Linux Audio

Check our new training course

Loading...
v6.2
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * MPC512x PSC in SPI mode driver.
  4 *
  5 * Copyright (C) 2007,2008 Freescale Semiconductor Inc.
  6 * Original port from 52xx driver:
  7 *	Hongjun Chen <hong-jun.chen@freescale.com>
  8 *
  9 * Fork of mpc52xx_psc_spi.c:
 10 *	Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp
 
 
 
 
 
 11 */
 12
 13#include <linux/module.h>
 14#include <linux/kernel.h>
 15#include <linux/errno.h>
 16#include <linux/interrupt.h>
 17#include <linux/of_address.h>
 18#include <linux/of_irq.h>
 19#include <linux/of_platform.h>
 20#include <linux/completion.h>
 21#include <linux/io.h>
 22#include <linux/delay.h>
 23#include <linux/clk.h>
 24#include <linux/spi/spi.h>
 25#include <linux/fsl_devices.h>
 
 26#include <asm/mpc52xx_psc.h>
 27
 28enum {
 29	TYPE_MPC5121,
 30	TYPE_MPC5125,
 31};
 32
 33/*
 34 * This macro abstracts the differences in the PSC register layout between
 35 * MPC5121 (which uses a struct mpc52xx_psc) and MPC5125 (using mpc5125_psc).
 36 */
 37#define psc_addr(mps, regname) ({					\
 38	void *__ret = NULL;						\
 39	switch (mps->type) {						\
 40	case TYPE_MPC5121: {						\
 41			struct mpc52xx_psc __iomem *psc = mps->psc;	\
 42			__ret = &psc->regname;				\
 43		};							\
 44		break;							\
 45	case TYPE_MPC5125: {						\
 46			struct mpc5125_psc __iomem *psc = mps->psc;	\
 47			__ret = &psc->regname;				\
 48		};							\
 49		break;							\
 50	}								\
 51	__ret; })
 52
 53struct mpc512x_psc_spi {
 54	void (*cs_control)(struct spi_device *spi, bool on);
 55
 56	/* driver internal data */
 57	int type;
 58	void __iomem *psc;
 59	struct mpc512x_psc_fifo __iomem *fifo;
 60	unsigned int irq;
 61	u8 bits_per_word;
 62	struct clk *clk_mclk;
 63	struct clk *clk_ipg;
 64	u32 mclk_rate;
 65
 66	struct completion txisrdone;
 67};
 68
 69/* controller state */
 70struct mpc512x_psc_spi_cs {
 71	int bits_per_word;
 72	int speed_hz;
 73};
 74
 75/* set clock freq, clock ramp, bits per work
 76 * if t is NULL then reset the values to the default values
 77 */
 78static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi,
 79					  struct spi_transfer *t)
 80{
 81	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
 82
 83	cs->speed_hz = (t && t->speed_hz)
 84	    ? t->speed_hz : spi->max_speed_hz;
 85	cs->bits_per_word = (t && t->bits_per_word)
 86	    ? t->bits_per_word : spi->bits_per_word;
 87	cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8;
 88	return 0;
 89}
 90
 91static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
 92{
 93	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
 94	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
 95	u32 sicr;
 96	u32 ccr;
 97	int speed;
 98	u16 bclkdiv;
 99
100	sicr = in_be32(psc_addr(mps, sicr));
101
102	/* Set clock phase and polarity */
103	if (spi->mode & SPI_CPHA)
104		sicr |= 0x00001000;
105	else
106		sicr &= ~0x00001000;
107
108	if (spi->mode & SPI_CPOL)
109		sicr |= 0x00002000;
110	else
111		sicr &= ~0x00002000;
112
113	if (spi->mode & SPI_LSB_FIRST)
114		sicr |= 0x10000000;
115	else
116		sicr &= ~0x10000000;
117	out_be32(psc_addr(mps, sicr), sicr);
118
119	ccr = in_be32(psc_addr(mps, ccr));
120	ccr &= 0xFF000000;
121	speed = cs->speed_hz;
122	if (!speed)
123		speed = 1000000;	/* default 1MHz */
124	bclkdiv = (mps->mclk_rate / speed) - 1;
125
126	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
127	out_be32(psc_addr(mps, ccr), ccr);
128	mps->bits_per_word = cs->bits_per_word;
129
130	if (spi->cs_gpiod) {
131		if (mps->cs_control)
132			/* boardfile override */
133			mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0);
134		else
135			/* gpiolib will deal with the inversion */
136			gpiod_set_value(spi->cs_gpiod, 1);
137	}
138}
139
140static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi)
141{
142	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
143
144	if (spi->cs_gpiod) {
145		if (mps->cs_control)
146			/* boardfile override */
147			mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
148		else
149			/* gpiolib will deal with the inversion */
150			gpiod_set_value(spi->cs_gpiod, 0);
151	}
152}
153
154/* extract and scale size field in txsz or rxsz */
155#define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2);
156
157#define EOFBYTE 1
158
159static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi,
160					 struct spi_transfer *t)
161{
162	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
163	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
164	size_t tx_len = t->len;
165	size_t rx_len = t->len;
166	u8 *tx_buf = (u8 *)t->tx_buf;
167	u8 *rx_buf = (u8 *)t->rx_buf;
168
169	if (!tx_buf && !rx_buf && t->len)
170		return -EINVAL;
171
172	while (rx_len || tx_len) {
