Linux Audio

Check our new training course

Loading...
v6.2
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2/*
  3 *  linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
  4 *
  5 * Header file for Host Controller registers and I/O accessors.
  6 *
  7 *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
 
 
 
 
 
  8 */
  9#ifndef __SDHCI_HW_H
 10#define __SDHCI_HW_H
 11
 12#include <linux/bits.h>
 13#include <linux/scatterlist.h>
 14#include <linux/compiler.h>
 15#include <linux/types.h>
 16#include <linux/io.h>
 17#include <linux/leds.h>
 18#include <linux/interrupt.h>
 19
 20#include <linux/mmc/host.h>
 21
 22/*
 23 * Controller registers
 24 */
 25
 26#define SDHCI_DMA_ADDRESS	0x00
 27#define SDHCI_ARGUMENT2		SDHCI_DMA_ADDRESS
 28#define SDHCI_32BIT_BLK_CNT	SDHCI_DMA_ADDRESS
 29
 30#define SDHCI_BLOCK_SIZE	0x04
 31#define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
 32
 33#define SDHCI_BLOCK_COUNT	0x06
 34
 35#define SDHCI_ARGUMENT		0x08
 36
 37#define SDHCI_TRANSFER_MODE	0x0C
 38#define  SDHCI_TRNS_DMA		0x01
 39#define  SDHCI_TRNS_BLK_CNT_EN	0x02
 40#define  SDHCI_TRNS_AUTO_CMD12	0x04
 41#define  SDHCI_TRNS_AUTO_CMD23	0x08
 42#define  SDHCI_TRNS_AUTO_SEL	0x0C
 43#define  SDHCI_TRNS_READ	0x10
 44#define  SDHCI_TRNS_MULTI	0x20
 45
 46#define SDHCI_COMMAND		0x0E
 47#define  SDHCI_CMD_RESP_MASK	0x03
 48#define  SDHCI_CMD_CRC		0x08
 49#define  SDHCI_CMD_INDEX	0x10
 50#define  SDHCI_CMD_DATA		0x20
 51#define  SDHCI_CMD_ABORTCMD	0xC0
 52
 53#define  SDHCI_CMD_RESP_NONE	0x00
 54#define  SDHCI_CMD_RESP_LONG	0x01
 55#define  SDHCI_CMD_RESP_SHORT	0x02
 56#define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
 57
 58#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
 59#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
 60
 61#define SDHCI_RESPONSE		0x10
 62
 63#define SDHCI_BUFFER		0x20
 64
 65#define SDHCI_PRESENT_STATE	0x24
 66#define  SDHCI_CMD_INHIBIT	0x00000001
 67#define  SDHCI_DATA_INHIBIT	0x00000002
 68#define  SDHCI_DOING_WRITE	0x00000100
 69#define  SDHCI_DOING_READ	0x00000200
 70#define  SDHCI_SPACE_AVAILABLE	0x00000400
 71#define  SDHCI_DATA_AVAILABLE	0x00000800
 72#define  SDHCI_CARD_PRESENT	0x00010000
 73#define   SDHCI_CARD_PRES_SHIFT	16
 74#define  SDHCI_CD_STABLE	0x00020000
 75#define  SDHCI_CD_LVL		0x00040000
 76#define   SDHCI_CD_LVL_SHIFT	18
 77#define  SDHCI_WRITE_PROTECT	0x00080000
 78#define  SDHCI_DATA_LVL_MASK	0x00F00000
 79#define   SDHCI_DATA_LVL_SHIFT	20
 80#define   SDHCI_DATA_0_LVL_MASK	0x00100000
 81#define  SDHCI_CMD_LVL		0x01000000
 82
 83#define SDHCI_HOST_CONTROL	0x28
 84#define  SDHCI_CTRL_LED		0x01
 85#define  SDHCI_CTRL_4BITBUS	0x02
 86#define  SDHCI_CTRL_HISPD	0x04
 87#define  SDHCI_CTRL_DMA_MASK	0x18
 88#define   SDHCI_CTRL_SDMA	0x00
 89#define   SDHCI_CTRL_ADMA1	0x08
 90#define   SDHCI_CTRL_ADMA32	0x10
 91#define   SDHCI_CTRL_ADMA64	0x18
 92#define   SDHCI_CTRL_ADMA3	0x18
 93#define  SDHCI_CTRL_8BITBUS	0x20
 94#define  SDHCI_CTRL_CDTEST_INS	0x40
 95#define  SDHCI_CTRL_CDTEST_EN	0x80
 96
 97#define SDHCI_POWER_CONTROL	0x29
 98#define  SDHCI_POWER_ON		0x01
 99#define  SDHCI_POWER_180	0x0A
100#define  SDHCI_POWER_300	0x0C
101#define  SDHCI_POWER_330	0x0E
102
103#define SDHCI_BLOCK_GAP_CONTROL	0x2A
104
105#define SDHCI_WAKE_UP_CONTROL	0x2B
106#define  SDHCI_WAKE_ON_INT	0x01
107#define  SDHCI_WAKE_ON_INSERT	0x02
108#define  SDHCI_WAKE_ON_REMOVE	0x04
109
110#define SDHCI_CLOCK_CONTROL	0x2C
111#define  SDHCI_DIVIDER_SHIFT	8
112#define  SDHCI_DIVIDER_HI_SHIFT	6
113#define  SDHCI_DIV_MASK	0xFF
114#define  SDHCI_DIV_MASK_LEN	8
115#define  SDHCI_DIV_HI_MASK	0x300
116#define  SDHCI_PROG_CLOCK_MODE	0x0020
117#define  SDHCI_CLOCK_CARD_EN	0x0004
118#define  SDHCI_CLOCK_PLL_EN	0x0008
119#define  SDHCI_CLOCK_INT_STABLE	0x0002
120#define  SDHCI_CLOCK_INT_EN	0x0001
121
122#define SDHCI_TIMEOUT_CONTROL	0x2E
123
124#define SDHCI_SOFTWARE_RESET	0x2F
125#define  SDHCI_RESET_ALL	0x01
126#define  SDHCI_RESET_CMD	0x02
127#define  SDHCI_RESET_DATA	0x04
128
129#define SDHCI_INT_STATUS	0x30
130#define SDHCI_INT_ENABLE	0x34
131#define SDHCI_SIGNAL_ENABLE	0x38
132#define  SDHCI_INT_RESPONSE	0x00000001
133#define  SDHCI_INT_DATA_END	0x00000002
134#define  SDHCI_INT_BLK_GAP	0x00000004
135#define  SDHCI_INT_DMA_END	0x00000008
136#define  SDHCI_INT_SPACE_AVAIL	0x00000010
137#define  SDHCI_INT_DATA_AVAIL	0x00000020
138#define  SDHCI_INT_CARD_INSERT	0x00000040
139#define  SDHCI_INT_CARD_REMOVE	0x00000080
140#define  SDHCI_INT_CARD_INT	0x00000100
141#define  SDHCI_INT_RETUNE	0x00001000
142#define  SDHCI_INT_CQE		0x00004000
143#define  SDHCI_INT_ERROR	0x00008000
144#define  SDHCI_INT_TIMEOUT	0x00010000
145#define  SDHCI_INT_CRC		0x00020000
146#define  SDHCI_INT_END_BIT	0x00040000
147#define  SDHCI_INT_INDEX	0x00080000
148#define  SDHCI_INT_DATA_TIMEOUT	0x00100000
149#define  SDHCI_INT_DATA_CRC	0x00200000
150#define  SDHCI_INT_DATA_END_BIT	0x00400000
151#define  SDHCI_INT_BUS_POWER	0x00800000
152#define  SDHCI_INT_AUTO_CMD_ERR	0x01000000
153#define  SDHCI_INT_ADMA_ERROR	0x02000000
154
155#define  SDHCI_INT_NORMAL_MASK	0x00007FFF
156#define  SDHCI_INT_ERROR_MASK	0xFFFF8000
157
158#define  SDHCI_INT_CMD_MASK	(SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
159		SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \
160		SDHCI_INT_AUTO_CMD_ERR)
161#define  SDHCI_INT_DATA_MASK	(SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
162		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
163		SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
164		SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
165		SDHCI_INT_BLK_GAP)
166#define SDHCI_INT_ALL_MASK	((unsigned int)-1)
167
168#define SDHCI_CQE_INT_ERR_MASK ( \
169	SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \
170	SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \
171	SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)
172
173#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE)
174
175#define SDHCI_AUTO_CMD_STATUS	0x3C
176#define  SDHCI_AUTO_CMD_TIMEOUT	0x00000002
177#define  SDHCI_AUTO_CMD_CRC	0x00000004
178#define  SDHCI_AUTO_CMD_END_BIT	0x00000008
179#define  SDHCI_AUTO_CMD_INDEX	0x00000010
180
181#define SDHCI_HOST_CONTROL2		0x3E
182#define  SDHCI_CTRL_UHS_MASK		0x0007
183#define   SDHCI_CTRL_UHS_SDR12		0x0000
184#define   SDHCI_CTRL_UHS_SDR25		0x0001
185#define   SDHCI_CTRL_UHS_SDR50		0x0002
186#define   SDHCI_CTRL_UHS_SDR104		0x0003
187#define   SDHCI_CTRL_UHS_DDR50		0x0004
188#define   SDHCI_CTRL_HS400		0x0005 /* Non-standard */
189#define  SDHCI_CTRL_VDD_180		0x0008
190#define  SDHCI_CTRL_DRV_TYPE_MASK	0x0030
191#define   SDHCI_CTRL_DRV_TYPE_B		0x0000
192#define   SDHCI_CTRL_DRV_TYPE_A		0x0010
193#define   SDHCI_CTRL_DRV_TYPE_C		0x0020
194#define   SDHCI_CTRL_DRV_TYPE_D		0x0030
195#define  SDHCI_CTRL_EXEC_TUNING		0x0040
196#define  SDHCI_CTRL_TUNED_CLK		0x0080
197#define  SDHCI_CMD23_ENABLE		0x0800
198#define  SDHCI_CTRL_V4_MODE		0x1000
199#define  SDHCI_CTRL_64BIT_ADDR		0x2000
200#define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000
201
202#define SDHCI_CAPABILITIES	0x40
203#define  SDHCI_TIMEOUT_CLK_MASK		GENMASK(5, 0)
204#define  SDHCI_TIMEOUT_CLK_SHIFT 0
205#define  SDHCI_TIMEOUT_CLK_UNIT	0x00000080
206#define  SDHCI_CLOCK_BASE_MASK		GENMASK(13, 8)
 
