Linux Audio

Check our new training course

Loading...
v6.13.7
   1/* ----------------------------------------------------------------------------
   2Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN.
   3  nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao
   4
   5  The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media
   6  Access Controller for Ethernet (MACE).  It is essentially the Am2150
   7  PCMCIA Ethernet card contained in the Am2150 Demo Kit.
   8
   9Written by Roger C. Pao <rpao@paonet.org>
  10  Copyright 1995 Roger C. Pao
  11  Linux 2.5 cleanups Copyright Red Hat 2003
  12
  13  This software may be used and distributed according to the terms of
  14  the GNU General Public License.
  15
  16Ported to Linux 1.3.* network driver environment by
  17  Matti Aarnio <mea@utu.fi>
  18
  19References
  20
  21  Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993
  22  Am79C940 (MACE) Data Sheet, 1994
  23  Am79C90 (C-LANCE) Data Sheet, 1994
  24  Linux PCMCIA Programmer's Guide v1.17
  25  /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8
  26
  27  Eric Mears, New Media Corporation
  28  Tom Pollard, New Media Corporation
  29  Dean Siasoyco, New Media Corporation
  30  Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com>
  31  Donald Becker <becker@scyld.com>
  32  David Hinds <dahinds@users.sourceforge.net>
  33
  34  The Linux client driver is based on the 3c589_cs.c client driver by
  35  David Hinds.
  36
  37  The Linux network driver outline is based on the 3c589_cs.c driver,
  38  the 8390.c driver, and the example skeleton.c kernel code, which are
  39  by Donald Becker.
  40
  41  The Am2150 network driver hardware interface code is based on the
  42  OS/9000 driver for the New Media Ethernet LAN by Eric Mears.
  43
  44  Special thanks for testing and help in debugging this driver goes
  45  to Ken Lesniak.
  46
  47-------------------------------------------------------------------------------
  48Driver Notes and Issues
  49-------------------------------------------------------------------------------
  50
  511. Developed on a Dell 320SLi
  52   PCMCIA Card Services 2.6.2
  53   Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386
  54
  552. rc.pcmcia may require loading pcmcia_core with io_speed=300:
  56   'insmod pcmcia_core.o io_speed=300'.
  57   This will avoid problems with fast systems which causes rx_framecnt
  58   to return random values.
  59
  603. If hot extraction does not work for you, use 'ifconfig eth0 down'
  61   before extraction.
  62
  634. There is a bad slow-down problem in this driver.
  64
  655. Future: Multicast processing.  In the meantime, do _not_ compile your
  66   kernel with multicast ip enabled.
  67
  68-------------------------------------------------------------------------------
  69History
  70-------------------------------------------------------------------------------
  71Log: nmclan_cs.c,v
  72 * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk>
  73 * Fixed hang on card eject as we probe it
  74 * Cleaned up to use new style locking.
  75 *
  76 * Revision 0.16  1995/07/01  06:42:17  rpao
  77 * Bug fix: nmclan_reset() called CardServices incorrectly.
  78 *
  79 * Revision 0.15  1995/05/24  08:09:47  rpao
  80 * Re-implement MULTI_TX dev->tbusy handling.
  81 *
  82 * Revision 0.14  1995/05/23  03:19:30  rpao
  83 * Added, in nmclan_config(), "tuple.Attributes = 0;".
  84 * Modified MACE ID check to ignore chip revision level.
  85 * Avoid tx_free_frames race condition between _start_xmit and _interrupt.
  86 *
  87 * Revision 0.13  1995/05/18  05:56:34  rpao
  88 * Statistics changes.
  89 * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list.
  90 * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT.  Fixes driver lockup.
  91 *
  92 * Revision 0.12  1995/05/14  00:12:23  rpao
  93 * Statistics overhaul.
  94 *
  95
  9695/05/13 rpao	V0.10a
  97		Bug fix: MACE statistics counters used wrong I/O ports.
  98		Bug fix: mace_interrupt() needed to allow statistics to be
  99		processed without RX or TX interrupts pending.
 10095/05/11 rpao	V0.10
 101		Multiple transmit request processing.
 102		Modified statistics to use MACE counters where possible.
 10395/05/10 rpao	V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO.
 104		*Released
 10595/05/10 rpao	V0.08
 106		Bug fix: Make all non-exported functions private by using
 107		static keyword.
 108		Bug fix: Test IntrCnt _before_ reading MACE_IR.
 10995/05/10 rpao	V0.07 Statistics.
 11095/05/09 rpao	V0.06 Fix rx_framecnt problem by addition of PCIC wait states.
 111
 112---------------------------------------------------------------------------- */
 113
 114#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 115
 116#define DRV_NAME	"nmclan_cs"
 
 
 117
 118/* ----------------------------------------------------------------------------
 119Conditional Compilation Options
 120---------------------------------------------------------------------------- */
 121
 122#define MULTI_TX			0
 123#define RESET_ON_TIMEOUT		1
 124#define TX_INTERRUPTABLE		1
 125#define RESET_XILINX			0
 126
 127/* ----------------------------------------------------------------------------
 128Include Files
 129---------------------------------------------------------------------------- */
 130
 131#include <linux/module.h>
 132#include <linux/kernel.h>
 133#include <linux/ptrace.h>
 134#include <linux/slab.h>
 135#include <linux/string.h>
 136#include <linux/timer.h>
 137#include <linux/interrupt.h>
 138#include <linux/in.h>
 139#include <linux/delay.h>
 140#include <linux/ethtool.h>
 141#include <linux/netdevice.h>
 142#include <linux/etherdevice.h>
 143#include <linux/skbuff.h>
 144#include <linux/if_arp.h>
 145#include <linux/ioport.h>
 146#include <linux/bitops.h>
 147
 148#include <pcmcia/cisreg.h>
 149#include <pcmcia/cistpl.h>
 150#include <pcmcia/ds.h>
 151
 152#include <linux/uaccess.h>
 153#include <asm/io.h>
 154
 155/* ----------------------------------------------------------------------------
 156Defines
 157---------------------------------------------------------------------------- */
 158
 159#define MACE_LADRF_LEN			8
 160					/* 8 bytes in Logical Address Filter */
 161
 162/* Loop Control Defines */
 163#define MACE_MAX_IR_ITERATIONS		10
 164#define MACE_MAX_RX_ITERATIONS		12
 165	/*
 166	TBD: Dean brought this up, and I assumed the hardware would
 167	handle it:
 168
 169	If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be
 170	non-zero when the isr exits.  We may not get another interrupt
 171	to process the remaining packets for some time.
 172	*/
 173
 174/*
 175The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA)
 176which manages the interface between the MACE and the PCMCIA bus.  It
 177also includes buffer management for the 32K x 8 SRAM to control up to
 178four transmit and 12 receive frames at a time.
 179*/
 180#define AM2150_MAX_TX_FRAMES		4
 181#define AM2150_MAX_RX_FRAMES		12
 182
 183/* Am2150 Ethernet Card I/O Mapping */
 184#define AM2150_RCV			0x00
 185#define AM2150_XMT			0x04
 186#define AM2150_XMT_SKIP			0x09
 187#define AM2150_RCV_NEXT			0x0A
 188#define AM2150_RCV_FRAME_COUNT		0x0B
 189#define AM2150_MACE_BANK		0x0C
 190#define AM2150_MACE_BASE		0x10
 191
 192/* MACE Registers */
 193#define MACE_RCVFIFO			0
 194#define MACE_XMTFIFO			1
 195#define MACE_XMTFC			2
 196#define MACE_XMTFS			3
 197#define MACE_XMTRC			4
 198#define MACE_RCVFC			5
 199#define MACE_RCVFS			6
 200#define MACE_FIFOFC			7
 201#define MACE_IR				8
 202#define MACE_IMR			9
 203#define MACE_PR				10
 204#define MACE_BIUCC			11
 205#define MACE_FIFOCC			12
 206#define MACE_MACCC			13
 207#define MACE_PLSCC			14
 208#define MACE_PHYCC			15
 209#define MACE_CHIPIDL			16
 210#define MACE_CHIPIDH			17
 211#define MACE_IAC			18
 212/* Reserved */
 213#define MACE_LADRF			20
 214#define MACE_PADR			21
 215/* Reserved */
 216/* Reserved */
 217#define MACE_MPC			24
 218/* Reserved */
 219#define MACE_RNTPC			26
 220#define MACE_RCVCC			27
 221/* Reserved */
 222#define MACE_UTR			29
 223#define MACE_RTR1			30
 224#define MACE_RTR2			31
 225
 226/* MACE Bit Masks */
 227#define MACE_XMTRC_EXDEF		0x80
 228#define MACE_XMTRC_XMTRC		0x0F
 229
 230#define MACE_XMTFS_XMTSV		0x80
 231#define MACE_XMTFS_UFLO			0x40
 232#define MACE_XMTFS_LCOL			0x20
 233#define MACE_XMTFS_MORE			0x10
 234#define MACE_XMTFS_ONE			0x08
 235#define MACE_XMTFS_DEFER		0x04
 236#define MACE_XMTFS_LCAR			0x02
 237#define MACE_XMTFS_RTRY			0x01
 238
 239#define MACE_RCVFS_RCVSTS		0xF000
 240#define MACE_RCVFS_OFLO			0x8000
 241#define MACE_RCVFS_CLSN			0x4000
 242#define MACE_RCVFS_FRAM			0x2000
 243#define MACE_RCVFS_FCS			0x1000
 244
 245#define MACE_FIFOFC_RCVFC		0xF0
 246#define MACE_FIFOFC_XMTFC		0x0F
 247
 248#define MACE_IR_JAB			0x80
 249#define MACE_IR_BABL			0x40
 250#define MACE_IR_CERR			0x20
 251#define MACE_IR_RCVCCO			0x10
 252#define MACE_IR_RNTPCO			0x08
 253#define MACE_IR_MPCO			0x04
 254#define MACE_IR_RCVINT			0x02
 255#define MACE_IR_XMTINT			0x01
 256
 257#define MACE_MACCC_PROM			0x80
 258#define MACE_MACCC_DXMT2PD		0x40
 259#define MACE_MACCC_EMBA			0x20
 260#define MACE_MACCC_RESERVED		0x10
 261#define MACE_MACCC_DRCVPA		0x08
 262#define MACE_MACCC_DRCVBC		0x04
 263#define MACE_MACCC_ENXMT		0x02
 264#define MACE_MACCC_ENRCV		0x01
 265
 266#define MACE_PHYCC_LNKFL		0x80
 267#define MACE_PHYCC_DLNKTST		0x40
 268#define MACE_PHYCC_REVPOL		0x20
 269#define MACE_PHYCC_DAPC			0x10
 270#define MACE_PHYCC_LRT			0x08
 271#define MACE_PHYCC_ASEL			0x04
 272#define MACE_PHYCC_RWAKE		0x02
 273#define MACE_PHYCC_AWAKE		0x01
 274
 275#define MACE_IAC_ADDRCHG		0x80
 276#define MACE_IAC_PHYADDR		0x04
 277#define MACE_IAC_LOGADDR		0x02
 278
 279#define MACE_UTR_RTRE			0x80
 280#define MACE_UTR_RTRD			0x40
 281#define MACE_UTR_RPA			0x20
 282#define MACE_UTR_FCOLL			0x10
 283#define MACE_UTR_RCVFCSE		0x08
 284#define MACE_UTR_LOOP_INCL_MENDEC	0x06
 285#define MACE_UTR_LOOP_NO_MENDEC		0x04
 286#define MACE_UTR_LOOP_EXTERNAL		0x02
 287#define MACE_UTR_LOOP_NONE		0x00
 288#define MACE_UTR_RESERVED		0x01
 289
 290/* Switch MACE register bank (only 0 and 1 are valid) */
 291#define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK)
 292
 293#define MACE_IMR_DEFAULT \
 294  (0xFF - \
 295    ( \
 296      MACE_IR_CERR | \
 297      MACE_IR_RCVCCO | \
 298      MACE_IR_RNTPCO | \
 299      MACE_IR_MPCO | \
 300      MACE_IR_RCVINT | \
 301      MACE_IR_XMTINT \
 302    ) \
 303  )
 304#undef MACE_IMR_DEFAULT
 305#define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */
 306
 307#define TX_TIMEOUT		((400*HZ)/1000)
 308
 309/* ----------------------------------------------------------------------------
 310Type Definitions
 311---------------------------------------------------------------------------- */
 312
 313typedef struct _mace_statistics {
 314    /* MACE_XMTFS */
 315    int xmtsv;
 316    int uflo;
 317    int lcol;
 318    int more;
 319    int one;
 320    int defer;
 321    int lcar;
 322    int rtry;
 323
 324    /* MACE_XMTRC */
 325    int exdef;
 326    int xmtrc;
 327
 328    /* RFS1--Receive Status (RCVSTS) */
 329    int oflo;
 330    int clsn;
 331    int fram;
 332    int fcs;
 333
 334    /* RFS2--Runt Packet Count (RNTPC) */
 335    int rfs_rntpc;
 336
 337    /* RFS3--Receive Collision Count (RCVCC) */
 338    int rfs_rcvcc;
 339
 340    /* MACE_IR */
 341    int jab;
 342    int babl;
 343    int cerr;
 344    int rcvcco;
 345    int rntpco;
 346    int mpco;
 347
 348    /* MACE_MPC */
 349    int mpc;
 350
 351    /* MACE_RNTPC */
 352    int rntpc;
 353
 354    /* MACE_RCVCC */
 355    int rcvcc;
 356} mace_statistics;
 357
 358typedef struct _mace_private {
 359	struct pcmcia_device	*p_dev;
 
 360    mace_statistics mace_stats; /* MACE chip statistics counters */
 361
 362    /* restore_multicast_list() state variables */
 363    int multicast_ladrf[MACE_LADRF_LEN]; /* Logical address filter */
 364    int multicast_num_addrs;
 365
 366    char tx_free_frames; /* Number of free transmit frame buffers */
 367    char tx_irq_disabled; /* MACE TX interrupt disabled */
 368
 369    spinlock_t bank_lock; /* Must be held if you step off bank 0 */
 370} mace_private;
 371
 372/* ----------------------------------------------------------------------------
 373Private Global Variables
 374---------------------------------------------------------------------------- */
 375
 376static const char *if_names[]={
 377    "Auto", "10baseT", "BNC",
 378};
 379
 380/* ----------------------------------------------------------------------------
 381Parameters
 382	These are the parameters that can be set during loading with
 383	'insmod'.
