Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# Copyright 2008 Openmoko, Inc.
4# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
5
6menuconfig ARCH_S3C64XX
7 bool "Samsung S3C64XX (deprecated, see help)"
8 depends on ARCH_MULTI_V6
9 select ARM_AMBA
10 select ARM_VIC
11 select CLKSRC_SAMSUNG_PWM
12 select COMMON_CLK_SAMSUNG
13 select GPIO_SAMSUNG if ATAGS
14 select GPIOLIB
15 select HAVE_TCM
16 select PLAT_SAMSUNG
17 select PM_GENERIC_DOMAINS if PM
18 select S3C_GPIO_TRACK if ATAGS
19 select S3C2410_WATCHDOG
20 select SAMSUNG_ATAGS if ATAGS
21 select SAMSUNG_WAKEMASK if PM
22 select WATCHDOG
23 help
24 Samsung S3C64XX series based systems
25
26 The platform is deprecated and scheduled for removal. Please reach to
27 the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
28 you still use it.
29 Without such feedback, the platform will be removed after 2024.
30
31if ARCH_S3C64XX
32
33# Configuration options for the S3C6410 CPU
34
35config CPU_S3C6400
36 bool
37 help
38 Enable S3C6400 CPU support
39
40config CPU_S3C6410
41 bool
42 help
43 Enable S3C6410 CPU support
44
45config S3C64XX_PL080
46 def_bool DMADEVICES
47 select AMBA_PL08X
48
49config S3C64XX_SETUP_SDHCI
50 bool
51 select S3C64XX_SETUP_SDHCI_GPIO
52 help
53 Internal configuration for default SDHCI setup for S3C6400 and
54 S3C6410 SoCs.
55
56# platform specific device setup
57
58config S3C64XX_SETUP_I2C0
59 bool
60 default y
61 help
62 Common setup code for i2c bus 0.
63
64 Note, currently since i2c0 is always compiled, this setup helper
65 is always compiled with it.
66
67config S3C64XX_SETUP_I2C1
68 bool
69 help
70 Common setup code for i2c bus 1.
71
72config S3C64XX_SETUP_FB_24BPP
73 bool
74 help
75 Common setup code for S3C64XX with an 24bpp RGB display helper.
76
77config S3C64XX_SETUP_KEYPAD
78 bool
79 help
80 Common setup code for S3C64XX KEYPAD GPIO configurations
81
82config S3C64XX_SETUP_SDHCI_GPIO
83 bool
84 help
85 Common setup code for S3C64XX SDHCI GPIO configurations
86
87config S3C64XX_SETUP_SPI
88 bool
89 help
90 Common setup code for SPI GPIO configurations
91
92config S3C64XX_SETUP_USB_PHY
93 bool
94 help
95 Common setup code for USB PHY controller
96
97# S36400 Macchine support
98
99config MACH_WLF_CRAGG_6410
100 bool "Wolfson Cragganmore 6410"
101 depends on ATAGS
102 depends on I2C=y
103 select CPU_S3C6410
104 select LEDS_GPIO_REGISTER
105 select S3C64XX_DEV_SPI0
106 select S3C64XX_SETUP_FB_24BPP
107 select S3C64XX_SETUP_I2C1
108 select S3C64XX_SETUP_KEYPAD
109 select S3C64XX_SETUP_SDHCI
110 select S3C64XX_SETUP_SPI
111 select S3C64XX_SETUP_USB_PHY
112 select S3C_DEV_FB
113 select S3C_DEV_HSMMC
114 select S3C_DEV_HSMMC1
115 select S3C_DEV_HSMMC2
116 select S3C_DEV_I2C1
117 select S3C_DEV_USB_HOST
118 select S3C_DEV_USB_HSOTG
119 select SAMSUNG_DEV_KEYPAD
120 select SAMSUNG_DEV_PWM
121 help
122 Machine support for the Wolfson Cragganmore S3C6410 variant.
123
124config MACH_S3C64XX_DT
125 bool "Samsung S3C6400/S3C6410 machine using Device Tree"
126 select CPU_S3C6400
127 select CPU_S3C6410
128 select PINCTRL
129 select PINCTRL_S3C64XX
130 help
131 Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
132 enabled.
