Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Phy drivers for Qualcomm and Atheros platforms
4#
5config PHY_ATH79_USB
6 tristate "Atheros AR71XX/9XXX USB PHY driver"
7 depends on OF && (ATH79 || COMPILE_TEST)
8 default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
9 select RESET_CONTROLLER
10 select GENERIC_PHY
11 help
12 Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.
13
14config PHY_QCOM_APQ8064_SATA
15 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
16 depends on ARCH_QCOM
17 depends on HAS_IOMEM
18 depends on OF
19 select GENERIC_PHY
20
21config PHY_QCOM_EDP
22 tristate "Qualcomm eDP PHY driver"
23 depends on ARCH_QCOM || COMPILE_TEST
24 depends on OF
25 depends on COMMON_CLK
26 select GENERIC_PHY
27 help
28 Enable this driver to support the Qualcomm eDP PHY found in various
29 Qualcomm chipsets.
30
31config PHY_QCOM_IPQ4019_USB
32 tristate "Qualcomm IPQ4019 USB PHY driver"
33 depends on OF && (ARCH_QCOM || COMPILE_TEST)
34 select GENERIC_PHY
35 help
36 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
37
38config PHY_QCOM_IPQ806X_SATA
39 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
40 depends on ARCH_QCOM
41 depends on HAS_IOMEM
42 depends on OF
43 select GENERIC_PHY
44
45config PHY_QCOM_PCIE2
46 tristate "Qualcomm PCIe Gen2 PHY Driver"
47 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
48 select GENERIC_PHY
49 help
50 Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
51 based PCIe controller.
52
53config PHY_QCOM_QMP
54 tristate "Qualcomm QMP PHY Driver"
55 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
56 select GENERIC_PHY
57 select MFD_SYSCON
58 help
59 Enable this to support the QMP PHY transceiver that is used
60 with controllers such as PCIe, UFS, and USB on Qualcomm chips.
61
62config PHY_QCOM_QUSB2
63 tristate "Qualcomm QUSB2 PHY Driver"
64 depends on OF && (ARCH_QCOM || COMPILE_TEST)
65 depends on NVMEM || !NVMEM
66 select GENERIC_PHY
67 help
68 Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
69 controllers on Qualcomm chips. This driver supports the high-speed
70 PHY which is usually paired with either the ChipIdea or Synopsys DWC3
71 USB IPs on MSM SOCs.
72
73config PHY_QCOM_USB_HS
74 tristate "Qualcomm USB HS PHY module"
75 depends on USB_ULPI_BUS
76 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
77 select GENERIC_PHY
78 help
79 Support for the USB high-speed ULPI compliant phy on Qualcomm
80 chipsets.
81
82config PHY_QCOM_USB_SNPS_FEMTO_V2
83 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
84 depends on OF && (ARCH_QCOM || COMPILE_TEST)
85 select GENERIC_PHY
86 help
87 Enable support for the USB high-speed SNPS Femto phy on Qualcomm
88 chipsets. This PHY has differences in the register map compared
89 to the V1 variants. The PHY is paired with a Synopsys DWC3 USB
90 controller on Qualcomm SOCs.
91
92config PHY_QCOM_USB_HSIC
93 tristate "Qualcomm USB HSIC ULPI PHY module"
94 depends on USB_ULPI_BUS
95 select GENERIC_PHY
96 help
97 Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
98
99config PHY_QCOM_USB_HS_28NM
100 tristate "Qualcomm 28nm High-Speed PHY"
101 depends on OF && (ARCH_QCOM || COMPILE_TEST)
102 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
103 select GENERIC_PHY
104 help
105 Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
106 High-Speed PHY driver. This driver supports the Hi-Speed PHY which
107 is usually paired with either the ChipIdea or Synopsys DWC3 USB
108 IPs on MSM SOCs.
109
110config PHY_QCOM_USB_SS
111 tristate "Qualcomm USB Super-Speed PHY driver"
112 depends on OF && (ARCH_QCOM || COMPILE_TEST)
113 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
114 select GENERIC_PHY
115 help
116 Enable this to support the Super-Speed USB transceiver on various
117 Qualcomm chipsets.
118
119config PHY_QCOM_IPQ806X_USB
120 tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
121 depends on HAS_IOMEM
122 depends on OF && (ARCH_QCOM || COMPILE_TEST)
123 select GENERIC_PHY
124 help
125 This option enables support for the Synopsis PHYs present inside the
126 Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
127 both HS and SS PHY controllers.
