Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) Overkiz SAS 2012
4 *
5 * Author: Boris BREZILLON <b.brezillon@overkiz.com>
6 */
7
8#include <linux/module.h>
9#include <linux/init.h>
10#include <linux/clocksource.h>
11#include <linux/clockchips.h>
12#include <linux/interrupt.h>
13#include <linux/irq.h>
14
15#include <linux/clk.h>
16#include <linux/err.h>
17#include <linux/ioport.h>
18#include <linux/io.h>
19#include <linux/mfd/syscon.h>
20#include <linux/platform_device.h>
21#include <linux/pwm.h>
22#include <linux/of.h>
23#include <linux/regmap.h>
24#include <linux/slab.h>
25#include <soc/at91/atmel_tcb.h>
26
27#define NPWM 2
28
29#define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \
30 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
31
32#define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \
33 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
34
35struct atmel_tcb_pwm_device {
36 unsigned div; /* PWM clock divider */
37 unsigned duty; /* PWM duty expressed in clk cycles */
38 unsigned period; /* PWM period expressed in clk cycles */
39};
40
41struct atmel_tcb_channel {
42 u32 enabled;
43 u32 cmr;
44 u32 ra;
45 u32 rb;
46 u32 rc;
47};
48
49struct atmel_tcb_pwm_chip {
50 spinlock_t lock;
51 u8 channel;
52 u8 width;
53 struct regmap *regmap;
54 struct clk *clk;
55 struct clk *gclk;
56 struct clk *slow_clk;
57 struct atmel_tcb_pwm_device pwms[NPWM];
58 struct atmel_tcb_channel bkup;
59};
60
61static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, };
62
63static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
64{
65 return pwmchip_get_drvdata(chip);
66}
67
68static int atmel_tcb_pwm_request(struct pwm_chip *chip,
69 struct pwm_device *pwm)
70{
71 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
72 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
73 unsigned cmr;
74 int ret;
75
76 ret = clk_prepare_enable(tcbpwmc->clk);
77 if (ret)
78 return ret;
79
80 tcbpwm->duty = 0;
81 tcbpwm->period = 0;
82 tcbpwm->div = 0;
83
84 guard(spinlock)(&tcbpwmc->lock);
85
86 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
87 /*
88 * Get init config from Timer Counter registers if
89 * Timer Counter is already configured as a PWM generator.
90 */
91 if (cmr & ATMEL_TC_WAVE) {
92 if (pwm->hwpwm == 0)
93 regmap_read(tcbpwmc->regmap,
94 ATMEL_TC_REG(tcbpwmc->channel, RA),
95 &tcbpwm->duty);
96 else
97 regmap_read(tcbpwmc->regmap,
98 ATMEL_TC_REG(tcbpwmc->channel, RB),
99 &tcbpwm->duty);
100
101 tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
102 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
103 &tcbpwm->period);
104 cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
105 ATMEL_TC_BCMR_MASK);
106 } else
107 cmr = 0;
108
109 cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
110 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
111
112 return 0;
113}
114
115static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
116{
117 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
118
119 clk_disable_unprepare(tcbpwmc->clk);
120}
121
122static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
123 enum pwm_polarity polarity)
124{
125 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
126 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
127 unsigned cmr;
128
129 /*
130 * If duty is 0 the timer will be stopped and we have to
131 * configure the output correctly on software trigger:
132 * - set output to high if PWM_POLARITY_INVERSED
133 * - set output to low if PWM_POLARITY_NORMAL
134 *
135 * This is why we're reverting polarity in this case.
