Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * MUSB OTG driver core code
4 *
5 * Copyright 2005 Mentor Graphics Corporation
6 * Copyright (C) 2005-2006 by Texas Instruments
7 * Copyright (C) 2006-2007 Nokia Corporation
8 */
9
10/*
11 * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
12 *
13 * This consists of a Host Controller Driver (HCD) and a peripheral
14 * controller driver implementing the "Gadget" API; OTG support is
15 * in the works. These are normal Linux-USB controller drivers which
16 * use IRQs and have no dedicated thread.
17 *
18 * This version of the driver has only been used with products from
19 * Texas Instruments. Those products integrate the Inventra logic
20 * with other DMA, IRQ, and bus modules, as well as other logic that
21 * needs to be reflected in this driver.
22 *
23 *
24 * NOTE: the original Mentor code here was pretty much a collection
25 * of mechanisms that don't seem to have been fully integrated/working
26 * for *any* Linux kernel version. This version aims at Linux 2.6.now,
27 * Key open issues include:
28 *
29 * - Lack of host-side transaction scheduling, for all transfer types.
30 * The hardware doesn't do it; instead, software must.
31 *
32 * This is not an issue for OTG devices that don't support external
33 * hubs, but for more "normal" USB hosts it's a user issue that the
34 * "multipoint" support doesn't scale in the expected ways. That
35 * includes DaVinci EVM in a common non-OTG mode.
36 *
37 * * Control and bulk use dedicated endpoints, and there's as
38 * yet no mechanism to either (a) reclaim the hardware when
39 * peripherals are NAKing, which gets complicated with bulk
40 * endpoints, or (b) use more than a single bulk endpoint in
41 * each direction.
42 *
43 * RESULT: one device may be perceived as blocking another one.
44 *
45 * * Interrupt and isochronous will dynamically allocate endpoint
46 * hardware, but (a) there's no record keeping for bandwidth;
47 * (b) in the common case that few endpoints are available, there
48 * is no mechanism to reuse endpoints to talk to multiple devices.
49 *
50 * RESULT: At one extreme, bandwidth can be overcommitted in
51 * some hardware configurations, no faults will be reported.
52 * At the other extreme, the bandwidth capabilities which do
53 * exist tend to be severely undercommitted. You can't yet hook
54 * up both a keyboard and a mouse to an external USB hub.
55 */
56
57/*
58 * This gets many kinds of configuration information:
59 * - Kconfig for everything user-configurable
60 * - platform_device for addressing, irq, and platform_data
61 * - platform_data is mostly for board-specific information
62 * (plus recentrly, SOC or family details)
63 *
64 * Most of the conditional compilation will (someday) vanish.
65 */
66
67#include <linux/module.h>
68#include <linux/kernel.h>
69#include <linux/sched.h>
70#include <linux/slab.h>
71#include <linux/list.h>
72#include <linux/kobject.h>
73#include <linux/prefetch.h>
74#include <linux/platform_device.h>
75#include <linux/io.h>
76#include <linux/iopoll.h>
77#include <linux/dma-mapping.h>
78#include <linux/usb.h>
79#include <linux/usb/of.h>
80
81#include "musb_core.h"
82#include "musb_trace.h"
83
84#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
85
86
87#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
88#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
89
90#define MUSB_VERSION "6.0"
91
92#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
93
94#define MUSB_DRIVER_NAME "musb-hdrc"
95const char musb_driver_name[] = MUSB_DRIVER_NAME;
96
97MODULE_DESCRIPTION(DRIVER_INFO);
98MODULE_AUTHOR(DRIVER_AUTHOR);
99MODULE_LICENSE("GPL");
100MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
101
102
103/*-------------------------------------------------------------------------*/
104
105static inline struct musb *dev_to_musb(struct device *dev)
106{
107 return dev_get_drvdata(dev);
108}
109
110enum musb_mode musb_get_mode(struct device *dev)
111{
112 enum usb_dr_mode mode;
113
114 mode = usb_get_dr_mode(dev);
115 switch (mode) {
116 case USB_DR_MODE_HOST:
117 return MUSB_HOST;
118 case USB_DR_MODE_PERIPHERAL:
119 return MUSB_PERIPHERAL;
120 case USB_DR_MODE_OTG:
121 case USB_DR_MODE_UNKNOWN:
122 default:
123 return MUSB_OTG;
124 }
125}
126EXPORT_SYMBOL_GPL(musb_get_mode);
127
128/*-------------------------------------------------------------------------*/
129
130static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
131{
132 void __iomem *addr = phy->io_priv;
133 int i = 0;
134 u8 r;
135 u8 power;
136 int ret;
137
138 pm_runtime_get_sync(phy->io_dev);
139
140 /* Make sure the transceiver is not in low power mode */
141 power = musb_readb(addr, MUSB_POWER);
142 power &= ~MUSB_POWER_SUSPENDM;
143 musb_writeb(addr, MUSB_POWER, power);
144
145 /* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
146 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
147 */
148
149 musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
150 musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
151 MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
152
153 while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
154 & MUSB_ULPI_REG_CMPLT)) {
155 i++;
156 if (i == 10000) {
157 ret = -ETIMEDOUT;
158 goto out;
159 }
160
161 }
162 r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
163 r &= ~MUSB_ULPI_REG_CMPLT;
164 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
165
166 ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
167
168out:
169 pm_runtime_put(phy->io_dev);
170
171 return ret;
172}
173
174static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
175{
176 void __iomem *addr = phy->io_priv;
177 int i = 0;
178 u8 r = 0;
179 u8 power;
180 int ret = 0;
181
182 pm_runtime_get_sync(phy->io_dev);
183
184 /* Make sure the transceiver is not in low power mode */
185 power = musb_readb(addr, MUSB_POWER);
186 power &= ~MUSB_POWER_SUSPENDM;
187 musb_writeb(addr, MUSB_POWER, power);
188
189 musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
190 musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val);
191 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
192
193 while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
194 & MUSB_ULPI_REG_CMPLT)) {
195 i++;
196 if (i == 10000) {
197 ret = -ETIMEDOUT;
198 goto out;
199 }
200 }
201
202 r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
203 r &= ~MUSB_ULPI_REG_CMPLT;
204 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
205
206out:
207 pm_runtime_put(phy->io_dev);
208
209 return ret;
210}
211
212static struct usb_phy_io_ops musb_ulpi_access = {
213 .read = musb_ulpi_read,
214 .write = musb_ulpi_write,
215};
216
217/*-------------------------------------------------------------------------*/
218
219static u32 musb_default_fifo_offset(u8 epnum)
220{
221 return 0x20 + (epnum * 4);
222}
223
224/* "flat" mapping: each endpoint has its own i/o address */
225static void musb_flat_ep_select(void __iomem *mbase, u8 epnum)
226{
227}
228
229static u32 musb_flat_ep_offset(u8 epnum, u16 offset)
230{
231 return 0x100 + (0x10 * epnum) + offset;
232}
233
234/* "indexed" mapping: INDEX register controls register bank select */
235static void musb_indexed_ep_select(void __iomem *mbase, u8 epnum)
236{
237 musb_writeb(mbase, MUSB_INDEX, epnum);
238}
239
240static u32 musb_indexed_ep_offset(u8 epnum, u16 offset)
241{
242 return 0x10 + offset;
243}
244
245static u32 musb_default_busctl_offset(u8 epnum, u16 offset)
246{
247 return 0x80 + (0x08 * epnum) + offset;
248}
249
250static u8 musb_default_readb(void __iomem *addr, u32 offset)
251{
252 u8 data = __raw_readb(addr + offset);
253
254 trace_musb_readb(__builtin_return_address(0), addr, offset, data);
255 return data;
256}
257
258static void musb_default_writeb(void __iomem *addr, u32 offset, u8 data)
259{
260 trace_musb_writeb(__builtin_return_address(0), addr, offset, data);
261 __raw_writeb(data, addr + offset);
262}
263
264static u16 musb_default_readw(void __iomem *addr, u32 offset)
265{
266 u16 data = __raw_readw(addr + offset);
267
268 trace_musb_readw(__builtin_return_address(0), addr, offset, data);
269 return data;
270}
271
272static void musb_default_writew(void __iomem *addr, u32 offset, u16 data)
273{
274 trace_musb_writew(__builtin_return_address(0), addr, offset, data);
275 __raw_writew(data, addr + offset);
276}
277
278static u16 musb_default_get_toggle(struct musb_qh *qh, int is_out)
279{
280 void __iomem *epio = qh->hw_ep->regs;
281 u16 csr;
282
283 if (is_out)
284 csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
285 else
286 csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
287
288 return csr;
289}
290
291static u16 musb_default_set_toggle(struct musb_qh *qh, int is_out,
292 struct urb *urb)
293{
294 u16 csr;
295 u16 toggle;
296
297 toggle = usb_gettoggle(urb->dev, qh->epnum, is_out);
298
299 if (is_out)
300 csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
301 | MUSB_TXCSR_H_DATATOGGLE)
302 : MUSB_TXCSR_CLRDATATOG;
303 else
304 csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
305 | MUSB_RXCSR_H_DATATOGGLE) : 0;
306
307 return csr;
308}
309
310/*
311 * Load an endpoint's FIFO
312 */
313static void musb_default_write_fifo(struct musb_hw_ep *hw_ep, u16 len,
314 const u8 *src)
315{
316 struct musb *musb = hw_ep->musb;
317 void __iomem *fifo = hw_ep->fifo;
318
319 if (unlikely(len == 0))
320 return;
321
322 prefetch((u8 *)src);
323
324 dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
325 'T', hw_ep->epnum, fifo, len, src);
326
327 /* we can't assume unaligned reads work */
328 if (likely((0x01 & (unsigned long) src) == 0)) {
329 u16 index = 0;
330
331 /* best case is 32bit-aligned source address */
332 if ((0x02 & (unsigned long) src) == 0) {
333 if (len >= 4) {
334 iowrite32_rep(fifo, src + index, len >> 2);
335 index += len & ~0x03;
336 }
337 if (len & 0x02) {
338 __raw_writew(*(u16 *)&src[index], fifo);
339 index += 2;
340 }
341 } else {
342 if (len >= 2) {
343 iowrite16_rep(fifo, src + index, len >> 1);
344 index += len & ~0x01;
345 }
346 }
347 if (len & 0x01)
348 __raw_writeb(src[index], fifo);
349 } else {
350 /* byte aligned */
351 iowrite8_rep(fifo, src, len);
352 }
353}
354
355/*
356 * Unload an endpoint's FIFO
357 */
358static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
359{
360 struct musb *musb = hw_ep->musb;
361 void __iomem *fifo = hw_ep->fifo;
362
363 if (unlikely(len == 0))
364 return;
365
366 dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
367 'R', hw_ep->epnum, fifo, len, dst);
368
369 /* we can't assume unaligned writes work */
370 if (likely((0x01 & (unsigned long) dst) == 0)) {
371 u16 index = 0;
372
373 /* best case is 32bit-aligned destination address */
374 if ((0x02 & (unsigned long) dst) == 0) {
375 if (len >= 4) {
376 ioread32_rep(fifo, dst, len >> 2);
377 index = len & ~0x03;
378 }
379 if (len & 0x02) {
380 *(u16 *)&dst[index] = __raw_readw(fifo);
381 index += 2;
382 }
383 } else {
384 if (len >= 2) {
385 ioread16_rep(fifo, dst, len >> 1);
386 index = len & ~0x01;
387 }
388 }
389 if (len & 0x01)
390 dst[index] = __raw_readb(fifo);
391 } else {
392 /* byte aligned */
393 ioread8_rep(fifo, dst, len);
394 }
395}
396
397/*
398 * Old style IO functions
399 */
400u8 (*musb_readb)(void __iomem *addr, u32 offset);
401EXPORT_SYMBOL_GPL(musb_readb);
402
403void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data);
404EXPORT_SYMBOL_GPL(musb_writeb);
405
406u8 (*musb_clearb)(void __iomem *addr, u32 offset);
407EXPORT_SYMBOL_GPL(musb_clearb);
408
409u16 (*musb_readw)(void __iomem *addr, u32 offset);
410EXPORT_SYMBOL_GPL(musb_readw);
411
412void (*musb_writew)(void __iomem *addr, u32 offset, u16 data);
413EXPORT_SYMBOL_GPL(musb_writew);
414
415u16 (*musb_clearw)(void __iomem *addr, u32 offset);
416EXPORT_SYMBOL_GPL(musb_clearw);
417
418u32 musb_readl(void __iomem *addr, u32 offset)
419{
420 u32 data = __raw_readl(addr + offset);
421
422 trace_musb_readl(__builtin_return_address(0), addr, offset, data);
423 return data;
424}
425EXPORT_SYMBOL_GPL(musb_readl);
426
427void musb_writel(void __iomem *addr, u32 offset, u32 data)
428{
429 trace_musb_writel(__builtin_return_address(0), addr, offset, data);
430 __raw_writel(data, addr + offset);
431}
432EXPORT_SYMBOL_GPL(musb_writel);
433
434#ifndef CONFIG_MUSB_PIO_ONLY
435struct dma_controller *
436(*musb_dma_controller_create)(struct musb *musb, void __iomem *base);
437EXPORT_SYMBOL(musb_dma_controller_create);
438
439void (*musb_dma_controller_destroy)(struct dma_controller *c);
440EXPORT_SYMBOL(musb_dma_controller_destroy);
441#endif
442
443/*
444 * New style IO functions
445 */
446void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
447{
448 return hw_ep->musb->io.read_fifo(hw_ep, len, dst);
449}
450
451void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
452{
453 return hw_ep->musb->io.write_fifo(hw_ep, len, src);
454}
455
456static u8 musb_read_devctl(struct musb *musb)
457{
458 return musb_readb(musb->mregs, MUSB_DEVCTL);
459}
460
461/**
462 * musb_set_host - set and initialize host mode
463 * @musb: musb controller driver data
464 *
465 * At least some musb revisions need to enable devctl session bit in
466 * peripheral mode to switch to host mode. Initializes things to host
467 * mode and sets A_IDLE. SoC glue needs to advance state further
468 * based on phy provided VBUS state.
469 *
470 * Note that the SoC glue code may need to wait for musb to settle
471 * on enable before calling this to avoid babble.
472 */
473int musb_set_host(struct musb *musb)
474{
475 int error = 0;
476 u8 devctl;
477
478 if (!musb)
479 return -EINVAL;
480
481 devctl = musb_read_devctl(musb);
482 if (!(devctl & MUSB_DEVCTL_BDEVICE)) {
483 trace_musb_state(musb, devctl, "Already in host mode");
484 goto init_data;
485 }
486
487 devctl |= MUSB_DEVCTL_SESSION;
488 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
489
490 error = readx_poll_timeout(musb_read_devctl, musb, devctl,
491 !(devctl & MUSB_DEVCTL_BDEVICE), 5000,
492 1000000);
493 if (error) {
494 dev_err(musb->controller, "%s: could not set host: %02x\n",
495 __func__, devctl);
496
497 return error;
498 }
499
500 devctl = musb_read_devctl(musb);
501 trace_musb_state(musb, devctl, "Host mode set");
502
503init_data:
504 musb->is_active = 1;
505 musb_set_state(musb, OTG_STATE_A_IDLE);
506 MUSB_HST_MODE(musb);
507
508 return error;
509}
510EXPORT_SYMBOL_GPL(musb_set_host);
511
512/**
513 * musb_set_peripheral - set and initialize peripheral mode
514 * @musb: musb controller driver data
515 *
516 * Clears devctl session bit and initializes things for peripheral
517 * mode and sets B_IDLE. SoC glue needs to advance state further
518 * based on phy provided VBUS state.
519 */
520int musb_set_peripheral(struct musb *musb)
521{
522 int error = 0;
523 u8 devctl;
524
525 if (!musb)
526 return -EINVAL;
527
528 devctl = musb_read_devctl(musb);
529 if (devctl & MUSB_DEVCTL_BDEVICE) {
530 trace_musb_state(musb, devctl, "Already in peripheral mode");
531 goto init_data;
532 }
533
534 devctl &= ~MUSB_DEVCTL_SESSION;
535 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
536
537 error = readx_poll_timeout(musb_read_devctl, musb, devctl,
538 devctl & MUSB_DEVCTL_BDEVICE, 5000,
539 1000000);
540 if (error) {
541 dev_err(musb->controller, "%s: could not set peripheral: %02x\n",
542 __func__, devctl);
543
544 return error;
545 }
546
547 devctl = musb_read_devctl(musb);
548 trace_musb_state(musb, devctl, "Peripheral mode set");
549
550init_data:
551 musb->is_active = 0;
552 musb_set_state(musb, OTG_STATE_B_IDLE);
553 MUSB_DEV_MODE(musb);
554
555 return error;
556}
557EXPORT_SYMBOL_GPL(musb_set_peripheral);
558
559/*-------------------------------------------------------------------------*/
560
561/* for high speed test mode; see USB 2.0 spec 7.1.20 */
562static const u8 musb_test_packet[53] = {
563 /* implicit SYNC then DATA0 to start */
564
565 /* JKJKJKJK x9 */
566 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
567 /* JJKKJJKK x8 */
568 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
569 /* JJJJKKKK x8 */
570 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
571 /* JJJJJJJKKKKKKK x8 */
572 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
573 /* JJJJJJJK x8 */
574 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
575 /* JKKKKKKK x10, JK */
576 0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
577
578 /* implicit CRC16 then EOP to end */
579};
580
581void musb_load_testpacket(struct musb *musb)
582{
583 void __iomem *regs = musb->endpoints[0].regs;
584
585 musb_ep_select(musb->mregs, 0);
586 musb_write_fifo(musb->control_ep,
587 sizeof(musb_test_packet), musb_test_packet);
588 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
589}
590
591/*-------------------------------------------------------------------------*/
592
593/*
594 * Handles OTG hnp timeouts, such as b_ase0_brst
595 */
596static void musb_otg_timer_func(struct timer_list *t)
597{
598 struct musb *musb = from_timer(musb, t, otg_timer);
599 unsigned long flags;
600
601 spin_lock_irqsave(&musb->lock, flags);
602 switch (musb_get_state(musb)) {
603 case OTG_STATE_B_WAIT_ACON:
604 musb_dbg(musb,
605 "HNP: b_wait_acon timeout; back to b_peripheral");
606 musb_g_disconnect(musb);
607 musb_set_state(musb, OTG_STATE_B_PERIPHERAL);
608 musb->is_active = 0;
609 break;
610 case OTG_STATE_A_SUSPEND:
611 case OTG_STATE_A_WAIT_BCON:
612 musb_dbg(musb, "HNP: %s timeout",
613 musb_otg_state_string(musb));
614 musb_platform_set_vbus(musb, 0);
615 musb_set_state(musb, OTG_STATE_A_WAIT_VFALL);
616 break;
617 default:
618 musb_dbg(musb, "HNP: Unhandled mode %s",
619 musb_otg_state_string(musb));
620 }
621 spin_unlock_irqrestore(&musb->lock, flags);
622}
623
624/*
625 * Stops the HNP transition. Caller must take care of locking.
626 */
627void musb_hnp_stop(struct musb *musb)
628{
629 struct usb_hcd *hcd = musb->hcd;
630 void __iomem *mbase = musb->mregs;
631 u8 reg;
632
633 musb_dbg(musb, "HNP: stop from %s", musb_otg_state_string(musb));
634
635 switch (musb_get_state(musb)) {
636 case OTG_STATE_A_PERIPHERAL:
637 musb_g_disconnect(musb);
638 musb_dbg(musb, "HNP: back to %s", musb_otg_state_string(musb));
639 break;
640 case OTG_STATE_B_HOST:
641 musb_dbg(musb, "HNP: Disabling HR");
642 if (hcd)
643 hcd->self.is_b_host = 0;
644 musb_set_state(musb, OTG_STATE_B_PERIPHERAL);
645 MUSB_DEV_MODE(musb);
646 reg = musb_readb(mbase, MUSB_POWER);
647 reg |= MUSB_POWER_SUSPENDM;
648 musb_writeb(mbase, MUSB_POWER, reg);
649 /* REVISIT: Start SESSION_REQUEST here? */
650 break;
651 default:
652 musb_dbg(musb, "HNP: Stopping in unknown state %s",
653 musb_otg_state_string(musb));
654 }
655
656 /*
657 * When returning to A state after HNP, avoid hub_port_rebounce(),
658 * which cause occasional OPT A "Did not receive reset after connect"
659 * errors.
660 */
661 musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
662}
663
664static void musb_recover_from_babble(struct musb *musb);
665
666static void musb_handle_intr_resume(struct musb *musb, u8 devctl)
667{
668 musb_dbg(musb, "RESUME (%s)", musb_otg_state_string(musb));
669
670 if (devctl & MUSB_DEVCTL_HM) {
671 switch (musb_get_state(musb)) {
672 case OTG_STATE_A_SUSPEND:
673 /* remote wakeup? */
674 musb->port1_status |=
675 (USB_PORT_STAT_C_SUSPEND << 16)
676 | MUSB_PORT_STAT_RESUME;
677 musb->rh_timer = jiffies
678 + msecs_to_jiffies(USB_RESUME_TIMEOUT);
679 musb_set_state(musb, OTG_STATE_A_HOST);
680 musb->is_active = 1;
681 musb_host_resume_root_hub(musb);
682 schedule_delayed_work(&musb->finish_resume_work,
683 msecs_to_jiffies(USB_RESUME_TIMEOUT));
684 break;
685 case OTG_STATE_B_WAIT_ACON:
686 musb_set_state(musb, OTG_STATE_B_PERIPHERAL);
687 musb->is_active = 1;
688 MUSB_DEV_MODE(musb);
689 break;
690 default:
691 WARNING("bogus %s RESUME (%s)\n",
692 "host",
693 musb_otg_state_string(musb));
694 }
695 } else {
696 switch (musb_get_state(musb)) {
697 case OTG_STATE_A_SUSPEND:
698 /* possibly DISCONNECT is upcoming */
699 musb_set_state(musb, OTG_STATE_A_HOST);
700 musb_host_resume_root_hub(musb);
701 break;
702 case OTG_STATE_B_WAIT_ACON:
703 case OTG_STATE_B_PERIPHERAL:
704 /* disconnect while suspended? we may
705 * not get a disconnect irq...
