Loading...
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
4 *
5 * Header file for Host Controller registers and I/O accessors.
6 *
7 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
8 */
9#ifndef __SDHCI_HW_H
10#define __SDHCI_HW_H
11
12#include <linux/bits.h>
13#include <linux/scatterlist.h>
14#include <linux/compiler.h>
15#include <linux/types.h>
16#include <linux/io.h>
17#include <linux/leds.h>
18#include <linux/interrupt.h>
19
20#include <linux/mmc/host.h>
21
22/*
23 * Controller registers
24 */
25
26#define SDHCI_DMA_ADDRESS 0x00
27#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
28#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS
29
30#define SDHCI_BLOCK_SIZE 0x04
31#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
32
33#define SDHCI_BLOCK_COUNT 0x06
34
35#define SDHCI_ARGUMENT 0x08
36
37#define SDHCI_TRANSFER_MODE 0x0C
38#define SDHCI_TRNS_DMA 0x01
39#define SDHCI_TRNS_BLK_CNT_EN 0x02
40#define SDHCI_TRNS_AUTO_CMD12 0x04
41#define SDHCI_TRNS_AUTO_CMD23 0x08
42#define SDHCI_TRNS_AUTO_SEL 0x0C
43#define SDHCI_TRNS_READ 0x10
44#define SDHCI_TRNS_MULTI 0x20
45
46#define SDHCI_COMMAND 0x0E
47#define SDHCI_CMD_RESP_MASK 0x03
48#define SDHCI_CMD_CRC 0x08
49#define SDHCI_CMD_INDEX 0x10
50#define SDHCI_CMD_DATA 0x20
51#define SDHCI_CMD_ABORTCMD 0xC0
52
53#define SDHCI_CMD_RESP_NONE 0x00
54#define SDHCI_CMD_RESP_LONG 0x01
55#define SDHCI_CMD_RESP_SHORT 0x02
56#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
57
58#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
59#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
60
61#define SDHCI_RESPONSE 0x10
62
63#define SDHCI_BUFFER 0x20
64
65#define SDHCI_PRESENT_STATE 0x24
66#define SDHCI_CMD_INHIBIT 0x00000001
67#define SDHCI_DATA_INHIBIT 0x00000002
68#define SDHCI_DOING_WRITE 0x00000100
69#define SDHCI_DOING_READ 0x00000200
70#define SDHCI_SPACE_AVAILABLE 0x00000400
71#define SDHCI_DATA_AVAILABLE 0x00000800
72#define SDHCI_CARD_PRESENT 0x00010000
73#define SDHCI_CARD_PRES_SHIFT 16
74#define SDHCI_CD_STABLE 0x00020000
75#define SDHCI_CD_LVL 0x00040000
76#define SDHCI_CD_LVL_SHIFT 18
77#define SDHCI_WRITE_PROTECT 0x00080000
78#define SDHCI_DATA_LVL_MASK 0x00F00000
79#define SDHCI_DATA_LVL_SHIFT 20
80#define SDHCI_DATA_0_LVL_MASK 0x00100000
81#define SDHCI_CMD_LVL 0x01000000
82
83#define SDHCI_HOST_CONTROL 0x28
84#define SDHCI_CTRL_LED 0x01
85#define SDHCI_CTRL_4BITBUS 0x02
86#define SDHCI_CTRL_HISPD 0x04
87#define SDHCI_CTRL_DMA_MASK 0x18
88#define SDHCI_CTRL_SDMA 0x00
89#define SDHCI_CTRL_ADMA1 0x08
90#define SDHCI_CTRL_ADMA32 0x10
91#define SDHCI_CTRL_ADMA64 0x18
92#define SDHCI_CTRL_ADMA3 0x18
93#define SDHCI_CTRL_8BITBUS 0x20
94#define SDHCI_CTRL_CDTEST_INS 0x40
95#define SDHCI_CTRL_CDTEST_EN 0x80
96
97#define SDHCI_POWER_CONTROL 0x29
98#define SDHCI_POWER_ON 0x01
99#define SDHCI_POWER_180 0x0A
100#define SDHCI_POWER_300 0x0C
101#define SDHCI_POWER_330 0x0E
102
103#define SDHCI_BLOCK_GAP_CONTROL 0x2A
104
105#define SDHCI_WAKE_UP_CONTROL 0x2B
106#define SDHCI_WAKE_ON_INT 0x01
107#define SDHCI_WAKE_ON_INSERT 0x02
108#define SDHCI_WAKE_ON_REMOVE 0x04
109
110#define SDHCI_CLOCK_CONTROL 0x2C
111#define SDHCI_DIVIDER_SHIFT 8
112#define SDHCI_DIVIDER_HI_SHIFT 6
113#define SDHCI_DIV_MASK 0xFF
114#define SDHCI_DIV_MASK_LEN 8
115#define SDHCI_DIV_HI_MASK 0x300
116#define SDHCI_PROG_CLOCK_MODE 0x0020
117#define SDHCI_CLOCK_CARD_EN 0x0004
118#define SDHCI_CLOCK_PLL_EN 0x0008
119#define SDHCI_CLOCK_INT_STABLE 0x0002
120#define SDHCI_CLOCK_INT_EN 0x0001
121
122#define SDHCI_TIMEOUT_CONTROL 0x2E
123
124#define SDHCI_SOFTWARE_RESET 0x2F
125#define SDHCI_RESET_ALL 0x01
126#define SDHCI_RESET_CMD 0x02
127#define SDHCI_RESET_DATA 0x04
128
129#define SDHCI_INT_STATUS 0x30
130#define SDHCI_INT_ENABLE 0x34
131#define SDHCI_SIGNAL_ENABLE 0x38
132#define SDHCI_INT_RESPONSE 0x00000001
133#define SDHCI_INT_DATA_END 0x00000002
134#define SDHCI_INT_BLK_GAP 0x00000004
135#define SDHCI_INT_DMA_END 0x00000008
136#define SDHCI_INT_SPACE_AVAIL 0x00000010
137#define SDHCI_INT_DATA_AVAIL 0x00000020
138#define SDHCI_INT_CARD_INSERT 0x00000040
139#define SDHCI_INT_CARD_REMOVE 0x00000080
140#define SDHCI_INT_CARD_INT 0x00000100
141#define SDHCI_INT_RETUNE 0x00001000
142#define SDHCI_INT_CQE 0x00004000
143#define SDHCI_INT_ERROR 0x00008000
144#define SDHCI_INT_TIMEOUT 0x00010000
145#define SDHCI_INT_CRC 0x00020000
146#define SDHCI_INT_END_BIT 0x00040000
147#define SDHCI_INT_INDEX 0x00080000
148#define SDHCI_INT_DATA_TIMEOUT 0x00100000
149#define SDHCI_INT_DATA_CRC 0x00200000
150#define SDHCI_INT_DATA_END_BIT 0x00400000
151#define SDHCI_INT_BUS_POWER 0x00800000
152#define SDHCI_INT_AUTO_CMD_ERR 0x01000000
153#define SDHCI_INT_ADMA_ERROR 0x02000000
154
155#define SDHCI_INT_NORMAL_MASK 0x00007FFF
156#define SDHCI_INT_ERROR_MASK 0xFFFF8000
157
158#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
159 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \
160 SDHCI_INT_AUTO_CMD_ERR)
161#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
162 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
163 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
164 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
165 SDHCI_INT_BLK_GAP)
166#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
167
168#define SDHCI_CQE_INT_ERR_MASK ( \
169 SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \
170 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \
