Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * simple driver for PWM (Pulse Width Modulator) controller
4 *
5 * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
6 *
7 * Limitations:
8 * - When disabled the output is driven to 0 independent of the configured
9 * polarity.
10 */
11
12#include <linux/bitfield.h>
13#include <linux/bitops.h>
14#include <linux/clk.h>
15#include <linux/delay.h>
16#include <linux/err.h>
17#include <linux/io.h>
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/of.h>
21#include <linux/platform_device.h>
22#include <linux/pwm.h>
23#include <linux/slab.h>
24
25#define MX3_PWMCR 0x00 /* PWM Control Register */
26#define MX3_PWMSR 0x04 /* PWM Status Register */
27#define MX3_PWMSAR 0x0C /* PWM Sample Register */
28#define MX3_PWMPR 0x10 /* PWM Period Register */
29
30#define MX3_PWMCR_FWM GENMASK(27, 26)
31#define MX3_PWMCR_STOPEN BIT(25)
32#define MX3_PWMCR_DOZEN BIT(24)
33#define MX3_PWMCR_WAITEN BIT(23)
34#define MX3_PWMCR_DBGEN BIT(22)
35#define MX3_PWMCR_BCTR BIT(21)
36#define MX3_PWMCR_HCTR BIT(20)
37
38#define MX3_PWMCR_POUTC GENMASK(19, 18)
39#define MX3_PWMCR_POUTC_NORMAL 0
40#define MX3_PWMCR_POUTC_INVERTED 1
41#define MX3_PWMCR_POUTC_OFF 2
42
43#define MX3_PWMCR_CLKSRC GENMASK(17, 16)
44#define MX3_PWMCR_CLKSRC_OFF 0
45#define MX3_PWMCR_CLKSRC_IPG 1
46#define MX3_PWMCR_CLKSRC_IPG_HIGH 2
47#define MX3_PWMCR_CLKSRC_IPG_32K 3
48
49#define MX3_PWMCR_PRESCALER GENMASK(15, 4)
50
51#define MX3_PWMCR_SWR BIT(3)
52
53#define MX3_PWMCR_REPEAT GENMASK(2, 1)
54#define MX3_PWMCR_REPEAT_1X 0
55#define MX3_PWMCR_REPEAT_2X 1
56#define MX3_PWMCR_REPEAT_4X 2
57#define MX3_PWMCR_REPEAT_8X 3
58
59#define MX3_PWMCR_EN BIT(0)
60
61#define MX3_PWMSR_FWE BIT(6)
62#define MX3_PWMSR_CMP BIT(5)
63#define MX3_PWMSR_ROV BIT(4)
64#define MX3_PWMSR_FE BIT(3)
65
66#define MX3_PWMSR_FIFOAV GENMASK(2, 0)
67#define MX3_PWMSR_FIFOAV_EMPTY 0
68#define MX3_PWMSR_FIFOAV_1WORD 1
69#define MX3_PWMSR_FIFOAV_2WORDS 2
70#define MX3_PWMSR_FIFOAV_3WORDS 3
71#define MX3_PWMSR_FIFOAV_4WORDS 4
72
73#define MX3_PWMCR_PRESCALER_SET(x) FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
74#define MX3_PWMCR_PRESCALER_GET(x) (FIELD_GET(MX3_PWMCR_PRESCALER, \
75 (x)) + 1)
76
77#define MX3_PWM_SWR_LOOP 5
78
79/* PWMPR register value of 0xffff has the same effect as 0xfffe */
80#define MX3_PWMPR_MAX 0xfffe
81
82struct pwm_imx27_chip {
83 struct clk *clk_ipg;
84 struct clk *clk_per;
85 void __iomem *mmio_base;
86 struct pwm_chip chip;
87
88 /*
89 * The driver cannot read the current duty cycle from the hardware if
90 * the hardware is disabled. Cache the last programmed duty cycle
91 * value to return in that case.
