Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * drivers/usb/core/usb.c
4 *
5 * (C) Copyright Linus Torvalds 1999
6 * (C) Copyright Johannes Erdfelt 1999-2001
7 * (C) Copyright Andreas Gal 1999
8 * (C) Copyright Gregory P. Smith 1999
9 * (C) Copyright Deti Fliegl 1999 (new USB architecture)
10 * (C) Copyright Randy Dunlap 2000
11 * (C) Copyright David Brownell 2000-2004
12 * (C) Copyright Yggdrasil Computing, Inc. 2000
13 * (usb_device_id matching changes by Adam J. Richter)
14 * (C) Copyright Greg Kroah-Hartman 2002-2003
15 *
16 * Released under the GPLv2 only.
17 *
18 * NOTE! This is not actually a driver at all, rather this is
19 * just a collection of helper routines that implement the
20 * generic USB things that the real drivers can use..
21 *
22 * Think of this as a "USB library" rather than anything else,
23 * with no callbacks. Callbacks are evil.
24 */
25
26#include <linux/module.h>
27#include <linux/moduleparam.h>
28#include <linux/of.h>
29#include <linux/string.h>
30#include <linux/bitops.h>
31#include <linux/slab.h>
32#include <linux/kmod.h>
33#include <linux/init.h>
34#include <linux/spinlock.h>
35#include <linux/errno.h>
36#include <linux/usb.h>
37#include <linux/usb/hcd.h>
38#include <linux/mutex.h>
39#include <linux/workqueue.h>
40#include <linux/debugfs.h>
41#include <linux/usb/of.h>
42
43#include <asm/io.h>
44#include <linux/scatterlist.h>
45#include <linux/mm.h>
46#include <linux/dma-mapping.h>
47
48#include "hub.h"
49
50const char *usbcore_name = "usbcore";
51
52static bool nousb; /* Disable USB when built into kernel image */
53
54module_param(nousb, bool, 0444);
55
56/*
57 * for external read access to <nousb>
58 */
59int usb_disabled(void)
60{
61 return nousb;
62}
63EXPORT_SYMBOL_GPL(usb_disabled);
64
65#ifdef CONFIG_PM
66/* Default delay value, in seconds */
67static int usb_autosuspend_delay = CONFIG_USB_AUTOSUSPEND_DELAY;
68module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
69MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
70
71#else
72#define usb_autosuspend_delay 0
73#endif
74
75static bool match_endpoint(struct usb_endpoint_descriptor *epd,
76 struct usb_endpoint_descriptor **bulk_in,
77 struct usb_endpoint_descriptor **bulk_out,
78 struct usb_endpoint_descriptor **int_in,
79 struct usb_endpoint_descriptor **int_out)
80{
81 switch (usb_endpoint_type(epd)) {
82 case USB_ENDPOINT_XFER_BULK:
83 if (usb_endpoint_dir_in(epd)) {
84 if (bulk_in && !*bulk_in) {
85 *bulk_in = epd;
86 break;
87 }
88 } else {
89 if (bulk_out && !*bulk_out) {
90 *bulk_out = epd;
91 break;
92 }
93 }
94
95 return false;
96 case USB_ENDPOINT_XFER_INT:
97 if (usb_endpoint_dir_in(epd)) {
98 if (int_in && !*int_in) {
99 *int_in = epd;
100 break;
101 }
102 } else {
103 if (int_out && !*int_out) {
104 *int_out = epd;
105 break;
106 }
107 }
108
109 return false;
110 default:
111 return false;
112 }
113
114 return (!bulk_in || *bulk_in) && (!bulk_out || *bulk_out) &&
115 (!int_in || *int_in) && (!int_out || *int_out);
116}
117
118/**
119 * usb_find_common_endpoints() -- look up common endpoint descriptors
120 * @alt: alternate setting to search
121 * @bulk_in: pointer to descriptor pointer, or NULL
122 * @bulk_out: pointer to descriptor pointer, or NULL
123 * @int_in: pointer to descriptor pointer, or NULL
124 * @int_out: pointer to descriptor pointer, or NULL
125 *
126 * Search the alternate setting's endpoint descriptors for the first bulk-in,
127 * bulk-out, interrupt-in and interrupt-out endpoints and return them in the
128 * provided pointers (unless they are NULL).
129 *
130 * If a requested endpoint is not found, the corresponding pointer is set to
131 * NULL.
132 *
133 * Return: Zero if all requested descriptors were found, or -ENXIO otherwise.
134 */
135int usb_find_common_endpoints(struct usb_host_interface *alt,
136 struct usb_endpoint_descriptor **bulk_in,
137 struct usb_endpoint_descriptor **bulk_out,
138 struct usb_endpoint_descriptor **int_in,
139 struct usb_endpoint_descriptor **int_out)
140{
141 struct usb_endpoint_descriptor *epd;
142 int i;
143
144 if (bulk_in)
145 *bulk_in = NULL;
146 if (bulk_out)
147 *bulk_out = NULL;
148 if (int_in)
149 *int_in = NULL;
150 if (int_out)
151 *int_out = NULL;
152
153 for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
154 epd = &alt->endpoint[i].desc;
155
156 if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out))
157 return 0;
158 }
159
160 return -ENXIO;
161}
162EXPORT_SYMBOL_GPL(usb_find_common_endpoints);
163
164/**
165 * usb_find_common_endpoints_reverse() -- look up common endpoint descriptors
166 * @alt: alternate setting to search
167 * @bulk_in: pointer to descriptor pointer, or NULL
168 * @bulk_out: pointer to descriptor pointer, or NULL
169 * @int_in: pointer to descriptor pointer, or NULL
170 * @int_out: pointer to descriptor pointer, or NULL
171 *
172 * Search the alternate setting's endpoint descriptors for the last bulk-in,
173 * bulk-out, interrupt-in and interrupt-out endpoints and return them in the
174 * provided pointers (unless they are NULL).
175 *
176 * If a requested endpoint is not found, the corresponding pointer is set to
177 * NULL.
178 *
179 * Return: Zero if all requested descriptors were found, or -ENXIO otherwise.
180 */
181int usb_find_common_endpoints_reverse(struct usb_host_interface *alt,
182 struct usb_endpoint_descriptor **bulk_in,
183 struct usb_endpoint_descriptor **bulk_out,
184 struct usb_endpoint_descriptor **int_in,
185 struct usb_endpoint_descriptor **int_out)
186{
187 struct usb_endpoint_descriptor *epd;
188 int i;
189
190 if (bulk_in)
191 *bulk_in = NULL;
192 if (bulk_out)
193 *bulk_out = NULL;
194 if (int_in)
195 *int_in = NULL;
196 if (int_out)
197 *int_out = NULL;
198
199 for (i = alt->desc.bNumEndpoints - 1; i >= 0; --i) {
200 epd = &alt->endpoint[i].desc;
201
202 if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out))
203 return 0;
204 }
205
206 return -ENXIO;
207}
208EXPORT_SYMBOL_GPL(usb_find_common_endpoints_reverse);
209
210/**
211 * usb_find_endpoint() - Given an endpoint address, search for the endpoint's
212 * usb_host_endpoint structure in an interface's current altsetting.
213 * @intf: the interface whose current altsetting should be searched
214 * @ep_addr: the endpoint address (number and direction) to find
215 *
216 * Search the altsetting's list of endpoints for one with the specified address.
217 *
218 * Return: Pointer to the usb_host_endpoint if found, %NULL otherwise.
219 */
220static const struct usb_host_endpoint *usb_find_endpoint(
221 const struct usb_interface *intf, unsigned int ep_addr)
222{
223 int n;
224 const struct usb_host_endpoint *ep;
225
226 n = intf->cur_altsetting->desc.bNumEndpoints;
227 ep = intf->cur_altsetting->endpoint;
228 for (; n > 0; (--n, ++ep)) {
229 if (ep->desc.bEndpointAddress == ep_addr)
230 return ep;
231 }
232 return NULL;
233}
234
235/**
236 * usb_check_bulk_endpoints - Check whether an interface's current altsetting
237 * contains a set of bulk endpoints with the given addresses.
238 * @intf: the interface whose current altsetting should be searched
239 * @ep_addrs: 0-terminated array of the endpoint addresses (number and
240 * direction) to look for
241 *
242 * Search for endpoints with the specified addresses and check their types.
243 *
244 * Return: %true if all the endpoints are found and are bulk, %false otherwise.
245 */
246bool usb_check_bulk_endpoints(
247 const struct usb_interface *intf, const u8 *ep_addrs)
248{
249 const struct usb_host_endpoint *ep;
250
251 for (; *ep_addrs; ++ep_addrs) {
252 ep = usb_find_endpoint(intf, *ep_addrs);
253 if (!ep || !usb_endpoint_xfer_bulk(&ep->desc))
254 return false;
255 }
256 return true;
257}
258EXPORT_SYMBOL_GPL(usb_check_bulk_endpoints);
259
260/**
261 * usb_check_int_endpoints - Check whether an interface's current altsetting
262 * contains a set of interrupt endpoints with the given addresses.
263 * @intf: the interface whose current altsetting should be searched
264 * @ep_addrs: 0-terminated array of the endpoint addresses (number and
265 * direction) to look for
266 *
267 * Search for endpoints with the specified addresses and check their types.
268 *
269 * Return: %true if all the endpoints are found and are interrupt,
270 * %false otherwise.