171 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)
172
173#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE)
174
175#define SDHCI_AUTO_CMD_STATUS 0x3C
176#define SDHCI_AUTO_CMD_TIMEOUT 0x00000002
177#define SDHCI_AUTO_CMD_CRC 0x00000004
178#define SDHCI_AUTO_CMD_END_BIT 0x00000008
179#define SDHCI_AUTO_CMD_INDEX 0x00000010
180
181#define SDHCI_HOST_CONTROL2 0x3E
182#define SDHCI_CTRL_UHS_MASK 0x0007
183#define SDHCI_CTRL_UHS_SDR12 0x0000
184#define SDHCI_CTRL_UHS_SDR25 0x0001
185#define SDHCI_CTRL_UHS_SDR50 0x0002
186#define SDHCI_CTRL_UHS_SDR104 0x0003
187#define SDHCI_CTRL_UHS_DDR50 0x0004
188#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
189#define SDHCI_CTRL_VDD_180 0x0008
190#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
191#define SDHCI_CTRL_DRV_TYPE_B 0x0000
192#define SDHCI_CTRL_DRV_TYPE_A 0x0010
193#define SDHCI_CTRL_DRV_TYPE_C 0x0020
194#define SDHCI_CTRL_DRV_TYPE_D 0x0030
195#define SDHCI_CTRL_EXEC_TUNING 0x0040
196#define SDHCI_CTRL_TUNED_CLK 0x0080
197#define SDHCI_CMD23_ENABLE 0x0800
198#define SDHCI_CTRL_V4_MODE 0x1000
199#define SDHCI_CTRL_64BIT_ADDR 0x2000
200#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
201
202#define SDHCI_CAPABILITIES 0x40
203#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0)
204#define SDHCI_TIMEOUT_CLK_SHIFT 0
205#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
206#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8)
207#define SDHCI_CLOCK_BASE_SHIFT 8
208#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8)
209#define SDHCI_MAX_BLOCK_MASK 0x00030000
210#define SDHCI_MAX_BLOCK_SHIFT 16
211#define SDHCI_CAN_DO_8BIT 0x00040000
212#define SDHCI_CAN_DO_ADMA2 0x00080000
213#define SDHCI_CAN_DO_ADMA1 0x00100000
214#define SDHCI_CAN_DO_HISPD 0x00200000
215#define SDHCI_CAN_DO_SDMA 0x00400000
216#define SDHCI_CAN_DO_SUSPEND 0x00800000
217#define SDHCI_CAN_VDD_330 0x01000000
218#define SDHCI_CAN_VDD_300 0x02000000
219#define SDHCI_CAN_VDD_180 0x04000000
220#define SDHCI_CAN_64BIT_V4 0x08000000
221#define SDHCI_CAN_64BIT 0x10000000
222
223#define SDHCI_CAPABILITIES_1 0x44
224#define SDHCI_SUPPORT_SDR50 0x00000001
225#define SDHCI_SUPPORT_SDR104 0x00000002
226#define SDHCI_SUPPORT_DDR50 0x00000004
227#define SDHCI_DRIVER_TYPE_A 0x00000010
228#define SDHCI_DRIVER_TYPE_C 0x00000020
229#define SDHCI_DRIVER_TYPE_D 0x00000040
230#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8)
231#define SDHCI_USE_SDR50_TUNING 0x00002000
232#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14)
233#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16)
234#define SDHCI_CAN_DO_ADMA3 0x08000000
235#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
236
237#define SDHCI_MAX_CURRENT 0x48
238#define SDHCI_MAX_CURRENT_LIMIT GENMASK(7, 0)
239#define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0)
240#define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8)
241#define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16)
242#define SDHCI_MAX_CURRENT_MULTIPLIER 4
243
244/* 4C-4F reserved for more max current */
245
246#define SDHCI_SET_ACMD12_ERROR 0x50
247#define SDHCI_SET_INT_ERROR 0x52
248
249#define SDHCI_ADMA_ERROR 0x54
250
251/* 55-57 reserved */
252
253#define SDHCI_ADMA_ADDRESS 0x58
254#define SDHCI_ADMA_ADDRESS_HI 0x5C
255
256/* 60-FB reserved */
257
258#define SDHCI_PRESET_FOR_HIGH_SPEED 0x64
259#define SDHCI_PRESET_FOR_SDR12 0x66
260#define SDHCI_PRESET_FOR_SDR25 0x68
261#define SDHCI_PRESET_FOR_SDR50 0x6A
262#define SDHCI_PRESET_FOR_SDR104 0x6C
263#define SDHCI_PRESET_FOR_DDR50 0x6E
264#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
265#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14)
266#define SDHCI_PRESET_CLKGEN_SEL BIT(10)
267#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0)
268
269#define SDHCI_SLOT_INT_STATUS 0xFC
270
271#define SDHCI_HOST_VERSION 0xFE
272#define SDHCI_VENDOR_VER_MASK 0xFF00
273#define SDHCI_VENDOR_VER_SHIFT 8
274#define SDHCI_SPEC_VER_MASK 0x00FF
275#define SDHCI_SPEC_VER_SHIFT 0
276#define SDHCI_SPEC_100 0
277#define SDHCI_SPEC_200 1
278#define SDHCI_SPEC_300 2
279#define SDHCI_SPEC_400 3
280#define SDHCI_SPEC_410 4
281#define SDHCI_SPEC_420 5
282
283/*
284 * End of controller registers.
285 */
286
287#define SDHCI_MAX_DIV_SPEC_200 256
288#define SDHCI_MAX_DIV_SPEC_300 2046
289
290/*
291 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
292 */
293#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
294#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
295
296/* ADMA2 32-bit DMA descriptor size */
297#define SDHCI_ADMA2_32_DESC_SZ 8
298
299/* ADMA2 32-bit descriptor */
300struct sdhci_adma2_32_desc {
301 __le16 cmd;
302 __le16 len;
303 __le32 addr;
304} __packed __aligned(4);
305
306/* ADMA2 data alignment */
307#define SDHCI_ADMA2_ALIGN 4
308#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1)
309
310/*
311 * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte
312 * alignment for the descriptor table even in 32-bit DMA mode. Memory
313 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
314 */
315#define SDHCI_ADMA2_DESC_ALIGN 8
316
317/*
318 * ADMA2 64-bit DMA descriptor size
319 * According to SD Host Controller spec v4.10, there are two kinds of
320 * descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit
321 * Descriptor, if Host Version 4 Enable is set in the Host Control 2
322 * register, 128-bit Descriptor will be selected.