173		size_t txcount;
174		u8 data;
175		size_t fifosz;
176		size_t rxcount;
177		int rxtries;
178
179		/*
180		 * send the TX bytes in as large a chunk as possible
181		 * but neither exceed the TX nor the RX FIFOs
182		 */
183		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz));
184		txcount = min(fifosz, tx_len);
185		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->rxsz));
186		fifosz -= in_be32(&fifo->rxcnt) + 1;
187		txcount = min(fifosz, txcount);
188		if (txcount) {
189
190			/* fill the TX FIFO */
191			while (txcount-- > 0) {
192				data = tx_buf ? *tx_buf++ : 0;
193				if (tx_len == EOFBYTE && t->cs_change)
194					setbits32(&fifo->txcmd,
195						  MPC512x_PSC_FIFO_EOF);
196				out_8(&fifo->txdata_8, data);
197				tx_len--;
198			}
199
200			/* have the ISR trigger when the TX FIFO is empty */
201			reinit_completion(&mps->txisrdone);
202			out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
203			out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY);
204			wait_for_completion(&mps->txisrdone);
205		}
206
207		/*
208		 * consume as much RX data as the FIFO holds, while we
209		 * iterate over the transfer's TX data length
210		 *
211		 * only insist in draining all the remaining RX bytes
212		 * when the TX bytes were exhausted (that's at the very
213		 * end of this transfer, not when still iterating over
214		 * the transfer's chunks)
215		 */
216		rxtries = 50;
217		do {
218
219			/*
220			 * grab whatever was in the FIFO when we started
221			 * looking, don't bother fetching what was added to
222			 * the FIFO while we read from it -- we'll return
223			 * here eventually and prefer sending out remaining
224			 * TX data
225			 */
226			fifosz = in_be32(&fifo->rxcnt);
227			rxcount = min(fifosz, rx_len);
228			while (rxcount-- > 0) {
229				data = in_8(&fifo->rxdata_8);
230				if (rx_buf)
231					*rx_buf++ = data;
232				rx_len--;
233			}
234
235			/*
236			 * come back later if there still is TX data to send,
237			 * bail out of the RX drain loop if all of the TX data
238			 * was sent and all of the RX data was received (i.e.
239			 * when the transmission has completed)
240			 */
241			if (tx_len)
242				break;
243			if (!rx_len)
244				break;
245
246			/*
247			 * TX data transmission has completed while RX data
248			 * is still pending -- that's a transient situation
249			 * which depends on wire speed and specific
250			 * hardware implementation details (buffering) yet
251			 * should resolve very quickly
252			 *
253			 * just yield for a moment to not hog the CPU for
254			 * too long when running SPI at low speed
255			 *
256			 * the timeout range is rather arbitrary and tries
257			 * to balance throughput against system load; the
258			 * chosen values result in a minimal timeout of 50
259			 * times 10us and thus work at speeds as low as
260			 * some 20kbps, while the maximum timeout at the
261			 * transfer's end could be 5ms _if_ nothing else
262			 * ticks in the system _and_ RX data still wasn't
263			 * received, which only occurs in situations that
264			 * are exceptional; removing the unpredictability
265			 * of the timeout either decreases throughput
266			 * (longer timeouts), or puts more load on the
267			 * system (fixed short timeouts) or requires the
268			 * use of a timeout API instead of a counter and an
269			 * unknown inner delay
270			 */
271			usleep_range(10, 100);
272
273		} while (--rxtries > 0);
274		if (!tx_len && rx_len && !rxtries) {
275			/*
276			 * not enough RX bytes even after several retries
277			 * and the resulting rather long timeout?
278			 */
279			rxcount = in_be32(&fifo->rxcnt);
280			dev_warn(&spi->dev,
281				 "short xfer, missing %zd RX bytes, FIFO level %zd\n",
282				 rx_len, rxcount);
283		}
284
285		/*
286		 * drain and drop RX data which "should not be there" in
287		 * the first place, for undisturbed transmission this turns
288		 * into a NOP (except for the FIFO level fetch)
289		 */
290		if (!tx_len && !rx_len) {
291			while (in_be32(&fifo->rxcnt))
292				in_8(&fifo->rxdata_8);
293		}
294
295	}
296	return 0;
297}
298
299static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
300				    struct spi_message *m)
301{
302	struct spi_device *spi;
303	unsigned cs_change;
304	int status;
305	struct spi_transfer *t;
306
307	spi = m->spi;
308	cs_change = 1;
309	status = 0;
310	list_for_each_entry(t, &m->transfers, transfer_list) {
311		status = mpc512x_psc_spi_transfer_setup(spi, t);
312		if (status < 0)
313			break;
314
315		if (cs_change)
316			mpc512x_psc_spi_activate_cs(spi);
317		cs_change = t->cs_change;
318
319		status = mpc512x_psc_spi_transfer_rxtx(spi, t);
320		if (status)
321			break;
322		m->actual_length += t->len;
323
324		spi_transfer_delay_exec(t);
 
