Linux Audio

Check our new training course

Loading...
Note: File does not exist in v6.8.
  1/*
  2 *  Copyright (C) 1994-1998	   Linus Torvalds & authors (see below)
  3 *  Copyright (C) 1998-2002	   Linux ATA Development
  4 *				      Andre Hedrick <andre@linux-ide.org>
  5 *  Copyright (C) 2003		   Red Hat
  6 *  Copyright (C) 2003-2005, 2007  Bartlomiej Zolnierkiewicz
  7 */
  8
  9/*
 10 *  Mostly written by Mark Lord <mlord@pobox.com>
 11 *                and Gadi Oxman <gadio@netvision.net.il>
 12 *                and Andre Hedrick <andre@linux-ide.org>
 13 *
 14 * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
 15 */
 16
 17#include <linux/types.h>
 18#include <linux/string.h>
 19#include <linux/kernel.h>
 20#include <linux/timer.h>
 21#include <linux/mm.h>
 22#include <linux/interrupt.h>
 23#include <linux/major.h>
 24#include <linux/errno.h>
 25#include <linux/genhd.h>
 26#include <linux/slab.h>
 27#include <linux/delay.h>
 28#include <linux/mutex.h>
 29#include <linux/leds.h>
 30#include <linux/ide.h>
 31
 32#include <asm/byteorder.h>
 33#include <asm/irq.h>
 34#include <asm/uaccess.h>
 35#include <asm/io.h>
 36#include <asm/div64.h>
 37
 38#include "ide-disk.h"
 39
 40static const u8 ide_rw_cmds[] = {
 41	ATA_CMD_READ_MULTI,
 42	ATA_CMD_WRITE_MULTI,
 43	ATA_CMD_READ_MULTI_EXT,
 44	ATA_CMD_WRITE_MULTI_EXT,
 45	ATA_CMD_PIO_READ,
 46	ATA_CMD_PIO_WRITE,
 47	ATA_CMD_PIO_READ_EXT,
 48	ATA_CMD_PIO_WRITE_EXT,
 49	ATA_CMD_READ,
 50	ATA_CMD_WRITE,
 51	ATA_CMD_READ_EXT,
 52	ATA_CMD_WRITE_EXT,
 53};
 54
 55static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
 56{
 57	u8 index, lba48, write;
 58
 59	lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
 60	write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
 61
 62	if (dma) {
 63		cmd->protocol = ATA_PROT_DMA;
 64		index = 8;
 65	} else {
 66		cmd->protocol = ATA_PROT_PIO;
 67		if (drive->mult_count) {
 68			cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
 69			index = 0;
 70		} else
 71			index = 4;
 72	}
 73
 74	cmd->tf.command = ide_rw_cmds[index + lba48 + write];
 75}
 76
 77/*
 78 * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
 79 * using LBA if supported, or CHS otherwise, to address sectors.
 80 */
 81static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
 82					sector_t block)
 83{
 84	ide_hwif_t *hwif	= drive->hwif;
 85	u16 nsectors		= (u16)blk_rq_sectors(rq);
 86	u8 lba48		= !!(drive->dev_flags & IDE_DFLAG_LBA48);
 87	u8 dma			= !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
 88	struct ide_cmd		cmd;
 89	struct ide_taskfile	*tf = &cmd.tf;
 90	ide_startstop_t		rc;
 91
 92	if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
 93		if (block + blk_rq_sectors(rq) > 1ULL << 28)
 94			dma = 0;
 95		else
 96			lba48 = 0;
 97	}
 98
 99	memset(&cmd, 0, sizeof(cmd));
100	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
101	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
102
103	if (drive->dev_flags & IDE_DFLAG_LBA) {
104		if (lba48) {
105			pr_debug("%s: LBA=0x%012llx\n", drive->name,
106					(unsigned long long)block);
107
108			tf->nsect  = nsectors & 0xff;
109			tf->lbal   = (u8) block;
110			tf->lbam   = (u8)(block >>  8);
111			tf->lbah   = (u8)(block >> 16);
112			tf->device = ATA_LBA;
113
114			tf = &cmd.hob;
115			tf->nsect = (nsectors >> 8) & 0xff;