323 */
324#define SDHCI_ADMA2_64_DESC_SZ(host) ((host)->v4_mode ? 16 : 12)
325
326/*
327 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
328 * aligned.
329 */
330struct sdhci_adma2_64_desc {
331 __le16 cmd;
332 __le16 len;
333 __le32 addr_lo;
334 __le32 addr_hi;
335} __packed __aligned(4);
336
337#define ADMA2_TRAN_VALID 0x21
338#define ADMA2_NOP_END_VALID 0x3
339#define ADMA2_END 0x2
340
341/*
342 * Maximum segments assuming a 512KiB maximum requisition size and a minimum
343 * 4KiB page size. Note this also allows enough for multiple descriptors in
344 * case of PAGE_SIZE >= 64KiB.
345 */
346#define SDHCI_MAX_SEGS 128
347
348/* Allow for a command request and a data request at the same time */
349#define SDHCI_MAX_MRQS 2
350
351/*
352 * 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms.
353 * However since the start time of the command, the time between
354 * command and response, and the time between response and start of data is
355 * not known, set the command transfer time to 10ms.
356 */
357#define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */
358
359#define sdhci_err_stats_inc(host, err_name) \
360 mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name)
361
362enum sdhci_cookie {
363 COOKIE_UNMAPPED,
364 COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
365 COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */
366};
367
368struct sdhci_host {
369 /* Data set by hardware interface driver */
370 const char *hw_name; /* Hardware bus name */
371
372 unsigned int quirks; /* Deviations from spec. */
373
374/* Controller doesn't honor resets unless we touch the clock register */
375#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
376/* Controller has bad caps bits, but really supports DMA */
377#define SDHCI_QUIRK_FORCE_DMA (1<<1)
378/* Controller doesn't like to be reset when there is no card inserted. */
379#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
380/* Controller doesn't like clearing the power reg before a change */
381#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
382/* Controller has an unusable DMA engine */
383#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
384/* Controller has an unusable ADMA engine */
385#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
386/* Controller can only DMA from 32-bit aligned addresses */
387#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
388/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
389#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
390/* Controller can only ADMA chunks that are a multiple of 32 bits */
391#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
392/* Controller needs to be reset after each request to stay stable */
393#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
394/* Controller needs voltage and power writes to happen separately */
395#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
396/* Controller provides an incorrect timeout value for transfers */
397#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
398/* Controller has an issue with buffer bits for small transfers */
399#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
400/* Controller does not provide transfer-complete interrupt when not busy */
401#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
402/* Controller has unreliable card detection */
403#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
404/* Controller reports inverted write-protect state */
405#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
406/* Controller has unusable command queue engine */
407#define SDHCI_QUIRK_BROKEN_CQE (1<<17)
408/* Controller does not like fast PIO transfers */
409#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
410/* Controller does not have a LED */
411#define SDHCI_QUIRK_NO_LED (1<<19)
412/* Controller has to be forced to use block size of 2048 bytes */
413#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
414/* Controller cannot do multi-block transfers */
415#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
416/* Controller can only handle 1-bit data transfers */
417#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
418/* Controller needs 10ms delay between applying power and clock */
419#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
420/* Controller uses SDCLK instead of TMCLK for data timeouts */
421#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
422/* Controller reports wrong base clock capability */
423#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
424/* Controller cannot support End Attribute in NOP ADMA descriptor */
425#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
426/* Controller is missing device caps. Use caps provided by host */
427#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
428/* Controller uses Auto CMD12 command to stop the transfer */
429#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
430/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
431#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
432/* Controller treats ADMA descriptors with length 0000h incorrectly */
433#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
434/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
435#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
436
437 unsigned int quirks2; /* More deviations from spec. */
438
439#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
440#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
441/* The system physically doesn't support 1.8v, even if the host does */
442#define SDHCI_QUIRK2_NO_1_8_V (1<<2)
443#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
444#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
445/* Controller has a non-standard host control register */
446#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
447/* Controller does not support HS200 */
448#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
449/* Controller does not support DDR50 */
450#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
451/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
452#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
453/* Controller does not support 64-bit DMA */
454#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
455/* need clear transfer mode register before send cmd */
456#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
457/* Capability register bit-63 indicates HS400 support */
458#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
459/* forced tuned clock */
460#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12)
461/* disable the block count for single block transactions */
462#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13)
463/* Controller broken with using ACMD23 */
464#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
465/* Broken Clock divider zero in controller */
466#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
467/* Controller has CRC in 136 bit Command Response */
468#define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16)
469/*
470 * Disable HW timeout if the requested timeout is more than the maximum
471 * obtainable timeout.
472 */
473#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
474/*
475 * 32-bit block count may not support eMMC where upper bits of CMD23 are used
476 * for other purposes. Consequently we support 16-bit block count by default.
477 * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit
478 * block count.
