Linux Audio

Check our new training course

Loading...
Note: File does not exist in v6.8.
  1/*
  2 *  Copyright (C) 1994-1998	   Linus Torvalds & authors (see below)
  3 *  Copyright (C) 1998-2002	   Linux ATA Development
  4 *				      Andre Hedrick <andre@linux-ide.org>
  5 *  Copyright (C) 2003		   Red Hat
  6 *  Copyright (C) 2003-2005, 2007  Bartlomiej Zolnierkiewicz
  7 */
  8
  9/*
 10 *  Mostly written by Mark Lord <mlord@pobox.com>
 11 *                and Gadi Oxman <gadio@netvision.net.il>
 12 *                and Andre Hedrick <andre@linux-ide.org>
 13 *
 14 * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
 15 */
 16
 17#include <linux/types.h>
 18#include <linux/string.h>
 19#include <linux/kernel.h>
 20#include <linux/timer.h>
 21#include <linux/mm.h>
 22#include <linux/interrupt.h>
 23#include <linux/major.h>
 24#include <linux/errno.h>
 25#include <linux/genhd.h>
 26#include <linux/slab.h>
 27#include <linux/delay.h>
 28#include <linux/mutex.h>
 29#include <linux/leds.h>
 30#include <linux/ide.h>
 31
 32#include <asm/byteorder.h>
 33#include <asm/irq.h>
 34#include <asm/uaccess.h>
 35#include <asm/io.h>
 36#include <asm/div64.h>
 37
 38#include "ide-disk.h"
 39
 40static const u8 ide_rw_cmds[] = {
 41	ATA_CMD_READ_MULTI,
 42	ATA_CMD_WRITE_MULTI,
 43	ATA_CMD_READ_MULTI_EXT,
 44	ATA_CMD_WRITE_MULTI_EXT,
 45	ATA_CMD_PIO_READ,
 46	ATA_CMD_PIO_WRITE,
 47	ATA_CMD_PIO_READ_EXT,
 48	ATA_CMD_PIO_WRITE_EXT,
 49	ATA_CMD_READ,
 50	ATA_CMD_WRITE,
 51	ATA_CMD_READ_EXT,
 52	ATA_CMD_WRITE_EXT,
 53};
 54
 55static void ide_tf_set_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 dma)
 56{
 57	u8 index, lba48, write;
 58
 59	lba48 = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
 60	write = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
 61
 62	if (dma) {
 63		cmd->protocol = ATA_PROT_DMA;
 64		index = 8;
 65	} else {
 66		cmd->protocol = ATA_PROT_PIO;
 67		if (drive->mult_count) {
 68			cmd->tf_flags |= IDE_TFLAG_MULTI_PIO;
 69			index = 0;
 70		} else
 71			index = 4;
 72	}
 73
 74	cmd->tf.command = ide_rw_cmds[index + lba48 + write];
 75}
 76
 77/*
 78 * __ide_do_rw_disk() issues READ and WRITE commands to a disk,
 79 * using LBA if supported, or CHS otherwise, to address sectors.
