Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
4 *
5 * Copyright (C) 2005 James Chapman (ds1337 core)
6 * Copyright (C) 2006 David Brownell
7 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
8 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
9 */
10
11#include <linux/bcd.h>
12#include <linux/i2c.h>
13#include <linux/init.h>
14#include <linux/kstrtox.h>
15#include <linux/mod_devicetable.h>
16#include <linux/module.h>
17#include <linux/property.h>
18#include <linux/rtc/ds1307.h>
19#include <linux/rtc.h>
20#include <linux/slab.h>
21#include <linux/string.h>
22#include <linux/hwmon.h>
23#include <linux/hwmon-sysfs.h>
24#include <linux/clk-provider.h>
25#include <linux/regmap.h>
26#include <linux/watchdog.h>
27
28/*
29 * We can't determine type by probing, but if we expect pre-Linux code
30 * to have set the chip up as a clock (turning on the oscillator and
31 * setting the date and time), Linux can ignore the non-clock features.
32 * That's a natural job for a factory or repair bench.
33 */
34enum ds_type {
35 unknown_ds_type, /* always first and 0 */
36 ds_1307,
37 ds_1308,
38 ds_1337,
39 ds_1338,
40 ds_1339,
41 ds_1340,
42 ds_1341,
43 ds_1388,
44 ds_3231,
45 m41t0,
46 m41t00,
47 m41t11,
48 mcp794xx,
49 rx_8025,
50 rx_8130,
51 last_ds_type /* always last */
52 /* rs5c372 too? different address... */
53};
54
55/* RTC registers don't differ much, except for the century flag */
56#define DS1307_REG_SECS 0x00 /* 00-59 */
57# define DS1307_BIT_CH 0x80
58# define DS1340_BIT_nEOSC 0x80
59# define MCP794XX_BIT_ST 0x80
60#define DS1307_REG_MIN 0x01 /* 00-59 */
61# define M41T0_BIT_OF 0x80
62#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
63# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
64# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
65# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
66# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
67#define DS1307_REG_WDAY 0x03 /* 01-07 */
68# define MCP794XX_BIT_OSCRUN BIT(5)
69# define MCP794XX_BIT_VBATEN 0x08
70#define DS1307_REG_MDAY 0x04 /* 01-31 */
71#define DS1307_REG_MONTH 0x05 /* 01-12 */
72# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
73#define DS1307_REG_YEAR 0x06 /* 00-99 */
74
75/*
76 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
77 * start at 7, and they differ a LOT. Only control and status matter for
78 * basic RTC date and time functionality; be careful using them.
79 */
80#define DS1307_REG_CONTROL 0x07 /* or ds1338 */
81# define DS1307_BIT_OUT 0x80
82# define DS1338_BIT_OSF 0x20
83# define DS1307_BIT_SQWE 0x10
84# define DS1307_BIT_RS1 0x02
85# define DS1307_BIT_RS0 0x01
86#define DS1337_REG_CONTROL 0x0e
87# define DS1337_BIT_nEOSC 0x80
88# define DS1339_BIT_BBSQI 0x20
89# define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
90# define DS1337_BIT_RS2 0x10
91# define DS1337_BIT_RS1 0x08
92# define DS1337_BIT_INTCN 0x04
93# define DS1337_BIT_A2IE 0x02
94# define DS1337_BIT_A1IE 0x01
95#define DS1340_REG_CONTROL 0x07
96# define DS1340_BIT_OUT 0x80
97# define DS1340_BIT_FT 0x40
98# define DS1340_BIT_CALIB_SIGN 0x20
99# define DS1340_M_CALIBRATION 0x1f
100#define DS1340_REG_FLAG 0x09
101# define DS1340_BIT_OSF 0x80
102#define DS1337_REG_STATUS 0x0f
103# define DS1337_BIT_OSF 0x80
104# define DS3231_BIT_EN32KHZ 0x08
105# define DS1337_BIT_A2I 0x02
106# define DS1337_BIT_A1I 0x01
107#define DS1339_REG_ALARM1_SECS 0x07
108
109#define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
110
111#define RX8025_REG_CTRL1 0x0e
112# define RX8025_BIT_2412 0x20
113#define RX8025_REG_CTRL2 0x0f
114# define RX8025_BIT_PON 0x10
115# define RX8025_BIT_VDET 0x40
116# define RX8025_BIT_XST 0x20
117
118#define RX8130_REG_ALARM_MIN 0x17
119#define RX8130_REG_ALARM_HOUR 0x18
120#define RX8130_REG_ALARM_WEEK_OR_DAY 0x19
121#define RX8130_REG_EXTENSION 0x1c
122#define RX8130_REG_EXTENSION_WADA BIT(3)
123#define RX8130_REG_FLAG 0x1d
124#define RX8130_REG_FLAG_VLF BIT(1)
125#define RX8130_REG_FLAG_AF BIT(3)
126#define RX8130_REG_CONTROL0 0x1e
127#define RX8130_REG_CONTROL0_AIE BIT(3)
128#define RX8130_REG_CONTROL1 0x1f
129#define RX8130_REG_CONTROL1_INIEN BIT(4)
130#define RX8130_REG_CONTROL1_CHGEN BIT(5)
131
132#define MCP794XX_REG_CONTROL 0x07
133# define MCP794XX_BIT_ALM0_EN 0x10
134# define MCP794XX_BIT_ALM1_EN 0x20
135#define MCP794XX_REG_ALARM0_BASE 0x0a
136#define MCP794XX_REG_ALARM0_CTRL 0x0d
137#define MCP794XX_REG_ALARM1_BASE 0x11
138#define MCP794XX_REG_ALARM1_CTRL 0x14
139# define MCP794XX_BIT_ALMX_IF BIT(3)
140# define MCP794XX_BIT_ALMX_C0 BIT(4)
141# define MCP794XX_BIT_ALMX_C1 BIT(5)
142# define MCP794XX_BIT_ALMX_C2 BIT(6)
143# define MCP794XX_BIT_ALMX_POL BIT(7)
144# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
145 MCP794XX_BIT_ALMX_C1 | \
146 MCP794XX_BIT_ALMX_C2)
147
148#define M41TXX_REG_CONTROL 0x07
149# define M41TXX_BIT_OUT BIT(7)
150# define M41TXX_BIT_FT BIT(6)
151# define M41TXX_BIT_CALIB_SIGN BIT(5)
152# define M41TXX_M_CALIBRATION GENMASK(4, 0)
153
154#define DS1388_REG_WDOG_HUN_SECS 0x08
155#define DS1388_REG_WDOG_SECS 0x09
156#define DS1388_REG_FLAG 0x0b
157# define DS1388_BIT_WF BIT(6)
158# define DS1388_BIT_OSF BIT(7)
159#define DS1388_REG_CONTROL 0x0c
160# define DS1388_BIT_RST BIT(0)
161# define DS1388_BIT_WDE BIT(1)
162# define DS1388_BIT_nEOSC BIT(7)
163
164/* negative offset step is -2.034ppm */
165#define M41TXX_NEG_OFFSET_STEP_PPB 2034
166/* positive offset step is +4.068ppm */
167#define M41TXX_POS_OFFSET_STEP_PPB 4068
168/* Min and max values supported with 'offset' interface by M41TXX */
169#define M41TXX_MIN_OFFSET ((-31) * M41TXX_NEG_OFFSET_STEP_PPB)
170#define M41TXX_MAX_OFFSET ((31) * M41TXX_POS_OFFSET_STEP_PPB)
171
172struct ds1307 {
173 enum ds_type type;
174 struct device *dev;
175 struct regmap *regmap;
176 const char *name;
177 struct rtc_device *rtc;
178#ifdef CONFIG_COMMON_CLK
179 struct clk_hw clks[2];
180#endif
181};
182
183struct chip_desc {
184 unsigned alarm:1;
185 u16 nvram_offset;
186 u16 nvram_size;
187 u8 offset; /* register's offset */
188 u8 century_reg;
189 u8 century_enable_bit;
190 u8 century_bit;
191 u8 bbsqi_bit;
192 irq_handler_t irq_handler;
193 const struct rtc_class_ops *rtc_ops;
194 u16 trickle_charger_reg;
195 u8 (*do_trickle_setup)(struct ds1307 *, u32,
196 bool);
197 /* Does the RTC require trickle-resistor-ohms to select the value of
198 * the resistor between Vcc and Vbackup?
199 */
200 bool requires_trickle_resistor;
201 /* Some RTC's batteries and supercaps were charged by default, others
202 * allow charging but were not configured previously to do so.
203 * Remember this behavior to stay backwards compatible.
204 */
205 bool charge_default;
206};
207
208static const struct chip_desc chips[last_ds_type];
209
210static int ds1307_get_time(struct device *dev, struct rtc_time *t)
211{
212 struct ds1307 *ds1307 = dev_get_drvdata(dev);
213 int tmp, ret;
214 const struct chip_desc *chip = &chips[ds1307->type];
215 u8 regs[7];
216
217 if (ds1307->type == rx_8130) {
218 unsigned int regflag;
219 ret = regmap_read(ds1307->regmap, RX8130_REG_FLAG, ®flag);
220 if (ret) {
221 dev_err(dev, "%s error %d\n", "read", ret);
222 return ret;
223 }
224
225 if (regflag & RX8130_REG_FLAG_VLF) {
226 dev_warn_once(dev, "oscillator failed, set time!\n");
227 return -EINVAL;
228 }
229 }
230
231 /* read the RTC date and time registers all at once */
232 ret = regmap_bulk_read(ds1307->regmap, chip->offset, regs,
233 sizeof(regs));
234 if (ret) {
235 dev_err(dev, "%s error %d\n", "read", ret);
236 return ret;
237 }
238
239 dev_dbg(dev, "%s: %7ph\n", "read", regs);
240
241 /* if oscillator fail bit is set, no data can be trusted */
242 if (ds1307->type == m41t0 &&
243 regs[DS1307_REG_MIN] & M41T0_BIT_OF) {
244 dev_warn_once(dev, "oscillator failed, set time!\n");
245 return -EINVAL;
246 } else if (ds1307->type == mcp794xx &&
247 !(regs[DS1307_REG_WDAY] & MCP794XX_BIT_OSCRUN)) {
248 dev_warn_once(dev, "oscillator failed, set time!\n");
249 return -EINVAL;
250 }
251
252 tmp = regs[DS1307_REG_SECS];
253 switch (ds1307->type) {
254 case ds_1307:
255 case m41t0:
256 case m41t00:
257 case m41t11:
258 if (tmp & DS1307_BIT_CH)
259 return -EINVAL;
260 break;
261 case ds_1308:
262 case ds_1338:
263 if (tmp & DS1307_BIT_CH)
264 return -EINVAL;
265
266 ret = regmap_read(ds1307->regmap, DS1307_REG_CONTROL, &tmp);
267 if (ret)
268 return ret;
269 if (tmp & DS1338_BIT_OSF)
270 return -EINVAL;
271 break;
272 case ds_1340:
273 if (tmp & DS1340_BIT_nEOSC)
274 return -EINVAL;
275
276 ret = regmap_read(ds1307->regmap, DS1340_REG_FLAG, &tmp);
277 if (ret)
278 return ret;
279 if (tmp & DS1340_BIT_OSF)
280 return -EINVAL;
281 break;
282 case ds_1388:
283 ret = regmap_read(ds1307->regmap, DS1388_REG_FLAG, &tmp);
284 if (ret)
285 return ret;
286 if (tmp & DS1388_BIT_OSF)
287 return -EINVAL;
288 break;
289 case mcp794xx:
290 if (!(tmp & MCP794XX_BIT_ST))
291 return -EINVAL;
292
293 break;
294 default:
295 break;
296 }
297
298 t->tm_sec = bcd2bin(regs[DS1307_REG_SECS] & 0x7f);
299 t->tm_min = bcd2bin(regs[DS1307_REG_MIN] & 0x7f);
300 tmp = regs[DS1307_REG_HOUR] & 0x3f;
301 t->tm_hour = bcd2bin(tmp);
302 /* rx8130 is bit position, not BCD */
303 if (ds1307->type == rx_8130)
304 t->tm_wday = fls(regs[DS1307_REG_WDAY] & 0x7f);
305 else
306 t->tm_wday = bcd2bin(regs[DS1307_REG_WDAY] & 0x07) - 1;
307 t->tm_mday = bcd2bin(regs[DS1307_REG_MDAY] & 0x3f);
308 tmp = regs[DS1307_REG_MONTH] & 0x1f;
309 t->tm_mon = bcd2bin(tmp) - 1;
310 t->tm_year = bcd2bin(regs[DS1307_REG_YEAR]) + 100;
311
312 if (regs[chip->century_reg] & chip->century_bit &&
313 IS_ENABLED(CONFIG_RTC_DRV_DS1307_CENTURY))
314 t->tm_year += 100;
315
316 dev_dbg(dev, "%s secs=%d, mins=%d, "
317 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
318 "read", t->tm_sec, t->tm_min,
319 t->tm_hour, t->tm_mday,
320 t->tm_mon, t->tm_year, t->tm_wday);
321
322 return 0;
323}
324
325static int ds1307_set_time(struct device *dev, struct rtc_time *t)
326{
327 struct ds1307 *ds1307 = dev_get_drvdata(dev);
328 const struct chip_desc *chip = &chips[ds1307->type];
329 int result;
330 int tmp;
331 u8 regs[7];
332
333 dev_dbg(dev, "%s secs=%d, mins=%d, "
334 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
335 "write", t->tm_sec, t->tm_min,
336 t->tm_hour, t->tm_mday,
337 t->tm_mon, t->tm_year, t->tm_wday);
338
339 if (t->tm_year < 100)
340 return -EINVAL;
341
342#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
343 if (t->tm_year > (chip->century_bit ? 299 : 199))
344 return -EINVAL;
345#else
346 if (t->tm_year > 199)
347 return -EINVAL;
348#endif
349
350 regs[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
351 regs[DS1307_REG_MIN] = bin2bcd(t->tm_min);
352 regs[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
353 /* rx8130 is bit position, not BCD */
354 if (ds1307->type == rx_8130)
355 regs[DS1307_REG_WDAY] = 1 << t->tm_wday;
356 else
357 regs[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
358 regs[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
359 regs[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
360
361 /* assume 20YY not 19YY */
362 tmp = t->tm_year % 100;
363 regs[DS1307_REG_YEAR] = bin2bcd(tmp);
364
365 if (chip->century_enable_bit)
366 regs[chip->century_reg] |= chip->century_enable_bit;
367 if (t->tm_year > 199 && chip->century_bit)
368 regs[chip->century_reg] |= chip->century_bit;
369
370 switch (ds1307->type) {
371 case ds_1308:
372 case ds_1338:
373 regmap_update_bits(ds1307->regmap, DS1307_REG_CONTROL,
374 DS1338_BIT_OSF, 0);
375 break;
376 case ds_1340:
377 regmap_update_bits(ds1307->regmap, DS1340_REG_FLAG,
378 DS1340_BIT_OSF, 0);
379 break;
380 case ds_1388:
381 regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
382 DS1388_BIT_OSF, 0);
383 break;
384 case mcp794xx:
385 /*
386 * these bits were cleared when preparing the date/time
387 * values and need to be set again before writing the
388 * regsfer out to the device.
