Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * xhci-plat.c - xHCI host controller driver platform Bus Glue.
  4 *
  5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com
  6 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  7 *
  8 * A lot of code borrowed from the Linux xHCI driver.
 
 
 
 
  9 */
 10
 11#include <linux/clk.h>
 12#include <linux/dma-mapping.h>
 13#include <linux/module.h>
 14#include <linux/pci.h>
 15#include <linux/of.h>
 16#include <linux/of_device.h>
 17#include <linux/platform_device.h>
 18#include <linux/usb/phy.h>
 19#include <linux/slab.h>
 20#include <linux/acpi.h>
 21#include <linux/usb/of.h>
 22#include <linux/reset.h>
 23
 24#include "xhci.h"
 25#include "xhci-plat.h"
 26#include "xhci-mvebu.h"
 27
 28static struct hc_driver __read_mostly xhci_plat_hc_driver;
 29
 30static int xhci_plat_setup(struct usb_hcd *hcd);
 31static int xhci_plat_start(struct usb_hcd *hcd);
 32
 33static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
 34	.extra_priv_size = sizeof(struct xhci_plat_priv),
 35	.reset = xhci_plat_setup,
 36	.start = xhci_plat_start,
 37};
 38
 39static void xhci_priv_plat_start(struct usb_hcd *hcd)
 40{
 41	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 42
 43	if (priv->plat_start)
 44		priv->plat_start(hcd);
 45}
 46
 47static int xhci_priv_init_quirk(struct usb_hcd *hcd)
 48{
 49	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 50
 51	if (!priv->init_quirk)
 52		return 0;
 53
 54	return priv->init_quirk(hcd);
 55}
 56
 57static int xhci_priv_suspend_quirk(struct usb_hcd *hcd)
 58{
 59	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 60
 61	if (!priv->suspend_quirk)
 62		return 0;
 63
 64	return priv->suspend_quirk(hcd);
 65}
 66
 67static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
 68{
 69	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 70
 71	if (!priv->resume_quirk)
 72		return 0;
 73
 74	return priv->resume_quirk(hcd);
 75}
 76
 77static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 78{
 79	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
 80
 81	xhci->quirks |= priv->quirks;
 
 
 
 82}
 83
 84/* called during probe() after chip reset completes */
 85static int xhci_plat_setup(struct usb_hcd *hcd)
 86{
 87	int ret;
 88
 89
 90	ret = xhci_priv_init_quirk(hcd);
 91	if (ret)
 92		return ret;
 93
 94	return xhci_gen_setup(hcd, xhci_plat_quirks);
 95}
 96
 97static int xhci_plat_start(struct usb_hcd *hcd)
 98{
 99	xhci_priv_plat_start(hcd);
100	return xhci_run(hcd);
101}
102
103#ifdef CONFIG_OF
104static const struct xhci_plat_priv xhci_plat_marvell_armada = {
105	.init_quirk = xhci_mvebu_mbus_init_quirk,
106};
 
107
108static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
109	.init_quirk = xhci_mvebu_a3700_init_quirk,
110};
 
 
 
 
111
112static const struct xhci_plat_priv xhci_plat_brcm = {
113	.quirks = XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS,
114};
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
115
116static const struct of_device_id usb_xhci_of_match[] = {
117	{
118		.compatible = "generic-xhci",
119	}, {
120		.compatible = "xhci-platform",
121	}, {
122		.compatible = "marvell,armada-375-xhci",
123		.data = &xhci_plat_marvell_armada,
124	}, {
125		.compatible = "marvell,armada-380-xhci",
126		.data = &xhci_plat_marvell_armada,
127	}, {
128		.compatible = "marvell,armada3700-xhci",
129		.data = &xhci_plat_marvell_armada3700,
130	}, {
131		.compatible = "brcm,xhci-brcm-v2",
132		.data = &xhci_plat_brcm,
133	}, {
134		.compatible = "brcm,bcm2711-xhci",
135		.data = &xhci_plat_brcm,
136	}, {
137		.compatible = "brcm,bcm7445-xhci",
138		.data = &xhci_plat_brcm,
139	},
140	{},
141};
142MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
143#endif
144
145int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const struct xhci_plat_priv *priv_match)
146{
147	const struct hc_driver	*driver;
148	struct device		*tmpdev;
149	struct xhci_hcd		*xhci;
150	struct resource         *res;
151	struct usb_hcd		*hcd, *usb3_hcd;
152	int			ret;
153	int			irq;
154	struct xhci_plat_priv	*priv = NULL;
155	bool			of_match;
156
157	if (usb_disabled())
158		return -ENODEV;
159
160	driver = &xhci_plat_hc_driver;
161
162	irq = platform_get_irq(pdev, 0);
163	if (irq < 0)
164		return irq;
165
166	if (!sysdev)
167		sysdev = &pdev->dev;
 
