Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 * Copyright (c) 2014 Collabora Ltd.
8 * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
9 * Anand Moon <linux.amoon@gmail.com>
10 */
11
12#include <dt-bindings/input/input.h>
13#include "exynos5422-odroid-core.dtsi"
14
15/ {
16 gpio-keys {
17 compatible = "gpio-keys";
18 pinctrl-names = "default";
19 pinctrl-0 = <&power_key>;
20
21 power-key {
22 /*
23 * The power button (SW2) is connected to the PWRON
24 * pin (active high) of the S2MPS11 PMIC, which acts
25 * as a 16ms debouce filter and signal inverter with
26 * output on ONOB pin (active low). ONOB PMIC pin is
27 * then connected to XEINT3 SoC pin.
28 */
29 gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
30 linux,code = <KEY_POWER>;
31 label = "power key";
32 debounce-interval = <0>;
33 wakeup-source;
34 };
35 };
36
37 emmc_pwrseq: pwrseq {
38 pinctrl-0 = <&emmc_nrst_pin>;
39 pinctrl-names = "default";
40 compatible = "mmc-pwrseq-emmc";
41 reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
42 };
43
44 fan0: pwm-fan {
45 compatible = "pwm-fan";
46 pwms = <&pwm 0 20972 0>;
47 #cooling-cells = <2>;
48 cooling-levels = <0 130 170 230>;
49 };
50
51 thermal-zones {
52 cpu0_thermal: cpu0-thermal {
53 thermal-sensors = <&tmu_cpu0 0>;
54 polling-delay-passive = <250>;
55 polling-delay = <0>;
56 trips {
57 cpu0_alert0: cpu-alert-0 {
58 temperature = <50000>; /* millicelsius */
59 hysteresis = <5000>; /* millicelsius */
60 type = "active";
61 };
62 cpu0_alert1: cpu-alert-1 {
63 temperature = <60000>; /* millicelsius */
64 hysteresis = <5000>; /* millicelsius */
65 type = "active";
66 };
67 cpu0_alert2: cpu-alert-2 {
68 temperature = <70000>; /* millicelsius */
69 hysteresis = <5000>; /* millicelsius */
70 type = "active";
71 };
72 cpu0_crit0: cpu-crit-0 {
73 temperature = <120000>; /* millicelsius */
74 hysteresis = <0>; /* millicelsius */
75 type = "critical";
76 };
77 /*
78 * Exynos542x supports only 4 trip-points
79 * so for these polling mode is required.
80 * Start polling at temperature level of last
81 * interrupt-driven trip: cpu0_alert2
82 */
83 cpu0_alert3: cpu-alert-3 {
84 temperature = <70000>; /* millicelsius */
85 hysteresis = <10000>; /* millicelsius */
86 type = "passive";
87 };
88 cpu0_alert4: cpu-alert-4 {
89 temperature = <85000>; /* millicelsius */
90 hysteresis = <10000>; /* millicelsius */
91 type = "passive";
92 };
93 };
94 cooling-maps {
95 map0 {
96 trip = <&cpu0_alert0>;
97 cooling-device = <&fan0 0 1>;
98 };
99 map1 {
100 trip = <&cpu0_alert1>;
101 cooling-device = <&fan0 1 2>;
102 };
103 map2 {
104 trip = <&cpu0_alert2>;
105 cooling-device = <&fan0 2 3>;
106 };
107 /*
108 * When reaching cpu0_alert3, reduce CPU
109 * by 2 steps. On Exynos5422/5800 that would
110 * (usually) be: 1800 MHz and 1200 MHz.
111 */
112 map3 {
113 trip = <&cpu0_alert3>;
114 cooling-device = <&cpu0 0 2>,
115 <&cpu1 0 2>,
116 <&cpu2 0 2>,
117 <&cpu3 0 2>,
118 <&cpu4 0 2>,
119 <&cpu5 0 2>,
120 <&cpu6 0 2>,
121 <&cpu7 0 2>;
122 };
123 /*
124 * When reaching cpu0_alert4, reduce CPU
125 * further, down to 600 MHz (14 steps for big,
126 * 8 steps for LITTLE).
