Loading...
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h>
61#include <linux/dma-mapping.h>
62#include <linux/kthread.h>
63#include <scsi/scsi_host.h>
64
65#include "mptbase.h"
66#include "lsi/mpi_log_fc.h"
67
68/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
69#define my_NAME "Fusion MPT base driver"
70#define my_VERSION MPT_LINUX_VERSION_COMMON
71#define MYNAM "mptbase"
72
73MODULE_AUTHOR(MODULEAUTHOR);
74MODULE_DESCRIPTION(my_NAME);
75MODULE_LICENSE("GPL");
76MODULE_VERSION(my_VERSION);
77
78/*
79 * cmd line parameters
80 */
81
82static int mpt_msi_enable_spi;
83module_param(mpt_msi_enable_spi, int, 0);
84MODULE_PARM_DESC(mpt_msi_enable_spi,
85 " Enable MSI Support for SPI controllers (default=0)");
86
87static int mpt_msi_enable_fc;
88module_param(mpt_msi_enable_fc, int, 0);
89MODULE_PARM_DESC(mpt_msi_enable_fc,
90 " Enable MSI Support for FC controllers (default=0)");
91
92static int mpt_msi_enable_sas;
93module_param(mpt_msi_enable_sas, int, 0);
94MODULE_PARM_DESC(mpt_msi_enable_sas,
95 " Enable MSI Support for SAS controllers (default=0)");
96
97static int mpt_channel_mapping;
98module_param(mpt_channel_mapping, int, 0);
99MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
100
101static int mpt_debug_level;
102static int mpt_set_debug_level(const char *val, const struct kernel_param *kp);
103module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
104 &mpt_debug_level, 0600);
105MODULE_PARM_DESC(mpt_debug_level,
106 " debug level - refer to mptdebug.h - (default=0)");
107
108int mpt_fwfault_debug;
109EXPORT_SYMBOL(mpt_fwfault_debug);
110module_param(mpt_fwfault_debug, int, 0600);
111MODULE_PARM_DESC(mpt_fwfault_debug,
112 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
113
114static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
115 [MPT_MAX_CALLBACKNAME_LEN+1];
116
117#ifdef MFCNT
118static int mfcounter = 0;
119#define PRINT_MF_COUNT 20000
120#endif
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * Public data...
125 */
126
127#define WHOINIT_UNKNOWN 0xAA
128
129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
130/*
131 * Private data...
132 */
133 /* Adapter link list */
134LIST_HEAD(ioc_list);
135 /* Callback lookup table */
136static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
137 /* Protocol driver class lookup table */
138static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
139 /* Event handler lookup table */
140static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Reset handler lookup table */
142static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
143static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144
145#ifdef CONFIG_PROC_FS
146static struct proc_dir_entry *mpt_proc_root_dir;
147#endif
148
149/*
150 * Driver Callback Index's
151 */
152static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
153static u8 last_drv_idx;
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*
157 * Forward protos...
158 */
159static irqreturn_t mpt_interrupt(int irq, void *bus_id);
160static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
161 MPT_FRAME_HDR *reply);
162static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
163 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
164 int sleepFlag);
165static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
166static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
167static void mpt_adapter_disable(MPT_ADAPTER *ioc);
168static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
169
170static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
171static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
172static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
173static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
174static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
175static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
176static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
177static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
178static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
179static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
181static int PrimeIocFifos(MPT_ADAPTER *ioc);
182static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
183static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int GetLanConfigPages(MPT_ADAPTER *ioc);
186static int GetIoUnitPage2(MPT_ADAPTER *ioc);
187int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
188static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
189static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
190static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
191static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
192static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
193static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
194 int sleepFlag);
195static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
196static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
197static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
198
199#ifdef CONFIG_PROC_FS
200static int mpt_summary_proc_show(struct seq_file *m, void *v);
201static int mpt_version_proc_show(struct seq_file *m, void *v);
202static int mpt_iocinfo_proc_show(struct seq_file *m, void *v);
203#endif
204static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
205
206static int ProcessEventNotification(MPT_ADAPTER *ioc,
207 EventNotificationReply_t *evReply, int *evHandlers);
208static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
209static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
210static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
212static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
213static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
214
215/* module entry point */
216static int __init fusion_init (void);
217static void __exit fusion_exit (void);
218
219#define CHIPREG_READ32(addr) readl_relaxed(addr)
220#define CHIPREG_READ32_dmasync(addr) readl(addr)
221#define CHIPREG_WRITE32(addr,val) writel(val, addr)
222#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
223#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
224
225static void
226pci_disable_io_access(struct pci_dev *pdev)
227{
228 u16 command_reg;
229
230 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
231 command_reg &= ~1;
232 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
233}
234
235static void
236pci_enable_io_access(struct pci_dev *pdev)
237{
238 u16 command_reg;
239
240 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
241 command_reg |= 1;
242 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
243}
244
245static int mpt_set_debug_level(const char *val, const struct kernel_param *kp)
246{
247 int ret = param_set_int(val, kp);
248 MPT_ADAPTER *ioc;
249
250 if (ret)
251 return ret;
252
253 list_for_each_entry(ioc, &ioc_list, list)
254 ioc->debug_level = mpt_debug_level;
255 return 0;
256}
257
258/**
259 * mpt_get_cb_idx - obtain cb_idx for registered driver
260 * @dclass: class driver enum
261 *
262 * Returns cb_idx, or zero means it wasn't found
263 **/
264static u8
265mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
266{
267 u8 cb_idx;
268
269 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
270 if (MptDriverClass[cb_idx] == dclass)
271 return cb_idx;
272 return 0;
273}
274
275/**
276 * mpt_is_discovery_complete - determine if discovery has completed
277 * @ioc: per adatper instance
278 *
279 * Returns 1 when discovery completed, else zero.
280 */
281static int
282mpt_is_discovery_complete(MPT_ADAPTER *ioc)
283{
284 ConfigExtendedPageHeader_t hdr;
285 CONFIGPARMS cfg;
286 SasIOUnitPage0_t *buffer;
287 dma_addr_t dma_handle;
288 int rc = 0;
289
290 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
291 memset(&cfg, 0, sizeof(CONFIGPARMS));
292 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
293 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
294 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
295 cfg.cfghdr.ehdr = &hdr;
296 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
297
298 if ((mpt_config(ioc, &cfg)))
299 goto out;
300 if (!hdr.ExtPageLength)
301 goto out;
302
303 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4,
304 &dma_handle, GFP_KERNEL);
305 if (!buffer)
306 goto out;
307
308 cfg.physAddr = dma_handle;
309 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
310
311 if ((mpt_config(ioc, &cfg)))
312 goto out_free_consistent;
313
314 if (!(buffer->PhyData[0].PortFlags &
315 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
316 rc = 1;
317
318 out_free_consistent:
319 dma_free_coherent(&ioc->pcidev->dev, hdr.ExtPageLength * 4, buffer,
320 dma_handle);
321 out:
322 return rc;
323}
324
325
326/**
327 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
328 * @arg: input argument, used to derive ioc
329 *
330 * Return 0 if controller is removed from pci subsystem.
331 * Return -1 for other case.
332 */
333static int mpt_remove_dead_ioc_func(void *arg)
334{
335 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
336 struct pci_dev *pdev;
337
338 if (!ioc)
339 return -1;
340
341 pdev = ioc->pcidev;
342 if (!pdev)
343 return -1;
344
345 pci_stop_and_remove_bus_device_locked(pdev);
346 return 0;
347}
348
349
350
351/**
352 * mpt_fault_reset_work - work performed on workq after ioc fault
353 * @work: input argument, used to derive ioc
354 *
355**/
356static void
357mpt_fault_reset_work(struct work_struct *work)
358{
359 MPT_ADAPTER *ioc =
360 container_of(work, MPT_ADAPTER, fault_reset_work.work);
361 u32 ioc_raw_state;
362 int rc;
363 unsigned long flags;
364 MPT_SCSI_HOST *hd;
365 struct task_struct *p;
366
367 if (ioc->ioc_reset_in_progress || !ioc->active)
368 goto out;
369
370
371 ioc_raw_state = mpt_GetIocState(ioc, 0);
372 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
373 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
374 ioc->name, __func__);
375
376 /*
377 * Call mptscsih_flush_pending_cmds callback so that we
378 * flush all pending commands back to OS.
379 * This call is required to aovid deadlock at block layer.
380 * Dead IOC will fail to do diag reset,and this call is safe
381 * since dead ioc will never return any command back from HW.
382 */
383 hd = shost_priv(ioc->sh);
384 ioc->schedule_dead_ioc_flush_running_cmds(hd);
385
386 /*Remove the Dead Host */
387 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
388 "mpt_dead_ioc_%d", ioc->id);
389 if (IS_ERR(p)) {
390 printk(MYIOC_s_ERR_FMT
391 "%s: Running mpt_dead_ioc thread failed !\n",
392 ioc->name, __func__);
393 } else {
394 printk(MYIOC_s_WARN_FMT
395 "%s: Running mpt_dead_ioc thread success !\n",
396 ioc->name, __func__);
397 }
398 return; /* don't rearm timer */
399 }
400
401 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
402 == MPI_IOC_STATE_FAULT) {
403 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
404 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
405 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
406 ioc->name, __func__);
407 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
408 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
409 __func__, (rc == 0) ? "success" : "failed");
410 ioc_raw_state = mpt_GetIocState(ioc, 0);
411 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
412 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
413 "reset (%04xh)\n", ioc->name, ioc_raw_state &
414 MPI_DOORBELL_DATA_MASK);
415 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
416 if ((mpt_is_discovery_complete(ioc))) {
417 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
418 "discovery_quiesce_io flag\n", ioc->name));
419 ioc->sas_discovery_quiesce_io = 0;
420 }
421 }
422
423 out:
424 /*
425 * Take turns polling alternate controller
426 */
427 if (ioc->alt_ioc)
428 ioc = ioc->alt_ioc;
429
430 /* rearm the timer */
431 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
432 if (ioc->reset_work_q)
433 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
434 msecs_to_jiffies(MPT_POLLING_INTERVAL));
435 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
436}
437
438
439/*
440 * Process turbo (context) reply...
441 */
442static void
443mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
444{
445 MPT_FRAME_HDR *mf = NULL;
446 MPT_FRAME_HDR *mr = NULL;
447 u16 req_idx = 0;
448 u8 cb_idx;
449
450 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
451 ioc->name, pa));
452
453 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
454 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
455 req_idx = pa & 0x0000FFFF;
456 cb_idx = (pa & 0x00FF0000) >> 16;
457 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
458 break;
459 case MPI_CONTEXT_REPLY_TYPE_LAN:
460 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
461 /*
462 * Blind set of mf to NULL here was fatal
463 * after lan_reply says "freeme"
464 * Fix sort of combined with an optimization here;
465 * added explicit check for case where lan_reply
466 * was just returning 1 and doing nothing else.
467 * For this case skip the callback, but set up
468 * proper mf value first here:-)
469 */
470 if ((pa & 0x58000000) == 0x58000000) {
471 req_idx = pa & 0x0000FFFF;
472 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
473 mpt_free_msg_frame(ioc, mf);
474 mb();
475 return;
476 }
477 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
478 break;
479 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
480 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
481 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
482 break;
483 default:
484 cb_idx = 0;
485 BUG();
486 }
487
488 /* Check for (valid) IO callback! */
489 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
490 MptCallbacks[cb_idx] == NULL) {
491 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
492 __func__, ioc->name, cb_idx);
493 goto out;
494 }
495
496 if (MptCallbacks[cb_idx](ioc, mf, mr))
497 mpt_free_msg_frame(ioc, mf);
498 out:
499 mb();
500}
501
502static void
503mpt_reply(MPT_ADAPTER *ioc, u32 pa)
504{
505 MPT_FRAME_HDR *mf;
506 MPT_FRAME_HDR *mr;
507 u16 req_idx;
508 u8 cb_idx;
509 int freeme;
510
511 u32 reply_dma_low;
512 u16 ioc_stat;
513
514 /* non-TURBO reply! Hmmm, something may be up...
515 * Newest turbo reply mechanism; get address
516 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
517 */
518
519 /* Map DMA address of reply header to cpu address.
520 * pa is 32 bits - but the dma address may be 32 or 64 bits
521 * get offset based only only the low addresses
522 */
523
524 reply_dma_low = (pa <<= 1);
525 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
526 (reply_dma_low - ioc->reply_frames_low_dma));
527
528 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
529 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
530 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
531
532 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
533 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
534 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
535
536 /* Check/log IOC log info
537 */
538 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
539 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
540 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
541 if (ioc->bus_type == FC)
542 mpt_fc_log_info(ioc, log_info);
543 else if (ioc->bus_type == SPI)
544 mpt_spi_log_info(ioc, log_info);
545 else if (ioc->bus_type == SAS)
546 mpt_sas_log_info(ioc, log_info, cb_idx);
547 }
548
549 if (ioc_stat & MPI_IOCSTATUS_MASK)
550 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
551
552 /* Check for (valid) IO callback! */
553 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
554 MptCallbacks[cb_idx] == NULL) {
555 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
556 __func__, ioc->name, cb_idx);
557 freeme = 0;
558 goto out;
559 }
560
561 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
562
563 out:
564 /* Flush (non-TURBO) reply with a WRITE! */
565 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
566
567 if (freeme)
568 mpt_free_msg_frame(ioc, mf);
569 mb();
570}
571
572/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
573/**
574 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
575 * @irq: irq number (not used)
576 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
577 *
578 * This routine is registered via the request_irq() kernel API call,
579 * and handles all interrupts generated from a specific MPT adapter
580 * (also referred to as a IO Controller or IOC).
581 * This routine must clear the interrupt from the adapter and does
582 * so by reading the reply FIFO. Multiple replies may be processed
583 * per single call to this routine.
584 *
585 * This routine handles register-level access of the adapter but
586 * dispatches (calls) a protocol-specific callback routine to handle
587 * the protocol-specific details of the MPT request completion.
588 */
589static irqreturn_t
590mpt_interrupt(int irq, void *bus_id)
591{
592 MPT_ADAPTER *ioc = bus_id;
593 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
594
595 if (pa == 0xFFFFFFFF)
596 return IRQ_NONE;
597
598 /*
599 * Drain the reply FIFO!
600 */
601 do {
602 if (pa & MPI_ADDRESS_REPLY_A_BIT)
603 mpt_reply(ioc, pa);
604 else
605 mpt_turbo_reply(ioc, pa);
606 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
607 } while (pa != 0xFFFFFFFF);
608
609 return IRQ_HANDLED;
610}
611
612/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
613/**
614 * mptbase_reply - MPT base driver's callback routine
615 * @ioc: Pointer to MPT_ADAPTER structure
616 * @req: Pointer to original MPT request frame
617 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
618 *
619 * MPT base driver's callback routine; all base driver
620 * "internal" request/reply processing is routed here.
621 * Currently used for EventNotification and EventAck handling.
622 *
623 * Returns 1 indicating original alloc'd request frame ptr
624 * should be freed, or 0 if it shouldn't.
625 */
626static int
627mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
628{
629 EventNotificationReply_t *pEventReply;
630 u8 event;
631 int evHandlers;
632 int freereq = 1;
633
634 switch (reply->u.hdr.Function) {
635 case MPI_FUNCTION_EVENT_NOTIFICATION:
636 pEventReply = (EventNotificationReply_t *)reply;
637 evHandlers = 0;
638 ProcessEventNotification(ioc, pEventReply, &evHandlers);
639 event = le32_to_cpu(pEventReply->Event) & 0xFF;
640 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
641 freereq = 0;
642 if (event != MPI_EVENT_EVENT_CHANGE)
643 break;
644 fallthrough;
645 case MPI_FUNCTION_CONFIG:
646 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
647 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
648 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
649 memcpy(ioc->mptbase_cmds.reply, reply,
650 min(MPT_DEFAULT_FRAME_SIZE,
651 4 * reply->u.reply.MsgLength));
652 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
653 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
654 complete(&ioc->mptbase_cmds.done);
655 } else
656 freereq = 0;
657 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
658 freereq = 1;
659 break;
660 case MPI_FUNCTION_EVENT_ACK:
661 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
662 "EventAck reply received\n", ioc->name));
663 break;
664 default:
665 printk(MYIOC_s_ERR_FMT
666 "Unexpected msg function (=%02Xh) reply received!\n",
667 ioc->name, reply->u.hdr.Function);
668 break;
669 }
670
671 /*
672 * Conditionally tell caller to free the original
673 * EventNotification/EventAck/unexpected request frame!
674 */
675 return freereq;
676}
677
678/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
679/**
680 * mpt_register - Register protocol-specific main callback handler.
681 * @cbfunc: callback function pointer
682 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
683 * @func_name: call function's name
684 *
685 * This routine is called by a protocol-specific driver (SCSI host,
686 * LAN, SCSI target) to register its reply callback routine. Each
687 * protocol-specific driver must do this before it will be able to
688 * use any IOC resources, such as obtaining request frames.
689 *
690 * NOTES: The SCSI protocol driver currently calls this routine thrice
691 * in order to register separate callbacks; one for "normal" SCSI IO;
692 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
693 *
694 * Returns u8 valued "handle" in the range (and S.O.D. order)
695 * {N,...,7,6,5,...,1} if successful.
696 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
697 * considered an error by the caller.
698 */
699u8
700mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
701{
702 u8 cb_idx;
703 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
704
705 /*
706 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
707 * (slot/handle 0 is reserved!)
708 */
709 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
710 if (MptCallbacks[cb_idx] == NULL) {
711 MptCallbacks[cb_idx] = cbfunc;
712 MptDriverClass[cb_idx] = dclass;
713 MptEvHandlers[cb_idx] = NULL;
714 last_drv_idx = cb_idx;
715 strscpy(MptCallbacksName[cb_idx], func_name,
716 MPT_MAX_CALLBACKNAME_LEN+1);
717 break;
718 }
719 }
720
721 return last_drv_idx;
722}
723
724/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
725/**
726 * mpt_deregister - Deregister a protocol drivers resources.
727 * @cb_idx: previously registered callback handle
728 *
729 * Each protocol-specific driver should call this routine when its
730 * module is unloaded.
731 */
732void
733mpt_deregister(u8 cb_idx)
734{
735 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
736 MptCallbacks[cb_idx] = NULL;
737 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
738 MptEvHandlers[cb_idx] = NULL;
739
740 last_drv_idx++;
741 }
742}
743
744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
745/**
746 * mpt_event_register - Register protocol-specific event callback handler.
747 * @cb_idx: previously registered (via mpt_register) callback handle
748 * @ev_cbfunc: callback function
749 *
750 * This routine can be called by one or more protocol-specific drivers
751 * if/when they choose to be notified of MPT events.
752 *
753 * Returns 0 for success.
754 */
755int
756mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
757{
758 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
759 return -1;
760
761 MptEvHandlers[cb_idx] = ev_cbfunc;
762 return 0;
763}
764
765/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
766/**
767 * mpt_event_deregister - Deregister protocol-specific event callback handler
768 * @cb_idx: previously registered callback handle
769 *
770 * Each protocol-specific driver should call this routine
771 * when it does not (or can no longer) handle events,
772 * or when its module is unloaded.
773 */
774void
775mpt_event_deregister(u8 cb_idx)
776{
777 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
778 return;
779
780 MptEvHandlers[cb_idx] = NULL;
781}
782
783/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
784/**
785 * mpt_reset_register - Register protocol-specific IOC reset handler.
786 * @cb_idx: previously registered (via mpt_register) callback handle
787 * @reset_func: reset function
788 *
789 * This routine can be called by one or more protocol-specific drivers
790 * if/when they choose to be notified of IOC resets.
791 *
792 * Returns 0 for success.
793 */
794int
795mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
796{
797 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
798 return -1;
799
800 MptResetHandlers[cb_idx] = reset_func;
801 return 0;
802}
803
804/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
805/**
806 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
807 * @cb_idx: previously registered callback handle
808 *
809 * Each protocol-specific driver should call this routine
810 * when it does not (or can no longer) handle IOC reset handling,
811 * or when its module is unloaded.
812 */
813void
814mpt_reset_deregister(u8 cb_idx)
815{
816 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
817 return;
818
819 MptResetHandlers[cb_idx] = NULL;
820}
821
822/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
823/**
824 * mpt_device_driver_register - Register device driver hooks
825 * @dd_cbfunc: driver callbacks struct
826 * @cb_idx: MPT protocol driver index
827 */
828int
829mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
830{
831 MPT_ADAPTER *ioc;
832
833 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
834 return -EINVAL;
835
836 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
837
838 /* call per pci device probe entry point */
839 list_for_each_entry(ioc, &ioc_list, list) {
840 if (dd_cbfunc->probe)
841 dd_cbfunc->probe(ioc->pcidev);
842 }
843
844 return 0;
845}
846
847/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
848/**
849 * mpt_device_driver_deregister - DeRegister device driver hooks
850 * @cb_idx: MPT protocol driver index
851 */
852void
853mpt_device_driver_deregister(u8 cb_idx)
854{
855 struct mpt_pci_driver *dd_cbfunc;
856 MPT_ADAPTER *ioc;
857
858 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
859 return;
860
861 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
862
863 list_for_each_entry(ioc, &ioc_list, list) {
864 if (dd_cbfunc->remove)
865 dd_cbfunc->remove(ioc->pcidev);
866 }
867
868 MptDeviceDriverHandlers[cb_idx] = NULL;
869}
870
871
872/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
873/**
874 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
875 * @cb_idx: Handle of registered MPT protocol driver
876 * @ioc: Pointer to MPT adapter structure
877 *
878 * Obtain an MPT request frame from the pool (of 1024) that are
879 * allocated per MPT adapter.
880 *
881 * Returns pointer to a MPT request frame or %NULL if none are available
882 * or IOC is not active.
883 */
884MPT_FRAME_HDR*
885mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
886{
887 MPT_FRAME_HDR *mf;
888 unsigned long flags;
889 u16 req_idx; /* Request index */
890
891 /* validate handle and ioc identifier */
892
893#ifdef MFCNT
894 if (!ioc->active)
895 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
896 "returning NULL!\n", ioc->name);
897#endif
898
899 /* If interrupts are not attached, do not return a request frame */
900 if (!ioc->active)
901 return NULL;
902
903 spin_lock_irqsave(&ioc->FreeQlock, flags);
904 if (!list_empty(&ioc->FreeQ)) {
905 int req_offset;
906
907 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
908 u.frame.linkage.list);
909 list_del(&mf->u.frame.linkage.list);
910 mf->u.frame.linkage.arg1 = 0;
911 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
912 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
913 /* u16! */
914 req_idx = req_offset / ioc->req_sz;
915 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
916 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
917 /* Default, will be changed if necessary in SG generation */
918 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
919#ifdef MFCNT
920 ioc->mfcnt++;
921#endif
922 }
923 else
924 mf = NULL;
925 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
926
927#ifdef MFCNT
928 if (mf == NULL)
929 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
930 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
931 ioc->req_depth);
932 mfcounter++;
933 if (mfcounter == PRINT_MF_COUNT)
934 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
935 ioc->mfcnt, ioc->req_depth);
936#endif
937
938 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
939 ioc->name, cb_idx, ioc->id, mf));
940 return mf;
941}
942
943/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
944/**
945 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
946 * @cb_idx: Handle of registered MPT protocol driver
947 * @ioc: Pointer to MPT adapter structure
948 * @mf: Pointer to MPT request frame
949 *
950 * This routine posts an MPT request frame to the request post FIFO of a
951 * specific MPT adapter.
952 */
953void
954mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
955{
956 u32 mf_dma_addr;
957 int req_offset;
958 u16 req_idx; /* Request index */
959
960 /* ensure values are reset properly! */
961 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
962 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
963 /* u16! */
964 req_idx = req_offset / ioc->req_sz;
965 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
966 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
967
968 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
969
970 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
971 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
972 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
973 ioc->RequestNB[req_idx]));
974 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
975}
976
977/**
978 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
979 * @cb_idx: Handle of registered MPT protocol driver
980 * @ioc: Pointer to MPT adapter structure
981 * @mf: Pointer to MPT request frame
982 *
983 * Send a protocol-specific MPT request frame to an IOC using
984 * hi-priority request queue.
985 *
986 * This routine posts an MPT request frame to the request post FIFO of a
987 * specific MPT adapter.
988 **/
989void
990mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
991{
992 u32 mf_dma_addr;
993 int req_offset;
994 u16 req_idx; /* Request index */
995
996 /* ensure values are reset properly! */
997 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
998 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
999 req_idx = req_offset / ioc->req_sz;
1000 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1001 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1002
1003 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1004
1005 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1006 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1007 ioc->name, mf_dma_addr, req_idx));
1008 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1009}
1010
1011/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1012/**
1013 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1014 * @ioc: Pointer to MPT adapter structure
1015 * @mf: Pointer to MPT request frame
1016 *
1017 * This routine places a MPT request frame back on the MPT adapter's
1018 * FreeQ.
1019 */
1020void
1021mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1022{
1023 unsigned long flags;
1024
1025 /* Put Request back on FreeQ! */
1026 spin_lock_irqsave(&ioc->FreeQlock, flags);
1027 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1028 goto out;
1029 /* signature to know if this mf is freed */
1030 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1031 list_add(&mf->u.frame.linkage.list, &ioc->FreeQ);
1032#ifdef MFCNT
1033 ioc->mfcnt--;
1034#endif
1035 out:
1036 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1037}
1038
1039/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1040/**
1041 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1042 * @pAddr: virtual address for SGE
1043 * @flagslength: SGE flags and data transfer length
1044 * @dma_addr: Physical address
1045 *
1046 * This routine places a MPT request frame back on the MPT adapter's
1047 * FreeQ.
1048 */
1049static void
1050mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1051{
1052 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1053 pSge->FlagsLength = cpu_to_le32(flagslength);
1054 pSge->Address = cpu_to_le32(dma_addr);
1055}
1056
1057/**
1058 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1059 * @pAddr: virtual address for SGE
1060 * @flagslength: SGE flags and data transfer length
1061 * @dma_addr: Physical address
1062 *
1063 * This routine places a MPT request frame back on the MPT adapter's
1064 * FreeQ.
