1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Phy drivers for Qualcomm and Atheros platforms
  4#
  5config PHY_ATH79_USB
  6	tristate "Atheros AR71XX/9XXX USB PHY driver"
  7	depends on OF && (ATH79 || COMPILE_TEST)
  8	default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
  9	select RESET_CONTROLLER
 10	select GENERIC_PHY
 11	help
 12	  Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.
 13
 14config PHY_QCOM_APQ8064_SATA
 15	tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 16	depends on ARCH_QCOM
 17	depends on HAS_IOMEM
 18	depends on OF
 19	select GENERIC_PHY
 20
 21config PHY_QCOM_EDP
 22	tristate "Qualcomm eDP PHY driver"
 23	depends on ARCH_QCOM || COMPILE_TEST
 24	depends on OF
 25	depends on COMMON_CLK
 26	select GENERIC_PHY
 27	help
 28	  Enable this driver to support the Qualcomm eDP PHY found in various
 29	  Qualcomm chipsets.
 30
 31config PHY_QCOM_IPQ4019_USB
 32	tristate "Qualcomm IPQ4019 USB PHY driver"
 33	depends on OF && (ARCH_QCOM || COMPILE_TEST)
 34	select GENERIC_PHY
 35	help
 36	  Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
 37
 38config PHY_QCOM_IPQ806X_SATA
 39	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 40	depends on ARCH_QCOM
 41	depends on HAS_IOMEM
 42	depends on OF
 43	select GENERIC_PHY
 44
 45config PHY_QCOM_PCIE2
 46	tristate "Qualcomm PCIe Gen2 PHY Driver"
 47	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
 48	select GENERIC_PHY
 49	help
 50	  Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
 51	  based PCIe controller.
 52
 53config PHY_QCOM_QMP
 54	tristate "Qualcomm QMP PHY Driver"
 55	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
 56	select GENERIC_PHY
 57	select MFD_SYSCON
 58	help
 59	  Enable this to support the QMP PHY transceiver that is used
 60	  with controllers such as PCIe, UFS, and USB on Qualcomm chips.
 61
 62config PHY_QCOM_QUSB2
 63	tristate "Qualcomm QUSB2 PHY Driver"
 64	depends on OF && (ARCH_QCOM || COMPILE_TEST)
 65	depends on NVMEM || !NVMEM
 66	select GENERIC_PHY
 67	help
 68	  Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
 69	  controllers on Qualcomm chips. This driver supports the high-speed
 70	  PHY which is usually paired with either the ChipIdea or Synopsys DWC3
 71	  USB IPs on MSM SOCs.
 72
 73config PHY_QCOM_USB_HS
 74	tristate "Qualcomm USB HS PHY module"
 75	depends on USB_ULPI_BUS
 76	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
 77	select GENERIC_PHY
 78	help
 79	  Support for the USB high-speed ULPI compliant phy on Qualcomm
 80	  chipsets.
 81
 82config PHY_QCOM_USB_SNPS_FEMTO_V2
 83	tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
 84	depends on OF && (ARCH_QCOM || COMPILE_TEST)
 85	select GENERIC_PHY
 86	help
 87	  Enable support for the USB high-speed SNPS Femto phy on Qualcomm
 88	  chipsets.  This PHY has differences in the register map compared
 89	  to the V1 variants.  The PHY is paired with a Synopsys DWC3 USB
 90	  controller on Qualcomm SOCs.
 91
 92config PHY_QCOM_USB_HSIC
 93	tristate "Qualcomm USB HSIC ULPI PHY module"
 94	depends on USB_ULPI_BUS
 95	select GENERIC_PHY
 96	help
 97	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
 98
 99config PHY_QCOM_USB_HS_28NM
100	tristate "Qualcomm 28nm High-Speed PHY"
101	depends on OF && (ARCH_QCOM || COMPILE_TEST)
102	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
103	select GENERIC_PHY
104	help
105	  Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
106	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
107	  is usually paired with either the ChipIdea or Synopsys DWC3 USB
108	  IPs on MSM SOCs.
109
110config PHY_QCOM_USB_SS
111	tristate "Qualcomm USB Super-Speed PHY driver"
112	depends on OF && (ARCH_QCOM || COMPILE_TEST)
113	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
114	select GENERIC_PHY
115	help
116	  Enable this to support the Super-Speed USB transceiver on various
117	  Qualcomm chipsets.
118
119config PHY_QCOM_IPQ806X_USB
120	tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
121	depends on HAS_IOMEM
122	depends on OF && (ARCH_QCOM || COMPILE_TEST)
123	select GENERIC_PHY
124	help
125	  This option enables support for the Synopsis PHYs present inside the
126	  Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
127	  both HS and SS PHY controllers.