479 */
480#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
481/* Issue CMD and DATA reset together */
482#define SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER (1<<19)
483
484 int irq; /* Device IRQ */
485 void __iomem *ioaddr; /* Mapped address */
486 phys_addr_t mapbase; /* physical address base */
487 char *bounce_buffer; /* For packing SDMA reads/writes */
488 dma_addr_t bounce_addr;
489 unsigned int bounce_buffer_size;
490
491 const struct sdhci_ops *ops; /* Low level hw interface */
492
493 /* Internal data */
494 struct mmc_host *mmc; /* MMC structure */
495 struct mmc_host_ops mmc_host_ops; /* MMC host ops */
496 u64 dma_mask; /* custom DMA mask */
497
498#if IS_ENABLED(CONFIG_LEDS_CLASS)
499 struct led_classdev led; /* LED control */
500 char led_name[32];
501#endif
502
503 spinlock_t lock; /* Mutex */
504
505 int flags; /* Host attributes */
506#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
507#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
508#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
509#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
510#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
511#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
512#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
513#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
514#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
515#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
516#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */
517#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */
518#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */
519
520 unsigned int version; /* SDHCI spec. version */
521
522 unsigned int max_clk; /* Max possible freq (MHz) */
523 unsigned int timeout_clk; /* Timeout freq (KHz) */
524 u8 max_timeout_count; /* Vendor specific max timeout count */
525 unsigned int clk_mul; /* Clock Muliplier value */
526
527 unsigned int clock; /* Current clock (MHz) */
528 u8 pwr; /* Current voltage */
529 u8 drv_type; /* Current UHS-I driver type */
530 bool reinit_uhs; /* Force UHS-related re-initialization */
531
532 bool runtime_suspended; /* Host is runtime suspended */
533 bool bus_on; /* Bus power prevents runtime suspend */
534 bool preset_enabled; /* Preset is enabled */
535 bool pending_reset; /* Cmd/data reset is pending */
536 bool irq_wake_enabled; /* IRQ wakeup is enabled */
537 bool v4_mode; /* Host Version 4 Enable */
538 bool use_external_dma; /* Host selects to use external DMA */
539 bool always_defer_done; /* Always defer to complete requests */
540
541 struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */
542 struct mmc_command *cmd; /* Current command */
543 struct mmc_command *data_cmd; /* Current data command */
544 struct mmc_command *deferred_cmd; /* Deferred command */
545 struct mmc_data *data; /* Current data request */
546 unsigned int data_early:1; /* Data finished before cmd */
547
548 struct sg_mapping_iter sg_miter; /* SG state for PIO */
549 unsigned int blocks; /* remaining PIO blocks */
550
551 int sg_count; /* Mapped sg entries */
552 int max_adma; /* Max. length in ADMA descriptor */
553
554 void *adma_table; /* ADMA descriptor table */
555 void *align_buffer; /* Bounce buffer */
556
557 size_t adma_table_sz; /* ADMA descriptor table size */
558 size_t align_buffer_sz; /* Bounce buffer size */
559
560 dma_addr_t adma_addr; /* Mapped ADMA descr. table */
561 dma_addr_t align_addr; /* Mapped bounce buffer */
562
563 unsigned int desc_sz; /* ADMA current descriptor size */
564 unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */
565
566 struct workqueue_struct *complete_wq; /* Request completion wq */
567 struct work_struct complete_work; /* Request completion work */
568
569 struct timer_list timer; /* Timer for timeouts */
570 struct timer_list data_timer; /* Timer for data timeouts */
571
572#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
573 struct dma_chan *rx_chan;
574 struct dma_chan *tx_chan;
575#endif
576
577 u32 caps; /* CAPABILITY_0 */
578 u32 caps1; /* CAPABILITY_1 */
579 bool read_caps; /* Capability flags have been read */
580
581 bool sdhci_core_to_disable_vqmmc; /* sdhci core can disable vqmmc */
582 unsigned int ocr_avail_sdio; /* OCR bit masks */
583 unsigned int ocr_avail_sd;
584 unsigned int ocr_avail_mmc;
585 u32 ocr_mask; /* available voltages */
586
587 unsigned timing; /* Current timing */
588
589 u32 thread_isr;
590
591 /* cached registers */
592 u32 ier;
593
594 bool cqe_on; /* CQE is operating */
595 u32 cqe_ier; /* CQE interrupt mask */
596 u32 cqe_err_ier; /* CQE error interrupt mask */
597
598 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
599 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */
600
601 unsigned int tuning_count; /* Timer count for re-tuning */
602 unsigned int tuning_mode; /* Re-tuning mode supported by host */
603 unsigned int tuning_err; /* Error code for re-tuning */
604#define SDHCI_TUNING_MODE_1 0
605#define SDHCI_TUNING_MODE_2 1
606#define SDHCI_TUNING_MODE_3 2
607 /* Delay (ms) between tuning commands */
608 int tuning_delay;
609 int tuning_loop_count;
610
611 /* Host SDMA buffer boundary. */
612 u32 sdma_boundary;
613
614 /* Host ADMA table count */
615 u32 adma_table_cnt;
616
617 u64 data_timeout;
618
619 unsigned long private[] ____cacheline_aligned;
620};
621
622struct sdhci_ops {
623#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
624 u32 (*read_l)(struct sdhci_host *host, int reg);
625 u16 (*read_w)(struct sdhci_host *host, int reg);
626 u8 (*read_b)(struct sdhci_host *host, int reg);
627 void (*write_l)(struct sdhci_host *host, u32 val, int reg);
628 void (*write_w)(struct sdhci_host *host, u16 val, int reg);
629 void (*write_b)(struct sdhci_host *host, u8 val, int reg);
630#endif
631
632 void (*set_clock)(struct sdhci_host *host, unsigned int clock);
633 void (*set_power)(struct sdhci_host *host, unsigned char mode,
634 unsigned short vdd);
635
636 u32 (*irq)(struct sdhci_host *host, u32 intmask);
637
638 int (*set_dma_mask)(struct sdhci_host *host);
639 int (*enable_dma)(struct sdhci_host *host);
640 unsigned int (*get_max_clock)(struct sdhci_host *host);
641 unsigned int (*get_min_clock)(struct sdhci_host *host);
642 /* get_timeout_clock should return clk rate in unit of Hz */
643 unsigned int (*get_timeout_clock)(struct sdhci_host *host);
644 unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
645 void (*set_timeout)(struct sdhci_host *host,
646 struct mmc_command *cmd);
647 void (*set_bus_width)(struct sdhci_host *host, int width);
648 void (*platform_send_init_74_clocks)(struct sdhci_host *host,
649 u8 power_mode);
650 unsigned int (*get_ro)(struct sdhci_host *host);
651 void (*reset)(struct sdhci_host *host, u8 mask);
652 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
653 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
654 void (*hw_reset)(struct sdhci_host *host);
655 void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
656 void (*card_event)(struct sdhci_host *host);