706 */
707 if ((devctl & MUSB_DEVCTL_VBUS)
708 != (3 << MUSB_DEVCTL_VBUS_SHIFT)
709 ) {
710 musb->int_usb |= MUSB_INTR_DISCONNECT;
711 musb->int_usb &= ~MUSB_INTR_SUSPEND;
712 break;
713 }
714 musb_g_resume(musb);
715 break;
716 case OTG_STATE_B_IDLE:
717 musb->int_usb &= ~MUSB_INTR_SUSPEND;
718 break;
719 default:
720 WARNING("bogus %s RESUME (%s)\n",
721 "peripheral",
722 musb_otg_state_string(musb));
723 }
724 }
725}
726
727/* return IRQ_HANDLED to tell the caller to return immediately */
728static irqreturn_t musb_handle_intr_sessreq(struct musb *musb, u8 devctl)
729{
730 void __iomem *mbase = musb->mregs;
731
732 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
733 && (devctl & MUSB_DEVCTL_BDEVICE)) {
734 musb_dbg(musb, "SessReq while on B state");
735 return IRQ_HANDLED;
736 }
737
738 musb_dbg(musb, "SESSION_REQUEST (%s)", musb_otg_state_string(musb));
739
740 /* IRQ arrives from ID pin sense or (later, if VBUS power
741 * is removed) SRP. responses are time critical:
742 * - turn on VBUS (with silicon-specific mechanism)
743 * - go through A_WAIT_VRISE
744 * - ... to A_WAIT_BCON.
745 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
746 */
747 musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
748 musb->ep0_stage = MUSB_EP0_START;
749 musb_set_state(musb, OTG_STATE_A_IDLE);
750 MUSB_HST_MODE(musb);
751 musb_platform_set_vbus(musb, 1);
752
753 return IRQ_NONE;
754}
755
756static void musb_handle_intr_vbuserr(struct musb *musb, u8 devctl)
757{
758 int ignore = 0;
759
760 /* During connection as an A-Device, we may see a short
761 * current spikes causing voltage drop, because of cable
762 * and peripheral capacitance combined with vbus draw.
763 * (So: less common with truly self-powered devices, where
764 * vbus doesn't act like a power supply.)
765 *
766 * Such spikes are short; usually less than ~500 usec, max
767 * of ~2 msec. That is, they're not sustained overcurrent
768 * errors, though they're reported using VBUSERROR irqs.
769 *
770 * Workarounds: (a) hardware: use self powered devices.
771 * (b) software: ignore non-repeated VBUS errors.
772 *
773 * REVISIT: do delays from lots of DEBUG_KERNEL checks
774 * make trouble here, keeping VBUS < 4.4V ?
775 */
776 switch (musb_get_state(musb)) {
777 case OTG_STATE_A_HOST:
778 /* recovery is dicey once we've gotten past the
779 * initial stages of enumeration, but if VBUS
780 * stayed ok at the other end of the link, and
781 * another reset is due (at least for high speed,
782 * to redo the chirp etc), it might work OK...
783 */
784 case OTG_STATE_A_WAIT_BCON:
785 case OTG_STATE_A_WAIT_VRISE:
786 if (musb->vbuserr_retry) {
787 void __iomem *mbase = musb->mregs;
788
789 musb->vbuserr_retry--;
790 ignore = 1;
791 devctl |= MUSB_DEVCTL_SESSION;
792 musb_writeb(mbase, MUSB_DEVCTL, devctl);
793 } else {
794 musb->port1_status |=
795 USB_PORT_STAT_OVERCURRENT
796 | (USB_PORT_STAT_C_OVERCURRENT << 16);
797 }
798 break;
799 default:
800 break;
801 }
802
803 dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller,
804 "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
805 musb_otg_state_string(musb),
806 devctl,
807 ({ char *s;
808 switch (devctl & MUSB_DEVCTL_VBUS) {
809 case 0 << MUSB_DEVCTL_VBUS_SHIFT:
810 s = "<SessEnd"; break;
811 case 1 << MUSB_DEVCTL_VBUS_SHIFT:
812 s = "<AValid"; break;
813 case 2 << MUSB_DEVCTL_VBUS_SHIFT:
814 s = "<VBusValid"; break;
815 /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
816 default:
817 s = "VALID"; break;
818 } s; }),
819 VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
820 musb->port1_status);
821
822 /* go through A_WAIT_VFALL then start a new session */
823 if (!ignore)
824 musb_platform_set_vbus(musb, 0);
825}
826
827static void musb_handle_intr_suspend(struct musb *musb, u8 devctl)
828{
829 musb_dbg(musb, "SUSPEND (%s) devctl %02x",
830 musb_otg_state_string(musb), devctl);
831
832 switch (musb_get_state(musb)) {
833 case OTG_STATE_A_PERIPHERAL:
834 /* We also come here if the cable is removed, since
835 * this silicon doesn't report ID-no-longer-grounded.
836 *
837 * We depend on T(a_wait_bcon) to shut us down, and
838 * hope users don't do anything dicey during this
839 * undesired detour through A_WAIT_BCON.
840 */
841 musb_hnp_stop(musb);
842 musb_host_resume_root_hub(musb);
843 musb_root_disconnect(musb);
844 musb_platform_try_idle(musb, jiffies
845 + msecs_to_jiffies(musb->a_wait_bcon
846 ? : OTG_TIME_A_WAIT_BCON));
847
848 break;
849 case OTG_STATE_B_IDLE:
850 if (!musb->is_active)
851 break;
852 fallthrough;
853 case OTG_STATE_B_PERIPHERAL:
854 musb_g_suspend(musb);
855 musb->is_active = musb->g.b_hnp_enable;
856 if (musb->is_active) {
857 musb_set_state(musb, OTG_STATE_B_WAIT_ACON);
858 musb_dbg(musb, "HNP: Setting timer for b_ase0_brst");
859 mod_timer(&musb->otg_timer, jiffies
860 + msecs_to_jiffies(
861 OTG_TIME_B_ASE0_BRST));
862 }
863 break;
864 case OTG_STATE_A_WAIT_BCON:
865 if (musb->a_wait_bcon != 0)
866 musb_platform_try_idle(musb, jiffies
867 + msecs_to_jiffies(musb->a_wait_bcon));
868 break;
869 case OTG_STATE_A_HOST:
870 musb_set_state(musb, OTG_STATE_A_SUSPEND);
871 musb->is_active = musb->hcd->self.b_hnp_enable;
872 break;
873 case OTG_STATE_B_HOST:
874 /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
875 musb_dbg(musb, "REVISIT: SUSPEND as B_HOST");
876 break;
877 default:
878 /* "should not happen" */
879 musb->is_active = 0;
880 break;
881 }
882}
883
884static void musb_handle_intr_connect(struct musb *musb, u8 devctl, u8 int_usb)
885{
886 struct usb_hcd *hcd = musb->hcd;
887
888 musb->is_active = 1;
889 musb->ep0_stage = MUSB_EP0_START;
890
891 musb->intrtxe = musb->epmask;
892 musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
893 musb->intrrxe = musb->epmask & 0xfffe;
894 musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe);
895 musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
896 musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
897 |USB_PORT_STAT_HIGH_SPEED
898 |USB_PORT_STAT_ENABLE
899 );
900 musb->port1_status |= USB_PORT_STAT_CONNECTION
901 |(USB_PORT_STAT_C_CONNECTION << 16);
902
903 /* high vs full speed is just a guess until after reset */
904 if (devctl & MUSB_DEVCTL_LSDEV)
905 musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
906
907 /* indicate new connection to OTG machine */
908 switch (musb_get_state(musb)) {
909 case OTG_STATE_B_PERIPHERAL:
910 if (int_usb & MUSB_INTR_SUSPEND) {
911 musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host");
912 int_usb &= ~MUSB_INTR_SUSPEND;
913 goto b_host;
914 } else
915 musb_dbg(musb, "CONNECT as b_peripheral???");
916 break;
917 case OTG_STATE_B_WAIT_ACON:
918 musb_dbg(musb, "HNP: CONNECT, now b_host");
919b_host:
920 musb_set_state(musb, OTG_STATE_B_HOST);
921 if (musb->hcd)
922 musb->hcd->self.is_b_host = 1;
923 del_timer(&musb->otg_timer);
924 break;
925 default:
926 if ((devctl & MUSB_DEVCTL_VBUS)
927 == (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
928 musb_set_state(musb, OTG_STATE_A_HOST);
929 if (hcd)
930 hcd->self.is_b_host = 0;
931 }
932 break;
933 }
934
935 musb_host_poke_root_hub(musb);
936
937 musb_dbg(musb, "CONNECT (%s) devctl %02x",
938 musb_otg_state_string(musb), devctl);
939}
940
941static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl)
942{
943 musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x",
944 musb_otg_state_string(musb),
945 MUSB_MODE(musb), devctl);
946
947 switch (musb_get_state(musb)) {
948 case OTG_STATE_A_HOST:
949 case OTG_STATE_A_SUSPEND:
950 musb_host_resume_root_hub(musb);
951 musb_root_disconnect(musb);
952 if (musb->a_wait_bcon != 0)
953 musb_platform_try_idle(musb, jiffies
954 + msecs_to_jiffies(musb->a_wait_bcon));
955 break;
956 case OTG_STATE_B_HOST:
957 /* REVISIT this behaves for "real disconnect"
958 * cases; make sure the other transitions from
959 * from B_HOST act right too. The B_HOST code
960 * in hnp_stop() is currently not used...
961 */
962 musb_root_disconnect(musb);
963 if (musb->hcd)
964 musb->hcd->self.is_b_host = 0;
965 musb_set_state(musb, OTG_STATE_B_PERIPHERAL);
966 MUSB_DEV_MODE(musb);
967 musb_g_disconnect(musb);
968 break;
969 case OTG_STATE_A_PERIPHERAL:
970 musb_hnp_stop(musb);
971 musb_root_disconnect(musb);
972 fallthrough;
973 case OTG_STATE_B_WAIT_ACON:
974 case OTG_STATE_B_PERIPHERAL:
975 case OTG_STATE_B_IDLE:
976 musb_g_disconnect(musb);
977 break;
978 default:
979 WARNING("unhandled DISCONNECT transition (%s)\n",
980 musb_otg_state_string(musb));
981 break;
982 }
983}
984
985/*
986 * mentor saves a bit: bus reset and babble share the same irq.
987 * only host sees babble; only peripheral sees bus reset.
988 */
989static void musb_handle_intr_reset(struct musb *musb)
990{
991 if (is_host_active(musb)) {
992 /*
993 * When BABBLE happens what we can depends on which
994 * platform MUSB is running, because some platforms
995 * implemented proprietary means for 'recovering' from
996 * Babble conditions. One such platform is AM335x. In
997 * most cases, however, the only thing we can do is
998 * drop the session.
999 */
1000 dev_err(musb->controller, "Babble\n");
1001 musb_recover_from_babble(musb);
1002 } else {
1003 musb_dbg(musb, "BUS RESET as %s", musb_otg_state_string(musb));
1004 switch (musb_get_state(musb)) {
1005 case OTG_STATE_A_SUSPEND:
1006 musb_g_reset(musb);
1007 fallthrough;
1008 case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
1009 /* never use invalid T(a_wait_bcon) */
1010 musb_dbg(musb, "HNP: in %s, %d msec timeout",
1011 musb_otg_state_string(musb),
1012 TA_WAIT_BCON(musb));
1013 mod_timer(&musb->otg_timer, jiffies
1014 + msecs_to_jiffies(TA_WAIT_BCON(musb)));
1015 break;
1016 case OTG_STATE_A_PERIPHERAL:
1017 del_timer(&musb->otg_timer);
1018 musb_g_reset(musb);
1019 break;
1020 case OTG_STATE_B_WAIT_ACON:
1021 musb_dbg(musb, "HNP: RESET (%s), to b_peripheral",
1022 musb_otg_state_string(musb));
1023 musb_set_state(musb, OTG_STATE_B_PERIPHERAL);
1024 musb_g_reset(musb);
1025 break;
1026 case OTG_STATE_B_IDLE:
1027 musb_set_state(musb, OTG_STATE_B_PERIPHERAL);
1028 fallthrough;
1029 case OTG_STATE_B_PERIPHERAL:
1030 musb_g_reset(musb);
1031 break;
1032 default:
1033 musb_dbg(musb, "Unhandled BUS RESET as %s",
1034 musb_otg_state_string(musb));
1035 }
1036 }
1037}
1038
1039/*
1040 * Interrupt Service Routine to record USB "global" interrupts.
1041 * Since these do not happen often and signify things of
1042 * paramount importance, it seems OK to check them individually;
1043 * the order of the tests is specified in the manual
1044 *
1045 * @param musb instance pointer
1046 * @param int_usb register contents
1047 * @param devctl
1048 */
1049
1050static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
1051 u8 devctl)
1052{
1053 irqreturn_t handled = IRQ_NONE;
1054
1055 musb_dbg(musb, "<== DevCtl=%02x, int_usb=0x%x", devctl, int_usb);
1056
1057 /* in host mode, the peripheral may issue remote wakeup.
1058 * in peripheral mode, the host may resume the link.
1059 * spurious RESUME irqs happen too, paired with SUSPEND.
1060 */
1061 if (int_usb & MUSB_INTR_RESUME) {
1062 musb_handle_intr_resume(musb, devctl);
1063 handled = IRQ_HANDLED;
1064 }
1065
1066 /* see manual for the order of the tests */
1067 if (int_usb & MUSB_INTR_SESSREQ) {
1068 if (musb_handle_intr_sessreq(musb, devctl))
1069 return IRQ_HANDLED;
1070 handled = IRQ_HANDLED;
1071 }
1072
1073 if (int_usb & MUSB_INTR_VBUSERROR) {
1074 musb_handle_intr_vbuserr(musb, devctl);
1075 handled = IRQ_HANDLED;
1076 }
1077
1078 if (int_usb & MUSB_INTR_SUSPEND) {
1079 musb_handle_intr_suspend(musb, devctl);
1080 handled = IRQ_HANDLED;
1081 }
1082
1083 if (int_usb & MUSB_INTR_CONNECT) {
1084 musb_handle_intr_connect(musb, devctl, int_usb);
1085 handled = IRQ_HANDLED;
1086 }
1087
1088 if (int_usb & MUSB_INTR_DISCONNECT) {
1089 musb_handle_intr_disconnect(musb, devctl);
1090 handled = IRQ_HANDLED;
1091 }
1092
1093 if (int_usb & MUSB_INTR_RESET) {
1094 musb_handle_intr_reset(musb);
1095 handled = IRQ_HANDLED;
1096 }
1097
1098#if 0
1099/* REVISIT ... this would be for multiplexing periodic endpoints, or
1100 * supporting transfer phasing to prevent exceeding ISO bandwidth
1101 * limits of a given frame or microframe.
1102 *
1103 * It's not needed for peripheral side, which dedicates endpoints;
1104 * though it _might_ use SOF irqs for other purposes.
1105 *
1106 * And it's not currently needed for host side, which also dedicates
1107 * endpoints, relies on TX/RX interval registers, and isn't claimed
1108 * to support ISO transfers yet.
1109 */
1110 if (int_usb & MUSB_INTR_SOF) {
1111 void __iomem *mbase = musb->mregs;
1112 struct musb_hw_ep *ep;
1113 u8 epnum;
1114 u16 frame;
1115
1116 dev_dbg(musb->controller, "START_OF_FRAME\n");
1117 handled = IRQ_HANDLED;
1118
1119 /* start any periodic Tx transfers waiting for current frame */
1120 frame = musb_readw(mbase, MUSB_FRAME);
1121 ep = musb->endpoints;
1122 for (epnum = 1; (epnum < musb->nr_endpoints)
1123 && (musb->epmask >= (1 << epnum));
1124 epnum++, ep++) {
1125 /*
1126 * FIXME handle framecounter wraps (12 bits)
1127 * eliminate duplicated StartUrb logic
1128 */
1129 if (ep->dwWaitFrame >= frame) {
1130 ep->dwWaitFrame = 0;
1131 pr_debug("SOF --> periodic TX%s on %d\n",
1132 ep->tx_channel ? " DMA" : "",
1133 epnum);
1134 if (!ep->tx_channel)
1135 musb_h_tx_start(musb, epnum);
1136 else
1137 cppi_hostdma_start(musb, epnum);
1138 }
1139 } /* end of for loop */
1140 }
1141#endif
1142
1143 schedule_delayed_work(&musb->irq_work, 0);
1144
1145 return handled;
1146}
1147
1148/*-------------------------------------------------------------------------*/
1149
1150static void musb_disable_interrupts(struct musb *musb)
1151{
1152 void __iomem *mbase = musb->mregs;
1153
1154 /* disable interrupts */
1155 musb_writeb(mbase, MUSB_INTRUSBE, 0);
1156 musb->intrtxe = 0;
1157 musb_writew(mbase, MUSB_INTRTXE, 0);
1158 musb->intrrxe = 0;
1159 musb_writew(mbase, MUSB_INTRRXE, 0);
1160
1161 /* flush pending interrupts */
1162 musb_clearb(mbase, MUSB_INTRUSB);
1163 musb_clearw(mbase, MUSB_INTRTX);
1164 musb_clearw(mbase, MUSB_INTRRX);
1165}
1166
1167static void musb_enable_interrupts(struct musb *musb)
1168{
1169 void __iomem *regs = musb->mregs;
1170
1171 /* Set INT enable registers, enable interrupts */
1172 musb->intrtxe = musb->epmask;
1173 musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
1174 musb->intrrxe = musb->epmask & 0xfffe;
1175 musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
1176 musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
1177
1178}
1179
1180/*
1181 * Program the HDRC to start (enable interrupts, dma, etc.).
1182 */
1183void musb_start(struct musb *musb)
1184{
1185 void __iomem *regs = musb->mregs;
1186 u8 devctl = musb_readb(regs, MUSB_DEVCTL);
1187 u8 power;
1188
1189 musb_dbg(musb, "<== devctl %02x", devctl);
1190
1191 musb_enable_interrupts(musb);
1192 musb_writeb(regs, MUSB_TESTMODE, 0);
1193
1194 power = MUSB_POWER_ISOUPDATE;
1195 /*
1196 * treating UNKNOWN as unspecified maximum speed, in which case
1197 * we will default to high-speed.
1198 */
1199 if (musb->config->maximum_speed == USB_SPEED_HIGH ||
1200 musb->config->maximum_speed == USB_SPEED_UNKNOWN)
1201 power |= MUSB_POWER_HSENAB;
1202 musb_writeb(regs, MUSB_POWER, power);
1203
1204 musb->is_active = 0;
1205 devctl = musb_readb(regs, MUSB_DEVCTL);
1206 devctl &= ~MUSB_DEVCTL_SESSION;
1207
1208 /* session started after:
1209 * (a) ID-grounded irq, host mode;
1210 * (b) vbus present/connect IRQ, peripheral mode;
1211 * (c) peripheral initiates, using SRP
1212 */
1213 if (musb->port_mode != MUSB_HOST &&
1214 musb_get_state(musb) != OTG_STATE_A_WAIT_BCON &&
1215 (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
1216 musb->is_active = 1;
1217 } else {
1218 devctl |= MUSB_DEVCTL_SESSION;
1219 }
1220
1221 musb_platform_enable(musb);
1222 musb_writeb(regs, MUSB_DEVCTL, devctl);
1223}
1224
1225/*
1226 * Make the HDRC stop (disable interrupts, etc.);
1227 * reversible by musb_start
1228 * called on gadget driver unregister
1229 * with controller locked, irqs blocked
1230 * acts as a NOP unless some role activated the hardware
1231 */
1232void musb_stop(struct musb *musb)
1233{
1234 /* stop IRQs, timers, ... */
1235 musb_platform_disable(musb);
1236 musb_disable_interrupts(musb);
1237 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
1238
1239 /* FIXME
1240 * - mark host and/or peripheral drivers unusable/inactive
1241 * - disable DMA (and enable it in HdrcStart)
1242 * - make sure we can musb_start() after musb_stop(); with
1243 * OTG mode, gadget driver module rmmod/modprobe cycles that
1244 * - ...
1245 */
1246 musb_platform_try_idle(musb, 0);
1247}
1248
1249/*-------------------------------------------------------------------------*/
1250
1251/*
1252 * The silicon either has hard-wired endpoint configurations, or else
1253 * "dynamic fifo" sizing. The driver has support for both, though at this
1254 * writing only the dynamic sizing is very well tested. Since we switched
1255 * away from compile-time hardware parameters, we can no longer rely on
1256 * dead code elimination to leave only the relevant one in the object file.
1257 *
1258 * We don't currently use dynamic fifo setup capability to do anything
1259 * more than selecting one of a bunch of predefined configurations.
1260 */
1261static ushort fifo_mode;
1262
1263/* "modprobe ... fifo_mode=1" etc */
1264module_param(fifo_mode, ushort, 0);
1265MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
1266
1267/*
1268 * tables defining fifo_mode values. define more if you like.
1269 * for host side, make sure both halves of ep1 are set up.
1270 */
1271
1272/* mode 0 - fits in 2KB */
1273static struct musb_fifo_cfg mode_0_cfg[] = {
1274{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1275{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1276{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
1277{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1278{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1279};
1280
1281/* mode 1 - fits in 4KB */
1282static struct musb_fifo_cfg mode_1_cfg[] = {
1283{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1284{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1285{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1286{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1287{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1288};
1289
1290/* mode 2 - fits in 4KB */
1291static struct musb_fifo_cfg mode_2_cfg[] = {
1292{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1293{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1294{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1295{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1296{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 960, },
1297{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 1024, },
1298};
1299
1300/* mode 3 - fits in 4KB */
1301static struct musb_fifo_cfg mode_3_cfg[] = {
1302{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1303{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1304{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1305{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1306{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1307{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1308};
1309
1310/* mode 4 - fits in 16KB */
1311static struct musb_fifo_cfg mode_4_cfg[] = {
1312{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1313{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1314{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1315{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1316{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
1317{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
1318{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
1319{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
1320{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
1321{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
1322{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, },
1323{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, },
1324{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
1325{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, },
1326{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 512, },
1327{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
1328{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
1329{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
1330{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, },
1331{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
1332{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
1333{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, },
1334{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
1335{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, },
1336{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
1337{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1338{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1339};
1340
1341/* mode 5 - fits in 8KB */
1342static struct musb_fifo_cfg mode_5_cfg[] = {
1343{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1344{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1345{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1346{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1347{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
1348{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
1349{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
1350{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
1351{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
1352{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
1353{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, },
1354{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, },
1355{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, },
1356{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, },
1357{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, },
1358{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, },
1359{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, },
1360{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, },
1361{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, },
1362{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, },
1363{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, },
1364{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, },
1365{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, },
1366{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, },
1367{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
1368{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1369{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1370};
1371
1372/*
1373 * configure a fifo; for non-shared endpoints, this may be called
1374 * once for a tx fifo and once for an rx fifo.