207#define  SDHCI_CLOCK_BASE_SHIFT	8
208#define  SDHCI_CLOCK_V3_BASE_MASK	GENMASK(15, 8)
209#define  SDHCI_MAX_BLOCK_MASK	0x00030000
210#define  SDHCI_MAX_BLOCK_SHIFT  16
211#define  SDHCI_CAN_DO_8BIT	0x00040000
212#define  SDHCI_CAN_DO_ADMA2	0x00080000
213#define  SDHCI_CAN_DO_ADMA1	0x00100000
214#define  SDHCI_CAN_DO_HISPD	0x00200000
215#define  SDHCI_CAN_DO_SDMA	0x00400000
216#define  SDHCI_CAN_DO_SUSPEND	0x00800000
217#define  SDHCI_CAN_VDD_330	0x01000000
218#define  SDHCI_CAN_VDD_300	0x02000000
219#define  SDHCI_CAN_VDD_180	0x04000000
220#define  SDHCI_CAN_64BIT_V4	0x08000000
221#define  SDHCI_CAN_64BIT	0x10000000
222
223#define SDHCI_CAPABILITIES_1	0x44
224#define  SDHCI_SUPPORT_SDR50	0x00000001
225#define  SDHCI_SUPPORT_SDR104	0x00000002
226#define  SDHCI_SUPPORT_DDR50	0x00000004
227#define  SDHCI_DRIVER_TYPE_A	0x00000010
228#define  SDHCI_DRIVER_TYPE_C	0x00000020
229#define  SDHCI_DRIVER_TYPE_D	0x00000040
230#define  SDHCI_RETUNING_TIMER_COUNT_MASK	GENMASK(11, 8)
 
231#define  SDHCI_USE_SDR50_TUNING			0x00002000
232#define  SDHCI_RETUNING_MODE_MASK		GENMASK(15, 14)
233#define  SDHCI_CLOCK_MUL_MASK			GENMASK(23, 16)
234#define  SDHCI_CAN_DO_ADMA3	0x08000000
235#define  SDHCI_SUPPORT_HS400	0x80000000 /* Non-standard */
 
 
236
237#define SDHCI_MAX_CURRENT		0x48
238#define  SDHCI_MAX_CURRENT_LIMIT	GENMASK(7, 0)
239#define  SDHCI_MAX_CURRENT_330_MASK	GENMASK(7, 0)
240#define  SDHCI_MAX_CURRENT_300_MASK	GENMASK(15, 8)
241#define  SDHCI_MAX_CURRENT_180_MASK	GENMASK(23, 16)
 