1065 **/
1066static void
1067mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1068{
1069 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1070 pSge->Address.Low = cpu_to_le32
1071 (lower_32_bits(dma_addr));
1072 pSge->Address.High = cpu_to_le32
1073 (upper_32_bits(dma_addr));
1074 pSge->FlagsLength = cpu_to_le32
1075 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1076}
1077
1078/**
1079 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1080 * @pAddr: virtual address for SGE
1081 * @flagslength: SGE flags and data transfer length
1082 * @dma_addr: Physical address
1083 *
1084 * This routine places a MPT request frame back on the MPT adapter's
1085 * FreeQ.
1086 **/
1087static void
1088mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1089{
1090 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1091 u32 tmp;
1092
1093 pSge->Address.Low = cpu_to_le32
1094 (lower_32_bits(dma_addr));
1095 tmp = (u32)(upper_32_bits(dma_addr));
1096
1097 /*
1098 * 1078 errata workaround for the 36GB limitation
1099 */
1100 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1101 flagslength |=
1102 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1103 tmp |= (1<<31);
1104 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1105 printk(KERN_DEBUG "1078 P0M2 addressing for "
1106 "addr = 0x%llx len = %d\n",
1107 (unsigned long long)dma_addr,
1108 MPI_SGE_LENGTH(flagslength));
1109 }
1110
1111 pSge->Address.High = cpu_to_le32(tmp);
1112 pSge->FlagsLength = cpu_to_le32(
1113 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1114}
1115
1116/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1117/**
1118 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1119 * @pAddr: virtual address for SGE
1120 * @next: nextChainOffset value (u32's)
1121 * @length: length of next SGL segment
1122 * @dma_addr: Physical address
1123 *
1124 */
1125static void
1126mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1127{
1128 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1129
1130 pChain->Length = cpu_to_le16(length);
1131 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1132 pChain->NextChainOffset = next;
1133 pChain->Address = cpu_to_le32(dma_addr);
1134}
1135
1136/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1137/**
1138 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1139 * @pAddr: virtual address for SGE
1140 * @next: nextChainOffset value (u32's)
1141 * @length: length of next SGL segment
1142 * @dma_addr: Physical address
1143 *
1144 */
1145static void
1146mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1147{
1148 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1149 u32 tmp = dma_addr & 0xFFFFFFFF;
1150
1151 pChain->Length = cpu_to_le16(length);
1152 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1153 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1154
1155 pChain->NextChainOffset = next;
1156
1157 pChain->Address.Low = cpu_to_le32(tmp);
1158 tmp = (u32)(upper_32_bits(dma_addr));
1159 pChain->Address.High = cpu_to_le32(tmp);
1160}
1161
1162/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1163/**
1164 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1165 * @cb_idx: Handle of registered MPT protocol driver
1166 * @ioc: Pointer to MPT adapter structure
1167 * @reqBytes: Size of the request in bytes
1168 * @req: Pointer to MPT request frame
1169 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1170 *
1171 * This routine is used exclusively to send MptScsiTaskMgmt
1172 * requests since they are required to be sent via doorbell handshake.
1173 *
1174 * NOTE: It is the callers responsibility to byte-swap fields in the
1175 * request which are greater than 1 byte in size.
1176 *
1177 * Returns 0 for success, non-zero for failure.
1178 */
1179int
1180mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1181{
1182 int r = 0;
1183 u8 *req_as_bytes;
1184 int ii;
1185
1186 /* State is known to be good upon entering
1187 * this function so issue the bus reset
1188 * request.
1189 */
1190
1191 /*
1192 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1193 * setting cb_idx/req_idx. But ONLY if this request
1194 * is in proper (pre-alloc'd) request buffer range...
1195 */
1196 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1197 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1198 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1199 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1200 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1201 }
1202
1203 /* Make sure there are no doorbells */
1204 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1205
1206 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1207 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1208 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1209
1210 /* Wait for IOC doorbell int */
1211 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1212 return ii;
1213 }
1214
1215 /* Read doorbell and check for active bit */
1216 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1217 return -5;
1218
1219 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1220 ioc->name, ii));
1221
1222 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1223
1224 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1225 return -2;
1226 }
1227
1228 /* Send request via doorbell handshake */
1229 req_as_bytes = (u8 *) req;
1230 for (ii = 0; ii < reqBytes/4; ii++) {
1231 u32 word;
1232
1233 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1234 (req_as_bytes[(ii*4) + 1] << 8) |
1235 (req_as_bytes[(ii*4) + 2] << 16) |
1236 (req_as_bytes[(ii*4) + 3] << 24));
1237 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1238 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1239 r = -3;
1240 break;
1241 }
1242 }
1243
1244 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1245 r = 0;
1246 else
1247 r = -4;
1248
1249 /* Make sure there are no doorbells */
1250 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1251
1252 return r;
1253}
1254
1255/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1256/**
1257 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1258 * @ioc: Pointer to MPT adapter structure
1259 * @access_control_value: define bits below
1260 * @sleepFlag: Specifies whether the process can sleep
1261 *
1262 * Provides mechanism for the host driver to control the IOC's
1263 * Host Page Buffer access.
1264 *
1265 * Access Control Value - bits[15:12]
1266 * 0h Reserved
1267 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1268 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1269 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1270 *
1271 * Returns 0 for success, non-zero for failure.
1272 */
1273
1274static int
1275mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1276{
1277 /* return if in use */
1278 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1279 & MPI_DOORBELL_ACTIVE)
1280 return -1;
1281
1282 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1283
1284 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1285 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1286 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1287 (access_control_value<<12)));
1288
1289 /* Wait for IOC to clear Doorbell Status bit */
1290 if (WaitForDoorbellAck(ioc, 5, sleepFlag) < 0)
1291 return -2;
1292 else
1293 return 0;
1294}
1295
1296/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1297/**
1298 * mpt_host_page_alloc - allocate system memory for the fw
1299 * @ioc: Pointer to pointer to IOC adapter
1300 * @ioc_init: Pointer to ioc init config page
1301 *
1302 * If we already allocated memory in past, then resend the same pointer.
1303 * Returns 0 for success, non-zero for failure.
1304 */
1305static int
1306mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1307{
1308 char *psge;
1309 int flags_length;
1310 u32 host_page_buffer_sz=0;
1311
1312 if(!ioc->HostPageBuffer) {
1313
1314 host_page_buffer_sz =
1315 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1316
1317 if(!host_page_buffer_sz)
1318 return 0; /* fw doesn't need any host buffers */
1319
1320 /* spin till we get enough memory */
1321 while (host_page_buffer_sz > 0) {
1322 ioc->HostPageBuffer =
1323 dma_alloc_coherent(&ioc->pcidev->dev,
1324 host_page_buffer_sz,
1325 &ioc->HostPageBuffer_dma,
1326 GFP_KERNEL);
1327 if (ioc->HostPageBuffer) {
1328 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1329 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1330 ioc->name, ioc->HostPageBuffer,
1331 (u32)ioc->HostPageBuffer_dma,
1332 host_page_buffer_sz));
1333 ioc->alloc_total += host_page_buffer_sz;
1334 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1335 break;
1336 }
1337
1338 host_page_buffer_sz -= (4*1024);
1339 }
1340 }
1341
1342 if(!ioc->HostPageBuffer) {
1343 printk(MYIOC_s_ERR_FMT
1344 "Failed to alloc memory for host_page_buffer!\n",
1345 ioc->name);
1346 return -999;
1347 }
1348
1349 psge = (char *)&ioc_init->HostPageBufferSGE;
1350 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1351 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1352 MPI_SGE_FLAGS_HOST_TO_IOC |
1353 MPI_SGE_FLAGS_END_OF_BUFFER;
1354 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1355 flags_length |= ioc->HostPageBuffer_sz;
1356 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1357 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1358
1359 return 0;
1360}
1361
1362/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1363/**
1364 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1365 * @iocid: IOC unique identifier (integer)
1366 * @iocpp: Pointer to pointer to IOC adapter
1367 *
1368 * Given a unique IOC identifier, set pointer to the associated MPT
1369 * adapter structure.
1370 *
1371 * Returns iocid and sets iocpp if iocid is found.
1372 * Returns -1 if iocid is not found.
1373 */
1374int
1375mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1376{
1377 MPT_ADAPTER *ioc;
1378
1379 list_for_each_entry(ioc,&ioc_list,list) {
1380 if (ioc->id == iocid) {
1381 *iocpp =ioc;
1382 return iocid;
1383 }
1384 }
1385
1386 *iocpp = NULL;
1387 return -1;
1388}
1389
1390/**
1391 * mpt_get_product_name - returns product string
1392 * @vendor: pci vendor id
1393 * @device: pci device id
1394 * @revision: pci revision id
1395 *
1396 * Returns product string displayed when driver loads,
1397 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1398 *
1399 **/
1400static const char*
1401mpt_get_product_name(u16 vendor, u16 device, u8 revision)
1402{
1403 char *product_str = NULL;
1404
1405 if (vendor == PCI_VENDOR_ID_BROCADE) {
1406 switch (device)
1407 {
1408 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1409 switch (revision)
1410 {
1411 case 0x00:
1412 product_str = "BRE040 A0";
1413 break;
1414 case 0x01:
1415 product_str = "BRE040 A1";
1416 break;
1417 default:
1418 product_str = "BRE040";
1419 break;
1420 }
1421 break;
1422 }
1423 goto out;
1424 }
1425
1426 switch (device)
1427 {
1428 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1429 product_str = "LSIFC909 B1";
1430 break;
1431 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1432 product_str = "LSIFC919 B0";
1433 break;
1434 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1435 product_str = "LSIFC929 B0";
1436 break;
1437 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1438 if (revision < 0x80)
1439 product_str = "LSIFC919X A0";
1440 else
1441 product_str = "LSIFC919XL A1";
1442 break;
1443 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1444 if (revision < 0x80)
1445 product_str = "LSIFC929X A0";
1446 else
1447 product_str = "LSIFC929XL A1";
1448 break;
1449 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1450 product_str = "LSIFC939X A1";
1451 break;
1452 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1453 product_str = "LSIFC949X A1";
1454 break;
1455 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1456 switch (revision)
1457 {
1458 case 0x00:
1459 product_str = "LSIFC949E A0";
1460 break;
1461 case 0x01:
1462 product_str = "LSIFC949E A1";
1463 break;
1464 default:
1465 product_str = "LSIFC949E";
1466 break;
1467 }
1468 break;
1469 case MPI_MANUFACTPAGE_DEVID_53C1030:
1470 switch (revision)
1471 {
1472 case 0x00:
1473 product_str = "LSI53C1030 A0";
1474 break;
1475 case 0x01:
1476 product_str = "LSI53C1030 B0";
1477 break;
1478 case 0x03:
1479 product_str = "LSI53C1030 B1";
1480 break;
1481 case 0x07:
1482 product_str = "LSI53C1030 B2";
1483 break;
1484 case 0x08:
1485 product_str = "LSI53C1030 C0";
1486 break;
1487 case 0x80:
1488 product_str = "LSI53C1030T A0";
1489 break;
1490 case 0x83:
1491 product_str = "LSI53C1030T A2";
1492 break;
1493 case 0x87:
1494 product_str = "LSI53C1030T A3";
1495 break;
1496 case 0xc1:
1497 product_str = "LSI53C1020A A1";
1498 break;
1499 default:
1500 product_str = "LSI53C1030";
1501 break;
1502 }
1503 break;
1504 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1505 switch (revision)
1506 {
1507 case 0x03:
1508 product_str = "LSI53C1035 A2";
1509 break;
1510 case 0x04:
1511 product_str = "LSI53C1035 B0";
1512 break;
1513 default:
1514 product_str = "LSI53C1035";
1515 break;
1516 }
1517 break;
1518 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1519 switch (revision)
1520 {
1521 case 0x00:
1522 product_str = "LSISAS1064 A1";
1523 break;
1524 case 0x01:
1525 product_str = "LSISAS1064 A2";
1526 break;
1527 case 0x02:
1528 product_str = "LSISAS1064 A3";
1529 break;
1530 case 0x03:
1531 product_str = "LSISAS1064 A4";
1532 break;
1533 default:
1534 product_str = "LSISAS1064";
1535 break;
1536 }
1537 break;
1538 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1539 switch (revision)
1540 {
1541 case 0x00:
1542 product_str = "LSISAS1064E A0";
1543 break;
1544 case 0x01:
1545 product_str = "LSISAS1064E B0";
1546 break;
1547 case 0x02:
1548 product_str = "LSISAS1064E B1";
1549 break;
1550 case 0x04:
1551 product_str = "LSISAS1064E B2";
1552 break;
1553 case 0x08:
1554 product_str = "LSISAS1064E B3";
1555 break;
1556 default:
1557 product_str = "LSISAS1064E";
1558 break;
1559 }
1560 break;
1561 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1562 switch (revision)
1563 {
1564 case 0x00:
1565 product_str = "LSISAS1068 A0";
1566 break;
1567 case 0x01:
1568 product_str = "LSISAS1068 B0";
1569 break;
1570 case 0x02:
1571 product_str = "LSISAS1068 B1";
1572 break;
1573 default:
1574 product_str = "LSISAS1068";
1575 break;
1576 }
1577 break;
1578 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1579 switch (revision)
1580 {
1581 case 0x00:
1582 product_str = "LSISAS1068E A0";
1583 break;
1584 case 0x01:
1585 product_str = "LSISAS1068E B0";
1586 break;
1587 case 0x02:
1588 product_str = "LSISAS1068E B1";
1589 break;
1590 case 0x04:
1591 product_str = "LSISAS1068E B2";
1592 break;
1593 case 0x08:
1594 product_str = "LSISAS1068E B3";
1595 break;
1596 default:
1597 product_str = "LSISAS1068E";
1598 break;
1599 }
1600 break;
1601 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1602 switch (revision)
1603 {
1604 case 0x00:
1605 product_str = "LSISAS1078 A0";
1606 break;
1607 case 0x01:
1608 product_str = "LSISAS1078 B0";
1609 break;
1610 case 0x02:
1611 product_str = "LSISAS1078 C0";
1612 break;
1613 case 0x03:
1614 product_str = "LSISAS1078 C1";
1615 break;
1616 case 0x04:
1617 product_str = "LSISAS1078 C2";
1618 break;
1619 default:
1620 product_str = "LSISAS1078";
1621 break;
1622 }
1623 break;
1624 }
1625
1626 out:
1627 return product_str;
1628}
1629
1630/**
1631 * mpt_mapresources - map in memory mapped io
1632 * @ioc: Pointer to pointer to IOC adapter
1633 *
1634 **/
1635static int
1636mpt_mapresources(MPT_ADAPTER *ioc)
1637{
1638 u8 __iomem *mem;
1639 int ii;
1640 resource_size_t mem_phys;
1641 unsigned long port;
1642 u32 msize;
1643 u32 psize;
1644 int r = -ENODEV;
1645 struct pci_dev *pdev;
1646
1647 pdev = ioc->pcidev;
1648 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1649 if (pci_enable_device_mem(pdev)) {
1650 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1651 "failed\n", ioc->name);
1652 return r;
1653 }
1654 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1655 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1656 "MEM failed\n", ioc->name);
1657 goto out_pci_disable_device;
1658 }
1659
1660 if (sizeof(dma_addr_t) > 4) {
1661 const uint64_t required_mask = dma_get_required_mask
1662 (&pdev->dev);
1663 if (required_mask > DMA_BIT_MASK(32)
1664 && !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))
1665 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
1666 ioc->dma_mask = DMA_BIT_MASK(64);
1667 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1668 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1669 ioc->name));
1670 } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))
1671 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
1672 ioc->dma_mask = DMA_BIT_MASK(32);
1673 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1674 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1675 ioc->name));
1676 } else {
1677 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1678 ioc->name, pci_name(pdev));
1679 goto out_pci_release_region;
1680 }
1681 } else {
1682 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))
1683 && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
1684 ioc->dma_mask = DMA_BIT_MASK(32);
1685 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1686 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1687 ioc->name));
1688 } else {
1689 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1690 ioc->name, pci_name(pdev));
1691 goto out_pci_release_region;
1692 }
1693 }
1694
1695 mem_phys = msize = 0;
1696 port = psize = 0;
1697 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1698 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1699 if (psize)
1700 continue;
1701 /* Get I/O space! */
1702 port = pci_resource_start(pdev, ii);
1703 psize = pci_resource_len(pdev, ii);
1704 } else {
1705 if (msize)
1706 continue;
1707 /* Get memmap */
1708 mem_phys = pci_resource_start(pdev, ii);
1709 msize = pci_resource_len(pdev, ii);
1710 }
1711 }
1712 ioc->mem_size = msize;
1713
1714 mem = NULL;
1715 /* Get logical ptr for PciMem0 space */
1716 /*mem = ioremap(mem_phys, msize);*/
1717 mem = ioremap(mem_phys, msize);
1718 if (mem == NULL) {
1719 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1720 " memory!\n", ioc->name);
1721 r = -EINVAL;
1722 goto out_pci_release_region;
1723 }
1724 ioc->memmap = mem;
1725 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1726 ioc->name, mem, (unsigned long long)mem_phys));
1727
1728 ioc->mem_phys = mem_phys;
1729 ioc->chip = (SYSIF_REGS __iomem *)mem;
1730
1731 /* Save Port IO values in case we need to do downloadboot */
1732 ioc->pio_mem_phys = port;
1733 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1734
1735 return 0;
1736
1737out_pci_release_region:
1738 pci_release_selected_regions(pdev, ioc->bars);
1739out_pci_disable_device:
1740 pci_disable_device(pdev);
1741 return r;
1742}
1743
1744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1745/**
1746 * mpt_attach - Install a PCI intelligent MPT adapter.
1747 * @pdev: Pointer to pci_dev structure
1748 * @id: PCI device ID information
1749 *
1750 * This routine performs all the steps necessary to bring the IOC of
1751 * a MPT adapter to a OPERATIONAL state. This includes registering
1752 * memory regions, registering the interrupt, and allocating request
1753 * and reply memory pools.
1754 *
1755 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1756 * MPT adapter.
1757 *
1758 * Returns 0 for success, non-zero for failure.
1759 *
1760 * TODO: Add support for polled controllers
1761 */
1762int
1763mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1764{
1765 MPT_ADAPTER *ioc;
1766 u8 cb_idx;
1767 int r = -ENODEV;
1768 u8 pcixcmd;
1769 static int mpt_ids = 0;
1770#ifdef CONFIG_PROC_FS
1771 struct proc_dir_entry *dent;
1772#endif
1773
1774 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_KERNEL);
1775 if (ioc == NULL) {
1776 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1777 return -ENOMEM;
1778 }
1779
1780 ioc->id = mpt_ids++;
1781 sprintf(ioc->name, "ioc%d", ioc->id);
1782 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1783
1784 /*
1785 * set initial debug level
1786 * (refer to mptdebug.h)
1787 *
1788 */
1789 ioc->debug_level = mpt_debug_level;
1790 if (mpt_debug_level)
1791 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1792
1793 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1794
1795 ioc->pcidev = pdev;
1796 if (mpt_mapresources(ioc)) {
1797 goto out_free_ioc;
1798 }
1799
1800 /*
1801 * Setting up proper handlers for scatter gather handling
1802 */
1803 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1804 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1805 ioc->add_sge = &mpt_add_sge_64bit_1078;
1806 else
1807 ioc->add_sge = &mpt_add_sge_64bit;
1808 ioc->add_chain = &mpt_add_chain_64bit;
1809 ioc->sg_addr_size = 8;
1810 } else {
1811 ioc->add_sge = &mpt_add_sge;
1812 ioc->add_chain = &mpt_add_chain;
1813 ioc->sg_addr_size = 4;
1814 }
1815 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1816
1817 ioc->alloc_total = sizeof(MPT_ADAPTER);
1818 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1819 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1820
1821
1822 spin_lock_init(&ioc->taskmgmt_lock);
1823 mutex_init(&ioc->internal_cmds.mutex);
1824 init_completion(&ioc->internal_cmds.done);
1825 mutex_init(&ioc->mptbase_cmds.mutex);
1826 init_completion(&ioc->mptbase_cmds.done);
1827 mutex_init(&ioc->taskmgmt_cmds.mutex);
1828 init_completion(&ioc->taskmgmt_cmds.done);
1829
1830 /* Initialize the event logging.
1831 */
1832 ioc->eventTypes = 0; /* None */
1833 ioc->eventContext = 0;
1834 ioc->eventLogSize = 0;
1835 ioc->events = NULL;
1836
1837#ifdef MFCNT
1838 ioc->mfcnt = 0;
1839#endif
1840
1841 ioc->sh = NULL;
1842 ioc->cached_fw = NULL;
1843
1844 /* Initialize SCSI Config Data structure
1845 */
1846 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1847
1848 /* Initialize the fc rport list head.
1849 */
1850 INIT_LIST_HEAD(&ioc->fc_rports);
1851
1852 /* Find lookup slot. */
1853 INIT_LIST_HEAD(&ioc->list);
1854
1855
1856 /* Initialize workqueue */
1857 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1858
1859 ioc->reset_work_q =
1860 alloc_workqueue("mpt_poll_%d", WQ_MEM_RECLAIM, 0, ioc->id);
1861 if (!ioc->reset_work_q) {
1862 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1863 ioc->name);
1864 r = -ENOMEM;
1865 goto out_unmap_resources;
1866 }
1867
1868 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1869 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1870
1871 ioc->prod_name = mpt_get_product_name(pdev->vendor, pdev->device,
1872 pdev->revision);
1873
1874 switch (pdev->device)
1875 {
1876 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1877 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1878 ioc->errata_flag_1064 = 1;
1879 fallthrough;
1880 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1881 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1882 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1883 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1884 ioc->bus_type = FC;
1885 break;
1886
1887 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1888 if (pdev->revision < XL_929) {
1889 /* 929X Chip Fix. Set Split transactions level
1890 * for PCIX. Set MOST bits to zero.
1891 */
1892 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1893 pcixcmd &= 0x8F;
1894 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1895 } else {
1896 /* 929XL Chip Fix. Set MMRBC to 0x08.
1897 */
1898 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1899 pcixcmd |= 0x08;
1900 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1901 }
1902 ioc->bus_type = FC;
1903 break;
1904
1905 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1906 /* 919X Chip Fix. Set Split transactions level
1907 * for PCIX. Set MOST bits to zero.
1908 */
1909 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1910 pcixcmd &= 0x8F;
1911 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1912 ioc->bus_type = FC;
1913 break;
1914
1915 case MPI_MANUFACTPAGE_DEVID_53C1030:
1916 /* 1030 Chip Fix. Disable Split transactions
1917 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1918 */
1919 if (pdev->revision < C0_1030) {
1920 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1921 pcixcmd &= 0x8F;
1922 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1923 }
1924 fallthrough;
1925
1926 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1927 ioc->bus_type = SPI;
1928 break;
1929
1930 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1931 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1932 ioc->errata_flag_1064 = 1;
1933 ioc->bus_type = SAS;
1934 break;
1935
1936 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1937 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1938 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1939 ioc->bus_type = SAS;
1940 break;
1941 }
1942
1943
1944 switch (ioc->bus_type) {
1945
1946 case SAS:
1947 ioc->msi_enable = mpt_msi_enable_sas;
1948 break;
1949
1950 case SPI:
1951 ioc->msi_enable = mpt_msi_enable_spi;
1952 break;
1953
1954 case FC:
1955 ioc->msi_enable = mpt_msi_enable_fc;
1956 break;
1957
1958 default:
1959 ioc->msi_enable = 0;
1960 break;
1961 }
1962
1963 ioc->fw_events_off = 1;
1964
1965 if (ioc->errata_flag_1064)
1966 pci_disable_io_access(pdev);
1967
1968 spin_lock_init(&ioc->FreeQlock);
1969
1970 /* Disable all! */
1971 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1972 ioc->active = 0;
1973 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1974
1975 /* Set IOC ptr in the pcidev's driver data. */
1976 pci_set_drvdata(ioc->pcidev, ioc);
1977
1978 /* Set lookup ptr. */
1979 list_add_tail(&ioc->list, &ioc_list);
1980
1981 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1982 */
1983 mpt_detect_bound_ports(ioc, pdev);
1984
1985 INIT_LIST_HEAD(&ioc->fw_event_list);
1986 spin_lock_init(&ioc->fw_event_lock);
1987 ioc->fw_event_q = alloc_workqueue("mpt/%d", WQ_MEM_RECLAIM, 0, ioc->id);
1988 if (!ioc->fw_event_q) {
1989 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1990 ioc->name);
1991 r = -ENOMEM;
1992 goto out_remove_ioc;
1993 }
1994
1995 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
1996 CAN_SLEEP)) != 0){
1997 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
1998 ioc->name, r);
1999
2000 destroy_workqueue(ioc->fw_event_q);
2001 ioc->fw_event_q = NULL;
2002
2003 list_del(&ioc->list);
2004 if (ioc->alt_ioc)
2005 ioc->alt_ioc->alt_ioc = NULL;
2006 iounmap(ioc->memmap);
2007 if (pci_is_enabled(pdev))
2008 pci_disable_device(pdev);
2009 if (r != -5)
2010 pci_release_selected_regions(pdev, ioc->bars);
2011
2012 destroy_workqueue(ioc->reset_work_q);
2013 ioc->reset_work_q = NULL;
2014
2015 kfree(ioc);
2016 return r;
2017 }
2018
2019 /* call per device driver probe entry point */
2020 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2021 if(MptDeviceDriverHandlers[cb_idx] &&
2022 MptDeviceDriverHandlers[cb_idx]->probe) {
2023 MptDeviceDriverHandlers[cb_idx]->probe(pdev);
2024 }
2025 }
2026
2027#ifdef CONFIG_PROC_FS
2028 /*
2029 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2030 */
2031 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2032 if (dent) {
2033 proc_create_single_data("info", S_IRUGO, dent,
2034 mpt_iocinfo_proc_show, ioc);
2035 proc_create_single_data("summary", S_IRUGO, dent,
2036 mpt_summary_proc_show, ioc);
2037 }
2038#endif
2039
2040 if (!ioc->alt_ioc)
2041 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2042 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2043
2044 return 0;
2045
2046out_remove_ioc:
2047 list_del(&ioc->list);
2048 if (ioc->alt_ioc)
2049 ioc->alt_ioc->alt_ioc = NULL;
2050
2051 destroy_workqueue(ioc->reset_work_q);
2052 ioc->reset_work_q = NULL;
2053
2054out_unmap_resources:
2055 iounmap(ioc->memmap);
2056 pci_disable_device(pdev);
2057 pci_release_selected_regions(pdev, ioc->bars);
2058
2059out_free_ioc:
2060 kfree(ioc);
2061
2062 return r;
2063}
2064
2065/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2066/**
2067 * mpt_detach - Remove a PCI intelligent MPT adapter.