271 */
272bool usb_check_int_endpoints(
273 const struct usb_interface *intf, const u8 *ep_addrs)
274{
275 const struct usb_host_endpoint *ep;
276
277 for (; *ep_addrs; ++ep_addrs) {
278 ep = usb_find_endpoint(intf, *ep_addrs);
279 if (!ep || !usb_endpoint_xfer_int(&ep->desc))
280 return false;
281 }
282 return true;
283}
284EXPORT_SYMBOL_GPL(usb_check_int_endpoints);
285
286/**
287 * usb_find_alt_setting() - Given a configuration, find the alternate setting
288 * for the given interface.
289 * @config: the configuration to search (not necessarily the current config).
290 * @iface_num: interface number to search in
291 * @alt_num: alternate interface setting number to search for.
292 *
293 * Search the configuration's interface cache for the given alt setting.
294 *
295 * Return: The alternate setting, if found. %NULL otherwise.
296 */
297struct usb_host_interface *usb_find_alt_setting(
298 struct usb_host_config *config,
299 unsigned int iface_num,
300 unsigned int alt_num)
301{
302 struct usb_interface_cache *intf_cache = NULL;
303 int i;
304
305 if (!config)
306 return NULL;
307 for (i = 0; i < config->desc.bNumInterfaces; i++) {
308 if (config->intf_cache[i]->altsetting[0].desc.bInterfaceNumber
309 == iface_num) {
310 intf_cache = config->intf_cache[i];
311 break;
312 }
313 }
314 if (!intf_cache)
315 return NULL;
316 for (i = 0; i < intf_cache->num_altsetting; i++)
317 if (intf_cache->altsetting[i].desc.bAlternateSetting == alt_num)
318 return &intf_cache->altsetting[i];
319
320 printk(KERN_DEBUG "Did not find alt setting %u for intf %u, "
321 "config %u\n", alt_num, iface_num,
322 config->desc.bConfigurationValue);
323 return NULL;
324}
325EXPORT_SYMBOL_GPL(usb_find_alt_setting);
326
327/**
328 * usb_ifnum_to_if - get the interface object with a given interface number
329 * @dev: the device whose current configuration is considered
330 * @ifnum: the desired interface
331 *
332 * This walks the device descriptor for the currently active configuration
333 * to find the interface object with the particular interface number.
334 *
335 * Note that configuration descriptors are not required to assign interface
336 * numbers sequentially, so that it would be incorrect to assume that
337 * the first interface in that descriptor corresponds to interface zero.
338 * This routine helps device drivers avoid such mistakes.
339 * However, you should make sure that you do the right thing with any
340 * alternate settings available for this interfaces.
341 *
342 * Don't call this function unless you are bound to one of the interfaces
343 * on this device or you have locked the device!
344 *
345 * Return: A pointer to the interface that has @ifnum as interface number,
346 * if found. %NULL otherwise.
347 */
348struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
349 unsigned ifnum)
350{
351 struct usb_host_config *config = dev->actconfig;
352 int i;
353
354 if (!config)
355 return NULL;
356 for (i = 0; i < config->desc.bNumInterfaces; i++)
357 if (config->interface[i]->altsetting[0]
358 .desc.bInterfaceNumber == ifnum)
359 return config->interface[i];
360
361 return NULL;
362}
363EXPORT_SYMBOL_GPL(usb_ifnum_to_if);
364
365/**
366 * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number.
367 * @intf: the interface containing the altsetting in question
368 * @altnum: the desired alternate setting number
369 *
370 * This searches the altsetting array of the specified interface for
371 * an entry with the correct bAlternateSetting value.
372 *
373 * Note that altsettings need not be stored sequentially by number, so
374 * it would be incorrect to assume that the first altsetting entry in
375 * the array corresponds to altsetting zero. This routine helps device
376 * drivers avoid such mistakes.
377 *
378 * Don't call this function unless you are bound to the intf interface
379 * or you have locked the device!
380 *
381 * Return: A pointer to the entry of the altsetting array of @intf that
382 * has @altnum as the alternate setting number. %NULL if not found.
383 */
384struct usb_host_interface *usb_altnum_to_altsetting(
385 const struct usb_interface *intf,
386 unsigned int altnum)
387{
388 int i;
389
390 for (i = 0; i < intf->num_altsetting; i++) {
391 if (intf->altsetting[i].desc.bAlternateSetting == altnum)
392 return &intf->altsetting[i];
393 }
394 return NULL;
395}
396EXPORT_SYMBOL_GPL(usb_altnum_to_altsetting);
397
398struct find_interface_arg {
399 int minor;
400 struct device_driver *drv;
401};
402
403static int __find_interface(struct device *dev, const void *data)
404{
405 const struct find_interface_arg *arg = data;
406 struct usb_interface *intf;
407
408 if (!is_usb_interface(dev))
409 return 0;
410
411 if (dev->driver != arg->drv)
412 return 0;
413 intf = to_usb_interface(dev);
414 return intf->minor == arg->minor;
415}
416
417/**
418 * usb_find_interface - find usb_interface pointer for driver and device
419 * @drv: the driver whose current configuration is considered
420 * @minor: the minor number of the desired device
421 *
422 * This walks the bus device list and returns a pointer to the interface
423 * with the matching minor and driver. Note, this only works for devices
424 * that share the USB major number.
425 *
426 * Return: A pointer to the interface with the matching major and @minor.
427 */
428struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor)
429{
430 struct find_interface_arg argb;
431 struct device *dev;
432
433 argb.minor = minor;
434 argb.drv = &drv->driver;
435
436 dev = bus_find_device(&usb_bus_type, NULL, &argb, __find_interface);
437
438 /* Drop reference count from bus_find_device */
439 put_device(dev);
440
441 return dev ? to_usb_interface(dev) : NULL;
442}
443EXPORT_SYMBOL_GPL(usb_find_interface);
444
445struct each_dev_arg {
446 void *data;
447 int (*fn)(struct usb_device *, void *);
448};
449
450static int __each_dev(struct device *dev, void *data)
451{
452 struct each_dev_arg *arg = (struct each_dev_arg *)data;
453
454 /* There are struct usb_interface on the same bus, filter them out */
455 if (!is_usb_device(dev))
456 return 0;
457
458 return arg->fn(to_usb_device(dev), arg->data);
459}
460
461/**
462 * usb_for_each_dev - iterate over all USB devices in the system
463 * @data: data pointer that will be handed to the callback function
464 * @fn: callback function to be called for each USB device
465 *
466 * Iterate over all USB devices and call @fn for each, passing it @data. If it
467 * returns anything other than 0, we break the iteration prematurely and return
468 * that value.
469 */
470int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *))
471{
472 struct each_dev_arg arg = {data, fn};
473
474 return bus_for_each_dev(&usb_bus_type, NULL, &arg, __each_dev);
475}
476EXPORT_SYMBOL_GPL(usb_for_each_dev);
477
478/**
479 * usb_release_dev - free a usb device structure when all users of it are finished.
480 * @dev: device that's been disconnected
481 *
482 * Will be called only by the device core when all users of this usb device are
483 * done.
484 */
485static void usb_release_dev(struct device *dev)
486{
487 struct usb_device *udev;
488 struct usb_hcd *hcd;
489
490 udev = to_usb_device(dev);
491 hcd = bus_to_hcd(udev->bus);
492
493 usb_destroy_configuration(udev);
494 usb_release_bos_descriptor(udev);
495 of_node_put(dev->of_node);
496 usb_put_hcd(hcd);
497 kfree(udev->product);
498 kfree(udev->manufacturer);
499 kfree(udev->serial);
500 kfree(udev);
501}
502
503static int usb_dev_uevent(const struct device *dev, struct kobj_uevent_env *env)
504{
505 const struct usb_device *usb_dev;
506
507 usb_dev = to_usb_device(dev);
508
509 if (add_uevent_var(env, "BUSNUM=%03d", usb_dev->bus->busnum))
510 return -ENOMEM;
511
512 if (add_uevent_var(env, "DEVNUM=%03d", usb_dev->devnum))
513 return -ENOMEM;
514
515 return 0;
516}
517
518#ifdef CONFIG_PM
519
520/* USB device Power-Management thunks.
521 * There's no need to distinguish here between quiescing a USB device
522 * and powering it down; the generic_suspend() routine takes care of
523 * it by skipping the usb_port_suspend() call for a quiesce. And for
524 * USB interfaces there's no difference at all.