136 */
137 if (tcbpwm->duty == 0)
138 polarity = !polarity;
139
140 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
141
142 /* flush old setting and set the new one */
143 if (pwm->hwpwm == 0) {
144 cmr &= ~ATMEL_TC_ACMR_MASK;
145 if (polarity == PWM_POLARITY_INVERSED)
146 cmr |= ATMEL_TC_ASWTRG_CLEAR;
147 else
148 cmr |= ATMEL_TC_ASWTRG_SET;
149 } else {
150 cmr &= ~ATMEL_TC_BCMR_MASK;
151 if (polarity == PWM_POLARITY_INVERSED)
152 cmr |= ATMEL_TC_BSWTRG_CLEAR;
153 else
154 cmr |= ATMEL_TC_BSWTRG_SET;
155 }
156
157 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
158
159 /*
160 * Use software trigger to apply the new setting.
161 * If both PWM devices in this group are disabled we stop the clock.
162 */
163 if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
164 regmap_write(tcbpwmc->regmap,
165 ATMEL_TC_REG(tcbpwmc->channel, CCR),
166 ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS);
167 tcbpwmc->bkup.enabled = 1;
168 } else {
169 regmap_write(tcbpwmc->regmap,
170 ATMEL_TC_REG(tcbpwmc->channel, CCR),
171 ATMEL_TC_SWTRG);
172 tcbpwmc->bkup.enabled = 0;
173 }
174}
175
176static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
177 enum pwm_polarity polarity)
178{
179 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
180 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
181 u32 cmr;
182
183 /*
184 * If duty is 0 the timer will be stopped and we have to
185 * configure the output correctly on software trigger:
186 * - set output to high if PWM_POLARITY_INVERSED
187 * - set output to low if PWM_POLARITY_NORMAL
188 *
189 * This is why we're reverting polarity in this case.
190 */
191 if (tcbpwm->duty == 0)
192 polarity = !polarity;
193
194 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
195
196 /* flush old setting and set the new one */
197 cmr &= ~ATMEL_TC_TCCLKS;
198
199 if (pwm->hwpwm == 0) {
200 cmr &= ~ATMEL_TC_ACMR_MASK;
201
202 /* Set CMR flags according to given polarity */
203 if (polarity == PWM_POLARITY_INVERSED)
204 cmr |= ATMEL_TC_ASWTRG_CLEAR;
205 else
206 cmr |= ATMEL_TC_ASWTRG_SET;
207 } else {
208 cmr &= ~ATMEL_TC_BCMR_MASK;
209 if (polarity == PWM_POLARITY_INVERSED)
210 cmr |= ATMEL_TC_BSWTRG_CLEAR;
211 else
212 cmr |= ATMEL_TC_BSWTRG_SET;
213 }
214
215 /*
216 * If duty is 0 or equal to period there's no need to register
217 * a specific action on RA/RB and RC compare.
218 * The output will be configured on software trigger and keep
219 * this config till next config call.
220 */
221 if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
222 if (pwm->hwpwm == 0) {
223 if (polarity == PWM_POLARITY_INVERSED)
224 cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
225 else
226 cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
227 } else {
228 if (polarity == PWM_POLARITY_INVERSED)
229 cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
230 else
231 cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
232 }
233 }
234
235 cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
236
237 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
238
239 if (pwm->hwpwm == 0)
240 regmap_write(tcbpwmc->regmap,
241 ATMEL_TC_REG(tcbpwmc->channel, RA),
242 tcbpwm->duty);
243 else
244 regmap_write(tcbpwmc->regmap,
245 ATMEL_TC_REG(tcbpwmc->channel, RB),
246 tcbpwm->duty);
247
248 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
249 tcbpwm->period);
250
251 /* Use software trigger to apply the new setting */
252 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR),
253 ATMEL_TC_SWTRG | ATMEL_TC_CLKEN);
254 tcbpwmc->bkup.enabled = 1;
255 return 0;
256}
257
258static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
259 int duty_ns, int period_ns)
260{
261 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
262 struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
263 /* companion PWM sharing register values period and div */
264 struct atmel_tcb_pwm_device *atcbpwm = &tcbpwmc->pwms[pwm->hwpwm ^ 1];
265 int i = 0;
266 int slowclk = 0;
267 unsigned period;
268 unsigned duty;
269 unsigned rate = clk_get_rate(tcbpwmc->clk);
270 unsigned long long min;
271 unsigned long long max;
272
273 /*
274 * Find best clk divisor:
275 * the smallest divisor which can fulfill the period_ns requirements.