389 */
390 regs[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
391 regs[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
392 break;
393 default:
394 break;
395 }
396
397 dev_dbg(dev, "%s: %7ph\n", "write", regs);
398
399 result = regmap_bulk_write(ds1307->regmap, chip->offset, regs,
400 sizeof(regs));
401 if (result) {
402 dev_err(dev, "%s error %d\n", "write", result);
403 return result;
404 }
405
406 if (ds1307->type == rx_8130) {
407 /* clear Voltage Loss Flag as data is available now */
408 result = regmap_write(ds1307->regmap, RX8130_REG_FLAG,
409 ~(u8)RX8130_REG_FLAG_VLF);
410 if (result) {
411 dev_err(dev, "%s error %d\n", "write", result);
412 return result;
413 }
414 }
415
416 return 0;
417}
418
419static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
420{
421 struct ds1307 *ds1307 = dev_get_drvdata(dev);
422 int ret;
423 u8 regs[9];
424
425 /* read all ALARM1, ALARM2, and status registers at once */
426 ret = regmap_bulk_read(ds1307->regmap, DS1339_REG_ALARM1_SECS,
427 regs, sizeof(regs));
428 if (ret) {
429 dev_err(dev, "%s error %d\n", "alarm read", ret);
430 return ret;
431 }
432
433 dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
434 ®s[0], ®s[4], ®s[7]);
435
436 /*
437 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
438 * and that all four fields are checked matches
439 */
440 t->time.tm_sec = bcd2bin(regs[0] & 0x7f);
441 t->time.tm_min = bcd2bin(regs[1] & 0x7f);
442 t->time.tm_hour = bcd2bin(regs[2] & 0x3f);
443 t->time.tm_mday = bcd2bin(regs[3] & 0x3f);
444
445 /* ... and status */
446 t->enabled = !!(regs[7] & DS1337_BIT_A1IE);
447 t->pending = !!(regs[8] & DS1337_BIT_A1I);
448
449 dev_dbg(dev, "%s secs=%d, mins=%d, "
450 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
451 "alarm read", t->time.tm_sec, t->time.tm_min,
452 t->time.tm_hour, t->time.tm_mday,
453 t->enabled, t->pending);
454
455 return 0;
456}
457
458static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
459{
460 struct ds1307 *ds1307 = dev_get_drvdata(dev);
461 unsigned char regs[9];
462 u8 control, status;
463 int ret;
464
465 dev_dbg(dev, "%s secs=%d, mins=%d, "
466 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
467 "alarm set", t->time.tm_sec, t->time.tm_min,
468 t->time.tm_hour, t->time.tm_mday,
469 t->enabled, t->pending);
470
471 /* read current status of both alarms and the chip */
472 ret = regmap_bulk_read(ds1307->regmap, DS1339_REG_ALARM1_SECS, regs,
473 sizeof(regs));
474 if (ret) {
475 dev_err(dev, "%s error %d\n", "alarm write", ret);
476 return ret;
477 }
478 control = regs[7];
479 status = regs[8];
480
481 dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
482 ®s[0], ®s[4], control, status);
483
484 /* set ALARM1, using 24 hour and day-of-month modes */
485 regs[0] = bin2bcd(t->time.tm_sec);
486 regs[1] = bin2bcd(t->time.tm_min);
487 regs[2] = bin2bcd(t->time.tm_hour);
488 regs[3] = bin2bcd(t->time.tm_mday);
489
490 /* set ALARM2 to non-garbage */
491 regs[4] = 0;
492 regs[5] = 0;
493 regs[6] = 0;
494
495 /* disable alarms */
496 regs[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
497 regs[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
498
499 ret = regmap_bulk_write(ds1307->regmap, DS1339_REG_ALARM1_SECS, regs,
500 sizeof(regs));
501 if (ret) {
502 dev_err(dev, "can't set alarm time\n");
503 return ret;
504 }
505
506 /* optionally enable ALARM1 */
507 if (t->enabled) {
508 dev_dbg(dev, "alarm IRQ armed\n");
509 regs[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
510 regmap_write(ds1307->regmap, DS1337_REG_CONTROL, regs[7]);
511 }
512
513 return 0;
514}
515
516static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
517{
518 struct ds1307 *ds1307 = dev_get_drvdata(dev);
519
520 return regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
521 DS1337_BIT_A1IE,
522 enabled ? DS1337_BIT_A1IE : 0);
523}
524
525static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
526{
527 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
528 DS1307_TRICKLE_CHARGER_NO_DIODE;
529
530 setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
531
532 switch (ohms) {
533 case 250:
534 setup |= DS1307_TRICKLE_CHARGER_250_OHM;
535 break;
536 case 2000:
537 setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
538 break;
539 case 4000:
540 setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
541 break;
542 default:
543 dev_warn(ds1307->dev,
544 "Unsupported ohm value %u in dt\n", ohms);
545 return 0;
546 }
547 return setup;
548}
549
550static u8 do_trickle_setup_rx8130(struct ds1307 *ds1307, u32 ohms, bool diode)
551{
552 /* make sure that the backup battery is enabled */
553 u8 setup = RX8130_REG_CONTROL1_INIEN;
554 if (diode)
555 setup |= RX8130_REG_CONTROL1_CHGEN;
556
557 return setup;
558}
559
560static irqreturn_t rx8130_irq(int irq, void *dev_id)
561{
562 struct ds1307 *ds1307 = dev_id;
563 u8 ctl[3];
564 int ret;
565
566 rtc_lock(ds1307->rtc);
567
568 /* Read control registers. */
569 ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
570 sizeof(ctl));
571 if (ret < 0)
572 goto out;
573 if (!(ctl[1] & RX8130_REG_FLAG_AF))
574 goto out;
575 ctl[1] &= ~RX8130_REG_FLAG_AF;
576 ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
577
578 ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
579 sizeof(ctl));
580 if (ret < 0)
581 goto out;
582
583 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
584
585out:
586 rtc_unlock(ds1307->rtc);
587
588 return IRQ_HANDLED;
589}
590
591static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t)
592{
593 struct ds1307 *ds1307 = dev_get_drvdata(dev);
594 u8 ald[3], ctl[3];
595 int ret;
596
597 /* Read alarm registers. */
598 ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_ALARM_MIN, ald,
599 sizeof(ald));
600 if (ret < 0)
601 return ret;
602
603 /* Read control registers. */
604 ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
605 sizeof(ctl));
606 if (ret < 0)
607 return ret;
608
609 t->enabled = !!(ctl[2] & RX8130_REG_CONTROL0_AIE);
610 t->pending = !!(ctl[1] & RX8130_REG_FLAG_AF);
611
612 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
613 t->time.tm_sec = -1;
614 t->time.tm_min = bcd2bin(ald[0] & 0x7f);
615 t->time.tm_hour = bcd2bin(ald[1] & 0x7f);
616 t->time.tm_wday = -1;
617 t->time.tm_mday = bcd2bin(ald[2] & 0x7f);
618 t->time.tm_mon = -1;
619 t->time.tm_year = -1;
620 t->time.tm_yday = -1;
621 t->time.tm_isdst = -1;
622
623 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d enabled=%d\n",
624 __func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
625 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled);
626
627 return 0;
628}
629
630static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)
631{
632 struct ds1307 *ds1307 = dev_get_drvdata(dev);
633 u8 ald[3], ctl[3];
634 int ret;
635
636 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
637 "enabled=%d pending=%d\n", __func__,
638 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
639 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
640 t->enabled, t->pending);
641
642 /* Read control registers. */
643 ret = regmap_bulk_read(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
644 sizeof(ctl));
645 if (ret < 0)
646 return ret;
647
648 ctl[0] &= RX8130_REG_EXTENSION_WADA;
649 ctl[1] &= ~RX8130_REG_FLAG_AF;
650 ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
651
652 ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_EXTENSION, ctl,
653 sizeof(ctl));
654 if (ret < 0)
655 return ret;
656
657 /* Hardware alarm precision is 1 minute! */
658 ald[0] = bin2bcd(t->time.tm_min);
659 ald[1] = bin2bcd(t->time.tm_hour);
660 ald[2] = bin2bcd(t->time.tm_mday);
661
662 ret = regmap_bulk_write(ds1307->regmap, RX8130_REG_ALARM_MIN, ald,
663 sizeof(ald));
664 if (ret < 0)
665 return ret;
666
667 if (!t->enabled)
668 return 0;
669
670 ctl[2] |= RX8130_REG_CONTROL0_AIE;
671
672 return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, ctl[2]);
673}
674
675static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)
676{
677 struct ds1307 *ds1307 = dev_get_drvdata(dev);
678 int ret, reg;
679
680 ret = regmap_read(ds1307->regmap, RX8130_REG_CONTROL0, ®);
681 if (ret < 0)
682 return ret;
683
684 if (enabled)
685 reg |= RX8130_REG_CONTROL0_AIE;
686 else
687 reg &= ~RX8130_REG_CONTROL0_AIE;
688
689 return regmap_write(ds1307->regmap, RX8130_REG_CONTROL0, reg);
690}
691
692static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
693{
694 struct ds1307 *ds1307 = dev_id;
695 struct mutex *lock = &ds1307->rtc->ops_lock;
696 int reg, ret;
697
698 mutex_lock(lock);
699
700 /* Check and clear alarm 0 interrupt flag. */
701 ret = regmap_read(ds1307->regmap, MCP794XX_REG_ALARM0_CTRL, ®);
702 if (ret)
703 goto out;
704 if (!(reg & MCP794XX_BIT_ALMX_IF))
705 goto out;
706 reg &= ~MCP794XX_BIT_ALMX_IF;
707 ret = regmap_write(ds1307->regmap, MCP794XX_REG_ALARM0_CTRL, reg);
708 if (ret)
709 goto out;
710
711 /* Disable alarm 0. */
712 ret = regmap_update_bits(ds1307->regmap, MCP794XX_REG_CONTROL,
713 MCP794XX_BIT_ALM0_EN, 0);
714 if (ret)
715 goto out;
716
717 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
718
719out:
720 mutex_unlock(lock);
721
722 return IRQ_HANDLED;
723}
724
725static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
726{
727 struct ds1307 *ds1307 = dev_get_drvdata(dev);
728 u8 regs[10];
729 int ret;
730
731 /* Read control and alarm 0 registers. */
732 ret = regmap_bulk_read(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
733 sizeof(regs));
734 if (ret)
735 return ret;
736
737 t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
738
739 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
740 t->time.tm_sec = bcd2bin(regs[3] & 0x7f);
741 t->time.tm_min = bcd2bin(regs[4] & 0x7f);
742 t->time.tm_hour = bcd2bin(regs[5] & 0x3f);
743 t->time.tm_wday = bcd2bin(regs[6] & 0x7) - 1;
744 t->time.tm_mday = bcd2bin(regs[7] & 0x3f);
745 t->time.tm_mon = bcd2bin(regs[8] & 0x1f) - 1;
746 t->time.tm_year = -1;
747 t->time.tm_yday = -1;
748 t->time.tm_isdst = -1;
749
750 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
751 "enabled=%d polarity=%d irq=%d match=%lu\n", __func__,
752 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
753 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
754 !!(regs[6] & MCP794XX_BIT_ALMX_POL),
755 !!(regs[6] & MCP794XX_BIT_ALMX_IF),
756 (regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
757
758 return 0;
759}
760
761/*
762 * We may have a random RTC weekday, therefore calculate alarm weekday based
763 * on current weekday we read from the RTC timekeeping regs
764 */
765static int mcp794xx_alm_weekday(struct device *dev, struct rtc_time *tm_alarm)
766{
767 struct rtc_time tm_now;
768 int days_now, days_alarm, ret;
769
770 ret = ds1307_get_time(dev, &tm_now);
771 if (ret)
772 return ret;
773
774 days_now = div_s64(rtc_tm_to_time64(&tm_now), 24 * 60 * 60);
775 days_alarm = div_s64(rtc_tm_to_time64(tm_alarm), 24 * 60 * 60);
776
777 return (tm_now.tm_wday + days_alarm - days_now) % 7 + 1;
778}
779
780static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
781{
782 struct ds1307 *ds1307 = dev_get_drvdata(dev);
783 unsigned char regs[10];
784 int wday, ret;
785
786 wday = mcp794xx_alm_weekday(dev, &t->time);
787 if (wday < 0)
788 return wday;
789
790 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
791 "enabled=%d pending=%d\n", __func__,
792 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
793 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
794 t->enabled, t->pending);
795
796 /* Read control and alarm 0 registers. */
797 ret = regmap_bulk_read(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
798 sizeof(regs));
799 if (ret)
800 return ret;
801
802 /* Set alarm 0, using 24-hour and day-of-month modes. */
803 regs[3] = bin2bcd(t->time.tm_sec);
804 regs[4] = bin2bcd(t->time.tm_min);
805 regs[5] = bin2bcd(t->time.tm_hour);
806 regs[6] = wday;
807 regs[7] = bin2bcd(t->time.tm_mday);
808 regs[8] = bin2bcd(t->time.tm_mon + 1);
809
810 /* Clear the alarm 0 interrupt flag. */
811 regs[6] &= ~MCP794XX_BIT_ALMX_IF;
812 /* Set alarm match: second, minute, hour, day, date, month. */
813 regs[6] |= MCP794XX_MSK_ALMX_MATCH;
814 /* Disable interrupt. We will not enable until completely programmed */
815 regs[0] &= ~MCP794XX_BIT_ALM0_EN;
816
817 ret = regmap_bulk_write(ds1307->regmap, MCP794XX_REG_CONTROL, regs,
818 sizeof(regs));
819 if (ret)
820 return ret;
821
822 if (!t->enabled)
823 return 0;
824 regs[0] |= MCP794XX_BIT_ALM0_EN;
825 return regmap_write(ds1307->regmap, MCP794XX_REG_CONTROL, regs[0]);
826}
827
828static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
829{
830 struct ds1307 *ds1307 = dev_get_drvdata(dev);
831
832 return regmap_update_bits(ds1307->regmap, MCP794XX_REG_CONTROL,
833 MCP794XX_BIT_ALM0_EN,
834 enabled ? MCP794XX_BIT_ALM0_EN : 0);
835}
836
837static int m41txx_rtc_read_offset(struct device *dev, long *offset)
838{
839 struct ds1307 *ds1307 = dev_get_drvdata(dev);
840 unsigned int ctrl_reg;
841 u8 val;
842
843 regmap_read(ds1307->regmap, M41TXX_REG_CONTROL, &ctrl_reg);
844
845 val = ctrl_reg & M41TXX_M_CALIBRATION;
846
847 /* check if positive */
848 if (ctrl_reg & M41TXX_BIT_CALIB_SIGN)
849 *offset = (val * M41TXX_POS_OFFSET_STEP_PPB);
850 else
851 *offset = -(val * M41TXX_NEG_OFFSET_STEP_PPB);
852
853 return 0;
854}
855
856static int m41txx_rtc_set_offset(struct device *dev, long offset)
857{
858 struct ds1307 *ds1307 = dev_get_drvdata(dev);
859 unsigned int ctrl_reg;
860
861 if ((offset < M41TXX_MIN_OFFSET) || (offset > M41TXX_MAX_OFFSET))
862 return -ERANGE;
863
864 if (offset >= 0) {
865 ctrl_reg = DIV_ROUND_CLOSEST(offset,
866 M41TXX_POS_OFFSET_STEP_PPB);
867 ctrl_reg |= M41TXX_BIT_CALIB_SIGN;
868 } else {
869 ctrl_reg = DIV_ROUND_CLOSEST(abs(offset),
870 M41TXX_NEG_OFFSET_STEP_PPB);
871 }
872
873 return regmap_update_bits(ds1307->regmap, M41TXX_REG_CONTROL,
874 M41TXX_M_CALIBRATION | M41TXX_BIT_CALIB_SIGN,
875 ctrl_reg);
876}
877
878#ifdef CONFIG_WATCHDOG_CORE
879static int ds1388_wdt_start(struct watchdog_device *wdt_dev)
880{
881 struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
882 u8 regs[2];
883 int ret;
884
885 ret = regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
886 DS1388_BIT_WF, 0);
887 if (ret)
888 return ret;
889
890 ret = regmap_update_bits(ds1307->regmap, DS1388_REG_CONTROL,
891 DS1388_BIT_WDE | DS1388_BIT_RST, 0);
892 if (ret)
893 return ret;
894
895 /*
896 * watchdog timeouts are measured in seconds. So ignore hundredths of
897 * seconds field.
