Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Touchscreen driver configuration
4#
5menuconfig INPUT_TOUCHSCREEN
6 bool "Touchscreens"
7 help
8 Say Y here, and a list of supported touchscreens will be displayed.
9 This option doesn't affect the kernel.
10
11 If unsure, say Y.
12
13if INPUT_TOUCHSCREEN
14
15config TOUCHSCREEN_88PM860X
16 tristate "Marvell 88PM860x touchscreen"
17 depends on MFD_88PM860X
18 help
19 Say Y here if you have a 88PM860x PMIC and want to enable
20 support for the built-in touchscreen.
21
22 If unsure, say N.
23
24 To compile this driver as a module, choose M here: the
25 module will be called 88pm860x-ts.
26
27config TOUCHSCREEN_ADS7846
28 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
29 depends on SPI_MASTER
30 depends on HWMON = n || HWMON
31 help
32 Say Y here if you have a touchscreen interface using the
33 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
34 and your board-specific setup code includes that in its
35 table of SPI devices.
36
37 If HWMON is selected, and the driver is told the reference voltage
38 on your board, you will also get hwmon interfaces for the voltage
39 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
40
41 If unsure, say N (but it's safe to say "Y").
42
43 To compile this driver as a module, choose M here: the
44 module will be called ads7846.
45
46config TOUCHSCREEN_AD7877
47 tristate "AD7877 based touchscreens"
48 depends on SPI_MASTER
49 help
50 Say Y here if you have a touchscreen interface using the
51 AD7877 controller, and your board-specific initialization
52 code includes that in its table of SPI devices.
53
54 If unsure, say N (but it's safe to say "Y").
55
56 To compile this driver as a module, choose M here: the
57 module will be called ad7877.
58
59config TOUCHSCREEN_AD7879
60 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
61 help
62 Say Y here if you want to support a touchscreen interface using
63 the AD7879-1/AD7889-1 controller.
64
65 You should select a bus connection too.
66
67 To compile this driver as a module, choose M here: the
68 module will be called ad7879.
69
70config TOUCHSCREEN_AD7879_I2C
71 tristate "support I2C bus connection"
72 depends on TOUCHSCREEN_AD7879 && I2C
73 select REGMAP_I2C
74 help
75 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
76
77 To compile this driver as a module, choose M here: the
78 module will be called ad7879-i2c.
79
80config TOUCHSCREEN_AD7879_SPI
81 tristate "support SPI bus connection"
82 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
83 select REGMAP_SPI
84 help
85 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
86
87 If unsure, say N (but it's safe to say "Y").
88
89 To compile this driver as a module, choose M here: the
90 module will be called ad7879-spi.
91
92config TOUCHSCREEN_ADC
93 tristate "Generic ADC based resistive touchscreen"
94 depends on IIO
95 select IIO_BUFFER
96 select IIO_BUFFER_CB
97 help
98 Say Y here if you want to use the generic ADC
99 resistive touchscreen driver.
100
101 If unsure, say N (but it's safe to say "Y").
102
103 To compile this driver as a module, choose M here: the
104 module will be called resistive-adc-touch.ko.
105
106config TOUCHSCREEN_AR1021_I2C
107 tristate "Microchip AR1020/1021 i2c touchscreen"
108 depends on I2C && OF
109 help
110 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
111 controller chip in your system.
112
113 If unsure, say N.
114
115 To compile this driver as a module, choose M here: the
116 module will be called ar1021_i2c.
117
118config TOUCHSCREEN_ATMEL_MXT
119 tristate "Atmel mXT I2C Touchscreen"
120 depends on I2C
121 select FW_LOADER
122 help
123 Say Y here if you have Atmel mXT series I2C touchscreen,
124 such as AT42QT602240/ATMXT224, connected to your system.
125
126 If unsure, say N.
127
128 To compile this driver as a module, choose M here: the
129 module will be called atmel_mxt_ts.
130
131config TOUCHSCREEN_ATMEL_MXT_T37
132 bool "Support T37 Diagnostic Data"
133 depends on TOUCHSCREEN_ATMEL_MXT
134 depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
135 select VIDEOBUF2_VMALLOC
136 help
137 Say Y here if you want support to output data from the T37
138 Diagnostic Data object using a V4L device.
139
140config TOUCHSCREEN_AUO_PIXCIR
141 tristate "AUO in-cell touchscreen using Pixcir ICs"
142 depends on I2C
143 depends on GPIOLIB || COMPILE_TEST
144 help
145 Say Y here if you have a AUO display with in-cell touchscreen
146 using Pixcir ICs.
147
148 If unsure, say N.
149
150 To compile this driver as a module, choose M here: the
151 module will be called auo-pixcir-ts.
152
153config TOUCHSCREEN_BU21013
154 tristate "BU21013 based touch panel controllers"
155 depends on I2C
156 help
157 Say Y here if you have a bu21013 touchscreen connected to
158 your system.
159
160 If unsure, say N.
161
162 To compile this driver as a module, choose M here: the
163 module will be called bu21013_ts.
164
165config TOUCHSCREEN_BU21029
166 tristate "Rohm BU21029 based touch panel controllers"
167 depends on I2C
168 help
169 Say Y here if you have a Rohm BU21029 touchscreen controller
170 connected to your system.
171
172 If unsure, say N.
173
174 To compile this driver as a module, choose M here: the
175 module will be called bu21029_ts.
176
177config TOUCHSCREEN_CHIPONE_ICN8318
178 tristate "chipone icn8318 touchscreen controller"
179 depends on GPIOLIB || COMPILE_TEST
180 depends on I2C
181 depends on OF
182 help
183 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
184
185 If unsure, say N.
186
187 To compile this driver as a module, choose M here: the
188 module will be called chipone_icn8318.
189
190config TOUCHSCREEN_CHIPONE_ICN8505
191 tristate "chipone icn8505 touchscreen controller"
192 depends on I2C && ACPI
193 help
194 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
195
196 If unsure, say N.
197
198 To compile this driver as a module, choose M here: the
199 module will be called chipone_icn8505.
200
201config TOUCHSCREEN_CY8CTMA140
202 tristate "cy8ctma140 touchscreen"
203 depends on I2C
204 help
205 Say Y here if you have a Cypress CY8CTMA140 capacitive
206 touchscreen also just known as "TMA140"
207
208 If unsure, say N.
209
210 To compile this driver as a module, choose M here: the
211 module will be called cy8ctma140.
212
213config TOUCHSCREEN_CY8CTMG110
214 tristate "cy8ctmg110 touchscreen"
215 depends on I2C
216 depends on GPIOLIB || COMPILE_TEST
217 help
218 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
219 an AAVA device.
220
221 If unsure, say N.
222
223 To compile this driver as a module, choose M here: the
224 module will be called cy8ctmg110_ts.
225
226config TOUCHSCREEN_CYTTSP_CORE
227 tristate "Cypress TTSP touchscreen"
228 help
229 Say Y here if you have a touchscreen using controller from
230 the Cypress TrueTouch(tm) Standard Product family connected
231 to your system. You will also need to select appropriate
232 bus connection below.
233
234 If unsure, say N.
235
236 To compile this driver as a module, choose M here: the
237 module will be called cyttsp_core.
238
239config TOUCHSCREEN_CYTTSP_I2C
240 tristate "support I2C bus connection"
241 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
242 help
243 Say Y here if the touchscreen is connected via I2C bus.
244
245 To compile this driver as a module, choose M here: the
246 module will be called cyttsp_i2c.
247
248config TOUCHSCREEN_CYTTSP_SPI
249 tristate "support SPI bus connection"
250 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
251 help
252 Say Y here if the touchscreen is connected via SPI bus.
253
254 To compile this driver as a module, choose M here: the
255 module will be called cyttsp_spi.
256
257config TOUCHSCREEN_CYTTSP5
258 tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
259 depends on I2C
260 select REGMAP_I2C
261 select CRC_ITU_T
262 help
263 Driver for Parade TrueTouch Standard Product Generation 5
264 touchscreen controllers. I2C bus interface support only.
265
266 Say Y here if you have a Cypress Gen5 touchscreen.
267
268 If unsure, say N.
269
270 To compile this driver as a module, choose M here: the
271 module will be called cyttsp5.
272
273config TOUCHSCREEN_DA9034
274 tristate "Touchscreen support for Dialog Semiconductor DA9034"
275 depends on PMIC_DA903X
276 default y
277 help
278 Say Y here to enable the support for the touchscreen found
279 on Dialog Semiconductor DA9034 PMIC.
280
281 If unsure, say N.
282
283 To compile this driver as a module, choose M here: the
284 module will be called da9034-ts.
285
286config TOUCHSCREEN_DA9052
287 tristate "Dialog DA9052/DA9053 TSI"
288 depends on PMIC_DA9052
289 help
290 Say Y here to support the touchscreen found on Dialog Semiconductor
291 DA9052-BC and DA9053-AA/Bx PMICs.
292
293 If unsure, say N.
294
295 To compile this driver as a module, choose M here: the
296 module will be called da9052_tsi.
297
298config TOUCHSCREEN_DYNAPRO
299 tristate "Dynapro serial touchscreen"
300 select SERIO
301 help
302 Say Y here if you have a Dynapro serial touchscreen connected to
303 your system.
304
305 If unsure, say N.
306
307 To compile this driver as a module, choose M here: the
308 module will be called dynapro.
309
310config TOUCHSCREEN_HAMPSHIRE
311 tristate "Hampshire serial touchscreen"
312 select SERIO
313 help
314 Say Y here if you have a Hampshire serial touchscreen connected to
315 your system.
316
317 If unsure, say N.
318
319 To compile this driver as a module, choose M here: the
320 module will be called hampshire.
321
322config TOUCHSCREEN_EETI
323 tristate "EETI touchscreen panel support"
324 depends on I2C
325 help
326 Say Y here to enable support for I2C connected EETI touch panels.
327
328 To compile this driver as a module, choose M here: the
329 module will be called eeti_ts.
330
331config TOUCHSCREEN_EGALAX
332 tristate "EETI eGalax multi-touch panel support"
333 depends on I2C && OF
334 help
335 Say Y here to enable support for I2C connected EETI
336 eGalax multi-touch panels.