325
326		if (cs_change)
327			mpc512x_psc_spi_deactivate_cs(spi);
328	}
329
330	m->status = status;
331	if (m->complete)
332		m->complete(m->context);
333
334	if (status || !cs_change)
335		mpc512x_psc_spi_deactivate_cs(spi);
336
337	mpc512x_psc_spi_transfer_setup(spi, NULL);
338
339	spi_finalize_current_message(master);
340	return status;
341}
342
343static int mpc512x_psc_spi_prep_xfer_hw(struct spi_master *master)
344{
345	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
346
347	dev_dbg(&master->dev, "%s()\n", __func__);
348
349	/* Zero MR2 */
350	in_8(psc_addr(mps, mr2));
351	out_8(psc_addr(mps, mr2), 0x0);
352
353	/* enable transmitter/receiver */
354	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
355
356	return 0;
357}
358
359static int mpc512x_psc_spi_unprep_xfer_hw(struct spi_master *master)
360{
361	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
362	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
363
364	dev_dbg(&master->dev, "%s()\n", __func__);
365
366	/* disable transmitter/receiver and fifo interrupt */
367	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
368	out_be32(&fifo->tximr, 0);
369
370	return 0;
371}
372
373static int mpc512x_psc_spi_setup(struct spi_device *spi)
374{
375	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
 
376
377	if (spi->bits_per_word % 8)
378		return -EINVAL;
379
380	if (!cs) {
381		cs = kzalloc(sizeof(*cs), GFP_KERNEL);
382		if (!cs)
383			return -ENOMEM;
384
 
 
 
 
 
 
 
 
 
 
 
 
385		spi->controller_state = cs;
386	}
387
388	cs->bits_per_word = spi->bits_per_word;
389	cs->speed_hz = spi->max_speed_hz;
390
391	return 0;
392}
393
394static void mpc512x_psc_spi_cleanup(struct spi_device *spi)
395{
 
 
396	kfree(spi->controller_state);
397}
398
399static int mpc512x_psc_spi_port_config(struct spi_master *master,
400				       struct mpc512x_psc_spi *mps)
401{
402	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
403	u32 sicr;
404	u32 ccr;
405	int speed;
406	u16 bclkdiv;
407
408	/* Reset the PSC into a known state */
409	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_RX);
410	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_TX);
411	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
412
413	/* Disable psc interrupts all useful interrupts are in fifo */
414	out_be16(psc_addr(mps, isr_imr.imr), 0);
415
416	/* Disable fifo interrupts, will be enabled later */
417	out_be32(&fifo->tximr, 0);
418	out_be32(&fifo->rximr, 0);
419
420	/* Setup fifo slice address and size */
421	/*out_be32(&fifo->txsz, 0x0fe00004);*/
422	/*out_be32(&fifo->rxsz, 0x0ff00004);*/
423
424	sicr =	0x01000000 |	/* SIM = 0001 -- 8 bit */
425		0x00800000 |	/* GenClk = 1 -- internal clk */
426		0x00008000 |	/* SPI = 1 */
427		0x00004000 |	/* MSTR = 1   -- SPI master */
428		0x00000800;	/* UseEOF = 1 -- SS low until EOF */
429
430	out_be32(psc_addr(mps, sicr), sicr);
431
432	ccr = in_be32(psc_addr(mps, ccr));
433	ccr &= 0xFF000000;
434	speed = 1000000;	/* default 1MHz */
435	bclkdiv = (mps->mclk_rate / speed) - 1;
436	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
437	out_be32(psc_addr(mps, ccr), ccr);
438
439	/* Set 2ms DTL delay */
440	out_8(psc_addr(mps, ctur), 0x00);
441	out_8(psc_addr(mps, ctlr), 0x82);
442
443	/* we don't use the alarms */
444	out_be32(&fifo->rxalarm, 0xfff);
445	out_be32(&fifo->txalarm, 0);
446
447	/* Enable FIFO slices for Rx/Tx */
448	out_be32(&fifo->rxcmd,
449		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
450	out_be32(&fifo->txcmd,
451		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
452
453	mps->bits_per_word = 8;
454
455	return 0;
456}
457
458static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id)
459{
460	struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id;
461	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
462
463	/* clear interrupt and wake up the rx/tx routine */
464	if (in_be32(&fifo->txisr) &
465	    in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) {
466		out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
467		out_be32(&fifo->tximr, 0);
468		complete(&mps->txisrdone);
469		return IRQ_HANDLED;
470	}
471	return IRQ_NONE;
472}
473
 
 
 
 
 
