1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# Touchscreen driver configuration
   4#
   5menuconfig INPUT_TOUCHSCREEN
   6	bool "Touchscreens"
   7	help
   8	  Say Y here, and a list of supported touchscreens will be displayed.
   9	  This option doesn't affect the kernel.
  10
  11	  If unsure, say Y.
  12
  13if INPUT_TOUCHSCREEN
  14
 
 
 
 
  15config TOUCHSCREEN_88PM860X
  16	tristate "Marvell 88PM860x touchscreen"
  17	depends on MFD_88PM860X
  18	help
  19	  Say Y here if you have a 88PM860x PMIC and want to enable
  20	  support for the built-in touchscreen.
  21
  22	  If unsure, say N.
  23
  24	  To compile this driver as a module, choose M here: the
  25	  module will be called 88pm860x-ts.
  26
  27config TOUCHSCREEN_ADS7846
  28	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  29	depends on SPI_MASTER
  30	depends on HWMON = n || HWMON
  31	help
  32	  Say Y here if you have a touchscreen interface using the
  33	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  34	  and your board-specific setup code includes that in its
  35	  table of SPI devices.
  36
  37	  If HWMON is selected, and the driver is told the reference voltage
  38	  on your board, you will also get hwmon interfaces for the voltage
  39	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  40
  41	  If unsure, say N (but it's safe to say "Y").
  42
  43	  To compile this driver as a module, choose M here: the
  44	  module will be called ads7846.
  45
  46config TOUCHSCREEN_AD7877
  47	tristate "AD7877 based touchscreens"
  48	depends on SPI_MASTER
  49	help
  50	  Say Y here if you have a touchscreen interface using the
  51	  AD7877 controller, and your board-specific initialization
  52	  code includes that in its table of SPI devices.
  53
  54	  If unsure, say N (but it's safe to say "Y").
  55
  56	  To compile this driver as a module, choose M here: the
  57	  module will be called ad7877.
  58
  59config TOUCHSCREEN_AD7879
  60	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  61	help
  62	  Say Y here if you want to support a touchscreen interface using
  63	  the AD7879-1/AD7889-1 controller.
  64
  65	  You should select a bus connection too.
  66
  67	  To compile this driver as a module, choose M here: the
  68	  module will be called ad7879.
  69
  70config TOUCHSCREEN_AD7879_I2C
  71	tristate "support I2C bus connection"
  72	depends on TOUCHSCREEN_AD7879 && I2C
  73	select REGMAP_I2C
  74	help
  75	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  76
  77	  To compile this driver as a module, choose M here: the
  78	  module will be called ad7879-i2c.
  79
  80config TOUCHSCREEN_AD7879_SPI
  81	tristate "support SPI bus connection"
  82	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  83	select REGMAP_SPI
  84	help
  85	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  86
  87	  If unsure, say N (but it's safe to say "Y").
  88
  89	  To compile this driver as a module, choose M here: the
  90	  module will be called ad7879-spi.
  91
  92config TOUCHSCREEN_ADC
  93	tristate "Generic ADC based resistive touchscreen"
  94	depends on IIO
  95	select IIO_BUFFER
  96	select IIO_BUFFER_CB
  97	help
  98	  Say Y here if you want to use the generic ADC
  99	  resistive touchscreen driver.
 100
 101	  If unsure, say N (but it's safe to say "Y").
 102
 103	  To compile this driver as a module, choose M here: the
 104	  module will be called resistive-adc-touch.ko.
 105
 106config TOUCHSCREEN_AR1021_I2C
 107	tristate "Microchip AR1020/1021 i2c touchscreen"
 108	depends on I2C && OF
 109	help
 110	  Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
 111	  controller chip in your system.
 112
 113	  If unsure, say N.
 114
 115	  To compile this driver as a module, choose M here: the
 116	  module will be called ar1021_i2c.
 117
 118config TOUCHSCREEN_ATMEL_MXT
 119	tristate "Atmel mXT I2C Touchscreen"
 120	depends on I2C
 121	select FW_LOADER
 122	help
 123	  Say Y here if you have Atmel mXT series I2C touchscreen,
 124	  such as AT42QT602240/ATMXT224, connected to your system.
 125
 126	  If unsure, say N.
 127
 128	  To compile this driver as a module, choose M here: the
 129	  module will be called atmel_mxt_ts.
 130
 131config TOUCHSCREEN_ATMEL_MXT_T37
 132	bool "Support T37 Diagnostic Data"
 133	depends on TOUCHSCREEN_ATMEL_MXT
 134	depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
 135	select VIDEOBUF2_VMALLOC
 136	help
 137	  Say Y here if you want support to output data from the T37
 138	  Diagnostic Data object using a V4L device.
 139
 140config TOUCHSCREEN_AUO_PIXCIR
 141	tristate "AUO in-cell touchscreen using Pixcir ICs"
 142	depends on I2C
 143	depends on GPIOLIB || COMPILE_TEST
 144	help
 145	  Say Y here if you have a AUO display with in-cell touchscreen
 146	  using Pixcir ICs.
 147
 148	  If unsure, say N.
 149
 150	  To compile this driver as a module, choose M here: the
 151	  module will be called auo-pixcir-ts.
 152
 153config TOUCHSCREEN_BU21013
 154	tristate "BU21013 based touch panel controllers"
 155	depends on I2C
 156	help
 157	  Say Y here if you have a bu21013 touchscreen connected to
 158	  your system.
 159
 160	  If unsure, say N.
 161
 162	  To compile this driver as a module, choose M here: the
 163	  module will be called bu21013_ts.
 164
 165config TOUCHSCREEN_BU21029
 166	tristate "Rohm BU21029 based touch panel controllers"
 167	depends on I2C
 168	help
 169	  Say Y here if you have a Rohm BU21029 touchscreen controller
 170	  connected to your system.
 171
 172	  If unsure, say N.
 173
 174	  To compile this driver as a module, choose M here: the
 175	  module will be called bu21029_ts.
 176
 177config TOUCHSCREEN_CHIPONE_ICN8318
 178	tristate "chipone icn8318 touchscreen controller"
 179	depends on GPIOLIB || COMPILE_TEST
 180	depends on I2C
 181	depends on OF
 182	help
 183	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 184
 185	  If unsure, say N.
 186
 187	  To compile this driver as a module, choose M here: the
 188	  module will be called chipone_icn8318.
 189
 190config TOUCHSCREEN_CHIPONE_ICN8505
 191	tristate "chipone icn8505 touchscreen controller"
 192	depends on I2C && ACPI
 193	help
 194	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
 195
 196	  If unsure, say N.
 197
 198	  To compile this driver as a module, choose M here: the
 199	  module will be called chipone_icn8505.
 200
 201config TOUCHSCREEN_CY8CTMA140
 202	tristate "cy8ctma140 touchscreen"
 203	depends on I2C
 204	help
 205	  Say Y here if you have a Cypress CY8CTMA140 capacitive
 206	  touchscreen also just known as "TMA140"
 207
 208	  If unsure, say N.
 209
 210	  To compile this driver as a module, choose M here: the
 211	  module will be called cy8ctma140.
 212
 213config TOUCHSCREEN_CY8CTMG110
 214	tristate "cy8ctmg110 touchscreen"
 215	depends on I2C
 216	depends on GPIOLIB || COMPILE_TEST
 217	help
 218	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 219	  an AAVA device.
 220
 221	  If unsure, say N.
 222
 223	  To compile this driver as a module, choose M here: the
 224	  module will be called cy8ctmg110_ts.
 225
 226config TOUCHSCREEN_CYTTSP_CORE
 227	tristate "Cypress TTSP touchscreen"
 228	help
 229	  Say Y here if you have a touchscreen using controller from
 230	  the Cypress TrueTouch(tm) Standard Product family connected
 231	  to your system. You will also need to select appropriate
 232	  bus connection below.
 233
 234	  If unsure, say N.
 235
 236	  To compile this driver as a module, choose M here: the
 237	  module will be called cyttsp_core.
 238
 239config TOUCHSCREEN_CYTTSP_I2C
 240	tristate "support I2C bus connection"
 241	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 242	help
 243	  Say Y here if the touchscreen is connected via I2C bus.
 244
 245	  To compile this driver as a module, choose M here: the
 246	  module will be called cyttsp_i2c.
 247
 248config TOUCHSCREEN_CYTTSP_SPI
 249	tristate "support SPI bus connection"
 250	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 251	help
 252	  Say Y here if the touchscreen is connected via SPI bus.
 253
 254	  To compile this driver as a module, choose M here: the
 255	  module will be called cyttsp_spi.
 256
 257config TOUCHSCREEN_CYTTSP5
 258	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
 259	depends on I2C
 260	select REGMAP_I2C
 261	select CRC_ITU_T
 262	help
 263	  Driver for Parade TrueTouch Standard Product Generation 5
 264	  touchscreen controllers. I2C bus interface support only.
 265
 266	  Say Y here if you have a Cypress Gen5 touchscreen.
 267
 268	  If unsure, say N.
 269
 
 
 
 
 
 
 
 
 270	  To compile this driver as a module, choose M here: the
 271	  module will be called cyttsp5.
 
 
 
 
 
 
 
 
 
