Linux Audio

Check our new training course

Loading...
Note: File does not exist in v6.13.7.
  1/*
  2 * Copyright 2012 ST-Ericsson AB
  3 *
  4 * The code contained herein is licensed under the GNU General Public
  5 * License. You may obtain a copy of the GNU General Public License
  6 * Version 2 or later at the following locations:
  7 *
  8 * http://www.opensource.org/licenses/gpl-license.html
  9 * http://www.gnu.org/copyleft/gpl.html
 10 */
 11
 12#include <dt-bindings/interrupt-controller/irq.h>
 13#include "ste-dbx5x0.dtsi"
 14#include "ste-href-family-pinctrl.dtsi"
 15
 16/ {
 17	memory {
 18		reg = <0x00000000 0x20000000>;
 19	};
 20
 21	soc {
 22		usb_per5@a03e0000 {
 23			pinctrl-names = "default", "sleep";
 24			pinctrl-0 = <&musb_default_mode>;
 25			pinctrl-1 = <&musb_sleep_mode>;
 26		};
 27
 28		uart@80120000 {
 29			pinctrl-names = "default", "sleep";
 30			pinctrl-0 = <&uart0_default_mode>;
 31			pinctrl-1 = <&uart0_sleep_mode>;
 32			status = "okay";
 33		};
 34
 35		uart@80121000 {
 36			pinctrl-names = "default", "sleep";
 37			pinctrl-0 = <&uart1_default_mode>;
 38			pinctrl-1 = <&uart1_sleep_mode>;
 39			status = "okay";
 40		};
 41
 42		uart@80007000 {
 43			pinctrl-names = "default", "sleep";
 44			pinctrl-0 = <&uart2_default_mode>;
 45			pinctrl-1 = <&uart2_sleep_mode>;
 46			status = "okay";
 47		};
 48
 49		i2c@80004000 {
 50			pinctrl-names = "default","sleep";
 51			pinctrl-0 = <&i2c0_default_mode>;
 52			pinctrl-1 = <&i2c0_sleep_mode>;
 53		};
 54
 55		i2c@80122000 {
 56			pinctrl-names = "default","sleep";
 57			pinctrl-0 = <&i2c1_default_mode>;
 58			pinctrl-1 = <&i2c1_sleep_mode>;
 59		};
 60
 61		i2c@80128000 {
 62			pinctrl-names = "default","sleep";
 63			pinctrl-0 = <&i2c2_default_mode>;
 64			pinctrl-1 = <&i2c2_sleep_mode>;
 65			lp5521@33 {
 66				compatible = "national,lp5521";
 67				reg = <0x33>;
 68				label = "lp5521_pri";
 69				clock-mode = /bits/ 8 <2>;
 70				chan0 {
 71					led-cur = /bits/ 8 <0x2f>;
 72					max-cur = /bits/ 8 <0x5f>;
 73					linux,default-trigger = "heartbeat";
 74				};
 75				chan1 {
 76					led-cur = /bits/ 8 <0x2f>;
 77					max-cur = /bits/ 8 <0x5f>;
 78				};
 79				chan2 {
 80					led-cur = /bits/ 8 <0x2f>;
 81					max-cur = /bits/ 8 <0x5f>;
 82				};
 83			};
 84			lp5521@34 {
 85				compatible = "national,lp5521";
 86				reg = <0x34>;
 87				label = "lp5521_sec";
 88				clock-mode = /bits/ 8 <2>;
 89				chan0 {
 90					led-cur = /bits/ 8 <0x2f>;
 91					max-cur = /bits/ 8 <0x5f>;
 92				};
 93				chan1 {
 94					led-cur = /bits/ 8 <0x2f>;
 95					max-cur = /bits/ 8 <0x5f>;
 96				};
 97				chan2 {
 98					led-cur = /bits/ 8 <0x2f>;
 99					max-cur = /bits/ 8 <0x5f>;
100				};
101			};
102			bh1780@29 {
103				compatible = "rohm,bh1780gli";
104				reg = <0x29>;
105			};
106		};
107
108		i2c@80110000 {
109			pinctrl-names = "default","sleep";
110			pinctrl-0 = <&i2c3_default_mode>;
111			pinctrl-1 = <&i2c3_sleep_mode>;
112		};
113
114		// External Micro SD slot
115		sdi0_per1@80126000 {
116			arm,primecell-periphid = <0x10480180>;
117			max-frequency = <100000000>;
118			bus-width = <4>;
119			mmc-cap-sd-highspeed;
120			mmc-cap-mmc-highspeed;
121			vmmc-supply = <&ab8500_ldo_aux3_reg>;
122			vqmmc-supply = <&vmmci>;
123			pinctrl-names = "default", "sleep";