898 */
899 regs[0] = 0;
900 regs[1] = bin2bcd(wdt_dev->timeout);
901
902 ret = regmap_bulk_write(ds1307->regmap, DS1388_REG_WDOG_HUN_SECS, regs,
903 sizeof(regs));
904 if (ret)
905 return ret;
906
907 return regmap_update_bits(ds1307->regmap, DS1388_REG_CONTROL,
908 DS1388_BIT_WDE | DS1388_BIT_RST,
909 DS1388_BIT_WDE | DS1388_BIT_RST);
910}
911
912static int ds1388_wdt_stop(struct watchdog_device *wdt_dev)
913{
914 struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
915
916 return regmap_update_bits(ds1307->regmap, DS1388_REG_CONTROL,
917 DS1388_BIT_WDE | DS1388_BIT_RST, 0);
918}
919
920static int ds1388_wdt_ping(struct watchdog_device *wdt_dev)
921{
922 struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
923 u8 regs[2];
924
925 return regmap_bulk_read(ds1307->regmap, DS1388_REG_WDOG_HUN_SECS, regs,
926 sizeof(regs));
927}
928
929static int ds1388_wdt_set_timeout(struct watchdog_device *wdt_dev,
930 unsigned int val)
931{
932 struct ds1307 *ds1307 = watchdog_get_drvdata(wdt_dev);
933 u8 regs[2];
934
935 wdt_dev->timeout = val;
936 regs[0] = 0;
937 regs[1] = bin2bcd(wdt_dev->timeout);
938
939 return regmap_bulk_write(ds1307->regmap, DS1388_REG_WDOG_HUN_SECS, regs,
940 sizeof(regs));
941}
942#endif
943
944static const struct rtc_class_ops rx8130_rtc_ops = {
945 .read_time = ds1307_get_time,
946 .set_time = ds1307_set_time,
947 .read_alarm = rx8130_read_alarm,
948 .set_alarm = rx8130_set_alarm,
949 .alarm_irq_enable = rx8130_alarm_irq_enable,
950};
951
952static const struct rtc_class_ops mcp794xx_rtc_ops = {
953 .read_time = ds1307_get_time,
954 .set_time = ds1307_set_time,
955 .read_alarm = mcp794xx_read_alarm,
956 .set_alarm = mcp794xx_set_alarm,
957 .alarm_irq_enable = mcp794xx_alarm_irq_enable,
958};
959
960static const struct rtc_class_ops m41txx_rtc_ops = {
961 .read_time = ds1307_get_time,
962 .set_time = ds1307_set_time,
963 .read_alarm = ds1337_read_alarm,
964 .set_alarm = ds1337_set_alarm,
965 .alarm_irq_enable = ds1307_alarm_irq_enable,
966 .read_offset = m41txx_rtc_read_offset,
967 .set_offset = m41txx_rtc_set_offset,
968};
969
970static const struct chip_desc chips[last_ds_type] = {
971 [ds_1307] = {
972 .nvram_offset = 8,
973 .nvram_size = 56,
974 },
975 [ds_1308] = {
976 .nvram_offset = 8,
977 .nvram_size = 56,
978 },
979 [ds_1337] = {
980 .alarm = 1,
981 .century_reg = DS1307_REG_MONTH,
982 .century_bit = DS1337_BIT_CENTURY,
983 },
984 [ds_1338] = {
985 .nvram_offset = 8,
986 .nvram_size = 56,
987 },
988 [ds_1339] = {
989 .alarm = 1,
990 .century_reg = DS1307_REG_MONTH,
991 .century_bit = DS1337_BIT_CENTURY,
992 .bbsqi_bit = DS1339_BIT_BBSQI,
993 .trickle_charger_reg = 0x10,
994 .do_trickle_setup = &do_trickle_setup_ds1339,
995 .requires_trickle_resistor = true,
996 .charge_default = true,
997 },
998 [ds_1340] = {
999 .century_reg = DS1307_REG_HOUR,
1000 .century_enable_bit = DS1340_BIT_CENTURY_EN,
1001 .century_bit = DS1340_BIT_CENTURY,
1002 .do_trickle_setup = &do_trickle_setup_ds1339,
1003 .trickle_charger_reg = 0x08,
1004 .requires_trickle_resistor = true,
1005 .charge_default = true,
1006 },
1007 [ds_1341] = {
1008 .century_reg = DS1307_REG_MONTH,
1009 .century_bit = DS1337_BIT_CENTURY,
1010 },
1011 [ds_1388] = {
1012 .offset = 1,
1013 .trickle_charger_reg = 0x0a,
1014 },
1015 [ds_3231] = {
1016 .alarm = 1,
1017 .century_reg = DS1307_REG_MONTH,
1018 .century_bit = DS1337_BIT_CENTURY,
1019 .bbsqi_bit = DS3231_BIT_BBSQW,
1020 },
1021 [rx_8130] = {
1022 .alarm = 1,
1023 /* this is battery backed SRAM */
1024 .nvram_offset = 0x20,
1025 .nvram_size = 4, /* 32bit (4 word x 8 bit) */
1026 .offset = 0x10,
1027 .irq_handler = rx8130_irq,
1028 .rtc_ops = &rx8130_rtc_ops,
1029 .trickle_charger_reg = RX8130_REG_CONTROL1,
1030 .do_trickle_setup = &do_trickle_setup_rx8130,
1031 },
1032 [m41t0] = {
1033 .rtc_ops = &m41txx_rtc_ops,
1034 },
1035 [m41t00] = {
1036 .rtc_ops = &m41txx_rtc_ops,
1037 },
1038 [m41t11] = {
1039 /* this is battery backed SRAM */
1040 .nvram_offset = 8,
1041 .nvram_size = 56,
1042 .rtc_ops = &m41txx_rtc_ops,
1043 },
1044 [mcp794xx] = {
1045 .alarm = 1,
1046 /* this is battery backed SRAM */
1047 .nvram_offset = 0x20,
1048 .nvram_size = 0x40,
1049 .irq_handler = mcp794xx_irq,
1050 .rtc_ops = &mcp794xx_rtc_ops,
1051 },
1052};
1053
1054static const struct i2c_device_id ds1307_id[] = {
1055 { "ds1307", ds_1307 },
1056 { "ds1308", ds_1308 },
1057 { "ds1337", ds_1337 },
1058 { "ds1338", ds_1338 },
1059 { "ds1339", ds_1339 },
1060 { "ds1388", ds_1388 },
1061 { "ds1340", ds_1340 },
1062 { "ds1341", ds_1341 },
1063 { "ds3231", ds_3231 },
1064 { "m41t0", m41t0 },
1065 { "m41t00", m41t00 },
1066 { "m41t11", m41t11 },
1067 { "mcp7940x", mcp794xx },
1068 { "mcp7941x", mcp794xx },
1069 { "pt7c4338", ds_1307 },
1070 { "rx8025", rx_8025 },
1071 { "isl12057", ds_1337 },
1072 { "rx8130", rx_8130 },
1073 { }
1074};
1075MODULE_DEVICE_TABLE(i2c, ds1307_id);
1076
1077static const struct of_device_id ds1307_of_match[] = {
1078 {
1079 .compatible = "dallas,ds1307",
1080 .data = (void *)ds_1307
1081 },
1082 {
1083 .compatible = "dallas,ds1308",
1084 .data = (void *)ds_1308
1085 },
1086 {
1087 .compatible = "dallas,ds1337",
1088 .data = (void *)ds_1337
1089 },
1090 {
1091 .compatible = "dallas,ds1338",
1092 .data = (void *)ds_1338
1093 },
1094 {
1095 .compatible = "dallas,ds1339",
1096 .data = (void *)ds_1339
1097 },
1098 {
1099 .compatible = "dallas,ds1388",
1100 .data = (void *)ds_1388
1101 },
1102 {
1103 .compatible = "dallas,ds1340",
1104 .data = (void *)ds_1340
1105 },
1106 {
1107 .compatible = "dallas,ds1341",
1108 .data = (void *)ds_1341
1109 },
1110 {
1111 .compatible = "maxim,ds3231",
1112 .data = (void *)ds_3231
1113 },
1114 {
1115 .compatible = "st,m41t0",
1116 .data = (void *)m41t0
1117 },
1118 {
1119 .compatible = "st,m41t00",
1120 .data = (void *)m41t00
1121 },
1122 {
1123 .compatible = "st,m41t11",
1124 .data = (void *)m41t11
1125 },
1126 {
1127 .compatible = "microchip,mcp7940x",
1128 .data = (void *)mcp794xx
1129 },
1130 {
1131 .compatible = "microchip,mcp7941x",
1132 .data = (void *)mcp794xx
1133 },
1134 {
1135 .compatible = "pericom,pt7c4338",
1136 .data = (void *)ds_1307
1137 },
1138 {
1139 .compatible = "epson,rx8025",
1140 .data = (void *)rx_8025
1141 },
1142 {
1143 .compatible = "isil,isl12057",
1144 .data = (void *)ds_1337
1145 },
1146 {
1147 .compatible = "epson,rx8130",
1148 .data = (void *)rx_8130
1149 },
1150 { }
1151};
1152MODULE_DEVICE_TABLE(of, ds1307_of_match);
1153
1154/*
1155 * The ds1337 and ds1339 both have two alarms, but we only use the first
1156 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
1157 * signal; ds1339 chips have only one alarm signal.
1158 */
1159static irqreturn_t ds1307_irq(int irq, void *dev_id)
1160{
1161 struct ds1307 *ds1307 = dev_id;
1162 struct mutex *lock = &ds1307->rtc->ops_lock;
1163 int stat, ret;
1164
1165 mutex_lock(lock);
1166 ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &stat);
1167 if (ret)
1168 goto out;
1169
1170 if (stat & DS1337_BIT_A1I) {
1171 stat &= ~DS1337_BIT_A1I;
1172 regmap_write(ds1307->regmap, DS1337_REG_STATUS, stat);
1173
1174 ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
1175 DS1337_BIT_A1IE, 0);
1176 if (ret)
1177 goto out;
1178
1179 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
1180 }
1181
1182out:
1183 mutex_unlock(lock);
1184
1185 return IRQ_HANDLED;
1186}
1187
1188/*----------------------------------------------------------------------*/
1189
1190static const struct rtc_class_ops ds13xx_rtc_ops = {
1191 .read_time = ds1307_get_time,
1192 .set_time = ds1307_set_time,
1193 .read_alarm = ds1337_read_alarm,
1194 .set_alarm = ds1337_set_alarm,
1195 .alarm_irq_enable = ds1307_alarm_irq_enable,
1196};
1197
1198static ssize_t frequency_test_store(struct device *dev,
1199 struct device_attribute *attr,
1200 const char *buf, size_t count)
1201{
1202 struct ds1307 *ds1307 = dev_get_drvdata(dev->parent);
1203 bool freq_test_en;
1204 int ret;
1205
1206 ret = kstrtobool(buf, &freq_test_en);
1207 if (ret) {
1208 dev_err(dev, "Failed to store RTC Frequency Test attribute\n");
1209 return ret;
1210 }
1211
1212 regmap_update_bits(ds1307->regmap, M41TXX_REG_CONTROL, M41TXX_BIT_FT,
1213 freq_test_en ? M41TXX_BIT_FT : 0);
1214
1215 return count;
1216}
1217
1218static ssize_t frequency_test_show(struct device *dev,
1219 struct device_attribute *attr,
1220 char *buf)
1221{
1222 struct ds1307 *ds1307 = dev_get_drvdata(dev->parent);
1223 unsigned int ctrl_reg;
1224
1225 regmap_read(ds1307->regmap, M41TXX_REG_CONTROL, &ctrl_reg);
1226
1227 return sysfs_emit(buf, (ctrl_reg & M41TXX_BIT_FT) ? "on\n" : "off\n");
1228}
1229
1230static DEVICE_ATTR_RW(frequency_test);
1231
1232static struct attribute *rtc_freq_test_attrs[] = {
1233 &dev_attr_frequency_test.attr,
1234 NULL,
1235};
1236
1237static const struct attribute_group rtc_freq_test_attr_group = {
1238 .attrs = rtc_freq_test_attrs,
1239};
1240
1241static int ds1307_add_frequency_test(struct ds1307 *ds1307)
1242{
1243 int err;
1244
1245 switch (ds1307->type) {
1246 case m41t0:
1247 case m41t00:
1248 case m41t11:
1249 err = rtc_add_group(ds1307->rtc, &rtc_freq_test_attr_group);
1250 if (err)
1251 return err;
1252 break;
1253 default:
1254 break;
1255 }
1256
1257 return 0;
1258}
1259
1260/*----------------------------------------------------------------------*/
1261
1262static int ds1307_nvram_read(void *priv, unsigned int offset, void *val,
1263 size_t bytes)
1264{
1265 struct ds1307 *ds1307 = priv;
1266 const struct chip_desc *chip = &chips[ds1307->type];
1267
1268 return regmap_bulk_read(ds1307->regmap, chip->nvram_offset + offset,
1269 val, bytes);
1270}
1271
1272static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
1273 size_t bytes)
1274{
1275 struct ds1307 *ds1307 = priv;
1276 const struct chip_desc *chip = &chips[ds1307->type];
1277
1278 return regmap_bulk_write(ds1307->regmap, chip->nvram_offset + offset,
1279 val, bytes);
1280}
1281
1282/*----------------------------------------------------------------------*/
1283
1284static u8 ds1307_trickle_init(struct ds1307 *ds1307,
1285 const struct chip_desc *chip)
1286{
1287 u32 ohms, chargeable;
1288 bool diode = chip->charge_default;
1289
1290 if (!chip->do_trickle_setup)
1291 return 0;
1292
1293 if (device_property_read_u32(ds1307->dev, "trickle-resistor-ohms",
1294 &ohms) && chip->requires_trickle_resistor)
1295 return 0;
1296
1297 /* aux-voltage-chargeable takes precedence over the deprecated
1298 * trickle-diode-disable
1299 */
1300 if (!device_property_read_u32(ds1307->dev, "aux-voltage-chargeable",
1301 &chargeable)) {
1302 switch (chargeable) {
1303 case 0:
1304 diode = false;
1305 break;
1306 case 1:
1307 diode = true;
1308 break;
1309 default:
1310 dev_warn(ds1307->dev,
1311 "unsupported aux-voltage-chargeable value\n");
1312 break;
1313 }
1314 } else if (device_property_read_bool(ds1307->dev,
1315 "trickle-diode-disable")) {
1316 diode = false;
1317 }
1318
1319 return chip->do_trickle_setup(ds1307, ohms, diode);
1320}
1321
1322/*----------------------------------------------------------------------*/
1323
1324#if IS_REACHABLE(CONFIG_HWMON)
1325
1326/*
1327 * Temperature sensor support for ds3231 devices.