127 */
128 cpu0_cooling_map4: map4 {
129 trip = <&cpu0_alert4>;
130 cooling-device = <&cpu0 3 8>,
131 <&cpu1 3 8>,
132 <&cpu2 3 8>,
133 <&cpu3 3 8>,
134 <&cpu4 3 14>,
135 <&cpu5 3 14>,
136 <&cpu6 3 14>,
137 <&cpu7 3 14>;
138 };
139 };
140 };
141 cpu1_thermal: cpu1-thermal {
142 thermal-sensors = <&tmu_cpu1 0>;
143 polling-delay-passive = <250>;
144 polling-delay = <0>;
145 trips {
146 cpu1_alert0: cpu-alert-0 {
147 temperature = <50000>;
148 hysteresis = <5000>;
149 type = "active";
150 };
151 cpu1_alert1: cpu-alert-1 {
152 temperature = <60000>;
153 hysteresis = <5000>;
154 type = "active";
155 };
156 cpu1_alert2: cpu-alert-2 {
157 temperature = <70000>;
158 hysteresis = <5000>;
159 type = "active";
160 };
161 cpu1_crit0: cpu-crit-0 {
162 temperature = <120000>;
163 hysteresis = <0>;
164 type = "critical";
165 };
166 cpu1_alert3: cpu-alert-3 {
167 temperature = <70000>;
168 hysteresis = <10000>;
169 type = "passive";
170 };
171 cpu1_alert4: cpu-alert-4 {
172 temperature = <85000>;
173 hysteresis = <10000>;
174 type = "passive";
175 };
176 };
177 cooling-maps {
178 map0 {
179 trip = <&cpu1_alert0>;
180 cooling-device = <&fan0 0 1>;
181 };
182 map1 {
183 trip = <&cpu1_alert1>;
184 cooling-device = <&fan0 1 2>;
185 };
186 map2 {
187 trip = <&cpu1_alert2>;
188 cooling-device = <&fan0 2 3>;
189 };
190 map3 {
191 trip = <&cpu1_alert3>;
192 cooling-device = <&cpu0 0 2>,
193 <&cpu1 0 2>,
194 <&cpu2 0 2>,
195 <&cpu3 0 2>,
196 <&cpu4 0 2>,
197 <&cpu5 0 2>,
198 <&cpu6 0 2>,
199 <&cpu7 0 2>;
200 };
201 cpu1_cooling_map4: map4 {
202 trip = <&cpu1_alert4>;
203 cooling-device = <&cpu0 3 8>,
204 <&cpu1 3 8>,
205 <&cpu2 3 8>,
206 <&cpu3 3 8>,
207 <&cpu4 3 14>,
208 <&cpu5 3 14>,
209 <&cpu6 3 14>,
210 <&cpu7 3 14>;
211 };
212 };
213 };
214 cpu2_thermal: cpu2-thermal {
215 thermal-sensors = <&tmu_cpu2 0>;
216 polling-delay-passive = <250>;
217 polling-delay = <0>;
218 trips {
219 cpu2_alert0: cpu-alert-0 {
220 temperature = <50000>;
221 hysteresis = <5000>;
222 type = "active";
223 };
224 cpu2_alert1: cpu-alert-1 {
225 temperature = <60000>;
226 hysteresis = <5000>;
227 type = "active";
228 };
229 cpu2_alert2: cpu-alert-2 {
230 temperature = <70000>;
231 hysteresis = <5000>;
232 type = "active";
233 };
234 cpu2_crit0: cpu-crit-0 {
235 temperature = <120000>;
236 hysteresis = <0>;
237 type = "critical";
238 };
239 cpu2_alert3: cpu-alert-3 {
240 temperature = <70000>;
241 hysteresis = <10000>;
242 type = "passive";
243 };
244 cpu2_alert4: cpu-alert-4 {
245 temperature = <85000>;
246 hysteresis = <10000>;
247 type = "passive";
248 };
249 };
250 cooling-maps {
251 map0 {
252 trip = <&cpu2_alert0>;
253 cooling-device = <&fan0 0 1>;
254 };
255 map1 {
256 trip = <&cpu2_alert1>;
257 cooling-device = <&fan0 1 2>;
258 };