92 */
93 unsigned int duty_cycle;
94};
95
96#define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip)
97
98static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx)
99{
100 int ret;
101
102 ret = clk_prepare_enable(imx->clk_ipg);
103 if (ret)
104 return ret;
105
106 ret = clk_prepare_enable(imx->clk_per);
107 if (ret) {
108 clk_disable_unprepare(imx->clk_ipg);
109 return ret;
110 }
111
112 return 0;
113}
114
115static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx)
116{
117 clk_disable_unprepare(imx->clk_per);
118 clk_disable_unprepare(imx->clk_ipg);
119}
120
121static int pwm_imx27_get_state(struct pwm_chip *chip,
122 struct pwm_device *pwm, struct pwm_state *state)
123{
124 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
125 u32 period, prescaler, pwm_clk, val;
126 u64 tmp;
127 int ret;
128
129 ret = pwm_imx27_clk_prepare_enable(imx);
130 if (ret < 0)
131 return ret;
132
133 val = readl(imx->mmio_base + MX3_PWMCR);
134
135 if (val & MX3_PWMCR_EN)
136 state->enabled = true;
137 else
138 state->enabled = false;
139
140 switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
141 case MX3_PWMCR_POUTC_NORMAL:
142 state->polarity = PWM_POLARITY_NORMAL;
143 break;
144 case MX3_PWMCR_POUTC_INVERTED:
145 state->polarity = PWM_POLARITY_INVERSED;
146 break;
147 default:
148 dev_warn(chip->dev, "can't set polarity, output disconnected");
149 }
150
151 prescaler = MX3_PWMCR_PRESCALER_GET(val);
152 pwm_clk = clk_get_rate(imx->clk_per);
153 val = readl(imx->mmio_base + MX3_PWMPR);
154 period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
155
156 /* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
157 tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler;
158 state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk);
159
160 /*
161 * PWMSAR can be read only if PWM is enabled. If the PWM is disabled,
162 * use the cached value.
163 */
164 if (state->enabled)
165 val = readl(imx->mmio_base + MX3_PWMSAR);
166 else
167 val = imx->duty_cycle;
168
169 tmp = NSEC_PER_SEC * (u64)(val) * prescaler;
170 state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk);
171
172 pwm_imx27_clk_disable_unprepare(imx);
173
174 return 0;
175}
176
177static void pwm_imx27_sw_reset(struct pwm_chip *chip)
178{
179 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
180 struct device *dev = chip->dev;
181 int wait_count = 0;
182 u32 cr;
183
184 writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
185 do {
186 usleep_range(200, 1000);
187 cr = readl(imx->mmio_base + MX3_PWMCR);
188 } while ((cr & MX3_PWMCR_SWR) &&
189 (wait_count++ < MX3_PWM_SWR_LOOP));
190
191 if (cr & MX3_PWMCR_SWR)
192 dev_warn(dev, "software reset timeout\n");
193}
194
195static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
196 struct pwm_device *pwm)
197{
198 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
199 struct device *dev = chip->dev;
200 unsigned int period_ms;
201 int fifoav;
202 u32 sr;
203
204 sr = readl(imx->mmio_base + MX3_PWMSR);
205 fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
206 if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
207 period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm),
208 NSEC_PER_MSEC);
209 msleep(period_ms);
210
211 sr = readl(imx->mmio_base + MX3_PWMSR);
212 if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
213 dev_warn(dev, "there is no free FIFO slot\n");
214 }
215}
216
217static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
218 const struct pwm_state *state)
219{
220 unsigned long period_cycles, duty_cycles, prescale;
221 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
222 struct pwm_state cstate;
223 unsigned long long c;
224 unsigned long long clkrate;
225 int ret;
226 u32 cr;
227
228 pwm_get_state(pwm, &cstate);
229
230 clkrate = clk_get_rate(imx->clk_per);
231 c = clkrate * state->period;
232
233 do_div(c, NSEC_PER_SEC);
234 period_cycles = c;
235
236 prescale = period_cycles / 0x10000 + 1;
237
238 period_cycles /= prescale;
239 c = clkrate * state->duty_cycle;
240 do_div(c, NSEC_PER_SEC);
241 duty_cycles = c;
242 duty_cycles /= prescale;
243
244 /*
245 * according to imx pwm RM, the real period value should be PERIOD
246 * value in PWMPR plus 2.