2068 * @pdev: Pointer to pci_dev structure
2069 */
2070
2071void
2072mpt_detach(struct pci_dev *pdev)
2073{
2074 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2075 char pname[64];
2076 u8 cb_idx;
2077 unsigned long flags;
2078 struct workqueue_struct *wq;
2079
2080 /*
2081 * Stop polling ioc for fault condition
2082 */
2083 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2084 wq = ioc->reset_work_q;
2085 ioc->reset_work_q = NULL;
2086 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2087 cancel_delayed_work(&ioc->fault_reset_work);
2088 destroy_workqueue(wq);
2089
2090 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2091 wq = ioc->fw_event_q;
2092 ioc->fw_event_q = NULL;
2093 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2094 destroy_workqueue(wq);
2095
2096 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2097 remove_proc_entry(pname, NULL);
2098 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2099 remove_proc_entry(pname, NULL);
2100 snprintf(pname, sizeof(pname), MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2101 remove_proc_entry(pname, NULL);
2102
2103 /* call per device driver remove entry point */
2104 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2105 if(MptDeviceDriverHandlers[cb_idx] &&
2106 MptDeviceDriverHandlers[cb_idx]->remove) {
2107 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2108 }
2109 }
2110
2111 /* Disable interrupts! */
2112 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2113
2114 ioc->active = 0;
2115 synchronize_irq(pdev->irq);
2116
2117 /* Clear any lingering interrupt */
2118 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2119
2120 CHIPREG_READ32(&ioc->chip->IntStatus);
2121
2122 mpt_adapter_dispose(ioc);
2123
2124}
2125
2126/**************************************************************************
2127 * Power Management
2128 */
2129#ifdef CONFIG_PM
2130/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2131/**
2132 * mpt_suspend - Fusion MPT base driver suspend routine.
2133 * @pdev: Pointer to pci_dev structure
2134 * @state: new state to enter
2135 */
2136int
2137mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2138{
2139 u32 device_state;
2140 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2141
2142 device_state = pci_choose_state(pdev, state);
2143 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2144 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2145 device_state);
2146
2147 /* put ioc into READY_STATE */
2148 if (SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2149 printk(MYIOC_s_ERR_FMT
2150 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2151 }
2152
2153 /* disable interrupts */
2154 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2155 ioc->active = 0;
2156
2157 /* Clear any lingering interrupt */
2158 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2159
2160 free_irq(ioc->pci_irq, ioc);
2161 if (ioc->msi_enable)
2162 pci_disable_msi(ioc->pcidev);
2163 ioc->pci_irq = -1;
2164 pci_save_state(pdev);
2165 pci_disable_device(pdev);
2166 pci_release_selected_regions(pdev, ioc->bars);
2167 pci_set_power_state(pdev, device_state);
2168 return 0;
2169}
2170
2171/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2172/**
2173 * mpt_resume - Fusion MPT base driver resume routine.
2174 * @pdev: Pointer to pci_dev structure
2175 */
2176int
2177mpt_resume(struct pci_dev *pdev)
2178{
2179 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2180 u32 device_state = pdev->current_state;
2181 int recovery_state;
2182 int err;
2183
2184 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2185 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2186 device_state);
2187
2188 pci_set_power_state(pdev, PCI_D0);
2189 pci_enable_wake(pdev, PCI_D0, 0);
2190 pci_restore_state(pdev);
2191 ioc->pcidev = pdev;
2192 err = mpt_mapresources(ioc);
2193 if (err)
2194 return err;
2195
2196 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2197 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2198 ioc->add_sge = &mpt_add_sge_64bit_1078;
2199 else
2200 ioc->add_sge = &mpt_add_sge_64bit;
2201 ioc->add_chain = &mpt_add_chain_64bit;
2202 ioc->sg_addr_size = 8;
2203 } else {
2204
2205 ioc->add_sge = &mpt_add_sge;
2206 ioc->add_chain = &mpt_add_chain;
2207 ioc->sg_addr_size = 4;
2208 }
2209 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2210
2211 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2212 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2213 CHIPREG_READ32(&ioc->chip->Doorbell));
2214
2215 /*
2216 * Errata workaround for SAS pci express:
2217 * Upon returning to the D0 state, the contents of the doorbell will be
2218 * stale data, and this will incorrectly signal to the host driver that
2219 * the firmware is ready to process mpt commands. The workaround is
2220 * to issue a diagnostic reset.
2221 */
2222 if (ioc->bus_type == SAS && (pdev->device ==
2223 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2224 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2225 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2226 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2227 ioc->name);
2228 goto out;
2229 }
2230 }
2231
2232 /* bring ioc to operational state */
2233 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2234 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2235 CAN_SLEEP);
2236 if (recovery_state != 0)
2237 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2238 "error:[%x]\n", ioc->name, recovery_state);
2239 else
2240 printk(MYIOC_s_INFO_FMT
2241 "pci-resume: success\n", ioc->name);
2242 out:
2243 return 0;
2244
2245}
2246#endif
2247
2248static int
2249mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2250{
2251 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2252 ioc->bus_type != SPI) ||
2253 (MptDriverClass[index] == MPTFC_DRIVER &&
2254 ioc->bus_type != FC) ||
2255 (MptDriverClass[index] == MPTSAS_DRIVER &&
2256 ioc->bus_type != SAS))
2257 /* make sure we only call the relevant reset handler
2258 * for the bus */
2259 return 0;
2260 return (MptResetHandlers[index])(ioc, reset_phase);
2261}
2262
2263/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2264/**
2265 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2266 * @ioc: Pointer to MPT adapter structure
2267 * @reason: Event word / reason
2268 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2269 *
2270 * This routine performs all the steps necessary to bring the IOC
2271 * to a OPERATIONAL state.
2272 *
2273 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2274 * MPT adapter.
2275 *
2276 * Returns:
2277 * 0 for success
2278 * -1 if failed to get board READY
2279 * -2 if READY but IOCFacts Failed
2280 * -3 if READY but PrimeIOCFifos Failed
2281 * -4 if READY but IOCInit Failed
2282 * -5 if failed to enable_device and/or request_selected_regions
2283 * -6 if failed to upload firmware
2284 */
2285static int
2286mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2287{
2288 int hard_reset_done = 0;
2289 int alt_ioc_ready = 0;
2290 int hard;
2291 int rc=0;
2292 int ii;
2293 int ret = 0;
2294 int reset_alt_ioc_active = 0;
2295 int irq_allocated = 0;
2296 u8 *a;
2297
2298 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2299 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2300
2301 /* Disable reply interrupts (also blocks FreeQ) */
2302 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2303 ioc->active = 0;
2304
2305 if (ioc->alt_ioc) {
2306 if (ioc->alt_ioc->active ||
2307 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2308 reset_alt_ioc_active = 1;
2309 /* Disable alt-IOC's reply interrupts
2310 * (and FreeQ) for a bit
2311 **/
2312 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2313 0xFFFFFFFF);
2314 ioc->alt_ioc->active = 0;
2315 }
2316 }
2317
2318 hard = 1;
2319 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2320 hard = 0;
2321
2322 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2323 if (hard_reset_done == -4) {
2324 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2325 ioc->name);
2326
2327 if (reset_alt_ioc_active && ioc->alt_ioc) {
2328 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2329 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2330 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2331 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2332 ioc->alt_ioc->active = 1;
2333 }
2334
2335 } else {
2336 printk(MYIOC_s_WARN_FMT
2337 "NOT READY WARNING!\n", ioc->name);
2338 }
2339 ret = -1;
2340 goto out;
2341 }
2342
2343 /* hard_reset_done = 0 if a soft reset was performed
2344 * and 1 if a hard reset was performed.
2345 */
2346 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2347 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2348 alt_ioc_ready = 1;
2349 else
2350 printk(MYIOC_s_WARN_FMT
2351 ": alt-ioc Not ready WARNING!\n",
2352 ioc->alt_ioc->name);
2353 }
2354
2355 for (ii=0; ii<5; ii++) {
2356 /* Get IOC facts! Allow 5 retries */
2357 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2358 break;
2359 }
2360
2361
2362 if (ii == 5) {
2363 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2364 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2365 ret = -2;
2366 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2367 MptDisplayIocCapabilities(ioc);
2368 }
2369
2370 if (alt_ioc_ready) {
2371 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2372 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2373 "Initial Alt IocFacts failed rc=%x\n",
2374 ioc->name, rc));
2375 /* Retry - alt IOC was initialized once
2376 */
2377 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2378 }
2379 if (rc) {
2380 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2381 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2382 alt_ioc_ready = 0;
2383 reset_alt_ioc_active = 0;
2384 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2385 MptDisplayIocCapabilities(ioc->alt_ioc);
2386 }
2387 }
2388
2389 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2390 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2391 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2392 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2393 IORESOURCE_IO);
2394 if (pci_enable_device(ioc->pcidev))
2395 return -5;
2396 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2397 "mpt"))
2398 return -5;
2399 }
2400
2401 /*
2402 * Device is reset now. It must have de-asserted the interrupt line
2403 * (if it was asserted) and it should be safe to register for the
2404 * interrupt now.
2405 */
2406 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2407 ioc->pci_irq = -1;
2408 if (ioc->pcidev->irq) {
2409 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2410 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2411 ioc->name);
2412 else
2413 ioc->msi_enable = 0;
2414 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2415 IRQF_SHARED, ioc->name, ioc);
2416 if (rc < 0) {
2417 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2418 "interrupt %d!\n",
2419 ioc->name, ioc->pcidev->irq);
2420 if (ioc->msi_enable)
2421 pci_disable_msi(ioc->pcidev);
2422 ret = -EBUSY;
2423 goto out;
2424 }
2425 irq_allocated = 1;
2426 ioc->pci_irq = ioc->pcidev->irq;
2427 pci_set_master(ioc->pcidev); /* ?? */
2428 pci_set_drvdata(ioc->pcidev, ioc);
2429 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2430 "installed at interrupt %d\n", ioc->name,
2431 ioc->pcidev->irq));
2432 }
2433 }
2434
2435 /* Prime reply & request queues!
2436 * (mucho alloc's) Must be done prior to
2437 * init as upper addresses are needed for init.
2438 * If fails, continue with alt-ioc processing
2439 */
2440 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2441 ioc->name));
2442 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2443 ret = -3;
2444
2445 /* May need to check/upload firmware & data here!
2446 * If fails, continue with alt-ioc processing
2447 */
2448 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2449 ioc->name));
2450 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2451 ret = -4;
2452// NEW!
2453 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2454 printk(MYIOC_s_WARN_FMT
2455 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2456 ioc->alt_ioc->name, rc);
2457 alt_ioc_ready = 0;
2458 reset_alt_ioc_active = 0;
2459 }
2460
2461 if (alt_ioc_ready) {
2462 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2463 alt_ioc_ready = 0;
2464 reset_alt_ioc_active = 0;
2465 printk(MYIOC_s_WARN_FMT
2466 ": alt-ioc: (%d) init failure WARNING!\n",
2467 ioc->alt_ioc->name, rc);
2468 }
2469 }
2470
2471 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2472 if (ioc->upload_fw) {
2473 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2474 "firmware upload required!\n", ioc->name));
2475
2476 /* Controller is not operational, cannot do upload
2477 */
2478 if (ret == 0) {
2479 rc = mpt_do_upload(ioc, sleepFlag);
2480 if (rc == 0) {
2481 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2482 /*
2483 * Maintain only one pointer to FW memory
2484 * so there will not be two attempt to
2485 * downloadboot onboard dual function
2486 * chips (mpt_adapter_disable,
2487 * mpt_diag_reset)
2488 */
2489 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2490 "mpt_upload: alt_%s has cached_fw=%p \n",
2491 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2492 ioc->cached_fw = NULL;
2493 }
2494 } else {
2495 printk(MYIOC_s_WARN_FMT
2496 "firmware upload failure!\n", ioc->name);
2497 ret = -6;
2498 }
2499 }
2500 }
2501 }
2502
2503 /* Enable MPT base driver management of EventNotification
2504 * and EventAck handling.
2505 */
2506 if ((ret == 0) && (!ioc->facts.EventState)) {
2507 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2508 "SendEventNotification\n",
2509 ioc->name));
2510 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2511 }
2512
2513 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2514 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2515
2516 if (ret == 0) {
2517 /* Enable! (reply interrupt) */
2518 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2519 ioc->active = 1;
2520 }
2521 if (rc == 0) { /* alt ioc */
2522 if (reset_alt_ioc_active && ioc->alt_ioc) {
2523 /* (re)Enable alt-IOC! (reply interrupt) */
2524 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2525 "reply irq re-enabled\n",
2526 ioc->alt_ioc->name));
2527 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2528 MPI_HIM_DIM);
2529 ioc->alt_ioc->active = 1;
2530 }
2531 }
2532
2533
2534 /* Add additional "reason" check before call to GetLanConfigPages
2535 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2536 * recursive scenario; GetLanConfigPages times out, timer expired
2537 * routine calls HardResetHandler, which calls into here again,
2538 * and we try GetLanConfigPages again...
2539 */
2540 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2541
2542 /*
2543 * Initialize link list for inactive raid volumes.
2544 */
2545 mutex_init(&ioc->raid_data.inactive_list_mutex);
2546 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2547
2548 switch (ioc->bus_type) {
2549
2550 case SAS:
2551 /* clear persistency table */
2552 if(ioc->facts.IOCExceptions &
2553 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2554 ret = mptbase_sas_persist_operation(ioc,
2555 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2556 if(ret != 0)
2557 goto out;
2558 }
2559
2560 /* Find IM volumes
2561 */
2562 mpt_findImVolumes(ioc);
2563
2564 /* Check, and possibly reset, the coalescing value
2565 */
2566 mpt_read_ioc_pg_1(ioc);
2567
2568 break;
2569
2570 case FC:
2571 if ((ioc->pfacts[0].ProtocolFlags &
2572 MPI_PORTFACTS_PROTOCOL_LAN) &&
2573 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2574 /*
2575 * Pre-fetch the ports LAN MAC address!
2576 * (LANPage1_t stuff)
2577 */
2578 (void) GetLanConfigPages(ioc);
2579 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2580 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2581 "LanAddr = %pMR\n", ioc->name, a));
2582 }
2583 break;
2584
2585 case SPI:
2586 /* Get NVRAM and adapter maximums from SPP 0 and 2
2587 */
2588 mpt_GetScsiPortSettings(ioc, 0);
2589
2590 /* Get version and length of SDP 1
2591 */
2592 mpt_readScsiDevicePageHeaders(ioc, 0);
2593
2594 /* Find IM volumes
2595 */
2596 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2597 mpt_findImVolumes(ioc);
2598
2599 /* Check, and possibly reset, the coalescing value
2600 */
2601 mpt_read_ioc_pg_1(ioc);
2602
2603 mpt_read_ioc_pg_4(ioc);
2604
2605 break;
2606 }
2607
2608 GetIoUnitPage2(ioc);
2609 mpt_get_manufacturing_pg_0(ioc);
2610 }
2611
2612 out:
2613 if ((ret != 0) && irq_allocated) {
2614 free_irq(ioc->pci_irq, ioc);
2615 if (ioc->msi_enable)
2616 pci_disable_msi(ioc->pcidev);
2617 }
2618 return ret;
2619}
2620
2621/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2622/**
2623 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2624 * @ioc: Pointer to MPT adapter structure
2625 * @pdev: Pointer to (struct pci_dev) structure
2626 *
2627 * Search for PCI bus/dev_function which matches
2628 * PCI bus/dev_function (+/-1) for newly discovered 929,
2629 * 929X, 1030 or 1035.
2630 *
2631 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2632 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2633 */
2634static void
2635mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2636{
2637 struct pci_dev *peer=NULL;
2638 unsigned int slot = PCI_SLOT(pdev->devfn);
2639 unsigned int func = PCI_FUNC(pdev->devfn);
2640 MPT_ADAPTER *ioc_srch;
2641
2642 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2643 " searching for devfn match on %x or %x\n",
2644 ioc->name, pci_name(pdev), pdev->bus->number,
2645 pdev->devfn, func-1, func+1));
2646
2647 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2648 if (!peer) {
2649 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2650 if (!peer)
2651 return;
2652 }
2653
2654 list_for_each_entry(ioc_srch, &ioc_list, list) {
2655 struct pci_dev *_pcidev = ioc_srch->pcidev;
2656 if (_pcidev == peer) {
2657 /* Paranoia checks */
2658 if (ioc->alt_ioc != NULL) {
2659 printk(MYIOC_s_WARN_FMT
2660 "Oops, already bound (%s <==> %s)!\n",
2661 ioc->name, ioc->name, ioc->alt_ioc->name);
2662 break;
2663 } else if (ioc_srch->alt_ioc != NULL) {
2664 printk(MYIOC_s_WARN_FMT
2665 "Oops, already bound (%s <==> %s)!\n",
2666 ioc_srch->name, ioc_srch->name,
2667 ioc_srch->alt_ioc->name);
2668 break;
2669 }
2670 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2671 "FOUND! binding %s <==> %s\n",
2672 ioc->name, ioc->name, ioc_srch->name));
2673 ioc_srch->alt_ioc = ioc;
2674 ioc->alt_ioc = ioc_srch;
2675 }
2676 }
2677 pci_dev_put(peer);
2678}
2679
2680/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2681/**
2682 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2683 * @ioc: Pointer to MPT adapter structure
2684 */
2685static void
2686mpt_adapter_disable(MPT_ADAPTER *ioc)
2687{
2688 int sz;
2689 int ret;
2690
2691 if (ioc->cached_fw != NULL) {
2692 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2693 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2694 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2695 ioc->cached_fw, CAN_SLEEP)) < 0) {
2696 printk(MYIOC_s_WARN_FMT
2697 ": firmware downloadboot failure (%d)!\n",
2698 ioc->name, ret);
2699 }
2700 }
2701
2702 /*
2703 * Put the controller into ready state (if its not already)
2704 */
2705 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2706 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2707 CAN_SLEEP)) {
2708 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2709 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2710 "reset failed to put ioc in ready state!\n",
2711 ioc->name, __func__);
2712 } else
2713 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2714 "failed!\n", ioc->name, __func__);
2715 }
2716
2717
2718 /* Disable adapter interrupts! */
2719 synchronize_irq(ioc->pcidev->irq);
2720 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2721 ioc->active = 0;
2722
2723 /* Clear any lingering interrupt */
2724 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2725 CHIPREG_READ32(&ioc->chip->IntStatus);
2726
2727 if (ioc->alloc != NULL) {
2728 sz = ioc->alloc_sz;
2729 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2730 ioc->name, ioc->alloc, ioc->alloc_sz));
2731 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
2732 ioc->alloc_dma);
2733 ioc->reply_frames = NULL;
2734 ioc->req_frames = NULL;
2735 ioc->alloc = NULL;
2736 ioc->alloc_total -= sz;
2737 }
2738
2739 if (ioc->sense_buf_pool != NULL) {
2740 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2741 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
2742 ioc->sense_buf_pool_dma);
2743 ioc->sense_buf_pool = NULL;
2744 ioc->alloc_total -= sz;
2745 }
2746
2747 if (ioc->events != NULL){
2748 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2749 kfree(ioc->events);
2750 ioc->events = NULL;
2751 ioc->alloc_total -= sz;
2752 }
2753
2754 mpt_free_fw_memory(ioc);
2755
2756 kfree(ioc->spi_data.nvram);
2757 mpt_inactive_raid_list_free(ioc);
2758 kfree(ioc->raid_data.pIocPg2);
2759 kfree(ioc->raid_data.pIocPg3);
2760 ioc->spi_data.nvram = NULL;
2761 ioc->raid_data.pIocPg3 = NULL;
2762
2763 if (ioc->spi_data.pIocPg4 != NULL) {
2764 sz = ioc->spi_data.IocPg4Sz;
2765 dma_free_coherent(&ioc->pcidev->dev, sz,
2766 ioc->spi_data.pIocPg4,
2767 ioc->spi_data.IocPg4_dma);
2768 ioc->spi_data.pIocPg4 = NULL;
2769 ioc->alloc_total -= sz;
2770 }
2771
2772 if (ioc->ReqToChain != NULL) {
2773 kfree(ioc->ReqToChain);
2774 kfree(ioc->RequestNB);
2775 ioc->ReqToChain = NULL;
2776 }
2777
2778 kfree(ioc->ChainToChain);
2779 ioc->ChainToChain = NULL;
2780
2781 if (ioc->HostPageBuffer != NULL) {
2782 if((ret = mpt_host_page_access_control(ioc,
2783 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2784 printk(MYIOC_s_ERR_FMT
2785 ": %s: host page buffers free failed (%d)!\n",
2786 ioc->name, __func__, ret);
2787 }
2788 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2789 "HostPageBuffer free @ %p, sz=%d bytes\n",
2790 ioc->name, ioc->HostPageBuffer,
2791 ioc->HostPageBuffer_sz));
2792 dma_free_coherent(&ioc->pcidev->dev, ioc->HostPageBuffer_sz,
2793 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2794 ioc->HostPageBuffer = NULL;
2795 ioc->HostPageBuffer_sz = 0;
2796 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2797 }
2798
2799 pci_set_drvdata(ioc->pcidev, NULL);
2800}
2801/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2802/**
2803 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2804 * @ioc: Pointer to MPT adapter structure
2805 *
2806 * This routine unregisters h/w resources and frees all alloc'd memory
2807 * associated with a MPT adapter structure.
2808 */
2809static void
2810mpt_adapter_dispose(MPT_ADAPTER *ioc)
2811{
2812 int sz_first, sz_last;
2813
2814 if (ioc == NULL)
2815 return;
2816
2817 sz_first = ioc->alloc_total;
2818
2819 mpt_adapter_disable(ioc);
2820
2821 if (ioc->pci_irq != -1) {
2822 free_irq(ioc->pci_irq, ioc);
2823 if (ioc->msi_enable)
2824 pci_disable_msi(ioc->pcidev);
2825 ioc->pci_irq = -1;
2826 }
2827
2828 if (ioc->memmap != NULL) {
2829 iounmap(ioc->memmap);
2830 ioc->memmap = NULL;
2831 }
2832
2833 pci_disable_device(ioc->pcidev);
2834 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2835
2836 /* Zap the adapter lookup ptr! */
2837 list_del(&ioc->list);
2838
2839 sz_last = ioc->alloc_total;
2840 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2841 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2842
2843 if (ioc->alt_ioc)
2844 ioc->alt_ioc->alt_ioc = NULL;
2845
2846 kfree(ioc);
2847}
2848
2849/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2850/**
2851 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2852 * @ioc: Pointer to MPT adapter structure
2853 */
2854static void
2855MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2856{
2857 int i = 0;
2858
2859 printk(KERN_INFO "%s: ", ioc->name);
2860 if (ioc->prod_name)
2861 pr_cont("%s: ", ioc->prod_name);
2862 pr_cont("Capabilities={");
2863
2864 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2865 pr_cont("Initiator");
2866 i++;
2867 }
2868
2869 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2870 pr_cont("%sTarget", i ? "," : "");
2871 i++;
2872 }
2873
2874 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2875 pr_cont("%sLAN", i ? "," : "");
2876 i++;
2877 }
2878
2879#if 0
2880 /*
2881 * This would probably evoke more questions than it's worth
2882 */
2883 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2884 pr_cont("%sLogBusAddr", i ? "," : "");
2885 i++;
2886 }
2887#endif
2888
2889 pr_cont("}\n");
2890}
2891
2892/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2893/**
2894 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2895 * @ioc: Pointer to MPT_ADAPTER structure
2896 * @force: Force hard KickStart of IOC
2897 * @sleepFlag: Specifies whether the process can sleep
2898 *
2899 * Returns:
2900 * 1 - DIAG reset and READY
2901 * 0 - READY initially OR soft reset and READY
2902 * -1 - Any failure on KickStart
2903 * -2 - Msg Unit Reset Failed
2904 * -3 - IO Unit Reset Failed
2905 * -4 - IOC owned by a PEER
2906 */
2907static int
2908MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2909{
2910 u32 ioc_state;
2911 int statefault = 0;
2912 int cntdn;
2913 int hard_reset_done = 0;
2914 int r;
2915 int ii;
2916 int whoinit;
2917
2918 /* Get current [raw] IOC state */
2919 ioc_state = mpt_GetIocState(ioc, 0);
2920 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2921
2922 /*
2923 * Check to see if IOC got left/stuck in doorbell handshake
2924 * grip of death. If so, hard reset the IOC.
2925 */
2926 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2927 statefault = 1;
2928 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2929 ioc->name);
2930 }
2931
2932 /* Is it already READY? */
2933 if (!statefault &&
2934 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2935 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2936 "IOC is in READY state\n", ioc->name));
2937 return 0;
2938 }
2939
2940 /*
2941 * Check to see if IOC is in FAULT state.
2942 */
2943 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2944 statefault = 2;
2945 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2946 ioc->name);
2947 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2948 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2949 }
2950
2951 /*
2952 * Hmmm... Did it get left operational?
2953 */
2954 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2955 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2956 ioc->name));
2957
2958 /* Check WhoInit.
2959 * If PCI Peer, exit.