474static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
475					      u32 size, unsigned int irq)
476{
477	struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
478	struct mpc512x_psc_spi *mps;
479	struct spi_master *master;
480	int ret;
481	void *tempp;
482	struct clk *clk;
483
484	master = spi_alloc_master(dev, sizeof(*mps));
485	if (master == NULL)
486		return -ENOMEM;
487
488	dev_set_drvdata(dev, master);
489	mps = spi_master_get_devdata(master);
490	mps->type = (int)of_device_get_match_data(dev);
491	mps->irq = irq;
492
493	if (pdata) {
 
 
494		mps->cs_control = pdata->cs_control;
495		master->bus_num = pdata->bus_num;
496		master->num_chipselect = pdata->max_chipselect;
497	}
498
499	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
500	master->setup = mpc512x_psc_spi_setup;
501	master->prepare_transfer_hardware = mpc512x_psc_spi_prep_xfer_hw;
502	master->transfer_one_message = mpc512x_psc_spi_msg_xfer;
503	master->unprepare_transfer_hardware = mpc512x_psc_spi_unprep_xfer_hw;
504	master->use_gpio_descriptors = true;
505	master->cleanup = mpc512x_psc_spi_cleanup;
506	master->dev.of_node = dev->of_node;
507
508	tempp = devm_ioremap(dev, regaddr, size);
509	if (!tempp) {
510		dev_err(dev, "could not ioremap I/O port range\n");
511		ret = -EFAULT;
512		goto free_master;
513	}
514	mps->psc = tempp;
515	mps->fifo =
516		(struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc));
517	ret = devm_request_irq(dev, mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED,
518				"mpc512x-psc-spi", mps);
519	if (ret)
520		goto free_master;
521	init_completion(&mps->txisrdone);
522
523	clk = devm_clk_get(dev, "mclk");
524	if (IS_ERR(clk)) {
525		ret = PTR_ERR(clk);
526		goto free_master;
527	}
528	ret = clk_prepare_enable(clk);
529	if (ret)
530		goto free_master;
531	mps->clk_mclk = clk;
532	mps->mclk_rate = clk_get_rate(clk);
533
534	clk = devm_clk_get(dev, "ipg");
535	if (IS_ERR(clk)) {
536		ret = PTR_ERR(clk);
537		goto free_mclk_clock;
538	}
539	ret = clk_prepare_enable(clk);
540	if (ret)
541		goto free_mclk_clock;
542	mps->clk_ipg = clk;
543
544	ret = mpc512x_psc_spi_port_config(master, mps);
545	if (ret < 0)
546		goto free_ipg_clock;
547
548	ret = devm_spi_register_master(dev, master);
549	if (ret < 0)
550		goto free_ipg_clock;
551
552	return ret;
553
554free_ipg_clock:
555	clk_disable_unprepare(mps->clk_ipg);
556free_mclk_clock:
557	clk_disable_unprepare(mps->clk_mclk);
558free_master:
559	spi_master_put(master);
560
561	return ret;
562}
563
564static int mpc512x_psc_spi_do_remove(struct device *dev)
565{
566	struct spi_master *master = dev_get_drvdata(dev);
567	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
568
569	clk_disable_unprepare(mps->clk_mclk);
570	clk_disable_unprepare(mps->clk_ipg);
571
572	return 0;
573}
574
575static int mpc512x_psc_spi_of_probe(struct platform_device *op)
576{
577	const u32 *regaddr_p;
578	u64 regaddr64, size64;
579
580	regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL);
581	if (!regaddr_p) {
582		dev_err(&op->dev, "Invalid PSC address\n");
583		return -EINVAL;
584	}
585	regaddr64 = of_translate_address(op->dev.of_node, regaddr_p);
586
587	return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64,
588				irq_of_parse_and_map(op->dev.of_node, 0));
589}
590
591static int mpc512x_psc_spi_of_remove(struct platform_device *op)
592{
593	return mpc512x_psc_spi_do_remove(&op->dev);
594}
595
596static const struct of_device_id mpc512x_psc_spi_of_match[] = {
597	{ .compatible = "fsl,mpc5121-psc-spi", .data = (void *)TYPE_MPC5121 },
598	{ .compatible = "fsl,mpc5125-psc-spi", .data = (void *)TYPE_MPC5125 },
599	{},
600};
601
602MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match);
603
604static struct platform_driver mpc512x_psc_spi_of_driver = {
605	.probe = mpc512x_psc_spi_of_probe,
606	.remove = mpc512x_psc_spi_of_remove,
607	.driver = {
608		.name = "mpc512x-psc-spi",
609		.of_match_table = mpc512x_psc_spi_of_match,
610	},
611};
612module_platform_driver(mpc512x_psc_spi_of_driver);
613
614MODULE_AUTHOR("John Rigby");
615MODULE_DESCRIPTION("MPC512x PSC SPI Driver");
616MODULE_LICENSE("GPL");
v4.10.11
 
