Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# Copyright 2008 Openmoko, Inc.
4# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
5
6menuconfig ARCH_S3C64XX
7 bool "Samsung S3C64XX (deprecated, see help)"
8 depends on ARCH_MULTI_V6
9 select ARM_AMBA
10 select ARM_VIC
11 select CLKSRC_SAMSUNG_PWM
12 select COMMON_CLK_SAMSUNG
13 select GPIO_SAMSUNG if ATAGS
14 select GPIOLIB
15 select HAVE_TCM
16 select PLAT_SAMSUNG
17 select PM_GENERIC_DOMAINS if PM
18 select S3C_GPIO_TRACK if ATAGS
19 select S3C2410_WATCHDOG
20 select SAMSUNG_ATAGS if ATAGS
21 select SAMSUNG_WAKEMASK if PM
22 select WATCHDOG
23 help
24 Samsung S3C64XX series based systems
25
26 The platform is deprecated and scheduled for removal. Please reach to
27 the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
28 you still use it.
29 Without such feedback, the platform will be removed after 2024.
30
31if ARCH_S3C64XX
32
33# Configuration options for the S3C6410 CPU
34
35config CPU_S3C6400
36 bool
37 help
38 Enable S3C6400 CPU support
39
40config CPU_S3C6410
41 bool
42 help
43 Enable S3C6410 CPU support
44
45config S3C64XX_PL080
46 def_bool DMADEVICES
47 select AMBA_PL08X
48
49config S3C64XX_SETUP_SDHCI
50 bool
51 select S3C64XX_SETUP_SDHCI_GPIO
52 help
53 Internal configuration for default SDHCI setup for S3C6400 and
54 S3C6410 SoCs.
55
56# platform specific device setup
57
58config S3C64XX_SETUP_I2C0
59 bool
60 default y
61 help
62 Common setup code for i2c bus 0.
63
64 Note, currently since i2c0 is always compiled, this setup helper
65 is always compiled with it.
66
67config S3C64XX_SETUP_I2C1
68 bool
69 help
70 Common setup code for i2c bus 1.
71
72config S3C64XX_SETUP_FB_24BPP
73 bool
74 help
75 Common setup code for S3C64XX with an 24bpp RGB display helper.
76
77config S3C64XX_SETUP_KEYPAD
78 bool
79 help
80 Common setup code for S3C64XX KEYPAD GPIO configurations
81
82config S3C64XX_SETUP_SDHCI_GPIO
83 bool
84 help
85 Common setup code for S3C64XX SDHCI GPIO configurations
86
87config S3C64XX_SETUP_SPI
88 bool
89 help
90 Common setup code for SPI GPIO configurations
91
92config S3C64XX_SETUP_USB_PHY
93 bool
94 help
95 Common setup code for USB PHY controller
96
97# S36400 Macchine support
98
99config MACH_WLF_CRAGG_6410
100 bool "Wolfson Cragganmore 6410"
101 depends on ATAGS
102 depends on I2C=y
103 select CPU_S3C6410
104 select LEDS_GPIO_REGISTER
105 select S3C64XX_DEV_SPI0
106 select S3C64XX_SETUP_FB_24BPP
107 select S3C64XX_SETUP_I2C1
108 select S3C64XX_SETUP_KEYPAD
109 select S3C64XX_SETUP_SDHCI
110 select S3C64XX_SETUP_SPI
111 select S3C64XX_SETUP_USB_PHY
112 select S3C_DEV_FB
113 select S3C_DEV_HSMMC
114 select S3C_DEV_HSMMC1
115 select S3C_DEV_HSMMC2
116 select S3C_DEV_I2C1
117 select S3C_DEV_USB_HOST
118 select S3C_DEV_USB_HSOTG
119 select SAMSUNG_DEV_KEYPAD
120 select SAMSUNG_DEV_PWM
121 help
122 Machine support for the Wolfson Cragganmore S3C6410 variant.
123
124config MACH_S3C64XX_DT
125 bool "Samsung S3C6400/S3C6410 machine using Device Tree"
126 select CPU_S3C6400
127 select CPU_S3C6410
128 select PINCTRL
129 select PINCTRL_S3C64XX
130 help
131 Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
132 enabled.