337
338 To compile this driver as a module, choose M here: the
339 module will be called egalax_ts.
340
341config TOUCHSCREEN_EGALAX_SERIAL
342 tristate "EETI eGalax serial touchscreen"
343 select SERIO
344 help
345 Say Y here to enable support for serial connected EETI
346 eGalax touch panels.
347
348 To compile this driver as a module, choose M here: the
349 module will be called egalax_ts_serial.
350
351config TOUCHSCREEN_EXC3000
352 tristate "EETI EXC3000 multi-touch panel support"
353 depends on I2C
354 help
355 Say Y here to enable support for I2C connected EETI
356 EXC3000 multi-touch panels.
357
358 To compile this driver as a module, choose M here: the
359 module will be called exc3000.
360
361config TOUCHSCREEN_FUJITSU
362 tristate "Fujitsu serial touchscreen"
363 select SERIO
364 help
365 Say Y here if you have the Fujitsu touchscreen (such as one
366 installed in Lifebook P series laptop) connected to your
367 system.
368
369 If unsure, say N.
370
371 To compile this driver as a module, choose M here: the
372 module will be called fujitsu-ts.
373
374config TOUCHSCREEN_GOODIX
375 tristate "Goodix I2C touchscreen"
376 depends on I2C
377 depends on GPIOLIB || COMPILE_TEST
378 help
379 Say Y here if you have the Goodix touchscreen (such as one
380 installed in Onda v975w tablets) connected to your
381 system. It also supports 5-finger chip models, which can be
382 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
383
384 If unsure, say N.
385
386 To compile this driver as a module, choose M here: the
387 module will be called goodix.
388
389config TOUCHSCREEN_GOODIX_BERLIN_CORE
390 tristate
391
392config TOUCHSCREEN_GOODIX_BERLIN_I2C
393 tristate "Goodix Berlin I2C touchscreen"
394 depends on I2C
395 select REGMAP_I2C
396 select TOUCHSCREEN_GOODIX_BERLIN_CORE
397 help
398 Say Y here if you have a Goodix Berlin IC connected to
399 your system via I2C.
400
401 If unsure, say N.
402
403 To compile this driver as a module, choose M here: the
404 module will be called goodix_berlin_i2c.
405
406config TOUCHSCREEN_GOODIX_BERLIN_SPI
407 tristate "Goodix Berlin SPI touchscreen"
408 depends on SPI_MASTER
409 select REGMAP
410 select TOUCHSCREEN_GOODIX_BERLIN_CORE
411 help
412 Say Y here if you have a Goodix Berlin IC connected to
413 your system via SPI.
414
415 If unsure, say N.
416
417 To compile this driver as a module, choose M here: the
418 module will be called goodix_berlin_spi.
419
420config TOUCHSCREEN_HIDEEP
421 tristate "HiDeep Touch IC"
422 depends on I2C
423 select REGMAP_I2C
424 help
425 Say Y here if you have a touchscreen using HiDeep.
426
427 If unsure, say N.
428
429 To compile this driver as a module, choose M here : the
430 module will be called hideep_ts.
431
432config TOUCHSCREEN_HYCON_HY46XX
433 tristate "Hycon hy46xx touchscreen support"
434 depends on I2C
435 select REGMAP_I2C
436 help
437 Say Y here if you have a touchscreen using Hycon hy46xx
438
439 If unsure, say N.
440
441 To compile this driver as a module, choose M here: the
442 module will be called hycon-hy46xx.
443
444config TOUCHSCREEN_HYNITRON_CSTXXX
445 tristate "Hynitron touchscreen support"
446 depends on I2C
447 help
448 Say Y here if you have a touchscreen using a Hynitron
449 touchscreen controller.
450
451 If unsure, say N.
452
453 To compile this driver as a module, choose M here: the
454 module will be called hynitron-cstxxx.
455
456config TOUCHSCREEN_ILI210X
457 tristate "Ilitek ILI210X based touchscreen"
458 depends on I2C
459 select CRC_CCITT
460 help
461 Say Y here if you have a ILI210X based touchscreen
462 controller. This driver supports models ILI2102,
463 ILI2102s, ILI2103, ILI2103s and ILI2105.
464 Such kind of chipsets can be found in Amazon Kindle Fire
465 touchscreens.
466
467 If unsure, say N.
468
469 To compile this driver as a module, choose M here: the
470 module will be called ili210x.
471
472config TOUCHSCREEN_ILITEK
473 tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
474 depends on I2C
475 help
476 Say Y here if you have touchscreen with ILITEK touch IC,
477 it supports 213X/23XX/25XX and other Lego series.
478
479 If unsure, say N.
480
481 To compile this driver as a module, choose M here: the
482 module will be called ilitek_ts_i2c.
483
484config TOUCHSCREEN_IPROC
485 tristate "IPROC touch panel driver support"
486 depends on ARCH_BCM_IPROC || COMPILE_TEST
487 help
488 Say Y here if you want to add support for the IPROC touch
489 controller to your system.
490
491 If unsure, say N.
492
493 To compile this driver as a module, choose M here: the
494 module will be called bcm_iproc_tsc.
495
496config TOUCHSCREEN_S6SY761
497 tristate "Samsung S6SY761 Touchscreen driver"
498 depends on I2C
499 help
500 Say Y if you have the Samsung S6SY761 driver
501
502 If unsure, say N
503
504 To compile this driver as module, choose M here: the
505 module will be called s6sy761.
506
507config TOUCHSCREEN_GUNZE
508 tristate "Gunze AHL-51S touchscreen"
509 select SERIO
510 help
511 Say Y here if you have the Gunze AHL-51 touchscreen connected to
512 your system.
513
514 If unsure, say N.
515
516 To compile this driver as a module, choose M here: the
517 module will be called gunze.
518
519config TOUCHSCREEN_EKTF2127
520 tristate "Elan eKTF2127 I2C touchscreen"
521 depends on I2C
522 help
523 Say Y here if you have an Elan eKTF2127 touchscreen
524 connected to your system.
525
526 If unsure, say N.
527
528 To compile this driver as a module, choose M here: the
529 module will be called ektf2127.
530
531config TOUCHSCREEN_ELAN
532 tristate "Elan eKTH I2C touchscreen"
533 depends on I2C
534 help
535 Say Y here if you have an Elan eKTH I2C touchscreen
536 connected to your system.
537
538 If unsure, say N.
539
540 To compile this driver as a module, choose M here: the
541 module will be called elants_i2c.
542
543config TOUCHSCREEN_ELO
544 tristate "Elo serial touchscreens"
545 select SERIO
546 help
547 Say Y here if you have an Elo serial touchscreen connected to
548 your system.
549
550 If unsure, say N.
551
552 To compile this driver as a module, choose M here: the
553 module will be called elo.
554
555config TOUCHSCREEN_WACOM_W8001
556 tristate "Wacom W8001 penabled serial touchscreen"
557 select SERIO
558 help
559 Say Y here if you have an Wacom W8001 penabled serial touchscreen
560 connected to your system.
561
562 If unsure, say N.
563
564 To compile this driver as a module, choose M here: the
565 module will be called wacom_w8001.
566
567config TOUCHSCREEN_WACOM_I2C
568 tristate "Wacom Tablet support (I2C)"
569 depends on I2C
570 help
571 Say Y here if you want to use the I2C version of the Wacom
572 Pen Tablet.
573
574 If unsure, say N.
575
576 To compile this driver as a module, choose M here: the module
577 will be called wacom_i2c.
578
579config TOUCHSCREEN_LPC32XX
580 tristate "LPC32XX touchscreen controller"
581 depends on ARCH_LPC32XX
582 help
583 Say Y here if you have a LPC32XX device and want
584 to support the built-in touchscreen.
585
586 To compile this driver as a module, choose M here: the
587 module will be called lpc32xx_ts.
588
589config TOUCHSCREEN_MAX11801
590 tristate "MAX11801 based touchscreens"
591 depends on I2C
592 help
593 Say Y here if you have a MAX11801 based touchscreen
594 controller.
595
596 If unsure, say N.
597
598 To compile this driver as a module, choose M here: the
599 module will be called max11801_ts.
600
601config TOUCHSCREEN_MMS114
602 tristate "MELFAS MMS114 touchscreen"
603 depends on I2C
604 help
605 Say Y here if you have the MELFAS MMS114 touchscreen controller
606 chip in your system.
607
608 If unsure, say N.
609
610 To compile this driver as a module, choose M here: the
611 module will be called mms114.
612
613config TOUCHSCREEN_MELFAS_MIP4
614 tristate "MELFAS MIP4 Touchscreen"
615 depends on I2C
616 help
617 Say Y here if you have a MELFAS MIP4 Touchscreen device.
618
619 If unsure, say N.
620
621 To compile this driver as a module, choose M here:
622 the module will be called melfas_mip4.
623
624config TOUCHSCREEN_MSG2638
625 tristate "MStar msg2638 touchscreen support"
626 depends on I2C
627 depends on GPIOLIB || COMPILE_TEST
628 help
629 Say Y here if you have an I2C touchscreen using MStar msg2638.
630
631 If unsure, say N.
632
633 To compile this driver as a module, choose M here: the
634 module will be called msg2638.
635
636config TOUCHSCREEN_MTOUCH
637 tristate "MicroTouch serial touchscreens"
638 select SERIO
639 help
640 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
641 your system.
642
643 If unsure, say N.
644
645 To compile this driver as a module, choose M here: the
646 module will be called mtouch.
647
648config TOUCHSCREEN_NOVATEK_NVT_TS
649 tristate "Novatek NT11205 touchscreen support"
650 depends on I2C
651 help
652 Say Y here if you have a Novatek NT11205 touchscreen.
653 If unsure, say N.
654
655 To compile this driver as a module, choose M here: the
656 module will be called novatek-nvt-ts.
657
658config TOUCHSCREEN_IMAGIS
659 tristate "Imagis touchscreen support"
660 depends on I2C
661 help
662 Say Y here if you have an Imagis IST30xxC touchscreen.
663 If unsure, say N.
664
665 To compile this driver as a module, choose M here: the
666 module will be called imagis.