  1/*
  2 * MPC512x PSC in SPI mode driver.
  3 *
  4 * Copyright (C) 2007,2008 Freescale Semiconductor Inc.
  5 * Original port from 52xx driver:
  6 *	Hongjun Chen <hong-jun.chen@freescale.com>
  7 *
  8 * Fork of mpc52xx_psc_spi.c:
  9 *	Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp
 10 *
 11 * This program is free software; you can redistribute  it and/or modify it
 12 * under  the terms of  the GNU General  Public License as published by the
 13 * Free Software Foundation;  either version 2 of the  License, or (at your
 14 * option) any later version.
 15 */
 16
 17#include <linux/module.h>
 18#include <linux/kernel.h>
 19#include <linux/errno.h>
 20#include <linux/interrupt.h>
 21#include <linux/of_address.h>
 22#include <linux/of_irq.h>
 23#include <linux/of_platform.h>
 24#include <linux/completion.h>
 25#include <linux/io.h>
 26#include <linux/delay.h>
 27#include <linux/clk.h>
 28#include <linux/spi/spi.h>
 29#include <linux/fsl_devices.h>
 30#include <linux/gpio.h>
 31#include <asm/mpc52xx_psc.h>
 32
 33enum {
 34	TYPE_MPC5121,
 35	TYPE_MPC5125,
 36};
 37
 38/*
 39 * This macro abstracts the differences in the PSC register layout between
 40 * MPC5121 (which uses a struct mpc52xx_psc) and MPC5125 (using mpc5125_psc).
 41 */
 42#define psc_addr(mps, regname) ({					\
 43	void *__ret = NULL;						\
 44	switch (mps->type) {						\
 45	case TYPE_MPC5121: {						\
 46			struct mpc52xx_psc __iomem *psc = mps->psc;	\
 47			__ret = &psc->regname;				\
 48		};							\
 49		break;							\
 50	case TYPE_MPC5125: {						\
 51			struct mpc5125_psc __iomem *psc = mps->psc;	\
 52			__ret = &psc->regname;				\
 53		};							\
 54		break;							\
 55	}								\
 56	__ret; })
 57
 58struct mpc512x_psc_spi {
 59	void (*cs_control)(struct spi_device *spi, bool on);
 60
 61	/* driver internal data */
 62	int type;
 63	void __iomem *psc;
 64	struct mpc512x_psc_fifo __iomem *fifo;
 65	unsigned int irq;
 66	u8 bits_per_word;
 67	struct clk *clk_mclk;
 68	struct clk *clk_ipg;
 69	u32 mclk_rate;
 70
 71	struct completion txisrdone;
 72};
 73
 74/* controller state */
 75struct mpc512x_psc_spi_cs {
 76	int bits_per_word;
 77	int speed_hz;
 78};
 79
 80/* set clock freq, clock ramp, bits per work
 81 * if t is NULL then reset the values to the default values
 82 */
 83static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi,
 84					  struct spi_transfer *t)
 85{
 86	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
 87
 88	cs->speed_hz = (t && t->speed_hz)
 89	    ? t->speed_hz : spi->max_speed_hz;
 90	cs->bits_per_word = (t && t->bits_per_word)
 91	    ? t->bits_per_word : spi->bits_per_word;
 92	cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8;
 93	return 0;
 94}
 95
 96static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
 97{
 98	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
 99	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
100	u32 sicr;
101	u32 ccr;
102	int speed;
103	u16 bclkdiv;
104
105	sicr = in_be32(psc_addr(mps, sicr));
106
107	/* Set clock phase and polarity */
108	if (spi->mode & SPI_CPHA)
109		sicr |= 0x00001000;
110	else
111		sicr &= ~0x00001000;
112
113	if (spi->mode & SPI_CPOL)
114		sicr |= 0x00002000;
115	else
116		sicr &= ~0x00002000;
117
118	if (spi->mode & SPI_LSB_FIRST)
119		sicr |= 0x10000000;
120	else
121		sicr &= ~0x10000000;
122	out_be32(psc_addr(mps, sicr), sicr);
123
124	ccr = in_be32(psc_addr(mps, ccr));
125	ccr &= 0xFF000000;
126	speed = cs->speed_hz;
127	if (!speed)
128		speed = 1000000;	/* default 1MHz */
129	bclkdiv = (mps->mclk_rate / speed) - 1;
130
131	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
132	out_be32(psc_addr(mps, ccr), ccr);
133	mps->bits_per_word = cs->bits_per_word;
134
135	if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
136		mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 1 : 0);
 
 
 
 
 
 
137}
138
139static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi)
140{
141	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
142
143	if (mps->cs_control && gpio_is_valid(spi->cs_gpio))
144		mps->cs_control(spi, (spi->mode & SPI_CS_HIGH) ? 0 : 1);
145
 
 
 
 
 
