Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2011 - 2014 Xilinx
4 * Copyright (C) 2012 National Instruments Corp.
5 */
6/dts-v1/;
7#include "zynq-7000.dtsi"
8
9/ {
10 model = "Xilinx ZC702 board";
11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
12
13 aliases {
14 ethernet0 = &gem0;
15 i2c0 = &i2c0;
16 serial0 = &uart1;
17 mmc0 = &sdhci0;
18 };
19
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x40000000>;
23 };
24
25 chosen {
26 bootargs = "";
27 stdout-path = "serial0:115200n8";
28 };
29
30 gpio-keys {
31 compatible = "gpio-keys";
32 autorepeat;
33 switch-14 {
34 label = "sw14";
35 gpios = <&gpio0 12 0>;
36 linux,code = <108>; /* down */
37 wakeup-source;
38 autorepeat;
39 };
40 switch-13 {
41 label = "sw13";
42 gpios = <&gpio0 14 0>;
43 linux,code = <103>; /* up */
44 wakeup-source;
45 autorepeat;
46 };
47 };
48
49 leds {
50 compatible = "gpio-leds";
51
52 led-ds23 {
53 label = "ds23";
54 gpios = <&gpio0 10 0>;
55 linux,default-trigger = "heartbeat";
56 };
57 };
58
59 usb_phy0: phy0 {
60 compatible = "usb-nop-xceiv";
61 #phy-cells = <0>;
62 };
63};
64
65&amba {
66 ocm: sram@fffc0000 {
67 compatible = "mmio-sram";
68 reg = <0xfffc0000 0x10000>;
69 #address-cells = <1>;
70 #size-cells = <1>;
71 ranges = <0 0xfffc0000 0x10000>;
72 ocm-sram@0 {
73 reg = <0x0 0x10000>;
74 };
75 };
76};
77
78&can0 {
79 status = "okay";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_can0_default>;
82};
83
84&clkc {
85 ps-clk-frequency = <33333333>;
86};
87
88&gem0 {
89 status = "okay";
90 phy-mode = "rgmii-id";
91 phy-handle = <ðernet_phy>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_gem0_default>;
94
95 ethernet_phy: ethernet-phy@7 {
96 reg = <7>;
97 device_type = "ethernet-phy";
98 };
99};
100
101&gpio0 {
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_gpio0_default>;
104};
105
106&i2c0 {
107 status = "okay";
108 clock-frequency = <400000>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_i2c0_default>;
111
112 i2c-mux@74 {
113 compatible = "nxp,pca9548";
114 #address-cells = <1>;
115 #size-cells = <0>;
116 reg = <0x74>;
117
118 i2c@0 {
119 #address-cells = <1>;
120 #size-cells = <0>;
121 reg = <0>;
122 si570: clock-generator@5d {
123 #clock-cells = <0>;
124 compatible = "silabs,si570";
125 temperature-stability = <50>;
126 reg = <0x5d>;
127 factory-fout = <156250000>;
128 clock-frequency = <148500000>;
129 };
130 };
131
132 i2c@1 {
133 #address-cells = <1>;
134 #size-cells = <0>;
135 reg = <1>;
136 adv7511: hdmi-tx@39 {
137 compatible = "adi,adv7511";
138 reg = <0x39>;
139 adi,input-depth = <8>;
140 adi,input-colorspace = "yuv422";
141 adi,input-clock = "1x";
142 adi,input-style = <3>;
143 adi,input-justification = "right";
144 };
145 };
146
147 i2c@2 {
148 #address-cells = <1>;
149 #size-cells = <0>;
150 reg = <2>;
151 eeprom@54 {
152 compatible = "atmel,24c08";
153 reg = <0x54>;
154 };
155 };
156
157 i2c@3 {
158 #address-cells = <1>;
159 #size-cells = <0>;
160 reg = <3>;
161 gpio@21 {
162 compatible = "ti,tca6416";
163 reg = <0x21>;
164 gpio-controller;
165 #gpio-cells = <2>;
166 };
167 };
168
169 i2c@4 {
170 #address-cells = <1>;
171 #size-cells = <0>;
172 reg = <4>;
173 rtc@51 {
174 compatible = "nxp,pcf8563";
175 reg = <0x51>;
176 };
177 };
178
179 i2c@7 {
180 #address-cells = <1>;
181 #size-cells = <0>;
182 reg = <7>;
183 hwmon@34 {
184 compatible = "ti,ucd9248";
185 reg = <0x34>;
186 };
187 hwmon@35 {
188 compatible = "ti,ucd9248";
189 reg = <0x35>;
190 };
191 hwmon@36 {
192 compatible = "ti,ucd9248";
193 reg = <0x36>;
194 };
195 };
196 };
197};
198
199&pinctrl0 {
200 pinctrl_can0_default: can0-default {
201 mux {
202 function = "can0";
203 groups = "can0_9_grp";
204 };
205
206 conf {
207 groups = "can0_9_grp";
208 slew-rate = <0>;
