Linux Audio

Check our new training course

Loading...
Note: File does not exist in v4.10.11.
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * Copyright (c) 2020 thingy.jp.
  4 * Author: Daniel Palmer <daniel@thingy.jp>
  5 */
  6
  7#include <dt-bindings/interrupt-controller/irq.h>
  8#include <dt-bindings/interrupt-controller/arm-gic.h>
  9#include <dt-bindings/clock/mstar-msc313-mpll.h>
 10
 11/ {
 12	#address-cells = <1>;
 13	#size-cells = <1>;
 14	interrupt-parent = <&gic>;
 15
 16	cpus: cpus {
 17		#address-cells = <1>;
 18		#size-cells = <0>;
 19
 20		cpu0: cpu@0 {
 21			device_type = "cpu";
 22			compatible = "arm,cortex-a7";
 23			reg = <0x0>;
 24			clocks = <&cpupll>;
 25			clock-names = "cpuclk";
 26		};
 27	};
 28
 29	arch_timer {
 30		compatible = "arm,armv7-timer";
 31		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2)
 32				| IRQ_TYPE_LEVEL_LOW)>,
 33			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2)
 34				| IRQ_TYPE_LEVEL_LOW)>,
 35			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2)
 36				| IRQ_TYPE_LEVEL_LOW)>,
 37			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2)
 38				| IRQ_TYPE_LEVEL_LOW)>;
 39		/*
 40		 * we shouldn't need this but the vendor
 41		 * u-boot is broken
 42		 */
 43		clock-frequency = <6000000>;
 44		arm,cpu-registers-not-fw-configured;
 45	};
 46
 47	pmu: pmu {
 48		compatible = "arm,cortex-a7-pmu";
 49		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 50		interrupt-affinity = <&cpu0>;
 51	};
 52
 53	clocks: clocks {
 54		xtal: xtal {
 55			#clock-cells = <0>;
 56			compatible = "fixed-clock";
 57			clock-frequency = <24000000>;
 58		};
 59
 60		rtc_xtal: rtc_xtal {
 61			#clock-cells = <0>;
 62			compatible = "fixed-clock";
 63			clock-frequency = <32768>;
 64			status = "disabled";
 65		};
 66
 67		xtal_div2: xtal_div2 {
 68			#clock-cells = <0>;
 69			compatible = "fixed-factor-clock";
 70			clocks = <&xtal>;
 71			clock-div = <2>;
 72			clock-mult = <1>;
 73		};
 74	};
 75
 76	soc: soc {
 77		compatible = "simple-bus";
 78		#address-cells = <1>;
 79		#size-cells = <1>;
 80		ranges = <0x16001000 0x16001000 0x00007000>,
 81			 <0x1f000000 0x1f000000 0x00400000>,
 82			 <0xa0000000 0xa0000000 0x20000>;
 83
 84		gic: interrupt-controller@16001000 {
 85			compatible = "arm,cortex-a7-gic";
 86			reg = <0x16001000 0x1000>,
 87			      <0x16002000 0x2000>,
 88			      <0x16004000 0x2000>,
 89			      <0x16006000 0x2000>;
 90			#interrupt-cells = <3>;
 91			interrupt-controller;
 92			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2)
 93					| IRQ_TYPE_LEVEL_LOW)>;
 94		};
 95
 96		riu: bus@1f000000 {
 97			compatible = "simple-bus";
 98			reg = <0x1f000000 0x00400000>;
 99			#address-cells = <1>;
100			#size-cells = <1>;
101			ranges = <0x0 0x1f000000 0x00400000>;
102
103			pmsleep: syscon@1c00 {
104				compatible = "mstar,msc313-pmsleep", "syscon";
105				reg = <0x1c00 0x100>;
106			};
107
108			reboot {
109				compatible = "syscon-reboot";
110				regmap = <&pmsleep>;
111				offset = <0xb8>;
112				mask = <0x79>;
113			};
114
115			rtc@2400 {
116				compatible = "mstar,msc313-rtc";
117				reg = <0x2400 0x40>;
118				clocks = <&xtal_div2>;
119				interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
120			};
121
122			watchdog@6000 {
123				compatible = "mstar,msc313e-wdt";
124				reg = <0x6000 0x1f>;
125				clocks = <&xtal_div2>;
126			};
127
128
129			intc_fiq: interrupt-controller@201310 {
130				compatible = "mstar,mst-intc";
131				reg = <0x201310 0x40>;
132				#interrupt-cells = <3>;
133				interrupt-controller;
134				interrupt-parent = <&gic>;
135				mstar,irqs-map-range = <96 127>;
136			};
137
138			intc_irq: interrupt-controller@201350 {
139				compatible = "mstar,mst-intc";
140				reg = <0x201350 0x40>;
141				#interrupt-cells = <3>;
142				interrupt-controller;
143				interrupt-parent = <&gic>;
144				mstar,irqs-map-range = <32 95>;
145				mstar,intc-no-eoi;
146			};
147
148			l3bridge: l3bridge@204400 {
149				compatible = "mstar,l3bridge";
150				reg = <0x204400 0x200>;
151			};
152
153			mpll: mpll@206000 {
154				compatible = "mstar,msc313-mpll";
155				#clock-cells = <1>;
156				reg = <0x206000 0x200>;
157				clocks = <&xtal>;
158			};
159
160			cpupll: cpupll@206400 {
161				compatible = "mstar,msc313-cpupll";
162				reg = <0x206400 0x200>;
163				#clock-cells = <0>;
164				clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
165			};
166
167			gpio: gpio@207800 {
168				#gpio-cells = <2>;
169				reg = <0x207800 0x200>;
170				gpio-controller;
171				#interrupt-cells = <2>;
172				interrupt-controller;
173				interrupt-parent = <&intc_fiq>;
174				status = "disabled";
175			};
176
177			pm_uart: uart@221000 {
178				compatible = "ns16550a";
179				reg = <0x221000 0x100>;
180				reg-shift = <3>;
181				interrupts-extended = <&intc_irq GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
182				clock-frequency = <172000000>;
183				status = "disabled";
184			};
185		};
186
187		imi: sram@a0000000 {
188			compatible = "mmio-sram";
189			reg = <0xa0000000 0x10000>;
190		};
191	};
192};