Loading...
Note: File does not exist in v6.13.7.
1/*
2 * Copyright 2012 ST-Ericsson AB
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include <dt-bindings/interrupt-controller/irq.h>
13#include "ste-dbx5x0.dtsi"
14#include "ste-href-family-pinctrl.dtsi"
15
16/ {
17 memory {
18 reg = <0x00000000 0x20000000>;
19 };
20
21 soc {
22 usb_per5@a03e0000 {
23 pinctrl-names = "default", "sleep";
24 pinctrl-0 = <&musb_default_mode>;
25 pinctrl-1 = <&musb_sleep_mode>;
26 };
27
28 uart@80120000 {
29 pinctrl-names = "default", "sleep";
30 pinctrl-0 = <&uart0_default_mode>;
31 pinctrl-1 = <&uart0_sleep_mode>;
32 status = "okay";
33 };
34
35 /* This UART is unused and thus left disabled */
36 uart@80121000 {
37 pinctrl-names = "default", "sleep";
38 pinctrl-0 = <&uart1_default_mode>;
39 pinctrl-1 = <&uart1_sleep_mode>;
40 };
41
42 uart@80007000 {
43 pinctrl-names = "default", "sleep";
44 pinctrl-0 = <&uart2_default_mode>;
45 pinctrl-1 = <&uart2_sleep_mode>;
46 status = "okay";
47 };
48
49 i2c@80004000 {
50 pinctrl-names = "default","sleep";
51 pinctrl-0 = <&i2c0_default_mode>;
52 pinctrl-1 = <&i2c0_sleep_mode>;
53 };
54
55 i2c@80122000 {
56 pinctrl-names = "default","sleep";
57 pinctrl-0 = <&i2c1_default_mode>;
58 pinctrl-1 = <&i2c1_sleep_mode>;
59 };
60
61 i2c@80128000 {
62 pinctrl-names = "default","sleep";
63 pinctrl-0 = <&i2c2_default_mode>;
64 pinctrl-1 = <&i2c2_sleep_mode>;
65 lp5521@33 {
66 compatible = "national,lp5521";
67 reg = <0x33>;
68 label = "lp5521_pri";
69 clock-mode = /bits/ 8 <2>;
70 chan0 {
71 led-cur = /bits/ 8 <0x2f>;
72 max-cur = /bits/ 8 <0x5f>;
73 linux,default-trigger = "heartbeat";
74 };
75 chan1 {
76 led-cur = /bits/ 8 <0x2f>;
77 max-cur = /bits/ 8 <0x5f>;
78 };
79 chan2 {
80 led-cur = /bits/ 8 <0x2f>;
81 max-cur = /bits/ 8 <0x5f>;
82 };
83 };
84 lp5521@34 {
85 compatible = "national,lp5521";
86 reg = <0x34>;
87 label = "lp5521_sec";
88 clock-mode = /bits/ 8 <2>;
89 chan0 {
90 led-cur = /bits/ 8 <0x2f>;
91 max-cur = /bits/ 8 <0x5f>;
92 };
93 chan1 {
94 led-cur = /bits/ 8 <0x2f>;
95 max-cur = /bits/ 8 <0x5f>;
96 };
97 chan2 {
98 led-cur = /bits/ 8 <0x2f>;
99 max-cur = /bits/ 8 <0x5f>;
100 };
101 };
102 bh1780@29 {
103 compatible = "rohm,bh1780gli";
104 reg = <0x29>;
105 };
106 };
107
108 i2c@80110000 {
109 pinctrl-names = "default","sleep";
110 pinctrl-0 = <&i2c3_default_mode>;
111 pinctrl-1 = <&i2c3_sleep_mode>;
112 };
113
114 vmmci: regulator-gpio {
115 compatible = "regulator-gpio";
116
117 regulator-min-microvolt = <1800000>;
118 regulator-max-microvolt = <2900000>;
119 regulator-name = "mmci-reg";
120 regulator-type = "voltage";
121
122 startup-delay-us = <100>;
123 enable-active-high;
124
125 states = <1800000 0x1
126 2900000 0x0>;
127 };
128
129 // External Micro SD slot
130 sdi0_per1@80126000 {
131 arm,primecell-periphid = <0x10480180>;
132 max-frequency = <100000000>;
133 bus-width = <4>;
134 cap-sd-highspeed;
135 cap-mmc-highspeed;
136 sd-uhs-sdr12;
137 sd-uhs-sdr25;
138 full-pwr-cycle;
139 st,sig-dir-dat0;
140 st,sig-dir-dat2;
141 st,sig-dir-cmd;
142 st,sig-pin-fbclk;
143 vmmc-supply = <&ab8500_ldo_aux3_reg>;
144 vqmmc-supply = <&vmmci>;
