Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Driver for Atmel AT32 and AT91 SPI Controllers
4 *
5 * Copyright (C) 2006 Atmel Corporation
6 */
7
8#include <linux/kernel.h>
9#include <linux/clk.h>
10#include <linux/module.h>
11#include <linux/platform_device.h>
12#include <linux/delay.h>
13#include <linux/dma-mapping.h>
14#include <linux/dmaengine.h>
15#include <linux/err.h>
16#include <linux/interrupt.h>
17#include <linux/spi/spi.h>
18#include <linux/slab.h>
19#include <linux/of.h>
20
21#include <linux/io.h>
22#include <linux/gpio/consumer.h>
23#include <linux/pinctrl/consumer.h>
24#include <linux/pm_runtime.h>
25#include <trace/events/spi.h>
26
27/* SPI register offsets */
28#define SPI_CR 0x0000
29#define SPI_MR 0x0004
30#define SPI_RDR 0x0008
31#define SPI_TDR 0x000c
32#define SPI_SR 0x0010
33#define SPI_IER 0x0014
34#define SPI_IDR 0x0018
35#define SPI_IMR 0x001c
36#define SPI_CSR0 0x0030
37#define SPI_CSR1 0x0034
38#define SPI_CSR2 0x0038
39#define SPI_CSR3 0x003c
40#define SPI_FMR 0x0040
41#define SPI_FLR 0x0044
42#define SPI_VERSION 0x00fc
43#define SPI_RPR 0x0100
44#define SPI_RCR 0x0104
45#define SPI_TPR 0x0108
46#define SPI_TCR 0x010c
47#define SPI_RNPR 0x0110
48#define SPI_RNCR 0x0114
49#define SPI_TNPR 0x0118
50#define SPI_TNCR 0x011c
51#define SPI_PTCR 0x0120
52#define SPI_PTSR 0x0124
53
54/* Bitfields in CR */
55#define SPI_SPIEN_OFFSET 0
56#define SPI_SPIEN_SIZE 1
57#define SPI_SPIDIS_OFFSET 1
58#define SPI_SPIDIS_SIZE 1
59#define SPI_SWRST_OFFSET 7
60#define SPI_SWRST_SIZE 1
61#define SPI_LASTXFER_OFFSET 24
62#define SPI_LASTXFER_SIZE 1
63#define SPI_TXFCLR_OFFSET 16
64#define SPI_TXFCLR_SIZE 1
65#define SPI_RXFCLR_OFFSET 17
66#define SPI_RXFCLR_SIZE 1
67#define SPI_FIFOEN_OFFSET 30
68#define SPI_FIFOEN_SIZE 1
69#define SPI_FIFODIS_OFFSET 31
70#define SPI_FIFODIS_SIZE 1
71
72/* Bitfields in MR */
73#define SPI_MSTR_OFFSET 0
74#define SPI_MSTR_SIZE 1
75#define SPI_PS_OFFSET 1
76#define SPI_PS_SIZE 1
77#define SPI_PCSDEC_OFFSET 2
78#define SPI_PCSDEC_SIZE 1
79#define SPI_FDIV_OFFSET 3
80#define SPI_FDIV_SIZE 1
81#define SPI_MODFDIS_OFFSET 4
82#define SPI_MODFDIS_SIZE 1
83#define SPI_WDRBT_OFFSET 5
84#define SPI_WDRBT_SIZE 1
85#define SPI_LLB_OFFSET 7
86#define SPI_LLB_SIZE 1
87#define SPI_PCS_OFFSET 16
88#define SPI_PCS_SIZE 4
89#define SPI_DLYBCS_OFFSET 24
90#define SPI_DLYBCS_SIZE 8
91
92/* Bitfields in RDR */
93#define SPI_RD_OFFSET 0
94#define SPI_RD_SIZE 16
95
96/* Bitfields in TDR */
97#define SPI_TD_OFFSET 0
98#define SPI_TD_SIZE 16
99
100/* Bitfields in SR */
101#define SPI_RDRF_OFFSET 0
102#define SPI_RDRF_SIZE 1
103#define SPI_TDRE_OFFSET 1
104#define SPI_TDRE_SIZE 1
105#define SPI_MODF_OFFSET 2
106#define SPI_MODF_SIZE 1
107#define SPI_OVRES_OFFSET 3
108#define SPI_OVRES_SIZE 1
109#define SPI_ENDRX_OFFSET 4
110#define SPI_ENDRX_SIZE 1
111#define SPI_ENDTX_OFFSET 5
112#define SPI_ENDTX_SIZE 1
113#define SPI_RXBUFF_OFFSET 6
114#define SPI_RXBUFF_SIZE 1
115#define SPI_TXBUFE_OFFSET 7
116#define SPI_TXBUFE_SIZE 1
117#define SPI_NSSR_OFFSET 8
118#define SPI_NSSR_SIZE 1
119#define SPI_TXEMPTY_OFFSET 9
120#define SPI_TXEMPTY_SIZE 1
121#define SPI_SPIENS_OFFSET 16
122#define SPI_SPIENS_SIZE 1
123#define SPI_TXFEF_OFFSET 24
124#define SPI_TXFEF_SIZE 1
125#define SPI_TXFFF_OFFSET 25
126#define SPI_TXFFF_SIZE 1
127#define SPI_TXFTHF_OFFSET 26
128#define SPI_TXFTHF_SIZE 1
129#define SPI_RXFEF_OFFSET 27
130#define SPI_RXFEF_SIZE 1
131#define SPI_RXFFF_OFFSET 28
132#define SPI_RXFFF_SIZE 1
133#define SPI_RXFTHF_OFFSET 29
134#define SPI_RXFTHF_SIZE 1
135#define SPI_TXFPTEF_OFFSET 30
136#define SPI_TXFPTEF_SIZE 1
137#define SPI_RXFPTEF_OFFSET 31
138#define SPI_RXFPTEF_SIZE 1
139
140/* Bitfields in CSR0 */
141#define SPI_CPOL_OFFSET 0
142#define SPI_CPOL_SIZE 1
143#define SPI_NCPHA_OFFSET 1
144#define SPI_NCPHA_SIZE 1
145#define SPI_CSAAT_OFFSET 3
146#define SPI_CSAAT_SIZE 1
147#define SPI_BITS_OFFSET 4
148#define SPI_BITS_SIZE 4
149#define SPI_SCBR_OFFSET 8
150#define SPI_SCBR_SIZE 8
151#define SPI_DLYBS_OFFSET 16
152#define SPI_DLYBS_SIZE 8
153#define SPI_DLYBCT_OFFSET 24
154#define SPI_DLYBCT_SIZE 8
155
156/* Bitfields in RCR */
157#define SPI_RXCTR_OFFSET 0
158#define SPI_RXCTR_SIZE 16
159
160/* Bitfields in TCR */
161#define SPI_TXCTR_OFFSET 0
162#define SPI_TXCTR_SIZE 16
163
164/* Bitfields in RNCR */
165#define SPI_RXNCR_OFFSET 0
166#define SPI_RXNCR_SIZE 16
167
168/* Bitfields in TNCR */
169#define SPI_TXNCR_OFFSET 0
170#define SPI_TXNCR_SIZE 16
171
172/* Bitfields in PTCR */
173#define SPI_RXTEN_OFFSET 0
174#define SPI_RXTEN_SIZE 1
175#define SPI_RXTDIS_OFFSET 1
176#define SPI_RXTDIS_SIZE 1
177#define SPI_TXTEN_OFFSET 8
178#define SPI_TXTEN_SIZE 1
179#define SPI_TXTDIS_OFFSET 9
180#define SPI_TXTDIS_SIZE 1
181
182/* Bitfields in FMR */
183#define SPI_TXRDYM_OFFSET 0
184#define SPI_TXRDYM_SIZE 2
185#define SPI_RXRDYM_OFFSET 4
186#define SPI_RXRDYM_SIZE 2
187#define SPI_TXFTHRES_OFFSET 16
188#define SPI_TXFTHRES_SIZE 6
189#define SPI_RXFTHRES_OFFSET 24
190#define SPI_RXFTHRES_SIZE 6
191
192/* Bitfields in FLR */
193#define SPI_TXFL_OFFSET 0
194#define SPI_TXFL_SIZE 6
195#define SPI_RXFL_OFFSET 16
196#define SPI_RXFL_SIZE 6
197
198/* Constants for BITS */
199#define SPI_BITS_8_BPT 0
200#define SPI_BITS_9_BPT 1
201#define SPI_BITS_10_BPT 2
202#define SPI_BITS_11_BPT 3
203#define SPI_BITS_12_BPT 4
204#define SPI_BITS_13_BPT 5
205#define SPI_BITS_14_BPT 6
206#define SPI_BITS_15_BPT 7
207#define SPI_BITS_16_BPT 8
208#define SPI_ONE_DATA 0
209#define SPI_TWO_DATA 1
210#define SPI_FOUR_DATA 2
211
212/* Bit manipulation macros */
213#define SPI_BIT(name) \
214 (1 << SPI_##name##_OFFSET)
215#define SPI_BF(name, value) \
216 (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
217#define SPI_BFEXT(name, value) \
218 (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
219#define SPI_BFINS(name, value, old) \
220 (((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
221 | SPI_BF(name, value))
222
223/* Register access macros */
224#define spi_readl(port, reg) \
225 readl_relaxed((port)->regs + SPI_##reg)
226#define spi_writel(port, reg, value) \
227 writel_relaxed((value), (port)->regs + SPI_##reg)
228#define spi_writew(port, reg, value) \
229 writew_relaxed((value), (port)->regs + SPI_##reg)
230
231/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
232 * cache operations; better heuristics consider wordsize and bitrate.
233 */
234#define DMA_MIN_BYTES 16
235
236#define SPI_DMA_TIMEOUT (msecs_to_jiffies(1000))
237
238#define AUTOSUSPEND_TIMEOUT 2000
239
240struct atmel_spi_caps {
241 bool is_spi2;
242 bool has_wdrbt;
243 bool has_dma_support;
244 bool has_pdc_support;
245};
246
247/*
248 * The core SPI transfer engine just talks to a register bank to set up
249 * DMA transfers; transfer queue progress is driven by IRQs. The clock
250 * framework provides the base clock, subdivided for each spi_device.
251 */
252struct atmel_spi {
253 spinlock_t lock;
254 unsigned long flags;
255
256 phys_addr_t phybase;
257 void __iomem *regs;
258 int irq;
259 struct clk *clk;
260 struct platform_device *pdev;
261 unsigned long spi_clk;
262
263 struct spi_transfer *current_transfer;
264 int current_remaining_bytes;
265 int done_status;
266 dma_addr_t dma_addr_rx_bbuf;
267 dma_addr_t dma_addr_tx_bbuf;
268 void *addr_rx_bbuf;
269 void *addr_tx_bbuf;
270
271 struct completion xfer_completion;
272
273 struct atmel_spi_caps caps;
274
275 bool use_dma;
276 bool use_pdc;
277
278 bool keep_cs;
279
280 u32 fifo_size;
281 u8 native_cs_free;
282 u8 native_cs_for_gpio;
283};
284
285/* Controller-specific per-slave state */
286struct atmel_spi_device {
287 u32 csr;
288};
289
290#define SPI_MAX_DMA_XFER 65535 /* true for both PDC and DMA */
291#define INVALID_DMA_ADDRESS 0xffffffff
292
293/*
294 * Version 2 of the SPI controller has
295 * - CR.LASTXFER
296 * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
297 * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
298 * - SPI_CSRx.CSAAT
299 * - SPI_CSRx.SBCR allows faster clocking
300 */
301static bool atmel_spi_is_v2(struct atmel_spi *as)
302{
303 return as->caps.is_spi2;
304}
305
306/*
307 * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
308 * they assume that spi slave device state will not change on deselect, so
309 * that automagic deselection is OK. ("NPCSx rises if no data is to be
310 * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
311 * controllers have CSAAT and friends.
312 *
313 * Even controller newer than ar91rm9200, using GPIOs can make sens as
314 * it lets us support active-high chipselects despite the controller's
315 * belief that only active-low devices/systems exists.
316 *
317 * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
318 * right when driven with GPIO. ("Mode Fault does not allow more than one
319 * Master on Chip Select 0.") No workaround exists for that ... so for
320 * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
321 * and (c) will trigger that first erratum in some cases.
322 */
323
324static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
325{
326 struct atmel_spi_device *asd = spi->controller_state;
327 int chip_select;
328 u32 mr;
329
330 if (spi->cs_gpiod)
331 chip_select = as->native_cs_for_gpio;
332 else
333 chip_select = spi->chip_select;
334
335 if (atmel_spi_is_v2(as)) {
336 spi_writel(as, CSR0 + 4 * chip_select, asd->csr);
337 /* For the low SPI version, there is a issue that PDC transfer
338 * on CS1,2,3 needs SPI_CSR0.BITS config as SPI_CSR1,2,3.BITS
339 */
340 spi_writel(as, CSR0, asd->csr);
341 if (as->caps.has_wdrbt) {
342 spi_writel(as, MR,
343 SPI_BF(PCS, ~(0x01 << chip_select))
344 | SPI_BIT(WDRBT)
345 | SPI_BIT(MODFDIS)
346 | SPI_BIT(MSTR));
347 } else {
348 spi_writel(as, MR,
349 SPI_BF(PCS, ~(0x01 << chip_select))
350 | SPI_BIT(MODFDIS)
351 | SPI_BIT(MSTR));
352 }
353
354 mr = spi_readl(as, MR);
355 } else {
356 u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
357 int i;
358 u32 csr;
359
360 /* Make sure clock polarity is correct */
361 for (i = 0; i < spi->master->num_chipselect; i++) {
362 csr = spi_readl(as, CSR0 + 4 * i);
363 if ((csr ^ cpol) & SPI_BIT(CPOL))
364 spi_writel(as, CSR0 + 4 * i,
365 csr ^ SPI_BIT(CPOL));
366 }
367
368 mr = spi_readl(as, MR);
369 mr = SPI_BFINS(PCS, ~(1 << chip_select), mr);
370 spi_writel(as, MR, mr);
371 }
372
373 dev_dbg(&spi->dev, "activate NPCS, mr %08x\n", mr);
374}
375
376static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
377{
378 int chip_select;
379 u32 mr;
380
381 if (spi->cs_gpiod)
382 chip_select = as->native_cs_for_gpio;
383 else
384 chip_select = spi->chip_select;
385
386 /* only deactivate *this* device; sometimes transfers to
387 * another device may be active when this routine is called.