525 */
526
527static int usb_dev_prepare(struct device *dev)
528{
529 return 0; /* Implement eventually? */
530}
531
532static void usb_dev_complete(struct device *dev)
533{
534 /* Currently used only for rebinding interfaces */
535 usb_resume_complete(dev);
536}
537
538static int usb_dev_suspend(struct device *dev)
539{
540 return usb_suspend(dev, PMSG_SUSPEND);
541}
542
543static int usb_dev_resume(struct device *dev)
544{
545 return usb_resume(dev, PMSG_RESUME);
546}
547
548static int usb_dev_freeze(struct device *dev)
549{
550 return usb_suspend(dev, PMSG_FREEZE);
551}
552
553static int usb_dev_thaw(struct device *dev)
554{
555 return usb_resume(dev, PMSG_THAW);
556}
557
558static int usb_dev_poweroff(struct device *dev)
559{
560 return usb_suspend(dev, PMSG_HIBERNATE);
561}
562
563static int usb_dev_restore(struct device *dev)
564{
565 return usb_resume(dev, PMSG_RESTORE);
566}
567
568static const struct dev_pm_ops usb_device_pm_ops = {
569 .prepare = usb_dev_prepare,
570 .complete = usb_dev_complete,
571 .suspend = usb_dev_suspend,
572 .resume = usb_dev_resume,
573 .freeze = usb_dev_freeze,
574 .thaw = usb_dev_thaw,
575 .poweroff = usb_dev_poweroff,
576 .restore = usb_dev_restore,
577 .runtime_suspend = usb_runtime_suspend,
578 .runtime_resume = usb_runtime_resume,
579 .runtime_idle = usb_runtime_idle,
580};
581
582#endif /* CONFIG_PM */
583
584
585static char *usb_devnode(const struct device *dev,
586 umode_t *mode, kuid_t *uid, kgid_t *gid)
587{
588 const struct usb_device *usb_dev;
589
590 usb_dev = to_usb_device(dev);
591 return kasprintf(GFP_KERNEL, "bus/usb/%03d/%03d",
592 usb_dev->bus->busnum, usb_dev->devnum);
593}
594
595struct device_type usb_device_type = {
596 .name = "usb_device",
597 .release = usb_release_dev,
598 .uevent = usb_dev_uevent,
599 .devnode = usb_devnode,
600#ifdef CONFIG_PM
601 .pm = &usb_device_pm_ops,
602#endif
603};
604
605static bool usb_dev_authorized(struct usb_device *dev, struct usb_hcd *hcd)
606{
607 struct usb_hub *hub;
608
609 if (!dev->parent)
610 return true; /* Root hub always ok [and always wired] */
611
612 switch (hcd->dev_policy) {
613 case USB_DEVICE_AUTHORIZE_NONE:
614 default:
615 return false;
616
617 case USB_DEVICE_AUTHORIZE_ALL:
618 return true;
619
620 case USB_DEVICE_AUTHORIZE_INTERNAL:
621 hub = usb_hub_to_struct_hub(dev->parent);
622 return hub->ports[dev->portnum - 1]->connect_type ==
623 USB_PORT_CONNECT_TYPE_HARD_WIRED;
624 }
625}
626
627/**
628 * usb_alloc_dev - usb device constructor (usbcore-internal)
629 * @parent: hub to which device is connected; null to allocate a root hub
630 * @bus: bus used to access the device
631 * @port1: one-based index of port; ignored for root hubs
632 *
633 * Context: task context, might sleep.
634 *
635 * Only hub drivers (including virtual root hub drivers for host
636 * controllers) should ever call this.
637 *
638 * This call may not be used in a non-sleeping context.
639 *
640 * Return: On success, a pointer to the allocated usb device. %NULL on
641 * failure.
642 */
643struct usb_device *usb_alloc_dev(struct usb_device *parent,
644 struct usb_bus *bus, unsigned port1)
645{
646 struct usb_device *dev;
647 struct usb_hcd *usb_hcd = bus_to_hcd(bus);
648 unsigned raw_port = port1;
649
650 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
651 if (!dev)
652 return NULL;
653
654 if (!usb_get_hcd(usb_hcd)) {
655 kfree(dev);
656 return NULL;
657 }
658 /* Root hubs aren't true devices, so don't allocate HCD resources */
659 if (usb_hcd->driver->alloc_dev && parent &&
660 !usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
661 usb_put_hcd(bus_to_hcd(bus));
662 kfree(dev);
663 return NULL;
664 }
665
666 device_initialize(&dev->dev);
667 dev->dev.bus = &usb_bus_type;
668 dev->dev.type = &usb_device_type;
669 dev->dev.groups = usb_device_groups;
670 set_dev_node(&dev->dev, dev_to_node(bus->sysdev));
671 dev->state = USB_STATE_ATTACHED;
672 dev->lpm_disable_count = 1;
673 atomic_set(&dev->urbnum, 0);
674
675 INIT_LIST_HEAD(&dev->ep0.urb_list);
676 dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
677 dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
678 /* ep0 maxpacket comes later, from device descriptor */
679 usb_enable_endpoint(dev, &dev->ep0, false);
680 dev->can_submit = 1;
681
682 /* Save readable and stable topology id, distinguishing devices
683 * by location for diagnostics, tools, driver model, etc. The
684 * string is a path along hub ports, from the root. Each device's
685 * dev->devpath will be stable until USB is re-cabled, and hubs
686 * are often labeled with these port numbers. The name isn't
687 * as stable: bus->busnum changes easily from modprobe order,
688 * cardbus or pci hotplugging, and so on.
689 */
690 if (unlikely(!parent)) {
691 dev->devpath[0] = '0';
692 dev->route = 0;
693
694 dev->dev.parent = bus->controller;
695 device_set_of_node_from_dev(&dev->dev, bus->sysdev);
696 dev_set_name(&dev->dev, "usb%d", bus->busnum);
697 } else {
698 /* match any labeling on the hubs; it's one-based */
699 if (parent->devpath[0] == '0') {
700 snprintf(dev->devpath, sizeof dev->devpath,
701 "%d", port1);
702 /* Root ports are not counted in route string */
703 dev->route = 0;
704 } else {
705 snprintf(dev->devpath, sizeof dev->devpath,
706 "%s.%d", parent->devpath, port1);
707 /* Route string assumes hubs have less than 16 ports */
708 if (port1 < 15)
709 dev->route = parent->route +
710 (port1 << ((parent->level - 1)*4));
711 else
712 dev->route = parent->route +
713 (15 << ((parent->level - 1)*4));
714 }
715
716 dev->dev.parent = &parent->dev;
717 dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
718
719 if (!parent->parent) {
720 /* device under root hub's port */
721 raw_port = usb_hcd_find_raw_port_number(usb_hcd,
722 port1);
723 }
724 dev->dev.of_node = usb_of_get_device_node(parent, raw_port);
725
726 /* hub driver sets up TT records */
727 }
728
729 dev->portnum = port1;
730 dev->bus = bus;
731 dev->parent = parent;
732 INIT_LIST_HEAD(&dev->filelist);
733
734#ifdef CONFIG_PM
735 pm_runtime_set_autosuspend_delay(&dev->dev,
736 usb_autosuspend_delay * 1000);
737 dev->connect_time = jiffies;
738 dev->active_duration = -jiffies;
739#endif
740
741 dev->authorized = usb_dev_authorized(dev, usb_hcd);
742 return dev;
743}
744EXPORT_SYMBOL_GPL(usb_alloc_dev);
745
746/**
747 * usb_get_dev - increments the reference count of the usb device structure
748 * @dev: the device being referenced
749 *
750 * Each live reference to a device should be refcounted.
751 *
752 * Drivers for USB interfaces should normally record such references in
753 * their probe() methods, when they bind to an interface, and release
754 * them by calling usb_put_dev(), in their disconnect() methods.
755 * However, if a driver does not access the usb_device structure after
756 * its disconnect() method returns then refcounting is not necessary,
757 * because the USB core guarantees that a usb_device will not be
758 * deallocated until after all of its interface drivers have been unbound.
759 *
760 * Return: A pointer to the device with the incremented reference counter.
761 */
762struct usb_device *usb_get_dev(struct usb_device *dev)
763{
764 if (dev)
765 get_device(&dev->dev);
766 return dev;
767}
768EXPORT_SYMBOL_GPL(usb_get_dev);
769
770/**
771 * usb_put_dev - release a use of the usb device structure
772 * @dev: device that's been disconnected
773 *
774 * Must be called when a user of a device is finished with it. When the last
775 * user of the device calls this function, the memory of the device is freed.
776 */
777void usb_put_dev(struct usb_device *dev)
778{
779 if (dev)
780 put_device(&dev->dev);
781}
782EXPORT_SYMBOL_GPL(usb_put_dev);
783
784/**
785 * usb_get_intf - increments the reference count of the usb interface structure
786 * @intf: the interface being referenced
787 *
788 * Each live reference to a interface must be refcounted.
789 *
790 * Drivers for USB interfaces should normally record such references in
791 * their probe() methods, when they bind to an interface, and release
792 * them by calling usb_put_intf(), in their disconnect() methods.
793 * However, if a driver does not access the usb_interface structure after
794 * its disconnect() method returns then refcounting is not necessary,
795 * because the USB core guarantees that a usb_interface will not be
796 * deallocated until after its driver has been unbound.
797 *
798 * Return: A pointer to the interface with the incremented reference counter.
799 */
800struct usb_interface *usb_get_intf(struct usb_interface *intf)
801{
802 if (intf)
803 get_device(&intf->dev);
804 return intf;
805}
806EXPORT_SYMBOL_GPL(usb_get_intf);
807
808/**
809 * usb_put_intf - release a use of the usb interface structure
810 * @intf: interface that's been decremented
811 *
812 * Must be called when a user of an interface is finished with it. When the
813 * last user of the interface calls this function, the memory of the interface
814 * is freed.