1328 */
1329
1330#define DS3231_REG_TEMPERATURE 0x11
1331
1332/*
1333 * A user-initiated temperature conversion is not started by this function,
1334 * so the temperature is updated once every 64 seconds.
1335 */
1336static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
1337{
1338 struct ds1307 *ds1307 = dev_get_drvdata(dev);
1339 u8 temp_buf[2];
1340 s16 temp;
1341 int ret;
1342
1343 ret = regmap_bulk_read(ds1307->regmap, DS3231_REG_TEMPERATURE,
1344 temp_buf, sizeof(temp_buf));
1345 if (ret)
1346 return ret;
1347 /*
1348 * Temperature is represented as a 10-bit code with a resolution of
1349 * 0.25 degree celsius and encoded in two's complement format.
1350 */
1351 temp = (temp_buf[0] << 8) | temp_buf[1];
1352 temp >>= 6;
1353 *mC = temp * 250;
1354
1355 return 0;
1356}
1357
1358static ssize_t ds3231_hwmon_show_temp(struct device *dev,
1359 struct device_attribute *attr, char *buf)
1360{
1361 int ret;
1362 s32 temp;
1363
1364 ret = ds3231_hwmon_read_temp(dev, &temp);
1365 if (ret)
1366 return ret;
1367
1368 return sprintf(buf, "%d\n", temp);
1369}
1370static SENSOR_DEVICE_ATTR(temp1_input, 0444, ds3231_hwmon_show_temp,
1371 NULL, 0);
1372
1373static struct attribute *ds3231_hwmon_attrs[] = {
1374 &sensor_dev_attr_temp1_input.dev_attr.attr,
1375 NULL,
1376};
1377ATTRIBUTE_GROUPS(ds3231_hwmon);
1378
1379static void ds1307_hwmon_register(struct ds1307 *ds1307)
1380{
1381 struct device *dev;
1382
1383 if (ds1307->type != ds_3231)
1384 return;
1385
1386 dev = devm_hwmon_device_register_with_groups(ds1307->dev, ds1307->name,
1387 ds1307,
1388 ds3231_hwmon_groups);
1389 if (IS_ERR(dev)) {
1390 dev_warn(ds1307->dev, "unable to register hwmon device %ld\n",
1391 PTR_ERR(dev));
1392 }
1393}
1394
1395#else
1396
1397static void ds1307_hwmon_register(struct ds1307 *ds1307)
1398{
1399}
1400
1401#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
1402
1403/*----------------------------------------------------------------------*/
1404
1405/*
1406 * Square-wave output support for DS3231
1407 * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
1408 */
1409#ifdef CONFIG_COMMON_CLK
1410
1411enum {
1412 DS3231_CLK_SQW = 0,
1413 DS3231_CLK_32KHZ,
1414};
1415
1416#define clk_sqw_to_ds1307(clk) \
1417 container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
1418#define clk_32khz_to_ds1307(clk) \
1419 container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
1420
1421static int ds3231_clk_sqw_rates[] = {
1422 1,
1423 1024,
1424 4096,
1425 8192,
1426};
1427
1428static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
1429{
1430 struct mutex *lock = &ds1307->rtc->ops_lock;
1431 int ret;
1432
1433 mutex_lock(lock);
1434 ret = regmap_update_bits(ds1307->regmap, DS1337_REG_CONTROL,
1435 mask, value);
1436 mutex_unlock(lock);
1437
1438 return ret;
1439}
1440
1441static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
1442 unsigned long parent_rate)
1443{
1444 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1445 int control, ret;
1446 int rate_sel = 0;
1447
1448 ret = regmap_read(ds1307->regmap, DS1337_REG_CONTROL, &control);
1449 if (ret)
1450 return ret;
1451 if (control & DS1337_BIT_RS1)
1452 rate_sel += 1;
1453 if (control & DS1337_BIT_RS2)
1454 rate_sel += 2;
1455
1456 return ds3231_clk_sqw_rates[rate_sel];
1457}
1458
1459static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
1460 unsigned long *prate)
1461{
1462 int i;
1463
1464 for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
1465 if (ds3231_clk_sqw_rates[i] <= rate)
1466 return ds3231_clk_sqw_rates[i];
1467 }
1468
1469 return 0;
1470}
1471
1472static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
1473 unsigned long parent_rate)
1474{
1475 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1476 int control = 0;
1477 int rate_sel;
1478
1479 for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
1480 rate_sel++) {
1481 if (ds3231_clk_sqw_rates[rate_sel] == rate)
1482 break;
1483 }
1484
1485 if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
1486 return -EINVAL;
1487
1488 if (rate_sel & 1)
1489 control |= DS1337_BIT_RS1;
1490 if (rate_sel & 2)
1491 control |= DS1337_BIT_RS2;
1492
1493 return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
1494 control);
1495}
1496
1497static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
1498{
1499 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1500
1501 return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
1502}
1503
1504static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
1505{
1506 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1507
1508 ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
1509}
1510
1511static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
1512{
1513 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1514 int control, ret;
1515
1516 ret = regmap_read(ds1307->regmap, DS1337_REG_CONTROL, &control);
1517 if (ret)
1518 return ret;
1519
1520 return !(control & DS1337_BIT_INTCN);
1521}
1522
1523static const struct clk_ops ds3231_clk_sqw_ops = {
1524 .prepare = ds3231_clk_sqw_prepare,
1525 .unprepare = ds3231_clk_sqw_unprepare,
1526 .is_prepared = ds3231_clk_sqw_is_prepared,
1527 .recalc_rate = ds3231_clk_sqw_recalc_rate,
1528 .round_rate = ds3231_clk_sqw_round_rate,
1529 .set_rate = ds3231_clk_sqw_set_rate,
1530};
1531
1532static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
1533 unsigned long parent_rate)
1534{
1535 return 32768;
1536}
1537
1538static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
1539{
1540 struct mutex *lock = &ds1307->rtc->ops_lock;
1541 int ret;
1542
1543 mutex_lock(lock);
1544 ret = regmap_update_bits(ds1307->regmap, DS1337_REG_STATUS,
1545 DS3231_BIT_EN32KHZ,
1546 enable ? DS3231_BIT_EN32KHZ : 0);
1547 mutex_unlock(lock);
1548
1549 return ret;
1550}
1551
1552static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
1553{
1554 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1555
1556 return ds3231_clk_32khz_control(ds1307, true);
1557}
1558
1559static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
1560{
1561 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1562
1563 ds3231_clk_32khz_control(ds1307, false);
1564}
1565
1566static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
1567{
1568 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1569 int status, ret;
1570
1571 ret = regmap_read(ds1307->regmap, DS1337_REG_STATUS, &status);
1572 if (ret)
1573 return ret;
1574
1575 return !!(status & DS3231_BIT_EN32KHZ);
1576}
1577
1578static const struct clk_ops ds3231_clk_32khz_ops = {
1579 .prepare = ds3231_clk_32khz_prepare,
1580 .unprepare = ds3231_clk_32khz_unprepare,
1581 .is_prepared = ds3231_clk_32khz_is_prepared,
1582 .recalc_rate = ds3231_clk_32khz_recalc_rate,
1583};
1584
1585static const char *ds3231_clks_names[] = {
1586 [DS3231_CLK_SQW] = "ds3231_clk_sqw",
1587 [DS3231_CLK_32KHZ] = "ds3231_clk_32khz",
1588};
1589
1590static struct clk_init_data ds3231_clks_init[] = {
1591 [DS3231_CLK_SQW] = {
1592 .ops = &ds3231_clk_sqw_ops,
1593 },
1594 [DS3231_CLK_32KHZ] = {
1595 .ops = &ds3231_clk_32khz_ops,
1596 },
1597};
1598
1599static int ds3231_clks_register(struct ds1307 *ds1307)
1600{
1601 struct device_node *node = ds1307->dev->of_node;
1602 struct clk_onecell_data *onecell;
1603 int i;
1604
1605 onecell = devm_kzalloc(ds1307->dev, sizeof(*onecell), GFP_KERNEL);
1606 if (!onecell)
1607 return -ENOMEM;
1608
1609 onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
1610 onecell->clks = devm_kcalloc(ds1307->dev, onecell->clk_num,
1611 sizeof(onecell->clks[0]), GFP_KERNEL);
1612 if (!onecell->clks)
1613 return -ENOMEM;
1614
1615 /* optional override of the clockname */
1616 device_property_read_string_array(ds1307->dev, "clock-output-names",
1617 ds3231_clks_names,
1618 ARRAY_SIZE(ds3231_clks_names));
1619
1620 for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
1621 struct clk_init_data init = ds3231_clks_init[i];
1622
1623 /*
1624 * Interrupt signal due to alarm conditions and square-wave
1625 * output share same pin, so don't initialize both.
1626 */
1627 if (i == DS3231_CLK_SQW && test_bit(RTC_FEATURE_ALARM, ds1307->rtc->features))
1628 continue;
1629
1630 init.name = ds3231_clks_names[i];
1631 ds1307->clks[i].init = &init;
1632
1633 onecell->clks[i] = devm_clk_register(ds1307->dev,
1634 &ds1307->clks[i]);
1635 if (IS_ERR(onecell->clks[i]))
1636 return PTR_ERR(onecell->clks[i]);
1637 }
1638
1639 if (node)
1640 of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
1641
1642 return 0;
1643}
1644
1645static void ds1307_clks_register(struct ds1307 *ds1307)
1646{
1647 int ret;
1648
1649 if (ds1307->type != ds_3231)
1650 return;
1651
1652 ret = ds3231_clks_register(ds1307);
1653 if (ret) {
1654 dev_warn(ds1307->dev, "unable to register clock device %d\n",
1655 ret);
1656 }
1657}
1658
1659#else
1660
1661static void ds1307_clks_register(struct ds1307 *ds1307)
1662{
1663}
1664
1665#endif /* CONFIG_COMMON_CLK */
1666
1667#ifdef CONFIG_WATCHDOG_CORE
1668static const struct watchdog_info ds1388_wdt_info = {
1669 .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
1670 .identity = "DS1388 watchdog",
1671};
1672
1673static const struct watchdog_ops ds1388_wdt_ops = {
1674 .owner = THIS_MODULE,
1675 .start = ds1388_wdt_start,
1676 .stop = ds1388_wdt_stop,
1677 .ping = ds1388_wdt_ping,
1678 .set_timeout = ds1388_wdt_set_timeout,
1679
1680};
1681
1682static void ds1307_wdt_register(struct ds1307 *ds1307)
1683{
1684 struct watchdog_device *wdt;
1685 int err;
1686 int val;
1687
1688 if (ds1307->type != ds_1388)
1689 return;
1690
1691 wdt = devm_kzalloc(ds1307->dev, sizeof(*wdt), GFP_KERNEL);
1692 if (!wdt)
1693 return;
1694
1695 err = regmap_read(ds1307->regmap, DS1388_REG_FLAG, &val);
1696 if (!err && val & DS1388_BIT_WF)
1697 wdt->bootstatus = WDIOF_CARDRESET;
1698
1699 wdt->info = &ds1388_wdt_info;
1700 wdt->ops = &ds1388_wdt_ops;
1701 wdt->timeout = 99;
1702 wdt->max_timeout = 99;
1703 wdt->min_timeout = 1;
1704
1705 watchdog_init_timeout(wdt, 0, ds1307->dev);
1706 watchdog_set_drvdata(wdt, ds1307);
1707 devm_watchdog_register_device(ds1307->dev, wdt);
1708}
1709#else
1710static void ds1307_wdt_register(struct ds1307 *ds1307)
1711{
1712}
1713#endif /* CONFIG_WATCHDOG_CORE */
1714
1715static const struct regmap_config regmap_config = {
1716 .reg_bits = 8,
1717 .val_bits = 8,
1718};
1719
1720static int ds1307_probe(struct i2c_client *client)
1721{
1722 const struct i2c_device_id *id = i2c_client_get_device_id(client);
1723 struct ds1307 *ds1307;
1724 const void *match;
1725 int err = -ENODEV;
1726 int tmp;
1727 const struct chip_desc *chip;
1728 bool want_irq;
1729 bool ds1307_can_wakeup_device = false;
1730 unsigned char regs[8];
1731 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
1732 u8 trickle_charger_setup = 0;
1733
1734 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
1735 if (!ds1307)
1736 return -ENOMEM;
1737
1738 dev_set_drvdata(&client->dev, ds1307);
1739 ds1307->dev = &client->dev;
1740 ds1307->name = client->name;
1741
1742 ds1307->regmap = devm_regmap_init_i2c(client, ®map_config);
1743 if (IS_ERR(ds1307->regmap)) {
1744 dev_err(ds1307->dev, "regmap allocation failed\n");
1745 return PTR_ERR(ds1307->regmap);
1746 }
1747
1748 i2c_set_clientdata(client, ds1307);
1749
1750 match = device_get_match_data(&client->dev);
1751 if (match) {
1752 ds1307->type = (uintptr_t)match;
1753 chip = &chips[ds1307->type];
1754 } else if (id) {
1755 chip = &chips[id->driver_data];
1756 ds1307->type = id->driver_data;
1757 } else {
1758 return -ENODEV;
1759 }
1760
1761 want_irq = client->irq > 0 && chip->alarm;
1762
1763 if (!pdata)
1764 trickle_charger_setup = ds1307_trickle_init(ds1307, chip);
1765 else if (pdata->trickle_charger_setup)
1766 trickle_charger_setup = pdata->trickle_charger_setup;
1767
1768 if (trickle_charger_setup && chip->trickle_charger_reg) {
1769 dev_dbg(ds1307->dev,
1770 "writing trickle charger info 0x%x to 0x%x\n",
1771 trickle_charger_setup, chip->trickle_charger_reg);
1772 regmap_write(ds1307->regmap, chip->trickle_charger_reg,
1773 trickle_charger_setup);
1774 }
1775
1776/*
1777 * For devices with no IRQ directly connected to the SoC, the RTC chip
1778 * can be forced as a wakeup source by stating that explicitly in
1779 * the device's .dts file using the "wakeup-source" boolean property.
1780 * If the "wakeup-source" property is set, don't request an IRQ.
1781 * This will guarantee the 'wakealarm' sysfs entry is available on the device,
1782 * if supported by the RTC.
1783 */
1784 if (chip->alarm && device_property_read_bool(&client->dev, "wakeup-source"))
1785 ds1307_can_wakeup_device = true;
1786
1787 switch (ds1307->type) {
1788 case ds_1337:
1789 case ds_1339:
1790 case ds_1341:
1791 case ds_3231:
1792 /* get registers that the "rtc" read below won't read... */
1793 err = regmap_bulk_read(ds1307->regmap, DS1337_REG_CONTROL,
1794 regs, 2);
1795 if (err) {
1796 dev_dbg(ds1307->dev, "read error %d\n", err);
1797 goto exit;
1798 }
1799
1800 /* oscillator off? turn it on, so clock can tick. */
1801 if (regs[0] & DS1337_BIT_nEOSC)
1802 regs[0] &= ~DS1337_BIT_nEOSC;
1803
1804 /*
1805 * Using IRQ or defined as wakeup-source?