388 */
389 mr = spi_readl(as, MR);
390 if (~SPI_BFEXT(PCS, mr) & (1 << chip_select)) {
391 mr = SPI_BFINS(PCS, 0xf, mr);
392 spi_writel(as, MR, mr);
393 }
394
395 dev_dbg(&spi->dev, "DEactivate NPCS, mr %08x\n", mr);
396
397 if (!spi->cs_gpiod)
398 spi_writel(as, CR, SPI_BIT(LASTXFER));
399}
400
401static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock)
402{
403 spin_lock_irqsave(&as->lock, as->flags);
404}
405
406static void atmel_spi_unlock(struct atmel_spi *as) __releases(&as->lock)
407{
408 spin_unlock_irqrestore(&as->lock, as->flags);
409}
410
411static inline bool atmel_spi_is_vmalloc_xfer(struct spi_transfer *xfer)
412{
413 return is_vmalloc_addr(xfer->tx_buf) || is_vmalloc_addr(xfer->rx_buf);
414}
415
416static inline bool atmel_spi_use_dma(struct atmel_spi *as,
417 struct spi_transfer *xfer)
418{
419 return as->use_dma && xfer->len >= DMA_MIN_BYTES;
420}
421
422static bool atmel_spi_can_dma(struct spi_master *master,
423 struct spi_device *spi,
424 struct spi_transfer *xfer)
425{
426 struct atmel_spi *as = spi_master_get_devdata(master);
427
428 if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5))
429 return atmel_spi_use_dma(as, xfer) &&
430 !atmel_spi_is_vmalloc_xfer(xfer);
431 else
432 return atmel_spi_use_dma(as, xfer);
433
434}
435
436static int atmel_spi_dma_slave_config(struct atmel_spi *as, u8 bits_per_word)
437{
438 struct spi_master *master = platform_get_drvdata(as->pdev);
439 struct dma_slave_config slave_config;
440 int err = 0;
441
442 if (bits_per_word > 8) {
443 slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
444 slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
445 } else {
446 slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
447 slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
448 }
449
450 slave_config.dst_addr = (dma_addr_t)as->phybase + SPI_TDR;
451 slave_config.src_addr = (dma_addr_t)as->phybase + SPI_RDR;
452 slave_config.src_maxburst = 1;
453 slave_config.dst_maxburst = 1;
454 slave_config.device_fc = false;
455
456 /*
457 * This driver uses fixed peripheral select mode (PS bit set to '0' in
458 * the Mode Register).
459 * So according to the datasheet, when FIFOs are available (and
460 * enabled), the Transmit FIFO operates in Multiple Data Mode.
461 * In this mode, up to 2 data, not 4, can be written into the Transmit
462 * Data Register in a single access.
463 * However, the first data has to be written into the lowest 16 bits and
464 * the second data into the highest 16 bits of the Transmit
465 * Data Register. For 8bit data (the most frequent case), it would
466 * require to rework tx_buf so each data would actually fit 16 bits.
467 * So we'd rather write only one data at the time. Hence the transmit
468 * path works the same whether FIFOs are available (and enabled) or not.
469 */
470 if (dmaengine_slave_config(master->dma_tx, &slave_config)) {
471 dev_err(&as->pdev->dev,
472 "failed to configure tx dma channel\n");
473 err = -EINVAL;
474 }
475
476 /*
477 * This driver configures the spi controller for master mode (MSTR bit
478 * set to '1' in the Mode Register).
479 * So according to the datasheet, when FIFOs are available (and
480 * enabled), the Receive FIFO operates in Single Data Mode.
481 * So the receive path works the same whether FIFOs are available (and
482 * enabled) or not.
483 */
484 if (dmaengine_slave_config(master->dma_rx, &slave_config)) {
485 dev_err(&as->pdev->dev,
486 "failed to configure rx dma channel\n");
487 err = -EINVAL;
488 }
489
490 return err;
491}
492
493static int atmel_spi_configure_dma(struct spi_master *master,
494 struct atmel_spi *as)
495{
496 struct device *dev = &as->pdev->dev;
497 int err;
498
499 master->dma_tx = dma_request_chan(dev, "tx");
500 if (IS_ERR(master->dma_tx)) {
501 err = PTR_ERR(master->dma_tx);
502 dev_dbg(dev, "No TX DMA channel, DMA is disabled\n");
503 goto error_clear;
504 }
505
506 master->dma_rx = dma_request_chan(dev, "rx");
507 if (IS_ERR(master->dma_rx)) {
508 err = PTR_ERR(master->dma_rx);
509 /*
510 * No reason to check EPROBE_DEFER here since we have already
511 * requested tx channel.
512 */
513 dev_dbg(dev, "No RX DMA channel, DMA is disabled\n");
514 goto error;
515 }
516
517 err = atmel_spi_dma_slave_config(as, 8);
518 if (err)
519 goto error;
520
521 dev_info(&as->pdev->dev,
522 "Using %s (tx) and %s (rx) for DMA transfers\n",
523 dma_chan_name(master->dma_tx),
524 dma_chan_name(master->dma_rx));
525
526 return 0;
527error:
528 if (!IS_ERR(master->dma_rx))
529 dma_release_channel(master->dma_rx);
530 if (!IS_ERR(master->dma_tx))
531 dma_release_channel(master->dma_tx);
532error_clear:
533 master->dma_tx = master->dma_rx = NULL;
534 return err;
535}
536
537static void atmel_spi_stop_dma(struct spi_master *master)
538{
539 if (master->dma_rx)
540 dmaengine_terminate_all(master->dma_rx);
541 if (master->dma_tx)
542 dmaengine_terminate_all(master->dma_tx);
543}
544
545static void atmel_spi_release_dma(struct spi_master *master)
546{
547 if (master->dma_rx) {
548 dma_release_channel(master->dma_rx);
549 master->dma_rx = NULL;
550 }
551 if (master->dma_tx) {
552 dma_release_channel(master->dma_tx);
553 master->dma_tx = NULL;
554 }
555}
556
557/* This function is called by the DMA driver from tasklet context */
558static void dma_callback(void *data)
559{
560 struct spi_master *master = data;
561 struct atmel_spi *as = spi_master_get_devdata(master);
562
563 if (is_vmalloc_addr(as->current_transfer->rx_buf) &&
564 IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
565 memcpy(as->current_transfer->rx_buf, as->addr_rx_bbuf,
566 as->current_transfer->len);
567 }
568 complete(&as->xfer_completion);
569}
570
571/*
572 * Next transfer using PIO without FIFO.
573 */
574static void atmel_spi_next_xfer_single(struct spi_master *master,
575 struct spi_transfer *xfer)
576{
577 struct atmel_spi *as = spi_master_get_devdata(master);
578 unsigned long xfer_pos = xfer->len - as->current_remaining_bytes;
579
580 dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_pio\n");
581
582 /* Make sure data is not remaining in RDR */
583 spi_readl(as, RDR);
584 while (spi_readl(as, SR) & SPI_BIT(RDRF)) {
585 spi_readl(as, RDR);
586 cpu_relax();
587 }
588
589 if (xfer->bits_per_word > 8)
590 spi_writel(as, TDR, *(u16 *)(xfer->tx_buf + xfer_pos));
591 else
592 spi_writel(as, TDR, *(u8 *)(xfer->tx_buf + xfer_pos));
593
594 dev_dbg(master->dev.parent,
595 " start pio xfer %p: len %u tx %p rx %p bitpw %d\n",
596 xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
597 xfer->bits_per_word);
598
599 /* Enable relevant interrupts */
600 spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES));
601}
602
603/*
604 * Next transfer using PIO with FIFO.
605 */
606static void atmel_spi_next_xfer_fifo(struct spi_master *master,
607 struct spi_transfer *xfer)
608{
609 struct atmel_spi *as = spi_master_get_devdata(master);
610 u32 current_remaining_data, num_data;
611 u32 offset = xfer->len - as->current_remaining_bytes;
612 const u16 *words = (const u16 *)((u8 *)xfer->tx_buf + offset);
613 const u8 *bytes = (const u8 *)((u8 *)xfer->tx_buf + offset);
614 u16 td0, td1;
615 u32 fifomr;
616
617 dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_fifo\n");
618
619 /* Compute the number of data to transfer in the current iteration */
620 current_remaining_data = ((xfer->bits_per_word > 8) ?
621 ((u32)as->current_remaining_bytes >> 1) :
622 (u32)as->current_remaining_bytes);
623 num_data = min(current_remaining_data, as->fifo_size);
624
625 /* Flush RX and TX FIFOs */
626 spi_writel(as, CR, SPI_BIT(RXFCLR) | SPI_BIT(TXFCLR));
627 while (spi_readl(as, FLR))
628 cpu_relax();
629
630 /* Set RX FIFO Threshold to the number of data to transfer */
631 fifomr = spi_readl(as, FMR);
632 spi_writel(as, FMR, SPI_BFINS(RXFTHRES, num_data, fifomr));
633
634 /* Clear FIFO flags in the Status Register, especially RXFTHF */
635 (void)spi_readl(as, SR);
636
637 /* Fill TX FIFO */
638 while (num_data >= 2) {
639 if (xfer->bits_per_word > 8) {
640 td0 = *words++;
641 td1 = *words++;
642 } else {
643 td0 = *bytes++;
644 td1 = *bytes++;
645 }
646
647 spi_writel(as, TDR, (td1 << 16) | td0);
648 num_data -= 2;
649 }
650
651 if (num_data) {
652 if (xfer->bits_per_word > 8)
653 td0 = *words++;
654 else
655 td0 = *bytes++;
656
657 spi_writew(as, TDR, td0);
658 num_data--;
659 }
660
661 dev_dbg(master->dev.parent,
662 " start fifo xfer %p: len %u tx %p rx %p bitpw %d\n",
663 xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
664 xfer->bits_per_word);
665
666 /*
667 * Enable RX FIFO Threshold Flag interrupt to be notified about
668 * transfer completion.
669 */
670 spi_writel(as, IER, SPI_BIT(RXFTHF) | SPI_BIT(OVRES));
671}
672
673/*
674 * Next transfer using PIO.
675 */
676static void atmel_spi_next_xfer_pio(struct spi_master *master,
677 struct spi_transfer *xfer)
678{
679 struct atmel_spi *as = spi_master_get_devdata(master);
680
681 if (as->fifo_size)
682 atmel_spi_next_xfer_fifo(master, xfer);
683 else
684 atmel_spi_next_xfer_single(master, xfer);
685}
686
687/*
688 * Submit next transfer for DMA.
689 */
690static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
691 struct spi_transfer *xfer,
692 u32 *plen)
693{
694 struct atmel_spi *as = spi_master_get_devdata(master);
695 struct dma_chan *rxchan = master->dma_rx;
696 struct dma_chan *txchan = master->dma_tx;
697 struct dma_async_tx_descriptor *rxdesc;
698 struct dma_async_tx_descriptor *txdesc;
699 dma_cookie_t cookie;
700
701 dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_dma_submit\n");
702
703 /* Check that the channels are available */
704 if (!rxchan || !txchan)
705 return -ENODEV;
706
707
708 *plen = xfer->len;
709
710 if (atmel_spi_dma_slave_config(as, xfer->bits_per_word))
711 goto err_exit;
712
713 /* Send both scatterlists */
714 if (atmel_spi_is_vmalloc_xfer(xfer) &&
715 IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
716 rxdesc = dmaengine_prep_slave_single(rxchan,
717 as->dma_addr_rx_bbuf,
718 xfer->len,
719 DMA_DEV_TO_MEM,
720 DMA_PREP_INTERRUPT |
721 DMA_CTRL_ACK);
722 } else {
723 rxdesc = dmaengine_prep_slave_sg(rxchan,
724 xfer->rx_sg.sgl,
725 xfer->rx_sg.nents,
726 DMA_DEV_TO_MEM,
727 DMA_PREP_INTERRUPT |
728 DMA_CTRL_ACK);
729 }
730 if (!rxdesc)
731 goto err_dma;
732
733 if (atmel_spi_is_vmalloc_xfer(xfer) &&
734 IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
735 memcpy(as->addr_tx_bbuf, xfer->tx_buf, xfer->len);
736 txdesc = dmaengine_prep_slave_single(txchan,
737 as->dma_addr_tx_bbuf,
738 xfer->len, DMA_MEM_TO_DEV,
739 DMA_PREP_INTERRUPT |
740 DMA_CTRL_ACK);
741 } else {
742 txdesc = dmaengine_prep_slave_sg(txchan,
743 xfer->tx_sg.sgl,
744 xfer->tx_sg.nents,
745 DMA_MEM_TO_DEV,
746 DMA_PREP_INTERRUPT |
747 DMA_CTRL_ACK);
748 }
749 if (!txdesc)
750 goto err_dma;
751
752 dev_dbg(master->dev.parent,
753 " start dma xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
754 xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma,
755 xfer->rx_buf, (unsigned long long)xfer->rx_dma);
756
757 /* Enable relevant interrupts */
758 spi_writel(as, IER, SPI_BIT(OVRES));
759
760 /* Put the callback on the RX transfer only, that should finish last */
761 rxdesc->callback = dma_callback;
762 rxdesc->callback_param = master;
763
764 /* Submit and fire RX and TX with TX last so we're ready to read! */
765 cookie = rxdesc->tx_submit(rxdesc);
766 if (dma_submit_error(cookie))
767 goto err_dma;
768 cookie = txdesc->tx_submit(txdesc);
769 if (dma_submit_error(cookie))
770 goto err_dma;
771 rxchan->device->device_issue_pending(rxchan);
772 txchan->device->device_issue_pending(txchan);
773
774 return 0;
775
776err_dma:
777 spi_writel(as, IDR, SPI_BIT(OVRES));
778 atmel_spi_stop_dma(master);
779err_exit:
780 return -ENOMEM;
781}
782
783static void atmel_spi_next_xfer_data(struct spi_master *master,
784 struct spi_transfer *xfer,
785 dma_addr_t *tx_dma,
786 dma_addr_t *rx_dma,
787 u32 *plen)
788{
789 *rx_dma = xfer->rx_dma + xfer->len - *plen;
790 *tx_dma = xfer->tx_dma + xfer->len - *plen;
791 if (*plen > master->max_dma_len)
792 *plen = master->max_dma_len;
793}
794
795static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
796 struct spi_device *spi,
797 struct spi_transfer *xfer)
798{
799 u32 scbr, csr;
800 unsigned long bus_hz;
801 int chip_select;
802
803 if (spi->cs_gpiod)
804 chip_select = as->native_cs_for_gpio;
805 else
806 chip_select = spi->chip_select;
807
808 /* v1 chips start out at half the peripheral bus speed. */
809 bus_hz = as->spi_clk;
810 if (!atmel_spi_is_v2(as))
811 bus_hz /= 2;
812
813 /*
814 * Calculate the lowest divider that satisfies the
815 * constraint, assuming div32/fdiv/mbz == 0.
816 */
817 scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz);
818
819 /*
820 * If the resulting divider doesn't fit into the
821 * register bitfield, we can't satisfy the constraint.
822 */
823 if (scbr >= (1 << SPI_SCBR_SIZE)) {
824 dev_err(&spi->dev,
825 "setup: %d Hz too slow, scbr %u; min %ld Hz\n",
826 xfer->speed_hz, scbr, bus_hz/255);
827 return -EINVAL;
828 }
829 if (scbr == 0) {
830 dev_err(&spi->dev,
831 "setup: %d Hz too high, scbr %u; max %ld Hz\n",
832 xfer->speed_hz, scbr, bus_hz);
833 return -EINVAL;
834 }
835 csr = spi_readl(as, CSR0 + 4 * chip_select);
836 csr = SPI_BFINS(SCBR, scbr, csr);
837 spi_writel(as, CSR0 + 4 * chip_select, csr);
838 xfer->effective_speed_hz = bus_hz / scbr;
839
840 return 0;
841}
842
843/*
844 * Submit next transfer for PDC.