657 void (*voltage_switch)(struct sdhci_host *host);
658 void (*adma_write_desc)(struct sdhci_host *host, void **desc,
659 dma_addr_t addr, int len, unsigned int cmd);
660 void (*copy_to_bounce_buffer)(struct sdhci_host *host,
661 struct mmc_data *data,
662 unsigned int length);
663 void (*request_done)(struct sdhci_host *host,
664 struct mmc_request *mrq);
665 void (*dump_vendor_regs)(struct sdhci_host *host);
666};
667
668#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
669
670static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
671{
672 if (unlikely(host->ops->write_l))
673 host->ops->write_l(host, val, reg);
674 else
675 writel(val, host->ioaddr + reg);
676}
677
678static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
679{
680 if (unlikely(host->ops->write_w))
681 host->ops->write_w(host, val, reg);
682 else
683 writew(val, host->ioaddr + reg);
684}
685
686static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
687{
688 if (unlikely(host->ops->write_b))
689 host->ops->write_b(host, val, reg);
690 else
691 writeb(val, host->ioaddr + reg);
692}
693
694static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
695{
696 if (unlikely(host->ops->read_l))
697 return host->ops->read_l(host, reg);
698 else
699 return readl(host->ioaddr + reg);
700}
701
702static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
703{
704 if (unlikely(host->ops->read_w))
705 return host->ops->read_w(host, reg);
706 else
707 return readw(host->ioaddr + reg);
708}
709
710static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
711{
712 if (unlikely(host->ops->read_b))
713 return host->ops->read_b(host, reg);
714 else
715 return readb(host->ioaddr + reg);
716}
717
718#else
719
720static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
721{
722 writel(val, host->ioaddr + reg);
723}
724
725static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
726{
727 writew(val, host->ioaddr + reg);
728}
729
730static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
731{
732 writeb(val, host->ioaddr + reg);
733}
734
735static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
736{
737 return readl(host->ioaddr + reg);
738}
739
740static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
741{
742 return readw(host->ioaddr + reg);
743}
744
745static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
746{
747 return readb(host->ioaddr + reg);
748}
749
750#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
751
752struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size);
753void sdhci_free_host(struct sdhci_host *host);
754
755static inline void *sdhci_priv(struct sdhci_host *host)
756{
757 return host->private;
758}
759
760void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver,
761 const u32 *caps, const u32 *caps1);
762int sdhci_setup_host(struct sdhci_host *host);
763void sdhci_cleanup_host(struct sdhci_host *host);
764int __sdhci_add_host(struct sdhci_host *host);
765int sdhci_add_host(struct sdhci_host *host);
766void sdhci_remove_host(struct sdhci_host *host, int dead);
767
768static inline void sdhci_read_caps(struct sdhci_host *host)
769{
770 __sdhci_read_caps(host, NULL, NULL, NULL);
771}
772
773u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
774 unsigned int *actual_clock);
775void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
776void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
777void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
778 unsigned short vdd);
779void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
780 unsigned char mode,
781 unsigned short vdd);
782void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
783 unsigned short vdd);
784int sdhci_get_cd_nogpio(struct mmc_host *mmc);
785void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
786int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
787void sdhci_set_bus_width(struct sdhci_host *host, int width);
788void sdhci_reset(struct sdhci_host *host, u8 mask);
789void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
790int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
791void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
792int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
793 struct mmc_ios *ios);
794void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable);
795void sdhci_adma_write_desc(struct sdhci_host *host, void **desc,
796 dma_addr_t addr, int len, unsigned int cmd);
797
798#ifdef CONFIG_PM
799int sdhci_suspend_host(struct sdhci_host *host);
800int sdhci_resume_host(struct sdhci_host *host);
801int sdhci_runtime_suspend_host(struct sdhci_host *host);
802int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset);
803#endif
804
805void sdhci_cqe_enable(struct mmc_host *mmc);
806void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery);
807bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
808 int *data_error);
809
810void sdhci_dumpregs(struct sdhci_host *host);
811void sdhci_enable_v4_mode(struct sdhci_host *host);
812
813void sdhci_start_tuning(struct sdhci_host *host);
814void sdhci_end_tuning(struct sdhci_host *host);
815void sdhci_reset_tuning(struct sdhci_host *host);
816void sdhci_send_tuning(struct sdhci_host *host, u32 opcode);
817void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode);
818void sdhci_switch_external_dma(struct sdhci_host *host, bool en);
819void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable);
820void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
821
822#endif /* __SDHCI_HW_H */
1/*
2 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
3 *
4 * Header file for Host Controller registers and I/O accessors.
5 *
6 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or (at
11 * your option) any later version.
12 */
13#ifndef __SDHCI_HW_H
14#define __SDHCI_HW_H
15
16#include <linux/scatterlist.h>
17#include <linux/compiler.h>
18#include <linux/types.h>
19#include <linux/io.h>
20
21#include <linux/mmc/host.h>
22
23/*
24 * Controller registers
25 */
26
27#define SDHCI_DMA_ADDRESS 0x00
28#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
29
30#define SDHCI_BLOCK_SIZE 0x04
31#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
32
33#define SDHCI_BLOCK_COUNT 0x06
34
35#define SDHCI_ARGUMENT 0x08
36
37#define SDHCI_TRANSFER_MODE 0x0C
38#define SDHCI_TRNS_DMA 0x01
39#define SDHCI_TRNS_BLK_CNT_EN 0x02
40#define SDHCI_TRNS_AUTO_CMD12 0x04
41#define SDHCI_TRNS_AUTO_CMD23 0x08
42#define SDHCI_TRNS_READ 0x10
43#define SDHCI_TRNS_MULTI 0x20
44
45#define SDHCI_COMMAND 0x0E
46#define SDHCI_CMD_RESP_MASK 0x03
47#define SDHCI_CMD_CRC 0x08
48#define SDHCI_CMD_INDEX 0x10
49#define SDHCI_CMD_DATA 0x20
50#define SDHCI_CMD_ABORTCMD 0xC0
51
52#define SDHCI_CMD_RESP_NONE 0x00
53#define SDHCI_CMD_RESP_LONG 0x01
54#define SDHCI_CMD_RESP_SHORT 0x02
55#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
56
57#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
58#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
59
60#define SDHCI_RESPONSE 0x10
61
62#define SDHCI_BUFFER 0x20