247 */
248 if (period_cycles > 2)
249 period_cycles -= 2;
250 else
251 period_cycles = 0;
252
253 /*
254 * Wait for a free FIFO slot if the PWM is already enabled, and flush
255 * the FIFO if the PWM was disabled and is about to be enabled.
256 */
257 if (cstate.enabled) {
258 pwm_imx27_wait_fifo_slot(chip, pwm);
259 } else {
260 ret = pwm_imx27_clk_prepare_enable(imx);
261 if (ret)
262 return ret;
263
264 pwm_imx27_sw_reset(chip);
265 }
266
267 writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
268 writel(period_cycles, imx->mmio_base + MX3_PWMPR);
269
270 /*
271 * Store the duty cycle for future reference in cases where the
272 * MX3_PWMSAR register can't be read (i.e. when the PWM is disabled).
273 */
274 imx->duty_cycle = duty_cycles;
275
276 cr = MX3_PWMCR_PRESCALER_SET(prescale) |
277 MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
278 FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
279 MX3_PWMCR_DBGEN;
280
281 if (state->polarity == PWM_POLARITY_INVERSED)
282 cr |= FIELD_PREP(MX3_PWMCR_POUTC,
283 MX3_PWMCR_POUTC_INVERTED);
284
285 if (state->enabled)
286 cr |= MX3_PWMCR_EN;
287
288 writel(cr, imx->mmio_base + MX3_PWMCR);
289
290 if (!state->enabled)
291 pwm_imx27_clk_disable_unprepare(imx);
292
293 return 0;
294}
295
296static const struct pwm_ops pwm_imx27_ops = {
297 .apply = pwm_imx27_apply,
298 .get_state = pwm_imx27_get_state,
299 .owner = THIS_MODULE,
300};
301
302static const struct of_device_id pwm_imx27_dt_ids[] = {
303 { .compatible = "fsl,imx27-pwm", },
304 { /* sentinel */ }
305};
306MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
307
308static int pwm_imx27_probe(struct platform_device *pdev)
309{
310 struct pwm_imx27_chip *imx;
311 int ret;
312 u32 pwmcr;
313
314 imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
315 if (imx == NULL)
316 return -ENOMEM;
317
318 imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
319 if (IS_ERR(imx->clk_ipg))
320 return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
321 "getting ipg clock failed\n");
322
323 imx->clk_per = devm_clk_get(&pdev->dev, "per");
324 if (IS_ERR(imx->clk_per))
325 return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
326 "failed to get peripheral clock\n");
327
328 imx->chip.ops = &pwm_imx27_ops;
329 imx->chip.dev = &pdev->dev;
330 imx->chip.npwm = 1;
331
332 imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
333 if (IS_ERR(imx->mmio_base))
334 return PTR_ERR(imx->mmio_base);
335
336 ret = pwm_imx27_clk_prepare_enable(imx);
337 if (ret)
338 return ret;
339
340 /* keep clks on if pwm is running */
341 pwmcr = readl(imx->mmio_base + MX3_PWMCR);
342 if (!(pwmcr & MX3_PWMCR_EN))
343 pwm_imx27_clk_disable_unprepare(imx);
344
345 return devm_pwmchip_add(&pdev->dev, &imx->chip);
346}
347
348static struct platform_driver imx_pwm_driver = {
349 .driver = {
350 .name = "pwm-imx27",
351 .of_match_table = pwm_imx27_dt_ids,
352 },
353 .probe = pwm_imx27_probe,
354};
355module_platform_driver(imx_pwm_driver);
356
357MODULE_LICENSE("GPL v2");
358MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * simple driver for PWM (Pulse Width Modulator) controller
4 *
5 * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
6 *
7 * Limitations:
8 * - When disabled the output is driven to 0 independent of the configured
9 * polarity.
