Loading...
1# SPDX-License-Identifier: GPL-2.0
2# ==========================================================================
3# Building
4# ==========================================================================
5
6src := $(srcroot)/$(obj)
7
8PHONY := $(obj)/
9$(obj)/:
10
11# Init all relevant variables used in kbuild files so
12# 1) they have correct type
13# 2) they do not inherit any value from the environment
14obj-y :=
15obj-m :=
16lib-y :=
17lib-m :=
18always-y :=
19always-m :=
20targets :=
21subdir-y :=
22subdir-m :=
23EXTRA_AFLAGS :=
24EXTRA_CFLAGS :=
25EXTRA_CPPFLAGS :=
26EXTRA_LDFLAGS :=
27asflags-y :=
28ccflags-y :=
29rustflags-y :=
30cppflags-y :=
31ldflags-y :=
32
33subdir-asflags-y :=
34subdir-ccflags-y :=
35
36# Read auto.conf if it exists, otherwise ignore
37-include $(objtree)/include/config/auto.conf
38
39include $(srctree)/scripts/Kbuild.include
40include $(srctree)/scripts/Makefile.compiler
41include $(kbuild-file)
42include $(srctree)/scripts/Makefile.lib
43
44ifndef obj
45$(warning kbuild: Makefile.build is included improperly)
46endif
47
48ifeq ($(need-modorder),)
49ifneq ($(obj-m),)
50$(warning $(patsubst %.o,'%.ko',$(obj-m)) will not be built even though obj-m is specified.)
51$(warning You cannot use subdir-y/m to visit a module Makefile. Use obj-y/m instead.)
52endif
53endif
54
55# ===========================================================================
56
57# subdir-builtin and subdir-modorder may contain duplications. Use $(sort ...)
58subdir-builtin := $(sort $(filter %/built-in.a, $(real-obj-y)))
59subdir-modorder := $(sort $(filter %/modules.order, $(obj-m)))
60
61targets-for-builtin := $(extra-y)
62
63ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
64targets-for-builtin += $(obj)/lib.a
65endif
66
67ifdef need-builtin
68targets-for-builtin += $(obj)/built-in.a
69endif
70
71targets-for-modules := $(foreach x, o mod, \
72 $(patsubst %.o, %.$x, $(filter %.o, $(obj-m))))
73
74ifdef need-modorder
75targets-for-modules += $(obj)/modules.order
76endif
77
78targets += $(targets-for-builtin) $(targets-for-modules)
79
80# Linus' kernel sanity checking tool
81ifeq ($(KBUILD_CHECKSRC),1)
82 quiet_cmd_checksrc = CHECK $<
83 cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $<
84else ifeq ($(KBUILD_CHECKSRC),2)
85 quiet_cmd_force_checksrc = CHECK $<
86 cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $<
87endif
88
89ifneq ($(KBUILD_EXTRA_WARN),)
90 cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $(KDOCFLAGS) \
91 $(if $(findstring 2, $(KBUILD_EXTRA_WARN)), -Wall) \
92 $<
93endif
94
95# Compile C sources (.c)
96# ---------------------------------------------------------------------------
97
98quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
99 cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS) $(CC_FLAGS_LTO), $(c_flags)) -fverbose-asm -S -o $@ $<
100
101$(obj)/%.s: $(obj)/%.c FORCE
102 $(call if_changed_dep,cc_s_c)
103
104quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@
105cmd_cpp_i_c = $(CPP) $(c_flags) -o $@ $<
106
107$(obj)/%.i: $(obj)/%.c FORCE
108 $(call if_changed_dep,cpp_i_c)
109
110genksyms = $(objtree)/scripts/genksyms/genksyms \
111 $(if $(KBUILD_SYMTYPES), -T $(@:.o=.symtypes)) \
112 $(if $(KBUILD_PRESERVE), -p) \
113 $(addprefix -r , $(wildcard $(@:.o=.symref)))
114
115# These mirror gensymtypes_S and co below, keep them in synch.
116cmd_gensymtypes_c = $(CPP) -D__GENKSYMS__ $(c_flags) $< | $(genksyms)
117
118# LLVM assembly
119# Generate .ll files from .c
120quiet_cmd_cc_ll_c = CC $(quiet_modtag) $@
121 cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -fno-discard-value-names -o $@ $<
122
123$(obj)/%.ll: $(obj)/%.c FORCE
124 $(call if_changed_dep,cc_ll_c)
125
126# C (.c) files
127# The C file is compiled and updated dependency information is generated.
128# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
129
130is-single-obj-m = $(and $(part-of-module),$(filter $@, $(obj-m)),y)
131
132ifdef CONFIG_MODVERSIONS
133# When module versioning is enabled the following steps are executed:
134# o compile a <file>.o from <file>.c
135# o if <file>.o doesn't contain a __export_symbol_*, i.e. does
136# not export symbols, it's done.
137# o otherwise, we calculate symbol versions using the good old
138# genksyms on the preprocessed source and dump them into the .cmd file.
139# o modpost will extract versions from that file and create *.c files that will
140# be compiled and linked to the kernel and/or modules.
141
142gen_symversions = \
143 if $(NM) $@ 2>/dev/null | grep -q ' __export_symbol_'; then \
144 $(cmd_gensymtypes_$1) >> $(dot-target).cmd; \
145 fi
146
147cmd_gen_symversions_c = $(call gen_symversions,c)
148
149endif
150
151ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
152# compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
153ifdef BUILD_C_RECORDMCOUNT
154ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
155 RECORDMCOUNT_FLAGS = -w
156endif
157# Due to recursion, we must skip empty.o.
158# The empty.o file is created in the make process in order to determine
159# the target endianness and word size. It is made before all other C
160# files, including recordmcount.
161sub_cmd_record_mcount = \
162 if [ $(@) != "scripts/mod/empty.o" ]; then \
163 $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
164 fi;
165recordmcount_source := $(srctree)/scripts/recordmcount.c \
166 $(srctree)/scripts/recordmcount.h
167else
168sub_cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
169 "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
170 "$(if $(CONFIG_64BIT),64,32)" \
171 "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)" \
172 "$(LD) $(KBUILD_LDFLAGS)" "$(NM)" "$(RM)" "$(MV)" \
173 "$(if $(part-of-module),1,0)" "$(@)";
174recordmcount_source := $(srctree)/scripts/recordmcount.pl
175endif # BUILD_C_RECORDMCOUNT
176cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)), \
177 $(sub_cmd_record_mcount))
178endif # CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
179
180# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
181# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
182# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
183
184is-standard-object = $(if $(filter-out y%, $(OBJECT_FILES_NON_STANDARD_$(target-stem).o)$(OBJECT_FILES_NON_STANDARD)n),$(is-kernel-object))
185
186ifdef CONFIG_OBJTOOL
187$(obj)/%.o: private objtool-enabled = $(if $(is-standard-object),$(if $(delay-objtool),$(is-single-obj-m),y))
188endif
189
190ifneq ($(findstring 1, $(KBUILD_EXTRA_WARN)),)
191cmd_warn_shared_object = $(if $(word 2, $(modname-multi)),$(warning $(kbuild-file): $*.o is added to multiple modules: $(modname-multi)))
192endif
193
194# Built-in and composite module parts
195$(obj)/%.o: $(obj)/%.c $(recordmcount_source) FORCE
196 $(call if_changed_rule,cc_o_c)
197 $(call cmd,force_checksrc)
198
199# To make this rule robust against "Argument list too long" error,
200# ensure to add $(obj)/ prefix by a shell command.
201cmd_mod = printf '%s\n' $(call real-search, $*.o, .o, -objs -y -m) | \
202 $(AWK) '!x[$$0]++ { print("$(obj)/"$$0) }' > $@
203
204$(obj)/%.mod: FORCE
205 $(call if_changed,mod)
206
207quiet_cmd_cc_lst_c = MKLST $@
208 cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
209 $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
210 System.map $(OBJDUMP) > $@
211
212$(obj)/%.lst: $(obj)/%.c FORCE
213 $(call if_changed_dep,cc_lst_c)
214
215# Compile Rust sources (.rs)
216# ---------------------------------------------------------------------------
217
218rust_allowed_features := asm_const,asm_goto,arbitrary_self_types,lint_reasons
219
220# `--out-dir` is required to avoid temporaries being created by `rustc` in the
221# current working directory, which may be not accessible in the out-of-tree
222# modules case.
