micro 3116 USB Serial Driver"
69 help
70 Say Y here if you want to use a ARK Micro 3116 USB to Serial
71 device.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ark3116
75
76config USB_SERIAL_BELKIN
77 tristate "USB Belkin and Peracom Single Port Serial Driver"
78 help
79 Say Y here if you want to use a Belkin USB Serial single port
80 adaptor (F5U103 is one of the model numbers) or the Peracom single
81 port USB to serial adapter.
82
83 To compile this driver as a module, choose M here: the
84 module will be called belkin_sa.
85
86config USB_SERIAL_CH341
87 tristate "USB Winchiphead CH341 Single Port Serial Driver"
88 help
89 Say Y here if you want to use a Winchiphead CH341 single port
90 USB to serial adapter.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ch341.
94
95config USB_SERIAL_WHITEHEAT
96 tristate "USB ConnectTech WhiteHEAT Serial Driver"
97 select USB_EZUSB
98 help
99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100 USB to serial converter device.
101
102 To compile this driver as a module, choose M here: the
103 module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106 tristate "USB Digi International AccelePort USB Serial Driver"
107 ---help---
108 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
109 2 port (plus parallel port) and 4 port USB serial converters. The
110 parallel port on the USB 2 appears as a third serial port on Linux.
111 The Digi Acceleport USB 8 is not yet supported by this driver.
112
113 This driver works under SMP with the usb-uhci driver. It does not
114 work under SMP with the uhci driver.
115
116 To compile this driver as a module, choose M here: the
117 module will be called digi_acceleport.
118
119config USB_SERIAL_CP210X
120 tristate "USB CP210x family of UART Bridge Controllers"
121 help
122 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
123 to RS232 converters.
124
125 To compile this driver as a module, choose M here: the
126 module will be called cp210x.
127
128config USB_SERIAL_CYPRESS_M8
129 tristate "USB Cypress M8 USB Serial Driver"
130 help
131 Say Y here if you want to use a device that contains the Cypress
132 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
133
134 Attempted SMP support... send bug reports!
135
136 Supported microcontrollers in the CY4601 family are:
137 CY7C63741 CY7C63742 CY7C63743 CY7C64013
138
139 To compile this driver as a module, choose M here: the
140 module will be called cypress_m8.
141
142config USB_SERIAL_EMPEG
143 tristate "USB Empeg empeg-car Mark I/II Driver"
144 help
145 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
146 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
147 device node. See <file:Documentation/usb/usb-serial.txt> for more
148 tidbits of information.
149
150 To compile this driver as a module, choose M here: the
151 module will be called empeg.
152
153config USB_SERIAL_FTDI_SIO
154 tristate "USB FTDI Single Port Serial Driver"
155 ---help---
156 Say Y here if you want to use a FTDI SIO single port USB to serial
157 converter device. The implementation I have is called the USC-1000.
158 This driver has also be tested with the 245 and 232 devices.
159
160 See <http://ftdi-usb-sio.sourceforge.net/> for more
161 information on this driver and the device.
162
163 To compile this driver as a module, choose M here: the
164 module will be called ftdi_sio.
165
166config USB_SERIAL_FUNSOFT
167 tristate "USB Fundamental Software Dongle Driver"
168 ---help---
169 Say Y here if you want to use the Fundamental Software dongle.
170
171 To compile this driver as a module, choose M here: the
172 module will be called funsoft.
173
174config USB_SERIAL_VISOR
175 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
176 help
177 Say Y here if you want to connect to your HandSpring Visor, Palm
178 m500 or m505 through its USB docking station. See
179 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
180 driver.
181
182 To compile this driver as a module, choose M here: the
183 module will be called visor.
184
185config USB_SERIAL_IPAQ
186 tristate "USB PocketPC PDA Driver"
187 help
188 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
189 or any other PDA running Windows CE 3.0 or PocketPC 2002
190 using a USB cradle/cable. For information on using the driver,
191 read <file:Documentation/usb/usb-serial.txt>.
192
193 To compile this driver as a module, choose M here: the
194 module will be called ipaq.
195
196config USB_SERIAL_IR
197 tristate "USB IR Dongle Serial Driver"
198 help
199 Say Y here if you want to enable simple serial support for USB IrDA
200 devices. This is useful if you do not want to use the full IrDA
201 stack.