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Phy drivers for Qualcomm and Atheros platforms
4#
5config PHY_ATH79_USB
6 tristate "Atheros AR71XX/9XXX USB PHY driver"
7 depends on OF && (ATH79 || COMPILE_TEST)
8 default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
9 select RESET_CONTROLLER
10 select GENERIC_PHY
11 help
12 Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.
13
14config PHY_QCOM_APQ8064_SATA
15 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
16 depends on ARCH_QCOM
17 depends on HAS_IOMEM
18 depends on OF
19 select GENERIC_PHY
20
21config PHY_QCOM_EDP
22 tristate "Qualcomm eDP PHY driver"
23 depends on ARCH_QCOM || COMPILE_TEST
24 depends on OF
25 depends on COMMON_CLK
26 select GENERIC_PHY
27 help
28 Enable this driver to support the Qualcomm eDP PHY found in various
29 Qualcomm chipsets.
30
31config PHY_QCOM_IPQ4019_USB
32 tristate "Qualcomm IPQ4019 USB PHY driver"
33 depends on OF && (ARCH_QCOM || COMPILE_TEST)
34 select GENERIC_PHY
35 help
36 Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
37
38config PHY_QCOM_IPQ806X_SATA
39 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
40 depends on ARCH_QCOM
41 depends on HAS_IOMEM
42 depends on OF
43 select GENERIC_PHY
44
45config PHY_QCOM_PCIE2
46 tristate "Qualcomm PCIe Gen2 PHY Driver"
47 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
48 select GENERIC_PHY
49 help
50 Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
51 based PCIe controller.
52
53menuconfig PHY_QCOM_QMP
54 tristate "Qualcomm QMP PHY Drivers"
55 depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
56
57if PHY_QCOM_QMP
58
59config PHY_QCOM_QMP_COMBO
60 tristate "Qualcomm QMP Combo PHY Driver"
61 default PHY_QCOM_QMP
62 depends on TYPEC || TYPEC=n
63 depends on DRM || DRM=n
64 select GENERIC_PHY
65 select MFD_SYSCON
66 select DRM_AUX_BRIDGE if DRM_BRIDGE
67 help
68 Enable this to support the QMP Combo PHY transceiver that is used
69 with USB3 and DisplayPort controllers on Qualcomm chips.
70
71config PHY_QCOM_QMP_PCIE
72 tristate "Qualcomm QMP PCIe PHY Driver"
73 depends on PCI || COMPILE_TEST
74 select GENERIC_PHY
75 default PHY_QCOM_QMP
76 help
77 Enable this to support the QMP PCIe PHY transceiver that is used
78 with PCIe controllers on Qualcomm chips.
79
80config PHY_QCOM_QMP_PCIE_8996
81 tristate "Qualcomm QMP PCIe 8996 PHY Driver"
82 depends on PCI || COMPILE_TEST
83 select GENERIC_PHY
84 default PHY_QCOM_QMP
85 help
86 Enable this to support the QMP PCIe PHY transceiver that is used
87 with PCIe controllers on Qualcomm msm8996 chips.
88
89config PHY_QCOM_QMP_UFS
90 tristate "Qualcomm QMP UFS PHY Driver"
91 select GENERIC_PHY
92 default PHY_QCOM_QMP
93 help
94 Enable this to support the QMP UFS PHY transceiver that is used
95 with UFS controllers on Qualcomm chips.
96
97config PHY_QCOM_QMP_USB
98 tristate "Qualcomm QMP USB PHY Driver"
99 select GENERIC_PHY
100 default PHY_QCOM_QMP
101 help
102 Enable this to support the QMP USB PHY transceiver that is used
103 with USB3 controllers on Qualcomm chips.
104
105config PHY_QCOM_QMP_USB_LEGACY
106 tristate "Qualcomm QMP legacy USB PHY Driver"
107 select GENERIC_PHY
108 default n
109 help
110 Enable this legacy driver to support the QMP USB+DisplayPort Combo
111 PHY transceivers working only in USB3 mode on Qualcomm chips. This
112 driver exists only for compatibility with older device trees,
113 existing users have been migrated to PHY_QCOM_QMP_COMBO driver.