276 * If there is a gclk, the first divisor is actually the gclk selector
277 */
278 if (tcbpwmc->gclk)
279 i = 1;
280 for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) {
281 if (atmel_tcb_divisors[i] == 0) {
282 slowclk = i;
283 continue;
284 }
285 min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate);
286 max = min << tcbpwmc->width;
287 if (max >= period_ns)
288 break;
289 }
290
291 /*
292 * If none of the divisor are small enough to represent period_ns
293 * take slow clock (32KHz).
294 */
295 if (i == ARRAY_SIZE(atmel_tcb_divisors)) {
296 i = slowclk;
297 rate = clk_get_rate(tcbpwmc->slow_clk);
298 min = div_u64(NSEC_PER_SEC, rate);
299 max = min << tcbpwmc->width;
300
301 /* If period is too big return ERANGE error */
302 if (max < period_ns)
303 return -ERANGE;
304 }
305
306 duty = div_u64(duty_ns, min);
307 period = div_u64(period_ns, min);
308
309 /*
310 * PWM devices provided by the TCB driver are grouped by 2.
311 * PWM devices in a given group must be configured with the
312 * same period_ns.
313 *
314 * We're checking the period value of the second PWM device
315 * in this group before applying the new config.
316 */
317 if ((atcbpwm->duty > 0 && atcbpwm->duty != atcbpwm->period) &&
318 (atcbpwm->div != i || atcbpwm->period != period)) {
319 dev_err(pwmchip_parent(chip),
320 "failed to configure period_ns: PWM group already configured with a different value\n");
321 return -EINVAL;
322 }
323
324 tcbpwm->period = period;
325 tcbpwm->div = i;
326 tcbpwm->duty = duty;
327
328 return 0;
329}
330
331static int atmel_tcb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
332 const struct pwm_state *state)
333{
334 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
335 int duty_cycle, period;
336 int ret;
337
338 guard(spinlock)(&tcbpwmc->lock);
339
340 if (!state->enabled) {
341 atmel_tcb_pwm_disable(chip, pwm, state->polarity);
342 return 0;
343 }
344
345 period = min(state->period, INT_MAX);
346 duty_cycle = min(state->duty_cycle, INT_MAX);
347
348 ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period);
349 if (ret)
350 return ret;
351
352 return atmel_tcb_pwm_enable(chip, pwm, state->polarity);
353}
354
355static const struct pwm_ops atmel_tcb_pwm_ops = {
356 .request = atmel_tcb_pwm_request,
357 .free = atmel_tcb_pwm_free,
358 .apply = atmel_tcb_pwm_apply,
359};
360
361static struct atmel_tcb_config tcb_rm9200_config = {
362 .counter_width = 16,
363};
364
365static struct atmel_tcb_config tcb_sam9x5_config = {
366 .counter_width = 32,
367};
368
369static struct atmel_tcb_config tcb_sama5d2_config = {
370 .counter_width = 32,
371 .has_gclk = 1,
372};
373
374static const struct of_device_id atmel_tcb_of_match[] = {
375 { .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
376 { .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
377 { .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
378 { /* sentinel */ }
379};
380
381static int atmel_tcb_pwm_probe(struct platform_device *pdev)
382{
383 struct pwm_chip *chip;
384 const struct of_device_id *match;
385 struct atmel_tcb_pwm_chip *tcbpwmc;
386 const struct atmel_tcb_config *config;
387 struct device_node *np = pdev->dev.of_node;
388 char clk_name[] = "t0_clk";
389 int err;
390 int channel;
391
392 chip = devm_pwmchip_alloc(&pdev->dev, NPWM, sizeof(*tcbpwmc));
393 if (IS_ERR(chip))
394 return PTR_ERR(chip);