 
242#define   SDHCI_MAX_CURRENT_MULTIPLIER	4
243
244/* 4C-4F reserved for more max current */
245
246#define SDHCI_SET_ACMD12_ERROR	0x50
247#define SDHCI_SET_INT_ERROR	0x52
248
249#define SDHCI_ADMA_ERROR	0x54
250
251/* 55-57 reserved */
252
253#define SDHCI_ADMA_ADDRESS	0x58
254#define SDHCI_ADMA_ADDRESS_HI	0x5C
255
256/* 60-FB reserved */
257
258#define SDHCI_PRESET_FOR_HIGH_SPEED	0x64
259#define SDHCI_PRESET_FOR_SDR12 0x66
260#define SDHCI_PRESET_FOR_SDR25 0x68
261#define SDHCI_PRESET_FOR_SDR50 0x6A
262#define SDHCI_PRESET_FOR_SDR104        0x6C
263#define SDHCI_PRESET_FOR_DDR50 0x6E
264#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
265#define SDHCI_PRESET_DRV_MASK		GENMASK(15, 14)
266#define SDHCI_PRESET_CLKGEN_SEL		BIT(10)
267#define SDHCI_PRESET_SDCLK_FREQ_MASK	GENMASK(9, 0)
268
269#define SDHCI_SLOT_INT_STATUS	0xFC
270
271#define SDHCI_HOST_VERSION	0xFE
272#define  SDHCI_VENDOR_VER_MASK	0xFF00
273#define  SDHCI_VENDOR_VER_SHIFT	8
274#define  SDHCI_SPEC_VER_MASK	0x00FF
275#define  SDHCI_SPEC_VER_SHIFT	0
276#define   SDHCI_SPEC_100	0
277#define   SDHCI_SPEC_200	1
278#define   SDHCI_SPEC_300	2
279#define   SDHCI_SPEC_400	3
280#define   SDHCI_SPEC_410	4
281#define   SDHCI_SPEC_420	5
282
283/*
284 * End of controller registers.
285 */
286
287#define SDHCI_MAX_DIV_SPEC_200	256
288#define SDHCI_MAX_DIV_SPEC_300	2046
289
290/*
291 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
292 */
293#define SDHCI_DEFAULT_BOUNDARY_SIZE  (512 * 1024)
294#define SDHCI_DEFAULT_BOUNDARY_ARG   (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
295
296/* ADMA2 32-bit DMA descriptor size */
297#define SDHCI_ADMA2_32_DESC_SZ	8
298
299/* ADMA2 32-bit descriptor */
300struct sdhci_adma2_32_desc {
301	__le16	cmd;
302	__le16	len;
303	__le32	addr;
304}  __packed __aligned(4);
305
306/* ADMA2 data alignment */
307#define SDHCI_ADMA2_ALIGN	4
308#define SDHCI_ADMA2_MASK	(SDHCI_ADMA2_ALIGN - 1)
309
310/*
311 * ADMA2 descriptor alignment.  Some controllers (e.g. Intel) require 8 byte
312 * alignment for the descriptor table even in 32-bit DMA mode.  Memory
313 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
314 */
315#define SDHCI_ADMA2_DESC_ALIGN	8
316
317/*
318 * ADMA2 64-bit DMA descriptor size
319 * According to SD Host Controller spec v4.10, there are two kinds of
320 * descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit
321 * Descriptor, if Host Version 4 Enable is set in the Host Control 2
322 * register, 128-bit Descriptor will be selected.
323 */
324#define SDHCI_ADMA2_64_DESC_SZ(host)	((host)->v4_mode ? 16 : 12)
325
326/*
327 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
328 * aligned.
329 */
330struct sdhci_adma2_64_desc {
331	__le16	cmd;
332	__le16	len;
333	__le32	addr_lo;
334	__le32	addr_hi;
335}  __packed __aligned(4);
336
337#define ADMA2_TRAN_VALID	0x21
338#define ADMA2_NOP_END_VALID	0x3
339#define ADMA2_END		0x2
340
341/*
342 * Maximum segments assuming a 512KiB maximum requisition size and a minimum
343 * 4KiB page size. Note this also allows enough for multiple descriptors in
344 * case of PAGE_SIZE >= 64KiB.
345 */
346#define SDHCI_MAX_SEGS		128
347
348/* Allow for a command request and a data request at the same time */
349#define SDHCI_MAX_MRQS		2
350
351/*
352 * 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms.
353 * However since the start time of the command, the time between
354 * command and response, and the time between response and start of data is
355 * not known, set the command transfer time to 10ms.
356 */
357#define MMC_CMD_TRANSFER_TIME	(10 * NSEC_PER_MSEC) /* max 10 ms */
358
359#define sdhci_err_stats_inc(host, err_name) \
360	mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name)
361
362enum sdhci_cookie {
363	COOKIE_UNMAPPED,
364	COOKIE_PRE_MAPPED,	/* mapped by sdhci_pre_req() */
365	COOKIE_MAPPED,		/* mapped by sdhci_prepare_data() */
366};
367
368struct sdhci_host {
369	/* Data set by hardware interface driver */
370	const char *hw_name;	/* Hardware bus name */
371
372	unsigned int quirks;	/* Deviations from spec. */
373
374/* Controller doesn't honor resets unless we touch the clock register */
375#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
376/* Controller has bad caps bits, but really supports DMA */
377#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
378/* Controller doesn't like to be reset when there is no card inserted. */
379#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
380/* Controller doesn't like clearing the power reg before a change */
381#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
382/* Controller has an unusable DMA engine */
383#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
384/* Controller has an unusable ADMA engine */
385#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
386/* Controller can only DMA from 32-bit aligned addresses */
387#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
388/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
389#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
390/* Controller can only ADMA chunks that are a multiple of 32 bits */
391#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
392/* Controller needs to be reset after each request to stay stable */
393#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
394/* Controller needs voltage and power writes to happen separately */
395#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
396/* Controller provides an incorrect timeout value for transfers */
397#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
398/* Controller has an issue with buffer bits for small transfers */
399#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
400/* Controller does not provide transfer-complete interrupt when not busy */
401#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
402/* Controller has unreliable card detection */
403#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
404/* Controller reports inverted write-protect state */
405#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
406/* Controller has unusable command queue engine */
407#define SDHCI_QUIRK_BROKEN_CQE				(1<<17)
408/* Controller does not like fast PIO transfers */
409#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
410/* Controller does not have a LED */
411#define SDHCI_QUIRK_NO_LED				(1<<19)
412/* Controller has to be forced to use block size of 2048 bytes */
413#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
414/* Controller cannot do multi-block transfers */
415#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
416/* Controller can only handle 1-bit data transfers */
417#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
418/* Controller needs 10ms delay between applying power and clock */
419#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
420/* Controller uses SDCLK instead of TMCLK for data timeouts */
421#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
422/* Controller reports wrong base clock capability */
423#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
424/* Controller cannot support End Attribute in NOP ADMA descriptor */
425#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
426/* Controller is missing device caps. Use caps provided by host */
427#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
428/* Controller uses Auto CMD12 command to stop the transfer */
429#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
430/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
431#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
432/* Controller treats ADMA descriptors with length 0000h incorrectly */
433#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1<<30)
434/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
435#define SDHCI_QUIRK_UNSTABLE_RO_DETECT			(1<<31)
436
437	unsigned int quirks2;	/* More deviations from spec. */
438
439#define SDHCI_QUIRK2_HOST_OFF_CARD_ON			(1<<0)
440#define SDHCI_QUIRK2_HOST_NO_CMD23			(1<<1)
441/* The system physically doesn't support 1.8v, even if the host does */
442#define SDHCI_QUIRK2_NO_1_8_V				(1<<2)
443#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN		(1<<3)
444#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON		(1<<4)
445/* Controller has a non-standard host control register */
446#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
447/* Controller does not support HS200 */
448#define SDHCI_QUIRK2_BROKEN_HS200			(1<<6)
449/* Controller does not support DDR50 */
450#define SDHCI_QUIRK2_BROKEN_DDR50			(1<<7)
451/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
452#define SDHCI_QUIRK2_STOP_WITH_TC			(1<<8)
453/* Controller does not support 64-bit DMA */
454#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA			(1<<9)
455/* need clear transfer mode register before send cmd */
456#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD	(1<<10)
457/* Capability register bit-63 indicates HS400 support */
458#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400		(1<<11)
459/* forced tuned clock */
460#define SDHCI_QUIRK2_TUNING_WORK_AROUND			(1<<12)
461/* disable the block count for single block transactions */
462#define SDHCI_QUIRK2_SUPPORT_SINGLE			(1<<13)
463/* Controller broken with using ACMD23 */
464#define SDHCI_QUIRK2_ACMD23_BROKEN			(1<<14)
465/* Broken Clock divider zero in controller */
466#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN		(1<<15)
467/* Controller has CRC in 136 bit Command Response */
468#define SDHCI_QUIRK2_RSP_136_HAS_CRC			(1<<16)
469/*
470 * Disable HW timeout if the requested timeout is more than the maximum
471 * obtainable timeout.
472 */
473#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT			(1<<17)
474/*
475 * 32-bit block count may not support eMMC where upper bits of CMD23 are used
476 * for other purposes.  Consequently we support 16-bit block count by default.
477 * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit
478 * block count.
479 */