2960 * Else, if no fault conditions are present, issue a MessageUnitReset
2961 * Else, fall through to KickStart case
2962 */
2963 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2964 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2965 "whoinit 0x%x statefault %d force %d\n",
2966 ioc->name, whoinit, statefault, force));
2967 if (whoinit == MPI_WHOINIT_PCI_PEER)
2968 return -4;
2969 else {
2970 if ((statefault == 0 ) && (force == 0)) {
2971 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2972 return 0;
2973 }
2974 statefault = 3;
2975 }
2976 }
2977
2978 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2979 if (hard_reset_done < 0)
2980 return -1;
2981
2982 /*
2983 * Loop here waiting for IOC to come READY.
2984 */
2985 ii = 0;
2986 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2987
2988 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2989 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2990 /*
2991 * BIOS or previous driver load left IOC in OP state.
2992 * Reset messaging FIFOs.
2993 */
2994 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
2995 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
2996 return -2;
2997 }
2998 } else if (ioc_state == MPI_IOC_STATE_RESET) {
2999 /*
3000 * Something is wrong. Try to get IOC back
3001 * to a known state.
3002 */
3003 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3004 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3005 return -3;
3006 }
3007 }
3008
3009 ii++; cntdn--;
3010 if (!cntdn) {
3011 printk(MYIOC_s_ERR_FMT
3012 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3013 ioc->name, ioc_state, (int)((ii+5)/HZ));
3014 return -ETIME;
3015 }
3016
3017 if (sleepFlag == CAN_SLEEP) {
3018 msleep(1);
3019 } else {
3020 mdelay (1); /* 1 msec delay */
3021 }
3022
3023 }
3024
3025 if (statefault < 3) {
3026 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3027 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3028 }
3029
3030 return hard_reset_done;
3031}
3032
3033/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3034/**
3035 * mpt_GetIocState - Get the current state of a MPT adapter.
3036 * @ioc: Pointer to MPT_ADAPTER structure
3037 * @cooked: Request raw or cooked IOC state
3038 *
3039 * Returns all IOC Doorbell register bits if cooked==0, else just the
3040 * Doorbell bits in MPI_IOC_STATE_MASK.
3041 */
3042u32
3043mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3044{
3045 u32 s, sc;
3046
3047 /* Get! */
3048 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3049 sc = s & MPI_IOC_STATE_MASK;
3050
3051 /* Save! */
3052 ioc->last_state = sc;
3053
3054 return cooked ? sc : s;
3055}
3056
3057/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3058/**
3059 * GetIocFacts - Send IOCFacts request to MPT adapter.
3060 * @ioc: Pointer to MPT_ADAPTER structure
3061 * @sleepFlag: Specifies whether the process can sleep
3062 * @reason: If recovery, only update facts.
3063 *
3064 * Returns 0 for success, non-zero for failure.
3065 */
3066static int
3067GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3068{
3069 IOCFacts_t get_facts;
3070 IOCFactsReply_t *facts;
3071 int r;
3072 int req_sz;
3073 int reply_sz;
3074 int sz;
3075 u32 vv;
3076 u8 shiftFactor=1;
3077
3078 /* IOC *must* NOT be in RESET state! */
3079 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3080 printk(KERN_ERR MYNAM
3081 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3082 ioc->name, ioc->last_state);
3083 return -44;
3084 }
3085
3086 facts = &ioc->facts;
3087
3088 /* Destination (reply area)... */
3089 reply_sz = sizeof(*facts);
3090 memset(facts, 0, reply_sz);
3091
3092 /* Request area (get_facts on the stack right now!) */
3093 req_sz = sizeof(get_facts);
3094 memset(&get_facts, 0, req_sz);
3095
3096 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3097 /* Assert: All other get_facts fields are zero! */
3098
3099 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3100 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3101 ioc->name, req_sz, reply_sz));
3102
3103 /* No non-zero fields in the get_facts request are greater than
3104 * 1 byte in size, so we can just fire it off as is.
3105 */
3106 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3107 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3108 if (r != 0)
3109 return r;
3110
3111 /*
3112 * Now byte swap (GRRR) the necessary fields before any further
3113 * inspection of reply contents.
3114 *
3115 * But need to do some sanity checks on MsgLength (byte) field
3116 * to make sure we don't zero IOC's req_sz!
3117 */
3118 /* Did we get a valid reply? */
3119 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3120 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3121 /*
3122 * If not been here, done that, save off first WhoInit value
3123 */
3124 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3125 ioc->FirstWhoInit = facts->WhoInit;
3126 }
3127
3128 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3129 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3130 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3131 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3132 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3133 /* CHECKME! IOCStatus, IOCLogInfo */
3134
3135 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3136 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3137
3138 /*
3139 * FC f/w version changed between 1.1 and 1.2
3140 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3141 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3142 */
3143 if (facts->MsgVersion < MPI_VERSION_01_02) {
3144 /*
3145 * Handle old FC f/w style, convert to new...
3146 */
3147 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3148 facts->FWVersion.Word =
3149 ((oldv<<12) & 0xFF000000) |
3150 ((oldv<<8) & 0x000FFF00);
3151 } else
3152 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3153
3154 facts->ProductID = le16_to_cpu(facts->ProductID);
3155
3156 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3157 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3158 ioc->ir_firmware = 1;
3159
3160 facts->CurrentHostMfaHighAddr =
3161 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3162 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3163 facts->CurrentSenseBufferHighAddr =
3164 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3165 facts->CurReplyFrameSize =
3166 le16_to_cpu(facts->CurReplyFrameSize);
3167 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3168
3169 /*
3170 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3171 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3172 * to 14 in MPI-1.01.0x.
3173 */
3174 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3175 facts->MsgVersion > MPI_VERSION_01_00) {
3176 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3177 }
3178
3179 facts->FWImageSize = ALIGN(facts->FWImageSize, 4);
3180
3181 if (!facts->RequestFrameSize) {
3182 /* Something is wrong! */
3183 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3184 ioc->name);
3185 return -55;
3186 }
3187
3188 r = sz = facts->BlockSize;
3189 vv = ((63 / (sz * 4)) + 1) & 0x03;
3190 ioc->NB_for_64_byte_frame = vv;
3191 while ( sz )
3192 {
3193 shiftFactor++;
3194 sz = sz >> 1;
3195 }
3196 ioc->NBShiftFactor = shiftFactor;
3197 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3198 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3199 ioc->name, vv, shiftFactor, r));
3200
3201 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3202 /*
3203 * Set values for this IOC's request & reply frame sizes,
3204 * and request & reply queue depths...
3205 */
3206 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3207 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3208 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3209 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3210
3211 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3212 ioc->name, ioc->reply_sz, ioc->reply_depth));
3213 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3214 ioc->name, ioc->req_sz, ioc->req_depth));
3215
3216 /* Get port facts! */
3217 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3218 return r;
3219 }
3220 } else {
3221 printk(MYIOC_s_ERR_FMT
3222 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3223 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3224 RequestFrameSize)/sizeof(u32)));
3225 return -66;
3226 }
3227
3228 return 0;
3229}
3230
3231/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3232/**
3233 * GetPortFacts - Send PortFacts request to MPT adapter.
3234 * @ioc: Pointer to MPT_ADAPTER structure
3235 * @portnum: Port number
3236 * @sleepFlag: Specifies whether the process can sleep
3237 *
3238 * Returns 0 for success, non-zero for failure.
3239 */
3240static int
3241GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3242{
3243 PortFacts_t get_pfacts;
3244 PortFactsReply_t *pfacts;
3245 int ii;
3246 int req_sz;
3247 int reply_sz;
3248 int max_id;
3249
3250 /* IOC *must* NOT be in RESET state! */
3251 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3252 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3253 ioc->name, ioc->last_state );
3254 return -4;
3255 }
3256
3257 pfacts = &ioc->pfacts[portnum];
3258
3259 /* Destination (reply area)... */
3260 reply_sz = sizeof(*pfacts);
3261 memset(pfacts, 0, reply_sz);
3262
3263 /* Request area (get_pfacts on the stack right now!) */
3264 req_sz = sizeof(get_pfacts);
3265 memset(&get_pfacts, 0, req_sz);
3266
3267 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3268 get_pfacts.PortNumber = portnum;
3269 /* Assert: All other get_pfacts fields are zero! */
3270
3271 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3272 ioc->name, portnum));
3273
3274 /* No non-zero fields in the get_pfacts request are greater than
3275 * 1 byte in size, so we can just fire it off as is.
3276 */
3277 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3278 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3279 if (ii != 0)
3280 return ii;
3281
3282 /* Did we get a valid reply? */
3283
3284 /* Now byte swap the necessary fields in the response. */
3285 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3286 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3287 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3288 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3289 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3290 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3291 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3292 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3293 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3294
3295 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3296 pfacts->MaxDevices;
3297 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3298 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3299
3300 /*
3301 * Place all the devices on channels
3302 *
3303 * (for debuging)
3304 */
3305 if (mpt_channel_mapping) {
3306 ioc->devices_per_bus = 1;
3307 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3308 }
3309
3310 return 0;
3311}
3312
3313/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3314/**
3315 * SendIocInit - Send IOCInit request to MPT adapter.
3316 * @ioc: Pointer to MPT_ADAPTER structure
3317 * @sleepFlag: Specifies whether the process can sleep
3318 *
3319 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3320 *
3321 * Returns 0 for success, non-zero for failure.
3322 */
3323static int
3324SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3325{
3326 IOCInit_t ioc_init;
3327 MPIDefaultReply_t init_reply;
3328 u32 state;
3329 int r;
3330 int count;
3331 int cntdn;
3332
3333 memset(&ioc_init, 0, sizeof(ioc_init));
3334 memset(&init_reply, 0, sizeof(init_reply));
3335
3336 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3337 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3338
3339 /* If we are in a recovery mode and we uploaded the FW image,
3340 * then this pointer is not NULL. Skip the upload a second time.
3341 * Set this flag if cached_fw set for either IOC.
3342 */
3343 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3344 ioc->upload_fw = 1;
3345 else
3346 ioc->upload_fw = 0;
3347 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3348 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3349
3350 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3351 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3352
3353 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3354 ioc->name, ioc->facts.MsgVersion));
3355 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3356 // set MsgVersion and HeaderVersion host driver was built with
3357 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3358 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3359
3360 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3361 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3362 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3363 return -99;
3364 }
3365 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3366
3367 if (ioc->sg_addr_size == sizeof(u64)) {
3368 /* Save the upper 32-bits of the request
3369 * (reply) and sense buffers.
3370 */
3371 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3372 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3373 } else {
3374 /* Force 32-bit addressing */
3375 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3376 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3377 }
3378
3379 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3380 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3381 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3382 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3383
3384 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3385 ioc->name, &ioc_init));
3386
3387 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3388 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3389 if (r != 0) {
3390 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3391 return r;
3392 }
3393
3394 /* No need to byte swap the multibyte fields in the reply
3395 * since we don't even look at its contents.
3396 */
3397
3398 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3399 ioc->name, &ioc_init));
3400
3401 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3402 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3403 return r;
3404 }
3405
3406 /* YIKES! SUPER IMPORTANT!!!
3407 * Poll IocState until _OPERATIONAL while IOC is doing
3408 * LoopInit and TargetDiscovery!
3409 */
3410 count = 0;
3411 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3412 state = mpt_GetIocState(ioc, 1);
3413 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3414 if (sleepFlag == CAN_SLEEP) {
3415 msleep(1);
3416 } else {
3417 mdelay(1);
3418 }
3419
3420 if (!cntdn) {
3421 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3422 ioc->name, (int)((count+5)/HZ));
3423 return -9;
3424 }
3425
3426 state = mpt_GetIocState(ioc, 1);
3427 count++;
3428 }
3429 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3430 ioc->name, count));
3431
3432 ioc->aen_event_read_flag=0;
3433 return r;
3434}
3435
3436/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3437/**
3438 * SendPortEnable - Send PortEnable request to MPT adapter port.
3439 * @ioc: Pointer to MPT_ADAPTER structure
3440 * @portnum: Port number to enable
3441 * @sleepFlag: Specifies whether the process can sleep
3442 *
3443 * Send PortEnable to bring IOC to OPERATIONAL state.
3444 *
3445 * Returns 0 for success, non-zero for failure.
3446 */
3447static int
3448SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3449{
3450 PortEnable_t port_enable;
3451 MPIDefaultReply_t reply_buf;
3452 int rc;
3453 int req_sz;
3454 int reply_sz;
3455
3456 /* Destination... */
3457 reply_sz = sizeof(MPIDefaultReply_t);
3458 memset(&reply_buf, 0, reply_sz);
3459
3460 req_sz = sizeof(PortEnable_t);
3461 memset(&port_enable, 0, req_sz);
3462
3463 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3464 port_enable.PortNumber = portnum;
3465/* port_enable.ChainOffset = 0; */
3466/* port_enable.MsgFlags = 0; */
3467/* port_enable.MsgContext = 0; */
3468
3469 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3470 ioc->name, portnum, &port_enable));
3471
3472 /* RAID FW may take a long time to enable
3473 */
3474 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3475 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3476 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3477 300 /*seconds*/, sleepFlag);
3478 } else {
3479 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3480 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3481 30 /*seconds*/, sleepFlag);
3482 }
3483 return rc;
3484}
3485
3486/**
3487 * mpt_alloc_fw_memory - allocate firmware memory
3488 * @ioc: Pointer to MPT_ADAPTER structure
3489 * @size: total FW bytes
3490 *
3491 * If memory has already been allocated, the same (cached) value
3492 * is returned.
3493 *
3494 * Return 0 if successful, or non-zero for failure
3495 **/
3496int
3497mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3498{
3499 int rc;
3500
3501 if (ioc->cached_fw) {
3502 rc = 0; /* use already allocated memory */
3503 goto out;
3504 }
3505 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3506 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3507 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3508 rc = 0;
3509 goto out;
3510 }
3511 ioc->cached_fw = dma_alloc_coherent(&ioc->pcidev->dev, size,
3512 &ioc->cached_fw_dma, GFP_ATOMIC);
3513 if (!ioc->cached_fw) {
3514 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3515 ioc->name);
3516 rc = -1;
3517 } else {
3518 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3519 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3520 ioc->alloc_total += size;
3521 rc = 0;
3522 }
3523 out:
3524 return rc;
3525}
3526
3527/**
3528 * mpt_free_fw_memory - free firmware memory
3529 * @ioc: Pointer to MPT_ADAPTER structure
3530 *
3531 * If alt_img is NULL, delete from ioc structure.
3532 * Else, delete a secondary image in same format.
3533 **/
3534void
3535mpt_free_fw_memory(MPT_ADAPTER *ioc)
3536{
3537 int sz;
3538
3539 if (!ioc->cached_fw)
3540 return;
3541
3542 sz = ioc->facts.FWImageSize;
3543 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3544 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3545 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->cached_fw,
3546 ioc->cached_fw_dma);
3547 ioc->alloc_total -= sz;
3548 ioc->cached_fw = NULL;
3549}
3550
3551/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3552/**
3553 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3554 * @ioc: Pointer to MPT_ADAPTER structure
3555 * @sleepFlag: Specifies whether the process can sleep
3556 *
3557 * Returns 0 for success, >0 for handshake failure
3558 * <0 for fw upload failure.
3559 *
3560 * Remark: If bound IOC and a successful FWUpload was performed
3561 * on the bound IOC, the second image is discarded
3562 * and memory is free'd. Both channels must upload to prevent
3563 * IOC from running in degraded mode.
3564 */
3565static int
3566mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3567{
3568 u8 reply[sizeof(FWUploadReply_t)];
3569 FWUpload_t *prequest;
3570 FWUploadReply_t *preply;
3571 FWUploadTCSGE_t *ptcsge;
3572 u32 flagsLength;
3573 int ii, sz, reply_sz;
3574 int cmdStatus;
3575 int request_size;
3576 /* If the image size is 0, we are done.
3577 */
3578 if ((sz = ioc->facts.FWImageSize) == 0)
3579 return 0;
3580
3581 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3582 return -ENOMEM;
3583
3584 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3585 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3586
3587 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3588 kzalloc(ioc->req_sz, GFP_KERNEL);
3589 if (!prequest) {
3590 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3591 "while allocating memory \n", ioc->name));
3592 mpt_free_fw_memory(ioc);
3593 return -ENOMEM;
3594 }
3595
3596 preply = (FWUploadReply_t *)&reply;
3597
3598 reply_sz = sizeof(reply);
3599 memset(preply, 0, reply_sz);
3600
3601 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3602 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3603
3604 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3605 ptcsge->DetailsLength = 12;
3606 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3607 ptcsge->ImageSize = cpu_to_le32(sz);
3608 ptcsge++;
3609
3610 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3611 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3612 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3613 ioc->SGE_size;
3614 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3615 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3616 ioc->facts.FWImageSize, request_size));
3617 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3618
3619 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3620 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3621
3622 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3623 "rc=%x \n", ioc->name, ii));
3624
3625 cmdStatus = -EFAULT;
3626 if (ii == 0) {
3627 /* Handshake transfer was complete and successful.
3628 * Check the Reply Frame.
3629 */
3630 int status;
3631 status = le16_to_cpu(preply->IOCStatus) &
3632 MPI_IOCSTATUS_MASK;
3633 if (status == MPI_IOCSTATUS_SUCCESS &&
3634 ioc->facts.FWImageSize ==
3635 le32_to_cpu(preply->ActualImageSize))
3636 cmdStatus = 0;
3637 }
3638 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3639 ioc->name, cmdStatus));
3640
3641
3642 if (cmdStatus) {
3643 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3644 "freeing image \n", ioc->name));
3645 mpt_free_fw_memory(ioc);
3646 }
3647 kfree(prequest);
3648
3649 return cmdStatus;
3650}
3651
3652/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3653/**
3654 * mpt_downloadboot - DownloadBoot code
3655 * @ioc: Pointer to MPT_ADAPTER structure
3656 * @pFwHeader: Pointer to firmware header info
3657 * @sleepFlag: Specifies whether the process can sleep
3658 *
3659 * FwDownloadBoot requires Programmed IO access.
3660 *
3661 * Returns 0 for success
3662 * -1 FW Image size is 0
3663 * -2 No valid cached_fw Pointer
3664 * <0 for fw upload failure.
3665 */
3666static int
3667mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3668{
3669 MpiExtImageHeader_t *pExtImage;
3670 u32 fwSize;
3671 u32 diag0val;
3672 int count;
3673 u32 *ptrFw;
3674 u32 diagRwData;
3675 u32 nextImage;
3676 u32 load_addr;
3677 u32 ioc_state=0;
3678
3679 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3680 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3681
3682 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3683 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3684 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3685 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3686 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3687 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3688
3689 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3690
3691 /* wait 1 msec */
3692 if (sleepFlag == CAN_SLEEP) {
3693 msleep(1);
3694 } else {
3695 mdelay (1);
3696 }
3697
3698 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3699 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3700
3701 for (count = 0; count < 30; count ++) {
3702 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3703 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3704 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3705 ioc->name, count));
3706 break;
3707 }
3708 /* wait .1 sec */
3709 if (sleepFlag == CAN_SLEEP) {
3710 msleep (100);
3711 } else {
3712 mdelay (100);
3713 }
3714 }
3715
3716 if ( count == 30 ) {
3717 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3718 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3719 ioc->name, diag0val));
3720 return -3;
3721 }
3722
3723 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3724 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3725 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3726 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3727 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3728 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3729
3730 /* Set the DiagRwEn and Disable ARM bits */
3731 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3732
3733 fwSize = (pFwHeader->ImageSize + 3)/4;
3734 ptrFw = (u32 *) pFwHeader;
3735
3736 /* Write the LoadStartAddress to the DiagRw Address Register
3737 * using Programmed IO
3738 */
3739 if (ioc->errata_flag_1064)
3740 pci_enable_io_access(ioc->pcidev);
3741
3742 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3743 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3744 ioc->name, pFwHeader->LoadStartAddress));
3745
3746 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3747 ioc->name, fwSize*4, ptrFw));
3748 while (fwSize--) {
3749 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3750 }
3751
3752 nextImage = pFwHeader->NextImageHeaderOffset;
3753 while (nextImage) {
3754 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3755
3756 load_addr = pExtImage->LoadStartAddress;
3757
3758 fwSize = (pExtImage->ImageSize + 3) >> 2;
3759 ptrFw = (u32 *)pExtImage;
3760
3761 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3762 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3763 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3764
3765 while (fwSize--) {
3766 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3767 }
3768 nextImage = pExtImage->NextImageHeaderOffset;
3769 }
3770
3771 /* Write the IopResetVectorRegAddr */
3772 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3773 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3774
3775 /* Write the IopResetVectorValue */
3776 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3777 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3778
3779 /* Clear the internal flash bad bit - autoincrementing register,
3780 * so must do two writes.
3781 */
3782 if (ioc->bus_type == SPI) {
3783 /*
3784 * 1030 and 1035 H/W errata, workaround to access
3785 * the ClearFlashBadSignatureBit
3786 */
3787 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3788 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3789 diagRwData |= 0x40000000;
3790 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3791 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3792
3793 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3794 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3795 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3796 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3797
3798 /* wait 1 msec */
3799 if (sleepFlag == CAN_SLEEP) {
3800 msleep (1);
3801 } else {
3802 mdelay (1);
3803 }
3804 }
3805
3806 if (ioc->errata_flag_1064)
3807 pci_disable_io_access(ioc->pcidev);
3808
3809 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3810 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3811 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3812 ioc->name, diag0val));
3813 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3814 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3815 ioc->name, diag0val));
3816 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3817
3818 /* Write 0xFF to reset the sequencer */
3819 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3820
3821 if (ioc->bus_type == SAS) {
3822 ioc_state = mpt_GetIocState(ioc, 0);
3823 if ( (GetIocFacts(ioc, sleepFlag,
3824 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3825 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3826 ioc->name, ioc_state));
3827 return -EFAULT;
3828 }
3829 }
3830
3831 for (count=0; count<HZ*20; count++) {
3832 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3833 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3834 "downloadboot successful! (count=%d) IocState=%x\n",
3835 ioc->name, count, ioc_state));
3836 if (ioc->bus_type == SAS) {
3837 return 0;
3838 }
3839 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3840 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3841 "downloadboot: SendIocInit failed\n",
3842 ioc->name));
3843 return -EFAULT;
3844 }
3845 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3846 "downloadboot: SendIocInit successful\n",
3847 ioc->name));
3848 return 0;
3849 }
3850 if (sleepFlag == CAN_SLEEP) {
3851 msleep (10);
3852 } else {
3853 mdelay (10);
3854 }
3855 }
3856 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3857 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3858 return -EFAULT;
3859}
3860
3861/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3862/**
3863 * KickStart - Perform hard reset of MPT adapter.
3864 * @ioc: Pointer to MPT_ADAPTER structure
3865 * @force: Force hard reset
3866 * @sleepFlag: Specifies whether the process can sleep
3867 *
3868 * This routine places MPT adapter in diagnostic mode via the
3869 * WriteSequence register, and then performs a hard reset of adapter
3870 * via the Diagnostic register.
3871 *
3872 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3873 * or NO_SLEEP (interrupt thread, use mdelay)
3874 * force - 1 if doorbell active, board fault state
3875 * board operational, IOC_RECOVERY or
3876 * IOC_BRINGUP and there is an alt_ioc.
3877 * 0 else
3878 *
3879 * Returns:
3880 * 1 - hard reset, READY
3881 * 0 - no reset due to History bit, READY
3882 * -1 - no reset due to History bit but not READY
3883 * OR reset but failed to come READY
3884 * -2 - no reset, could not enter DIAG mode
3885 * -3 - reset but bad FW bit
3886 */
3887static int
3888KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3889{
3890 int hard_reset_done = 0;
3891 u32 ioc_state=0;
3892 int cnt,cntdn;
3893
3894 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3895 if (ioc->bus_type == SPI) {
3896 /* Always issue a Msg Unit Reset first. This will clear some
3897 * SCSI bus hang conditions.
3898 */
3899 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3900
3901 if (sleepFlag == CAN_SLEEP) {
3902 msleep (1000);
3903 } else {
3904 mdelay (1000);
3905 }
3906 }
3907
3908 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3909 if (hard_reset_done < 0)
3910 return hard_reset_done;
3911
3912 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3913 ioc->name));
3914
3915 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3916 for (cnt=0; cnt<cntdn; cnt++) {
3917 ioc_state = mpt_GetIocState(ioc, 1);
3918 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3919 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3920 ioc->name, cnt));
3921 return hard_reset_done;
3922 }
3923 if (sleepFlag == CAN_SLEEP) {
3924 msleep (10);
3925 } else {
3926 mdelay (10);
3927 }
3928 }
3929
3930 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3931 ioc->name, mpt_GetIocState(ioc, 0)));
3932 return -1;
3933}
3934
3935/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3936/**
3937 * mpt_diag_reset - Perform hard reset of the adapter.
3938 * @ioc: Pointer to MPT_ADAPTER structure
3939 * @ignore: Set if to honor and clear to ignore
3940 * the reset history bit
3941 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3942 * else set to NO_SLEEP (use mdelay instead)
3943 *
3944 * This routine places the adapter in diagnostic mode via the
3945 * WriteSequence register and then performs a hard reset of adapter
3946 * via the Diagnostic register. Adapter should be in ready state
3947 * upon successful completion.
3948 *
3949 * Returns: 1 hard reset successful
3950 * 0 no reset performed because reset history bit set
3951 * -2 enabling diagnostic mode failed
3952 * -3 diagnostic reset failed
3953 */
3954static int
3955mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3956{
3957 u32 diag0val;
3958 u32 doorbell;
3959 int hard_reset_done = 0;
3960 int count = 0;
3961 u32 diag1val = 0;
3962 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3963 u8 cb_idx;
3964
3965 /* Clear any existing interrupts */
3966 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3967
3968 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3969
3970 if (!ignore)
3971 return 0;
3972
3973 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3974 "address=%p\n", ioc->name, __func__,
3975 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3976 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3977 if (sleepFlag == CAN_SLEEP)
3978 msleep(1);
3979 else
3980 mdelay(1);
3981
3982 /*
3983 * Call each currently registered protocol IOC reset handler
3984 * with pre-reset indication.