395 tcbpwmc = to_tcb_chip(chip);
396
397 err = of_property_read_u32(np, "reg", &channel);
398 if (err < 0) {
399 dev_err(&pdev->dev,
400 "failed to get Timer Counter Block channel from device tree (error: %d)\n",
401 err);
402 return err;
403 }
404
405 tcbpwmc->regmap = syscon_node_to_regmap(np->parent);
406 if (IS_ERR(tcbpwmc->regmap))
407 return PTR_ERR(tcbpwmc->regmap);
408
409 tcbpwmc->slow_clk = of_clk_get_by_name(np->parent, "slow_clk");
410 if (IS_ERR(tcbpwmc->slow_clk))
411 return PTR_ERR(tcbpwmc->slow_clk);
412
413 clk_name[1] += channel;
414 tcbpwmc->clk = of_clk_get_by_name(np->parent, clk_name);
415 if (IS_ERR(tcbpwmc->clk))
416 tcbpwmc->clk = of_clk_get_by_name(np->parent, "t0_clk");
417 if (IS_ERR(tcbpwmc->clk)) {
418 err = PTR_ERR(tcbpwmc->clk);
419 goto err_slow_clk;
420 }
421
422 match = of_match_node(atmel_tcb_of_match, np->parent);
423 config = match->data;
424
425 if (config->has_gclk) {
426 tcbpwmc->gclk = of_clk_get_by_name(np->parent, "gclk");
427 if (IS_ERR(tcbpwmc->gclk)) {
428 err = PTR_ERR(tcbpwmc->gclk);
429 goto err_clk;
430 }
431 }
432
433 chip->ops = &atmel_tcb_pwm_ops;
434 tcbpwmc->channel = channel;
435 tcbpwmc->width = config->counter_width;
436
437 err = clk_prepare_enable(tcbpwmc->slow_clk);
438 if (err)
439 goto err_gclk;
440
441 spin_lock_init(&tcbpwmc->lock);
442
443 err = pwmchip_add(chip);
444 if (err < 0)
445 goto err_disable_clk;
446
447 platform_set_drvdata(pdev, chip);
448
449 return 0;
450
451err_disable_clk:
452 clk_disable_unprepare(tcbpwmc->slow_clk);
453
454err_gclk:
455 clk_put(tcbpwmc->gclk);
456
457err_clk:
458 clk_put(tcbpwmc->clk);
459
460err_slow_clk:
461 clk_put(tcbpwmc->slow_clk);
462
463 return err;
464}
465
466static void atmel_tcb_pwm_remove(struct platform_device *pdev)
467{
468 struct pwm_chip *chip = platform_get_drvdata(pdev);
469 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
470
471 pwmchip_remove(chip);
472
473 clk_disable_unprepare(tcbpwmc->slow_clk);
474 clk_put(tcbpwmc->gclk);
475 clk_put(tcbpwmc->clk);
476 clk_put(tcbpwmc->slow_clk);
477}
478
479static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
480 { .compatible = "atmel,tcb-pwm", },
481 { /* sentinel */ }
482};
483MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
484
485static int atmel_tcb_pwm_suspend(struct device *dev)
486{
487 struct pwm_chip *chip = dev_get_drvdata(dev);
488 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
489 struct atmel_tcb_channel *chan = &tcbpwmc->bkup;
490 unsigned int channel = tcbpwmc->channel;
491
492 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr);
493 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RA), &chan->ra);
494 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RB), &chan->rb);
495 regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RC), &chan->rc);
496
497 return 0;
498}
499
500static int atmel_tcb_pwm_resume(struct device *dev)
501{
502 struct pwm_chip *chip = dev_get_drvdata(dev);
503 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
504 struct atmel_tcb_channel *chan = &tcbpwmc->bkup;
505 unsigned int channel = tcbpwmc->channel;
506
507 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr);
508 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RA), chan->ra);
509 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RB), chan->rb);
510 regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RC), chan->rc);