209 io-standard = <1>;
210 };
211
212 conf-rx {
213 pins = "MIO46";
214 bias-high-impedance;
215 };
216
217 conf-tx {
218 pins = "MIO47";
219 bias-disable;
220 };
221 };
222
223 pinctrl_gem0_default: gem0-default {
224 mux {
225 function = "ethernet0";
226 groups = "ethernet0_0_grp";
227 };
228
229 conf {
230 groups = "ethernet0_0_grp";
231 slew-rate = <0>;
232 io-standard = <4>;
233 };
234
235 conf-rx {
236 pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
237 bias-high-impedance;
238 low-power-disable;
239 };
240
241 conf-tx {
242 pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
243 bias-disable;
244 low-power-enable;
245 };
246
247 mux-mdio {
248 function = "mdio0";
249 groups = "mdio0_0_grp";
250 };
251
252 conf-mdio {
253 groups = "mdio0_0_grp";
254 slew-rate = <0>;
255 io-standard = <1>;
256 bias-disable;
257 };
258 };
259
260 pinctrl_gpio0_default: gpio0-default {
261 mux {
262 function = "gpio0";
263 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
264 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
265 "gpio0_13_grp", "gpio0_14_grp";
266 };
267
268 conf {
269 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
270 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
271 "gpio0_13_grp", "gpio0_14_grp";
272 slew-rate = <0>;
273 io-standard = <1>;
274 };
275
276 conf-pull-up {
277 pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
278 bias-pull-up;
279 };
280
281 conf-pull-none {
282 pins = "MIO7", "MIO8";
283 bias-disable;
284 };
285 };
286
287 pinctrl_i2c0_default: i2c0-default {
288 mux {
289 groups = "i2c0_10_grp";
290 function = "i2c0";
291 };
292
293 conf {
294 groups = "i2c0_10_grp";
295 bias-pull-up;
296 slew-rate = <0>;
297 io-standard = <1>;
298 };
299 };
300
301 pinctrl_sdhci0_default: sdhci0-default {
302 mux {
303 groups = "sdio0_2_grp";
304 function = "sdio0";
305 };
306
307 conf {
308 groups = "sdio0_2_grp";
309 slew-rate = <0>;
310 io-standard = <1>;
311 bias-disable;
312 };
313
314 mux-cd {
315 groups = "gpio0_0_grp";
316 function = "sdio0_cd";
317 };
318
319 conf-cd {
320 groups = "gpio0_0_grp";
321 bias-high-impedance;
322 bias-pull-up;
323 slew-rate = <0>;
324 io-standard = <1>;
325 };
326
327 mux-wp {
328 groups = "gpio0_15_grp";
329 function = "sdio0_wp";
330 };
331
332 conf-wp {
333 groups = "gpio0_15_grp";
334 bias-high-impedance;
335 bias-pull-up;
336 slew-rate = <0>;
337 io-standard = <1>;
338 };
339 };
340
341 pinctrl_uart1_default: uart1-default {
342 mux {
343 groups = "uart1_10_grp";
344 function = "uart1";
345 };
346
347 conf {
348 groups = "uart1_10_grp";
349 slew-rate = <0>;
350 io-standard = <1>;
351 };
352
353 conf-rx {
354 pins = "MIO49";
355 bias-high-impedance;
356 };
357
358 conf-tx {
359 pins = "MIO48";
360 bias-disable;
361 };
362 };
363
364 pinctrl_usb0_default: usb0-default {
365 mux {
366 groups = "usb0_0_grp";
367 function = "usb0";
368 };
369
370 conf {
371 groups = "usb0_0_grp";
372 slew-rate = <0>;
373 io-standard = <1>;
374 };
375
376 conf-rx {
377 pins = "MIO29", "MIO31", "MIO36";
378 bias-high-impedance;
379 };
380
381 conf-tx {
382 pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
383 "MIO35", "MIO37", "MIO38", "MIO39";
384 bias-disable;
385 };
386 };
387};
388
389&sdhci0 {
390 status = "okay";
391 pinctrl-names = "default";
392 pinctrl-0 = <&pinctrl_sdhci0_default>;
393};
394
395&uart1 {
396 status = "okay";
397 pinctrl-names = "default";
398 pinctrl-0 = <&pinctrl_uart1_default>;
399};
400
401&usb0 {
402 status = "okay";
403 dr_mode = "host";
404 usb-phy = <&usb_phy0>;
405 pinctrl-names = "default";
406 pinctrl-0 = <&pinctrl_usb0_default>;
407};
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2011 - 2014 Xilinx
4 * Copyright (C) 2012 National Instruments Corp.
