Loading...
1// SPDX-License-Identifier: GPL-2.0+
2//
3// MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
4// Copyright 2008 Juergen Beisert, kernel@pengutronix.de
5//
6// Based on code from Freescale Semiconductor,
7// Authors: Daniel Mack, Juergen Beisert.
8// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
9
10#include <linux/clk.h>
11#include <linux/err.h>
12#include <linux/init.h>
13#include <linux/interrupt.h>
14#include <linux/io.h>
15#include <linux/irq.h>
16#include <linux/irqdomain.h>
17#include <linux/irqchip/chained_irq.h>
18#include <linux/module.h>
19#include <linux/platform_device.h>
20#include <linux/slab.h>
21#include <linux/spinlock.h>
22#include <linux/syscore_ops.h>
23#include <linux/gpio/driver.h>
24#include <linux/of.h>
25#include <linux/of_device.h>
26#include <linux/bug.h>
27
28#define IMX_SCU_WAKEUP_OFF 0
29#define IMX_SCU_WAKEUP_LOW_LVL 4
30#define IMX_SCU_WAKEUP_FALL_EDGE 5
31#define IMX_SCU_WAKEUP_RISE_EDGE 6
32#define IMX_SCU_WAKEUP_HIGH_LVL 7
33
34/* device type dependent stuff */
35struct mxc_gpio_hwdata {
36 unsigned dr_reg;
37 unsigned gdir_reg;
38 unsigned psr_reg;
39 unsigned icr1_reg;
40 unsigned icr2_reg;
41 unsigned imr_reg;
42 unsigned isr_reg;
43 int edge_sel_reg;
44 unsigned low_level;
45 unsigned high_level;
46 unsigned rise_edge;
47 unsigned fall_edge;
48};
49
50struct mxc_gpio_reg_saved {
51 u32 icr1;
52 u32 icr2;
53 u32 imr;
54 u32 gdir;
55 u32 edge_sel;
56 u32 dr;
57};
58
59struct mxc_gpio_port {
60 struct list_head node;
61 void __iomem *base;
62 struct clk *clk;
63 int irq;
64 int irq_high;
65 struct irq_domain *domain;
66 struct gpio_chip gc;
67 struct device *dev;
68 u32 both_edges;
69 struct mxc_gpio_reg_saved gpio_saved_reg;
70 bool power_off;
71 u32 wakeup_pads;
72 bool is_pad_wakeup;
73 u32 pad_type[32];
74 const struct mxc_gpio_hwdata *hwdata;
75};
76
77static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
78 .dr_reg = 0x1c,
79 .gdir_reg = 0x00,
80 .psr_reg = 0x24,
81 .icr1_reg = 0x28,
82 .icr2_reg = 0x2c,
83 .imr_reg = 0x30,
84 .isr_reg = 0x34,
85 .edge_sel_reg = -EINVAL,
86 .low_level = 0x03,
87 .high_level = 0x02,
88 .rise_edge = 0x00,
89 .fall_edge = 0x01,
90};
91
92static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
93 .dr_reg = 0x00,
94 .gdir_reg = 0x04,
95 .psr_reg = 0x08,
96 .icr1_reg = 0x0c,
97 .icr2_reg = 0x10,
98 .imr_reg = 0x14,
99 .isr_reg = 0x18,
100 .edge_sel_reg = -EINVAL,
101 .low_level = 0x00,
102 .high_level = 0x01,
103 .rise_edge = 0x02,
104 .fall_edge = 0x03,
105};
106
107static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
108 .dr_reg = 0x00,
109 .gdir_reg = 0x04,
110 .psr_reg = 0x08,
111 .icr1_reg = 0x0c,
112 .icr2_reg = 0x10,
113 .imr_reg = 0x14,
114 .isr_reg = 0x18,
115 .edge_sel_reg = 0x1c,
116 .low_level = 0x00,
117 .high_level = 0x01,
118 .rise_edge = 0x02,
119 .fall_edge = 0x03,
120};
121
122#define GPIO_DR (port->hwdata->dr_reg)
123#define GPIO_GDIR (port->hwdata->gdir_reg)
124#define GPIO_PSR (port->hwdata->psr_reg)
125#define GPIO_ICR1 (port->hwdata->icr1_reg)
126#define GPIO_ICR2 (port->hwdata->icr2_reg)
127#define GPIO_IMR (port->hwdata->imr_reg)
128#define GPIO_ISR (port->hwdata->isr_reg)
129#define GPIO_EDGE_SEL (port->hwdata->edge_sel_reg)
130
131#define GPIO_INT_LOW_LEV (port->hwdata->low_level)
132#define GPIO_INT_HIGH_LEV (port->hwdata->high_level)
133#define GPIO_INT_RISE_EDGE (port->hwdata->rise_edge)
134#define GPIO_INT_FALL_EDGE (port->hwdata->fall_edge)
135#define GPIO_INT_BOTH_EDGES 0x4
136
137static const struct of_device_id mxc_gpio_dt_ids[] = {
138 { .compatible = "fsl,imx1-gpio", .data = &imx1_imx21_gpio_hwdata },
139 { .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
140 { .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
141 { .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
142 { .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
143 { .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
144 { .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
145 { .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
146 { /* sentinel */ }
147};
148MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
149
150/*
151 * MX2 has one interrupt *for all* gpio ports. The list is used
152 * to save the references to all ports, so that mx2_gpio_irq_handler
153 * can walk through all interrupt status registers.