511
512 if (chan->enabled)
513 regmap_write(tcbpwmc->regmap,
514 ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
515 ATMEL_TC_REG(channel, CCR));
516
517 return 0;
518}
519
520static DEFINE_SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
521 atmel_tcb_pwm_resume);
522
523static struct platform_driver atmel_tcb_pwm_driver = {
524 .driver = {
525 .name = "atmel-tcb-pwm",
526 .of_match_table = atmel_tcb_pwm_dt_ids,
527 .pm = pm_ptr(&atmel_tcb_pwm_pm_ops),
528 },
529 .probe = atmel_tcb_pwm_probe,
530 .remove = atmel_tcb_pwm_remove,
531};
532module_platform_driver(atmel_tcb_pwm_driver);
533
534MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
535MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
536MODULE_LICENSE("GPL v2");
1/*
2 * Copyright (C) Overkiz SAS 2012
3 *
4 * Author: Boris BREZILLON <b.brezillon@overkiz.com>
5 * License terms: GNU General Public License (GPL) version 2
6 */
7
8#include <linux/module.h>
9#include <linux/init.h>
10#include <linux/clocksource.h>
11#include <linux/clockchips.h>
12#include <linux/interrupt.h>
13#include <linux/irq.h>
14
15#include <linux/clk.h>
16#include <linux/err.h>
17#include <linux/ioport.h>
18#include <linux/io.h>
19#include <linux/platform_device.h>
20#include <linux/atmel_tc.h>
21#include <linux/pwm.h>
22#include <linux/of_device.h>
23#include <linux/slab.h>
24
25#define NPWM 6
26
27#define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \
28 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
29
30#define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \
31 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
32
33struct atmel_tcb_pwm_device {
34 enum pwm_polarity polarity; /* PWM polarity */
35 unsigned div; /* PWM clock divider */
36 unsigned duty; /* PWM duty expressed in clk cycles */
37 unsigned period; /* PWM period expressed in clk cycles */
38};
39
40struct atmel_tcb_pwm_chip {
41 struct pwm_chip chip;
42 spinlock_t lock;
43 struct atmel_tc *tc;
44 struct atmel_tcb_pwm_device *pwms[NPWM];
45};
46
47static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
48{
49 return container_of(chip, struct atmel_tcb_pwm_chip, chip);
50}
51
52static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip,
53 struct pwm_device *pwm,
54 enum pwm_polarity polarity)
55{
56 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
57
58 tcbpwm->polarity = polarity;
59
60 return 0;
61}
62
63static int atmel_tcb_pwm_request(struct pwm_chip *chip,
64 struct pwm_device *pwm)
65{
66 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
67 struct atmel_tcb_pwm_device *tcbpwm;
68 struct atmel_tc *tc = tcbpwmc->tc;
69 void __iomem *regs = tc->regs;
70 unsigned group = pwm->hwpwm / 2;
71 unsigned index = pwm->hwpwm % 2;
72 unsigned cmr;
73 int ret;
74
75 tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL);
76 if (!tcbpwm)
77 return -ENOMEM;
78
79 ret = clk_prepare_enable(tc->clk[group]);
80 if (ret) {
81 devm_kfree(chip->dev, tcbpwm);
82 return ret;
83 }
84
85 pwm_set_chip_data(pwm, tcbpwm);
86 tcbpwm->polarity = PWM_POLARITY_NORMAL;
87 tcbpwm->duty = 0;
88 tcbpwm->period = 0;
89 tcbpwm->div = 0;
90
91 spin_lock(&tcbpwmc->lock);
92 cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
93 /*
94 * Get init config from Timer Counter registers if
95 * Timer Counter is already configured as a PWM generator.