124			pinctrl-0 = <&sdi0_default_mode>;
125			pinctrl-1 = <&sdi0_sleep_mode>;
126
127			status = "okay";
128		};
129
130		// WLAN SDIO channel
131		sdi1_per2@80118000 {
132			arm,primecell-periphid = <0x10480180>;
133			max-frequency = <100000000>;
134			bus-width = <4>;
135			pinctrl-names = "default", "sleep";
136			pinctrl-0 = <&sdi1_default_mode>;
137			pinctrl-1 = <&sdi1_sleep_mode>;
138
139			status = "okay";
140		};
141
142		// PoP:ed eMMC
143		sdi2_per3@80005000 {
144			arm,primecell-periphid = <0x10480180>;
145			max-frequency = <100000000>;
146			bus-width = <8>;
147			mmc-cap-mmc-highspeed;
148			pinctrl-names = "default", "sleep";
149			pinctrl-0 = <&sdi2_default_mode>;
150			pinctrl-1 = <&sdi2_sleep_mode>;
151
152			status = "okay";
153		};
154
155		// On-board eMMC
156		sdi4_per2@80114000 {
157			arm,primecell-periphid = <0x10480180>;
158		        max-frequency = <100000000>;
159			bus-width = <8>;
160			mmc-cap-mmc-highspeed;
161			vmmc-supply = <&ab8500_ldo_aux2_reg>;
162			pinctrl-names = "default", "sleep";
163			pinctrl-0 = <&sdi4_default_mode>;
164			pinctrl-1 = <&sdi4_sleep_mode>;
165
166			status = "okay";
167		};
168
169		sound {
170			compatible = "stericsson,snd-soc-mop500";
171
172			stericsson,cpu-dai = <&msp1 &msp3>;
173			stericsson,audio-codec = <&codec>;
174		};
175
176		msp0: msp@80123000 {
177			pinctrl-names = "default";
178			pinctrl-0 = <&msp0_default_mode>;
179			status = "okay";
180		};
181
182		msp1: msp@80124000 {
183			pinctrl-names = "default";
184			pinctrl-0 = <&msp1_default_mode>;
185			status = "okay";
186		};
187
188		msp2: msp@80117000 {
189			pinctrl-names = "default";
190			pinctrl-0 = <&msp2_default_mode>;
191		};
192
193		msp3: msp@80125000 {
194			status = "okay";
195		};
196
197		prcmu@80157000 {
198			ab8500 {
199				ab8500-gpio {
200					compatible = "stericsson,ab8500-gpio";
201				};
202
203				ab8500-regulators {
204					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
205						regulator-name = "V-DISPLAY";
206					};
207
208					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
209						regulator-name = "V-eMMC1";
210					};
211
212					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
213						regulator-name = "V-MMC-SD";
214					};
215
216					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
217						regulator-name = "V-INTCORE";
218					};
219
220					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
221						regulator-name = "V-TVOUT";
222					};
223
224					ab8500_ldo_usb_reg: ab8500_ldo_usb {
225						regulator-name = "dummy";
226					};
227
228					ab8500_ldo_audio_reg: ab8500_ldo_audio {
229						regulator-name = "V-AUD";
230					};
231
232					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
233						regulator-name = "V-AMIC1";
234					};
235
236					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
237						regulator-name = "V-AMIC2";
238					};
239
240					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
241						regulator-name = "V-DMIC";
242					};
243
244					ab8500_ldo_ana_reg: ab8500_ldo_ana {
245						regulator-name = "V-CSI/DSI";
246					};
247				};
248			};
249		};
250
251		mcde@a0350000 {
252			pinctrl-names = "default", "sleep";
253			pinctrl-0 = <&lcd_default_mode>;
254			pinctrl-1 = <&lcd_sleep_mode>;
255		};
256	};
257};