146}
147
148/* extract and scale size field in txsz or rxsz */
149#define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2);
150
151#define EOFBYTE 1
152
153static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi,
154					 struct spi_transfer *t)
155{
156	struct mpc512x_psc_spi *mps = spi_master_get_devdata(spi->master);
157	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
158	size_t tx_len = t->len;
159	size_t rx_len = t->len;
160	u8 *tx_buf = (u8 *)t->tx_buf;
161	u8 *rx_buf = (u8 *)t->rx_buf;
162
163	if (!tx_buf && !rx_buf && t->len)
164		return -EINVAL;
165
166	while (rx_len || tx_len) {
167		size_t txcount;
168		u8 data;
169		size_t fifosz;
170		size_t rxcount;
171		int rxtries;
172
173		/*
174		 * send the TX bytes in as large a chunk as possible
175		 * but neither exceed the TX nor the RX FIFOs
176		 */
177		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz));
178		txcount = min(fifosz, tx_len);
179		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->rxsz));
180		fifosz -= in_be32(&fifo->rxcnt) + 1;
181		txcount = min(fifosz, txcount);
182		if (txcount) {
183
184			/* fill the TX FIFO */
185			while (txcount-- > 0) {
186				data = tx_buf ? *tx_buf++ : 0;
187				if (tx_len == EOFBYTE && t->cs_change)
188					setbits32(&fifo->txcmd,
189						  MPC512x_PSC_FIFO_EOF);
190				out_8(&fifo->txdata_8, data);
191				tx_len--;
192			}
193
194			/* have the ISR trigger when the TX FIFO is empty */
195			reinit_completion(&mps->txisrdone);
196			out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
197			out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY);
198			wait_for_completion(&mps->txisrdone);
199		}
200
201		/*
202		 * consume as much RX data as the FIFO holds, while we
203		 * iterate over the transfer's TX data length
204		 *
205		 * only insist in draining all the remaining RX bytes
206		 * when the TX bytes were exhausted (that's at the very
207		 * end of this transfer, not when still iterating over
208		 * the transfer's chunks)
209		 */
210		rxtries = 50;
211		do {
212
213			/*
214			 * grab whatever was in the FIFO when we started
215			 * looking, don't bother fetching what was added to
216			 * the FIFO while we read from it -- we'll return
217			 * here eventually and prefer sending out remaining
218			 * TX data
219			 */
220			fifosz = in_be32(&fifo->rxcnt);
221			rxcount = min(fifosz, rx_len);
222			while (rxcount-- > 0) {
223				data = in_8(&fifo->rxdata_8);
224				if (rx_buf)
225					*rx_buf++ = data;
226				rx_len--;
227			}
228
229			/*
230			 * come back later if there still is TX data to send,
231			 * bail out of the RX drain loop if all of the TX data
232			 * was sent and all of the RX data was received (i.e.
233			 * when the transmission has completed)
234			 */
235			if (tx_len)
236				break;
237			if (!rx_len)
238				break;
239
240			/*
241			 * TX data transmission has completed while RX data
242			 * is still pending -- that's a transient situation
243			 * which depends on wire speed and specific
244			 * hardware implementation details (buffering) yet
245			 * should resolve very quickly
246			 *
247			 * just yield for a moment to not hog the CPU for
248			 * too long when running SPI at low speed
249			 *
250			 * the timeout range is rather arbitrary and tries
251			 * to balance throughput against system load; the
252			 * chosen values result in a minimal timeout of 50
253			 * times 10us and thus work at speeds as low as
254			 * some 20kbps, while the maximum timeout at the
255			 * transfer's end could be 5ms _if_ nothing else
256			 * ticks in the system _and_ RX data still wasn't
257			 * received, which only occurs in situations that
258			 * are exceptional; removing the unpredictability
259			 * of the timeout either decreases throughput
260			 * (longer timeouts), or puts more load on the
261			 * system (fixed short timeouts) or requires the
262			 * use of a timeout API instead of a counter and an
263			 * unknown inner delay
264			 */
265			usleep_range(10, 100);
266
267		} while (--rxtries > 0);
268		if (!tx_len && rx_len && !rxtries) {
269			/*
270			 * not enough RX bytes even after several retries
271			 * and the resulting rather long timeout?
272			 */
273			rxcount = in_be32(&fifo->rxcnt);
274			dev_warn(&spi->dev,
275				 "short xfer, missing %zd RX bytes, FIFO level %zd\n",
276				 rx_len, rxcount);
277		}
278
279		/*
280		 * drain and drop RX data which "should not be there" in
281		 * the first place, for undisturbed transmission this turns
282		 * into a NOP (except for the FIFO level fetch)
283		 */
284		if (!tx_len && !rx_len) {
285			while (in_be32(&fifo->rxcnt))
286				in_8(&fifo->rxdata_8);
287		}
288
289	}
290	return 0;
291}
292
293static int mpc512x_psc_spi_msg_xfer(struct spi_master *master,
294				    struct spi_message *m)
295{
296	struct spi_device *spi;
297	unsigned cs_change;
298	int status;
299	struct spi_transfer *t;
300
301	spi = m->spi;
302	cs_change = 1;
303	status = 0;
304	list_for_each_entry(t, &m->transfers, transfer_list) {
305		status = mpc512x_psc_spi_transfer_setup(spi, t);
306		if (status < 0)
307			break;
308
309		if (cs_change)
310			mpc512x_psc_spi_activate_cs(spi);
311		cs_change = t->cs_change;
312
313		status = mpc512x_psc_spi_transfer_rxtx(spi, t);
314		if (status)
315			break;
316		m->actual_length += t->len;
317
318		if (t->delay_usecs)
319			udelay(t->delay_usecs);
320
321		if (cs_change)
322			mpc512x_psc_spi_deactivate_cs(spi);
323	}
324
325	m->status = status;
326	if (m->complete)
327		m->complete(m->context);
328