 384---------------------------------------------------------------------------- */
 385
 386MODULE_DESCRIPTION("New Media PCMCIA ethernet driver");
 387MODULE_LICENSE("GPL");
 388
 389#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 390
 391/* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
 392INT_MODULE_PARM(if_port, 0);
 393
 394
 395/* ----------------------------------------------------------------------------
 396Function Prototypes
 397---------------------------------------------------------------------------- */
 398
 399static int nmclan_config(struct pcmcia_device *link);
 400static void nmclan_release(struct pcmcia_device *link);
 401
 402static void nmclan_reset(struct net_device *dev);
 403static int mace_config(struct net_device *dev, struct ifmap *map);
 404static int mace_open(struct net_device *dev);
 405static int mace_close(struct net_device *dev);
 406static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
 407					 struct net_device *dev);
 408static void mace_tx_timeout(struct net_device *dev, unsigned int txqueue);
 409static irqreturn_t mace_interrupt(int irq, void *dev_id);
 410static struct net_device_stats *mace_get_stats(struct net_device *dev);
 411static int mace_rx(struct net_device *dev, unsigned char RxCnt);
 412static void restore_multicast_list(struct net_device *dev);
 413static void set_multicast_list(struct net_device *dev);
 414static const struct ethtool_ops netdev_ethtool_ops;
 415
 416
 417static void nmclan_detach(struct pcmcia_device *p_dev);
 418
 419static const struct net_device_ops mace_netdev_ops = {
 420	.ndo_open		= mace_open,
 421	.ndo_stop		= mace_close,
 422	.ndo_start_xmit		= mace_start_xmit,
 423	.ndo_tx_timeout		= mace_tx_timeout,
 424	.ndo_set_config		= mace_config,
 425	.ndo_get_stats		= mace_get_stats,
 426	.ndo_set_rx_mode	= set_multicast_list,
 
 427	.ndo_set_mac_address 	= eth_mac_addr,
 428	.ndo_validate_addr	= eth_validate_addr,
 429};
 430
 431static int nmclan_probe(struct pcmcia_device *link)
 432{
 433    mace_private *lp;
 434    struct net_device *dev;
 435
 436    dev_dbg(&link->dev, "nmclan_attach()\n");
 437
 438    /* Create new ethernet device */
 439    dev = alloc_etherdev(sizeof(mace_private));
 440    if (!dev)
 441	    return -ENOMEM;
 442    lp = netdev_priv(dev);
 443    lp->p_dev = link;
 444    link->priv = dev;
 445
 446    spin_lock_init(&lp->bank_lock);
 447    link->resource[0]->end = 32;
 448    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 449    link->config_flags |= CONF_ENABLE_IRQ;
 450    link->config_index = 1;
 451    link->config_regs = PRESENT_OPTION;
 452
 453    lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 454
 455    dev->netdev_ops = &mace_netdev_ops;
 456    dev->ethtool_ops = &netdev_ethtool_ops;
 457    dev->watchdog_timeo = TX_TIMEOUT;
 458
 459    return nmclan_config(link);
 460} /* nmclan_attach */
 461
 462static void nmclan_detach(struct pcmcia_device *link)
 463{
 464    struct net_device *dev = link->priv;
 465
 466    dev_dbg(&link->dev, "nmclan_detach\n");
 467
 468    unregister_netdev(dev);
 469
 470    nmclan_release(link);
 471
 472    free_netdev(dev);
 473} /* nmclan_detach */
 474
 475/* ----------------------------------------------------------------------------
 476mace_read
 477	Reads a MACE register.  This is bank independent; however, the
 478	caller must ensure that this call is not interruptable.  We are
 479	assuming that during normal operation, the MACE is always in
 480	bank 0.
 481---------------------------------------------------------------------------- */
 482static int mace_read(mace_private *lp, unsigned int ioaddr, int reg)
 483{
 484  int data = 0xFF;
 485  unsigned long flags;
 486
 487  switch (reg >> 4) {
 488  case 0: /* register 0-15 */
 489      data = inb(ioaddr + AM2150_MACE_BASE + reg);
 490      break;
 491  case 1: /* register 16-31 */
 492      spin_lock_irqsave(&lp->bank_lock, flags);
 493      MACEBANK(1);
 494      data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
 495      MACEBANK(0);
 496      spin_unlock_irqrestore(&lp->bank_lock, flags);
 497      break;
 498  }
 499  return data & 0xFF;
 500} /* mace_read */
 501
 502/* ----------------------------------------------------------------------------
 503mace_write
 504	Writes to a MACE register.  This is bank independent; however,
 505	the caller must ensure that this call is not interruptable.  We
 506	are assuming that during normal operation, the MACE is always in
 507	bank 0.
 508---------------------------------------------------------------------------- */
 509static void mace_write(mace_private *lp, unsigned int ioaddr, int reg,
 510		       int data)
 511{
 512  unsigned long flags;
 513
 514  switch (reg >> 4) {
 515  case 0: /* register 0-15 */
 516      outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg);
 517      break;
 518  case 1: /* register 16-31 */
 519      spin_lock_irqsave(&lp->bank_lock, flags);
 520      MACEBANK(1);
 521      outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
 522      MACEBANK(0);
 523      spin_unlock_irqrestore(&lp->bank_lock, flags);
 524      break;
 525  }
 526} /* mace_write */
 527
 528/* ----------------------------------------------------------------------------
 529mace_init
 530	Resets the MACE chip.
 531---------------------------------------------------------------------------- */
 532static int mace_init(mace_private *lp, unsigned int ioaddr,
 533		     const char *enet_addr)
 534{
 535  int i;
 536  int ct = 0;
 537
 538  /* MACE Software reset */
 539  mace_write(lp, ioaddr, MACE_BIUCC, 1);
 540  while (mace_read(lp, ioaddr, MACE_BIUCC) & 0x01) {
 541    /* Wait for reset bit to be cleared automatically after <= 200ns */;
 542    if(++ct > 500)
 543    {
 544	pr_err("reset failed, card removed?\n");
 545	return -1;
 546    }
 547    udelay(1);
 548  }
 549  mace_write(lp, ioaddr, MACE_BIUCC, 0);
 550
 551  /* The Am2150 requires that the MACE FIFOs operate in burst mode. */
 552  mace_write(lp, ioaddr, MACE_FIFOCC, 0x0F);
 553
 554  mace_write(lp,ioaddr, MACE_RCVFC, 0); /* Disable Auto Strip Receive */
 555  mace_write(lp, ioaddr, MACE_IMR, 0xFF); /* Disable all interrupts until _open */
 556
 557  /*
 558   * Bit 2-1 PORTSEL[1-0] Port Select.
 559   * 00 AUI/10Base-2
 560   * 01 10Base-T
 561   * 10 DAI Port (reserved in Am2150)
 562   * 11 GPSI
 563   * For this card, only the first two are valid.
 564   * So, PLSCC should be set to
 565   * 0x00 for 10Base-2
 566   * 0x02 for 10Base-T
 567   * Or just set ASEL in PHYCC below!
 568   */
 569  switch (if_port) {
 570  case 1:
 571      mace_write(lp, ioaddr, MACE_PLSCC, 0x02);
 572      break;
 573  case 2:
 574      mace_write(lp, ioaddr, MACE_PLSCC, 0x00);
 575      break;
 576  default:
 577      mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4);
 578      /* ASEL Auto Select.  When set, the PORTSEL[1-0] bits are overridden,
 579	 and the MACE device will automatically select the operating media
 580	 interface port. */
 581      break;
 582  }
 583
 584  mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_PHYADDR);
 585  /* Poll ADDRCHG bit */
 586  ct = 0;
 587  while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
 588  {
 589	if(++ ct > 500)
 590	{
 591		pr_err("ADDRCHG timeout, card removed?\n");
 592		return -1;
 593	}
 594  }
 595  /* Set PADR register */
 596  for (i = 0; i < ETH_ALEN; i++)
 597    mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]);
 598
 599  /* MAC Configuration Control Register should be written last */
 600  /* Let set_multicast_list set this. */
 601  /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */
 602  mace_write(lp, ioaddr, MACE_MACCC, 0x00);
 603  return 0;
 604} /* mace_init */
 605
 606static int nmclan_config(struct pcmcia_device *link)
 607{
 608  struct net_device *dev = link->priv;
 609  mace_private *lp = netdev_priv(dev);
 610  u8 *buf;
 611  size_t len;
 612  int i, ret;
 613  unsigned int ioaddr;
 614
 615  dev_dbg(&link->dev, "nmclan_config\n");
 616
 617  link->io_lines = 5;
 618  ret = pcmcia_request_io(link);
 619  if (ret)
 620	  goto failed;
 621  ret = pcmcia_request_irq(link, mace_interrupt);
 622  if (ret)
 623	  goto failed;
 624  ret = pcmcia_enable_device(link);
 625  if (ret)
 626	  goto failed;
 627
 628  dev->irq = link->irq;
 629  dev->base_addr = link->resource[0]->start;
 630
 631  ioaddr = dev->base_addr;
 632
 633  /* Read the ethernet address from the CIS. */
 634  len = pcmcia_get_tuple(link, 0x80, &buf);
 635  if (!buf || len < ETH_ALEN) {
 636	  kfree(buf);
 637	  goto failed;
 638  }
 639  eth_hw_addr_set(dev, buf);
 640  kfree(buf);
 641
 642  /* Verify configuration by reading the MACE ID. */
 643  {
 644    char sig[2];
 645
 646    sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL);
 647    sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH);
 648    if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) {
 649      dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n",
 650	    sig[0], sig[1]);
 651    } else {
 652      pr_notice("mace id not found: %x %x should be 0x40 0x?9\n",
 653		sig[0], sig[1]);
 654      goto failed;
 655    }
 656  }
 657
 658  if(mace_init(lp, ioaddr, dev->dev_addr) == -1)
 659	goto failed;
 660
 661  /* The if_port symbol can be set when the module is loaded */
 662  if (if_port <= 2)
 663    dev->if_port = if_port;
 664  else
 665    pr_notice("invalid if_port requested\n");
 666
 667  SET_NETDEV_DEV(dev, &link->dev);
 668
 669  i = register_netdev(dev);
 670  if (i != 0) {
 671    pr_notice("register_netdev() failed\n");
 672    goto failed;
 673  }
 674
 675  netdev_info(dev, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n",
 676	      dev->base_addr, dev->irq, if_names[dev->if_port], dev->dev_addr);
 677  return 0;
 678
 679failed:
 680	nmclan_release(link);
 681	return -ENODEV;
 682} /* nmclan_config */
 683
 684static void nmclan_release(struct pcmcia_device *link)
 685{
 686	dev_dbg(&link->dev, "nmclan_release\n");
 687	pcmcia_disable_device(link);
 688}
 689
 690static int nmclan_suspend(struct pcmcia_device *link)
 691{
 692	struct net_device *dev = link->priv;
 693
 694	if (link->open)
 695		netif_device_detach(dev);
 696
 697	return 0;
 698}
 699
 700static int nmclan_resume(struct pcmcia_device *link)
 701{
 702	struct net_device *dev = link->priv;
 703
 704	if (link->open) {
 705		nmclan_reset(dev);
 706		netif_device_attach(dev);
 707	}
 708
 709	return 0;
 710}
 711
 712
 713/* ----------------------------------------------------------------------------
 714nmclan_reset
 715	Reset and restore all of the Xilinx and MACE registers.
 716---------------------------------------------------------------------------- */
 717static void nmclan_reset(struct net_device *dev)
 718{
 719  mace_private *lp = netdev_priv(dev);
 720
 721#if RESET_XILINX
 722  struct pcmcia_device *link = &lp->link;
 723  u8 OrigCorValue;
 724
 725  /* Save original COR value */
 726  pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
 727
 728  /* Reset Xilinx */
 729  dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
 730	OrigCorValue);
 731  pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
 732  /* Need to wait for 20 ms for PCMCIA to finish reset. */
 733
 734  /* Restore original COR configuration index */
 735  pcmcia_write_config_byte(link, CISREG_COR,
 736			  (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
 737  /* Xilinx is now completely reset along with the MACE chip. */
 738  lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 739
 740#endif /* #if RESET_XILINX */
 741
 742  /* Xilinx is now completely reset along with the MACE chip. */
 743  lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 744
 745  /* Reinitialize the MACE chip for operation. */
 746  mace_init(lp, dev->base_addr, dev->dev_addr);
 747  mace_write(lp, dev->base_addr, MACE_IMR, MACE_IMR_DEFAULT);
 748
 749  /* Restore the multicast list and enable TX and RX. */
 750  restore_multicast_list(dev);
 751} /* nmclan_reset */
 752
 753/* ----------------------------------------------------------------------------
 754mace_config
 755	[Someone tell me what this is supposed to do?  Is if_port a defined
 756	standard?  If so, there should be defines to indicate 1=10Base-T,
 757	2=10Base-2, etc. including limited automatic detection.]