480#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT			(1<<18)
481/* Issue CMD and DATA reset together */
482#define SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER	(1<<19)
483
484	int irq;		/* Device IRQ */
485	void __iomem *ioaddr;	/* Mapped address */
486	phys_addr_t mapbase;	/* physical address base */
487	char *bounce_buffer;	/* For packing SDMA reads/writes */
488	dma_addr_t bounce_addr;
489	unsigned int bounce_buffer_size;
490
491	const struct sdhci_ops *ops;	/* Low level hw interface */
492
493	/* Internal data */
494	struct mmc_host *mmc;	/* MMC structure */
495	struct mmc_host_ops mmc_host_ops;	/* MMC host ops */
496	u64 dma_mask;		/* custom DMA mask */
497
498#if IS_ENABLED(CONFIG_LEDS_CLASS)
499	struct led_classdev led;	/* LED control */
500	char led_name[32];
501#endif
502
503	spinlock_t lock;	/* Mutex */
504
505	int flags;		/* Host attributes */
506#define SDHCI_USE_SDMA		(1<<0)	/* Host is SDMA capable */
507#define SDHCI_USE_ADMA		(1<<1)	/* Host is ADMA capable */
508#define SDHCI_REQ_USE_DMA	(1<<2)	/* Use DMA for this req. */
509#define SDHCI_DEVICE_DEAD	(1<<3)	/* Device unresponsive */
510#define SDHCI_SDR50_NEEDS_TUNING (1<<4)	/* SDR50 needs tuning */
511#define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
512#define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
513#define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
514#define SDHCI_USE_64_BIT_DMA	(1<<12)	/* Use 64-bit DMA */
515#define SDHCI_HS400_TUNING	(1<<13)	/* Tuning for HS400 */
516#define SDHCI_SIGNALING_330	(1<<14)	/* Host is capable of 3.3V signaling */
517#define SDHCI_SIGNALING_180	(1<<15)	/* Host is capable of 1.8V signaling */
518#define SDHCI_SIGNALING_120	(1<<16)	/* Host is capable of 1.2V signaling */
519
520	unsigned int version;	/* SDHCI spec. version */
521
522	unsigned int max_clk;	/* Max possible freq (MHz) */
523	unsigned int timeout_clk;	/* Timeout freq (KHz) */
524	u8 max_timeout_count;	/* Vendor specific max timeout count */
525	unsigned int clk_mul;	/* Clock Muliplier value */
526
527	unsigned int clock;	/* Current clock (MHz) */
528	u8 pwr;			/* Current voltage */
529	u8 drv_type;		/* Current UHS-I driver type */
530	bool reinit_uhs;	/* Force UHS-related re-initialization */
531
532	bool runtime_suspended;	/* Host is runtime suspended */
533	bool bus_on;		/* Bus power prevents runtime suspend */
534	bool preset_enabled;	/* Preset is enabled */
535	bool pending_reset;	/* Cmd/data reset is pending */
536	bool irq_wake_enabled;	/* IRQ wakeup is enabled */
537	bool v4_mode;		/* Host Version 4 Enable */
538	bool use_external_dma;	/* Host selects to use external DMA */
539	bool always_defer_done;	/* Always defer to complete requests */
540
541	struct mmc_request *mrqs_done[SDHCI_MAX_MRQS];	/* Requests done */
542	struct mmc_command *cmd;	/* Current command */
543	struct mmc_command *data_cmd;	/* Current data command */
544	struct mmc_command *deferred_cmd;	/* Deferred command */
545	struct mmc_data *data;	/* Current data request */
546	unsigned int data_early:1;	/* Data finished before cmd */
547
548	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
549	unsigned int blocks;	/* remaining PIO blocks */
550
551	int sg_count;		/* Mapped sg entries */
552	int max_adma;		/* Max. length in ADMA descriptor */
553
554	void *adma_table;	/* ADMA descriptor table */
555	void *align_buffer;	/* Bounce buffer */
556
557	size_t adma_table_sz;	/* ADMA descriptor table size */
558	size_t align_buffer_sz;	/* Bounce buffer size */
559
560	dma_addr_t adma_addr;	/* Mapped ADMA descr. table */
561	dma_addr_t align_addr;	/* Mapped bounce buffer */
562
563	unsigned int desc_sz;	/* ADMA current descriptor size */
564	unsigned int alloc_desc_sz;	/* ADMA descr. max size host supports */
565
566	struct workqueue_struct *complete_wq;	/* Request completion wq */
567	struct work_struct	complete_work;	/* Request completion work */
568
569	struct timer_list timer;	/* Timer for timeouts */
570	struct timer_list data_timer;	/* Timer for data timeouts */
571
572#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
573	struct dma_chan *rx_chan;
574	struct dma_chan *tx_chan;
575#endif
576
577	u32 caps;		/* CAPABILITY_0 */
578	u32 caps1;		/* CAPABILITY_1 */
579	bool read_caps;		/* Capability flags have been read */
580
581	bool sdhci_core_to_disable_vqmmc;  /* sdhci core can disable vqmmc */
582	unsigned int            ocr_avail_sdio;	/* OCR bit masks */
583	unsigned int            ocr_avail_sd;
584	unsigned int            ocr_avail_mmc;
585	u32 ocr_mask;		/* available voltages */
586
587	unsigned		timing;		/* Current timing */
588
589	u32			thread_isr;
590
591	/* cached registers */
592	u32			ier;
593
594	bool			cqe_on;		/* CQE is operating */
595	u32			cqe_ier;	/* CQE interrupt mask */
596	u32			cqe_err_ier;	/* CQE error interrupt mask */
597
598	wait_queue_head_t	buf_ready_int;	/* Waitqueue for Buffer Read Ready interrupt */
599	unsigned int		tuning_done;	/* Condition flag set when CMD19 succeeds */
600
601	unsigned int		tuning_count;	/* Timer count for re-tuning */
602	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
603	unsigned int		tuning_err;	/* Error code for re-tuning */
604#define SDHCI_TUNING_MODE_1	0
605#define SDHCI_TUNING_MODE_2	1
606#define SDHCI_TUNING_MODE_3	2
607	/* Delay (ms) between tuning commands */
608	int			tuning_delay;
609	int			tuning_loop_count;
610
611	/* Host SDMA buffer boundary. */
612	u32			sdma_boundary;
613
614	/* Host ADMA table count */
615	u32			adma_table_cnt;
616
617	u64			data_timeout;
618
619	unsigned long private[] ____cacheline_aligned;
620};
621
622struct sdhci_ops {
623#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
624	u32		(*read_l)(struct sdhci_host *host, int reg);
625	u16		(*read_w)(struct sdhci_host *host, int reg);
626	u8		(*read_b)(struct sdhci_host *host, int reg);
627	void		(*write_l)(struct sdhci_host *host, u32 val, int reg);
628	void		(*write_w)(struct sdhci_host *host, u16 val, int reg);
629	void		(*write_b)(struct sdhci_host *host, u8 val, int reg);
630#endif
631
632	void	(*set_clock)(struct sdhci_host *host, unsigned int clock);
633	void	(*set_power)(struct sdhci_host *host, unsigned char mode,
634			     unsigned short vdd);
635
636	u32		(*irq)(struct sdhci_host *host, u32 intmask);
637
638	int		(*set_dma_mask)(struct sdhci_host *host);
639	int		(*enable_dma)(struct sdhci_host *host);
640	unsigned int	(*get_max_clock)(struct sdhci_host *host);
641	unsigned int	(*get_min_clock)(struct sdhci_host *host);
642	/* get_timeout_clock should return clk rate in unit of Hz */
643	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
644	unsigned int	(*get_max_timeout_count)(struct sdhci_host *host);
645	void		(*set_timeout)(struct sdhci_host *host,
646				       struct mmc_command *cmd);
647	void		(*set_bus_width)(struct sdhci_host *host, int width);
648	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
649					     u8 power_mode);
650	unsigned int    (*get_ro)(struct sdhci_host *host);
651	void		(*reset)(struct sdhci_host *host, u8 mask);
652	int	(*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
653	void	(*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
654	void	(*hw_reset)(struct sdhci_host *host);
655	void    (*adma_workaround)(struct sdhci_host *host, u32 intmask);
656	void    (*card_event)(struct sdhci_host *host);
657	void	(*voltage_switch)(struct sdhci_host *host);
658	void	(*adma_write_desc)(struct sdhci_host *host, void **desc,
659				   dma_addr_t addr, int len, unsigned int cmd);
660	void	(*copy_to_bounce_buffer)(struct sdhci_host *host,
661					 struct mmc_data *data,
662					 unsigned int length);
663	void	(*request_done)(struct sdhci_host *host,
664				struct mmc_request *mrq);
665	void    (*dump_vendor_regs)(struct sdhci_host *host);
666};
667
668#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
669
670static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
671{
672	if (unlikely(host->ops->write_l))
673		host->ops->write_l(host, val, reg);
674	else
675		writel(val, host->ioaddr + reg);
676}
677
678static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
679{
680	if (unlikely(host->ops->write_w))
681		host->ops->write_w(host, val, reg);
682	else
683		writew(val, host->ioaddr + reg);
684}
685
686static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
687{
688	if (unlikely(host->ops->write_b))
689		host->ops->write_b(host, val, reg);
690	else
691		writeb(val, host->ioaddr + reg);
692}
693
694static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
695{
696	if (unlikely(host->ops->read_l))
697		return host->ops->read_l(host, reg);
698	else
699		return readl(host->ioaddr + reg);
700}
701
702static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
703{
704	if (unlikely(host->ops->read_w))
705		return host->ops->read_w(host, reg);
706	else
707		return readw(host->ioaddr + reg);
708}
709
710static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
711{
712	if (unlikely(host->ops->read_b))
713		return host->ops->read_b(host, reg);
714	else
715		return readb(host->ioaddr + reg);
716}
717
718#else
719
720static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
721{
722	writel(val, host->ioaddr + reg);
723}
724
725static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
726{
727	writew(val, host->ioaddr + reg);
728}
729
730static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
731{
732	writeb(val, host->ioaddr + reg);
733}
734
735static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
736{
737	return readl(host->ioaddr + reg);
738}
739
740static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
741{
742	return readw(host->ioaddr + reg);
743}
744
745static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
746{
747	return readb(host->ioaddr + reg);
748}
749
750#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
751
752struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size);
753void sdhci_free_host(struct sdhci_host *host);
 