815 */
816void usb_put_intf(struct usb_interface *intf)
817{
818 if (intf)
819 put_device(&intf->dev);
820}
821EXPORT_SYMBOL_GPL(usb_put_intf);
822
823/**
824 * usb_intf_get_dma_device - acquire a reference on the usb interface's DMA endpoint
825 * @intf: the usb interface
826 *
827 * While a USB device cannot perform DMA operations by itself, many USB
828 * controllers can. A call to usb_intf_get_dma_device() returns the DMA endpoint
829 * for the given USB interface, if any. The returned device structure must be
830 * released with put_device().
831 *
832 * See also usb_get_dma_device().
833 *
834 * Returns: A reference to the usb interface's DMA endpoint; or NULL if none
835 * exists.
836 */
837struct device *usb_intf_get_dma_device(struct usb_interface *intf)
838{
839 struct usb_device *udev = interface_to_usbdev(intf);
840 struct device *dmadev;
841
842 if (!udev->bus)
843 return NULL;
844
845 dmadev = get_device(udev->bus->sysdev);
846 if (!dmadev || !dmadev->dma_mask) {
847 put_device(dmadev);
848 return NULL;
849 }
850
851 return dmadev;
852}
853EXPORT_SYMBOL_GPL(usb_intf_get_dma_device);
854
855/* USB device locking
856 *
857 * USB devices and interfaces are locked using the semaphore in their
858 * embedded struct device. The hub driver guarantees that whenever a
859 * device is connected or disconnected, drivers are called with the
860 * USB device locked as well as their particular interface.
861 *
862 * Complications arise when several devices are to be locked at the same
863 * time. Only hub-aware drivers that are part of usbcore ever have to
864 * do this; nobody else needs to worry about it. The rule for locking
865 * is simple:
866 *
867 * When locking both a device and its parent, always lock the
868 * parent first.
869 */
870
871/**
872 * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure
873 * @udev: device that's being locked
874 * @iface: interface bound to the driver making the request (optional)
875 *
876 * Attempts to acquire the device lock, but fails if the device is
877 * NOTATTACHED or SUSPENDED, or if iface is specified and the interface
878 * is neither BINDING nor BOUND. Rather than sleeping to wait for the
879 * lock, the routine polls repeatedly. This is to prevent deadlock with
880 * disconnect; in some drivers (such as usb-storage) the disconnect()
881 * or suspend() method will block waiting for a device reset to complete.
882 *
883 * Return: A negative error code for failure, otherwise 0.
884 */
885int usb_lock_device_for_reset(struct usb_device *udev,
886 const struct usb_interface *iface)
887{
888 unsigned long jiffies_expire = jiffies + HZ;
889
890 if (udev->state == USB_STATE_NOTATTACHED)
891 return -ENODEV;
892 if (udev->state == USB_STATE_SUSPENDED)
893 return -EHOSTUNREACH;
894 if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
895 iface->condition == USB_INTERFACE_UNBOUND))
896 return -EINTR;
897
898 while (!usb_trylock_device(udev)) {
899
900 /* If we can't acquire the lock after waiting one second,
901 * we're probably deadlocked */
902 if (time_after(jiffies, jiffies_expire))
903 return -EBUSY;
904
905 msleep(15);
906 if (udev->state == USB_STATE_NOTATTACHED)
907 return -ENODEV;
908 if (udev->state == USB_STATE_SUSPENDED)
909 return -EHOSTUNREACH;
910 if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
911 iface->condition == USB_INTERFACE_UNBOUND))
912 return -EINTR;
913 }
914 return 0;
915}
916EXPORT_SYMBOL_GPL(usb_lock_device_for_reset);
917
918/**
919 * usb_get_current_frame_number - return current bus frame number
920 * @dev: the device whose bus is being queried
921 *
922 * Return: The current frame number for the USB host controller used
923 * with the given USB device. This can be used when scheduling
924 * isochronous requests.
925 *
926 * Note: Different kinds of host controller have different "scheduling
927 * horizons". While one type might support scheduling only 32 frames
928 * into the future, others could support scheduling up to 1024 frames
929 * into the future.
930 *
931 */
932int usb_get_current_frame_number(struct usb_device *dev)
933{
934 return usb_hcd_get_frame_number(dev);
935}
936EXPORT_SYMBOL_GPL(usb_get_current_frame_number);
937
938/*-------------------------------------------------------------------*/
939/*
940 * __usb_get_extra_descriptor() finds a descriptor of specific type in the
941 * extra field of the interface and endpoint descriptor structs.
942 */
943
944int __usb_get_extra_descriptor(char *buffer, unsigned size,
945 unsigned char type, void **ptr, size_t minsize)
946{
947 struct usb_descriptor_header *header;
948
949 while (size >= sizeof(struct usb_descriptor_header)) {
950 header = (struct usb_descriptor_header *)buffer;
951
952 if (header->bLength < 2 || header->bLength > size) {
953 printk(KERN_ERR
954 "%s: bogus descriptor, type %d length %d\n",
955 usbcore_name,
956 header->bDescriptorType,
957 header->bLength);
958 return -1;
959 }
960
961 if (header->bDescriptorType == type && header->bLength >= minsize) {
962 *ptr = header;
963 return 0;
964 }
965
966 buffer += header->bLength;
967 size -= header->bLength;
968 }
969 return -1;
970}
971EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor);
972
973/**
974 * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
975 * @dev: device the buffer will be used with
976 * @size: requested buffer size
977 * @mem_flags: affect whether allocation may block
978 * @dma: used to return DMA address of buffer
979 *
980 * Return: Either null (indicating no buffer could be allocated), or the
981 * cpu-space pointer to a buffer that may be used to perform DMA to the
982 * specified device. Such cpu-space buffers are returned along with the DMA
983 * address (through the pointer provided).
984 *
985 * Note:
986 * These buffers are used with URB_NO_xxx_DMA_MAP set in urb->transfer_flags
987 * to avoid behaviors like using "DMA bounce buffers", or thrashing IOMMU
988 * hardware during URB completion/resubmit. The implementation varies between
989 * platforms, depending on details of how DMA will work to this device.
990 * Using these buffers also eliminates cacheline sharing problems on
991 * architectures where CPU caches are not DMA-coherent. On systems without
992 * bus-snooping caches, these buffers are uncached.
993 *
994 * When the buffer is no longer used, free it with usb_free_coherent().
995 */
996void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags,
997 dma_addr_t *dma)
998{
999 if (!dev || !dev->bus)
1000 return NULL;
1001 return hcd_buffer_alloc(dev->bus, size, mem_flags, dma);
1002}
1003EXPORT_SYMBOL_GPL(usb_alloc_coherent);
1004
1005/**
1006 * usb_free_coherent - free memory allocated with usb_alloc_coherent()
1007 * @dev: device the buffer was used with
1008 * @size: requested buffer size
1009 * @addr: CPU address of buffer
1010 * @dma: DMA address of buffer
1011 *
1012 * This reclaims an I/O buffer, letting it be reused. The memory must have
1013 * been allocated using usb_alloc_coherent(), and the parameters must match
1014 * those provided in that allocation request.