5 */
6/dts-v1/;
7#include "zynq-7000.dtsi"
8
9/ {
10 model = "Xilinx ZC702 board";
11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
12
13 aliases {
14 ethernet0 = &gem0;
15 i2c0 = &i2c0;
16 serial0 = &uart1;
17 mmc0 = &sdhci0;
18 };
19
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x40000000>;
23 };
24
25 chosen {
26 bootargs = "";
27 stdout-path = "serial0:115200n8";
28 };
29
30 gpio-keys {
31 compatible = "gpio-keys";
32 autorepeat;
33 sw14 {
34 label = "sw14";
35 gpios = <&gpio0 12 0>;
36 linux,code = <108>; /* down */
37 wakeup-source;
38 autorepeat;
39 };
40 sw13 {
41 label = "sw13";
42 gpios = <&gpio0 14 0>;
43 linux,code = <103>; /* up */
44 wakeup-source;
45 autorepeat;
46 };
47 };
48
49 leds {
50 compatible = "gpio-leds";
51
52 ds23 {
53 label = "ds23";
54 gpios = <&gpio0 10 0>;
55 linux,default-trigger = "heartbeat";
56 };
57 };
58
59 usb_phy0: phy0 {
60 compatible = "usb-nop-xceiv";
61 #phy-cells = <0>;
62 };
63};
64
65&amba {
66 ocm: sram@fffc0000 {
67 compatible = "mmio-sram";
68 reg = <0xfffc0000 0x10000>;
69 };
70};
71
72&can0 {
73 status = "okay";
74 pinctrl-names = "default";
75 pinctrl-0 = <&pinctrl_can0_default>;
76};
77
78&clkc {
79 ps-clk-frequency = <33333333>;
80};
81
82&gem0 {
83 status = "okay";
84 phy-mode = "rgmii-id";
85 phy-handle = <ðernet_phy>;
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_gem0_default>;
88
89 ethernet_phy: ethernet-phy@7 {
90 reg = <7>;
91 device_type = "ethernet-phy";
92 };
93};
94
95&gpio0 {
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_gpio0_default>;
98};
99
100&i2c0 {
101 status = "okay";
102 clock-frequency = <400000>;
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_i2c0_default>;
105
106 i2c-mux@74 {
107 compatible = "nxp,pca9548";
108 #address-cells = <1>;
109 #size-cells = <0>;
110 reg = <0x74>;
111
112 i2c@0 {
113 #address-cells = <1>;
114 #size-cells = <0>;
115 reg = <0>;
116 si570: clock-generator@5d {
117 #clock-cells = <0>;
118 compatible = "silabs,si570";
119 temperature-stability = <50>;
120 reg = <0x5d>;
121 factory-fout = <156250000>;
122 clock-frequency = <148500000>;
123 };
124 };
125
126 i2c@1 {
127 #address-cells = <1>;
128 #size-cells = <0>;
129 reg = <1>;
130 adv7511: hdmi-tx@39 {
131 compatible = "adi,adv7511";
132 reg = <0x39>;
133 adi,input-depth = <8>;
134 adi,input-colorspace = "yuv422";
135 adi,input-clock = "1x";
136 adi,input-style = <3>;
137 adi,input-justification = "right";
138 };
139 };
140
141 i2c@2 {
142 #address-cells = <1>;
143 #size-cells = <0>;
144 reg = <2>;
145 eeprom@54 {
146 compatible = "atmel,24c08";
147 reg = <0x54>;
148 };
149 };
150
151 i2c@3 {
152 #address-cells = <1>;
153 #size-cells = <0>;
154 reg = <3>;
155 gpio@21 {
156 compatible = "ti,tca6416";
157 reg = <0x21>;
158 gpio-controller;
159 #gpio-cells = <2>;
160 };
161 };
162
163 i2c@4 {
164 #address-cells = <1>;
165 #size-cells = <0>;
166 reg = <4>;
167 rtc@51 {
168 compatible = "nxp,pcf8563";
169 reg = <0x51>;
170 };
171 };
172
173 i2c@7 {
174 #address-cells = <1>;
175 #size-cells = <0>;
176 reg = <7>;
177 hwmon@34 {
178 compatible = "ti,ucd9248";
179 reg = <0x34>;
180 };
181 hwmon@35 {
182 compatible = "ti,ucd9248";
183 reg = <0x35>;
184 };
185 hwmon@36 {
186 compatible = "ti,ucd9248";
187 reg = <0x36>;
188 };
189 };
190 };
191};
192
193&pinctrl0 {
194 pinctrl_can0_default: can0-default {
195 mux {
196 function = "can0";
197 groups = "can0_9_grp";
198 };
199
200 conf {
201 groups = "can0_9_grp";
202 slew-rate = <0>;
203 io-standard = <1>;
204 };
205
206 conf-rx {
207 pins = "MIO46";
