Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2011 - 2014 Xilinx
4 * Copyright (C) 2012 National Instruments Corp.
5 */
6/dts-v1/;
7#include "zynq-7000.dtsi"
8
9/ {
10 model = "Xilinx ZC702 board";
11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
12
13 aliases {
14 ethernet0 = &gem0;
15 i2c0 = &i2c0;
16 serial0 = &uart1;
17 mmc0 = &sdhci0;
18 };
19
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x40000000>;
23 };
24
25 chosen {
26 bootargs = "";
27 stdout-path = "serial0:115200n8";
28 };
29
30 gpio-keys {
31 compatible = "gpio-keys";
32 autorepeat;
33 switch-14 {
34 label = "sw14";
35 gpios = <&gpio0 12 0>;
36 linux,code = <108>; /* down */
37 wakeup-source;
38 autorepeat;
39 };
40 switch-13 {
41 label = "sw13";
42 gpios = <&gpio0 14 0>;
43 linux,code = <103>; /* up */
44 wakeup-source;
45 autorepeat;
46 };
47 };
48
49 leds {
50 compatible = "gpio-leds";
51
52 led-ds23 {
53 label = "ds23";
54 gpios = <&gpio0 10 0>;
55 linux,default-trigger = "heartbeat";
56 };
57 };
58
59 usb_phy0: phy0 {
60 compatible = "usb-nop-xceiv";
61 #phy-cells = <0>;
62 };
63};
64
65&amba {
66 ocm: sram@fffc0000 {
67 compatible = "mmio-sram";
68 reg = <0xfffc0000 0x10000>;
69 #address-cells = <1>;
70 #size-cells = <1>;
71 ranges = <0 0xfffc0000 0x10000>;
72 ocm-sram@0 {
73 reg = <0x0 0x10000>;
74 };
75 };
76};
77
78&can0 {
79 status = "okay";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_can0_default>;
82};
83
84&clkc {
85 ps-clk-frequency = <33333333>;
86};
87
88&gem0 {
89 status = "okay";
90 phy-mode = "rgmii-id";
91 phy-handle = <ðernet_phy>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_gem0_default>;
94
95 ethernet_phy: ethernet-phy@7 {
96 reg = <7>;
97 device_type = "ethernet-phy";
98 };
99};
100
101&gpio0 {
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_gpio0_default>;
104};
105
106&i2c0 {
107 status = "okay";
108 clock-frequency = <400000>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_i2c0_default>;
111
112 i2c-mux@74 {
113 compatible = "nxp,pca9548";
114 #address-cells = <1>;
115 #size-cells = <0>;
116 reg = <0x74>;
117
118 i2c@0 {
119 #address-cells = <1>;
120 #size-cells = <0>;
121 reg = <0>;
122 si570: clock-generator@5d {
123 #clock-cells = <0>;
124 compatible = "silabs,si570";
125 temperature-stability = <50>;
126 reg = <0x5d>;
127 factory-fout = <156250000>;
128 clock-frequency = <148500000>;
129 };
130 };
131
132 i2c@1 {
133 #address-cells = <1>;
134 #size-cells = <0>;
135 reg = <1>;
136 adv7511: hdmi-tx@39 {
137 compatible = "adi,adv7511";
138 reg = <0x39>;
139 adi,input-depth = <8>;
140 adi,input-colorspace = "yuv422";
141 adi,input-clock = "1x";
142 adi,input-style = <3>;
143 adi,input-justification = "right";
144 };
145 };
146
147 i2c@2 {
148 #address-cells = <1>;
149 #size-cells = <0>;
150 reg = <2>;
151 eeprom@54 {
152 compatible = "atmel,24c08";
153 reg = <0x54>;
154 };
155 };
156
157 i2c@3 {
158 #address-cells = <1>;
159 #size-cells = <0>;
160 reg = <3>;
161 gpio@21 {
162 compatible = "ti,tca6416";
163 reg = <0x21>;
164 gpio-controller;
165 #gpio-cells = <2>;
166 };
167 };
168
169 i2c@4 {
170 #address-cells = <1>;
171 #size-cells = <0>;
172 reg = <4>;
173 rtc@51 {
174 compatible = "nxp,pcf8563";
175 reg = <0x51>;
176 };
177 };
178
179 i2c@7 {
180 #address-cells = <1>;
181 #size-cells = <0>;
182 reg = <7>;
183 hwmon@34 {
184 compatible = "ti,ucd9248";
185 reg = <0x34>;
186 };
187 hwmon@35 {
188 compatible = "ti,ucd9248";
189 reg = <0x35>;
190 };
191 hwmon@36 {
192 compatible = "ti,ucd9248";
193 reg = <0x36>;
194 };
195 };
196 };
197};
198
199&pinctrl0 {
200 pinctrl_can0_default: can0-default {
201 mux {
202 function = "can0";
203 groups = "can0_9_grp";
204 };
205
206 conf {
207 groups = "can0_9_grp";
208 slew-rate = <0>;