329	if (status || !cs_change)
330		mpc512x_psc_spi_deactivate_cs(spi);
331
332	mpc512x_psc_spi_transfer_setup(spi, NULL);
333
334	spi_finalize_current_message(master);
335	return status;
336}
337
338static int mpc512x_psc_spi_prep_xfer_hw(struct spi_master *master)
339{
340	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
341
342	dev_dbg(&master->dev, "%s()\n", __func__);
343
344	/* Zero MR2 */
345	in_8(psc_addr(mps, mr2));
346	out_8(psc_addr(mps, mr2), 0x0);
347
348	/* enable transmitter/receiver */
349	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
350
351	return 0;
352}
353
354static int mpc512x_psc_spi_unprep_xfer_hw(struct spi_master *master)
355{
356	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
357	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
358
359	dev_dbg(&master->dev, "%s()\n", __func__);
360
361	/* disable transmitter/receiver and fifo interrupt */
362	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
363	out_be32(&fifo->tximr, 0);
364
365	return 0;
366}
367
368static int mpc512x_psc_spi_setup(struct spi_device *spi)
369{
370	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
371	int ret;
372
373	if (spi->bits_per_word % 8)
374		return -EINVAL;
375
376	if (!cs) {
377		cs = kzalloc(sizeof *cs, GFP_KERNEL);
378		if (!cs)
379			return -ENOMEM;
380
381		if (gpio_is_valid(spi->cs_gpio)) {
382			ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
383			if (ret) {
384				dev_err(&spi->dev, "can't get CS gpio: %d\n",
385					ret);
386				kfree(cs);
387				return ret;
388			}
389			gpio_direction_output(spi->cs_gpio,
390					spi->mode & SPI_CS_HIGH ? 0 : 1);
391		}
392
393		spi->controller_state = cs;
394	}
395
396	cs->bits_per_word = spi->bits_per_word;
397	cs->speed_hz = spi->max_speed_hz;
398
399	return 0;
400}
401
402static void mpc512x_psc_spi_cleanup(struct spi_device *spi)
403{
404	if (gpio_is_valid(spi->cs_gpio))
405		gpio_free(spi->cs_gpio);
406	kfree(spi->controller_state);
407}
408
409static int mpc512x_psc_spi_port_config(struct spi_master *master,
410				       struct mpc512x_psc_spi *mps)
411{
412	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
413	u32 sicr;
414	u32 ccr;
415	int speed;
416	u16 bclkdiv;
417
418	/* Reset the PSC into a known state */
419	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_RX);
420	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_TX);
421	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
422
423	/* Disable psc interrupts all useful interrupts are in fifo */
424	out_be16(psc_addr(mps, isr_imr.imr), 0);
425
426	/* Disable fifo interrupts, will be enabled later */
427	out_be32(&fifo->tximr, 0);
428	out_be32(&fifo->rximr, 0);
429
430	/* Setup fifo slice address and size */
431	/*out_be32(&fifo->txsz, 0x0fe00004);*/
432	/*out_be32(&fifo->rxsz, 0x0ff00004);*/
433
434	sicr =	0x01000000 |	/* SIM = 0001 -- 8 bit */
435		0x00800000 |	/* GenClk = 1 -- internal clk */
436		0x00008000 |	/* SPI = 1 */
437		0x00004000 |	/* MSTR = 1   -- SPI master */
438		0x00000800;	/* UseEOF = 1 -- SS low until EOF */
439
440	out_be32(psc_addr(mps, sicr), sicr);
441
442	ccr = in_be32(psc_addr(mps, ccr));
443	ccr &= 0xFF000000;
444	speed = 1000000;	/* default 1MHz */
445	bclkdiv = (mps->mclk_rate / speed) - 1;
446	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
447	out_be32(psc_addr(mps, ccr), ccr);
448
449	/* Set 2ms DTL delay */
450	out_8(psc_addr(mps, ctur), 0x00);
451	out_8(psc_addr(mps, ctlr), 0x82);
452
453	/* we don't use the alarms */
454	out_be32(&fifo->rxalarm, 0xfff);
455	out_be32(&fifo->txalarm, 0);
456
457	/* Enable FIFO slices for Rx/Tx */
458	out_be32(&fifo->rxcmd,
459		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
460	out_be32(&fifo->txcmd,
461		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
462
463	mps->bits_per_word = 8;
464
465	return 0;
466}
467
468static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id)
469{
470	struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id;
471	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
472
473	/* clear interrupt and wake up the rx/tx routine */
474	if (in_be32(&fifo->txisr) &
475	    in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) {
476		out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
477		out_be32(&fifo->tximr, 0);
478		complete(&mps->txisrdone);
479		return IRQ_HANDLED;
480	}
481	return IRQ_NONE;
482}
483
484static void mpc512x_spi_cs_control(struct spi_device *spi, bool onoff)
485{
486	gpio_set_value(spi->cs_gpio, onoff);
487}
488
489static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
490					      u32 size, unsigned int irq)
491{
492	struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
493	struct mpc512x_psc_spi *mps;
494	struct spi_master *master;
495	int ret;
496	void *tempp;
497	struct clk *clk;
498
499	master = spi_alloc_master(dev, sizeof *mps);
500	if (master == NULL)
501		return -ENOMEM;
502
503	dev_set_drvdata(dev, master);
504	mps = spi_master_get_devdata(master);
505	mps->type = (int)of_device_get_match_data(dev);
506	mps->irq = irq;
507
508	if (pdata == NULL) {
509		mps->cs_control = mpc512x_spi_cs_control;
510	} else {
511		mps->cs_control = pdata->cs_control;
512		master->bus_num = pdata->bus_num;
513		master->num_chipselect = pdata->max_chipselect;
514	}
515
516	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
517	master->setup = mpc512x_psc_spi_setup;
518	master->prepare_transfer_hardware = mpc512x_psc_spi_prep_xfer_hw;
519	master->transfer_one_message = mpc512x_psc_spi_msg_xfer;
520	master->unprepare_transfer_hardware = mpc512x_psc_spi_unprep_xfer_hw;
 