154 */
155static LIST_HEAD(mxc_gpio_ports);
156
157/* Note: This driver assumes 32 GPIOs are handled in one register */
158
159static int gpio_set_irq_type(struct irq_data *d, u32 type)
160{
161 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
162 struct mxc_gpio_port *port = gc->private;
163 unsigned long flags;
164 u32 bit, val;
165 u32 gpio_idx = d->hwirq;
166 int edge;
167 void __iomem *reg = port->base;
168
169 port->both_edges &= ~(1 << gpio_idx);
170 switch (type) {
171 case IRQ_TYPE_EDGE_RISING:
172 edge = GPIO_INT_RISE_EDGE;
173 break;
174 case IRQ_TYPE_EDGE_FALLING:
175 edge = GPIO_INT_FALL_EDGE;
176 break;
177 case IRQ_TYPE_EDGE_BOTH:
178 if (GPIO_EDGE_SEL >= 0) {
179 edge = GPIO_INT_BOTH_EDGES;
180 } else {
181 val = port->gc.get(&port->gc, gpio_idx);
182 if (val) {
183 edge = GPIO_INT_LOW_LEV;
184 pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx);
185 } else {
186 edge = GPIO_INT_HIGH_LEV;
187 pr_debug("mxc: set GPIO %d to high trigger\n", gpio_idx);
188 }
189 port->both_edges |= 1 << gpio_idx;
190 }
191 break;
192 case IRQ_TYPE_LEVEL_LOW:
193 edge = GPIO_INT_LOW_LEV;
194 break;
195 case IRQ_TYPE_LEVEL_HIGH:
196 edge = GPIO_INT_HIGH_LEV;
197 break;
198 default:
199 return -EINVAL;
200 }
201
202 raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
203
204 if (GPIO_EDGE_SEL >= 0) {
205 val = readl(port->base + GPIO_EDGE_SEL);
206 if (edge == GPIO_INT_BOTH_EDGES)
207 writel(val | (1 << gpio_idx),
208 port->base + GPIO_EDGE_SEL);
209 else
210 writel(val & ~(1 << gpio_idx),
211 port->base + GPIO_EDGE_SEL);
212 }
213
214 if (edge != GPIO_INT_BOTH_EDGES) {
215 reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
216 bit = gpio_idx & 0xf;
217 val = readl(reg) & ~(0x3 << (bit << 1));
218 writel(val | (edge << (bit << 1)), reg);
219 }
220
221 writel(1 << gpio_idx, port->base + GPIO_ISR);
222 port->pad_type[gpio_idx] = type;
223
224 raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
225
226 return port->gc.direction_input(&port->gc, gpio_idx);
227}
228
229static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
230{
231 void __iomem *reg = port->base;
232 unsigned long flags;
233 u32 bit, val;
234 int edge;
235
236 raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
237
238 reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
239 bit = gpio & 0xf;
240 val = readl(reg);
241 edge = (val >> (bit << 1)) & 3;
242 val &= ~(0x3 << (bit << 1));
243 if (edge == GPIO_INT_HIGH_LEV) {
244 edge = GPIO_INT_LOW_LEV;
245 pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
246 } else if (edge == GPIO_INT_LOW_LEV) {
247 edge = GPIO_INT_HIGH_LEV;
248 pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
249 } else {
250 pr_err("mxc: invalid configuration for GPIO %d: %x\n",
251 gpio, edge);
252 goto unlock;
253 }
254 writel(val | (edge << (bit << 1)), reg);
255
256unlock:
257 raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
258}
259
260/* handle 32 interrupts in one status register */
261static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
262{
263 while (irq_stat != 0) {
264 int irqoffset = fls(irq_stat) - 1;
265
266 if (port->both_edges & (1 << irqoffset))
267 mxc_flip_edge(port, irqoffset);
268
269 generic_handle_domain_irq(port->domain, irqoffset);
270
271 irq_stat &= ~(1 << irqoffset);
272 }
273}
274
275/* MX1 and MX3 has one interrupt *per* gpio port */
276static void mx3_gpio_irq_handler(struct irq_desc *desc)
277{
278 u32 irq_stat;
279 struct mxc_gpio_port *port = irq_desc_get_handler_data(desc);
280 struct irq_chip *chip = irq_desc_get_chip(desc);
281
282 if (port->is_pad_wakeup)
283 return;
284
285 chained_irq_enter(chip, desc);
286
287 irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
288
289 mxc_gpio_irq_handler(port, irq_stat);
290
291 chained_irq_exit(chip, desc);
292}
293
294/* MX2 has one interrupt *for all* gpio ports */
