Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * xhci-plat.c - xHCI host controller driver platform Bus Glue.
  4 *
  5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com
  6 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  7 *
  8 * A lot of code borrowed from the Linux xHCI driver.
  9 */
 10
 11#include <linux/clk.h>
 12#include <linux/dma-mapping.h>
 13#include <linux/module.h>
 14#include <linux/pci.h>
 15#include <linux/of.h>
 16#include <linux/of_device.h>
 17#include <linux/platform_device.h>
 18#include <linux/usb/phy.h>
 19#include <linux/slab.h>
 20#include <linux/acpi.h>
 21#include <linux/usb/of.h>
 22#include <linux/reset.h>
 23
 24#include "xhci.h"
 25#include "xhci-plat.h"
 26#include "xhci-mvebu.h"
 
 27
 28static struct hc_driver __read_mostly xhci_plat_hc_driver;
 29
 30static int xhci_plat_setup(struct usb_hcd *hcd);
 31static int xhci_plat_start(struct usb_hcd *hcd);
 32
 33static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
 34	.extra_priv_size = sizeof(struct xhci_plat_priv),
 35	.reset = xhci_plat_setup,
 36	.start = xhci_plat_start,
 37};
 38
 39static void xhci_priv_plat_start(struct usb_hcd *hcd)
 40{
 41	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 42
 43	if (priv->plat_start)
 44		priv->plat_start(hcd);
 45}
 46
 47static int xhci_priv_init_quirk(struct usb_hcd *hcd)
 48{
 49	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 50
 51	if (!priv->init_quirk)
 52		return 0;
 53
 54	return priv->init_quirk(hcd);
 55}
 56
 57static int xhci_priv_suspend_quirk(struct usb_hcd *hcd)
 58{
 59	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 60
 61	if (!priv->suspend_quirk)
 62		return 0;
 63
 64	return priv->suspend_quirk(hcd);
 65}
 66
 67static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
 68{
 69	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 70
 71	if (!priv->resume_quirk)
 72		return 0;
 73
 74	return priv->resume_quirk(hcd);
 75}
 76
 77static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 78{
 79	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
 80
 81	xhci->quirks |= priv->quirks;
 
 
 
 
 
 82}
 83
 84/* called during probe() after chip reset completes */
 85static int xhci_plat_setup(struct usb_hcd *hcd)
 86{
 87	int ret;
 88
 89
 90	ret = xhci_priv_init_quirk(hcd);
 91	if (ret)
 92		return ret;
 93
 94	return xhci_gen_setup(hcd, xhci_plat_quirks);
 95}
 96
 97static int xhci_plat_start(struct usb_hcd *hcd)
 98{
 99	xhci_priv_plat_start(hcd);
100	return xhci_run(hcd);
101}
102
103#ifdef CONFIG_OF
104static const struct xhci_plat_priv xhci_plat_marvell_armada = {
105	.init_quirk = xhci_mvebu_mbus_init_quirk,
106};
107
108static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
109	.init_quirk = xhci_mvebu_a3700_init_quirk,
110};
111
112static const struct xhci_plat_priv xhci_plat_brcm = {
113	.quirks = XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS,
 
 
 
 
114};
115
116static const struct of_device_id usb_xhci_of_match[] = {
117	{
118		.compatible = "generic-xhci",
119	}, {
120		.compatible = "xhci-platform",
121	}, {
122		.compatible = "marvell,armada-375-xhci",
123		.data = &xhci_plat_marvell_armada,
124	}, {
125		.compatible = "marvell,armada-380-xhci",
126		.data = &xhci_plat_marvell_armada,
127	}, {
128		.compatible = "marvell,armada3700-xhci",
129		.data = &xhci_plat_marvell_armada3700,
130	}, {
131		.compatible = "brcm,xhci-brcm-v2",
132		.data = &xhci_plat_brcm,
 
 
 
 
 
 
 
 
 
 
 