202
203 To compile this driver as a module, choose M here: the
204 module will be called ir-usb.
205
206config USB_SERIAL_EDGEPORT
207 tristate "USB Inside Out Edgeport Serial Driver"
208 ---help---
209 Say Y here if you want to use any of the following devices from
210 Inside Out Networks (Digi):
211 Edgeport/4
212 Rapidport/4
213 Edgeport/4t
214 Edgeport/2
215 Edgeport/4i
216 Edgeport/2i
217 Edgeport/421
218 Edgeport/21
219 Edgeport/8
220 Edgeport/8 Dual
221 Edgeport/2D8
222 Edgeport/4D8
223 Edgeport/8i
224 Edgeport/2 DIN
225 Edgeport/4 DIN
226 Edgeport/16 Dual
227
228 To compile this driver as a module, choose M here: the
229 module will be called io_edgeport.
230
231config USB_SERIAL_EDGEPORT_TI
232 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
233 help
234 Say Y here if you want to use any of the devices from Inside Out
235 Networks (Digi) that are not supported by the io_edgeport driver.
236 This includes the Edgeport/1 device.
237
238 To compile this driver as a module, choose M here: the
239 module will be called io_ti.
240
241config USB_SERIAL_F81232
242 tristate "USB Fintek F81232 Single Port Serial Driver"
243 help
244 Say Y here if you want to use the Fintek F81232 single
245 port usb to serial adapter.
246
247 To compile this driver as a module, choose M here: the
248 module will be called f81232.
249
250config USB_SERIAL_GARMIN
251 tristate "USB Garmin GPS driver"
252 help
253 Say Y here if you want to connect to your Garmin GPS.
254 Should work with most Garmin GPS devices which have a native USB port.
255
256 See <http://sourceforge.net/projects/garmin-gps> for the latest
257 version of the driver.
258
259 To compile this driver as a module, choose M here: the
260 module will be called garmin_gps.
261
262config USB_SERIAL_IPW
263 tristate "USB IPWireless (3G UMTS TDD) Driver"
264 select USB_SERIAL_WWAN
265 help
266 Say Y here if you want to use a IPWireless USB modem such as
267 the ones supplied by Axity3G/Sentech South Africa.
268
269 To compile this driver as a module, choose M here: the
270 module will be called ipw.
271
272config USB_SERIAL_IUU
273 tristate "USB Infinity USB Unlimited Phoenix Driver"
274 help
275 Say Y here if you want to use a IUU in phoenix mode and get
276 an extra ttyUSBx device. More information available on
277 http://eczema.ecze.com/iuu_phoenix.html
278
279 To compile this driver as a module, choose M here: the
280 module will be called iuu_phoenix.o
281
282config USB_SERIAL_KEYSPAN_PDA
283 tristate "USB Keyspan PDA Single Port Serial Driver"
284 select USB_EZUSB
285 help
286 Say Y here if you want to use a Keyspan PDA single port USB to
287 serial converter device. This driver makes use of firmware
288 developed from scratch by Brian Warner.
289
290 To compile this driver as a module, choose M here: the
291 module will be called keyspan_pda.
292
293config USB_SERIAL_KEYSPAN
294 tristate "USB Keyspan USA-xxx Serial Driver"
295 select USB_EZUSB
296 ---help---
297 Say Y here if you want to use Keyspan USB to serial converter
298 devices. This driver makes use of Keyspan's official firmware
299 and was developed with their support. You must also include
300 firmware to support your particular device(s).
301
302 See <http://blemings.org/hugh/keyspan.html> for more information.
303
304 To compile this driver as a module, choose M here: the
305 module will be called keyspan.
306
307config USB_SERIAL_KEYSPAN_MPR
308 bool "USB Keyspan MPR Firmware"
309 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
310 help
311 Say Y here to include firmware for the Keyspan MPR converter.
312
313config USB_SERIAL_KEYSPAN_USA28
314 bool "USB Keyspan USA-28 Firmware"
315 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
316 help
317 Say Y here to include firmware for the USA-28 converter.
318
319config USB_SERIAL_KEYSPAN_USA28X
320 bool "USB Keyspan USA-28X Firmware"
321 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
322 help
323 Say Y here to include firmware for the USA-28X converter.
324 Be sure you have a USA-28X, there are also 28XA and 28XB
325 models, the label underneath has the actual part number.