 272
 273config TOUCHSCREEN_DA9034
 274	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 275	depends on PMIC_DA903X
 276	default y
 277	help
 278	  Say Y here to enable the support for the touchscreen found
 279	  on Dialog Semiconductor DA9034 PMIC.
 280
 281	  If unsure, say N.
 282
 283	  To compile this driver as a module, choose M here: the
 284	  module will be called da9034-ts.
 285
 286config TOUCHSCREEN_DA9052
 287	tristate "Dialog DA9052/DA9053 TSI"
 288	depends on PMIC_DA9052
 289	help
 290	  Say Y here to support the touchscreen found on Dialog Semiconductor
 291	  DA9052-BC and DA9053-AA/Bx PMICs.
 292
 293	  If unsure, say N.
 294
 295	  To compile this driver as a module, choose M here: the
 296	  module will be called da9052_tsi.
 297
 298config TOUCHSCREEN_DYNAPRO
 299	tristate "Dynapro serial touchscreen"
 300	select SERIO
 301	help
 302	  Say Y here if you have a Dynapro serial touchscreen connected to
 303	  your system.
 304
 305	  If unsure, say N.
 306
 307	  To compile this driver as a module, choose M here: the
 308	  module will be called dynapro.
 309
 310config TOUCHSCREEN_HAMPSHIRE
 311	tristate "Hampshire serial touchscreen"
 312	select SERIO
 313	help
 314	  Say Y here if you have a Hampshire serial touchscreen connected to
 315	  your system.
 316
 317	  If unsure, say N.
 318
 319	  To compile this driver as a module, choose M here: the
 320	  module will be called hampshire.
 321
 322config TOUCHSCREEN_EETI
 323	tristate "EETI touchscreen panel support"
 324	depends on I2C
 325	help
 326	  Say Y here to enable support for I2C connected EETI touch panels.
 327
 328	  To compile this driver as a module, choose M here: the
 329	  module will be called eeti_ts.
 330
 331config TOUCHSCREEN_EGALAX
 332	tristate "EETI eGalax multi-touch panel support"
 333	depends on I2C && OF
 334	help
 335	  Say Y here to enable support for I2C connected EETI
 336	  eGalax multi-touch panels.
 337
 338	  To compile this driver as a module, choose M here: the
 339	  module will be called egalax_ts.
 340
 341config TOUCHSCREEN_EGALAX_SERIAL
 342	tristate "EETI eGalax serial touchscreen"
 343	select SERIO
 344	help
 345	  Say Y here to enable support for serial connected EETI
 346	  eGalax touch panels.
 347
 348	  To compile this driver as a module, choose M here: the
 349	  module will be called egalax_ts_serial.
 350
 351config TOUCHSCREEN_EXC3000
 352	tristate "EETI EXC3000 multi-touch panel support"
 353	depends on I2C
 354	help
 355	  Say Y here to enable support for I2C connected EETI
 356	  EXC3000 multi-touch panels.
 357
 358	  To compile this driver as a module, choose M here: the
 359	  module will be called exc3000.
 360
 361config TOUCHSCREEN_FUJITSU
 362	tristate "Fujitsu serial touchscreen"
 363	select SERIO
 364	help
 365	  Say Y here if you have the Fujitsu touchscreen (such as one
 366	  installed in Lifebook P series laptop) connected to your
 367	  system.
 368
 369	  If unsure, say N.
 370
 371	  To compile this driver as a module, choose M here: the
 372	  module will be called fujitsu-ts.
 373
 374config TOUCHSCREEN_GOODIX
 375	tristate "Goodix I2C touchscreen"
 376	depends on I2C
 377	depends on GPIOLIB || COMPILE_TEST
 378	help
 379	  Say Y here if you have the Goodix touchscreen (such as one
 380	  installed in Onda v975w tablets) connected to your
 381	  system. It also supports 5-finger chip models, which can be
 382	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 383
 384	  If unsure, say N.
 385
 386	  To compile this driver as a module, choose M here: the
 387	  module will be called goodix.
 388
 389config TOUCHSCREEN_GOODIX_BERLIN_CORE
 390	tristate
 391
 392config TOUCHSCREEN_GOODIX_BERLIN_I2C
 393	tristate "Goodix Berlin I2C touchscreen"
 394	depends on I2C
 395	select REGMAP_I2C
 396	select TOUCHSCREEN_GOODIX_BERLIN_CORE
 397	help
 398	  Say Y here if you have a Goodix Berlin IC connected to
 399	  your system via I2C.
 400
 401	  If unsure, say N.
 402
 403	  To compile this driver as a module, choose M here: the
 404	  module will be called goodix_berlin_i2c.
 405
 406config TOUCHSCREEN_GOODIX_BERLIN_SPI
 407	tristate "Goodix Berlin SPI touchscreen"
 408	depends on SPI_MASTER
 409	select REGMAP
 410	select TOUCHSCREEN_GOODIX_BERLIN_CORE
 411	help
 412	  Say Y here if you have a Goodix Berlin IC connected to
 413	  your system via SPI.
 414
 415	  If unsure, say N.
 416
 417	  To compile this driver as a module, choose M here: the
 418	  module will be called goodix_berlin_spi.
 419
 420config TOUCHSCREEN_HIDEEP
 421	tristate "HiDeep Touch IC"
 422	depends on I2C
 423	select REGMAP_I2C
 424	help
 425	  Say Y here if you have a touchscreen using HiDeep.
 426
 427	  If unsure, say N.
 428
 429	  To compile this driver as a module, choose M here : the
 430	  module will be called hideep_ts.
 431
 432config TOUCHSCREEN_HYCON_HY46XX
 433	tristate "Hycon hy46xx touchscreen support"
 434	depends on I2C
 435	select REGMAP_I2C
 436	help
 437	  Say Y here if you have a touchscreen using Hycon hy46xx
 438
 439	  If unsure, say N.
 440
 441	  To compile this driver as a module, choose M here: the
 442	  module will be called hycon-hy46xx.
 443
 444config TOUCHSCREEN_HYNITRON_CSTXXX
 445	tristate "Hynitron touchscreen support"
 446	depends on I2C
 447	help
 448	  Say Y here if you have a touchscreen using a Hynitron
 449	  touchscreen controller.
 450
 451	  If unsure, say N.
 452
 453	  To compile this driver as a module, choose M here: the
 454	  module will be called hynitron-cstxxx.
 455
 456config TOUCHSCREEN_ILI210X
 457	tristate "Ilitek ILI210X based touchscreen"
 458	depends on I2C
 459	select CRC_CCITT
 460	help
 461	  Say Y here if you have a ILI210X based touchscreen
 462	  controller. This driver supports models ILI2102,
 463	  ILI2102s, ILI2103, ILI2103s and ILI2105.
 464	  Such kind of chipsets can be found in Amazon Kindle Fire
 465	  touchscreens.
 466
 467	  If unsure, say N.
 468
 469	  To compile this driver as a module, choose M here: the
 470	  module will be called ili210x.
 471
 472config TOUCHSCREEN_ILITEK
 473	tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
 474	depends on I2C
 475	help
 476	  Say Y here if you have touchscreen with ILITEK touch IC,
 477	  it supports 213X/23XX/25XX and other Lego series.
 478
 479	  If unsure, say N.
 480
 481	  To compile this driver as a module, choose M here: the
 482	  module will be called ilitek_ts_i2c.
 483
 484config TOUCHSCREEN_IPROC
 485	tristate "IPROC touch panel driver support"
 486	depends on ARCH_BCM_IPROC || COMPILE_TEST
 487	help
 488	  Say Y here if you want to add support for the IPROC touch
 489	  controller to your system.
 490
 491	  If unsure, say N.
 492
 493	  To compile this driver as a module, choose M here: the
 494	  module will be called bcm_iproc_tsc.
 495
 496config TOUCHSCREEN_S6SY761
 497	tristate "Samsung S6SY761 Touchscreen driver"
 498	depends on I2C
 
 499	help
 500	  Say Y if you have the Samsung S6SY761 driver
 501
 502	  If unsure, say N
 503
 504	  To compile this driver as module, choose M here: the
 505	  module will be called s6sy761.
 506
 507config TOUCHSCREEN_GUNZE
 508	tristate "Gunze AHL-51S touchscreen"
 509	select SERIO
 510	help
 511	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
 512	  your system.
 513
 514	  If unsure, say N.
 515
 516	  To compile this driver as a module, choose M here: the
 517	  module will be called gunze.
 518
 519config TOUCHSCREEN_EKTF2127
 520	tristate "Elan eKTF2127 I2C touchscreen"
 521	depends on I2C
 522	help
 523	  Say Y here if you have an Elan eKTF2127 touchscreen
 524	  connected to your system.
 525
 526	  If unsure, say N.
 527
 528	  To compile this driver as a module, choose M here: the
 529	  module will be called ektf2127.
 530
 531config TOUCHSCREEN_ELAN
 532	tristate "Elan eKTH I2C touchscreen"
 533	depends on I2C
 534	help
 535	  Say Y here if you have an Elan eKTH I2C touchscreen
 536	  connected to your system.
 537
 538	  If unsure, say N.
 539
 540	  To compile this driver as a module, choose M here: the
 541	  module will be called elants_i2c.
 542
 543config TOUCHSCREEN_ELO
 544	tristate "Elo serial touchscreens"
 545	select SERIO
 546	help
 547	  Say Y here if you have an Elo serial touchscreen connected to
 548	  your system.
 549
 550	  If unsure, say N.
 551
 552	  To compile this driver as a module, choose M here: the
 553	  module will be called elo.
 554
 555config TOUCHSCREEN_WACOM_W8001
 556	tristate "Wacom W8001 penabled serial touchscreen"
 557	select SERIO
 558	help
 559	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
 560	  connected to your system.
 561
 562	  If unsure, say N.
 563
 564	  To compile this driver as a module, choose M here: the
 565	  module will be called wacom_w8001.
 566
 567config TOUCHSCREEN_WACOM_I2C
 568	tristate "Wacom Tablet support (I2C)"
 569	depends on I2C
 570	help
 571	  Say Y here if you want to use the I2C version of the Wacom
 572	  Pen Tablet.
 573
 574	  If unsure, say N.
 575
 576	  To compile this driver as a module, choose M here: the module
 577	  will be called wacom_i2c.
 578
 579config TOUCHSCREEN_LPC32XX
 580	tristate "LPC32XX touchscreen controller"
 581	depends on ARCH_LPC32XX
 582	help
 583	  Say Y here if you have a LPC32XX device and want
 584	  to support the built-in touchscreen.
 585
 586	  To compile this driver as a module, choose M here: the
 587	  module will be called lpc32xx_ts.
 588
 589config TOUCHSCREEN_MAX11801
 590	tristate "MAX11801 based touchscreens"
 591	depends on I2C
 592	help
 593	  Say Y here if you have a MAX11801 based touchscreen
 594	  controller.
 595
 596	  If unsure, say N.
 597
 598	  To compile this driver as a module, choose M here: the
 599	  module will be called max11801_ts.
 600
 
 
 
 
 
 
 
 
 
 
 
 
 601config TOUCHSCREEN_MMS114
 602	tristate "MELFAS MMS114 touchscreen"
 603	depends on I2C
 604	help
 605	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 606	  chip in your system.
 607
 608	  If unsure, say N.
 609
 610	  To compile this driver as a module, choose M here: the
 611	  module will be called mms114.
 612
 613config TOUCHSCREEN_MELFAS_MIP4
 614	tristate "MELFAS MIP4 Touchscreen"
 615	depends on I2C
 616	help
 617	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
 618
 619	  If unsure, say N.
 620
 621	  To compile this driver as a module, choose M here:
 622	  the module will be called melfas_mip4.
 623
 624config TOUCHSCREEN_MSG2638
 625	tristate "MStar msg2638 touchscreen support"
 626	depends on I2C
 627	depends on GPIOLIB || COMPILE_TEST
 628	help
 629	  Say Y here if you have an I2C touchscreen using MStar msg2638.
 630
 631	  If unsure, say N.
 632
 633	  To compile this driver as a module, choose M here: the
 634	  module will be called msg2638.
 635
 636config TOUCHSCREEN_MTOUCH
 637	tristate "MicroTouch serial touchscreens"
 638	select SERIO
 639	help
 640	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 641	  your system.
 642
 643	  If unsure, say N.
 644
 645	  To compile this driver as a module, choose M here: the
 646	  module will be called mtouch.
 647
 648config TOUCHSCREEN_NOVATEK_NVT_TS
 649	tristate "Novatek NT11205 touchscreen support"
 650	depends on I2C
 651	help
 652	  Say Y here if you have a Novatek NT11205 touchscreen.
 653	  If unsure, say N.
 654
 655	  To compile this driver as a module, choose M here: the
 656	  module will be called novatek-nvt-ts.
 657
 658config TOUCHSCREEN_IMAGIS
 659	tristate "Imagis touchscreen support"
 660	depends on I2C
 661	help
 662	  Say Y here if you have an Imagis IST30xxC touchscreen.
 663	  If unsure, say N.
 664
 665	  To compile this driver as a module, choose M here: the
 666	  module will be called imagis.
 667
 668config TOUCHSCREEN_IMX6UL_TSC
 669	tristate "Freescale i.MX6UL touchscreen controller"
 670	depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
 671	help
 672	  Say Y here if you have a Freescale i.MX6UL, and want to
 673	  use the internal touchscreen controller.
 674
 675	  If unsure, say N.
 676
 677	  To compile this driver as a module, choose M here: the
 678	  module will be called imx6ul_tsc.
 679
 680config TOUCHSCREEN_INEXIO
 681	tristate "iNexio serial touchscreens"
 682	select SERIO
 683	help
 684	  Say Y here if you have an iNexio serial touchscreen connected to
 685	  your system.
 686
 687	  If unsure, say N.
 688
 689	  To compile this driver as a module, choose M here: the
 690	  module will be called inexio.
 691
 