 
133	}, {
134		.compatible = "brcm,bcm2711-xhci",
135		.data = &xhci_plat_brcm,
136	}, {
137		.compatible = "brcm,bcm7445-xhci",
138		.data = &xhci_plat_brcm,
139	},
140	{},
141};
142MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
143#endif
144
145int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const struct xhci_plat_priv *priv_match)
146{
 
147	const struct hc_driver	*driver;
148	struct device		*tmpdev;
149	struct xhci_hcd		*xhci;
150	struct resource         *res;
151	struct usb_hcd		*hcd, *usb3_hcd;
152	int			ret;
153	int			irq;
154	struct xhci_plat_priv	*priv = NULL;
155	bool			of_match;
156
157	if (usb_disabled())
158		return -ENODEV;
159
160	driver = &xhci_plat_hc_driver;
161
162	irq = platform_get_irq(pdev, 0);
163	if (irq < 0)
164		return irq;
165
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
166	if (!sysdev)
167		sysdev = &pdev->dev;
168
169	ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
170	if (ret)
171		return ret;
 
 
 
 
 
 
 
 
 
 
 
172
173	pm_runtime_set_active(&pdev->dev);
174	pm_runtime_enable(&pdev->dev);
175	pm_runtime_get_noresume(&pdev->dev);
176
177	hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
178			       dev_name(&pdev->dev), NULL);
179	if (!hcd) {
180		ret = -ENOMEM;
181		goto disable_runtime;
182	}
183
184	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 
185	if (IS_ERR(hcd->regs)) {
186		ret = PTR_ERR(hcd->regs);
187		goto put_hcd;
188	}
189
190	hcd->rsrc_start = res->start;
191	hcd->rsrc_len = resource_size(res);
192
193	xhci = hcd_to_xhci(hcd);
194
195	xhci->allow_single_roothub = 1;
196
197	/*
198	 * Not all platforms have clks so it is not an error if the
199	 * clock do not exist.
200	 */
201	xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
202	if (IS_ERR(xhci->reg_clk)) {
203		ret = PTR_ERR(xhci->reg_clk);
204		goto put_hcd;
205	}
206
 
 
 
 
207	xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
208	if (IS_ERR(xhci->clk)) {
209		ret = PTR_ERR(xhci->clk);
210		goto put_hcd;
211	}
212
213	xhci->reset = devm_reset_control_array_get_optional_shared(&pdev->dev);
214	if (IS_ERR(xhci->reset)) {
215		ret = PTR_ERR(xhci->reset);
216		goto put_hcd;
217	}
218
219	ret = reset_control_deassert(xhci->reset);
220	if (ret)
221		goto put_hcd;
222
223	ret = clk_prepare_enable(xhci->reg_clk);
224	if (ret)
225		goto err_reset;
226
227	ret = clk_prepare_enable(xhci->clk);
228	if (ret)
229		goto disable_reg_clk;
230
 
231	if (priv_match) {
232		priv = hcd_to_xhci_priv(hcd);
 
233		/* Just copy data for now */
234		*priv = *priv_match;
 
235	}
236
237	device_set_wakeup_capable(&pdev->dev, true);
238
239	xhci->main_hcd = hcd;
 
 
 
 
 