1015 */
1016void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
1017 dma_addr_t dma)
1018{
1019 if (!dev || !dev->bus)
1020 return;
1021 if (!addr)
1022 return;
1023 hcd_buffer_free(dev->bus, size, addr, dma);
1024}
1025EXPORT_SYMBOL_GPL(usb_free_coherent);
1026
1027/*
1028 * Notifications of device and interface registration
1029 */
1030static int usb_bus_notify(struct notifier_block *nb, unsigned long action,
1031 void *data)
1032{
1033 struct device *dev = data;
1034
1035 switch (action) {
1036 case BUS_NOTIFY_ADD_DEVICE:
1037 if (dev->type == &usb_device_type)
1038 (void) usb_create_sysfs_dev_files(to_usb_device(dev));
1039 else if (dev->type == &usb_if_device_type)
1040 usb_create_sysfs_intf_files(to_usb_interface(dev));
1041 break;
1042
1043 case BUS_NOTIFY_DEL_DEVICE:
1044 if (dev->type == &usb_device_type)
1045 usb_remove_sysfs_dev_files(to_usb_device(dev));
1046 else if (dev->type == &usb_if_device_type)
1047 usb_remove_sysfs_intf_files(to_usb_interface(dev));
1048 break;
1049 }
1050 return 0;
1051}
1052
1053static struct notifier_block usb_bus_nb = {
1054 .notifier_call = usb_bus_notify,
1055};
1056
1057static void usb_debugfs_init(void)
1058{
1059 debugfs_create_file("devices", 0444, usb_debug_root, NULL,
1060 &usbfs_devices_fops);
1061}
1062
1063static void usb_debugfs_cleanup(void)
1064{
1065 debugfs_lookup_and_remove("devices", usb_debug_root);
1066}
1067
1068/*
1069 * Init
1070 */
1071static int __init usb_init(void)
1072{
1073 int retval;
1074 if (usb_disabled()) {
1075 pr_info("%s: USB support disabled\n", usbcore_name);
1076 return 0;
1077 }
1078 usb_init_pool_max();
1079
1080 usb_debugfs_init();
1081
1082 usb_acpi_register();
1083 retval = bus_register(&usb_bus_type);
1084 if (retval)
1085 goto bus_register_failed;
1086 retval = bus_register_notifier(&usb_bus_type, &usb_bus_nb);
1087 if (retval)
1088 goto bus_notifier_failed;
1089 retval = usb_major_init();
1090 if (retval)
1091 goto major_init_failed;
1092 retval = class_register(&usbmisc_class);
1093 if (retval)
1094 goto class_register_failed;
1095 retval = usb_register(&usbfs_driver);
1096 if (retval)
1097 goto driver_register_failed;
1098 retval = usb_devio_init();
1099 if (retval)
1100 goto usb_devio_init_failed;
1101 retval = usb_hub_init();
1102 if (retval)
1103 goto hub_init_failed;
1104 retval = usb_register_device_driver(&usb_generic_driver, THIS_MODULE);
1105 if (!retval)
1106 goto out;
1107
1108 usb_hub_cleanup();
1109hub_init_failed:
1110 usb_devio_cleanup();
1111usb_devio_init_failed:
1112 usb_deregister(&usbfs_driver);
1113driver_register_failed:
1114 class_unregister(&usbmisc_class);
1115class_register_failed:
1116 usb_major_cleanup();
1117major_init_failed:
1118 bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
1119bus_notifier_failed:
1120 bus_unregister(&usb_bus_type);
1121bus_register_failed:
1122 usb_acpi_unregister();
1123 usb_debugfs_cleanup();
1124out:
1125 return retval;
1126}
1127
1128/*
1129 * Cleanup
1130 */
1131static void __exit usb_exit(void)
1132{
1133 /* This will matter if shutdown/reboot does exitcalls. */
1134 if (usb_disabled())
1135 return;
1136
1137 usb_release_quirk_list();
1138 usb_deregister_device_driver(&usb_generic_driver);
1139 usb_major_cleanup();
1140 usb_deregister(&usbfs_driver);
1141 usb_devio_cleanup();
1142 usb_hub_cleanup();
1143 class_unregister(&usbmisc_class);
1144 bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
1145 bus_unregister(&usb_bus_type);
1146 usb_acpi_unregister();
1147 usb_debugfs_cleanup();
1148 idr_destroy(&usb_bus_idr);
1149}
1150
1151subsys_initcall(usb_init);
1152module_exit(usb_exit);
1153MODULE_LICENSE("GPL");
1/*
2 * drivers/usb/core/usb.c
3 *
4 * (C) Copyright Linus Torvalds 1999
5 * (C) Copyright Johannes Erdfelt 1999-2001
6 * (C) Copyright Andreas Gal 1999
7 * (C) Copyright Gregory P. Smith 1999
8 * (C) Copyright Deti Fliegl 1999 (new USB architecture)
9 * (C) Copyright Randy Dunlap 2000
10 * (C) Copyright David Brownell 2000-2004
11 * (C) Copyright Yggdrasil Computing, Inc. 2000
12 * (usb_device_id matching changes by Adam J. Richter)
13 * (C) Copyright Greg Kroah-Hartman 2002-2003
14 *
15 * NOTE! This is not actually a driver at all, rather this is
16 * just a collection of helper routines that implement the
17 * generic USB things that the real drivers can use..
18 *
19 * Think of this as a "USB library" rather than anything else.
20 * It should be considered a slave, with no callbacks. Callbacks
21 * are evil.
22 */
23
24#include <linux/module.h>
25#include <linux/moduleparam.h>
26#include <linux/string.h>
27#include <linux/bitops.h>
28#include <linux/slab.h>
29#include <linux/interrupt.h> /* for in_interrupt() */
30#include <linux/kmod.h>
31#include <linux/init.h>
32#include <linux/spinlock.h>
33#include <linux/errno.h>
34#include <linux/usb.h>
35#include <linux/usb/hcd.h>
36#include <linux/mutex.h>
37#include <linux/workqueue.h>
38#include <linux/debugfs.h>
39
40#include <asm/io.h>
41#include <linux/scatterlist.h>
42#include <linux/mm.h>
43#include <linux/dma-mapping.h>
44
45#include "usb.h"
46
47
48const char *usbcore_name = "usbcore";
49
50static int nousb; /* Disable USB when built into kernel image */
51
52#ifdef CONFIG_USB_SUSPEND
53static int usb_autosuspend_delay = 2; /* Default delay value,
54 * in seconds */
55module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
56MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
57
58#else
59#define usb_autosuspend_delay 0
60#endif
61
62
63/**
64 * usb_find_alt_setting() - Given a configuration, find the alternate setting
65 * for the given interface.
66 * @config: the configuration to search (not necessarily the current config).
67 * @iface_num: interface number to search in
68 * @alt_num: alternate interface setting number to search for.
69 *
70 * Search the configuration's interface cache for the given alt setting.
71 */
72struct usb_host_interface *usb_find_alt_setting(
73 struct usb_host_config *config,
74 unsigned int iface_num,
75 unsigned int alt_num)
76{
77 struct usb_interface_cache *intf_cache = NULL;
78 int i;
79
80 for (i = 0; i < config->desc.bNumInterfaces; i++) {
81 if (config->intf_cache[i]->altsetting[0].desc.bInterfaceNumber
82 == iface_num) {
83 intf_cache = config->intf_cache[i];
84 break;
85 }
86 }
87 if (!intf_cache)
88 return NULL;
89 for (i = 0; i < intf_cache->num_altsetting; i++)
90 if (intf_cache->altsetting[i].desc.bAlternateSetting == alt_num)
91 return &intf_cache->altsetting[i];
92
93 printk(KERN_DEBUG "Did not find alt setting %u for intf %u, "
94 "config %u\n", alt_num, iface_num,
95 config->desc.bConfigurationValue);
96 return NULL;
97}
98EXPORT_SYMBOL_GPL(usb_find_alt_setting);
99
100/**
101 * usb_ifnum_to_if - get the interface object with a given interface number
102 * @dev: the device whose current configuration is considered
103 * @ifnum: the desired interface
104 *
105 * This walks the device descriptor for the currently active configuration
106 * and returns a pointer to the interface with that particular interface
107 * number, or null.
108 *
109 * Note that configuration descriptors are not required to assign interface
110 * numbers sequentially, so that it would be incorrect to assume that
111 * the first interface in that descriptor corresponds to interface zero.
112 * This routine helps device drivers avoid such mistakes.
113 * However, you should make sure that you do the right thing with any
114 * alternate settings available for this interfaces.
115 *
116 * Don't call this function unless you are bound to one of the interfaces
117 * on this device or you have locked the device!
118 */
119struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
120 unsigned ifnum)
121{
122 struct usb_host_config *config = dev->actconfig;
123 int i;
124
125 if (!config)
126 return NULL;
127 for (i = 0; i < config->desc.bNumInterfaces; i++)
128 if (config->interface[i]->altsetting[0]
129 .desc.bInterfaceNumber == ifnum)
130 return config->interface[i];
131
132 return NULL;
133}
134EXPORT_SYMBOL_GPL(usb_ifnum_to_if);
135
136/**
137 * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number.
138 * @intf: the interface containing the altsetting in question
139 * @altnum: the desired alternate setting number
140 *
141 * This searches the altsetting array of the specified interface for
142 * an entry with the correct bAlternateSetting value and returns a pointer
143 * to that entry, or null.
144 *
145 * Note that altsettings need not be stored sequentially by number, so
146 * it would be incorrect to assume that the first altsetting entry in
147 * the array corresponds to altsetting zero. This routine helps device
148 * drivers avoid such mistakes.
149 *
150 * Don't call this function unless you are bound to the intf interface
151 * or you have locked the device!
152 */
153struct usb_host_interface *usb_altnum_to_altsetting(
154 const struct usb_interface *intf,
155 unsigned int altnum)
156{
157 int i;
158
159 for (i = 0; i < intf->num_altsetting; i++) {
160 if (intf->altsetting[i].desc.bAlternateSetting == altnum)
161 return &intf->altsetting[i];
162 }
163 return NULL;
164}
165EXPORT_SYMBOL_GPL(usb_altnum_to_altsetting);
166
167struct find_interface_arg {
168 int minor;
169 struct device_driver *drv;
170};
171
172static int __find_interface(struct device *dev, void *data)
173{
174 struct find_interface_arg *arg = data;
175 struct usb_interface *intf;
176
177 if (!is_usb_interface(dev))
178 return 0;
179
180 if (dev->driver != arg->drv)
181 return 0;
182 intf = to_usb_interface(dev);
183 return intf->minor == arg->minor;
184}
185
186/**
187 * usb_find_interface - find usb_interface pointer for driver and device
188 * @drv: the driver whose current configuration is considered
189 * @minor: the minor number of the desired device
190 *
191 * This walks the bus device list and returns a pointer to the interface
192 * with the matching minor and driver. Note, this only works for devices
193 * that share the USB major number.
194 */
195struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor)
196{
197 struct find_interface_arg argb;
198 struct device *dev;
199
200 argb.minor = minor;
201 argb.drv = &drv->drvwrap.driver;
202
203 dev = bus_find_device(&usb_bus_type, NULL, &argb, __find_interface);
204
205 /* Drop reference count from bus_find_device */
206 put_device(dev);
207
208 return dev ? to_usb_interface(dev) : NULL;
209}
210EXPORT_SYMBOL_GPL(usb_find_interface);
211
212/**
213 * usb_release_dev - free a usb device structure when all users of it are finished.
214 * @dev: device that's been disconnected
215 *
216 * Will be called only by the device core when all users of this usb device are
217 * done.