116			tf->lbal  = (u8)(block >> 24);
117			if (sizeof(block) != 4) {
118				tf->lbam = (u8)((u64)block >> 32);
119				tf->lbah = (u8)((u64)block >> 40);
120			}
121
122			cmd.valid.out.hob = IDE_VALID_OUT_HOB;
123			cmd.valid.in.hob  = IDE_VALID_IN_HOB;
124			cmd.tf_flags |= IDE_TFLAG_LBA48;
125		} else {
126			tf->nsect  = nsectors & 0xff;
127			tf->lbal   = block;
128			tf->lbam   = block >>= 8;
129			tf->lbah   = block >>= 8;
130			tf->device = ((block >> 8) & 0xf) | ATA_LBA;
131		}
132	} else {
133		unsigned int sect, head, cyl, track;
134
135		track = (int)block / drive->sect;
136		sect  = (int)block % drive->sect + 1;
137		head  = track % drive->head;
138		cyl   = track / drive->head;
139
140		pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
141
142		tf->nsect  = nsectors & 0xff;
143		tf->lbal   = sect;
144		tf->lbam   = cyl;
145		tf->lbah   = cyl >> 8;
146		tf->device = head;
147	}
148
149	cmd.tf_flags |= IDE_TFLAG_FS;
150
151	if (rq_data_dir(rq))
152		cmd.tf_flags |= IDE_TFLAG_WRITE;
153
154	ide_tf_set_cmd(drive, &cmd, dma);
155	cmd.rq = rq;
156
157	if (dma == 0) {
158		ide_init_sg_cmd(&cmd, nsectors << 9);
159		ide_map_sg(drive, &cmd);
160	}
161
162	rc = do_rw_taskfile(drive, &cmd);
163
164	if (rc == ide_stopped && dma) {
165		/* fallback to PIO */
166		cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
167		ide_tf_set_cmd(drive, &cmd, 0);
168		ide_init_sg_cmd(&cmd, nsectors << 9);
169		rc = do_rw_taskfile(drive, &cmd);
170	}
171
172	return rc;
173}
174
175/*
176 * 268435455  == 137439 MB or 28bit limit
177 * 320173056  == 163929 MB or 48bit addressing
178 * 1073741822 == 549756 MB or 48bit addressing fake drive
179 */
180
181static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
182				      sector_t block)
183{
184	ide_hwif_t *hwif = drive->hwif;
185
186	BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
187	BUG_ON(rq->cmd_type != REQ_TYPE_FS);
188
189	ledtrig_ide_activity();
190
191	pr_debug("%s: %sing: block=%llu, sectors=%u, buffer=0x%08lx\n",
192		 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
193		 (unsigned long long)block, blk_rq_sectors(rq),
194		 (unsigned long)rq->buffer);
195
196	if (hwif->rw_disk)
197		hwif->rw_disk(drive, rq);
198
199	return __ide_do_rw_disk(drive, rq, block);
200}
201
202/*
203 * Queries for true maximum capacity of the drive.
204 * Returns maximum LBA address (> 0) of the drive, 0 if failed.
205 */
206static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
207{
208	struct ide_cmd cmd;
209	struct ide_taskfile *tf = &cmd.tf;
210	u64 addr = 0;
211
212	memset(&cmd, 0, sizeof(cmd));
213	if (lba48)
214		tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
215	else
216		tf->command = ATA_CMD_READ_NATIVE_MAX;
217	tf->device  = ATA_LBA;
218
219	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
220	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
221	if (lba48) {
222		cmd.valid.out.hob = IDE_VALID_OUT_HOB;
223		cmd.valid.in.hob  = IDE_VALID_IN_HOB;
224		cmd.tf_flags = IDE_TFLAG_LBA48;
225	}
226
227	ide_no_data_taskfile(drive, &cmd);
228
229	/* if OK, compute maximum address value */
230	if (!(tf->status & ATA_ERR))
231		addr = ide_get_lba_addr(&cmd, lba48) + 1;
232
233	return addr;
234}
235
236/*
237 * Sets maximum virtual LBA address of the drive.
238 * Returns new maximum virtual LBA address (> 0) or 0 on failure.