1806 * Disable the square wave and both alarms.
1807 * For some variants, be sure alarms can trigger when we're
1808 * running on Vbackup (BBSQI/BBSQW)
1809 */
1810 if (want_irq || ds1307_can_wakeup_device) {
1811 regs[0] |= DS1337_BIT_INTCN | chip->bbsqi_bit;
1812 regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
1813 }
1814
1815 regmap_write(ds1307->regmap, DS1337_REG_CONTROL,
1816 regs[0]);
1817
1818 /* oscillator fault? clear flag, and warn */
1819 if (regs[1] & DS1337_BIT_OSF) {
1820 regmap_write(ds1307->regmap, DS1337_REG_STATUS,
1821 regs[1] & ~DS1337_BIT_OSF);
1822 dev_warn(ds1307->dev, "SET TIME!\n");
1823 }
1824 break;
1825
1826 case rx_8025:
1827 err = regmap_bulk_read(ds1307->regmap,
1828 RX8025_REG_CTRL1 << 4 | 0x08, regs, 2);
1829 if (err) {
1830 dev_dbg(ds1307->dev, "read error %d\n", err);
1831 goto exit;
1832 }
1833
1834 /* oscillator off? turn it on, so clock can tick. */
1835 if (!(regs[1] & RX8025_BIT_XST)) {
1836 regs[1] |= RX8025_BIT_XST;
1837 regmap_write(ds1307->regmap,
1838 RX8025_REG_CTRL2 << 4 | 0x08,
1839 regs[1]);
1840 dev_warn(ds1307->dev,
1841 "oscillator stop detected - SET TIME!\n");
1842 }
1843
1844 if (regs[1] & RX8025_BIT_PON) {
1845 regs[1] &= ~RX8025_BIT_PON;
1846 regmap_write(ds1307->regmap,
1847 RX8025_REG_CTRL2 << 4 | 0x08,
1848 regs[1]);
1849 dev_warn(ds1307->dev, "power-on detected\n");
1850 }
1851
1852 if (regs[1] & RX8025_BIT_VDET) {
1853 regs[1] &= ~RX8025_BIT_VDET;
1854 regmap_write(ds1307->regmap,
1855 RX8025_REG_CTRL2 << 4 | 0x08,
1856 regs[1]);
1857 dev_warn(ds1307->dev, "voltage drop detected\n");
1858 }
1859
1860 /* make sure we are running in 24hour mode */
1861 if (!(regs[0] & RX8025_BIT_2412)) {
1862 u8 hour;
1863
1864 /* switch to 24 hour mode */
1865 regmap_write(ds1307->regmap,
1866 RX8025_REG_CTRL1 << 4 | 0x08,
1867 regs[0] | RX8025_BIT_2412);
1868
1869 err = regmap_bulk_read(ds1307->regmap,
1870 RX8025_REG_CTRL1 << 4 | 0x08,
1871 regs, 2);
1872 if (err) {
1873 dev_dbg(ds1307->dev, "read error %d\n", err);
1874 goto exit;
1875 }
1876
1877 /* correct hour */
1878 hour = bcd2bin(regs[DS1307_REG_HOUR]);
1879 if (hour == 12)
1880 hour = 0;
1881 if (regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1882 hour += 12;
1883
1884 regmap_write(ds1307->regmap,
1885 DS1307_REG_HOUR << 4 | 0x08, hour);
1886 }
1887 break;
1888 case ds_1388:
1889 err = regmap_read(ds1307->regmap, DS1388_REG_CONTROL, &tmp);
1890 if (err) {
1891 dev_dbg(ds1307->dev, "read error %d\n", err);
1892 goto exit;
1893 }
1894
1895 /* oscillator off? turn it on, so clock can tick. */
1896 if (tmp & DS1388_BIT_nEOSC) {
1897 tmp &= ~DS1388_BIT_nEOSC;
1898 regmap_write(ds1307->regmap, DS1388_REG_CONTROL, tmp);
1899 }
1900 break;
1901 default:
1902 break;
1903 }
1904
1905 /* read RTC registers */
1906 err = regmap_bulk_read(ds1307->regmap, chip->offset, regs,
1907 sizeof(regs));
1908 if (err) {
1909 dev_dbg(ds1307->dev, "read error %d\n", err);
1910 goto exit;
1911 }
1912
1913 if (ds1307->type == mcp794xx &&
1914 !(regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
1915 regmap_write(ds1307->regmap, DS1307_REG_WDAY,
1916 regs[DS1307_REG_WDAY] |
1917 MCP794XX_BIT_VBATEN);
1918 }
1919
1920 tmp = regs[DS1307_REG_HOUR];
1921 switch (ds1307->type) {
1922 case ds_1340:
1923 case m41t0:
1924 case m41t00:
1925 case m41t11:
1926 /*
1927 * NOTE: ignores century bits; fix before deploying
1928 * systems that will run through year 2100.
1929 */
1930 break;
1931 case rx_8025:
1932 break;
1933 default:
1934 if (!(tmp & DS1307_BIT_12HR))
1935 break;
1936
1937 /*
1938 * Be sure we're in 24 hour mode. Multi-master systems
1939 * take note...
1940 */
1941 tmp = bcd2bin(tmp & 0x1f);
1942 if (tmp == 12)
1943 tmp = 0;
1944 if (regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1945 tmp += 12;
1946 regmap_write(ds1307->regmap, chip->offset + DS1307_REG_HOUR,
1947 bin2bcd(tmp));
1948 }
1949
1950 ds1307->rtc = devm_rtc_allocate_device(ds1307->dev);
1951 if (IS_ERR(ds1307->rtc))
1952 return PTR_ERR(ds1307->rtc);
1953
1954 if (want_irq || ds1307_can_wakeup_device)
1955 device_set_wakeup_capable(ds1307->dev, true);
1956 else
1957 clear_bit(RTC_FEATURE_ALARM, ds1307->rtc->features);
1958
1959 if (ds1307_can_wakeup_device && !want_irq) {
1960 dev_info(ds1307->dev,
1961 "'wakeup-source' is set, request for an IRQ is disabled!\n");
1962 /* We cannot support UIE mode if we do not have an IRQ line */
1963 clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, ds1307->rtc->features);
1964 }
1965
1966 if (want_irq) {
1967 err = devm_request_threaded_irq(ds1307->dev, client->irq, NULL,
1968 chip->irq_handler ?: ds1307_irq,
1969 IRQF_SHARED | IRQF_ONESHOT,
1970 ds1307->name, ds1307);
1971 if (err) {
1972 client->irq = 0;
1973 device_set_wakeup_capable(ds1307->dev, false);
1974 clear_bit(RTC_FEATURE_ALARM, ds1307->rtc->features);
1975 dev_err(ds1307->dev, "unable to request IRQ!\n");
1976 } else {
1977 dev_dbg(ds1307->dev, "got IRQ %d\n", client->irq);
1978 }
1979 }
1980
1981 ds1307->rtc->ops = chip->rtc_ops ?: &ds13xx_rtc_ops;
1982 err = ds1307_add_frequency_test(ds1307);
1983 if (err)
1984 return err;
1985
1986 err = devm_rtc_register_device(ds1307->rtc);
1987 if (err)
1988 return err;
1989
1990 if (chip->nvram_size) {
1991 struct nvmem_config nvmem_cfg = {
1992 .name = "ds1307_nvram",
1993 .word_size = 1,
1994 .stride = 1,
1995 .size = chip->nvram_size,
1996 .reg_read = ds1307_nvram_read,
1997 .reg_write = ds1307_nvram_write,
1998 .priv = ds1307,
1999 };
2000
2001 devm_rtc_nvmem_register(ds1307->rtc, &nvmem_cfg);
2002 }
2003
2004 ds1307_hwmon_register(ds1307);
2005 ds1307_clks_register(ds1307);
2006 ds1307_wdt_register(ds1307);
2007
2008 return 0;
2009
2010exit:
2011 return err;
2012}
2013
2014static struct i2c_driver ds1307_driver = {
2015 .driver = {
2016 .name = "rtc-ds1307",
2017 .of_match_table = ds1307_of_match,
2018 },
2019 .probe = ds1307_probe,
2020 .id_table = ds1307_id,
2021};
2022
2023module_i2c_driver(ds1307_driver);
2024
2025MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
2026MODULE_LICENSE("GPL");
1/*
2 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
3 *
4 * Copyright (C) 2005 James Chapman (ds1337 core)
5 * Copyright (C) 2006 David Brownell
6 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
7 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#include <linux/acpi.h>
15#include <linux/bcd.h>
16#include <linux/i2c.h>
17#include <linux/init.h>
18#include <linux/module.h>
19#include <linux/rtc/ds1307.h>
20#include <linux/rtc.h>
21#include <linux/slab.h>
22#include <linux/string.h>
23#include <linux/hwmon.h>
24#include <linux/hwmon-sysfs.h>
25#include <linux/clk-provider.h>
26
27/*
28 * We can't determine type by probing, but if we expect pre-Linux code
29 * to have set the chip up as a clock (turning on the oscillator and
30 * setting the date and time), Linux can ignore the non-clock features.
31 * That's a natural job for a factory or repair bench.
32 */
33enum ds_type {
34 ds_1307,
35 ds_1337,
36 ds_1338,
37 ds_1339,
38 ds_1340,
39 ds_1388,
40 ds_3231,
41 m41t00,
42 mcp794xx,
43 rx_8025,
44 last_ds_type /* always last */
45 /* rs5c372 too? different address... */
46};
47
48
49/* RTC registers don't differ much, except for the century flag */
50#define DS1307_REG_SECS 0x00 /* 00-59 */
51# define DS1307_BIT_CH 0x80
52# define DS1340_BIT_nEOSC 0x80
53# define MCP794XX_BIT_ST 0x80
54#define DS1307_REG_MIN 0x01 /* 00-59 */
55#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
56# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
57# define DS1307_BIT_PM 0x20 /* in REG_HOUR */
58# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
59# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
60#define DS1307_REG_WDAY 0x03 /* 01-07 */
61# define MCP794XX_BIT_VBATEN 0x08
62#define DS1307_REG_MDAY 0x04 /* 01-31 */
63#define DS1307_REG_MONTH 0x05 /* 01-12 */
64# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
65#define DS1307_REG_YEAR 0x06 /* 00-99 */
66
67/*
68 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
69 * start at 7, and they differ a LOT. Only control and status matter for
70 * basic RTC date and time functionality; be careful using them.
71 */
72#define DS1307_REG_CONTROL 0x07 /* or ds1338 */
73# define DS1307_BIT_OUT 0x80
74# define DS1338_BIT_OSF 0x20
75# define DS1307_BIT_SQWE 0x10
76# define DS1307_BIT_RS1 0x02
77# define DS1307_BIT_RS0 0x01
78#define DS1337_REG_CONTROL 0x0e
79# define DS1337_BIT_nEOSC 0x80
80# define DS1339_BIT_BBSQI 0x20
81# define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
82# define DS1337_BIT_RS2 0x10
83# define DS1337_BIT_RS1 0x08
84# define DS1337_BIT_INTCN 0x04
85# define DS1337_BIT_A2IE 0x02
86# define DS1337_BIT_A1IE 0x01
87#define DS1340_REG_CONTROL 0x07
88# define DS1340_BIT_OUT 0x80
89# define DS1340_BIT_FT 0x40
90# define DS1340_BIT_CALIB_SIGN 0x20
91# define DS1340_M_CALIBRATION 0x1f
92#define DS1340_REG_FLAG 0x09
93# define DS1340_BIT_OSF 0x80
94#define DS1337_REG_STATUS 0x0f
95# define DS1337_BIT_OSF 0x80
96# define DS3231_BIT_EN32KHZ 0x08
97# define DS1337_BIT_A2I 0x02
98# define DS1337_BIT_A1I 0x01
99#define DS1339_REG_ALARM1_SECS 0x07
100
101#define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
102
103#define RX8025_REG_CTRL1 0x0e
104# define RX8025_BIT_2412 0x20
105#define RX8025_REG_CTRL2 0x0f
106# define RX8025_BIT_PON 0x10
107# define RX8025_BIT_VDET 0x40
108# define RX8025_BIT_XST 0x20
109
110
111struct ds1307 {
112 u8 offset; /* register's offset */
113 u8 regs[11];
114 u16 nvram_offset;
115 struct bin_attribute *nvram;
116 enum ds_type type;
117 unsigned long flags;
118#define HAS_NVRAM 0 /* bit 0 == sysfs file active */
119#define HAS_ALARM 1 /* bit 1 == irq claimed */
120 struct i2c_client *client;
121 struct rtc_device *rtc;
122 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
123 u8 length, u8 *values);
124 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
125 u8 length, const u8 *values);
126#ifdef CONFIG_COMMON_CLK
127 struct clk_hw clks[2];
128#endif
129};
130
131struct chip_desc {
132 unsigned alarm:1;
133 u16 nvram_offset;
134 u16 nvram_size;
135 u16 trickle_charger_reg;
136 u8 trickle_charger_setup;
137 u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool);
138};
139
140static u8 do_trickle_setup_ds1339(struct i2c_client *,
141 uint32_t ohms, bool diode);
142
143static struct chip_desc chips[last_ds_type] = {
144 [ds_1307] = {
145 .nvram_offset = 8,
146 .nvram_size = 56,
147 },
148 [ds_1337] = {
149 .alarm = 1,
150 },
151 [ds_1338] = {
152 .nvram_offset = 8,
153 .nvram_size = 56,
154 },
155 [ds_1339] = {
156 .alarm = 1,
157 .trickle_charger_reg = 0x10,
158 .do_trickle_setup = &do_trickle_setup_ds1339,
159 },
160 [ds_1340] = {
161 .trickle_charger_reg = 0x08,
162 },
163 [ds_1388] = {
164 .trickle_charger_reg = 0x0a,
165 },
166 [ds_3231] = {
167 .alarm = 1,
168 },
169 [mcp794xx] = {
170 .alarm = 1,
171 /* this is battery backed SRAM */
172 .nvram_offset = 0x20,
173 .nvram_size = 0x40,
174 },
175};
176
177static const struct i2c_device_id ds1307_id[] = {
178 { "ds1307", ds_1307 },
179 { "ds1337", ds_1337 },
180 { "ds1338", ds_1338 },
181 { "ds1339", ds_1339 },
182 { "ds1388", ds_1388 },
183 { "ds1340", ds_1340 },
184 { "ds3231", ds_3231 },
185 { "m41t00", m41t00 },
186 { "mcp7940x", mcp794xx },
187 { "mcp7941x", mcp794xx },
188 { "pt7c4338", ds_1307 },
189 { "rx8025", rx_8025 },
190 { "isl12057", ds_1337 },
191 { }
192};
193MODULE_DEVICE_TABLE(i2c, ds1307_id);
194
195#ifdef CONFIG_ACPI
196static const struct acpi_device_id ds1307_acpi_ids[] = {
197 { .id = "DS1307", .driver_data = ds_1307 },
198 { .id = "DS1337", .driver_data = ds_1337 },
199 { .id = "DS1338", .driver_data = ds_1338 },
200 { .id = "DS1339", .driver_data = ds_1339 },
201 { .id = "DS1388", .driver_data = ds_1388 },
202 { .id = "DS1340", .driver_data = ds_1340 },
203 { .id = "DS3231", .driver_data = ds_3231 },
204 { .id = "M41T00", .driver_data = m41t00 },
205 { .id = "MCP7940X", .driver_data = mcp794xx },
206 { .id = "MCP7941X", .driver_data = mcp794xx },
207 { .id = "PT7C4338", .driver_data = ds_1307 },
208 { .id = "RX8025", .driver_data = rx_8025 },
209 { .id = "ISL12057", .driver_data = ds_1337 },
210 { }
211};
212MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
213#endif
214
215/*----------------------------------------------------------------------*/
216
217#define BLOCK_DATA_MAX_TRIES 10
218
219static s32 ds1307_read_block_data_once(const struct i2c_client *client,
220 u8 command, u8 length, u8 *values)
221{
222 s32 i, data;
223
224 for (i = 0; i < length; i++) {
225 data = i2c_smbus_read_byte_data(client, command + i);
226 if (data < 0)
227 return data;
228 values[i] = data;
229 }
230 return i;
231}
232
233static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
234 u8 length, u8 *values)
235{
236 u8 oldvalues[255];
237 s32 ret;
238 int tries = 0;
239
240 dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
241 ret = ds1307_read_block_data_once(client, command, length, values);
242 if (ret < 0)
243 return ret;
244 do {
245 if (++tries > BLOCK_DATA_MAX_TRIES) {
246 dev_err(&client->dev,
247 "ds1307_read_block_data failed\n");
248 return -EIO;
249 }
250 memcpy(oldvalues, values, length);
251 ret = ds1307_read_block_data_once(client, command, length,
252 values);
253 if (ret < 0)
254 return ret;
255 } while (memcmp(oldvalues, values, length));
256 return length;
257}
258
259static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
260 u8 length, const u8 *values)
261{
262 u8 currvalues[255];
263 int tries = 0;
264
265 dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
266 do {
267 s32 i, ret;
268
269 if (++tries > BLOCK_DATA_MAX_TRIES) {
270 dev_err(&client->dev,
271 "ds1307_write_block_data failed\n");
272 return -EIO;
273 }
274 for (i = 0; i < length; i++) {
275 ret = i2c_smbus_write_byte_data(client, command + i,
276 values[i]);
277 if (ret < 0)
278 return ret;
279 }
280 ret = ds1307_read_block_data_once(client, command, length,
281 currvalues);
282 if (ret < 0)
283 return ret;
284 } while (memcmp(currvalues, values, length));
285 return length;
286}
287
288/*----------------------------------------------------------------------*/
289
290/* These RTC devices are not designed to be connected to a SMbus adapter.