295static void mx2_gpio_irq_handler(struct irq_desc *desc)
296{
297 u32 irq_msk, irq_stat;
298 struct mxc_gpio_port *port;
299 struct irq_chip *chip = irq_desc_get_chip(desc);
300
301 chained_irq_enter(chip, desc);
302
303 /* walk through all interrupt status registers */
304 list_for_each_entry(port, &mxc_gpio_ports, node) {
305 irq_msk = readl(port->base + GPIO_IMR);
306 if (!irq_msk)
307 continue;
308
309 irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
310 if (irq_stat)
311 mxc_gpio_irq_handler(port, irq_stat);
312 }
313 chained_irq_exit(chip, desc);
314}
315
316/*
317 * Set interrupt number "irq" in the GPIO as a wake-up source.
318 * While system is running, all registered GPIO interrupts need to have
319 * wake-up enabled. When system is suspended, only selected GPIO interrupts
320 * need to have wake-up enabled.
321 * @param irq interrupt source number
322 * @param enable enable as wake-up if equal to non-zero
323 * @return This function returns 0 on success.
324 */
325static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
326{
327 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
328 struct mxc_gpio_port *port = gc->private;
329 u32 gpio_idx = d->hwirq;
330 int ret;
331
332 if (enable) {
333 if (port->irq_high && (gpio_idx >= 16))
334 ret = enable_irq_wake(port->irq_high);
335 else
336 ret = enable_irq_wake(port->irq);
337 port->wakeup_pads |= (1 << gpio_idx);
338 } else {
339 if (port->irq_high && (gpio_idx >= 16))
340 ret = disable_irq_wake(port->irq_high);
341 else
342 ret = disable_irq_wake(port->irq);
343 port->wakeup_pads &= ~(1 << gpio_idx);
344 }
345
346 return ret;
347}
348
349static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
350{
351 struct irq_chip_generic *gc;
352 struct irq_chip_type *ct;
353 int rv;
354
355 gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxc", 1, irq_base,
356 port->base, handle_level_irq);
357 if (!gc)
358 return -ENOMEM;
359 gc->private = port;
360
361 ct = gc->chip_types;
362 ct->chip.irq_ack = irq_gc_ack_set_bit;
363 ct->chip.irq_mask = irq_gc_mask_clr_bit;
364 ct->chip.irq_unmask = irq_gc_mask_set_bit;
365 ct->chip.irq_set_type = gpio_set_irq_type;
366 ct->chip.irq_set_wake = gpio_set_wake_irq;
367 ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND;
368 ct->regs.ack = GPIO_ISR;
369 ct->regs.mask = GPIO_IMR;
370
371 rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32),
372 IRQ_GC_INIT_NESTED_LOCK,
373 IRQ_NOREQUEST, 0);
374
375 return rv;
376}
377
378static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
379{
380 struct mxc_gpio_port *port = gpiochip_get_data(gc);
381
382 return irq_find_mapping(port->domain, offset);
383}
384
385static int mxc_gpio_probe(struct platform_device *pdev)
386{
387 struct device_node *np = pdev->dev.of_node;
388 struct mxc_gpio_port *port;
389 int irq_count;
390 int irq_base;
391 int err;
392
393 port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
394 if (!port)
395 return -ENOMEM;
396
397 port->dev = &pdev->dev;
398 port->hwdata = device_get_match_data(&pdev->dev);
399
400 port->base = devm_platform_ioremap_resource(pdev, 0);
401 if (IS_ERR(port->base))
402 return PTR_ERR(port->base);
403
404 irq_count = platform_irq_count(pdev);
405 if (irq_count < 0)
406 return irq_count;
407
408 if (irq_count > 1) {
409 port->irq_high = platform_get_irq(pdev, 1);
410 if (port->irq_high < 0)
411 port->irq_high = 0;
412 }
413
414 port->irq = platform_get_irq(pdev, 0);
415 if (port->irq < 0)
416 return port->irq;
417
418 /* the controller clock is optional */
419 port->clk = devm_clk_get_optional(&pdev->dev, NULL);
420 if (IS_ERR(port->clk))
421 return PTR_ERR(port->clk);
422
423 err = clk_prepare_enable(port->clk);
424 if (err) {
425 dev_err(&pdev->dev, "Unable to enable clock.\n");
426 return err;
427 }
428
429 if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
430 port->power_off = true;