223rust_common_cmd = \
224 OBJTREE=$(abspath $(objtree)) \
225 RUST_MODFILE=$(modfile) $(RUSTC_OR_CLIPPY) $(rust_flags) \
226 -Zallow-features=$(rust_allowed_features) \
227 -Zcrate-attr=no_std \
228 -Zcrate-attr='feature($(rust_allowed_features))' \
229 -Zunstable-options --extern kernel \
230 --crate-type rlib -L $(objtree)/rust/ \
231 --crate-name $(basename $(notdir $@)) \
232 --sysroot=/dev/null \
233 --out-dir $(dir $@) --emit=dep-info=$(depfile)
234
235# `--emit=obj`, `--emit=asm` and `--emit=llvm-ir` imply a single codegen unit
236# will be used. We explicitly request `-Ccodegen-units=1` in any case, and
237# the compiler shows a warning if it is not 1. However, if we ever stop
238# requesting it explicitly and we start using some other `--emit` that does not
239# imply it (and for which codegen is performed), then we would be out of sync,
240# i.e. the outputs we would get for the different single targets (e.g. `.ll`)
241# would not match each other.
242
243quiet_cmd_rustc_o_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
244 cmd_rustc_o_rs = $(rust_common_cmd) --emit=obj=$@ $< $(cmd_objtool)
245
246define rule_rustc_o_rs
247 $(call cmd_and_fixdep,rustc_o_rs)
248 $(call cmd,gen_objtooldep)
249endef
250
251$(obj)/%.o: $(obj)/%.rs FORCE
252 +$(call if_changed_rule,rustc_o_rs)
253
254quiet_cmd_rustc_rsi_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
255 cmd_rustc_rsi_rs = \
256 $(rust_common_cmd) -Zunpretty=expanded $< >$@; \
257 command -v $(RUSTFMT) >/dev/null && $(RUSTFMT) $@
258
259$(obj)/%.rsi: $(obj)/%.rs FORCE
260 +$(call if_changed_dep,rustc_rsi_rs)
261
262quiet_cmd_rustc_s_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
263 cmd_rustc_s_rs = $(rust_common_cmd) --emit=asm=$@ $<
264
265$(obj)/%.s: $(obj)/%.rs FORCE
266 +$(call if_changed_dep,rustc_s_rs)
267
268quiet_cmd_rustc_ll_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
269 cmd_rustc_ll_rs = $(rust_common_cmd) --emit=llvm-ir=$@ $<
270
271$(obj)/%.ll: $(obj)/%.rs FORCE
272 +$(call if_changed_dep,rustc_ll_rs)
273
274quiet_cmd_rustc_rs_rs_S = RSCPP $(quiet_modtag) $@
275 cmd_rustc_rs_rs_S = $(CPP) $(c_flags) -xc -C -P $< | sed '1,/^\/\/ Cut here.$$/d' >$@
276
277$(obj)/%.rs: $(obj)/%.rs.S FORCE
278 +$(call if_changed_dep,rustc_rs_rs_S)
279
280# Compile assembler sources (.S)
281# ---------------------------------------------------------------------------
282
283# .S file exports must have their C prototypes defined in asm/asm-prototypes.h
284# or a file that it includes, in order to get versioned symbols. We build a
285# dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
286# the .S file (with trailing ';'), and run genksyms on that, to extract vers.
287#
288# This is convoluted. The .S file must first be preprocessed to run guards and
289# expand names, then the resulting exports must be constructed into plain
290# EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed
291# to make the genksyms input.
292#
293# These mirror gensymtypes_c and co above, keep them in synch.
294cmd_gensymtypes_S = \
295 { echo "\#include <linux/kernel.h>" ; \
296 echo "\#include <asm/asm-prototypes.h>" ; \
297 $(NM) $@ | sed -n 's/.* __export_symbol_\(.*\)/EXPORT_SYMBOL(\1);/p' ; } | \
298 $(CPP) -D__GENKSYMS__ $(c_flags) -xc - | $(genksyms)
299
300quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
301cmd_cpp_s_S = $(CPP) $(a_flags) -o $@ $<
302
303$(obj)/%.s: $(obj)/%.S FORCE
304 $(call if_changed_dep,cpp_s_S)
305
306ifdef CONFIG_ASM_MODVERSIONS
307
308# versioning matches the C process described above, with difference that
309# we parse asm-prototypes.h C header to get function definitions.