845 * lock is held, spi irq is blocked
846 */
847static void atmel_spi_pdc_next_xfer(struct spi_master *master,
848 struct spi_transfer *xfer)
849{
850 struct atmel_spi *as = spi_master_get_devdata(master);
851 u32 len;
852 dma_addr_t tx_dma, rx_dma;
853
854 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
855
856 len = as->current_remaining_bytes;
857 atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
858 as->current_remaining_bytes -= len;
859
860 spi_writel(as, RPR, rx_dma);
861 spi_writel(as, TPR, tx_dma);
862
863 if (xfer->bits_per_word > 8)
864 len >>= 1;
865 spi_writel(as, RCR, len);
866 spi_writel(as, TCR, len);
867
868 dev_dbg(&master->dev,
869 " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
870 xfer, xfer->len, xfer->tx_buf,
871 (unsigned long long)xfer->tx_dma, xfer->rx_buf,
872 (unsigned long long)xfer->rx_dma);
873
874 if (as->current_remaining_bytes) {
875 len = as->current_remaining_bytes;
876 atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
877 as->current_remaining_bytes -= len;
878
879 spi_writel(as, RNPR, rx_dma);
880 spi_writel(as, TNPR, tx_dma);
881
882 if (xfer->bits_per_word > 8)
883 len >>= 1;
884 spi_writel(as, RNCR, len);
885 spi_writel(as, TNCR, len);
886
887 dev_dbg(&master->dev,
888 " next xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
889 xfer, xfer->len, xfer->tx_buf,
890 (unsigned long long)xfer->tx_dma, xfer->rx_buf,
891 (unsigned long long)xfer->rx_dma);
892 }
893
894 /* REVISIT: We're waiting for RXBUFF before we start the next
895 * transfer because we need to handle some difficult timing
896 * issues otherwise. If we wait for TXBUFE in one transfer and
897 * then starts waiting for RXBUFF in the next, it's difficult
898 * to tell the difference between the RXBUFF interrupt we're
899 * actually waiting for and the RXBUFF interrupt of the
900 * previous transfer.
901 *
902 * It should be doable, though. Just not now...
903 */
904 spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
905 spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
906}
907
908/*
909 * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
910 * - The buffer is either valid for CPU access, else NULL
911 * - If the buffer is valid, so is its DMA address
912 *
913 * This driver manages the dma address unless message->is_dma_mapped.
914 */
915static int
916atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
917{
918 struct device *dev = &as->pdev->dev;
919
920 xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
921 if (xfer->tx_buf) {
922 /* tx_buf is a const void* where we need a void * for the dma
923 * mapping */
924 void *nonconst_tx = (void *)xfer->tx_buf;
925
926 xfer->tx_dma = dma_map_single(dev,
927 nonconst_tx, xfer->len,
928 DMA_TO_DEVICE);
929 if (dma_mapping_error(dev, xfer->tx_dma))
930 return -ENOMEM;
931 }
932 if (xfer->rx_buf) {
933 xfer->rx_dma = dma_map_single(dev,
934 xfer->rx_buf, xfer->len,
935 DMA_FROM_DEVICE);
936 if (dma_mapping_error(dev, xfer->rx_dma)) {
937 if (xfer->tx_buf)
938 dma_unmap_single(dev,
939 xfer->tx_dma, xfer->len,
940 DMA_TO_DEVICE);
941 return -ENOMEM;
942 }
943 }
944 return 0;
945}
946
947static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
948 struct spi_transfer *xfer)
949{
950 if (xfer->tx_dma != INVALID_DMA_ADDRESS)
951 dma_unmap_single(master->dev.parent, xfer->tx_dma,
952 xfer->len, DMA_TO_DEVICE);
953 if (xfer->rx_dma != INVALID_DMA_ADDRESS)
954 dma_unmap_single(master->dev.parent, xfer->rx_dma,
955 xfer->len, DMA_FROM_DEVICE);
956}
957
958static void atmel_spi_disable_pdc_transfer(struct atmel_spi *as)
959{
960 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
961}
962
963static void
964atmel_spi_pump_single_data(struct atmel_spi *as, struct spi_transfer *xfer)
965{
966 u8 *rxp;
967 u16 *rxp16;
968 unsigned long xfer_pos = xfer->len - as->current_remaining_bytes;
969
970 if (xfer->bits_per_word > 8) {
971 rxp16 = (u16 *)(((u8 *)xfer->rx_buf) + xfer_pos);
972 *rxp16 = spi_readl(as, RDR);
973 } else {
974 rxp = ((u8 *)xfer->rx_buf) + xfer_pos;
975 *rxp = spi_readl(as, RDR);
976 }
977 if (xfer->bits_per_word > 8) {
978 if (as->current_remaining_bytes > 2)
979 as->current_remaining_bytes -= 2;
980 else
981 as->current_remaining_bytes = 0;
982 } else {
983 as->current_remaining_bytes--;
984 }
985}
986
987static void
988atmel_spi_pump_fifo_data(struct atmel_spi *as, struct spi_transfer *xfer)
989{
990 u32 fifolr = spi_readl(as, FLR);
991 u32 num_bytes, num_data = SPI_BFEXT(RXFL, fifolr);
992 u32 offset = xfer->len - as->current_remaining_bytes;
993 u16 *words = (u16 *)((u8 *)xfer->rx_buf + offset);
994 u8 *bytes = (u8 *)((u8 *)xfer->rx_buf + offset);
995 u16 rd; /* RD field is the lowest 16 bits of RDR */
996
997 /* Update the number of remaining bytes to transfer */
998 num_bytes = ((xfer->bits_per_word > 8) ?
999 (num_data << 1) :
1000 num_data);
1001
1002 if (as->current_remaining_bytes > num_bytes)
1003 as->current_remaining_bytes -= num_bytes;
1004 else
1005 as->current_remaining_bytes = 0;
1006
1007 /* Handle odd number of bytes when data are more than 8bit width */
1008 if (xfer->bits_per_word > 8)
1009 as->current_remaining_bytes &= ~0x1;
1010
1011 /* Read data */
1012 while (num_data) {
1013 rd = spi_readl(as, RDR);
1014 if (xfer->bits_per_word > 8)
1015 *words++ = rd;
1016 else
1017 *bytes++ = rd;
1018 num_data--;
1019 }
1020}
1021
1022/* Called from IRQ
1023 *
1024 * Must update "current_remaining_bytes" to keep track of data
1025 * to transfer.
1026 */
1027static void
1028atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
1029{
1030 if (as->fifo_size)
1031 atmel_spi_pump_fifo_data(as, xfer);
1032 else
1033 atmel_spi_pump_single_data(as, xfer);
1034}
1035
1036/* Interrupt
1037 *
1038 */
1039static irqreturn_t
1040atmel_spi_pio_interrupt(int irq, void *dev_id)
1041{
1042 struct spi_master *master = dev_id;
1043 struct atmel_spi *as = spi_master_get_devdata(master);
1044 u32 status, pending, imr;
1045 struct spi_transfer *xfer;
1046 int ret = IRQ_NONE;
1047
1048 imr = spi_readl(as, IMR);
1049 status = spi_readl(as, SR);
1050 pending = status & imr;
1051
1052 if (pending & SPI_BIT(OVRES)) {
1053 ret = IRQ_HANDLED;
1054 spi_writel(as, IDR, SPI_BIT(OVRES));
1055 dev_warn(master->dev.parent, "overrun\n");
1056
1057 /*
1058 * When we get an overrun, we disregard the current
1059 * transfer. Data will not be copied back from any
1060 * bounce buffer and msg->actual_len will not be
1061 * updated with the last xfer.
1062 *
1063 * We will also not process any remaning transfers in
1064 * the message.
1065 */
1066 as->done_status = -EIO;
1067 smp_wmb();
1068
1069 /* Clear any overrun happening while cleaning up */
1070 spi_readl(as, SR);
1071
1072 complete(&as->xfer_completion);
1073
1074 } else if (pending & (SPI_BIT(RDRF) | SPI_BIT(RXFTHF))) {
1075 atmel_spi_lock(as);
1076
1077 if (as->current_remaining_bytes) {
1078 ret = IRQ_HANDLED;
1079 xfer = as->current_transfer;
1080 atmel_spi_pump_pio_data(as, xfer);
1081 if (!as->current_remaining_bytes)
1082 spi_writel(as, IDR, pending);
1083
1084 complete(&as->xfer_completion);
1085 }
1086
1087 atmel_spi_unlock(as);
1088 } else {
1089 WARN_ONCE(pending, "IRQ not handled, pending = %x\n", pending);
1090 ret = IRQ_HANDLED;
1091 spi_writel(as, IDR, pending);
1092 }
1093
1094 return ret;
1095}
1096
1097static irqreturn_t
1098atmel_spi_pdc_interrupt(int irq, void *dev_id)
1099{
1100 struct spi_master *master = dev_id;
1101 struct atmel_spi *as = spi_master_get_devdata(master);
1102 u32 status, pending, imr;
1103 int ret = IRQ_NONE;
1104
1105 imr = spi_readl(as, IMR);
1106 status = spi_readl(as, SR);
1107 pending = status & imr;
1108
1109 if (pending & SPI_BIT(OVRES)) {
1110
1111 ret = IRQ_HANDLED;
1112
1113 spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
1114 | SPI_BIT(OVRES)));
1115
1116 /* Clear any overrun happening while cleaning up */
1117 spi_readl(as, SR);
1118
1119 as->done_status = -EIO;
1120
1121 complete(&as->xfer_completion);
1122
1123 } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
1124 ret = IRQ_HANDLED;
1125
1126 spi_writel(as, IDR, pending);
1127
1128 complete(&as->xfer_completion);
1129 }
1130
1131 return ret;
1132}
1133
1134static int atmel_word_delay_csr(struct spi_device *spi, struct atmel_spi *as)
1135{
1136 struct spi_delay *delay = &spi->word_delay;
1137 u32 value = delay->value;
1138
1139 switch (delay->unit) {
1140 case SPI_DELAY_UNIT_NSECS:
1141 value /= 1000;
1142 break;
1143 case SPI_DELAY_UNIT_USECS:
1144 break;
1145 default:
1146 return -EINVAL;
1147 }
1148
1149 return (as->spi_clk / 1000000 * value) >> 5;
1150}
1151
1152static void initialize_native_cs_for_gpio(struct atmel_spi *as)
1153{
1154 int i;
1155 struct spi_master *master = platform_get_drvdata(as->pdev);
1156
1157 if (!as->native_cs_free)
1158 return; /* already initialized */
1159
1160 if (!master->cs_gpiods)
1161 return; /* No CS GPIO */
1162
1163 /*
1164 * On the first version of the controller (AT91RM9200), CS0
1165 * can't be used associated with GPIO
1166 */
1167 if (atmel_spi_is_v2(as))
1168 i = 0;
1169 else
1170 i = 1;
1171
1172 for (; i < 4; i++)
1173 if (master->cs_gpiods[i])
1174 as->native_cs_free |= BIT(i);
1175
1176 if (as->native_cs_free)
1177 as->native_cs_for_gpio = ffs(as->native_cs_free);
1178}
1179
1180static int atmel_spi_setup(struct spi_device *spi)
1181{
1182 struct atmel_spi *as;
1183 struct atmel_spi_device *asd;
1184 u32 csr;
1185 unsigned int bits = spi->bits_per_word;
1186 int chip_select;
1187 int word_delay_csr;
1188
1189 as = spi_master_get_devdata(spi->master);
1190
1191 /* see notes above re chipselect */
1192 if (!spi->cs_gpiod && (spi->mode & SPI_CS_HIGH)) {
1193 dev_warn(&spi->dev, "setup: non GPIO CS can't be active-high\n");
1194 return -EINVAL;
1195 }
1196
1197 /* Setup() is called during spi_register_controller(aka
1198 * spi_register_master) but after all membmers of the cs_gpiod
1199 * array have been filled, so we can looked for which native
1200 * CS will be free for using with GPIO
1201 */
1202 initialize_native_cs_for_gpio(as);
1203
1204 if (spi->cs_gpiod && as->native_cs_free) {
1205 dev_err(&spi->dev,
1206 "No native CS available to support this GPIO CS\n");
1207 return -EBUSY;
1208 }
1209
1210 if (spi->cs_gpiod)
1211 chip_select = as->native_cs_for_gpio;
1212 else
1213 chip_select = spi->chip_select;
1214
1215 csr = SPI_BF(BITS, bits - 8);
1216 if (spi->mode & SPI_CPOL)
1217 csr |= SPI_BIT(CPOL);
1218 if (!(spi->mode & SPI_CPHA))
1219 csr |= SPI_BIT(NCPHA);
1220
1221 if (!spi->cs_gpiod)
1222 csr |= SPI_BIT(CSAAT);
1223 csr |= SPI_BF(DLYBS, 0);
1224
1225 word_delay_csr = atmel_word_delay_csr(spi, as);
1226 if (word_delay_csr < 0)
1227 return word_delay_csr;
1228
1229 /* DLYBCT adds delays between words. This is useful for slow devices
1230 * that need a bit of time to setup the next transfer.
1231 */
1232 csr |= SPI_BF(DLYBCT, word_delay_csr);
1233
1234 asd = spi->controller_state;
1235 if (!asd) {
1236 asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
1237 if (!asd)
1238 return -ENOMEM;
1239
1240 spi->controller_state = asd;
1241 }
1242
1243 asd->csr = csr;
1244
1245 dev_dbg(&spi->dev,
1246 "setup: bpw %u mode 0x%x -> csr%d %08x\n",
1247 bits, spi->mode, spi->chip_select, csr);
1248
1249 if (!atmel_spi_is_v2(as))
1250 spi_writel(as, CSR0 + 4 * chip_select, csr);
1251
1252 return 0;
1253}
1254
1255static void atmel_spi_set_cs(struct spi_device *spi, bool enable)
1256{
1257 struct atmel_spi *as = spi_master_get_devdata(spi->master);
1258 /* the core doesn't really pass us enable/disable, but CS HIGH vs CS LOW
1259 * since we already have routines for activate/deactivate translate
1260 * high/low to active/inactive
1261 */
1262 enable = (!!(spi->mode & SPI_CS_HIGH) == enable);
1263
1264 if (enable) {
1265 cs_activate(as, spi);
1266 } else {
1267 cs_deactivate(as, spi);
1268 }
1269
1270}
1271
1272static int atmel_spi_one_transfer(struct spi_master *master,
1273 struct spi_device *spi,
1274 struct spi_transfer *xfer)
1275{
1276 struct atmel_spi *as;
1277 u8 bits;
1278 u32 len;
1279 struct atmel_spi_device *asd;
1280 int timeout;
1281 int ret;
1282 unsigned long dma_timeout;
1283
1284 as = spi_master_get_devdata(master);
1285
1286 asd = spi->controller_state;
1287 bits = (asd->csr >> 4) & 0xf;
1288 if (bits != xfer->bits_per_word - 8) {
1289 dev_dbg(&spi->dev,
1290 "you can't yet change bits_per_word in transfers\n");
1291 return -ENOPROTOOPT;
1292 }
1293
1294 /*
1295 * DMA map early, for performance (empties dcache ASAP) and
1296 * better fault reporting.