 
240
241	/* imod_interval is the interrupt moderation value in nanoseconds. */
242	xhci->imod_interval = 40000;
243
244	/* Iterate over all parent nodes for finding quirks */
245	for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
246
247		if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
248			xhci->quirks |= XHCI_HW_LPM_DISABLE;
249
250		if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
251			xhci->quirks |= XHCI_LPM_SUPPORT;
252
253		if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
254			xhci->quirks |= XHCI_BROKEN_PORT_PED;
255
256		if (device_property_read_bool(tmpdev, "xhci-sg-trb-cache-size-quirk"))
257			xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
258
259		device_property_read_u32(tmpdev, "imod-interval-ns",
260					 &xhci->imod_interval);
261	}
262
263	/*
264	 * Drivers such as dwc3 manages PHYs themself (and rely on driver name
265	 * matching for the xhci platform device).
266	 */
267	of_match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
268	if (of_match) {
269		hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
270		if (IS_ERR(hcd->usb_phy)) {
271			ret = PTR_ERR(hcd->usb_phy);
272			if (ret == -EPROBE_DEFER)
273				goto disable_clk;
274			hcd->usb_phy = NULL;
275		} else {
276			ret = usb_phy_init(hcd->usb_phy);
277			if (ret)
278				goto disable_clk;
279		}
280	}
281
282	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
283
284	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
285		hcd->skip_phy_initialization = 1;
286
287	if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
288		xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
289
290	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
291	if (ret)
292		goto disable_usb_phy;
293
294	if (!xhci_has_one_roothub(xhci)) {
295		xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
296						    dev_name(&pdev->dev), hcd);
297		if (!xhci->shared_hcd) {
298			ret = -ENOMEM;
299			goto dealloc_usb2_hcd;
300		}
301
302		if (of_match) {
303			xhci->shared_hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev,
304										"usb-phy", 1);
305			if (IS_ERR(xhci->shared_hcd->usb_phy)) {
306				xhci->shared_hcd->usb_phy = NULL;
307			} else {
308				ret = usb_phy_init(xhci->shared_hcd->usb_phy);
309				if (ret)
310					dev_err(sysdev, "%s init usb3phy fail (ret=%d)\n",
311						__func__, ret);
312			}
313		}
314
315		xhci->shared_hcd->tpl_support = hcd->tpl_support;
316	}
317
318	usb3_hcd = xhci_get_usb3_hcd(xhci);
319	if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4)
320		usb3_hcd->can_do_streams = 1;
321
322	if (xhci->shared_hcd) {
323		ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
324		if (ret)
325			goto put_usb3_hcd;
326	}
327
328	device_enable_async_suspend(&pdev->dev);
329	pm_runtime_put_noidle(&pdev->dev);
330
331	/*
332	 * Prevent runtime pm from being on as default, users should enable
333	 * runtime pm using power/control in sysfs.
334	 */
335	pm_runtime_forbid(&pdev->dev);
336
337	return 0;
338
339
340put_usb3_hcd:
341	usb_put_hcd(xhci->shared_hcd);
342
343dealloc_usb2_hcd:
344	usb_remove_hcd(hcd);
345
346disable_usb_phy:
347	usb_phy_shutdown(hcd->usb_phy);
348
 
 
 
349disable_clk:
350	clk_disable_unprepare(xhci->clk);
351
352disable_reg_clk:
353	clk_disable_unprepare(xhci->reg_clk);
354
355err_reset:
356	reset_control_assert(xhci->reset);
357
358put_hcd:
359	usb_put_hcd(hcd);
360
361disable_runtime:
362	pm_runtime_put_noidle(&pdev->dev);
363	pm_runtime_disable(&pdev->dev);
364
365	return ret;
366}
367EXPORT_SYMBOL_GPL(xhci_plat_probe);
368
369static int xhci_generic_plat_probe(struct platform_device *pdev)
370{
371	const struct xhci_plat_priv *priv_match;
372	struct device *sysdev;
373	int ret;
374
375	/*
376	 * sysdev must point to a device that is known to the system firmware
377	 * or PCI hardware. We handle these three cases here:
378	 * 1. xhci_plat comes from firmware
379	 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
380	 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
381	 */
382	for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
383		if (is_of_node(sysdev->fwnode) ||
384			is_acpi_device_node(sysdev->fwnode))
385			break;
386		else if (dev_is_pci(sysdev))
387			break;
388	}
389
390	if (!sysdev)
391		sysdev = &pdev->dev;
392
393	if (WARN_ON(!sysdev->dma_mask)) {
394		/* Platform did not initialize dma_mask */
395		ret = dma_coerce_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
396		if (ret)
397			return ret;
398	}
399
400	if (pdev->dev.of_node)
401		priv_match = of_device_get_match_data(&pdev->dev);
402	else
403		priv_match = dev_get_platdata(&pdev->dev);
404
405	return xhci_plat_probe(pdev, sysdev, priv_match);
406}
407
408void xhci_plat_remove(struct platform_device *dev)
409{
410	struct usb_hcd	*hcd = platform_get_drvdata(dev);
411	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
412	struct clk *clk = xhci->clk;
413	struct clk *reg_clk = xhci->reg_clk;
414	struct usb_hcd *shared_hcd = xhci->shared_hcd;
415
416	xhci->xhc_state |= XHCI_STATE_REMOVING;
417	pm_runtime_get_sync(&dev->dev);
418
419	if (shared_hcd) {
420		usb_remove_hcd(shared_hcd);
421		xhci->shared_hcd = NULL;
422	}
423
 