 758---------------------------------------------------------------------------- */
 759static int mace_config(struct net_device *dev, struct ifmap *map)
 760{
 761  if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
 762    if (map->port <= 2) {
 763      WRITE_ONCE(dev->if_port, map->port);
 764      netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
 765    } else
 766      return -EINVAL;
 767  }
 768  return 0;
 769} /* mace_config */
 770
 771/* ----------------------------------------------------------------------------
 772mace_open
 773	Open device driver.
 774---------------------------------------------------------------------------- */
 775static int mace_open(struct net_device *dev)
 776{
 777  unsigned int ioaddr = dev->base_addr;
 778  mace_private *lp = netdev_priv(dev);
 779  struct pcmcia_device *link = lp->p_dev;
 780
 781  if (!pcmcia_dev_present(link))
 782    return -ENODEV;
 783
 784  link->open++;
 785
 786  MACEBANK(0);
 787
 788  netif_start_queue(dev);
 789  nmclan_reset(dev);
 790
 791  return 0; /* Always succeed */
 792} /* mace_open */
 793
 794/* ----------------------------------------------------------------------------
 795mace_close
 796	Closes device driver.
 797---------------------------------------------------------------------------- */
 798static int mace_close(struct net_device *dev)
 799{
 800  unsigned int ioaddr = dev->base_addr;
 801  mace_private *lp = netdev_priv(dev);
 802  struct pcmcia_device *link = lp->p_dev;
 803
 804  dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
 805
 806  /* Mask off all interrupts from the MACE chip. */
 807  outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR);
 808
 809  link->open--;
 810  netif_stop_queue(dev);
 811
 812  return 0;
 813} /* mace_close */
 814
 815static void netdev_get_drvinfo(struct net_device *dev,
 816			       struct ethtool_drvinfo *info)
 817{
 818	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
 
 819	snprintf(info->bus_info, sizeof(info->bus_info),
 820		"PCMCIA 0x%lx", dev->base_addr);
 821}
 822
 823static const struct ethtool_ops netdev_ethtool_ops = {
 824	.get_drvinfo		= netdev_get_drvinfo,
 825};
 826
 827/* ----------------------------------------------------------------------------
 828mace_start_xmit
 829	This routine begins the packet transmit function.  When completed,
 830	it will generate a transmit interrupt.
 831
 832	According to /usr/src/linux/net/inet/dev.c, if _start_xmit
 833	returns 0, the "packet is now solely the responsibility of the
 834	driver."  If _start_xmit returns non-zero, the "transmission
 835	failed, put skb back into a list."
 836---------------------------------------------------------------------------- */
 837
 838static void mace_tx_timeout(struct net_device *dev, unsigned int txqueue)
 839{
 840  mace_private *lp = netdev_priv(dev);
 841  struct pcmcia_device *link = lp->p_dev;
 842
 843  netdev_notice(dev, "transmit timed out -- ");
 844#if RESET_ON_TIMEOUT
 845  pr_cont("resetting card\n");
 846  pcmcia_reset_card(link->socket);
 847#else /* #if RESET_ON_TIMEOUT */
 848  pr_cont("NOT resetting card\n");
 849#endif /* #if RESET_ON_TIMEOUT */
 850  netif_trans_update(dev); /* prevent tx timeout */
 851  netif_wake_queue(dev);
 852}
 853
 854static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
 855					 struct net_device *dev)
 856{
 857  mace_private *lp = netdev_priv(dev);
 858  unsigned int ioaddr = dev->base_addr;
 859
 860  netif_stop_queue(dev);
 861
 862  pr_debug("%s: mace_start_xmit(length = %ld) called.\n",
 863	dev->name, (long)skb->len);
 864
 865#if (!TX_INTERRUPTABLE)
 866  /* Disable MACE TX interrupts. */
 867  outb(MACE_IMR_DEFAULT | MACE_IR_XMTINT,
 868    ioaddr + AM2150_MACE_BASE + MACE_IMR);
 869  lp->tx_irq_disabled=1;
 870#endif /* #if (!TX_INTERRUPTABLE) */
 871
 872  {
 873    /* This block must not be interrupted by another transmit request!
 874       mace_tx_timeout will take care of timer-based retransmissions from
 875       the upper layers.  The interrupt handler is guaranteed never to
 876       service a transmit interrupt while we are in here.
 877    */
 878
 879    dev->stats.tx_bytes += skb->len;
 880    lp->tx_free_frames--;
 881
 882    /* WARNING: Write the _exact_ number of bytes written in the header! */
 883    /* Put out the word header [must be an outw()] . . . */
 884    outw(skb->len, ioaddr + AM2150_XMT);
 885    /* . . . and the packet [may be any combination of outw() and outb()] */
 886    outsw(ioaddr + AM2150_XMT, skb->data, skb->len >> 1);
 887    if (skb->len & 1) {
 888      /* Odd byte transfer */
 889      outb(skb->data[skb->len-1], ioaddr + AM2150_XMT);
 890    }
 891
 892#if MULTI_TX
 893    if (lp->tx_free_frames > 0)
 894      netif_start_queue(dev);
 895#endif /* #if MULTI_TX */
 896  }
 897
 898#if (!TX_INTERRUPTABLE)
 899  /* Re-enable MACE TX interrupts. */
 900  lp->tx_irq_disabled=0;
 901  outb(MACE_IMR_DEFAULT, ioaddr + AM2150_MACE_BASE + MACE_IMR);
 902#endif /* #if (!TX_INTERRUPTABLE) */
 903
 904  dev_kfree_skb(skb);
 905
 906  return NETDEV_TX_OK;
 907} /* mace_start_xmit */
 908
 909/* ----------------------------------------------------------------------------
 910mace_interrupt
 911	The interrupt handler.
 912---------------------------------------------------------------------------- */
 913static irqreturn_t mace_interrupt(int irq, void *dev_id)
 914{
 915  struct net_device *dev = (struct net_device *) dev_id;
 916  mace_private *lp = netdev_priv(dev);
 917  unsigned int ioaddr;
 918  int status;
 919  int IntrCnt = MACE_MAX_IR_ITERATIONS;
 920
 921  if (!dev) {
 922    pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n",
 923	  irq);
 924    return IRQ_NONE;
 925  }
 926
 927  ioaddr = dev->base_addr;
 928
 929  if (lp->tx_irq_disabled) {
 930    const char *msg;
 931    if (lp->tx_irq_disabled)
 932      msg = "Interrupt with tx_irq_disabled";
 933    else
 934      msg = "Re-entering the interrupt handler";
 935    netdev_notice(dev, "%s [isr=%02X, imr=%02X]\n",
 936		  msg,
 937		  inb(ioaddr + AM2150_MACE_BASE + MACE_IR),
 938		  inb(ioaddr + AM2150_MACE_BASE + MACE_IMR));
 939    /* WARNING: MACE_IR has been read! */
 940    return IRQ_NONE;
 941  }
 942
 943  if (!netif_device_present(dev)) {
 944    netdev_dbg(dev, "interrupt from dead card\n");
 945    return IRQ_NONE;
 946  }
 947
 948  do {
 949    /* WARNING: MACE_IR is a READ/CLEAR port! */
 950    status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR);
 951    if (!(status & ~MACE_IMR_DEFAULT) && IntrCnt == MACE_MAX_IR_ITERATIONS)
 952      return IRQ_NONE;
 953
 954    pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
 955
 956    if (status & MACE_IR_RCVINT) {
 957      mace_rx(dev, MACE_MAX_RX_ITERATIONS);
 958    }
 959
 960    if (status & MACE_IR_XMTINT) {
 961      unsigned char fifofc;
 962      unsigned char xmtrc;
 963      unsigned char xmtfs;
 964
 965      fifofc = inb(ioaddr + AM2150_MACE_BASE + MACE_FIFOFC);
 966      if ((fifofc & MACE_FIFOFC_XMTFC)==0) {
 967	dev->stats.tx_errors++;
 968	outb(0xFF, ioaddr + AM2150_XMT_SKIP);
 969      }
 970
 971      /* Transmit Retry Count (XMTRC, reg 4) */
 972      xmtrc = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTRC);
 973      if (xmtrc & MACE_XMTRC_EXDEF) lp->mace_stats.exdef++;
 974      lp->mace_stats.xmtrc += (xmtrc & MACE_XMTRC_XMTRC);
 975
 976      if (
 977        (xmtfs = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTFS)) &
 978        MACE_XMTFS_XMTSV /* Transmit Status Valid */
 979      ) {
 980	lp->mace_stats.xmtsv++;
 981
 982	if (xmtfs & ~MACE_XMTFS_XMTSV) {
 983	  if (xmtfs & MACE_XMTFS_UFLO) {
 984	    /* Underflow.  Indicates that the Transmit FIFO emptied before
 985	       the end of frame was reached. */
 986	    lp->mace_stats.uflo++;
 987	  }
 988	  if (xmtfs & MACE_XMTFS_LCOL) {
 989	    /* Late Collision */
 990	    lp->mace_stats.lcol++;
 991	  }
 992	  if (xmtfs & MACE_XMTFS_MORE) {
 993	    /* MORE than one retry was needed */
 994	    lp->mace_stats.more++;
 995	  }
 996	  if (xmtfs & MACE_XMTFS_ONE) {
 997	    /* Exactly ONE retry occurred */
 998	    lp->mace_stats.one++;
 999	  }
1000	  if (xmtfs & MACE_XMTFS_DEFER) {
1001	    /* Transmission was defered */
1002	    lp->mace_stats.defer++;
1003	  }
1004	  if (xmtfs & MACE_XMTFS_LCAR) {
1005	    /* Loss of carrier */
1006	    lp->mace_stats.lcar++;
1007	  }
1008	  if (xmtfs & MACE_XMTFS_RTRY) {
1009	    /* Retry error: transmit aborted after 16 attempts */
1010	    lp->mace_stats.rtry++;
1011	  }
1012        } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */
1013
1014      } /* if (xmtfs & MACE_XMTFS_XMTSV) */
1015
1016      dev->stats.tx_packets++;
1017      lp->tx_free_frames++;
1018      netif_wake_queue(dev);
1019    } /* if (status & MACE_IR_XMTINT) */
1020
1021    if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) {
1022      if (status & MACE_IR_JAB) {
1023        /* Jabber Error.  Excessive transmit duration (20-150ms). */
1024        lp->mace_stats.jab++;
1025      }
1026      if (status & MACE_IR_BABL) {
1027        /* Babble Error.  >1518 bytes transmitted. */
1028        lp->mace_stats.babl++;
1029      }
1030      if (status & MACE_IR_CERR) {
1031	/* Collision Error.  CERR indicates the absence of the
1032	   Signal Quality Error Test message after a packet
1033	   transmission. */
1034        lp->mace_stats.cerr++;
1035      }
1036      if (status & MACE_IR_RCVCCO) {
1037        /* Receive Collision Count Overflow; */
1038        lp->mace_stats.rcvcco++;
1039      }
1040      if (status & MACE_IR_RNTPCO) {
1041        /* Runt Packet Count Overflow */
1042        lp->mace_stats.rntpco++;
1043      }
1044      if (status & MACE_IR_MPCO) {
1045        /* Missed Packet Count Overflow */
1046        lp->mace_stats.mpco++;
1047      }
1048    } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */
1049
1050  } while ((status & ~MACE_IMR_DEFAULT) && (--IntrCnt));
1051
1052  return IRQ_HANDLED;
1053} /* mace_interrupt */
1054
1055/* ----------------------------------------------------------------------------
1056mace_rx
1057	Receives packets.
1058---------------------------------------------------------------------------- */
1059static int mace_rx(struct net_device *dev, unsigned char RxCnt)
1060{
1061  mace_private *lp = netdev_priv(dev);
1062  unsigned int ioaddr = dev->base_addr;
1063  unsigned char rx_framecnt;
1064  unsigned short rx_status;
1065
1066  while (
1067    ((rx_framecnt = inb(ioaddr + AM2150_RCV_FRAME_COUNT)) > 0) &&
1068    (rx_framecnt <= 12) && /* rx_framecnt==0xFF if card is extracted. */
1069    (RxCnt--)
1070  ) {
1071    rx_status = inw(ioaddr + AM2150_RCV);
1072
1073    pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status"
1074	  " 0x%X.\n", dev->name, rx_framecnt, rx_status);
1075
1076    if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */
1077      dev->stats.rx_errors++;
1078      if (rx_status & MACE_RCVFS_OFLO) {
1079        lp->mace_stats.oflo++;
1080      }
1081      if (rx_status & MACE_RCVFS_CLSN) {
1082        lp->mace_stats.clsn++;
1083      }
1084      if (rx_status & MACE_RCVFS_FRAM) {
1085	lp->mace_stats.fram++;
1086      }
1087      if (rx_status & MACE_RCVFS_FCS) {
1088        lp->mace_stats.fcs++;
1089      }
1090    } else {
1091      short pkt_len = (rx_status & ~MACE_RCVFS_RCVSTS) - 4;
1092        /* Auto Strip is off, always subtract 4 */
1093      struct sk_buff *skb;
1094
1095      lp->mace_stats.rfs_rntpc += inb(ioaddr + AM2150_RCV);
1096        /* runt packet count */
1097      lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV);
1098        /* rcv collision count */
1099
1100      pr_debug("    receiving packet size 0x%X rx_status"
1101	    " 0x%X.\n", pkt_len, rx_status);
1102
1103      skb = netdev_alloc_skb(dev, pkt_len + 2);
1104
1105      if (skb) {
1106	skb_reserve(skb, 2);
1107	insw(ioaddr + AM2150_RCV, skb_put(skb, pkt_len), pkt_len>>1);
1108	if (pkt_len & 1)
1109	    *(skb_tail_pointer(skb) - 1) = inb(ioaddr + AM2150_RCV);
1110	skb->protocol = eth_type_trans(skb, dev);
1111
1112	netif_rx(skb); /* Send the packet to the upper (protocol) layers. */
1113
1114	dev->stats.rx_packets++;
1115	dev->stats.rx_bytes += pkt_len;
1116	outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1117	continue;
1118      } else {
1119	pr_debug("%s: couldn't allocate a sk_buff of size"
1120	      " %d.\n", dev->name, pkt_len);
1121	dev->stats.rx_dropped++;
1122      }
1123    }
1124    outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1125  } /* while */
1126
1127  return 0;
1128} /* mace_rx */
1129
1130/* ----------------------------------------------------------------------------
1131pr_linux_stats
1132---------------------------------------------------------------------------- */
1133static void pr_linux_stats(struct net_device_stats *pstats)
1134{
1135  pr_debug("pr_linux_stats\n");
1136  pr_debug(" rx_packets=%-7ld        tx_packets=%ld\n",
1137	(long)pstats->rx_packets, (long)pstats->tx_packets);
1138  pr_debug(" rx_errors=%-7ld         tx_errors=%ld\n",
1139	(long)pstats->rx_errors, (long)pstats->tx_errors);
1140  pr_debug(" rx_dropped=%-7ld        tx_dropped=%ld\n",
1141	(long)pstats->rx_dropped, (long)pstats->tx_dropped);
1142  pr_debug(" multicast=%-7ld         collisions=%ld\n",
1143	(long)pstats->multicast, (long)pstats->collisions);
1144
1145  pr_debug(" rx_length_errors=%-7ld  rx_over_errors=%ld\n",
1146	(long)pstats->rx_length_errors, (long)pstats->rx_over_errors);
1147  pr_debug(" rx_crc_errors=%-7ld     rx_frame_errors=%ld\n",
1148	(long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors);
1149  pr_debug(" rx_fifo_errors=%-7ld    rx_missed_errors=%ld\n",
1150	(long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors);
1151
1152  pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
1153	(long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors);
1154  pr_debug(" tx_fifo_errors=%-7ld    tx_heartbeat_errors=%ld\n",
1155	(long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors);
1156  pr_debug(" tx_window_errors=%ld\n",
1157	(long)pstats->tx_window_errors);
1158} /* pr_linux_stats */
1159
1160/* ----------------------------------------------------------------------------
1161pr_mace_stats
1162---------------------------------------------------------------------------- */
1163static void pr_mace_stats(mace_statistics *pstats)
1164{
1165  pr_debug("pr_mace_stats\n");
1166
1167  pr_debug(" xmtsv=%-7d             uflo=%d\n",
1168	pstats->xmtsv, pstats->uflo);
1169  pr_debug(" lcol=%-7d              more=%d\n",
1170	pstats->lcol, pstats->more);
1171  pr_debug(" one=%-7d               defer=%d\n",
1172	pstats->one, pstats->defer);
1173  pr_debug(" lcar=%-7d              rtry=%d\n",
1174	pstats->lcar, pstats->rtry);
1175
1176  /* MACE_XMTRC */
1177  pr_debug(" exdef=%-7d             xmtrc=%d\n",
1178	pstats->exdef, pstats->xmtrc);
1179
1180  /* RFS1--Receive Status (RCVSTS) */
1181  pr_debug(" oflo=%-7d              clsn=%d\n",
1182	pstats->oflo, pstats->clsn);
1183  pr_debug(" fram=%-7d              fcs=%d\n",
1184	pstats->fram, pstats->fcs);
1185
1186  /* RFS2--Runt Packet Count (RNTPC) */
1187  /* RFS3--Receive Collision Count (RCVCC) */
1188  pr_debug(" rfs_rntpc=%-7d         rfs_rcvcc=%d\n",
1189	pstats->rfs_rntpc, pstats->rfs_rcvcc);
1190
1191  /* MACE_IR */
1192  pr_debug(" jab=%-7d               babl=%d\n",
1193	pstats->jab, pstats->babl);
1194  pr_debug(" cerr=%-7d              rcvcco=%d\n",
1195	pstats->cerr, pstats->rcvcco);
1196  pr_debug(" rntpco=%-7d            mpco=%d\n",
1197	pstats->rntpco, pstats->mpco);
1198
1199  /* MACE_MPC */
1200  pr_debug(" mpc=%d\n", pstats->mpc);
1201
1202  /* MACE_RNTPC */
1203  pr_debug(" rntpc=%d\n", pstats->rntpc);
1204
1205  /* MACE_RCVCC */
1206  pr_debug(" rcvcc=%d\n", pstats->rcvcc);
1207
1208} /* pr_mace_stats */
1209
1210/* ----------------------------------------------------------------------------
1211update_stats
1212	Update statistics.  We change to register window 1, so this
1213	should be run single-threaded if the device is active. This is
1214	expected to be a rare operation, and it's simpler for the rest
1215	of the driver to assume that window 0 is always valid rather
1216	than use a special window-state variable.