133 Select this if a fdt blob is available for your S3C64XX SoC based
134 board.
135 Note: This is under development and not all peripherals can be
136 supported with this machine file.
137
138endif
1# SPDX-License-Identifier: GPL-2.0
2#
3# Copyright 2008 Openmoko, Inc.
4# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
5
6menuconfig ARCH_S3C64XX
7 bool "Samsung S3C64XX"
8 depends on ARCH_MULTI_V6
9 select ARM_AMBA
10 select ARM_VIC
11 select CLKSRC_SAMSUNG_PWM
12 select COMMON_CLK_SAMSUNG
13 select GPIO_SAMSUNG if ATAGS
14 select GPIOLIB
15 select HAVE_S3C2410_I2C if I2C
16 select HAVE_TCM
17 select PLAT_SAMSUNG
18 select PM_GENERIC_DOMAINS if PM
19 select S3C_DEV_NAND if ATAGS
20 select S3C_GPIO_TRACK if ATAGS
21 select S3C2410_WATCHDOG
22 select SAMSUNG_ATAGS if ATAGS
23 select SAMSUNG_WAKEMASK if PM
24 select WATCHDOG
25 help
26 Samsung S3C64XX series based systems
27
28if ARCH_S3C64XX
29
30# Configuration options for the S3C6410 CPU
31
32config CPU_S3C6400
33 bool
34 help
35 Enable S3C6400 CPU support
36
37config CPU_S3C6410
38 bool
39 help
40 Enable S3C6410 CPU support
41
42config S3C64XX_PL080
43 def_bool DMADEVICES
44 select AMBA_PL08X
45
46config S3C64XX_SETUP_SDHCI
47 bool
48 select S3C64XX_SETUP_SDHCI_GPIO
49 help
50 Internal configuration for default SDHCI setup for S3C6400 and
51 S3C6410 SoCs.
52
53config S3C64XX_DEV_ONENAND1
54 bool
55 help
56 Compile in platform device definition for OneNAND1 controller
57
58config SAMSUNG_DEV_BACKLIGHT
59 bool
60 depends on SAMSUNG_DEV_PWM
61 help
62 Compile in platform device definition LCD backlight with PWM Timer
63
64# platform specific device setup
65
66config S3C64XX_SETUP_I2C0
67 bool
68 default y
69 help
70 Common setup code for i2c bus 0.
71
72 Note, currently since i2c0 is always compiled, this setup helper
73 is always compiled with it.