 
424	usb_phy_shutdown(hcd->usb_phy);
425
426	usb_remove_hcd(hcd);
427
428	if (shared_hcd)
429		usb_put_hcd(shared_hcd);
430
431	clk_disable_unprepare(clk);
432	clk_disable_unprepare(reg_clk);
433	reset_control_assert(xhci->reset);
434	usb_put_hcd(hcd);
435
436	pm_runtime_disable(&dev->dev);
437	pm_runtime_put_noidle(&dev->dev);
438	pm_runtime_set_suspended(&dev->dev);
 
 
 
439}
440EXPORT_SYMBOL_GPL(xhci_plat_remove);
441
442static int xhci_plat_suspend(struct device *dev)
443{
444	struct usb_hcd	*hcd = dev_get_drvdata(dev);
445	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
446	int ret;
447
448	if (pm_runtime_suspended(dev))
449		pm_runtime_resume(dev);
450
451	ret = xhci_priv_suspend_quirk(hcd);
452	if (ret)
453		return ret;
454	/*
455	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
456	 * to do wakeup during suspend.
 
 
 
 
457	 */
458	ret = xhci_suspend(xhci, device_may_wakeup(dev));
459	if (ret)
460		return ret;
461
462	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
463		clk_disable_unprepare(xhci->clk);
464		clk_disable_unprepare(xhci->reg_clk);
465	}
466
467	return 0;
468}
469
470static int xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
471{
472	struct usb_hcd	*hcd = dev_get_drvdata(dev);
473	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
474	int ret;
475
476	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
477		ret = clk_prepare_enable(xhci->clk);
478		if (ret)
479			return ret;
480
481		ret = clk_prepare_enable(xhci->reg_clk);
482		if (ret) {
483			clk_disable_unprepare(xhci->clk);
484			return ret;
485		}
486	}
487
488	ret = xhci_priv_resume_quirk(hcd);
489	if (ret)
490		goto disable_clks;
491
492	ret = xhci_resume(xhci, pmsg);
493	if (ret)
494		goto disable_clks;
495
496	pm_runtime_disable(dev);
497	pm_runtime_set_active(dev);
498	pm_runtime_enable(dev);
499
500	return 0;
501
502disable_clks:
503	if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) {
504		clk_disable_unprepare(xhci->clk);
505		clk_disable_unprepare(xhci->reg_clk);
506	}
507
508	return ret;
509}
510
511static int xhci_plat_resume(struct device *dev)
512{
513	return xhci_plat_resume_common(dev, PMSG_RESUME);
514}
515
516static int xhci_plat_restore(struct device *dev)
517{
518	return xhci_plat_resume_common(dev, PMSG_RESTORE);
519}
520
521static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
522{
523	struct usb_hcd  *hcd = dev_get_drvdata(dev);
524	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
525	int ret;
526
527	ret = xhci_priv_suspend_quirk(hcd);
528	if (ret)
529		return ret;
530
531	return xhci_suspend(xhci, true);
532}
533
534static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
535{
536	struct usb_hcd  *hcd = dev_get_drvdata(dev);
537	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
538
539	return xhci_resume(xhci, PMSG_AUTO_RESUME);
540}
541
542const struct dev_pm_ops xhci_plat_pm_ops = {
543	.suspend = pm_sleep_ptr(xhci_plat_suspend),
544	.resume = pm_sleep_ptr(xhci_plat_resume),
545	.freeze = pm_sleep_ptr(xhci_plat_suspend),
546	.thaw = pm_sleep_ptr(xhci_plat_resume),
547	.poweroff = pm_sleep_ptr(xhci_plat_suspend),
548	.restore = pm_sleep_ptr(xhci_plat_restore),
549
550	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
551			   xhci_plat_runtime_resume,
552			   NULL)
553};
554EXPORT_SYMBOL_GPL(xhci_plat_pm_ops);
555
556#ifdef CONFIG_ACPI
557static const struct acpi_device_id usb_xhci_acpi_match[] = {
558	/* XHCI-compliant USB Controller */
559	{ "PNP0D10", },
560	{ }
561};
562MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
563#endif
564
565static struct platform_driver usb_generic_xhci_driver = {
566	.probe	= xhci_generic_plat_probe,
567	.remove_new = xhci_plat_remove,
568	.shutdown = usb_hcd_platform_shutdown,
569	.driver	= {
570		.name = "xhci-hcd",
571		.pm = &xhci_plat_pm_ops,
572		.of_match_table = of_match_ptr(usb_xhci_of_match),
573		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
574	},
575};
576MODULE_ALIAS("platform:xhci-hcd");
577
578static int __init xhci_plat_init(void)
579{
580	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
581	return platform_driver_register(&usb_generic_xhci_driver);
582}
583module_init(xhci_plat_init);
584
585static void __exit xhci_plat_exit(void)
586{
587	platform_driver_unregister(&usb_generic_xhci_driver);
588}
589module_exit(xhci_plat_exit);
590
591MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
592MODULE_LICENSE("GPL");
v5.4
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * xhci-plat.c - xHCI host controller driver platform Bus Glue.
  4 *
  5 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
  6 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  7 *
  8 * A lot of code borrowed from the Linux xHCI driver.
  9 */
 10
 11#include <linux/clk.h>
 12#include <linux/dma-mapping.h>
 13#include <linux/module.h>
 14#include <linux/pci.h>
 15#include <linux/of.h>
 16#include <linux/of_device.h>
 17#include <linux/platform_device.h>
 18#include <linux/usb/phy.h>
 19#include <linux/slab.h>
 20#include <linux/acpi.h>
 21#include <linux/usb/of.h>
 