310
311cmd_gen_symversions_S = $(call gen_symversions,S)
312
313endif
314
315$(obj)/%.o: $(obj)/%.S FORCE
316 $(call if_changed_rule,as_o_S)
317
318targets += $(filter-out $(subdir-builtin), $(real-obj-y))
319targets += $(filter-out $(subdir-modorder), $(real-obj-m))
320targets += $(lib-y) $(always-y)
321
322# Linker scripts preprocessor (.lds.S -> .lds)
323# ---------------------------------------------------------------------------
324quiet_cmd_cpp_lds_S = LDS $@
325 cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
326 -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
327
328$(obj)/%.lds: $(src)/%.lds.S FORCE
329 $(call if_changed_dep,cpp_lds_S)
330
331# ASN.1 grammar
332# ---------------------------------------------------------------------------
333quiet_cmd_asn1_compiler = ASN.1 $(basename $@).[ch]
334 cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
335 $(basename $@).c $(basename $@).h
336
337$(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
338 $(call cmd,asn1_compiler)
339
340# Build the compiled-in targets
341# ---------------------------------------------------------------------------
342
343# To build objects in subdirs, we need to descend into the directories
344$(subdir-builtin): $(obj)/%/built-in.a: $(obj)/% ;
345$(subdir-modorder): $(obj)/%/modules.order: $(obj)/% ;
346
347#
348# Rule to compile a set of .o files into one .a file (without symbol table)
349#
350# To make this rule robust against "Argument list too long" error,
351# remove $(obj)/ prefix, and restore it by a shell command.
352
353quiet_cmd_ar_builtin = AR $@
354 cmd_ar_builtin = rm -f $@; \
355 $(if $(real-prereqs), printf "$(obj)/%s " $(patsubst $(obj)/%,%,$(real-prereqs)) | xargs) \
356 $(AR) cDPrST $@
357
358$(obj)/built-in.a: $(real-obj-y) FORCE
359 $(call if_changed,ar_builtin)
360
361# This is a list of build artifacts from the current Makefile and its
362# sub-directories. The timestamp should be updated when any of the member files.
363
364cmd_gen_order = { $(foreach m, $(real-prereqs), \
365 $(if $(filter %/$(notdir $@), $m), cat $m, echo $m);) :; } \
366 > $@
367
368$(obj)/modules.order: $(obj-m) FORCE
369 $(call if_changed,gen_order)
370
371#
372# Rule to compile a set of .o files into one .a file (with symbol table)
373#
374
375$(obj)/lib.a: $(lib-y) FORCE
376 $(call if_changed,ar)
377
378quiet_cmd_ld_multi_m = LD [M] $@
379 cmd_ld_multi_m = $(LD) $(ld_flags) -r -o $@ @$< $(cmd_objtool)
380
381define rule_ld_multi_m
382 $(call cmd_and_savecmd,ld_multi_m)
383 $(call cmd,gen_objtooldep)
384endef
385
386$(multi-obj-m): private objtool-enabled := $(delay-objtool)
387$(multi-obj-m): private part-of-module := y
388$(multi-obj-m): %.o: %.mod FORCE
389 $(call if_changed_rule,ld_multi_m)
390$(call multi_depend, $(multi-obj-m), .o, -objs -y -m)
391
392# Add intermediate targets:
393# When building objects with specific suffix patterns, add intermediate
394# targets that the final targets are derived from.
395intermediate_targets = $(foreach sfx, $(2), \
396 $(patsubst %$(strip $(1)),%$(sfx), \
397 $(filter %$(strip $(1)), $(targets))))
398# %.asn1.o <- %.asn1.[ch] <- %.asn1
399targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h)
400
401# Include additional build rules when necessary
402# ---------------------------------------------------------------------------
403
404# $(sort ...) is used here to remove duplicated words and excessive spaces.
405hostprogs := $(sort $(hostprogs))
406ifneq ($(hostprogs),)
407include $(srctree)/scripts/Makefile.host
408endif
409
410# $(sort ...) is used here to remove duplicated words and excessive spaces.