1375 *
1376 * returns negative errno or offset for next fifo.
1377 */
1378static int
1379fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
1380 const struct musb_fifo_cfg *cfg, u16 offset)
1381{
1382 void __iomem *mbase = musb->mregs;
1383 int size = 0;
1384 u16 maxpacket = cfg->maxpacket;
1385 u16 c_off = offset >> 3;
1386 u8 c_size;
1387
1388 /* expect hw_ep has already been zero-initialized */
1389
1390 size = ffs(max(maxpacket, (u16) 8)) - 1;
1391 maxpacket = 1 << size;
1392
1393 c_size = size - 3;
1394 if (cfg->mode == BUF_DOUBLE) {
1395 if ((offset + (maxpacket << 1)) >
1396 (1 << (musb->config->ram_bits + 2)))
1397 return -EMSGSIZE;
1398 c_size |= MUSB_FIFOSZ_DPB;
1399 } else {
1400 if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
1401 return -EMSGSIZE;
1402 }
1403
1404 /* configure the FIFO */
1405 musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
1406
1407 /* EP0 reserved endpoint for control, bidirectional;
1408 * EP1 reserved for bulk, two unidirectional halves.
1409 */
1410 if (hw_ep->epnum == 1)
1411 musb->bulk_ep = hw_ep;
1412 /* REVISIT error check: be sure ep0 can both rx and tx ... */
1413 switch (cfg->style) {
1414 case FIFO_TX:
1415 musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
1416 musb_writew(mbase, MUSB_TXFIFOADD, c_off);
1417 hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1418 hw_ep->max_packet_sz_tx = maxpacket;
1419 break;
1420 case FIFO_RX:
1421 musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
1422 musb_writew(mbase, MUSB_RXFIFOADD, c_off);
1423 hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1424 hw_ep->max_packet_sz_rx = maxpacket;
1425 break;
1426 case FIFO_RXTX:
1427 musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
1428 musb_writew(mbase, MUSB_TXFIFOADD, c_off);
1429 hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1430 hw_ep->max_packet_sz_rx = maxpacket;
1431
1432 musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
1433 musb_writew(mbase, MUSB_RXFIFOADD, c_off);
1434 hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
1435 hw_ep->max_packet_sz_tx = maxpacket;
1436
1437 hw_ep->is_shared_fifo = true;
1438 break;
1439 }
1440
1441 /* NOTE rx and tx endpoint irqs aren't managed separately,
1442 * which happens to be ok
1443 */
1444 musb->epmask |= (1 << hw_ep->epnum);
1445
1446 return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
1447}
1448
1449static struct musb_fifo_cfg ep0_cfg = {
1450 .style = FIFO_RXTX, .maxpacket = 64,
1451};
1452
1453static int ep_config_from_table(struct musb *musb)
1454{
1455 const struct musb_fifo_cfg *cfg;
1456 unsigned i, n;
1457 int offset;
1458 struct musb_hw_ep *hw_ep = musb->endpoints;
1459
1460 if (musb->config->fifo_cfg) {
1461 cfg = musb->config->fifo_cfg;
1462 n = musb->config->fifo_cfg_size;
1463 goto done;
1464 }
1465
1466 switch (fifo_mode) {
1467 default:
1468 fifo_mode = 0;
1469 fallthrough;
1470 case 0:
1471 cfg = mode_0_cfg;
1472 n = ARRAY_SIZE(mode_0_cfg);
1473 break;
1474 case 1:
1475 cfg = mode_1_cfg;
1476 n = ARRAY_SIZE(mode_1_cfg);
1477 break;
1478 case 2:
1479 cfg = mode_2_cfg;
1480 n = ARRAY_SIZE(mode_2_cfg);
1481 break;
1482 case 3:
1483 cfg = mode_3_cfg;
1484 n = ARRAY_SIZE(mode_3_cfg);
1485 break;
1486 case 4:
1487 cfg = mode_4_cfg;
1488 n = ARRAY_SIZE(mode_4_cfg);
1489 break;
1490 case 5:
1491 cfg = mode_5_cfg;
1492 n = ARRAY_SIZE(mode_5_cfg);
1493 break;
1494 }
1495
1496 pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode);
1497
1498
1499done:
1500 offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
1501 /* assert(offset > 0) */
1502
1503 /* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would
1504 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
1505 */
1506
1507 for (i = 0; i < n; i++) {
1508 u8 epn = cfg->hw_ep_num;
1509
1510 if (epn >= musb->config->num_eps) {
1511 pr_debug("%s: invalid ep %d\n",
1512 musb_driver_name, epn);
1513 return -EINVAL;
1514 }
1515 offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
1516 if (offset < 0) {
1517 pr_debug("%s: mem overrun, ep %d\n",
1518 musb_driver_name, epn);
1519 return offset;
1520 }
1521 epn++;
1522 musb->nr_endpoints = max(epn, musb->nr_endpoints);
1523 }
1524
1525 pr_debug("%s: %d/%d max ep, %d/%d memory\n",
1526 musb_driver_name,
1527 n + 1, musb->config->num_eps * 2 - 1,
1528 offset, (1 << (musb->config->ram_bits + 2)));
1529
1530 if (!musb->bulk_ep) {
1531 pr_debug("%s: missing bulk\n", musb_driver_name);
1532 return -EINVAL;
1533 }
1534
1535 return 0;
1536}
1537
1538
1539/*
1540 * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
1541 * @param musb the controller
1542 */
1543static int ep_config_from_hw(struct musb *musb)
1544{
1545 u8 epnum = 0;
1546 struct musb_hw_ep *hw_ep;
1547 void __iomem *mbase = musb->mregs;
1548 int ret = 0;
1549
1550 musb_dbg(musb, "<== static silicon ep config");
1551
1552 /* FIXME pick up ep0 maxpacket size */
1553
1554 for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
1555 musb_ep_select(mbase, epnum);
1556 hw_ep = musb->endpoints + epnum;
1557
1558 ret = musb_read_fifosize(musb, hw_ep, epnum);
1559 if (ret < 0)
1560 break;
1561
1562 /* FIXME set up hw_ep->{rx,tx}_double_buffered */
1563
1564 /* pick an RX/TX endpoint for bulk */
1565 if (hw_ep->max_packet_sz_tx < 512
1566 || hw_ep->max_packet_sz_rx < 512)
1567 continue;
1568
1569 /* REVISIT: this algorithm is lazy, we should at least
1570 * try to pick a double buffered endpoint.
1571 */
1572 if (musb->bulk_ep)
1573 continue;
1574 musb->bulk_ep = hw_ep;
1575 }
1576
1577 if (!musb->bulk_ep) {
1578 pr_debug("%s: missing bulk\n", musb_driver_name);
1579 return -EINVAL;
1580 }
1581
1582 return 0;
1583}
1584
1585enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
1586
1587/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
1588 * configure endpoints, or take their config from silicon
1589 */
1590static int musb_core_init(u16 musb_type, struct musb *musb)
1591{
1592 u8 reg;
1593 char *type;
1594 char aInfo[90];
1595 void __iomem *mbase = musb->mregs;
1596 int status = 0;
1597 int i;
1598
1599 /* log core options (read using indexed model) */
1600 reg = musb_read_configdata(mbase);
1601
1602 strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
1603 if (reg & MUSB_CONFIGDATA_DYNFIFO) {
1604 strcat(aInfo, ", dyn FIFOs");
1605 musb->dyn_fifo = true;
1606 }
1607 if (reg & MUSB_CONFIGDATA_MPRXE) {
1608 strcat(aInfo, ", bulk combine");
1609 musb->bulk_combine = true;
1610 }
1611 if (reg & MUSB_CONFIGDATA_MPTXE) {
1612 strcat(aInfo, ", bulk split");
1613 musb->bulk_split = true;
1614 }
1615 if (reg & MUSB_CONFIGDATA_HBRXE) {
1616 strcat(aInfo, ", HB-ISO Rx");
1617 musb->hb_iso_rx = true;
1618 }
1619 if (reg & MUSB_CONFIGDATA_HBTXE) {
1620 strcat(aInfo, ", HB-ISO Tx");
1621 musb->hb_iso_tx = true;
1622 }
1623 if (reg & MUSB_CONFIGDATA_SOFTCONE)
1624 strcat(aInfo, ", SoftConn");
1625
1626 pr_debug("%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo);
1627
1628 if (MUSB_CONTROLLER_MHDRC == musb_type) {
1629 musb->is_multipoint = 1;
1630 type = "M";
1631 } else {
1632 musb->is_multipoint = 0;
1633 type = "";
1634 if (IS_ENABLED(CONFIG_USB) &&
1635 !IS_ENABLED(CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB)) {
1636 pr_err("%s: kernel must disable external hubs, please fix the configuration\n",
1637 musb_driver_name);
1638 }
1639 }
1640
1641 /* log release info */
1642 musb->hwvers = musb_readw(mbase, MUSB_HWVERS);
1643 pr_debug("%s: %sHDRC RTL version %d.%d%s\n",
1644 musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers),
1645 MUSB_HWVERS_MINOR(musb->hwvers),
1646 (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
1647
1648 /* configure ep0 */
1649 musb_configure_ep0(musb);
1650
1651 /* discover endpoint configuration */
1652 musb->nr_endpoints = 1;
1653 musb->epmask = 1;
1654
1655 if (musb->dyn_fifo)
1656 status = ep_config_from_table(musb);
1657 else
1658 status = ep_config_from_hw(musb);
1659
1660 if (status < 0)
1661 return status;
1662
1663 /* finish init, and print endpoint config */
1664 for (i = 0; i < musb->nr_endpoints; i++) {
1665 struct musb_hw_ep *hw_ep = musb->endpoints + i;
1666
1667 hw_ep->fifo = musb->io.fifo_offset(i) + mbase;
1668#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
1669 if (musb->ops->quirks & MUSB_IN_TUSB) {
1670 hw_ep->fifo_async = musb->async + 0x400 +
1671 musb->io.fifo_offset(i);
1672 hw_ep->fifo_sync = musb->sync + 0x400 +
1673 musb->io.fifo_offset(i);
1674 hw_ep->fifo_sync_va =
1675 musb->sync_va + 0x400 + musb->io.fifo_offset(i);
1676
1677 if (i == 0)
1678 hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
1679 else
1680 hw_ep->conf = mbase + 0x400 +
1681 (((i - 1) & 0xf) << 2);
1682 }
1683#endif
1684
1685 hw_ep->regs = musb->io.ep_offset(i, 0) + mbase;
1686 hw_ep->rx_reinit = 1;
1687 hw_ep->tx_reinit = 1;
1688
1689 if (hw_ep->max_packet_sz_tx) {
1690 musb_dbg(musb, "%s: hw_ep %d%s, %smax %d",
1691 musb_driver_name, i,
1692 hw_ep->is_shared_fifo ? "shared" : "tx",
1693 hw_ep->tx_double_buffered
1694 ? "doublebuffer, " : "",
1695 hw_ep->max_packet_sz_tx);
1696 }
1697 if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
1698 musb_dbg(musb, "%s: hw_ep %d%s, %smax %d",
1699 musb_driver_name, i,
1700 "rx",
1701 hw_ep->rx_double_buffered
1702 ? "doublebuffer, " : "",
1703 hw_ep->max_packet_sz_rx);
1704 }
1705 if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
1706 musb_dbg(musb, "hw_ep %d not configured", i);
1707 }
1708
1709 return 0;
1710}
1711
1712/*-------------------------------------------------------------------------*/
1713
1714/*
1715 * handle all the irqs defined by the HDRC core. for now we expect: other
1716 * irq sources (phy, dma, etc) will be handled first, musb->int_* values
1717 * will be assigned, and the irq will already have been acked.
1718 *
1719 * called in irq context with spinlock held, irqs blocked
1720 */
1721irqreturn_t musb_interrupt(struct musb *musb)
1722{
1723 irqreturn_t retval = IRQ_NONE;
1724 unsigned long status;
1725 unsigned long epnum;
1726 u8 devctl;
1727
1728 if (!musb->int_usb && !musb->int_tx && !musb->int_rx)
1729 return IRQ_NONE;
1730
1731 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1732
1733 trace_musb_isr(musb);
1734
1735 /**
1736 * According to Mentor Graphics' documentation, flowchart on page 98,
1737 * IRQ should be handled as follows:
1738 *
1739 * . Resume IRQ
1740 * . Session Request IRQ
1741 * . VBUS Error IRQ
1742 * . Suspend IRQ
1743 * . Connect IRQ
1744 * . Disconnect IRQ
1745 * . Reset/Babble IRQ
1746 * . SOF IRQ (we're not using this one)
1747 * . Endpoint 0 IRQ
1748 * . TX Endpoints
1749 * . RX Endpoints
1750 *
1751 * We will be following that flowchart in order to avoid any problems
1752 * that might arise with internal Finite State Machine.
1753 */
1754
1755 if (musb->int_usb)
1756 retval |= musb_stage0_irq(musb, musb->int_usb, devctl);
1757
1758 if (musb->int_tx & 1) {
1759 if (is_host_active(musb))
1760 retval |= musb_h_ep0_irq(musb);
1761 else
1762 retval |= musb_g_ep0_irq(musb);
1763
1764 /* we have just handled endpoint 0 IRQ, clear it */
1765 musb->int_tx &= ~BIT(0);
1766 }
1767
1768 status = musb->int_tx;
1769
1770 for_each_set_bit(epnum, &status, 16) {
1771 retval = IRQ_HANDLED;
1772 if (is_host_active(musb))
1773 musb_host_tx(musb, epnum);
1774 else
1775 musb_g_tx(musb, epnum);
1776 }
1777
1778 status = musb->int_rx;
1779
1780 for_each_set_bit(epnum, &status, 16) {
1781 retval = IRQ_HANDLED;
1782 if (is_host_active(musb))
1783 musb_host_rx(musb, epnum);
1784 else
1785 musb_g_rx(musb, epnum);
1786 }
1787
1788 return retval;
1789}
1790EXPORT_SYMBOL_GPL(musb_interrupt);
1791
1792#ifndef CONFIG_MUSB_PIO_ONLY
1793static bool use_dma = true;
1794
1795/* "modprobe ... use_dma=0" etc */
1796module_param(use_dma, bool, 0644);
1797MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
1798
1799void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
1800{
1801 /* called with controller lock already held */
1802
1803 if (!epnum) {
1804 if (!is_cppi_enabled(musb)) {
1805 /* endpoint 0 */
1806 if (is_host_active(musb))
1807 musb_h_ep0_irq(musb);
1808 else
1809 musb_g_ep0_irq(musb);
1810 }
1811 } else {
1812 /* endpoints 1..15 */
1813 if (transmit) {
1814 if (is_host_active(musb))
1815 musb_host_tx(musb, epnum);
1816 else
1817 musb_g_tx(musb, epnum);
1818 } else {
1819 /* receive */
1820 if (is_host_active(musb))
1821 musb_host_rx(musb, epnum);
1822 else
1823 musb_g_rx(musb, epnum);
1824 }
1825 }
1826}
1827EXPORT_SYMBOL_GPL(musb_dma_completion);
1828
1829#else
1830#define use_dma 0
1831#endif
1832
1833static int (*musb_phy_callback)(enum musb_vbus_id_status status);
1834
1835/*
1836 * musb_mailbox - optional phy notifier function
1837 * @status phy state change
1838 *
1839 * Optionally gets called from the USB PHY. Note that the USB PHY must be
1840 * disabled at the point the phy_callback is registered or unregistered.
1841 */
1842int musb_mailbox(enum musb_vbus_id_status status)
1843{
1844 if (musb_phy_callback)
1845 return musb_phy_callback(status);
1846
1847 return -ENODEV;
1848};
1849EXPORT_SYMBOL_GPL(musb_mailbox);
1850
1851/*-------------------------------------------------------------------------*/
1852
1853static ssize_t
1854mode_show(struct device *dev, struct device_attribute *attr, char *buf)
1855{
1856 struct musb *musb = dev_to_musb(dev);
1857 unsigned long flags;
1858 int ret;
1859
1860 spin_lock_irqsave(&musb->lock, flags);
1861 ret = sprintf(buf, "%s\n", musb_otg_state_string(musb));
1862 spin_unlock_irqrestore(&musb->lock, flags);
1863
1864 return ret;
1865}
1866
1867static ssize_t
1868mode_store(struct device *dev, struct device_attribute *attr,
1869 const char *buf, size_t n)
1870{
1871 struct musb *musb = dev_to_musb(dev);
1872 unsigned long flags;
1873 int status;
1874
1875 spin_lock_irqsave(&musb->lock, flags);
1876 if (sysfs_streq(buf, "host"))
1877 status = musb_platform_set_mode(musb, MUSB_HOST);
1878 else if (sysfs_streq(buf, "peripheral"))
1879 status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
1880 else if (sysfs_streq(buf, "otg"))
1881 status = musb_platform_set_mode(musb, MUSB_OTG);
1882 else
1883 status = -EINVAL;
1884 spin_unlock_irqrestore(&musb->lock, flags);
1885
1886 return (status == 0) ? n : status;
1887}
1888static DEVICE_ATTR_RW(mode);
1889
1890static ssize_t
1891vbus_store(struct device *dev, struct device_attribute *attr,
1892 const char *buf, size_t n)
1893{
1894 struct musb *musb = dev_to_musb(dev);
1895 unsigned long flags;
1896 unsigned long val;
1897
1898 if (sscanf(buf, "%lu", &val) < 1) {
1899 dev_err(dev, "Invalid VBUS timeout ms value\n");
1900 return -EINVAL;
1901 }
1902
1903 spin_lock_irqsave(&musb->lock, flags);
1904 /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
1905 musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
1906 if (musb_get_state(musb) == OTG_STATE_A_WAIT_BCON)
1907 musb->is_active = 0;
1908 musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
1909 spin_unlock_irqrestore(&musb->lock, flags);
1910
1911 return n;
1912}
1913
1914static ssize_t
1915vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
1916{
1917 struct musb *musb = dev_to_musb(dev);
1918 unsigned long flags;
1919 unsigned long val;
1920 int vbus;
1921 u8 devctl;
1922
1923 pm_runtime_get_sync(dev);
1924 spin_lock_irqsave(&musb->lock, flags);
1925 val = musb->a_wait_bcon;
1926 vbus = musb_platform_get_vbus_status(musb);
1927 if (vbus < 0) {
1928 /* Use default MUSB method by means of DEVCTL register */
1929 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1930 if ((devctl & MUSB_DEVCTL_VBUS)
1931 == (3 << MUSB_DEVCTL_VBUS_SHIFT))
1932 vbus = 1;
1933 else
1934 vbus = 0;
1935 }
1936 spin_unlock_irqrestore(&musb->lock, flags);
1937 pm_runtime_put_sync(dev);
1938
1939 return sprintf(buf, "Vbus %s, timeout %lu msec\n",
1940 vbus ? "on" : "off", val);
1941}
1942static DEVICE_ATTR_RW(vbus);
1943
1944/* Gadget drivers can't know that a host is connected so they might want
1945 * to start SRP, but users can. This allows userspace to trigger SRP.
1946 */
1947static ssize_t srp_store(struct device *dev, struct device_attribute *attr,
1948 const char *buf, size_t n)
1949{
1950 struct musb *musb = dev_to_musb(dev);
1951 unsigned short srp;
1952
1953 if (sscanf(buf, "%hu", &srp) != 1
1954 || (srp != 1)) {
1955 dev_err(dev, "SRP: Value must be 1\n");
1956 return -EINVAL;
1957 }
1958
1959 if (srp == 1)
1960 musb_g_wakeup(musb);
1961
1962 return n;
1963}
1964static DEVICE_ATTR_WO(srp);
1965
1966static struct attribute *musb_attrs[] = {
1967 &dev_attr_mode.attr,
1968 &dev_attr_vbus.attr,
1969 &dev_attr_srp.attr,
1970 NULL
1971};
1972ATTRIBUTE_GROUPS(musb);
1973
1974#define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \
1975 (2 << MUSB_DEVCTL_VBUS_SHIFT) | \
1976 MUSB_DEVCTL_SESSION)
1977#define MUSB_QUIRK_B_DISCONNECT_99 (MUSB_DEVCTL_BDEVICE | \
1978 (3 << MUSB_DEVCTL_VBUS_SHIFT) | \
1979 MUSB_DEVCTL_SESSION)
1980#define MUSB_QUIRK_A_DISCONNECT_19 ((3 << MUSB_DEVCTL_VBUS_SHIFT) | \
1981 MUSB_DEVCTL_SESSION)
1982
1983static bool musb_state_needs_recheck(struct musb *musb, u8 devctl,
1984 const char *desc)
1985{
1986 if (musb->quirk_retries && !musb->flush_irq_work) {
1987 trace_musb_state(musb, devctl, desc);
1988 schedule_delayed_work(&musb->irq_work,
1989 msecs_to_jiffies(1000));
1990 musb->quirk_retries--;
1991
1992 return true;
1993 }
1994
1995 return false;
1996}
1997
1998/*
1999 * Check the musb devctl session bit to determine if we want to
2000 * allow PM runtime for the device. In general, we want to keep things
2001 * active when the session bit is set except after host disconnect.