 22
 23#include "xhci.h"
 24#include "xhci-plat.h"
 25#include "xhci-mvebu.h"
 26#include "xhci-rcar.h"
 27
 28static struct hc_driver __read_mostly xhci_plat_hc_driver;
 29
 30static int xhci_plat_setup(struct usb_hcd *hcd);
 31static int xhci_plat_start(struct usb_hcd *hcd);
 32
 33static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
 34	.extra_priv_size = sizeof(struct xhci_plat_priv),
 35	.reset = xhci_plat_setup,
 36	.start = xhci_plat_start,
 37};
 38
 39static void xhci_priv_plat_start(struct usb_hcd *hcd)
 40{
 41	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 42
 43	if (priv->plat_start)
 44		priv->plat_start(hcd);
 45}
 46
 47static int xhci_priv_init_quirk(struct usb_hcd *hcd)
 48{
 49	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 50
 51	if (!priv->init_quirk)
 52		return 0;
 53
 54	return priv->init_quirk(hcd);
 55}
 56
 
 
 
 
 
 
 
 
 
 
 57static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
 58{
 59	struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 60
 61	if (!priv->resume_quirk)
 62		return 0;
 63
 64	return priv->resume_quirk(hcd);
 65}
 66
 67static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 68{
 69	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
 70
 71	/*
 72	 * As of now platform drivers don't provide MSI support so we ensure
 73	 * here that the generic code does not try to make a pci_dev from our
 74	 * dev struct in order to setup MSI
 75	 */
 76	xhci->quirks |= XHCI_PLAT | priv->quirks;
 77}
 78
 79/* called during probe() after chip reset completes */
 80static int xhci_plat_setup(struct usb_hcd *hcd)
 81{
 82	int ret;
 83
 84
 85	ret = xhci_priv_init_quirk(hcd);
 86	if (ret)
 87		return ret;
 88
 89	return xhci_gen_setup(hcd, xhci_plat_quirks);
 90}
 91
 92static int xhci_plat_start(struct usb_hcd *hcd)
 93{
 94	xhci_priv_plat_start(hcd);
 95	return xhci_run(hcd);
 96}
 97
 98#ifdef CONFIG_OF
 99static const struct xhci_plat_priv xhci_plat_marvell_armada = {
100	.init_quirk = xhci_mvebu_mbus_init_quirk,
101};
102
103static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
104	.init_quirk = xhci_mvebu_a3700_init_quirk,
105};
106
107static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
108	SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1)
109};
110
111static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
112	SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3)
113};
114
115static const struct of_device_id usb_xhci_of_match[] = {
116	{
117		.compatible = "generic-xhci",
118	}, {
119		.compatible = "xhci-platform",
120	}, {
121		.compatible = "marvell,armada-375-xhci",
122		.data = &xhci_plat_marvell_armada,
123	}, {
124		.compatible = "marvell,armada-380-xhci",
125		.data = &xhci_plat_marvell_armada,
126	}, {
127		.compatible = "marvell,armada3700-xhci",
128		.data = &xhci_plat_marvell_armada3700,
129	}, {
130		.compatible = "renesas,xhci-r8a7790",