63
64#define SDHCI_PRESENT_STATE 0x24
65#define SDHCI_CMD_INHIBIT 0x00000001
66#define SDHCI_DATA_INHIBIT 0x00000002
67#define SDHCI_DOING_WRITE 0x00000100
68#define SDHCI_DOING_READ 0x00000200
69#define SDHCI_SPACE_AVAILABLE 0x00000400
70#define SDHCI_DATA_AVAILABLE 0x00000800
71#define SDHCI_CARD_PRESENT 0x00010000
72#define SDHCI_WRITE_PROTECT 0x00080000
73#define SDHCI_DATA_LVL_MASK 0x00F00000
74#define SDHCI_DATA_LVL_SHIFT 20
75#define SDHCI_DATA_0_LVL_MASK 0x00100000
76
77#define SDHCI_HOST_CONTROL 0x28
78#define SDHCI_CTRL_LED 0x01
79#define SDHCI_CTRL_4BITBUS 0x02
80#define SDHCI_CTRL_HISPD 0x04
81#define SDHCI_CTRL_DMA_MASK 0x18
82#define SDHCI_CTRL_SDMA 0x00
83#define SDHCI_CTRL_ADMA1 0x08
84#define SDHCI_CTRL_ADMA32 0x10
85#define SDHCI_CTRL_ADMA64 0x18
86#define SDHCI_CTRL_8BITBUS 0x20
87
88#define SDHCI_POWER_CONTROL 0x29
89#define SDHCI_POWER_ON 0x01
90#define SDHCI_POWER_180 0x0A
91#define SDHCI_POWER_300 0x0C
92#define SDHCI_POWER_330 0x0E
93
94#define SDHCI_BLOCK_GAP_CONTROL 0x2A
95
96#define SDHCI_WAKE_UP_CONTROL 0x2B
97#define SDHCI_WAKE_ON_INT 0x01
98#define SDHCI_WAKE_ON_INSERT 0x02
99#define SDHCI_WAKE_ON_REMOVE 0x04
100
101#define SDHCI_CLOCK_CONTROL 0x2C
102#define SDHCI_DIVIDER_SHIFT 8
103#define SDHCI_DIVIDER_HI_SHIFT 6
104#define SDHCI_DIV_MASK 0xFF
105#define SDHCI_DIV_MASK_LEN 8
106#define SDHCI_DIV_HI_MASK 0x300
107#define SDHCI_PROG_CLOCK_MODE 0x0020
108#define SDHCI_CLOCK_CARD_EN 0x0004
109#define SDHCI_CLOCK_INT_STABLE 0x0002
110#define SDHCI_CLOCK_INT_EN 0x0001
111
112#define SDHCI_TIMEOUT_CONTROL 0x2E
113
114#define SDHCI_SOFTWARE_RESET 0x2F
115#define SDHCI_RESET_ALL 0x01
116#define SDHCI_RESET_CMD 0x02
117#define SDHCI_RESET_DATA 0x04
118
119#define SDHCI_INT_STATUS 0x30
120#define SDHCI_INT_ENABLE 0x34
121#define SDHCI_SIGNAL_ENABLE 0x38
122#define SDHCI_INT_RESPONSE 0x00000001
123#define SDHCI_INT_DATA_END 0x00000002
124#define SDHCI_INT_BLK_GAP 0x00000004
125#define SDHCI_INT_DMA_END 0x00000008
126#define SDHCI_INT_SPACE_AVAIL 0x00000010
127#define SDHCI_INT_DATA_AVAIL 0x00000020
128#define SDHCI_INT_CARD_INSERT 0x00000040
129#define SDHCI_INT_CARD_REMOVE 0x00000080
130#define SDHCI_INT_CARD_INT 0x00000100
131#define SDHCI_INT_ERROR 0x00008000
132#define SDHCI_INT_TIMEOUT 0x00010000
133#define SDHCI_INT_CRC 0x00020000
134#define SDHCI_INT_END_BIT 0x00040000
135#define SDHCI_INT_INDEX 0x00080000
136#define SDHCI_INT_DATA_TIMEOUT 0x00100000
137#define SDHCI_INT_DATA_CRC 0x00200000
138#define SDHCI_INT_DATA_END_BIT 0x00400000
139#define SDHCI_INT_BUS_POWER 0x00800000
140#define SDHCI_INT_ACMD12ERR 0x01000000
141#define SDHCI_INT_ADMA_ERROR 0x02000000
142
143#define SDHCI_INT_NORMAL_MASK 0x00007FFF
144#define SDHCI_INT_ERROR_MASK 0xFFFF8000
145
146#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
147 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
148#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
149 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
150 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
151 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
152 SDHCI_INT_BLK_GAP)
153#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
154
155#define SDHCI_ACMD12_ERR 0x3C
156
157#define SDHCI_HOST_CONTROL2 0x3E
158#define SDHCI_CTRL_UHS_MASK 0x0007
159#define SDHCI_CTRL_UHS_SDR12 0x0000
160#define SDHCI_CTRL_UHS_SDR25 0x0001
161#define SDHCI_CTRL_UHS_SDR50 0x0002
162#define SDHCI_CTRL_UHS_SDR104 0x0003
163#define SDHCI_CTRL_UHS_DDR50 0x0004
164#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
165#define SDHCI_CTRL_VDD_180 0x0008
166#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
167#define SDHCI_CTRL_DRV_TYPE_B 0x0000
168#define SDHCI_CTRL_DRV_TYPE_A 0x0010
169#define SDHCI_CTRL_DRV_TYPE_C 0x0020
170#define SDHCI_CTRL_DRV_TYPE_D 0x0030
171#define SDHCI_CTRL_EXEC_TUNING 0x0040
172#define SDHCI_CTRL_TUNED_CLK 0x0080
173#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
174
175#define SDHCI_CAPABILITIES 0x40
176#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
177#define SDHCI_TIMEOUT_CLK_SHIFT 0
178#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
179#define SDHCI_CLOCK_BASE_MASK 0x00003F00
180#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
181#define SDHCI_CLOCK_BASE_SHIFT 8
182#define SDHCI_MAX_BLOCK_MASK 0x00030000
183#define SDHCI_MAX_BLOCK_SHIFT 16
184#define SDHCI_CAN_DO_8BIT 0x00040000
185#define SDHCI_CAN_DO_ADMA2 0x00080000
186#define SDHCI_CAN_DO_ADMA1 0x00100000
187#define SDHCI_CAN_DO_HISPD 0x00200000
188#define SDHCI_CAN_DO_SDMA 0x00400000
189#define SDHCI_CAN_VDD_330 0x01000000
190#define SDHCI_CAN_VDD_300 0x02000000
191#define SDHCI_CAN_VDD_180 0x04000000
192#define SDHCI_CAN_64BIT 0x10000000
193
194#define SDHCI_SUPPORT_SDR50 0x00000001
195#define SDHCI_SUPPORT_SDR104 0x00000002
196#define SDHCI_SUPPORT_DDR50 0x00000004
197#define SDHCI_DRIVER_TYPE_A 0x00000010
198#define SDHCI_DRIVER_TYPE_C 0x00000020
199#define SDHCI_DRIVER_TYPE_D 0x00000040
200#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00
201#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8
202#define SDHCI_USE_SDR50_TUNING 0x00002000
203#define SDHCI_RETUNING_MODE_MASK 0x0000C000
204#define SDHCI_RETUNING_MODE_SHIFT 14
205#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
206#define SDHCI_CLOCK_MUL_SHIFT 16
207#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
208
209#define SDHCI_CAPABILITIES_1 0x44
210
211#define SDHCI_MAX_CURRENT 0x48
212#define SDHCI_MAX_CURRENT_LIMIT 0xFF
213#define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
214#define SDHCI_MAX_CURRENT_330_SHIFT 0
215#define SDHCI_MAX_CURRENT_300_MASK 0x00FF00
216#define SDHCI_MAX_CURRENT_300_SHIFT 8
217#define SDHCI_MAX_CURRENT_180_MASK 0xFF0000
218#define SDHCI_MAX_CURRENT_180_SHIFT 16
219#define SDHCI_MAX_CURRENT_MULTIPLIER 4
220
221/* 4C-4F reserved for more max current */
222
223#define SDHCI_SET_ACMD12_ERROR 0x50
224#define SDHCI_SET_INT_ERROR 0x52
225
226#define SDHCI_ADMA_ERROR 0x54
227
228/* 55-57 reserved */
229
230#define SDHCI_ADMA_ADDRESS 0x58
231#define SDHCI_ADMA_ADDRESS_HI 0x5C
232
233/* 60-FB reserved */
234
235#define SDHCI_PRESET_FOR_SDR12 0x66
236#define SDHCI_PRESET_FOR_SDR25 0x68
237#define SDHCI_PRESET_FOR_SDR50 0x6A
238#define SDHCI_PRESET_FOR_SDR104 0x6C
239#define SDHCI_PRESET_FOR_DDR50 0x6E
240#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
241#define SDHCI_PRESET_DRV_MASK 0xC000
242#define SDHCI_PRESET_DRV_SHIFT 14
243#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
244#define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10
245#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
246#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
247
248#define SDHCI_SLOT_INT_STATUS 0xFC
249
250#define SDHCI_HOST_VERSION 0xFE
251#define SDHCI_VENDOR_VER_MASK 0xFF00
252#define SDHCI_VENDOR_VER_SHIFT 8
253#define SDHCI_SPEC_VER_MASK 0x00FF
254#define SDHCI_SPEC_VER_SHIFT 0
255#define SDHCI_SPEC_100 0
256#define SDHCI_SPEC_200 1
257#define SDHCI_SPEC_300 2
258
259/*
260 * End of controller registers.