754
755static inline void *sdhci_priv(struct sdhci_host *host)
756{
757	return host->private;
758}
759
760void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver,
761		       const u32 *caps, const u32 *caps1);
762int sdhci_setup_host(struct sdhci_host *host);
763void sdhci_cleanup_host(struct sdhci_host *host);
764int __sdhci_add_host(struct sdhci_host *host);
765int sdhci_add_host(struct sdhci_host *host);
766void sdhci_remove_host(struct sdhci_host *host, int dead);
767
768static inline void sdhci_read_caps(struct sdhci_host *host)
769{
770	__sdhci_read_caps(host, NULL, NULL, NULL);
771}
772
773u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
774		   unsigned int *actual_clock);
775void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
776void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
777void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
778		     unsigned short vdd);
779void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
780				     unsigned char mode,
781				     unsigned short vdd);
782void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
783			   unsigned short vdd);
784int sdhci_get_cd_nogpio(struct mmc_host *mmc);
785void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
786int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
787void sdhci_set_bus_width(struct sdhci_host *host, int width);
788void sdhci_reset(struct sdhci_host *host, u8 mask);
789void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
790int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
791void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
792int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
793				      struct mmc_ios *ios);
794void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
795void sdhci_adma_write_desc(struct sdhci_host *host, void **desc,
796			   dma_addr_t addr, int len, unsigned int cmd);
797
798#ifdef CONFIG_PM
799int sdhci_suspend_host(struct sdhci_host *host);
800int sdhci_resume_host(struct sdhci_host *host);
801int sdhci_runtime_suspend_host(struct sdhci_host *host);
802int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset);
803#endif
804
805void sdhci_cqe_enable(struct mmc_host *mmc);
806void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery);
807bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
808		   int *data_error);
809
810void sdhci_dumpregs(struct sdhci_host *host);
811void sdhci_enable_v4_mode(struct sdhci_host *host);
812
813void sdhci_start_tuning(struct sdhci_host *host);
814void sdhci_end_tuning(struct sdhci_host *host);
815void sdhci_reset_tuning(struct sdhci_host *host);
816void sdhci_send_tuning(struct sdhci_host *host, u32 opcode);
817void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode);
818void sdhci_switch_external_dma(struct sdhci_host *host, bool en);
819void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable);
820void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
821
822#endif /* __SDHCI_HW_H */
v3.5.6
 