131		.data = &xhci_plat_renesas_rcar_gen2,
132	}, {
133		.compatible = "renesas,xhci-r8a7791",
134		.data = &xhci_plat_renesas_rcar_gen2,
135	}, {
136		.compatible = "renesas,xhci-r8a7793",
137		.data = &xhci_plat_renesas_rcar_gen2,
138	}, {
139		.compatible = "renesas,xhci-r8a7795",
140		.data = &xhci_plat_renesas_rcar_gen3,
141	}, {
142		.compatible = "renesas,xhci-r8a7796",
143		.data = &xhci_plat_renesas_rcar_gen3,
144	}, {
145		.compatible = "renesas,rcar-gen2-xhci",
146		.data = &xhci_plat_renesas_rcar_gen2,
147	}, {
148		.compatible = "renesas,rcar-gen3-xhci",
149		.data = &xhci_plat_renesas_rcar_gen3,
150	},
151	{},
152};
153MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
154#endif
155
156static int xhci_plat_probe(struct platform_device *pdev)
157{
158	const struct xhci_plat_priv *priv_match;
159	const struct hc_driver	*driver;
160	struct device		*sysdev, *tmpdev;
161	struct xhci_hcd		*xhci;
162	struct resource         *res;
163	struct usb_hcd		*hcd;
164	int			ret;
165	int			irq;
 
 
166
167	if (usb_disabled())
168		return -ENODEV;
169
170	driver = &xhci_plat_hc_driver;
171
172	irq = platform_get_irq(pdev, 0);
173	if (irq < 0)
174		return irq;
175
176	/*
177	 * sysdev must point to a device that is known to the system firmware
178	 * or PCI hardware. We handle these three cases here:
179	 * 1. xhci_plat comes from firmware
180	 * 2. xhci_plat is child of a device from firmware (dwc3-plat)
181	 * 3. xhci_plat is grandchild of a pci device (dwc3-pci)
182	 */
183	for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
184		if (is_of_node(sysdev->fwnode) ||
185			is_acpi_device_node(sysdev->fwnode))
186			break;
187#ifdef CONFIG_PCI
188		else if (sysdev->bus == &pci_bus_type)
189			break;
190#endif
191	}
192
193	if (!sysdev)
194		sysdev = &pdev->dev;
195
196	/* Try to set 64-bit DMA first */
197	if (WARN_ON(!sysdev->dma_mask))
198		/* Platform did not initialize dma_mask */
199		ret = dma_coerce_mask_and_coherent(sysdev,
200						   DMA_BIT_MASK(64));
201	else
202		ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
203
204	/* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
205	if (ret) {
206		ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32));
207		if (ret)
208			return ret;
209	}
210
211	pm_runtime_set_active(&pdev->dev);
212	pm_runtime_enable(&pdev->dev);
213	pm_runtime_get_noresume(&pdev->dev);
214
215	hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
216			       dev_name(&pdev->dev), NULL);
217	if (!hcd) {
218		ret = -ENOMEM;
219		goto disable_runtime;
220	}
221
222	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
223	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
224	if (IS_ERR(hcd->regs)) {
225		ret = PTR_ERR(hcd->regs);
226		goto put_hcd;
227	}
228
229	hcd->rsrc_start = res->start;
230	hcd->rsrc_len = resource_size(res);
231
232	xhci = hcd_to_xhci(hcd);
233
 