667
668config TOUCHSCREEN_IMX6UL_TSC
669 tristate "Freescale i.MX6UL touchscreen controller"
670 depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
671 help
672 Say Y here if you have a Freescale i.MX6UL, and want to
673 use the internal touchscreen controller.
674
675 If unsure, say N.
676
677 To compile this driver as a module, choose M here: the
678 module will be called imx6ul_tsc.
679
680config TOUCHSCREEN_INEXIO
681 tristate "iNexio serial touchscreens"
682 select SERIO
683 help
684 Say Y here if you have an iNexio serial touchscreen connected to
685 your system.
686
687 If unsure, say N.
688
689 To compile this driver as a module, choose M here: the
690 module will be called inexio.
691
692config TOUCHSCREEN_MK712
693 tristate "ICS MicroClock MK712 touchscreen"
694 depends on ISA
695 help
696 Say Y here if you have the ICS MicroClock MK712 touchscreen
697 controller chip in your system.
698
699 If unsure, say N.
700
701 To compile this driver as a module, choose M here: the
702 module will be called mk712.
703
704config TOUCHSCREEN_HP600
705 tristate "HP Jornada 6xx touchscreen"
706 depends on SH_HP6XX && SH_ADC
707 help
708 Say Y here if you have a HP Jornada 620/660/680/690 and want to
709 support the built-in touchscreen.
710
711 To compile this driver as a module, choose M here: the
712 module will be called hp680_ts_input.
713
714config TOUCHSCREEN_HP7XX
715 tristate "HP Jornada 7xx touchscreen"
716 depends on SA1100_JORNADA720_SSP
717 help
718 Say Y here if you have a HP Jornada 710/720/728 and want
719 to support the built-in touchscreen.
720
721 To compile this driver as a module, choose M here: the
722 module will be called jornada720_ts.
723
724config TOUCHSCREEN_IPAQ_MICRO
725 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
726 depends on MFD_IPAQ_MICRO
727 help
728 Say Y here to enable support for the touchscreen attached to
729 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
730
731 If unsure, say N.
732
733 To compile this driver as a module, choose M here: the
734 module will be called ipaq-micro-ts.
735
736config TOUCHSCREEN_HTCPEN
737 tristate "HTC Shift X9500 touchscreen"
738 depends on ISA
739 help
740 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
741 Clio / Shangrila and want to support the built-in touchscreen.
742
743 If unsure, say N.
744
745 To compile this driver as a module, choose M here: the
746 module will be called htcpen.
747
748config TOUCHSCREEN_PENMOUNT
749 tristate "Penmount serial touchscreen"
750 select SERIO
751 help
752 Say Y here if you have a Penmount serial touchscreen connected to
753 your system.
754
755 If unsure, say N.
756
757 To compile this driver as a module, choose M here: the
758 module will be called penmount.
759
760config TOUCHSCREEN_EDT_FT5X06
761 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
762 depends on I2C
763 select REGMAP_I2C
764 help
765 Say Y here if you have an EDT "Polytouch" touchscreen based
766 on the FocalTech FT5x06 family of controllers connected to
767 your system.
768
769 If unsure, say N.
770
771 To compile this driver as a module, choose M here: the
772 module will be called edt-ft5x06.
773
774config TOUCHSCREEN_RASPBERRYPI_FW
775 tristate "Raspberry Pi's firmware base touch screen support"
776 depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
777 help
778 Say Y here if you have the official Raspberry Pi 7 inch screen on
779 your system.
780
781 If unsure, say N.
782
783 To compile this driver as a module, choose M here: the
784 module will be called raspberrypi-ts.
785
786config TOUCHSCREEN_MIGOR
787 tristate "Renesas MIGO-R touchscreen"
788 depends on (SH_MIGOR || COMPILE_TEST) && I2C
789 help
790 Say Y here to enable MIGO-R touchscreen support.
791
792 If unsure, say N.
793
794 To compile this driver as a module, choose M here: the
795 module will be called migor_ts.
796
797config TOUCHSCREEN_TOUCHRIGHT
798 tristate "Touchright serial touchscreen"
799 select SERIO
800 help
801 Say Y here if you have a Touchright serial touchscreen connected to
802 your system.
803
804 If unsure, say N.
805
806 To compile this driver as a module, choose M here: the
807 module will be called touchright.
808
809config TOUCHSCREEN_TOUCHWIN
810 tristate "Touchwin serial touchscreen"
811 select SERIO
812 help
813 Say Y here if you have a Touchwin serial touchscreen connected to
814 your system.
815
816 If unsure, say N.
817
818 To compile this driver as a module, choose M here: the
819 module will be called touchwin.
820
821config TOUCHSCREEN_TI_AM335X_TSC
822 tristate "TI Touchscreen Interface"
823 depends on MFD_TI_AM335X_TSCADC
824 help
825 Say Y here if you have 4/5/8 wire touchscreen controller
826 to be connected to the ADC controller on your TI AM335x SoC.
827
828 If unsure, say N.
829
830 To compile this driver as a module, choose M here: the
831 module will be called ti_am335x_tsc.
832
833config TOUCHSCREEN_PIXCIR
834 tristate "PIXCIR I2C touchscreens"
835 depends on I2C
836 help
837 Say Y here if you have a pixcir i2c touchscreen
838 controller.
839
840 If unsure, say N.
841
842 To compile this driver as a module, choose M here: the
843 module will be called pixcir_i2c_ts.
844
845config TOUCHSCREEN_WDT87XX_I2C
846 tristate "Weida HiTech I2C touchscreen"
847 depends on I2C
848 help
849 Say Y here if you have a Weida WDT87XX I2C touchscreen
850 connected to your system.
851
852 If unsure, say N.
853
854 To compile this driver as a module, choose M here: the
855 module will be called wdt87xx_i2c.
856
857config TOUCHSCREEN_WM831X
858 tristate "Support for WM831x touchscreen controllers"
859 depends on MFD_WM831X
860 help
861 This enables support for the touchscreen controller on the WM831x
862 series of PMICs.
863
864 To compile this driver as a module, choose M here: the
865 module will be called wm831x-ts.
866
867config TOUCHSCREEN_WM97XX
868 tristate "Support for WM97xx AC97 touchscreen controllers"
869 depends on AC97_BUS || AC97_BUS_NEW
870 help
871 Say Y here if you have a Wolfson Microelectronics WM97xx
872 touchscreen connected to your system. Note that this option
873 only enables core driver, you will also need to select
874 support for appropriate chip below.
875
876 If unsure, say N.
877
878 To compile this driver as a module, choose M here: the
879 module will be called wm97xx-ts.
880
881config TOUCHSCREEN_WM9705
882 bool "WM9705 Touchscreen interface support"
883 depends on TOUCHSCREEN_WM97XX
884 default y
885 help
886 Say Y here to enable support for the Wolfson Microelectronics
887 WM9705 touchscreen controller.
888
889config TOUCHSCREEN_WM9712
890 bool "WM9712 Touchscreen interface support"
891 depends on TOUCHSCREEN_WM97XX
892 default y
893 help
894 Say Y here to enable support for the Wolfson Microelectronics
895 WM9712 touchscreen controller.
896
897config TOUCHSCREEN_WM9713
898 bool "WM9713 Touchscreen interface support"
899 depends on TOUCHSCREEN_WM97XX
900 default y
901 help
902 Say Y here to enable support for the Wolfson Microelectronics
903 WM9713 touchscreen controller.
904
905config TOUCHSCREEN_WM97XX_MAINSTONE
906 tristate "WM97xx Mainstone/Palm accelerated touch"
907 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
908 depends on SND_PXA2XX_LIB_AC97
909 help
910 Say Y here for support for streaming mode with WM97xx touchscreens
911 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
912
913 If unsure, say N.
914
915 To compile this driver as a module, choose M here: the
916 module will be called mainstone-wm97xx.
917
918config TOUCHSCREEN_USB_COMPOSITE
919 tristate "USB Touchscreen Driver"
920 depends on USB_ARCH_HAS_HCD
921 select USB
922 help
923 USB Touchscreen driver for:
924 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
925 - PanJit TouchSet USB
926 - 3M MicroTouch USB (EX II series)
927 - ITM
928 - some other eTurboTouch
929 - Gunze AHL61
930 - DMC TSC-10/25
931 - IRTOUCHSYSTEMS/UNITOP
932 - IdealTEK URTC1000
933 - GoTop Super_Q2/GogoPen/PenPower tablets
934 - JASTEC USB Touch Controller/DigiTech DTR-02U
935 - Zytronic controllers
936 - Elo TouchSystems 2700 IntelliTouch
937 - EasyTouch USB Touch Controller from Data Module
938 - e2i (Mimo monitors)
939
940 Have a look at <http://linux.chapter7.ch/touchkit/> for
941 a usage description and the required user-space stuff.
942
943 To compile this driver as a module, choose M here: the
944 module will be called usbtouchscreen.
945
946config TOUCHSCREEN_MXS_LRADC
947 tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
948 depends on MFD_MXS_LRADC
949 help
950 Say Y here if you have a touchscreen connected to the low-resolution
951 analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
952
953 To compile this driver as a module, choose M here: the module will be
954 called mxs-lradc-ts.
955
956config TOUCHSCREEN_MX25
957 tristate "Freescale i.MX25 touchscreen input driver"
958 depends on MFD_MX25_TSADC
959 help
960 Enable support for touchscreen connected to your i.MX25.
961
962 To compile this driver as a module, choose M here: the
963 module will be called fsl-imx25-tcq.
964
965config TOUCHSCREEN_MC13783
966 tristate "Freescale MC13783 touchscreen input driver"
967 depends on MFD_MC13XXX
968 help
969 Say Y here if you have an Freescale MC13783 PMIC on your
970 board and want to use its touchscreen
971
972 If unsure, say N.
973
974 To compile this driver as a module, choose M here: the
975 module will be called mc13783_ts.