  1/*
  2 *  linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
  3 *
  4 * Header file for Host Controller registers and I/O accessors.
  5 *
  6 *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
  7 *
  8 * This program is free software; you can redistribute it and/or modify
  9 * it under the terms of the GNU General Public License as published by
 10 * the Free Software Foundation; either version 2 of the License, or (at
 11 * your option) any later version.
 12 */
 13#ifndef __SDHCI_HW_H
 14#define __SDHCI_HW_H
 15
 
 16#include <linux/scatterlist.h>
 17#include <linux/compiler.h>
 18#include <linux/types.h>
 19#include <linux/io.h>
 
 
 20
 21#include <linux/mmc/sdhci.h>
 22
 23/*
 24 * Controller registers
 25 */
 26
 27#define SDHCI_DMA_ADDRESS	0x00
 28#define SDHCI_ARGUMENT2		SDHCI_DMA_ADDRESS
 
 29
 30#define SDHCI_BLOCK_SIZE	0x04
 31#define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
 32
 33#define SDHCI_BLOCK_COUNT	0x06
 34
 35#define SDHCI_ARGUMENT		0x08
 36
 37#define SDHCI_TRANSFER_MODE	0x0C
 38#define  SDHCI_TRNS_DMA		0x01
 39#define  SDHCI_TRNS_BLK_CNT_EN	0x02
 40#define  SDHCI_TRNS_AUTO_CMD12	0x04
 41#define  SDHCI_TRNS_AUTO_CMD23	0x08
 
 42#define  SDHCI_TRNS_READ	0x10
 43#define  SDHCI_TRNS_MULTI	0x20
 44
 45#define SDHCI_COMMAND		0x0E
 46#define  SDHCI_CMD_RESP_MASK	0x03
 47#define  SDHCI_CMD_CRC		0x08
 48#define  SDHCI_CMD_INDEX	0x10
 49#define  SDHCI_CMD_DATA		0x20
 50#define  SDHCI_CMD_ABORTCMD	0xC0
 51
 52#define  SDHCI_CMD_RESP_NONE	0x00
 53#define  SDHCI_CMD_RESP_LONG	0x01
 54#define  SDHCI_CMD_RESP_SHORT	0x02
 55#define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
 56
 57#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
 58#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
 59
 60#define SDHCI_RESPONSE		0x10
 61
 62#define SDHCI_BUFFER		0x20
 63
 64#define SDHCI_PRESENT_STATE	0x24
 65#define  SDHCI_CMD_INHIBIT	0x00000001
 66#define  SDHCI_DATA_INHIBIT	0x00000002
 67#define  SDHCI_DOING_WRITE	0x00000100
 68#define  SDHCI_DOING_READ	0x00000200
 69#define  SDHCI_SPACE_AVAILABLE	0x00000400
 70#define  SDHCI_DATA_AVAILABLE	0x00000800
 71#define  SDHCI_CARD_PRESENT	0x00010000
 
 
 
 
 72#define  SDHCI_WRITE_PROTECT	0x00080000
 73#define  SDHCI_DATA_LVL_MASK	0x00F00000
 74#define   SDHCI_DATA_LVL_SHIFT	20
 
 
 75
 76#define SDHCI_HOST_CONTROL	0x28
 77#define  SDHCI_CTRL_LED		0x01
 78#define  SDHCI_CTRL_4BITBUS	0x02
 79#define  SDHCI_CTRL_HISPD	0x04
 80#define  SDHCI_CTRL_DMA_MASK	0x18
 81#define   SDHCI_CTRL_SDMA	0x00
 82#define   SDHCI_CTRL_ADMA1	0x08
 83#define   SDHCI_CTRL_ADMA32	0x10
 84#define   SDHCI_CTRL_ADMA64	0x18
 85#define   SDHCI_CTRL_8BITBUS	0x20
 
 
 