168
169	ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
 
170	if (ret)
171		return ret;
 
 
 
 
172
173	pm_runtime_set_active(&pdev->dev);
174	pm_runtime_enable(&pdev->dev);
175	pm_runtime_get_noresume(&pdev->dev);
176
177	hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
178			       dev_name(&pdev->dev), NULL);
179	if (!hcd) {
180		ret = -ENOMEM;
181		goto disable_runtime;
182	}
183
184	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
185	if (IS_ERR(hcd->regs)) {
186		ret = PTR_ERR(hcd->regs);
187		goto put_hcd;
188	}
189
190	hcd->rsrc_start = res->start;
191	hcd->rsrc_len = resource_size(res);
192
193	xhci = hcd_to_xhci(hcd);
194
195	xhci->allow_single_roothub = 1;
196
197	/*
198	 * Not all platforms have clks so it is not an error if the
199	 * clock do not exist.
200	 */
201	xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
202	if (IS_ERR(xhci->reg_clk)) {
203		ret = PTR_ERR(xhci->reg_clk);
204		goto put_hcd;
205	}
206
207	xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
208	if (IS_ERR(xhci->clk)) {
209		ret = PTR_ERR(xhci->clk);
210		goto put_hcd;
 
211	}
212
213	xhci->reset = devm_reset_control_array_get_optional_shared(&pdev->dev);
214	if (IS_ERR(xhci->reset)) {
215		ret = PTR_ERR(xhci->reset);
216		goto put_hcd;
217	}
218
219	ret = reset_control_deassert(xhci->reset);
220	if (ret)
221		goto put_hcd;
222
223	ret = clk_prepare_enable(xhci->reg_clk);
224	if (ret)
225		goto err_reset;
226
227	ret = clk_prepare_enable(xhci->clk);
228	if (ret)
229		goto disable_reg_clk;
230
231	if (priv_match) {
232		priv = hcd_to_xhci_priv(hcd);
233		/* Just copy data for now */
234		*priv = *priv_match;
235	}
236
237	device_set_wakeup_capable(&pdev->dev, true);
238
239	xhci->main_hcd = hcd;
240
241	/* imod_interval is the interrupt moderation value in nanoseconds. */
242	xhci->imod_interval = 40000;
243
244	/* Iterate over all parent nodes for finding quirks */
245	for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
246
247		if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
248			xhci->quirks |= XHCI_HW_LPM_DISABLE;
249
250		if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
251			xhci->quirks |= XHCI_LPM_SUPPORT;
252
253		if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
254			xhci->quirks |= XHCI_BROKEN_PORT_PED;
255
256		if (device_property_read_bool(tmpdev, "xhci-sg-trb-cache-size-quirk"))
257			xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
258
259		device_property_read_u32(tmpdev, "imod-interval-ns",
260					 &xhci->imod_interval);
261	}
262
263	/*
264	 * Drivers such as dwc3 manages PHYs themself (and rely on driver name
265	 * matching for the xhci platform device).
266	 */
267	of_match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
268	if (of_match) {
269		hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
270		if (IS_ERR(hcd->usb_phy)) {
271			ret = PTR_ERR(hcd->usb_phy);
272			if (ret == -EPROBE_DEFER)
273				goto disable_clk;
274			hcd->usb_phy = NULL;
275		} else {
276			ret = usb_phy_init(hcd->usb_phy);
277			if (ret)
278				goto disable_clk;
279		}
280	}
281
282	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
 