145 pinctrl-names = "default", "sleep";
146 pinctrl-0 = <&sdi0_default_mode>;
147 pinctrl-1 = <&sdi0_sleep_mode>;
148
149 status = "okay";
150 };
151
152 // WLAN SDIO channel
153 sdi1_per2@80118000 {
154 arm,primecell-periphid = <0x10480180>;
155 max-frequency = <100000000>;
156 bus-width = <4>;
157 non-removable;
158 pinctrl-names = "default", "sleep";
159 pinctrl-0 = <&sdi1_default_mode>;
160 pinctrl-1 = <&sdi1_sleep_mode>;
161
162 status = "okay";
163 };
164
165 // PoP:ed eMMC
166 sdi2_per3@80005000 {
167 arm,primecell-periphid = <0x10480180>;
168 max-frequency = <100000000>;
169 bus-width = <8>;
170 cap-mmc-highspeed;
171 non-removable;
172 vmmc-supply = <&db8500_vsmps2_reg>;
173 pinctrl-names = "default", "sleep";
174 pinctrl-0 = <&sdi2_default_mode>;
175 pinctrl-1 = <&sdi2_sleep_mode>;
176
177 status = "okay";
178 };
179
180 // On-board eMMC
181 sdi4_per2@80114000 {
182 arm,primecell-periphid = <0x10480180>;
183 max-frequency = <100000000>;
184 bus-width = <8>;
185 cap-mmc-highspeed;
186 non-removable;
187 vmmc-supply = <&ab8500_ldo_aux2_reg>;
188 pinctrl-names = "default", "sleep";
189 pinctrl-0 = <&sdi4_default_mode>;
190 pinctrl-1 = <&sdi4_sleep_mode>;
191
192 status = "okay";
193 };
194
195 sound {
196 compatible = "stericsson,snd-soc-mop500";
197
198 stericsson,cpu-dai = <&msp1 &msp3>;
199 stericsson,audio-codec = <&codec>;
200 };
201
202 msp0: msp@80123000 {
203 pinctrl-names = "default";
204 pinctrl-0 = <&msp0_default_mode>;
205 status = "okay";
206 };
207
208 msp1: msp@80124000 {
209 pinctrl-names = "default";
210 pinctrl-0 = <&msp1_default_mode>;
211 status = "okay";
212 };
213
214 msp2: msp@80117000 {
215 pinctrl-names = "default";
216 pinctrl-0 = <&msp2_default_mode>;
217 };
218
219 msp3: msp@80125000 {
220 status = "okay";
221 };
222
223 prcmu@80157000 {
224 ab8500 {
225 ab8500-gpio {
226 compatible = "stericsson,ab8500-gpio";
227 };
228
229 ab8500-regulators {
230 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
231 regulator-name = "V-DISPLAY";
232 };
233
234 ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
235 regulator-name = "V-eMMC1";
236 };
237
238 ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
239 regulator-name = "V-MMC-SD";
240 };
241
242 ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
243 regulator-name = "V-INTCORE";
244 };
245
246 ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
247 regulator-name = "V-TVOUT";
248 };
249
250 ab8500_ldo_usb_reg: ab8500_ldo_usb {
251 regulator-name = "dummy";
252 };
253
254 ab8500_ldo_audio_reg: ab8500_ldo_audio {
255 regulator-name = "V-AUD";
256 };
257
258 ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
259 regulator-name = "V-AMIC1";
260 };
261
262 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
263 regulator-name = "V-AMIC2";
264 };
265
266 ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
267 regulator-name = "V-DMIC";
268 };
269
270 ab8500_ldo_ana_reg: ab8500_ldo_ana {
271 regulator-name = "V-CSI/DSI";
272 };
273 };
274 };
275 };
276
277 mcde@a0350000 {
278 pinctrl-names = "default", "sleep";
279 pinctrl-0 = <&lcd_default_mode>;
280 pinctrl-1 = <&lcd_sleep_mode>;
281 };
282 };
283};