 
 
 
 
 
 
 
 
 
 
 
 692config TOUCHSCREEN_MK712
 693	tristate "ICS MicroClock MK712 touchscreen"
 694	depends on ISA
 695	help
 696	  Say Y here if you have the ICS MicroClock MK712 touchscreen
 697	  controller chip in your system.
 698
 699	  If unsure, say N.
 700
 701	  To compile this driver as a module, choose M here: the
 702	  module will be called mk712.
 703
 704config TOUCHSCREEN_HP600
 705	tristate "HP Jornada 6xx touchscreen"
 706	depends on SH_HP6XX && SH_ADC
 707	help
 708	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
 709	  support the built-in touchscreen.
 710
 711	  To compile this driver as a module, choose M here: the
 712	  module will be called hp680_ts_input.
 713
 714config TOUCHSCREEN_HP7XX
 715	tristate "HP Jornada 7xx touchscreen"
 716	depends on SA1100_JORNADA720_SSP
 717	help
 718	  Say Y here if you have a HP Jornada 710/720/728 and want
 719	  to support the built-in touchscreen.
 720
 721	  To compile this driver as a module, choose M here: the
 722	  module will be called jornada720_ts.
 723
 724config TOUCHSCREEN_IPAQ_MICRO
 725	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 726	depends on MFD_IPAQ_MICRO
 727	help
 728	  Say Y here to enable support for the touchscreen attached to
 729	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 730
 731	  If unsure, say N.
 732
 733	  To compile this driver as a module, choose M here: the
 734	  module will be called ipaq-micro-ts.
 735
 736config TOUCHSCREEN_HTCPEN
 737	tristate "HTC Shift X9500 touchscreen"
 738	depends on ISA
 739	help
 740	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 741	  Clio / Shangrila and want to support the built-in touchscreen.
 742
 743	  If unsure, say N.
 744
 745	  To compile this driver as a module, choose M here: the
 746	  module will be called htcpen.
 747
 748config TOUCHSCREEN_PENMOUNT
 749	tristate "Penmount serial touchscreen"
 750	select SERIO
 751	help
 752	  Say Y here if you have a Penmount serial touchscreen connected to
 753	  your system.
 754
 755	  If unsure, say N.
 756
 757	  To compile this driver as a module, choose M here: the
 758	  module will be called penmount.
 759
 760config TOUCHSCREEN_EDT_FT5X06
 761	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 762	depends on I2C
 763	select REGMAP_I2C
 764	help
 765	  Say Y here if you have an EDT "Polytouch" touchscreen based
 766	  on the FocalTech FT5x06 family of controllers connected to
 767	  your system.
 768
 769	  If unsure, say N.
 770
 771	  To compile this driver as a module, choose M here: the
 772	  module will be called edt-ft5x06.
 773
 774config TOUCHSCREEN_RASPBERRYPI_FW
 775	tristate "Raspberry Pi's firmware base touch screen support"
 776	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
 777	help
 778	  Say Y here if you have the official Raspberry Pi 7 inch screen on
 779	  your system.
 780
 781	  If unsure, say N.
 782
 783	  To compile this driver as a module, choose M here: the
 784	  module will be called raspberrypi-ts.
 785
 786config TOUCHSCREEN_MIGOR
 787	tristate "Renesas MIGO-R touchscreen"
 788	depends on (SH_MIGOR || COMPILE_TEST) && I2C
 789	help
 790	  Say Y here to enable MIGO-R touchscreen support.
 791
 792	  If unsure, say N.
 793
 794	  To compile this driver as a module, choose M here: the
 795	  module will be called migor_ts.
 796
 797config TOUCHSCREEN_TOUCHRIGHT
 798	tristate "Touchright serial touchscreen"
 799	select SERIO
 800	help
 801	  Say Y here if you have a Touchright serial touchscreen connected to
 802	  your system.
 803
 804	  If unsure, say N.
 805
 806	  To compile this driver as a module, choose M here: the
 807	  module will be called touchright.
 808
 809config TOUCHSCREEN_TOUCHWIN
 810	tristate "Touchwin serial touchscreen"
 811	select SERIO
 812	help
 813	  Say Y here if you have a Touchwin serial touchscreen connected to
 814	  your system.
 815
 816	  If unsure, say N.
 817
 818	  To compile this driver as a module, choose M here: the
 819	  module will be called touchwin.
 820
 821config TOUCHSCREEN_TI_AM335X_TSC
 822	tristate "TI Touchscreen Interface"
 823	depends on MFD_TI_AM335X_TSCADC
 824	help
 825	  Say Y here if you have 4/5/8 wire touchscreen controller
 826	  to be connected to the ADC controller on your TI AM335x SoC.
 827
 828	  If unsure, say N.
 829
 830	  To compile this driver as a module, choose M here: the
 831	  module will be called ti_am335x_tsc.
 832
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 833config TOUCHSCREEN_PIXCIR
 834	tristate "PIXCIR I2C touchscreens"
 835	depends on I2C
 836	help
 837	  Say Y here if you have a pixcir i2c touchscreen
 838	  controller.
 839
 840	  If unsure, say N.
 841
 842	  To compile this driver as a module, choose M here: the
 843	  module will be called pixcir_i2c_ts.
 844
 845config TOUCHSCREEN_WDT87XX_I2C
 846	tristate "Weida HiTech I2C touchscreen"
 847	depends on I2C
 848	help
 849	  Say Y here if you have a Weida WDT87XX I2C touchscreen
 850	  connected to your system.
 851
 852	  If unsure, say N.
 853
 854	  To compile this driver as a module, choose M here: the
 855	  module will be called wdt87xx_i2c.
 856
 857config TOUCHSCREEN_WM831X
 858	tristate "Support for WM831x touchscreen controllers"
 859	depends on MFD_WM831X
 860	help
 861	  This enables support for the touchscreen controller on the WM831x
 862	  series of PMICs.
 863
 864	  To compile this driver as a module, choose M here: the
 865	  module will be called wm831x-ts.
 866
 867config TOUCHSCREEN_WM97XX
 868	tristate "Support for WM97xx AC97 touchscreen controllers"
 869	depends on AC97_BUS || AC97_BUS_NEW
 870	help
 871	  Say Y here if you have a Wolfson Microelectronics WM97xx
 872	  touchscreen connected to your system. Note that this option
 873	  only enables core driver, you will also need to select
 874	  support for appropriate chip below.
 875
 876	  If unsure, say N.
 877
 878	  To compile this driver as a module, choose M here: the
 879	  module will be called wm97xx-ts.
 880
 881config TOUCHSCREEN_WM9705
 882	bool "WM9705 Touchscreen interface support"
 883	depends on TOUCHSCREEN_WM97XX
 884	default y
 885	help
 886	  Say Y here to enable support for the Wolfson Microelectronics
 887	  WM9705 touchscreen controller.
 888
 889config TOUCHSCREEN_WM9712
 890	bool "WM9712 Touchscreen interface support"
 891	depends on TOUCHSCREEN_WM97XX
 892	default y
 893	help
 894	  Say Y here to enable support for the Wolfson Microelectronics
 895	  WM9712 touchscreen controller.
 896
 897config TOUCHSCREEN_WM9713
 898	bool "WM9713 Touchscreen interface support"
 899	depends on TOUCHSCREEN_WM97XX
 900	default y
 901	help
 902	  Say Y here to enable support for the Wolfson Microelectronics
 903	  WM9713 touchscreen controller.
 904
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 905config TOUCHSCREEN_WM97XX_MAINSTONE
 906	tristate "WM97xx Mainstone/Palm accelerated touch"
 907	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 908	depends on SND_PXA2XX_LIB_AC97
 909	help
 910	  Say Y here for support for streaming mode with WM97xx touchscreens
 911	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 912
 913	  If unsure, say N.
 914
 915	  To compile this driver as a module, choose M here: the
 916	  module will be called mainstone-wm97xx.
 917
 
 
 
 
 
 
 
 
 
 
 
 
 