218 */
219static void usb_release_dev(struct device *dev)
220{
221 struct usb_device *udev;
222 struct usb_hcd *hcd;
223
224 udev = to_usb_device(dev);
225 hcd = bus_to_hcd(udev->bus);
226
227 usb_destroy_configuration(udev);
228 usb_put_hcd(hcd);
229 kfree(udev->product);
230 kfree(udev->manufacturer);
231 kfree(udev->serial);
232 kfree(udev);
233}
234
235#ifdef CONFIG_HOTPLUG
236static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
237{
238 struct usb_device *usb_dev;
239
240 usb_dev = to_usb_device(dev);
241
242 if (add_uevent_var(env, "BUSNUM=%03d", usb_dev->bus->busnum))
243 return -ENOMEM;
244
245 if (add_uevent_var(env, "DEVNUM=%03d", usb_dev->devnum))
246 return -ENOMEM;
247
248 return 0;
249}
250
251#else
252
253static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
254{
255 return -ENODEV;
256}
257#endif /* CONFIG_HOTPLUG */
258
259#ifdef CONFIG_PM
260
261/* USB device Power-Management thunks.
262 * There's no need to distinguish here between quiescing a USB device
263 * and powering it down; the generic_suspend() routine takes care of
264 * it by skipping the usb_port_suspend() call for a quiesce. And for
265 * USB interfaces there's no difference at all.
266 */
267
268static int usb_dev_prepare(struct device *dev)
269{
270 return 0; /* Implement eventually? */
271}
272
273static void usb_dev_complete(struct device *dev)
274{
275 /* Currently used only for rebinding interfaces */
276 usb_resume(dev, PMSG_ON); /* FIXME: change to PMSG_COMPLETE */
277}
278
279static int usb_dev_suspend(struct device *dev)
280{
281 return usb_suspend(dev, PMSG_SUSPEND);
282}
283
284static int usb_dev_resume(struct device *dev)
285{
286 return usb_resume(dev, PMSG_RESUME);
287}
288
289static int usb_dev_freeze(struct device *dev)
290{
291 return usb_suspend(dev, PMSG_FREEZE);
292}
293
294static int usb_dev_thaw(struct device *dev)
295{
296 return usb_resume(dev, PMSG_THAW);
297}
298
299static int usb_dev_poweroff(struct device *dev)
300{
301 return usb_suspend(dev, PMSG_HIBERNATE);
302}
303
304static int usb_dev_restore(struct device *dev)
305{
306 return usb_resume(dev, PMSG_RESTORE);
307}
308
309static const struct dev_pm_ops usb_device_pm_ops = {
310 .prepare = usb_dev_prepare,
311 .complete = usb_dev_complete,
312 .suspend = usb_dev_suspend,
313 .resume = usb_dev_resume,
314 .freeze = usb_dev_freeze,
315 .thaw = usb_dev_thaw,
316 .poweroff = usb_dev_poweroff,
317 .restore = usb_dev_restore,
318#ifdef CONFIG_USB_SUSPEND
319 .runtime_suspend = usb_runtime_suspend,
320 .runtime_resume = usb_runtime_resume,
321 .runtime_idle = usb_runtime_idle,
322#endif
323};
324
325#endif /* CONFIG_PM */
326
327
328static char *usb_devnode(struct device *dev, mode_t *mode)
329{
330 struct usb_device *usb_dev;
331
332 usb_dev = to_usb_device(dev);
333 return kasprintf(GFP_KERNEL, "bus/usb/%03d/%03d",
334 usb_dev->bus->busnum, usb_dev->devnum);
335}
336
337struct device_type usb_device_type = {
338 .name = "usb_device",
339 .release = usb_release_dev,
340 .uevent = usb_dev_uevent,
341 .devnode = usb_devnode,
342#ifdef CONFIG_PM
343 .pm = &usb_device_pm_ops,
344#endif
345};
346
347
348/* Returns 1 if @usb_bus is WUSB, 0 otherwise */
349static unsigned usb_bus_is_wusb(struct usb_bus *bus)
350{
351 struct usb_hcd *hcd = container_of(bus, struct usb_hcd, self);
352 return hcd->wireless;
353}
354
355
356/**
357 * usb_alloc_dev - usb device constructor (usbcore-internal)
358 * @parent: hub to which device is connected; null to allocate a root hub
359 * @bus: bus used to access the device
360 * @port1: one-based index of port; ignored for root hubs
361 * Context: !in_interrupt()
362 *
363 * Only hub drivers (including virtual root hub drivers for host
364 * controllers) should ever call this.
365 *
366 * This call may not be used in a non-sleeping context.
367 */
368struct usb_device *usb_alloc_dev(struct usb_device *parent,
369 struct usb_bus *bus, unsigned port1)
370{
371 struct usb_device *dev;
372 struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
373 unsigned root_hub = 0;
374
375 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
376 if (!dev)
377 return NULL;
378
379 if (!usb_get_hcd(bus_to_hcd(bus))) {
380 kfree(dev);
381 return NULL;
382 }
383 /* Root hubs aren't true devices, so don't allocate HCD resources */
384 if (usb_hcd->driver->alloc_dev && parent &&
385 !usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
386 usb_put_hcd(bus_to_hcd(bus));
387 kfree(dev);
388 return NULL;
389 }
390
391 device_initialize(&dev->dev);
392 dev->dev.bus = &usb_bus_type;
393 dev->dev.type = &usb_device_type;
394 dev->dev.groups = usb_device_groups;
395 dev->dev.dma_mask = bus->controller->dma_mask;
396 set_dev_node(&dev->dev, dev_to_node(bus->controller));
397 dev->state = USB_STATE_ATTACHED;
398 atomic_set(&dev->urbnum, 0);
399
400 INIT_LIST_HEAD(&dev->ep0.urb_list);
401 dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
402 dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
403 /* ep0 maxpacket comes later, from device descriptor */
404 usb_enable_endpoint(dev, &dev->ep0, false);
405 dev->can_submit = 1;
406
407 /* Save readable and stable topology id, distinguishing devices
408 * by location for diagnostics, tools, driver model, etc. The
409 * string is a path along hub ports, from the root. Each device's
410 * dev->devpath will be stable until USB is re-cabled, and hubs
411 * are often labeled with these port numbers. The name isn't
412 * as stable: bus->busnum changes easily from modprobe order,
413 * cardbus or pci hotplugging, and so on.
414 */
415 if (unlikely(!parent)) {
416 dev->devpath[0] = '0';
417 dev->route = 0;
418
419 dev->dev.parent = bus->controller;
420 dev_set_name(&dev->dev, "usb%d", bus->busnum);
421 root_hub = 1;
422 } else {
423 /* match any labeling on the hubs; it's one-based */
424 if (parent->devpath[0] == '0') {
425 snprintf(dev->devpath, sizeof dev->devpath,
426 "%d", port1);
427 /* Root ports are not counted in route string */
428 dev->route = 0;
429 } else {
430 snprintf(dev->devpath, sizeof dev->devpath,
431 "%s.%d", parent->devpath, port1);
432 /* Route string assumes hubs have less than 16 ports */
433 if (port1 < 15)
434 dev->route = parent->route +
435 (port1 << ((parent->level - 1)*4));
436 else
437 dev->route = parent->route +
438 (15 << ((parent->level - 1)*4));
439 }
440
441 dev->dev.parent = &parent->dev;
442 dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
443
444 /* hub driver sets up TT records */
445 }
446
447 dev->portnum = port1;
448 dev->bus = bus;
449 dev->parent = parent;
450 INIT_LIST_HEAD(&dev->filelist);
451
452#ifdef CONFIG_PM
453 pm_runtime_set_autosuspend_delay(&dev->dev,
454 usb_autosuspend_delay * 1000);
455 dev->connect_time = jiffies;
456 dev->active_duration = -jiffies;
457#endif
458 if (root_hub) /* Root hub always ok [and always wired] */
459 dev->authorized = 1;
460 else {
461 dev->authorized = usb_hcd->authorized_default;
462 dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
463 }
464 return dev;
465}
466
467/**
468 * usb_get_dev - increments the reference count of the usb device structure
469 * @dev: the device being referenced
470 *
471 * Each live reference to a device should be refcounted.
472 *
473 * Drivers for USB interfaces should normally record such references in
474 * their probe() methods, when they bind to an interface, and release
475 * them by calling usb_put_dev(), in their disconnect() methods.
476 *
477 * A pointer to the device with the incremented reference counter is returned.
478 */
479struct usb_device *usb_get_dev(struct usb_device *dev)
480{
481 if (dev)
482 get_device(&dev->dev);
483 return dev;
484}
485EXPORT_SYMBOL_GPL(usb_get_dev);
486
487/**
488 * usb_put_dev - release a use of the usb device structure
489 * @dev: device that's been disconnected
490 *
491 * Must be called when a user of a device is finished with it. When the last
492 * user of the device calls this function, the memory of the device is freed.
493 */
494void usb_put_dev(struct usb_device *dev)
495{
496 if (dev)
497 put_device(&dev->dev);
498}
499EXPORT_SYMBOL_GPL(usb_put_dev);
500
501/**
502 * usb_get_intf - increments the reference count of the usb interface structure
503 * @intf: the interface being referenced
504 *
505 * Each live reference to a interface must be refcounted.
506 *
507 * Drivers for USB interfaces should normally record such references in
508 * their probe() methods, when they bind to an interface, and release
509 * them by calling usb_put_intf(), in their disconnect() methods.