2002 *
2003 * Only called from musb_irq_work. If this ever needs to get called
2004 * elsewhere, proper locking must be implemented for musb->session.
2005 */
2006static void musb_pm_runtime_check_session(struct musb *musb)
2007{
2008 u8 devctl, s;
2009 int error;
2010
2011 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
2012
2013 /* Handle session status quirks first */
2014 s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV |
2015 MUSB_DEVCTL_HR;
2016 switch (devctl & ~s) {
2017 case MUSB_QUIRK_B_DISCONNECT_99:
2018 musb_state_needs_recheck(musb, devctl,
2019 "Poll devctl in case of suspend after disconnect");
2020 break;
2021 case MUSB_QUIRK_B_INVALID_VBUS_91:
2022 if (musb_state_needs_recheck(musb, devctl,
2023 "Poll devctl on invalid vbus, assume no session"))
2024 return;
2025 fallthrough;
2026 case MUSB_QUIRK_A_DISCONNECT_19:
2027 if (musb_state_needs_recheck(musb, devctl,
2028 "Poll devctl on possible host mode disconnect"))
2029 return;
2030 if (!musb->session)
2031 break;
2032 trace_musb_state(musb, devctl, "Allow PM on possible host mode disconnect");
2033 pm_runtime_mark_last_busy(musb->controller);
2034 pm_runtime_put_autosuspend(musb->controller);
2035 musb->session = false;
2036 return;
2037 default:
2038 break;
2039 }
2040
2041 /* No need to do anything if session has not changed */
2042 s = devctl & MUSB_DEVCTL_SESSION;
2043 if (s == musb->session)
2044 return;
2045
2046 /* Block PM or allow PM? */
2047 if (s) {
2048 trace_musb_state(musb, devctl, "Block PM on active session");
2049 error = pm_runtime_get_sync(musb->controller);
2050 if (error < 0)
2051 dev_err(musb->controller, "Could not enable: %i\n",
2052 error);
2053 musb->quirk_retries = 3;
2054
2055 /*
2056 * We can get a spurious MUSB_INTR_SESSREQ interrupt on start-up
2057 * in B-peripheral mode with nothing connected and the session
2058 * bit clears silently. Check status again in 3 seconds.
2059 */
2060 if (devctl & MUSB_DEVCTL_BDEVICE)
2061 schedule_delayed_work(&musb->irq_work,
2062 msecs_to_jiffies(3000));
2063 } else {
2064 trace_musb_state(musb, devctl, "Allow PM with no session");
2065 pm_runtime_mark_last_busy(musb->controller);
2066 pm_runtime_put_autosuspend(musb->controller);
2067 }
2068
2069 musb->session = s;
2070}
2071
2072/* Only used to provide driver mode change events */
2073static void musb_irq_work(struct work_struct *data)
2074{
2075 struct musb *musb = container_of(data, struct musb, irq_work.work);
2076 int error;
2077
2078 error = pm_runtime_resume_and_get(musb->controller);
2079 if (error < 0) {
2080 dev_err(musb->controller, "Could not enable: %i\n", error);
2081
2082 return;
2083 }
2084
2085 musb_pm_runtime_check_session(musb);
2086
2087 if (musb_get_state(musb) != musb->xceiv_old_state) {
2088 musb->xceiv_old_state = musb_get_state(musb);
2089 sysfs_notify(&musb->controller->kobj, NULL, "mode");
2090 }
2091
2092 pm_runtime_mark_last_busy(musb->controller);
2093 pm_runtime_put_autosuspend(musb->controller);
2094}
2095
2096static void musb_recover_from_babble(struct musb *musb)
2097{
2098 int ret;
2099 u8 devctl;
2100
2101 musb_disable_interrupts(musb);
2102
2103 /*
2104 * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give
2105 * it some slack and wait for 10us.
2106 */
2107 udelay(10);
2108
2109 ret = musb_platform_recover(musb);
2110 if (ret) {
2111 musb_enable_interrupts(musb);
2112 return;
2113 }
2114
2115 /* drop session bit */
2116 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
2117 devctl &= ~MUSB_DEVCTL_SESSION;
2118 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
2119
2120 /* tell usbcore about it */
2121 musb_root_disconnect(musb);
2122
2123 /*
2124 * When a babble condition occurs, the musb controller
2125 * removes the session bit and the endpoint config is lost.
2126 */
2127 if (musb->dyn_fifo)
2128 ret = ep_config_from_table(musb);
2129 else
2130 ret = ep_config_from_hw(musb);
2131
2132 /* restart session */
2133 if (ret == 0)
2134 musb_start(musb);
2135}
2136
2137/* --------------------------------------------------------------------------
2138 * Init support
2139 */
2140
2141static struct musb *allocate_instance(struct device *dev,
2142 const struct musb_hdrc_config *config, void __iomem *mbase)
2143{
2144 struct musb *musb;
2145 struct musb_hw_ep *ep;
2146 int epnum;
2147 int ret;
2148
2149 musb = devm_kzalloc(dev, sizeof(*musb), GFP_KERNEL);
2150 if (!musb)
2151 return NULL;
2152
2153 INIT_LIST_HEAD(&musb->control);
2154 INIT_LIST_HEAD(&musb->in_bulk);
2155 INIT_LIST_HEAD(&musb->out_bulk);
2156 INIT_LIST_HEAD(&musb->pending_list);
2157
2158 musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
2159 musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
2160 musb->mregs = mbase;
2161 musb->ctrl_base = mbase;
2162 musb->nIrq = -ENODEV;
2163 musb->config = config;
2164 BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS);
2165 for (epnum = 0, ep = musb->endpoints;
2166 epnum < musb->config->num_eps;
2167 epnum++, ep++) {
2168 ep->musb = musb;
2169 ep->epnum = epnum;
2170 }
2171
2172 musb->controller = dev;
2173
2174 ret = musb_host_alloc(musb);
2175 if (ret < 0)
2176 goto err_free;
2177
2178 dev_set_drvdata(dev, musb);
2179
2180 return musb;
2181
2182err_free:
2183 return NULL;
2184}
2185
2186static void musb_free(struct musb *musb)
2187{
2188 /* this has multiple entry modes. it handles fault cleanup after
2189 * probe(), where things may be partially set up, as well as rmmod
2190 * cleanup after everything's been de-activated.
2191 */
2192
2193 if (musb->nIrq >= 0) {
2194 if (musb->irq_wake)
2195 disable_irq_wake(musb->nIrq);
2196 free_irq(musb->nIrq, musb);
2197 }
2198
2199 musb_host_free(musb);
2200}
2201
2202struct musb_pending_work {
2203 int (*callback)(struct musb *musb, void *data);
2204 void *data;
2205 struct list_head node;
2206};
2207
2208#ifdef CONFIG_PM
2209/*
2210 * Called from musb_runtime_resume(), musb_resume(), and
2211 * musb_queue_resume_work(). Callers must take musb->lock.
2212 */
2213static int musb_run_resume_work(struct musb *musb)
2214{
2215 struct musb_pending_work *w, *_w;
2216 unsigned long flags;
2217 int error = 0;
2218
2219 spin_lock_irqsave(&musb->list_lock, flags);
2220 list_for_each_entry_safe(w, _w, &musb->pending_list, node) {
2221 if (w->callback) {
2222 error = w->callback(musb, w->data);
2223 if (error < 0) {
2224 dev_err(musb->controller,
2225 "resume callback %p failed: %i\n",
2226 w->callback, error);
2227 }
2228 }
2229 list_del(&w->node);
2230 devm_kfree(musb->controller, w);
2231 }
2232 spin_unlock_irqrestore(&musb->list_lock, flags);
2233
2234 return error;
2235}
2236#endif
2237
2238/*
2239 * Called to run work if device is active or else queue the work to happen
2240 * on resume. Caller must take musb->lock and must hold an RPM reference.
2241 *
2242 * Note that we cowardly refuse queuing work after musb PM runtime
2243 * resume is done calling musb_run_resume_work() and return -EINPROGRESS
2244 * instead.
2245 */
2246int musb_queue_resume_work(struct musb *musb,
2247 int (*callback)(struct musb *musb, void *data),
2248 void *data)
2249{
2250 struct musb_pending_work *w;
2251 unsigned long flags;
2252 bool is_suspended;
2253 int error;
2254
2255 if (WARN_ON(!callback))
2256 return -EINVAL;
2257
2258 spin_lock_irqsave(&musb->list_lock, flags);
2259 is_suspended = musb->is_runtime_suspended;
2260
2261 if (is_suspended) {
2262 w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC);
2263 if (!w) {
2264 error = -ENOMEM;
2265 goto out_unlock;
2266 }
2267
2268 w->callback = callback;
2269 w->data = data;
2270
2271 list_add_tail(&w->node, &musb->pending_list);
2272 error = 0;
2273 }
2274
2275out_unlock:
2276 spin_unlock_irqrestore(&musb->list_lock, flags);
2277
2278 if (!is_suspended)
2279 error = callback(musb, data);
2280
2281 return error;
2282}
2283EXPORT_SYMBOL_GPL(musb_queue_resume_work);
2284
2285static void musb_deassert_reset(struct work_struct *work)
2286{
2287 struct musb *musb;
2288 unsigned long flags;
2289
2290 musb = container_of(work, struct musb, deassert_reset_work.work);
2291
2292 spin_lock_irqsave(&musb->lock, flags);
2293
2294 if (musb->port1_status & USB_PORT_STAT_RESET)
2295 musb_port_reset(musb, false);
2296
2297 spin_unlock_irqrestore(&musb->lock, flags);
2298}
2299
2300/*
2301 * Perform generic per-controller initialization.
2302 *
2303 * @dev: the controller (already clocked, etc)
2304 * @nIrq: IRQ number
2305 * @ctrl: virtual address of controller registers,
2306 * not yet corrected for platform-specific offsets
2307 */
2308static int
2309musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
2310{
2311 int status;
2312 struct musb *musb;
2313 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
2314
2315 /* The driver might handle more features than the board; OK.
2316 * Fail when the board needs a feature that's not enabled.
2317 */
2318 if (!plat) {
2319 dev_err(dev, "no platform_data?\n");
2320 status = -ENODEV;
2321 goto fail0;
2322 }
2323
2324 /* allocate */
2325 musb = allocate_instance(dev, plat->config, ctrl);
2326 if (!musb) {
2327 status = -ENOMEM;
2328 goto fail0;
2329 }
2330
2331 spin_lock_init(&musb->lock);
2332 spin_lock_init(&musb->list_lock);
2333 musb->min_power = plat->min_power;
2334 musb->ops = plat->platform_ops;
2335 musb->port_mode = plat->mode;
2336
2337 /*
2338 * Initialize the default IO functions. At least omap2430 needs
2339 * these early. We initialize the platform specific IO functions
2340 * later on.
2341 */
2342 musb_readb = musb_default_readb;
2343 musb_writeb = musb_default_writeb;
2344 musb_readw = musb_default_readw;
2345 musb_writew = musb_default_writew;
2346
2347 /* The musb_platform_init() call:
2348 * - adjusts musb->mregs
2349 * - sets the musb->isr
2350 * - may initialize an integrated transceiver
2351 * - initializes musb->xceiv, usually by otg_get_phy()
2352 * - stops powering VBUS
2353 *
2354 * There are various transceiver configurations.
2355 * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
2356 * external/discrete ones in various flavors (twl4030 family,
2357 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
2358 */
2359 status = musb_platform_init(musb);
2360 if (status < 0)
2361 goto fail1;
2362
2363 if (!musb->isr) {
2364 status = -ENODEV;
2365 goto fail2;
2366 }
2367
2368
2369 /* Most devices use indexed offset or flat offset */
2370 if (musb->ops->quirks & MUSB_INDEXED_EP) {
2371 musb->io.ep_offset = musb_indexed_ep_offset;
2372 musb->io.ep_select = musb_indexed_ep_select;
2373 } else {
2374 musb->io.ep_offset = musb_flat_ep_offset;
2375 musb->io.ep_select = musb_flat_ep_select;
2376 }
2377
2378 if (musb->ops->quirks & MUSB_G_NO_SKB_RESERVE)
2379 musb->g.quirk_avoids_skb_reserve = 1;
2380
2381 /* At least tusb6010 has its own offsets */
2382 if (musb->ops->ep_offset)
2383 musb->io.ep_offset = musb->ops->ep_offset;
2384 if (musb->ops->ep_select)
2385 musb->io.ep_select = musb->ops->ep_select;
2386
2387 if (musb->ops->fifo_mode)
2388 fifo_mode = musb->ops->fifo_mode;
2389 else
2390 fifo_mode = 4;
2391
2392 if (musb->ops->fifo_offset)
2393 musb->io.fifo_offset = musb->ops->fifo_offset;
2394 else
2395 musb->io.fifo_offset = musb_default_fifo_offset;
2396
2397 if (musb->ops->busctl_offset)
2398 musb->io.busctl_offset = musb->ops->busctl_offset;
2399 else
2400 musb->io.busctl_offset = musb_default_busctl_offset;
2401
2402 if (musb->ops->readb)
2403 musb_readb = musb->ops->readb;
2404 if (musb->ops->writeb)
2405 musb_writeb = musb->ops->writeb;
2406 if (musb->ops->clearb)
2407 musb_clearb = musb->ops->clearb;
2408 else
2409 musb_clearb = musb_readb;
2410
2411 if (musb->ops->readw)
2412 musb_readw = musb->ops->readw;
2413 if (musb->ops->writew)
2414 musb_writew = musb->ops->writew;
2415 if (musb->ops->clearw)
2416 musb_clearw = musb->ops->clearw;
2417 else
2418 musb_clearw = musb_readw;
2419
2420#ifndef CONFIG_MUSB_PIO_ONLY
2421 if (!musb->ops->dma_init || !musb->ops->dma_exit) {
2422 dev_err(dev, "DMA controller not set\n");
2423 status = -ENODEV;
2424 goto fail2;
2425 }
2426 musb_dma_controller_create = musb->ops->dma_init;
2427 musb_dma_controller_destroy = musb->ops->dma_exit;
2428#endif
2429
2430 if (musb->ops->read_fifo)
2431 musb->io.read_fifo = musb->ops->read_fifo;
2432 else
2433 musb->io.read_fifo = musb_default_read_fifo;
2434
2435 if (musb->ops->write_fifo)
2436 musb->io.write_fifo = musb->ops->write_fifo;
2437 else
2438 musb->io.write_fifo = musb_default_write_fifo;
2439
2440 if (musb->ops->get_toggle)
2441 musb->io.get_toggle = musb->ops->get_toggle;
2442 else
2443 musb->io.get_toggle = musb_default_get_toggle;
2444
2445 if (musb->ops->set_toggle)
2446 musb->io.set_toggle = musb->ops->set_toggle;
2447 else
2448 musb->io.set_toggle = musb_default_set_toggle;
2449
2450 if (IS_ENABLED(CONFIG_USB_PHY) && musb->xceiv && !musb->xceiv->io_ops) {
2451 musb->xceiv->io_dev = musb->controller;
2452 musb->xceiv->io_priv = musb->mregs;
2453 musb->xceiv->io_ops = &musb_ulpi_access;
2454 }
2455
2456 if (musb->ops->phy_callback)
2457 musb_phy_callback = musb->ops->phy_callback;
2458
2459 /*
2460 * We need musb_read/write functions initialized for PM.
2461 * Note that at least 2430 glue needs autosuspend delay
2462 * somewhere above 300 ms for the hardware to idle properly
2463 * after disconnecting the cable in host mode. Let's use
2464 * 500 ms for some margin.
2465 */
2466 pm_runtime_use_autosuspend(musb->controller);
2467 pm_runtime_set_autosuspend_delay(musb->controller, 500);
2468 pm_runtime_enable(musb->controller);
2469 pm_runtime_get_sync(musb->controller);
2470
2471 status = usb_phy_init(musb->xceiv);
2472 if (status < 0)
2473 goto err_usb_phy_init;
2474
2475 if (use_dma && dev->dma_mask) {
2476 musb->dma_controller =
2477 musb_dma_controller_create(musb, musb->mregs);
2478 if (IS_ERR(musb->dma_controller)) {
2479 status = PTR_ERR(musb->dma_controller);
2480 goto fail2_5;
2481 }
2482 }
2483
2484 /* be sure interrupts are disabled before connecting ISR */
2485 musb_platform_disable(musb);
2486 musb_disable_interrupts(musb);
2487 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
2488
2489 /* MUSB_POWER_SOFTCONN might be already set, JZ4740 does this. */
2490 musb_writeb(musb->mregs, MUSB_POWER, 0);
2491
2492 /* Init IRQ workqueue before request_irq */
2493 INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
2494 INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
2495 INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
2496
2497 /* setup musb parts of the core (especially endpoints) */
2498 status = musb_core_init(plat->config->multipoint
2499 ? MUSB_CONTROLLER_MHDRC
2500 : MUSB_CONTROLLER_HDRC, musb);
2501 if (status < 0)
2502 goto fail3;
2503
2504 timer_setup(&musb->otg_timer, musb_otg_timer_func, 0);
2505
2506 /* attach to the IRQ */
2507 if (request_irq(nIrq, musb->isr, IRQF_SHARED, dev_name(dev), musb)) {
2508 dev_err(dev, "request_irq %d failed!\n", nIrq);
2509 status = -ENODEV;
2510 goto fail3;
2511 }
2512 musb->nIrq = nIrq;
2513 /* FIXME this handles wakeup irqs wrong */
2514 if (enable_irq_wake(nIrq) == 0) {
2515 musb->irq_wake = 1;
2516 device_init_wakeup(dev, 1);
2517 } else {
2518 musb->irq_wake = 0;
2519 }
2520
2521 /* program PHY to use external vBus if required */
2522 if (plat->extvbus) {
2523 u8 busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL);
2524 busctl |= MUSB_ULPI_USE_EXTVBUS;
2525 musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
2526 }
2527
2528 MUSB_DEV_MODE(musb);
2529 musb_set_state(musb, OTG_STATE_B_IDLE);
2530
2531 switch (musb->port_mode) {
2532 case MUSB_HOST:
2533 status = musb_host_setup(musb, plat->power);
2534 if (status < 0)
2535 goto fail3;
2536 status = musb_platform_set_mode(musb, MUSB_HOST);
2537 break;
2538 case MUSB_PERIPHERAL:
2539 status = musb_gadget_setup(musb);
2540 if (status < 0)
2541 goto fail3;
2542 status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
2543 break;
2544 case MUSB_OTG:
2545 status = musb_host_setup(musb, plat->power);
2546 if (status < 0)
2547 goto fail3;
2548 status = musb_gadget_setup(musb);
2549 if (status) {
2550 musb_host_cleanup(musb);
2551 goto fail3;
2552 }
2553 status = musb_platform_set_mode(musb, MUSB_OTG);
2554 break;
2555 default:
2556 dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
2557 break;
2558 }
2559
2560 if (status < 0)
2561 goto fail3;
2562
2563 musb_init_debugfs(musb);
2564
2565 musb->is_initialized = 1;
2566 pm_runtime_mark_last_busy(musb->controller);
2567 pm_runtime_put_autosuspend(musb->controller);
2568
2569 return 0;
2570
2571fail3:
2572 cancel_delayed_work_sync(&musb->irq_work);
2573 cancel_delayed_work_sync(&musb->finish_resume_work);
2574 cancel_delayed_work_sync(&musb->deassert_reset_work);
2575 if (musb->dma_controller)
2576 musb_dma_controller_destroy(musb->dma_controller);
2577
2578fail2_5:
2579 usb_phy_shutdown(musb->xceiv);
2580
2581err_usb_phy_init:
2582 pm_runtime_dont_use_autosuspend(musb->controller);
2583 pm_runtime_put_sync(musb->controller);
2584 pm_runtime_disable(musb->controller);
2585
2586fail2:
2587 if (musb->irq_wake)
2588 device_init_wakeup(dev, 0);
2589 musb_platform_exit(musb);
2590
2591fail1:
2592 dev_err_probe(musb->controller, status, "%s failed\n", __func__);
2593
2594 musb_free(musb);
2595
2596fail0:
2597
2598 return status;
2599
2600}
2601
2602/*-------------------------------------------------------------------------*/
2603
2604/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
2605 * bridge to a platform device; this driver then suffices.
2606 */
2607static int musb_probe(struct platform_device *pdev)
2608{
2609 struct device *dev = &pdev->dev;
2610 int irq = platform_get_irq_byname(pdev, "mc");
2611 void __iomem *base;
2612
2613 if (irq < 0)
2614 return irq;
2615
2616 base = devm_platform_ioremap_resource(pdev, 0);
2617 if (IS_ERR(base))
2618 return PTR_ERR(base);
2619
2620 return musb_init_controller(dev, irq, base);
2621}
2622
2623static void musb_remove(struct platform_device *pdev)
2624{
2625 struct device *dev = &pdev->dev;
2626 struct musb *musb = dev_to_musb(dev);
2627 unsigned long flags;
2628
2629 /* this gets called on rmmod.