283
284	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
285		hcd->skip_phy_initialization = 1;
286
287	if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
288		xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
289
290	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
291	if (ret)
292		goto disable_usb_phy;
293
294	if (!xhci_has_one_roothub(xhci)) {
295		xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
296						    dev_name(&pdev->dev), hcd);
297		if (!xhci->shared_hcd) {
298			ret = -ENOMEM;
299			goto dealloc_usb2_hcd;
300		}
301
302		if (of_match) {
303			xhci->shared_hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev,
304										"usb-phy", 1);
305			if (IS_ERR(xhci->shared_hcd->usb_phy)) {
306				xhci->shared_hcd->usb_phy = NULL;
307			} else {
308				ret = usb_phy_init(xhci->shared_hcd->usb_phy);
309				if (ret)
310					dev_err(sysdev, "%s init usb3phy fail (ret=%d)\n",
311						__func__, ret);
312			}
313		}
314
315		xhci->shared_hcd->tpl_support = hcd->tpl_support;
316	}
317
318	usb3_hcd = xhci_get_usb3_hcd(xhci);
319	if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4)
320		usb3_hcd->can_do_streams = 1;
321
322	if (xhci->shared_hcd) {
323		ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
324		if (ret)
325			goto put_usb3_hcd;
326	}
327
328	device_enable_async_suspend(&pdev->dev);
329	pm_runtime_put_noidle(&pdev->dev);
330
331	/*
332	 * Prevent runtime pm from being on as default, users should enable
333	 * runtime pm using power/control in sysfs.
334	 */
335	pm_runtime_forbid(&pdev->dev);
336
337	return 0;
338
339
340put_usb3_hcd:
341	usb_put_hcd(xhci->shared_hcd);
342
343dealloc_usb2_hcd:
344	usb_remove_hcd(hcd);
345
346disable_usb_phy:
347	usb_phy_shutdown(hcd->usb_phy);
348
349disable_clk:
350	clk_disable_unprepare(xhci->clk);
351
352disable_reg_clk:
353	clk_disable_unprepare(xhci->reg_clk);
354
355err_reset:
356	reset_control_assert(xhci->reset);
357
358put_hcd:
359	usb_put_hcd(hcd);
360
361disable_runtime:
362	pm_runtime_put_noidle(&pdev->dev);
363	pm_runtime_disable(&pdev->dev);
364
365	return ret;
366}
367EXPORT_SYMBOL_GPL(xhci_plat_probe);
368
369static int xhci_generic_plat_probe(struct platform_device *pdev)
370{
371	const struct xhci_plat_priv *priv_match;
372	struct device *sysdev;
373	int ret;
374
375	/*
376	 * sysdev must point to a device that is known to the system firmware
377	 * or PCI hardware. We handle these three cases here:
378	 * 1. xhci_plat comes from firmware
379	 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
380	 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
381	 */
382	for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
383		if (is_of_node(sysdev->fwnode) ||
384			is_acpi_device_node(sysdev->fwnode))
385			break;
386		else if (dev_is_pci(sysdev))
387			break;
388	}
389
390	if (!sysdev)
391		sysdev = &pdev->dev;
392
393	if (WARN_ON(!sysdev->dma_mask)) {
394		/* Platform did not initialize dma_mask */
395		ret = dma_coerce_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
396		if (ret)
397			return ret;
398	}
399
400	if (pdev->dev.of_node)
401		priv_match = of_device_get_match_data(&pdev->dev);
402	else
403		priv_match = dev_get_platdata(&pdev->dev);
404
405	return xhci_plat_probe(pdev, sysdev, priv_match);
406}
407
408void xhci_plat_remove(struct platform_device *dev)
409{
410	struct usb_hcd	*hcd = platform_get_drvdata(dev);
411	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
412	struct clk *clk = xhci->clk;
413	struct clk *reg_clk = xhci->reg_clk;
414	struct usb_hcd *shared_hcd = xhci->shared_hcd;
415
416	xhci->xhc_state |= XHCI_STATE_REMOVING;
417	pm_runtime_get_sync(&dev->dev);
418
419	if (shared_hcd) {
420		usb_remove_hcd(shared_hcd);
421		xhci->shared_hcd = NULL;
422	}
423
424	usb_phy_shutdown(hcd->usb_phy);
 
425
426	usb_remove_hcd(hcd);
427
428	if (shared_hcd)
429		usb_put_hcd(shared_hcd);
430
431	clk_disable_unprepare(clk);
432	clk_disable_unprepare(reg_clk);
433	reset_control_assert(xhci->reset);
434	usb_put_hcd(hcd);
 