510 *
511 * A pointer to the interface with the incremented reference counter is
512 * returned.
513 */
514struct usb_interface *usb_get_intf(struct usb_interface *intf)
515{
516 if (intf)
517 get_device(&intf->dev);
518 return intf;
519}
520EXPORT_SYMBOL_GPL(usb_get_intf);
521
522/**
523 * usb_put_intf - release a use of the usb interface structure
524 * @intf: interface that's been decremented
525 *
526 * Must be called when a user of an interface is finished with it. When the
527 * last user of the interface calls this function, the memory of the interface
528 * is freed.
529 */
530void usb_put_intf(struct usb_interface *intf)
531{
532 if (intf)
533 put_device(&intf->dev);
534}
535EXPORT_SYMBOL_GPL(usb_put_intf);
536
537/* USB device locking
538 *
539 * USB devices and interfaces are locked using the semaphore in their
540 * embedded struct device. The hub driver guarantees that whenever a
541 * device is connected or disconnected, drivers are called with the
542 * USB device locked as well as their particular interface.
543 *
544 * Complications arise when several devices are to be locked at the same
545 * time. Only hub-aware drivers that are part of usbcore ever have to
546 * do this; nobody else needs to worry about it. The rule for locking
547 * is simple:
548 *
549 * When locking both a device and its parent, always lock the
550 * the parent first.
551 */
552
553/**
554 * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure
555 * @udev: device that's being locked
556 * @iface: interface bound to the driver making the request (optional)
557 *
558 * Attempts to acquire the device lock, but fails if the device is
559 * NOTATTACHED or SUSPENDED, or if iface is specified and the interface
560 * is neither BINDING nor BOUND. Rather than sleeping to wait for the
561 * lock, the routine polls repeatedly. This is to prevent deadlock with
562 * disconnect; in some drivers (such as usb-storage) the disconnect()
563 * or suspend() method will block waiting for a device reset to complete.
564 *
565 * Returns a negative error code for failure, otherwise 0.
566 */
567int usb_lock_device_for_reset(struct usb_device *udev,
568 const struct usb_interface *iface)
569{
570 unsigned long jiffies_expire = jiffies + HZ;
571
572 if (udev->state == USB_STATE_NOTATTACHED)
573 return -ENODEV;
574 if (udev->state == USB_STATE_SUSPENDED)
575 return -EHOSTUNREACH;
576 if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
577 iface->condition == USB_INTERFACE_UNBOUND))
578 return -EINTR;
579
580 while (!usb_trylock_device(udev)) {
581
582 /* If we can't acquire the lock after waiting one second,
583 * we're probably deadlocked */
584 if (time_after(jiffies, jiffies_expire))
585 return -EBUSY;
586
587 msleep(15);
588 if (udev->state == USB_STATE_NOTATTACHED)
589 return -ENODEV;
590 if (udev->state == USB_STATE_SUSPENDED)
591 return -EHOSTUNREACH;
592 if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
593 iface->condition == USB_INTERFACE_UNBOUND))
594 return -EINTR;
595 }
596 return 0;
597}
598EXPORT_SYMBOL_GPL(usb_lock_device_for_reset);
599
600/**
601 * usb_get_current_frame_number - return current bus frame number
602 * @dev: the device whose bus is being queried
603 *
604 * Returns the current frame number for the USB host controller
605 * used with the given USB device. This can be used when scheduling
606 * isochronous requests.
607 *
608 * Note that different kinds of host controller have different
609 * "scheduling horizons". While one type might support scheduling only
610 * 32 frames into the future, others could support scheduling up to
611 * 1024 frames into the future.
612 */
613int usb_get_current_frame_number(struct usb_device *dev)
614{
615 return usb_hcd_get_frame_number(dev);
616}
617EXPORT_SYMBOL_GPL(usb_get_current_frame_number);
618
619/*-------------------------------------------------------------------*/
620/*
621 * __usb_get_extra_descriptor() finds a descriptor of specific type in the
622 * extra field of the interface and endpoint descriptor structs.
623 */
624
625int __usb_get_extra_descriptor(char *buffer, unsigned size,
626 unsigned char type, void **ptr)
627{
628 struct usb_descriptor_header *header;
629
630 while (size >= sizeof(struct usb_descriptor_header)) {
631 header = (struct usb_descriptor_header *)buffer;
632
633 if (header->bLength < 2) {
634 printk(KERN_ERR
635 "%s: bogus descriptor, type %d length %d\n",
636 usbcore_name,
637 header->bDescriptorType,
638 header->bLength);
639 return -1;
640 }
641
642 if (header->bDescriptorType == type) {
643 *ptr = header;
644 return 0;
645 }
646
647 buffer += header->bLength;
648 size -= header->bLength;
649 }
650 return -1;
651}
652EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor);
653
654/**
655 * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
656 * @dev: device the buffer will be used with
657 * @size: requested buffer size
658 * @mem_flags: affect whether allocation may block
659 * @dma: used to return DMA address of buffer
660 *
661 * Return value is either null (indicating no buffer could be allocated), or
662 * the cpu-space pointer to a buffer that may be used to perform DMA to the
663 * specified device. Such cpu-space buffers are returned along with the DMA
664 * address (through the pointer provided).
665 *
666 * These buffers are used with URB_NO_xxx_DMA_MAP set in urb->transfer_flags
667 * to avoid behaviors like using "DMA bounce buffers", or thrashing IOMMU
668 * hardware during URB completion/resubmit. The implementation varies between
669 * platforms, depending on details of how DMA will work to this device.
670 * Using these buffers also eliminates cacheline sharing problems on
671 * architectures where CPU caches are not DMA-coherent. On systems without
672 * bus-snooping caches, these buffers are uncached.
673 *
674 * When the buffer is no longer used, free it with usb_free_coherent().
675 */
676void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags,
677 dma_addr_t *dma)
678{
679 if (!dev || !dev->bus)
680 return NULL;
681 return hcd_buffer_alloc(dev->bus, size, mem_flags, dma);
682}
683EXPORT_SYMBOL_GPL(usb_alloc_coherent);
684
685/**
686 * usb_free_coherent - free memory allocated with usb_alloc_coherent()
687 * @dev: device the buffer was used with
688 * @size: requested buffer size
689 * @addr: CPU address of buffer
690 * @dma: DMA address of buffer
691 *
692 * This reclaims an I/O buffer, letting it be reused. The memory must have
693 * been allocated using usb_alloc_coherent(), and the parameters must match
694 * those provided in that allocation request.
695 */
696void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
697 dma_addr_t dma)
698{
699 if (!dev || !dev->bus)
700 return;
701 if (!addr)
702 return;
703 hcd_buffer_free(dev->bus, size, addr, dma);
704}
705EXPORT_SYMBOL_GPL(usb_free_coherent);
706
707/**
708 * usb_buffer_map - create DMA mapping(s) for an urb
709 * @urb: urb whose transfer_buffer/setup_packet will be mapped
710 *
711 * Return value is either null (indicating no buffer could be mapped), or
712 * the parameter. URB_NO_TRANSFER_DMA_MAP is
713 * added to urb->transfer_flags if the operation succeeds. If the device
714 * is connected to this system through a non-DMA controller, this operation
715 * always succeeds.
716 *
717 * This call would normally be used for an urb which is reused, perhaps
718 * as the target of a large periodic transfer, with usb_buffer_dmasync()
719 * calls to synchronize memory and dma state.
720 *
721 * Reverse the effect of this call with usb_buffer_unmap().
722 */
723#if 0
724struct urb *usb_buffer_map(struct urb *urb)
725{
726 struct usb_bus *bus;
727 struct device *controller;
728
729 if (!urb
730 || !urb->dev
731 || !(bus = urb->dev->bus)
732 || !(controller = bus->controller))
733 return NULL;
734
735 if (controller->dma_mask) {
736 urb->transfer_dma = dma_map_single(controller,
737 urb->transfer_buffer, urb->transfer_buffer_length,
738 usb_pipein(urb->pipe)
739 ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
740 /* FIXME generic api broken like pci, can't report errors */
741 /* if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; */
742 } else
743 urb->transfer_dma = ~0;
744 urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
745 return urb;
746}
747EXPORT_SYMBOL_GPL(usb_buffer_map);
748#endif /* 0 */
749
750/* XXX DISABLED, no users currently. If you wish to re-enable this
751 * XXX please determine whether the sync is to transfer ownership of
752 * XXX the buffer from device to cpu or vice verse, and thusly use the
753 * XXX appropriate _for_{cpu,device}() method. -DaveM
754 */
755#if 0
756
757/**
758 * usb_buffer_dmasync - synchronize DMA and CPU view of buffer(s)
759 * @urb: urb whose transfer_buffer/setup_packet will be synchronized
760 */
761void usb_buffer_dmasync(struct urb *urb)
762{
763 struct usb_bus *bus;
764 struct device *controller;
765
766 if (!urb
767 || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
768 || !urb->dev
769 || !(bus = urb->dev->bus)
770 || !(controller = bus->controller))
771 return;
772
773 if (controller->dma_mask) {
774 dma_sync_single_for_cpu(controller,
775 urb->transfer_dma, urb->transfer_buffer_length,
776 usb_pipein(urb->pipe)
777 ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
778 if (usb_pipecontrol(urb->pipe))
779 dma_sync_single_for_cpu(controller,
780 urb->setup_dma,
781 sizeof(struct usb_ctrlrequest),
782 DMA_TO_DEVICE);
783 }
784}
785EXPORT_SYMBOL_GPL(usb_buffer_dmasync);
786#endif
787
788/**
789 * usb_buffer_unmap - free DMA mapping(s) for an urb
790 * @urb: urb whose transfer_buffer will be unmapped
791 *
792 * Reverses the effect of usb_buffer_map().