411userprogs := $(sort $(userprogs))
412ifneq ($(userprogs),)
413include $(srctree)/scripts/Makefile.userprogs
414endif
415
416ifneq ($(need-dtbslist)$(dtb-y)$(dtb-)$(filter %.dtb %.dtb.o %.dtbo.o,$(targets)),)
417include $(srctree)/scripts/Makefile.dtbs
418endif
419
420# Build
421# ---------------------------------------------------------------------------
422
423$(obj)/: $(if $(KBUILD_BUILTIN), $(targets-for-builtin)) \
424 $(if $(KBUILD_MODULES), $(targets-for-modules)) \
425 $(subdir-ym) $(always-y)
426 @:
427
428# Single targets
429# ---------------------------------------------------------------------------
430
431single-subdirs := $(foreach d, $(subdir-ym), $(if $(filter $d/%, $(MAKECMDGOALS)), $d))
432single-subdir-goals := $(filter $(addsuffix /%, $(single-subdirs)), $(MAKECMDGOALS))
433
434$(single-subdir-goals): $(single-subdirs)
435 @:
436
437# Descending
438# ---------------------------------------------------------------------------
439
440PHONY += $(subdir-ym)
441$(subdir-ym):
442 $(Q)$(MAKE) $(build)=$@ \
443 need-builtin=$(if $(filter $@/built-in.a, $(subdir-builtin)),1) \
444 need-modorder=$(if $(filter $@/modules.order, $(subdir-modorder)),1) \
445 $(filter $@/%, $(single-subdir-goals))
446
447# Add FORCE to the prerequisites of a target to force it to be always rebuilt.
448# ---------------------------------------------------------------------------
449
450PHONY += FORCE
451
452FORCE:
453
454targets += $(filter-out $(single-subdir-goals), $(MAKECMDGOALS))
455targets := $(filter-out $(PHONY), $(targets))
456
457# Read all saved command lines and dependencies for the $(targets) we
458# may be building above, using $(if_changed{,_dep}). As an
459# optimization, we don't need to read them if the target does not
460# exist, we will rebuild anyway in that case.
461
462existing-targets := $(wildcard $(sort $(targets)))
463
464-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
465
466# Create directories for object files if they do not exist
467obj-dirs := $(sort $(patsubst %/,%, $(dir $(targets))))
468# If targets exist, their directories apparently exist. Skip mkdir.
469existing-dirs := $(sort $(patsubst %/,%, $(dir $(existing-targets))))
470obj-dirs := $(strip $(filter-out $(existing-dirs), $(obj-dirs)))
471ifneq ($(obj-dirs),)
472$(shell mkdir -p $(obj-dirs))
473endif
474
475.PHONY: $(PHONY)
1# ==========================================================================
2# Building
3# ==========================================================================
4
5src := $(obj)
6
7PHONY := __build
8__build:
9
10# Init all relevant variables used in kbuild files so
11# 1) they have correct type
12# 2) they do not inherit any value from the environment
13obj-y :=
14obj-m :=
15lib-y :=
16lib-m :=
17always :=
18targets :=
19subdir-y :=
20subdir-m :=
21EXTRA_AFLAGS :=
22EXTRA_CFLAGS :=
23EXTRA_CPPFLAGS :=
24EXTRA_LDFLAGS :=
25asflags-y :=
26ccflags-y :=
27cppflags-y :=
28ldflags-y :=
29
30subdir-asflags-y :=
31subdir-ccflags-y :=
32
33# Read auto.conf if it exists, otherwise ignore
34-include include/config/auto.conf
35
36include scripts/Kbuild.include
37
38# For backward compatibility check that these variables do not change
39save-cflags := $(CFLAGS)
40
41# The filename Kbuild has precedence over Makefile
42kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
43kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
44include $(kbuild-file)
45
46# If the save-* variables changed error out
47ifeq ($(KBUILD_NOPEDANTIC),)
48 ifneq ("$(save-cflags)","$(CFLAGS)")
49 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
50 endif
51endif
52
53include scripts/Makefile.lib
54
55ifdef host-progs
56ifneq ($(hostprogs-y),$(host-progs))
57$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
58hostprogs-y += $(host-progs)
59endif
60endif
61
62# Do not include host rules unless needed
63ifneq ($(hostprogs-y)$(hostprogs-m),)
64include scripts/Makefile.host
65endif
66
67ifneq ($(KBUILD_SRC),)
68# Create output directory if not already present
69_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