976
977config TOUCHSCREEN_USB_EGALAX
978 default y
979 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
980 depends on TOUCHSCREEN_USB_COMPOSITE
981
982config TOUCHSCREEN_USB_PANJIT
983 default y
984 bool "PanJit device support" if EXPERT
985 depends on TOUCHSCREEN_USB_COMPOSITE
986
987config TOUCHSCREEN_USB_3M
988 default y
989 bool "3M/Microtouch EX II series device support" if EXPERT
990 depends on TOUCHSCREEN_USB_COMPOSITE
991
992config TOUCHSCREEN_USB_ITM
993 default y
994 bool "ITM device support" if EXPERT
995 depends on TOUCHSCREEN_USB_COMPOSITE
996
997config TOUCHSCREEN_USB_ETURBO
998 default y
999 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1000 depends on TOUCHSCREEN_USB_COMPOSITE
1001
1002config TOUCHSCREEN_USB_GUNZE
1003 default y
1004 bool "Gunze AHL61 device support" if EXPERT
1005 depends on TOUCHSCREEN_USB_COMPOSITE
1006
1007config TOUCHSCREEN_USB_DMC_TSC10
1008 default y
1009 bool "DMC TSC-10/25 device support" if EXPERT
1010 depends on TOUCHSCREEN_USB_COMPOSITE
1011
1012config TOUCHSCREEN_USB_IRTOUCH
1013 default y
1014 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1015 depends on TOUCHSCREEN_USB_COMPOSITE
1016
1017config TOUCHSCREEN_USB_IDEALTEK
1018 default y
1019 bool "IdealTEK URTC1000 device support" if EXPERT
1020 depends on TOUCHSCREEN_USB_COMPOSITE
1021
1022config TOUCHSCREEN_USB_GENERAL_TOUCH
1023 default y
1024 bool "GeneralTouch Touchscreen device support" if EXPERT
1025 depends on TOUCHSCREEN_USB_COMPOSITE
1026
1027config TOUCHSCREEN_USB_GOTOP
1028 default y
1029 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1030 depends on TOUCHSCREEN_USB_COMPOSITE
1031
1032config TOUCHSCREEN_USB_JASTEC
1033 default y
1034 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1035 depends on TOUCHSCREEN_USB_COMPOSITE
1036
1037config TOUCHSCREEN_USB_ELO
1038 default y
1039 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1040 depends on TOUCHSCREEN_USB_COMPOSITE
1041
1042config TOUCHSCREEN_USB_E2I
1043 default y
1044 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1045 depends on TOUCHSCREEN_USB_COMPOSITE
1046
1047config TOUCHSCREEN_USB_ZYTRONIC
1048 default y
1049 bool "Zytronic controller" if EXPERT
1050 depends on TOUCHSCREEN_USB_COMPOSITE
1051
1052config TOUCHSCREEN_USB_ETT_TC45USB
1053 default y
1054 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1055 depends on TOUCHSCREEN_USB_COMPOSITE
1056
1057config TOUCHSCREEN_USB_NEXIO
1058 default y
1059 bool "NEXIO/iNexio device support" if EXPERT
1060 depends on TOUCHSCREEN_USB_COMPOSITE
1061
1062config TOUCHSCREEN_USB_EASYTOUCH
1063 default y
1064 bool "EasyTouch USB Touch controller device support" if EXPERT
1065 depends on TOUCHSCREEN_USB_COMPOSITE
1066 help
1067 Say Y here if you have an EasyTouch USB Touch controller.
1068 If unsure, say N.
1069
1070config TOUCHSCREEN_TOUCHIT213
1071 tristate "Sahara TouchIT-213 touchscreen"
1072 select SERIO
1073 help
1074 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1075
1076 If unsure, say N.
1077
1078 To compile this driver as a module, choose M here: the
1079 module will be called touchit213.
1080
1081config TOUCHSCREEN_TS4800
1082 tristate "TS-4800 touchscreen"
1083 depends on HAS_IOMEM && OF
1084 depends on SOC_IMX51 || COMPILE_TEST
1085 select MFD_SYSCON
1086 help
1087 Say Y here if you have a touchscreen on a TS-4800 board.
1088
1089 On TS-4800, the touchscreen is not handled directly by Linux but by
1090 a companion FPGA.
1091
1092 If unsure, say N.
1093
1094 To compile this driver as a module, choose M here: the
1095 module will be called ts4800_ts.
1096
1097config TOUCHSCREEN_TSC_SERIO
1098 tristate "TSC-10/25/40 serial touchscreen support"
1099 select SERIO
1100 help
1101 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1102 to your system.
1103
1104 If unsure, say N.
1105
1106 To compile this driver as a module, choose M here: the
1107 module will be called tsc40.
1108
1109config TOUCHSCREEN_TSC200X_CORE
1110 tristate
1111
1112config TOUCHSCREEN_TSC2004
1113 tristate "TSC2004 based touchscreens"
1114 depends on I2C
1115 select REGMAP_I2C
1116 select TOUCHSCREEN_TSC200X_CORE
1117 help
1118 Say Y here if you have a TSC2004 based touchscreen.
1119
1120 If unsure, say N.
1121
1122 To compile this driver as a module, choose M here: the
1123 module will be called tsc2004.
1124
1125config TOUCHSCREEN_TSC2005
1126 tristate "TSC2005 based touchscreens"
1127 depends on SPI_MASTER
1128 select REGMAP_SPI
1129 select TOUCHSCREEN_TSC200X_CORE
1130 help
1131 Say Y here if you have a TSC2005 based touchscreen.
1132
1133 If unsure, say N.
1134
1135 To compile this driver as a module, choose M here: the
1136 module will be called tsc2005.
1137
1138config TOUCHSCREEN_TSC2007
1139 tristate "TSC2007 based touchscreens"
1140 depends on I2C
1141 help
1142 Say Y here if you have a TSC2007 based touchscreen.
1143
1144 If unsure, say N.
1145
1146 To compile this driver as a module, choose M here: the
1147 module will be called tsc2007.
1148
1149config TOUCHSCREEN_TSC2007_IIO
1150 bool "IIO interface for external ADC input and temperature"
1151 depends on TOUCHSCREEN_TSC2007
1152 depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1153 help
1154 Saying Y here adds an iio interface to the tsc2007 which
1155 provides values for the AUX input (used for e.g. battery
1156 or ambient light monitoring), temperature and raw input
1157 values.
1158
1159config TOUCHSCREEN_PCAP
1160 tristate "Motorola PCAP touchscreen"
1161 depends on EZX_PCAP
1162 help
1163 Say Y here if you have a Motorola EZX telephone and
1164 want to enable support for the built-in touchscreen.
1165
1166 To compile this driver as a module, choose M here: the
1167 module will be called pcap_ts.
1168
1169config TOUCHSCREEN_RM_TS
1170 tristate "Raydium I2C Touchscreen"
1171 depends on I2C
1172 depends on GPIOLIB || COMPILE_TEST
1173 help
1174 Say Y here if you have Raydium series I2C touchscreen,
1175 such as RM32380, connected to your system.
1176
1177 If unsure, say N.
1178
1179 To compile this driver as a module, choose M here: the
1180 module will be called raydium_i2c_ts.
1181
1182config TOUCHSCREEN_SILEAD
1183 tristate "Silead I2C touchscreen"
1184 depends on I2C
1185 help
1186 Say Y here if you have the Silead touchscreen connected to
1187 your system.
1188
1189 If unsure, say N.
1190
1191 To compile this driver as a module, choose M here: the
1192 module will be called silead.
1193
1194config TOUCHSCREEN_SIS_I2C
1195 tristate "SiS 9200 family I2C touchscreen"
1196 depends on I2C
1197 select CRC_ITU_T
1198 depends on GPIOLIB || COMPILE_TEST
1199 help
1200 This enables support for SiS 9200 family over I2C based touchscreens.
1201
1202 If unsure, say N.
1203
1204 To compile this driver as a module, choose M here: the
1205 module will be called sis_i2c.
1206
1207config TOUCHSCREEN_ST1232
1208 tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1209 depends on I2C
1210 help
1211 Say Y here if you want to support the Sitronix ST1232
1212 or ST1633 touchscreen controller.
1213
1214 If unsure, say N.
1215
1216 To compile this driver as a module, choose M here: the
1217 module will be called st1232_ts.
1218
1219config TOUCHSCREEN_STMFTS
1220 tristate "STMicroelectronics STMFTS touchscreen"
1221 depends on I2C
1222 depends on LEDS_CLASS
1223 help
1224 Say Y here if you want support for STMicroelectronics
1225 STMFTS touchscreen.
1226
1227 To compile this driver as a module, choose M here: the
1228 module will be called stmfts.
1229
1230config TOUCHSCREEN_STMPE
1231 tristate "STMicroelectronics STMPE touchscreens"
1232 depends on MFD_STMPE
1233 depends on OF
1234 help
1235 Say Y here if you want support for STMicroelectronics
1236 STMPE touchscreen controllers.
1237
1238 To compile this driver as a module, choose M here: the
1239 module will be called stmpe-ts.
1240
1241config TOUCHSCREEN_SUN4I
1242 tristate "Allwinner sun4i resistive touchscreen controller support"
1243 depends on ARCH_SUNXI || COMPILE_TEST
1244 depends on HWMON
1245 depends on THERMAL || !THERMAL_OF
1246 help
1247 This selects support for the resistive touchscreen controller
1248 found on Allwinner sunxi SoCs.
1249
1250 To compile this driver as a module, choose M here: the
1251 module will be called sun4i-ts.
1252
1253config TOUCHSCREEN_SUR40
1254 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1255 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1256 depends on VIDEO_DEV
1257 select VIDEOBUF2_DMA_SG
1258 help
1259 Say Y here if you want support for the Samsung SUR40 touchscreen
1260 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1261
1262 To compile this driver as a module, choose M here: the
1263 module will be called sur40.
1264
1265config TOUCHSCREEN_SURFACE3_SPI
1266 tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1267 depends on SPI
1268 depends on GPIOLIB || COMPILE_TEST
1269 help
1270 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1271 controller chip as found on the Surface 3 in your system.
1272
1273 If unsure, say N.
1274
1275 To compile this driver as a module, choose M here: the
1276 module will be called surface3_spi.