96 */
97 if (cmr & ATMEL_TC_WAVE) {
98 if (index == 0)
99 tcbpwm->duty =
100 __raw_readl(regs + ATMEL_TC_REG(group, RA));
101 else
102 tcbpwm->duty =
103 __raw_readl(regs + ATMEL_TC_REG(group, RB));
104
105 tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
106 tcbpwm->period = __raw_readl(regs + ATMEL_TC_REG(group, RC));
107 cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
108 ATMEL_TC_BCMR_MASK);
109 } else
110 cmr = 0;
111
112 cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
113 __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
114 spin_unlock(&tcbpwmc->lock);
115
116 tcbpwmc->pwms[pwm->hwpwm] = tcbpwm;
117
118 return 0;
119}
120
121static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
122{
123 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
124 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
125 struct atmel_tc *tc = tcbpwmc->tc;
126
127 clk_disable_unprepare(tc->clk[pwm->hwpwm / 2]);
128 tcbpwmc->pwms[pwm->hwpwm] = NULL;
129 devm_kfree(chip->dev, tcbpwm);
130}
131
132static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
133{
134 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
135 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
136 struct atmel_tc *tc = tcbpwmc->tc;
137 void __iomem *regs = tc->regs;
138 unsigned group = pwm->hwpwm / 2;
139 unsigned index = pwm->hwpwm % 2;
140 unsigned cmr;
141 enum pwm_polarity polarity = tcbpwm->polarity;
142
143 /*
144 * If duty is 0 the timer will be stopped and we have to
145 * configure the output correctly on software trigger:
146 * - set output to high if PWM_POLARITY_INVERSED
147 * - set output to low if PWM_POLARITY_NORMAL
148 *
149 * This is why we're reverting polarity in this case.
150 */
151 if (tcbpwm->duty == 0)
152 polarity = !polarity;
153
154 spin_lock(&tcbpwmc->lock);
155 cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
156
157 /* flush old setting and set the new one */
158 if (index == 0) {
159 cmr &= ~ATMEL_TC_ACMR_MASK;
160 if (polarity == PWM_POLARITY_INVERSED)
161 cmr |= ATMEL_TC_ASWTRG_CLEAR;
162 else
163 cmr |= ATMEL_TC_ASWTRG_SET;
164 } else {
165 cmr &= ~ATMEL_TC_BCMR_MASK;
166 if (polarity == PWM_POLARITY_INVERSED)
167 cmr |= ATMEL_TC_BSWTRG_CLEAR;
168 else
169 cmr |= ATMEL_TC_BSWTRG_SET;
170 }
171
172 __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
173
174 /*
175 * Use software trigger to apply the new setting.
176 * If both PWM devices in this group are disabled we stop the clock.
177 */
178 if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC)))
179 __raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS,
180 regs + ATMEL_TC_REG(group, CCR));
181 else
182 __raw_writel(ATMEL_TC_SWTRG, regs +
183 ATMEL_TC_REG(group, CCR));
184
185 spin_unlock(&tcbpwmc->lock);
186}
187
188static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
189{
190 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
191 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
192 struct atmel_tc *tc = tcbpwmc->tc;
193 void __iomem *regs = tc->regs;
194 unsigned group = pwm->hwpwm / 2;
195 unsigned index = pwm->hwpwm % 2;
196 u32 cmr;
197 enum pwm_polarity polarity = tcbpwm->polarity;
198
199 /*
200 * If duty is 0 the timer will be stopped and we have to
201 * configure the output correctly on software trigger:
202 * - set output to high if PWM_POLARITY_INVERSED
203 * - set output to low if PWM_POLARITY_NORMAL
204 *
205 * This is why we're reverting polarity in this case.