431
432 /* disable the interrupt and clear the status */
433 writel(0, port->base + GPIO_IMR);
434 writel(~0, port->base + GPIO_ISR);
435
436 if (of_device_is_compatible(np, "fsl,imx21-gpio")) {
437 /*
438 * Setup one handler for all GPIO interrupts. Actually setting
439 * the handler is needed only once, but doing it for every port
440 * is more robust and easier.
441 */
442 irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
443 } else {
444 /* setup one handler for each entry */
445 irq_set_chained_handler_and_data(port->irq,
446 mx3_gpio_irq_handler, port);
447 if (port->irq_high > 0)
448 /* setup handler for GPIO 16 to 31 */
449 irq_set_chained_handler_and_data(port->irq_high,
450 mx3_gpio_irq_handler,
451 port);
452 }
453
454 err = bgpio_init(&port->gc, &pdev->dev, 4,
455 port->base + GPIO_PSR,
456 port->base + GPIO_DR, NULL,
457 port->base + GPIO_GDIR, NULL,
458 BGPIOF_READ_OUTPUT_REG_SET);
459 if (err)
460 goto out_bgio;
461
462 port->gc.request = gpiochip_generic_request;
463 port->gc.free = gpiochip_generic_free;
464 port->gc.to_irq = mxc_gpio_to_irq;
465 port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
466 pdev->id * 32;
467
468 err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
469 if (err)
470 goto out_bgio;
471
472 irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
473 if (irq_base < 0) {
474 err = irq_base;
475 goto out_bgio;
476 }
477
478 port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
479 &irq_domain_simple_ops, NULL);
480 if (!port->domain) {
481 err = -ENODEV;
482 goto out_bgio;
483 }
484
485 /* gpio-mxc can be a generic irq chip */
486 err = mxc_gpio_init_gc(port, irq_base);
487 if (err < 0)
488 goto out_irqdomain_remove;
489
490 list_add_tail(&port->node, &mxc_gpio_ports);
491
492 platform_set_drvdata(pdev, port);
493
494 return 0;
495
496out_irqdomain_remove:
497 irq_domain_remove(port->domain);
498out_bgio:
499 clk_disable_unprepare(port->clk);
500 dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
501 return err;
502}
503
504static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
505{
506 if (!port->power_off)
507 return;
508
509 port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
510 port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2);
511 port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR);
512 port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR);
513 port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL);
514 port->gpio_saved_reg.dr = readl(port->base + GPIO_DR);
515}
516
517static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
518{
519 if (!port->power_off)
520 return;
521
522 writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
523 writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2);
524 writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR);
525 writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR);
526 writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL);
527 writel(port->gpio_saved_reg.dr, port->base + GPIO_DR);
528}
529
530static bool mxc_gpio_generic_config(struct mxc_gpio_port *port,
531 unsigned int offset, unsigned long conf)
532{
533 struct device_node *np = port->dev->of_node;
534
535 if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") ||
536 of_device_is_compatible(np, "fsl,imx8qxp-gpio") ||
537 of_device_is_compatible(np, "fsl,imx8qm-gpio"))
538 return (gpiochip_generic_config(&port->gc, offset, conf) == 0);
539
540 return false;
541}
542
543static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
544{
545 unsigned long config;
546 bool ret = false;
547 int i, type;
548
549 static const u32 pad_type_map[] = {
550 IMX_SCU_WAKEUP_OFF, /* 0 */
551 IMX_SCU_WAKEUP_RISE_EDGE, /* IRQ_TYPE_EDGE_RISING */
552 IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_FALLING */
553 IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_BOTH */