435
436	pm_runtime_disable(&dev->dev);
437	pm_runtime_put_noidle(&dev->dev);
438	pm_runtime_set_suspended(&dev->dev);
439}
440EXPORT_SYMBOL_GPL(xhci_plat_remove);
441
 
442static int xhci_plat_suspend(struct device *dev)
443{
444	struct usb_hcd	*hcd = dev_get_drvdata(dev);
445	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
446	int ret;
447
448	if (pm_runtime_suspended(dev))
449		pm_runtime_resume(dev);
450
451	ret = xhci_priv_suspend_quirk(hcd);
452	if (ret)
453		return ret;
454	/*
455	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
456	 * to do wakeup during suspend.
457	 */
458	ret = xhci_suspend(xhci, device_may_wakeup(dev));
459	if (ret)
460		return ret;
461
462	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
463		clk_disable_unprepare(xhci->clk);
464		clk_disable_unprepare(xhci->reg_clk);
465	}
466
467	return 0;
468}
469
470static int xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
471{
472	struct usb_hcd	*hcd = dev_get_drvdata(dev);
473	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
474	int ret;
475
476	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
477		ret = clk_prepare_enable(xhci->clk);
478		if (ret)
479			return ret;
480
481		ret = clk_prepare_enable(xhci->reg_clk);
482		if (ret) {
483			clk_disable_unprepare(xhci->clk);
484			return ret;
485		}
486	}
487
488	ret = xhci_priv_resume_quirk(hcd);
489	if (ret)
490		goto disable_clks;
491
492	ret = xhci_resume(xhci, pmsg);
493	if (ret)
494		goto disable_clks;
495
496	pm_runtime_disable(dev);
497	pm_runtime_set_active(dev);
498	pm_runtime_enable(dev);
499
500	return 0;
501
502disable_clks:
503	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
504		clk_disable_unprepare(xhci->clk);
505		clk_disable_unprepare(xhci->reg_clk);
506	}
507
508	return ret;
509}
510
511static int xhci_plat_resume(struct device *dev)
512{
513	return xhci_plat_resume_common(dev, PMSG_RESUME);
514}
515
516static int xhci_plat_restore(struct device *dev)
517{
518	return xhci_plat_resume_common(dev, PMSG_RESTORE);
519}
520
521static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
522{
523	struct usb_hcd  *hcd = dev_get_drvdata(dev);
524	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
525	int ret;
526
527	ret = xhci_priv_suspend_quirk(hcd);
528	if (ret)
529		return ret;
530
531	return xhci_suspend(xhci, true);
532}
533
534static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
535{
536	struct usb_hcd  *hcd = dev_get_drvdata(dev);
537	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
538
539	return xhci_resume(xhci, PMSG_AUTO_RESUME);
540}
541
542const struct dev_pm_ops xhci_plat_pm_ops = {
543	.suspend = pm_sleep_ptr(xhci_plat_suspend),
544	.resume = pm_sleep_ptr(xhci_plat_resume),
545	.freeze = pm_sleep_ptr(xhci_plat_suspend),
546	.thaw = pm_sleep_ptr(xhci_plat_resume),
547	.poweroff = pm_sleep_ptr(xhci_plat_suspend),
548	.restore = pm_sleep_ptr(xhci_plat_restore),
549
550	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
551			   xhci_plat_runtime_resume,
552			   NULL)
553};
554EXPORT_SYMBOL_GPL(xhci_plat_pm_ops);
 
 
 
555
556#ifdef CONFIG_ACPI
557static const struct acpi_device_id usb_xhci_acpi_match[] = {
558	/* XHCI-compliant USB Controller */
559	{ "PNP0D10", },
560	{ }
561};
562MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
563#endif
564
565static struct platform_driver usb_generic_xhci_driver = {
566	.probe	= xhci_generic_plat_probe,
567	.remove_new = xhci_plat_remove,
568	.shutdown = usb_hcd_platform_shutdown,
569	.driver	= {
570		.name = "xhci-hcd",
571		.pm = &xhci_plat_pm_ops,
572		.of_match_table = of_match_ptr(usb_xhci_of_match),
573		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
574	},
575};
576MODULE_ALIAS("platform:xhci-hcd");
577
578static int __init xhci_plat_init(void)
579{
580	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
581	return platform_driver_register(&usb_generic_xhci_driver);
582}
583module_init(xhci_plat_init);
584
585static void __exit xhci_plat_exit(void)
586{
587	platform_driver_unregister(&usb_generic_xhci_driver);
588}
589module_exit(xhci_plat_exit);
590
591MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
592MODULE_LICENSE("GPL");
v3.15
 