 918config TOUCHSCREEN_USB_COMPOSITE
 919	tristate "USB Touchscreen Driver"
 920	depends on USB_ARCH_HAS_HCD
 921	select USB
 922	help
 923	  USB Touchscreen driver for:
 924	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 925	  - PanJit TouchSet USB
 926	  - 3M MicroTouch USB (EX II series)
 927	  - ITM
 928	  - some other eTurboTouch
 929	  - Gunze AHL61
 930	  - DMC TSC-10/25
 931	  - IRTOUCHSYSTEMS/UNITOP
 932	  - IdealTEK URTC1000
 933	  - GoTop Super_Q2/GogoPen/PenPower tablets
 934	  - JASTEC USB Touch Controller/DigiTech DTR-02U
 935	  - Zytronic controllers
 936	  - Elo TouchSystems 2700 IntelliTouch
 937	  - EasyTouch USB Touch Controller from Data Module
 938	  - e2i (Mimo monitors)
 939
 940	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 941	  a usage description and the required user-space stuff.
 942
 943	  To compile this driver as a module, choose M here: the
 944	  module will be called usbtouchscreen.
 945
 946config TOUCHSCREEN_MXS_LRADC
 947	tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
 948	depends on MFD_MXS_LRADC
 949	help
 950	  Say Y here if you have a touchscreen connected to the low-resolution
 951	  analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
 952
 953	  To compile this driver as a module, choose M here: the module will be
 954	  called mxs-lradc-ts.
 955
 956config TOUCHSCREEN_MX25
 957	tristate "Freescale i.MX25 touchscreen input driver"
 958	depends on MFD_MX25_TSADC
 959	help
 960	  Enable support for touchscreen connected to your i.MX25.
 961
 962	  To compile this driver as a module, choose M here: the
 963	  module will be called fsl-imx25-tcq.
 964
 965config TOUCHSCREEN_MC13783
 966	tristate "Freescale MC13783 touchscreen input driver"
 967	depends on MFD_MC13XXX
 968	help
 969	  Say Y here if you have an Freescale MC13783 PMIC on your
 970	  board and want to use its touchscreen
 971
 972	  If unsure, say N.
 973
 974	  To compile this driver as a module, choose M here: the
 975	  module will be called mc13783_ts.
 976
 977config TOUCHSCREEN_USB_EGALAX
 978	default y
 979	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 980	depends on TOUCHSCREEN_USB_COMPOSITE
 981
 982config TOUCHSCREEN_USB_PANJIT
 983	default y
 984	bool "PanJit device support" if EXPERT
 985	depends on TOUCHSCREEN_USB_COMPOSITE
 986
 987config TOUCHSCREEN_USB_3M
 988	default y
 989	bool "3M/Microtouch EX II series device support" if EXPERT
 990	depends on TOUCHSCREEN_USB_COMPOSITE
 991
 992config TOUCHSCREEN_USB_ITM
 993	default y
 994	bool "ITM device support" if EXPERT
 995	depends on TOUCHSCREEN_USB_COMPOSITE
 996
 997config TOUCHSCREEN_USB_ETURBO
 998	default y
 999	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1000	depends on TOUCHSCREEN_USB_COMPOSITE
1001
1002config TOUCHSCREEN_USB_GUNZE
1003	default y
1004	bool "Gunze AHL61 device support" if EXPERT
1005	depends on TOUCHSCREEN_USB_COMPOSITE
1006
1007config TOUCHSCREEN_USB_DMC_TSC10
1008	default y
1009	bool "DMC TSC-10/25 device support" if EXPERT
1010	depends on TOUCHSCREEN_USB_COMPOSITE
1011
1012config TOUCHSCREEN_USB_IRTOUCH
1013	default y
1014	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1015	depends on TOUCHSCREEN_USB_COMPOSITE
1016
1017config TOUCHSCREEN_USB_IDEALTEK
1018	default y
1019	bool "IdealTEK URTC1000 device support" if EXPERT
1020	depends on TOUCHSCREEN_USB_COMPOSITE
1021
1022config TOUCHSCREEN_USB_GENERAL_TOUCH
1023	default y
1024	bool "GeneralTouch Touchscreen device support" if EXPERT
1025	depends on TOUCHSCREEN_USB_COMPOSITE
1026
1027config TOUCHSCREEN_USB_GOTOP
1028	default y
1029	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1030	depends on TOUCHSCREEN_USB_COMPOSITE
1031
1032config TOUCHSCREEN_USB_JASTEC
1033	default y
1034	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1035	depends on TOUCHSCREEN_USB_COMPOSITE
1036
1037config TOUCHSCREEN_USB_ELO
1038	default y
1039	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1040	depends on TOUCHSCREEN_USB_COMPOSITE
1041
1042config TOUCHSCREEN_USB_E2I
1043	default y
1044	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1045	depends on TOUCHSCREEN_USB_COMPOSITE
1046
1047config TOUCHSCREEN_USB_ZYTRONIC
1048	default y
1049	bool "Zytronic controller" if EXPERT
1050	depends on TOUCHSCREEN_USB_COMPOSITE
1051
1052config TOUCHSCREEN_USB_ETT_TC45USB
1053	default y
1054	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1055	depends on TOUCHSCREEN_USB_COMPOSITE
1056
1057config TOUCHSCREEN_USB_NEXIO
1058	default y
1059	bool "NEXIO/iNexio device support" if EXPERT
1060	depends on TOUCHSCREEN_USB_COMPOSITE
1061
1062config TOUCHSCREEN_USB_EASYTOUCH
1063	default y
1064	bool "EasyTouch USB Touch controller device support" if EXPERT
1065	depends on TOUCHSCREEN_USB_COMPOSITE
1066	help
1067	  Say Y here if you have an EasyTouch USB Touch controller.
1068	  If unsure, say N.
1069
1070config TOUCHSCREEN_TOUCHIT213
1071	tristate "Sahara TouchIT-213 touchscreen"
1072	select SERIO
1073	help
1074	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1075
1076	  If unsure, say N.
1077
1078	  To compile this driver as a module, choose M here: the
1079	  module will be called touchit213.
1080
1081config TOUCHSCREEN_TS4800
1082	tristate "TS-4800 touchscreen"
1083	depends on HAS_IOMEM && OF
1084	depends on SOC_IMX51 || COMPILE_TEST
1085	select MFD_SYSCON
 
1086	help
1087	  Say Y here if you have a touchscreen on a TS-4800 board.
1088
1089	  On TS-4800, the touchscreen is not handled directly by Linux but by
1090	  a companion FPGA.
1091
1092	  If unsure, say N.
1093
1094	  To compile this driver as a module, choose M here: the
1095	  module will be called ts4800_ts.
1096
1097config TOUCHSCREEN_TSC_SERIO
1098	tristate "TSC-10/25/40 serial touchscreen support"
1099	select SERIO
1100	help
1101	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1102	  to your system.
1103
1104	  If unsure, say N.
1105
1106	  To compile this driver as a module, choose M here: the
1107	  module will be called tsc40.
1108
1109config TOUCHSCREEN_TSC200X_CORE
1110	tristate
1111
1112config TOUCHSCREEN_TSC2004
1113	tristate "TSC2004 based touchscreens"
1114	depends on I2C
1115	select REGMAP_I2C
1116	select TOUCHSCREEN_TSC200X_CORE
1117	help
1118	  Say Y here if you have a TSC2004 based touchscreen.
1119
1120	  If unsure, say N.
1121
1122	  To compile this driver as a module, choose M here: the
1123	  module will be called tsc2004.
1124
1125config TOUCHSCREEN_TSC2005
1126	tristate "TSC2005 based touchscreens"
1127	depends on SPI_MASTER
1128	select REGMAP_SPI
1129	select TOUCHSCREEN_TSC200X_CORE
1130	help
1131	  Say Y here if you have a TSC2005 based touchscreen.
1132
1133	  If unsure, say N.
1134
1135	  To compile this driver as a module, choose M here: the
1136	  module will be called tsc2005.
1137
1138config TOUCHSCREEN_TSC2007
1139	tristate "TSC2007 based touchscreens"
1140	depends on I2C
1141	help
1142	  Say Y here if you have a TSC2007 based touchscreen.
1143
1144	  If unsure, say N.
1145
1146	  To compile this driver as a module, choose M here: the
1147	  module will be called tsc2007.
1148
1149config TOUCHSCREEN_TSC2007_IIO
1150	bool "IIO interface for external ADC input and temperature"
1151	depends on TOUCHSCREEN_TSC2007
1152	depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1153	help
1154	  Saying Y here adds an iio interface to the tsc2007 which
1155	  provides values for the AUX input (used for e.g. battery
1156	  or ambient light monitoring), temperature and raw input
1157	  values.
1158
1159config TOUCHSCREEN_PCAP
1160	tristate "Motorola PCAP touchscreen"
1161	depends on EZX_PCAP
1162	help
1163	  Say Y here if you have a Motorola EZX telephone and
1164	  want to enable support for the built-in touchscreen.
1165
1166	  To compile this driver as a module, choose M here: the
1167	  module will be called pcap_ts.
1168
1169config TOUCHSCREEN_RM_TS
1170	tristate "Raydium I2C Touchscreen"
1171	depends on I2C
1172	depends on GPIOLIB || COMPILE_TEST
1173	help
1174	  Say Y here if you have Raydium series I2C touchscreen,
1175	  such as RM32380, connected to your system.
1176
1177	  If unsure, say N.
1178
1179	  To compile this driver as a module, choose M here: the
1180	  module will be called raydium_i2c_ts.
1181
1182config TOUCHSCREEN_SILEAD
1183	tristate "Silead I2C touchscreen"
1184	depends on I2C
1185	help
1186	  Say Y here if you have the Silead touchscreen connected to
1187	  your system.
1188
1189	  If unsure, say N.
1190
1191	  To compile this driver as a module, choose M here: the
1192	  module will be called silead.
1193
1194config TOUCHSCREEN_SIS_I2C
1195	tristate "SiS 9200 family I2C touchscreen"
1196	depends on I2C
1197	select CRC_ITU_T
1198	depends on GPIOLIB || COMPILE_TEST
1199	help
1200	  This enables support for SiS 9200 family over I2C based touchscreens.
1201
1202	  If unsure, say N.
1203
1204	  To compile this driver as a module, choose M here: the
1205	  module will be called sis_i2c.
1206
1207config TOUCHSCREEN_ST1232
1208	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1209	depends on I2C
1210	help
1211	  Say Y here if you want to support the Sitronix ST1232
1212	  or ST1633 touchscreen controller.
1213
1214	  If unsure, say N.
1215
1216	  To compile this driver as a module, choose M here: the
1217	  module will be called st1232_ts.
1218
1219config TOUCHSCREEN_STMFTS
1220	tristate "STMicroelectronics STMFTS touchscreen"
1221	depends on I2C
1222	depends on LEDS_CLASS
1223	help
1224	  Say Y here if you want support for STMicroelectronics
1225	  STMFTS touchscreen.
1226
1227	  To compile this driver as a module, choose M here: the
1228	  module will be called stmfts.
1229
1230config TOUCHSCREEN_STMPE
1231	tristate "STMicroelectronics STMPE touchscreens"
1232	depends on MFD_STMPE
1233	depends on OF
1234	help
1235	  Say Y here if you want support for STMicroelectronics
1236	  STMPE touchscreen controllers.
1237
1238	  To compile this driver as a module, choose M here: the
1239	  module will be called stmpe-ts.
1240
1241config TOUCHSCREEN_SUN4I
1242	tristate "Allwinner sun4i resistive touchscreen controller support"
1243	depends on ARCH_SUNXI || COMPILE_TEST
1244	depends on HWMON
1245	depends on THERMAL || !THERMAL_OF
1246	help
1247	  This selects support for the resistive touchscreen controller
1248	  found on Allwinner sunxi SoCs.
1249
1250	  To compile this driver as a module, choose M here: the
1251	  module will be called sun4i-ts.
1252
1253config TOUCHSCREEN_SUR40
1254	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1255	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1256	depends on VIDEO_DEV
 
1257	select VIDEOBUF2_DMA_SG
1258	help
1259	  Say Y here if you want support for the Samsung SUR40 touchscreen
1260	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1261
1262	  To compile this driver as a module, choose M here: the
1263	  module will be called sur40.
1264
1265config TOUCHSCREEN_SURFACE3_SPI
1266	tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1267	depends on SPI
1268	depends on GPIOLIB || COMPILE_TEST
1269	help
1270	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1271	  controller chip as found on the Surface 3 in your system.
1272
1273	  If unsure, say N.
1274
1275	  To compile this driver as a module, choose M here: the
1276	  module will be called surface3_spi.
1277
1278config TOUCHSCREEN_SX8654
1279	tristate "Semtech SX8654 touchscreen"
1280	depends on I2C
1281	help
1282	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1283
1284	  If unsure, say N
1285
1286	  To compile this driver as a module, choose M here: the
1287	  module will be called sx8654.
1288
1289config TOUCHSCREEN_TPS6507X
1290	tristate "TPS6507x based touchscreens"
1291	depends on I2C
 