133 Select this if a fdt blob is available for your S3C64XX SoC based
134 board.
135 Note: This is under development and not all peripherals can be
136 supported with this machine file.
137
138endif
1# SPDX-License-Identifier: GPL-2.0
2#
3# Copyright 2008 Openmoko, Inc.
4# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
5
6menuconfig ARCH_S3C64XX
7 bool "Samsung S3C64XX (deprecated, see help)"
8 depends on ARCH_MULTI_V6
9 select ARM_AMBA
10 select ARM_VIC
11 select CLKSRC_SAMSUNG_PWM
12 select COMMON_CLK_SAMSUNG
13 select GPIO_SAMSUNG if ATAGS
14 select GPIOLIB
15 select HAVE_TCM
16 select PLAT_SAMSUNG
17 select PM_GENERIC_DOMAINS if PM
18 select S3C_DEV_NAND if ATAGS
19 select S3C_GPIO_TRACK if ATAGS
20 select S3C2410_WATCHDOG
21 select SAMSUNG_ATAGS if ATAGS
22 select SAMSUNG_WAKEMASK if PM
23 select WATCHDOG
24 help
25 Samsung S3C64XX series based systems
26
27 The platform is deprecated and scheduled for removal. Please reach to
28 the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
29 you still use it.
30 Without such feedback, the platform will be removed after 2024.
31
32if ARCH_S3C64XX
33
34# Configuration options for the S3C6410 CPU
35
36config CPU_S3C6400
37 bool
38 help
39 Enable S3C6400 CPU support
40
41config CPU_S3C6410
42 bool
43 help
44 Enable S3C6410 CPU support
45
46config S3C64XX_PL080
47 def_bool DMADEVICES
48 select AMBA_PL08X
49
50config S3C64XX_SETUP_SDHCI
51 bool
52 select S3C64XX_SETUP_SDHCI_GPIO
53 help
54 Internal configuration for default SDHCI setup for S3C6400 and
55 S3C6410 SoCs.
56
57config S3C64XX_DEV_ONENAND1
58 bool
59 help
60 Compile in platform device definition for OneNAND1 controller
61
62config SAMSUNG_DEV_BACKLIGHT
63 bool
64 depends on SAMSUNG_DEV_PWM
65 help
66 Compile in platform device definition LCD backlight with PWM Timer
67
68# platform specific device setup
69
70config S3C64XX_SETUP_I2C0
71 bool
72 default y
73 help
74 Common setup code for i2c bus 0.
75
76 Note, currently since i2c0 is always compiled, this setup helper
77 is always compiled with it.