  1/*
  2 * xhci-plat.c - xHCI host controller driver platform Bus Glue.
  3 *
  4 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
  5 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  6 *
  7 * A lot of code borrowed from the Linux xHCI driver.
  8 *
  9 * This program is free software; you can redistribute it and/or
 10 * modify it under the terms of the GNU General Public License
 11 * version 2 as published by the Free Software Foundation.
 12 */
 13
 
 
 
 
 
 
 14#include <linux/platform_device.h>
 15#include <linux/module.h>
 16#include <linux/slab.h>
 17#include <linux/of.h>
 18#include <linux/dma-mapping.h>
 
 19
 20#include "xhci.h"
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 21
 22static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 23{
 24	/*
 25	 * As of now platform drivers don't provide MSI support so we ensure
 26	 * here that the generic code does not try to make a pci_dev from our
 27	 * dev struct in order to setup MSI
 28	 */
 29	xhci->quirks |= XHCI_PLAT;
 30}
 31
 32/* called during probe() after chip reset completes */
 33static int xhci_plat_setup(struct usb_hcd *hcd)
 34{
 
 
 
 
 
 
 
 35	return xhci_gen_setup(hcd, xhci_plat_quirks);
 36}
 37
 38static const struct hc_driver xhci_plat_xhci_driver = {
 39	.description =		"xhci-hcd",
 40	.product_desc =		"xHCI Host Controller",
 41	.hcd_priv_size =	sizeof(struct xhci_hcd *),
 
 42
 43	/*
 44	 * generic hardware linkage
 45	 */
 46	.irq =			xhci_irq,
 47	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,
 48
 49	/*
 50	 * basic lifecycle operations
 51	 */
 52	.reset =		xhci_plat_setup,
 53	.start =		xhci_run,
 54	.stop =			xhci_stop,
 55	.shutdown =		xhci_shutdown,
 56
 57	/*
 58	 * managing i/o requests and associated device resources
 59	 */
 60	.urb_enqueue =		xhci_urb_enqueue,
 61	.urb_dequeue =		xhci_urb_dequeue,
 62	.alloc_dev =		xhci_alloc_dev,
 63	.free_dev =		xhci_free_dev,
 64	.alloc_streams =	xhci_alloc_streams,
 65	.free_streams =		xhci_free_streams,
 66	.add_endpoint =		xhci_add_endpoint,
 67	.drop_endpoint =	xhci_drop_endpoint,
 68	.endpoint_reset =	xhci_endpoint_reset,
 69	.check_bandwidth =	xhci_check_bandwidth,
 70	.reset_bandwidth =	xhci_reset_bandwidth,
 71	.address_device =	xhci_address_device,
 72	.enable_device =	xhci_enable_device,
 73	.update_hub_device =	xhci_update_hub_device,
 74	.reset_device =		xhci_discover_or_reset_device,
 75
 76	/*
 77	 * scheduling support
 78	 */
 79	.get_frame_number =	xhci_get_frame,
 80
 81	/* Root hub support */
 82	.hub_control =		xhci_hub_control,
 83	.hub_status_data =	xhci_hub_status_data,
 84	.bus_suspend =		xhci_bus_suspend,
 85	.bus_resume =		xhci_bus_resume,
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 86};
 
 
 87
 88static int xhci_plat_probe(struct platform_device *pdev)
 89{
 90	const struct hc_driver	*driver;
 
 91	struct xhci_hcd		*xhci;
 92	struct resource         *res;
 93	struct usb_hcd		*hcd;
 94	int			ret;
 95	int			irq;
 
 
 96
 97	if (usb_disabled())
 98		return -ENODEV;
 99
100	driver = &xhci_plat_xhci_driver;
101
102	irq = platform_get_irq(pdev, 0);
103	if (irq < 0)
104		return -ENODEV;
105
106	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
107	if (!res)
108		return -ENODEV;
109
110	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
111	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
112	if (ret)
113		return ret;
114	if (!pdev->dev.dma_mask)
115		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
116	else
117		dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
118
119	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
120	if (!hcd)
121		return -ENOMEM;
 