10 */
11
12#include <linux/bitfield.h>
13#include <linux/bitops.h>
14#include <linux/clk.h>
15#include <linux/delay.h>
16#include <linux/err.h>
17#include <linux/io.h>
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/of.h>
21#include <linux/of_device.h>
22#include <linux/platform_device.h>
23#include <linux/pwm.h>
24#include <linux/slab.h>
25
26#define MX3_PWMCR 0x00 /* PWM Control Register */
27#define MX3_PWMSR 0x04 /* PWM Status Register */
28#define MX3_PWMSAR 0x0C /* PWM Sample Register */
29#define MX3_PWMPR 0x10 /* PWM Period Register */
30
31#define MX3_PWMCR_FWM GENMASK(27, 26)
32#define MX3_PWMCR_STOPEN BIT(25)
33#define MX3_PWMCR_DOZEN BIT(24)
34#define MX3_PWMCR_WAITEN BIT(23)
35#define MX3_PWMCR_DBGEN BIT(22)
36#define MX3_PWMCR_BCTR BIT(21)
37#define MX3_PWMCR_HCTR BIT(20)
38
39#define MX3_PWMCR_POUTC GENMASK(19, 18)
40#define MX3_PWMCR_POUTC_NORMAL 0
41#define MX3_PWMCR_POUTC_INVERTED 1
42#define MX3_PWMCR_POUTC_OFF 2
43
44#define MX3_PWMCR_CLKSRC GENMASK(17, 16)
45#define MX3_PWMCR_CLKSRC_OFF 0
46#define MX3_PWMCR_CLKSRC_IPG 1
47#define MX3_PWMCR_CLKSRC_IPG_HIGH 2
48#define MX3_PWMCR_CLKSRC_IPG_32K 3
49
50#define MX3_PWMCR_PRESCALER GENMASK(15, 4)
51
52#define MX3_PWMCR_SWR BIT(3)
53
54#define MX3_PWMCR_REPEAT GENMASK(2, 1)
55#define MX3_PWMCR_REPEAT_1X 0
56#define MX3_PWMCR_REPEAT_2X 1
57#define MX3_PWMCR_REPEAT_4X 2
58#define MX3_PWMCR_REPEAT_8X 3
59
60#define MX3_PWMCR_EN BIT(0)
61
62#define MX3_PWMSR_FWE BIT(6)
63#define MX3_PWMSR_CMP BIT(5)
64#define MX3_PWMSR_ROV BIT(4)
65#define MX3_PWMSR_FE BIT(3)
66
67#define MX3_PWMSR_FIFOAV GENMASK(2, 0)
68#define MX3_PWMSR_FIFOAV_EMPTY 0
69#define MX3_PWMSR_FIFOAV_1WORD 1
70#define MX3_PWMSR_FIFOAV_2WORDS 2
71#define MX3_PWMSR_FIFOAV_3WORDS 3
72#define MX3_PWMSR_FIFOAV_4WORDS 4
73
74#define MX3_PWMCR_PRESCALER_SET(x) FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1)
75#define MX3_PWMCR_PRESCALER_GET(x) (FIELD_GET(MX3_PWMCR_PRESCALER, \
76 (x)) + 1)
77
78#define MX3_PWM_SWR_LOOP 5
79
80/* PWMPR register value of 0xffff has the same effect as 0xfffe */
81#define MX3_PWMPR_MAX 0xfffe
82
83struct pwm_imx27_chip {
84 struct clk *clk_ipg;
85 struct clk *clk_per;
86 void __iomem *mmio_base;
87 struct pwm_chip chip;
88};
89
90#define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip)
91
92static int pwm_imx27_clk_prepare_enable(struct pwm_chip *chip)
93{
94 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
95 int ret;
96
97 ret = clk_prepare_enable(imx->clk_ipg);
98 if (ret)
99 return ret;
100
101 ret = clk_prepare_enable(imx->clk_per);
102 if (ret) {
103 clk_disable_unprepare(imx->clk_ipg);
104 return ret;
105 }
106
107 return 0;
108}
109
110static void pwm_imx27_clk_disable_unprepare(struct pwm_chip *chip)
111{
112 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
113
114 clk_disable_unprepare(imx->clk_per);
115 clk_disable_unprepare(imx->clk_ipg);
116}
117
118static void pwm_imx27_get_state(struct pwm_chip *chip,
119 struct pwm_device *pwm, struct pwm_state *state)
120{
121 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
122 u32 period, prescaler, pwm_clk, val;
123 u64 tmp;
124 int ret;
125
126 ret = pwm_imx27_clk_prepare_enable(chip);
127 if (ret < 0)
128 return;
129