1297 */
1298 if ((!master->cur_msg->is_dma_mapped)
1299 && as->use_pdc) {
1300 if (atmel_spi_dma_map_xfer(as, xfer) < 0)
1301 return -ENOMEM;
1302 }
1303
1304 atmel_spi_set_xfer_speed(as, spi, xfer);
1305
1306 as->done_status = 0;
1307 as->current_transfer = xfer;
1308 as->current_remaining_bytes = xfer->len;
1309 while (as->current_remaining_bytes) {
1310 reinit_completion(&as->xfer_completion);
1311
1312 if (as->use_pdc) {
1313 atmel_spi_lock(as);
1314 atmel_spi_pdc_next_xfer(master, xfer);
1315 atmel_spi_unlock(as);
1316 } else if (atmel_spi_use_dma(as, xfer)) {
1317 len = as->current_remaining_bytes;
1318 ret = atmel_spi_next_xfer_dma_submit(master,
1319 xfer, &len);
1320 if (ret) {
1321 dev_err(&spi->dev,
1322 "unable to use DMA, fallback to PIO\n");
1323 as->done_status = ret;
1324 break;
1325 } else {
1326 as->current_remaining_bytes -= len;
1327 if (as->current_remaining_bytes < 0)
1328 as->current_remaining_bytes = 0;
1329 }
1330 } else {
1331 atmel_spi_lock(as);
1332 atmel_spi_next_xfer_pio(master, xfer);
1333 atmel_spi_unlock(as);
1334 }
1335
1336 dma_timeout = wait_for_completion_timeout(&as->xfer_completion,
1337 SPI_DMA_TIMEOUT);
1338 if (WARN_ON(dma_timeout == 0)) {
1339 dev_err(&spi->dev, "spi transfer timeout\n");
1340 as->done_status = -EIO;
1341 }
1342
1343 if (as->done_status)
1344 break;
1345 }
1346
1347 if (as->done_status) {
1348 if (as->use_pdc) {
1349 dev_warn(master->dev.parent,
1350 "overrun (%u/%u remaining)\n",
1351 spi_readl(as, TCR), spi_readl(as, RCR));
1352
1353 /*
1354 * Clean up DMA registers and make sure the data
1355 * registers are empty.
1356 */
1357 spi_writel(as, RNCR, 0);
1358 spi_writel(as, TNCR, 0);
1359 spi_writel(as, RCR, 0);
1360 spi_writel(as, TCR, 0);
1361 for (timeout = 1000; timeout; timeout--)
1362 if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
1363 break;
1364 if (!timeout)
1365 dev_warn(master->dev.parent,
1366 "timeout waiting for TXEMPTY");
1367 while (spi_readl(as, SR) & SPI_BIT(RDRF))
1368 spi_readl(as, RDR);
1369
1370 /* Clear any overrun happening while cleaning up */
1371 spi_readl(as, SR);
1372
1373 } else if (atmel_spi_use_dma(as, xfer)) {
1374 atmel_spi_stop_dma(master);
1375 }
1376 }
1377
1378 if (!master->cur_msg->is_dma_mapped
1379 && as->use_pdc)
1380 atmel_spi_dma_unmap_xfer(master, xfer);
1381
1382 if (as->use_pdc)
1383 atmel_spi_disable_pdc_transfer(as);
1384
1385 return as->done_status;
1386}
1387
1388static void atmel_spi_cleanup(struct spi_device *spi)
1389{
1390 struct atmel_spi_device *asd = spi->controller_state;
1391
1392 if (!asd)
1393 return;
1394
1395 spi->controller_state = NULL;
1396 kfree(asd);
1397}
1398
1399static inline unsigned int atmel_get_version(struct atmel_spi *as)
1400{
1401 return spi_readl(as, VERSION) & 0x00000fff;
1402}
1403
1404static void atmel_get_caps(struct atmel_spi *as)
1405{
1406 unsigned int version;
1407
1408 version = atmel_get_version(as);
1409
1410 as->caps.is_spi2 = version > 0x121;
1411 as->caps.has_wdrbt = version >= 0x210;
1412 as->caps.has_dma_support = version >= 0x212;
1413 as->caps.has_pdc_support = version < 0x212;
1414}
1415
1416static void atmel_spi_init(struct atmel_spi *as)
1417{
1418 spi_writel(as, CR, SPI_BIT(SWRST));
1419 spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1420
1421 /* It is recommended to enable FIFOs first thing after reset */
1422 if (as->fifo_size)
1423 spi_writel(as, CR, SPI_BIT(FIFOEN));
1424
1425 if (as->caps.has_wdrbt) {
1426 spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
1427 | SPI_BIT(MSTR));
1428 } else {
1429 spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
1430 }
1431
1432 if (as->use_pdc)
1433 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
1434 spi_writel(as, CR, SPI_BIT(SPIEN));
1435}
1436
1437static int atmel_spi_probe(struct platform_device *pdev)
1438{
1439 struct resource *regs;
1440 int irq;
1441 struct clk *clk;
1442 int ret;
1443 struct spi_master *master;
1444 struct atmel_spi *as;
1445
1446 /* Select default pin state */
1447 pinctrl_pm_select_default_state(&pdev->dev);
1448
1449 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1450 if (!regs)
1451 return -ENXIO;
1452
1453 irq = platform_get_irq(pdev, 0);
1454 if (irq < 0)
1455 return irq;
1456
1457 clk = devm_clk_get(&pdev->dev, "spi_clk");
1458 if (IS_ERR(clk))
1459 return PTR_ERR(clk);
1460
1461 /* setup spi core then atmel-specific driver state */
1462 master = spi_alloc_master(&pdev->dev, sizeof(*as));
1463 if (!master)
1464 return -ENOMEM;
1465
1466 /* the spi->mode bits understood by this driver: */
1467 master->use_gpio_descriptors = true;
1468 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
1469 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 16);
1470 master->dev.of_node = pdev->dev.of_node;
1471 master->bus_num = pdev->id;
1472 master->num_chipselect = 4;
1473 master->setup = atmel_spi_setup;
1474 master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX |
1475 SPI_MASTER_GPIO_SS);
1476 master->transfer_one = atmel_spi_one_transfer;
1477 master->set_cs = atmel_spi_set_cs;
1478 master->cleanup = atmel_spi_cleanup;
1479 master->auto_runtime_pm = true;
1480 master->max_dma_len = SPI_MAX_DMA_XFER;
1481 master->can_dma = atmel_spi_can_dma;
1482 platform_set_drvdata(pdev, master);
1483
1484 as = spi_master_get_devdata(master);
1485
1486 spin_lock_init(&as->lock);
1487
1488 as->pdev = pdev;
1489 as->regs = devm_ioremap_resource(&pdev->dev, regs);
1490 if (IS_ERR(as->regs)) {
1491 ret = PTR_ERR(as->regs);
1492 goto out_unmap_regs;
1493 }
1494 as->phybase = regs->start;
1495 as->irq = irq;
1496 as->clk = clk;
1497
1498 init_completion(&as->xfer_completion);
1499
1500 atmel_get_caps(as);
1501
1502 as->use_dma = false;
1503 as->use_pdc = false;
1504 if (as->caps.has_dma_support) {
1505 ret = atmel_spi_configure_dma(master, as);
1506 if (ret == 0) {
1507 as->use_dma = true;
1508 } else if (ret == -EPROBE_DEFER) {
1509 goto out_unmap_regs;
1510 }
1511 } else if (as->caps.has_pdc_support) {
1512 as->use_pdc = true;
1513 }
1514
1515 if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
1516 as->addr_rx_bbuf = dma_alloc_coherent(&pdev->dev,
1517 SPI_MAX_DMA_XFER,
1518 &as->dma_addr_rx_bbuf,
1519 GFP_KERNEL | GFP_DMA);
1520 if (!as->addr_rx_bbuf) {
1521 as->use_dma = false;
1522 } else {
1523 as->addr_tx_bbuf = dma_alloc_coherent(&pdev->dev,
1524 SPI_MAX_DMA_XFER,
1525 &as->dma_addr_tx_bbuf,
1526 GFP_KERNEL | GFP_DMA);
1527 if (!as->addr_tx_bbuf) {
1528 as->use_dma = false;
1529 dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
1530 as->addr_rx_bbuf,
1531 as->dma_addr_rx_bbuf);
1532 }
1533 }
1534 if (!as->use_dma)
1535 dev_info(master->dev.parent,
1536 " can not allocate dma coherent memory\n");
1537 }
1538
1539 if (as->caps.has_dma_support && !as->use_dma)
1540 dev_info(&pdev->dev, "Atmel SPI Controller using PIO only\n");
1541
1542 if (as->use_pdc) {
1543 ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pdc_interrupt,
1544 0, dev_name(&pdev->dev), master);
1545 } else {
1546 ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pio_interrupt,
1547 0, dev_name(&pdev->dev), master);
1548 }
1549 if (ret)
1550 goto out_unmap_regs;
1551
1552 /* Initialize the hardware */
1553 ret = clk_prepare_enable(clk);
1554 if (ret)
1555 goto out_free_irq;
1556
1557 as->spi_clk = clk_get_rate(clk);
1558
1559 as->fifo_size = 0;
1560 if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
1561 &as->fifo_size)) {
1562 dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size);
1563 }
1564
1565 atmel_spi_init(as);
1566
1567 pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
1568 pm_runtime_use_autosuspend(&pdev->dev);
1569 pm_runtime_set_active(&pdev->dev);
1570 pm_runtime_enable(&pdev->dev);
1571
1572 ret = devm_spi_register_master(&pdev->dev, master);
1573 if (ret)
1574 goto out_free_dma;
1575
1576 /* go! */
1577 dev_info(&pdev->dev, "Atmel SPI Controller version 0x%x at 0x%08lx (irq %d)\n",
1578 atmel_get_version(as), (unsigned long)regs->start,
1579 irq);
1580
1581 return 0;
1582
1583out_free_dma:
1584 pm_runtime_disable(&pdev->dev);
1585 pm_runtime_set_suspended(&pdev->dev);
1586
1587 if (as->use_dma)
1588 atmel_spi_release_dma(master);
1589
1590 spi_writel(as, CR, SPI_BIT(SWRST));
1591 spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1592 clk_disable_unprepare(clk);
1593out_free_irq:
1594out_unmap_regs:
1595 spi_master_put(master);
1596 return ret;
1597}
1598
1599static int atmel_spi_remove(struct platform_device *pdev)
1600{
1601 struct spi_master *master = platform_get_drvdata(pdev);
1602 struct atmel_spi *as = spi_master_get_devdata(master);
1603
1604 pm_runtime_get_sync(&pdev->dev);
1605
1606 /* reset the hardware and block queue progress */
1607 if (as->use_dma) {
1608 atmel_spi_stop_dma(master);
1609 atmel_spi_release_dma(master);
1610 if (IS_ENABLED(CONFIG_SOC_SAM_V4_V5)) {
1611 dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
1612 as->addr_tx_bbuf,
1613 as->dma_addr_tx_bbuf);
1614 dma_free_coherent(&pdev->dev, SPI_MAX_DMA_XFER,
1615 as->addr_rx_bbuf,
1616 as->dma_addr_rx_bbuf);
1617 }
1618 }
1619
1620 spin_lock_irq(&as->lock);
1621 spi_writel(as, CR, SPI_BIT(SWRST));
1622 spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1623 spi_readl(as, SR);
1624 spin_unlock_irq(&as->lock);
1625
1626 clk_disable_unprepare(as->clk);
1627
1628 pm_runtime_put_noidle(&pdev->dev);
1629 pm_runtime_disable(&pdev->dev);
1630
1631 return 0;
1632}
1633
1634static int atmel_spi_runtime_suspend(struct device *dev)
1635{
1636 struct spi_master *master = dev_get_drvdata(dev);
1637 struct atmel_spi *as = spi_master_get_devdata(master);
1638
1639 clk_disable_unprepare(as->clk);
1640 pinctrl_pm_select_sleep_state(dev);
1641
1642 return 0;
1643}
1644
1645static int atmel_spi_runtime_resume(struct device *dev)
1646{
1647 struct spi_master *master = dev_get_drvdata(dev);
1648 struct atmel_spi *as = spi_master_get_devdata(master);
1649
1650 pinctrl_pm_select_default_state(dev);
1651
1652 return clk_prepare_enable(as->clk);
1653}
1654
1655static int atmel_spi_suspend(struct device *dev)
1656{
1657 struct spi_master *master = dev_get_drvdata(dev);
1658 int ret;
1659
1660 /* Stop the queue running */
1661 ret = spi_master_suspend(master);
1662 if (ret)
1663 return ret;
1664
1665 if (!pm_runtime_suspended(dev))
1666 atmel_spi_runtime_suspend(dev);
1667
1668 return 0;
1669}
1670
1671static int atmel_spi_resume(struct device *dev)
1672{
1673 struct spi_master *master = dev_get_drvdata(dev);
1674 struct atmel_spi *as = spi_master_get_devdata(master);
1675 int ret;
1676
1677 ret = clk_prepare_enable(as->clk);
1678 if (ret)
1679 return ret;
1680
1681 atmel_spi_init(as);
1682
1683 clk_disable_unprepare(as->clk);
1684
1685 if (!pm_runtime_suspended(dev)) {
1686 ret = atmel_spi_runtime_resume(dev);
1687 if (ret)
1688 return ret;
1689 }
1690
1691 /* Start the queue running */
1692 return spi_master_resume(master);
1693}
1694
1695static const struct dev_pm_ops atmel_spi_pm_ops = {
1696 SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume)
1697 RUNTIME_PM_OPS(atmel_spi_runtime_suspend,
1698 atmel_spi_runtime_resume, NULL)
1699};
1700
1701static const struct of_device_id atmel_spi_dt_ids[] = {
1702 { .compatible = "atmel,at91rm9200-spi" },
1703 { /* sentinel */ }
1704};
1705
1706MODULE_DEVICE_TABLE(of, atmel_spi_dt_ids);
1707
1708static struct platform_driver atmel_spi_driver = {
1709 .driver = {
1710 .name = "atmel_spi",
1711 .pm = pm_ptr(&atmel_spi_pm_ops),
1712 .of_match_table = atmel_spi_dt_ids,
1713 },
1714 .probe = atmel_spi_probe,
1715 .remove = atmel_spi_remove,
1716};
1717module_platform_driver(atmel_spi_driver);
1718
1719MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
1720MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
1721MODULE_LICENSE("GPL");
1722MODULE_ALIAS("platform:atmel_spi");
1/*
2 * Driver for Atmel AT32 and AT91 SPI Controllers
3 *
4 * Copyright (C) 2006 Atmel Corporation