 
234	/*
235	 * Not all platforms have clks so it is not an error if the
236	 * clock do not exist.
237	 */
238	xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
239	if (IS_ERR(xhci->reg_clk)) {
240		ret = PTR_ERR(xhci->reg_clk);
241		goto put_hcd;
242	}
243
244	ret = clk_prepare_enable(xhci->reg_clk);
245	if (ret)
246		goto put_hcd;
247
248	xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
249	if (IS_ERR(xhci->clk)) {
250		ret = PTR_ERR(xhci->clk);
251		goto disable_reg_clk;
 
 
 
 
 
 
252	}
253
 
 
 
 
 
 
 
 
254	ret = clk_prepare_enable(xhci->clk);
255	if (ret)
256		goto disable_reg_clk;
257
258	priv_match = of_device_get_match_data(&pdev->dev);
259	if (priv_match) {
260		struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
261
262		/* Just copy data for now */
263		if (priv_match)
264			*priv = *priv_match;
265	}
266
267	device_wakeup_enable(hcd->self.controller);
268
269	xhci->main_hcd = hcd;
270	xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
271			dev_name(&pdev->dev), hcd);
272	if (!xhci->shared_hcd) {
273		ret = -ENOMEM;
274		goto disable_clk;
275	}
276
277	/* imod_interval is the interrupt moderation value in nanoseconds. */
278	xhci->imod_interval = 40000;
279
280	/* Iterate over all parent nodes for finding quirks */
281	for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
282
283		if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
284			xhci->quirks |= XHCI_HW_LPM_DISABLE;
285
286		if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
287			xhci->quirks |= XHCI_LPM_SUPPORT;
288
289		if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
290			xhci->quirks |= XHCI_BROKEN_PORT_PED;
291
 
 
 
292		device_property_read_u32(tmpdev, "imod-interval-ns",
293					 &xhci->imod_interval);
294	}
295
296	hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
297	if (IS_ERR(hcd->usb_phy)) {
298		ret = PTR_ERR(hcd->usb_phy);
299		if (ret == -EPROBE_DEFER)
300			goto put_usb3_hcd;
301		hcd->usb_phy = NULL;
302	} else {
303		ret = usb_phy_init(hcd->usb_phy);
304		if (ret)
305			goto put_usb3_hcd;
 
 
 
 
 
 
 
306	}
307
308	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
309	xhci->shared_hcd->tpl_support = hcd->tpl_support;
 
 
 
 
 
 
310	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
311	if (ret)
312		goto disable_usb_phy;
313
314	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
315		xhci->shared_hcd->can_do_streams = 1;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
316
317	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
318	if (ret)
319		goto dealloc_usb2_hcd;
 
 
 
 
 
 
 
 
 
320
321	device_enable_async_suspend(&pdev->dev);
322	pm_runtime_put_noidle(&pdev->dev);
323
324	/*
325	 * Prevent runtime pm from being on as default, users should enable
326	 * runtime pm using power/control in sysfs.
327	 */
328	pm_runtime_forbid(&pdev->dev);
329
330	return 0;
331
332
 
 
 
333dealloc_usb2_hcd:
334	usb_remove_hcd(hcd);
335
336disable_usb_phy:
337	usb_phy_shutdown(hcd->usb_phy);
338
339put_usb3_hcd:
340	usb_put_hcd(xhci->shared_hcd);
341
342disable_clk:
343	clk_disable_unprepare(xhci->clk);
344
345disable_reg_clk:
346	clk_disable_unprepare(xhci->reg_clk);
347
 