1292	help
1293	  Say Y here if you have a TPS6507x based touchscreen
1294	  controller.
1295
1296	  If unsure, say N.
1297
1298	  To compile this driver as a module, choose M here: the
1299	  module will be called tps6507x_ts.
1300
1301config TOUCHSCREEN_ZET6223
1302	tristate "Zeitec ZET6223 touchscreen driver"
1303	depends on I2C
1304	help
1305	  Say Y here if you have a touchscreen using Zeitec ZET6223
1306
1307	  If unsure, say N.
1308
1309	  To compile this driver as a module, choose M here: the
1310	  module will be called zet6223.
1311
1312config TOUCHSCREEN_ZFORCE
1313	tristate "Neonode zForce infrared touchscreens"
1314	depends on I2C
1315	depends on GPIOLIB || COMPILE_TEST
1316	help
1317	  Say Y here if you have a touchscreen using the zforce
1318	  infraread technology from Neonode.
1319
1320	  If unsure, say N.
1321
1322	  To compile this driver as a module, choose M here: the
1323	  module will be called zforce_ts.
1324
1325config TOUCHSCREEN_COLIBRI_VF50
1326	tristate "Toradex Colibri on board touchscreen driver"
1327	depends on IIO
1328	depends on GPIOLIB || COMPILE_TEST
1329	help
1330	  Say Y here if you have a Colibri VF50 and plan to use
1331	  the on-board provided 4-wire touchscreen driver.
1332
1333	  If unsure, say N.
1334
1335	  To compile this driver as a module, choose M here: the
1336	  module will be called colibri_vf50_ts.
1337
1338config TOUCHSCREEN_ROHM_BU21023
1339	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1340	depends on I2C
1341	help
1342	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1343
1344	  If unsure, say N.
1345
1346	  To compile this driver as a module, choose M here: the
1347	  module will be called bu21023_ts.
1348
1349config TOUCHSCREEN_IQS5XX
1350	tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1351	depends on I2C
1352	help
1353	  Say Y to enable support for the Azoteq IQS550/572/525
1354	  family of trackpad/touchscreen controllers.
1355
1356	  To compile this driver as a module, choose M here: the
1357	  module will be called iqs5xx.
1358
1359config TOUCHSCREEN_IQS7211
1360	tristate "Azoteq IQS7210A/7211A/E trackpad/touchscreen controller"
1361	depends on I2C
1362	help
1363	  Say Y to enable support for the Azoteq IQS7210A/7211A/E
1364	  family of trackpad/touchscreen controllers.
1365
1366	  To compile this driver as a module, choose M here: the
1367	  module will be called iqs7211.
1368
1369config TOUCHSCREEN_ZINITIX
1370	tristate "Zinitix touchscreen support"
1371	depends on I2C
1372	help
1373	  Say Y here if you have a touchscreen using Zinitix bt541,
1374	  or something similar enough.
1375
1376	  If unsure, say N.
1377
1378	  To compile this driver as a module, choose M here: the
1379	  module will be called zinitix.
1380
1381config TOUCHSCREEN_HIMAX_HX83112B
1382	tristate "Himax hx83112b touchscreen driver"
1383	depends on I2C
1384	select REGMAP_I2C
1385	help
1386	  Say Y here to enable support for Himax hx83112b touchscreens.
1387
1388	  If unsure, say N.
1389
1390	  To compile this driver as a module, choose M here: the
1391	  module will be called himax_hx83112b.
1392
1393endif

 
   1#
   2# Touchscreen driver configuration
   3#
   4menuconfig INPUT_TOUCHSCREEN
   5	bool "Touchscreens"
   6	help
   7	  Say Y here, and a list of supported touchscreens will be displayed.
   8	  This option doesn't affect the kernel.
   9
  10	  If unsure, say Y.
  11
  12if INPUT_TOUCHSCREEN
  13
  14config TOUCHSCREEN_PROPERTIES
  15	def_tristate INPUT
  16	depends on INPUT
  17
  18config TOUCHSCREEN_88PM860X
  19	tristate "Marvell 88PM860x touchscreen"
  20	depends on MFD_88PM860X
  21	help
  22	  Say Y here if you have a 88PM860x PMIC and want to enable
  23	  support for the built-in touchscreen.
  24
  25	  If unsure, say N.
  26
  27	  To compile this driver as a module, choose M here: the
  28	  module will be called 88pm860x-ts.
  29
  30config TOUCHSCREEN_ADS7846
  31	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  32	depends on SPI_MASTER
  33	depends on HWMON = n || HWMON
  34	help
  35	  Say Y here if you have a touchscreen interface using the
  36	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  37	  and your board-specific setup code includes that in its
  38	  table of SPI devices.
  39
  40	  If HWMON is selected, and the driver is told the reference voltage
  41	  on your board, you will also get hwmon interfaces for the voltage
  42	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  43
  44	  If unsure, say N (but it's safe to say "Y").
  45
  46	  To compile this driver as a module, choose M here: the
  47	  module will be called ads7846.
  48
  49config TOUCHSCREEN_AD7877
  50	tristate "AD7877 based touchscreens"
  51	depends on SPI_MASTER
  52	help
  53	  Say Y here if you have a touchscreen interface using the
  54	  AD7877 controller, and your board-specific initialization
  55	  code includes that in its table of SPI devices.
  56
  57	  If unsure, say N (but it's safe to say "Y").
  58
  59	  To compile this driver as a module, choose M here: the
  60	  module will be called ad7877.
  61
  62config TOUCHSCREEN_AD7879
  63	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  64	help
  65	  Say Y here if you want to support a touchscreen interface using
  66	  the AD7879-1/AD7889-1 controller.
  67
  68	  You should select a bus connection too.
  69
  70	  To compile this driver as a module, choose M here: the
  71	  module will be called ad7879.
  72
  73config TOUCHSCREEN_AD7879_I2C
  74	tristate "support I2C bus connection"
  75	depends on TOUCHSCREEN_AD7879 && I2C
 
  76	help
  77	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  78
  79	  To compile this driver as a module, choose M here: the
  80	  module will be called ad7879-i2c.
  81
  82config TOUCHSCREEN_AD7879_SPI
  83	tristate "support SPI bus connection"
  84	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
 
  85	help
  86	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  87
  88	  If unsure, say N (but it's safe to say "Y").
  89
  90	  To compile this driver as a module, choose M here: the
  91	  module will be called ad7879-spi.
  92
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  93config TOUCHSCREEN_AR1021_I2C
  94	tristate "Microchip AR1021 i2c touchscreen"
  95	depends on I2C && OF
  96	help
  97	  Say Y here if you have the Microchip AR1021 touchscreen controller
  98	  chip in your system.
  99
 100	  If unsure, say N.
 101
 102	  To compile this driver as a module, choose M here: the
 103	  module will be called ar1021_i2c.
 104
 105config TOUCHSCREEN_ATMEL_MXT
 106	tristate "Atmel mXT I2C Touchscreen"
 107	depends on I2C
 108	select FW_LOADER
 109	help
 110	  Say Y here if you have Atmel mXT series I2C touchscreen,
 111	  such as AT42QT602240/ATMXT224, connected to your system.
 112
 113	  If unsure, say N.
 114
 115	  To compile this driver as a module, choose M here: the
 116	  module will be called atmel_mxt_ts.
 117
 118config TOUCHSCREEN_ATMEL_MXT_T37
 119	bool "Support T37 Diagnostic Data"
 120	depends on TOUCHSCREEN_ATMEL_MXT
 121	depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m)
 122	select VIDEOBUF2_VMALLOC
 123	help
 124	  Say Y here if you want support to output data from the T37
 125	  Diagnostic Data object using a V4L device.
 126
 127config TOUCHSCREEN_AUO_PIXCIR
 128	tristate "AUO in-cell touchscreen using Pixcir ICs"
 129	depends on I2C
 130	depends on GPIOLIB || COMPILE_TEST
 131	help
 132	  Say Y here if you have a AUO display with in-cell touchscreen
 133	  using Pixcir ICs.
 134
 135	  If unsure, say N.
 136
 137	  To compile this driver as a module, choose M here: the
 138	  module will be called auo-pixcir-ts.
 139
 140config TOUCHSCREEN_BU21013
 141	tristate "BU21013 based touch panel controllers"
 142	depends on I2C
 143	help
 144	  Say Y here if you have a bu21013 touchscreen connected to
 145	  your system.
 146
 147	  If unsure, say N.
 148
 149	  To compile this driver as a module, choose M here: the
 150	  module will be called bu21013_ts.
 151
 
 
 
 
 
 
 
 
 
 
 
 
 152config TOUCHSCREEN_CHIPONE_ICN8318
 153	tristate "chipone icn8318 touchscreen controller"
 154	depends on GPIOLIB || COMPILE_TEST
 155	depends on I2C
 156	depends on OF
 157	help
 158	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 159
 160	  If unsure, say N.
 161
 162	  To compile this driver as a module, choose M here: the
 163	  module will be called chipone_icn8318.
 164
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 165config TOUCHSCREEN_CY8CTMG110
 166	tristate "cy8ctmg110 touchscreen"
 167	depends on I2C
 168	depends on GPIOLIB || COMPILE_TEST
 169	help
 170	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 171	  an AAVA device.
 172
 173	  If unsure, say N.
 174
 175	  To compile this driver as a module, choose M here: the
 176	  module will be called cy8ctmg110_ts.
 177
 178config TOUCHSCREEN_CYTTSP_CORE
 179	tristate "Cypress TTSP touchscreen"
 180	help
 181	  Say Y here if you have a touchscreen using controller from
 182	  the Cypress TrueTouch(tm) Standard Product family connected
 183	  to your system. You will also need to select appropriate
 184	  bus connection below.
 185
 186	  If unsure, say N.
 187
 188	  To compile this driver as a module, choose M here: the
 189	  module will be called cyttsp_core.
 190
 191config TOUCHSCREEN_CYTTSP_I2C
 192	tristate "support I2C bus connection"
 193	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 194	help
 195	  Say Y here if the touchscreen is connected via I2C bus.
 196
 197	  To compile this driver as a module, choose M here: the
 198	  module will be called cyttsp_i2c.
 199
 200config TOUCHSCREEN_CYTTSP_SPI
 201	tristate "support SPI bus connection"
 202	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 203	help
 204	  Say Y here if the touchscreen is connected via SPI bus.
 205
 206	  To compile this driver as a module, choose M here: the
 207	  module will be called cyttsp_spi.
 208
 209config TOUCHSCREEN_CYTTSP4_CORE
 210	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 
 