239 */
240static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
241{
242	struct ide_cmd cmd;
243	struct ide_taskfile *tf = &cmd.tf;
244	u64 addr_set = 0;
245
246	addr_req--;
247
248	memset(&cmd, 0, sizeof(cmd));
249	tf->lbal     = (addr_req >>  0) & 0xff;
250	tf->lbam     = (addr_req >>= 8) & 0xff;
251	tf->lbah     = (addr_req >>= 8) & 0xff;
252	if (lba48) {
253		cmd.hob.lbal = (addr_req >>= 8) & 0xff;
254		cmd.hob.lbam = (addr_req >>= 8) & 0xff;
255		cmd.hob.lbah = (addr_req >>= 8) & 0xff;
256		tf->command  = ATA_CMD_SET_MAX_EXT;
257	} else {
258		tf->device   = (addr_req >>= 8) & 0x0f;
259		tf->command  = ATA_CMD_SET_MAX;
260	}
261	tf->device |= ATA_LBA;
262
263	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
264	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
265	if (lba48) {
266		cmd.valid.out.hob = IDE_VALID_OUT_HOB;
267		cmd.valid.in.hob  = IDE_VALID_IN_HOB;
268		cmd.tf_flags = IDE_TFLAG_LBA48;
269	}
270
271	ide_no_data_taskfile(drive, &cmd);
272
273	/* if OK, compute maximum address value */
274	if (!(tf->status & ATA_ERR))
275		addr_set = ide_get_lba_addr(&cmd, lba48) + 1;
276
277	return addr_set;
278}
279
280static unsigned long long sectors_to_MB(unsigned long long n)
281{
282	n <<= 9;		/* make it bytes */
283	do_div(n, 1000000);	/* make it MB */
284	return n;
285}
286
287/*
288 * Some disks report total number of sectors instead of
289 * maximum sector address.  We list them here.
290 */
291static const struct drive_list_entry hpa_list[] = {
292	{ "ST340823A",	NULL },
293	{ "ST320413A",	NULL },
294	{ "ST310211A",	NULL },
295	{ NULL,		NULL }
296};
297
298static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
299{
300	u64 capacity, set_max;
301
302	capacity = drive->capacity64;
303	set_max  = idedisk_read_native_max_address(drive, lba48);
304
305	if (ide_in_drive_list(drive->id, hpa_list)) {
306		/*
307		 * Since we are inclusive wrt to firmware revisions do this
308		 * extra check and apply the workaround only when needed.
309		 */
310		if (set_max == capacity + 1)
311			set_max--;
312	}
313
314	return set_max;
315}
316
317static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
318{
319	set_max = idedisk_set_max_address(drive, set_max, lba48);
320	if (set_max)
321		drive->capacity64 = set_max;
322
323	return set_max;
324}
325
326static void idedisk_check_hpa(ide_drive_t *drive)
327{
328	u64 capacity, set_max;
329	int lba48 = ata_id_lba48_enabled(drive->id);
330
331	capacity = drive->capacity64;
332	set_max  = ide_disk_hpa_get_native_capacity(drive, lba48);
333
334	if (set_max <= capacity)
335		return;
336
337	drive->probed_capacity = set_max;
338
339	printk(KERN_INFO "%s: Host Protected Area detected.\n"
340			 "\tcurrent capacity is %llu sectors (%llu MB)\n"
341			 "\tnative  capacity is %llu sectors (%llu MB)\n",
342			 drive->name,
343			 capacity, sectors_to_MB(capacity),
344			 set_max, sectors_to_MB(set_max));
345
346	if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
347		return;
348
349	set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
350	if (set_max)
351		printk(KERN_INFO "%s: Host Protected Area disabled.\n",
352				 drive->name);
353}
354
355static int ide_disk_get_capacity(ide_drive_t *drive)
356{
357	u16 *id = drive->id;
358	int lba;
359
360	if (ata_id_lba48_enabled(id)) {
361		/* drive speaks 48-bit LBA */
362		lba = 1;
363		drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
364	} else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
365		/* drive speaks 28-bit LBA */
366		lba = 1;
367		drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
368	} else {
369		/* drive speaks boring old 28-bit CHS */
370		lba = 0;
371		drive->capacity64 = drive->cyl * drive->head * drive->sect;
372	}
373
374	drive->probed_capacity = drive->capacity64;
375
376	if (lba) {
377		drive->dev_flags |= IDE_DFLAG_LBA;
378
379		/*
380		* If this device supports the Host Protected Area feature set,
381		* then we may need to change our opinion about its capacity.