3985 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3986 * MptResetHandlers[] registered yet.
3987 */
3988 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3989 if (MptResetHandlers[cb_idx])
3990 (*(MptResetHandlers[cb_idx]))(ioc,
3991 MPT_IOC_PRE_RESET);
3992 }
3993
3994 for (count = 0; count < 60; count ++) {
3995 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
3996 doorbell &= MPI_IOC_STATE_MASK;
3997
3998 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3999 "looking for READY STATE: doorbell=%x"
4000 " count=%d\n",
4001 ioc->name, doorbell, count));
4002
4003 if (doorbell == MPI_IOC_STATE_READY) {
4004 return 1;
4005 }
4006
4007 /* wait 1 sec */
4008 if (sleepFlag == CAN_SLEEP)
4009 msleep(1000);
4010 else
4011 mdelay(1000);
4012 }
4013 return -1;
4014 }
4015
4016 /* Use "Diagnostic reset" method! (only thing available!) */
4017 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4018
4019 if (ioc->debug_level & MPT_DEBUG) {
4020 if (ioc->alt_ioc)
4021 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4022 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4023 ioc->name, diag0val, diag1val));
4024 }
4025
4026 /* Do the reset if we are told to ignore the reset history
4027 * or if the reset history is 0
4028 */
4029 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4030 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4031 /* Write magic sequence to WriteSequence register
4032 * Loop until in diagnostic mode
4033 */
4034 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4035 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4036 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4037 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4038 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4039 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4040
4041 /* wait 100 msec */
4042 if (sleepFlag == CAN_SLEEP) {
4043 msleep (100);
4044 } else {
4045 mdelay (100);
4046 }
4047
4048 count++;
4049 if (count > 20) {
4050 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4051 ioc->name, diag0val);
4052 return -2;
4053
4054 }
4055
4056 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4057
4058 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4059 ioc->name, diag0val));
4060 }
4061
4062 if (ioc->debug_level & MPT_DEBUG) {
4063 if (ioc->alt_ioc)
4064 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4065 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4066 ioc->name, diag0val, diag1val));
4067 }
4068 /*
4069 * Disable the ARM (Bug fix)
4070 *
4071 */
4072 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4073 mdelay(1);
4074
4075 /*
4076 * Now hit the reset bit in the Diagnostic register
4077 * (THE BIG HAMMER!) (Clears DRWE bit).
4078 */
4079 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4080 hard_reset_done = 1;
4081 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4082 ioc->name));
4083
4084 /*
4085 * Call each currently registered protocol IOC reset handler
4086 * with pre-reset indication.
4087 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4088 * MptResetHandlers[] registered yet.
4089 */
4090 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4091 if (MptResetHandlers[cb_idx]) {
4092 mpt_signal_reset(cb_idx,
4093 ioc, MPT_IOC_PRE_RESET);
4094 if (ioc->alt_ioc) {
4095 mpt_signal_reset(cb_idx,
4096 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4097 }
4098 }
4099 }
4100
4101 if (ioc->cached_fw)
4102 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4103 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4104 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4105 else
4106 cached_fw = NULL;
4107 if (cached_fw) {
4108 /* If the DownloadBoot operation fails, the
4109 * IOC will be left unusable. This is a fatal error
4110 * case. _diag_reset will return < 0
4111 */
4112 for (count = 0; count < 30; count ++) {
4113 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4114 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4115 break;
4116 }
4117
4118 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4119 ioc->name, diag0val, count));
4120 /* wait 1 sec */
4121 if (sleepFlag == CAN_SLEEP) {
4122 msleep (1000);
4123 } else {
4124 mdelay (1000);
4125 }
4126 }
4127 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4128 printk(MYIOC_s_WARN_FMT
4129 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4130 }
4131
4132 } else {
4133 /* Wait for FW to reload and for board
4134 * to go to the READY state.
4135 * Maximum wait is 60 seconds.
4136 * If fail, no error will check again
4137 * with calling program.
4138 */
4139 for (count = 0; count < 60; count ++) {
4140 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4141 doorbell &= MPI_IOC_STATE_MASK;
4142
4143 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4144 "looking for READY STATE: doorbell=%x"
4145 " count=%d\n", ioc->name, doorbell, count));
4146
4147 if (doorbell == MPI_IOC_STATE_READY) {
4148 break;
4149 }
4150
4151 /* wait 1 sec */
4152 if (sleepFlag == CAN_SLEEP) {
4153 msleep (1000);
4154 } else {
4155 mdelay (1000);
4156 }
4157 }
4158
4159 if (doorbell != MPI_IOC_STATE_READY)
4160 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4161 "after reset! IocState=%x", ioc->name,
4162 doorbell);
4163 }
4164 }
4165
4166 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4167 if (ioc->debug_level & MPT_DEBUG) {
4168 if (ioc->alt_ioc)
4169 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4170 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4171 ioc->name, diag0val, diag1val));
4172 }
4173
4174 /* Clear RESET_HISTORY bit! Place board in the
4175 * diagnostic mode to update the diag register.
4176 */
4177 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4178 count = 0;
4179 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4180 /* Write magic sequence to WriteSequence register
4181 * Loop until in diagnostic mode
4182 */
4183 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4184 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4185 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4186 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4187 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4188 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4189
4190 /* wait 100 msec */
4191 if (sleepFlag == CAN_SLEEP) {
4192 msleep (100);
4193 } else {
4194 mdelay (100);
4195 }
4196
4197 count++;
4198 if (count > 20) {
4199 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4200 ioc->name, diag0val);
4201 break;
4202 }
4203 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4204 }
4205 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4206 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4207 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4208 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4209 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4210 ioc->name);
4211 }
4212
4213 /* Disable Diagnostic Mode
4214 */
4215 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4216
4217 /* Check FW reload status flags.
4218 */
4219 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4220 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4221 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4222 ioc->name, diag0val);
4223 return -3;
4224 }
4225
4226 if (ioc->debug_level & MPT_DEBUG) {
4227 if (ioc->alt_ioc)
4228 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4229 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4230 ioc->name, diag0val, diag1val));
4231 }
4232
4233 /*
4234 * Reset flag that says we've enabled event notification
4235 */
4236 ioc->facts.EventState = 0;
4237
4238 if (ioc->alt_ioc)
4239 ioc->alt_ioc->facts.EventState = 0;
4240
4241 return hard_reset_done;
4242}
4243
4244/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4245/**
4246 * SendIocReset - Send IOCReset request to MPT adapter.
4247 * @ioc: Pointer to MPT_ADAPTER structure
4248 * @reset_type: reset type, expected values are
4249 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4250 * @sleepFlag: Specifies whether the process can sleep
4251 *
4252 * Send IOCReset request to the MPT adapter.
4253 *
4254 * Returns 0 for success, non-zero for failure.
4255 */
4256static int
4257SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4258{
4259 int r;
4260 u32 state;
4261 int cntdn, count;
4262
4263 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4264 ioc->name, reset_type));
4265 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4266 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4267 return r;
4268
4269 /* FW ACK'd request, wait for READY state
4270 */
4271 count = 0;
4272 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4273
4274 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4275 cntdn--;
4276 count++;
4277 if (!cntdn) {
4278 if (sleepFlag != CAN_SLEEP)
4279 count *= 10;
4280
4281 printk(MYIOC_s_ERR_FMT
4282 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4283 ioc->name, state, (int)((count+5)/HZ));
4284 return -ETIME;
4285 }
4286
4287 if (sleepFlag == CAN_SLEEP) {
4288 msleep(1);
4289 } else {
4290 mdelay (1); /* 1 msec delay */
4291 }
4292 }
4293
4294 /* TODO!
4295 * Cleanup all event stuff for this IOC; re-issue EventNotification
4296 * request if needed.
4297 */
4298 if (ioc->facts.Function)
4299 ioc->facts.EventState = 0;
4300
4301 return 0;
4302}
4303
4304/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4305/**
4306 * initChainBuffers - Allocate memory for and initialize chain buffers
4307 * @ioc: Pointer to MPT_ADAPTER structure
4308 *
4309 * Allocates memory for and initializes chain buffers,
4310 * chain buffer control arrays and spinlock.
4311 */
4312static int
4313initChainBuffers(MPT_ADAPTER *ioc)
4314{
4315 u8 *mem;
4316 int sz, ii, num_chain;
4317 int scale, num_sge, numSGE;
4318
4319 /* ReqToChain size must equal the req_depth
4320 * index = req_idx
4321 */
4322 if (ioc->ReqToChain == NULL) {
4323 sz = ioc->req_depth * sizeof(int);
4324 mem = kmalloc(sz, GFP_ATOMIC);
4325 if (mem == NULL)
4326 return -1;
4327
4328 ioc->ReqToChain = (int *) mem;
4329 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4330 ioc->name, mem, sz));
4331 mem = kmalloc(sz, GFP_ATOMIC);
4332 if (mem == NULL)
4333 return -1;
4334
4335 ioc->RequestNB = (int *) mem;
4336 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4337 ioc->name, mem, sz));
4338 }
4339 for (ii = 0; ii < ioc->req_depth; ii++) {
4340 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4341 }
4342
4343 /* ChainToChain size must equal the total number
4344 * of chain buffers to be allocated.
4345 * index = chain_idx
4346 *
4347 * Calculate the number of chain buffers needed(plus 1) per I/O
4348 * then multiply the maximum number of simultaneous cmds
4349 *
4350 * num_sge = num sge in request frame + last chain buffer
4351 * scale = num sge per chain buffer if no chain element
4352 */
4353 scale = ioc->req_sz / ioc->SGE_size;
4354 if (ioc->sg_addr_size == sizeof(u64))
4355 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4356 else
4357 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4358
4359 if (ioc->sg_addr_size == sizeof(u64)) {
4360 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4361 (ioc->req_sz - 60) / ioc->SGE_size;
4362 } else {
4363 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4364 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4365 }
4366 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4367 ioc->name, num_sge, numSGE));
4368
4369 if (ioc->bus_type == FC) {
4370 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4371 numSGE = MPT_SCSI_FC_SG_DEPTH;
4372 } else {
4373 if (numSGE > MPT_SCSI_SG_DEPTH)
4374 numSGE = MPT_SCSI_SG_DEPTH;
4375 }
4376
4377 num_chain = 1;
4378 while (numSGE - num_sge > 0) {
4379 num_chain++;
4380 num_sge += (scale - 1);
4381 }
4382 num_chain++;
4383
4384 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4385 ioc->name, numSGE, num_sge, num_chain));
4386
4387 if (ioc->bus_type == SPI)
4388 num_chain *= MPT_SCSI_CAN_QUEUE;
4389 else if (ioc->bus_type == SAS)
4390 num_chain *= MPT_SAS_CAN_QUEUE;
4391 else
4392 num_chain *= MPT_FC_CAN_QUEUE;
4393
4394 ioc->num_chain = num_chain;
4395
4396 sz = num_chain * sizeof(int);
4397 if (ioc->ChainToChain == NULL) {
4398 mem = kmalloc(sz, GFP_ATOMIC);
4399 if (mem == NULL)
4400 return -1;
4401
4402 ioc->ChainToChain = (int *) mem;
4403 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4404 ioc->name, mem, sz));
4405 } else {
4406 mem = (u8 *) ioc->ChainToChain;
4407 }
4408 memset(mem, 0xFF, sz);
4409 return num_chain;
4410}
4411
4412/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4413/**
4414 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4415 * @ioc: Pointer to MPT_ADAPTER structure
4416 *
4417 * This routine allocates memory for the MPT reply and request frame
4418 * pools (if necessary), and primes the IOC reply FIFO with
4419 * reply frames.
4420 *
4421 * Returns 0 for success, non-zero for failure.
4422 */
4423static int
4424PrimeIocFifos(MPT_ADAPTER *ioc)
4425{
4426 MPT_FRAME_HDR *mf;
4427 unsigned long flags;
4428 dma_addr_t alloc_dma;
4429 u8 *mem;
4430 int i, reply_sz, sz, total_size, num_chain;
4431 u64 dma_mask;
4432
4433 dma_mask = 0;
4434
4435 /* Prime reply FIFO... */
4436
4437 if (ioc->reply_frames == NULL) {
4438 if ( (num_chain = initChainBuffers(ioc)) < 0)
4439 return -1;
4440 /*
4441 * 1078 errata workaround for the 36GB limitation
4442 */
4443 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4444 ioc->dma_mask > DMA_BIT_MASK(35)) {
4445 if (!dma_set_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))
4446 && !dma_set_coherent_mask(&ioc->pcidev->dev, DMA_BIT_MASK(32))) {
4447 dma_mask = DMA_BIT_MASK(35);
4448 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4449 "setting 35 bit addressing for "
4450 "Request/Reply/Chain and Sense Buffers\n",
4451 ioc->name));
4452 } else {
4453 /*Reseting DMA mask to 64 bit*/
4454 dma_set_mask(&ioc->pcidev->dev,
4455 DMA_BIT_MASK(64));
4456 dma_set_coherent_mask(&ioc->pcidev->dev,
4457 DMA_BIT_MASK(64));
4458
4459 printk(MYIOC_s_ERR_FMT
4460 "failed setting 35 bit addressing for "
4461 "Request/Reply/Chain and Sense Buffers\n",
4462 ioc->name);
4463 return -1;
4464 }
4465 }
4466
4467 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4468 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4469 ioc->name, ioc->reply_sz, ioc->reply_depth));
4470 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4471 ioc->name, reply_sz, reply_sz));
4472
4473 sz = (ioc->req_sz * ioc->req_depth);
4474 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4475 ioc->name, ioc->req_sz, ioc->req_depth));
4476 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4477 ioc->name, sz, sz));
4478 total_size += sz;
4479
4480 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4481 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4482 ioc->name, ioc->req_sz, num_chain));
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4484 ioc->name, sz, sz, num_chain));
4485
4486 total_size += sz;
4487 mem = dma_alloc_coherent(&ioc->pcidev->dev, total_size,
4488 &alloc_dma, GFP_KERNEL);
4489 if (mem == NULL) {
4490 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4491 ioc->name);
4492 goto out_fail;
4493 }
4494
4495 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4496 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4497
4498 memset(mem, 0, total_size);
4499 ioc->alloc_total += total_size;
4500 ioc->alloc = mem;
4501 ioc->alloc_dma = alloc_dma;
4502 ioc->alloc_sz = total_size;
4503 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4504 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4505
4506 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4507 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4508
4509 alloc_dma += reply_sz;
4510 mem += reply_sz;
4511
4512 /* Request FIFO - WE manage this! */
4513
4514 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4515 ioc->req_frames_dma = alloc_dma;
4516
4517 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4518 ioc->name, mem, (void *)(ulong)alloc_dma));
4519
4520 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4521
4522 for (i = 0; i < ioc->req_depth; i++) {
4523 alloc_dma += ioc->req_sz;
4524 mem += ioc->req_sz;
4525 }
4526
4527 ioc->ChainBuffer = mem;
4528 ioc->ChainBufferDMA = alloc_dma;
4529
4530 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4531 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4532
4533 /* Initialize the free chain Q.
4534 */
4535
4536 INIT_LIST_HEAD(&ioc->FreeChainQ);
4537
4538 /* Post the chain buffers to the FreeChainQ.
4539 */
4540 mem = (u8 *)ioc->ChainBuffer;
4541 for (i=0; i < num_chain; i++) {
4542 mf = (MPT_FRAME_HDR *) mem;
4543 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4544 mem += ioc->req_sz;
4545 }
4546
4547 /* Initialize Request frames linked list
4548 */
4549 alloc_dma = ioc->req_frames_dma;
4550 mem = (u8 *) ioc->req_frames;
4551
4552 spin_lock_irqsave(&ioc->FreeQlock, flags);
4553 INIT_LIST_HEAD(&ioc->FreeQ);
4554 for (i = 0; i < ioc->req_depth; i++) {
4555 mf = (MPT_FRAME_HDR *) mem;
4556
4557 /* Queue REQUESTs *internally*! */
4558 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4559
4560 mem += ioc->req_sz;
4561 }
4562 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4563
4564 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4565 ioc->sense_buf_pool = dma_alloc_coherent(&ioc->pcidev->dev, sz,
4566 &ioc->sense_buf_pool_dma, GFP_KERNEL);
4567 if (ioc->sense_buf_pool == NULL) {
4568 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4569 ioc->name);
4570 goto out_fail;
4571 }
4572
4573 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4574 ioc->alloc_total += sz;
4575 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4576 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4577
4578 }
4579
4580 /* Post Reply frames to FIFO
4581 */
4582 alloc_dma = ioc->alloc_dma;
4583 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4584 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4585
4586 for (i = 0; i < ioc->reply_depth; i++) {
4587 /* Write each address to the IOC! */
4588 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4589 alloc_dma += ioc->reply_sz;
4590 }
4591
4592 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev,
4593 ioc->dma_mask) && !dma_set_coherent_mask(&ioc->pcidev->dev,
4594 ioc->dma_mask))
4595 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4596 "restoring 64 bit addressing\n", ioc->name));
4597
4598 return 0;
4599
4600out_fail:
4601
4602 if (ioc->alloc != NULL) {
4603 sz = ioc->alloc_sz;
4604 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->alloc,
4605 ioc->alloc_dma);
4606 ioc->reply_frames = NULL;
4607 ioc->req_frames = NULL;
4608 ioc->alloc_total -= sz;
4609 }
4610 if (ioc->sense_buf_pool != NULL) {
4611 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4612 dma_free_coherent(&ioc->pcidev->dev, sz, ioc->sense_buf_pool,
4613 ioc->sense_buf_pool_dma);
4614 ioc->sense_buf_pool = NULL;
4615 }
4616
4617 if (dma_mask == DMA_BIT_MASK(35) && !dma_set_mask(&ioc->pcidev->dev,
4618 DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&ioc->pcidev->dev,
4619 DMA_BIT_MASK(64)))
4620 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4621 "restoring 64 bit addressing\n", ioc->name));
4622
4623 return -1;
4624}
4625
4626/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4627/**
4628 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4629 * from IOC via doorbell handshake method.
4630 * @ioc: Pointer to MPT_ADAPTER structure
4631 * @reqBytes: Size of the request in bytes
4632 * @req: Pointer to MPT request frame
4633 * @replyBytes: Expected size of the reply in bytes
4634 * @u16reply: Pointer to area where reply should be written
4635 * @maxwait: Max wait time for a reply (in seconds)
4636 * @sleepFlag: Specifies whether the process can sleep
4637 *
4638 * NOTES: It is the callers responsibility to byte-swap fields in the
4639 * request which are greater than 1 byte in size. It is also the
4640 * callers responsibility to byte-swap response fields which are
4641 * greater than 1 byte in size.
4642 *
4643 * Returns 0 for success, non-zero for failure.
4644 */
4645static int
4646mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4647 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4648{
4649 MPIDefaultReply_t *mptReply;
4650 int failcnt = 0;
4651 int t;
4652
4653 /*
4654 * Get ready to cache a handshake reply
4655 */
4656 ioc->hs_reply_idx = 0;
4657 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4658 mptReply->MsgLength = 0;
4659
4660 /*
4661 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4662 * then tell IOC that we want to handshake a request of N words.
4663 * (WRITE u32val to Doorbell reg).
4664 */
4665 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4666 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4667 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4668 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4669
4670 /*
4671 * Wait for IOC's doorbell handshake int
4672 */
4673 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4674 failcnt++;
4675
4676 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4677 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4678
4679 /* Read doorbell and check for active bit */
4680 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4681 return -1;
4682
4683 /*
4684 * Clear doorbell int (WRITE 0 to IntStatus reg),
4685 * then wait for IOC to ACKnowledge that it's ready for
4686 * our handshake request.
4687 */
4688 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4689 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4690 failcnt++;
4691
4692 if (!failcnt) {
4693 int ii;
4694 u8 *req_as_bytes = (u8 *) req;
4695
4696 /*
4697 * Stuff request words via doorbell handshake,
4698 * with ACK from IOC for each.
4699 */
4700 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4701 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4702 (req_as_bytes[(ii*4) + 1] << 8) |
4703 (req_as_bytes[(ii*4) + 2] << 16) |
4704 (req_as_bytes[(ii*4) + 3] << 24));
4705
4706 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4707 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4708 failcnt++;
4709 }
4710
4711 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4712 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4713
4714 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4715 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4716
4717 /*
4718 * Wait for completion of doorbell handshake reply from the IOC
4719 */
4720 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4721 failcnt++;
4722
4723 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4724 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4725
4726 /*
4727 * Copy out the cached reply...
4728 */
4729 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4730 u16reply[ii] = ioc->hs_reply[ii];
4731 } else {
4732 return -99;
4733 }
4734
4735 return -failcnt;
4736}
4737
4738/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4739/**
4740 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4741 * @ioc: Pointer to MPT_ADAPTER structure
4742 * @howlong: How long to wait (in seconds)
4743 * @sleepFlag: Specifies whether the process can sleep
4744 *
4745 * This routine waits (up to ~2 seconds max) for IOC doorbell
4746 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4747 * bit in its IntStatus register being clear.
4748 *
4749 * Returns a negative value on failure, else wait loop count.
4750 */
4751static int
4752WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4753{
4754 int cntdn;
4755 int count = 0;
4756 u32 intstat=0;
4757
4758 cntdn = 1000 * howlong;
4759
4760 if (sleepFlag == CAN_SLEEP) {
4761 while (--cntdn) {
4762 msleep (1);
4763 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4764 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4765 break;
4766 count++;
4767 }
4768 } else {
4769 while (--cntdn) {
4770 udelay (1000);
4771 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4772 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4773 break;
4774 count++;
4775 }
4776 }
4777
4778 if (cntdn) {
4779 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4780 ioc->name, count));
4781 return count;
4782 }
4783
4784 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4785 ioc->name, count, intstat);
4786 return -1;
4787}
4788
4789/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4790/**
4791 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4792 * @ioc: Pointer to MPT_ADAPTER structure
4793 * @howlong: How long to wait (in seconds)
4794 * @sleepFlag: Specifies whether the process can sleep
4795 *
4796 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4797 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4798 *
4799 * Returns a negative value on failure, else wait loop count.
4800 */
4801static int
4802WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4803{
4804 int cntdn;
4805 int count = 0;
4806 u32 intstat=0;
4807
4808 cntdn = 1000 * howlong;
4809 if (sleepFlag == CAN_SLEEP) {
4810 while (--cntdn) {
4811 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4812 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4813 break;
4814 msleep(1);
4815 count++;
4816 }
4817 } else {
4818 while (--cntdn) {
4819 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4820 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4821 break;
4822 udelay (1000);
4823 count++;
4824 }
4825 }
4826
4827 if (cntdn) {
4828 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4829 ioc->name, count, howlong));
4830 return count;
4831 }
4832
4833 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4834 ioc->name, count, intstat);
4835 return -1;
4836}
4837
4838/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4839/**
4840 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4841 * @ioc: Pointer to MPT_ADAPTER structure
4842 * @howlong: How long to wait (in seconds)
4843 * @sleepFlag: Specifies whether the process can sleep
4844 *
4845 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4846 * Reply is cached to IOC private area large enough to hold a maximum
4847 * of 128 bytes of reply data.
4848 *
4849 * Returns a negative value on failure, else size of reply in WORDS.
4850 */
4851static int
4852WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4853{
4854 int u16cnt = 0;
4855 int failcnt = 0;
4856 int t;
4857 u16 *hs_reply = ioc->hs_reply;
4858 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4859 u16 hword;
4860
4861 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4862
4863 /*
4864 * Get first two u16's so we can look at IOC's intended reply MsgLength
4865 */
4866 u16cnt=0;
4867 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4868 failcnt++;
4869 } else {
4870 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4871 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4872 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4873 failcnt++;
4874 else {
4875 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4876 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4877 }
4878 }
4879
4880 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4881 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4882 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4883
4884 /*
4885 * If no error (and IOC said MsgLength is > 0), piece together
4886 * reply 16 bits at a time.
4887 */
4888 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4889 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4890 failcnt++;
4891 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4892 /* don't overflow our IOC hs_reply[] buffer! */
4893 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4894 hs_reply[u16cnt] = hword;
4895 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4896 }
4897
4898 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4899 failcnt++;
4900 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4901
4902 if (failcnt) {
4903 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4904 ioc->name);
4905 return -failcnt;
4906 }
4907#if 0
4908 else if (u16cnt != (2 * mptReply->MsgLength)) {
4909 return -101;
4910 }
4911 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4912 return -102;
4913 }
4914#endif
4915
4916 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4917 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4918
4919 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4920 ioc->name, t, u16cnt/2));
4921 return u16cnt/2;
4922}
4923
4924/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4925/**
4926 * GetLanConfigPages - Fetch LANConfig pages.
4927 * @ioc: Pointer to MPT_ADAPTER structure
4928 *
4929 * Return: 0 for success
4930 * -ENOMEM if no memory available
4931 * -EPERM if not allowed due to ISR context
4932 * -EAGAIN if no msg frames currently available
4933 * -EFAULT for non-successful reply or no reply (timeout)
4934 */
4935static int
4936GetLanConfigPages(MPT_ADAPTER *ioc)
4937{
4938 ConfigPageHeader_t hdr;
4939 CONFIGPARMS cfg;
4940 LANPage0_t *ppage0_alloc;
4941 dma_addr_t page0_dma;
4942 LANPage1_t *ppage1_alloc;
4943 dma_addr_t page1_dma;
4944 int rc = 0;
4945 int data_sz;
4946 int copy_sz;
4947
4948 /* Get LAN Page 0 header */
4949 hdr.PageVersion = 0;
4950 hdr.PageLength = 0;
4951 hdr.PageNumber = 0;
4952 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4953 cfg.cfghdr.hdr = &hdr;
4954 cfg.physAddr = -1;
4955 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4956 cfg.dir = 0;
4957 cfg.pageAddr = 0;
4958 cfg.timeout = 0;
4959
4960 if ((rc = mpt_config(ioc, &cfg)) != 0)
4961 return rc;
4962
4963 if (hdr.PageLength > 0) {
4964 data_sz = hdr.PageLength * 4;
4965 ppage0_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
4966 &page0_dma, GFP_KERNEL);
4967 rc = -ENOMEM;
4968 if (ppage0_alloc) {
4969 memset((u8 *)ppage0_alloc, 0, data_sz);
4970 cfg.physAddr = page0_dma;
4971 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4972
4973 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4974 /* save the data */
4975 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4976 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4977
4978 }
4979
4980 dma_free_coherent(&ioc->pcidev->dev, data_sz,
4981 (u8 *)ppage0_alloc, page0_dma);
4982
4983 /* FIXME!