291 SMbus limits block operations length to 32 bytes, whereas it's not
292 limited on I2C buses. As a result, accesses may exceed 32 bytes;
293 in that case, split them into smaller blocks */
294
295static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client,
296 u8 command, u8 length, const u8 *values)
297{
298 u8 suboffset = 0;
299
300 if (length <= I2C_SMBUS_BLOCK_MAX) {
301 s32 retval = i2c_smbus_write_i2c_block_data(client,
302 command, length, values);
303 if (retval < 0)
304 return retval;
305 return length;
306 }
307
308 while (suboffset < length) {
309 s32 retval = i2c_smbus_write_i2c_block_data(client,
310 command + suboffset,
311 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
312 values + suboffset);
313 if (retval < 0)
314 return retval;
315
316 suboffset += I2C_SMBUS_BLOCK_MAX;
317 }
318 return length;
319}
320
321static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client,
322 u8 command, u8 length, u8 *values)
323{
324 u8 suboffset = 0;
325
326 if (length <= I2C_SMBUS_BLOCK_MAX)
327 return i2c_smbus_read_i2c_block_data(client,
328 command, length, values);
329
330 while (suboffset < length) {
331 s32 retval = i2c_smbus_read_i2c_block_data(client,
332 command + suboffset,
333 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
334 values + suboffset);
335 if (retval < 0)
336 return retval;
337
338 suboffset += I2C_SMBUS_BLOCK_MAX;
339 }
340 return length;
341}
342
343/*----------------------------------------------------------------------*/
344
345/*
346 * The ds1337 and ds1339 both have two alarms, but we only use the first
347 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
348 * signal; ds1339 chips have only one alarm signal.
349 */
350static irqreturn_t ds1307_irq(int irq, void *dev_id)
351{
352 struct i2c_client *client = dev_id;
353 struct ds1307 *ds1307 = i2c_get_clientdata(client);
354 struct mutex *lock = &ds1307->rtc->ops_lock;
355 int stat, control;
356
357 mutex_lock(lock);
358 stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
359 if (stat < 0)
360 goto out;
361
362 if (stat & DS1337_BIT_A1I) {
363 stat &= ~DS1337_BIT_A1I;
364 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
365
366 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
367 if (control < 0)
368 goto out;
369
370 control &= ~DS1337_BIT_A1IE;
371 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
372
373 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
374 }
375
376out:
377 mutex_unlock(lock);
378
379 return IRQ_HANDLED;
380}
381
382/*----------------------------------------------------------------------*/
383
384static int ds1307_get_time(struct device *dev, struct rtc_time *t)
385{
386 struct ds1307 *ds1307 = dev_get_drvdata(dev);
387 int tmp;
388
389 /* read the RTC date and time registers all at once */
390 tmp = ds1307->read_block_data(ds1307->client,
391 ds1307->offset, 7, ds1307->regs);
392 if (tmp != 7) {
393 dev_err(dev, "%s error %d\n", "read", tmp);
394 return -EIO;
395 }
396
397 dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
398
399 t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
400 t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
401 tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
402 t->tm_hour = bcd2bin(tmp);
403 t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
404 t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
405 tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
406 t->tm_mon = bcd2bin(tmp) - 1;
407 t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
408
409#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
410 switch (ds1307->type) {
411 case ds_1337:
412 case ds_1339:
413 case ds_3231:
414 if (ds1307->regs[DS1307_REG_MONTH] & DS1337_BIT_CENTURY)
415 t->tm_year += 100;
416 break;
417 case ds_1340:
418 if (ds1307->regs[DS1307_REG_HOUR] & DS1340_BIT_CENTURY)
419 t->tm_year += 100;
420 break;
421 default:
422 break;
423 }
424#endif
425
426 dev_dbg(dev, "%s secs=%d, mins=%d, "
427 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
428 "read", t->tm_sec, t->tm_min,
429 t->tm_hour, t->tm_mday,
430 t->tm_mon, t->tm_year, t->tm_wday);
431
432 /* initial clock setting can be undefined */
433 return rtc_valid_tm(t);
434}
435
436static int ds1307_set_time(struct device *dev, struct rtc_time *t)
437{
438 struct ds1307 *ds1307 = dev_get_drvdata(dev);
439 int result;
440 int tmp;
441 u8 *buf = ds1307->regs;
442
443 dev_dbg(dev, "%s secs=%d, mins=%d, "
444 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
445 "write", t->tm_sec, t->tm_min,
446 t->tm_hour, t->tm_mday,
447 t->tm_mon, t->tm_year, t->tm_wday);
448
449#ifdef CONFIG_RTC_DRV_DS1307_CENTURY
450 if (t->tm_year < 100)
451 return -EINVAL;
452
453 switch (ds1307->type) {
454 case ds_1337:
455 case ds_1339:
456 case ds_3231:
457 case ds_1340:
458 if (t->tm_year > 299)
459 return -EINVAL;
460 default:
461 if (t->tm_year > 199)
462 return -EINVAL;
463 break;
464 }
465#else
466 if (t->tm_year < 100 || t->tm_year > 199)
467 return -EINVAL;
468#endif
469
470 buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
471 buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
472 buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
473 buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
474 buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
475 buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
476
477 /* assume 20YY not 19YY */
478 tmp = t->tm_year - 100;
479 buf[DS1307_REG_YEAR] = bin2bcd(tmp);
480
481 switch (ds1307->type) {
482 case ds_1337:
483 case ds_1339:
484 case ds_3231:
485 if (t->tm_year > 199)
486 buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
487 break;
488 case ds_1340:
489 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN;
490 if (t->tm_year > 199)
491 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY;
492 break;
493 case mcp794xx:
494 /*
495 * these bits were cleared when preparing the date/time
496 * values and need to be set again before writing the
497 * buffer out to the device.
498 */
499 buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
500 buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
501 break;
502 default:
503 break;
504 }
505
506 dev_dbg(dev, "%s: %7ph\n", "write", buf);
507
508 result = ds1307->write_block_data(ds1307->client,
509 ds1307->offset, 7, buf);
510 if (result < 0) {
511 dev_err(dev, "%s error %d\n", "write", result);
512 return result;
513 }
514 return 0;
515}
516
517static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
518{
519 struct i2c_client *client = to_i2c_client(dev);
520 struct ds1307 *ds1307 = i2c_get_clientdata(client);
521 int ret;
522
523 if (!test_bit(HAS_ALARM, &ds1307->flags))
524 return -EINVAL;
525
526 /* read all ALARM1, ALARM2, and status registers at once */
527 ret = ds1307->read_block_data(client,
528 DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
529 if (ret != 9) {
530 dev_err(dev, "%s error %d\n", "alarm read", ret);
531 return -EIO;
532 }
533
534 dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
535 &ds1307->regs[0], &ds1307->regs[4], &ds1307->regs[7]);
536
537 /*
538 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
539 * and that all four fields are checked matches
540 */
541 t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
542 t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
543 t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
544 t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
545
546 /* ... and status */
547 t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
548 t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);
549
550 dev_dbg(dev, "%s secs=%d, mins=%d, "
551 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
552 "alarm read", t->time.tm_sec, t->time.tm_min,
553 t->time.tm_hour, t->time.tm_mday,
554 t->enabled, t->pending);
555
556 return 0;
557}
558
559static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
560{
561 struct i2c_client *client = to_i2c_client(dev);
562 struct ds1307 *ds1307 = i2c_get_clientdata(client);
563 unsigned char *buf = ds1307->regs;
564 u8 control, status;
565 int ret;
566
567 if (!test_bit(HAS_ALARM, &ds1307->flags))
568 return -EINVAL;
569
570 dev_dbg(dev, "%s secs=%d, mins=%d, "
571 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
572 "alarm set", t->time.tm_sec, t->time.tm_min,
573 t->time.tm_hour, t->time.tm_mday,
574 t->enabled, t->pending);
575
576 /* read current status of both alarms and the chip */
577 ret = ds1307->read_block_data(client,
578 DS1339_REG_ALARM1_SECS, 9, buf);
579 if (ret != 9) {
580 dev_err(dev, "%s error %d\n", "alarm write", ret);
581 return -EIO;
582 }
583 control = ds1307->regs[7];
584 status = ds1307->regs[8];
585
586 dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
587 &ds1307->regs[0], &ds1307->regs[4], control, status);
588
589 /* set ALARM1, using 24 hour and day-of-month modes */
590 buf[0] = bin2bcd(t->time.tm_sec);
591 buf[1] = bin2bcd(t->time.tm_min);
592 buf[2] = bin2bcd(t->time.tm_hour);
593 buf[3] = bin2bcd(t->time.tm_mday);
594
595 /* set ALARM2 to non-garbage */
596 buf[4] = 0;
597 buf[5] = 0;
598 buf[6] = 0;
599
600 /* disable alarms */
601 buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
602 buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
603
604 ret = ds1307->write_block_data(client,
605 DS1339_REG_ALARM1_SECS, 9, buf);
606 if (ret < 0) {
607 dev_err(dev, "can't set alarm time\n");
608 return ret;
609 }
610
611 /* optionally enable ALARM1 */
612 if (t->enabled) {
613 dev_dbg(dev, "alarm IRQ armed\n");
614 buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
615 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, buf[7]);
616 }
617
618 return 0;
619}
620
621static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
622{
623 struct i2c_client *client = to_i2c_client(dev);
624 struct ds1307 *ds1307 = i2c_get_clientdata(client);
625 int ret;
626
627 if (!test_bit(HAS_ALARM, &ds1307->flags))
628 return -ENOTTY;
629
630 ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
631 if (ret < 0)
632 return ret;
633
634 if (enabled)
635 ret |= DS1337_BIT_A1IE;
636 else
637 ret &= ~DS1337_BIT_A1IE;
638
639 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
640 if (ret < 0)
641 return ret;
642
643 return 0;
644}
645
646static const struct rtc_class_ops ds13xx_rtc_ops = {
647 .read_time = ds1307_get_time,
648 .set_time = ds1307_set_time,
649 .read_alarm = ds1337_read_alarm,
650 .set_alarm = ds1337_set_alarm,
651 .alarm_irq_enable = ds1307_alarm_irq_enable,
652};
653
654/*----------------------------------------------------------------------*/
655
656/*
657 * Alarm support for mcp794xx devices.