 86
 87#define SDHCI_POWER_CONTROL	0x29
 88#define  SDHCI_POWER_ON		0x01
 89#define  SDHCI_POWER_180	0x0A
 90#define  SDHCI_POWER_300	0x0C
 91#define  SDHCI_POWER_330	0x0E
 92
 93#define SDHCI_BLOCK_GAP_CONTROL	0x2A
 94
 95#define SDHCI_WAKE_UP_CONTROL	0x2B
 96#define  SDHCI_WAKE_ON_INT	0x01
 97#define  SDHCI_WAKE_ON_INSERT	0x02
 98#define  SDHCI_WAKE_ON_REMOVE	0x04
 99
100#define SDHCI_CLOCK_CONTROL	0x2C
101#define  SDHCI_DIVIDER_SHIFT	8
102#define  SDHCI_DIVIDER_HI_SHIFT	6
103#define  SDHCI_DIV_MASK	0xFF
104#define  SDHCI_DIV_MASK_LEN	8
105#define  SDHCI_DIV_HI_MASK	0x300
106#define  SDHCI_PROG_CLOCK_MODE	0x0020
107#define  SDHCI_CLOCK_CARD_EN	0x0004
 
108#define  SDHCI_CLOCK_INT_STABLE	0x0002
109#define  SDHCI_CLOCK_INT_EN	0x0001
110
111#define SDHCI_TIMEOUT_CONTROL	0x2E
112
113#define SDHCI_SOFTWARE_RESET	0x2F
114#define  SDHCI_RESET_ALL	0x01
115#define  SDHCI_RESET_CMD	0x02
116#define  SDHCI_RESET_DATA	0x04
117
118#define SDHCI_INT_STATUS	0x30
119#define SDHCI_INT_ENABLE	0x34
120#define SDHCI_SIGNAL_ENABLE	0x38
121#define  SDHCI_INT_RESPONSE	0x00000001
122#define  SDHCI_INT_DATA_END	0x00000002
 
123#define  SDHCI_INT_DMA_END	0x00000008
124#define  SDHCI_INT_SPACE_AVAIL	0x00000010
125#define  SDHCI_INT_DATA_AVAIL	0x00000020
126#define  SDHCI_INT_CARD_INSERT	0x00000040
127#define  SDHCI_INT_CARD_REMOVE	0x00000080
128#define  SDHCI_INT_CARD_INT	0x00000100
 
 
129#define  SDHCI_INT_ERROR	0x00008000
130#define  SDHCI_INT_TIMEOUT	0x00010000
131#define  SDHCI_INT_CRC		0x00020000
132#define  SDHCI_INT_END_BIT	0x00040000
133#define  SDHCI_INT_INDEX	0x00080000
134#define  SDHCI_INT_DATA_TIMEOUT	0x00100000
135#define  SDHCI_INT_DATA_CRC	0x00200000
136#define  SDHCI_INT_DATA_END_BIT	0x00400000
137#define  SDHCI_INT_BUS_POWER	0x00800000
138#define  SDHCI_INT_ACMD12ERR	0x01000000
139#define  SDHCI_INT_ADMA_ERROR	0x02000000
140
141#define  SDHCI_INT_NORMAL_MASK	0x00007FFF
142#define  SDHCI_INT_ERROR_MASK	0xFFFF8000
143
144#define  SDHCI_INT_CMD_MASK	(SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
145		SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
 
146#define  SDHCI_INT_DATA_MASK	(SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
147		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
148		SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
149		SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
 
150#define SDHCI_INT_ALL_MASK	((unsigned int)-1)
151
152#define SDHCI_ACMD12_ERR	0x3C
 
 
 
 
 
 
 
 
 
 
 
153
154#define SDHCI_HOST_CONTROL2		0x3E
155#define  SDHCI_CTRL_UHS_MASK		0x0007
156#define   SDHCI_CTRL_UHS_SDR12		0x0000
157#define   SDHCI_CTRL_UHS_SDR25		0x0001
158#define   SDHCI_CTRL_UHS_SDR50		0x0002
159#define   SDHCI_CTRL_UHS_SDR104		0x0003
160#define   SDHCI_CTRL_UHS_DDR50		0x0004
161#define   SDHCI_CTRL_HS_SDR200		0x0005 /* reserved value in SDIO spec */
162#define  SDHCI_CTRL_VDD_180		0x0008
163#define  SDHCI_CTRL_DRV_TYPE_MASK	0x0030
164#define   SDHCI_CTRL_DRV_TYPE_B		0x0000
165#define   SDHCI_CTRL_DRV_TYPE_A		0x0010
166#define   SDHCI_CTRL_DRV_TYPE_C		0x0020
167#define   SDHCI_CTRL_DRV_TYPE_D		0x0030
168#define  SDHCI_CTRL_EXEC_TUNING		0x0040
169#define  SDHCI_CTRL_TUNED_CLK		0x0080
 
 
 
170#define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000
171
172#define SDHCI_CAPABILITIES	0x40
173#define  SDHCI_TIMEOUT_CLK_MASK	0x0000003F
174#define  SDHCI_TIMEOUT_CLK_SHIFT 0
175#define  SDHCI_TIMEOUT_CLK_UNIT	0x00000080
176#define  SDHCI_CLOCK_BASE_MASK	0x00003F00
177#define  SDHCI_CLOCK_V3_BASE_MASK	0x0000FF00
178#define  SDHCI_CLOCK_BASE_SHIFT	8
 
179#define  SDHCI_MAX_BLOCK_MASK	0x00030000
180#define  SDHCI_MAX_BLOCK_SHIFT  16
181#define  SDHCI_CAN_DO_8BIT	0x00040000
182#define  SDHCI_CAN_DO_ADMA2	0x00080000
183#define  SDHCI_CAN_DO_ADMA1	0x00100000
184#define  SDHCI_CAN_DO_HISPD	0x00200000
185#define  SDHCI_CAN_DO_SDMA	0x00400000
 
186#define  SDHCI_CAN_VDD_330	0x01000000
187#define  SDHCI_CAN_VDD_300	0x02000000
188#define  SDHCI_CAN_VDD_180	0x04000000
 