1217
1218	oflo & uflo should _never_ occur since it would mean the Xilinx
1219	was not able to transfer data between the MACE FIFO and the
1220	card's SRAM fast enough.  If this happens, something is
1221	seriously wrong with the hardware.
1222---------------------------------------------------------------------------- */
1223static void update_stats(unsigned int ioaddr, struct net_device *dev)
1224{
1225  mace_private *lp = netdev_priv(dev);
1226
1227  lp->mace_stats.rcvcc += mace_read(lp, ioaddr, MACE_RCVCC);
1228  lp->mace_stats.rntpc += mace_read(lp, ioaddr, MACE_RNTPC);
1229  lp->mace_stats.mpc += mace_read(lp, ioaddr, MACE_MPC);
1230  /* At this point, mace_stats is fully updated for this call.
1231     We may now update the netdev stats. */
1232
1233  /* The MACE has no equivalent for netdev stats field which are commented
1234     out. */
1235
1236  /* dev->stats.multicast; */
1237  dev->stats.collisions =
1238    lp->mace_stats.rcvcco * 256 + lp->mace_stats.rcvcc;
1239    /* Collision: The MACE may retry sending a packet 15 times
1240       before giving up.  The retry count is in XMTRC.
1241       Does each retry constitute a collision?
1242       If so, why doesn't the RCVCC record these collisions? */
1243
1244  /* detailed rx_errors: */
1245  dev->stats.rx_length_errors =
1246    lp->mace_stats.rntpco * 256 + lp->mace_stats.rntpc;
1247  /* dev->stats.rx_over_errors */
1248  dev->stats.rx_crc_errors = lp->mace_stats.fcs;
1249  dev->stats.rx_frame_errors = lp->mace_stats.fram;
1250  dev->stats.rx_fifo_errors = lp->mace_stats.oflo;
1251  dev->stats.rx_missed_errors =
1252    lp->mace_stats.mpco * 256 + lp->mace_stats.mpc;
1253
1254  /* detailed tx_errors */
1255  dev->stats.tx_aborted_errors = lp->mace_stats.rtry;
1256  dev->stats.tx_carrier_errors = lp->mace_stats.lcar;
1257    /* LCAR usually results from bad cabling. */
1258  dev->stats.tx_fifo_errors = lp->mace_stats.uflo;
1259  dev->stats.tx_heartbeat_errors = lp->mace_stats.cerr;
1260  /* dev->stats.tx_window_errors; */
1261} /* update_stats */
1262
1263/* ----------------------------------------------------------------------------
1264mace_get_stats
1265	Gathers ethernet statistics from the MACE chip.
1266---------------------------------------------------------------------------- */
1267static struct net_device_stats *mace_get_stats(struct net_device *dev)
1268{
1269  mace_private *lp = netdev_priv(dev);
1270
1271  update_stats(dev->base_addr, dev);
1272
1273  pr_debug("%s: updating the statistics.\n", dev->name);
1274  pr_linux_stats(&dev->stats);
1275  pr_mace_stats(&lp->mace_stats);
1276
1277  return &dev->stats;
1278} /* net_device_stats */
1279
1280/* ----------------------------------------------------------------------------
1281updateCRC
1282	Modified from Am79C90 data sheet.
1283---------------------------------------------------------------------------- */
1284
1285#ifdef BROKEN_MULTICAST
1286
1287static void updateCRC(int *CRC, int bit)
1288{
1289  static const int poly[]={
1290    1,1,1,0, 1,1,0,1,
1291    1,0,1,1, 1,0,0,0,
1292    1,0,0,0, 0,0,1,1,
1293    0,0,1,0, 0,0,0,0
1294  }; /* CRC polynomial.  poly[n] = coefficient of the x**n term of the
1295	CRC generator polynomial. */
1296
1297  int j;
1298
1299  /* shift CRC and control bit (CRC[32]) */
1300  for (j = 32; j > 0; j--)
1301    CRC[j] = CRC[j-1];
1302  CRC[0] = 0;
1303
1304  /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */
1305  if (bit ^ CRC[32])
1306    for (j = 0; j < 32; j++)
1307      CRC[j] ^= poly[j];
1308} /* updateCRC */
1309
1310/* ----------------------------------------------------------------------------
1311BuildLAF
1312	Build logical address filter.
1313	Modified from Am79C90 data sheet.
1314
1315Input
1316	ladrf: logical address filter (contents initialized to 0)
1317	adr: ethernet address
1318---------------------------------------------------------------------------- */
1319static void BuildLAF(int *ladrf, int *adr)
1320{
1321  int CRC[33]={1}; /* CRC register, 1 word/bit + extra control bit */
1322
1323  int i, byte; /* temporary array indices */
1324  int hashcode; /* the output object */
1325
1326  CRC[32]=0;
1327
1328  for (byte = 0; byte < 6; byte++)
1329    for (i = 0; i < 8; i++)
1330      updateCRC(CRC, (adr[byte] >> i) & 1);
1331
1332  hashcode = 0;
1333  for (i = 0; i < 6; i++)
1334    hashcode = (hashcode << 1) + CRC[i];
1335
1336  byte = hashcode >> 3;
1337  ladrf[byte] |= (1 << (hashcode & 7));
1338
1339#ifdef PCMCIA_DEBUG
1340  if (0)
1341    printk(KERN_DEBUG "    adr =%pM\n", adr);
1342  printk(KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63] =", hashcode);
1343  for (i = 0; i < 8; i++)
1344    pr_cont(" %02X", ladrf[i]);
1345  pr_cont("\n");
1346#endif
1347} /* BuildLAF */
1348
1349/* ----------------------------------------------------------------------------
1350restore_multicast_list
1351	Restores the multicast filter for MACE chip to the last
1352	set_multicast_list() call.
1353
1354Input
1355	multicast_num_addrs
1356	multicast_ladrf[]
1357---------------------------------------------------------------------------- */
1358static void restore_multicast_list(struct net_device *dev)
1359{
1360  mace_private *lp = netdev_priv(dev);
1361  int num_addrs = lp->multicast_num_addrs;
1362  int *ladrf = lp->multicast_ladrf;
1363  unsigned int ioaddr = dev->base_addr;
1364  int i;
1365
1366  pr_debug("%s: restoring Rx mode to %d addresses.\n",
1367	dev->name, num_addrs);
1368
1369  if (num_addrs > 0) {
1370
1371    pr_debug("Attempt to restore multicast list detected.\n");
1372
1373    mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR);
1374    /* Poll ADDRCHG bit */
1375    while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
1376      ;
1377    /* Set LADRF register */
1378    for (i = 0; i < MACE_LADRF_LEN; i++)
1379      mace_write(lp, ioaddr, MACE_LADRF, ladrf[i]);
1380
1381    mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_RCVFCSE | MACE_UTR_LOOP_EXTERNAL);
1382    mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1383
1384  } else if (num_addrs < 0) {
1385
1386    /* Promiscuous mode: receive all packets */
1387    mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1388    mace_write(lp, ioaddr, MACE_MACCC,
1389      MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1390    );
1391
1392  } else {
1393
1394    /* Normal mode */
1395    mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1396    mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1397
1398  }
1399} /* restore_multicast_list */
1400
1401/* ----------------------------------------------------------------------------
1402set_multicast_list
1403	Set or clear the multicast filter for this adaptor.
1404
1405Input
1406	num_addrs == -1	Promiscuous mode, receive all packets
1407	num_addrs == 0	Normal mode, clear multicast list
1408	num_addrs > 0	Multicast mode, receive normal and MC packets, and do
1409			best-effort filtering.
1410Output
1411	multicast_num_addrs
1412	multicast_ladrf[]
1413---------------------------------------------------------------------------- */
1414
1415static void set_multicast_list(struct net_device *dev)
1416{
1417  mace_private *lp = netdev_priv(dev);
1418  int adr[ETH_ALEN] = {0}; /* Ethernet address */
1419  struct netdev_hw_addr *ha;
1420
1421#ifdef PCMCIA_DEBUG
1422  {
1423    static int old;
1424    if (netdev_mc_count(dev) != old) {
1425      old = netdev_mc_count(dev);
1426      pr_debug("%s: setting Rx mode to %d addresses.\n",
1427	    dev->name, old);
1428    }
1429  }
1430#endif
1431
1432  /* Set multicast_num_addrs. */
1433  lp->multicast_num_addrs = netdev_mc_count(dev);
1434
1435  /* Set multicast_ladrf. */
1436  if (num_addrs > 0) {
1437    /* Calculate multicast logical address filter */
1438    memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
1439    netdev_for_each_mc_addr(ha, dev) {
1440      memcpy(adr, ha->addr, ETH_ALEN);
1441      BuildLAF(lp->multicast_ladrf, adr);
1442    }
1443  }
1444
1445  restore_multicast_list(dev);
1446
1447} /* set_multicast_list */
1448
1449#endif /* BROKEN_MULTICAST */
1450
1451static void restore_multicast_list(struct net_device *dev)
1452{
1453  unsigned int ioaddr = dev->base_addr;
1454  mace_private *lp = netdev_priv(dev);
1455
1456  pr_debug("%s: restoring Rx mode to %d addresses.\n", dev->name,
1457	lp->multicast_num_addrs);
1458
1459  if (dev->flags & IFF_PROMISC) {
1460    /* Promiscuous mode: receive all packets */
1461    mace_write(lp,ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1462    mace_write(lp, ioaddr, MACE_MACCC,
1463      MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1464    );
1465  } else {
1466    /* Normal mode */
1467    mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1468    mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1469  }
1470} /* restore_multicast_list */
1471
1472static void set_multicast_list(struct net_device *dev)
1473{
1474  mace_private *lp = netdev_priv(dev);
1475
1476#ifdef PCMCIA_DEBUG
1477  {
1478    static int old;
1479    if (netdev_mc_count(dev) != old) {
1480      old = netdev_mc_count(dev);
1481      pr_debug("%s: setting Rx mode to %d addresses.\n",
1482	    dev->name, old);
1483    }
1484  }
1485#endif
1486
1487  lp->multicast_num_addrs = netdev_mc_count(dev);
1488  restore_multicast_list(dev);
1489
1490} /* set_multicast_list */
1491
1492static const struct pcmcia_device_id nmclan_ids[] = {
1493	PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
1494	PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
1495	PCMCIA_DEVICE_NULL,
1496};
1497MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
1498
1499static struct pcmcia_driver nmclan_cs_driver = {
1500	.owner		= THIS_MODULE,
1501	.name		= "nmclan_cs",
1502	.probe		= nmclan_probe,
1503	.remove		= nmclan_detach,
1504	.id_table       = nmclan_ids,
1505	.suspend	= nmclan_suspend,
1506	.resume		= nmclan_resume,
1507};
1508module_pcmcia_driver(nmclan_cs_driver);
v4.6
   1/* ----------------------------------------------------------------------------
   2Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN.