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <linux/kernel.h>
12#include <linux/clk.h>
13#include <linux/module.h>
14#include <linux/platform_device.h>
15#include <linux/delay.h>
16#include <linux/dma-mapping.h>
17#include <linux/dmaengine.h>
18#include <linux/err.h>
19#include <linux/interrupt.h>
20#include <linux/spi/spi.h>
21#include <linux/slab.h>
22#include <linux/platform_data/dma-atmel.h>
23#include <linux/of.h>
24
25#include <linux/io.h>
26#include <linux/gpio.h>
27#include <linux/pinctrl/consumer.h>
28#include <linux/pm_runtime.h>
29
30/* SPI register offsets */
31#define SPI_CR 0x0000
32#define SPI_MR 0x0004
33#define SPI_RDR 0x0008
34#define SPI_TDR 0x000c
35#define SPI_SR 0x0010
36#define SPI_IER 0x0014
37#define SPI_IDR 0x0018
38#define SPI_IMR 0x001c
39#define SPI_CSR0 0x0030
40#define SPI_CSR1 0x0034
41#define SPI_CSR2 0x0038
42#define SPI_CSR3 0x003c
43#define SPI_FMR 0x0040
44#define SPI_FLR 0x0044
45#define SPI_VERSION 0x00fc
46#define SPI_RPR 0x0100
47#define SPI_RCR 0x0104
48#define SPI_TPR 0x0108
49#define SPI_TCR 0x010c
50#define SPI_RNPR 0x0110
51#define SPI_RNCR 0x0114
52#define SPI_TNPR 0x0118
53#define SPI_TNCR 0x011c
54#define SPI_PTCR 0x0120
55#define SPI_PTSR 0x0124
56
57/* Bitfields in CR */
58#define SPI_SPIEN_OFFSET 0
59#define SPI_SPIEN_SIZE 1
60#define SPI_SPIDIS_OFFSET 1
61#define SPI_SPIDIS_SIZE 1
62#define SPI_SWRST_OFFSET 7
63#define SPI_SWRST_SIZE 1
64#define SPI_LASTXFER_OFFSET 24
65#define SPI_LASTXFER_SIZE 1
66#define SPI_TXFCLR_OFFSET 16
67#define SPI_TXFCLR_SIZE 1
68#define SPI_RXFCLR_OFFSET 17
69#define SPI_RXFCLR_SIZE 1
70#define SPI_FIFOEN_OFFSET 30
71#define SPI_FIFOEN_SIZE 1
72#define SPI_FIFODIS_OFFSET 31
73#define SPI_FIFODIS_SIZE 1
74
75/* Bitfields in MR */
76#define SPI_MSTR_OFFSET 0
77#define SPI_MSTR_SIZE 1
78#define SPI_PS_OFFSET 1
79#define SPI_PS_SIZE 1
80#define SPI_PCSDEC_OFFSET 2
81#define SPI_PCSDEC_SIZE 1
82#define SPI_FDIV_OFFSET 3
83#define SPI_FDIV_SIZE 1
84#define SPI_MODFDIS_OFFSET 4
85#define SPI_MODFDIS_SIZE 1
86#define SPI_WDRBT_OFFSET 5
87#define SPI_WDRBT_SIZE 1
88#define SPI_LLB_OFFSET 7
89#define SPI_LLB_SIZE 1
90#define SPI_PCS_OFFSET 16
91#define SPI_PCS_SIZE 4
92#define SPI_DLYBCS_OFFSET 24
93#define SPI_DLYBCS_SIZE 8
94
95/* Bitfields in RDR */
96#define SPI_RD_OFFSET 0
97#define SPI_RD_SIZE 16
98
99/* Bitfields in TDR */
100#define SPI_TD_OFFSET 0
101#define SPI_TD_SIZE 16
102
103/* Bitfields in SR */
104#define SPI_RDRF_OFFSET 0
105#define SPI_RDRF_SIZE 1
106#define SPI_TDRE_OFFSET 1
107#define SPI_TDRE_SIZE 1
108#define SPI_MODF_OFFSET 2
109#define SPI_MODF_SIZE 1
110#define SPI_OVRES_OFFSET 3
111#define SPI_OVRES_SIZE 1
112#define SPI_ENDRX_OFFSET 4
113#define SPI_ENDRX_SIZE 1
114#define SPI_ENDTX_OFFSET 5
115#define SPI_ENDTX_SIZE 1
116#define SPI_RXBUFF_OFFSET 6
117#define SPI_RXBUFF_SIZE 1
118#define SPI_TXBUFE_OFFSET 7
119#define SPI_TXBUFE_SIZE 1
120#define SPI_NSSR_OFFSET 8
121#define SPI_NSSR_SIZE 1
122#define SPI_TXEMPTY_OFFSET 9
123#define SPI_TXEMPTY_SIZE 1
124#define SPI_SPIENS_OFFSET 16
125#define SPI_SPIENS_SIZE 1
126#define SPI_TXFEF_OFFSET 24
127#define SPI_TXFEF_SIZE 1
128#define SPI_TXFFF_OFFSET 25
129#define SPI_TXFFF_SIZE 1
130#define SPI_TXFTHF_OFFSET 26
131#define SPI_TXFTHF_SIZE 1
132#define SPI_RXFEF_OFFSET 27
133#define SPI_RXFEF_SIZE 1
134#define SPI_RXFFF_OFFSET 28
135#define SPI_RXFFF_SIZE 1
136#define SPI_RXFTHF_OFFSET 29
137#define SPI_RXFTHF_SIZE 1
138#define SPI_TXFPTEF_OFFSET 30
139#define SPI_TXFPTEF_SIZE 1
140#define SPI_RXFPTEF_OFFSET 31
141#define SPI_RXFPTEF_SIZE 1
142
143/* Bitfields in CSR0 */
144#define SPI_CPOL_OFFSET 0
145#define SPI_CPOL_SIZE 1
146#define SPI_NCPHA_OFFSET 1
147#define SPI_NCPHA_SIZE 1
148#define SPI_CSAAT_OFFSET 3
149#define SPI_CSAAT_SIZE 1
150#define SPI_BITS_OFFSET 4
151#define SPI_BITS_SIZE 4
152#define SPI_SCBR_OFFSET 8
153#define SPI_SCBR_SIZE 8
154#define SPI_DLYBS_OFFSET 16
155#define SPI_DLYBS_SIZE 8
156#define SPI_DLYBCT_OFFSET 24
157#define SPI_DLYBCT_SIZE 8
158
159/* Bitfields in RCR */
160#define SPI_RXCTR_OFFSET 0
161#define SPI_RXCTR_SIZE 16
162
163/* Bitfields in TCR */
164#define SPI_TXCTR_OFFSET 0
165#define SPI_TXCTR_SIZE 16
166
167/* Bitfields in RNCR */
168#define SPI_RXNCR_OFFSET 0
169#define SPI_RXNCR_SIZE 16
170
171/* Bitfields in TNCR */
172#define SPI_TXNCR_OFFSET 0
173#define SPI_TXNCR_SIZE 16
174
175/* Bitfields in PTCR */
176#define SPI_RXTEN_OFFSET 0
177#define SPI_RXTEN_SIZE 1
178#define SPI_RXTDIS_OFFSET 1
179#define SPI_RXTDIS_SIZE 1
180#define SPI_TXTEN_OFFSET 8
181#define SPI_TXTEN_SIZE 1
182#define SPI_TXTDIS_OFFSET 9
183#define SPI_TXTDIS_SIZE 1
184
185/* Bitfields in FMR */
186#define SPI_TXRDYM_OFFSET 0
187#define SPI_TXRDYM_SIZE 2
188#define SPI_RXRDYM_OFFSET 4
189#define SPI_RXRDYM_SIZE 2
190#define SPI_TXFTHRES_OFFSET 16
191#define SPI_TXFTHRES_SIZE 6
192#define SPI_RXFTHRES_OFFSET 24
193#define SPI_RXFTHRES_SIZE 6
194
195/* Bitfields in FLR */
196#define SPI_TXFL_OFFSET 0
197#define SPI_TXFL_SIZE 6
198#define SPI_RXFL_OFFSET 16
199#define SPI_RXFL_SIZE 6
200
201/* Constants for BITS */
202#define SPI_BITS_8_BPT 0
203#define SPI_BITS_9_BPT 1
204#define SPI_BITS_10_BPT 2
205#define SPI_BITS_11_BPT 3
206#define SPI_BITS_12_BPT 4
207#define SPI_BITS_13_BPT 5
208#define SPI_BITS_14_BPT 6
209#define SPI_BITS_15_BPT 7
210#define SPI_BITS_16_BPT 8
211#define SPI_ONE_DATA 0
212#define SPI_TWO_DATA 1
213#define SPI_FOUR_DATA 2
214
215/* Bit manipulation macros */
216#define SPI_BIT(name) \
217 (1 << SPI_##name##_OFFSET)
218#define SPI_BF(name, value) \
219 (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
220#define SPI_BFEXT(name, value) \
221 (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
222#define SPI_BFINS(name, value, old) \
223 (((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
224 | SPI_BF(name, value))
225
226/* Register access macros */
227#ifdef CONFIG_AVR32
228#define spi_readl(port, reg) \
229 __raw_readl((port)->regs + SPI_##reg)
230#define spi_writel(port, reg, value) \
231 __raw_writel((value), (port)->regs + SPI_##reg)
232
233#define spi_readw(port, reg) \
234 __raw_readw((port)->regs + SPI_##reg)
235#define spi_writew(port, reg, value) \
236 __raw_writew((value), (port)->regs + SPI_##reg)
237
238#define spi_readb(port, reg) \
239 __raw_readb((port)->regs + SPI_##reg)
240#define spi_writeb(port, reg, value) \
241 __raw_writeb((value), (port)->regs + SPI_##reg)
242#else
243#define spi_readl(port, reg) \
244 readl_relaxed((port)->regs + SPI_##reg)
245#define spi_writel(port, reg, value) \
246 writel_relaxed((value), (port)->regs + SPI_##reg)
247
248#define spi_readw(port, reg) \
249 readw_relaxed((port)->regs + SPI_##reg)
250#define spi_writew(port, reg, value) \
251 writew_relaxed((value), (port)->regs + SPI_##reg)
252
253#define spi_readb(port, reg) \
254 readb_relaxed((port)->regs + SPI_##reg)
255#define spi_writeb(port, reg, value) \
256 writeb_relaxed((value), (port)->regs + SPI_##reg)
257#endif
258/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
259 * cache operations; better heuristics consider wordsize and bitrate.
260 */
261#define DMA_MIN_BYTES 16
262
263#define SPI_DMA_TIMEOUT (msecs_to_jiffies(1000))
264
265#define AUTOSUSPEND_TIMEOUT 2000
266
267struct atmel_spi_dma {
268 struct dma_chan *chan_rx;
269 struct dma_chan *chan_tx;
270 struct scatterlist sgrx;
271 struct scatterlist sgtx;
272 struct dma_async_tx_descriptor *data_desc_rx;
273 struct dma_async_tx_descriptor *data_desc_tx;
274
275 struct at_dma_slave dma_slave;
276};
277
278struct atmel_spi_caps {
279 bool is_spi2;
280 bool has_wdrbt;
281 bool has_dma_support;
282};
283
284/*
285 * The core SPI transfer engine just talks to a register bank to set up
286 * DMA transfers; transfer queue progress is driven by IRQs. The clock
287 * framework provides the base clock, subdivided for each spi_device.
288 */
289struct atmel_spi {
290 spinlock_t lock;
291 unsigned long flags;
292
293 phys_addr_t phybase;
294 void __iomem *regs;
295 int irq;
296 struct clk *clk;
297 struct platform_device *pdev;
298
299 struct spi_transfer *current_transfer;
300 int current_remaining_bytes;
301 int done_status;
302
303 struct completion xfer_completion;
304
305 /* scratch buffer */
306 void *buffer;
307 dma_addr_t buffer_dma;
308
309 struct atmel_spi_caps caps;
310
311 bool use_dma;
312 bool use_pdc;
313 bool use_cs_gpios;
314 /* dmaengine data */
315 struct atmel_spi_dma dma;
316
317 bool keep_cs;
318 bool cs_active;
319
320 u32 fifo_size;
321};
322
323/* Controller-specific per-slave state */
324struct atmel_spi_device {
325 unsigned int npcs_pin;
326 u32 csr;
327};
328
329#define BUFFER_SIZE PAGE_SIZE
330#define INVALID_DMA_ADDRESS 0xffffffff
331
332/*
333 * Version 2 of the SPI controller has
334 * - CR.LASTXFER
335 * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
336 * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
337 * - SPI_CSRx.CSAAT
338 * - SPI_CSRx.SBCR allows faster clocking
339 */
340static bool atmel_spi_is_v2(struct atmel_spi *as)
341{
342 return as->caps.is_spi2;
343}
344
345/*
346 * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
347 * they assume that spi slave device state will not change on deselect, so
348 * that automagic deselection is OK. ("NPCSx rises if no data is to be
349 * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
350 * controllers have CSAAT and friends.
351 *
352 * Since the CSAAT functionality is a bit weird on newer controllers as
353 * well, we use GPIO to control nCSx pins on all controllers, updating
354 * MR.PCS to avoid confusing the controller. Using GPIOs also lets us
355 * support active-high chipselects despite the controller's belief that
356 * only active-low devices/systems exists.
357 *
358 * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
359 * right when driven with GPIO. ("Mode Fault does not allow more than one
360 * Master on Chip Select 0.") No workaround exists for that ... so for
361 * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
362 * and (c) will trigger that first erratum in some cases.
363 */
364
365static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
366{
367 struct atmel_spi_device *asd = spi->controller_state;
368 unsigned active = spi->mode & SPI_CS_HIGH;
369 u32 mr;
370
371 if (atmel_spi_is_v2(as)) {
372 spi_writel(as, CSR0 + 4 * spi->chip_select, asd->csr);
373 /* For the low SPI version, there is a issue that PDC transfer
374 * on CS1,2,3 needs SPI_CSR0.BITS config as SPI_CSR1,2,3.BITS
375 */
376 spi_writel(as, CSR0, asd->csr);
377 if (as->caps.has_wdrbt) {
378 spi_writel(as, MR,
379 SPI_BF(PCS, ~(0x01 << spi->chip_select))
380 | SPI_BIT(WDRBT)
381 | SPI_BIT(MODFDIS)
382 | SPI_BIT(MSTR));
383 } else {
384 spi_writel(as, MR,
385 SPI_BF(PCS, ~(0x01 << spi->chip_select))
386 | SPI_BIT(MODFDIS)
387 | SPI_BIT(MSTR));
388 }
389
390 mr = spi_readl(as, MR);
391 if (as->use_cs_gpios)
392 gpio_set_value(asd->npcs_pin, active);
393 } else {
394 u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
395 int i;
396 u32 csr;
397
398 /* Make sure clock polarity is correct */
399 for (i = 0; i < spi->master->num_chipselect; i++) {
400 csr = spi_readl(as, CSR0 + 4 * i);
401 if ((csr ^ cpol) & SPI_BIT(CPOL))
402 spi_writel(as, CSR0 + 4 * i,
403 csr ^ SPI_BIT(CPOL));
404 }
405
406 mr = spi_readl(as, MR);
407 mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
408 if (as->use_cs_gpios && spi->chip_select != 0)
409 gpio_set_value(asd->npcs_pin, active);
410 spi_writel(as, MR, mr);
411 }
412
413 dev_dbg(&spi->dev, "activate %u%s, mr %08x\n",
414 asd->npcs_pin, active ? " (high)" : "",
415 mr);
416}
417
418static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
419{
420 struct atmel_spi_device *asd = spi->controller_state;
421 unsigned active = spi->mode & SPI_CS_HIGH;
422 u32 mr;
423
424 /* only deactivate *this* device; sometimes transfers to
425 * another device may be active when this routine is called.