259 map2 {
260 trip = <&cpu2_alert2>;
261 cooling-device = <&fan0 2 3>;
262 };
263 map3 {
264 trip = <&cpu2_alert3>;
265 cooling-device = <&cpu0 0 2>,
266 <&cpu1 0 2>,
267 <&cpu2 0 2>,
268 <&cpu3 0 2>,
269 <&cpu4 0 2>,
270 <&cpu5 0 2>,
271 <&cpu6 0 2>,
272 <&cpu7 0 2>;
273 };
274 cpu2_cooling_map4: map4 {
275 trip = <&cpu2_alert4>;
276 cooling-device = <&cpu0 3 8>,
277 <&cpu1 3 8>,
278 <&cpu2 3 8>,
279 <&cpu3 3 8>,
280 <&cpu4 3 14>,
281 <&cpu5 3 14>,
282 <&cpu6 3 14>,
283 <&cpu7 3 14>;
284 };
285 };
286 };
287 cpu3_thermal: cpu3-thermal {
288 thermal-sensors = <&tmu_cpu3 0>;
289 polling-delay-passive = <250>;
290 polling-delay = <0>;
291 trips {
292 cpu3_alert0: cpu-alert-0 {
293 temperature = <50000>;
294 hysteresis = <5000>;
295 type = "active";
296 };
297 cpu3_alert1: cpu-alert-1 {
298 temperature = <60000>;
299 hysteresis = <5000>;
300 type = "active";
301 };
302 cpu3_alert2: cpu-alert-2 {
303 temperature = <70000>;
304 hysteresis = <5000>;
305 type = "active";
306 };
307 cpu3_crit0: cpu-crit-0 {
308 temperature = <120000>;
309 hysteresis = <0>;
310 type = "critical";
311 };
312 cpu3_alert3: cpu-alert-3 {
313 temperature = <70000>;
314 hysteresis = <10000>;
315 type = "passive";
316 };
317 cpu3_alert4: cpu-alert-4 {
318 temperature = <85000>;
319 hysteresis = <10000>;
320 type = "passive";
321 };
322 };
323 cooling-maps {
324 map0 {
325 trip = <&cpu3_alert0>;
326 cooling-device = <&fan0 0 1>;
327 };
328 map1 {
329 trip = <&cpu3_alert1>;
330 cooling-device = <&fan0 1 2>;
331 };
332 map2 {
333 trip = <&cpu3_alert2>;
334 cooling-device = <&fan0 2 3>;
335 };
336 map3 {
337 trip = <&cpu3_alert3>;
338 cooling-device = <&cpu0 0 2>,
339 <&cpu1 0 2>,
340 <&cpu2 0 2>,
341 <&cpu3 0 2>,
342 <&cpu4 0 2>,
343 <&cpu5 0 2>,
344 <&cpu6 0 2>,
345 <&cpu7 0 2>;
346 };
347 cpu3_cooling_map4: map4 {
348 trip = <&cpu3_alert4>;
349 cooling-device = <&cpu0 3 8>,
350 <&cpu1 3 8>,
351 <&cpu2 3 8>,
352 <&cpu3 3 8>,
353 <&cpu4 3 14>,
354 <&cpu5 3 14>,
355 <&cpu6 3 14>,
356 <&cpu7 3 14>;
357 };
358 };
359 };
360 gpu_thermal: gpu-thermal {
361 thermal-sensors = <&tmu_gpu 0>;
362 polling-delay-passive = <250>;
363 polling-delay = <0>;
364 trips {
365 gpu_alert0: gpu-alert-0 {
366 temperature = <50000>;
367 hysteresis = <5000>;
368 type = "active";
369 };
370 gpu_alert1: gpu-alert-1 {
371 temperature = <60000>;
372 hysteresis = <5000>;
373 type = "active";
374 };
375 gpu_alert2: gpu-alert-2 {
376 temperature = <70000>;
377 hysteresis = <5000>;
378 type = "active";
379 };
380 gpu_crit0: gpu-crit-0 {
381 temperature = <120000>;
382 hysteresis = <0>;
383 type = "critical";
384 };
385 gpu_alert3: gpu-alert-3 {
386 temperature = <70000>;
387 hysteresis = <10000>;
388 type = "passive";
389 };
390 gpu_alert4: gpu-alert-4 {