209 io-standard = <1>;
210 };
211
212 conf-rx {
213 pins = "MIO46";
214 bias-high-impedance;
215 };
216
217 conf-tx {
218 pins = "MIO47";
219 bias-disable;
220 };
221 };
222
223 pinctrl_gem0_default: gem0-default {
224 mux {
225 function = "ethernet0";
226 groups = "ethernet0_0_grp";
227 };
228
229 conf {
230 groups = "ethernet0_0_grp";
231 slew-rate = <0>;
232 io-standard = <4>;
233 };
234
235 conf-rx {
236 pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
237 bias-high-impedance;
238 low-power-disable;
239 };
240
241 conf-tx {
242 pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
243 bias-disable;
244 low-power-enable;
245 };
246
247 mux-mdio {
248 function = "mdio0";
249 groups = "mdio0_0_grp";
250 };
251
252 conf-mdio {
253 groups = "mdio0_0_grp";
254 slew-rate = <0>;
255 io-standard = <1>;
256 bias-disable;
257 };
258 };
259
260 pinctrl_gpio0_default: gpio0-default {
261 mux {
262 function = "gpio0";
263 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
264 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
265 "gpio0_13_grp", "gpio0_14_grp";
266 };
267
268 conf {
269 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
270 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
271 "gpio0_13_grp", "gpio0_14_grp";
272 slew-rate = <0>;
273 io-standard = <1>;
274 };
275
276 conf-pull-up {
277 pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
278 bias-pull-up;
279 };
280
281 conf-pull-none {
282 pins = "MIO7", "MIO8";
283 bias-disable;
284 };
285 };
286
287 pinctrl_i2c0_default: i2c0-default {
288 mux {
289 groups = "i2c0_10_grp";
290 function = "i2c0";
291 };
292
293 conf {
294 groups = "i2c0_10_grp";
295 bias-pull-up;
296 slew-rate = <0>;
297 io-standard = <1>;
298 };
299 };
300
301 pinctrl_sdhci0_default: sdhci0-default {
302 mux {
303 groups = "sdio0_2_grp";
304 function = "sdio0";
305 };
306
307 conf {
308 groups = "sdio0_2_grp";
309 slew-rate = <0>;
310 io-standard = <1>;
311 bias-disable;
312 };
313
314 mux-cd {
315 groups = "gpio0_0_grp";
316 function = "sdio0_cd";
317 };
318
319 conf-cd {
320 groups = "gpio0_0_grp";
321 bias-high-impedance;
322 bias-pull-up;
323 slew-rate = <0>;
324 io-standard = <1>;
325 };
326
327 mux-wp {
328 groups = "gpio0_15_grp";
329 function = "sdio0_wp";
330 };
331
332 conf-wp {
333 groups = "gpio0_15_grp";
334 bias-high-impedance;
335 bias-pull-up;
336 slew-rate = <0>;
337 io-standard = <1>;
338 };
339 };
340
341 pinctrl_uart1_default: uart1-default {
342 mux {
343 groups = "uart1_10_grp";
344 function = "uart1";
345 };
346
347 conf {
348 groups = "uart1_10_grp";
349 slew-rate = <0>;
350 io-standard = <1>;
351 };
352
353 conf-rx {
354 pins = "MIO49";
355 bias-high-impedance;
356 };
357
358 conf-tx {
359 pins = "MIO48";
360 bias-disable;
361 };
362 };
363
364 pinctrl_usb0_default: usb0-default {
365 mux {
366 groups = "usb0_0_grp";
367 function = "usb0";
368 };
369
370 conf {
371 groups = "usb0_0_grp";
372 slew-rate = <0>;
373 io-standard = <1>;
374 };
375
376 conf-rx {
377 pins = "MIO29", "MIO31", "MIO36";
378 bias-high-impedance;
379 };
380
381 conf-tx {
382 pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
383 "MIO35", "MIO37", "MIO38", "MIO39";
384 bias-disable;
385 };
386 };
387};
388
389&sdhci0 {
390 status = "okay";
391 pinctrl-names = "default";
392 pinctrl-0 = <&pinctrl_sdhci0_default>;
393};
394
395&uart1 {
396 status = "okay";
397 pinctrl-names = "default";
398 pinctrl-0 = <&pinctrl_uart1_default>;
399};
400
401&usb0 {
402 status = "okay";
403 dr_mode = "host";
404 usb-phy = <&usb_phy0>;
405 pinctrl-names = "default";
406 pinctrl-0 = <&pinctrl_usb0_default>;
407};
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2011 - 2014 Xilinx
4 * Copyright (C) 2012 National Instruments Corp.