426 */
427 mr = spi_readl(as, MR);
428 if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
429 mr = SPI_BFINS(PCS, 0xf, mr);
430 spi_writel(as, MR, mr);
431 }
432
433 dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
434 asd->npcs_pin, active ? " (low)" : "",
435 mr);
436
437 if (!as->use_cs_gpios)
438 spi_writel(as, CR, SPI_BIT(LASTXFER));
439 else if (atmel_spi_is_v2(as) || spi->chip_select != 0)
440 gpio_set_value(asd->npcs_pin, !active);
441}
442
443static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock)
444{
445 spin_lock_irqsave(&as->lock, as->flags);
446}
447
448static void atmel_spi_unlock(struct atmel_spi *as) __releases(&as->lock)
449{
450 spin_unlock_irqrestore(&as->lock, as->flags);
451}
452
453static inline bool atmel_spi_use_dma(struct atmel_spi *as,
454 struct spi_transfer *xfer)
455{
456 return as->use_dma && xfer->len >= DMA_MIN_BYTES;
457}
458
459static int atmel_spi_dma_slave_config(struct atmel_spi *as,
460 struct dma_slave_config *slave_config,
461 u8 bits_per_word)
462{
463 int err = 0;
464
465 if (bits_per_word > 8) {
466 slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
467 slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
468 } else {
469 slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
470 slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
471 }
472
473 slave_config->dst_addr = (dma_addr_t)as->phybase + SPI_TDR;
474 slave_config->src_addr = (dma_addr_t)as->phybase + SPI_RDR;
475 slave_config->src_maxburst = 1;
476 slave_config->dst_maxburst = 1;
477 slave_config->device_fc = false;
478
479 /*
480 * This driver uses fixed peripheral select mode (PS bit set to '0' in
481 * the Mode Register).
482 * So according to the datasheet, when FIFOs are available (and
483 * enabled), the Transmit FIFO operates in Multiple Data Mode.
484 * In this mode, up to 2 data, not 4, can be written into the Transmit
485 * Data Register in a single access.
486 * However, the first data has to be written into the lowest 16 bits and
487 * the second data into the highest 16 bits of the Transmit
488 * Data Register. For 8bit data (the most frequent case), it would
489 * require to rework tx_buf so each data would actualy fit 16 bits.
490 * So we'd rather write only one data at the time. Hence the transmit
491 * path works the same whether FIFOs are available (and enabled) or not.
492 */
493 slave_config->direction = DMA_MEM_TO_DEV;
494 if (dmaengine_slave_config(as->dma.chan_tx, slave_config)) {
495 dev_err(&as->pdev->dev,
496 "failed to configure tx dma channel\n");
497 err = -EINVAL;
498 }
499
500 /*
501 * This driver configures the spi controller for master mode (MSTR bit
502 * set to '1' in the Mode Register).
503 * So according to the datasheet, when FIFOs are available (and
504 * enabled), the Receive FIFO operates in Single Data Mode.
505 * So the receive path works the same whether FIFOs are available (and
506 * enabled) or not.
507 */
508 slave_config->direction = DMA_DEV_TO_MEM;
509 if (dmaengine_slave_config(as->dma.chan_rx, slave_config)) {
510 dev_err(&as->pdev->dev,
511 "failed to configure rx dma channel\n");
512 err = -EINVAL;
513 }
514
515 return err;
516}
517
518static int atmel_spi_configure_dma(struct atmel_spi *as)
519{
520 struct dma_slave_config slave_config;
521 struct device *dev = &as->pdev->dev;
522 int err;
523
524 dma_cap_mask_t mask;
525 dma_cap_zero(mask);
526 dma_cap_set(DMA_SLAVE, mask);
527
528 as->dma.chan_tx = dma_request_slave_channel_reason(dev, "tx");
529 if (IS_ERR(as->dma.chan_tx)) {
530 err = PTR_ERR(as->dma.chan_tx);
531 if (err == -EPROBE_DEFER) {
532 dev_warn(dev, "no DMA channel available at the moment\n");
533 return err;
534 }
535 dev_err(dev,
536 "DMA TX channel not available, SPI unable to use DMA\n");
537 err = -EBUSY;
538 goto error;
539 }
540
541 /*
542 * No reason to check EPROBE_DEFER here since we have already requested
543 * tx channel. If it fails here, it's for another reason.
544 */
545 as->dma.chan_rx = dma_request_slave_channel(dev, "rx");
546
547 if (!as->dma.chan_rx) {
548 dev_err(dev,
549 "DMA RX channel not available, SPI unable to use DMA\n");
550 err = -EBUSY;
551 goto error;
552 }
553
554 err = atmel_spi_dma_slave_config(as, &slave_config, 8);
555 if (err)
556 goto error;
557
558 dev_info(&as->pdev->dev,
559 "Using %s (tx) and %s (rx) for DMA transfers\n",
560 dma_chan_name(as->dma.chan_tx),
561 dma_chan_name(as->dma.chan_rx));
562 return 0;
563error:
564 if (as->dma.chan_rx)
565 dma_release_channel(as->dma.chan_rx);
566 if (!IS_ERR(as->dma.chan_tx))
567 dma_release_channel(as->dma.chan_tx);
568 return err;
569}
570
571static void atmel_spi_stop_dma(struct atmel_spi *as)
572{
573 if (as->dma.chan_rx)
574 dmaengine_terminate_all(as->dma.chan_rx);
575 if (as->dma.chan_tx)
576 dmaengine_terminate_all(as->dma.chan_tx);
577}
578
579static void atmel_spi_release_dma(struct atmel_spi *as)
580{
581 if (as->dma.chan_rx)
582 dma_release_channel(as->dma.chan_rx);
583 if (as->dma.chan_tx)
584 dma_release_channel(as->dma.chan_tx);
585}
586
587/* This function is called by the DMA driver from tasklet context */
588static void dma_callback(void *data)
589{
590 struct spi_master *master = data;
591 struct atmel_spi *as = spi_master_get_devdata(master);
592
593 complete(&as->xfer_completion);
594}
595
596/*
597 * Next transfer using PIO without FIFO.
598 */
599static void atmel_spi_next_xfer_single(struct spi_master *master,
600 struct spi_transfer *xfer)
601{
602 struct atmel_spi *as = spi_master_get_devdata(master);
603 unsigned long xfer_pos = xfer->len - as->current_remaining_bytes;
604
605 dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_pio\n");
606
607 /* Make sure data is not remaining in RDR */
608 spi_readl(as, RDR);
609 while (spi_readl(as, SR) & SPI_BIT(RDRF)) {
610 spi_readl(as, RDR);
611 cpu_relax();
612 }
613
614 if (xfer->tx_buf) {
615 if (xfer->bits_per_word > 8)
616 spi_writel(as, TDR, *(u16 *)(xfer->tx_buf + xfer_pos));
617 else
618 spi_writel(as, TDR, *(u8 *)(xfer->tx_buf + xfer_pos));
619 } else {
620 spi_writel(as, TDR, 0);
621 }
622
623 dev_dbg(master->dev.parent,
624 " start pio xfer %p: len %u tx %p rx %p bitpw %d\n",
625 xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
626 xfer->bits_per_word);
627
628 /* Enable relevant interrupts */
629 spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES));
630}
631
632/*
633 * Next transfer using PIO with FIFO.
634 */
635static void atmel_spi_next_xfer_fifo(struct spi_master *master,
636 struct spi_transfer *xfer)
637{
638 struct atmel_spi *as = spi_master_get_devdata(master);
639 u32 current_remaining_data, num_data;
640 u32 offset = xfer->len - as->current_remaining_bytes;
641 const u16 *words = (const u16 *)((u8 *)xfer->tx_buf + offset);
642 const u8 *bytes = (const u8 *)((u8 *)xfer->tx_buf + offset);
643 u16 td0, td1;
644 u32 fifomr;
645
646 dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_fifo\n");
647
648 /* Compute the number of data to transfer in the current iteration */
649 current_remaining_data = ((xfer->bits_per_word > 8) ?
650 ((u32)as->current_remaining_bytes >> 1) :
651 (u32)as->current_remaining_bytes);
652 num_data = min(current_remaining_data, as->fifo_size);
653
654 /* Flush RX and TX FIFOs */
655 spi_writel(as, CR, SPI_BIT(RXFCLR) | SPI_BIT(TXFCLR));
656 while (spi_readl(as, FLR))
657 cpu_relax();
658
659 /* Set RX FIFO Threshold to the number of data to transfer */
660 fifomr = spi_readl(as, FMR);
661 spi_writel(as, FMR, SPI_BFINS(RXFTHRES, num_data, fifomr));
662
663 /* Clear FIFO flags in the Status Register, especially RXFTHF */
664 (void)spi_readl(as, SR);
665
666 /* Fill TX FIFO */
667 while (num_data >= 2) {
668 if (xfer->tx_buf) {
669 if (xfer->bits_per_word > 8) {
670 td0 = *words++;
671 td1 = *words++;
672 } else {
673 td0 = *bytes++;
674 td1 = *bytes++;
675 }
676 } else {
677 td0 = 0;
678 td1 = 0;
679 }
680
681 spi_writel(as, TDR, (td1 << 16) | td0);
682 num_data -= 2;
683 }
684
685 if (num_data) {
686 if (xfer->tx_buf) {
687 if (xfer->bits_per_word > 8)
688 td0 = *words++;
689 else
690 td0 = *bytes++;
691 } else {
692 td0 = 0;
693 }
694
695 spi_writew(as, TDR, td0);
696 num_data--;
697 }
698
699 dev_dbg(master->dev.parent,
700 " start fifo xfer %p: len %u tx %p rx %p bitpw %d\n",
701 xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
702 xfer->bits_per_word);
703
704 /*
705 * Enable RX FIFO Threshold Flag interrupt to be notified about
706 * transfer completion.
707 */
708 spi_writel(as, IER, SPI_BIT(RXFTHF) | SPI_BIT(OVRES));
709}
710
711/*
712 * Next transfer using PIO.
713 */
714static void atmel_spi_next_xfer_pio(struct spi_master *master,
715 struct spi_transfer *xfer)
716{
717 struct atmel_spi *as = spi_master_get_devdata(master);
718
719 if (as->fifo_size)
720 atmel_spi_next_xfer_fifo(master, xfer);
721 else
722 atmel_spi_next_xfer_single(master, xfer);
723}
724
725/*
726 * Submit next transfer for DMA.
727 */
728static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
729 struct spi_transfer *xfer,
730 u32 *plen)
731{
732 struct atmel_spi *as = spi_master_get_devdata(master);
733 struct dma_chan *rxchan = as->dma.chan_rx;
734 struct dma_chan *txchan = as->dma.chan_tx;
735 struct dma_async_tx_descriptor *rxdesc;
736 struct dma_async_tx_descriptor *txdesc;
737 struct dma_slave_config slave_config;
738 dma_cookie_t cookie;
739 u32 len = *plen;
740
741 dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_dma_submit\n");
742
743 /* Check that the channels are available */
744 if (!rxchan || !txchan)
745 return -ENODEV;
746
747 /* release lock for DMA operations */
748 atmel_spi_unlock(as);
749
750 /* prepare the RX dma transfer */
751 sg_init_table(&as->dma.sgrx, 1);
752 if (xfer->rx_buf) {
753 as->dma.sgrx.dma_address = xfer->rx_dma + xfer->len - *plen;
754 } else {
755 as->dma.sgrx.dma_address = as->buffer_dma;
756 if (len > BUFFER_SIZE)
757 len = BUFFER_SIZE;
758 }
759
760 /* prepare the TX dma transfer */
761 sg_init_table(&as->dma.sgtx, 1);
762 if (xfer->tx_buf) {
763 as->dma.sgtx.dma_address = xfer->tx_dma + xfer->len - *plen;
764 } else {
765 as->dma.sgtx.dma_address = as->buffer_dma;
766 if (len > BUFFER_SIZE)
767 len = BUFFER_SIZE;
768 memset(as->buffer, 0, len);
769 }
770
771 sg_dma_len(&as->dma.sgtx) = len;
772 sg_dma_len(&as->dma.sgrx) = len;
773
774 *plen = len;
775
776 if (atmel_spi_dma_slave_config(as, &slave_config,
777 xfer->bits_per_word))
778 goto err_exit;
779
780 /* Send both scatterlists */
781 rxdesc = dmaengine_prep_slave_sg(rxchan, &as->dma.sgrx, 1,
782 DMA_FROM_DEVICE,
783 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
784 if (!rxdesc)
785 goto err_dma;
786
787 txdesc = dmaengine_prep_slave_sg(txchan, &as->dma.sgtx, 1,
788 DMA_TO_DEVICE,
789 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
790 if (!txdesc)
791 goto err_dma;
792
793 dev_dbg(master->dev.parent,
794 " start dma xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
795 xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma,
796 xfer->rx_buf, (unsigned long long)xfer->rx_dma);
797
798 /* Enable relevant interrupts */
799 spi_writel(as, IER, SPI_BIT(OVRES));
800
801 /* Put the callback on the RX transfer only, that should finish last */
802 rxdesc->callback = dma_callback;
803 rxdesc->callback_param = master;
804
805 /* Submit and fire RX and TX with TX last so we're ready to read! */
806 cookie = rxdesc->tx_submit(rxdesc);
807 if (dma_submit_error(cookie))
808 goto err_dma;
809 cookie = txdesc->tx_submit(txdesc);
810 if (dma_submit_error(cookie))
811 goto err_dma;
812 rxchan->device->device_issue_pending(rxchan);
813 txchan->device->device_issue_pending(txchan);
814
815 /* take back lock */
816 atmel_spi_lock(as);
817 return 0;
818
819err_dma:
820 spi_writel(as, IDR, SPI_BIT(OVRES));
821 atmel_spi_stop_dma(as);
822err_exit:
823 atmel_spi_lock(as);
824 return -ENOMEM;
825}
826
827static void atmel_spi_next_xfer_data(struct spi_master *master,
828 struct spi_transfer *xfer,
829 dma_addr_t *tx_dma,
830 dma_addr_t *rx_dma,
831 u32 *plen)
832{
833 struct atmel_spi *as = spi_master_get_devdata(master);
834 u32 len = *plen;
835
836 /* use scratch buffer only when rx or tx data is unspecified */
837 if (xfer->rx_buf)
838 *rx_dma = xfer->rx_dma + xfer->len - *plen;
839 else {
840 *rx_dma = as->buffer_dma;
841 if (len > BUFFER_SIZE)
842 len = BUFFER_SIZE;
843 }
844
845 if (xfer->tx_buf)
846 *tx_dma = xfer->tx_dma + xfer->len - *plen;
847 else {
848 *tx_dma = as->buffer_dma;
849 if (len > BUFFER_SIZE)
850 len = BUFFER_SIZE;
851 memset(as->buffer, 0, len);
852 dma_sync_single_for_device(&as->pdev->dev,
853 as->buffer_dma, len, DMA_TO_DEVICE);
854 }
855
856 *plen = len;
857}
858
859static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
860 struct spi_device *spi,
861 struct spi_transfer *xfer)
862{
863 u32 scbr, csr;
864 unsigned long bus_hz;
865
866 /* v1 chips start out at half the peripheral bus speed. */
867 bus_hz = clk_get_rate(as->clk);
868 if (!atmel_spi_is_v2(as))
869 bus_hz /= 2;
870
871 /*
872 * Calculate the lowest divider that satisfies the
873 * constraint, assuming div32/fdiv/mbz == 0.
874 */
875 scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz);
876
877 /*
878 * If the resulting divider doesn't fit into the
879 * register bitfield, we can't satisfy the constraint.