1277
1278config TOUCHSCREEN_SX8654
1279 tristate "Semtech SX8654 touchscreen"
1280 depends on I2C
1281 help
1282 Say Y here if you have a Semtech SX8654 touchscreen controller.
1283
1284 If unsure, say N
1285
1286 To compile this driver as a module, choose M here: the
1287 module will be called sx8654.
1288
1289config TOUCHSCREEN_TPS6507X
1290 tristate "TPS6507x based touchscreens"
1291 depends on I2C
1292 help
1293 Say Y here if you have a TPS6507x based touchscreen
1294 controller.
1295
1296 If unsure, say N.
1297
1298 To compile this driver as a module, choose M here: the
1299 module will be called tps6507x_ts.
1300
1301config TOUCHSCREEN_ZET6223
1302 tristate "Zeitec ZET6223 touchscreen driver"
1303 depends on I2C
1304 help
1305 Say Y here if you have a touchscreen using Zeitec ZET6223
1306
1307 If unsure, say N.
1308
1309 To compile this driver as a module, choose M here: the
1310 module will be called zet6223.
1311
1312config TOUCHSCREEN_ZFORCE
1313 tristate "Neonode zForce infrared touchscreens"
1314 depends on I2C
1315 depends on GPIOLIB || COMPILE_TEST
1316 help
1317 Say Y here if you have a touchscreen using the zforce
1318 infraread technology from Neonode.
1319
1320 If unsure, say N.
1321
1322 To compile this driver as a module, choose M here: the
1323 module will be called zforce_ts.
1324
1325config TOUCHSCREEN_COLIBRI_VF50
1326 tristate "Toradex Colibri on board touchscreen driver"
1327 depends on IIO
1328 depends on GPIOLIB || COMPILE_TEST
1329 help
1330 Say Y here if you have a Colibri VF50 and plan to use
1331 the on-board provided 4-wire touchscreen driver.
1332
1333 If unsure, say N.
1334
1335 To compile this driver as a module, choose M here: the
1336 module will be called colibri_vf50_ts.
1337
1338config TOUCHSCREEN_ROHM_BU21023
1339 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1340 depends on I2C
1341 help
1342 Say Y here if you have a touchscreen using ROHM BU21023/24.
1343
1344 If unsure, say N.
1345
1346 To compile this driver as a module, choose M here: the
1347 module will be called bu21023_ts.
1348
1349config TOUCHSCREEN_IQS5XX
1350 tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1351 depends on I2C
1352 help
1353 Say Y to enable support for the Azoteq IQS550/572/525
1354 family of trackpad/touchscreen controllers.
1355
1356 To compile this driver as a module, choose M here: the
1357 module will be called iqs5xx.
1358
1359config TOUCHSCREEN_IQS7211
1360 tristate "Azoteq IQS7210A/7211A/E trackpad/touchscreen controller"
1361 depends on I2C
1362 help
1363 Say Y to enable support for the Azoteq IQS7210A/7211A/E
1364 family of trackpad/touchscreen controllers.
1365
1366 To compile this driver as a module, choose M here: the
1367 module will be called iqs7211.
1368
1369config TOUCHSCREEN_ZINITIX
1370 tristate "Zinitix touchscreen support"
1371 depends on I2C
1372 help
1373 Say Y here if you have a touchscreen using Zinitix bt541,
1374 or something similar enough.
1375
1376 If unsure, say N.
1377
1378 To compile this driver as a module, choose M here: the
1379 module will be called zinitix.
1380
1381config TOUCHSCREEN_HIMAX_HX83112B
1382 tristate "Himax hx83112b touchscreen driver"
1383 depends on I2C
1384 select REGMAP_I2C
1385 help
1386 Say Y here to enable support for Himax hx83112b touchscreens.
1387
1388 If unsure, say N.
1389
1390 To compile this driver as a module, choose M here: the
1391 module will be called himax_hx83112b.
1392
1393endif
1#
2# Touchscreen driver configuration
3#
4menuconfig INPUT_TOUCHSCREEN
5 bool "Touchscreens"
6 help
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
9
10 If unsure, say Y.
11
12if INPUT_TOUCHSCREEN
13
14config TOUCHSCREEN_PROPERTIES
15 def_tristate INPUT
16 depends on INPUT
17
18config TOUCHSCREEN_88PM860X
19 tristate "Marvell 88PM860x touchscreen"
20 depends on MFD_88PM860X
21 help
22 Say Y here if you have a 88PM860x PMIC and want to enable
23 support for the built-in touchscreen.
24
25 If unsure, say N.
26
27 To compile this driver as a module, choose M here: the
28 module will be called 88pm860x-ts.
29
30config TOUCHSCREEN_ADS7846
31 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
32 depends on SPI_MASTER
33 depends on HWMON = n || HWMON
34 help
35 Say Y here if you have a touchscreen interface using the
36 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
37 and your board-specific setup code includes that in its
38 table of SPI devices.
39
40 If HWMON is selected, and the driver is told the reference voltage
41 on your board, you will also get hwmon interfaces for the voltage
42 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
43
44 If unsure, say N (but it's safe to say "Y").
45
46 To compile this driver as a module, choose M here: the
47 module will be called ads7846.
48
49config TOUCHSCREEN_AD7877
50 tristate "AD7877 based touchscreens"
51 depends on SPI_MASTER
52 help
53 Say Y here if you have a touchscreen interface using the
54 AD7877 controller, and your board-specific initialization
55 code includes that in its table of SPI devices.
56
57 If unsure, say N (but it's safe to say "Y").
58
59 To compile this driver as a module, choose M here: the
60 module will be called ad7877.
61
62config TOUCHSCREEN_AD7879
63 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
64 help
65 Say Y here if you want to support a touchscreen interface using
66 the AD7879-1/AD7889-1 controller.
67
68 You should select a bus connection too.
69
70 To compile this driver as a module, choose M here: the
71 module will be called ad7879.
72
73config TOUCHSCREEN_AD7879_I2C
74 tristate "support I2C bus connection"
75 depends on TOUCHSCREEN_AD7879 && I2C
76 help
77 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
78
79 To compile this driver as a module, choose M here: the
80 module will be called ad7879-i2c.
81
82config TOUCHSCREEN_AD7879_SPI
83 tristate "support SPI bus connection"
84 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
85 help
86 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
87
88 If unsure, say N (but it's safe to say "Y").
89
90 To compile this driver as a module, choose M here: the
91 module will be called ad7879-spi.
92
93config TOUCHSCREEN_AR1021_I2C
94 tristate "Microchip AR1021 i2c touchscreen"
95 depends on I2C && OF
96 help
97 Say Y here if you have the Microchip AR1021 touchscreen controller
98 chip in your system.
99
100 If unsure, say N.
101
102 To compile this driver as a module, choose M here: the
103 module will be called ar1021_i2c.
104
105config TOUCHSCREEN_ATMEL_MXT
106 tristate "Atmel mXT I2C Touchscreen"
107 depends on I2C
108 select FW_LOADER
109 help
110 Say Y here if you have Atmel mXT series I2C touchscreen,
111 such as AT42QT602240/ATMXT224, connected to your system.
112
113 If unsure, say N.
114
115 To compile this driver as a module, choose M here: the
116 module will be called atmel_mxt_ts.
117
118config TOUCHSCREEN_AUO_PIXCIR
119 tristate "AUO in-cell touchscreen using Pixcir ICs"
120 depends on I2C
121 depends on GPIOLIB || COMPILE_TEST
122 help
123 Say Y here if you have a AUO display with in-cell touchscreen
124 using Pixcir ICs.
125
126 If unsure, say N.
127
128 To compile this driver as a module, choose M here: the
129 module will be called auo-pixcir-ts.
130
131config TOUCHSCREEN_BU21013
132 tristate "BU21013 based touch panel controllers"
133 depends on I2C
134 help
135 Say Y here if you have a bu21013 touchscreen connected to
136 your system.
137
138 If unsure, say N.
139
140 To compile this driver as a module, choose M here: the
141 module will be called bu21013_ts.
142
143config TOUCHSCREEN_CHIPONE_ICN8318
144 tristate "chipone icn8318 touchscreen controller"
145 depends on GPIOLIB || COMPILE_TEST
146 depends on I2C
147 depends on OF
148 help
149 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
150
151 If unsure, say N.
152
153 To compile this driver as a module, choose M here: the
154 module will be called chipone_icn8318.
155
156config TOUCHSCREEN_CY8CTMG110
157 tristate "cy8ctmg110 touchscreen"
158 depends on I2C
159 depends on GPIOLIB || COMPILE_TEST
160 help
161 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
162 an AAVA device.
163
164 If unsure, say N.
165
166 To compile this driver as a module, choose M here: the
167 module will be called cy8ctmg110_ts.
168
169config TOUCHSCREEN_CYTTSP_CORE
170 tristate "Cypress TTSP touchscreen"
171 help
172 Say Y here if you have a touchscreen using controller from
173 the Cypress TrueTouch(tm) Standard Product family connected
174 to your system. You will also need to select appropriate
175 bus connection below.
176
177 If unsure, say N.
178
179 To compile this driver as a module, choose M here: the
180 module will be called cyttsp_core.
181
182config TOUCHSCREEN_CYTTSP_I2C
183 tristate "support I2C bus connection"
184 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
185 help
186 Say Y here if the touchscreen is connected via I2C bus.
187
188 To compile this driver as a module, choose M here: the
189 module will be called cyttsp_i2c.
190
191config TOUCHSCREEN_CYTTSP_SPI
192 tristate "support SPI bus connection"
193 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
194 help
195 Say Y here if the touchscreen is connected via SPI bus.
196
197 To compile this driver as a module, choose M here: the
198 module will be called cyttsp_spi.
199
200config TOUCHSCREEN_CYTTSP4_CORE
201 tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
202 help
203 Core driver for Cypress TrueTouch(tm) Standard Product
204 Generation4 touchscreen controllers.
205
206 Say Y here if you have a Cypress Gen4 touchscreen.
207
208 If unsure, say N.
209
210 To compile this driver as a module, choose M here.
211
212config TOUCHSCREEN_CYTTSP4_I2C
213 tristate "support I2C bus connection"
214 depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
215 help
216 Say Y here if the touchscreen is connected via I2C bus.
217
218 To compile this driver as a module, choose M here: the
219 module will be called cyttsp4_i2c.