 80 */
 81static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
 82					sector_t block)
 83{
 84	ide_hwif_t *hwif	= drive->hwif;
 85	u16 nsectors		= (u16)blk_rq_sectors(rq);
 86	u8 lba48		= !!(drive->dev_flags & IDE_DFLAG_LBA48);
 87	u8 dma			= !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
 88	struct ide_cmd		cmd;
 89	struct ide_taskfile	*tf = &cmd.tf;
 90	ide_startstop_t		rc;
 91
 92	if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
 93		if (block + blk_rq_sectors(rq) > 1ULL << 28)
 94			dma = 0;
 95		else
 96			lba48 = 0;
 97	}
 98
 99	memset(&cmd, 0, sizeof(cmd));
100	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
101	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
102
103	if (drive->dev_flags & IDE_DFLAG_LBA) {
104		if (lba48) {
105			pr_debug("%s: LBA=0x%012llx\n", drive->name,
106					(unsigned long long)block);
107
108			tf->nsect  = nsectors & 0xff;
109			tf->lbal   = (u8) block;
110			tf->lbam   = (u8)(block >>  8);
111			tf->lbah   = (u8)(block >> 16);
112			tf->device = ATA_LBA;
113
114			tf = &cmd.hob;
115			tf->nsect = (nsectors >> 8) & 0xff;
116			tf->lbal  = (u8)(block >> 24);
117			if (sizeof(block) != 4) {
118				tf->lbam = (u8)((u64)block >> 32);
119				tf->lbah = (u8)((u64)block >> 40);
120			}
121
122			cmd.valid.out.hob = IDE_VALID_OUT_HOB;
123			cmd.valid.in.hob  = IDE_VALID_IN_HOB;
124			cmd.tf_flags |= IDE_TFLAG_LBA48;
125		} else {
126			tf->nsect  = nsectors & 0xff;
127			tf->lbal   = block;
128			tf->lbam   = block >>= 8;
129			tf->lbah   = block >>= 8;
130			tf->device = ((block >> 8) & 0xf) | ATA_LBA;
131		}
132	} else {
133		unsigned int sect, head, cyl, track;
134
135		track = (int)block / drive->sect;
136		sect  = (int)block % drive->sect + 1;
137		head  = track % drive->head;
138		cyl   = track / drive->head;
139
140		pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
141
142		tf->nsect  = nsectors & 0xff;
143		tf->lbal   = sect;
144		tf->lbam   = cyl;
145		tf->lbah   = cyl >> 8;
146		tf->device = head;
147	}
148
149	cmd.tf_flags |= IDE_TFLAG_FS;
150
151	if (rq_data_dir(rq))
152		cmd.tf_flags |= IDE_TFLAG_WRITE;
153
154	ide_tf_set_cmd(drive, &cmd, dma);
155	cmd.rq = rq;
156
157	if (dma == 0) {
158		ide_init_sg_cmd(&cmd, nsectors << 9);
159		ide_map_sg(drive, &cmd);
160	}
161
162	rc = do_rw_taskfile(drive, &cmd);
163
164	if (rc == ide_stopped && dma) {
165		/* fallback to PIO */
166		cmd.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
167		ide_tf_set_cmd(drive, &cmd, 0);
168		ide_init_sg_cmd(&cmd, nsectors << 9);
169		rc = do_rw_taskfile(drive, &cmd);
170	}
171
172	return rc;
173}
174
175/*
176 * 268435455  == 137439 MB or 28bit limit
177 * 320173056  == 163929 MB or 48bit addressing
178 * 1073741822 == 549756 MB or 48bit addressing fake drive
179 */
180
181static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
182				      sector_t block)
183{
184	ide_hwif_t *hwif = drive->hwif;
185
186	BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
187	BUG_ON(rq->cmd_type != REQ_TYPE_FS);
188
189	ledtrig_ide_activity();
190
191	pr_debug("%s: %sing: block=%llu, sectors=%u\n",
192		 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
193		 (unsigned long long)block, blk_rq_sectors(rq));
194
195	if (hwif->rw_disk)
196		hwif->rw_disk(drive, rq);
197
198	return __ide_do_rw_disk(drive, rq, block);
199}
200
201/*
202 * Queries for true maximum capacity of the drive.
203 * Returns maximum LBA address (> 0) of the drive, 0 if failed.
204 */
205static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
206{
207	struct ide_cmd cmd;
208	struct ide_taskfile *tf = &cmd.tf;
209	u64 addr = 0;
210
211	memset(&cmd, 0, sizeof(cmd));
212	if (lba48)
213		tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
214	else
215		tf->command = ATA_CMD_READ_NATIVE_MAX;
216	tf->device  = ATA_LBA;
217
218	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
219	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
220	if (lba48) {
221		cmd.valid.out.hob = IDE_VALID_OUT_HOB;
222		cmd.valid.in.hob  = IDE_VALID_IN_HOB;
223		cmd.tf_flags = IDE_TFLAG_LBA48;
224	}
225
226	ide_no_data_taskfile(drive, &cmd);
227
228	/* if OK, compute maximum address value */
229	if (!(tf->status & ATA_ERR))
230		addr = ide_get_lba_addr(&cmd, lba48) + 1;
231
232	return addr;
233}
234
235/*
236 * Sets maximum virtual LBA address of the drive.
237 * Returns new maximum virtual LBA address (> 0) or 0 on failure.