261 */
262
263#define SDHCI_MAX_DIV_SPEC_200 256
264#define SDHCI_MAX_DIV_SPEC_300 2046
265
266/*
267 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
268 */
269#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
270#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
271
272/* ADMA2 32-bit DMA descriptor size */
273#define SDHCI_ADMA2_32_DESC_SZ 8
274
275/* ADMA2 32-bit descriptor */
276struct sdhci_adma2_32_desc {
277 __le16 cmd;
278 __le16 len;
279 __le32 addr;
280} __packed __aligned(4);
281
282/* ADMA2 data alignment */
283#define SDHCI_ADMA2_ALIGN 4
284#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1)
285
286/*
287 * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte
288 * alignment for the descriptor table even in 32-bit DMA mode. Memory
289 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
290 */
291#define SDHCI_ADMA2_DESC_ALIGN 8
292
293/* ADMA2 64-bit DMA descriptor size */
294#define SDHCI_ADMA2_64_DESC_SZ 12
295
296/*
297 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
298 * aligned.
299 */
300struct sdhci_adma2_64_desc {
301 __le16 cmd;
302 __le16 len;
303 __le32 addr_lo;
304 __le32 addr_hi;
305} __packed __aligned(4);
306
307#define ADMA2_TRAN_VALID 0x21
308#define ADMA2_NOP_END_VALID 0x3
309#define ADMA2_END 0x2
310
311/*
312 * Maximum segments assuming a 512KiB maximum requisition size and a minimum
313 * 4KiB page size.
314 */
315#define SDHCI_MAX_SEGS 128
316
317enum sdhci_cookie {
318 COOKIE_UNMAPPED,
319 COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
320 COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */
321};
322
323struct sdhci_host {
324 /* Data set by hardware interface driver */
325 const char *hw_name; /* Hardware bus name */
326
327 unsigned int quirks; /* Deviations from spec. */
328
329/* Controller doesn't honor resets unless we touch the clock register */
330#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
331/* Controller has bad caps bits, but really supports DMA */
332#define SDHCI_QUIRK_FORCE_DMA (1<<1)
333/* Controller doesn't like to be reset when there is no card inserted. */
334#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
335/* Controller doesn't like clearing the power reg before a change */
336#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
337/* Controller has flaky internal state so reset it on each ios change */
338#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
339/* Controller has an unusable DMA engine */
340#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
341/* Controller has an unusable ADMA engine */
342#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
343/* Controller can only DMA from 32-bit aligned addresses */
344#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
345/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
346#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
347/* Controller can only ADMA chunks that are a multiple of 32 bits */
348#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
349/* Controller needs to be reset after each request to stay stable */
350#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
351/* Controller needs voltage and power writes to happen separately */
352#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
353/* Controller provides an incorrect timeout value for transfers */
354#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
355/* Controller has an issue with buffer bits for small transfers */
356#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
357/* Controller does not provide transfer-complete interrupt when not busy */
358#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
359/* Controller has unreliable card detection */
360#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
361/* Controller reports inverted write-protect state */
362#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
363/* Controller does not like fast PIO transfers */
364#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
365/* Controller has to be forced to use block size of 2048 bytes */
366#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
367/* Controller cannot do multi-block transfers */
368#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
369/* Controller can only handle 1-bit data transfers */
370#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
371/* Controller needs 10ms delay between applying power and clock */
372#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
373/* Controller uses SDCLK instead of TMCLK for data timeouts */
374#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
375/* Controller reports wrong base clock capability */
376#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
377/* Controller cannot support End Attribute in NOP ADMA descriptor */
378#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
379/* Controller is missing device caps. Use caps provided by host */
380#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
381/* Controller uses Auto CMD12 command to stop the transfer */
382#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
383/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
384#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
385/* Controller treats ADMA descriptors with length 0000h incorrectly */
386#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30)
387/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
388#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31)
389
390 unsigned int quirks2; /* More deviations from spec. */
391
392#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
393#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
394/* The system physically doesn't support 1.8v, even if the host does */
395#define SDHCI_QUIRK2_NO_1_8_V (1<<2)
396#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
397#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
398/* Controller has a non-standard host control register */
399#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
400/* Controller does not support HS200 */
401#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
402/* Controller does not support DDR50 */
403#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
404/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
405#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
406/* Controller does not support 64-bit DMA */
407#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
408/* need clear transfer mode register before send cmd */
409#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
410/* Capability register bit-63 indicates HS400 support */
411#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
412/* forced tuned clock */
413#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12)
414/* disable the block count for single block transactions */
415#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13)
416/* Controller broken with using ACMD23 */
417#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
418/* Broken Clock divider zero in controller */
419#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
420/*
421 * When internal clock is disabled, a delay is needed before modifying the
422 * SD clock frequency or enabling back the internal clock.