78
79config S3C64XX_SETUP_I2C1
80 bool
81 help
82 Common setup code for i2c bus 1.
83
84config S3C64XX_SETUP_IDE
85 bool
86 help
87 Common setup code for S3C64XX IDE.
88
89config S3C64XX_SETUP_FB_24BPP
90 bool
91 help
92 Common setup code for S3C64XX with an 24bpp RGB display helper.
93
94config S3C64XX_SETUP_KEYPAD
95 bool
96 help
97 Common setup code for S3C64XX KEYPAD GPIO configurations
98
99config S3C64XX_SETUP_SDHCI_GPIO
100 bool
101 help
102 Common setup code for S3C64XX SDHCI GPIO configurations
103
104config S3C64XX_SETUP_SPI
105 bool
106 help
107 Common setup code for SPI GPIO configurations
108
109config S3C64XX_SETUP_USB_PHY
110 bool
111 help
112 Common setup code for USB PHY controller
113
114# S36400 Macchine support
115
116config MACH_SMDK6400
117 bool "SMDK6400"
118 depends on ATAGS && UNUSED_BOARD_FILES
119 select CPU_S3C6400
120 select S3C64XX_SETUP_SDHCI
121 select S3C_DEV_HSMMC1
122 help
123 Machine support for the Samsung SMDK6400
124
125# S3C6410 machine support
126
127config MACH_ANW6410
128 bool "A&W6410"
129 depends on ATAGS && UNUSED_BOARD_FILES
130 select CPU_S3C6410
131 select S3C64XX_SETUP_FB_24BPP
132 select S3C_DEV_FB
133 help
134 Machine support for the A&W6410
135
136config MACH_MINI6410
137 bool "MINI6410"
138 depends on ATAGS && UNUSED_BOARD_FILES
139 select CPU_S3C6410
140 select S3C64XX_SETUP_FB_24BPP
141 select S3C64XX_SETUP_SDHCI
142 select S3C_DEV_FB
143 select S3C_DEV_HSMMC
144 select S3C_DEV_HSMMC1
145 select S3C_DEV_NAND
146 select S3C_DEV_USB_HOST
147 select SAMSUNG_DEV_ADC
148 select SAMSUNG_DEV_TS
149 help
150 Machine support for the FriendlyARM MINI6410
151
152config MACH_REAL6410
153 bool "REAL6410"
154 depends on ATAGS && UNUSED_BOARD_FILES
155 select CPU_S3C6410
156 select S3C64XX_SETUP_FB_24BPP
157 select S3C64XX_SETUP_SDHCI
158 select S3C_DEV_FB
159 select S3C_DEV_HSMMC
160 select S3C_DEV_HSMMC1
161 select S3C_DEV_NAND
162 select S3C_DEV_USB_HOST
163 select SAMSUNG_DEV_ADC
164 select SAMSUNG_DEV_TS
165 help
166 Machine support for the CoreWind REAL6410
167
168config MACH_SMDK6410
169 bool "SMDK6410"
170 depends on ATAGS && UNUSED_BOARD_FILES
171 select CPU_S3C6410
172 select S3C64XX_SETUP_FB_24BPP
173 select S3C64XX_SETUP_I2C1
174 select S3C64XX_SETUP_IDE
175 select S3C64XX_SETUP_KEYPAD
176 select S3C64XX_SETUP_SDHCI
177 select S3C64XX_SETUP_USB_PHY
178 select S3C_DEV_FB
179 select S3C_DEV_HSMMC
180 select S3C_DEV_HSMMC1
181 select S3C_DEV_I2C1
182 select S3C_DEV_RTC
183 select S3C_DEV_USB_HOST
184 select S3C_DEV_USB_HSOTG
185 select S3C_DEV_WDT
186 select SAMSUNG_DEV_ADC
187 select SAMSUNG_DEV_BACKLIGHT
188 select SAMSUNG_DEV_IDE
189 select SAMSUNG_DEV_KEYPAD
190 select SAMSUNG_DEV_PWM
191 select SAMSUNG_DEV_TS
192 help
193 Machine support for the Samsung SMDK6410
194
195# At least some of the SMDK6410s were shipped with the card detect
196# for the MMC/SD slots connected to the same input. This means that
197# either the boards need to be altered to have channel0 to an alternate
198# configuration or that only one slot can be used.
199
200choice
201 prompt "SMDK6410 MMC/SD slot setup"
202 depends on MACH_SMDK6410
203
204config SMDK6410_SD_CH0
205 bool "Use channel 0 only"
206 depends on MACH_SMDK6410
207 help
208 Select CON7 (channel 0) as the MMC/SD slot, as
209 at least some SMDK6410 boards come with the
210 resistors fitted so that the card detects for
211 channels 0 and 1 are the same.
212
213config SMDK6410_SD_CH1
214 bool "Use channel 1 only"
215 depends on MACH_SMDK6410
216 help
217 Select CON6 (channel 1) as the MMC/SD slot, as
218 at least some SMDK6410 boards come with the
219 resistors fitted so that the card detects for
220 channels 0 and 1 are the same.
221
222endchoice
223
224config SMDK6410_WM1190_EV1
225 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
226 depends on MACH_SMDK6410
227 depends on I2C=y
228 select MFD_WM8350_I2C
229 select REGULATOR
230 select REGULATOR_WM8350
231 help
232 The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
233 and audio daughtercard for the Samsung SMDK6410 reference
234 platform. Enabling this option will build support for this
235 module into the kernel. The presence of the module will be
236 detected at runtime so the resulting kernel can be used
237 with or without the 1190-EV1 fitted.