793 */
794#if 0
795void usb_buffer_unmap(struct urb *urb)
796{
797 struct usb_bus *bus;
798 struct device *controller;
799
800 if (!urb
801 || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
802 || !urb->dev
803 || !(bus = urb->dev->bus)
804 || !(controller = bus->controller))
805 return;
806
807 if (controller->dma_mask) {
808 dma_unmap_single(controller,
809 urb->transfer_dma, urb->transfer_buffer_length,
810 usb_pipein(urb->pipe)
811 ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
812 }
813 urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP;
814}
815EXPORT_SYMBOL_GPL(usb_buffer_unmap);
816#endif /* 0 */
817
818#if 0
819/**
820 * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
821 * @dev: device to which the scatterlist will be mapped
822 * @is_in: mapping transfer direction
823 * @sg: the scatterlist to map
824 * @nents: the number of entries in the scatterlist
825 *
826 * Return value is either < 0 (indicating no buffers could be mapped), or
827 * the number of DMA mapping array entries in the scatterlist.
828 *
829 * The caller is responsible for placing the resulting DMA addresses from
830 * the scatterlist into URB transfer buffer pointers, and for setting the
831 * URB_NO_TRANSFER_DMA_MAP transfer flag in each of those URBs.
832 *
833 * Top I/O rates come from queuing URBs, instead of waiting for each one
834 * to complete before starting the next I/O. This is particularly easy
835 * to do with scatterlists. Just allocate and submit one URB for each DMA
836 * mapping entry returned, stopping on the first error or when all succeed.
837 * Better yet, use the usb_sg_*() calls, which do that (and more) for you.
838 *
839 * This call would normally be used when translating scatterlist requests,
840 * rather than usb_buffer_map(), since on some hardware (with IOMMUs) it
841 * may be able to coalesce mappings for improved I/O efficiency.
842 *
843 * Reverse the effect of this call with usb_buffer_unmap_sg().
844 */
845int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
846 struct scatterlist *sg, int nents)
847{
848 struct usb_bus *bus;
849 struct device *controller;
850
851 if (!dev
852 || !(bus = dev->bus)
853 || !(controller = bus->controller)
854 || !controller->dma_mask)
855 return -EINVAL;
856
857 /* FIXME generic api broken like pci, can't report errors */
858 return dma_map_sg(controller, sg, nents,
859 is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM;
860}
861EXPORT_SYMBOL_GPL(usb_buffer_map_sg);
862#endif
863
864/* XXX DISABLED, no users currently. If you wish to re-enable this
865 * XXX please determine whether the sync is to transfer ownership of
866 * XXX the buffer from device to cpu or vice verse, and thusly use the
867 * XXX appropriate _for_{cpu,device}() method. -DaveM
868 */
869#if 0
870
871/**
872 * usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s)
873 * @dev: device to which the scatterlist will be mapped
874 * @is_in: mapping transfer direction
875 * @sg: the scatterlist to synchronize
876 * @n_hw_ents: the positive return value from usb_buffer_map_sg
877 *
878 * Use this when you are re-using a scatterlist's data buffers for
879 * another USB request.
880 */
881void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
882 struct scatterlist *sg, int n_hw_ents)
883{
884 struct usb_bus *bus;
885 struct device *controller;
886
887 if (!dev
888 || !(bus = dev->bus)
889 || !(controller = bus->controller)
890 || !controller->dma_mask)
891 return;
892
893 dma_sync_sg_for_cpu(controller, sg, n_hw_ents,
894 is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
895}
896EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg);
897#endif
898
899#if 0
900/**
901 * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
902 * @dev: device to which the scatterlist will be mapped
903 * @is_in: mapping transfer direction
904 * @sg: the scatterlist to unmap
905 * @n_hw_ents: the positive return value from usb_buffer_map_sg
906 *
907 * Reverses the effect of usb_buffer_map_sg().
908 */
909void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
910 struct scatterlist *sg, int n_hw_ents)
911{
912 struct usb_bus *bus;
913 struct device *controller;
914
915 if (!dev
916 || !(bus = dev->bus)
917 || !(controller = bus->controller)
918 || !controller->dma_mask)
919 return;
920
921 dma_unmap_sg(controller, sg, n_hw_ents,
922 is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
923}
924EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg);
925#endif
926
927/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */
928#ifdef MODULE
929module_param(nousb, bool, 0444);
930#else
931core_param(nousb, nousb, bool, 0444);
932#endif
933
934/*
935 * for external read access to <nousb>
936 */
937int usb_disabled(void)
938{
939 return nousb;
940}
941EXPORT_SYMBOL_GPL(usb_disabled);
942
943/*
944 * Notifications of device and interface registration
945 */
946static int usb_bus_notify(struct notifier_block *nb, unsigned long action,
947 void *data)
948{
949 struct device *dev = data;
950
951 switch (action) {
952 case BUS_NOTIFY_ADD_DEVICE:
953 if (dev->type == &usb_device_type)
954 (void) usb_create_sysfs_dev_files(to_usb_device(dev));
955 else if (dev->type == &usb_if_device_type)
956 usb_create_sysfs_intf_files(to_usb_interface(dev));
957 break;
958
959 case BUS_NOTIFY_DEL_DEVICE:
960 if (dev->type == &usb_device_type)
961 usb_remove_sysfs_dev_files(to_usb_device(dev));
962 else if (dev->type == &usb_if_device_type)
963 usb_remove_sysfs_intf_files(to_usb_interface(dev));
964 break;
965 }
966 return 0;
967}
968
969static struct notifier_block usb_bus_nb = {
970 .notifier_call = usb_bus_notify,
971};
972
973struct dentry *usb_debug_root;
974EXPORT_SYMBOL_GPL(usb_debug_root);
975
976static struct dentry *usb_debug_devices;
977
978static int usb_debugfs_init(void)
979{
980 usb_debug_root = debugfs_create_dir("usb", NULL);
981 if (!usb_debug_root)
982 return -ENOENT;
983
984 usb_debug_devices = debugfs_create_file("devices", 0444,
985 usb_debug_root, NULL,
986 &usbfs_devices_fops);
987 if (!usb_debug_devices) {
988 debugfs_remove(usb_debug_root);
989 usb_debug_root = NULL;
990 return -ENOENT;
991 }
992
993 return 0;
994}
995
996static void usb_debugfs_cleanup(void)
997{
998 debugfs_remove(usb_debug_devices);
999 debugfs_remove(usb_debug_root);
1000}
1001
1002/*
1003 * Init
1004 */
1005static int __init usb_init(void)
1006{
1007 int retval;
1008 if (nousb) {
1009 pr_info("%s: USB support disabled\n", usbcore_name);
1010 return 0;
1011 }
1012
1013 retval = usb_debugfs_init();
1014 if (retval)
1015 goto out;
1016
1017 retval = bus_register(&usb_bus_type);
1018 if (retval)
1019 goto bus_register_failed;
1020 retval = bus_register_notifier(&usb_bus_type, &usb_bus_nb);
1021 if (retval)
1022 goto bus_notifier_failed;
1023 retval = usb_major_init();
1024 if (retval)
1025 goto major_init_failed;
1026 retval = usb_register(&usbfs_driver);
1027 if (retval)
1028 goto driver_register_failed;
1029 retval = usb_devio_init();
1030 if (retval)
1031 goto usb_devio_init_failed;
1032 retval = usbfs_init();
1033 if (retval)
1034 goto fs_init_failed;
1035 retval = usb_hub_init();
1036 if (retval)
1037 goto hub_init_failed;
1038 retval = usb_register_device_driver(&usb_generic_driver, THIS_MODULE);
1039 if (!retval)
1040 goto out;
1041
1042 usb_hub_cleanup();
1043hub_init_failed:
1044 usbfs_cleanup();
1045fs_init_failed:
1046 usb_devio_cleanup();
1047usb_devio_init_failed:
1048 usb_deregister(&usbfs_driver);
1049driver_register_failed:
1050 usb_major_cleanup();
1051major_init_failed:
1052 bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
1053bus_notifier_failed:
1054 bus_unregister(&usb_bus_type);
1055bus_register_failed:
1056 usb_debugfs_cleanup();
1057out:
1058 return retval;
1059}
1060
1061/*
1062 * Cleanup
1063 */
1064static void __exit usb_exit(void)
1065{
1066 /* This will matter if shutdown/reboot does exitcalls. */
1067 if (nousb)
1068 return;
1069
1070 usb_deregister_device_driver(&usb_generic_driver);
1071 usb_major_cleanup();
1072 usbfs_cleanup();
1073 usb_deregister(&usbfs_driver);
1074 usb_devio_cleanup();
1075 usb_hub_cleanup();
1076 bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
1077 bus_unregister(&usb_bus_type);
1078 usb_debugfs_cleanup();
1079}
1080
1081subsys_initcall(usb_init);
1082module_exit(usb_exit);
1083MODULE_LICENSE("GPL");