208 bias-high-impedance;
209 };
210
211 conf-tx {
212 pins = "MIO47";
213 bias-disable;
214 };
215 };
216
217 pinctrl_gem0_default: gem0-default {
218 mux {
219 function = "ethernet0";
220 groups = "ethernet0_0_grp";
221 };
222
223 conf {
224 groups = "ethernet0_0_grp";
225 slew-rate = <0>;
226 io-standard = <4>;
227 };
228
229 conf-rx {
230 pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
231 bias-high-impedance;
232 low-power-disable;
233 };
234
235 conf-tx {
236 pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
237 bias-disable;
238 low-power-enable;
239 };
240
241 mux-mdio {
242 function = "mdio0";
243 groups = "mdio0_0_grp";
244 };
245
246 conf-mdio {
247 groups = "mdio0_0_grp";
248 slew-rate = <0>;
249 io-standard = <1>;
250 bias-disable;
251 };
252 };
253
254 pinctrl_gpio0_default: gpio0-default {
255 mux {
256 function = "gpio0";
257 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
258 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
259 "gpio0_13_grp", "gpio0_14_grp";
260 };
261
262 conf {
263 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
264 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
265 "gpio0_13_grp", "gpio0_14_grp";
266 slew-rate = <0>;
267 io-standard = <1>;
268 };
269
270 conf-pull-up {
271 pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
272 bias-pull-up;
273 };
274
275 conf-pull-none {
276 pins = "MIO7", "MIO8";
277 bias-disable;
278 };
279 };
280
281 pinctrl_i2c0_default: i2c0-default {
282 mux {
283 groups = "i2c0_10_grp";
284 function = "i2c0";
285 };
286
287 conf {
288 groups = "i2c0_10_grp";
289 bias-pull-up;
290 slew-rate = <0>;
291 io-standard = <1>;
292 };
293 };
294
295 pinctrl_sdhci0_default: sdhci0-default {
296 mux {
297 groups = "sdio0_2_grp";
298 function = "sdio0";
299 };
300
301 conf {
302 groups = "sdio0_2_grp";
303 slew-rate = <0>;
304 io-standard = <1>;
305 bias-disable;
306 };
307
308 mux-cd {
309 groups = "gpio0_0_grp";
310 function = "sdio0_cd";
311 };
312
313 conf-cd {
314 groups = "gpio0_0_grp";
315 bias-high-impedance;
316 bias-pull-up;
317 slew-rate = <0>;
318 io-standard = <1>;
319 };
320
321 mux-wp {
322 groups = "gpio0_15_grp";
323 function = "sdio0_wp";
324 };
325
326 conf-wp {
327 groups = "gpio0_15_grp";
328 bias-high-impedance;
329 bias-pull-up;
330 slew-rate = <0>;
331 io-standard = <1>;
332 };
333 };
334
335 pinctrl_uart1_default: uart1-default {
336 mux {
337 groups = "uart1_10_grp";
338 function = "uart1";
339 };
340
341 conf {
342 groups = "uart1_10_grp";
343 slew-rate = <0>;
344 io-standard = <1>;
345 };
346
347 conf-rx {
348 pins = "MIO49";
349 bias-high-impedance;
350 };
351
352 conf-tx {
353 pins = "MIO48";
354 bias-disable;
355 };
356 };
357
358 pinctrl_usb0_default: usb0-default {
359 mux {
360 groups = "usb0_0_grp";
361 function = "usb0";
362 };
363
364 conf {
365 groups = "usb0_0_grp";
366 slew-rate = <0>;
367 io-standard = <1>;
368 };
369
370 conf-rx {
371 pins = "MIO29", "MIO31", "MIO36";
372 bias-high-impedance;
373 };
374
375 conf-tx {
376 pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
377 "MIO35", "MIO37", "MIO38", "MIO39";
378 bias-disable;
379 };
380 };
381};
382
383&sdhci0 {
384 status = "okay";
385 pinctrl-names = "default";
386 pinctrl-0 = <&pinctrl_sdhci0_default>;
387};
388
389&uart1 {
390 status = "okay";
391 pinctrl-names = "default";
392 pinctrl-0 = <&pinctrl_uart1_default>;
393};
394
395&usb0 {
396 status = "okay";
397 dr_mode = "host";
398 usb-phy = <&usb_phy0>;
399 pinctrl-names = "default";
400 pinctrl-0 = <&pinctrl_usb0_default>;
401};