220
221config TOUCHSCREEN_CYTTSP4_SPI
222 tristate "support SPI bus connection"
223 depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
224 help
225 Say Y here if the touchscreen is connected via SPI bus.
226
227 To compile this driver as a module, choose M here: the
228 module will be called cyttsp4_spi.
229
230config TOUCHSCREEN_DA9034
231 tristate "Touchscreen support for Dialog Semiconductor DA9034"
232 depends on PMIC_DA903X
233 default y
234 help
235 Say Y here to enable the support for the touchscreen found
236 on Dialog Semiconductor DA9034 PMIC.
237
238 If unsure, say N.
239
240 To compile this driver as a module, choose M here: the
241 module will be called da9034-ts.
242
243config TOUCHSCREEN_DA9052
244 tristate "Dialog DA9052/DA9053 TSI"
245 depends on PMIC_DA9052
246 help
247 Say Y here to support the touchscreen found on Dialog Semiconductor
248 DA9052-BC and DA9053-AA/Bx PMICs.
249
250 If unsure, say N.
251
252 To compile this driver as a module, choose M here: the
253 module will be called da9052_tsi.
254
255config TOUCHSCREEN_DYNAPRO
256 tristate "Dynapro serial touchscreen"
257 select SERIO
258 help
259 Say Y here if you have a Dynapro serial touchscreen connected to
260 your system.
261
262 If unsure, say N.
263
264 To compile this driver as a module, choose M here: the
265 module will be called dynapro.
266
267config TOUCHSCREEN_HAMPSHIRE
268 tristate "Hampshire serial touchscreen"
269 select SERIO
270 help
271 Say Y here if you have a Hampshire serial touchscreen connected to
272 your system.
273
274 If unsure, say N.
275
276 To compile this driver as a module, choose M here: the
277 module will be called hampshire.
278
279config TOUCHSCREEN_EETI
280 tristate "EETI touchscreen panel support"
281 depends on I2C
282 help
283 Say Y here to enable support for I2C connected EETI touch panels.
284
285 To compile this driver as a module, choose M here: the
286 module will be called eeti_ts.
287
288config TOUCHSCREEN_EGALAX
289 tristate "EETI eGalax multi-touch panel support"
290 depends on I2C && OF
291 help
292 Say Y here to enable support for I2C connected EETI
293 eGalax multi-touch panels.
294
295 To compile this driver as a module, choose M here: the
296 module will be called egalax_ts.
297
298config TOUCHSCREEN_EGALAX_SERIAL
299 tristate "EETI eGalax serial touchscreen"
300 select SERIO
301 help
302 Say Y here to enable support for serial connected EETI
303 eGalax touch panels.
304
305 To compile this driver as a module, choose M here: the
306 module will be called egalax_ts_serial.
307
308config TOUCHSCREEN_FT6236
309 tristate "FT6236 I2C touchscreen"
310 depends on I2C
311 depends on GPIOLIB || COMPILE_TEST
312 help
313 Say Y here to enable support for the I2C connected FT6x06 and
314 FT6x36 family of capacitive touchscreen drivers.
315
316 If unsure, say N.
317
318 To compile this driver as a module, choose M here: the
319 module will be called ft6236.
320
321config TOUCHSCREEN_FUJITSU
322 tristate "Fujitsu serial touchscreen"
323 select SERIO
324 help
325 Say Y here if you have the Fujitsu touchscreen (such as one
326 installed in Lifebook P series laptop) connected to your
327 system.
328
329 If unsure, say N.
330
331 To compile this driver as a module, choose M here: the
332 module will be called fujitsu-ts.
333
334config TOUCHSCREEN_GOODIX
335 tristate "Goodix I2C touchscreen"
336 depends on I2C
337 depends on GPIOLIB || COMPILE_TEST
338 help
339 Say Y here if you have the Goodix touchscreen (such as one
340 installed in Onda v975w tablets) connected to your
341 system. It also supports 5-finger chip models, which can be
342 found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
343
344 If unsure, say N.
345
346 To compile this driver as a module, choose M here: the
347 module will be called goodix.
348
349config TOUCHSCREEN_ILI210X
350 tristate "Ilitek ILI210X based touchscreen"
351 depends on I2C
352 help
353 Say Y here if you have a ILI210X based touchscreen
354 controller. This driver supports models ILI2102,
355 ILI2102s, ILI2103, ILI2103s and ILI2105.
356 Such kind of chipsets can be found in Amazon Kindle Fire
357 touchscreens.
358
359 If unsure, say N.
360
361 To compile this driver as a module, choose M here: the
362 module will be called ili210x.
363
364config TOUCHSCREEN_IPROC
365 tristate "IPROC touch panel driver support"
366 depends on ARCH_BCM_IPROC || COMPILE_TEST
367 help
368 Say Y here if you want to add support for the IPROC touch
369 controller to your system.
370
371 If unsure, say N.
372
373 To compile this driver as a module, choose M here: the
374 module will be called bcm_iproc_tsc.
375
376config TOUCHSCREEN_S3C2410
377 tristate "Samsung S3C2410/generic touchscreen input driver"
378 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
379 depends on S3C_ADC
380 help
381 Say Y here if you have the s3c2410 touchscreen.
382
383 If unsure, say N.
384
385 To compile this driver as a module, choose M here: the
386 module will be called s3c2410_ts.
387
388config TOUCHSCREEN_GUNZE
389 tristate "Gunze AHL-51S touchscreen"
390 select SERIO
391 help
392 Say Y here if you have the Gunze AHL-51 touchscreen connected to
393 your system.
394
395 If unsure, say N.
396
397 To compile this driver as a module, choose M here: the
398 module will be called gunze.
399
400config TOUCHSCREEN_ELAN
401 tristate "Elan eKTH I2C touchscreen"
402 depends on I2C
403 help
404 Say Y here if you have an Elan eKTH I2C touchscreen
405 connected to your system.
406
407 If unsure, say N.
408
409 To compile this driver as a module, choose M here: the
410 module will be called elants_i2c.
411
412config TOUCHSCREEN_ELO
413 tristate "Elo serial touchscreens"
414 select SERIO
415 help
416 Say Y here if you have an Elo serial touchscreen connected to
417 your system.
418
419 If unsure, say N.
420
421 To compile this driver as a module, choose M here: the
422 module will be called elo.
423
424config TOUCHSCREEN_WACOM_W8001
425 tristate "Wacom W8001 penabled serial touchscreen"
426 select SERIO
427 help
428 Say Y here if you have an Wacom W8001 penabled serial touchscreen
429 connected to your system.
430
431 If unsure, say N.
432
433 To compile this driver as a module, choose M here: the
434 module will be called wacom_w8001.
435
436config TOUCHSCREEN_WACOM_I2C
437 tristate "Wacom Tablet support (I2C)"
438 depends on I2C
439 help
440 Say Y here if you want to use the I2C version of the Wacom
441 Pen Tablet.
442
443 If unsure, say N.
444
445 To compile this driver as a module, choose M here: the module
446 will be called wacom_i2c.
447
448config TOUCHSCREEN_LPC32XX
449 tristate "LPC32XX touchscreen controller"
450 depends on ARCH_LPC32XX
451 help
452 Say Y here if you have a LPC32XX device and want
453 to support the built-in touchscreen.
454
455 To compile this driver as a module, choose M here: the
456 module will be called lpc32xx_ts.
457
458config TOUCHSCREEN_MAX11801
459 tristate "MAX11801 based touchscreens"
460 depends on I2C
461 help
462 Say Y here if you have a MAX11801 based touchscreen
463 controller.
464
465 If unsure, say N.
466
467 To compile this driver as a module, choose M here: the
468 module will be called max11801_ts.
469
470config TOUCHSCREEN_MCS5000
471 tristate "MELFAS MCS-5000 touchscreen"
472 depends on I2C
473 help
474 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
475 chip in your system.
476
477 If unsure, say N.
478
479 To compile this driver as a module, choose M here: the
480 module will be called mcs5000_ts.
481
482config TOUCHSCREEN_MMS114
483 tristate "MELFAS MMS114 touchscreen"
484 depends on I2C
485 help
486 Say Y here if you have the MELFAS MMS114 touchscreen controller
487 chip in your system.
488
489 If unsure, say N.
490
491 To compile this driver as a module, choose M here: the
492 module will be called mms114.
493
494config TOUCHSCREEN_MELFAS_MIP4
495 tristate "MELFAS MIP4 Touchscreen"
496 depends on I2C
497 help
498 Say Y here if you have a MELFAS MIP4 Touchscreen device.
499
500 If unsure, say N.
501
502 To compile this driver as a module, choose M here:
503 the module will be called melfas_mip4.
504
505config TOUCHSCREEN_MTOUCH
506 tristate "MicroTouch serial touchscreens"
507 select SERIO
508 help
509 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
510 your system.
511
512 If unsure, say N.
513
514 To compile this driver as a module, choose M here: the
515 module will be called mtouch.
516
517config TOUCHSCREEN_IMX6UL_TSC
518 tristate "Freescale i.MX6UL touchscreen controller"
519 depends on (OF && GPIOLIB) || COMPILE_TEST
520 help
521 Say Y here if you have a Freescale i.MX6UL, and want to
522 use the internal touchscreen controller.
523
524 If unsure, say N.
525
526 To compile this driver as a module, choose M here: the
527 module will be called imx6ul_tsc.
528
529config TOUCHSCREEN_INEXIO
530 tristate "iNexio serial touchscreens"
531 select SERIO
532 help
533 Say Y here if you have an iNexio serial touchscreen connected to
534 your system.
535
536 If unsure, say N.
537
538 To compile this driver as a module, choose M here: the
539 module will be called inexio.
540
541config TOUCHSCREEN_INTEL_MID
542 tristate "Intel MID platform resistive touchscreen"
543 depends on INTEL_SCU_IPC
544 help
545 Say Y here if you have a Intel MID based touchscreen in
546 your system.