2630 * - Host mode: host may still be active
2631 * - Peripheral mode: peripheral is deactivated (or never-activated)
2632 * - OTG mode: both roles are deactivated (or never-activated)
2633 */
2634 musb_exit_debugfs(musb);
2635
2636 cancel_delayed_work_sync(&musb->irq_work);
2637 cancel_delayed_work_sync(&musb->finish_resume_work);
2638 cancel_delayed_work_sync(&musb->deassert_reset_work);
2639 pm_runtime_get_sync(musb->controller);
2640 musb_host_cleanup(musb);
2641 musb_gadget_cleanup(musb);
2642
2643 musb_platform_disable(musb);
2644 spin_lock_irqsave(&musb->lock, flags);
2645 musb_disable_interrupts(musb);
2646 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
2647 spin_unlock_irqrestore(&musb->lock, flags);
2648 musb_platform_exit(musb);
2649
2650 pm_runtime_dont_use_autosuspend(musb->controller);
2651 pm_runtime_put_sync(musb->controller);
2652 pm_runtime_disable(musb->controller);
2653 musb_phy_callback = NULL;
2654 if (musb->dma_controller)
2655 musb_dma_controller_destroy(musb->dma_controller);
2656 usb_phy_shutdown(musb->xceiv);
2657 musb_free(musb);
2658 device_init_wakeup(dev, 0);
2659}
2660
2661#ifdef CONFIG_PM
2662
2663static void musb_save_context(struct musb *musb)
2664{
2665 int i;
2666 void __iomem *musb_base = musb->mregs;
2667 void __iomem *epio;
2668
2669 musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
2670 musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
2671 musb->context.busctl = musb_readb(musb_base, MUSB_ULPI_BUSCONTROL);
2672 musb->context.power = musb_readb(musb_base, MUSB_POWER);
2673 musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
2674 musb->context.index = musb_readb(musb_base, MUSB_INDEX);
2675 musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
2676
2677 for (i = 0; i < musb->config->num_eps; ++i) {
2678 epio = musb->endpoints[i].regs;
2679 if (!epio)
2680 continue;
2681
2682 musb_writeb(musb_base, MUSB_INDEX, i);
2683 musb->context.index_regs[i].txmaxp =
2684 musb_readw(epio, MUSB_TXMAXP);
2685 musb->context.index_regs[i].txcsr =
2686 musb_readw(epio, MUSB_TXCSR);
2687 musb->context.index_regs[i].rxmaxp =
2688 musb_readw(epio, MUSB_RXMAXP);
2689 musb->context.index_regs[i].rxcsr =
2690 musb_readw(epio, MUSB_RXCSR);
2691
2692 if (musb->dyn_fifo) {
2693 musb->context.index_regs[i].txfifoadd =
2694 musb_readw(musb_base, MUSB_TXFIFOADD);
2695 musb->context.index_regs[i].rxfifoadd =
2696 musb_readw(musb_base, MUSB_RXFIFOADD);
2697 musb->context.index_regs[i].txfifosz =
2698 musb_readb(musb_base, MUSB_TXFIFOSZ);
2699 musb->context.index_regs[i].rxfifosz =
2700 musb_readb(musb_base, MUSB_RXFIFOSZ);
2701 }
2702
2703 musb->context.index_regs[i].txtype =
2704 musb_readb(epio, MUSB_TXTYPE);
2705 musb->context.index_regs[i].txinterval =
2706 musb_readb(epio, MUSB_TXINTERVAL);
2707 musb->context.index_regs[i].rxtype =
2708 musb_readb(epio, MUSB_RXTYPE);
2709 musb->context.index_regs[i].rxinterval =
2710 musb_readb(epio, MUSB_RXINTERVAL);
2711
2712 musb->context.index_regs[i].txfunaddr =
2713 musb_read_txfunaddr(musb, i);
2714 musb->context.index_regs[i].txhubaddr =
2715 musb_read_txhubaddr(musb, i);
2716 musb->context.index_regs[i].txhubport =
2717 musb_read_txhubport(musb, i);
2718
2719 musb->context.index_regs[i].rxfunaddr =
2720 musb_read_rxfunaddr(musb, i);
2721 musb->context.index_regs[i].rxhubaddr =
2722 musb_read_rxhubaddr(musb, i);
2723 musb->context.index_regs[i].rxhubport =
2724 musb_read_rxhubport(musb, i);
2725 }
2726}
2727
2728static void musb_restore_context(struct musb *musb)
2729{
2730 int i;
2731 void __iomem *musb_base = musb->mregs;
2732 void __iomem *epio;
2733 u8 power;
2734
2735 musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
2736 musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
2737 musb_writeb(musb_base, MUSB_ULPI_BUSCONTROL, musb->context.busctl);
2738
2739 /* Don't affect SUSPENDM/RESUME bits in POWER reg */
2740 power = musb_readb(musb_base, MUSB_POWER);
2741 power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME;
2742 musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME);
2743 power |= musb->context.power;
2744 musb_writeb(musb_base, MUSB_POWER, power);
2745
2746 musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe);
2747 musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe);
2748 musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
2749 if (musb->context.devctl & MUSB_DEVCTL_SESSION)
2750 musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
2751
2752 for (i = 0; i < musb->config->num_eps; ++i) {
2753 epio = musb->endpoints[i].regs;
2754 if (!epio)
2755 continue;
2756
2757 musb_writeb(musb_base, MUSB_INDEX, i);
2758 musb_writew(epio, MUSB_TXMAXP,
2759 musb->context.index_regs[i].txmaxp);
2760 musb_writew(epio, MUSB_TXCSR,
2761 musb->context.index_regs[i].txcsr);
2762 musb_writew(epio, MUSB_RXMAXP,
2763 musb->context.index_regs[i].rxmaxp);
2764 musb_writew(epio, MUSB_RXCSR,
2765 musb->context.index_regs[i].rxcsr);
2766
2767 if (musb->dyn_fifo) {
2768 musb_writeb(musb_base, MUSB_TXFIFOSZ,
2769 musb->context.index_regs[i].txfifosz);
2770 musb_writeb(musb_base, MUSB_RXFIFOSZ,
2771 musb->context.index_regs[i].rxfifosz);
2772 musb_writew(musb_base, MUSB_TXFIFOADD,
2773 musb->context.index_regs[i].txfifoadd);
2774 musb_writew(musb_base, MUSB_RXFIFOADD,
2775 musb->context.index_regs[i].rxfifoadd);
2776 }
2777
2778 musb_writeb(epio, MUSB_TXTYPE,
2779 musb->context.index_regs[i].txtype);
2780 musb_writeb(epio, MUSB_TXINTERVAL,
2781 musb->context.index_regs[i].txinterval);
2782 musb_writeb(epio, MUSB_RXTYPE,
2783 musb->context.index_regs[i].rxtype);
2784 musb_writeb(epio, MUSB_RXINTERVAL,
2785
2786 musb->context.index_regs[i].rxinterval);
2787 musb_write_txfunaddr(musb, i,
2788 musb->context.index_regs[i].txfunaddr);
2789 musb_write_txhubaddr(musb, i,
2790 musb->context.index_regs[i].txhubaddr);
2791 musb_write_txhubport(musb, i,
2792 musb->context.index_regs[i].txhubport);
2793
2794 musb_write_rxfunaddr(musb, i,
2795 musb->context.index_regs[i].rxfunaddr);
2796 musb_write_rxhubaddr(musb, i,
2797 musb->context.index_regs[i].rxhubaddr);
2798 musb_write_rxhubport(musb, i,
2799 musb->context.index_regs[i].rxhubport);
2800 }
2801 musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
2802}
2803
2804static int musb_suspend(struct device *dev)
2805{
2806 struct musb *musb = dev_to_musb(dev);
2807 unsigned long flags;
2808 int ret;
2809
2810 ret = pm_runtime_get_sync(dev);
2811 if (ret < 0) {
2812 pm_runtime_put_noidle(dev);
2813 return ret;
2814 }
2815
2816 musb_platform_disable(musb);
2817 musb_disable_interrupts(musb);
2818
2819 musb->flush_irq_work = true;
2820 while (flush_delayed_work(&musb->irq_work))
2821 ;
2822 musb->flush_irq_work = false;
2823
2824 if (!(musb->ops->quirks & MUSB_PRESERVE_SESSION))
2825 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
2826
2827 WARN_ON(!list_empty(&musb->pending_list));
2828
2829 spin_lock_irqsave(&musb->lock, flags);
2830
2831 if (is_peripheral_active(musb)) {
2832 /* FIXME force disconnect unless we know USB will wake
2833 * the system up quickly enough to respond ...
2834 */
2835 } else if (is_host_active(musb)) {
2836 /* we know all the children are suspended; sometimes
2837 * they will even be wakeup-enabled.
2838 */
2839 }
2840
2841 musb_save_context(musb);
2842
2843 spin_unlock_irqrestore(&musb->lock, flags);
2844 return 0;
2845}
2846
2847static int musb_resume(struct device *dev)
2848{
2849 struct musb *musb = dev_to_musb(dev);
2850 unsigned long flags;
2851 int error;
2852 u8 devctl;
2853 u8 mask;
2854
2855 /*
2856 * For static cmos like DaVinci, register values were preserved
2857 * unless for some reason the whole soc powered down or the USB
2858 * module got reset through the PSC (vs just being disabled).
2859 *
2860 * For the DSPS glue layer though, a full register restore has to
2861 * be done. As it shouldn't harm other platforms, we do it
2862 * unconditionally.
2863 */
2864
2865 musb_restore_context(musb);
2866
2867 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
2868 mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV;
2869 if ((devctl & mask) != (musb->context.devctl & mask))
2870 musb->port1_status = 0;
2871
2872 musb_enable_interrupts(musb);
2873 musb_platform_enable(musb);
2874
2875 /* session might be disabled in suspend */
2876 if (musb->port_mode == MUSB_HOST &&
2877 !(musb->ops->quirks & MUSB_PRESERVE_SESSION)) {
2878 devctl |= MUSB_DEVCTL_SESSION;
2879 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
2880 }
2881
2882 spin_lock_irqsave(&musb->lock, flags);
2883 error = musb_run_resume_work(musb);
2884 if (error)
2885 dev_err(musb->controller, "resume work failed with %i\n",
2886 error);
2887 spin_unlock_irqrestore(&musb->lock, flags);
2888
2889 pm_runtime_mark_last_busy(dev);
2890 pm_runtime_put_autosuspend(dev);
2891
2892 return 0;
2893}
2894
2895static int musb_runtime_suspend(struct device *dev)
2896{
2897 struct musb *musb = dev_to_musb(dev);
2898
2899 musb_save_context(musb);
2900 musb->is_runtime_suspended = 1;
2901
2902 return 0;
2903}
2904
2905static int musb_runtime_resume(struct device *dev)
2906{
2907 struct musb *musb = dev_to_musb(dev);
2908 unsigned long flags;
2909 int error;
2910
2911 /*
2912 * When pm_runtime_get_sync called for the first time in driver
2913 * init, some of the structure is still not initialized which is
2914 * used in restore function. But clock needs to be
2915 * enabled before any register access, so
2916 * pm_runtime_get_sync has to be called.
2917 * Also context restore without save does not make
2918 * any sense
2919 */
2920 if (!musb->is_initialized)
2921 return 0;
2922
2923 musb_restore_context(musb);
2924
2925 spin_lock_irqsave(&musb->lock, flags);
2926 error = musb_run_resume_work(musb);
2927 if (error)
2928 dev_err(musb->controller, "resume work failed with %i\n",
2929 error);
2930 musb->is_runtime_suspended = 0;
2931 spin_unlock_irqrestore(&musb->lock, flags);
2932
2933 return 0;
2934}
2935
2936static const struct dev_pm_ops musb_dev_pm_ops = {
2937 .suspend = musb_suspend,
2938 .resume = musb_resume,
2939 .runtime_suspend = musb_runtime_suspend,
2940 .runtime_resume = musb_runtime_resume,
2941};
2942
2943#define MUSB_DEV_PM_OPS (&musb_dev_pm_ops)
2944#else
2945#define MUSB_DEV_PM_OPS NULL
2946#endif
2947
2948static struct platform_driver musb_driver = {
2949 .driver = {
2950 .name = musb_driver_name,
2951 .bus = &platform_bus_type,
2952 .pm = MUSB_DEV_PM_OPS,
2953 .dev_groups = musb_groups,
2954 },
2955 .probe = musb_probe,
2956 .remove_new = musb_remove,
2957};
2958
2959module_platform_driver(musb_driver);
1/*
2 * MUSB OTG driver core code
3 *
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 *
33 */
34
35/*
36 * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
37 *
38 * This consists of a Host Controller Driver (HCD) and a peripheral
39 * controller driver implementing the "Gadget" API; OTG support is
40 * in the works. These are normal Linux-USB controller drivers which
41 * use IRQs and have no dedicated thread.
42 *
43 * This version of the driver has only been used with products from
44 * Texas Instruments. Those products integrate the Inventra logic
45 * with other DMA, IRQ, and bus modules, as well as other logic that
46 * needs to be reflected in this driver.
47 *
48 *
49 * NOTE: the original Mentor code here was pretty much a collection
50 * of mechanisms that don't seem to have been fully integrated/working
51 * for *any* Linux kernel version. This version aims at Linux 2.6.now,
52 * Key open issues include:
53 *
54 * - Lack of host-side transaction scheduling, for all transfer types.
55 * The hardware doesn't do it; instead, software must.
56 *
57 * This is not an issue for OTG devices that don't support external
58 * hubs, but for more "normal" USB hosts it's a user issue that the
59 * "multipoint" support doesn't scale in the expected ways. That
60 * includes DaVinci EVM in a common non-OTG mode.
61 *
62 * * Control and bulk use dedicated endpoints, and there's as
63 * yet no mechanism to either (a) reclaim the hardware when
64 * peripherals are NAKing, which gets complicated with bulk
65 * endpoints, or (b) use more than a single bulk endpoint in
66 * each direction.
67 *
68 * RESULT: one device may be perceived as blocking another one.
69 *
70 * * Interrupt and isochronous will dynamically allocate endpoint
71 * hardware, but (a) there's no record keeping for bandwidth;
72 * (b) in the common case that few endpoints are available, there
73 * is no mechanism to reuse endpoints to talk to multiple devices.
74 *
75 * RESULT: At one extreme, bandwidth can be overcommitted in
76 * some hardware configurations, no faults will be reported.
77 * At the other extreme, the bandwidth capabilities which do
78 * exist tend to be severely undercommitted. You can't yet hook
79 * up both a keyboard and a mouse to an external USB hub.
80 */
81
82/*
83 * This gets many kinds of configuration information:
84 * - Kconfig for everything user-configurable
85 * - platform_device for addressing, irq, and platform_data
86 * - platform_data is mostly for board-specific informarion
87 * (plus recentrly, SOC or family details)
88 *
89 * Most of the conditional compilation will (someday) vanish.
90 */
91
92#include <linux/module.h>
93#include <linux/kernel.h>
94#include <linux/sched.h>
95#include <linux/slab.h>
96#include <linux/init.h>
97#include <linux/list.h>
98#include <linux/kobject.h>
99#include <linux/prefetch.h>
100#include <linux/platform_device.h>
101#include <linux/io.h>
102
103#include "musb_core.h"
104
105#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
106
107
108#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
109#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
110
111#define MUSB_VERSION "6.0"
112
113#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
114
115#define MUSB_DRIVER_NAME "musb-hdrc"
116const char musb_driver_name[] = MUSB_DRIVER_NAME;
117
118MODULE_DESCRIPTION(DRIVER_INFO);
119MODULE_AUTHOR(DRIVER_AUTHOR);
120MODULE_LICENSE("GPL");
121MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
122
123
124/*-------------------------------------------------------------------------*/
125
126static inline struct musb *dev_to_musb(struct device *dev)
127{
128 return dev_get_drvdata(dev);
129}
130
131/*-------------------------------------------------------------------------*/
132
133#ifndef CONFIG_BLACKFIN
134static int musb_ulpi_read(struct otg_transceiver *otg, u32 offset)
135{
136 void __iomem *addr = otg->io_priv;
137 int i = 0;
138 u8 r;
139 u8 power;
140
141 /* Make sure the transceiver is not in low power mode */
142 power = musb_readb(addr, MUSB_POWER);
143 power &= ~MUSB_POWER_SUSPENDM;
144 musb_writeb(addr, MUSB_POWER, power);
145
146 /* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
147 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
148 */
149
150 musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
151 musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
152 MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
153
154 while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
155 & MUSB_ULPI_REG_CMPLT)) {
156 i++;
157 if (i == 10000)
158 return -ETIMEDOUT;
159
160 }
161 r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
162 r &= ~MUSB_ULPI_REG_CMPLT;
163 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
164
165 return musb_readb(addr, MUSB_ULPI_REG_DATA);
166}
167
168static int musb_ulpi_write(struct otg_transceiver *otg,
169 u32 offset, u32 data)
170{
171 void __iomem *addr = otg->io_priv;
172 int i = 0;
173 u8 r = 0;
174 u8 power;
175
176 /* Make sure the transceiver is not in low power mode */
177 power = musb_readb(addr, MUSB_POWER);
178 power &= ~MUSB_POWER_SUSPENDM;
179 musb_writeb(addr, MUSB_POWER, power);
180
181 musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
182 musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
183 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
184
185 while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
186 & MUSB_ULPI_REG_CMPLT)) {
187 i++;
188 if (i == 10000)
189 return -ETIMEDOUT;
190 }
191
192 r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
193 r &= ~MUSB_ULPI_REG_CMPLT;
194 musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
195
196 return 0;
197}
198#else
199#define musb_ulpi_read NULL
200#define musb_ulpi_write NULL
201#endif
202
203static struct otg_io_access_ops musb_ulpi_access = {
204 .read = musb_ulpi_read,
205 .write = musb_ulpi_write,
206};
207
208/*-------------------------------------------------------------------------*/
209
210#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
211
212/*
213 * Load an endpoint's FIFO
214 */
215void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
216{
217 struct musb *musb = hw_ep->musb;
218 void __iomem *fifo = hw_ep->fifo;
219
220 prefetch((u8 *)src);
221
222 dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
223 'T', hw_ep->epnum, fifo, len, src);
224
225 /* we can't assume unaligned reads work */
226 if (likely((0x01 & (unsigned long) src) == 0)) {
227 u16 index = 0;
228
229 /* best case is 32bit-aligned source address */
230 if ((0x02 & (unsigned long) src) == 0) {
231 if (len >= 4) {
232 writesl(fifo, src + index, len >> 2);
233 index += len & ~0x03;
234 }
235 if (len & 0x02) {
236 musb_writew(fifo, 0, *(u16 *)&src[index]);
237 index += 2;
238 }
239 } else {
240 if (len >= 2) {
241 writesw(fifo, src + index, len >> 1);
242 index += len & ~0x01;
243 }
244 }
245 if (len & 0x01)
246 musb_writeb(fifo, 0, src[index]);
247 } else {
248 /* byte aligned */
249 writesb(fifo, src, len);
250 }
251}
252
253#if !defined(CONFIG_USB_MUSB_AM35X)
254/*
255 * Unload an endpoint's FIFO
256 */
257void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
258{
259 struct musb *musb = hw_ep->musb;
260 void __iomem *fifo = hw_ep->fifo;
261
262 dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
263 'R', hw_ep->epnum, fifo, len, dst);
264
265 /* we can't assume unaligned writes work */
266 if (likely((0x01 & (unsigned long) dst) == 0)) {
267 u16 index = 0;
268
269 /* best case is 32bit-aligned destination address */
270 if ((0x02 & (unsigned long) dst) == 0) {
271 if (len >= 4) {
272 readsl(fifo, dst, len >> 2);
273 index = len & ~0x03;
274 }
275 if (len & 0x02) {
276 *(u16 *)&dst[index] = musb_readw(fifo, 0);
277 index += 2;
278 }
279 } else {
280 if (len >= 2) {
281 readsw(fifo, dst, len >> 1);
282 index = len & ~0x01;
283 }
284 }
285 if (len & 0x01)
286 dst[index] = musb_readb(fifo, 0);
287 } else {
288 /* byte aligned */
289 readsb(fifo, dst, len);
290 }
291}
292#endif
293
294#endif /* normal PIO */
295
296
297/*-------------------------------------------------------------------------*/
298
299/* for high speed test mode; see USB 2.0 spec 7.1.20 */
300static const u8 musb_test_packet[53] = {
301 /* implicit SYNC then DATA0 to start */
302
303 /* JKJKJKJK x9 */
304 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
305 /* JJKKJJKK x8 */
306 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
307 /* JJJJKKKK x8 */
308 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
309 /* JJJJJJJKKKKKKK x8 */
310 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
311 /* JJJJJJJK x8 */
312 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
313 /* JKKKKKKK x10, JK */
314 0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
315
316 /* implicit CRC16 then EOP to end */
317};
318
319void musb_load_testpacket(struct musb *musb)
320{
321 void __iomem *regs = musb->endpoints[0].regs;
322
323 musb_ep_select(musb->mregs, 0);
324 musb_write_fifo(musb->control_ep,
325 sizeof(musb_test_packet), musb_test_packet);
326 musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
327}
328
329/*-------------------------------------------------------------------------*/
330
331/*
332 * Handles OTG hnp timeouts, such as b_ase0_brst
333 */
334void musb_otg_timer_func(unsigned long data)
335{
336 struct musb *musb = (struct musb *)data;
337 unsigned long flags;
338
339 spin_lock_irqsave(&musb->lock, flags);
340 switch (musb->xceiv->state) {
341 case OTG_STATE_B_WAIT_ACON:
342 dev_dbg(musb->controller, "HNP: b_wait_acon timeout; back to b_peripheral\n");
343 musb_g_disconnect(musb);
344 musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
345 musb->is_active = 0;
346 break;
347 case OTG_STATE_A_SUSPEND:
348 case OTG_STATE_A_WAIT_BCON:
349 dev_dbg(musb->controller, "HNP: %s timeout\n",
350 otg_state_string(musb->xceiv->state));
351 musb_platform_set_vbus(musb, 0);
352 musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
353 break;
354 default:
355 dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
356 otg_state_string(musb->xceiv->state));
357 }
358 musb->ignore_disconnect = 0;
359 spin_unlock_irqrestore(&musb->lock, flags);
360}
361
362/*
363 * Stops the HNP transition. Caller must take care of locking.
364 */
365void musb_hnp_stop(struct musb *musb)
366{
367 struct usb_hcd *hcd = musb_to_hcd(musb);
368 void __iomem *mbase = musb->mregs;
369 u8 reg;
370
371 dev_dbg(musb->controller, "HNP: stop from %s\n", otg_state_string(musb->xceiv->state));
372
373 switch (musb->xceiv->state) {
374 case OTG_STATE_A_PERIPHERAL:
375 musb_g_disconnect(musb);
376 dev_dbg(musb->controller, "HNP: back to %s\n",
377 otg_state_string(musb->xceiv->state));
378 break;
379 case OTG_STATE_B_HOST:
380 dev_dbg(musb->controller, "HNP: Disabling HR\n");
381 hcd->self.is_b_host = 0;
382 musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
383 MUSB_DEV_MODE(musb);
384 reg = musb_readb(mbase, MUSB_POWER);
385 reg |= MUSB_POWER_SUSPENDM;
386 musb_writeb(mbase, MUSB_POWER, reg);
387 /* REVISIT: Start SESSION_REQUEST here? */
388 break;
389 default:
390 dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n",
391 otg_state_string(musb->xceiv->state));
392 }
393
394 /*
395 * When returning to A state after HNP, avoid hub_port_rebounce(),
396 * which cause occasional OPT A "Did not receive reset after connect"
397 * errors.