4984 * Normalize endianness of structure data,
4985 * by byte-swapping all > 1 byte fields!
4986 */
4987
4988 }
4989
4990 if (rc)
4991 return rc;
4992 }
4993
4994 /* Get LAN Page 1 header */
4995 hdr.PageVersion = 0;
4996 hdr.PageLength = 0;
4997 hdr.PageNumber = 1;
4998 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4999 cfg.cfghdr.hdr = &hdr;
5000 cfg.physAddr = -1;
5001 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5002 cfg.dir = 0;
5003 cfg.pageAddr = 0;
5004
5005 if ((rc = mpt_config(ioc, &cfg)) != 0)
5006 return rc;
5007
5008 if (hdr.PageLength == 0)
5009 return 0;
5010
5011 data_sz = hdr.PageLength * 4;
5012 rc = -ENOMEM;
5013 ppage1_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
5014 &page1_dma, GFP_KERNEL);
5015 if (ppage1_alloc) {
5016 memset((u8 *)ppage1_alloc, 0, data_sz);
5017 cfg.physAddr = page1_dma;
5018 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5019
5020 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5021 /* save the data */
5022 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5023 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5024 }
5025
5026 dma_free_coherent(&ioc->pcidev->dev, data_sz,
5027 (u8 *)ppage1_alloc, page1_dma);
5028
5029 /* FIXME!
5030 * Normalize endianness of structure data,
5031 * by byte-swapping all > 1 byte fields!
5032 */
5033
5034 }
5035
5036 return rc;
5037}
5038
5039/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5040/**
5041 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5042 * @ioc: Pointer to MPT_ADAPTER structure
5043 * @persist_opcode: see below
5044 *
5045 * =============================== ======================================
5046 * MPI_SAS_OP_CLEAR_NOT_PRESENT Free all persist TargetID mappings for
5047 * devices not currently present.
5048 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT Clear al persist TargetID mappings
5049 * =============================== ======================================
5050 *
5051 * NOTE: Don't use not this function during interrupt time.
5052 *
5053 * Returns 0 for success, non-zero error
5054 */
5055
5056/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5057int
5058mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5059{
5060 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5061 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5062 MPT_FRAME_HDR *mf = NULL;
5063 MPIHeader_t *mpi_hdr;
5064 int ret = 0;
5065 unsigned long timeleft;
5066
5067 mutex_lock(&ioc->mptbase_cmds.mutex);
5068
5069 /* init the internal cmd struct */
5070 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5071 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5072
5073 /* insure garbage is not sent to fw */
5074 switch(persist_opcode) {
5075
5076 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5077 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5078 break;
5079
5080 default:
5081 ret = -1;
5082 goto out;
5083 }
5084
5085 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5086 __func__, persist_opcode);
5087
5088 /* Get a MF for this command.
5089 */
5090 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5091 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5092 ret = -1;
5093 goto out;
5094 }
5095
5096 mpi_hdr = (MPIHeader_t *) mf;
5097 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5098 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5099 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5100 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5101 sasIoUnitCntrReq->Operation = persist_opcode;
5102
5103 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5104 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5105 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5106 ret = -ETIME;
5107 printk(KERN_DEBUG "%s: failed\n", __func__);
5108 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5109 goto out;
5110 if (!timeleft) {
5111 printk(MYIOC_s_WARN_FMT
5112 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5113 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5114 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5115 mpt_free_msg_frame(ioc, mf);
5116 }
5117 goto out;
5118 }
5119
5120 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5121 ret = -1;
5122 goto out;
5123 }
5124
5125 sasIoUnitCntrReply =
5126 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5127 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5128 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5129 __func__, sasIoUnitCntrReply->IOCStatus,
5130 sasIoUnitCntrReply->IOCLogInfo);
5131 printk(KERN_DEBUG "%s: failed\n", __func__);
5132 ret = -1;
5133 } else
5134 printk(KERN_DEBUG "%s: success\n", __func__);
5135 out:
5136
5137 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5138 mutex_unlock(&ioc->mptbase_cmds.mutex);
5139 return ret;
5140}
5141
5142/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5143
5144static void
5145mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5146 MpiEventDataRaid_t * pRaidEventData)
5147{
5148 int volume;
5149 int reason;
5150 int disk;
5151 int status;
5152 int flags;
5153 int state;
5154
5155 volume = pRaidEventData->VolumeID;
5156 reason = pRaidEventData->ReasonCode;
5157 disk = pRaidEventData->PhysDiskNum;
5158 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5159 flags = (status >> 0) & 0xff;
5160 state = (status >> 8) & 0xff;
5161
5162 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5163 return;
5164 }
5165
5166 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5167 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5168 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5169 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5170 ioc->name, disk, volume);
5171 } else {
5172 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5173 ioc->name, volume);
5174 }
5175
5176 switch(reason) {
5177 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5178 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5179 ioc->name);
5180 break;
5181
5182 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5183
5184 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5185 ioc->name);
5186 break;
5187
5188 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5189 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5190 ioc->name);
5191 break;
5192
5193 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5194 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5195 ioc->name,
5196 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5197 ? "optimal"
5198 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5199 ? "degraded"
5200 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5201 ? "failed"
5202 : "state unknown",
5203 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5204 ? ", enabled" : "",
5205 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5206 ? ", quiesced" : "",
5207 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5208 ? ", resync in progress" : "" );
5209 break;
5210
5211 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5212 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5213 ioc->name, disk);
5214 break;
5215
5216 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5217 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5218 ioc->name);
5219 break;
5220
5221 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5222 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5223 ioc->name);
5224 break;
5225
5226 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5227 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5228 ioc->name);
5229 break;
5230
5231 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5232 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5233 ioc->name,
5234 state == MPI_PHYSDISK0_STATUS_ONLINE
5235 ? "online"
5236 : state == MPI_PHYSDISK0_STATUS_MISSING
5237 ? "missing"
5238 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5239 ? "not compatible"
5240 : state == MPI_PHYSDISK0_STATUS_FAILED
5241 ? "failed"
5242 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5243 ? "initializing"
5244 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5245 ? "offline requested"
5246 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5247 ? "failed requested"
5248 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5249 ? "offline"
5250 : "state unknown",
5251 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5252 ? ", out of sync" : "",
5253 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5254 ? ", quiesced" : "" );
5255 break;
5256
5257 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5258 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5259 ioc->name, disk);
5260 break;
5261
5262 case MPI_EVENT_RAID_RC_SMART_DATA:
5263 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5264 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5265 break;
5266
5267 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5268 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5269 ioc->name, disk);
5270 break;
5271 }
5272}
5273
5274/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5275/**
5276 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5277 * @ioc: Pointer to MPT_ADAPTER structure
5278 *
5279 * Returns: 0 for success
5280 * -ENOMEM if no memory available
5281 * -EPERM if not allowed due to ISR context
5282 * -EAGAIN if no msg frames currently available
5283 * -EFAULT for non-successful reply or no reply (timeout)
5284 */
5285static int
5286GetIoUnitPage2(MPT_ADAPTER *ioc)
5287{
5288 ConfigPageHeader_t hdr;
5289 CONFIGPARMS cfg;
5290 IOUnitPage2_t *ppage_alloc;
5291 dma_addr_t page_dma;
5292 int data_sz;
5293 int rc;
5294
5295 /* Get the page header */
5296 hdr.PageVersion = 0;
5297 hdr.PageLength = 0;
5298 hdr.PageNumber = 2;
5299 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5300 cfg.cfghdr.hdr = &hdr;
5301 cfg.physAddr = -1;
5302 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5303 cfg.dir = 0;
5304 cfg.pageAddr = 0;
5305 cfg.timeout = 0;
5306
5307 if ((rc = mpt_config(ioc, &cfg)) != 0)
5308 return rc;
5309
5310 if (hdr.PageLength == 0)
5311 return 0;
5312
5313 /* Read the config page */
5314 data_sz = hdr.PageLength * 4;
5315 rc = -ENOMEM;
5316 ppage_alloc = dma_alloc_coherent(&ioc->pcidev->dev, data_sz,
5317 &page_dma, GFP_KERNEL);
5318 if (ppage_alloc) {
5319 memset((u8 *)ppage_alloc, 0, data_sz);
5320 cfg.physAddr = page_dma;
5321 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5322
5323 /* If Good, save data */
5324 if ((rc = mpt_config(ioc, &cfg)) == 0)
5325 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5326
5327 dma_free_coherent(&ioc->pcidev->dev, data_sz,
5328 (u8 *)ppage_alloc, page_dma);
5329 }
5330
5331 return rc;
5332}
5333
5334/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5335/**
5336 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5337 * @ioc: Pointer to a Adapter Strucutre
5338 * @portnum: IOC port number
5339 *
5340 * Return: -EFAULT if read of config page header fails
5341 * or if no nvram
5342 * If read of SCSI Port Page 0 fails,
5343 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5344 * Adapter settings: async, narrow
5345 * Return 1
5346 * If read of SCSI Port Page 2 fails,
5347 * Adapter settings valid
5348 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5349 * Return 1
5350 * Else
5351 * Both valid
5352 * Return 0
5353 * CHECK - what type of locking mechanisms should be used????
5354 */
5355static int
5356mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5357{
5358 u8 *pbuf;
5359 dma_addr_t buf_dma;
5360 CONFIGPARMS cfg;
5361 ConfigPageHeader_t header;
5362 int ii;
5363 int data, rc = 0;
5364
5365 /* Allocate memory
5366 */
5367 if (!ioc->spi_data.nvram) {
5368 int sz;
5369 u8 *mem;
5370 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5371 mem = kmalloc(sz, GFP_ATOMIC);
5372 if (mem == NULL)
5373 return -EFAULT;
5374
5375 ioc->spi_data.nvram = (int *) mem;
5376
5377 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5378 ioc->name, ioc->spi_data.nvram, sz));
5379 }
5380
5381 /* Invalidate NVRAM information
5382 */
5383 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5384 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5385 }
5386
5387 /* Read SPP0 header, allocate memory, then read page.
5388 */
5389 header.PageVersion = 0;
5390 header.PageLength = 0;
5391 header.PageNumber = 0;
5392 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5393 cfg.cfghdr.hdr = &header;
5394 cfg.physAddr = -1;
5395 cfg.pageAddr = portnum;
5396 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5397 cfg.dir = 0;
5398 cfg.timeout = 0; /* use default */
5399 if (mpt_config(ioc, &cfg) != 0)
5400 return -EFAULT;
5401
5402 if (header.PageLength > 0) {
5403 pbuf = dma_alloc_coherent(&ioc->pcidev->dev,
5404 header.PageLength * 4, &buf_dma,
5405 GFP_KERNEL);
5406 if (pbuf) {
5407 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5408 cfg.physAddr = buf_dma;
5409 if (mpt_config(ioc, &cfg) != 0) {
5410 ioc->spi_data.maxBusWidth = MPT_NARROW;
5411 ioc->spi_data.maxSyncOffset = 0;
5412 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5413 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5414 rc = 1;
5415 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5416 "Unable to read PortPage0 minSyncFactor=%x\n",
5417 ioc->name, ioc->spi_data.minSyncFactor));
5418 } else {
5419 /* Save the Port Page 0 data
5420 */
5421 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5422 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5423 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5424
5425 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5426 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5427 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5428 "noQas due to Capabilities=%x\n",
5429 ioc->name, pPP0->Capabilities));
5430 }
5431 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5432 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5433 if (data) {
5434 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5435 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5436 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5437 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5438 "PortPage0 minSyncFactor=%x\n",
5439 ioc->name, ioc->spi_data.minSyncFactor));
5440 } else {
5441 ioc->spi_data.maxSyncOffset = 0;
5442 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5443 }
5444
5445 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5446
5447 /* Update the minSyncFactor based on bus type.
5448 */
5449 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5450 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5451
5452 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5453 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5454 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5455 "HVD or SE detected, minSyncFactor=%x\n",
5456 ioc->name, ioc->spi_data.minSyncFactor));
5457 }
5458 }
5459 }
5460 if (pbuf) {
5461 dma_free_coherent(&ioc->pcidev->dev,
5462 header.PageLength * 4, pbuf,
5463 buf_dma);
5464 }
5465 }
5466 }
5467
5468 /* SCSI Port Page 2 - Read the header then the page.
5469 */
5470 header.PageVersion = 0;
5471 header.PageLength = 0;
5472 header.PageNumber = 2;
5473 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5474 cfg.cfghdr.hdr = &header;
5475 cfg.physAddr = -1;
5476 cfg.pageAddr = portnum;
5477 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5478 cfg.dir = 0;
5479 if (mpt_config(ioc, &cfg) != 0)
5480 return -EFAULT;
5481
5482 if (header.PageLength > 0) {
5483 /* Allocate memory and read SCSI Port Page 2
5484 */
5485 pbuf = dma_alloc_coherent(&ioc->pcidev->dev,
5486 header.PageLength * 4, &buf_dma,
5487 GFP_KERNEL);
5488 if (pbuf) {
5489 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5490 cfg.physAddr = buf_dma;
5491 if (mpt_config(ioc, &cfg) != 0) {
5492 /* Nvram data is left with INVALID mark
5493 */
5494 rc = 1;
5495 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5496
5497 /* This is an ATTO adapter, read Page2 accordingly
5498 */
5499 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5500 ATTODeviceInfo_t *pdevice = NULL;
5501 u16 ATTOFlags;
5502
5503 /* Save the Port Page 2 data
5504 * (reformat into a 32bit quantity)
5505 */
5506 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5507 pdevice = &pPP2->DeviceSettings[ii];
5508 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5509 data = 0;
5510
5511 /* Translate ATTO device flags to LSI format
5512 */
5513 if (ATTOFlags & ATTOFLAG_DISC)
5514 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5515 if (ATTOFlags & ATTOFLAG_ID_ENB)
5516 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5517 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5518 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5519 if (ATTOFlags & ATTOFLAG_TAGGED)
5520 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5521 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5522 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5523
5524 data = (data << 16) | (pdevice->Period << 8) | 10;
5525 ioc->spi_data.nvram[ii] = data;
5526 }
5527 } else {
5528 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5529 MpiDeviceInfo_t *pdevice = NULL;
5530
5531 /*
5532 * Save "Set to Avoid SCSI Bus Resets" flag
5533 */
5534 ioc->spi_data.bus_reset =
5535 (le32_to_cpu(pPP2->PortFlags) &
5536 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5537 0 : 1 ;
5538
5539 /* Save the Port Page 2 data
5540 * (reformat into a 32bit quantity)
5541 */
5542 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5543 ioc->spi_data.PortFlags = data;
5544 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5545 pdevice = &pPP2->DeviceSettings[ii];
5546 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5547 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5548 ioc->spi_data.nvram[ii] = data;
5549 }
5550 }
5551
5552 dma_free_coherent(&ioc->pcidev->dev,
5553 header.PageLength * 4, pbuf,
5554 buf_dma);
5555 }
5556 }
5557
5558 /* Update Adapter limits with those from NVRAM
5559 * Comment: Don't need to do this. Target performance
5560 * parameters will never exceed the adapters limits.
5561 */
5562
5563 return rc;
5564}
5565
5566/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5567/**
5568 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5569 * @ioc: Pointer to a Adapter Strucutre
5570 * @portnum: IOC port number
5571 *
5572 * Return: -EFAULT if read of config page header fails
5573 * or 0 if success.
5574 */
5575static int
5576mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5577{
5578 CONFIGPARMS cfg;
5579 ConfigPageHeader_t header;
5580
5581 /* Read the SCSI Device Page 1 header
5582 */
5583 header.PageVersion = 0;
5584 header.PageLength = 0;
5585 header.PageNumber = 1;
5586 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5587 cfg.cfghdr.hdr = &header;
5588 cfg.physAddr = -1;
5589 cfg.pageAddr = portnum;
5590 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5591 cfg.dir = 0;
5592 cfg.timeout = 0;
5593 if (mpt_config(ioc, &cfg) != 0)
5594 return -EFAULT;
5595
5596 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5597 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5598
5599 header.PageVersion = 0;
5600 header.PageLength = 0;
5601 header.PageNumber = 0;
5602 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5603 if (mpt_config(ioc, &cfg) != 0)
5604 return -EFAULT;
5605
5606 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5607 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5608
5609 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5610 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5611
5612 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5613 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5614 return 0;
5615}
5616
5617/**
5618 * mpt_inactive_raid_list_free - This clears this link list.
5619 * @ioc : pointer to per adapter structure
5620 **/
5621static void
5622mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5623{
5624 struct inactive_raid_component_info *component_info, *pNext;
5625
5626 if (list_empty(&ioc->raid_data.inactive_list))
5627 return;
5628
5629 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5630 list_for_each_entry_safe(component_info, pNext,
5631 &ioc->raid_data.inactive_list, list) {
5632 list_del(&component_info->list);
5633 kfree(component_info);
5634 }
5635 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5636}
5637
5638/**
5639 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5640 *
5641 * @ioc : pointer to per adapter structure
5642 * @channel : volume channel
5643 * @id : volume target id
5644 **/
5645static void
5646mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5647{
5648 CONFIGPARMS cfg;
5649 ConfigPageHeader_t hdr;
5650 dma_addr_t dma_handle;
5651 pRaidVolumePage0_t buffer = NULL;
5652 int i;
5653 RaidPhysDiskPage0_t phys_disk;
5654 struct inactive_raid_component_info *component_info;
5655 int handle_inactive_volumes;
5656
5657 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5658 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5659 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5660 cfg.pageAddr = (channel << 8) + id;
5661 cfg.cfghdr.hdr = &hdr;
5662 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5663
5664 if (mpt_config(ioc, &cfg) != 0)
5665 goto out;
5666
5667 if (!hdr.PageLength)
5668 goto out;
5669
5670 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5671 &dma_handle, GFP_KERNEL);
5672
5673 if (!buffer)
5674 goto out;
5675
5676 cfg.physAddr = dma_handle;
5677 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5678
5679 if (mpt_config(ioc, &cfg) != 0)
5680 goto out;
5681
5682 if (!buffer->NumPhysDisks)
5683 goto out;
5684
5685 handle_inactive_volumes =
5686 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5687 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5688 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5689 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5690
5691 if (!handle_inactive_volumes)
5692 goto out;
5693
5694 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5695 for (i = 0; i < buffer->NumPhysDisks; i++) {
5696 if(mpt_raid_phys_disk_pg0(ioc,
5697 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5698 continue;
5699
5700 if ((component_info = kmalloc(sizeof (*component_info),
5701 GFP_KERNEL)) == NULL)
5702 continue;
5703
5704 component_info->volumeID = id;
5705 component_info->volumeBus = channel;
5706 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5707 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5708 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5709 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5710
5711 list_add_tail(&component_info->list,
5712 &ioc->raid_data.inactive_list);
5713 }
5714 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5715
5716 out:
5717 if (buffer)
5718 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5719 buffer, dma_handle);
5720}
5721
5722/**
5723 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5724 * @ioc: Pointer to a Adapter Structure
5725 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5726 * @phys_disk: requested payload data returned
5727 *
5728 * Return:
5729 * 0 on success
5730 * -EFAULT if read of config page header fails or data pointer not NULL
5731 * -ENOMEM if pci_alloc failed
5732 **/
5733int
5734mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5735 RaidPhysDiskPage0_t *phys_disk)
5736{
5737 CONFIGPARMS cfg;
5738 ConfigPageHeader_t hdr;
5739 dma_addr_t dma_handle;
5740 pRaidPhysDiskPage0_t buffer = NULL;
5741 int rc;
5742
5743 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5744 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5745 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5746
5747 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5748 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5749 cfg.cfghdr.hdr = &hdr;
5750 cfg.physAddr = -1;
5751 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5752
5753 if (mpt_config(ioc, &cfg) != 0) {
5754 rc = -EFAULT;
5755 goto out;
5756 }
5757
5758 if (!hdr.PageLength) {
5759 rc = -EFAULT;
5760 goto out;
5761 }
5762
5763 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5764 &dma_handle, GFP_KERNEL);
5765
5766 if (!buffer) {
5767 rc = -ENOMEM;
5768 goto out;
5769 }
5770
5771 cfg.physAddr = dma_handle;
5772 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5773 cfg.pageAddr = phys_disk_num;
5774
5775 if (mpt_config(ioc, &cfg) != 0) {
5776 rc = -EFAULT;
5777 goto out;
5778 }
5779
5780 rc = 0;
5781 memcpy(phys_disk, buffer, sizeof(*buffer));
5782 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5783
5784 out:
5785
5786 if (buffer)
5787 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5788 buffer, dma_handle);
5789
5790 return rc;
5791}
5792
5793/**
5794 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5795 * @ioc: Pointer to a Adapter Structure
5796 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5797 *
5798 * Return:
5799 * returns number paths
5800 **/
5801int
5802mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5803{
5804 CONFIGPARMS cfg;
5805 ConfigPageHeader_t hdr;
5806 dma_addr_t dma_handle;
5807 pRaidPhysDiskPage1_t buffer = NULL;
5808 int rc;
5809
5810 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5811 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5812
5813 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5814 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5815 hdr.PageNumber = 1;
5816 cfg.cfghdr.hdr = &hdr;
5817 cfg.physAddr = -1;
5818 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5819
5820 if (mpt_config(ioc, &cfg) != 0) {
5821 rc = 0;
5822 goto out;
5823 }
5824
5825 if (!hdr.PageLength) {
5826 rc = 0;
5827 goto out;
5828 }
5829
5830 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5831 &dma_handle, GFP_KERNEL);
5832
5833 if (!buffer) {
5834 rc = 0;
5835 goto out;
5836 }
5837
5838 cfg.physAddr = dma_handle;
5839 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5840 cfg.pageAddr = phys_disk_num;
5841
5842 if (mpt_config(ioc, &cfg) != 0) {
5843 rc = 0;
5844 goto out;
5845 }
5846
5847 rc = buffer->NumPhysDiskPaths;
5848 out:
5849
5850 if (buffer)
5851 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5852 buffer, dma_handle);
5853
5854 return rc;
5855}
5856EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5857
5858/**
5859 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5860 * @ioc: Pointer to a Adapter Structure
5861 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5862 * @phys_disk: requested payload data returned
5863 *
5864 * Return:
5865 * 0 on success
5866 * -EFAULT if read of config page header fails or data pointer not NULL
5867 * -ENOMEM if pci_alloc failed
5868 **/
5869int
5870mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5871 RaidPhysDiskPage1_t *phys_disk)
5872{
5873 CONFIGPARMS cfg;
5874 ConfigPageHeader_t hdr;
5875 dma_addr_t dma_handle;
5876 pRaidPhysDiskPage1_t buffer = NULL;
5877 int rc;
5878 int i;
5879 __le64 sas_address;
5880
5881 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5882 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5883 rc = 0;
5884
5885 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5886 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5887 hdr.PageNumber = 1;
5888 cfg.cfghdr.hdr = &hdr;
5889 cfg.physAddr = -1;
5890 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5891
5892 if (mpt_config(ioc, &cfg) != 0) {
5893 rc = -EFAULT;
5894 goto out;
5895 }
5896
5897 if (!hdr.PageLength) {
5898 rc = -EFAULT;
5899 goto out;
5900 }
5901
5902 buffer = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5903 &dma_handle, GFP_KERNEL);
5904
5905 if (!buffer) {
5906 rc = -ENOMEM;
5907 goto out;
5908 }
5909
5910 cfg.physAddr = dma_handle;
5911 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5912 cfg.pageAddr = phys_disk_num;
5913
5914 if (mpt_config(ioc, &cfg) != 0) {
5915 rc = -EFAULT;
5916 goto out;
5917 }
5918
5919 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5920 phys_disk->PhysDiskNum = phys_disk_num;
5921 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5922 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5923 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5924 phys_disk->Path[i].OwnerIdentifier =
5925 buffer->Path[i].OwnerIdentifier;
5926 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5927 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5928 sas_address = le64_to_cpu(sas_address);
5929 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5930 memcpy(&sas_address,
5931 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5932 sas_address = le64_to_cpu(sas_address);
5933 memcpy(&phys_disk->Path[i].OwnerWWID,
5934 &sas_address, sizeof(__le64));
5935 }
5936
5937 out:
5938
5939 if (buffer)
5940 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
5941 buffer, dma_handle);
5942
5943 return rc;
5944}
5945EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5946
5947
5948/**
5949 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5950 * @ioc: Pointer to a Adapter Strucutre
5951 *
5952 * Return:
5953 * 0 on success
5954 * -EFAULT if read of config page header fails or data pointer not NULL
5955 * -ENOMEM if pci_alloc failed
5956 **/
5957int
5958mpt_findImVolumes(MPT_ADAPTER *ioc)
5959{
5960 IOCPage2_t *pIoc2;
5961 u8 *mem;
5962 dma_addr_t ioc2_dma;
5963 CONFIGPARMS cfg;
5964 ConfigPageHeader_t header;
5965 int rc = 0;
5966 int iocpage2sz;
5967 int i;
5968
5969 if (!ioc->ir_firmware)
5970 return 0;
5971
5972 /* Free the old page
5973 */
5974 kfree(ioc->raid_data.pIocPg2);
5975 ioc->raid_data.pIocPg2 = NULL;
5976 mpt_inactive_raid_list_free(ioc);
5977
5978 /* Read IOCP2 header then the page.