391 temperature = <85000>;
392 hysteresis = <10000>;
393 type = "passive";
394 };
395 };
396 cooling-maps {
397 map0 {
398 trip = <&gpu_alert0>;
399 cooling-device = <&fan0 0 1>;
400 };
401 map1 {
402 trip = <&gpu_alert1>;
403 cooling-device = <&fan0 1 2>;
404 };
405 map2 {
406 trip = <&gpu_alert2>;
407 cooling-device = <&fan0 2 3>;
408 };
409 map3 {
410 trip = <&gpu_alert3>;
411 cooling-device = <&gpu 0 2>;
412 };
413 map4 {
414 trip = <&gpu_alert4>;
415 cooling-device = <&gpu 3 6>;
416 };
417 };
418 };
419 };
420};
421
422&buck10_reg {
423 /* Supplies vmmc-supply of mmc_0 */
424 regulator-always-on;
425 regulator-boot-on;
426};
427
428&hdmi {
429 status = "okay";
430 ddc = <&i2c_2>;
431 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
432 pinctrl-names = "default";
433 pinctrl-0 = <&hdmi_hpd_irq>;
434
435 vdd_osc-supply = <&ldo7_reg>;
436 vdd_pll-supply = <&ldo6_reg>;
437 vdd-supply = <&ldo6_reg>;
438};
439
440&hdmicec {
441 status = "okay";
442 needs-hpd;
443};
444
445&i2c_2 {
446 samsung,i2c-sda-delay = <100>;
447 samsung,i2c-max-bus-freq = <66000>;
448 /* used by HDMI DDC */
449 status = "okay";
450};
451
452&ldo26_reg {
453 regulator-min-microvolt = <3000000>;
454 regulator-max-microvolt = <3000000>;
455 regulator-always-on;
456};
457
458&mixer {
459 status = "okay";
460};
461
462&mmc_0 {
463 status = "okay";
464 mmc-pwrseq = <&emmc_pwrseq>;
465 card-detect-delay = <200>;
466 samsung,dw-mshc-ciu-div = <3>;
467 samsung,dw-mshc-sdr-timing = <0 4>;
468 samsung,dw-mshc-ddr-timing = <0 2>;
469 samsung,dw-mshc-hs400-timing = <0 2>;
470 samsung,read-strobe-delay = <90>;
471 pinctrl-names = "default";
472 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
473 bus-width = <8>;
474 cap-mmc-highspeed;
475 mmc-hs200-1_8v;
476 mmc-hs400-1_8v;
477 max-frequency = <200000000>;
478 vmmc-supply = <&ldo18_reg>;
479 vqmmc-supply = <&ldo3_reg>;
480};
481
482&pinctrl_0 {
483 power_key: power-key-pins {
484 samsung,pins = "gpx0-3";
485 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
486 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
487 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
488 };
489
490 hdmi_hpd_irq: hdmi-hpd-irq-pins {
491 samsung,pins = "gpx3-7";
492 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
493 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
494 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
495 };
496};
497
498&pinctrl_1 {
499 emmc_nrst_pin: emmc-nrst-pins {
500 samsung,pins = "gpd1-0";
501 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
502 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
503 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
504 };
505};
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 * Copyright (c) 2014 Collabora Ltd.