 
 211	help
 212	  Core driver for Cypress TrueTouch(tm) Standard Product
 213	  Generation4 touchscreen controllers.
 214
 215	  Say Y here if you have a Cypress Gen4 touchscreen.
 216
 217	  If unsure, say N.
 218
 219	  To compile this driver as a module, choose M here.
 220
 221config TOUCHSCREEN_CYTTSP4_I2C
 222	tristate "support I2C bus connection"
 223	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 224	help
 225	  Say Y here if the touchscreen is connected via I2C bus.
 226
 227	  To compile this driver as a module, choose M here: the
 228	  module will be called cyttsp4_i2c.
 229
 230config TOUCHSCREEN_CYTTSP4_SPI
 231	tristate "support SPI bus connection"
 232	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 233	help
 234	  Say Y here if the touchscreen is connected via SPI bus.
 235
 236	  To compile this driver as a module, choose M here: the
 237	  module will be called cyttsp4_spi.
 238
 239config TOUCHSCREEN_DA9034
 240	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 241	depends on PMIC_DA903X
 242	default y
 243	help
 244	  Say Y here to enable the support for the touchscreen found
 245	  on Dialog Semiconductor DA9034 PMIC.
 246
 247	  If unsure, say N.
 248
 249	  To compile this driver as a module, choose M here: the
 250	  module will be called da9034-ts.
 251
 252config TOUCHSCREEN_DA9052
 253	tristate "Dialog DA9052/DA9053 TSI"
 254	depends on PMIC_DA9052
 255	help
 256	  Say Y here to support the touchscreen found on Dialog Semiconductor
 257	  DA9052-BC and DA9053-AA/Bx PMICs.
 258
 259	  If unsure, say N.
 260
 261	  To compile this driver as a module, choose M here: the
 262	  module will be called da9052_tsi.
 263
 264config TOUCHSCREEN_DYNAPRO
 265	tristate "Dynapro serial touchscreen"
 266	select SERIO
 267	help
 268	  Say Y here if you have a Dynapro serial touchscreen connected to
 269	  your system.
 270
 271	  If unsure, say N.
 272
 273	  To compile this driver as a module, choose M here: the
 274	  module will be called dynapro.
 275
 276config TOUCHSCREEN_HAMPSHIRE
 277	tristate "Hampshire serial touchscreen"
 278	select SERIO
 279	help
 280	  Say Y here if you have a Hampshire serial touchscreen connected to
 281	  your system.
 282
 283	  If unsure, say N.
 284
 285	  To compile this driver as a module, choose M here: the
 286	  module will be called hampshire.
 287
 288config TOUCHSCREEN_EETI
 289	tristate "EETI touchscreen panel support"
 290	depends on I2C
 291	help
 292	  Say Y here to enable support for I2C connected EETI touch panels.
 293
 294	  To compile this driver as a module, choose M here: the
 295	  module will be called eeti_ts.
 296
 297config TOUCHSCREEN_EGALAX
 298	tristate "EETI eGalax multi-touch panel support"
 299	depends on I2C && OF
 300	help
 301	  Say Y here to enable support for I2C connected EETI
 302	  eGalax multi-touch panels.
 303
 304	  To compile this driver as a module, choose M here: the
 305	  module will be called egalax_ts.
 306
 307config TOUCHSCREEN_EGALAX_SERIAL
 308	tristate "EETI eGalax serial touchscreen"
 309	select SERIO
 310	help
 311	  Say Y here to enable support for serial connected EETI
 312	  eGalax touch panels.
 313
 314	  To compile this driver as a module, choose M here: the
 315	  module will be called egalax_ts_serial.
 316
 
 
 
 
 
 
 
 
 
 
 317config TOUCHSCREEN_FUJITSU
 318	tristate "Fujitsu serial touchscreen"
 319	select SERIO
 320	help
 321	  Say Y here if you have the Fujitsu touchscreen (such as one
 322	  installed in Lifebook P series laptop) connected to your
 323	  system.
 324
 325	  If unsure, say N.
 326
 327	  To compile this driver as a module, choose M here: the
 328	  module will be called fujitsu-ts.
 329
 330config TOUCHSCREEN_GOODIX
 331	tristate "Goodix I2C touchscreen"
 332	depends on I2C
 333	depends on GPIOLIB || COMPILE_TEST
 334	help
 335	  Say Y here if you have the Goodix touchscreen (such as one
 336	  installed in Onda v975w tablets) connected to your
 337	  system. It also supports 5-finger chip models, which can be
 338	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 339
 340	  If unsure, say N.
 341
 342	  To compile this driver as a module, choose M here: the
 343	  module will be called goodix.
 344
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 345config TOUCHSCREEN_ILI210X
 346	tristate "Ilitek ILI210X based touchscreen"
 347	depends on I2C
 
 348	help
 349	  Say Y here if you have a ILI210X based touchscreen
 350	  controller. This driver supports models ILI2102,
 351	  ILI2102s, ILI2103, ILI2103s and ILI2105.
 352	  Such kind of chipsets can be found in Amazon Kindle Fire
 353	  touchscreens.
 354
 355	  If unsure, say N.
 356
 357	  To compile this driver as a module, choose M here: the
 358	  module will be called ili210x.
 359
 
 
 
 
 
 
 
 
 
 
 
 
 360config TOUCHSCREEN_IPROC
 361	tristate "IPROC touch panel driver support"
 362	depends on ARCH_BCM_IPROC || COMPILE_TEST
 363	help
 364	  Say Y here if you want to add support for the IPROC touch
 365	  controller to your system.
 366
 367	  If unsure, say N.
 368
 369	  To compile this driver as a module, choose M here: the
 370	  module will be called bcm_iproc_tsc.
 371
 372config TOUCHSCREEN_S3C2410
 373	tristate "Samsung S3C2410/generic touchscreen input driver"
 374	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 375	depends on S3C_ADC
 376	help
 377	  Say Y here if you have the s3c2410 touchscreen.
 378
 379	  If unsure, say N.
 380
 381	  To compile this driver as a module, choose M here: the
 382	  module will be called s3c2410_ts.
 383
 384config TOUCHSCREEN_GUNZE
 385	tristate "Gunze AHL-51S touchscreen"
 386	select SERIO
 387	help
 388	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
 389	  your system.
 390
 391	  If unsure, say N.
 392
 393	  To compile this driver as a module, choose M here: the
 394	  module will be called gunze.
 395
 396config TOUCHSCREEN_EKTF2127
 397	tristate "Elan eKTF2127 I2C touchscreen"
 398	depends on I2C
 399	help
 400	  Say Y here if you have an Elan eKTF2127 touchscreen
 401	  connected to your system.
 402
 403	  If unsure, say N.
 404
 405	  To compile this driver as a module, choose M here: the
 406	  module will be called ektf2127.
 407
 408config TOUCHSCREEN_ELAN
 409	tristate "Elan eKTH I2C touchscreen"
 410	depends on I2C
 411	help
 412	  Say Y here if you have an Elan eKTH I2C touchscreen
 413	  connected to your system.
 414
 415	  If unsure, say N.
 416
 417	  To compile this driver as a module, choose M here: the
 418	  module will be called elants_i2c.
 419
 420config TOUCHSCREEN_ELO
 421	tristate "Elo serial touchscreens"
 422	select SERIO
 423	help
 424	  Say Y here if you have an Elo serial touchscreen connected to
 425	  your system.
 426
 427	  If unsure, say N.
 428
 429	  To compile this driver as a module, choose M here: the
 430	  module will be called elo.
 431
 432config TOUCHSCREEN_WACOM_W8001
 433	tristate "Wacom W8001 penabled serial touchscreen"
 434	select SERIO
 435	help
 436	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
 437	  connected to your system.
 438
 439	  If unsure, say N.
 440
 441	  To compile this driver as a module, choose M here: the
 442	  module will be called wacom_w8001.
 443
 444config TOUCHSCREEN_WACOM_I2C
 445	tristate "Wacom Tablet support (I2C)"
 446	depends on I2C
 447	help
 448	  Say Y here if you want to use the I2C version of the Wacom
 449	  Pen Tablet.
 450
 451	  If unsure, say N.
 452
 453	  To compile this driver as a module, choose M here: the module
 454	  will be called wacom_i2c.
 455
 456config TOUCHSCREEN_LPC32XX
 457	tristate "LPC32XX touchscreen controller"
 458	depends on ARCH_LPC32XX
 459	help
 460	  Say Y here if you have a LPC32XX device and want
 461	  to support the built-in touchscreen.
 462
 463	  To compile this driver as a module, choose M here: the
 464	  module will be called lpc32xx_ts.
 465
 466config TOUCHSCREEN_MAX11801
 467	tristate "MAX11801 based touchscreens"
 468	depends on I2C
 469	help
 470	  Say Y here if you have a MAX11801 based touchscreen
 471	  controller.
 472
 473	  If unsure, say N.
 474
 475	  To compile this driver as a module, choose M here: the
 476	  module will be called max11801_ts.
 477
 478config TOUCHSCREEN_MCS5000
 479	tristate "MELFAS MCS-5000 touchscreen"
 480	depends on I2C
 481	help
 482	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 483	  chip in your system.
 484
 485	  If unsure, say N.
 486
 487	  To compile this driver as a module, choose M here: the
 488	  module will be called mcs5000_ts.
 489
 490config TOUCHSCREEN_MMS114
 491	tristate "MELFAS MMS114 touchscreen"
 492	depends on I2C
 493	help
 494	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 495	  chip in your system.
 496
 497	  If unsure, say N.
 498
 499	  To compile this driver as a module, choose M here: the
 500	  module will be called mms114.
 501
 502config TOUCHSCREEN_MELFAS_MIP4
 503	tristate "MELFAS MIP4 Touchscreen"
 504	depends on I2C
 505	help
 506	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
 507
 508	  If unsure, say N.
 509
 510	  To compile this driver as a module, choose M here:
 511	  the module will be called melfas_mip4.
 512
 
 
 
 
 
 
 
 
 
 
 
 
 513config TOUCHSCREEN_MTOUCH
 514	tristate "MicroTouch serial touchscreens"
 515	select SERIO
 516	help
 517	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 518	  your system.
 519
 520	  If unsure, say N.
 521
 522	  To compile this driver as a module, choose M here: the
 523	  module will be called mtouch.
 524
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 525config TOUCHSCREEN_IMX6UL_TSC
 526	tristate "Freescale i.MX6UL touchscreen controller"
 527	depends on (OF && GPIOLIB) || COMPILE_TEST
 528	help
 529	  Say Y here if you have a Freescale i.MX6UL, and want to
 530	  use the internal touchscreen controller.
 531
 532	  If unsure, say N.
 533
 534	  To compile this driver as a module, choose M here: the
 535	  module will be called imx6ul_tsc.
 536
 537config TOUCHSCREEN_INEXIO
 538	tristate "iNexio serial touchscreens"
 539	select SERIO
 540	help
 541	  Say Y here if you have an iNexio serial touchscreen connected to
 542	  your system.
 543
 544	  If unsure, say N.
 545
 546	  To compile this driver as a module, choose M here: the
 547	  module will be called inexio.
 548
 549config TOUCHSCREEN_INTEL_MID
 550	tristate "Intel MID platform resistive touchscreen"
 551	depends on INTEL_SCU_IPC
 552	help
 553	  Say Y here if you have a Intel MID based touchscreen in
 554	  your system.
 555
 556	  If unsure, say N.
 557
 558	  To compile this driver as a module, choose M here: the
 559	  module will be called intel_mid_touch.
 560
 561config TOUCHSCREEN_MK712
 562	tristate "ICS MicroClock MK712 touchscreen"
 