70
71# Create directories for object files if directory does not exist
72# Needed when obj-y := dir/file.o syntax is used
73_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
74endif
75
76ifndef obj
77$(warning kbuild: Makefile.build is included improperly)
78endif
79
80# ===========================================================================
81
82ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
83lib-target := $(obj)/lib.a
84endif
85
86ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
87builtin-target := $(obj)/built-in.o
88endif
89
90modorder-target := $(obj)/modules.order
91
92# We keep a list of all modules in $(MODVERDIR)
93
94__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
95 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
96 $(subdir-ym) $(always)
97 @:
98
99# Linus' kernel sanity checking tool
100ifneq ($(KBUILD_CHECKSRC),0)
101 ifeq ($(KBUILD_CHECKSRC),2)
102 quiet_cmd_force_checksrc = CHECK $<
103 cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
104 else
105 quiet_cmd_checksrc = CHECK $<
106 cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
107 endif
108endif
109
110# Do section mismatch analysis for each module/built-in.o
111ifdef CONFIG_DEBUG_SECTION_MISMATCH
112 cmd_secanalysis = ; scripts/mod/modpost $@
113endif
114
115# Compile C sources (.c)
116# ---------------------------------------------------------------------------
117
118# Default is built-in, unless we know otherwise
119modkern_cflags = \
120 $(if $(part-of-module), \
121 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
122 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
123quiet_modtag := $(empty) $(empty)
124
125$(real-objs-m) : part-of-module := y
126$(real-objs-m:.o=.i) : part-of-module := y
127$(real-objs-m:.o=.s) : part-of-module := y
128$(real-objs-m:.o=.lst): part-of-module := y
129
130$(real-objs-m) : quiet_modtag := [M]
131$(real-objs-m:.o=.i) : quiet_modtag := [M]
132$(real-objs-m:.o=.s) : quiet_modtag := [M]
133$(real-objs-m:.o=.lst): quiet_modtag := [M]
134
135$(obj-m) : quiet_modtag := [M]
136
137# Default for not multi-part modules
138modname = $(basetarget)
139
140$(multi-objs-m) : modname = $(modname-multi)
141$(multi-objs-m:.o=.i) : modname = $(modname-multi)
142$(multi-objs-m:.o=.s) : modname = $(modname-multi)
143$(multi-objs-m:.o=.lst) : modname = $(modname-multi)
144$(multi-objs-y) : modname = $(modname-multi)
145$(multi-objs-y:.o=.i) : modname = $(modname-multi)
146$(multi-objs-y:.o=.s) : modname = $(modname-multi)
147$(multi-objs-y:.o=.lst) : modname = $(modname-multi)
148
149quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
150cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
151
152$(obj)/%.s: $(src)/%.c FORCE
153 $(call if_changed_dep,cc_s_c)
154
155quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
156cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $<
157
158$(obj)/%.i: $(src)/%.c FORCE
159 $(call if_changed_dep,cc_i_c)
160
161cmd_gensymtypes = \
162 $(CPP) -D__GENKSYMS__ $(c_flags) $< | \
163 $(GENKSYMS) $(if $(1), -T $(2)) \
164 $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \
165 $(if $(KBUILD_PRESERVE),-p) \
166 -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
167
168quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
169cmd_cc_symtypes_c = \
170 set -e; \
171 $(call cmd_gensymtypes,true,$@) >/dev/null; \
172 test -s $@ || rm -f $@
173
174$(obj)/%.symtypes : $(src)/%.c FORCE
175 $(call cmd,cc_symtypes_c)
176
177# C (.c) files
178# The C file is compiled and updated dependency information is generated.
179# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
180
181quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
182
183ifndef CONFIG_MODVERSIONS
184cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
185
186else
187# When module versioning is enabled the following steps are executed:
188# o compile a .tmp_<file>.o from <file>.c
189# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
190# not export symbols, we just rename .tmp_<file>.o to <file>.o and
191# are done.