8 * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
9 * Anand Moon <linux.amoon@gmail.com>
10 */
11
12#include <dt-bindings/input/input.h>
13#include "exynos5422-odroid-core.dtsi"
14
15/ {
16 gpio_keys {
17 compatible = "gpio-keys";
18 pinctrl-names = "default";
19 pinctrl-0 = <&power_key>;
20
21 power_key {
22 /*
23 * The power button (SW2) is connected to the PWRON
24 * pin (active high) of the S2MPS11 PMIC, which acts
25 * as a 16ms debouce filter and signal inverter with
26 * output on ONOB pin (active low). ONOB PMIC pin is
27 * then connected to XEINT3 SoC pin.
28 */
29 gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
30 linux,code = <KEY_POWER>;
31 label = "power key";
32 debounce-interval = <0>;
33 wakeup-source;
34 };
35 };
36
37 emmc_pwrseq: pwrseq {
38 pinctrl-0 = <&emmc_nrst_pin>;
39 pinctrl-names = "default";
40 compatible = "mmc-pwrseq-emmc";
41 reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
42 };
43
44 fan0: pwm-fan {
45 compatible = "pwm-fan";
46 pwms = <&pwm 0 20972 0>;
47 #cooling-cells = <2>;
48 cooling-levels = <0 130 170 230>;
49 };
50
51 thermal-zones {
52 cpu0_thermal: cpu0-thermal {
53 thermal-sensors = <&tmu_cpu0 0>;
54 polling-delay-passive = <250>;
55 polling-delay = <0>;
56 trips {
57 cpu0_alert0: cpu-alert-0 {
58 temperature = <50000>; /* millicelsius */
59 hysteresis = <5000>; /* millicelsius */
60 type = "active";
61 };
62 cpu0_alert1: cpu-alert-1 {
63 temperature = <60000>; /* millicelsius */
64 hysteresis = <5000>; /* millicelsius */
65 type = "active";
66 };
67 cpu0_alert2: cpu-alert-2 {
68 temperature = <70000>; /* millicelsius */
69 hysteresis = <5000>; /* millicelsius */
70 type = "active";
71 };
72 cpu0_crit0: cpu-crit-0 {
73 temperature = <120000>; /* millicelsius */
74 hysteresis = <0>; /* millicelsius */
75 type = "critical";
76 };
77 /*
78 * Exynos542x supports only 4 trip-points
79 * so for these polling mode is required.
80 * Start polling at temperature level of last
81 * interrupt-driven trip: cpu0_alert2
82 */
83 cpu0_alert3: cpu-alert-3 {
84 temperature = <70000>; /* millicelsius */
85 hysteresis = <10000>; /* millicelsius */
86 type = "passive";
87 };
88 cpu0_alert4: cpu-alert-4 {
89 temperature = <85000>; /* millicelsius */
90 hysteresis = <10000>; /* millicelsius */
91 type = "passive";
92 };
93 };
94 cooling-maps {
95 map0 {
96 trip = <&cpu0_alert0>;
97 cooling-device = <&fan0 0 1>;
98 };
99 map1 {
100 trip = <&cpu0_alert1>;
101 cooling-device = <&fan0 1 2>;
102 };
103 map2 {
104 trip = <&cpu0_alert2>;
105 cooling-device = <&fan0 2 3>;
106 };
107 /*
108 * When reaching cpu0_alert3, reduce CPU
109 * by 2 steps. On Exynos5422/5800 that would
110 * (usually) be: 1800 MHz and 1200 MHz.
111 */
112 map3 {
113 trip = <&cpu0_alert3>;
114 cooling-device = <&cpu0 0 2>,
115 <&cpu1 0 2>,
116 <&cpu2 0 2>,
117 <&cpu3 0 2>,
118 <&cpu4 0 2>,
119 <&cpu5 0 2>,
120 <&cpu6 0 2>,
121 <&cpu7 0 2>;
122 };
123 /*
124 * When reaching cpu0_alert4, reduce CPU
125 * further, down to 600 MHz (14 steps for big,
126 * 8 steps for LITTLE).