398 */
399 musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
400}
401
402/*
403 * Interrupt Service Routine to record USB "global" interrupts.
404 * Since these do not happen often and signify things of
405 * paramount importance, it seems OK to check them individually;
406 * the order of the tests is specified in the manual
407 *
408 * @param musb instance pointer
409 * @param int_usb register contents
410 * @param devctl
411 * @param power
412 */
413
414static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
415 u8 devctl, u8 power)
416{
417 irqreturn_t handled = IRQ_NONE;
418
419 dev_dbg(musb->controller, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
420 int_usb);
421
422 /* in host mode, the peripheral may issue remote wakeup.
423 * in peripheral mode, the host may resume the link.
424 * spurious RESUME irqs happen too, paired with SUSPEND.
425 */
426 if (int_usb & MUSB_INTR_RESUME) {
427 handled = IRQ_HANDLED;
428 dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state));
429
430 if (devctl & MUSB_DEVCTL_HM) {
431 void __iomem *mbase = musb->mregs;
432
433 switch (musb->xceiv->state) {
434 case OTG_STATE_A_SUSPEND:
435 /* remote wakeup? later, GetPortStatus
436 * will stop RESUME signaling
437 */
438
439 if (power & MUSB_POWER_SUSPENDM) {
440 /* spurious */
441 musb->int_usb &= ~MUSB_INTR_SUSPEND;
442 dev_dbg(musb->controller, "Spurious SUSPENDM\n");
443 break;
444 }
445
446 power &= ~MUSB_POWER_SUSPENDM;
447 musb_writeb(mbase, MUSB_POWER,
448 power | MUSB_POWER_RESUME);
449
450 musb->port1_status |=
451 (USB_PORT_STAT_C_SUSPEND << 16)
452 | MUSB_PORT_STAT_RESUME;
453 musb->rh_timer = jiffies
454 + msecs_to_jiffies(20);
455
456 musb->xceiv->state = OTG_STATE_A_HOST;
457 musb->is_active = 1;
458 usb_hcd_resume_root_hub(musb_to_hcd(musb));
459 break;
460 case OTG_STATE_B_WAIT_ACON:
461 musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
462 musb->is_active = 1;
463 MUSB_DEV_MODE(musb);
464 break;
465 default:
466 WARNING("bogus %s RESUME (%s)\n",
467 "host",
468 otg_state_string(musb->xceiv->state));
469 }
470 } else {
471 switch (musb->xceiv->state) {
472 case OTG_STATE_A_SUSPEND:
473 /* possibly DISCONNECT is upcoming */
474 musb->xceiv->state = OTG_STATE_A_HOST;
475 usb_hcd_resume_root_hub(musb_to_hcd(musb));
476 break;
477 case OTG_STATE_B_WAIT_ACON:
478 case OTG_STATE_B_PERIPHERAL:
479 /* disconnect while suspended? we may
480 * not get a disconnect irq...
481 */
482 if ((devctl & MUSB_DEVCTL_VBUS)
483 != (3 << MUSB_DEVCTL_VBUS_SHIFT)
484 ) {
485 musb->int_usb |= MUSB_INTR_DISCONNECT;
486 musb->int_usb &= ~MUSB_INTR_SUSPEND;
487 break;
488 }
489 musb_g_resume(musb);
490 break;
491 case OTG_STATE_B_IDLE:
492 musb->int_usb &= ~MUSB_INTR_SUSPEND;
493 break;
494 default:
495 WARNING("bogus %s RESUME (%s)\n",
496 "peripheral",
497 otg_state_string(musb->xceiv->state));
498 }
499 }
500 }
501
502 /* see manual for the order of the tests */
503 if (int_usb & MUSB_INTR_SESSREQ) {
504 void __iomem *mbase = musb->mregs;
505
506 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
507 && (devctl & MUSB_DEVCTL_BDEVICE)) {
508 dev_dbg(musb->controller, "SessReq while on B state\n");
509 return IRQ_HANDLED;
510 }
511
512 dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n",
513 otg_state_string(musb->xceiv->state));
514
515 /* IRQ arrives from ID pin sense or (later, if VBUS power
516 * is removed) SRP. responses are time critical:
517 * - turn on VBUS (with silicon-specific mechanism)
518 * - go through A_WAIT_VRISE
519 * - ... to A_WAIT_BCON.
520 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
521 */
522 musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
523 musb->ep0_stage = MUSB_EP0_START;
524 musb->xceiv->state = OTG_STATE_A_IDLE;
525 MUSB_HST_MODE(musb);
526 musb_platform_set_vbus(musb, 1);
527
528 handled = IRQ_HANDLED;
529 }
530
531 if (int_usb & MUSB_INTR_VBUSERROR) {
532 int ignore = 0;
533
534 /* During connection as an A-Device, we may see a short
535 * current spikes causing voltage drop, because of cable
536 * and peripheral capacitance combined with vbus draw.
537 * (So: less common with truly self-powered devices, where
538 * vbus doesn't act like a power supply.)
539 *
540 * Such spikes are short; usually less than ~500 usec, max
541 * of ~2 msec. That is, they're not sustained overcurrent
542 * errors, though they're reported using VBUSERROR irqs.
543 *
544 * Workarounds: (a) hardware: use self powered devices.
545 * (b) software: ignore non-repeated VBUS errors.
546 *
547 * REVISIT: do delays from lots of DEBUG_KERNEL checks
548 * make trouble here, keeping VBUS < 4.4V ?
549 */
550 switch (musb->xceiv->state) {
551 case OTG_STATE_A_HOST:
552 /* recovery is dicey once we've gotten past the
553 * initial stages of enumeration, but if VBUS
554 * stayed ok at the other end of the link, and
555 * another reset is due (at least for high speed,
556 * to redo the chirp etc), it might work OK...
557 */
558 case OTG_STATE_A_WAIT_BCON:
559 case OTG_STATE_A_WAIT_VRISE:
560 if (musb->vbuserr_retry) {
561 void __iomem *mbase = musb->mregs;
562
563 musb->vbuserr_retry--;
564 ignore = 1;
565 devctl |= MUSB_DEVCTL_SESSION;
566 musb_writeb(mbase, MUSB_DEVCTL, devctl);
567 } else {
568 musb->port1_status |=
569 USB_PORT_STAT_OVERCURRENT
570 | (USB_PORT_STAT_C_OVERCURRENT << 16);
571 }
572 break;
573 default:
574 break;
575 }
576
577 dev_dbg(musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
578 otg_state_string(musb->xceiv->state),
579 devctl,
580 ({ char *s;
581 switch (devctl & MUSB_DEVCTL_VBUS) {
582 case 0 << MUSB_DEVCTL_VBUS_SHIFT:
583 s = "<SessEnd"; break;
584 case 1 << MUSB_DEVCTL_VBUS_SHIFT:
585 s = "<AValid"; break;
586 case 2 << MUSB_DEVCTL_VBUS_SHIFT:
587 s = "<VBusValid"; break;
588 /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
589 default:
590 s = "VALID"; break;
591 }; s; }),
592 VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
593 musb->port1_status);
594
595 /* go through A_WAIT_VFALL then start a new session */
596 if (!ignore)
597 musb_platform_set_vbus(musb, 0);
598 handled = IRQ_HANDLED;
599 }
600
601 if (int_usb & MUSB_INTR_SUSPEND) {
602 dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x power %02x\n",
603 otg_state_string(musb->xceiv->state), devctl, power);
604 handled = IRQ_HANDLED;
605
606 switch (musb->xceiv->state) {
607 case OTG_STATE_A_PERIPHERAL:
608 /* We also come here if the cable is removed, since
609 * this silicon doesn't report ID-no-longer-grounded.
610 *
611 * We depend on T(a_wait_bcon) to shut us down, and
612 * hope users don't do anything dicey during this
613 * undesired detour through A_WAIT_BCON.
614 */
615 musb_hnp_stop(musb);
616 usb_hcd_resume_root_hub(musb_to_hcd(musb));
617 musb_root_disconnect(musb);
618 musb_platform_try_idle(musb, jiffies
619 + msecs_to_jiffies(musb->a_wait_bcon
620 ? : OTG_TIME_A_WAIT_BCON));
621
622 break;
623 case OTG_STATE_B_IDLE:
624 if (!musb->is_active)
625 break;
626 case OTG_STATE_B_PERIPHERAL:
627 musb_g_suspend(musb);
628 musb->is_active = is_otg_enabled(musb)
629 && musb->xceiv->gadget->b_hnp_enable;
630 if (musb->is_active) {
631 musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
632 dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
633 mod_timer(&musb->otg_timer, jiffies
634 + msecs_to_jiffies(
635 OTG_TIME_B_ASE0_BRST));
636 }
637 break;
638 case OTG_STATE_A_WAIT_BCON:
639 if (musb->a_wait_bcon != 0)
640 musb_platform_try_idle(musb, jiffies
641 + msecs_to_jiffies(musb->a_wait_bcon));
642 break;
643 case OTG_STATE_A_HOST:
644 musb->xceiv->state = OTG_STATE_A_SUSPEND;
645 musb->is_active = is_otg_enabled(musb)
646 && musb->xceiv->host->b_hnp_enable;
647 break;
648 case OTG_STATE_B_HOST:
649 /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
650 dev_dbg(musb->controller, "REVISIT: SUSPEND as B_HOST\n");
651 break;
652 default:
653 /* "should not happen" */
654 musb->is_active = 0;
655 break;
656 }
657 }
658
659 if (int_usb & MUSB_INTR_CONNECT) {
660 struct usb_hcd *hcd = musb_to_hcd(musb);
661
662 handled = IRQ_HANDLED;
663 musb->is_active = 1;
664 set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
665
666 musb->ep0_stage = MUSB_EP0_START;
667
668 /* flush endpoints when transitioning from Device Mode */
669 if (is_peripheral_active(musb)) {
670 /* REVISIT HNP; just force disconnect */
671 }
672 musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
673 musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
674 musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
675 musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
676 |USB_PORT_STAT_HIGH_SPEED
677 |USB_PORT_STAT_ENABLE
678 );
679 musb->port1_status |= USB_PORT_STAT_CONNECTION
680 |(USB_PORT_STAT_C_CONNECTION << 16);
681
682 /* high vs full speed is just a guess until after reset */
683 if (devctl & MUSB_DEVCTL_LSDEV)
684 musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
685
686 /* indicate new connection to OTG machine */
687 switch (musb->xceiv->state) {
688 case OTG_STATE_B_PERIPHERAL:
689 if (int_usb & MUSB_INTR_SUSPEND) {
690 dev_dbg(musb->controller, "HNP: SUSPEND+CONNECT, now b_host\n");
691 int_usb &= ~MUSB_INTR_SUSPEND;
692 goto b_host;
693 } else
694 dev_dbg(musb->controller, "CONNECT as b_peripheral???\n");
695 break;
696 case OTG_STATE_B_WAIT_ACON:
697 dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n");
698b_host:
699 musb->xceiv->state = OTG_STATE_B_HOST;
700 hcd->self.is_b_host = 1;
701 musb->ignore_disconnect = 0;
702 del_timer(&musb->otg_timer);
703 break;
704 default:
705 if ((devctl & MUSB_DEVCTL_VBUS)
706 == (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
707 musb->xceiv->state = OTG_STATE_A_HOST;
708 hcd->self.is_b_host = 0;
709 }
710 break;
711 }
712
713 /* poke the root hub */
714 MUSB_HST_MODE(musb);
715 if (hcd->status_urb)
716 usb_hcd_poll_rh_status(hcd);
717 else
718 usb_hcd_resume_root_hub(hcd);
719
720 dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
721 otg_state_string(musb->xceiv->state), devctl);
722 }
723
724 if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
725 dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
726 otg_state_string(musb->xceiv->state),
727 MUSB_MODE(musb), devctl);
728 handled = IRQ_HANDLED;
729
730 switch (musb->xceiv->state) {
731 case OTG_STATE_A_HOST:
732 case OTG_STATE_A_SUSPEND:
733 usb_hcd_resume_root_hub(musb_to_hcd(musb));
734 musb_root_disconnect(musb);
735 if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
736 musb_platform_try_idle(musb, jiffies
737 + msecs_to_jiffies(musb->a_wait_bcon));
738 break;
739 case OTG_STATE_B_HOST:
740 /* REVISIT this behaves for "real disconnect"
741 * cases; make sure the other transitions from
742 * from B_HOST act right too. The B_HOST code
743 * in hnp_stop() is currently not used...
744 */
745 musb_root_disconnect(musb);
746 musb_to_hcd(musb)->self.is_b_host = 0;
747 musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
748 MUSB_DEV_MODE(musb);
749 musb_g_disconnect(musb);
750 break;
751 case OTG_STATE_A_PERIPHERAL:
752 musb_hnp_stop(musb);
753 musb_root_disconnect(musb);
754 /* FALLTHROUGH */
755 case OTG_STATE_B_WAIT_ACON:
756 /* FALLTHROUGH */
757 case OTG_STATE_B_PERIPHERAL:
758 case OTG_STATE_B_IDLE:
759 musb_g_disconnect(musb);
760 break;
761 default:
762 WARNING("unhandled DISCONNECT transition (%s)\n",
763 otg_state_string(musb->xceiv->state));
764 break;
765 }
766 }
767
768 /* mentor saves a bit: bus reset and babble share the same irq.
769 * only host sees babble; only peripheral sees bus reset.
770 */
771 if (int_usb & MUSB_INTR_RESET) {
772 handled = IRQ_HANDLED;
773 if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
774 /*
775 * Looks like non-HS BABBLE can be ignored, but
776 * HS BABBLE is an error condition. For HS the solution
777 * is to avoid babble in the first place and fix what
778 * caused BABBLE. When HS BABBLE happens we can only
779 * stop the session.
780 */
781 if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
782 dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl);
783 else {
784 ERR("Stopping host session -- babble\n");
785 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
786 }
787 } else if (is_peripheral_capable()) {
788 dev_dbg(musb->controller, "BUS RESET as %s\n",
789 otg_state_string(musb->xceiv->state));
790 switch (musb->xceiv->state) {
791 case OTG_STATE_A_SUSPEND:
792 /* We need to ignore disconnect on suspend
793 * otherwise tusb 2.0 won't reconnect after a
794 * power cycle, which breaks otg compliance.
795 */
796 musb->ignore_disconnect = 1;
797 musb_g_reset(musb);
798 /* FALLTHROUGH */
799 case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
800 /* never use invalid T(a_wait_bcon) */
801 dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n",
802 otg_state_string(musb->xceiv->state),
803 TA_WAIT_BCON(musb));
804 mod_timer(&musb->otg_timer, jiffies
805 + msecs_to_jiffies(TA_WAIT_BCON(musb)));
806 break;
807 case OTG_STATE_A_PERIPHERAL:
808 musb->ignore_disconnect = 0;
809 del_timer(&musb->otg_timer);
810 musb_g_reset(musb);
811 break;
812 case OTG_STATE_B_WAIT_ACON:
813 dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n",
814 otg_state_string(musb->xceiv->state));
815 musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
816 musb_g_reset(musb);
817 break;
818 case OTG_STATE_B_IDLE:
819 musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
820 /* FALLTHROUGH */
821 case OTG_STATE_B_PERIPHERAL:
822 musb_g_reset(musb);
823 break;
824 default:
825 dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n",
826 otg_state_string(musb->xceiv->state));
827 }
828 }
829 }
830
831#if 0
832/* REVISIT ... this would be for multiplexing periodic endpoints, or
833 * supporting transfer phasing to prevent exceeding ISO bandwidth
834 * limits of a given frame or microframe.
835 *
836 * It's not needed for peripheral side, which dedicates endpoints;
837 * though it _might_ use SOF irqs for other purposes.
838 *
839 * And it's not currently needed for host side, which also dedicates
840 * endpoints, relies on TX/RX interval registers, and isn't claimed
841 * to support ISO transfers yet.
842 */
843 if (int_usb & MUSB_INTR_SOF) {
844 void __iomem *mbase = musb->mregs;
845 struct musb_hw_ep *ep;
846 u8 epnum;
847 u16 frame;
848
849 dev_dbg(musb->controller, "START_OF_FRAME\n");
850 handled = IRQ_HANDLED;
851
852 /* start any periodic Tx transfers waiting for current frame */
853 frame = musb_readw(mbase, MUSB_FRAME);
854 ep = musb->endpoints;
855 for (epnum = 1; (epnum < musb->nr_endpoints)
856 && (musb->epmask >= (1 << epnum));
857 epnum++, ep++) {
858 /*
859 * FIXME handle framecounter wraps (12 bits)
860 * eliminate duplicated StartUrb logic
861 */
862 if (ep->dwWaitFrame >= frame) {
863 ep->dwWaitFrame = 0;
864 pr_debug("SOF --> periodic TX%s on %d\n",
865 ep->tx_channel ? " DMA" : "",
866 epnum);
867 if (!ep->tx_channel)
868 musb_h_tx_start(musb, epnum);
869 else
870 cppi_hostdma_start(musb, epnum);
871 }
872 } /* end of for loop */
873 }
874#endif
875
876 schedule_work(&musb->irq_work);
877
878 return handled;
879}
880
881/*-------------------------------------------------------------------------*/
882
883/*
884* Program the HDRC to start (enable interrupts, dma, etc.).
885*/
886void musb_start(struct musb *musb)
887{
888 void __iomem *regs = musb->mregs;
889 u8 devctl = musb_readb(regs, MUSB_DEVCTL);
890
891 dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
892
893 /* Set INT enable registers, enable interrupts */
894 musb_writew(regs, MUSB_INTRTXE, musb->epmask);
895 musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
896 musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
897
898 musb_writeb(regs, MUSB_TESTMODE, 0);
899
900 /* put into basic highspeed mode and start session */
901 musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
902 | MUSB_POWER_HSENAB
903 /* ENSUSPEND wedges tusb */
904 /* | MUSB_POWER_ENSUSPEND */
905 );
906
907 musb->is_active = 0;
908 devctl = musb_readb(regs, MUSB_DEVCTL);
909 devctl &= ~MUSB_DEVCTL_SESSION;
910
911 if (is_otg_enabled(musb)) {
912 /* session started after:
913 * (a) ID-grounded irq, host mode;
914 * (b) vbus present/connect IRQ, peripheral mode;
915 * (c) peripheral initiates, using SRP
916 */
917 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
918 musb->is_active = 1;
919 else
920 devctl |= MUSB_DEVCTL_SESSION;
921
922 } else if (is_host_enabled(musb)) {
923 /* assume ID pin is hard-wired to ground */
924 devctl |= MUSB_DEVCTL_SESSION;
925
926 } else /* peripheral is enabled */ {
927 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
928 musb->is_active = 1;
929 }
930 musb_platform_enable(musb);
931 musb_writeb(regs, MUSB_DEVCTL, devctl);
932}
933
934
935static void musb_generic_disable(struct musb *musb)
936{
937 void __iomem *mbase = musb->mregs;
938 u16 temp;
939
940 /* disable interrupts */
941 musb_writeb(mbase, MUSB_INTRUSBE, 0);
942 musb_writew(mbase, MUSB_INTRTXE, 0);
943 musb_writew(mbase, MUSB_INTRRXE, 0);
944
945 /* off */
946 musb_writeb(mbase, MUSB_DEVCTL, 0);
947
948 /* flush pending interrupts */
949 temp = musb_readb(mbase, MUSB_INTRUSB);
950 temp = musb_readw(mbase, MUSB_INTRTX);
951 temp = musb_readw(mbase, MUSB_INTRRX);
952
953}
954
955/*
956 * Make the HDRC stop (disable interrupts, etc.);
957 * reversible by musb_start
958 * called on gadget driver unregister
959 * with controller locked, irqs blocked
960 * acts as a NOP unless some role activated the hardware
961 */
962void musb_stop(struct musb *musb)
963{
964 /* stop IRQs, timers, ... */
965 musb_platform_disable(musb);
966 musb_generic_disable(musb);
967 dev_dbg(musb->controller, "HDRC disabled\n");
968
969 /* FIXME
970 * - mark host and/or peripheral drivers unusable/inactive
971 * - disable DMA (and enable it in HdrcStart)
972 * - make sure we can musb_start() after musb_stop(); with
973 * OTG mode, gadget driver module rmmod/modprobe cycles that
974 * - ...
975 */
976 musb_platform_try_idle(musb, 0);
977}
978
979static void musb_shutdown(struct platform_device *pdev)
980{
981 struct musb *musb = dev_to_musb(&pdev->dev);
982 unsigned long flags;
983
984 pm_runtime_get_sync(musb->controller);
985 spin_lock_irqsave(&musb->lock, flags);
986 musb_platform_disable(musb);
987 musb_generic_disable(musb);
988 spin_unlock_irqrestore(&musb->lock, flags);
989
990 if (!is_otg_enabled(musb) && is_host_enabled(musb))
991 usb_remove_hcd(musb_to_hcd(musb));
992 musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
993 musb_platform_exit(musb);
994
995 pm_runtime_put(musb->controller);
996 /* FIXME power down */
997}
998
999
1000/*-------------------------------------------------------------------------*/
1001
1002/*
1003 * The silicon either has hard-wired endpoint configurations, or else
1004 * "dynamic fifo" sizing. The driver has support for both, though at this
1005 * writing only the dynamic sizing is very well tested. Since we switched
1006 * away from compile-time hardware parameters, we can no longer rely on
1007 * dead code elimination to leave only the relevant one in the object file.
1008 *
1009 * We don't currently use dynamic fifo setup capability to do anything
1010 * more than selecting one of a bunch of predefined configurations.