 563	help
 564	  Say Y here if you have the ICS MicroClock MK712 touchscreen
 565	  controller chip in your system.
 566
 567	  If unsure, say N.
 568
 569	  To compile this driver as a module, choose M here: the
 570	  module will be called mk712.
 571
 572config TOUCHSCREEN_HP600
 573	tristate "HP Jornada 6xx touchscreen"
 574	depends on SH_HP6XX && SH_ADC
 575	help
 576	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
 577          support the built-in touchscreen.
 578
 579	  To compile this driver as a module, choose M here: the
 580	  module will be called hp680_ts_input.
 581
 582config TOUCHSCREEN_HP7XX
 583	tristate "HP Jornada 7xx touchscreen"
 584	depends on SA1100_JORNADA720_SSP
 585	help
 586	  Say Y here if you have a HP Jornada 710/720/728 and want
 587	  to support the built-in touchscreen.
 588
 589	  To compile this driver as a module, choose M here: the
 590	  module will be called jornada720_ts.
 591
 592config TOUCHSCREEN_IPAQ_MICRO
 593	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 594	depends on MFD_IPAQ_MICRO
 595	help
 596	  Say Y here to enable support for the touchscreen attached to
 597	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 598
 599	  If unsure, say N.
 600
 601	  To compile this driver as a module, choose M here: the
 602	  module will be called ipaq-micro-ts.
 603
 604config TOUCHSCREEN_HTCPEN
 605	tristate "HTC Shift X9500 touchscreen"
 606	depends on ISA
 607	help
 608	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 609	  Clio / Shangrila and want to support the built-in touchscreen.
 610
 611	  If unsure, say N.
 612
 613	  To compile this driver as a module, choose M here: the
 614	  module will be called htcpen.
 615
 616config TOUCHSCREEN_PENMOUNT
 617	tristate "Penmount serial touchscreen"
 618	select SERIO
 619	help
 620	  Say Y here if you have a Penmount serial touchscreen connected to
 621	  your system.
 622
 623	  If unsure, say N.
 624
 625	  To compile this driver as a module, choose M here: the
 626	  module will be called penmount.
 627
 628config TOUCHSCREEN_EDT_FT5X06
 629	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 630	depends on I2C
 
 631	help
 632	  Say Y here if you have an EDT "Polytouch" touchscreen based
 633	  on the FocalTech FT5x06 family of controllers connected to
 634	  your system.
 635
 636	  If unsure, say N.
 637
 638	  To compile this driver as a module, choose M here: the
 639	  module will be called edt-ft5x06.
 640
 
 
 
 
 
 
 
 
 
 
 
 
 641config TOUCHSCREEN_MIGOR
 642	tristate "Renesas MIGO-R touchscreen"
 643	depends on (SH_MIGOR || COMPILE_TEST) && I2C
 644	help
 645	  Say Y here to enable MIGO-R touchscreen support.
 646
 647	  If unsure, say N.
 648
 649	  To compile this driver as a module, choose M here: the
 650	  module will be called migor_ts.
 651
 652config TOUCHSCREEN_TOUCHRIGHT
 653	tristate "Touchright serial touchscreen"
 654	select SERIO
 655	help
 656	  Say Y here if you have a Touchright serial touchscreen connected to
 657	  your system.
 658
 659	  If unsure, say N.
 660
 661	  To compile this driver as a module, choose M here: the
 662	  module will be called touchright.
 663
 664config TOUCHSCREEN_TOUCHWIN
 665	tristate "Touchwin serial touchscreen"
 666	select SERIO
 667	help
 668	  Say Y here if you have a Touchwin serial touchscreen connected to
 669	  your system.
 670
 671	  If unsure, say N.
 672
 673	  To compile this driver as a module, choose M here: the
 674	  module will be called touchwin.
 675
 676config TOUCHSCREEN_TI_AM335X_TSC
 677	tristate "TI Touchscreen Interface"
 678	depends on MFD_TI_AM335X_TSCADC
 679	help
 680	  Say Y here if you have 4/5/8 wire touchscreen controller
 681	  to be connected to the ADC controller on your TI AM335x SoC.
 682
 683	  If unsure, say N.
 684
 685	  To compile this driver as a module, choose M here: the
 686	  module will be called ti_am335x_tsc.
 687
 688config TOUCHSCREEN_UCB1400
 689	tristate "Philips UCB1400 touchscreen"
 690	depends on AC97_BUS
 691	depends on UCB1400_CORE
 692	help
 693	  This enables support for the Philips UCB1400 touchscreen interface.
 694	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
 695	  will be initialized only after the ALSA subsystem has been
 696	  brought up and the UCB1400 detected.  You therefore have to
 697	  configure ALSA support as well (either built-in or modular,
 698	  independently of whether this driver is itself built-in or
 699	  modular) for this driver to work.
 700
 701	  To compile this driver as a module, choose M here: the
 702	  module will be called ucb1400_ts.
 703
 704config TOUCHSCREEN_PIXCIR
 705	tristate "PIXCIR I2C touchscreens"
 706	depends on I2C
 707	help
 708	  Say Y here if you have a pixcir i2c touchscreen
 709	  controller.
 710
 711	  If unsure, say N.
 712
 713	  To compile this driver as a module, choose M here: the
 714	  module will be called pixcir_i2c_ts.
 715
 716config TOUCHSCREEN_WDT87XX_I2C
 717	tristate "Weida HiTech I2C touchscreen"
 718	depends on I2C
 719	help
 720	  Say Y here if you have a Weida WDT87XX I2C touchscreen
 721	  connected to your system.
 722
 723	  If unsure, say N.
 724
 725	  To compile this driver as a module, choose M here: the
 726	  module will be called wdt87xx_i2c.
 727
 728config TOUCHSCREEN_WM831X
 729	tristate "Support for WM831x touchscreen controllers"
 730	depends on MFD_WM831X
 731	help
 732	  This enables support for the touchscreen controller on the WM831x
 733	  series of PMICs.
 734
 735	  To compile this driver as a module, choose M here: the
 736	  module will be called wm831x-ts.
 737
 738config TOUCHSCREEN_WM97XX
 739	tristate "Support for WM97xx AC97 touchscreen controllers"
 740	depends on AC97_BUS
 741	help
 742	  Say Y here if you have a Wolfson Microelectronics WM97xx
 743	  touchscreen connected to your system. Note that this option
 744	  only enables core driver, you will also need to select
 745	  support for appropriate chip below.
 746
 747	  If unsure, say N.
 748
 749	  To compile this driver as a module, choose M here: the
 750	  module will be called wm97xx-ts.
 751
 752config TOUCHSCREEN_WM9705
 753	bool "WM9705 Touchscreen interface support"
 754	depends on TOUCHSCREEN_WM97XX
 755	default y
 756	help
 757	  Say Y here to enable support for the Wolfson Microelectronics
 758	  WM9705 touchscreen controller.
 759
 760config TOUCHSCREEN_WM9712
 761	bool "WM9712 Touchscreen interface support"
 762	depends on TOUCHSCREEN_WM97XX
 763	default y
 764	help
 765	  Say Y here to enable support for the Wolfson Microelectronics
 766	  WM9712 touchscreen controller.
 767
 768config TOUCHSCREEN_WM9713
 769	bool "WM9713 Touchscreen interface support"
 770	depends on TOUCHSCREEN_WM97XX
 771	default y
 772	help
 773	  Say Y here to enable support for the Wolfson Microelectronics
 774	  WM9713 touchscreen controller.
 775
 776config TOUCHSCREEN_WM97XX_ATMEL
 777	tristate "WM97xx Atmel accelerated touch"
 778	depends on TOUCHSCREEN_WM97XX && AVR32
 779	help
 780	  Say Y here for support for streaming mode with WM97xx touchscreens
 781	  on Atmel AT91 or AVR32 systems with an AC97C module.
 782
 783	  Be aware that this will use channel B in the controller for
 784	  streaming data, this must not conflict with other AC97C drivers.
 785
 786	  If unsure, say N.
 787
 788	  To compile this driver as a module, choose M here: the module will
 789	  be called atmel-wm97xx.
 790
 791config TOUCHSCREEN_WM97XX_MAINSTONE
 792	tristate "WM97xx Mainstone/Palm accelerated touch"
 793	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 
 794	help
 795	  Say Y here for support for streaming mode with WM97xx touchscreens
 796	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 797
 798	  If unsure, say N.
 799
 800	  To compile this driver as a module, choose M here: the
 801	  module will be called mainstone-wm97xx.
 802
 803config TOUCHSCREEN_WM97XX_ZYLONITE
 804	tristate "Zylonite accelerated touch"
 805	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 806	select TOUCHSCREEN_WM9713
 807	help
 808	  Say Y here for support for streaming mode with the touchscreen
 809	  on Zylonite systems.
 810
 811	  If unsure, say N.
 812
 813	  To compile this driver as a module, choose M here: the
 814	  module will be called zylonite-wm97xx.
 815
 816config TOUCHSCREEN_USB_COMPOSITE
 817	tristate "USB Touchscreen Driver"
 818	depends on USB_ARCH_HAS_HCD
 819	select USB
 820	help
 821	  USB Touchscreen driver for:
 822	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 823	  - PanJit TouchSet USB
 824	  - 3M MicroTouch USB (EX II series)
 825	  - ITM
 826	  - some other eTurboTouch
 827	  - Gunze AHL61
 828	  - DMC TSC-10/25
 829	  - IRTOUCHSYSTEMS/UNITOP
 830	  - IdealTEK URTC1000
 831	  - GoTop Super_Q2/GogoPen/PenPower tablets
 832	  - JASTEC USB Touch Controller/DigiTech DTR-02U
 833	  - Zytronic controllers
 834	  - Elo TouchSystems 2700 IntelliTouch
 835	  - EasyTouch USB Touch Controller from Data Modul
 836	  - e2i (Mimo monitors)
 837
 838	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 839	  a usage description and the required user-space stuff.
 840
 841	  To compile this driver as a module, choose M here: the
 842	  module will be called usbtouchscreen.
 843
 
 
 
 
 
 
 
 
 