554 IMX_SCU_WAKEUP_HIGH_LVL, /* IRQ_TYPE_LEVEL_HIGH */
555 IMX_SCU_WAKEUP_OFF, /* 5 */
556 IMX_SCU_WAKEUP_OFF, /* 6 */
557 IMX_SCU_WAKEUP_OFF, /* 7 */
558 IMX_SCU_WAKEUP_LOW_LVL, /* IRQ_TYPE_LEVEL_LOW */
559 };
560
561 for (i = 0; i < 32; i++) {
562 if ((port->wakeup_pads & (1 << i))) {
563 type = port->pad_type[i];
564 if (enable)
565 config = pad_type_map[type];
566 else
567 config = IMX_SCU_WAKEUP_OFF;
568 ret |= mxc_gpio_generic_config(port, i, config);
569 }
570 }
571
572 return ret;
573}
574
575static int __maybe_unused mxc_gpio_noirq_suspend(struct device *dev)
576{
577 struct platform_device *pdev = to_platform_device(dev);
578 struct mxc_gpio_port *port = platform_get_drvdata(pdev);
579
580 if (port->wakeup_pads > 0)
581 port->is_pad_wakeup = mxc_gpio_set_pad_wakeup(port, true);
582
583 return 0;
584}
585
586static int __maybe_unused mxc_gpio_noirq_resume(struct device *dev)
587{
588 struct platform_device *pdev = to_platform_device(dev);
589 struct mxc_gpio_port *port = platform_get_drvdata(pdev);
590
591 if (port->wakeup_pads > 0)
592 mxc_gpio_set_pad_wakeup(port, false);
593 port->is_pad_wakeup = false;
594
595 return 0;
596}
597
598static const struct dev_pm_ops mxc_gpio_dev_pm_ops = {
599 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume)
600};
601
602static int mxc_gpio_syscore_suspend(void)
603{
604 struct mxc_gpio_port *port;
605
606 /* walk through all ports */
607 list_for_each_entry(port, &mxc_gpio_ports, node) {
608 mxc_gpio_save_regs(port);
609 clk_disable_unprepare(port->clk);
610 }
611
612 return 0;
613}
614
615static void mxc_gpio_syscore_resume(void)
616{
617 struct mxc_gpio_port *port;
618 int ret;
619
620 /* walk through all ports */
621 list_for_each_entry(port, &mxc_gpio_ports, node) {
622 ret = clk_prepare_enable(port->clk);
623 if (ret) {
624 pr_err("mxc: failed to enable gpio clock %d\n", ret);
625 return;
626 }
627 mxc_gpio_restore_regs(port);
628 }
629}
630
631static struct syscore_ops mxc_gpio_syscore_ops = {
632 .suspend = mxc_gpio_syscore_suspend,
633 .resume = mxc_gpio_syscore_resume,
634};
635
636static struct platform_driver mxc_gpio_driver = {
637 .driver = {
638 .name = "gpio-mxc",
639 .of_match_table = mxc_gpio_dt_ids,
640 .suppress_bind_attrs = true,
641 .pm = &mxc_gpio_dev_pm_ops,
642 },
643 .probe = mxc_gpio_probe,
644};
645
646static int __init gpio_mxc_init(void)
647{
648 register_syscore_ops(&mxc_gpio_syscore_ops);
649
650 return platform_driver_register(&mxc_gpio_driver);
651}
652subsys_initcall(gpio_mxc_init);
653
654MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
655MODULE_DESCRIPTION("i.MX GPIO Driver");
656MODULE_LICENSE("GPL");
1/*
2 * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
3 * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
4 *
5 * Based on code from Freescale,
6 * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version 2
11 * of the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
20 */
21
22#include <linux/init.h>
23#include <linux/interrupt.h>
24#include <linux/io.h>
25#include <linux/irq.h>
26#include <linux/gpio.h>
27#include <linux/platform_device.h>
28#include <linux/slab.h>
29#include <linux/basic_mmio_gpio.h>
30#include <linux/of.h>
31#include <linux/of_device.h>
32#include <asm-generic/bug.h>
33
34enum mxc_gpio_hwtype {
35 IMX1_GPIO, /* runs on i.mx1 */
36 IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
37 IMX31_GPIO, /* runs on all other i.mx */
38};
39
40/* device type dependent stuff */
41struct mxc_gpio_hwdata {
42 unsigned dr_reg;
43 unsigned gdir_reg;
44 unsigned psr_reg;
45 unsigned icr1_reg;
46 unsigned icr2_reg;
47 unsigned imr_reg;
48 unsigned isr_reg;
49 unsigned low_level;
50 unsigned high_level;
51 unsigned rise_edge;
52 unsigned fall_edge;
53};
54
55struct mxc_gpio_port {
56 struct list_head node;
57 void __iomem *base;
58 int irq;