1011 */
1012#if defined(CONFIG_USB_MUSB_TUSB6010) \
1013 || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) \
1014 || defined(CONFIG_USB_MUSB_OMAP2PLUS) \
1015 || defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE) \
1016 || defined(CONFIG_USB_MUSB_AM35X) \
1017 || defined(CONFIG_USB_MUSB_AM35X_MODULE)
1018static ushort __initdata fifo_mode = 4;
1019#elif defined(CONFIG_USB_MUSB_UX500) \
1020 || defined(CONFIG_USB_MUSB_UX500_MODULE)
1021static ushort __initdata fifo_mode = 5;
1022#else
1023static ushort __initdata fifo_mode = 2;
1024#endif
1025
1026/* "modprobe ... fifo_mode=1" etc */
1027module_param(fifo_mode, ushort, 0);
1028MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
1029
1030/*
1031 * tables defining fifo_mode values. define more if you like.
1032 * for host side, make sure both halves of ep1 are set up.
1033 */
1034
1035/* mode 0 - fits in 2KB */
1036static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
1037{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1038{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1039{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
1040{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1041{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1042};
1043
1044/* mode 1 - fits in 4KB */
1045static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
1046{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1047{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1048{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1049{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1050{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1051};
1052
1053/* mode 2 - fits in 4KB */
1054static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
1055{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1056{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1057{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1058{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1059{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1060{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1061};
1062
1063/* mode 3 - fits in 4KB */
1064static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
1065{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1066{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, .mode = BUF_DOUBLE, },
1067{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1068{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1069{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
1070{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
1071};
1072
1073/* mode 4 - fits in 16KB */
1074static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
1075{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1076{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1077{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1078{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1079{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
1080{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
1081{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
1082{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
1083{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
1084{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
1085{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 512, },
1086{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 512, },
1087{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, },
1088{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 512, },
1089{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 512, },
1090{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
1091{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
1092{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
1093{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, },
1094{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
1095{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
1096{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, },
1097{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
1098{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, },
1099{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
1100{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1101{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1102};
1103
1104/* mode 5 - fits in 8KB */
1105static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
1106{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
1107{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
1108{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
1109{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
1110{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
1111{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
1112{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
1113{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
1114{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
1115{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
1116{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, },
1117{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, },
1118{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, },
1119{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, },
1120{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, },
1121{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, },
1122{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, },
1123{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, },
1124{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, },
1125{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, },
1126{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, },
1127{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, },
1128{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, },
1129{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, },
1130{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, },
1131{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
1132{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
1133};
1134
1135/*
1136 * configure a fifo; for non-shared endpoints, this may be called
1137 * once for a tx fifo and once for an rx fifo.
1138 *
1139 * returns negative errno or offset for next fifo.
1140 */
1141static int __init
1142fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
1143 const struct musb_fifo_cfg *cfg, u16 offset)
1144{
1145 void __iomem *mbase = musb->mregs;
1146 int size = 0;
1147 u16 maxpacket = cfg->maxpacket;
1148 u16 c_off = offset >> 3;
1149 u8 c_size;
1150
1151 /* expect hw_ep has already been zero-initialized */
1152
1153 size = ffs(max(maxpacket, (u16) 8)) - 1;
1154 maxpacket = 1 << size;
1155
1156 c_size = size - 3;
1157 if (cfg->mode == BUF_DOUBLE) {
1158 if ((offset + (maxpacket << 1)) >
1159 (1 << (musb->config->ram_bits + 2)))
1160 return -EMSGSIZE;
1161 c_size |= MUSB_FIFOSZ_DPB;
1162 } else {
1163 if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
1164 return -EMSGSIZE;
1165 }
1166
1167 /* configure the FIFO */
1168 musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
1169
1170 /* EP0 reserved endpoint for control, bidirectional;
1171 * EP1 reserved for bulk, two unidirection halves.
1172 */
1173 if (hw_ep->epnum == 1)
1174 musb->bulk_ep = hw_ep;
1175 /* REVISIT error check: be sure ep0 can both rx and tx ... */
1176 switch (cfg->style) {
1177 case FIFO_TX:
1178 musb_write_txfifosz(mbase, c_size);
1179 musb_write_txfifoadd(mbase, c_off);
1180 hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1181 hw_ep->max_packet_sz_tx = maxpacket;
1182 break;
1183 case FIFO_RX:
1184 musb_write_rxfifosz(mbase, c_size);
1185 musb_write_rxfifoadd(mbase, c_off);
1186 hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1187 hw_ep->max_packet_sz_rx = maxpacket;
1188 break;
1189 case FIFO_RXTX:
1190 musb_write_txfifosz(mbase, c_size);
1191 musb_write_txfifoadd(mbase, c_off);
1192 hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
1193 hw_ep->max_packet_sz_rx = maxpacket;
1194
1195 musb_write_rxfifosz(mbase, c_size);
1196 musb_write_rxfifoadd(mbase, c_off);
1197 hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
1198 hw_ep->max_packet_sz_tx = maxpacket;
1199
1200 hw_ep->is_shared_fifo = true;
1201 break;
1202 }
1203
1204 /* NOTE rx and tx endpoint irqs aren't managed separately,
1205 * which happens to be ok
1206 */
1207 musb->epmask |= (1 << hw_ep->epnum);
1208
1209 return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
1210}
1211
1212static struct musb_fifo_cfg __initdata ep0_cfg = {
1213 .style = FIFO_RXTX, .maxpacket = 64,
1214};
1215
1216static int __init ep_config_from_table(struct musb *musb)
1217{
1218 const struct musb_fifo_cfg *cfg;
1219 unsigned i, n;
1220 int offset;
1221 struct musb_hw_ep *hw_ep = musb->endpoints;
1222
1223 if (musb->config->fifo_cfg) {
1224 cfg = musb->config->fifo_cfg;
1225 n = musb->config->fifo_cfg_size;
1226 goto done;
1227 }
1228
1229 switch (fifo_mode) {
1230 default:
1231 fifo_mode = 0;
1232 /* FALLTHROUGH */
1233 case 0:
1234 cfg = mode_0_cfg;
1235 n = ARRAY_SIZE(mode_0_cfg);
1236 break;
1237 case 1:
1238 cfg = mode_1_cfg;
1239 n = ARRAY_SIZE(mode_1_cfg);
1240 break;
1241 case 2:
1242 cfg = mode_2_cfg;
1243 n = ARRAY_SIZE(mode_2_cfg);
1244 break;
1245 case 3:
1246 cfg = mode_3_cfg;
1247 n = ARRAY_SIZE(mode_3_cfg);
1248 break;
1249 case 4:
1250 cfg = mode_4_cfg;
1251 n = ARRAY_SIZE(mode_4_cfg);
1252 break;
1253 case 5:
1254 cfg = mode_5_cfg;
1255 n = ARRAY_SIZE(mode_5_cfg);
1256 break;
1257 }
1258
1259 printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
1260 musb_driver_name, fifo_mode);
1261
1262
1263done:
1264 offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
1265 /* assert(offset > 0) */
1266
1267 /* NOTE: for RTL versions >= 1.400 EPINFO and RAMINFO would
1268 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
1269 */
1270
1271 for (i = 0; i < n; i++) {
1272 u8 epn = cfg->hw_ep_num;
1273
1274 if (epn >= musb->config->num_eps) {
1275 pr_debug("%s: invalid ep %d\n",
1276 musb_driver_name, epn);
1277 return -EINVAL;
1278 }
1279 offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
1280 if (offset < 0) {
1281 pr_debug("%s: mem overrun, ep %d\n",
1282 musb_driver_name, epn);
1283 return -EINVAL;
1284 }
1285 epn++;
1286 musb->nr_endpoints = max(epn, musb->nr_endpoints);
1287 }
1288
1289 printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
1290 musb_driver_name,
1291 n + 1, musb->config->num_eps * 2 - 1,
1292 offset, (1 << (musb->config->ram_bits + 2)));
1293
1294 if (!musb->bulk_ep) {
1295 pr_debug("%s: missing bulk\n", musb_driver_name);
1296 return -EINVAL;
1297 }
1298
1299 return 0;
1300}
1301
1302
1303/*
1304 * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
1305 * @param musb the controller
1306 */
1307static int __init ep_config_from_hw(struct musb *musb)
1308{
1309 u8 epnum = 0;
1310 struct musb_hw_ep *hw_ep;
1311 void *mbase = musb->mregs;
1312 int ret = 0;
1313
1314 dev_dbg(musb->controller, "<== static silicon ep config\n");
1315
1316 /* FIXME pick up ep0 maxpacket size */
1317
1318 for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
1319 musb_ep_select(mbase, epnum);
1320 hw_ep = musb->endpoints + epnum;
1321
1322 ret = musb_read_fifosize(musb, hw_ep, epnum);
1323 if (ret < 0)
1324 break;
1325
1326 /* FIXME set up hw_ep->{rx,tx}_double_buffered */
1327
1328 /* pick an RX/TX endpoint for bulk */
1329 if (hw_ep->max_packet_sz_tx < 512
1330 || hw_ep->max_packet_sz_rx < 512)
1331 continue;
1332
1333 /* REVISIT: this algorithm is lazy, we should at least
1334 * try to pick a double buffered endpoint.
1335 */
1336 if (musb->bulk_ep)
1337 continue;
1338 musb->bulk_ep = hw_ep;
1339 }
1340
1341 if (!musb->bulk_ep) {
1342 pr_debug("%s: missing bulk\n", musb_driver_name);
1343 return -EINVAL;
1344 }
1345
1346 return 0;
1347}
1348
1349enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
1350
1351/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
1352 * configure endpoints, or take their config from silicon
1353 */
1354static int __init musb_core_init(u16 musb_type, struct musb *musb)
1355{
1356 u8 reg;
1357 char *type;
1358 char aInfo[90], aRevision[32], aDate[12];
1359 void __iomem *mbase = musb->mregs;
1360 int status = 0;
1361 int i;
1362
1363 /* log core options (read using indexed model) */
1364 reg = musb_read_configdata(mbase);
1365
1366 strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
1367 if (reg & MUSB_CONFIGDATA_DYNFIFO) {
1368 strcat(aInfo, ", dyn FIFOs");
1369 musb->dyn_fifo = true;
1370 }
1371 if (reg & MUSB_CONFIGDATA_MPRXE) {
1372 strcat(aInfo, ", bulk combine");
1373 musb->bulk_combine = true;
1374 }
1375 if (reg & MUSB_CONFIGDATA_MPTXE) {
1376 strcat(aInfo, ", bulk split");
1377 musb->bulk_split = true;
1378 }
1379 if (reg & MUSB_CONFIGDATA_HBRXE) {
1380 strcat(aInfo, ", HB-ISO Rx");
1381 musb->hb_iso_rx = true;
1382 }
1383 if (reg & MUSB_CONFIGDATA_HBTXE) {
1384 strcat(aInfo, ", HB-ISO Tx");
1385 musb->hb_iso_tx = true;
1386 }
1387 if (reg & MUSB_CONFIGDATA_SOFTCONE)
1388 strcat(aInfo, ", SoftConn");
1389
1390 printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
1391 musb_driver_name, reg, aInfo);
1392
1393 aDate[0] = 0;
1394 if (MUSB_CONTROLLER_MHDRC == musb_type) {
1395 musb->is_multipoint = 1;
1396 type = "M";
1397 } else {
1398 musb->is_multipoint = 0;
1399 type = "";
1400#ifndef CONFIG_USB_OTG_BLACKLIST_HUB
1401 printk(KERN_ERR
1402 "%s: kernel must blacklist external hubs\n",
1403 musb_driver_name);
1404#endif
1405 }
1406
1407 /* log release info */
1408 musb->hwvers = musb_read_hwvers(mbase);
1409 snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers),
1410 MUSB_HWVERS_MINOR(musb->hwvers),
1411 (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
1412 printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
1413 musb_driver_name, type, aRevision, aDate);
1414
1415 /* configure ep0 */
1416 musb_configure_ep0(musb);
1417
1418 /* discover endpoint configuration */
1419 musb->nr_endpoints = 1;
1420 musb->epmask = 1;
1421
1422 if (musb->dyn_fifo)
1423 status = ep_config_from_table(musb);
1424 else
1425 status = ep_config_from_hw(musb);
1426
1427 if (status < 0)
1428 return status;
1429
1430 /* finish init, and print endpoint config */
1431 for (i = 0; i < musb->nr_endpoints; i++) {
1432 struct musb_hw_ep *hw_ep = musb->endpoints + i;
1433
1434 hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
1435#ifdef CONFIG_USB_MUSB_TUSB6010
1436 hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
1437 hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
1438 hw_ep->fifo_sync_va =
1439 musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
1440
1441 if (i == 0)
1442 hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
1443 else
1444 hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
1445#endif
1446
1447 hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
1448 hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
1449 hw_ep->rx_reinit = 1;
1450 hw_ep->tx_reinit = 1;
1451
1452 if (hw_ep->max_packet_sz_tx) {
1453 dev_dbg(musb->controller,
1454 "%s: hw_ep %d%s, %smax %d\n",
1455 musb_driver_name, i,
1456 hw_ep->is_shared_fifo ? "shared" : "tx",
1457 hw_ep->tx_double_buffered
1458 ? "doublebuffer, " : "",
1459 hw_ep->max_packet_sz_tx);
1460 }
1461 if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
1462 dev_dbg(musb->controller,
1463 "%s: hw_ep %d%s, %smax %d\n",
1464 musb_driver_name, i,
1465 "rx",
1466 hw_ep->rx_double_buffered
1467 ? "doublebuffer, " : "",
1468 hw_ep->max_packet_sz_rx);
1469 }
1470 if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
1471 dev_dbg(musb->controller, "hw_ep %d not configured\n", i);
1472 }
1473
1474 return 0;
1475}
1476
1477/*-------------------------------------------------------------------------*/
1478
1479#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
1480 defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
1481 defined(CONFIG_ARCH_U5500)
1482
1483static irqreturn_t generic_interrupt(int irq, void *__hci)
1484{
1485 unsigned long flags;
1486 irqreturn_t retval = IRQ_NONE;
1487 struct musb *musb = __hci;
1488
1489 spin_lock_irqsave(&musb->lock, flags);
1490
1491 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
1492 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
1493 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
1494
1495 if (musb->int_usb || musb->int_tx || musb->int_rx)
1496 retval = musb_interrupt(musb);
1497
1498 spin_unlock_irqrestore(&musb->lock, flags);
1499
1500 return retval;
1501}
1502
1503#else
1504#define generic_interrupt NULL
1505#endif
1506
1507/*
1508 * handle all the irqs defined by the HDRC core. for now we expect: other
1509 * irq sources (phy, dma, etc) will be handled first, musb->int_* values
1510 * will be assigned, and the irq will already have been acked.
1511 *
1512 * called in irq context with spinlock held, irqs blocked
1513 */
1514irqreturn_t musb_interrupt(struct musb *musb)
1515{
1516 irqreturn_t retval = IRQ_NONE;
1517 u8 devctl, power;
1518 int ep_num;
1519 u32 reg;
1520
1521 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1522 power = musb_readb(musb->mregs, MUSB_POWER);
1523
1524 dev_dbg(musb->controller, "** IRQ %s usb%04x tx%04x rx%04x\n",
1525 (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
1526 musb->int_usb, musb->int_tx, musb->int_rx);
1527
1528 /* the core can interrupt us for multiple reasons; docs have
1529 * a generic interrupt flowchart to follow
1530 */
1531 if (musb->int_usb)
1532 retval |= musb_stage0_irq(musb, musb->int_usb,
1533 devctl, power);
1534
1535 /* "stage 1" is handling endpoint irqs */
1536
1537 /* handle endpoint 0 first */
1538 if (musb->int_tx & 1) {
1539 if (devctl & MUSB_DEVCTL_HM)
1540 retval |= musb_h_ep0_irq(musb);
1541 else
1542 retval |= musb_g_ep0_irq(musb);
1543 }
1544
1545 /* RX on endpoints 1-15 */
1546 reg = musb->int_rx >> 1;
1547 ep_num = 1;
1548 while (reg) {
1549 if (reg & 1) {
1550 /* musb_ep_select(musb->mregs, ep_num); */
1551 /* REVISIT just retval = ep->rx_irq(...) */
1552 retval = IRQ_HANDLED;
1553 if (devctl & MUSB_DEVCTL_HM) {
1554 if (is_host_capable())
1555 musb_host_rx(musb, ep_num);
1556 } else {
1557 if (is_peripheral_capable())
1558 musb_g_rx(musb, ep_num);
1559 }
1560 }
1561
1562 reg >>= 1;
1563 ep_num++;
1564 }
1565
1566 /* TX on endpoints 1-15 */
1567 reg = musb->int_tx >> 1;
1568 ep_num = 1;
1569 while (reg) {
1570 if (reg & 1) {
1571 /* musb_ep_select(musb->mregs, ep_num); */
1572 /* REVISIT just retval |= ep->tx_irq(...) */
1573 retval = IRQ_HANDLED;
1574 if (devctl & MUSB_DEVCTL_HM) {
1575 if (is_host_capable())
1576 musb_host_tx(musb, ep_num);
1577 } else {
1578 if (is_peripheral_capable())
1579 musb_g_tx(musb, ep_num);
1580 }
1581 }
1582 reg >>= 1;
1583 ep_num++;
1584 }
1585
1586 return retval;
1587}
1588EXPORT_SYMBOL_GPL(musb_interrupt);
1589
1590#ifndef CONFIG_MUSB_PIO_ONLY
1591static int __initdata use_dma = 1;
1592
1593/* "modprobe ... use_dma=0" etc */
1594module_param(use_dma, bool, 0);
1595MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
1596
1597void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
1598{
1599 u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
1600
1601 /* called with controller lock already held */
1602
1603 if (!epnum) {
1604#ifndef CONFIG_USB_TUSB_OMAP_DMA
1605 if (!is_cppi_enabled()) {
1606 /* endpoint 0 */
1607 if (devctl & MUSB_DEVCTL_HM)
1608 musb_h_ep0_irq(musb);
1609 else
1610 musb_g_ep0_irq(musb);
1611 }
1612#endif
1613 } else {
1614 /* endpoints 1..15 */
1615 if (transmit) {
1616 if (devctl & MUSB_DEVCTL_HM) {
1617 if (is_host_capable())
1618 musb_host_tx(musb, epnum);
1619 } else {
1620 if (is_peripheral_capable())
1621 musb_g_tx(musb, epnum);
1622 }
1623 } else {
1624 /* receive */
1625 if (devctl & MUSB_DEVCTL_HM) {
1626 if (is_host_capable())
1627 musb_host_rx(musb, epnum);
1628 } else {
1629 if (is_peripheral_capable())
1630 musb_g_rx(musb, epnum);
1631 }
1632 }
1633 }
1634}
1635
1636#else
1637#define use_dma 0
1638#endif
1639
1640/*-------------------------------------------------------------------------*/
1641
1642#ifdef CONFIG_SYSFS
1643
1644static ssize_t
1645musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
1646{
1647 struct musb *musb = dev_to_musb(dev);
1648 unsigned long flags;
1649 int ret = -EINVAL;
1650
1651 spin_lock_irqsave(&musb->lock, flags);
1652 ret = sprintf(buf, "%s\n", otg_state_string(musb->xceiv->state));
1653 spin_unlock_irqrestore(&musb->lock, flags);
1654
1655 return ret;
1656}
1657
1658static ssize_t
1659musb_mode_store(struct device *dev, struct device_attribute *attr,
1660 const char *buf, size_t n)
1661{
1662 struct musb *musb = dev_to_musb(dev);
1663 unsigned long flags;
1664 int status;
1665
1666 spin_lock_irqsave(&musb->lock, flags);
1667 if (sysfs_streq(buf, "host"))
1668 status = musb_platform_set_mode(musb, MUSB_HOST);
1669 else if (sysfs_streq(buf, "peripheral"))
1670 status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
1671 else if (sysfs_streq(buf, "otg"))
1672 status = musb_platform_set_mode(musb, MUSB_OTG);
1673 else
1674 status = -EINVAL;
1675 spin_unlock_irqrestore(&musb->lock, flags);
1676
1677 return (status == 0) ? n : status;
1678}
1679static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
1680
1681static ssize_t
1682musb_vbus_store(struct device *dev, struct device_attribute *attr,
1683 const char *buf, size_t n)
1684{
1685 struct musb *musb = dev_to_musb(dev);
1686 unsigned long flags;
1687 unsigned long val;
1688
1689 if (sscanf(buf, "%lu", &val) < 1) {
1690 dev_err(dev, "Invalid VBUS timeout ms value\n");
1691 return -EINVAL;
1692 }
1693
1694 spin_lock_irqsave(&musb->lock, flags);
1695 /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
1696 musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
1697 if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
1698 musb->is_active = 0;
1699 musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
1700 spin_unlock_irqrestore(&musb->lock, flags);
1701
1702 return n;
1703}
1704
1705static ssize_t
1706musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
1707{
1708 struct musb *musb = dev_to_musb(dev);
1709 unsigned long flags;
1710 unsigned long val;
1711 int vbus;
1712
1713 spin_lock_irqsave(&musb->lock, flags);
1714 val = musb->a_wait_bcon;
1715 /* FIXME get_vbus_status() is normally #defined as false...
1716 * and is effectively TUSB-specific.
1717 */
1718 vbus = musb_platform_get_vbus_status(musb);
1719 spin_unlock_irqrestore(&musb->lock, flags);
1720
1721 return sprintf(buf, "Vbus %s, timeout %lu msec\n",
1722 vbus ? "on" : "off", val);
1723}
1724static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
1725
1726/* Gadget drivers can't know that a host is connected so they might want
1727 * to start SRP, but users can. This allows userspace to trigger SRP.