5 */
6/dts-v1/;
7#include "zynq-7000.dtsi"
8
9/ {
10 model = "Zynq ZC702 Development Board";
11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
12
13 aliases {
14 ethernet0 = &gem0;
15 i2c0 = &i2c0;
16 serial0 = &uart1;
17 };
18
19 memory@0 {
20 device_type = "memory";
21 reg = <0x0 0x40000000>;
22 };
23
24 chosen {
25 bootargs = "";
26 stdout-path = "serial0:115200n8";
27 };
28
29 gpio-keys {
30 compatible = "gpio-keys";
31 #address-cells = <1>;
32 #size-cells = <0>;
33 autorepeat;
34 sw14 {
35 label = "sw14";
36 gpios = <&gpio0 12 0>;
37 linux,code = <108>; /* down */
38 wakeup-source;
39 autorepeat;
40 };
41 sw13 {
42 label = "sw13";
43 gpios = <&gpio0 14 0>;
44 linux,code = <103>; /* up */
45 wakeup-source;
46 autorepeat;
47 };
48 };
49
50 leds {
51 compatible = "gpio-leds";
52
53 ds23 {
54 label = "ds23";
55 gpios = <&gpio0 10 0>;
56 linux,default-trigger = "heartbeat";
57 };
58 };
59
60 usb_phy0: phy0 {
61 compatible = "usb-nop-xceiv";
62 #phy-cells = <0>;
63 };
64};
65
66&amba {
67 ocm: sram@fffc0000 {
68 compatible = "mmio-sram";
69 reg = <0xfffc0000 0x10000>;
70 };
71};
72
73&can0 {
74 status = "okay";
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_can0_default>;
77};
78
79&clkc {
80 ps-clk-frequency = <33333333>;
81};
82
83&gem0 {
84 status = "okay";
85 phy-mode = "rgmii-id";
86 phy-handle = <ðernet_phy>;
87 pinctrl-names = "default";
88 pinctrl-0 = <&pinctrl_gem0_default>;
89
90 ethernet_phy: ethernet-phy@7 {
91 reg = <7>;
92 device_type = "ethernet-phy";
93 };
94};
95
96&gpio0 {
97 pinctrl-names = "default";
98 pinctrl-0 = <&pinctrl_gpio0_default>;
99};
100
101&i2c0 {
102 status = "okay";
103 clock-frequency = <400000>;
104 pinctrl-names = "default";
105 pinctrl-0 = <&pinctrl_i2c0_default>;
106
107 i2c-mux@74 {
108 compatible = "nxp,pca9548";
109 #address-cells = <1>;
110 #size-cells = <0>;
111 reg = <0x74>;
112
113 i2c@0 {
114 #address-cells = <1>;
115 #size-cells = <0>;
116 reg = <0>;
117 si570: clock-generator@5d {
118 #clock-cells = <0>;
119 compatible = "silabs,si570";
120 temperature-stability = <50>;
121 reg = <0x5d>;
122 factory-fout = <156250000>;
123 clock-frequency = <148500000>;
124 };
125 };
126
127 i2c@1 {
128 #address-cells = <1>;
129 #size-cells = <0>;
130 reg = <1>;
131 adv7511: hdmi-tx@39 {
132 compatible = "adi,adv7511";
133 reg = <0x39>;
134 adi,input-depth = <8>;
135 adi,input-colorspace = "yuv422";
136 adi,input-clock = "1x";
137 adi,input-style = <3>;
138 adi,input-justification = "right";
139 };
140 };
141
142 i2c@2 {
143 #address-cells = <1>;
144 #size-cells = <0>;
145 reg = <2>;
146 eeprom@54 {
147 compatible = "atmel,24c08";
148 reg = <0x54>;
149 };
150 };
151
152 i2c@3 {
153 #address-cells = <1>;
154 #size-cells = <0>;
155 reg = <3>;
156 gpio@21 {
157 compatible = "ti,tca6416";
158 reg = <0x21>;
159 gpio-controller;
160 #gpio-cells = <2>;
161 };
162 };
163
164 i2c@4 {
165 #address-cells = <1>;
166 #size-cells = <0>;
167 reg = <4>;
168 rtc@51 {
169 compatible = "nxp,pcf8563";
170 reg = <0x51>;
171 };
172 };
173
174 i2c@7 {
175 #address-cells = <1>;
176 #size-cells = <0>;
177 reg = <7>;
178 hwmon@52 {
179 compatible = "ti,ucd9248";
180 reg = <52>;
181 };
182 hwmon@53 {
183 compatible = "ti,ucd9248";
184 reg = <53>;
185 };
186 hwmon@54 {
187 compatible = "ti,ucd9248";
188 reg = <54>;
189 };
190 };
191 };
192};
193
194&pinctrl0 {
195 pinctrl_can0_default: can0-default {
196 mux {
197 function = "can0";
198 groups = "can0_9_grp";
199 };
200
201 conf {
202 groups = "can0_9_grp";
203 slew-rate = <0>;
204 io-standard = <1>;
205 };
206
207 conf-rx {