127 */
128 cpu0_cooling_map4: map4 {
129 trip = <&cpu0_alert4>;
130 cooling-device = <&cpu0 3 8>,
131 <&cpu1 3 8>,
132 <&cpu2 3 8>,
133 <&cpu3 3 8>,
134 <&cpu4 3 14>,
135 <&cpu5 3 14>,
136 <&cpu6 3 14>,
137 <&cpu7 3 14>;
138 };
139 };
140 };
141 cpu1_thermal: cpu1-thermal {
142 thermal-sensors = <&tmu_cpu1 0>;
143 polling-delay-passive = <250>;
144 polling-delay = <0>;
145 trips {
146 cpu1_alert0: cpu-alert-0 {
147 temperature = <50000>;
148 hysteresis = <5000>;
149 type = "active";
150 };
151 cpu1_alert1: cpu-alert-1 {
152 temperature = <60000>;
153 hysteresis = <5000>;
154 type = "active";
155 };
156 cpu1_alert2: cpu-alert-2 {
157 temperature = <70000>;
158 hysteresis = <5000>;
159 type = "active";
160 };
161 cpu1_crit0: cpu-crit-0 {
162 temperature = <120000>;
163 hysteresis = <0>;
164 type = "critical";
165 };
166 cpu1_alert3: cpu-alert-3 {
167 temperature = <70000>;
168 hysteresis = <10000>;
169 type = "passive";
170 };
171 cpu1_alert4: cpu-alert-4 {
172 temperature = <85000>;
173 hysteresis = <10000>;
174 type = "passive";
175 };
176 };
177 cooling-maps {
178 map0 {
179 trip = <&cpu1_alert0>;
180 cooling-device = <&fan0 0 1>;
181 };
182 map1 {
183 trip = <&cpu1_alert1>;
184 cooling-device = <&fan0 1 2>;
185 };
186 map2 {
187 trip = <&cpu1_alert2>;
188 cooling-device = <&fan0 2 3>;
189 };
190 map3 {
191 trip = <&cpu1_alert3>;
192 cooling-device = <&cpu0 0 2>,
193 <&cpu1 0 2>,
194 <&cpu2 0 2>,
195 <&cpu3 0 2>,
196 <&cpu4 0 2>,
197 <&cpu5 0 2>,
198 <&cpu6 0 2>,
199 <&cpu7 0 2>;
200 };
201 cpu1_cooling_map4: map4 {
202 trip = <&cpu1_alert4>;
203 cooling-device = <&cpu0 3 8>,
204 <&cpu1 3 8>,
205 <&cpu2 3 8>,
206 <&cpu3 3 8>,
207 <&cpu4 3 14>,
208 <&cpu5 3 14>,
209 <&cpu6 3 14>,
210 <&cpu7 3 14>;
211 };
212 };
213 };
214 cpu2_thermal: cpu2-thermal {
215 thermal-sensors = <&tmu_cpu2 0>;
216 polling-delay-passive = <250>;
217 polling-delay = <0>;
218 trips {
219 cpu2_alert0: cpu-alert-0 {
220 temperature = <50000>;
221 hysteresis = <5000>;
222 type = "active";
223 };
224 cpu2_alert1: cpu-alert-1 {
225 temperature = <60000>;
226 hysteresis = <5000>;
227 type = "active";
228 };
229 cpu2_alert2: cpu-alert-2 {
230 temperature = <70000>;
231 hysteresis = <5000>;
232 type = "active";
233 };
234 cpu2_crit0: cpu-crit-0 {
235 temperature = <120000>;
236 hysteresis = <0>;
237 type = "critical";
238 };
239 cpu2_alert3: cpu-alert-3 {
240 temperature = <70000>;
241 hysteresis = <10000>;
242 type = "passive";
243 };
244 cpu2_alert4: cpu-alert-4 {
245 temperature = <85000>;
246 hysteresis = <10000>;
247 type = "passive";
248 };
249 };
250 cooling-maps {
251 map0 {
252 trip = <&cpu2_alert0>;
253 cooling-device = <&fan0 0 1>;
254 };
255 map1 {
256 trip = <&cpu2_alert1>;