547
548 If unsure, say N.
549
550 To compile this driver as a module, choose M here: the
551 module will be called intel_mid_touch.
552
553config TOUCHSCREEN_MK712
554 tristate "ICS MicroClock MK712 touchscreen"
555 help
556 Say Y here if you have the ICS MicroClock MK712 touchscreen
557 controller chip in your system.
558
559 If unsure, say N.
560
561 To compile this driver as a module, choose M here: the
562 module will be called mk712.
563
564config TOUCHSCREEN_HP600
565 tristate "HP Jornada 6xx touchscreen"
566 depends on SH_HP6XX && SH_ADC
567 help
568 Say Y here if you have a HP Jornada 620/660/680/690 and want to
569 support the built-in touchscreen.
570
571 To compile this driver as a module, choose M here: the
572 module will be called hp680_ts_input.
573
574config TOUCHSCREEN_HP7XX
575 tristate "HP Jornada 7xx touchscreen"
576 depends on SA1100_JORNADA720_SSP
577 help
578 Say Y here if you have a HP Jornada 710/720/728 and want
579 to support the built-in touchscreen.
580
581 To compile this driver as a module, choose M here: the
582 module will be called jornada720_ts.
583
584config TOUCHSCREEN_IPAQ_MICRO
585 tristate "HP iPAQ Atmel Micro ASIC touchscreen"
586 depends on MFD_IPAQ_MICRO
587 help
588 Say Y here to enable support for the touchscreen attached to
589 the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
590
591 If unsure, say N.
592
593 To compile this driver as a module, choose M here: the
594 module will be called ipaq-micro-ts.
595
596config TOUCHSCREEN_HTCPEN
597 tristate "HTC Shift X9500 touchscreen"
598 depends on ISA
599 help
600 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
601 Clio / Shangrila and want to support the built-in touchscreen.
602
603 If unsure, say N.
604
605 To compile this driver as a module, choose M here: the
606 module will be called htcpen.
607
608config TOUCHSCREEN_PENMOUNT
609 tristate "Penmount serial touchscreen"
610 select SERIO
611 help
612 Say Y here if you have a Penmount serial touchscreen connected to
613 your system.
614
615 If unsure, say N.
616
617 To compile this driver as a module, choose M here: the
618 module will be called penmount.
619
620config TOUCHSCREEN_EDT_FT5X06
621 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
622 depends on I2C
623 help
624 Say Y here if you have an EDT "Polytouch" touchscreen based
625 on the FocalTech FT5x06 family of controllers connected to
626 your system.
627
628 If unsure, say N.
629
630 To compile this driver as a module, choose M here: the
631 module will be called edt-ft5x06.
632
633config TOUCHSCREEN_MIGOR
634 tristate "Renesas MIGO-R touchscreen"
635 depends on SH_MIGOR && I2C
636 help
637 Say Y here to enable MIGO-R touchscreen support.
638
639 If unsure, say N.
640
641 To compile this driver as a module, choose M here: the
642 module will be called migor_ts.
643
644config TOUCHSCREEN_TOUCHRIGHT
645 tristate "Touchright serial touchscreen"
646 select SERIO
647 help
648 Say Y here if you have a Touchright serial touchscreen connected to
649 your system.
650
651 If unsure, say N.
652
653 To compile this driver as a module, choose M here: the
654 module will be called touchright.
655
656config TOUCHSCREEN_TOUCHWIN
657 tristate "Touchwin serial touchscreen"
658 select SERIO
659 help
660 Say Y here if you have a Touchwin serial touchscreen connected to
661 your system.
662
663 If unsure, say N.
664
665 To compile this driver as a module, choose M here: the
666 module will be called touchwin.
667
668config TOUCHSCREEN_TI_AM335X_TSC
669 tristate "TI Touchscreen Interface"
670 depends on MFD_TI_AM335X_TSCADC
671 help
672 Say Y here if you have 4/5/8 wire touchscreen controller
673 to be connected to the ADC controller on your TI AM335x SoC.
674
675 If unsure, say N.
676
677 To compile this driver as a module, choose M here: the
678 module will be called ti_am335x_tsc.
679
680config TOUCHSCREEN_UCB1400
681 tristate "Philips UCB1400 touchscreen"
682 depends on AC97_BUS
683 depends on UCB1400_CORE
684 help
685 This enables support for the Philips UCB1400 touchscreen interface.
686 The UCB1400 is an AC97 audio codec. The touchscreen interface
687 will be initialized only after the ALSA subsystem has been
688 brought up and the UCB1400 detected. You therefore have to
689 configure ALSA support as well (either built-in or modular,
690 independently of whether this driver is itself built-in or
691 modular) for this driver to work.
692
693 To compile this driver as a module, choose M here: the
694 module will be called ucb1400_ts.
695
696config TOUCHSCREEN_PIXCIR
697 tristate "PIXCIR I2C touchscreens"
698 depends on I2C
699 help
700 Say Y here if you have a pixcir i2c touchscreen
701 controller.
702
703 If unsure, say N.
704
705 To compile this driver as a module, choose M here: the
706 module will be called pixcir_i2c_ts.
707
708config TOUCHSCREEN_WDT87XX_I2C
709 tristate "Weida HiTech I2C touchscreen"
710 depends on I2C
711 help
712 Say Y here if you have a Weida WDT87XX I2C touchscreen
713 connected to your system.
714
715 If unsure, say N.
716
717 To compile this driver as a module, choose M here: the
718 module will be called wdt87xx_i2c.
719
720config TOUCHSCREEN_WM831X
721 tristate "Support for WM831x touchscreen controllers"
722 depends on MFD_WM831X
723 help
724 This enables support for the touchscreen controller on the WM831x
725 series of PMICs.
726
727 To compile this driver as a module, choose M here: the
728 module will be called wm831x-ts.
729
730config TOUCHSCREEN_WM97XX
731 tristate "Support for WM97xx AC97 touchscreen controllers"
732 depends on AC97_BUS
733 help
734 Say Y here if you have a Wolfson Microelectronics WM97xx
735 touchscreen connected to your system. Note that this option
736 only enables core driver, you will also need to select
737 support for appropriate chip below.
738
739 If unsure, say N.
740
741 To compile this driver as a module, choose M here: the
742 module will be called wm97xx-ts.
743
744config TOUCHSCREEN_WM9705
745 bool "WM9705 Touchscreen interface support"
746 depends on TOUCHSCREEN_WM97XX
747 default y
748 help
749 Say Y here to enable support for the Wolfson Microelectronics
750 WM9705 touchscreen controller.
751
752config TOUCHSCREEN_WM9712
753 bool "WM9712 Touchscreen interface support"
754 depends on TOUCHSCREEN_WM97XX
755 default y
756 help
757 Say Y here to enable support for the Wolfson Microelectronics
758 WM9712 touchscreen controller.
759
760config TOUCHSCREEN_WM9713
761 bool "WM9713 Touchscreen interface support"
762 depends on TOUCHSCREEN_WM97XX
763 default y
764 help
765 Say Y here to enable support for the Wolfson Microelectronics
766 WM9713 touchscreen controller.
767
768config TOUCHSCREEN_WM97XX_ATMEL
769 tristate "WM97xx Atmel accelerated touch"
770 depends on TOUCHSCREEN_WM97XX && AVR32
771 help
772 Say Y here for support for streaming mode with WM97xx touchscreens
773 on Atmel AT91 or AVR32 systems with an AC97C module.
774
775 Be aware that this will use channel B in the controller for
776 streaming data, this must not conflict with other AC97C drivers.
777
778 If unsure, say N.
779
780 To compile this driver as a module, choose M here: the module will
781 be called atmel-wm97xx.
782
783config TOUCHSCREEN_WM97XX_MAINSTONE
784 tristate "WM97xx Mainstone/Palm accelerated touch"
785 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
786 help
787 Say Y here for support for streaming mode with WM97xx touchscreens
788 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
789
790 If unsure, say N.
791
792 To compile this driver as a module, choose M here: the
793 module will be called mainstone-wm97xx.
794
795config TOUCHSCREEN_WM97XX_ZYLONITE
796 tristate "Zylonite accelerated touch"
797 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
798 select TOUCHSCREEN_WM9713
799 help
800 Say Y here for support for streaming mode with the touchscreen
801 on Zylonite systems.
802
803 If unsure, say N.
804
805 To compile this driver as a module, choose M here: the
806 module will be called zylonite-wm97xx.
807
808config TOUCHSCREEN_USB_COMPOSITE
809 tristate "USB Touchscreen Driver"
810 depends on USB_ARCH_HAS_HCD
811 select USB
812 help
813 USB Touchscreen driver for:
814 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
815 - PanJit TouchSet USB
816 - 3M MicroTouch USB (EX II series)
817 - ITM
818 - some other eTurboTouch
819 - Gunze AHL61
820 - DMC TSC-10/25
821 - IRTOUCHSYSTEMS/UNITOP
822 - IdealTEK URTC1000
823 - GoTop Super_Q2/GogoPen/PenPower tablets
824 - JASTEC USB Touch Controller/DigiTech DTR-02U
825 - Zytronic controllers
826 - Elo TouchSystems 2700 IntelliTouch
827 - EasyTouch USB Touch Controller from Data Modul
828 - e2i (Mimo monitors)
829
830 Have a look at <http://linux.chapter7.ch/touchkit/> for
831 a usage description and the required user-space stuff.
832
833 To compile this driver as a module, choose M here: the
834 module will be called usbtouchscreen.
835
836config TOUCHSCREEN_MX25
837 tristate "Freescale i.MX25 touchscreen input driver"
838 depends on MFD_MX25_TSADC
839 help
840 Enable support for touchscreen connected to your i.MX25.
841
842 To compile this driver as a module, choose M here: the
843 module will be called fsl-imx25-tcq.
844
845config TOUCHSCREEN_MC13783
846 tristate "Freescale MC13783 touchscreen input driver"
847 depends on MFD_MC13XXX
848 help
849 Say Y here if you have an Freescale MC13783 PMIC on your
850 board and want to use its touchscreen
851
852 If unsure, say N.
853
854 To compile this driver as a module, choose M here: the
855 module will be called mc13783_ts.