74
75config S3C64XX_SETUP_I2C1
76 bool
77 help
78 Common setup code for i2c bus 1.
79
80config S3C64XX_SETUP_IDE
81 bool
82 help
83 Common setup code for S3C64XX IDE.
84
85config S3C64XX_SETUP_FB_24BPP
86 bool
87 help
88 Common setup code for S3C64XX with an 24bpp RGB display helper.
89
90config S3C64XX_SETUP_KEYPAD
91 bool
92 help
93 Common setup code for S3C64XX KEYPAD GPIO configurations
94
95config S3C64XX_SETUP_SDHCI_GPIO
96 bool
97 help
98 Common setup code for S3C64XX SDHCI GPIO configurations
99
100config S3C64XX_SETUP_SPI
101 bool
102 help
103 Common setup code for SPI GPIO configurations
104
105config S3C64XX_SETUP_USB_PHY
106 bool
107 help
108 Common setup code for USB PHY controller
109
110# S36400 Macchine support
111
112config MACH_SMDK6400
113 bool "SMDK6400"
114 depends on ATAGS
115 select CPU_S3C6400
116 select S3C64XX_SETUP_SDHCI
117 select S3C_DEV_HSMMC1
118 help
119 Machine support for the Samsung SMDK6400
120
121# S3C6410 machine support
122
123config MACH_ANW6410
124 bool "A&W6410"
125 depends on ATAGS
126 select CPU_S3C6410
127 select S3C64XX_SETUP_FB_24BPP
128 select S3C_DEV_FB
129 help
130 Machine support for the A&W6410
131
132config MACH_MINI6410
133 bool "MINI6410"
134 depends on ATAGS
135 select CPU_S3C6410
136 select S3C64XX_SETUP_FB_24BPP
137 select S3C64XX_SETUP_SDHCI
138 select S3C_DEV_FB
139 select S3C_DEV_HSMMC
140 select S3C_DEV_HSMMC1
141 select S3C_DEV_NAND
142 select S3C_DEV_USB_HOST
143 select SAMSUNG_DEV_ADC
144 select SAMSUNG_DEV_TS
145 help
146 Machine support for the FriendlyARM MINI6410
147
148config MACH_REAL6410
149 bool "REAL6410"
150 depends on ATAGS
151 select CPU_S3C6410
152 select S3C64XX_SETUP_FB_24BPP
153 select S3C64XX_SETUP_SDHCI
154 select S3C_DEV_FB
155 select S3C_DEV_HSMMC
156 select S3C_DEV_HSMMC1
157 select S3C_DEV_NAND
158 select S3C_DEV_USB_HOST
159 select SAMSUNG_DEV_ADC
160 select SAMSUNG_DEV_TS
161 help
162 Machine support for the CoreWind REAL6410
163
164config MACH_SMDK6410
165 bool "SMDK6410"
166 depends on ATAGS
167 select CPU_S3C6410
168 select S3C64XX_SETUP_FB_24BPP
169 select S3C64XX_SETUP_I2C1
170 select S3C64XX_SETUP_IDE
171 select S3C64XX_SETUP_KEYPAD
172 select S3C64XX_SETUP_SDHCI
173 select S3C64XX_SETUP_USB_PHY
174 select S3C_DEV_FB
175 select S3C_DEV_HSMMC
176 select S3C_DEV_HSMMC1
177 select S3C_DEV_I2C1
178 select S3C_DEV_RTC
179 select S3C_DEV_USB_HOST
180 select S3C_DEV_USB_HSOTG
181 select S3C_DEV_WDT
182 select SAMSUNG_DEV_ADC
183 select SAMSUNG_DEV_BACKLIGHT
184 select SAMSUNG_DEV_IDE
185 select SAMSUNG_DEV_KEYPAD
186 select SAMSUNG_DEV_PWM
187 select SAMSUNG_DEV_TS
188 help
189 Machine support for the Samsung SMDK6410
190
191# At least some of the SMDK6410s were shipped with the card detect
192# for the MMC/SD slots connected to the same input. This means that
193# either the boards need to be altered to have channel0 to an alternate
194# configuration or that only one slot can be used.
195
196choice
197 prompt "SMDK6410 MMC/SD slot setup"
198 depends on MACH_SMDK6410
199
200config SMDK6410_SD_CH0
201 bool "Use channel 0 only"
202 depends on MACH_SMDK6410
203 help
204 Select CON7 (channel 0) as the MMC/SD slot, as
205 at least some SMDK6410 boards come with the
206 resistors fitted so that the card detects for
207 channels 0 and 1 are the same.
208
209config SMDK6410_SD_CH1
210 bool "Use channel 1 only"
211 depends on MACH_SMDK6410
212 help
213 Select CON6 (channel 1) as the MMC/SD slot, as
214 at least some SMDK6410 boards come with the
215 resistors fitted so that the card detects for
216 channels 0 and 1 are the same.
217
218endchoice
219
220config SMDK6410_WM1190_EV1
221 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
222 depends on MACH_SMDK6410
223 depends on I2C=y
224 select MFD_WM8350_I2C
225 select REGULATOR
226 select REGULATOR_WM8350
227 help
228 The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
229 and audio daughtercard for the Samsung SMDK6410 reference
230 platform. Enabling this option will build support for this
231 module into the kernel. The presence of the module will be
232 detected at runtime so the resulting kernel can be used
233 with or without the 1190-EV1 fitted.