257 cooling-device = <&fan0 1 2>;
258 };
259 map2 {
260 trip = <&cpu2_alert2>;
261 cooling-device = <&fan0 2 3>;
262 };
263 map3 {
264 trip = <&cpu2_alert3>;
265 cooling-device = <&cpu0 0 2>,
266 <&cpu1 0 2>,
267 <&cpu2 0 2>,
268 <&cpu3 0 2>,
269 <&cpu4 0 2>,
270 <&cpu5 0 2>,
271 <&cpu6 0 2>,
272 <&cpu7 0 2>;
273 };
274 cpu2_cooling_map4: map4 {
275 trip = <&cpu2_alert4>;
276 cooling-device = <&cpu0 3 8>,
277 <&cpu1 3 8>,
278 <&cpu2 3 8>,
279 <&cpu3 3 8>,
280 <&cpu4 3 14>,
281 <&cpu5 3 14>,
282 <&cpu6 3 14>,
283 <&cpu7 3 14>;
284 };
285 };
286 };
287 cpu3_thermal: cpu3-thermal {
288 thermal-sensors = <&tmu_cpu3 0>;
289 polling-delay-passive = <250>;
290 polling-delay = <0>;
291 trips {
292 cpu3_alert0: cpu-alert-0 {
293 temperature = <50000>;
294 hysteresis = <5000>;
295 type = "active";
296 };
297 cpu3_alert1: cpu-alert-1 {
298 temperature = <60000>;
299 hysteresis = <5000>;
300 type = "active";
301 };
302 cpu3_alert2: cpu-alert-2 {
303 temperature = <70000>;
304 hysteresis = <5000>;
305 type = "active";
306 };
307 cpu3_crit0: cpu-crit-0 {
308 temperature = <120000>;
309 hysteresis = <0>;
310 type = "critical";
311 };
312 cpu3_alert3: cpu-alert-3 {
313 temperature = <70000>;
314 hysteresis = <10000>;
315 type = "passive";
316 };
317 cpu3_alert4: cpu-alert-4 {
318 temperature = <85000>;
319 hysteresis = <10000>;
320 type = "passive";
321 };
322 };
323 cooling-maps {
324 map0 {
325 trip = <&cpu3_alert0>;
326 cooling-device = <&fan0 0 1>;
327 };
328 map1 {
329 trip = <&cpu3_alert1>;
330 cooling-device = <&fan0 1 2>;
331 };
332 map2 {
333 trip = <&cpu3_alert2>;
334 cooling-device = <&fan0 2 3>;
335 };
336 map3 {
337 trip = <&cpu3_alert3>;
338 cooling-device = <&cpu0 0 2>,
339 <&cpu1 0 2>,
340 <&cpu2 0 2>,
341 <&cpu3 0 2>,
342 <&cpu4 0 2>,
343 <&cpu5 0 2>,
344 <&cpu6 0 2>,
345 <&cpu7 0 2>;
346 };
347 cpu3_cooling_map4: map4 {
348 trip = <&cpu3_alert4>;
349 cooling-device = <&cpu0 3 8>,
350 <&cpu1 3 8>,
351 <&cpu2 3 8>,
352 <&cpu3 3 8>,
353 <&cpu4 3 14>,
354 <&cpu5 3 14>,
355 <&cpu6 3 14>,
356 <&cpu7 3 14>;
357 };
358 };
359 };
360 gpu_thermal: gpu-thermal {
361 thermal-sensors = <&tmu_gpu 0>;
362 polling-delay-passive = <250>;
363 polling-delay = <0>;
364 trips {
365 gpu_alert0: gpu-alert-0 {
366 temperature = <50000>;
367 hysteresis = <5000>;
368 type = "active";
369 };
370 gpu_alert1: gpu-alert-1 {
371 temperature = <60000>;
372 hysteresis = <5000>;
373 type = "active";
374 };
375 gpu_alert2: gpu-alert-2 {
376 temperature = <70000>;
377 hysteresis = <5000>;
378 type = "active";
379 };
380 gpu_crit0: gpu-crit-0 {
381 temperature = <120000>;
382 hysteresis = <0>;
383 type = "critical";
384 };
385 gpu_alert3: gpu-alert-3 {
386 temperature = <70000>;
387 hysteresis = <10000>;