   3  nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao
   4
   5  The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media
   6  Access Controller for Ethernet (MACE).  It is essentially the Am2150
   7  PCMCIA Ethernet card contained in the Am2150 Demo Kit.
   8
   9Written by Roger C. Pao <rpao@paonet.org>
  10  Copyright 1995 Roger C. Pao
  11  Linux 2.5 cleanups Copyright Red Hat 2003
  12
  13  This software may be used and distributed according to the terms of
  14  the GNU General Public License.
  15
  16Ported to Linux 1.3.* network driver environment by
  17  Matti Aarnio <mea@utu.fi>
  18
  19References
  20
  21  Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993
  22  Am79C940 (MACE) Data Sheet, 1994
  23  Am79C90 (C-LANCE) Data Sheet, 1994
  24  Linux PCMCIA Programmer's Guide v1.17
  25  /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8
  26
  27  Eric Mears, New Media Corporation
  28  Tom Pollard, New Media Corporation
  29  Dean Siasoyco, New Media Corporation
  30  Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com>
  31  Donald Becker <becker@scyld.com>
  32  David Hinds <dahinds@users.sourceforge.net>
  33
  34  The Linux client driver is based on the 3c589_cs.c client driver by
  35  David Hinds.
  36
  37  The Linux network driver outline is based on the 3c589_cs.c driver,
  38  the 8390.c driver, and the example skeleton.c kernel code, which are
  39  by Donald Becker.
  40
  41  The Am2150 network driver hardware interface code is based on the
  42  OS/9000 driver for the New Media Ethernet LAN by Eric Mears.
  43
  44  Special thanks for testing and help in debugging this driver goes
  45  to Ken Lesniak.
  46
  47-------------------------------------------------------------------------------
  48Driver Notes and Issues
  49-------------------------------------------------------------------------------
  50
  511. Developed on a Dell 320SLi
  52   PCMCIA Card Services 2.6.2
  53   Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386
  54
  552. rc.pcmcia may require loading pcmcia_core with io_speed=300:
  56   'insmod pcmcia_core.o io_speed=300'.
  57   This will avoid problems with fast systems which causes rx_framecnt
  58   to return random values.
  59
  603. If hot extraction does not work for you, use 'ifconfig eth0 down'
  61   before extraction.
  62
  634. There is a bad slow-down problem in this driver.
  64
  655. Future: Multicast processing.  In the meantime, do _not_ compile your
  66   kernel with multicast ip enabled.
  67
  68-------------------------------------------------------------------------------
  69History
  70-------------------------------------------------------------------------------
  71Log: nmclan_cs.c,v
  72 * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk>
  73 * Fixed hang on card eject as we probe it
  74 * Cleaned up to use new style locking.
  75 *
  76 * Revision 0.16  1995/07/01  06:42:17  rpao
  77 * Bug fix: nmclan_reset() called CardServices incorrectly.
  78 *
  79 * Revision 0.15  1995/05/24  08:09:47  rpao
  80 * Re-implement MULTI_TX dev->tbusy handling.
  81 *
  82 * Revision 0.14  1995/05/23  03:19:30  rpao
  83 * Added, in nmclan_config(), "tuple.Attributes = 0;".
  84 * Modified MACE ID check to ignore chip revision level.
  85 * Avoid tx_free_frames race condition between _start_xmit and _interrupt.
  86 *
  87 * Revision 0.13  1995/05/18  05:56:34  rpao
  88 * Statistics changes.
  89 * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list.
  90 * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT.  Fixes driver lockup.
  91 *
  92 * Revision 0.12  1995/05/14  00:12:23  rpao
  93 * Statistics overhaul.
  94 *
  95
  9695/05/13 rpao	V0.10a
  97		Bug fix: MACE statistics counters used wrong I/O ports.
  98		Bug fix: mace_interrupt() needed to allow statistics to be
  99		processed without RX or TX interrupts pending.
 10095/05/11 rpao	V0.10
 101		Multiple transmit request processing.
 102		Modified statistics to use MACE counters where possible.
 10395/05/10 rpao	V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO.
 104		*Released
 10595/05/10 rpao	V0.08
 106		Bug fix: Make all non-exported functions private by using
 107		static keyword.
 108		Bug fix: Test IntrCnt _before_ reading MACE_IR.
 10995/05/10 rpao	V0.07 Statistics.
 11095/05/09 rpao	V0.06 Fix rx_framecnt problem by addition of PCIC wait states.
 111
 112---------------------------------------------------------------------------- */
 113
 114#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 115
 116#define DRV_NAME	"nmclan_cs"
 117#define DRV_VERSION	"0.16"
 118
 119
 120/* ----------------------------------------------------------------------------
 121Conditional Compilation Options
 122---------------------------------------------------------------------------- */
 123
 124#define MULTI_TX			0
 125#define RESET_ON_TIMEOUT		1
 126#define TX_INTERRUPTABLE		1
 127#define RESET_XILINX			0
 128
 129/* ----------------------------------------------------------------------------
 130Include Files
 131---------------------------------------------------------------------------- */
 132
 133#include <linux/module.h>
 134#include <linux/kernel.h>
 135#include <linux/ptrace.h>
 136#include <linux/slab.h>
 137#include <linux/string.h>
 138#include <linux/timer.h>
 139#include <linux/interrupt.h>
 140#include <linux/in.h>
 141#include <linux/delay.h>
 142#include <linux/ethtool.h>
 143#include <linux/netdevice.h>
 144#include <linux/etherdevice.h>
 145#include <linux/skbuff.h>
 146#include <linux/if_arp.h>
 147#include <linux/ioport.h>
 148#include <linux/bitops.h>
 149
 150#include <pcmcia/cisreg.h>
 151#include <pcmcia/cistpl.h>
 152#include <pcmcia/ds.h>
 153
 154#include <asm/uaccess.h>
 155#include <asm/io.h>
 156
 157/* ----------------------------------------------------------------------------
 158Defines
 159---------------------------------------------------------------------------- */
 160
 161#define MACE_LADRF_LEN			8
 162					/* 8 bytes in Logical Address Filter */
 163
 164/* Loop Control Defines */
 165#define MACE_MAX_IR_ITERATIONS		10
 166#define MACE_MAX_RX_ITERATIONS		12
 167	/*
 168	TBD: Dean brought this up, and I assumed the hardware would
 169	handle it:
 170
 171	If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be
 172	non-zero when the isr exits.  We may not get another interrupt
 173	to process the remaining packets for some time.
 174	*/
 175
 176/*
 177The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA)
 178which manages the interface between the MACE and the PCMCIA bus.  It
 179also includes buffer management for the 32K x 8 SRAM to control up to
 180four transmit and 12 receive frames at a time.
 181*/
 182#define AM2150_MAX_TX_FRAMES		4
 183#define AM2150_MAX_RX_FRAMES		12
 184
 185/* Am2150 Ethernet Card I/O Mapping */
 186#define AM2150_RCV			0x00
 187#define AM2150_XMT			0x04
 188#define AM2150_XMT_SKIP			0x09
 189#define AM2150_RCV_NEXT			0x0A
 190#define AM2150_RCV_FRAME_COUNT		0x0B
 191#define AM2150_MACE_BANK		0x0C
 192#define AM2150_MACE_BASE		0x10
 193
 194/* MACE Registers */
 195#define MACE_RCVFIFO			0
 196#define MACE_XMTFIFO			1
 197#define MACE_XMTFC			2
 198#define MACE_XMTFS			3
 199#define MACE_XMTRC			4
 200#define MACE_RCVFC			5
 201#define MACE_RCVFS			6
 202#define MACE_FIFOFC			7
 203#define MACE_IR				8
 204#define MACE_IMR			9
 205#define MACE_PR				10
 206#define MACE_BIUCC			11
 207#define MACE_FIFOCC			12
 208#define MACE_MACCC			13
 209#define MACE_PLSCC			14
 210#define MACE_PHYCC			15
 211#define MACE_CHIPIDL			16
 212#define MACE_CHIPIDH			17
 213#define MACE_IAC			18
 214/* Reserved */
 215#define MACE_LADRF			20
 216#define MACE_PADR			21
 217/* Reserved */
 218/* Reserved */
 219#define MACE_MPC			24
 220/* Reserved */
 221#define MACE_RNTPC			26
 222#define MACE_RCVCC			27
 223/* Reserved */
 224#define MACE_UTR			29
 225#define MACE_RTR1			30
 226#define MACE_RTR2			31
 227
 228/* MACE Bit Masks */
 229#define MACE_XMTRC_EXDEF		0x80
 230#define MACE_XMTRC_XMTRC		0x0F
 231
 232#define MACE_XMTFS_XMTSV		0x80
 233#define MACE_XMTFS_UFLO			0x40
 234#define MACE_XMTFS_LCOL			0x20
 235#define MACE_XMTFS_MORE			0x10
 236#define MACE_XMTFS_ONE			0x08
 237#define MACE_XMTFS_DEFER		0x04
 238#define MACE_XMTFS_LCAR			0x02
 239#define MACE_XMTFS_RTRY			0x01
 240
 241#define MACE_RCVFS_RCVSTS		0xF000
 242#define MACE_RCVFS_OFLO			0x8000
 243#define MACE_RCVFS_CLSN			0x4000
 244#define MACE_RCVFS_FRAM			0x2000
 245#define MACE_RCVFS_FCS			0x1000
 246
 247#define MACE_FIFOFC_RCVFC		0xF0
 248#define MACE_FIFOFC_XMTFC		0x0F
 249
 250#define MACE_IR_JAB			0x80
 251#define MACE_IR_BABL			0x40
 252#define MACE_IR_CERR			0x20
 253#define MACE_IR_RCVCCO			0x10
 254#define MACE_IR_RNTPCO			0x08
 255#define MACE_IR_MPCO			0x04
 256#define MACE_IR_RCVINT			0x02
 257#define MACE_IR_XMTINT			0x01
 258
 259#define MACE_MACCC_PROM			0x80
 260#define MACE_MACCC_DXMT2PD		0x40
 261#define MACE_MACCC_EMBA			0x20
 262#define MACE_MACCC_RESERVED		0x10
 263#define MACE_MACCC_DRCVPA		0x08
 264#define MACE_MACCC_DRCVBC		0x04
 265#define MACE_MACCC_ENXMT		0x02
 266#define MACE_MACCC_ENRCV		0x01
 267
 268#define MACE_PHYCC_LNKFL		0x80
 269#define MACE_PHYCC_DLNKTST		0x40
 270#define MACE_PHYCC_REVPOL		0x20
 271#define MACE_PHYCC_DAPC			0x10
 272#define MACE_PHYCC_LRT			0x08
 273#define MACE_PHYCC_ASEL			0x04
 274#define MACE_PHYCC_RWAKE		0x02
 275#define MACE_PHYCC_AWAKE		0x01
 276
 277#define MACE_IAC_ADDRCHG		0x80
 278#define MACE_IAC_PHYADDR		0x04
 279#define MACE_IAC_LOGADDR		0x02
 280
 281#define MACE_UTR_RTRE			0x80
 282#define MACE_UTR_RTRD			0x40
 283#define MACE_UTR_RPA			0x20
 284#define MACE_UTR_FCOLL			0x10
 285#define MACE_UTR_RCVFCSE		0x08
 286#define MACE_UTR_LOOP_INCL_MENDEC	0x06
 287#define MACE_UTR_LOOP_NO_MENDEC		0x04
 288#define MACE_UTR_LOOP_EXTERNAL		0x02
 289#define MACE_UTR_LOOP_NONE		0x00
 290#define MACE_UTR_RESERVED		0x01
 291
 292/* Switch MACE register bank (only 0 and 1 are valid) */
 293#define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK)
 294
 295#define MACE_IMR_DEFAULT \
 296  (0xFF - \
 297    ( \
 298      MACE_IR_CERR | \
 299      MACE_IR_RCVCCO | \
 300      MACE_IR_RNTPCO | \
 301      MACE_IR_MPCO | \
 302      MACE_IR_RCVINT | \
 303      MACE_IR_XMTINT \
 304    ) \
 305  )
 306#undef MACE_IMR_DEFAULT
 307#define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */
 308
 309#define TX_TIMEOUT		((400*HZ)/1000)
 310
 311/* ----------------------------------------------------------------------------
 312Type Definitions
 313---------------------------------------------------------------------------- */
 314
 315typedef struct _mace_statistics {
 316    /* MACE_XMTFS */
 317    int xmtsv;
 318    int uflo;
 319    int lcol;
 320    int more;
 321    int one;
 322    int defer;
 323    int lcar;
 324    int rtry;
 325
 326    /* MACE_XMTRC */
 327    int exdef;
 328    int xmtrc;
 329
 330    /* RFS1--Receive Status (RCVSTS) */
 331    int oflo;
 332    int clsn;
 333    int fram;
 334    int fcs;
 335
 336    /* RFS2--Runt Packet Count (RNTPC) */
 337    int rfs_rntpc;
 338
 339    /* RFS3--Receive Collision Count (RCVCC) */
 340    int rfs_rcvcc;
 341
 342    /* MACE_IR */
 343    int jab;
 344    int babl;
 345    int cerr;
 346    int rcvcco;
 347    int rntpco;
 348    int mpco;
 349
 350    /* MACE_MPC */
 351    int mpc;
 352
 353    /* MACE_RNTPC */
 354    int rntpc;
 355
 356    /* MACE_RCVCC */
 357    int rcvcc;
 358} mace_statistics;
 359
 360typedef struct _mace_private {
 361	struct pcmcia_device	*p_dev;
 362    struct net_device_stats linux_stats; /* Linux statistics counters */
 363    mace_statistics mace_stats; /* MACE chip statistics counters */
 364
 365    /* restore_multicast_list() state variables */
 366    int multicast_ladrf[MACE_LADRF_LEN]; /* Logical address filter */
 367    int multicast_num_addrs;
 368
 369    char tx_free_frames; /* Number of free transmit frame buffers */
 370    char tx_irq_disabled; /* MACE TX interrupt disabled */
 371    
 372    spinlock_t bank_lock; /* Must be held if you step off bank 0 */
 373} mace_private;
 374
 375/* ----------------------------------------------------------------------------
 376Private Global Variables
 377---------------------------------------------------------------------------- */
 378
 379static const char *if_names[]={
 380    "Auto", "10baseT", "BNC",
 381};
 382
 383/* ----------------------------------------------------------------------------
 384Parameters
 385	These are the parameters that can be set during loading with
 386	'insmod'.