521	master->cleanup = mpc512x_psc_spi_cleanup;
522	master->dev.of_node = dev->of_node;
523
524	tempp = devm_ioremap(dev, regaddr, size);
525	if (!tempp) {
526		dev_err(dev, "could not ioremap I/O port range\n");
527		ret = -EFAULT;
528		goto free_master;
529	}
530	mps->psc = tempp;
531	mps->fifo =
532		(struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc));
533	ret = devm_request_irq(dev, mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED,
534				"mpc512x-psc-spi", mps);
535	if (ret)
536		goto free_master;
537	init_completion(&mps->txisrdone);
538
539	clk = devm_clk_get(dev, "mclk");
540	if (IS_ERR(clk)) {
541		ret = PTR_ERR(clk);
542		goto free_master;
543	}
544	ret = clk_prepare_enable(clk);
545	if (ret)
546		goto free_master;
547	mps->clk_mclk = clk;
548	mps->mclk_rate = clk_get_rate(clk);
549
550	clk = devm_clk_get(dev, "ipg");
551	if (IS_ERR(clk)) {
552		ret = PTR_ERR(clk);
553		goto free_mclk_clock;
554	}
555	ret = clk_prepare_enable(clk);
556	if (ret)
557		goto free_mclk_clock;
558	mps->clk_ipg = clk;
559
560	ret = mpc512x_psc_spi_port_config(master, mps);
561	if (ret < 0)
562		goto free_ipg_clock;
563
564	ret = devm_spi_register_master(dev, master);
565	if (ret < 0)
566		goto free_ipg_clock;
567
568	return ret;
569
570free_ipg_clock:
571	clk_disable_unprepare(mps->clk_ipg);
572free_mclk_clock:
573	clk_disable_unprepare(mps->clk_mclk);
574free_master:
575	spi_master_put(master);
576
577	return ret;
578}
579
580static int mpc512x_psc_spi_do_remove(struct device *dev)
581{
582	struct spi_master *master = dev_get_drvdata(dev);
583	struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
584
585	clk_disable_unprepare(mps->clk_mclk);
586	clk_disable_unprepare(mps->clk_ipg);
587
588	return 0;
589}
590
591static int mpc512x_psc_spi_of_probe(struct platform_device *op)
592{
593	const u32 *regaddr_p;
594	u64 regaddr64, size64;
595
596	regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL);
597	if (!regaddr_p) {
598		dev_err(&op->dev, "Invalid PSC address\n");
599		return -EINVAL;
600	}
601	regaddr64 = of_translate_address(op->dev.of_node, regaddr_p);
602
603	return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64,
604				irq_of_parse_and_map(op->dev.of_node, 0));
605}
606
607static int mpc512x_psc_spi_of_remove(struct platform_device *op)
608{
609	return mpc512x_psc_spi_do_remove(&op->dev);
610}
611
612static const struct of_device_id mpc512x_psc_spi_of_match[] = {
613	{ .compatible = "fsl,mpc5121-psc-spi", .data = (void *)TYPE_MPC5121 },
614	{ .compatible = "fsl,mpc5125-psc-spi", .data = (void *)TYPE_MPC5125 },
615	{},
616};
617
618MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match);
619
620static struct platform_driver mpc512x_psc_spi_of_driver = {
621	.probe = mpc512x_psc_spi_of_probe,
622	.remove = mpc512x_psc_spi_of_remove,
623	.driver = {
624		.name = "mpc512x-psc-spi",
625		.of_match_table = mpc512x_psc_spi_of_match,
626	},
627};
628module_platform_driver(mpc512x_psc_spi_of_driver);
629
630MODULE_AUTHOR("John Rigby");
631MODULE_DESCRIPTION("MPC512x PSC SPI Driver");
632MODULE_LICENSE("GPL");