206 */
207 if (tcbpwm->duty == 0)
208 polarity = !polarity;
209
210 spin_lock(&tcbpwmc->lock);
211 cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR));
212
213 /* flush old setting and set the new one */
214 cmr &= ~ATMEL_TC_TCCLKS;
215
216 if (index == 0) {
217 cmr &= ~ATMEL_TC_ACMR_MASK;
218
219 /* Set CMR flags according to given polarity */
220 if (polarity == PWM_POLARITY_INVERSED)
221 cmr |= ATMEL_TC_ASWTRG_CLEAR;
222 else
223 cmr |= ATMEL_TC_ASWTRG_SET;
224 } else {
225 cmr &= ~ATMEL_TC_BCMR_MASK;
226 if (polarity == PWM_POLARITY_INVERSED)
227 cmr |= ATMEL_TC_BSWTRG_CLEAR;
228 else
229 cmr |= ATMEL_TC_BSWTRG_SET;
230 }
231
232 /*
233 * If duty is 0 or equal to period there's no need to register
234 * a specific action on RA/RB and RC compare.
235 * The output will be configured on software trigger and keep
236 * this config till next config call.
237 */
238 if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
239 if (index == 0) {
240 if (polarity == PWM_POLARITY_INVERSED)
241 cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
242 else
243 cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
244 } else {
245 if (polarity == PWM_POLARITY_INVERSED)
246 cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
247 else
248 cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
249 }
250 }
251
252 cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
253
254 __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR));
255
256 if (index == 0)
257 __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RA));
258 else
259 __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RB));
260
261 __raw_writel(tcbpwm->period, regs + ATMEL_TC_REG(group, RC));
262
263 /* Use software trigger to apply the new setting */
264 __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
265 regs + ATMEL_TC_REG(group, CCR));
266 spin_unlock(&tcbpwmc->lock);
267 return 0;
268}
269
270static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
271 int duty_ns, int period_ns)
272{
273 struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
274 struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm);
275 unsigned group = pwm->hwpwm / 2;
276 unsigned index = pwm->hwpwm % 2;
277 struct atmel_tcb_pwm_device *atcbpwm = NULL;
278 struct atmel_tc *tc = tcbpwmc->tc;
279 int i;
280 int slowclk = 0;
281 unsigned period;
282 unsigned duty;
283 unsigned rate = clk_get_rate(tc->clk[group]);
284 unsigned long long min;
285 unsigned long long max;
286
287 /*
288 * Find best clk divisor:
289 * the smallest divisor which can fulfill the period_ns requirements.
290 */
291 for (i = 0; i < 5; ++i) {
292 if (atmel_tc_divisors[i] == 0) {
293 slowclk = i;
294 continue;
295 }
296 min = div_u64((u64)NSEC_PER_SEC * atmel_tc_divisors[i], rate);
297 max = min << tc->tcb_config->counter_width;
298 if (max >= period_ns)
299 break;
300 }
301
302 /*
303 * If none of the divisor are small enough to represent period_ns
304 * take slow clock (32KHz).
305 */
306 if (i == 5) {
307 i = slowclk;
308 rate = clk_get_rate(tc->slow_clk);
309 min = div_u64(NSEC_PER_SEC, rate);
310 max = min << tc->tcb_config->counter_width;
311
312 /* If period is too big return ERANGE error */
313 if (max < period_ns)
314 return -ERANGE;
315 }
316
317 duty = div_u64(duty_ns, min);
318 period = div_u64(period_ns, min);
319
320 if (index == 0)
321 atcbpwm = tcbpwmc->pwms[pwm->hwpwm + 1];
322 else
323 atcbpwm = tcbpwmc->pwms[pwm->hwpwm - 1];
324
325 /*
326 * PWM devices provided by TCB driver are grouped by 2:
327 * - group 0: PWM 0 & 1
328 * - group 1: PWM 2 & 3
329 * - group 2: PWM 4 & 5
330 *
331 * PWM devices in a given group must be configured with the
332 * same period_ns.
333 *
334 * We're checking the period value of the second PWM device
335 * in this group before applying the new config.