238 */
239static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
240{
241	struct ide_cmd cmd;
242	struct ide_taskfile *tf = &cmd.tf;
243	u64 addr_set = 0;
244
245	addr_req--;
246
247	memset(&cmd, 0, sizeof(cmd));
248	tf->lbal     = (addr_req >>  0) & 0xff;
249	tf->lbam     = (addr_req >>= 8) & 0xff;
250	tf->lbah     = (addr_req >>= 8) & 0xff;
251	if (lba48) {
252		cmd.hob.lbal = (addr_req >>= 8) & 0xff;
253		cmd.hob.lbam = (addr_req >>= 8) & 0xff;
254		cmd.hob.lbah = (addr_req >>= 8) & 0xff;
255		tf->command  = ATA_CMD_SET_MAX_EXT;
256	} else {
257		tf->device   = (addr_req >>= 8) & 0x0f;
258		tf->command  = ATA_CMD_SET_MAX;
259	}
260	tf->device |= ATA_LBA;
261
262	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
263	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
264	if (lba48) {
265		cmd.valid.out.hob = IDE_VALID_OUT_HOB;
266		cmd.valid.in.hob  = IDE_VALID_IN_HOB;
267		cmd.tf_flags = IDE_TFLAG_LBA48;
268	}
269
270	ide_no_data_taskfile(drive, &cmd);
271
272	/* if OK, compute maximum address value */
273	if (!(tf->status & ATA_ERR))
274		addr_set = ide_get_lba_addr(&cmd, lba48) + 1;
275
276	return addr_set;
277}
278
279static unsigned long long sectors_to_MB(unsigned long long n)
280{
281	n <<= 9;		/* make it bytes */
282	do_div(n, 1000000);	/* make it MB */
283	return n;
284}
285
286/*
287 * Some disks report total number of sectors instead of
288 * maximum sector address.  We list them here.
289 */
290static const struct drive_list_entry hpa_list[] = {
291	{ "ST340823A",	NULL },
292	{ "ST320413A",	NULL },
293	{ "ST310211A",	NULL },
294	{ NULL,		NULL }
295};
296
297static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
298{
299	u64 capacity, set_max;
300
301	capacity = drive->capacity64;
302	set_max  = idedisk_read_native_max_address(drive, lba48);
303
304	if (ide_in_drive_list(drive->id, hpa_list)) {
305		/*
306		 * Since we are inclusive wrt to firmware revisions do this
307		 * extra check and apply the workaround only when needed.
308		 */
309		if (set_max == capacity + 1)
310			set_max--;
311	}
312
313	return set_max;
314}
315
316static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
317{
318	set_max = idedisk_set_max_address(drive, set_max, lba48);
319	if (set_max)
320		drive->capacity64 = set_max;
321
322	return set_max;
323}
324
325static void idedisk_check_hpa(ide_drive_t *drive)
326{
327	u64 capacity, set_max;
328	int lba48 = ata_id_lba48_enabled(drive->id);
329
330	capacity = drive->capacity64;
331	set_max  = ide_disk_hpa_get_native_capacity(drive, lba48);
332
333	if (set_max <= capacity)
334		return;
335
336	drive->probed_capacity = set_max;
337
338	printk(KERN_INFO "%s: Host Protected Area detected.\n"
339			 "\tcurrent capacity is %llu sectors (%llu MB)\n"
340			 "\tnative  capacity is %llu sectors (%llu MB)\n",
341			 drive->name,
342			 capacity, sectors_to_MB(capacity),
343			 set_max, sectors_to_MB(set_max));
344
345	if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
346		return;
347
348	set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
349	if (set_max)
350		printk(KERN_INFO "%s: Host Protected Area disabled.\n",
351				 drive->name);
352}
353
354static int ide_disk_get_capacity(ide_drive_t *drive)
355{
356	u16 *id = drive->id;
357	int lba;
358
359	if (ata_id_lba48_enabled(id)) {
360		/* drive speaks 48-bit LBA */
361		lba = 1;
362		drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
363	} else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
364		/* drive speaks 28-bit LBA */
365		lba = 1;
366		drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
367	} else {
368		/* drive speaks boring old 28-bit CHS */
369		lba = 0;
370		drive->capacity64 = drive->cyl * drive->head * drive->sect;
371	}
372
373	drive->probed_capacity = drive->capacity64;
374
375	if (lba) {
376		drive->dev_flags |= IDE_DFLAG_LBA;
377
378		/*
379		* If this device supports the Host Protected Area feature set,
380		* then we may need to change our opinion about its capacity.