5979 */
5980 header.PageVersion = 0;
5981 header.PageLength = 0;
5982 header.PageNumber = 2;
5983 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5984 cfg.cfghdr.hdr = &header;
5985 cfg.physAddr = -1;
5986 cfg.pageAddr = 0;
5987 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5988 cfg.dir = 0;
5989 cfg.timeout = 0;
5990 if (mpt_config(ioc, &cfg) != 0)
5991 return -EFAULT;
5992
5993 if (header.PageLength == 0)
5994 return -EFAULT;
5995
5996 iocpage2sz = header.PageLength * 4;
5997 pIoc2 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage2sz, &ioc2_dma,
5998 GFP_KERNEL);
5999 if (!pIoc2)
6000 return -ENOMEM;
6001
6002 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6003 cfg.physAddr = ioc2_dma;
6004 if (mpt_config(ioc, &cfg) != 0)
6005 goto out;
6006
6007 mem = kmemdup(pIoc2, iocpage2sz, GFP_KERNEL);
6008 if (!mem) {
6009 rc = -ENOMEM;
6010 goto out;
6011 }
6012
6013 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6014
6015 mpt_read_ioc_pg_3(ioc);
6016
6017 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6018 mpt_inactive_raid_volumes(ioc,
6019 pIoc2->RaidVolume[i].VolumeBus,
6020 pIoc2->RaidVolume[i].VolumeID);
6021
6022 out:
6023 dma_free_coherent(&ioc->pcidev->dev, iocpage2sz, pIoc2, ioc2_dma);
6024
6025 return rc;
6026}
6027
6028static int
6029mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6030{
6031 IOCPage3_t *pIoc3;
6032 u8 *mem;
6033 CONFIGPARMS cfg;
6034 ConfigPageHeader_t header;
6035 dma_addr_t ioc3_dma;
6036 int iocpage3sz = 0;
6037
6038 /* Free the old page
6039 */
6040 kfree(ioc->raid_data.pIocPg3);
6041 ioc->raid_data.pIocPg3 = NULL;
6042
6043 /* There is at least one physical disk.
6044 * Read and save IOC Page 3
6045 */
6046 header.PageVersion = 0;
6047 header.PageLength = 0;
6048 header.PageNumber = 3;
6049 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6050 cfg.cfghdr.hdr = &header;
6051 cfg.physAddr = -1;
6052 cfg.pageAddr = 0;
6053 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6054 cfg.dir = 0;
6055 cfg.timeout = 0;
6056 if (mpt_config(ioc, &cfg) != 0)
6057 return 0;
6058
6059 if (header.PageLength == 0)
6060 return 0;
6061
6062 /* Read Header good, alloc memory
6063 */
6064 iocpage3sz = header.PageLength * 4;
6065 pIoc3 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage3sz, &ioc3_dma,
6066 GFP_KERNEL);
6067 if (!pIoc3)
6068 return 0;
6069
6070 /* Read the Page and save the data
6071 * into malloc'd memory.
6072 */
6073 cfg.physAddr = ioc3_dma;
6074 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6075 if (mpt_config(ioc, &cfg) == 0) {
6076 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6077 if (mem) {
6078 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6079 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6080 }
6081 }
6082
6083 dma_free_coherent(&ioc->pcidev->dev, iocpage3sz, pIoc3, ioc3_dma);
6084
6085 return 0;
6086}
6087
6088static void
6089mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6090{
6091 IOCPage4_t *pIoc4;
6092 CONFIGPARMS cfg;
6093 ConfigPageHeader_t header;
6094 dma_addr_t ioc4_dma;
6095 int iocpage4sz;
6096
6097 /* Read and save IOC Page 4
6098 */
6099 header.PageVersion = 0;
6100 header.PageLength = 0;
6101 header.PageNumber = 4;
6102 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6103 cfg.cfghdr.hdr = &header;
6104 cfg.physAddr = -1;
6105 cfg.pageAddr = 0;
6106 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6107 cfg.dir = 0;
6108 cfg.timeout = 0;
6109 if (mpt_config(ioc, &cfg) != 0)
6110 return;
6111
6112 if (header.PageLength == 0)
6113 return;
6114
6115 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6116 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6117 pIoc4 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage4sz,
6118 &ioc4_dma, GFP_KERNEL);
6119 if (!pIoc4)
6120 return;
6121 ioc->alloc_total += iocpage4sz;
6122 } else {
6123 ioc4_dma = ioc->spi_data.IocPg4_dma;
6124 iocpage4sz = ioc->spi_data.IocPg4Sz;
6125 }
6126
6127 /* Read the Page into dma memory.
6128 */
6129 cfg.physAddr = ioc4_dma;
6130 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6131 if (mpt_config(ioc, &cfg) == 0) {
6132 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6133 ioc->spi_data.IocPg4_dma = ioc4_dma;
6134 ioc->spi_data.IocPg4Sz = iocpage4sz;
6135 } else {
6136 dma_free_coherent(&ioc->pcidev->dev, iocpage4sz, pIoc4,
6137 ioc4_dma);
6138 ioc->spi_data.pIocPg4 = NULL;
6139 ioc->alloc_total -= iocpage4sz;
6140 }
6141}
6142
6143static void
6144mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6145{
6146 IOCPage1_t *pIoc1;
6147 CONFIGPARMS cfg;
6148 ConfigPageHeader_t header;
6149 dma_addr_t ioc1_dma;
6150 int iocpage1sz = 0;
6151 u32 tmp;
6152
6153 /* Check the Coalescing Timeout in IOC Page 1
6154 */
6155 header.PageVersion = 0;
6156 header.PageLength = 0;
6157 header.PageNumber = 1;
6158 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6159 cfg.cfghdr.hdr = &header;
6160 cfg.physAddr = -1;
6161 cfg.pageAddr = 0;
6162 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6163 cfg.dir = 0;
6164 cfg.timeout = 0;
6165 if (mpt_config(ioc, &cfg) != 0)
6166 return;
6167
6168 if (header.PageLength == 0)
6169 return;
6170
6171 /* Read Header good, alloc memory
6172 */
6173 iocpage1sz = header.PageLength * 4;
6174 pIoc1 = dma_alloc_coherent(&ioc->pcidev->dev, iocpage1sz, &ioc1_dma,
6175 GFP_KERNEL);
6176 if (!pIoc1)
6177 return;
6178
6179 /* Read the Page and check coalescing timeout
6180 */
6181 cfg.physAddr = ioc1_dma;
6182 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6183 if (mpt_config(ioc, &cfg) == 0) {
6184
6185 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6186 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6187 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6188
6189 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6190 ioc->name, tmp));
6191
6192 if (tmp > MPT_COALESCING_TIMEOUT) {
6193 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6194
6195 /* Write NVRAM and current
6196 */
6197 cfg.dir = 1;
6198 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6199 if (mpt_config(ioc, &cfg) == 0) {
6200 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6201 ioc->name, MPT_COALESCING_TIMEOUT));
6202
6203 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6204 if (mpt_config(ioc, &cfg) == 0) {
6205 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6206 "Reset NVRAM Coalescing Timeout to = %d\n",
6207 ioc->name, MPT_COALESCING_TIMEOUT));
6208 } else {
6209 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6210 "Reset NVRAM Coalescing Timeout Failed\n",
6211 ioc->name));
6212 }
6213
6214 } else {
6215 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6216 "Reset of Current Coalescing Timeout Failed!\n",
6217 ioc->name));
6218 }
6219 }
6220
6221 } else {
6222 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6223 }
6224 }
6225
6226 dma_free_coherent(&ioc->pcidev->dev, iocpage1sz, pIoc1, ioc1_dma);
6227
6228 return;
6229}
6230
6231static void
6232mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6233{
6234 CONFIGPARMS cfg;
6235 ConfigPageHeader_t hdr;
6236 dma_addr_t buf_dma;
6237 ManufacturingPage0_t *pbuf = NULL;
6238
6239 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6240 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6241
6242 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6243 cfg.cfghdr.hdr = &hdr;
6244 cfg.physAddr = -1;
6245 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6246 cfg.timeout = 10;
6247
6248 if (mpt_config(ioc, &cfg) != 0)
6249 goto out;
6250
6251 if (!cfg.cfghdr.hdr->PageLength)
6252 goto out;
6253
6254 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6255 pbuf = dma_alloc_coherent(&ioc->pcidev->dev, hdr.PageLength * 4,
6256 &buf_dma, GFP_KERNEL);
6257 if (!pbuf)
6258 goto out;
6259
6260 cfg.physAddr = buf_dma;
6261
6262 if (mpt_config(ioc, &cfg) != 0)
6263 goto out;
6264
6265 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6266 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6267 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6268
6269out:
6270
6271 if (pbuf)
6272 dma_free_coherent(&ioc->pcidev->dev, hdr.PageLength * 4, pbuf,
6273 buf_dma);
6274}
6275
6276/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6277/**
6278 * SendEventNotification - Send EventNotification (on or off) request to adapter
6279 * @ioc: Pointer to MPT_ADAPTER structure
6280 * @EvSwitch: Event switch flags
6281 * @sleepFlag: Specifies whether the process can sleep
6282 */
6283static int
6284SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6285{
6286 EventNotification_t evn;
6287 MPIDefaultReply_t reply_buf;
6288
6289 memset(&evn, 0, sizeof(EventNotification_t));
6290 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6291
6292 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6293 evn.Switch = EvSwitch;
6294 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6295
6296 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6297 "Sending EventNotification (%d) request %p\n",
6298 ioc->name, EvSwitch, &evn));
6299
6300 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6301 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6302 sleepFlag);
6303}
6304
6305/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6306/**
6307 * SendEventAck - Send EventAck request to MPT adapter.
6308 * @ioc: Pointer to MPT_ADAPTER structure
6309 * @evnp: Pointer to original EventNotification request
6310 */
6311static int
6312SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6313{
6314 EventAck_t *pAck;
6315
6316 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6317 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6318 ioc->name, __func__));
6319 return -1;
6320 }
6321
6322 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6323
6324 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6325 pAck->ChainOffset = 0;
6326 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6327 pAck->MsgFlags = 0;
6328 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6329 pAck->Event = evnp->Event;
6330 pAck->EventContext = evnp->EventContext;
6331
6332 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6333
6334 return 0;
6335}
6336
6337/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6338/**
6339 * mpt_config - Generic function to issue config message
6340 * @ioc: Pointer to an adapter structure
6341 * @pCfg: Pointer to a configuration structure. Struct contains
6342 * action, page address, direction, physical address
6343 * and pointer to a configuration page header
6344 * Page header is updated.
6345 *
6346 * Returns 0 for success
6347 * -EAGAIN if no msg frames currently available
6348 * -EFAULT for non-successful reply or no reply (timeout)
6349 */
6350int
6351mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6352{
6353 Config_t *pReq;
6354 ConfigReply_t *pReply;
6355 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6356 MPT_FRAME_HDR *mf;
6357 int ii;
6358 int flagsLength;
6359 long timeout;
6360 int ret;
6361 u8 page_type = 0, extend_page;
6362 unsigned long timeleft;
6363 unsigned long flags;
6364 u8 issue_hard_reset = 0;
6365 u8 retry_count = 0;
6366
6367 might_sleep();
6368
6369 /* don't send a config page during diag reset */
6370 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6371 if (ioc->ioc_reset_in_progress) {
6372 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6373 "%s: busy with host reset\n", ioc->name, __func__));
6374 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6375 return -EBUSY;
6376 }
6377 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6378
6379 /* don't send if no chance of success */
6380 if (!ioc->active ||
6381 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6382 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6383 "%s: ioc not operational, %d, %xh\n",
6384 ioc->name, __func__, ioc->active,
6385 mpt_GetIocState(ioc, 0)));
6386 return -EFAULT;
6387 }
6388
6389 retry_config:
6390 mutex_lock(&ioc->mptbase_cmds.mutex);
6391 /* init the internal cmd struct */
6392 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6393 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6394
6395 /* Get and Populate a free Frame
6396 */
6397 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6398 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6399 "mpt_config: no msg frames!\n", ioc->name));
6400 ret = -EAGAIN;
6401 goto out;
6402 }
6403
6404 pReq = (Config_t *)mf;
6405 pReq->Action = pCfg->action;
6406 pReq->Reserved = 0;
6407 pReq->ChainOffset = 0;
6408 pReq->Function = MPI_FUNCTION_CONFIG;
6409
6410 /* Assume page type is not extended and clear "reserved" fields. */
6411 pReq->ExtPageLength = 0;
6412 pReq->ExtPageType = 0;
6413 pReq->MsgFlags = 0;
6414
6415 for (ii=0; ii < 8; ii++)
6416 pReq->Reserved2[ii] = 0;
6417
6418 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6419 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6420 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6421 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6422
6423 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6424 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6425 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6426 pReq->ExtPageType = pExtHdr->ExtPageType;
6427 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6428
6429 /* Page Length must be treated as a reserved field for the
6430 * extended header.
6431 */
6432 pReq->Header.PageLength = 0;
6433 }
6434
6435 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6436
6437 /* Add a SGE to the config request.
6438 */
6439 if (pCfg->dir)
6440 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6441 else
6442 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6443
6444 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6445 MPI_CONFIG_PAGETYPE_EXTENDED) {
6446 flagsLength |= pExtHdr->ExtPageLength * 4;
6447 page_type = pReq->ExtPageType;
6448 extend_page = 1;
6449 } else {
6450 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6451 page_type = pReq->Header.PageType;
6452 extend_page = 0;
6453 }
6454
6455 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6456 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6457 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6458
6459 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6460 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6461 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6462 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6463 timeout);
6464 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6465 ret = -ETIME;
6466 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6467 "Failed Sending Config request type 0x%x, page 0x%x,"
6468 " action %d, status %xh, time left %ld\n\n",
6469 ioc->name, page_type, pReq->Header.PageNumber,
6470 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6471 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6472 goto out;
6473 if (!timeleft) {
6474 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6475 if (ioc->ioc_reset_in_progress) {
6476 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6477 flags);
6478 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6479 " progress mpt_config timed out.!!\n",
6480 __func__, ioc->name);
6481 mutex_unlock(&ioc->mptbase_cmds.mutex);
6482 return -EFAULT;
6483 }
6484 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6485 issue_hard_reset = 1;
6486 }
6487 goto out;
6488 }
6489
6490 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6491 ret = -1;
6492 goto out;
6493 }
6494 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6495 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6496 if (ret == MPI_IOCSTATUS_SUCCESS) {
6497 if (extend_page) {
6498 pCfg->cfghdr.ehdr->ExtPageLength =
6499 le16_to_cpu(pReply->ExtPageLength);
6500 pCfg->cfghdr.ehdr->ExtPageType =
6501 pReply->ExtPageType;
6502 }
6503 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6504 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6505 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6506 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6507
6508 }
6509
6510 if (retry_count)
6511 printk(MYIOC_s_INFO_FMT "Retry completed "
6512 "ret=0x%x timeleft=%ld\n",
6513 ioc->name, ret, timeleft);
6514
6515 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6516 ret, le32_to_cpu(pReply->IOCLogInfo)));
6517
6518out:
6519
6520 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6521 mutex_unlock(&ioc->mptbase_cmds.mutex);
6522 if (issue_hard_reset) {
6523 issue_hard_reset = 0;
6524 printk(MYIOC_s_WARN_FMT
6525 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6526 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6527 if (retry_count == 0) {
6528 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6529 retry_count++;
6530 } else
6531 mpt_HardResetHandler(ioc, CAN_SLEEP);
6532
6533 mpt_free_msg_frame(ioc, mf);
6534 /* attempt one retry for a timed out command */
6535 if (retry_count < 2) {
6536 printk(MYIOC_s_INFO_FMT
6537 "Attempting Retry Config request"
6538 " type 0x%x, page 0x%x,"
6539 " action %d\n", ioc->name, page_type,
6540 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6541 retry_count++;
6542 goto retry_config;
6543 }
6544 }
6545 return ret;
6546
6547}
6548
6549/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6550/**
6551 * mpt_ioc_reset - Base cleanup for hard reset
6552 * @ioc: Pointer to the adapter structure
6553 * @reset_phase: Indicates pre- or post-reset functionality
6554 *
6555 * Remark: Frees resources with internally generated commands.
6556 */
6557static int
6558mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6559{
6560 switch (reset_phase) {
6561 case MPT_IOC_SETUP_RESET:
6562 ioc->taskmgmt_quiesce_io = 1;
6563 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6564 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6565 break;
6566 case MPT_IOC_PRE_RESET:
6567 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6568 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6569 break;
6570 case MPT_IOC_POST_RESET:
6571 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6572 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6573/* wake up mptbase_cmds */
6574 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6575 ioc->mptbase_cmds.status |=
6576 MPT_MGMT_STATUS_DID_IOCRESET;
6577 complete(&ioc->mptbase_cmds.done);
6578 }
6579/* wake up taskmgmt_cmds */
6580 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6581 ioc->taskmgmt_cmds.status |=
6582 MPT_MGMT_STATUS_DID_IOCRESET;
6583 complete(&ioc->taskmgmt_cmds.done);
6584 }
6585 break;
6586 default:
6587 break;
6588 }
6589
6590 return 1; /* currently means nothing really */
6591}
6592
6593
6594#ifdef CONFIG_PROC_FS /* { */
6595/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6596/*
6597 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6598 */
6599/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6600/**
6601 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6602 *
6603 * Returns 0 for success, non-zero for failure.
6604 */
6605static int
6606procmpt_create(void)
6607{
6608 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6609 if (mpt_proc_root_dir == NULL)
6610 return -ENOTDIR;
6611
6612 proc_create_single("summary", S_IRUGO, mpt_proc_root_dir,
6613 mpt_summary_proc_show);
6614 proc_create_single("version", S_IRUGO, mpt_proc_root_dir,
6615 mpt_version_proc_show);
6616 return 0;
6617}
6618
6619/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6620/**
6621 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6622 *
6623 * Returns 0 for success, non-zero for failure.
6624 */
6625static void
6626procmpt_destroy(void)
6627{
6628 remove_proc_entry("version", mpt_proc_root_dir);
6629 remove_proc_entry("summary", mpt_proc_root_dir);
6630 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6631}
6632
6633/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6634/*
6635 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6636 */
6637static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6638
6639static int mpt_summary_proc_show(struct seq_file *m, void *v)
6640{
6641 MPT_ADAPTER *ioc = m->private;
6642
6643 if (ioc) {
6644 seq_mpt_print_ioc_summary(ioc, m, 1);
6645 } else {
6646 list_for_each_entry(ioc, &ioc_list, list) {
6647 seq_mpt_print_ioc_summary(ioc, m, 1);
6648 }
6649 }
6650
6651 return 0;
6652}
6653
6654static int mpt_version_proc_show(struct seq_file *m, void *v)
6655{
6656 u8 cb_idx;
6657 int scsi, fc, sas, lan, ctl, targ;
6658 char *drvname;
6659
6660 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6661 seq_printf(m, " Fusion MPT base driver\n");
6662
6663 scsi = fc = sas = lan = ctl = targ = 0;
6664 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6665 drvname = NULL;
6666 if (MptCallbacks[cb_idx]) {
6667 switch (MptDriverClass[cb_idx]) {
6668 case MPTSPI_DRIVER:
6669 if (!scsi++) drvname = "SPI host";
6670 break;
6671 case MPTFC_DRIVER:
6672 if (!fc++) drvname = "FC host";
6673 break;
6674 case MPTSAS_DRIVER:
6675 if (!sas++) drvname = "SAS host";
6676 break;
6677 case MPTLAN_DRIVER:
6678 if (!lan++) drvname = "LAN";
6679 break;
6680 case MPTSTM_DRIVER:
6681 if (!targ++) drvname = "SCSI target";
6682 break;
6683 case MPTCTL_DRIVER:
6684 if (!ctl++) drvname = "ioctl";
6685 break;
6686 }
6687
6688 if (drvname)
6689 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6690 }
6691 }
6692
6693 return 0;
6694}
6695
6696static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6697{
6698 MPT_ADAPTER *ioc = m->private;
6699 char expVer[32];
6700 int sz;
6701 int p;
6702
6703 mpt_get_fw_exp_ver(expVer, ioc);
6704
6705 seq_printf(m, "%s:", ioc->name);
6706 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6707 seq_printf(m, " (f/w download boot flag set)");
6708// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6709// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6710
6711 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6712 ioc->facts.ProductID,
6713 ioc->prod_name);
6714 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6715 if (ioc->facts.FWImageSize)
6716 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6717 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6718 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6719 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6720
6721 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6722 ioc->facts.CurrentHostMfaHighAddr);
6723 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6724 ioc->facts.CurrentSenseBufferHighAddr);
6725
6726 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6727 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6728
6729 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6730 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6731 /*
6732 * Rounding UP to nearest 4-kB boundary here...
6733 */
6734 sz = (ioc->req_sz * ioc->req_depth) + 128;
6735 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6736 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6737 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6738 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6739 4*ioc->facts.RequestFrameSize,
6740 ioc->facts.GlobalCredits);
6741
6742 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6743 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6744 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6745 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6746 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6747 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6748 ioc->facts.CurReplyFrameSize,
6749 ioc->facts.ReplyQueueDepth);
6750
6751 seq_printf(m, " MaxDevices = %d\n",
6752 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6753 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6754
6755 /* per-port info */
6756 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6757 seq_printf(m, " PortNumber = %d (of %d)\n",
6758 p+1,
6759 ioc->facts.NumberOfPorts);
6760 if (ioc->bus_type == FC) {
6761 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6762 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6763 seq_printf(m, " LanAddr = %pMR\n", a);
6764 }
6765 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6766 ioc->fc_port_page0[p].WWNN.High,
6767 ioc->fc_port_page0[p].WWNN.Low,
6768 ioc->fc_port_page0[p].WWPN.High,
6769 ioc->fc_port_page0[p].WWPN.Low);
6770 }
6771 }
6772
6773 return 0;
6774}
6775#endif /* CONFIG_PROC_FS } */
6776
6777/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6778static void
6779mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6780{
6781 buf[0] ='\0';
6782 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6783 sprintf(buf, " (Exp %02d%02d)",
6784 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6785 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6786
6787 /* insider hack! */
6788 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6789 strcat(buf, " [MDBG]");
6790 }
6791}
6792
6793/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6794/**
6795 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6796 * @ioc: Pointer to MPT_ADAPTER structure
6797 * @buffer: Pointer to buffer where IOC summary info should be written
6798 * @size: Pointer to number of bytes we wrote (set by this routine)
6799 * @len: Offset at which to start writing in buffer
6800 * @showlan: Display LAN stuff?
6801 *
6802 * This routine writes (english readable) ASCII text, which represents
6803 * a summary of IOC information, to a buffer.
6804 */
6805void
6806mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6807{
6808 char expVer[32];
6809 int y;
6810
6811 mpt_get_fw_exp_ver(expVer, ioc);
6812
6813 /*
6814 * Shorter summary of attached ioc's...
6815 */
6816 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6817 ioc->name,
6818 ioc->prod_name,
6819 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6820 ioc->facts.FWVersion.Word,
6821 expVer,
6822 ioc->facts.NumberOfPorts,
6823 ioc->req_depth);
6824
6825 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6826 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6827 y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
6828 }
6829
6830 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6831
6832 if (!ioc->active)
6833 y += sprintf(buffer+len+y, " (disabled)");
6834
6835 y += sprintf(buffer+len+y, "\n");
6836
6837 *size = y;
6838}
6839
6840#ifdef CONFIG_PROC_FS
6841static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6842{
6843 char expVer[32];
6844
6845 mpt_get_fw_exp_ver(expVer, ioc);
6846
6847 /*
6848 * Shorter summary of attached ioc's...
6849 */
6850 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6851 ioc->name,
6852 ioc->prod_name,
6853 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6854 ioc->facts.FWVersion.Word,
6855 expVer,
6856 ioc->facts.NumberOfPorts,
6857 ioc->req_depth);
6858
6859 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6860 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6861 seq_printf(m, ", LanAddr=%pMR", a);
6862 }
6863
6864 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6865
6866 if (!ioc->active)
6867 seq_printf(m, " (disabled)");
6868
6869 seq_putc(m, '\n');
6870}
6871#endif
6872
6873/**
6874 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6875 * @ioc: Pointer to MPT_ADAPTER structure
6876 *
6877 * Returns 0 for SUCCESS or -1 if FAILED.
6878 *
6879 * If -1 is return, then it was not possible to set the flags
6880 **/
6881int
6882mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6883{
6884 unsigned long flags;
6885 int retval;
6886
6887 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6888 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6889 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6890 retval = -1;
6891 goto out;
6892 }
6893 retval = 0;
6894 ioc->taskmgmt_in_progress = 1;
6895 ioc->taskmgmt_quiesce_io = 1;
6896 if (ioc->alt_ioc) {
6897 ioc->alt_ioc->taskmgmt_in_progress = 1;
6898 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6899 }
6900 out:
6901 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6902 return retval;
6903}
6904EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6905
6906/**
6907 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6908 * @ioc: Pointer to MPT_ADAPTER structure
6909 *
6910 **/
6911void
6912mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6913{
6914 unsigned long flags;
6915
6916 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6917 ioc->taskmgmt_in_progress = 0;
6918 ioc->taskmgmt_quiesce_io = 0;
6919 if (ioc->alt_ioc) {
6920 ioc->alt_ioc->taskmgmt_in_progress = 0;
6921 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6922 }
6923 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6924}
6925EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6926
6927
6928/**
6929 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6930 * the kernel
6931 * @ioc: Pointer to MPT_ADAPTER structure
6932 *
6933 **/
6934void __noreturn
6935mpt_halt_firmware(MPT_ADAPTER *ioc)
6936{
6937 u32 ioc_raw_state;
6938
6939 ioc_raw_state = mpt_GetIocState(ioc, 0);
6940
6941 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6942 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6943 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6944 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6945 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6946 } else {
6947 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6948 panic("%s: Firmware is halted due to command timeout\n",
6949 ioc->name);
6950 }
6951}
6952EXPORT_SYMBOL(mpt_halt_firmware);
6953
6954/**
6955 * mpt_SoftResetHandler - Issues a less expensive reset
6956 * @ioc: Pointer to MPT_ADAPTER structure
6957 * @sleepFlag: Indicates if sleep or schedule must be called.
6958 *
6959 * Returns 0 for SUCCESS or -1 if FAILED.