336 */
337 if ((atcbpwm && atcbpwm->duty > 0 &&
338 atcbpwm->duty != atcbpwm->period) &&
339 (atcbpwm->div != i || atcbpwm->period != period)) {
340 dev_err(chip->dev,
341 "failed to configure period_ns: PWM group already configured with a different value\n");
342 return -EINVAL;
343 }
344
345 tcbpwm->period = period;
346 tcbpwm->div = i;
347 tcbpwm->duty = duty;
348
349 /* If the PWM is enabled, call enable to apply the new conf */
350 if (pwm_is_enabled(pwm))
351 atmel_tcb_pwm_enable(chip, pwm);
352
353 return 0;
354}
355
356static const struct pwm_ops atmel_tcb_pwm_ops = {
357 .request = atmel_tcb_pwm_request,
358 .free = atmel_tcb_pwm_free,
359 .config = atmel_tcb_pwm_config,
360 .set_polarity = atmel_tcb_pwm_set_polarity,
361 .enable = atmel_tcb_pwm_enable,
362 .disable = atmel_tcb_pwm_disable,
363 .owner = THIS_MODULE,
364};
365
366static int atmel_tcb_pwm_probe(struct platform_device *pdev)
367{
368 struct atmel_tcb_pwm_chip *tcbpwm;
369 struct device_node *np = pdev->dev.of_node;
370 struct atmel_tc *tc;
371 int err;
372 int tcblock;
373
374 err = of_property_read_u32(np, "tc-block", &tcblock);
375 if (err < 0) {
376 dev_err(&pdev->dev,
377 "failed to get Timer Counter Block number from device tree (error: %d)\n",
378 err);
379 return err;
380 }
381
382 tc = atmel_tc_alloc(tcblock);
383 if (tc == NULL) {
384 dev_err(&pdev->dev, "failed to allocate Timer Counter Block\n");
385 return -ENOMEM;
386 }
387
388 tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
389 if (tcbpwm == NULL) {
390 err = -ENOMEM;
391 dev_err(&pdev->dev, "failed to allocate memory\n");
392 goto err_free_tc;
393 }
394
395 tcbpwm->chip.dev = &pdev->dev;
396 tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
397 tcbpwm->chip.of_xlate = of_pwm_xlate_with_flags;
398 tcbpwm->chip.of_pwm_n_cells = 3;
399 tcbpwm->chip.base = -1;
400 tcbpwm->chip.npwm = NPWM;
401 tcbpwm->tc = tc;
402
403 err = clk_prepare_enable(tc->slow_clk);
404 if (err)
405 goto err_free_tc;
406
407 spin_lock_init(&tcbpwm->lock);
408
409 err = pwmchip_add(&tcbpwm->chip);
410 if (err < 0)
411 goto err_disable_clk;
412
413 platform_set_drvdata(pdev, tcbpwm);
414
415 return 0;
416
417err_disable_clk:
418 clk_disable_unprepare(tcbpwm->tc->slow_clk);
419
420err_free_tc:
421 atmel_tc_free(tc);
422
423 return err;
424}
425
426static int atmel_tcb_pwm_remove(struct platform_device *pdev)
427{
428 struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
429 int err;
430
431 clk_disable_unprepare(tcbpwm->tc->slow_clk);
432
433 err = pwmchip_remove(&tcbpwm->chip);
434 if (err < 0)
435 return err;
436
437 atmel_tc_free(tcbpwm->tc);
438
439 return 0;
440}
441
442static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
443 { .compatible = "atmel,tcb-pwm", },
444 { /* sentinel */ }
445};
446MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
447
448static struct platform_driver atmel_tcb_pwm_driver = {
449 .driver = {
450 .name = "atmel-tcb-pwm",
451 .of_match_table = atmel_tcb_pwm_dt_ids,
452 },
453 .probe = atmel_tcb_pwm_probe,
454 .remove = atmel_tcb_pwm_remove,
455};
456module_platform_driver(atmel_tcb_pwm_driver);
457
458MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
459MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
460MODULE_LICENSE("GPL v2");