381		*/
382		if (ata_id_hpa_enabled(id))
383			idedisk_check_hpa(drive);
384	}
385
386	/* limit drive capacity to 137GB if LBA48 cannot be used */
387	if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
388	    drive->capacity64 > 1ULL << 28) {
389		printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
390		       "%llu sectors (%llu MB)\n",
391		       drive->name, (unsigned long long)drive->capacity64,
392		       sectors_to_MB(drive->capacity64));
393		drive->probed_capacity = drive->capacity64 = 1ULL << 28;
394	}
395
396	if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
397	    (drive->dev_flags & IDE_DFLAG_LBA48)) {
398		if (drive->capacity64 > 1ULL << 28) {
399			printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
400					 " will be used for accessing sectors "
401					 "> %u\n", drive->name, 1 << 28);
402		} else
403			drive->dev_flags &= ~IDE_DFLAG_LBA48;
404	}
405
406	return 0;
407}
408
409static void ide_disk_unlock_native_capacity(ide_drive_t *drive)
410{
411	u16 *id = drive->id;
412	int lba48 = ata_id_lba48_enabled(id);
413
414	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
415	    ata_id_hpa_enabled(id) == 0)
416		return;
417
418	/*
419	 * according to the spec the SET MAX ADDRESS command shall be
420	 * immediately preceded by a READ NATIVE MAX ADDRESS command
421	 */
422	if (!ide_disk_hpa_get_native_capacity(drive, lba48))
423		return;
424
425	if (ide_disk_hpa_set_capacity(drive, drive->probed_capacity, lba48))
426		drive->dev_flags |= IDE_DFLAG_NOHPA; /* disable HPA on resume */
427}
428
429static int idedisk_prep_fn(struct request_queue *q, struct request *rq)
430{
431	ide_drive_t *drive = q->queuedata;
432	struct ide_cmd *cmd;
433
434	if (!(rq->cmd_flags & REQ_FLUSH))
435		return BLKPREP_OK;
436
437	if (rq->special) {
438		cmd = rq->special;
439		memset(cmd, 0, sizeof(*cmd));
440	} else {
441		cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
442	}
443
444	/* FIXME: map struct ide_taskfile on rq->cmd[] */
445	BUG_ON(cmd == NULL);
446
447	if (ata_id_flush_ext_enabled(drive->id) &&
448	    (drive->capacity64 >= (1UL << 28)))
449		cmd->tf.command = ATA_CMD_FLUSH_EXT;
450	else
451		cmd->tf.command = ATA_CMD_FLUSH;
452	cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
453	cmd->tf_flags = IDE_TFLAG_DYN;
454	cmd->protocol = ATA_PROT_NODATA;
455
456	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
457	rq->special = cmd;
458	cmd->rq = rq;
459
460	return BLKPREP_OK;
461}
462
463ide_devset_get(multcount, mult_count);
464
465/*
466 * This is tightly woven into the driver->do_special can not touch.
467 * DON'T do it again until a total personality rewrite is committed.