208 pins = "MIO46";
209 bias-high-impedance;
210 };
211
212 conf-tx {
213 pins = "MIO47";
214 bias-disable;
215 };
216 };
217
218 pinctrl_gem0_default: gem0-default {
219 mux {
220 function = "ethernet0";
221 groups = "ethernet0_0_grp";
222 };
223
224 conf {
225 groups = "ethernet0_0_grp";
226 slew-rate = <0>;
227 io-standard = <4>;
228 };
229
230 conf-rx {
231 pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
232 bias-high-impedance;
233 low-power-disable;
234 };
235
236 conf-tx {
237 pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
238 bias-disable;
239 low-power-enable;
240 };
241
242 mux-mdio {
243 function = "mdio0";
244 groups = "mdio0_0_grp";
245 };
246
247 conf-mdio {
248 groups = "mdio0_0_grp";
249 slew-rate = <0>;
250 io-standard = <1>;
251 bias-disable;
252 };
253 };
254
255 pinctrl_gpio0_default: gpio0-default {
256 mux {
257 function = "gpio0";
258 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
259 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
260 "gpio0_13_grp", "gpio0_14_grp";
261 };
262
263 conf {
264 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
265 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
266 "gpio0_13_grp", "gpio0_14_grp";
267 slew-rate = <0>;
268 io-standard = <1>;
269 };
270
271 conf-pull-up {
272 pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
273 bias-pull-up;
274 };
275
276 conf-pull-none {
277 pins = "MIO7", "MIO8";
278 bias-disable;
279 };
280 };
281
282 pinctrl_i2c0_default: i2c0-default {
283 mux {
284 groups = "i2c0_10_grp";
285 function = "i2c0";
286 };
287
288 conf {
289 groups = "i2c0_10_grp";
290 bias-pull-up;
291 slew-rate = <0>;
292 io-standard = <1>;
293 };
294 };
295
296 pinctrl_sdhci0_default: sdhci0-default {
297 mux {
298 groups = "sdio0_2_grp";
299 function = "sdio0";
300 };
301
302 conf {
303 groups = "sdio0_2_grp";
304 slew-rate = <0>;
305 io-standard = <1>;
306 bias-disable;
307 };
308
309 mux-cd {
310 groups = "gpio0_0_grp";
311 function = "sdio0_cd";
312 };
313
314 conf-cd {
315 groups = "gpio0_0_grp";
316 bias-high-impedance;
317 bias-pull-up;
318 slew-rate = <0>;
319 io-standard = <1>;
320 };
321
322 mux-wp {
323 groups = "gpio0_15_grp";
324 function = "sdio0_wp";
325 };
326
327 conf-wp {
328 groups = "gpio0_15_grp";
329 bias-high-impedance;
330 bias-pull-up;
331 slew-rate = <0>;
332 io-standard = <1>;
333 };
334 };
335
336 pinctrl_uart1_default: uart1-default {
337 mux {
338 groups = "uart1_10_grp";
339 function = "uart1";
340 };
341
342 conf {
343 groups = "uart1_10_grp";
344 slew-rate = <0>;
345 io-standard = <1>;
346 };
347
348 conf-rx {
349 pins = "MIO49";
350 bias-high-impedance;
351 };
352
353 conf-tx {
354 pins = "MIO48";
355 bias-disable;
356 };
357 };
358
359 pinctrl_usb0_default: usb0-default {
360 mux {
361 groups = "usb0_0_grp";
362 function = "usb0";
363 };
364
365 conf {
366 groups = "usb0_0_grp";
367 slew-rate = <0>;
368 io-standard = <1>;
369 };
370
371 conf-rx {
372 pins = "MIO29", "MIO31", "MIO36";
373 bias-high-impedance;
374 };
375
376 conf-tx {
377 pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
378 "MIO35", "MIO37", "MIO38", "MIO39";
379 bias-disable;
380 };
381 };
382};
383
384&sdhci0 {
385 status = "okay";
386 pinctrl-names = "default";
387 pinctrl-0 = <&pinctrl_sdhci0_default>;
388};
389
390&uart1 {
391 status = "okay";
392 pinctrl-names = "default";
393 pinctrl-0 = <&pinctrl_uart1_default>;
394};
395
396&usb0 {
397 status = "okay";
398 dr_mode = "host";
399 usb-phy = <&usb_phy0>;
400 pinctrl-names = "default";
401 pinctrl-0 = <&pinctrl_usb0_default>;
402};