238
239config SMDK6410_WM1192_EV1
240 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
241 depends on MACH_SMDK6410
242 depends on I2C=y
243 select MFD_WM831X
244 select MFD_WM831X_I2C
245 select REGULATOR
246 select REGULATOR_WM831X
247 help
248 The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
249 daughtercard for the Samsung SMDK6410 reference platform.
250 Enabling this option will build support for this module into
251 the kernel. The presence of the daughtercard will be
252 detected at runtime so the resulting kernel can be used
253 with or without the 1192-EV1 fitted.
254
255config MACH_NCP
256 bool "NCP"
257 depends on ATAGS && UNUSED_BOARD_FILES
258 select CPU_S3C6410
259 select S3C64XX_SETUP_I2C1
260 select S3C_DEV_HSMMC1
261 select S3C_DEV_I2C1
262 help
263 Machine support for the Samsung NCP
264
265config MACH_HMT
266 bool "Airgoo HMT"
267 depends on ATAGS && UNUSED_BOARD_FILES
268 select CPU_S3C6410
269 select S3C64XX_SETUP_FB_24BPP
270 select S3C_DEV_FB
271 select S3C_DEV_NAND
272 select S3C_DEV_USB_HOST
273 select SAMSUNG_DEV_PWM
274 help
275 Machine support for the Airgoo HMT
276
277config MACH_SMARTQ
278 bool
279 select CPU_S3C6410
280 select S3C64XX_SETUP_FB_24BPP
281 select S3C64XX_SETUP_SDHCI
282 select S3C64XX_SETUP_USB_PHY
283 select S3C_DEV_FB
284 select S3C_DEV_HSMMC
285 select S3C_DEV_HSMMC1
286 select S3C_DEV_HSMMC2
287 select S3C_DEV_HWMON
288 select S3C_DEV_RTC
289 select S3C_DEV_USB_HOST
290 select S3C_DEV_USB_HSOTG
291 select SAMSUNG_DEV_ADC
292 select SAMSUNG_DEV_PWM
293 select SAMSUNG_DEV_TS
294 help
295 Shared machine support for SmartQ 5/7
296
297config MACH_SMARTQ5
298 bool "SmartQ 5"
299 depends on ATAGS && UNUSED_BOARD_FILES
300 select MACH_SMARTQ
301 help
302 Machine support for the SmartQ 5
303
304config MACH_SMARTQ7
305 bool "SmartQ 7"
306 depends on ATAGS && UNUSED_BOARD_FILES
307 select MACH_SMARTQ
308 help
309 Machine support for the SmartQ 7
310
311config MACH_WLF_CRAGG_6410
312 bool "Wolfson Cragganmore 6410"
313 depends on ATAGS
314 depends on I2C=y
315 select CPU_S3C6410
316 select LEDS_GPIO_REGISTER
317 select S3C64XX_DEV_SPI0
318 select S3C64XX_SETUP_FB_24BPP
319 select S3C64XX_SETUP_I2C1
320 select S3C64XX_SETUP_IDE
321 select S3C64XX_SETUP_KEYPAD
322 select S3C64XX_SETUP_SDHCI
323 select S3C64XX_SETUP_SPI
324 select S3C64XX_SETUP_USB_PHY
325 select S3C_DEV_FB
326 select S3C_DEV_HSMMC
327 select S3C_DEV_HSMMC1
328 select S3C_DEV_HSMMC2
329 select S3C_DEV_I2C1
330 select S3C_DEV_RTC
331 select S3C_DEV_USB_HOST
332 select S3C_DEV_USB_HSOTG
333 select S3C_DEV_WDT
334 select SAMSUNG_DEV_ADC
335 select SAMSUNG_DEV_KEYPAD
336 select SAMSUNG_DEV_PWM
337 help
338 Machine support for the Wolfson Cragganmore S3C6410 variant.
339
340config MACH_S3C64XX_DT
341 bool "Samsung S3C6400/S3C6410 machine using Device Tree"
342 select CPU_S3C6400
343 select CPU_S3C6410
344 select PINCTRL
345 select PINCTRL_S3C64XX
346 help
347 Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
348 enabled.
349 Select this if a fdt blob is available for your S3C64XX SoC based
350 board.
351 Note: This is under development and not all peripherals can be
352 supported with this machine file.
353
354endif