130 val = readl(imx->mmio_base + MX3_PWMCR);
131
132 if (val & MX3_PWMCR_EN)
133 state->enabled = true;
134 else
135 state->enabled = false;
136
137 switch (FIELD_GET(MX3_PWMCR_POUTC, val)) {
138 case MX3_PWMCR_POUTC_NORMAL:
139 state->polarity = PWM_POLARITY_NORMAL;
140 break;
141 case MX3_PWMCR_POUTC_INVERTED:
142 state->polarity = PWM_POLARITY_INVERSED;
143 break;
144 default:
145 dev_warn(chip->dev, "can't set polarity, output disconnected");
146 }
147
148 prescaler = MX3_PWMCR_PRESCALER_GET(val);
149 pwm_clk = clk_get_rate(imx->clk_per);
150 pwm_clk = DIV_ROUND_CLOSEST_ULL(pwm_clk, prescaler);
151 val = readl(imx->mmio_base + MX3_PWMPR);
152 period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
153
154 /* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
155 tmp = NSEC_PER_SEC * (u64)(period + 2);
156 state->period = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
157
158 /* PWMSAR can be read only if PWM is enabled */
159 if (state->enabled) {
160 val = readl(imx->mmio_base + MX3_PWMSAR);
161 tmp = NSEC_PER_SEC * (u64)(val);
162 state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
163 } else {
164 state->duty_cycle = 0;
165 }
166
167 if (!state->enabled)
168 pwm_imx27_clk_disable_unprepare(chip);
169}
170
171static void pwm_imx27_sw_reset(struct pwm_chip *chip)
172{
173 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
174 struct device *dev = chip->dev;
175 int wait_count = 0;
176 u32 cr;
177
178 writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
179 do {
180 usleep_range(200, 1000);
181 cr = readl(imx->mmio_base + MX3_PWMCR);
182 } while ((cr & MX3_PWMCR_SWR) &&
183 (wait_count++ < MX3_PWM_SWR_LOOP));
184
185 if (cr & MX3_PWMCR_SWR)
186 dev_warn(dev, "software reset timeout\n");
187}
188
189static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
190 struct pwm_device *pwm)
191{
192 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
193 struct device *dev = chip->dev;
194 unsigned int period_ms;
195 int fifoav;
196 u32 sr;
197
198 sr = readl(imx->mmio_base + MX3_PWMSR);
199 fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
200 if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
201 period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
202 NSEC_PER_MSEC);
203 msleep(period_ms);
204
205 sr = readl(imx->mmio_base + MX3_PWMSR);
206 if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr))
207 dev_warn(dev, "there is no free FIFO slot\n");
208 }
209}
210
211static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
212 const struct pwm_state *state)
213{
214 unsigned long period_cycles, duty_cycles, prescale;
215 struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
216 struct pwm_state cstate;
217 unsigned long long c;
218 int ret;
219 u32 cr;
220
221 pwm_get_state(pwm, &cstate);
222
223 if (state->enabled) {
224 c = clk_get_rate(imx->clk_per);
225 c *= state->period;
226
227 do_div(c, 1000000000);
228 period_cycles = c;
229
230 prescale = period_cycles / 0x10000 + 1;
231
232 period_cycles /= prescale;
233 c = (unsigned long long)period_cycles * state->duty_cycle;
234 do_div(c, state->period);
235 duty_cycles = c;
236
237 /*
238 * according to imx pwm RM, the real period value should be
239 * PERIOD value in PWMPR plus 2.