 
 
 
 
 
 
 
 
 
 
 
 
122
123	hcd->rsrc_start = res->start;
124	hcd->rsrc_len = resource_size(res);
125
126	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
127				driver->description)) {
128		dev_dbg(&pdev->dev, "controller already in use\n");
129		ret = -EBUSY;
 
 
 
 
 
 
 
130		goto put_hcd;
131	}
132
133	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
134	if (!hcd->regs) {
135		dev_dbg(&pdev->dev, "error mapping memory\n");
136		ret = -EFAULT;
137		goto release_mem_region;
138	}
139
140	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
141	if (ret)
142		goto unmap_registers;
143	device_wakeup_enable(hcd->self.controller);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
144
145	/* USB 2.0 roothub is stored in the platform_device now. */
146	hcd = platform_get_drvdata(pdev);
147	xhci = hcd_to_xhci(hcd);
148	xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
149			dev_name(&pdev->dev), hcd);
150	if (!xhci->shared_hcd) {
151		ret = -ENOMEM;
152		goto dealloc_usb2_hcd;
 
 
 
153	}
154
155	/*
156	 * Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset)
157	 * is called by usb_add_hcd().
158	 */
159	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
 
 
 
 
 
 
 
 
 
 
 
 
 
160
161	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
162		xhci->shared_hcd->can_do_streams = 1;
163
164	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 
 
 
 
 
 
165	if (ret)
166		goto put_usb3_hcd;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
167
168	return 0;
169
 
170put_usb3_hcd:
171	usb_put_hcd(xhci->shared_hcd);
172
173dealloc_usb2_hcd:
174	usb_remove_hcd(hcd);
175
176unmap_registers:
177	iounmap(hcd->regs);
 
 
 
178
179release_mem_region:
180	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
 
 
181
182put_hcd:
183	usb_put_hcd(hcd);
184
 
 
 
 
185	return ret;
186}
 
187
188static int xhci_plat_remove(struct platform_device *dev)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
189{
190	struct usb_hcd	*hcd = platform_get_drvdata(dev);
191	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 
 
 
 
 
 
 
 
 
 
 
192
193	usb_remove_hcd(xhci->shared_hcd);
194	usb_put_hcd(xhci->shared_hcd);
195
196	usb_remove_hcd(hcd);
197	iounmap(hcd->regs);
198	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
 
 
 
 
199	usb_put_hcd(hcd);
200	kfree(xhci);
201
202	return 0;
 
 
203}
 
204
205#ifdef CONFIG_PM
206static int xhci_plat_suspend(struct device *dev)
207{
208	struct usb_hcd	*hcd = dev_get_drvdata(dev);
209	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
210
211	return xhci_suspend(xhci);
 
 
 
 
 
212}
213
214static int xhci_plat_resume(struct device *dev)
215{
216	struct usb_hcd	*hcd = dev_get_drvdata(dev);
217	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 
 
 
 
 
 
 
 
 
 
 
 
 
218
219	return xhci_resume(xhci, 0);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
220}
221
222static const struct dev_pm_ops xhci_plat_pm_ops = {
223	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
224};
225#define DEV_PM_OPS	(&xhci_plat_pm_ops)
226#else
227#define DEV_PM_OPS	NULL
228#endif /* CONFIG_PM */
229
230#ifdef CONFIG_OF
231static const struct of_device_id usb_xhci_of_match[] = {
232	{ .compatible = "generic-xhci" },
233	{ .compatible = "xhci-platform" },
234	{ },
235};
236MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
237#endif
238
239static struct platform_driver usb_xhci_driver = {
240	.probe	= xhci_plat_probe,
241	.remove	= xhci_plat_remove,
 
242	.driver	= {
243		.name = "xhci-hcd",
244		.pm = DEV_PM_OPS,
245		.of_match_table = of_match_ptr(usb_xhci_of_match),
 
246	},
247};
248MODULE_ALIAS("platform:xhci-hcd");
249
250int xhci_register_plat(void)
251{
252	return platform_driver_register(&usb_xhci_driver);
 
253}
 
254
255void xhci_unregister_plat(void)
256{
257	platform_driver_unregister(&usb_xhci_driver);
258}