189#define  SDHCI_CAN_64BIT	0x10000000
190
 
191#define  SDHCI_SUPPORT_SDR50	0x00000001
192#define  SDHCI_SUPPORT_SDR104	0x00000002
193#define  SDHCI_SUPPORT_DDR50	0x00000004
194#define  SDHCI_DRIVER_TYPE_A	0x00000010
195#define  SDHCI_DRIVER_TYPE_C	0x00000020
196#define  SDHCI_DRIVER_TYPE_D	0x00000040
197#define  SDHCI_RETUNING_TIMER_COUNT_MASK	0x00000F00
198#define  SDHCI_RETUNING_TIMER_COUNT_SHIFT	8
199#define  SDHCI_USE_SDR50_TUNING			0x00002000
200#define  SDHCI_RETUNING_MODE_MASK		0x0000C000
201#define  SDHCI_RETUNING_MODE_SHIFT		14
202#define  SDHCI_CLOCK_MUL_MASK	0x00FF0000
203#define  SDHCI_CLOCK_MUL_SHIFT	16
204
205#define SDHCI_CAPABILITIES_1	0x44
206
207#define SDHCI_MAX_CURRENT		0x48
208#define  SDHCI_MAX_CURRENT_330_MASK	0x0000FF
209#define  SDHCI_MAX_CURRENT_330_SHIFT	0
210#define  SDHCI_MAX_CURRENT_300_MASK	0x00FF00
211#define  SDHCI_MAX_CURRENT_300_SHIFT	8
212#define  SDHCI_MAX_CURRENT_180_MASK	0xFF0000
213#define  SDHCI_MAX_CURRENT_180_SHIFT	16
214#define   SDHCI_MAX_CURRENT_MULTIPLIER	4
215
216/* 4C-4F reserved for more max current */
217
218#define SDHCI_SET_ACMD12_ERROR	0x50
219#define SDHCI_SET_INT_ERROR	0x52
220
221#define SDHCI_ADMA_ERROR	0x54
222
223/* 55-57 reserved */
224
225#define SDHCI_ADMA_ADDRESS	0x58
 
226
227/* 60-FB reserved */
228
 
 
 
 
 
 
 
 
 
 
 
229#define SDHCI_SLOT_INT_STATUS	0xFC
230
231#define SDHCI_HOST_VERSION	0xFE
232#define  SDHCI_VENDOR_VER_MASK	0xFF00
233#define  SDHCI_VENDOR_VER_SHIFT	8
234#define  SDHCI_SPEC_VER_MASK	0x00FF
235#define  SDHCI_SPEC_VER_SHIFT	0
236#define   SDHCI_SPEC_100	0
237#define   SDHCI_SPEC_200	1
238#define   SDHCI_SPEC_300	2
 
 
 
239
240/*
241 * End of controller registers.
242 */
243
244#define SDHCI_MAX_DIV_SPEC_200	256
245#define SDHCI_MAX_DIV_SPEC_300	2046
246
247/*
248 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
249 */
250#define SDHCI_DEFAULT_BOUNDARY_SIZE  (512 * 1024)
251#define SDHCI_DEFAULT_BOUNDARY_ARG   (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
252
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
253struct sdhci_ops {
254#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
255	u32		(*read_l)(struct sdhci_host *host, int reg);
256	u16		(*read_w)(struct sdhci_host *host, int reg);
257	u8		(*read_b)(struct sdhci_host *host, int reg);
258	void		(*write_l)(struct sdhci_host *host, u32 val, int reg);
259	void		(*write_w)(struct sdhci_host *host, u16 val, int reg);
260	void		(*write_b)(struct sdhci_host *host, u8 val, int reg);
261#endif
262
263	void	(*set_clock)(struct sdhci_host *host, unsigned int clock);
 
 
 
 
264
 
265	int		(*enable_dma)(struct sdhci_host *host);
266	unsigned int	(*get_max_clock)(struct sdhci_host *host);
267	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 
268	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
269	int		(*platform_8bit_width)(struct sdhci_host *host,
270					       int width);
 
 
271	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
272					     u8 power_mode);
273	unsigned int    (*get_ro)(struct sdhci_host *host);
274	void	(*platform_reset_enter)(struct sdhci_host *host, u8 mask);
275	void	(*platform_reset_exit)(struct sdhci_host *host, u8 mask);
276	int	(*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
277	void	(*hw_reset)(struct sdhci_host *host);
278	void	(*platform_suspend)(struct sdhci_host *host);
279	void	(*platform_resume)(struct sdhci_host *host);
 
 
 
 
 
 
 
 
 
280};
281
282#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
283
284static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
285{
286	if (unlikely(host->ops->write_l))
287		host->ops->write_l(host, val, reg);
288	else
289		writel(val, host->ioaddr + reg);
290}
291
292static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
293{
294	if (unlikely(host->ops->write_w))
295		host->ops->write_w(host, val, reg);
296	else
297		writew(val, host->ioaddr + reg);
298}
299
300static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
301{
302	if (unlikely(host->ops->write_b))
303		host->ops->write_b(host, val, reg);
304	else
305		writeb(val, host->ioaddr + reg);
306}
307
308static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
309{
310	if (unlikely(host->ops->read_l))
311		return host->ops->read_l(host, reg);
312	else
313		return readl(host->ioaddr + reg);
314}
315
316static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
317{
318	if (unlikely(host->ops->read_w))
319		return host->ops->read_w(host, reg);
320	else
321		return readw(host->ioaddr + reg);
322}
323
324static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
325{
326	if (unlikely(host->ops->read_b))
327		return host->ops->read_b(host, reg);
328	else
329		return readb(host->ioaddr + reg);
330}
331
332#else
333
334static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
335{
336	writel(val, host->ioaddr + reg);
337}
338
339static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
340{
341	writew(val, host->ioaddr + reg);
342}
343
344static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
345{
346	writeb(val, host->ioaddr + reg);
347}
348
349static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
350{
351	return readl(host->ioaddr + reg);
352}
353
354static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
355{
356	return readw(host->ioaddr + reg);
357}
358
359static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
360{
361	return readb(host->ioaddr + reg);
362}
363
364#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
365
366extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
367	size_t priv_size);
368extern void sdhci_free_host(struct sdhci_host *host);
369
370static inline void *sdhci_priv(struct sdhci_host *host)
371{
372	return (void *)host->private;
373}
374
375extern void sdhci_card_detect(struct sdhci_host *host);
376extern int sdhci_add_host(struct sdhci_host *host);
377extern void sdhci_remove_host(struct sdhci_host *host, int dead);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
378
379#ifdef CONFIG_PM
380extern int sdhci_suspend_host(struct sdhci_host *host);
381extern int sdhci_resume_host(struct sdhci_host *host);
382extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
 
383#endif
384
385#ifdef CONFIG_PM_RUNTIME
386extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
387extern int sdhci_runtime_resume_host(struct sdhci_host *host);
388#endif
 
 
 
 
 
 
 
 
 
 
 
 
389
390#endif /* __SDHCI_HW_H */