 387---------------------------------------------------------------------------- */
 388
 389MODULE_DESCRIPTION("New Media PCMCIA ethernet driver");
 390MODULE_LICENSE("GPL");
 391
 392#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
 393
 394/* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
 395INT_MODULE_PARM(if_port, 0);
 396
 397
 398/* ----------------------------------------------------------------------------
 399Function Prototypes
 400---------------------------------------------------------------------------- */
 401
 402static int nmclan_config(struct pcmcia_device *link);
 403static void nmclan_release(struct pcmcia_device *link);
 404
 405static void nmclan_reset(struct net_device *dev);
 406static int mace_config(struct net_device *dev, struct ifmap *map);
 407static int mace_open(struct net_device *dev);
 408static int mace_close(struct net_device *dev);
 409static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
 410					 struct net_device *dev);
 411static void mace_tx_timeout(struct net_device *dev);
 412static irqreturn_t mace_interrupt(int irq, void *dev_id);
 413static struct net_device_stats *mace_get_stats(struct net_device *dev);
 414static int mace_rx(struct net_device *dev, unsigned char RxCnt);
 415static void restore_multicast_list(struct net_device *dev);
 416static void set_multicast_list(struct net_device *dev);
 417static const struct ethtool_ops netdev_ethtool_ops;
 418
 419
 420static void nmclan_detach(struct pcmcia_device *p_dev);
 421
 422static const struct net_device_ops mace_netdev_ops = {
 423	.ndo_open		= mace_open,
 424	.ndo_stop		= mace_close,
 425	.ndo_start_xmit		= mace_start_xmit,
 426	.ndo_tx_timeout		= mace_tx_timeout,
 427	.ndo_set_config		= mace_config,
 428	.ndo_get_stats		= mace_get_stats,
 429	.ndo_set_rx_mode	= set_multicast_list,
 430	.ndo_change_mtu		= eth_change_mtu,
 431	.ndo_set_mac_address 	= eth_mac_addr,
 432	.ndo_validate_addr	= eth_validate_addr,
 433};
 434
 435static int nmclan_probe(struct pcmcia_device *link)
 436{
 437    mace_private *lp;
 438    struct net_device *dev;
 439
 440    dev_dbg(&link->dev, "nmclan_attach()\n");
 441
 442    /* Create new ethernet device */
 443    dev = alloc_etherdev(sizeof(mace_private));
 444    if (!dev)
 445	    return -ENOMEM;
 446    lp = netdev_priv(dev);
 447    lp->p_dev = link;
 448    link->priv = dev;
 449    
 450    spin_lock_init(&lp->bank_lock);
 451    link->resource[0]->end = 32;
 452    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 453    link->config_flags |= CONF_ENABLE_IRQ;
 454    link->config_index = 1;
 455    link->config_regs = PRESENT_OPTION;
 456
 457    lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 458
 459    dev->netdev_ops = &mace_netdev_ops;
 460    dev->ethtool_ops = &netdev_ethtool_ops;
 461    dev->watchdog_timeo = TX_TIMEOUT;
 462
 463    return nmclan_config(link);
 464} /* nmclan_attach */
 465
 466static void nmclan_detach(struct pcmcia_device *link)
 467{
 468    struct net_device *dev = link->priv;
 469
 470    dev_dbg(&link->dev, "nmclan_detach\n");
 471
 472    unregister_netdev(dev);
 473
 474    nmclan_release(link);
 475
 476    free_netdev(dev);
 477} /* nmclan_detach */
 478
 479/* ----------------------------------------------------------------------------
 480mace_read
 481	Reads a MACE register.  This is bank independent; however, the
 482	caller must ensure that this call is not interruptable.  We are
 483	assuming that during normal operation, the MACE is always in
 484	bank 0.
 485---------------------------------------------------------------------------- */
 486static int mace_read(mace_private *lp, unsigned int ioaddr, int reg)
 487{
 488  int data = 0xFF;
 489  unsigned long flags;
 490
 491  switch (reg >> 4) {
 492    case 0: /* register 0-15 */
 493      data = inb(ioaddr + AM2150_MACE_BASE + reg);
 494      break;
 495    case 1: /* register 16-31 */
 496      spin_lock_irqsave(&lp->bank_lock, flags);
 497      MACEBANK(1);
 498      data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
 499      MACEBANK(0);
 500      spin_unlock_irqrestore(&lp->bank_lock, flags);
 501      break;
 502  }
 503  return data & 0xFF;
 504} /* mace_read */
 505
 506/* ----------------------------------------------------------------------------
 507mace_write
 508	Writes to a MACE register.  This is bank independent; however,
 509	the caller must ensure that this call is not interruptable.  We
 510	are assuming that during normal operation, the MACE is always in
 511	bank 0.
 512---------------------------------------------------------------------------- */
 513static void mace_write(mace_private *lp, unsigned int ioaddr, int reg,
 514		       int data)
 515{
 516  unsigned long flags;
 517
 518  switch (reg >> 4) {
 519    case 0: /* register 0-15 */
 520      outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg);
 521      break;
 522    case 1: /* register 16-31 */
 523      spin_lock_irqsave(&lp->bank_lock, flags);
 524      MACEBANK(1);
 525      outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F));
 526      MACEBANK(0);
 527      spin_unlock_irqrestore(&lp->bank_lock, flags);
 528      break;
 529  }
 530} /* mace_write */
 531
 532/* ----------------------------------------------------------------------------
 533mace_init
 534	Resets the MACE chip.
 535---------------------------------------------------------------------------- */
 536static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
 
 537{
 538  int i;
 539  int ct = 0;
 540
 541  /* MACE Software reset */
 542  mace_write(lp, ioaddr, MACE_BIUCC, 1);
 543  while (mace_read(lp, ioaddr, MACE_BIUCC) & 0x01) {
 544    /* Wait for reset bit to be cleared automatically after <= 200ns */;
 545    if(++ct > 500)
 546    {
 547	pr_err("reset failed, card removed?\n");
 548    	return -1;
 549    }
 550    udelay(1);
 551  }
 552  mace_write(lp, ioaddr, MACE_BIUCC, 0);
 553
 554  /* The Am2150 requires that the MACE FIFOs operate in burst mode. */
 555  mace_write(lp, ioaddr, MACE_FIFOCC, 0x0F);
 556
 557  mace_write(lp,ioaddr, MACE_RCVFC, 0); /* Disable Auto Strip Receive */
 558  mace_write(lp, ioaddr, MACE_IMR, 0xFF); /* Disable all interrupts until _open */
 559
 560  /*
 561   * Bit 2-1 PORTSEL[1-0] Port Select.
 562   * 00 AUI/10Base-2
 563   * 01 10Base-T
 564   * 10 DAI Port (reserved in Am2150)
 565   * 11 GPSI
 566   * For this card, only the first two are valid.
 567   * So, PLSCC should be set to
 568   * 0x00 for 10Base-2
 569   * 0x02 for 10Base-T
 570   * Or just set ASEL in PHYCC below!
 571   */
 572  switch (if_port) {
 573    case 1:
 574      mace_write(lp, ioaddr, MACE_PLSCC, 0x02);
 575      break;
 576    case 2:
 577      mace_write(lp, ioaddr, MACE_PLSCC, 0x00);
 578      break;
 579    default:
 580      mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4);
 581      /* ASEL Auto Select.  When set, the PORTSEL[1-0] bits are overridden,
 582	 and the MACE device will automatically select the operating media
 583	 interface port. */
 584      break;
 585  }
 586
 587  mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_PHYADDR);
 588  /* Poll ADDRCHG bit */
 589  ct = 0;
 590  while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
 591  {
 592  	if(++ ct > 500)
 593  	{
 594		pr_err("ADDRCHG timeout, card removed?\n");
 595  		return -1;
 596  	}
 597  }
 598  /* Set PADR register */
 599  for (i = 0; i < ETH_ALEN; i++)
 600    mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]);
 601
 602  /* MAC Configuration Control Register should be written last */
 603  /* Let set_multicast_list set this. */
 604  /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */
 605  mace_write(lp, ioaddr, MACE_MACCC, 0x00);
 606  return 0;
 607} /* mace_init */
 608
 609static int nmclan_config(struct pcmcia_device *link)
 610{
 611  struct net_device *dev = link->priv;
 612  mace_private *lp = netdev_priv(dev);
 613  u8 *buf;
 614  size_t len;
 615  int i, ret;
 616  unsigned int ioaddr;
 617
 618  dev_dbg(&link->dev, "nmclan_config\n");
 619
 620  link->io_lines = 5;
 621  ret = pcmcia_request_io(link);
 622  if (ret)
 623	  goto failed;
 624  ret = pcmcia_request_irq(link, mace_interrupt);
 625  if (ret)
 626	  goto failed;
 627  ret = pcmcia_enable_device(link);
 628  if (ret)
 629	  goto failed;
 630
 631  dev->irq = link->irq;
 632  dev->base_addr = link->resource[0]->start;
 633
 634  ioaddr = dev->base_addr;
 635
 636  /* Read the ethernet address from the CIS. */
 637  len = pcmcia_get_tuple(link, 0x80, &buf);
 638  if (!buf || len < ETH_ALEN) {
 639	  kfree(buf);
 640	  goto failed;
 641  }
 642  memcpy(dev->dev_addr, buf, ETH_ALEN);
 643  kfree(buf);
 644
 645  /* Verify configuration by reading the MACE ID. */
 646  {
 647    char sig[2];
 648
 649    sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL);
 650    sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH);
 651    if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) {
 652      dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n",
 653	    sig[0], sig[1]);
 654    } else {
 655      pr_notice("mace id not found: %x %x should be 0x40 0x?9\n",
 656		sig[0], sig[1]);
 657      return -ENODEV;
 658    }
 659  }
 660
 661  if(mace_init(lp, ioaddr, dev->dev_addr) == -1)
 662  	goto failed;
 663
 664  /* The if_port symbol can be set when the module is loaded */
 665  if (if_port <= 2)
 666    dev->if_port = if_port;
 667  else
 668    pr_notice("invalid if_port requested\n");
 669
 670  SET_NETDEV_DEV(dev, &link->dev);
 671
 672  i = register_netdev(dev);
 673  if (i != 0) {
 674    pr_notice("register_netdev() failed\n");
 675    goto failed;
 676  }
 677
 678  netdev_info(dev, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n",
 679	      dev->base_addr, dev->irq, if_names[dev->if_port], dev->dev_addr);
 680  return 0;
 681
 682failed:
 683	nmclan_release(link);
 684	return -ENODEV;
 685} /* nmclan_config */
 686
 687static void nmclan_release(struct pcmcia_device *link)
 688{
 689	dev_dbg(&link->dev, "nmclan_release\n");
 690	pcmcia_disable_device(link);
 691}
 692
 693static int nmclan_suspend(struct pcmcia_device *link)
 694{
 695	struct net_device *dev = link->priv;
 696
 697	if (link->open)
 698		netif_device_detach(dev);
 699
 700	return 0;
 701}
 702
 703static int nmclan_resume(struct pcmcia_device *link)
 704{
 705	struct net_device *dev = link->priv;
 706
 707	if (link->open) {
 708		nmclan_reset(dev);
 709		netif_device_attach(dev);
 710	}
 711
 712	return 0;
 713}
 714
 715
 716/* ----------------------------------------------------------------------------
 717nmclan_reset
 718	Reset and restore all of the Xilinx and MACE registers.
 719---------------------------------------------------------------------------- */
 720static void nmclan_reset(struct net_device *dev)
 721{
 722  mace_private *lp = netdev_priv(dev);
 723
 724#if RESET_XILINX
 725  struct pcmcia_device *link = &lp->link;
 726  u8 OrigCorValue;
 727
 728  /* Save original COR value */
 729  pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
 730
 731  /* Reset Xilinx */
 732  dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
 733	OrigCorValue);
 734  pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
 735  /* Need to wait for 20 ms for PCMCIA to finish reset. */
 736
 737  /* Restore original COR configuration index */
 738  pcmcia_write_config_byte(link, CISREG_COR,
 739			  (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
 740  /* Xilinx is now completely reset along with the MACE chip. */
 741  lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 742
 743#endif /* #if RESET_XILINX */
 744
 745  /* Xilinx is now completely reset along with the MACE chip. */
 746  lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 747
 748  /* Reinitialize the MACE chip for operation. */
 749  mace_init(lp, dev->base_addr, dev->dev_addr);
 750  mace_write(lp, dev->base_addr, MACE_IMR, MACE_IMR_DEFAULT);
 751
 752  /* Restore the multicast list and enable TX and RX. */
 753  restore_multicast_list(dev);
 754} /* nmclan_reset */
 755
 756/* ----------------------------------------------------------------------------
 757mace_config
 758	[Someone tell me what this is supposed to do?  Is if_port a defined
 759	standard?  If so, there should be defines to indicate 1=10Base-T,
 760	2=10Base-2, etc. including limited automatic detection.]
 761---------------------------------------------------------------------------- */
 762static int mace_config(struct net_device *dev, struct ifmap *map)
 763{
 764  if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
 765    if (map->port <= 2) {
 766      dev->if_port = map->port;
 767      netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
 768    } else
 769      return -EINVAL;
 770  }
 771  return 0;
 772} /* mace_config */
 773
 774/* ----------------------------------------------------------------------------
 775mace_open
 776	Open device driver.
 777---------------------------------------------------------------------------- */
 778static int mace_open(struct net_device *dev)
 779{
 780  unsigned int ioaddr = dev->base_addr;
 781  mace_private *lp = netdev_priv(dev);
 782  struct pcmcia_device *link = lp->p_dev;
 783
 784  if (!pcmcia_dev_present(link))
 785    return -ENODEV;
 786
 787  link->open++;
 788
 789  MACEBANK(0);
 790
 791  netif_start_queue(dev);
 792  nmclan_reset(dev);
 793
 794  return 0; /* Always succeed */
 795} /* mace_open */
 796
 797/* ----------------------------------------------------------------------------
 798mace_close
 799	Closes device driver.
 800---------------------------------------------------------------------------- */
 801static int mace_close(struct net_device *dev)
 802{
 803  unsigned int ioaddr = dev->base_addr;
 804  mace_private *lp = netdev_priv(dev);
 805  struct pcmcia_device *link = lp->p_dev;
 806
 807  dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
 808
 809  /* Mask off all interrupts from the MACE chip. */
 810  outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR);
 811
 812  link->open--;
 813  netif_stop_queue(dev);
 814
 815  return 0;
 816} /* mace_close */
 817
 818static void netdev_get_drvinfo(struct net_device *dev,
 819			       struct ethtool_drvinfo *info)
 820{
 821	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
 822	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
 823	snprintf(info->bus_info, sizeof(info->bus_info),
 824		"PCMCIA 0x%lx", dev->base_addr);
 825}
 826
 827static const struct ethtool_ops netdev_ethtool_ops = {
 828	.get_drvinfo		= netdev_get_drvinfo,
 829};
 830
 831/* ----------------------------------------------------------------------------
 832mace_start_xmit
 833	This routine begins the packet transmit function.  When completed,
 834	it will generate a transmit interrupt.