326
327config USB_SERIAL_KEYSPAN_USA28XA
328 bool "USB Keyspan USA-28XA Firmware"
329 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
330 help
331 Say Y here to include firmware for the USA-28XA converter.
332 Be sure you have a USA-28XA, there are also 28X and 28XB
333 models, the label underneath has the actual part number.
334
335config USB_SERIAL_KEYSPAN_USA28XB
336 bool "USB Keyspan USA-28XB Firmware"
337 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
338 help
339 Say Y here to include firmware for the USA-28XB converter.
340 Be sure you have a USA-28XB, there are also 28X and 28XA
341 models, the label underneath has the actual part number.
342
343config USB_SERIAL_KEYSPAN_USA19
344 bool "USB Keyspan USA-19 Firmware"
345 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
346 help
347 Say Y here to include firmware for the USA-19 converter.
348
349config USB_SERIAL_KEYSPAN_USA18X
350 bool "USB Keyspan USA-18X Firmware"
351 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
352 help
353 Say Y here to include firmware for the USA-18X converter.
354
355config USB_SERIAL_KEYSPAN_USA19W
356 bool "USB Keyspan USA-19W Firmware"
357 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
358 help
359 Say Y here to include firmware for the USA-19W converter.
360
361config USB_SERIAL_KEYSPAN_USA19QW
362 bool "USB Keyspan USA-19QW Firmware"
363 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
364 help
365 Say Y here to include firmware for the USA-19QW converter.
366
367config USB_SERIAL_KEYSPAN_USA19QI
368 bool "USB Keyspan USA-19QI Firmware"
369 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
370 help
371 Say Y here to include firmware for the USA-19QI converter.
372
373config USB_SERIAL_KEYSPAN_USA49W
374 bool "USB Keyspan USA-49W Firmware"
375 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
376 help
377 Say Y here to include firmware for the USA-49W converter.
378
379config USB_SERIAL_KEYSPAN_USA49WLC
380 bool "USB Keyspan USA-49WLC Firmware"
381 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
382 help
383 Say Y here to include firmware for the USA-49WLC converter.
384
385config USB_SERIAL_KLSI
386 tristate "USB KL5KUSB105 (Palmconnect) Driver"
387 ---help---
388 Say Y here if you want to use a KL5KUSB105 - based single port
389 serial adapter. The most widely known -- and currently the only
390 tested -- device in this category is the PalmConnect USB Serial
391 adapter sold by Palm Inc. for use with their Palm III and Palm V
392 series PDAs.
393
394 Please read <file:Documentation/usb/usb-serial.txt> for more
395 information.
396
397 To compile this driver as a module, choose M here: the
398 module will be called kl5kusb105.
399
400config USB_SERIAL_KOBIL_SCT
401 tristate "USB KOBIL chipcard reader"
402 ---help---
403 Say Y here if you want to use one of the following KOBIL USB chipcard
404 readers:
405
406 - USB TWIN
407 - KAAN Standard Plus
408 - KAAN SIM
409 - SecOVID Reader Plus
410 - B1 Professional
411 - KAAN Professional
412
413 Note that you need a current CT-API.
414 To compile this driver as a module, choose M here: the
415 module will be called kobil_sct.
416
417config USB_SERIAL_MCT_U232
418 tristate "USB MCT Single Port Serial Driver"
419 ---help---
420 Say Y here if you want to use a USB Serial single port adapter from
421 Magic Control Technology Corp. (U232 is one of the model numbers).
422
423 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
424 BAY, Belkin F5U109, and Belkin F5U409 devices.
425
426 To compile this driver as a module, choose M here: the
427 module will be called mct_u232.
428
429config USB_SERIAL_METRO
430 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
431 ---help---
432 Say Y here if you want to use a USB POS Metrologic barcode scanner.
433
434 To compile this driver as a module, choose M here: the
435 module will be called metro-usb.
436
437config USB_SERIAL_MOS7720
438 tristate "USB Moschip 7720 Serial Driver"
439 ---help---
440 Say Y here if you want to use USB Serial single and double
441 port adapters from Moschip Semiconductor Tech.