 
 
348put_hcd:
349	usb_put_hcd(hcd);
350
351disable_runtime:
352	pm_runtime_put_noidle(&pdev->dev);
353	pm_runtime_disable(&pdev->dev);
354
355	return ret;
356}
 
357
358static int xhci_plat_remove(struct platform_device *dev)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
359{
360	struct usb_hcd	*hcd = platform_get_drvdata(dev);
361	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
362	struct clk *clk = xhci->clk;
363	struct clk *reg_clk = xhci->reg_clk;
364	struct usb_hcd *shared_hcd = xhci->shared_hcd;
365
366	xhci->xhc_state |= XHCI_STATE_REMOVING;
 
 
 
 
 
 
367
368	usb_remove_hcd(shared_hcd);
369	xhci->shared_hcd = NULL;
370	usb_phy_shutdown(hcd->usb_phy);
371
372	usb_remove_hcd(hcd);
373	usb_put_hcd(shared_hcd);
 
 
374
375	clk_disable_unprepare(clk);
376	clk_disable_unprepare(reg_clk);
 
377	usb_put_hcd(hcd);
378
 
 
379	pm_runtime_set_suspended(&dev->dev);
380	pm_runtime_disable(&dev->dev);
381
382	return 0;
383}
 
384
385static int __maybe_unused xhci_plat_suspend(struct device *dev)
386{
387	struct usb_hcd	*hcd = dev_get_drvdata(dev);
388	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 
389
 
 
 
 
 
 
390	/*
391	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
392	 * to do wakeup during suspend. Since xhci_plat_suspend is currently
393	 * only designed for system suspend, device_may_wakeup() is enough
394	 * to dertermine whether host is allowed to do wakeup. Need to
395	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
396	 * also applies to runtime suspend.
397	 */
398	return xhci_suspend(xhci, device_may_wakeup(dev));
 
 
 
 
 
 
 
 
 
399}
400
401static int __maybe_unused xhci_plat_resume(struct device *dev)
402{
403	struct usb_hcd	*hcd = dev_get_drvdata(dev);
404	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
405	int ret;
406
 
 
 
 
 
 
 
 
 
 
 
 
407	ret = xhci_priv_resume_quirk(hcd);
408	if (ret)
409		return ret;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
410
411	return xhci_resume(xhci, 0);
 
 
412}
413
414static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
415{
416	struct usb_hcd  *hcd = dev_get_drvdata(dev);
417	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
 
 
 
 
418
419	return xhci_suspend(xhci, true);
420}
421
422static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
423{
424	struct usb_hcd  *hcd = dev_get_drvdata(dev);
425	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
426
427	return xhci_resume(xhci, 0);
428}
429
430static const struct dev_pm_ops xhci_plat_pm_ops = {
431	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
 
 
 
 
 
432
433	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
434			   xhci_plat_runtime_resume,
435			   NULL)
436};
 
437
 
438static const struct acpi_device_id usb_xhci_acpi_match[] = {
439	/* XHCI-compliant USB Controller */
440	{ "PNP0D10", },
441	{ }
442};
443MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
 
444
445static struct platform_driver usb_xhci_driver = {
446	.probe	= xhci_plat_probe,
447	.remove	= xhci_plat_remove,
 
448	.driver	= {
449		.name = "xhci-hcd",
450		.pm = &xhci_plat_pm_ops,
451		.of_match_table = of_match_ptr(usb_xhci_of_match),
452		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
453	},
454};
455MODULE_ALIAS("platform:xhci-hcd");
456
457static int __init xhci_plat_init(void)
458{
459	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
460	return platform_driver_register(&usb_xhci_driver);
461}
462module_init(xhci_plat_init);
463
464static void __exit xhci_plat_exit(void)
465{
466	platform_driver_unregister(&usb_xhci_driver);
467}
468module_exit(xhci_plat_exit);
469
470MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
471MODULE_LICENSE("GPL");