234
235config SMDK6410_WM1192_EV1
236 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
237 depends on MACH_SMDK6410
238 depends on I2C=y
239 select MFD_WM831X
240 select MFD_WM831X_I2C
241 select REGULATOR
242 select REGULATOR_WM831X
243 help
244 The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
245 daughtercard for the Samsung SMDK6410 reference platform.
246 Enabling this option will build support for this module into
247 the kernel. The presence of the daughtercard will be
248 detected at runtime so the resulting kernel can be used
249 with or without the 1192-EV1 fitted.
250
251config MACH_NCP
252 bool "NCP"
253 depends on ATAGS
254 select CPU_S3C6410
255 select S3C64XX_SETUP_I2C1
256 select S3C_DEV_HSMMC1
257 select S3C_DEV_I2C1
258 help
259 Machine support for the Samsung NCP
260
261config MACH_HMT
262 bool "Airgoo HMT"
263 depends on ATAGS
264 select CPU_S3C6410
265 select S3C64XX_SETUP_FB_24BPP
266 select S3C_DEV_FB
267 select S3C_DEV_NAND
268 select S3C_DEV_USB_HOST
269 select SAMSUNG_DEV_PWM
270 help
271 Machine support for the Airgoo HMT
272
273config MACH_SMARTQ
274 bool
275 select CPU_S3C6410
276 select S3C64XX_SETUP_FB_24BPP
277 select S3C64XX_SETUP_SDHCI
278 select S3C64XX_SETUP_USB_PHY
279 select S3C_DEV_FB
280 select S3C_DEV_HSMMC
281 select S3C_DEV_HSMMC1
282 select S3C_DEV_HSMMC2
283 select S3C_DEV_HWMON
284 select S3C_DEV_RTC
285 select S3C_DEV_USB_HOST
286 select S3C_DEV_USB_HSOTG
287 select SAMSUNG_DEV_ADC
288 select SAMSUNG_DEV_PWM
289 select SAMSUNG_DEV_TS
290 help
291 Shared machine support for SmartQ 5/7
292
293config MACH_SMARTQ5
294 bool "SmartQ 5"
295 depends on ATAGS
296 select MACH_SMARTQ
297 help
298 Machine support for the SmartQ 5
299
300config MACH_SMARTQ7
301 bool "SmartQ 7"
302 depends on ATAGS
303 select MACH_SMARTQ
304 help
305 Machine support for the SmartQ 7
306
307config MACH_WLF_CRAGG_6410
308 bool "Wolfson Cragganmore 6410"
309 depends on ATAGS
310 depends on I2C=y
311 select CPU_S3C6410
312 select LEDS_GPIO_REGISTER
313 select S3C64XX_DEV_SPI0
314 select S3C64XX_SETUP_FB_24BPP
315 select S3C64XX_SETUP_I2C1
316 select S3C64XX_SETUP_IDE
317 select S3C64XX_SETUP_KEYPAD
318 select S3C64XX_SETUP_SDHCI
319 select S3C64XX_SETUP_SPI
320 select S3C64XX_SETUP_USB_PHY
321 select S3C_DEV_FB
322 select S3C_DEV_HSMMC
323 select S3C_DEV_HSMMC1
324 select S3C_DEV_HSMMC2
325 select S3C_DEV_I2C1
326 select S3C_DEV_RTC
327 select S3C_DEV_USB_HOST
328 select S3C_DEV_USB_HSOTG
329 select S3C_DEV_WDT
330 select SAMSUNG_DEV_ADC
331 select SAMSUNG_DEV_KEYPAD
332 select SAMSUNG_DEV_PWM
333 help
334 Machine support for the Wolfson Cragganmore S3C6410 variant.
335
336config MACH_S3C64XX_DT
337 bool "Samsung S3C6400/S3C6410 machine using Device Tree"
338 select CPU_S3C6400
339 select CPU_S3C6410
340 select PINCTRL
341 select PINCTRL_S3C64XX
342 help
343 Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
344 enabled.
345 Select this if a fdt blob is available for your S3C64XX SoC based
346 board.
347 Note: This is under development and not all peripherals can be
348 supported with this machine file.
349
350endif