1728 */
1729static ssize_t
1730musb_srp_store(struct device *dev, struct device_attribute *attr,
1731 const char *buf, size_t n)
1732{
1733 struct musb *musb = dev_to_musb(dev);
1734 unsigned short srp;
1735
1736 if (sscanf(buf, "%hu", &srp) != 1
1737 || (srp != 1)) {
1738 dev_err(dev, "SRP: Value must be 1\n");
1739 return -EINVAL;
1740 }
1741
1742 if (srp == 1)
1743 musb_g_wakeup(musb);
1744
1745 return n;
1746}
1747static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
1748
1749static struct attribute *musb_attributes[] = {
1750 &dev_attr_mode.attr,
1751 &dev_attr_vbus.attr,
1752 &dev_attr_srp.attr,
1753 NULL
1754};
1755
1756static const struct attribute_group musb_attr_group = {
1757 .attrs = musb_attributes,
1758};
1759
1760#endif /* sysfs */
1761
1762/* Only used to provide driver mode change events */
1763static void musb_irq_work(struct work_struct *data)
1764{
1765 struct musb *musb = container_of(data, struct musb, irq_work);
1766 static int old_state;
1767
1768 if (musb->xceiv->state != old_state) {
1769 old_state = musb->xceiv->state;
1770 sysfs_notify(&musb->controller->kobj, NULL, "mode");
1771 }
1772}
1773
1774/* --------------------------------------------------------------------------
1775 * Init support
1776 */
1777
1778static struct musb *__init
1779allocate_instance(struct device *dev,
1780 struct musb_hdrc_config *config, void __iomem *mbase)
1781{
1782 struct musb *musb;
1783 struct musb_hw_ep *ep;
1784 int epnum;
1785 struct usb_hcd *hcd;
1786
1787 hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
1788 if (!hcd)
1789 return NULL;
1790 /* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
1791
1792 musb = hcd_to_musb(hcd);
1793 INIT_LIST_HEAD(&musb->control);
1794 INIT_LIST_HEAD(&musb->in_bulk);
1795 INIT_LIST_HEAD(&musb->out_bulk);
1796
1797 hcd->uses_new_polling = 1;
1798 hcd->has_tt = 1;
1799
1800 musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
1801 musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
1802 dev_set_drvdata(dev, musb);
1803 musb->mregs = mbase;
1804 musb->ctrl_base = mbase;
1805 musb->nIrq = -ENODEV;
1806 musb->config = config;
1807 BUG_ON(musb->config->num_eps > MUSB_C_NUM_EPS);
1808 for (epnum = 0, ep = musb->endpoints;
1809 epnum < musb->config->num_eps;
1810 epnum++, ep++) {
1811 ep->musb = musb;
1812 ep->epnum = epnum;
1813 }
1814
1815 musb->controller = dev;
1816
1817 return musb;
1818}
1819
1820static void musb_free(struct musb *musb)
1821{
1822 /* this has multiple entry modes. it handles fault cleanup after
1823 * probe(), where things may be partially set up, as well as rmmod
1824 * cleanup after everything's been de-activated.
1825 */
1826
1827#ifdef CONFIG_SYSFS
1828 sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
1829#endif
1830
1831 musb_gadget_cleanup(musb);
1832
1833 if (musb->nIrq >= 0) {
1834 if (musb->irq_wake)
1835 disable_irq_wake(musb->nIrq);
1836 free_irq(musb->nIrq, musb);
1837 }
1838 if (is_dma_capable() && musb->dma_controller) {
1839 struct dma_controller *c = musb->dma_controller;
1840
1841 (void) c->stop(c);
1842 dma_controller_destroy(c);
1843 }
1844
1845 kfree(musb);
1846}
1847
1848/*
1849 * Perform generic per-controller initialization.
1850 *
1851 * @pDevice: the controller (already clocked, etc)
1852 * @nIrq: irq
1853 * @mregs: virtual address of controller registers,
1854 * not yet corrected for platform-specific offsets
1855 */
1856static int __init
1857musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
1858{
1859 int status;
1860 struct musb *musb;
1861 struct musb_hdrc_platform_data *plat = dev->platform_data;
1862
1863 /* The driver might handle more features than the board; OK.
1864 * Fail when the board needs a feature that's not enabled.
1865 */
1866 if (!plat) {
1867 dev_dbg(dev, "no platform_data?\n");
1868 status = -ENODEV;
1869 goto fail0;
1870 }
1871
1872 /* allocate */
1873 musb = allocate_instance(dev, plat->config, ctrl);
1874 if (!musb) {
1875 status = -ENOMEM;
1876 goto fail0;
1877 }
1878
1879 pm_runtime_use_autosuspend(musb->controller);
1880 pm_runtime_set_autosuspend_delay(musb->controller, 200);
1881 pm_runtime_enable(musb->controller);
1882
1883 spin_lock_init(&musb->lock);
1884 musb->board_mode = plat->mode;
1885 musb->board_set_power = plat->set_power;
1886 musb->min_power = plat->min_power;
1887 musb->ops = plat->platform_ops;
1888
1889 /* The musb_platform_init() call:
1890 * - adjusts musb->mregs and musb->isr if needed,
1891 * - may initialize an integrated tranceiver
1892 * - initializes musb->xceiv, usually by otg_get_transceiver()
1893 * - stops powering VBUS
1894 *
1895 * There are various transceiver configurations. Blackfin,
1896 * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
1897 * external/discrete ones in various flavors (twl4030 family,
1898 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
1899 */
1900 musb->isr = generic_interrupt;
1901 status = musb_platform_init(musb);
1902 if (status < 0)
1903 goto fail1;
1904
1905 if (!musb->isr) {
1906 status = -ENODEV;
1907 goto fail3;
1908 }
1909
1910 if (!musb->xceiv->io_ops) {
1911 musb->xceiv->io_priv = musb->mregs;
1912 musb->xceiv->io_ops = &musb_ulpi_access;
1913 }
1914
1915#ifndef CONFIG_MUSB_PIO_ONLY
1916 if (use_dma && dev->dma_mask) {
1917 struct dma_controller *c;
1918
1919 c = dma_controller_create(musb, musb->mregs);
1920 musb->dma_controller = c;
1921 if (c)
1922 (void) c->start(c);
1923 }
1924#endif
1925 /* ideally this would be abstracted in platform setup */
1926 if (!is_dma_capable() || !musb->dma_controller)
1927 dev->dma_mask = NULL;
1928
1929 /* be sure interrupts are disabled before connecting ISR */
1930 musb_platform_disable(musb);
1931 musb_generic_disable(musb);
1932
1933 /* setup musb parts of the core (especially endpoints) */
1934 status = musb_core_init(plat->config->multipoint
1935 ? MUSB_CONTROLLER_MHDRC
1936 : MUSB_CONTROLLER_HDRC, musb);
1937 if (status < 0)
1938 goto fail3;
1939
1940 setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
1941
1942 /* Init IRQ workqueue before request_irq */
1943 INIT_WORK(&musb->irq_work, musb_irq_work);
1944
1945 /* attach to the IRQ */
1946 if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
1947 dev_err(dev, "request_irq %d failed!\n", nIrq);
1948 status = -ENODEV;
1949 goto fail3;
1950 }
1951 musb->nIrq = nIrq;
1952/* FIXME this handles wakeup irqs wrong */
1953 if (enable_irq_wake(nIrq) == 0) {
1954 musb->irq_wake = 1;
1955 device_init_wakeup(dev, 1);
1956 } else {
1957 musb->irq_wake = 0;
1958 }
1959
1960 /* host side needs more setup */
1961 if (is_host_enabled(musb)) {
1962 struct usb_hcd *hcd = musb_to_hcd(musb);
1963
1964 otg_set_host(musb->xceiv, &hcd->self);
1965
1966 if (is_otg_enabled(musb))
1967 hcd->self.otg_port = 1;
1968 musb->xceiv->host = &hcd->self;
1969 hcd->power_budget = 2 * (plat->power ? : 250);
1970
1971 /* program PHY to use external vBus if required */
1972 if (plat->extvbus) {
1973 u8 busctl = musb_read_ulpi_buscontrol(musb->mregs);
1974 busctl |= MUSB_ULPI_USE_EXTVBUS;
1975 musb_write_ulpi_buscontrol(musb->mregs, busctl);
1976 }
1977 }
1978
1979 /* For the host-only role, we can activate right away.
1980 * (We expect the ID pin to be forcibly grounded!!)
1981 * Otherwise, wait till the gadget driver hooks up.
1982 */
1983 if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
1984 struct usb_hcd *hcd = musb_to_hcd(musb);
1985
1986 MUSB_HST_MODE(musb);
1987 musb->xceiv->default_a = 1;
1988 musb->xceiv->state = OTG_STATE_A_IDLE;
1989
1990 status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
1991
1992 hcd->self.uses_pio_for_control = 1;
1993 dev_dbg(musb->controller, "%s mode, status %d, devctl %02x %c\n",
1994 "HOST", status,
1995 musb_readb(musb->mregs, MUSB_DEVCTL),
1996 (musb_readb(musb->mregs, MUSB_DEVCTL)
1997 & MUSB_DEVCTL_BDEVICE
1998 ? 'B' : 'A'));
1999
2000 } else /* peripheral is enabled */ {
2001 MUSB_DEV_MODE(musb);
2002 musb->xceiv->default_a = 0;
2003 musb->xceiv->state = OTG_STATE_B_IDLE;
2004
2005 status = musb_gadget_setup(musb);
2006
2007 dev_dbg(musb->controller, "%s mode, status %d, dev%02x\n",
2008 is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
2009 status,
2010 musb_readb(musb->mregs, MUSB_DEVCTL));
2011
2012 }
2013 if (status < 0)
2014 goto fail3;
2015
2016 pm_runtime_put(musb->controller);
2017
2018 status = musb_init_debugfs(musb);
2019 if (status < 0)
2020 goto fail4;
2021
2022#ifdef CONFIG_SYSFS
2023 status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
2024 if (status)
2025 goto fail5;
2026#endif
2027
2028 dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
2029 ({char *s;
2030 switch (musb->board_mode) {
2031 case MUSB_HOST: s = "Host"; break;
2032 case MUSB_PERIPHERAL: s = "Peripheral"; break;
2033 default: s = "OTG"; break;
2034 }; s; }),
2035 ctrl,
2036 (is_dma_capable() && musb->dma_controller)
2037 ? "DMA" : "PIO",
2038 musb->nIrq);
2039
2040 return 0;
2041
2042fail5:
2043 musb_exit_debugfs(musb);
2044
2045fail4:
2046 if (!is_otg_enabled(musb) && is_host_enabled(musb))
2047 usb_remove_hcd(musb_to_hcd(musb));
2048 else
2049 musb_gadget_cleanup(musb);
2050
2051fail3:
2052 if (musb->irq_wake)
2053 device_init_wakeup(dev, 0);
2054 musb_platform_exit(musb);
2055
2056fail1:
2057 dev_err(musb->controller,
2058 "musb_init_controller failed with status %d\n", status);
2059
2060 musb_free(musb);
2061
2062fail0:
2063
2064 return status;
2065
2066}
2067
2068/*-------------------------------------------------------------------------*/
2069
2070/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
2071 * bridge to a platform device; this driver then suffices.
2072 */
2073
2074#ifndef CONFIG_MUSB_PIO_ONLY
2075static u64 *orig_dma_mask;
2076#endif
2077
2078static int __init musb_probe(struct platform_device *pdev)
2079{
2080 struct device *dev = &pdev->dev;
2081 int irq = platform_get_irq_byname(pdev, "mc");
2082 int status;
2083 struct resource *iomem;
2084 void __iomem *base;
2085
2086 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2087 if (!iomem || irq <= 0)
2088 return -ENODEV;
2089
2090 base = ioremap(iomem->start, resource_size(iomem));
2091 if (!base) {
2092 dev_err(dev, "ioremap failed\n");
2093 return -ENOMEM;
2094 }
2095
2096#ifndef CONFIG_MUSB_PIO_ONLY
2097 /* clobbered by use_dma=n */
2098 orig_dma_mask = dev->dma_mask;
2099#endif
2100 status = musb_init_controller(dev, irq, base);
2101 if (status < 0)
2102 iounmap(base);
2103
2104 return status;
2105}
2106
2107static int __exit musb_remove(struct platform_device *pdev)
2108{
2109 struct musb *musb = dev_to_musb(&pdev->dev);
2110 void __iomem *ctrl_base = musb->ctrl_base;
2111
2112 /* this gets called on rmmod.
2113 * - Host mode: host may still be active
2114 * - Peripheral mode: peripheral is deactivated (or never-activated)
2115 * - OTG mode: both roles are deactivated (or never-activated)
2116 */
2117 pm_runtime_get_sync(musb->controller);
2118 musb_exit_debugfs(musb);
2119 musb_shutdown(pdev);
2120
2121 pm_runtime_put(musb->controller);
2122 musb_free(musb);
2123 iounmap(ctrl_base);
2124 device_init_wakeup(&pdev->dev, 0);
2125#ifndef CONFIG_MUSB_PIO_ONLY
2126 pdev->dev.dma_mask = orig_dma_mask;
2127#endif
2128 return 0;
2129}
2130
2131#ifdef CONFIG_PM
2132
2133static void musb_save_context(struct musb *musb)
2134{
2135 int i;
2136 void __iomem *musb_base = musb->mregs;
2137 void __iomem *epio;
2138
2139 if (is_host_enabled(musb)) {
2140 musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
2141 musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
2142 musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
2143 }
2144 musb->context.power = musb_readb(musb_base, MUSB_POWER);
2145 musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
2146 musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
2147 musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
2148 musb->context.index = musb_readb(musb_base, MUSB_INDEX);
2149 musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
2150
2151 for (i = 0; i < musb->config->num_eps; ++i) {
2152 struct musb_hw_ep *hw_ep;
2153
2154 hw_ep = &musb->endpoints[i];
2155 if (!hw_ep)
2156 continue;
2157
2158 epio = hw_ep->regs;
2159 if (!epio)
2160 continue;
2161
2162 musb->context.index_regs[i].txmaxp =
2163 musb_readw(epio, MUSB_TXMAXP);
2164 musb->context.index_regs[i].txcsr =
2165 musb_readw(epio, MUSB_TXCSR);
2166 musb->context.index_regs[i].rxmaxp =
2167 musb_readw(epio, MUSB_RXMAXP);
2168 musb->context.index_regs[i].rxcsr =
2169 musb_readw(epio, MUSB_RXCSR);
2170
2171 if (musb->dyn_fifo) {
2172 musb->context.index_regs[i].txfifoadd =
2173 musb_read_txfifoadd(musb_base);
2174 musb->context.index_regs[i].rxfifoadd =
2175 musb_read_rxfifoadd(musb_base);
2176 musb->context.index_regs[i].txfifosz =
2177 musb_read_txfifosz(musb_base);
2178 musb->context.index_regs[i].rxfifosz =
2179 musb_read_rxfifosz(musb_base);
2180 }
2181 if (is_host_enabled(musb)) {
2182 musb->context.index_regs[i].txtype =
2183 musb_readb(epio, MUSB_TXTYPE);
2184 musb->context.index_regs[i].txinterval =
2185 musb_readb(epio, MUSB_TXINTERVAL);
2186 musb->context.index_regs[i].rxtype =
2187 musb_readb(epio, MUSB_RXTYPE);
2188 musb->context.index_regs[i].rxinterval =
2189 musb_readb(epio, MUSB_RXINTERVAL);
2190
2191 musb->context.index_regs[i].txfunaddr =
2192 musb_read_txfunaddr(musb_base, i);
2193 musb->context.index_regs[i].txhubaddr =
2194 musb_read_txhubaddr(musb_base, i);
2195 musb->context.index_regs[i].txhubport =
2196 musb_read_txhubport(musb_base, i);
2197
2198 musb->context.index_regs[i].rxfunaddr =
2199 musb_read_rxfunaddr(musb_base, i);
2200 musb->context.index_regs[i].rxhubaddr =
2201 musb_read_rxhubaddr(musb_base, i);
2202 musb->context.index_regs[i].rxhubport =
2203 musb_read_rxhubport(musb_base, i);
2204 }
2205 }
2206}
2207
2208static void musb_restore_context(struct musb *musb)
2209{
2210 int i;
2211 void __iomem *musb_base = musb->mregs;
2212 void __iomem *ep_target_regs;
2213 void __iomem *epio;
2214
2215 if (is_host_enabled(musb)) {
2216 musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
2217 musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
2218 musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
2219 }
2220 musb_writeb(musb_base, MUSB_POWER, musb->context.power);
2221 musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
2222 musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
2223 musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
2224 musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
2225
2226 for (i = 0; i < musb->config->num_eps; ++i) {
2227 struct musb_hw_ep *hw_ep;
2228
2229 hw_ep = &musb->endpoints[i];
2230 if (!hw_ep)
2231 continue;
2232
2233 epio = hw_ep->regs;
2234 if (!epio)
2235 continue;
2236
2237 musb_writew(epio, MUSB_TXMAXP,
2238 musb->context.index_regs[i].txmaxp);
2239 musb_writew(epio, MUSB_TXCSR,
2240 musb->context.index_regs[i].txcsr);
2241 musb_writew(epio, MUSB_RXMAXP,
2242 musb->context.index_regs[i].rxmaxp);
2243 musb_writew(epio, MUSB_RXCSR,
2244 musb->context.index_regs[i].rxcsr);
2245
2246 if (musb->dyn_fifo) {
2247 musb_write_txfifosz(musb_base,
2248 musb->context.index_regs[i].txfifosz);
2249 musb_write_rxfifosz(musb_base,
2250 musb->context.index_regs[i].rxfifosz);
2251 musb_write_txfifoadd(musb_base,
2252 musb->context.index_regs[i].txfifoadd);
2253 musb_write_rxfifoadd(musb_base,
2254 musb->context.index_regs[i].rxfifoadd);
2255 }
2256
2257 if (is_host_enabled(musb)) {
2258 musb_writeb(epio, MUSB_TXTYPE,
2259 musb->context.index_regs[i].txtype);
2260 musb_writeb(epio, MUSB_TXINTERVAL,
2261 musb->context.index_regs[i].txinterval);
2262 musb_writeb(epio, MUSB_RXTYPE,
2263 musb->context.index_regs[i].rxtype);
2264 musb_writeb(epio, MUSB_RXINTERVAL,
2265
2266 musb->context.index_regs[i].rxinterval);
2267 musb_write_txfunaddr(musb_base, i,
2268 musb->context.index_regs[i].txfunaddr);
2269 musb_write_txhubaddr(musb_base, i,
2270 musb->context.index_regs[i].txhubaddr);
2271 musb_write_txhubport(musb_base, i,
2272 musb->context.index_regs[i].txhubport);
2273
2274 ep_target_regs =
2275 musb_read_target_reg_base(i, musb_base);
2276
2277 musb_write_rxfunaddr(ep_target_regs,
2278 musb->context.index_regs[i].rxfunaddr);
2279 musb_write_rxhubaddr(ep_target_regs,
2280 musb->context.index_regs[i].rxhubaddr);
2281 musb_write_rxhubport(ep_target_regs,
2282 musb->context.index_regs[i].rxhubport);
2283 }
2284 }
2285 musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
2286}
2287
2288static int musb_suspend(struct device *dev)
2289{
2290 struct musb *musb = dev_to_musb(dev);
2291 unsigned long flags;
2292
2293 spin_lock_irqsave(&musb->lock, flags);
2294
2295 if (is_peripheral_active(musb)) {
2296 /* FIXME force disconnect unless we know USB will wake
2297 * the system up quickly enough to respond ...
2298 */
2299 } else if (is_host_active(musb)) {
2300 /* we know all the children are suspended; sometimes
2301 * they will even be wakeup-enabled.
2302 */
2303 }
2304
2305 musb_save_context(musb);
2306
2307 spin_unlock_irqrestore(&musb->lock, flags);
2308 return 0;
2309}
2310
2311static int musb_resume_noirq(struct device *dev)
2312{
2313 struct musb *musb = dev_to_musb(dev);
2314
2315 musb_restore_context(musb);
2316
2317 /* for static cmos like DaVinci, register values were preserved
2318 * unless for some reason the whole soc powered down or the USB
2319 * module got reset through the PSC (vs just being disabled).
2320 */
2321 return 0;
2322}
2323
2324static int musb_runtime_suspend(struct device *dev)
2325{
2326 struct musb *musb = dev_to_musb(dev);
2327
2328 musb_save_context(musb);
2329
2330 return 0;
2331}
2332
2333static int musb_runtime_resume(struct device *dev)
2334{
2335 struct musb *musb = dev_to_musb(dev);
2336 static int first = 1;
2337
2338 /*
2339 * When pm_runtime_get_sync called for the first time in driver
2340 * init, some of the structure is still not initialized which is
2341 * used in restore function. But clock needs to be
2342 * enabled before any register access, so
2343 * pm_runtime_get_sync has to be called.
2344 * Also context restore without save does not make
2345 * any sense
2346 */
2347 if (!first)
2348 musb_restore_context(musb);
2349 first = 0;
2350
2351 return 0;
2352}
2353
2354static const struct dev_pm_ops musb_dev_pm_ops = {
2355 .suspend = musb_suspend,
2356 .resume_noirq = musb_resume_noirq,
2357 .runtime_suspend = musb_runtime_suspend,
2358 .runtime_resume = musb_runtime_resume,
2359};
2360
2361#define MUSB_DEV_PM_OPS (&musb_dev_pm_ops)
2362#else
2363#define MUSB_DEV_PM_OPS NULL
2364#endif
2365
2366static struct platform_driver musb_driver = {
2367 .driver = {
2368 .name = (char *)musb_driver_name,
2369 .bus = &platform_bus_type,
2370 .owner = THIS_MODULE,
2371 .pm = MUSB_DEV_PM_OPS,
2372 },
2373 .remove = __exit_p(musb_remove),
2374 .shutdown = musb_shutdown,
2375};
2376
2377/*-------------------------------------------------------------------------*/
2378
2379static int __init musb_init(void)
2380{
2381 if (usb_disabled())
2382 return 0;
2383
2384 pr_info("%s: version " MUSB_VERSION ", "
2385 "?dma?"
2386 ", "
2387 "otg (peripheral+host)",
2388 musb_driver_name);
2389 return platform_driver_probe(&musb_driver, musb_probe);
2390}
2391
2392/* make us init after usbcore and i2c (transceivers, regulators, etc)
2393 * and before usb gadget and host-side drivers start to register
2394 */
2395fs_initcall(musb_init);
2396
2397static void __exit musb_cleanup(void)
2398{
2399 platform_driver_unregister(&musb_driver);
2400}
2401module_exit(musb_cleanup);