442
443 To compile this driver as a module, choose M here: the
444 module will be called mos7720.
445
446config USB_SERIAL_MOS7715_PARPORT
447 bool "Support for parallel port on the Moschip 7715"
448 depends on USB_SERIAL_MOS7720
449 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
450 select PARPORT_NOT_PC
451 ---help---
452 Say Y if you have a Moschip 7715 device and would like to use
453 the parallel port it provides. The port will register with
454 the parport subsystem as a low-level driver.
455
456config USB_SERIAL_MOS7840
457 tristate "USB Moschip 7840/7820 USB Serial Driver"
458 ---help---
459 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
460 Dual-Serial port device from MosChip Semiconductor.
461
462 The MCS7840 and MCS7820 have been developed to connect a wide range
463 of standard serial devices to a USB host. The MCS7840 has a USB
464 device controller connected to four (4) individual UARTs while the
465 MCS7820 controller connects to two (2) individual UARTs.
466
467 To compile this driver as a module, choose M here: the
468 module will be called mos7840. If unsure, choose N.
469
470config USB_SERIAL_MOTOROLA
471 tristate "USB Motorola Phone modem driver"
472 ---help---
473 Say Y here if you want to use a Motorola phone with a USB
474 connector as a modem link.
475
476 To compile this driver as a module, choose M here: the
477 module will be called moto_modem. If unsure, choose N.
478
479config USB_SERIAL_NAVMAN
480 tristate "USB Navman GPS device"
481 help
482 To compile this driver as a module, choose M here: the
483 module will be called navman.
484
485config USB_SERIAL_PL2303
486 tristate "USB Prolific 2303 Single Port Serial Driver"
487 help
488 Say Y here if you want to use the PL2303 USB Serial single port
489 adapter from Prolific.
490
491 To compile this driver as a module, choose M here: the
492 module will be called pl2303.
493
494config USB_SERIAL_OTI6858
495 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
496 help
497 Say Y here if you want to use the OTi-6858 single port USB to serial
498 converter device.
499
500 To compile this driver as a module, choose M here: the
501 module will be called oti6858.
502
503config USB_SERIAL_QCAUX
504 tristate "USB Qualcomm Auxiliary Serial Port Driver"
505 help
506 Say Y here if you want to use the auxiliary serial ports provided
507 by many modems based on Qualcomm chipsets. These ports often use
508 a proprietary protocol called DM and cannot be used for AT- or
509 PPP-based communication.
510
511 To compile this driver as a module, choose M here: the
512 module will be called qcaux. If unsure, choose N.
513
514config USB_SERIAL_QUALCOMM
515 tristate "USB Qualcomm Serial modem"
516 select USB_SERIAL_WWAN
517 help
518 Say Y here if you have a Qualcomm USB modem device. These are
519 usually wireless cellular modems.
520
521 To compile this driver as a module, choose M here: the
522 module will be called qcserial.
523
524config USB_SERIAL_SPCP8X5
525 tristate "USB SPCP8x5 USB To Serial Driver"
526 help
527 Say Y here if you want to use the spcp8x5 converter chip. This is
528 commonly found in some Z-Wave USB devices.
529
530 To compile this driver as a module, choose M here: the
531 module will be called spcp8x5.
532
533config USB_SERIAL_HP4X
534 tristate "USB HP4x Calculators support"
535 help
536 Say Y here if you want to use an Hewlett-Packard 4x Calculator.
537
538 To compile this driver as a module, choose M here: the
539 module will be called hp4x.
540
541config USB_SERIAL_SAFE
542 tristate "USB Safe Serial (Encapsulated) Driver"
543
544config USB_SERIAL_SAFE_PADDED
545 bool "USB Secure Encapsulated Driver - Padded"
546 depends on USB_SERIAL_SAFE
547
548config USB_SERIAL_SIEMENS_MPI
549 tristate "USB Siemens MPI driver"
550 help
551 Say M here if you want to use a Siemens USB/MPI adapter.
552
553 To compile this driver as a module, choose M here: the
554 module will be called siemens_mpi.
555
556config USB_SERIAL_SIERRAWIRELESS
557 tristate "USB Sierra Wireless Driver"
558 help
559 Say M here if you want to use Sierra Wireless devices.
560
561 Many devices have a feature known as TRU-Install. For those devices
562 to work properly, the USB Storage Sierra feature must be enabled.