59 int irq_high;
60 int virtual_irq_start;
61 struct bgpio_chip bgc;
62 u32 both_edges;
63};
64
65static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
66 .dr_reg = 0x1c,
67 .gdir_reg = 0x00,
68 .psr_reg = 0x24,
69 .icr1_reg = 0x28,
70 .icr2_reg = 0x2c,
71 .imr_reg = 0x30,
72 .isr_reg = 0x34,
73 .low_level = 0x03,
74 .high_level = 0x02,
75 .rise_edge = 0x00,
76 .fall_edge = 0x01,
77};
78
79static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
80 .dr_reg = 0x00,
81 .gdir_reg = 0x04,
82 .psr_reg = 0x08,
83 .icr1_reg = 0x0c,
84 .icr2_reg = 0x10,
85 .imr_reg = 0x14,
86 .isr_reg = 0x18,
87 .low_level = 0x00,
88 .high_level = 0x01,
89 .rise_edge = 0x02,
90 .fall_edge = 0x03,
91};
92
93static enum mxc_gpio_hwtype mxc_gpio_hwtype;
94static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
95
96#define GPIO_DR (mxc_gpio_hwdata->dr_reg)
97#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg)
98#define GPIO_PSR (mxc_gpio_hwdata->psr_reg)
99#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg)
100#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg)
101#define GPIO_IMR (mxc_gpio_hwdata->imr_reg)
102#define GPIO_ISR (mxc_gpio_hwdata->isr_reg)
103
104#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level)
105#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level)
106#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge)
107#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge)
108#define GPIO_INT_NONE 0x4
109
110static struct platform_device_id mxc_gpio_devtype[] = {
111 {
112 .name = "imx1-gpio",
113 .driver_data = IMX1_GPIO,
114 }, {
115 .name = "imx21-gpio",
116 .driver_data = IMX21_GPIO,
117 }, {
118 .name = "imx31-gpio",
119 .driver_data = IMX31_GPIO,
120 }, {
121 /* sentinel */
122 }
123};
124
125static const struct of_device_id mxc_gpio_dt_ids[] = {
126 { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
127 { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
128 { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
129 { /* sentinel */ }
130};
131
132/*
133 * MX2 has one interrupt *for all* gpio ports. The list is used
134 * to save the references to all ports, so that mx2_gpio_irq_handler
135 * can walk through all interrupt status registers.
136 */
137static LIST_HEAD(mxc_gpio_ports);
138
139/* Note: This driver assumes 32 GPIOs are handled in one register */
140
141static int gpio_set_irq_type(struct irq_data *d, u32 type)
142{
143 u32 gpio = irq_to_gpio(d->irq);
144 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
145 struct mxc_gpio_port *port = gc->private;
146 u32 bit, val;
147 int edge;
148 void __iomem *reg = port->base;
149
150 port->both_edges &= ~(1 << (gpio & 31));
151 switch (type) {
152 case IRQ_TYPE_EDGE_RISING:
153 edge = GPIO_INT_RISE_EDGE;
154 break;
155 case IRQ_TYPE_EDGE_FALLING:
156 edge = GPIO_INT_FALL_EDGE;
157 break;
158 case IRQ_TYPE_EDGE_BOTH:
159 val = gpio_get_value(gpio);
160 if (val) {
161 edge = GPIO_INT_LOW_LEV;
162 pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
163 } else {
164 edge = GPIO_INT_HIGH_LEV;
165 pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
166 }
167 port->both_edges |= 1 << (gpio & 31);
168 break;
169 case IRQ_TYPE_LEVEL_LOW:
170 edge = GPIO_INT_LOW_LEV;
171 break;
172 case IRQ_TYPE_LEVEL_HIGH:
173 edge = GPIO_INT_HIGH_LEV;
174 break;
175 default:
176 return -EINVAL;
177 }
178
179 reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
180 bit = gpio & 0xf;
181 val = readl(reg) & ~(0x3 << (bit << 1));
182 writel(val | (edge << (bit << 1)), reg);
183 writel(1 << (gpio & 0x1f), port->base + GPIO_ISR);
184
185 return 0;
186}
187
188static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
189{
190 void __iomem *reg = port->base;
191 u32 bit, val;
192 int edge;
193
194 reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
195 bit = gpio & 0xf;
196 val = readl(reg);