192# o otherwise, we calculate symbol versions using the good old
193# genksyms on the preprocessed source and postprocess them in a way
194# that they are usable as a linker script
195# o generate <file>.o from .tmp_<file>.o using the linker to
196# replace the unresolved symbols __crc_exported_symbol with
197# the actual value of the checksum generated by genksyms
198
199cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
200cmd_modversions = \
201 if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
202 $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \
203 > $(@D)/.tmp_$(@F:.o=.ver); \
204 \
205 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
206 -T $(@D)/.tmp_$(@F:.o=.ver); \
207 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
208 else \
209 mv -f $(@D)/.tmp_$(@F) $@; \
210 fi;
211endif
212
213ifdef CONFIG_FTRACE_MCOUNT_RECORD
214ifdef BUILD_C_RECORDMCOUNT
215ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
216 RECORDMCOUNT_FLAGS = -w
217endif
218# Due to recursion, we must skip empty.o.
219# The empty.o file is created in the make process in order to determine
220# the target endianness and word size. It is made before all other C
221# files, including recordmcount.
222sub_cmd_record_mcount = \
223 if [ $(@) != "scripts/mod/empty.o" ]; then \
224 $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
225 fi;
226recordmcount_source := $(srctree)/scripts/recordmcount.c \
227 $(srctree)/scripts/recordmcount.h
228else
229sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
230 "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
231 "$(if $(CONFIG_64BIT),64,32)" \
232 "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
233 "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
234 "$(if $(part-of-module),1,0)" "$(@)";
235recordmcount_source := $(srctree)/scripts/recordmcount.pl
236endif
237cmd_record_mcount = \
238 if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \
239 "$(CC_FLAGS_FTRACE)" ]; then \
240 $(sub_cmd_record_mcount) \
241 fi;
242endif
243
244ifdef CONFIG_STACK_VALIDATION
245ifneq ($(SKIP_STACK_VALIDATION),1)
246
247__objtool_obj := $(objtree)/tools/objtool/objtool
248
249objtool_args = check
250ifndef CONFIG_FRAME_POINTER
251objtool_args += --no-fp
252endif
253
254# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
255# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
256# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
257cmd_objtool = $(if $(patsubst y%,, \
258 $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
259 $(__objtool_obj) $(objtool_args) "$(@)";)
260objtool_obj = $(if $(patsubst y%,, \
261 $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
262 $(__objtool_obj))
263
264endif # SKIP_STACK_VALIDATION
265endif # CONFIG_STACK_VALIDATION
266
267define rule_cc_o_c
268 $(call echo-cmd,checksrc) $(cmd_checksrc) \
269 $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \
270 $(cmd_modversions) \
271 $(cmd_objtool) \
272 $(call echo-cmd,record_mcount) \
273 $(cmd_record_mcount) \
274 scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
275 $(dot-target).tmp; \
276 rm -f $(depfile); \
277 mv -f $(dot-target).tmp $(dot-target).cmd
278endef
279
280define rule_as_o_S
281 $(call echo-cmd,as_o_S) $(cmd_as_o_S); \
282 $(cmd_objtool) \
283 scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,as_o_S)' > \
284 $(dot-target).tmp; \
285 rm -f $(depfile); \
286 mv -f $(dot-target).tmp $(dot-target).cmd
287endef
288
289# Built-in and composite module parts
290$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_obj) FORCE
291 $(call cmd,force_checksrc)
292 $(call if_changed_rule,cc_o_c)
293
294# Single-part modules are special since we need to mark them in $(MODVERDIR)
295
296$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_obj) FORCE
297 $(call cmd,force_checksrc)
298 $(call if_changed_rule,cc_o_c)
299 @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
300
301quiet_cmd_cc_lst_c = MKLST $@
302 cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
303 $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
304 System.map $(OBJDUMP) > $@
305
306$(obj)/%.lst: $(src)/%.c FORCE
307 $(call if_changed_dep,cc_lst_c)
308
309# Compile assembler sources (.S)
310# ---------------------------------------------------------------------------
311
312modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
313
314$(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
315$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
316
317quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
318cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
319
320$(obj)/%.s: $(src)/%.S FORCE