240 */
241 if (period_cycles > 2)
242 period_cycles -= 2;
243 else
244 period_cycles = 0;
245
246 /*
247 * Wait for a free FIFO slot if the PWM is already enabled, and
248 * flush the FIFO if the PWM was disabled and is about to be
249 * enabled.
250 */
251 if (cstate.enabled) {
252 pwm_imx27_wait_fifo_slot(chip, pwm);
253 } else {
254 ret = pwm_imx27_clk_prepare_enable(chip);
255 if (ret)
256 return ret;
257
258 pwm_imx27_sw_reset(chip);
259 }
260
261 writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
262 writel(period_cycles, imx->mmio_base + MX3_PWMPR);
263
264 cr = MX3_PWMCR_PRESCALER_SET(prescale) |
265 MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN |
266 FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) |
267 MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
268
269 if (state->polarity == PWM_POLARITY_INVERSED)
270 cr |= FIELD_PREP(MX3_PWMCR_POUTC,
271 MX3_PWMCR_POUTC_INVERTED);
272
273 writel(cr, imx->mmio_base + MX3_PWMCR);
274 } else if (cstate.enabled) {
275 writel(0, imx->mmio_base + MX3_PWMCR);
276
277 pwm_imx27_clk_disable_unprepare(chip);
278 }
279
280 return 0;
281}
282
283static const struct pwm_ops pwm_imx27_ops = {
284 .apply = pwm_imx27_apply,
285 .get_state = pwm_imx27_get_state,
286 .owner = THIS_MODULE,
287};
288
289static const struct of_device_id pwm_imx27_dt_ids[] = {
290 { .compatible = "fsl,imx27-pwm", },
291 { /* sentinel */ }
292};
293MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
294
295static int pwm_imx27_probe(struct platform_device *pdev)
296{
297 struct pwm_imx27_chip *imx;
298
299 imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
300 if (imx == NULL)
301 return -ENOMEM;
302
303 platform_set_drvdata(pdev, imx);
304
305 imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
306 if (IS_ERR(imx->clk_ipg)) {
307 dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
308 PTR_ERR(imx->clk_ipg));
309 return PTR_ERR(imx->clk_ipg);
310 }
311
312 imx->clk_per = devm_clk_get(&pdev->dev, "per");
313 if (IS_ERR(imx->clk_per)) {
314 int ret = PTR_ERR(imx->clk_per);
315
316 if (ret != -EPROBE_DEFER)
317 dev_err(&pdev->dev,
318 "failed to get peripheral clock: %d\n",
319 ret);
320
321 return ret;
322 }
323
324 imx->chip.ops = &pwm_imx27_ops;
325 imx->chip.dev = &pdev->dev;
326 imx->chip.base = -1;
327 imx->chip.npwm = 1;
328
329 imx->chip.of_xlate = of_pwm_xlate_with_flags;
330 imx->chip.of_pwm_n_cells = 3;
331
332 imx->mmio_base = devm_platform_ioremap_resource(pdev, 0);
333 if (IS_ERR(imx->mmio_base))
334 return PTR_ERR(imx->mmio_base);
335
336 return pwmchip_add(&imx->chip);
337}
338
339static int pwm_imx27_remove(struct platform_device *pdev)
340{
341 struct pwm_imx27_chip *imx;
342
343 imx = platform_get_drvdata(pdev);
344
345 pwm_imx27_clk_disable_unprepare(&imx->chip);
346
347 return pwmchip_remove(&imx->chip);
348}
349
350static struct platform_driver imx_pwm_driver = {
351 .driver = {
352 .name = "pwm-imx27",
353 .of_match_table = pwm_imx27_dt_ids,
354 },
355 .probe = pwm_imx27_probe,
356 .remove = pwm_imx27_remove,
357};
358module_platform_driver(imx_pwm_driver);
359
360MODULE_LICENSE("GPL v2");
361MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");