468 */
469static int set_multcount(ide_drive_t *drive, int arg)
470{
471	struct request *rq;
472	int error;
473
474	if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
475		return -EINVAL;
476
477	if (drive->special_flags & IDE_SFLAG_SET_MULTMODE)
478		return -EBUSY;
479
480	rq = blk_get_request(drive->queue, READ, __GFP_RECLAIM);
481	rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
482
483	drive->mult_req = arg;
484	drive->special_flags |= IDE_SFLAG_SET_MULTMODE;
485	error = blk_execute_rq(drive->queue, NULL, rq, 0);
486	blk_put_request(rq);
487
488	return (drive->mult_count == arg) ? 0 : -EIO;
489}
490
491ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
492
493static int set_nowerr(ide_drive_t *drive, int arg)
494{
495	if (arg < 0 || arg > 1)
496		return -EINVAL;
497
498	if (arg)
499		drive->dev_flags |= IDE_DFLAG_NOWERR;
500	else
501		drive->dev_flags &= ~IDE_DFLAG_NOWERR;
502
503	drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
504
505	return 0;
506}
507
508static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
509{
510	struct ide_cmd cmd;
511
512	memset(&cmd, 0, sizeof(cmd));
513	cmd.tf.feature = feature;
514	cmd.tf.nsect   = nsect;
515	cmd.tf.command = ATA_CMD_SET_FEATURES;
516	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
517	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
518
519	return ide_no_data_taskfile(drive, &cmd);
520}
521
522static void update_flush(ide_drive_t *drive)
523{
524	u16 *id = drive->id;
525	unsigned flush = 0;
526
527	if (drive->dev_flags & IDE_DFLAG_WCACHE) {
528		unsigned long long capacity;
529		int barrier;
530		/*
531		 * We must avoid issuing commands a drive does not
532		 * understand or we may crash it. We check flush cache
533		 * is supported. We also check we have the LBA48 flush
534		 * cache if the drive capacity is too large. By this
535		 * time we have trimmed the drive capacity if LBA48 is
536		 * not available so we don't need to recheck that.
537		 */
538		capacity = ide_gd_capacity(drive);
539		barrier = ata_id_flush_enabled(id) &&
540			(drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
541			((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
542			 capacity <= (1ULL << 28) ||
543			 ata_id_flush_ext_enabled(id));
544
545		printk(KERN_INFO "%s: cache flushes %ssupported\n",
546		       drive->name, barrier ? "" : "not ");
547
548		if (barrier) {
549			flush = REQ_FLUSH;
550			blk_queue_prep_rq(drive->queue, idedisk_prep_fn);
551		}
552	}
553
554	blk_queue_flush(drive->queue, flush);
555}
556
557ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
558
559static int set_wcache(ide_drive_t *drive, int arg)
560{
561	int err = 1;
562
563	if (arg < 0 || arg > 1)
564		return -EINVAL;
565
566	if (ata_id_flush_enabled(drive->id)) {
567		err = ide_do_setfeature(drive,
568			arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
569		if (err == 0) {
570			if (arg)
571				drive->dev_flags |= IDE_DFLAG_WCACHE;
572			else
573				drive->dev_flags &= ~IDE_DFLAG_WCACHE;
574		}
575	}
576
577	update_flush(drive);
578
579	return err;
580}
581
582static int do_idedisk_flushcache(ide_drive_t *drive)
583{
584	struct ide_cmd cmd;
585
586	memset(&cmd, 0, sizeof(cmd));
587	if (ata_id_flush_ext_enabled(drive->id))
588		cmd.tf.command = ATA_CMD_FLUSH_EXT;
589	else
590		cmd.tf.command = ATA_CMD_FLUSH;
591	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
592	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
593
594	return ide_no_data_taskfile(drive, &cmd);
595}
596
597ide_devset_get(acoustic, acoustic);
598
599static int set_acoustic(ide_drive_t *drive, int arg)
600{
601	if (arg < 0 || arg > 254)
602		return -EINVAL;
603
604	ide_do_setfeature(drive,
605		arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
606
607	drive->acoustic = arg;
608
609	return 0;
610}
611
612ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
613
614/*
615 * drive->addressing:
616 *	0: 28-bit
617 *	1: 48-bit
618 *	2: 48-bit capable doing 28-bit
619 */
620static int set_addressing(ide_drive_t *drive, int arg)
621{
622	if (arg < 0 || arg > 2)
623		return -EINVAL;
624
625	if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
626	    ata_id_lba48_enabled(drive->id) == 0))
627		return -EIO;
628
629	if (arg == 2)
630		arg = 0;
631
632	if (arg)
633		drive->dev_flags |= IDE_DFLAG_LBA48;
634	else
635		drive->dev_flags &= ~IDE_DFLAG_LBA48;
636
637	return 0;
638}
639
640ide_ext_devset_rw(acoustic, acoustic);
641ide_ext_devset_rw(address, addressing);