 835
 836	According to /usr/src/linux/net/inet/dev.c, if _start_xmit
 837	returns 0, the "packet is now solely the responsibility of the
 838	driver."  If _start_xmit returns non-zero, the "transmission
 839	failed, put skb back into a list."
 840---------------------------------------------------------------------------- */
 841
 842static void mace_tx_timeout(struct net_device *dev)
 843{
 844  mace_private *lp = netdev_priv(dev);
 845  struct pcmcia_device *link = lp->p_dev;
 846
 847  netdev_notice(dev, "transmit timed out -- ");
 848#if RESET_ON_TIMEOUT
 849  pr_cont("resetting card\n");
 850  pcmcia_reset_card(link->socket);
 851#else /* #if RESET_ON_TIMEOUT */
 852  pr_cont("NOT resetting card\n");
 853#endif /* #if RESET_ON_TIMEOUT */
 854  dev->trans_start = jiffies; /* prevent tx timeout */
 855  netif_wake_queue(dev);
 856}
 857
 858static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
 859					 struct net_device *dev)
 860{
 861  mace_private *lp = netdev_priv(dev);
 862  unsigned int ioaddr = dev->base_addr;
 863
 864  netif_stop_queue(dev);
 865
 866  pr_debug("%s: mace_start_xmit(length = %ld) called.\n",
 867	dev->name, (long)skb->len);
 868
 869#if (!TX_INTERRUPTABLE)
 870  /* Disable MACE TX interrupts. */
 871  outb(MACE_IMR_DEFAULT | MACE_IR_XMTINT,
 872    ioaddr + AM2150_MACE_BASE + MACE_IMR);
 873  lp->tx_irq_disabled=1;
 874#endif /* #if (!TX_INTERRUPTABLE) */
 875
 876  {
 877    /* This block must not be interrupted by another transmit request!
 878       mace_tx_timeout will take care of timer-based retransmissions from
 879       the upper layers.  The interrupt handler is guaranteed never to
 880       service a transmit interrupt while we are in here.
 881    */
 882
 883    lp->linux_stats.tx_bytes += skb->len;
 884    lp->tx_free_frames--;
 885
 886    /* WARNING: Write the _exact_ number of bytes written in the header! */
 887    /* Put out the word header [must be an outw()] . . . */
 888    outw(skb->len, ioaddr + AM2150_XMT);
 889    /* . . . and the packet [may be any combination of outw() and outb()] */
 890    outsw(ioaddr + AM2150_XMT, skb->data, skb->len >> 1);
 891    if (skb->len & 1) {
 892      /* Odd byte transfer */
 893      outb(skb->data[skb->len-1], ioaddr + AM2150_XMT);
 894    }
 895
 896#if MULTI_TX
 897    if (lp->tx_free_frames > 0)
 898      netif_start_queue(dev);
 899#endif /* #if MULTI_TX */
 900  }
 901
 902#if (!TX_INTERRUPTABLE)
 903  /* Re-enable MACE TX interrupts. */
 904  lp->tx_irq_disabled=0;
 905  outb(MACE_IMR_DEFAULT, ioaddr + AM2150_MACE_BASE + MACE_IMR);
 906#endif /* #if (!TX_INTERRUPTABLE) */
 907
 908  dev_kfree_skb(skb);
 909
 910  return NETDEV_TX_OK;
 911} /* mace_start_xmit */
 912
 913/* ----------------------------------------------------------------------------
 914mace_interrupt
 915	The interrupt handler.
 916---------------------------------------------------------------------------- */
 917static irqreturn_t mace_interrupt(int irq, void *dev_id)
 918{
 919  struct net_device *dev = (struct net_device *) dev_id;
 920  mace_private *lp = netdev_priv(dev);
 921  unsigned int ioaddr;
 922  int status;
 923  int IntrCnt = MACE_MAX_IR_ITERATIONS;
 924
 925  if (dev == NULL) {
 926    pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n",
 927	  irq);
 928    return IRQ_NONE;
 929  }
 930
 931  ioaddr = dev->base_addr;
 932
 933  if (lp->tx_irq_disabled) {
 934    const char *msg;
 935    if (lp->tx_irq_disabled)
 936      msg = "Interrupt with tx_irq_disabled";
 937    else
 938      msg = "Re-entering the interrupt handler";
 939    netdev_notice(dev, "%s [isr=%02X, imr=%02X]\n",
 940		  msg,
 941		  inb(ioaddr + AM2150_MACE_BASE + MACE_IR),
 942		  inb(ioaddr + AM2150_MACE_BASE + MACE_IMR));
 943    /* WARNING: MACE_IR has been read! */
 944    return IRQ_NONE;
 945  }
 946
 947  if (!netif_device_present(dev)) {
 948    netdev_dbg(dev, "interrupt from dead card\n");
 949    return IRQ_NONE;
 950  }
 951
 952  do {
 953    /* WARNING: MACE_IR is a READ/CLEAR port! */
 954    status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR);
 955    if (!(status & ~MACE_IMR_DEFAULT) && IntrCnt == MACE_MAX_IR_ITERATIONS)
 956      return IRQ_NONE;
 957
 958    pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
 959
 960    if (status & MACE_IR_RCVINT) {
 961      mace_rx(dev, MACE_MAX_RX_ITERATIONS);
 962    }
 963
 964    if (status & MACE_IR_XMTINT) {
 965      unsigned char fifofc;
 966      unsigned char xmtrc;
 967      unsigned char xmtfs;
 968
 969      fifofc = inb(ioaddr + AM2150_MACE_BASE + MACE_FIFOFC);
 970      if ((fifofc & MACE_FIFOFC_XMTFC)==0) {
 971	lp->linux_stats.tx_errors++;
 972	outb(0xFF, ioaddr + AM2150_XMT_SKIP);
 973      }
 974
 975      /* Transmit Retry Count (XMTRC, reg 4) */
 976      xmtrc = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTRC);
 977      if (xmtrc & MACE_XMTRC_EXDEF) lp->mace_stats.exdef++;
 978      lp->mace_stats.xmtrc += (xmtrc & MACE_XMTRC_XMTRC);
 979
 980      if (
 981        (xmtfs = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTFS)) &
 982        MACE_XMTFS_XMTSV /* Transmit Status Valid */
 983      ) {
 984	lp->mace_stats.xmtsv++;
 985
 986	if (xmtfs & ~MACE_XMTFS_XMTSV) {
 987	  if (xmtfs & MACE_XMTFS_UFLO) {
 988	    /* Underflow.  Indicates that the Transmit FIFO emptied before
 989	       the end of frame was reached. */
 990	    lp->mace_stats.uflo++;
 991	  }
 992	  if (xmtfs & MACE_XMTFS_LCOL) {
 993	    /* Late Collision */
 994	    lp->mace_stats.lcol++;
 995	  }
 996	  if (xmtfs & MACE_XMTFS_MORE) {
 997	    /* MORE than one retry was needed */
 998	    lp->mace_stats.more++;
 999	  }
1000	  if (xmtfs & MACE_XMTFS_ONE) {
1001	    /* Exactly ONE retry occurred */
1002	    lp->mace_stats.one++;
1003	  }
1004	  if (xmtfs & MACE_XMTFS_DEFER) {
1005	    /* Transmission was defered */
1006	    lp->mace_stats.defer++;
1007	  }
1008	  if (xmtfs & MACE_XMTFS_LCAR) {
1009	    /* Loss of carrier */
1010	    lp->mace_stats.lcar++;
1011	  }
1012	  if (xmtfs & MACE_XMTFS_RTRY) {
1013	    /* Retry error: transmit aborted after 16 attempts */
1014	    lp->mace_stats.rtry++;
1015	  }
1016        } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */
1017
1018      } /* if (xmtfs & MACE_XMTFS_XMTSV) */
1019
1020      lp->linux_stats.tx_packets++;
1021      lp->tx_free_frames++;
1022      netif_wake_queue(dev);
1023    } /* if (status & MACE_IR_XMTINT) */
1024
1025    if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) {
1026      if (status & MACE_IR_JAB) {
1027        /* Jabber Error.  Excessive transmit duration (20-150ms). */
1028        lp->mace_stats.jab++;
1029      }
1030      if (status & MACE_IR_BABL) {
1031        /* Babble Error.  >1518 bytes transmitted. */
1032        lp->mace_stats.babl++;
1033      }
1034      if (status & MACE_IR_CERR) {
1035	/* Collision Error.  CERR indicates the absence of the
1036	   Signal Quality Error Test message after a packet
1037	   transmission. */
1038        lp->mace_stats.cerr++;
1039      }
1040      if (status & MACE_IR_RCVCCO) {
1041        /* Receive Collision Count Overflow; */
1042        lp->mace_stats.rcvcco++;
1043      }
1044      if (status & MACE_IR_RNTPCO) {
1045        /* Runt Packet Count Overflow */
1046        lp->mace_stats.rntpco++;
1047      }
1048      if (status & MACE_IR_MPCO) {
1049        /* Missed Packet Count Overflow */
1050        lp->mace_stats.mpco++;
1051      }
1052    } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */
1053
1054  } while ((status & ~MACE_IMR_DEFAULT) && (--IntrCnt));
1055
1056  return IRQ_HANDLED;
1057} /* mace_interrupt */
1058
1059/* ----------------------------------------------------------------------------
1060mace_rx
1061	Receives packets.
1062---------------------------------------------------------------------------- */
1063static int mace_rx(struct net_device *dev, unsigned char RxCnt)
1064{
1065  mace_private *lp = netdev_priv(dev);
1066  unsigned int ioaddr = dev->base_addr;
1067  unsigned char rx_framecnt;
1068  unsigned short rx_status;
1069
1070  while (
1071    ((rx_framecnt = inb(ioaddr + AM2150_RCV_FRAME_COUNT)) > 0) &&
1072    (rx_framecnt <= 12) && /* rx_framecnt==0xFF if card is extracted. */
1073    (RxCnt--)
1074  ) {
1075    rx_status = inw(ioaddr + AM2150_RCV);
1076
1077    pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status"
1078	  " 0x%X.\n", dev->name, rx_framecnt, rx_status);
1079
1080    if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */
1081      lp->linux_stats.rx_errors++;
1082      if (rx_status & MACE_RCVFS_OFLO) {
1083        lp->mace_stats.oflo++;
1084      }
1085      if (rx_status & MACE_RCVFS_CLSN) {
1086        lp->mace_stats.clsn++;
1087      }
1088      if (rx_status & MACE_RCVFS_FRAM) {
1089	lp->mace_stats.fram++;
1090      }
1091      if (rx_status & MACE_RCVFS_FCS) {
1092        lp->mace_stats.fcs++;
1093      }
1094    } else {
1095      short pkt_len = (rx_status & ~MACE_RCVFS_RCVSTS) - 4;
1096        /* Auto Strip is off, always subtract 4 */
1097      struct sk_buff *skb;
1098
1099      lp->mace_stats.rfs_rntpc += inb(ioaddr + AM2150_RCV);
1100        /* runt packet count */
1101      lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV);
1102        /* rcv collision count */
1103
1104      pr_debug("    receiving packet size 0x%X rx_status"
1105	    " 0x%X.\n", pkt_len, rx_status);
1106
1107      skb = netdev_alloc_skb(dev, pkt_len + 2);
1108
1109      if (skb != NULL) {
1110	skb_reserve(skb, 2);
1111	insw(ioaddr + AM2150_RCV, skb_put(skb, pkt_len), pkt_len>>1);
1112	if (pkt_len & 1)
1113	    *(skb_tail_pointer(skb) - 1) = inb(ioaddr + AM2150_RCV);
1114	skb->protocol = eth_type_trans(skb, dev);
1115	
1116	netif_rx(skb); /* Send the packet to the upper (protocol) layers. */
1117
1118	lp->linux_stats.rx_packets++;
1119	lp->linux_stats.rx_bytes += pkt_len;
1120	outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1121	continue;
1122      } else {
1123	pr_debug("%s: couldn't allocate a sk_buff of size"
1124	      " %d.\n", dev->name, pkt_len);
1125	lp->linux_stats.rx_dropped++;
1126      }
1127    }
1128    outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
1129  } /* while */
1130
1131  return 0;
1132} /* mace_rx */
1133
1134/* ----------------------------------------------------------------------------
1135pr_linux_stats
1136---------------------------------------------------------------------------- */
1137static void pr_linux_stats(struct net_device_stats *pstats)
1138{
1139  pr_debug("pr_linux_stats\n");
1140  pr_debug(" rx_packets=%-7ld        tx_packets=%ld\n",
1141	(long)pstats->rx_packets, (long)pstats->tx_packets);
1142  pr_debug(" rx_errors=%-7ld         tx_errors=%ld\n",
1143	(long)pstats->rx_errors, (long)pstats->tx_errors);
1144  pr_debug(" rx_dropped=%-7ld        tx_dropped=%ld\n",
1145	(long)pstats->rx_dropped, (long)pstats->tx_dropped);
1146  pr_debug(" multicast=%-7ld         collisions=%ld\n",
1147	(long)pstats->multicast, (long)pstats->collisions);
1148
1149  pr_debug(" rx_length_errors=%-7ld  rx_over_errors=%ld\n",
1150	(long)pstats->rx_length_errors, (long)pstats->rx_over_errors);
1151  pr_debug(" rx_crc_errors=%-7ld     rx_frame_errors=%ld\n",
1152	(long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors);
1153  pr_debug(" rx_fifo_errors=%-7ld    rx_missed_errors=%ld\n",
1154	(long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors);
1155
1156  pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
1157	(long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors);
1158  pr_debug(" tx_fifo_errors=%-7ld    tx_heartbeat_errors=%ld\n",
1159	(long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors);
1160  pr_debug(" tx_window_errors=%ld\n",
1161	(long)pstats->tx_window_errors);
1162} /* pr_linux_stats */
1163
1164/* ----------------------------------------------------------------------------
1165pr_mace_stats
1166---------------------------------------------------------------------------- */
1167static void pr_mace_stats(mace_statistics *pstats)
1168{
1169  pr_debug("pr_mace_stats\n");
1170
1171  pr_debug(" xmtsv=%-7d             uflo=%d\n",
1172	pstats->xmtsv, pstats->uflo);
1173  pr_debug(" lcol=%-7d              more=%d\n",
1174	pstats->lcol, pstats->more);
1175  pr_debug(" one=%-7d               defer=%d\n",
1176	pstats->one, pstats->defer);
1177  pr_debug(" lcar=%-7d              rtry=%d\n",
1178	pstats->lcar, pstats->rtry);
1179
1180  /* MACE_XMTRC */
1181  pr_debug(" exdef=%-7d             xmtrc=%d\n",
1182	pstats->exdef, pstats->xmtrc);
1183
1184  /* RFS1--Receive Status (RCVSTS) */
1185  pr_debug(" oflo=%-7d              clsn=%d\n",
1186	pstats->oflo, pstats->clsn);
1187  pr_debug(" fram=%-7d              fcs=%d\n",
1188	pstats->fram, pstats->fcs);
1189
1190  /* RFS2--Runt Packet Count (RNTPC) */
1191  /* RFS3--Receive Collision Count (RCVCC) */
1192  pr_debug(" rfs_rntpc=%-7d         rfs_rcvcc=%d\n",
1193	pstats->rfs_rntpc, pstats->rfs_rcvcc);
1194
1195  /* MACE_IR */
1196  pr_debug(" jab=%-7d               babl=%d\n",
1197	pstats->jab, pstats->babl);
1198  pr_debug(" cerr=%-7d              rcvcco=%d\n",
1199	pstats->cerr, pstats->rcvcco);
1200  pr_debug(" rntpco=%-7d            mpco=%d\n",
1201	pstats->rntpco, pstats->mpco);
1202
1203  /* MACE_MPC */
1204  pr_debug(" mpc=%d\n", pstats->mpc);
1205
1206  /* MACE_RNTPC */
1207  pr_debug(" rntpc=%d\n", pstats->rntpc);
1208
1209  /* MACE_RCVCC */
1210  pr_debug(" rcvcc=%d\n", pstats->rcvcc);
1211
1212} /* pr_mace_stats */
1213
1214/* ----------------------------------------------------------------------------
1215update_stats
1216	Update statistics.  We change to register window 1, so this
1217	should be run single-threaded if the device is active. This is
1218	expected to be a rare operation, and it's simpler for the rest
1219	of the driver to assume that window 0 is always valid rather
1220	than use a special window-state variable.