114
115endif # PHY_QCOM_QMP
116
117config PHY_QCOM_QUSB2
118 tristate "Qualcomm QUSB2 PHY Driver"
119 depends on OF && (ARCH_QCOM || COMPILE_TEST)
120 depends on NVMEM || !NVMEM
121 select GENERIC_PHY
122 help
123 Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
124 controllers on Qualcomm chips. This driver supports the high-speed
125 PHY which is usually paired with either the ChipIdea or Synopsys DWC3
126 USB IPs on MSM SOCs.
127
128config PHY_QCOM_SNPS_EUSB2
129 tristate "Qualcomm SNPS eUSB2 PHY Driver"
130 depends on OF && (ARCH_QCOM || COMPILE_TEST)
131 select GENERIC_PHY
132 help
133 Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm
134 chipsets. The PHY is paired with a Synopsys DWC3 USB controller
135 on Qualcomm SOCs.
136
137config PHY_QCOM_EUSB2_REPEATER
138 tristate "Qualcomm SNPS eUSB2 Repeater Driver"
139 depends on OF && (ARCH_QCOM || COMPILE_TEST)
140 select GENERIC_PHY
141 help
142 Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm
143 PMICs. The repeater is paired with a Synopsys eUSB2 Phy
144 on Qualcomm SOCs.
145
146config PHY_QCOM_M31_USB
147 tristate "Qualcomm M31 HS PHY driver support"
148 depends on USB && (ARCH_QCOM || COMPILE_TEST)
149 select GENERIC_PHY
150 help
151 Enable this to support M31 HS PHY transceivers on Qualcomm chips
152 with DWC3 USB core. It handles PHY initialization, clock
153 management required after resetting the hardware and power
154 management. This driver is required even for peripheral only or
155 host only mode configurations.
156
157config PHY_QCOM_USB_HS
158 tristate "Qualcomm USB HS PHY module"
159 depends on USB_ULPI_BUS
160 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
161 select GENERIC_PHY
162 help
163 Support for the USB high-speed ULPI compliant phy on Qualcomm
164 chipsets.
165
166config PHY_QCOM_USB_SNPS_FEMTO_V2
167 tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
168 depends on OF && (ARCH_QCOM || COMPILE_TEST)
169 select GENERIC_PHY
170 help
171 Enable support for the USB high-speed SNPS Femto phy on Qualcomm
172 chipsets. This PHY has differences in the register map compared
173 to the V1 variants. The PHY is paired with a Synopsys DWC3 USB
174 controller on Qualcomm SOCs.
175
176config PHY_QCOM_USB_HSIC
177 tristate "Qualcomm USB HSIC ULPI PHY module"
178 depends on USB_ULPI_BUS
179 select GENERIC_PHY
180 help
181 Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
182
183config PHY_QCOM_USB_HS_28NM
184 tristate "Qualcomm 28nm High-Speed PHY"
185 depends on OF && (ARCH_QCOM || COMPILE_TEST)
186 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
187 select GENERIC_PHY
188 help
189 Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
190 High-Speed PHY driver. This driver supports the Hi-Speed PHY which
191 is usually paired with either the ChipIdea or Synopsys DWC3 USB
192 IPs on MSM SOCs.
193
194config PHY_QCOM_USB_SS
195 tristate "Qualcomm USB Super-Speed PHY driver"
196 depends on OF && (ARCH_QCOM || COMPILE_TEST)
197 depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
198 select GENERIC_PHY
199 help
200 Enable this to support the Super-Speed USB transceiver on various
201 Qualcomm chipsets.
202
203config PHY_QCOM_IPQ806X_USB
204 tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
205 depends on HAS_IOMEM
206 depends on OF && (ARCH_QCOM || COMPILE_TEST)
207 select GENERIC_PHY
208 help
209 This option enables support for the Synopsis PHYs present inside the
210 Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
211 both HS and SS PHY controllers.
212
213config PHY_QCOM_SGMII_ETH
214 tristate "Qualcomm DWMAC SGMII SerDes/PHY driver"
215 depends on OF && (ARCH_QCOM || COMPILE_TEST)
216 depends on HAS_IOMEM
217 select GENERIC_PHY
218 help
219 Enable this to support the internal SerDes/SGMII PHY on various
220 Qualcomm chipsets.