382		*/
383		if (ata_id_hpa_enabled(id))
384			idedisk_check_hpa(drive);
385	}
386
387	/* limit drive capacity to 137GB if LBA48 cannot be used */
388	if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
389	    drive->capacity64 > 1ULL << 28) {
390		printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
391		       "%llu sectors (%llu MB)\n",
392		       drive->name, (unsigned long long)drive->capacity64,
393		       sectors_to_MB(drive->capacity64));
394		drive->probed_capacity = drive->capacity64 = 1ULL << 28;
395	}
396
397	if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
398	    (drive->dev_flags & IDE_DFLAG_LBA48)) {
399		if (drive->capacity64 > 1ULL << 28) {
400			printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
401					 " will be used for accessing sectors "
402					 "> %u\n", drive->name, 1 << 28);
403		} else
404			drive->dev_flags &= ~IDE_DFLAG_LBA48;
405	}
406
407	return 0;
408}
409
410static void ide_disk_unlock_native_capacity(ide_drive_t *drive)
411{
412	u16 *id = drive->id;
413	int lba48 = ata_id_lba48_enabled(id);
414
415	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
416	    ata_id_hpa_enabled(id) == 0)
417		return;
418
419	/*
420	 * according to the spec the SET MAX ADDRESS command shall be
421	 * immediately preceded by a READ NATIVE MAX ADDRESS command
422	 */
423	if (!ide_disk_hpa_get_native_capacity(drive, lba48))
424		return;
425
426	if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48))
427		drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */
428}
429
430static int idedisk_prep_fn(struct request_queue *q, struct request *rq)
431{
432	ide_drive_t *drive = q->queuedata;
433	struct ide_cmd *cmd;
434
435	if (!(rq->cmd_flags & REQ_FLUSH))
436		return BLKPREP_OK;
437
438	if (rq->special) {
439		cmd = rq->special;
440		memset(cmd, 0, sizeof(*cmd));
441	} else {
442		cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
443	}
444
445	/* FIXME: map struct ide_taskfile on rq->cmd[] */
446	BUG_ON(cmd == NULL);
447
448	if (ata_id_flush_ext_enabled(drive->id) &&
449	    (drive->capacity64 >= (1UL << 28)))
450		cmd->tf.command = ATA_CMD_FLUSH_EXT;
451	else
452		cmd->tf.command = ATA_CMD_FLUSH;
453	cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
454	cmd->tf_flags = IDE_TFLAG_DYN;
455	cmd->protocol = ATA_PROT_NODATA;
456
457	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
458	rq->special = cmd;
459	cmd->rq = rq;
460
461	return BLKPREP_OK;
462}
463
464ide_devset_get(multcount, mult_count);
465
466/*
467 * This is tightly woven into the driver->do_special can not touch.
468 * DON'T do it again until a total personality rewrite is committed.
469 */
470static int set_multcount(ide_drive_t *drive, int arg)
471{
472	struct request *rq;
473	int error;
474
475	if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
476		return -EINVAL;
477
478	if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
479		return -EBUSY;
480
481	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
482	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
483
484	drive->mult_req = arg;
485	drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
486	error = blk_execute_rq(drive->queue, NULL, rq, 0);
487	blk_put_request(rq);
488
489	return (drive->mult_count == arg) ? 0 : -EIO;
490}
491
492ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
493
494static int set_nowerr(ide_drive_t *drive, int arg)
495{
496	if (arg < 0 || arg > 1)
497		return -EINVAL;
498
499	if (arg)
500		drive->dev_flags |= IDE_DFLAG_NOWERR;
501	else
502		drive->dev_flags &= ~IDE_DFLAG_NOWERR;
503
504	drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
505
506	return 0;
507}
508
509static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
510{
511	struct ide_cmd cmd;
512
513	memset(&cmd, 0, sizeof(cmd));
514	cmd.tf.feature = feature;
515	cmd.tf.nsect   = nsect;
516	cmd.tf.command = ATA_CMD_SET_FEATURES;
517	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
518	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
519
520	return ide_no_data_taskfile(drive, &cmd);
521}
522
523static void update_flush(ide_drive_t *drive)
524{
525	u16 *id = drive->id;
526	unsigned flush = 0;
527
528	if (drive->dev_flags & IDE_DFLAG_WCACHE) {
529		unsigned long long capacity;
530		int barrier;
531		/*
532		 * We must avoid issuing commands a drive does not
533		 * understand or we may crash it. We check flush cache
534		 * is supported. We also check we have the LBA48 flush
535		 * cache if the drive capacity is too large. By this
536		 * time we have trimmed the drive capacity if LBA48 is
537		 * not available so we don't need to recheck that.