388 type = "passive";
389 };
390 gpu_alert4: gpu-alert-4 {
391 temperature = <85000>;
392 hysteresis = <10000>;
393 type = "passive";
394 };
395 };
396 cooling-maps {
397 map0 {
398 trip = <&gpu_alert0>;
399 cooling-device = <&fan0 0 1>;
400 };
401 map1 {
402 trip = <&gpu_alert1>;
403 cooling-device = <&fan0 1 2>;
404 };
405 map2 {
406 trip = <&gpu_alert2>;
407 cooling-device = <&fan0 2 3>;
408 };
409 map3 {
410 trip = <&gpu_alert3>;
411 cooling-device = <&gpu 0 2>;
412 };
413 map4 {
414 trip = <&gpu_alert4>;
415 cooling-device = <&gpu 3 6>;
416 };
417 };
418 };
419 };
420};
421
422&buck10_reg {
423 /* Supplies vmmc-supply of mmc_0 */
424 regulator-always-on;
425 regulator-boot-on;
426};
427
428&hdmi {
429 status = "okay";
430 ddc = <&i2c_2>;
431 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
432 pinctrl-names = "default";
433 pinctrl-0 = <&hdmi_hpd_irq>;
434
435 vdd_osc-supply = <&ldo7_reg>;
436 vdd_pll-supply = <&ldo6_reg>;
437 vdd-supply = <&ldo6_reg>;
438};
439
440&hdmicec {
441 status = "okay";
442 needs-hpd;
443};
444
445&i2c_2 {
446 samsung,i2c-sda-delay = <100>;
447 samsung,i2c-max-bus-freq = <66000>;
448 /* used by HDMI DDC */
449 status = "okay";
450};
451
452&ldo26_reg {
453 regulator-min-microvolt = <3000000>;
454 regulator-max-microvolt = <3000000>;
455 regulator-always-on;
456};
457
458&mixer {
459 status = "okay";
460};
461
462&mmc_0 {
463 status = "okay";
464 mmc-pwrseq = <&emmc_pwrseq>;
465 card-detect-delay = <200>;
466 samsung,dw-mshc-ciu-div = <3>;
467 samsung,dw-mshc-sdr-timing = <0 4>;
468 samsung,dw-mshc-ddr-timing = <0 2>;
469 samsung,dw-mshc-hs400-timing = <0 2>;
470 samsung,read-strobe-delay = <90>;
471 pinctrl-names = "default";
472 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
473 bus-width = <8>;
474 cap-mmc-highspeed;
475 mmc-hs200-1_8v;
476 mmc-hs400-1_8v;
477 max-frequency = <200000000>;
478 vmmc-supply = <&ldo18_reg>;
479 vqmmc-supply = <&ldo3_reg>;
480};
481
482&pinctrl_0 {
483 power_key: power-key {
484 samsung,pins = "gpx0-3";
485 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
486 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
487 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
488 };
489
490 hdmi_hpd_irq: hdmi-hpd-irq {
491 samsung,pins = "gpx3-7";
492 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
493 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
494 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
495 };
496};
497
498&pinctrl_1 {
499 emmc_nrst_pin: emmc-nrst {
500 samsung,pins = "gpd1-0";
501 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
502 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
503 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
504 };
505};