563
564 To compile this driver as a module, choose M here: the
565 module will be called sierra.
566
567config USB_SERIAL_SYMBOL
568 tristate "USB Symbol Barcode driver (serial mode)"
569 help
570 Say Y here if you want to use a Symbol USB Barcode device
571 in serial emulation mode.
572
573 To compile this driver as a module, choose M here: the
574 module will be called symbolserial.
575
576config USB_SERIAL_TI
577 tristate "USB TI 3410/5052 Serial Driver"
578 help
579 Say Y here if you want to use the TI USB 3410 or 5052
580 serial devices.
581
582 To compile this driver as a module, choose M here: the
583 module will be called ti_usb_3410_5052.
584
585config USB_SERIAL_CYBERJACK
586 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
587 ---help---
588 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
589 reader. This is an interface to ISO 7816 compatible contact-based
590 chipcards, e.g. GSM SIMs.
591
592 To compile this driver as a module, choose M here: the
593 module will be called cyberjack.
594
595 If unsure, say N.
596
597config USB_SERIAL_XIRCOM
598 tristate "USB Xircom / Entregra Single Port Serial Driver"
599 select USB_EZUSB
600 help
601 Say Y here if you want to use a Xircom or Entregra single port USB to
602 serial converter device. This driver makes use of firmware
603 developed from scratch by Brian Warner.
604
605 To compile this driver as a module, choose M here: the
606 module will be called keyspan_pda.
607
608config USB_SERIAL_WWAN
609 tristate
610
611config USB_SERIAL_OPTION
612 tristate "USB driver for GSM and CDMA modems"
613 select USB_SERIAL_WWAN
614 help
615 Say Y here if you have a GSM or CDMA modem that's connected to USB.
616
617 This driver also supports several PCMCIA cards which have a
618 built-in OHCI-USB adapter and an internally-connected GSM modem.
619 The USB bus on these cards is not accessible externally.
620
621 Supported devices include (some of?) those made by:
622 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
623
624 To compile this driver as a module, choose M here: the
625 module will be called option.
626
627 If this driver doesn't recognize your device,
628 it might be accessible via the FTDI_SIO driver.
629
630config USB_SERIAL_OMNINET
631 tristate "USB ZyXEL omni.net LCD Plus Driver"
632 help
633 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
634
635 To compile this driver as a module, choose M here: the
636 module will be called omninet.
637
638config USB_SERIAL_OPTICON
639 tristate "USB Opticon Barcode driver (serial mode)"
640 help
641 Say Y here if you want to use a Opticon USB Barcode device
642 in serial emulation mode.
643
644 To compile this driver as a module, choose M here: the
645 module will be called opticon.
646
647config USB_SERIAL_VIVOPAY_SERIAL
648 tristate "USB ViVOpay serial interface driver"
649 help
650 Say Y here if you want to use a ViVOtech ViVOpay USB device.
651
652 To compile this driver as a module, choose M here: the
653 module will be called vivopay-serial.
654
655config USB_SERIAL_ZIO
656 tristate "ZIO Motherboard USB serial interface driver"
657 help
658 Say Y here if you want to use ZIO Motherboard.
659
660 To compile this driver as a module, choose M here: the
661 module will be called zio.
662
663config USB_SERIAL_SSU100
664 tristate "USB Quatech SSU-100 Single Port Serial Driver"
665 help
666 Say Y here if you want to use the Quatech SSU-100 single
667 port usb to serial adapter.
668
669 To compile this driver as a module, choose M here: the
670 module will be called ssu100.
671
672config USB_SERIAL_QT2
673 tristate "USB Quatech Serial Driver for USB 2 devices"
674 help
675 Say Y here if you want to use the Quatech USB 2
676 serial adapters.
677
678 To compile this driver as a module, choose M here: the
679 module will be called quatech-serial.
680
681config USB_SERIAL_DEBUG
682 tristate "USB Debugging Device"
683 help
684 Say Y here if you have a USB debugging device used to receive
685 debugging data from another machine. The most common of these
686 devices is the NetChip TurboCONNECT device.
687
688 To compile this driver as a module, choose M here: the
689 module will be called usb-debug.
690
691endif # USB_SERIAL