197 edge = (val >> (bit << 1)) & 3;
198 val &= ~(0x3 << (bit << 1));
199 if (edge == GPIO_INT_HIGH_LEV) {
200 edge = GPIO_INT_LOW_LEV;
201 pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
202 } else if (edge == GPIO_INT_LOW_LEV) {
203 edge = GPIO_INT_HIGH_LEV;
204 pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
205 } else {
206 pr_err("mxc: invalid configuration for GPIO %d: %x\n",
207 gpio, edge);
208 return;
209 }
210 writel(val | (edge << (bit << 1)), reg);
211}
212
213/* handle 32 interrupts in one status register */
214static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
215{
216 u32 gpio_irq_no_base = port->virtual_irq_start;
217
218 while (irq_stat != 0) {
219 int irqoffset = fls(irq_stat) - 1;
220
221 if (port->both_edges & (1 << irqoffset))
222 mxc_flip_edge(port, irqoffset);
223
224 generic_handle_irq(gpio_irq_no_base + irqoffset);
225
226 irq_stat &= ~(1 << irqoffset);
227 }
228}
229
230/* MX1 and MX3 has one interrupt *per* gpio port */
231static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
232{
233 u32 irq_stat;
234 struct mxc_gpio_port *port = irq_get_handler_data(irq);
235
236 irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
237
238 mxc_gpio_irq_handler(port, irq_stat);
239}
240
241/* MX2 has one interrupt *for all* gpio ports */
242static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
243{
244 u32 irq_msk, irq_stat;
245 struct mxc_gpio_port *port;
246
247 /* walk through all interrupt status registers */
248 list_for_each_entry(port, &mxc_gpio_ports, node) {
249 irq_msk = readl(port->base + GPIO_IMR);
250 if (!irq_msk)
251 continue;
252
253 irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
254 if (irq_stat)
255 mxc_gpio_irq_handler(port, irq_stat);
256 }
257}
258
259/*
260 * Set interrupt number "irq" in the GPIO as a wake-up source.
261 * While system is running, all registered GPIO interrupts need to have
262 * wake-up enabled. When system is suspended, only selected GPIO interrupts
263 * need to have wake-up enabled.
264 * @param irq interrupt source number
265 * @param enable enable as wake-up if equal to non-zero
266 * @return This function returns 0 on success.
267 */
268static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
269{
270 u32 gpio = irq_to_gpio(d->irq);
271 u32 gpio_idx = gpio & 0x1F;
272 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
273 struct mxc_gpio_port *port = gc->private;
274
275 if (enable) {
276 if (port->irq_high && (gpio_idx >= 16))
277 enable_irq_wake(port->irq_high);
278 else
279 enable_irq_wake(port->irq);
280 } else {
281 if (port->irq_high && (gpio_idx >= 16))
282 disable_irq_wake(port->irq_high);
283 else
284 disable_irq_wake(port->irq);
285 }
286
287 return 0;
288}
289
290static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)
291{
292 struct irq_chip_generic *gc;
293 struct irq_chip_type *ct;
294
295 gc = irq_alloc_generic_chip("gpio-mxc", 1, port->virtual_irq_start,
296 port->base, handle_level_irq);
297 gc->private = port;
298
299 ct = gc->chip_types;
300 ct->chip.irq_ack = irq_gc_ack_set_bit;
301 ct->chip.irq_mask = irq_gc_mask_clr_bit;
302 ct->chip.irq_unmask = irq_gc_mask_set_bit;
303 ct->chip.irq_set_type = gpio_set_irq_type;
304 ct->chip.irq_set_wake = gpio_set_wake_irq;
305 ct->regs.ack = GPIO_ISR;
306 ct->regs.mask = GPIO_IMR;
307
308 irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
309 IRQ_NOREQUEST, 0);
310}
311
312static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
313{
314 const struct of_device_id *of_id =
315 of_match_device(mxc_gpio_dt_ids, &pdev->dev);
316 enum mxc_gpio_hwtype hwtype;
317
318 if (of_id)
319 pdev->id_entry = of_id->data;
320 hwtype = pdev->id_entry->driver_data;
321
322 if (mxc_gpio_hwtype) {
323 /*
324 * The driver works with a reasonable presupposition,
325 * that is all gpio ports must be the same type when
326 * running on one soc.