 
 844config TOUCHSCREEN_MX25
 845	tristate "Freescale i.MX25 touchscreen input driver"
 846	depends on MFD_MX25_TSADC
 847	help
 848	  Enable support for touchscreen connected to your i.MX25.
 849
 850	  To compile this driver as a module, choose M here: the
 851	  module will be called fsl-imx25-tcq.
 852
 853config TOUCHSCREEN_MC13783
 854	tristate "Freescale MC13783 touchscreen input driver"
 855	depends on MFD_MC13XXX
 856	help
 857	  Say Y here if you have an Freescale MC13783 PMIC on your
 858	  board and want to use its touchscreen
 859
 860	  If unsure, say N.
 861
 862	  To compile this driver as a module, choose M here: the
 863	  module will be called mc13783_ts.
 864
 865config TOUCHSCREEN_USB_EGALAX
 866	default y
 867	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 868	depends on TOUCHSCREEN_USB_COMPOSITE
 869
 870config TOUCHSCREEN_USB_PANJIT
 871	default y
 872	bool "PanJit device support" if EXPERT
 873	depends on TOUCHSCREEN_USB_COMPOSITE
 874
 875config TOUCHSCREEN_USB_3M
 876	default y
 877	bool "3M/Microtouch EX II series device support" if EXPERT
 878	depends on TOUCHSCREEN_USB_COMPOSITE
 879
 880config TOUCHSCREEN_USB_ITM
 881	default y
 882	bool "ITM device support" if EXPERT
 883	depends on TOUCHSCREEN_USB_COMPOSITE
 884
 885config TOUCHSCREEN_USB_ETURBO
 886	default y
 887	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 888	depends on TOUCHSCREEN_USB_COMPOSITE
 889
 890config TOUCHSCREEN_USB_GUNZE
 891	default y
 892	bool "Gunze AHL61 device support" if EXPERT
 893	depends on TOUCHSCREEN_USB_COMPOSITE
 894
 895config TOUCHSCREEN_USB_DMC_TSC10
 896	default y
 897	bool "DMC TSC-10/25 device support" if EXPERT
 898	depends on TOUCHSCREEN_USB_COMPOSITE
 899
 900config TOUCHSCREEN_USB_IRTOUCH
 901	default y
 902	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 903	depends on TOUCHSCREEN_USB_COMPOSITE
 904
 905config TOUCHSCREEN_USB_IDEALTEK
 906	default y
 907	bool "IdealTEK URTC1000 device support" if EXPERT
 908	depends on TOUCHSCREEN_USB_COMPOSITE
 909
 910config TOUCHSCREEN_USB_GENERAL_TOUCH
 911	default y
 912	bool "GeneralTouch Touchscreen device support" if EXPERT
 913	depends on TOUCHSCREEN_USB_COMPOSITE
 914
 915config TOUCHSCREEN_USB_GOTOP
 916	default y
 917	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 918	depends on TOUCHSCREEN_USB_COMPOSITE
 919
 920config TOUCHSCREEN_USB_JASTEC
 921	default y
 922	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 923	depends on TOUCHSCREEN_USB_COMPOSITE
 924
 925config TOUCHSCREEN_USB_ELO
 926	default y
 927	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 928	depends on TOUCHSCREEN_USB_COMPOSITE
 929
 930config TOUCHSCREEN_USB_E2I
 931	default y
 932	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 933	depends on TOUCHSCREEN_USB_COMPOSITE
 934
 935config TOUCHSCREEN_USB_ZYTRONIC
 936	default y
 937	bool "Zytronic controller" if EXPERT
 938	depends on TOUCHSCREEN_USB_COMPOSITE
 939
 940config TOUCHSCREEN_USB_ETT_TC45USB
 941	default y
 942	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 943	depends on TOUCHSCREEN_USB_COMPOSITE
 944
 945config TOUCHSCREEN_USB_NEXIO
 946	default y
 947	bool "NEXIO/iNexio device support" if EXPERT
 948	depends on TOUCHSCREEN_USB_COMPOSITE
 949
 950config TOUCHSCREEN_USB_EASYTOUCH
 951	default y
 952	bool "EasyTouch USB Touch controller device support" if EMBEDDED
 953	depends on TOUCHSCREEN_USB_COMPOSITE
 954	help
 955	  Say Y here if you have an EasyTouch USB Touch controller.
 956	  If unsure, say N.
 957
 958config TOUCHSCREEN_TOUCHIT213
 959	tristate "Sahara TouchIT-213 touchscreen"
 960	select SERIO
 961	help
 962	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 963
 964	  If unsure, say N.
 965
 966	  To compile this driver as a module, choose M here: the
 967	  module will be called touchit213.
 968
 969config TOUCHSCREEN_TS4800
 970	tristate "TS-4800 touchscreen"
 971	depends on HAS_IOMEM && OF
 972	depends on SOC_IMX51 || COMPILE_TEST
 973	select MFD_SYSCON
 974	select INPUT_POLLDEV
 975	help
 976	  Say Y here if you have a touchscreen on a TS-4800 board.
 977
 978	  On TS-4800, the touchscreen is not handled directly by Linux but by
 979	  a companion FPGA.
 980
 981	  If unsure, say N.
 982
 983	  To compile this driver as a module, choose M here: the
 984	  module will be called ts4800_ts.
 985
 986config TOUCHSCREEN_TSC_SERIO
 987	tristate "TSC-10/25/40 serial touchscreen support"
 988	select SERIO
 989	help
 990	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 991	  to your system.
 992
 993	  If unsure, say N.
 994
 995	  To compile this driver as a module, choose M here: the
 996	  module will be called tsc40.
 997
 998config TOUCHSCREEN_TSC200X_CORE
 999	tristate
1000
1001config TOUCHSCREEN_TSC2004
1002	tristate "TSC2004 based touchscreens"
1003	depends on I2C
1004	select REGMAP_I2C
1005	select TOUCHSCREEN_TSC200X_CORE
1006	help
1007	  Say Y here if you have a TSC2004 based touchscreen.
1008
1009	  If unsure, say N.
1010
1011	  To compile this driver as a module, choose M here: the
1012	  module will be called tsc2004.
1013
1014config TOUCHSCREEN_TSC2005
1015	tristate "TSC2005 based touchscreens"
1016	depends on SPI_MASTER
1017	select REGMAP_SPI
1018	select TOUCHSCREEN_TSC200X_CORE
1019	help
1020	  Say Y here if you have a TSC2005 based touchscreen.
1021
1022	  If unsure, say N.
1023
1024	  To compile this driver as a module, choose M here: the
1025	  module will be called tsc2005.
1026
1027config TOUCHSCREEN_TSC2007
1028	tristate "TSC2007 based touchscreens"
1029	depends on I2C
1030	help
1031	  Say Y here if you have a TSC2007 based touchscreen.
1032
1033	  If unsure, say N.
1034
1035	  To compile this driver as a module, choose M here: the
1036	  module will be called tsc2007.
1037
1038config TOUCHSCREEN_W90X900
1039	tristate "W90P910 touchscreen driver"
1040	depends on ARCH_W90X900
1041	help
1042	  Say Y here if you have a W90P910 based touchscreen.
1043
1044	  To compile this driver as a module, choose M here: the
1045	  module will be called w90p910_ts.
 
1046
1047config TOUCHSCREEN_PCAP
1048	tristate "Motorola PCAP touchscreen"
1049	depends on EZX_PCAP
1050	help
1051	  Say Y here if you have a Motorola EZX telephone and
1052	  want to enable support for the built-in touchscreen.
1053
1054	  To compile this driver as a module, choose M here: the
1055	  module will be called pcap_ts.
1056
1057config TOUCHSCREEN_RM_TS
1058	tristate "Raydium I2C Touchscreen"
1059	depends on I2C
1060	depends on GPIOLIB || COMPILE_TEST
1061	help
1062	  Say Y here if you have Raydium series I2C touchscreen,
1063	  such as RM32380, connected to your system.
1064
1065	  If unsure, say N.
1066
1067	  To compile this driver as a module, choose M here: the
1068	  module will be called raydium_i2c_ts.
1069
1070config TOUCHSCREEN_SILEAD
1071	tristate "Silead I2C touchscreen"
1072	depends on I2C
1073	help
1074	  Say Y here if you have the Silead touchscreen connected to
1075	  your system.
1076
1077	  If unsure, say N.
1078
1079	  To compile this driver as a module, choose M here: the
1080	  module will be called silead.
1081
1082config TOUCHSCREEN_SIS_I2C
1083	tristate "SiS 9200 family I2C touchscreen"
1084	depends on I2C
1085	select CRC_ITU_T
1086	depends on GPIOLIB || COMPILE_TEST
1087	help
1088	  This enables support for SiS 9200 family over I2C based touchscreens.
1089
1090	  If unsure, say N.
1091
1092	  To compile this driver as a module, choose M here: the
1093	  module will be called sis_i2c.
1094
1095config TOUCHSCREEN_ST1232
1096	tristate "Sitronix ST1232 touchscreen controllers"
1097	depends on I2C
1098	help
1099	  Say Y here if you want to support Sitronix ST1232
1100	  touchscreen controller.
1101
1102	  If unsure, say N.
1103
1104	  To compile this driver as a module, choose M here: the
1105	  module will be called st1232_ts.
1106
 
 
 
 
 
 
 
 
 
 
 
1107config TOUCHSCREEN_STMPE
1108	tristate "STMicroelectronics STMPE touchscreens"
1109	depends on MFD_STMPE
1110	depends on (OF || COMPILE_TEST)
1111	help
1112	  Say Y here if you want support for STMicroelectronics
1113	  STMPE touchscreen controllers.
1114
1115	  To compile this driver as a module, choose M here: the
1116	  module will be called stmpe-ts.
1117
1118config TOUCHSCREEN_SUN4I
1119	tristate "Allwinner sun4i resistive touchscreen controller support"
1120	depends on ARCH_SUNXI || COMPILE_TEST
1121	depends on HWMON
1122	depends on THERMAL || !THERMAL_OF
1123	help
1124	  This selects support for the resistive touchscreen controller
1125	  found on Allwinner sunxi SoCs.
1126
1127	  To compile this driver as a module, choose M here: the
1128	  module will be called sun4i-ts.
1129
1130config TOUCHSCREEN_SUR40
1131	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1132	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1133	depends on VIDEO_V4L2
1134	select INPUT_POLLDEV
1135	select VIDEOBUF2_DMA_SG
1136	help
1137	  Say Y here if you want support for the Samsung SUR40 touchscreen
1138	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1139
1140	  To compile this driver as a module, choose M here: the
1141	  module will be called sur40.
1142
1143config TOUCHSCREEN_SURFACE3_SPI
1144	tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1145	depends on SPI
1146	depends on GPIOLIB || COMPILE_TEST
1147	help
1148	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1149	  controller chip as found on the Surface 3 in your system.
1150
1151	  If unsure, say N.
1152
1153	  To compile this driver as a module, choose M here: the
1154	  module will be called surface3_spi.
1155
1156config TOUCHSCREEN_SX8654
1157	tristate "Semtech SX8654 touchscreen"
1158	depends on I2C
1159	help
1160	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1161
1162	  If unsure, say N
1163
1164	  To compile this driver as a module, choose M here: the
1165	  module will be called sx8654.
1166
1167config TOUCHSCREEN_TPS6507X
1168	tristate "TPS6507x based touchscreens"
1169	depends on I2C
1170	select INPUT_POLLDEV
1171	help
1172	  Say Y here if you have a TPS6507x based touchscreen
1173	  controller.
1174
1175	  If unsure, say N.
1176
1177	  To compile this driver as a module, choose M here: the
1178	  module will be called tps6507x_ts.
1179
 
 
 
 
 
 
 
 
 
 
 
1180config TOUCHSCREEN_ZFORCE
1181	tristate "Neonode zForce infrared touchscreens"
1182	depends on I2C
1183	depends on GPIOLIB || COMPILE_TEST
1184	help
1185	  Say Y here if you have a touchscreen using the zforce
1186	  infraread technology from Neonode.
1187
1188	  If unsure, say N.
1189
1190	  To compile this driver as a module, choose M here: the
1191	  module will be called zforce_ts.
1192
1193config TOUCHSCREEN_COLIBRI_VF50
1194	tristate "Toradex Colibri on board touchscreen driver"
1195	depends on IIO && VF610_ADC
1196	depends on GPIOLIB || COMPILE_TEST
1197	help
1198	  Say Y here if you have a Colibri VF50 and plan to use
1199	  the on-board provided 4-wire touchscreen driver.
1200
1201	  If unsure, say N.
1202
1203	  To compile this driver as a module, choose M here: the
1204	  module will be called colibri_vf50_ts.
1205
1206config TOUCHSCREEN_ROHM_BU21023
1207	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1208	depends on I2C
1209	help
1210	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1211
1212	  If unsure, say N.
1213
1214	  To compile this driver as a module, choose M here: the
1215	  module will be called bu21023_ts.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1216
1217endif