538		 */
539		capacity = ide_gd_capacity(drive);
540		barrier = ata_id_flush_enabled(id) &&
541			(drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
542			((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
543			 capacity <= (1ULL << 28) ||
544			 ata_id_flush_ext_enabled(id));
545
546		printk(KERN_INFO "%s: cache flushes %ssupported\n",
547		       drive->name, barrier ? "" : "not ");
548
549		if (barrier) {
550			flush = REQ_FLUSH;
551			blk_queue_prep_rq(drive->queue, idedisk_prep_fn);
552		}
553	}
554
555	blk_queue_flush(drive->queue, flush);
556}
557
558ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
559
560static int set_wcache(ide_drive_t *drive, int arg)
561{
562	int err = 1;
563
564	if (arg < 0 || arg > 1)
565		return -EINVAL;
566
567	if (ata_id_flush_enabled(drive->id)) {
568		err = ide_do_setfeature(drive,
569			arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
570		if (err == 0) {
571			if (arg)
572				drive->dev_flags |= IDE_DFLAG_WCACHE;
573			else
574				drive->dev_flags &= ~IDE_DFLAG_WCACHE;
575		}
576	}
577
578	update_flush(drive);
579
580	return err;
581}
582
583static int do_idedisk_flushcache(ide_drive_t *drive)
584{
585	struct ide_cmd cmd;
586
587	memset(&cmd, 0, sizeof(cmd));
588	if (ata_id_flush_ext_enabled(drive->id))
589		cmd.tf.command = ATA_CMD_FLUSH_EXT;
590	else
591		cmd.tf.command = ATA_CMD_FLUSH;
592	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
593	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
594
595	return ide_no_data_taskfile(drive, &cmd);
596}
597
598ide_devset_get(acoustic, acoustic);
599
600static int set_acoustic(ide_drive_t *drive, int arg)
601{
602	if (arg < 0 || arg > 254)
603		return -EINVAL;
604
605	ide_do_setfeature(drive,
606		arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
607
608	drive->acoustic = arg;
609
610	return 0;
611}
612
613ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
614
615/*
616 * drive->addressing:
617 *	0: 28-bit
618 *	1: 48-bit
619 *	2: 48-bit capable doing 28-bit
620 */
621static int set_addressing(ide_drive_t *drive, int arg)
622{
623	if (arg < 0 || arg > 2)
624		return -EINVAL;
625
626	if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
627	    ata_id_lba48_enabled(drive->id) == 0))
628		return -EIO;
629
630	if (arg == 2)
631		arg = 0;
632
633	if (arg)
634		drive->dev_flags |= IDE_DFLAG_LBA48;
635	else
636		drive->dev_flags &= ~IDE_DFLAG_LBA48;
637
638	return 0;
639}
640
641ide_ext_devset_rw(acoustic, acoustic);
642ide_ext_devset_rw(address, addressing);
643ide_ext_devset_rw(multcount, multcount);
644ide_ext_devset_rw(wcache, wcache);
645
646ide_ext_devset_rw_sync(nowerr, nowerr);
647
648static int ide_disk_check(ide_drive_t *drive, const char *s)
649{
650	return 1;
651}
652
653static void ide_disk_setup(ide_drive_t *drive)
654{
655	struct ide_disk_obj *idkp = drive->driver_data;
656	struct request_queue *q = drive->queue;
657	ide_hwif_t *hwif = drive->hwif;
658	u16 *id = drive->id;
659	char *m = (char *)&id[ATA_ID_PROD];
660	unsigned long long capacity;
661
662	ide_proc_register_driver(drive, idkp->driver);
663
664	if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
665		return;
666
667	if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
668		/*
669		 * Removable disks (eg. SYQUEST); ignore 'WD' drives
670		 */
671		if (m[0] != 'W' || m[1] != 'D')
672			drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
673	}
674
675	(void)set_addressing(drive, 1);
676