327 */
328 BUG_ON(mxc_gpio_hwtype != hwtype);
329 return;
330 }
331
332 if (hwtype == IMX31_GPIO)
333 mxc_gpio_hwdata = &imx31_gpio_hwdata;
334 else
335 mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;
336
337 mxc_gpio_hwtype = hwtype;
338}
339
340static int __devinit mxc_gpio_probe(struct platform_device *pdev)
341{
342 struct device_node *np = pdev->dev.of_node;
343 struct mxc_gpio_port *port;
344 struct resource *iores;
345 int err;
346
347 mxc_gpio_get_hw(pdev);
348
349 port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL);
350 if (!port)
351 return -ENOMEM;
352
353 iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
354 if (!iores) {
355 err = -ENODEV;
356 goto out_kfree;
357 }
358
359 if (!request_mem_region(iores->start, resource_size(iores),
360 pdev->name)) {
361 err = -EBUSY;
362 goto out_kfree;
363 }
364
365 port->base = ioremap(iores->start, resource_size(iores));
366 if (!port->base) {
367 err = -ENOMEM;
368 goto out_release_mem;
369 }
370
371 port->irq_high = platform_get_irq(pdev, 1);
372 port->irq = platform_get_irq(pdev, 0);
373 if (port->irq < 0) {
374 err = -EINVAL;
375 goto out_iounmap;
376 }
377
378 /* disable the interrupt and clear the status */
379 writel(0, port->base + GPIO_IMR);
380 writel(~0, port->base + GPIO_ISR);
381
382 if (mxc_gpio_hwtype == IMX21_GPIO) {
383 /* setup one handler for all GPIO interrupts */
384 if (pdev->id == 0)
385 irq_set_chained_handler(port->irq,
386 mx2_gpio_irq_handler);
387 } else {
388 /* setup one handler for each entry */
389 irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
390 irq_set_handler_data(port->irq, port);
391 if (port->irq_high > 0) {
392 /* setup handler for GPIO 16 to 31 */
393 irq_set_chained_handler(port->irq_high,
394 mx3_gpio_irq_handler);
395 irq_set_handler_data(port->irq_high, port);
396 }
397 }
398
399 err = bgpio_init(&port->bgc, &pdev->dev, 4,
400 port->base + GPIO_PSR,
401 port->base + GPIO_DR, NULL,
402 port->base + GPIO_GDIR, NULL, false);
403 if (err)
404 goto out_iounmap;
405
406 port->bgc.gc.base = pdev->id * 32;
407 port->bgc.dir = port->bgc.read_reg(port->bgc.reg_dir);
408 port->bgc.data = port->bgc.read_reg(port->bgc.reg_set);
409
410 err = gpiochip_add(&port->bgc.gc);
411 if (err)
412 goto out_bgpio_remove;
413
414 /*
415 * In dt case, we use gpio number range dynamically
416 * allocated by gpio core.
417 */
418 port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base :
419 pdev->id * 32);
420
421 /* gpio-mxc can be a generic irq chip */
422 mxc_gpio_init_gc(port);
423
424 list_add_tail(&port->node, &mxc_gpio_ports);
425
426 return 0;
427
428out_bgpio_remove:
429 bgpio_remove(&port->bgc);
430out_iounmap:
431 iounmap(port->base);
432out_release_mem:
433 release_mem_region(iores->start, resource_size(iores));
434out_kfree:
435 kfree(port);
436 dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
437 return err;
438}
439
440static struct platform_driver mxc_gpio_driver = {
441 .driver = {
442 .name = "gpio-mxc",
443 .owner = THIS_MODULE,
444 .of_match_table = mxc_gpio_dt_ids,
445 },
446 .probe = mxc_gpio_probe,
447 .id_table = mxc_gpio_devtype,
448};
449
450static int __init gpio_mxc_init(void)
451{
452 return platform_driver_register(&mxc_gpio_driver);
453}
454postcore_initcall(gpio_mxc_init);
455
456MODULE_AUTHOR("Freescale Semiconductor, "
457 "Daniel Mack <danielncaiaq.de>, "
458 "Juergen Beisert <kernel@pengutronix.de>");
459MODULE_DESCRIPTION("Freescale MXC GPIO");
460MODULE_LICENSE("GPL");