1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * linux/arch/arm/mach-omap1/fpga.c
  4 *
  5 * Interrupt handler for OMAP-1510 Innovator FPGA
  6 *
  7 * Copyright (C) 2001 RidgeRun, Inc.
  8 * Author: Greg Lonnon <glonnon@ridgerun.com>
  9 *
 10 * Copyright (C) 2002 MontaVista Software, Inc.
 11 *
 12 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
 13 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
 14 */
 15
 16#include <linux/types.h>
 17#include <linux/gpio.h>
 18#include <linux/init.h>
 19#include <linux/kernel.h>
 20#include <linux/device.h>
 21#include <linux/errno.h>
 22#include <linux/io.h>
 23
 24#include <asm/irq.h>
 25#include <asm/mach/irq.h>
 26
 27#include <mach/hardware.h>
 28
 29#include "iomap.h"
 30#include "common.h"
 31#include "fpga.h"
 32
 33static void fpga_mask_irq(struct irq_data *d)
 34{
 35	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
 36
 37	if (irq < 8)
 38		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
 39			      & ~(1 << irq)), OMAP1510_FPGA_IMR_LO);
 40	else if (irq < 16)
 41		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
 42			      & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
 43	else
 44		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
 45			      & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
 46}
 47
 48
 49static inline u32 get_fpga_unmasked_irqs(void)
 50{
 51	return
 52		((__raw_readb(OMAP1510_FPGA_ISR_LO) &
 53		  __raw_readb(OMAP1510_FPGA_IMR_LO))) |
 54		((__raw_readb(OMAP1510_FPGA_ISR_HI) &
 55		  __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) |
 56		((__raw_readb(INNOVATOR_FPGA_ISR2) &
 57		  __raw_readb(INNOVATOR_FPGA_IMR2)) << 16);
 58}
 59
 60
 61static void fpga_ack_irq(struct irq_data *d)
 62{
 63	/* Don't need to explicitly ACK FPGA interrupts */
 64}
 65
 66static void fpga_unmask_irq(struct irq_data *d)
 67{
 68	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
 69
 70	if (irq < 8)
 71		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
 72		     OMAP1510_FPGA_IMR_LO);
 73	else if (irq < 16)
 74		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
 75			      | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
 76	else
 77		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
 78			      | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
 79}
 80
 81static void fpga_mask_ack_irq(struct irq_data *d)
 82{
 83	fpga_mask_irq(d);
 84	fpga_ack_irq(d);
 85}
 86
 87static void innovator_fpga_IRQ_demux(struct irq_desc *desc)
 88{
 89	u32 stat;
 90	int fpga_irq;
 91
 92	stat = get_fpga_unmasked_irqs();
 93
 94	if (!stat)
 95		return;
 96
 97	for (fpga_irq = OMAP_FPGA_IRQ_BASE;
 98	     (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
 99	     fpga_irq++, stat >>= 1) {
100		if (stat & 1) {
101			generic_handle_irq(fpga_irq);
102		}
103	}
104}
105
106static struct irq_chip omap_fpga_irq_ack = {
107	.name		= "FPGA-ack",
108	.irq_ack	= fpga_mask_ack_irq,
109	.irq_mask	= fpga_mask_irq,
110	.irq_unmask	= fpga_unmask_irq,
111};
112
113
114static struct irq_chip omap_fpga_irq = {
115	.name		= "FPGA",
116	.irq_ack	= fpga_ack_irq,
117	.irq_mask	= fpga_mask_irq,
118	.irq_unmask	= fpga_unmask_irq,
119};
120
121/*
122 * All of the FPGA interrupt request inputs except for the touchscreen are
123 * edge-sensitive; the touchscreen is level-sensitive.  The edge-sensitive
124 * interrupts are acknowledged as a side-effect of reading the interrupt
125 * status register from the FPGA.  The edge-sensitive interrupt inputs
126 * cause a problem with level interrupt requests, such as Ethernet.  The
127 * problem occurs when a level interrupt request is asserted while its
128 * interrupt input is masked in the FPGA, which results in a missed
129 * interrupt.
130 *
131 * In an attempt to workaround the problem with missed interrupts, the
132 * mask_ack routine for all of the FPGA interrupts has been changed from
133 * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
134 * being serviced is left unmasked.  We can do this because the FPGA cascade
135 * interrupt is run with all interrupts masked.
136 *
137 * Limited testing indicates that this workaround appears to be effective
138 * for the smc9194 Ethernet driver used on the Innovator.  It should work
139 * on other FPGA interrupts as well, but any drivers that explicitly mask
140 * interrupts at the interrupt controller via disable_irq/enable_irq
141 * could pose a problem.
142 */
143void omap1510_fpga_init_irq(void)
144{
145	int i, res;
146
147	__raw_writeb(0, OMAP1510_FPGA_IMR_LO);
148	__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
149	__raw_writeb(0, INNOVATOR_FPGA_IMR2);
150
151	for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
152
153		if (i == OMAP1510_INT_FPGA_TS) {
154			/*
155			 * The touchscreen interrupt is level-sensitive, so
156			 * we'll use the regular mask_ack routine for it.
157			 */
158			irq_set_chip(i, &omap_fpga_irq_ack);
159		}
160		else {
161			/*
162			 * All FPGA interrupts except the touchscreen are
163			 * edge-sensitive, so we won't mask them.
164			 */
165			irq_set_chip(i, &omap_fpga_irq);
166		}
167
168		irq_set_handler(i, handle_edge_irq);
169		irq_clear_status_flags(i, IRQ_NOREQUEST);
170	}
171
172	/*
173	 * The FPGA interrupt line is connected to GPIO13. Claim this pin for
174	 * the ARM.
175	 *
176	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
177	 * gpio.[ch]
178	 */
179	res = gpio_request(13, "FPGA irq");
180	if (res) {
181		pr_err("%s failed to get gpio\n", __func__);
182		return;
183	}
184	gpio_direction_input(13);
185	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
186	irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
187}