677	if (drive->dev_flags & IDE_DFLAG_LBA48) {
678		int max_s = 2048;
679
680		if (max_s > hwif->rqsize)
681			max_s = hwif->rqsize;
682
683		blk_queue_max_hw_sectors(q, max_s);
684	}
685
686	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
687	       queue_max_sectors(q) / 2);
688
689	if (ata_id_is_ssd(id))
690		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
691
692	/* calculate drive capacity, and select LBA if possible */
693	ide_disk_get_capacity(drive);
694
695	/*
696	 * if possible, give fdisk access to more of the drive,
697	 * by correcting bios_cyls:
698	 */
699	capacity = ide_gd_capacity(drive);
700
701	if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
702		if (ata_id_lba48_enabled(drive->id)) {
703			/* compatibility */
704			drive->bios_sect = 63;
705			drive->bios_head = 255;
706		}
707
708		if (drive->bios_sect && drive->bios_head) {
709			unsigned int cap0 = capacity; /* truncate to 32 bits */
710			unsigned int cylsz, cyl;
711
712			if (cap0 != capacity)
713				drive->bios_cyl = 65535;
714			else {
715				cylsz = drive->bios_sect * drive->bios_head;
716				cyl = cap0 / cylsz;
717				if (cyl > 65535)
718					cyl = 65535;
719				if (cyl > drive->bios_cyl)
720					drive->bios_cyl = cyl;
721			}
722		}
723	}
724	printk(KERN_INFO "%s: %llu sectors (%llu MB)",
725			 drive->name, capacity, sectors_to_MB(capacity));
726
727	/* Only print cache size when it was specified */
728	if (id[ATA_ID_BUF_SIZE])
729		printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
730
731	printk(KERN_CONT ", CHS=%d/%d/%d\n",
732			 drive->bios_cyl, drive->bios_head, drive->bios_sect);
733
734	/* write cache enabled? */
735	if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
736		drive->dev_flags |= IDE_DFLAG_WCACHE;
737
738	set_wcache(drive, 1);
739
740	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
741	    (drive->head == 0 || drive->head > 16)) {
742		printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
743			drive->name, drive->head);
744		drive->dev_flags &= ~IDE_DFLAG_ATTACH;
745	} else
746		drive->dev_flags |= IDE_DFLAG_ATTACH;
747}
748
749static void ide_disk_flush(ide_drive_t *drive)
750{
751	if (ata_id_flush_enabled(drive->id) == 0 ||
752	    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
753		return;
754
755	if (do_idedisk_flushcache(drive))
756		printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
757}
758
759static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
760{
761	return 0;
762}
763
764static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
765				 int on)
766{
767	struct ide_cmd cmd;
768	int ret;
769
770	if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
771		return 0;
772
773	memset(&cmd, 0, sizeof(cmd));
774	cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
775	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
776	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
777
778	ret = ide_no_data_taskfile(drive, &cmd);
779
780	if (ret)
781		drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
782
783	return ret;
784}
785
786const struct ide_disk_ops ide_ata_disk_ops = {
787	.check			= ide_disk_check,
788	.unlock_native_capacity	= ide_disk_unlock_native_capacity,
789	.get_capacity		= ide_disk_get_capacity,
790	.setup			= ide_disk_setup,
791	.flush			= ide_disk_flush,
792	.init_media		= ide_disk_init_media,
793	.set_doorlock		= ide_disk_set_doorlock,
794	.do_request		= ide_do_rw_disk,
795	.ioctl			= ide_disk_ioctl,
796};