1221
1222	oflo & uflo should _never_ occur since it would mean the Xilinx
1223	was not able to transfer data between the MACE FIFO and the
1224	card's SRAM fast enough.  If this happens, something is
1225	seriously wrong with the hardware.
1226---------------------------------------------------------------------------- */
1227static void update_stats(unsigned int ioaddr, struct net_device *dev)
1228{
1229  mace_private *lp = netdev_priv(dev);
1230
1231  lp->mace_stats.rcvcc += mace_read(lp, ioaddr, MACE_RCVCC);
1232  lp->mace_stats.rntpc += mace_read(lp, ioaddr, MACE_RNTPC);
1233  lp->mace_stats.mpc += mace_read(lp, ioaddr, MACE_MPC);
1234  /* At this point, mace_stats is fully updated for this call.
1235     We may now update the linux_stats. */
1236
1237  /* The MACE has no equivalent for linux_stats field which are commented
1238     out. */
1239
1240  /* lp->linux_stats.multicast; */
1241  lp->linux_stats.collisions = 
1242    lp->mace_stats.rcvcco * 256 + lp->mace_stats.rcvcc;
1243    /* Collision: The MACE may retry sending a packet 15 times
1244       before giving up.  The retry count is in XMTRC.
1245       Does each retry constitute a collision?
1246       If so, why doesn't the RCVCC record these collisions? */
1247
1248  /* detailed rx_errors: */
1249  lp->linux_stats.rx_length_errors = 
1250    lp->mace_stats.rntpco * 256 + lp->mace_stats.rntpc;
1251  /* lp->linux_stats.rx_over_errors */
1252  lp->linux_stats.rx_crc_errors = lp->mace_stats.fcs;
1253  lp->linux_stats.rx_frame_errors = lp->mace_stats.fram;
1254  lp->linux_stats.rx_fifo_errors = lp->mace_stats.oflo;
1255  lp->linux_stats.rx_missed_errors = 
1256    lp->mace_stats.mpco * 256 + lp->mace_stats.mpc;
1257
1258  /* detailed tx_errors */
1259  lp->linux_stats.tx_aborted_errors = lp->mace_stats.rtry;
1260  lp->linux_stats.tx_carrier_errors = lp->mace_stats.lcar;
1261    /* LCAR usually results from bad cabling. */
1262  lp->linux_stats.tx_fifo_errors = lp->mace_stats.uflo;
1263  lp->linux_stats.tx_heartbeat_errors = lp->mace_stats.cerr;
1264  /* lp->linux_stats.tx_window_errors; */
1265} /* update_stats */
1266
1267/* ----------------------------------------------------------------------------
1268mace_get_stats
1269	Gathers ethernet statistics from the MACE chip.
1270---------------------------------------------------------------------------- */
1271static struct net_device_stats *mace_get_stats(struct net_device *dev)
1272{
1273  mace_private *lp = netdev_priv(dev);
1274
1275  update_stats(dev->base_addr, dev);
1276
1277  pr_debug("%s: updating the statistics.\n", dev->name);
1278  pr_linux_stats(&lp->linux_stats);
1279  pr_mace_stats(&lp->mace_stats);
1280
1281  return &lp->linux_stats;
1282} /* net_device_stats */
1283
1284/* ----------------------------------------------------------------------------
1285updateCRC
1286	Modified from Am79C90 data sheet.
1287---------------------------------------------------------------------------- */
1288
1289#ifdef BROKEN_MULTICAST
1290
1291static void updateCRC(int *CRC, int bit)
1292{
1293  static const int poly[]={
1294    1,1,1,0, 1,1,0,1,
1295    1,0,1,1, 1,0,0,0,
1296    1,0,0,0, 0,0,1,1,
1297    0,0,1,0, 0,0,0,0
1298  }; /* CRC polynomial.  poly[n] = coefficient of the x**n term of the
1299	CRC generator polynomial. */
1300
1301  int j;
1302
1303  /* shift CRC and control bit (CRC[32]) */
1304  for (j = 32; j > 0; j--)
1305    CRC[j] = CRC[j-1];
1306  CRC[0] = 0;
1307
1308  /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */
1309  if (bit ^ CRC[32])
1310    for (j = 0; j < 32; j++)
1311      CRC[j] ^= poly[j];
1312} /* updateCRC */
1313
1314/* ----------------------------------------------------------------------------
1315BuildLAF
1316	Build logical address filter.
1317	Modified from Am79C90 data sheet.
1318
1319Input
1320	ladrf: logical address filter (contents initialized to 0)
1321	adr: ethernet address
1322---------------------------------------------------------------------------- */
1323static void BuildLAF(int *ladrf, int *adr)
1324{
1325  int CRC[33]={1}; /* CRC register, 1 word/bit + extra control bit */
1326
1327  int i, byte; /* temporary array indices */
1328  int hashcode; /* the output object */
1329
1330  CRC[32]=0;
1331
1332  for (byte = 0; byte < 6; byte++)
1333    for (i = 0; i < 8; i++)
1334      updateCRC(CRC, (adr[byte] >> i) & 1);
1335
1336  hashcode = 0;
1337  for (i = 0; i < 6; i++)
1338    hashcode = (hashcode << 1) + CRC[i];
1339
1340  byte = hashcode >> 3;
1341  ladrf[byte] |= (1 << (hashcode & 7));
1342
1343#ifdef PCMCIA_DEBUG
1344  if (0)
1345    printk(KERN_DEBUG "    adr =%pM\n", adr);
1346  printk(KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63] =", hashcode);
1347  for (i = 0; i < 8; i++)
1348    pr_cont(" %02X", ladrf[i]);
1349  pr_cont("\n");
1350#endif
1351} /* BuildLAF */
1352
1353/* ----------------------------------------------------------------------------
1354restore_multicast_list
1355	Restores the multicast filter for MACE chip to the last
1356	set_multicast_list() call.
1357
1358Input
1359	multicast_num_addrs
1360	multicast_ladrf[]
1361---------------------------------------------------------------------------- */
1362static void restore_multicast_list(struct net_device *dev)
1363{
1364  mace_private *lp = netdev_priv(dev);
1365  int num_addrs = lp->multicast_num_addrs;
1366  int *ladrf = lp->multicast_ladrf;
1367  unsigned int ioaddr = dev->base_addr;
1368  int i;
1369
1370  pr_debug("%s: restoring Rx mode to %d addresses.\n",
1371	dev->name, num_addrs);
1372
1373  if (num_addrs > 0) {
1374
1375    pr_debug("Attempt to restore multicast list detected.\n");
1376
1377    mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR);
1378    /* Poll ADDRCHG bit */
1379    while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG)
1380      ;
1381    /* Set LADRF register */
1382    for (i = 0; i < MACE_LADRF_LEN; i++)
1383      mace_write(lp, ioaddr, MACE_LADRF, ladrf[i]);
1384
1385    mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_RCVFCSE | MACE_UTR_LOOP_EXTERNAL);
1386    mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1387
1388  } else if (num_addrs < 0) {
1389
1390    /* Promiscuous mode: receive all packets */
1391    mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1392    mace_write(lp, ioaddr, MACE_MACCC,
1393      MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1394    );
1395
1396  } else {
1397
1398    /* Normal mode */
1399    mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1400    mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1401
1402  }
1403} /* restore_multicast_list */
1404
1405/* ----------------------------------------------------------------------------
1406set_multicast_list
1407	Set or clear the multicast filter for this adaptor.
1408
1409Input
1410	num_addrs == -1	Promiscuous mode, receive all packets
1411	num_addrs == 0	Normal mode, clear multicast list
1412	num_addrs > 0	Multicast mode, receive normal and MC packets, and do
1413			best-effort filtering.
1414Output
1415	multicast_num_addrs
1416	multicast_ladrf[]
1417---------------------------------------------------------------------------- */
1418
1419static void set_multicast_list(struct net_device *dev)
1420{
1421  mace_private *lp = netdev_priv(dev);
1422  int adr[ETH_ALEN] = {0}; /* Ethernet address */
1423  struct netdev_hw_addr *ha;
1424
1425#ifdef PCMCIA_DEBUG
1426  {
1427    static int old;
1428    if (netdev_mc_count(dev) != old) {
1429      old = netdev_mc_count(dev);
1430      pr_debug("%s: setting Rx mode to %d addresses.\n",
1431	    dev->name, old);
1432    }
1433  }
1434#endif
1435
1436  /* Set multicast_num_addrs. */
1437  lp->multicast_num_addrs = netdev_mc_count(dev);
1438
1439  /* Set multicast_ladrf. */
1440  if (num_addrs > 0) {
1441    /* Calculate multicast logical address filter */
1442    memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
1443    netdev_for_each_mc_addr(ha, dev) {
1444      memcpy(adr, ha->addr, ETH_ALEN);
1445      BuildLAF(lp->multicast_ladrf, adr);
1446    }
1447  }
1448
1449  restore_multicast_list(dev);
1450
1451} /* set_multicast_list */
1452
1453#endif /* BROKEN_MULTICAST */
1454
1455static void restore_multicast_list(struct net_device *dev)
1456{
1457  unsigned int ioaddr = dev->base_addr;
1458  mace_private *lp = netdev_priv(dev);
1459
1460  pr_debug("%s: restoring Rx mode to %d addresses.\n", dev->name,
1461	lp->multicast_num_addrs);
1462
1463  if (dev->flags & IFF_PROMISC) {
1464    /* Promiscuous mode: receive all packets */
1465    mace_write(lp,ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1466    mace_write(lp, ioaddr, MACE_MACCC,
1467      MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV
1468    );
1469  } else {
1470    /* Normal mode */
1471    mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL);
1472    mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV);
1473  }
1474} /* restore_multicast_list */
1475
1476static void set_multicast_list(struct net_device *dev)
1477{
1478  mace_private *lp = netdev_priv(dev);
1479
1480#ifdef PCMCIA_DEBUG
1481  {
1482    static int old;
1483    if (netdev_mc_count(dev) != old) {
1484      old = netdev_mc_count(dev);
1485      pr_debug("%s: setting Rx mode to %d addresses.\n",
1486	    dev->name, old);
1487    }
1488  }
1489#endif
1490
1491  lp->multicast_num_addrs = netdev_mc_count(dev);
1492  restore_multicast_list(dev);
1493
1494} /* set_multicast_list */
1495
1496static const struct pcmcia_device_id nmclan_ids[] = {
1497	PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
1498	PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
1499	PCMCIA_DEVICE_NULL,
1500};
1501MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
1502
1503static struct pcmcia_driver nmclan_cs_driver = {
1504	.owner		= THIS_MODULE,
1505	.name		= "nmclan_cs",
1506	.probe		= nmclan_probe,
1507	.remove		= nmclan_detach,
1508	.id_table       = nmclan_ids,
1509	.suspend	= nmclan_suspend,
1510	.resume		= nmclan_resume,
1511};
1512module_pcmcia_driver(nmclan_cs_driver);