658 */
659
660#define MCP794XX_REG_WEEKDAY 0x3
661#define MCP794XX_REG_WEEKDAY_WDAY_MASK 0x7
662#define MCP794XX_REG_CONTROL 0x07
663# define MCP794XX_BIT_ALM0_EN 0x10
664# define MCP794XX_BIT_ALM1_EN 0x20
665#define MCP794XX_REG_ALARM0_BASE 0x0a
666#define MCP794XX_REG_ALARM0_CTRL 0x0d
667#define MCP794XX_REG_ALARM1_BASE 0x11
668#define MCP794XX_REG_ALARM1_CTRL 0x14
669# define MCP794XX_BIT_ALMX_IF (1 << 3)
670# define MCP794XX_BIT_ALMX_C0 (1 << 4)
671# define MCP794XX_BIT_ALMX_C1 (1 << 5)
672# define MCP794XX_BIT_ALMX_C2 (1 << 6)
673# define MCP794XX_BIT_ALMX_POL (1 << 7)
674# define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
675 MCP794XX_BIT_ALMX_C1 | \
676 MCP794XX_BIT_ALMX_C2)
677
678static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
679{
680 struct i2c_client *client = dev_id;
681 struct ds1307 *ds1307 = i2c_get_clientdata(client);
682 struct mutex *lock = &ds1307->rtc->ops_lock;
683 int reg, ret;
684
685 mutex_lock(lock);
686
687 /* Check and clear alarm 0 interrupt flag. */
688 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL);
689 if (reg < 0)
690 goto out;
691 if (!(reg & MCP794XX_BIT_ALMX_IF))
692 goto out;
693 reg &= ~MCP794XX_BIT_ALMX_IF;
694 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg);
695 if (ret < 0)
696 goto out;
697
698 /* Disable alarm 0. */
699 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
700 if (reg < 0)
701 goto out;
702 reg &= ~MCP794XX_BIT_ALM0_EN;
703 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
704 if (ret < 0)
705 goto out;
706
707 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
708
709out:
710 mutex_unlock(lock);
711
712 return IRQ_HANDLED;
713}
714
715static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
716{
717 struct i2c_client *client = to_i2c_client(dev);
718 struct ds1307 *ds1307 = i2c_get_clientdata(client);
719 u8 *regs = ds1307->regs;
720 int ret;
721
722 if (!test_bit(HAS_ALARM, &ds1307->flags))
723 return -EINVAL;
724
725 /* Read control and alarm 0 registers. */
726 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
727 if (ret < 0)
728 return ret;
729
730 t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
731
732 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
733 t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f);
734 t->time.tm_min = bcd2bin(ds1307->regs[4] & 0x7f);
735 t->time.tm_hour = bcd2bin(ds1307->regs[5] & 0x3f);
736 t->time.tm_wday = bcd2bin(ds1307->regs[6] & 0x7) - 1;
737 t->time.tm_mday = bcd2bin(ds1307->regs[7] & 0x3f);
738 t->time.tm_mon = bcd2bin(ds1307->regs[8] & 0x1f) - 1;
739 t->time.tm_year = -1;
740 t->time.tm_yday = -1;
741 t->time.tm_isdst = -1;
742
743 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
744 "enabled=%d polarity=%d irq=%d match=%d\n", __func__,
745 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
746 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
747 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL),
748 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF),
749 (ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
750
751 return 0;
752}
753
754static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
755{
756 struct i2c_client *client = to_i2c_client(dev);
757 struct ds1307 *ds1307 = i2c_get_clientdata(client);
758 unsigned char *regs = ds1307->regs;
759 int ret;
760
761 if (!test_bit(HAS_ALARM, &ds1307->flags))
762 return -EINVAL;
763
764 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
765 "enabled=%d pending=%d\n", __func__,
766 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
767 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
768 t->enabled, t->pending);
769
770 /* Read control and alarm 0 registers. */
771 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
772 if (ret < 0)
773 return ret;
774
775 /* Set alarm 0, using 24-hour and day-of-month modes. */
776 regs[3] = bin2bcd(t->time.tm_sec);
777 regs[4] = bin2bcd(t->time.tm_min);
778 regs[5] = bin2bcd(t->time.tm_hour);
779 regs[6] = bin2bcd(t->time.tm_wday + 1);
780 regs[7] = bin2bcd(t->time.tm_mday);
781 regs[8] = bin2bcd(t->time.tm_mon + 1);
782
783 /* Clear the alarm 0 interrupt flag. */
784 regs[6] &= ~MCP794XX_BIT_ALMX_IF;
785 /* Set alarm match: second, minute, hour, day, date, month. */
786 regs[6] |= MCP794XX_MSK_ALMX_MATCH;
787 /* Disable interrupt. We will not enable until completely programmed */
788 regs[0] &= ~MCP794XX_BIT_ALM0_EN;
789
790 ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
791 if (ret < 0)
792 return ret;
793
794 if (!t->enabled)
795 return 0;
796 regs[0] |= MCP794XX_BIT_ALM0_EN;
797 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, regs[0]);
798}
799
800static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
801{
802 struct i2c_client *client = to_i2c_client(dev);
803 struct ds1307 *ds1307 = i2c_get_clientdata(client);
804 int reg;
805
806 if (!test_bit(HAS_ALARM, &ds1307->flags))
807 return -EINVAL;
808
809 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
810 if (reg < 0)
811 return reg;
812
813 if (enabled)
814 reg |= MCP794XX_BIT_ALM0_EN;
815 else
816 reg &= ~MCP794XX_BIT_ALM0_EN;
817
818 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
819}
820
821static const struct rtc_class_ops mcp794xx_rtc_ops = {
822 .read_time = ds1307_get_time,
823 .set_time = ds1307_set_time,
824 .read_alarm = mcp794xx_read_alarm,
825 .set_alarm = mcp794xx_set_alarm,
826 .alarm_irq_enable = mcp794xx_alarm_irq_enable,
827};
828
829/*----------------------------------------------------------------------*/
830
831static ssize_t
832ds1307_nvram_read(struct file *filp, struct kobject *kobj,
833 struct bin_attribute *attr,
834 char *buf, loff_t off, size_t count)
835{
836 struct i2c_client *client;
837 struct ds1307 *ds1307;
838 int result;
839
840 client = kobj_to_i2c_client(kobj);
841 ds1307 = i2c_get_clientdata(client);
842
843 result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
844 count, buf);
845 if (result < 0)
846 dev_err(&client->dev, "%s error %d\n", "nvram read", result);
847 return result;
848}
849
850static ssize_t
851ds1307_nvram_write(struct file *filp, struct kobject *kobj,
852 struct bin_attribute *attr,
853 char *buf, loff_t off, size_t count)
854{
855 struct i2c_client *client;
856 struct ds1307 *ds1307;
857 int result;
858
859 client = kobj_to_i2c_client(kobj);
860 ds1307 = i2c_get_clientdata(client);
861
862 result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
863 count, buf);
864 if (result < 0) {
865 dev_err(&client->dev, "%s error %d\n", "nvram write", result);
866 return result;
867 }
868 return count;
869}
870
871
872/*----------------------------------------------------------------------*/
873
874static u8 do_trickle_setup_ds1339(struct i2c_client *client,
875 uint32_t ohms, bool diode)
876{
877 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
878 DS1307_TRICKLE_CHARGER_NO_DIODE;
879
880 switch (ohms) {
881 case 250:
882 setup |= DS1307_TRICKLE_CHARGER_250_OHM;
883 break;
884 case 2000:
885 setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
886 break;
887 case 4000:
888 setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
889 break;
890 default:
891 dev_warn(&client->dev,
892 "Unsupported ohm value %u in dt\n", ohms);
893 return 0;
894 }
895 return setup;
896}
897
898static void ds1307_trickle_init(struct i2c_client *client,
899 struct chip_desc *chip)
900{
901 uint32_t ohms = 0;
902 bool diode = true;
903
904 if (!chip->do_trickle_setup)
905 goto out;
906 if (device_property_read_u32(&client->dev, "trickle-resistor-ohms", &ohms))
907 goto out;
908 if (device_property_read_bool(&client->dev, "trickle-diode-disable"))
909 diode = false;
910 chip->trickle_charger_setup = chip->do_trickle_setup(client,
911 ohms, diode);
912out:
913 return;
914}
915
916/*----------------------------------------------------------------------*/
917
918#ifdef CONFIG_RTC_DRV_DS1307_HWMON
919
920/*
921 * Temperature sensor support for ds3231 devices.
922 */
923
924#define DS3231_REG_TEMPERATURE 0x11
925
926/*
927 * A user-initiated temperature conversion is not started by this function,
928 * so the temperature is updated once every 64 seconds.
929 */
930static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
931{
932 struct ds1307 *ds1307 = dev_get_drvdata(dev);
933 u8 temp_buf[2];
934 s16 temp;
935 int ret;
936
937 ret = ds1307->read_block_data(ds1307->client, DS3231_REG_TEMPERATURE,
938 sizeof(temp_buf), temp_buf);
939 if (ret < 0)
940 return ret;
941 if (ret != sizeof(temp_buf))
942 return -EIO;
943
944 /*
945 * Temperature is represented as a 10-bit code with a resolution of
946 * 0.25 degree celsius and encoded in two's complement format.
947 */
948 temp = (temp_buf[0] << 8) | temp_buf[1];
949 temp >>= 6;
950 *mC = temp * 250;
951
952 return 0;
953}
954
955static ssize_t ds3231_hwmon_show_temp(struct device *dev,
956 struct device_attribute *attr, char *buf)
957{
958 int ret;
959 s32 temp;
960
961 ret = ds3231_hwmon_read_temp(dev, &temp);
962 if (ret)
963 return ret;
964
965 return sprintf(buf, "%d\n", temp);
966}
967static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ds3231_hwmon_show_temp,
968 NULL, 0);
969
970static struct attribute *ds3231_hwmon_attrs[] = {
971 &sensor_dev_attr_temp1_input.dev_attr.attr,
972 NULL,
973};
974ATTRIBUTE_GROUPS(ds3231_hwmon);
975
976static void ds1307_hwmon_register(struct ds1307 *ds1307)
977{
978 struct device *dev;
979
980 if (ds1307->type != ds_3231)
981 return;
982
983 dev = devm_hwmon_device_register_with_groups(&ds1307->client->dev,
984 ds1307->client->name,
985 ds1307, ds3231_hwmon_groups);
986 if (IS_ERR(dev)) {
987 dev_warn(&ds1307->client->dev,
988 "unable to register hwmon device %ld\n", PTR_ERR(dev));
989 }
990}
991
992#else
993
994static void ds1307_hwmon_register(struct ds1307 *ds1307)
995{
996}
997
998#endif /* CONFIG_RTC_DRV_DS1307_HWMON */
999
1000/*----------------------------------------------------------------------*/
1001
1002/*
1003 * Square-wave output support for DS3231
1004 * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
1005 */
1006#ifdef CONFIG_COMMON_CLK
1007
1008enum {
1009 DS3231_CLK_SQW = 0,
1010 DS3231_CLK_32KHZ,
1011};
1012
1013#define clk_sqw_to_ds1307(clk) \
1014 container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
1015#define clk_32khz_to_ds1307(clk) \
1016 container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
1017
1018static int ds3231_clk_sqw_rates[] = {
1019 1,
1020 1024,
1021 4096,
1022 8192,
1023};
1024
1025static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
1026{
1027 struct i2c_client *client = ds1307->client;
1028 struct mutex *lock = &ds1307->rtc->ops_lock;
1029 int control;
1030 int ret;
1031
1032 mutex_lock(lock);
1033
1034 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
1035 if (control < 0) {
1036 ret = control;
1037 goto out;
1038 }
1039
1040 control &= ~mask;
1041 control |= value;
1042
1043 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
1044out:
1045 mutex_unlock(lock);
1046
1047 return ret;
1048}
1049
1050static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
1051 unsigned long parent_rate)
1052{
1053 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1054 int control;
1055 int rate_sel = 0;
1056
1057 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
1058 if (control < 0)
1059 return control;
1060 if (control & DS1337_BIT_RS1)
1061 rate_sel += 1;
1062 if (control & DS1337_BIT_RS2)
1063 rate_sel += 2;
1064
1065 return ds3231_clk_sqw_rates[rate_sel];
1066}
1067
1068static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
1069 unsigned long *prate)
1070{
1071 int i;
1072
1073 for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
1074 if (ds3231_clk_sqw_rates[i] <= rate)
1075 return ds3231_clk_sqw_rates[i];
1076 }
1077
1078 return 0;
1079}
1080
1081static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
1082 unsigned long parent_rate)
1083{
1084 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1085 int control = 0;
1086 int rate_sel;
1087
1088 for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
1089 rate_sel++) {
1090 if (ds3231_clk_sqw_rates[rate_sel] == rate)
1091 break;
1092 }
1093
1094 if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
1095 return -EINVAL;
1096
1097 if (rate_sel & 1)
1098 control |= DS1337_BIT_RS1;
1099 if (rate_sel & 2)
1100 control |= DS1337_BIT_RS2;
1101
1102 return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
1103 control);
1104}
1105
1106static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
1107{
1108 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1109
1110 return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
1111}
1112
1113static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
1114{
1115 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1116
1117 ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
1118}
1119
1120static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
1121{
1122 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1123 int control;
1124
1125 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
1126 if (control < 0)
1127 return control;
1128
1129 return !(control & DS1337_BIT_INTCN);
1130}
1131
1132static const struct clk_ops ds3231_clk_sqw_ops = {
1133 .prepare = ds3231_clk_sqw_prepare,
1134 .unprepare = ds3231_clk_sqw_unprepare,
1135 .is_prepared = ds3231_clk_sqw_is_prepared,
1136 .recalc_rate = ds3231_clk_sqw_recalc_rate,
1137 .round_rate = ds3231_clk_sqw_round_rate,
1138 .set_rate = ds3231_clk_sqw_set_rate,
1139};
1140
1141static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
1142 unsigned long parent_rate)
1143{
1144 return 32768;
1145}
1146
1147static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
1148{
1149 struct i2c_client *client = ds1307->client;
1150 struct mutex *lock = &ds1307->rtc->ops_lock;
1151 int status;
1152 int ret;
1153
1154 mutex_lock(lock);
1155
1156 status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
1157 if (status < 0) {
1158 ret = status;
1159 goto out;
1160 }
1161
1162 if (enable)
1163 status |= DS3231_BIT_EN32KHZ;
1164 else
1165 status &= ~DS3231_BIT_EN32KHZ;
1166
1167 ret = i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, status);
1168out:
1169 mutex_unlock(lock);
1170
1171 return ret;
1172}
1173
1174static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
1175{
1176 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1177
1178 return ds3231_clk_32khz_control(ds1307, true);
1179}
1180
1181static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
1182{
1183 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1184
1185 ds3231_clk_32khz_control(ds1307, false);
1186}
1187
1188static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
1189{
1190 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1191 int status;
1192
1193 status = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_STATUS);
1194 if (status < 0)
1195 return status;
1196
1197 return !!(status & DS3231_BIT_EN32KHZ);
1198}
1199
1200static const struct clk_ops ds3231_clk_32khz_ops = {
1201 .prepare = ds3231_clk_32khz_prepare,
1202 .unprepare = ds3231_clk_32khz_unprepare,
1203 .is_prepared = ds3231_clk_32khz_is_prepared,
1204 .recalc_rate = ds3231_clk_32khz_recalc_rate,
1205};
1206
1207static struct clk_init_data ds3231_clks_init[] = {
1208 [DS3231_CLK_SQW] = {
1209 .name = "ds3231_clk_sqw",
1210 .ops = &ds3231_clk_sqw_ops,
1211 },
1212 [DS3231_CLK_32KHZ] = {
1213 .name = "ds3231_clk_32khz",
1214 .ops = &ds3231_clk_32khz_ops,
1215 },
1216};
1217
1218static int ds3231_clks_register(struct ds1307 *ds1307)
1219{
1220 struct i2c_client *client = ds1307->client;
1221 struct device_node *node = client->dev.of_node;
1222 struct clk_onecell_data *onecell;
1223 int i;
1224
1225 onecell = devm_kzalloc(&client->dev, sizeof(*onecell), GFP_KERNEL);
1226 if (!onecell)
1227 return -ENOMEM;
1228
1229 onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
1230 onecell->clks = devm_kcalloc(&client->dev, onecell->clk_num,
1231 sizeof(onecell->clks[0]), GFP_KERNEL);
1232 if (!onecell->clks)
1233 return -ENOMEM;
1234
1235 for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
1236 struct clk_init_data init = ds3231_clks_init[i];
1237
1238 /*
1239 * Interrupt signal due to alarm conditions and square-wave
1240 * output share same pin, so don't initialize both.