880 */
881 if (scbr >= (1 << SPI_SCBR_SIZE)) {
882 dev_err(&spi->dev,
883 "setup: %d Hz too slow, scbr %u; min %ld Hz\n",
884 xfer->speed_hz, scbr, bus_hz/255);
885 return -EINVAL;
886 }
887 if (scbr == 0) {
888 dev_err(&spi->dev,
889 "setup: %d Hz too high, scbr %u; max %ld Hz\n",
890 xfer->speed_hz, scbr, bus_hz);
891 return -EINVAL;
892 }
893 csr = spi_readl(as, CSR0 + 4 * spi->chip_select);
894 csr = SPI_BFINS(SCBR, scbr, csr);
895 spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
896
897 return 0;
898}
899
900/*
901 * Submit next transfer for PDC.
902 * lock is held, spi irq is blocked
903 */
904static void atmel_spi_pdc_next_xfer(struct spi_master *master,
905 struct spi_message *msg,
906 struct spi_transfer *xfer)
907{
908 struct atmel_spi *as = spi_master_get_devdata(master);
909 u32 len;
910 dma_addr_t tx_dma, rx_dma;
911
912 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
913
914 len = as->current_remaining_bytes;
915 atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
916 as->current_remaining_bytes -= len;
917
918 spi_writel(as, RPR, rx_dma);
919 spi_writel(as, TPR, tx_dma);
920
921 if (msg->spi->bits_per_word > 8)
922 len >>= 1;
923 spi_writel(as, RCR, len);
924 spi_writel(as, TCR, len);
925
926 dev_dbg(&msg->spi->dev,
927 " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
928 xfer, xfer->len, xfer->tx_buf,
929 (unsigned long long)xfer->tx_dma, xfer->rx_buf,
930 (unsigned long long)xfer->rx_dma);
931
932 if (as->current_remaining_bytes) {
933 len = as->current_remaining_bytes;
934 atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
935 as->current_remaining_bytes -= len;
936
937 spi_writel(as, RNPR, rx_dma);
938 spi_writel(as, TNPR, tx_dma);
939
940 if (msg->spi->bits_per_word > 8)
941 len >>= 1;
942 spi_writel(as, RNCR, len);
943 spi_writel(as, TNCR, len);
944
945 dev_dbg(&msg->spi->dev,
946 " next xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
947 xfer, xfer->len, xfer->tx_buf,
948 (unsigned long long)xfer->tx_dma, xfer->rx_buf,
949 (unsigned long long)xfer->rx_dma);
950 }
951
952 /* REVISIT: We're waiting for RXBUFF before we start the next
953 * transfer because we need to handle some difficult timing
954 * issues otherwise. If we wait for TXBUFE in one transfer and
955 * then starts waiting for RXBUFF in the next, it's difficult
956 * to tell the difference between the RXBUFF interrupt we're
957 * actually waiting for and the RXBUFF interrupt of the
958 * previous transfer.
959 *
960 * It should be doable, though. Just not now...
961 */
962 spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
963 spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
964}
965
966/*
967 * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
968 * - The buffer is either valid for CPU access, else NULL
969 * - If the buffer is valid, so is its DMA address
970 *
971 * This driver manages the dma address unless message->is_dma_mapped.
972 */
973static int
974atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
975{
976 struct device *dev = &as->pdev->dev;
977
978 xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
979 if (xfer->tx_buf) {
980 /* tx_buf is a const void* where we need a void * for the dma
981 * mapping */
982 void *nonconst_tx = (void *)xfer->tx_buf;
983
984 xfer->tx_dma = dma_map_single(dev,
985 nonconst_tx, xfer->len,
986 DMA_TO_DEVICE);
987 if (dma_mapping_error(dev, xfer->tx_dma))
988 return -ENOMEM;
989 }
990 if (xfer->rx_buf) {
991 xfer->rx_dma = dma_map_single(dev,
992 xfer->rx_buf, xfer->len,
993 DMA_FROM_DEVICE);
994 if (dma_mapping_error(dev, xfer->rx_dma)) {
995 if (xfer->tx_buf)
996 dma_unmap_single(dev,
997 xfer->tx_dma, xfer->len,
998 DMA_TO_DEVICE);
999 return -ENOMEM;
1000 }
1001 }
1002 return 0;
1003}
1004
1005static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
1006 struct spi_transfer *xfer)
1007{
1008 if (xfer->tx_dma != INVALID_DMA_ADDRESS)
1009 dma_unmap_single(master->dev.parent, xfer->tx_dma,
1010 xfer->len, DMA_TO_DEVICE);
1011 if (xfer->rx_dma != INVALID_DMA_ADDRESS)
1012 dma_unmap_single(master->dev.parent, xfer->rx_dma,
1013 xfer->len, DMA_FROM_DEVICE);
1014}
1015
1016static void atmel_spi_disable_pdc_transfer(struct atmel_spi *as)
1017{
1018 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
1019}
1020
1021static void
1022atmel_spi_pump_single_data(struct atmel_spi *as, struct spi_transfer *xfer)
1023{
1024 u8 *rxp;
1025 u16 *rxp16;
1026 unsigned long xfer_pos = xfer->len - as->current_remaining_bytes;
1027
1028 if (xfer->rx_buf) {
1029 if (xfer->bits_per_word > 8) {
1030 rxp16 = (u16 *)(((u8 *)xfer->rx_buf) + xfer_pos);
1031 *rxp16 = spi_readl(as, RDR);
1032 } else {
1033 rxp = ((u8 *)xfer->rx_buf) + xfer_pos;
1034 *rxp = spi_readl(as, RDR);
1035 }
1036 } else {
1037 spi_readl(as, RDR);
1038 }
1039 if (xfer->bits_per_word > 8) {
1040 if (as->current_remaining_bytes > 2)
1041 as->current_remaining_bytes -= 2;
1042 else
1043 as->current_remaining_bytes = 0;
1044 } else {
1045 as->current_remaining_bytes--;
1046 }
1047}
1048
1049static void
1050atmel_spi_pump_fifo_data(struct atmel_spi *as, struct spi_transfer *xfer)
1051{
1052 u32 fifolr = spi_readl(as, FLR);
1053 u32 num_bytes, num_data = SPI_BFEXT(RXFL, fifolr);
1054 u32 offset = xfer->len - as->current_remaining_bytes;
1055 u16 *words = (u16 *)((u8 *)xfer->rx_buf + offset);
1056 u8 *bytes = (u8 *)((u8 *)xfer->rx_buf + offset);
1057 u16 rd; /* RD field is the lowest 16 bits of RDR */
1058
1059 /* Update the number of remaining bytes to transfer */
1060 num_bytes = ((xfer->bits_per_word > 8) ?
1061 (num_data << 1) :
1062 num_data);
1063
1064 if (as->current_remaining_bytes > num_bytes)
1065 as->current_remaining_bytes -= num_bytes;
1066 else
1067 as->current_remaining_bytes = 0;
1068
1069 /* Handle odd number of bytes when data are more than 8bit width */
1070 if (xfer->bits_per_word > 8)
1071 as->current_remaining_bytes &= ~0x1;
1072
1073 /* Read data */
1074 while (num_data) {
1075 rd = spi_readl(as, RDR);
1076 if (xfer->rx_buf) {
1077 if (xfer->bits_per_word > 8)
1078 *words++ = rd;
1079 else
1080 *bytes++ = rd;
1081 }
1082 num_data--;
1083 }
1084}
1085
1086/* Called from IRQ
1087 *
1088 * Must update "current_remaining_bytes" to keep track of data
1089 * to transfer.
1090 */
1091static void
1092atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
1093{
1094 if (as->fifo_size)
1095 atmel_spi_pump_fifo_data(as, xfer);
1096 else
1097 atmel_spi_pump_single_data(as, xfer);
1098}
1099
1100/* Interrupt
1101 *
1102 * No need for locking in this Interrupt handler: done_status is the
1103 * only information modified.
1104 */
1105static irqreturn_t
1106atmel_spi_pio_interrupt(int irq, void *dev_id)
1107{
1108 struct spi_master *master = dev_id;
1109 struct atmel_spi *as = spi_master_get_devdata(master);
1110 u32 status, pending, imr;
1111 struct spi_transfer *xfer;
1112 int ret = IRQ_NONE;
1113
1114 imr = spi_readl(as, IMR);
1115 status = spi_readl(as, SR);
1116 pending = status & imr;
1117
1118 if (pending & SPI_BIT(OVRES)) {
1119 ret = IRQ_HANDLED;
1120 spi_writel(as, IDR, SPI_BIT(OVRES));
1121 dev_warn(master->dev.parent, "overrun\n");
1122
1123 /*
1124 * When we get an overrun, we disregard the current
1125 * transfer. Data will not be copied back from any
1126 * bounce buffer and msg->actual_len will not be
1127 * updated with the last xfer.
1128 *
1129 * We will also not process any remaning transfers in
1130 * the message.
1131 */
1132 as->done_status = -EIO;
1133 smp_wmb();
1134
1135 /* Clear any overrun happening while cleaning up */
1136 spi_readl(as, SR);
1137
1138 complete(&as->xfer_completion);
1139
1140 } else if (pending & (SPI_BIT(RDRF) | SPI_BIT(RXFTHF))) {
1141 atmel_spi_lock(as);
1142
1143 if (as->current_remaining_bytes) {
1144 ret = IRQ_HANDLED;
1145 xfer = as->current_transfer;
1146 atmel_spi_pump_pio_data(as, xfer);
1147 if (!as->current_remaining_bytes)
1148 spi_writel(as, IDR, pending);
1149
1150 complete(&as->xfer_completion);
1151 }
1152
1153 atmel_spi_unlock(as);
1154 } else {
1155 WARN_ONCE(pending, "IRQ not handled, pending = %x\n", pending);
1156 ret = IRQ_HANDLED;
1157 spi_writel(as, IDR, pending);
1158 }
1159
1160 return ret;
1161}
1162
1163static irqreturn_t
1164atmel_spi_pdc_interrupt(int irq, void *dev_id)
1165{
1166 struct spi_master *master = dev_id;
1167 struct atmel_spi *as = spi_master_get_devdata(master);
1168 u32 status, pending, imr;
1169 int ret = IRQ_NONE;
1170
1171 imr = spi_readl(as, IMR);
1172 status = spi_readl(as, SR);
1173 pending = status & imr;
1174
1175 if (pending & SPI_BIT(OVRES)) {
1176
1177 ret = IRQ_HANDLED;
1178
1179 spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
1180 | SPI_BIT(OVRES)));
1181
1182 /* Clear any overrun happening while cleaning up */
1183 spi_readl(as, SR);
1184
1185 as->done_status = -EIO;
1186
1187 complete(&as->xfer_completion);
1188
1189 } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
1190 ret = IRQ_HANDLED;
1191
1192 spi_writel(as, IDR, pending);
1193
1194 complete(&as->xfer_completion);
1195 }
1196
1197 return ret;
1198}
1199
1200static int atmel_spi_setup(struct spi_device *spi)
1201{
1202 struct atmel_spi *as;
1203 struct atmel_spi_device *asd;
1204 u32 csr;
1205 unsigned int bits = spi->bits_per_word;
1206 unsigned int npcs_pin;
1207 int ret;
1208
1209 as = spi_master_get_devdata(spi->master);
1210
1211 /* see notes above re chipselect */
1212 if (!atmel_spi_is_v2(as)
1213 && spi->chip_select == 0
1214 && (spi->mode & SPI_CS_HIGH)) {
1215 dev_dbg(&spi->dev, "setup: can't be active-high\n");
1216 return -EINVAL;
1217 }
1218
1219 csr = SPI_BF(BITS, bits - 8);
1220 if (spi->mode & SPI_CPOL)
1221 csr |= SPI_BIT(CPOL);
1222 if (!(spi->mode & SPI_CPHA))
1223 csr |= SPI_BIT(NCPHA);
1224 if (!as->use_cs_gpios)
1225 csr |= SPI_BIT(CSAAT);
1226
1227 /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
1228 *
1229 * DLYBCT would add delays between words, slowing down transfers.
1230 * It could potentially be useful to cope with DMA bottlenecks, but
1231 * in those cases it's probably best to just use a lower bitrate.
1232 */
1233 csr |= SPI_BF(DLYBS, 0);
1234 csr |= SPI_BF(DLYBCT, 0);
1235
1236 /* chipselect must have been muxed as GPIO (e.g. in board setup) */
1237 npcs_pin = (unsigned long)spi->controller_data;
1238
1239 if (!as->use_cs_gpios)
1240 npcs_pin = spi->chip_select;
1241 else if (gpio_is_valid(spi->cs_gpio))
1242 npcs_pin = spi->cs_gpio;
1243
1244 asd = spi->controller_state;
1245 if (!asd) {
1246 asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
1247 if (!asd)
1248 return -ENOMEM;
1249
1250 if (as->use_cs_gpios) {
1251 ret = gpio_request(npcs_pin, dev_name(&spi->dev));
1252 if (ret) {
1253 kfree(asd);
1254 return ret;
1255 }
1256
1257 gpio_direction_output(npcs_pin,
1258 !(spi->mode & SPI_CS_HIGH));
1259 }
1260
1261 asd->npcs_pin = npcs_pin;
1262 spi->controller_state = asd;
1263 }
1264
1265 asd->csr = csr;
1266
1267 dev_dbg(&spi->dev,
1268 "setup: bpw %u mode 0x%x -> csr%d %08x\n",
1269 bits, spi->mode, spi->chip_select, csr);
1270
1271 if (!atmel_spi_is_v2(as))
1272 spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
1273
1274 return 0;
1275}
1276
1277static int atmel_spi_one_transfer(struct spi_master *master,
1278 struct spi_message *msg,
1279 struct spi_transfer *xfer)
1280{
1281 struct atmel_spi *as;
1282 struct spi_device *spi = msg->spi;
1283 u8 bits;
1284 u32 len;
1285 struct atmel_spi_device *asd;
1286 int timeout;
1287 int ret;
1288 unsigned long dma_timeout;
1289
1290 as = spi_master_get_devdata(master);
1291
1292 if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
1293 dev_dbg(&spi->dev, "missing rx or tx buf\n");
1294 return -EINVAL;
1295 }
1296
1297 asd = spi->controller_state;
1298 bits = (asd->csr >> 4) & 0xf;
1299 if (bits != xfer->bits_per_word - 8) {
1300 dev_dbg(&spi->dev,
1301 "you can't yet change bits_per_word in transfers\n");
1302 return -ENOPROTOOPT;
1303 }
1304
1305 /*
1306 * DMA map early, for performance (empties dcache ASAP) and
1307 * better fault reporting.