321 $(call if_changed_dep,as_s_S)
322
323quiet_cmd_as_o_S = AS $(quiet_modtag) $@
324cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
325
326$(obj)/%.o: $(src)/%.S $(objtool_obj) FORCE
327 $(call if_changed_rule,as_o_S)
328
329targets += $(real-objs-y) $(real-objs-m) $(lib-y)
330targets += $(extra-y) $(MAKECMDGOALS) $(always)
331
332# Linker scripts preprocessor (.lds.S -> .lds)
333# ---------------------------------------------------------------------------
334quiet_cmd_cpp_lds_S = LDS $@
335 cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
336 -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
337
338$(obj)/%.lds: $(src)/%.lds.S FORCE
339 $(call if_changed_dep,cpp_lds_S)
340
341# ASN.1 grammar
342# ---------------------------------------------------------------------------
343quiet_cmd_asn1_compiler = ASN.1 $@
344 cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
345 $(subst .h,.c,$@) $(subst .c,.h,$@)
346
347.PRECIOUS: $(objtree)/$(obj)/%-asn1.c $(objtree)/$(obj)/%-asn1.h
348
349$(obj)/%-asn1.c $(obj)/%-asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
350 $(call cmd,asn1_compiler)
351
352# Build the compiled-in targets
353# ---------------------------------------------------------------------------
354
355# To build objects in subdirs, we need to descend into the directories
356$(sort $(subdir-obj-y)): $(subdir-ym) ;
357
358#
359# Rule to compile a set of .o files into one .o file
360#
361ifdef builtin-target
362quiet_cmd_link_o_target = LD $@
363# If the list of objects to link is empty, just create an empty built-in.o
364cmd_link_o_target = $(if $(strip $(obj-y)),\
365 $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \
366 $(cmd_secanalysis),\
367 rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@)
368
369$(builtin-target): $(obj-y) FORCE
370 $(call if_changed,link_o_target)
371
372targets += $(builtin-target)
373endif # builtin-target
374
375#
376# Rule to create modules.order file
377#
378# Create commands to either record .ko file or cat modules.order from
379# a subdirectory
380modorder-cmds = \
381 $(foreach m, $(modorder), \
382 $(if $(filter %/modules.order, $m), \
383 cat $m;, echo kernel/$m;))
384
385$(modorder-target): $(subdir-ym) FORCE
386 $(Q)(cat /dev/null; $(modorder-cmds)) > $@
387
388#
389# Rule to compile a set of .o files into one .a file
390#
391ifdef lib-target
392quiet_cmd_link_l_target = AR $@
393cmd_link_l_target = rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@ $(lib-y)
394
395$(lib-target): $(lib-y) FORCE
396 $(call if_changed,link_l_target)
397
398targets += $(lib-target)
399endif
400
401#
402# Rule to link composite objects
403#
404# Composite objects are specified in kbuild makefile as follows:
405# <composite-object>-objs := <list of .o files>
406# or
407# <composite-object>-y := <list of .o files>
408# or
409# <composite-object>-m := <list of .o files>
410# The -m syntax only works if <composite object> is a module
411link_multi_deps = \
412$(filter $(addprefix $(obj)/, \
413$($(subst $(obj)/,,$(@:.o=-objs))) \
414$($(subst $(obj)/,,$(@:.o=-y))) \
415$($(subst $(obj)/,,$(@:.o=-m)))), $^)
416
417quiet_cmd_link_multi-y = LD $@
418cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
419
420quiet_cmd_link_multi-m = LD [M] $@
421cmd_link_multi-m = $(cmd_link_multi-y)
422
423$(multi-used-y): FORCE
424 $(call if_changed,link_multi-y)
425$(call multi_depend, $(multi-used-y), .o, -objs -y)
426
427$(multi-used-m): FORCE
428 $(call if_changed,link_multi-m)
429 @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
430$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
431
432targets += $(multi-used-y) $(multi-used-m)
433
434
435# Descending
436# ---------------------------------------------------------------------------
437
438PHONY += $(subdir-ym)
439$(subdir-ym):
440 $(Q)$(MAKE) $(build)=$@
441
442# Add FORCE to the prequisites of a target to force it to be always rebuilt.
443# ---------------------------------------------------------------------------
444
445PHONY += FORCE
446
447FORCE:
448
449# Read all saved command lines and dependencies for the $(targets) we
450# may be building above, using $(if_changed{,_dep}). As an
451# optimization, we don't need to read them if the target does not
452# exist, we will rebuild anyway in that case.
453
454targets := $(wildcard $(sort $(targets)))
455cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
456
457ifneq ($(cmd_files),)
458 include $(cmd_files)
459endif
460
461# Declare the contents of the .PHONY variable as phony. We keep that
462# information in a variable se we can use it in if_changed and friends.
463
464.PHONY: $(PHONY)