1241 */
1242 if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
1243 continue;
1244
1245 /* optional override of the clockname */
1246 of_property_read_string_index(node, "clock-output-names", i,
1247 &init.name);
1248 ds1307->clks[i].init = &init;
1249
1250 onecell->clks[i] = devm_clk_register(&client->dev,
1251 &ds1307->clks[i]);
1252 if (IS_ERR(onecell->clks[i]))
1253 return PTR_ERR(onecell->clks[i]);
1254 }
1255
1256 if (!node)
1257 return 0;
1258
1259 of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
1260
1261 return 0;
1262}
1263
1264static void ds1307_clks_register(struct ds1307 *ds1307)
1265{
1266 int ret;
1267
1268 if (ds1307->type != ds_3231)
1269 return;
1270
1271 ret = ds3231_clks_register(ds1307);
1272 if (ret) {
1273 dev_warn(&ds1307->client->dev,
1274 "unable to register clock device %d\n", ret);
1275 }
1276}
1277
1278#else
1279
1280static void ds1307_clks_register(struct ds1307 *ds1307)
1281{
1282}
1283
1284#endif /* CONFIG_COMMON_CLK */
1285
1286static int ds1307_probe(struct i2c_client *client,
1287 const struct i2c_device_id *id)
1288{
1289 struct ds1307 *ds1307;
1290 int err = -ENODEV;
1291 int tmp, wday;
1292 struct chip_desc *chip;
1293 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
1294 bool want_irq = false;
1295 bool ds1307_can_wakeup_device = false;
1296 unsigned char *buf;
1297 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
1298 struct rtc_time tm;
1299 unsigned long timestamp;
1300
1301 irq_handler_t irq_handler = ds1307_irq;
1302
1303 static const int bbsqi_bitpos[] = {
1304 [ds_1337] = 0,
1305 [ds_1339] = DS1339_BIT_BBSQI,
1306 [ds_3231] = DS3231_BIT_BBSQW,
1307 };
1308 const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
1309
1310 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
1311 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
1312 return -EIO;
1313
1314 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
1315 if (!ds1307)
1316 return -ENOMEM;
1317
1318 i2c_set_clientdata(client, ds1307);
1319
1320 ds1307->client = client;
1321 if (id) {
1322 chip = &chips[id->driver_data];
1323 ds1307->type = id->driver_data;
1324 } else {
1325 const struct acpi_device_id *acpi_id;
1326
1327 acpi_id = acpi_match_device(ACPI_PTR(ds1307_acpi_ids),
1328 &client->dev);
1329 if (!acpi_id)
1330 return -ENODEV;
1331 chip = &chips[acpi_id->driver_data];
1332 ds1307->type = acpi_id->driver_data;
1333 }
1334
1335 if (!pdata)
1336 ds1307_trickle_init(client, chip);
1337 else if (pdata->trickle_charger_setup)
1338 chip->trickle_charger_setup = pdata->trickle_charger_setup;
1339
1340 if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
1341 dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
1342 DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
1343 chip->trickle_charger_reg);
1344 i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
1345 DS13XX_TRICKLE_CHARGER_MAGIC |
1346 chip->trickle_charger_setup);
1347 }
1348
1349 buf = ds1307->regs;
1350 if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1351 ds1307->read_block_data = ds1307_native_smbus_read_block_data;
1352 ds1307->write_block_data = ds1307_native_smbus_write_block_data;
1353 } else {
1354 ds1307->read_block_data = ds1307_read_block_data;
1355 ds1307->write_block_data = ds1307_write_block_data;
1356 }
1357
1358#ifdef CONFIG_OF
1359/*
1360 * For devices with no IRQ directly connected to the SoC, the RTC chip
1361 * can be forced as a wakeup source by stating that explicitly in
1362 * the device's .dts file using the "wakeup-source" boolean property.
1363 * If the "wakeup-source" property is set, don't request an IRQ.
1364 * This will guarantee the 'wakealarm' sysfs entry is available on the device,
1365 * if supported by the RTC.
1366 */
1367 if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
1368 ds1307_can_wakeup_device = true;
1369 }
1370 /* Intersil ISL12057 DT backward compatibility */
1371 if (of_property_read_bool(client->dev.of_node,
1372 "isil,irq2-can-wakeup-machine")) {
1373 ds1307_can_wakeup_device = true;
1374 }
1375#endif
1376
1377 switch (ds1307->type) {
1378 case ds_1337:
1379 case ds_1339:
1380 case ds_3231:
1381 /* get registers that the "rtc" read below won't read... */
1382 tmp = ds1307->read_block_data(ds1307->client,
1383 DS1337_REG_CONTROL, 2, buf);
1384 if (tmp != 2) {
1385 dev_dbg(&client->dev, "read error %d\n", tmp);
1386 err = -EIO;
1387 goto exit;
1388 }
1389
1390 /* oscillator off? turn it on, so clock can tick. */
1391 if (ds1307->regs[0] & DS1337_BIT_nEOSC)
1392 ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
1393
1394 /*
1395 * Using IRQ or defined as wakeup-source?
1396 * Disable the square wave and both alarms.
1397 * For some variants, be sure alarms can trigger when we're
1398 * running on Vbackup (BBSQI/BBSQW)
1399 */
1400 if (chip->alarm && (ds1307->client->irq > 0 ||
1401 ds1307_can_wakeup_device)) {
1402 ds1307->regs[0] |= DS1337_BIT_INTCN
1403 | bbsqi_bitpos[ds1307->type];
1404 ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
1405
1406 want_irq = true;
1407 }
1408
1409 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
1410 ds1307->regs[0]);
1411
1412 /* oscillator fault? clear flag, and warn */
1413 if (ds1307->regs[1] & DS1337_BIT_OSF) {
1414 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
1415 ds1307->regs[1] & ~DS1337_BIT_OSF);
1416 dev_warn(&client->dev, "SET TIME!\n");
1417 }
1418 break;
1419
1420 case rx_8025:
1421 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1422 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1423 if (tmp != 2) {
1424 dev_dbg(&client->dev, "read error %d\n", tmp);
1425 err = -EIO;
1426 goto exit;
1427 }
1428
1429 /* oscillator off? turn it on, so clock can tick. */
1430 if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
1431 ds1307->regs[1] |= RX8025_BIT_XST;
1432 i2c_smbus_write_byte_data(client,
1433 RX8025_REG_CTRL2 << 4 | 0x08,
1434 ds1307->regs[1]);
1435 dev_warn(&client->dev,
1436 "oscillator stop detected - SET TIME!\n");
1437 }
1438
1439 if (ds1307->regs[1] & RX8025_BIT_PON) {
1440 ds1307->regs[1] &= ~RX8025_BIT_PON;
1441 i2c_smbus_write_byte_data(client,
1442 RX8025_REG_CTRL2 << 4 | 0x08,
1443 ds1307->regs[1]);
1444 dev_warn(&client->dev, "power-on detected\n");
1445 }
1446
1447 if (ds1307->regs[1] & RX8025_BIT_VDET) {
1448 ds1307->regs[1] &= ~RX8025_BIT_VDET;
1449 i2c_smbus_write_byte_data(client,
1450 RX8025_REG_CTRL2 << 4 | 0x08,
1451 ds1307->regs[1]);
1452 dev_warn(&client->dev, "voltage drop detected\n");
1453 }
1454
1455 /* make sure we are running in 24hour mode */
1456 if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
1457 u8 hour;
1458
1459 /* switch to 24 hour mode */
1460 i2c_smbus_write_byte_data(client,
1461 RX8025_REG_CTRL1 << 4 | 0x08,
1462 ds1307->regs[0] |
1463 RX8025_BIT_2412);
1464
1465 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1466 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1467 if (tmp != 2) {
1468 dev_dbg(&client->dev, "read error %d\n", tmp);
1469 err = -EIO;
1470 goto exit;
1471 }
1472
1473 /* correct hour */
1474 hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
1475 if (hour == 12)
1476 hour = 0;
1477 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1478 hour += 12;
1479
1480 i2c_smbus_write_byte_data(client,
1481 DS1307_REG_HOUR << 4 | 0x08,
1482 hour);
1483 }
1484 break;
1485 case ds_1388:
1486 ds1307->offset = 1; /* Seconds starts at 1 */
1487 break;
1488 case mcp794xx:
1489 rtc_ops = &mcp794xx_rtc_ops;
1490 if (ds1307->client->irq > 0 && chip->alarm) {
1491 irq_handler = mcp794xx_irq;
1492 want_irq = true;
1493 }
1494 break;
1495 default:
1496 break;
1497 }
1498
1499read_rtc:
1500 /* read RTC registers */
1501 tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
1502 if (tmp != 8) {
1503 dev_dbg(&client->dev, "read error %d\n", tmp);
1504 err = -EIO;
1505 goto exit;
1506 }
1507
1508 /*
1509 * minimal sanity checking; some chips (like DS1340) don't
1510 * specify the extra bits as must-be-zero, but there are
1511 * still a few values that are clearly out-of-range.
1512 */
1513 tmp = ds1307->regs[DS1307_REG_SECS];
1514 switch (ds1307->type) {
1515 case ds_1307:
1516 case m41t00:
1517 /* clock halted? turn it on, so clock can tick. */
1518 if (tmp & DS1307_BIT_CH) {
1519 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1520 dev_warn(&client->dev, "SET TIME!\n");
1521 goto read_rtc;
1522 }
1523 break;
1524 case ds_1338:
1525 /* clock halted? turn it on, so clock can tick. */
1526 if (tmp & DS1307_BIT_CH)
1527 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1528
1529 /* oscillator fault? clear flag, and warn */
1530 if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
1531 i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
1532 ds1307->regs[DS1307_REG_CONTROL]
1533 & ~DS1338_BIT_OSF);
1534 dev_warn(&client->dev, "SET TIME!\n");
1535 goto read_rtc;
1536 }
1537 break;
1538 case ds_1340:
1539 /* clock halted? turn it on, so clock can tick. */
1540 if (tmp & DS1340_BIT_nEOSC)
1541 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1542
1543 tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
1544 if (tmp < 0) {
1545 dev_dbg(&client->dev, "read error %d\n", tmp);
1546 err = -EIO;
1547 goto exit;
1548 }
1549
1550 /* oscillator fault? clear flag, and warn */
1551 if (tmp & DS1340_BIT_OSF) {
1552 i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
1553 dev_warn(&client->dev, "SET TIME!\n");
1554 }
1555 break;
1556 case mcp794xx:
1557 /* make sure that the backup battery is enabled */
1558 if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
1559 i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
1560 ds1307->regs[DS1307_REG_WDAY]
1561 | MCP794XX_BIT_VBATEN);
1562 }
1563
1564 /* clock halted? turn it on, so clock can tick. */
1565 if (!(tmp & MCP794XX_BIT_ST)) {
1566 i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
1567 MCP794XX_BIT_ST);
1568 dev_warn(&client->dev, "SET TIME!\n");
1569 goto read_rtc;
1570 }
1571
1572 break;
1573 default:
1574 break;
1575 }
1576
1577 tmp = ds1307->regs[DS1307_REG_HOUR];
1578 switch (ds1307->type) {
1579 case ds_1340:
1580 case m41t00:
1581 /*
1582 * NOTE: ignores century bits; fix before deploying
1583 * systems that will run through year 2100.
1584 */
1585 break;
1586 case rx_8025:
1587 break;
1588 default:
1589 if (!(tmp & DS1307_BIT_12HR))
1590 break;
1591
1592 /*
1593 * Be sure we're in 24 hour mode. Multi-master systems
1594 * take note...
1595 */
1596 tmp = bcd2bin(tmp & 0x1f);
1597 if (tmp == 12)
1598 tmp = 0;
1599 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1600 tmp += 12;
1601 i2c_smbus_write_byte_data(client,
1602 ds1307->offset + DS1307_REG_HOUR,
1603 bin2bcd(tmp));
1604 }
1605
1606 /*
1607 * Some IPs have weekday reset value = 0x1 which might not correct
1608 * hence compute the wday using the current date/month/year values
1609 */
1610 ds1307_get_time(&client->dev, &tm);
1611 wday = tm.tm_wday;
1612 timestamp = rtc_tm_to_time64(&tm);
1613 rtc_time64_to_tm(timestamp, &tm);
1614
1615 /*
1616 * Check if reset wday is different from the computed wday
1617 * If different then set the wday which we computed using
1618 * timestamp
1619 */
1620 if (wday != tm.tm_wday) {
1621 wday = i2c_smbus_read_byte_data(client, MCP794XX_REG_WEEKDAY);
1622 wday = wday & ~MCP794XX_REG_WEEKDAY_WDAY_MASK;
1623 wday = wday | (tm.tm_wday + 1);
1624 i2c_smbus_write_byte_data(client, MCP794XX_REG_WEEKDAY, wday);
1625 }
1626
1627 if (want_irq) {
1628 device_set_wakeup_capable(&client->dev, true);
1629 set_bit(HAS_ALARM, &ds1307->flags);
1630 }
1631 ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
1632 rtc_ops, THIS_MODULE);
1633 if (IS_ERR(ds1307->rtc)) {
1634 return PTR_ERR(ds1307->rtc);
1635 }
1636
1637 if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
1638 /* Disable request for an IRQ */
1639 want_irq = false;
1640 dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
1641 /* We cannot support UIE mode if we do not have an IRQ line */
1642 ds1307->rtc->uie_unsupported = 1;
1643 }
1644
1645 if (want_irq) {
1646 err = devm_request_threaded_irq(&client->dev,
1647 client->irq, NULL, irq_handler,
1648 IRQF_SHARED | IRQF_ONESHOT,
1649 ds1307->rtc->name, client);
1650 if (err) {
1651 client->irq = 0;
1652 device_set_wakeup_capable(&client->dev, false);
1653 clear_bit(HAS_ALARM, &ds1307->flags);
1654 dev_err(&client->dev, "unable to request IRQ!\n");
1655 } else
1656 dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
1657 }
1658
1659 if (chip->nvram_size) {
1660
1661 ds1307->nvram = devm_kzalloc(&client->dev,
1662 sizeof(struct bin_attribute),
1663 GFP_KERNEL);
1664 if (!ds1307->nvram) {
1665 dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n");
1666 } else {
1667
1668 ds1307->nvram->attr.name = "nvram";
1669 ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
1670
1671 sysfs_bin_attr_init(ds1307->nvram);
1672
1673 ds1307->nvram->read = ds1307_nvram_read;
1674 ds1307->nvram->write = ds1307_nvram_write;
1675 ds1307->nvram->size = chip->nvram_size;
1676 ds1307->nvram_offset = chip->nvram_offset;
1677
1678 err = sysfs_create_bin_file(&client->dev.kobj,
1679 ds1307->nvram);
1680 if (err) {
1681 dev_err(&client->dev,
1682 "unable to create sysfs file: %s\n",
1683 ds1307->nvram->attr.name);
1684 } else {
1685 set_bit(HAS_NVRAM, &ds1307->flags);
1686 dev_info(&client->dev, "%zu bytes nvram\n",
1687 ds1307->nvram->size);
1688 }
1689 }
1690 }
1691
1692 ds1307_hwmon_register(ds1307);
1693 ds1307_clks_register(ds1307);
1694
1695 return 0;
1696
1697exit:
1698 return err;
1699}
1700
1701static int ds1307_remove(struct i2c_client *client)
1702{
1703 struct ds1307 *ds1307 = i2c_get_clientdata(client);
1704
1705 if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
1706 sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
1707
1708 return 0;
1709}
1710
1711static struct i2c_driver ds1307_driver = {
1712 .driver = {
1713 .name = "rtc-ds1307",
1714 .acpi_match_table = ACPI_PTR(ds1307_acpi_ids),
1715 },
1716 .probe = ds1307_probe,
1717 .remove = ds1307_remove,
1718 .id_table = ds1307_id,
1719};
1720
1721module_i2c_driver(ds1307_driver);
1722
1723MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
1724MODULE_LICENSE("GPL");