423 */
424#define SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST (1<<16)
425
426 int irq; /* Device IRQ */
427 void __iomem *ioaddr; /* Mapped address */
428
429 const struct sdhci_ops *ops; /* Low level hw interface */
430
431 /* Internal data */
432 struct mmc_host *mmc; /* MMC structure */
433 struct mmc_host_ops mmc_host_ops; /* MMC host ops */
434 u64 dma_mask; /* custom DMA mask */
435
436#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
437 struct led_classdev led; /* LED control */
438 char led_name[32];
439#endif
440
441 spinlock_t lock; /* Mutex */
442
443 int flags; /* Host attributes */
444#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
445#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
446#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
447#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
448#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
449#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */
450#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */
451#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */
452#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
453#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */
454#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
455#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
456
457 unsigned int version; /* SDHCI spec. version */
458
459 unsigned int max_clk; /* Max possible freq (MHz) */
460 unsigned int timeout_clk; /* Timeout freq (KHz) */
461 unsigned int clk_mul; /* Clock Muliplier value */
462
463 unsigned int clock; /* Current clock (MHz) */
464 u8 pwr; /* Current voltage */
465
466 bool runtime_suspended; /* Host is runtime suspended */
467 bool bus_on; /* Bus power prevents runtime suspend */
468 bool preset_enabled; /* Preset is enabled */
469
470 struct mmc_request *mrq; /* Current request */
471 struct mmc_command *cmd; /* Current command */
472 struct mmc_data *data; /* Current data request */
473 unsigned int data_early:1; /* Data finished before cmd */
474 unsigned int busy_handle:1; /* Handling the order of Busy-end */
475
476 struct sg_mapping_iter sg_miter; /* SG state for PIO */
477 unsigned int blocks; /* remaining PIO blocks */
478
479 int sg_count; /* Mapped sg entries */
480
481 void *adma_table; /* ADMA descriptor table */
482 void *align_buffer; /* Bounce buffer */
483
484 size_t adma_table_sz; /* ADMA descriptor table size */
485 size_t align_buffer_sz; /* Bounce buffer size */
486
487 dma_addr_t adma_addr; /* Mapped ADMA descr. table */
488 dma_addr_t align_addr; /* Mapped bounce buffer */
489
490 unsigned int desc_sz; /* ADMA descriptor size */
491
492 struct tasklet_struct finish_tasklet; /* Tasklet structures */
493
494 struct timer_list timer; /* Timer for timeouts */
495
496 u32 caps; /* Alternative CAPABILITY_0 */
497 u32 caps1; /* Alternative CAPABILITY_1 */
498
499 unsigned int ocr_avail_sdio; /* OCR bit masks */
500 unsigned int ocr_avail_sd;
501 unsigned int ocr_avail_mmc;
502 u32 ocr_mask; /* available voltages */
503
504 unsigned timing; /* Current timing */
505
506 u32 thread_isr;
507
508 /* cached registers */
509 u32 ier;
510
511 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */
512 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */
513
514 unsigned int tuning_count; /* Timer count for re-tuning */
515 unsigned int tuning_mode; /* Re-tuning mode supported by host */
516#define SDHCI_TUNING_MODE_1 0
517
518 unsigned long private[0] ____cacheline_aligned;
519};
520
521struct sdhci_ops {
522#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
523 u32 (*read_l)(struct sdhci_host *host, int reg);
524 u16 (*read_w)(struct sdhci_host *host, int reg);
525 u8 (*read_b)(struct sdhci_host *host, int reg);
526 void (*write_l)(struct sdhci_host *host, u32 val, int reg);
527 void (*write_w)(struct sdhci_host *host, u16 val, int reg);
528 void (*write_b)(struct sdhci_host *host, u8 val, int reg);
529#endif
530
531 void (*set_clock)(struct sdhci_host *host, unsigned int clock);
532 void (*set_power)(struct sdhci_host *host, unsigned char mode,
533 unsigned short vdd);
534
535 int (*enable_dma)(struct sdhci_host *host);
536 unsigned int (*get_max_clock)(struct sdhci_host *host);
537 unsigned int (*get_min_clock)(struct sdhci_host *host);
538 unsigned int (*get_timeout_clock)(struct sdhci_host *host);
539 unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
540 void (*set_timeout)(struct sdhci_host *host,
541 struct mmc_command *cmd);
542 void (*set_bus_width)(struct sdhci_host *host, int width);
543 void (*platform_send_init_74_clocks)(struct sdhci_host *host,
544 u8 power_mode);
545 unsigned int (*get_ro)(struct sdhci_host *host);
546 void (*reset)(struct sdhci_host *host, u8 mask);
547 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode);
548 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
549 void (*hw_reset)(struct sdhci_host *host);
550 void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
551 void (*platform_init)(struct sdhci_host *host);
552 void (*card_event)(struct sdhci_host *host);
553 void (*voltage_switch)(struct sdhci_host *host);
554 int (*select_drive_strength)(struct sdhci_host *host,
555 struct mmc_card *card,
556 unsigned int max_dtr, int host_drv,
557 int card_drv, int *drv_type);
558};
559
560#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
561
562static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
563{
564 if (unlikely(host->ops->write_l))
565 host->ops->write_l(host, val, reg);
566 else
567 writel(val, host->ioaddr + reg);
568}
569
570static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
571{
572 if (unlikely(host->ops->write_w))
573 host->ops->write_w(host, val, reg);
574 else
575 writew(val, host->ioaddr + reg);
576}
577
578static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
579{
580 if (unlikely(host->ops->write_b))
581 host->ops->write_b(host, val, reg);
582 else
583 writeb(val, host->ioaddr + reg);
584}
585
586static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
587{
588 if (unlikely(host->ops->read_l))
589 return host->ops->read_l(host, reg);
590 else
591 return readl(host->ioaddr + reg);
592}
593
594static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
595{
596 if (unlikely(host->ops->read_w))
597 return host->ops->read_w(host, reg);
598 else
599 return readw(host->ioaddr + reg);
600}
601
602static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
603{
604 if (unlikely(host->ops->read_b))
605 return host->ops->read_b(host, reg);
606 else
607 return readb(host->ioaddr + reg);
608}
609
610#else
611
612static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
613{
614 writel(val, host->ioaddr + reg);
615}
616
617static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
618{
619 writew(val, host->ioaddr + reg);
620}
621
622static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
623{
624 writeb(val, host->ioaddr + reg);
625}
626
627static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
628{
629 return readl(host->ioaddr + reg);
630}
631
632static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
633{
634 return readw(host->ioaddr + reg);
635}
636
637static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
638{
639 return readb(host->ioaddr + reg);
640}
641
642#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
643
644extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
645 size_t priv_size);
646extern void sdhci_free_host(struct sdhci_host *host);
647
648static inline void *sdhci_priv(struct sdhci_host *host)
649{
650 return (void *)host->private;
651}
652
653extern void sdhci_card_detect(struct sdhci_host *host);
654extern int sdhci_add_host(struct sdhci_host *host);
655extern void sdhci_remove_host(struct sdhci_host *host, int dead);
656extern void sdhci_send_command(struct sdhci_host *host,
657 struct mmc_command *cmd);
658
659static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
660{
661 return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED);
662}
663
664void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
665void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
666 unsigned short vdd);
667void sdhci_set_bus_width(struct sdhci_host *host, int width);
668void sdhci_reset(struct sdhci_host *host, u8 mask);
669void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
670
671#ifdef CONFIG_PM
672extern int sdhci_suspend_host(struct sdhci_host *host);
673extern int sdhci_resume_host(struct sdhci_host *host);
674extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
675extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
676extern int sdhci_runtime_resume_host(struct sdhci_host *host);
677#endif
678
679#endif /* __SDHCI_HW_H */