856
857config TOUCHSCREEN_USB_EGALAX
858 default y
859 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
860 depends on TOUCHSCREEN_USB_COMPOSITE
861
862config TOUCHSCREEN_USB_PANJIT
863 default y
864 bool "PanJit device support" if EXPERT
865 depends on TOUCHSCREEN_USB_COMPOSITE
866
867config TOUCHSCREEN_USB_3M
868 default y
869 bool "3M/Microtouch EX II series device support" if EXPERT
870 depends on TOUCHSCREEN_USB_COMPOSITE
871
872config TOUCHSCREEN_USB_ITM
873 default y
874 bool "ITM device support" if EXPERT
875 depends on TOUCHSCREEN_USB_COMPOSITE
876
877config TOUCHSCREEN_USB_ETURBO
878 default y
879 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
880 depends on TOUCHSCREEN_USB_COMPOSITE
881
882config TOUCHSCREEN_USB_GUNZE
883 default y
884 bool "Gunze AHL61 device support" if EXPERT
885 depends on TOUCHSCREEN_USB_COMPOSITE
886
887config TOUCHSCREEN_USB_DMC_TSC10
888 default y
889 bool "DMC TSC-10/25 device support" if EXPERT
890 depends on TOUCHSCREEN_USB_COMPOSITE
891
892config TOUCHSCREEN_USB_IRTOUCH
893 default y
894 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
895 depends on TOUCHSCREEN_USB_COMPOSITE
896
897config TOUCHSCREEN_USB_IDEALTEK
898 default y
899 bool "IdealTEK URTC1000 device support" if EXPERT
900 depends on TOUCHSCREEN_USB_COMPOSITE
901
902config TOUCHSCREEN_USB_GENERAL_TOUCH
903 default y
904 bool "GeneralTouch Touchscreen device support" if EXPERT
905 depends on TOUCHSCREEN_USB_COMPOSITE
906
907config TOUCHSCREEN_USB_GOTOP
908 default y
909 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
910 depends on TOUCHSCREEN_USB_COMPOSITE
911
912config TOUCHSCREEN_USB_JASTEC
913 default y
914 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
915 depends on TOUCHSCREEN_USB_COMPOSITE
916
917config TOUCHSCREEN_USB_ELO
918 default y
919 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
920 depends on TOUCHSCREEN_USB_COMPOSITE
921
922config TOUCHSCREEN_USB_E2I
923 default y
924 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
925 depends on TOUCHSCREEN_USB_COMPOSITE
926
927config TOUCHSCREEN_USB_ZYTRONIC
928 default y
929 bool "Zytronic controller" if EXPERT
930 depends on TOUCHSCREEN_USB_COMPOSITE
931
932config TOUCHSCREEN_USB_ETT_TC45USB
933 default y
934 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
935 depends on TOUCHSCREEN_USB_COMPOSITE
936
937config TOUCHSCREEN_USB_NEXIO
938 default y
939 bool "NEXIO/iNexio device support" if EXPERT
940 depends on TOUCHSCREEN_USB_COMPOSITE
941
942config TOUCHSCREEN_USB_EASYTOUCH
943 default y
944 bool "EasyTouch USB Touch controller device support" if EMBEDDED
945 depends on TOUCHSCREEN_USB_COMPOSITE
946 help
947 Say Y here if you have an EasyTouch USB Touch controller.
948 If unsure, say N.
949
950config TOUCHSCREEN_TOUCHIT213
951 tristate "Sahara TouchIT-213 touchscreen"
952 select SERIO
953 help
954 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
955
956 If unsure, say N.
957
958 To compile this driver as a module, choose M here: the
959 module will be called touchit213.
960
961config TOUCHSCREEN_TS4800
962 tristate "TS-4800 touchscreen"
963 depends on HAS_IOMEM && OF
964 depends on SOC_IMX51 || COMPILE_TEST
965 select MFD_SYSCON
966 select INPUT_POLLDEV
967 help
968 Say Y here if you have a touchscreen on a TS-4800 board.
969
970 On TS-4800, the touchscreen is not handled directly by Linux but by
971 a companion FPGA.
972
973 If unsure, say N.
974
975 To compile this driver as a module, choose M here: the
976 module will be called ts4800_ts.
977
978config TOUCHSCREEN_TSC_SERIO
979 tristate "TSC-10/25/40 serial touchscreen support"
980 select SERIO
981 help
982 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
983 to your system.
984
985 If unsure, say N.
986
987 To compile this driver as a module, choose M here: the
988 module will be called tsc40.
989
990config TOUCHSCREEN_TSC200X_CORE
991 tristate
992
993config TOUCHSCREEN_TSC2004
994 tristate "TSC2004 based touchscreens"
995 depends on I2C
996 select REGMAP_I2C
997 select TOUCHSCREEN_TSC200X_CORE
998 help
999 Say Y here if you have a TSC2004 based touchscreen.
1000
1001 If unsure, say N.
1002
1003 To compile this driver as a module, choose M here: the
1004 module will be called tsc2004.
1005
1006config TOUCHSCREEN_TSC2005
1007 tristate "TSC2005 based touchscreens"
1008 depends on SPI_MASTER
1009 select REGMAP_SPI
1010 select TOUCHSCREEN_TSC200X_CORE
1011 help
1012 Say Y here if you have a TSC2005 based touchscreen.
1013
1014 If unsure, say N.
1015
1016 To compile this driver as a module, choose M here: the
1017 module will be called tsc2005.
1018
1019config TOUCHSCREEN_TSC2007
1020 tristate "TSC2007 based touchscreens"
1021 depends on I2C
1022 help
1023 Say Y here if you have a TSC2007 based touchscreen.
1024
1025 If unsure, say N.
1026
1027 To compile this driver as a module, choose M here: the
1028 module will be called tsc2007.
1029
1030config TOUCHSCREEN_W90X900
1031 tristate "W90P910 touchscreen driver"
1032 depends on ARCH_W90X900
1033 help
1034 Say Y here if you have a W90P910 based touchscreen.
1035
1036 To compile this driver as a module, choose M here: the
1037 module will be called w90p910_ts.
1038
1039config TOUCHSCREEN_PCAP
1040 tristate "Motorola PCAP touchscreen"
1041 depends on EZX_PCAP
1042 help
1043 Say Y here if you have a Motorola EZX telephone and
1044 want to enable support for the built-in touchscreen.
1045
1046 To compile this driver as a module, choose M here: the
1047 module will be called pcap_ts.
1048
1049config TOUCHSCREEN_ST1232
1050 tristate "Sitronix ST1232 touchscreen controllers"
1051 depends on I2C
1052 help
1053 Say Y here if you want to support Sitronix ST1232
1054 touchscreen controller.
1055
1056 If unsure, say N.
1057
1058 To compile this driver as a module, choose M here: the
1059 module will be called st1232_ts.
1060
1061config TOUCHSCREEN_STMPE
1062 tristate "STMicroelectronics STMPE touchscreens"
1063 depends on MFD_STMPE
1064 depends on (OF || COMPILE_TEST)
1065 help
1066 Say Y here if you want support for STMicroelectronics
1067 STMPE touchscreen controllers.
1068
1069 To compile this driver as a module, choose M here: the
1070 module will be called stmpe-ts.
1071
1072config TOUCHSCREEN_SUN4I
1073 tristate "Allwinner sun4i resistive touchscreen controller support"
1074 depends on ARCH_SUNXI || COMPILE_TEST
1075 depends on HWMON
1076 depends on THERMAL || !THERMAL_OF
1077 help
1078 This selects support for the resistive touchscreen controller
1079 found on Allwinner sunxi SoCs.
1080
1081 To compile this driver as a module, choose M here: the
1082 module will be called sun4i-ts.
1083
1084config TOUCHSCREEN_SUR40
1085 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1086 depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1087 depends on VIDEO_V4L2
1088 select INPUT_POLLDEV
1089 select VIDEOBUF2_DMA_SG
1090 help
1091 Say Y here if you want support for the Samsung SUR40 touchscreen
1092 (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1093
1094 To compile this driver as a module, choose M here: the
1095 module will be called sur40.
1096
1097config TOUCHSCREEN_SX8654
1098 tristate "Semtech SX8654 touchscreen"
1099 depends on I2C
1100 help
1101 Say Y here if you have a Semtech SX8654 touchscreen controller.
1102
1103 If unsure, say N
1104
1105 To compile this driver as a module, choose M here: the
1106 module will be called sx8654.
1107
1108config TOUCHSCREEN_TPS6507X
1109 tristate "TPS6507x based touchscreens"
1110 depends on I2C
1111 select INPUT_POLLDEV
1112 help
1113 Say Y here if you have a TPS6507x based touchscreen
1114 controller.
1115
1116 If unsure, say N.
1117
1118 To compile this driver as a module, choose M here: the
1119 module will be called tps6507x_ts.
1120
1121config TOUCHSCREEN_ZFORCE
1122 tristate "Neonode zForce infrared touchscreens"
1123 depends on I2C
1124 depends on GPIOLIB || COMPILE_TEST
1125 help
1126 Say Y here if you have a touchscreen using the zforce
1127 infraread technology from Neonode.
1128
1129 If unsure, say N.
1130
1131 To compile this driver as a module, choose M here: the
1132 module will be called zforce_ts.
1133
1134config TOUCHSCREEN_COLIBRI_VF50
1135 tristate "Toradex Colibri on board touchscreen driver"
1136 depends on IIO && VF610_ADC
1137 depends on GPIOLIB || COMPILE_TEST
1138 help
1139 Say Y here if you have a Colibri VF50 and plan to use
1140 the on-board provided 4-wire touchscreen driver.
1141
1142 If unsure, say N.
1143
1144 To compile this driver as a module, choose M here: the
1145 module will be called colibri_vf50_ts.
1146
1147config TOUCHSCREEN_ROHM_BU21023
1148 tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1149 depends on I2C
1150 help
1151 Say Y here if you have a touchscreen using ROHM BU21023/24.
1152
1153 If unsure, say N.
1154
1155 To compile this driver as a module, choose M here: the
1156 module will be called bu21023_ts.
1157
1158endif