642ide_ext_devset_rw(multcount, multcount);
643ide_ext_devset_rw(wcache, wcache);
644
645ide_ext_devset_rw_sync(nowerr, nowerr);
646
647static int ide_disk_check(ide_drive_t *drive, const char *s)
648{
649	return 1;
650}
651
652static void ide_disk_setup(ide_drive_t *drive)
653{
654	struct ide_disk_obj *idkp = drive->driver_data;
655	struct request_queue *q = drive->queue;
656	ide_hwif_t *hwif = drive->hwif;
657	u16 *id = drive->id;
658	char *m = (char *)&id[ATA_ID_PROD];
659	unsigned long long capacity;
660
661	ide_proc_register_driver(drive, idkp->driver);
662
663	if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
664		return;
665
666	if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
667		/*
668		 * Removable disks (eg. SYQUEST); ignore 'WD' drives
669		 */
670		if (m[0] != 'W' || m[1] != 'D')
671			drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
672	}
673
674	(void)set_addressing(drive, 1);
675
676	if (drive->dev_flags & IDE_DFLAG_LBA48) {
677		int max_s = 2048;
678
679		if (max_s > hwif->rqsize)
680			max_s = hwif->rqsize;
681
682		blk_queue_max_hw_sectors(q, max_s);
683	}
684
685	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
686	       queue_max_sectors(q) / 2);
687
688	if (ata_id_is_ssd(id)) {
689		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
690		queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q);
691	}
692
693	/* calculate drive capacity, and select LBA if possible */
694	ide_disk_get_capacity(drive);
695
696	/*
697	 * if possible, give fdisk access to more of the drive,
698	 * by correcting bios_cyls:
699	 */
700	capacity = ide_gd_capacity(drive);
701
702	if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
703		if (ata_id_lba48_enabled(drive->id)) {
704			/* compatibility */
705			drive->bios_sect = 63;
706			drive->bios_head = 255;
707		}
708
709		if (drive->bios_sect && drive->bios_head) {
710			unsigned int cap0 = capacity; /* truncate to 32 bits */
711			unsigned int cylsz, cyl;
712
713			if (cap0 != capacity)
714				drive->bios_cyl = 65535;
715			else {
716				cylsz = drive->bios_sect * drive->bios_head;
717				cyl = cap0 / cylsz;
718				if (cyl > 65535)
719					cyl = 65535;
720				if (cyl > drive->bios_cyl)
721					drive->bios_cyl = cyl;
722			}
723		}
724	}
725	printk(KERN_INFO "%s: %llu sectors (%llu MB)",
726			 drive->name, capacity, sectors_to_MB(capacity));
727
728	/* Only print cache size when it was specified */
729	if (id[ATA_ID_BUF_SIZE])
730		printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
731
732	printk(KERN_CONT ", CHS=%d/%d/%d\n",
733			 drive->bios_cyl, drive->bios_head, drive->bios_sect);
734
735	/* write cache enabled? */
736	if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
737		drive->dev_flags |= IDE_DFLAG_WCACHE;
738
739	set_wcache(drive, 1);
740
741	if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
742	    (drive->head == 0 || drive->head > 16)) {
743		printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
744			drive->name, drive->head);
745		drive->dev_flags &= ~IDE_DFLAG_ATTACH;
746	} else
747		drive->dev_flags |= IDE_DFLAG_ATTACH;
748}
749
750static void ide_disk_flush(ide_drive_t *drive)
751{
752	if (ata_id_flush_enabled(drive->id) == 0 ||
753	    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
754		return;
755
756	if (do_idedisk_flushcache(drive))
757		printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
758}
759
760static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
761{
762	return 0;
763}
764
765static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
766				 int on)
767{
768	struct ide_cmd cmd;
769	int ret;
770
771	if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
772		return 0;
773
774	memset(&cmd, 0, sizeof(cmd));
775	cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
776	cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
777	cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
778
779	ret = ide_no_data_taskfile(drive, &cmd);
780
781	if (ret)
782		drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
783
784	return ret;
785}
786
787const struct ide_disk_ops ide_ata_disk_ops = {
788	.check			= ide_disk_check,
789	.unlock_native_capacity	= ide_disk_unlock_native_capacity,
790	.get_capacity		= ide_disk_get_capacity,
791	.setup			= ide_disk_setup,
792	.flush			= ide_disk_flush,
793	.init_media		= ide_disk_init_media,
794	.set_doorlock		= ide_disk_set_doorlock,
795	.do_request		= ide_do_rw_disk,
796	.ioctl			= ide_disk_ioctl,
797};