1308 */
1309 if ((!msg->is_dma_mapped)
1310 && (atmel_spi_use_dma(as, xfer) || as->use_pdc)) {
1311 if (atmel_spi_dma_map_xfer(as, xfer) < 0)
1312 return -ENOMEM;
1313 }
1314
1315 atmel_spi_set_xfer_speed(as, msg->spi, xfer);
1316
1317 as->done_status = 0;
1318 as->current_transfer = xfer;
1319 as->current_remaining_bytes = xfer->len;
1320 while (as->current_remaining_bytes) {
1321 reinit_completion(&as->xfer_completion);
1322
1323 if (as->use_pdc) {
1324 atmel_spi_pdc_next_xfer(master, msg, xfer);
1325 } else if (atmel_spi_use_dma(as, xfer)) {
1326 len = as->current_remaining_bytes;
1327 ret = atmel_spi_next_xfer_dma_submit(master,
1328 xfer, &len);
1329 if (ret) {
1330 dev_err(&spi->dev,
1331 "unable to use DMA, fallback to PIO\n");
1332 atmel_spi_next_xfer_pio(master, xfer);
1333 } else {
1334 as->current_remaining_bytes -= len;
1335 if (as->current_remaining_bytes < 0)
1336 as->current_remaining_bytes = 0;
1337 }
1338 } else {
1339 atmel_spi_next_xfer_pio(master, xfer);
1340 }
1341
1342 /* interrupts are disabled, so free the lock for schedule */
1343 atmel_spi_unlock(as);
1344 dma_timeout = wait_for_completion_timeout(&as->xfer_completion,
1345 SPI_DMA_TIMEOUT);
1346 atmel_spi_lock(as);
1347 if (WARN_ON(dma_timeout == 0)) {
1348 dev_err(&spi->dev, "spi transfer timeout\n");
1349 as->done_status = -EIO;
1350 }
1351
1352 if (as->done_status)
1353 break;
1354 }
1355
1356 if (as->done_status) {
1357 if (as->use_pdc) {
1358 dev_warn(master->dev.parent,
1359 "overrun (%u/%u remaining)\n",
1360 spi_readl(as, TCR), spi_readl(as, RCR));
1361
1362 /*
1363 * Clean up DMA registers and make sure the data
1364 * registers are empty.
1365 */
1366 spi_writel(as, RNCR, 0);
1367 spi_writel(as, TNCR, 0);
1368 spi_writel(as, RCR, 0);
1369 spi_writel(as, TCR, 0);
1370 for (timeout = 1000; timeout; timeout--)
1371 if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
1372 break;
1373 if (!timeout)
1374 dev_warn(master->dev.parent,
1375 "timeout waiting for TXEMPTY");
1376 while (spi_readl(as, SR) & SPI_BIT(RDRF))
1377 spi_readl(as, RDR);
1378
1379 /* Clear any overrun happening while cleaning up */
1380 spi_readl(as, SR);
1381
1382 } else if (atmel_spi_use_dma(as, xfer)) {
1383 atmel_spi_stop_dma(as);
1384 }
1385
1386 if (!msg->is_dma_mapped
1387 && (atmel_spi_use_dma(as, xfer) || as->use_pdc))
1388 atmel_spi_dma_unmap_xfer(master, xfer);
1389
1390 return 0;
1391
1392 } else {
1393 /* only update length if no error */
1394 msg->actual_length += xfer->len;
1395 }
1396
1397 if (!msg->is_dma_mapped
1398 && (atmel_spi_use_dma(as, xfer) || as->use_pdc))
1399 atmel_spi_dma_unmap_xfer(master, xfer);
1400
1401 if (xfer->delay_usecs)
1402 udelay(xfer->delay_usecs);
1403
1404 if (xfer->cs_change) {
1405 if (list_is_last(&xfer->transfer_list,
1406 &msg->transfers)) {
1407 as->keep_cs = true;
1408 } else {
1409 as->cs_active = !as->cs_active;
1410 if (as->cs_active)
1411 cs_activate(as, msg->spi);
1412 else
1413 cs_deactivate(as, msg->spi);
1414 }
1415 }
1416
1417 return 0;
1418}
1419
1420static int atmel_spi_transfer_one_message(struct spi_master *master,
1421 struct spi_message *msg)
1422{
1423 struct atmel_spi *as;
1424 struct spi_transfer *xfer;
1425 struct spi_device *spi = msg->spi;
1426 int ret = 0;
1427
1428 as = spi_master_get_devdata(master);
1429
1430 dev_dbg(&spi->dev, "new message %p submitted for %s\n",
1431 msg, dev_name(&spi->dev));
1432
1433 atmel_spi_lock(as);
1434 cs_activate(as, spi);
1435
1436 as->cs_active = true;
1437 as->keep_cs = false;
1438
1439 msg->status = 0;
1440 msg->actual_length = 0;
1441
1442 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1443 ret = atmel_spi_one_transfer(master, msg, xfer);
1444 if (ret)
1445 goto msg_done;
1446 }
1447
1448 if (as->use_pdc)
1449 atmel_spi_disable_pdc_transfer(as);
1450
1451 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1452 dev_dbg(&spi->dev,
1453 " xfer %p: len %u tx %p/%pad rx %p/%pad\n",
1454 xfer, xfer->len,
1455 xfer->tx_buf, &xfer->tx_dma,
1456 xfer->rx_buf, &xfer->rx_dma);
1457 }
1458
1459msg_done:
1460 if (!as->keep_cs)
1461 cs_deactivate(as, msg->spi);
1462
1463 atmel_spi_unlock(as);
1464
1465 msg->status = as->done_status;
1466 spi_finalize_current_message(spi->master);
1467
1468 return ret;
1469}
1470
1471static void atmel_spi_cleanup(struct spi_device *spi)
1472{
1473 struct atmel_spi_device *asd = spi->controller_state;
1474 unsigned gpio = (unsigned long) spi->controller_data;
1475
1476 if (!asd)
1477 return;
1478
1479 spi->controller_state = NULL;
1480 gpio_free(gpio);
1481 kfree(asd);
1482}
1483
1484static inline unsigned int atmel_get_version(struct atmel_spi *as)
1485{
1486 return spi_readl(as, VERSION) & 0x00000fff;
1487}
1488
1489static void atmel_get_caps(struct atmel_spi *as)
1490{
1491 unsigned int version;
1492
1493 version = atmel_get_version(as);
1494 dev_info(&as->pdev->dev, "version: 0x%x\n", version);
1495
1496 as->caps.is_spi2 = version > 0x121;
1497 as->caps.has_wdrbt = version >= 0x210;
1498 as->caps.has_dma_support = version >= 0x212;
1499}
1500
1501/*-------------------------------------------------------------------------*/
1502
1503static int atmel_spi_probe(struct platform_device *pdev)
1504{
1505 struct resource *regs;
1506 int irq;
1507 struct clk *clk;
1508 int ret;
1509 struct spi_master *master;
1510 struct atmel_spi *as;
1511
1512 /* Select default pin state */
1513 pinctrl_pm_select_default_state(&pdev->dev);
1514
1515 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1516 if (!regs)
1517 return -ENXIO;
1518
1519 irq = platform_get_irq(pdev, 0);
1520 if (irq < 0)
1521 return irq;
1522
1523 clk = devm_clk_get(&pdev->dev, "spi_clk");
1524 if (IS_ERR(clk))
1525 return PTR_ERR(clk);
1526
1527 /* setup spi core then atmel-specific driver state */
1528 ret = -ENOMEM;
1529 master = spi_alloc_master(&pdev->dev, sizeof(*as));
1530 if (!master)
1531 goto out_free;
1532
1533 /* the spi->mode bits understood by this driver: */
1534 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
1535 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 16);
1536 master->dev.of_node = pdev->dev.of_node;
1537 master->bus_num = pdev->id;
1538 master->num_chipselect = master->dev.of_node ? 0 : 4;
1539 master->setup = atmel_spi_setup;
1540 master->transfer_one_message = atmel_spi_transfer_one_message;
1541 master->cleanup = atmel_spi_cleanup;
1542 master->auto_runtime_pm = true;
1543 platform_set_drvdata(pdev, master);
1544
1545 as = spi_master_get_devdata(master);
1546
1547 /*
1548 * Scratch buffer is used for throwaway rx and tx data.
1549 * It's coherent to minimize dcache pollution.
1550 */
1551 as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
1552 &as->buffer_dma, GFP_KERNEL);
1553 if (!as->buffer)
1554 goto out_free;
1555
1556 spin_lock_init(&as->lock);
1557
1558 as->pdev = pdev;
1559 as->regs = devm_ioremap_resource(&pdev->dev, regs);
1560 if (IS_ERR(as->regs)) {
1561 ret = PTR_ERR(as->regs);
1562 goto out_free_buffer;
1563 }
1564 as->phybase = regs->start;
1565 as->irq = irq;
1566 as->clk = clk;
1567
1568 init_completion(&as->xfer_completion);
1569
1570 atmel_get_caps(as);
1571
1572 as->use_cs_gpios = true;
1573 if (atmel_spi_is_v2(as) &&
1574 pdev->dev.of_node &&
1575 !of_get_property(pdev->dev.of_node, "cs-gpios", NULL)) {
1576 as->use_cs_gpios = false;
1577 master->num_chipselect = 4;
1578 }
1579
1580 as->use_dma = false;
1581 as->use_pdc = false;
1582 if (as->caps.has_dma_support) {
1583 ret = atmel_spi_configure_dma(as);
1584 if (ret == 0)
1585 as->use_dma = true;
1586 else if (ret == -EPROBE_DEFER)
1587 return ret;
1588 } else {
1589 as->use_pdc = true;
1590 }
1591
1592 if (as->caps.has_dma_support && !as->use_dma)
1593 dev_info(&pdev->dev, "Atmel SPI Controller using PIO only\n");
1594
1595 if (as->use_pdc) {
1596 ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pdc_interrupt,
1597 0, dev_name(&pdev->dev), master);
1598 } else {
1599 ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pio_interrupt,
1600 0, dev_name(&pdev->dev), master);
1601 }
1602 if (ret)
1603 goto out_unmap_regs;
1604
1605 /* Initialize the hardware */
1606 ret = clk_prepare_enable(clk);
1607 if (ret)
1608 goto out_free_irq;
1609 spi_writel(as, CR, SPI_BIT(SWRST));
1610 spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1611 if (as->caps.has_wdrbt) {
1612 spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
1613 | SPI_BIT(MSTR));
1614 } else {
1615 spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
1616 }
1617
1618 if (as->use_pdc)
1619 spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
1620 spi_writel(as, CR, SPI_BIT(SPIEN));
1621
1622 as->fifo_size = 0;
1623 if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
1624 &as->fifo_size)) {
1625 dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size);
1626 spi_writel(as, CR, SPI_BIT(FIFOEN));
1627 }
1628
1629 /* go! */
1630 dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
1631 (unsigned long)regs->start, irq);
1632
1633 pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
1634 pm_runtime_use_autosuspend(&pdev->dev);
1635 pm_runtime_set_active(&pdev->dev);
1636 pm_runtime_enable(&pdev->dev);
1637
1638 ret = devm_spi_register_master(&pdev->dev, master);
1639 if (ret)
1640 goto out_free_dma;
1641
1642 return 0;
1643
1644out_free_dma:
1645 pm_runtime_disable(&pdev->dev);
1646 pm_runtime_set_suspended(&pdev->dev);
1647
1648 if (as->use_dma)
1649 atmel_spi_release_dma(as);
1650
1651 spi_writel(as, CR, SPI_BIT(SWRST));
1652 spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1653 clk_disable_unprepare(clk);
1654out_free_irq:
1655out_unmap_regs:
1656out_free_buffer:
1657 dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
1658 as->buffer_dma);
1659out_free:
1660 spi_master_put(master);
1661 return ret;
1662}
1663
1664static int atmel_spi_remove(struct platform_device *pdev)
1665{
1666 struct spi_master *master = platform_get_drvdata(pdev);
1667 struct atmel_spi *as = spi_master_get_devdata(master);
1668
1669 pm_runtime_get_sync(&pdev->dev);
1670
1671 /* reset the hardware and block queue progress */
1672 spin_lock_irq(&as->lock);
1673 if (as->use_dma) {
1674 atmel_spi_stop_dma(as);
1675 atmel_spi_release_dma(as);
1676 }
1677
1678 spi_writel(as, CR, SPI_BIT(SWRST));
1679 spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
1680 spi_readl(as, SR);
1681 spin_unlock_irq(&as->lock);
1682
1683 dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
1684 as->buffer_dma);
1685
1686 clk_disable_unprepare(as->clk);
1687
1688 pm_runtime_put_noidle(&pdev->dev);
1689 pm_runtime_disable(&pdev->dev);
1690
1691 return 0;
1692}
1693
1694#ifdef CONFIG_PM
1695static int atmel_spi_runtime_suspend(struct device *dev)
1696{
1697 struct spi_master *master = dev_get_drvdata(dev);
1698 struct atmel_spi *as = spi_master_get_devdata(master);
1699
1700 clk_disable_unprepare(as->clk);
1701 pinctrl_pm_select_sleep_state(dev);
1702
1703 return 0;
1704}
1705
1706static int atmel_spi_runtime_resume(struct device *dev)
1707{
1708 struct spi_master *master = dev_get_drvdata(dev);
1709 struct atmel_spi *as = spi_master_get_devdata(master);
1710
1711 pinctrl_pm_select_default_state(dev);
1712
1713 return clk_prepare_enable(as->clk);
1714}
1715
1716#ifdef CONFIG_PM_SLEEP
1717static int atmel_spi_suspend(struct device *dev)
1718{
1719 struct spi_master *master = dev_get_drvdata(dev);
1720 int ret;
1721
1722 /* Stop the queue running */
1723 ret = spi_master_suspend(master);
1724 if (ret) {
1725 dev_warn(dev, "cannot suspend master\n");
1726 return ret;
1727 }
1728
1729 if (!pm_runtime_suspended(dev))
1730 atmel_spi_runtime_suspend(dev);
1731
1732 return 0;
1733}
1734
1735static int atmel_spi_resume(struct device *dev)
1736{
1737 struct spi_master *master = dev_get_drvdata(dev);
1738 int ret;
1739
1740 if (!pm_runtime_suspended(dev)) {
1741 ret = atmel_spi_runtime_resume(dev);
1742 if (ret)
1743 return ret;
1744 }
1745
1746 /* Start the queue running */
1747 ret = spi_master_resume(master);
1748 if (ret)
1749 dev_err(dev, "problem starting queue (%d)\n", ret);
1750
1751 return ret;
1752}
1753#endif
1754
1755static const struct dev_pm_ops atmel_spi_pm_ops = {
1756 SET_SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume)
1757 SET_RUNTIME_PM_OPS(atmel_spi_runtime_suspend,
1758 atmel_spi_runtime_resume, NULL)
1759};
1760#define ATMEL_SPI_PM_OPS (&atmel_spi_pm_ops)
1761#else
1762#define ATMEL_SPI_PM_OPS NULL
1763#endif
1764
1765#if defined(CONFIG_OF)
1766static const struct of_device_id atmel_spi_dt_ids[] = {
1767 { .compatible = "atmel,at91rm9200-spi" },
1768 { /* sentinel */ }
1769};
1770
1771MODULE_DEVICE_TABLE(of, atmel_spi_dt_ids);
1772#endif
1773
1774static struct platform_driver atmel_spi_driver = {
1775 .driver = {
1776 .name = "atmel_spi",
1777 .pm = ATMEL_SPI_PM_OPS,
1778 .of_match_table = of_match_ptr(atmel_spi_dt_ids),
1779 },
1780 .probe = atmel_spi_probe,
1781 .remove = atmel_spi_remove,
1782};
1783module_platform_driver(atmel_spi_driver);
1784
1785MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
1786MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
1787MODULE_LICENSE("GPL");
1788MODULE_ALIAS("platform:atmel_spi");