6960 *
6961 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6962 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6963 * All posted buffers are freed, and event notification is turned off.
6964 * IOC doesn't reply to any outstanding request. This will transfer IOC
6965 * to READY state.
6966 **/
6967static int
6968mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
6969{
6970 int rc;
6971 int ii;
6972 u8 cb_idx;
6973 unsigned long flags;
6974 u32 ioc_state;
6975 unsigned long time_count;
6976
6977 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
6978 ioc->name));
6979
6980 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
6981
6982 if (mpt_fwfault_debug)
6983 mpt_halt_firmware(ioc);
6984
6985 if (ioc_state == MPI_IOC_STATE_FAULT ||
6986 ioc_state == MPI_IOC_STATE_RESET) {
6987 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6988 "skipping, either in FAULT or RESET state!\n", ioc->name));
6989 return -1;
6990 }
6991
6992 if (ioc->bus_type == FC) {
6993 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6994 "skipping, because the bus type is FC!\n", ioc->name));
6995 return -1;
6996 }
6997
6998 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6999 if (ioc->ioc_reset_in_progress) {
7000 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7001 return -1;
7002 }
7003 ioc->ioc_reset_in_progress = 1;
7004 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7005
7006 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7007 if (MptResetHandlers[cb_idx])
7008 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7009 }
7010
7011 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7012 if (ioc->taskmgmt_in_progress) {
7013 ioc->ioc_reset_in_progress = 0;
7014 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7015 return -1;
7016 }
7017 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7018 /* Disable reply interrupts (also blocks FreeQ) */
7019 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7020 ioc->active = 0;
7021 time_count = jiffies;
7022
7023 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7024
7025 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7026 if (MptResetHandlers[cb_idx])
7027 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7028 }
7029
7030 if (rc)
7031 goto out;
7032
7033 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7034 if (ioc_state != MPI_IOC_STATE_READY)
7035 goto out;
7036
7037 for (ii = 0; ii < 5; ii++) {
7038 /* Get IOC facts! Allow 5 retries */
7039 rc = GetIocFacts(ioc, sleepFlag,
7040 MPT_HOSTEVENT_IOC_RECOVER);
7041 if (rc == 0)
7042 break;
7043 if (sleepFlag == CAN_SLEEP)
7044 msleep(100);
7045 else
7046 mdelay(100);
7047 }
7048 if (ii == 5)
7049 goto out;
7050
7051 rc = PrimeIocFifos(ioc);
7052 if (rc != 0)
7053 goto out;
7054
7055 rc = SendIocInit(ioc, sleepFlag);
7056 if (rc != 0)
7057 goto out;
7058
7059 rc = SendEventNotification(ioc, 1, sleepFlag);
7060 if (rc != 0)
7061 goto out;
7062
7063 if (ioc->hard_resets < -1)
7064 ioc->hard_resets++;
7065
7066 /*
7067 * At this point, we know soft reset succeeded.
7068 */
7069
7070 ioc->active = 1;
7071 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7072
7073 out:
7074 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7075 ioc->ioc_reset_in_progress = 0;
7076 ioc->taskmgmt_quiesce_io = 0;
7077 ioc->taskmgmt_in_progress = 0;
7078 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7079
7080 if (ioc->active) { /* otherwise, hard reset coming */
7081 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7082 if (MptResetHandlers[cb_idx])
7083 mpt_signal_reset(cb_idx, ioc,
7084 MPT_IOC_POST_RESET);
7085 }
7086 }
7087
7088 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7089 "SoftResetHandler: completed (%d seconds): %s\n",
7090 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7091 ((rc == 0) ? "SUCCESS" : "FAILED")));
7092
7093 return rc;
7094}
7095
7096/**
7097 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7098 * @ioc: Pointer to MPT_ADAPTER structure
7099 * @sleepFlag: Indicates if sleep or schedule must be called.
7100 *
7101 * Returns 0 for SUCCESS or -1 if FAILED.
7102 * Try for softreset first, only if it fails go for expensive
7103 * HardReset.
7104 **/
7105int
7106mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7107 int ret = -1;
7108
7109 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7110 if (ret == 0)
7111 return ret;
7112 ret = mpt_HardResetHandler(ioc, sleepFlag);
7113 return ret;
7114}
7115EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7116
7117/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7118/*
7119 * Reset Handling
7120 */
7121/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7122/**
7123 * mpt_HardResetHandler - Generic reset handler
7124 * @ioc: Pointer to MPT_ADAPTER structure
7125 * @sleepFlag: Indicates if sleep or schedule must be called.
7126 *
7127 * Issues SCSI Task Management call based on input arg values.
7128 * If TaskMgmt fails, returns associated SCSI request.
7129 *
7130 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7131 * or a non-interrupt thread. In the former, must not call schedule().
7132 *
7133 * Note: A return of -1 is a FATAL error case, as it means a
7134 * FW reload/initialization failed.
7135 *
7136 * Returns 0 for SUCCESS or -1 if FAILED.
7137 */
7138int
7139mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7140{
7141 int rc;
7142 u8 cb_idx;
7143 unsigned long flags;
7144 unsigned long time_count;
7145
7146 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7147#ifdef MFCNT
7148 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7149 printk("MF count 0x%x !\n", ioc->mfcnt);
7150#endif
7151 if (mpt_fwfault_debug)
7152 mpt_halt_firmware(ioc);
7153
7154 /* Reset the adapter. Prevent more than 1 call to
7155 * mpt_do_ioc_recovery at any instant in time.
7156 */
7157 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7158 if (ioc->ioc_reset_in_progress) {
7159 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7160 ioc->wait_on_reset_completion = 1;
7161 do {
7162 ssleep(1);
7163 } while (ioc->ioc_reset_in_progress == 1);
7164 ioc->wait_on_reset_completion = 0;
7165 return ioc->reset_status;
7166 }
7167 if (ioc->wait_on_reset_completion) {
7168 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7169 rc = 0;
7170 time_count = jiffies;
7171 goto exit;
7172 }
7173 ioc->ioc_reset_in_progress = 1;
7174 if (ioc->alt_ioc)
7175 ioc->alt_ioc->ioc_reset_in_progress = 1;
7176 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7177
7178
7179 /* The SCSI driver needs to adjust timeouts on all current
7180 * commands prior to the diagnostic reset being issued.
7181 * Prevents timeouts occurring during a diagnostic reset...very bad.
7182 * For all other protocol drivers, this is a no-op.
7183 */
7184 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7185 if (MptResetHandlers[cb_idx]) {
7186 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7187 if (ioc->alt_ioc)
7188 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7189 MPT_IOC_SETUP_RESET);
7190 }
7191 }
7192
7193 time_count = jiffies;
7194 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7195 if (rc != 0) {
7196 printk(KERN_WARNING MYNAM
7197 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7198 rc, ioc->name, mpt_GetIocState(ioc, 0));
7199 } else {
7200 if (ioc->hard_resets < -1)
7201 ioc->hard_resets++;
7202 }
7203
7204 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7205 ioc->ioc_reset_in_progress = 0;
7206 ioc->taskmgmt_quiesce_io = 0;
7207 ioc->taskmgmt_in_progress = 0;
7208 ioc->reset_status = rc;
7209 if (ioc->alt_ioc) {
7210 ioc->alt_ioc->ioc_reset_in_progress = 0;
7211 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7212 ioc->alt_ioc->taskmgmt_in_progress = 0;
7213 }
7214 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7215
7216 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7217 if (MptResetHandlers[cb_idx]) {
7218 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7219 if (ioc->alt_ioc)
7220 mpt_signal_reset(cb_idx,
7221 ioc->alt_ioc, MPT_IOC_POST_RESET);
7222 }
7223 }
7224exit:
7225 dtmprintk(ioc,
7226 printk(MYIOC_s_DEBUG_FMT
7227 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7228 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7229 "SUCCESS" : "FAILED")));
7230
7231 return rc;
7232}
7233
7234#ifdef CONFIG_FUSION_LOGGING
7235static void
7236mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7237{
7238 char *ds = NULL;
7239 u32 evData0;
7240 int ii;
7241 u8 event;
7242 char *evStr = ioc->evStr;
7243
7244 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7245 evData0 = le32_to_cpu(pEventReply->Data[0]);
7246
7247 switch(event) {
7248 case MPI_EVENT_NONE:
7249 ds = "None";
7250 break;
7251 case MPI_EVENT_LOG_DATA:
7252 ds = "Log Data";
7253 break;
7254 case MPI_EVENT_STATE_CHANGE:
7255 ds = "State Change";
7256 break;
7257 case MPI_EVENT_UNIT_ATTENTION:
7258 ds = "Unit Attention";
7259 break;
7260 case MPI_EVENT_IOC_BUS_RESET:
7261 ds = "IOC Bus Reset";
7262 break;
7263 case MPI_EVENT_EXT_BUS_RESET:
7264 ds = "External Bus Reset";
7265 break;
7266 case MPI_EVENT_RESCAN:
7267 ds = "Bus Rescan Event";
7268 break;
7269 case MPI_EVENT_LINK_STATUS_CHANGE:
7270 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7271 ds = "Link Status(FAILURE) Change";
7272 else
7273 ds = "Link Status(ACTIVE) Change";
7274 break;
7275 case MPI_EVENT_LOOP_STATE_CHANGE:
7276 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7277 ds = "Loop State(LIP) Change";
7278 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7279 ds = "Loop State(LPE) Change";
7280 else
7281 ds = "Loop State(LPB) Change";
7282 break;
7283 case MPI_EVENT_LOGOUT:
7284 ds = "Logout";
7285 break;
7286 case MPI_EVENT_EVENT_CHANGE:
7287 if (evData0)
7288 ds = "Events ON";
7289 else
7290 ds = "Events OFF";
7291 break;
7292 case MPI_EVENT_INTEGRATED_RAID:
7293 {
7294 u8 ReasonCode = (u8)(evData0 >> 16);
7295 switch (ReasonCode) {
7296 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7297 ds = "Integrated Raid: Volume Created";
7298 break;
7299 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7300 ds = "Integrated Raid: Volume Deleted";
7301 break;
7302 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7303 ds = "Integrated Raid: Volume Settings Changed";
7304 break;
7305 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7306 ds = "Integrated Raid: Volume Status Changed";
7307 break;
7308 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7309 ds = "Integrated Raid: Volume Physdisk Changed";
7310 break;
7311 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7312 ds = "Integrated Raid: Physdisk Created";
7313 break;
7314 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7315 ds = "Integrated Raid: Physdisk Deleted";
7316 break;
7317 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7318 ds = "Integrated Raid: Physdisk Settings Changed";
7319 break;
7320 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7321 ds = "Integrated Raid: Physdisk Status Changed";
7322 break;
7323 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7324 ds = "Integrated Raid: Domain Validation Needed";
7325 break;
7326 case MPI_EVENT_RAID_RC_SMART_DATA :
7327 ds = "Integrated Raid; Smart Data";
7328 break;
7329 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7330 ds = "Integrated Raid: Replace Action Started";
7331 break;
7332 default:
7333 ds = "Integrated Raid";
7334 break;
7335 }
7336 break;
7337 }
7338 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7339 ds = "SCSI Device Status Change";
7340 break;
7341 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7342 {
7343 u8 id = (u8)(evData0);
7344 u8 channel = (u8)(evData0 >> 8);
7345 u8 ReasonCode = (u8)(evData0 >> 16);
7346 switch (ReasonCode) {
7347 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7348 snprintf(evStr, EVENT_DESCR_STR_SZ,
7349 "SAS Device Status Change: Added: "
7350 "id=%d channel=%d", id, channel);
7351 break;
7352 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7353 snprintf(evStr, EVENT_DESCR_STR_SZ,
7354 "SAS Device Status Change: Deleted: "
7355 "id=%d channel=%d", id, channel);
7356 break;
7357 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7358 snprintf(evStr, EVENT_DESCR_STR_SZ,
7359 "SAS Device Status Change: SMART Data: "
7360 "id=%d channel=%d", id, channel);
7361 break;
7362 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7363 snprintf(evStr, EVENT_DESCR_STR_SZ,
7364 "SAS Device Status Change: No Persistency: "
7365 "id=%d channel=%d", id, channel);
7366 break;
7367 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7368 snprintf(evStr, EVENT_DESCR_STR_SZ,
7369 "SAS Device Status Change: Unsupported Device "
7370 "Discovered : id=%d channel=%d", id, channel);
7371 break;
7372 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7373 snprintf(evStr, EVENT_DESCR_STR_SZ,
7374 "SAS Device Status Change: Internal Device "
7375 "Reset : id=%d channel=%d", id, channel);
7376 break;
7377 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7378 snprintf(evStr, EVENT_DESCR_STR_SZ,
7379 "SAS Device Status Change: Internal Task "
7380 "Abort : id=%d channel=%d", id, channel);
7381 break;
7382 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7383 snprintf(evStr, EVENT_DESCR_STR_SZ,
7384 "SAS Device Status Change: Internal Abort "
7385 "Task Set : id=%d channel=%d", id, channel);
7386 break;
7387 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7388 snprintf(evStr, EVENT_DESCR_STR_SZ,
7389 "SAS Device Status Change: Internal Clear "
7390 "Task Set : id=%d channel=%d", id, channel);
7391 break;
7392 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7393 snprintf(evStr, EVENT_DESCR_STR_SZ,
7394 "SAS Device Status Change: Internal Query "
7395 "Task : id=%d channel=%d", id, channel);
7396 break;
7397 default:
7398 snprintf(evStr, EVENT_DESCR_STR_SZ,
7399 "SAS Device Status Change: Unknown: "
7400 "id=%d channel=%d", id, channel);
7401 break;
7402 }
7403 break;
7404 }
7405 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7406 ds = "Bus Timer Expired";
7407 break;
7408 case MPI_EVENT_QUEUE_FULL:
7409 {
7410 u16 curr_depth = (u16)(evData0 >> 16);
7411 u8 channel = (u8)(evData0 >> 8);
7412 u8 id = (u8)(evData0);
7413
7414 snprintf(evStr, EVENT_DESCR_STR_SZ,
7415 "Queue Full: channel=%d id=%d depth=%d",
7416 channel, id, curr_depth);
7417 break;
7418 }
7419 case MPI_EVENT_SAS_SES:
7420 ds = "SAS SES Event";
7421 break;
7422 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7423 ds = "Persistent Table Full";
7424 break;
7425 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7426 {
7427 u8 LinkRates = (u8)(evData0 >> 8);
7428 u8 PhyNumber = (u8)(evData0);
7429 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7430 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7431 switch (LinkRates) {
7432 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7433 snprintf(evStr, EVENT_DESCR_STR_SZ,
7434 "SAS PHY Link Status: Phy=%d:"
7435 " Rate Unknown",PhyNumber);
7436 break;
7437 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7438 snprintf(evStr, EVENT_DESCR_STR_SZ,
7439 "SAS PHY Link Status: Phy=%d:"
7440 " Phy Disabled",PhyNumber);
7441 break;
7442 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7443 snprintf(evStr, EVENT_DESCR_STR_SZ,
7444 "SAS PHY Link Status: Phy=%d:"
7445 " Failed Speed Nego",PhyNumber);
7446 break;
7447 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7448 snprintf(evStr, EVENT_DESCR_STR_SZ,
7449 "SAS PHY Link Status: Phy=%d:"
7450 " Sata OOB Completed",PhyNumber);
7451 break;
7452 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7453 snprintf(evStr, EVENT_DESCR_STR_SZ,
7454 "SAS PHY Link Status: Phy=%d:"
7455 " Rate 1.5 Gbps",PhyNumber);
7456 break;
7457 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7458 snprintf(evStr, EVENT_DESCR_STR_SZ,
7459 "SAS PHY Link Status: Phy=%d:"
7460 " Rate 3.0 Gbps", PhyNumber);
7461 break;
7462 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7463 snprintf(evStr, EVENT_DESCR_STR_SZ,
7464 "SAS PHY Link Status: Phy=%d:"
7465 " Rate 6.0 Gbps", PhyNumber);
7466 break;
7467 default:
7468 snprintf(evStr, EVENT_DESCR_STR_SZ,
7469 "SAS PHY Link Status: Phy=%d", PhyNumber);
7470 break;
7471 }
7472 break;
7473 }
7474 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7475 ds = "SAS Discovery Error";
7476 break;
7477 case MPI_EVENT_IR_RESYNC_UPDATE:
7478 {
7479 u8 resync_complete = (u8)(evData0 >> 16);
7480 snprintf(evStr, EVENT_DESCR_STR_SZ,
7481 "IR Resync Update: Complete = %d:",resync_complete);
7482 break;
7483 }
7484 case MPI_EVENT_IR2:
7485 {
7486 u8 id = (u8)(evData0);
7487 u8 channel = (u8)(evData0 >> 8);
7488 u8 phys_num = (u8)(evData0 >> 24);
7489 u8 ReasonCode = (u8)(evData0 >> 16);
7490
7491 switch (ReasonCode) {
7492 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7493 snprintf(evStr, EVENT_DESCR_STR_SZ,
7494 "IR2: LD State Changed: "
7495 "id=%d channel=%d phys_num=%d",
7496 id, channel, phys_num);
7497 break;
7498 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7499 snprintf(evStr, EVENT_DESCR_STR_SZ,
7500 "IR2: PD State Changed "
7501 "id=%d channel=%d phys_num=%d",
7502 id, channel, phys_num);
7503 break;
7504 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7505 snprintf(evStr, EVENT_DESCR_STR_SZ,
7506 "IR2: Bad Block Table Full: "
7507 "id=%d channel=%d phys_num=%d",
7508 id, channel, phys_num);
7509 break;
7510 case MPI_EVENT_IR2_RC_PD_INSERTED:
7511 snprintf(evStr, EVENT_DESCR_STR_SZ,
7512 "IR2: PD Inserted: "
7513 "id=%d channel=%d phys_num=%d",
7514 id, channel, phys_num);
7515 break;
7516 case MPI_EVENT_IR2_RC_PD_REMOVED:
7517 snprintf(evStr, EVENT_DESCR_STR_SZ,
7518 "IR2: PD Removed: "
7519 "id=%d channel=%d phys_num=%d",
7520 id, channel, phys_num);
7521 break;
7522 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7523 snprintf(evStr, EVENT_DESCR_STR_SZ,
7524 "IR2: Foreign CFG Detected: "
7525 "id=%d channel=%d phys_num=%d",
7526 id, channel, phys_num);
7527 break;
7528 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7529 snprintf(evStr, EVENT_DESCR_STR_SZ,
7530 "IR2: Rebuild Medium Error: "
7531 "id=%d channel=%d phys_num=%d",
7532 id, channel, phys_num);
7533 break;
7534 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7535 snprintf(evStr, EVENT_DESCR_STR_SZ,
7536 "IR2: Dual Port Added: "
7537 "id=%d channel=%d phys_num=%d",
7538 id, channel, phys_num);
7539 break;
7540 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7541 snprintf(evStr, EVENT_DESCR_STR_SZ,
7542 "IR2: Dual Port Removed: "
7543 "id=%d channel=%d phys_num=%d",
7544 id, channel, phys_num);
7545 break;
7546 default:
7547 ds = "IR2";
7548 break;
7549 }
7550 break;
7551 }
7552 case MPI_EVENT_SAS_DISCOVERY:
7553 {
7554 if (evData0)
7555 ds = "SAS Discovery: Start";
7556 else
7557 ds = "SAS Discovery: Stop";
7558 break;
7559 }
7560 case MPI_EVENT_LOG_ENTRY_ADDED:
7561 ds = "SAS Log Entry Added";
7562 break;
7563
7564 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7565 {
7566 u8 phy_num = (u8)(evData0);
7567 u8 port_num = (u8)(evData0 >> 8);
7568 u8 port_width = (u8)(evData0 >> 16);
7569 u8 primitive = (u8)(evData0 >> 24);
7570 snprintf(evStr, EVENT_DESCR_STR_SZ,
7571 "SAS Broadcast Primitive: phy=%d port=%d "
7572 "width=%d primitive=0x%02x",
7573 phy_num, port_num, port_width, primitive);
7574 break;
7575 }
7576
7577 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7578 {
7579 u8 reason = (u8)(evData0);
7580
7581 switch (reason) {
7582 case MPI_EVENT_SAS_INIT_RC_ADDED:
7583 ds = "SAS Initiator Status Change: Added";
7584 break;
7585 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7586 ds = "SAS Initiator Status Change: Deleted";
7587 break;
7588 default:
7589 ds = "SAS Initiator Status Change";
7590 break;
7591 }
7592 break;
7593 }
7594
7595 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7596 {
7597 u8 max_init = (u8)(evData0);
7598 u8 current_init = (u8)(evData0 >> 8);
7599
7600 snprintf(evStr, EVENT_DESCR_STR_SZ,
7601 "SAS Initiator Device Table Overflow: max initiators=%02d "
7602 "current initiators=%02d",
7603 max_init, current_init);
7604 break;
7605 }
7606 case MPI_EVENT_SAS_SMP_ERROR:
7607 {
7608 u8 status = (u8)(evData0);
7609 u8 port_num = (u8)(evData0 >> 8);
7610 u8 result = (u8)(evData0 >> 16);
7611
7612 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7613 snprintf(evStr, EVENT_DESCR_STR_SZ,
7614 "SAS SMP Error: port=%d result=0x%02x",
7615 port_num, result);
7616 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7617 snprintf(evStr, EVENT_DESCR_STR_SZ,
7618 "SAS SMP Error: port=%d : CRC Error",
7619 port_num);
7620 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7621 snprintf(evStr, EVENT_DESCR_STR_SZ,
7622 "SAS SMP Error: port=%d : Timeout",
7623 port_num);
7624 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7625 snprintf(evStr, EVENT_DESCR_STR_SZ,
7626 "SAS SMP Error: port=%d : No Destination",
7627 port_num);
7628 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7629 snprintf(evStr, EVENT_DESCR_STR_SZ,
7630 "SAS SMP Error: port=%d : Bad Destination",
7631 port_num);
7632 else
7633 snprintf(evStr, EVENT_DESCR_STR_SZ,
7634 "SAS SMP Error: port=%d : status=0x%02x",
7635 port_num, status);
7636 break;
7637 }
7638
7639 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7640 {
7641 u8 reason = (u8)(evData0);
7642
7643 switch (reason) {
7644 case MPI_EVENT_SAS_EXP_RC_ADDED:
7645 ds = "Expander Status Change: Added";
7646 break;
7647 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7648 ds = "Expander Status Change: Deleted";
7649 break;
7650 default:
7651 ds = "Expander Status Change";
7652 break;
7653 }
7654 break;
7655 }
7656
7657 /*
7658 * MPT base "custom" events may be added here...
7659 */
7660 default:
7661 ds = "Unknown";
7662 break;
7663 }
7664 if (ds)
7665 strscpy(evStr, ds, EVENT_DESCR_STR_SZ);
7666
7667
7668 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7669 "MPT event:(%02Xh) : %s\n",
7670 ioc->name, event, evStr));
7671
7672 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7673 ": Event data:\n"));
7674 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7675 devtverboseprintk(ioc, printk(" %08x",
7676 le32_to_cpu(pEventReply->Data[ii])));
7677 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7678}
7679#endif
7680/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7681/**
7682 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7683 * @ioc: Pointer to MPT_ADAPTER structure
7684 * @pEventReply: Pointer to EventNotification reply frame
7685 * @evHandlers: Pointer to integer, number of event handlers
7686 *
7687 * Routes a received EventNotificationReply to all currently registered
7688 * event handlers.
7689 * Returns sum of event handlers return values.
7690 */
7691static int
7692ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7693{
7694 u16 evDataLen;
7695 u32 evData0 = 0;
7696 int ii;
7697 u8 cb_idx;
7698 int r = 0;
7699 int handlers = 0;
7700 u8 event;
7701
7702 /*
7703 * Do platform normalization of values
7704 */
7705 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7706 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7707 if (evDataLen) {
7708 evData0 = le32_to_cpu(pEventReply->Data[0]);
7709 }
7710
7711#ifdef CONFIG_FUSION_LOGGING
7712 if (evDataLen)
7713 mpt_display_event_info(ioc, pEventReply);
7714#endif
7715
7716 /*
7717 * Do general / base driver event processing
7718 */
7719 switch(event) {
7720 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7721 if (evDataLen) {
7722 u8 evState = evData0 & 0xFF;
7723
7724 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7725
7726 /* Update EventState field in cached IocFacts */
7727 if (ioc->facts.Function) {
7728 ioc->facts.EventState = evState;
7729 }
7730 }
7731 break;
7732 case MPI_EVENT_INTEGRATED_RAID:
7733 mptbase_raid_process_event_data(ioc,
7734 (MpiEventDataRaid_t *)pEventReply->Data);
7735 break;
7736 default:
7737 break;
7738 }
7739
7740 /*
7741 * Should this event be logged? Events are written sequentially.
7742 * When buffer is full, start again at the top.
7743 */
7744 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7745 int idx;
7746
7747 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7748
7749 ioc->events[idx].event = event;
7750 ioc->events[idx].eventContext = ioc->eventContext;
7751
7752 for (ii = 0; ii < 2; ii++) {
7753 if (ii < evDataLen)
7754 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7755 else
7756 ioc->events[idx].data[ii] = 0;
7757 }
7758
7759 ioc->eventContext++;
7760 }
7761
7762
7763 /*
7764 * Call each currently registered protocol event handler.
7765 */
7766 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7767 if (MptEvHandlers[cb_idx]) {
7768 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7769 "Routing Event to event handler #%d\n",
7770 ioc->name, cb_idx));
7771 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7772 handlers++;
7773 }
7774 }
7775 /* FIXME? Examine results here? */
7776
7777 /*
7778 * If needed, send (a single) EventAck.
7779 */
7780 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7781 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7782 "EventAck required\n",ioc->name));
7783 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7784 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7785 ioc->name, ii));
7786 }
7787 }
7788
7789 *evHandlers = handlers;
7790 return r;
7791}
7792
7793/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7794/**
7795 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7796 * @ioc: Pointer to MPT_ADAPTER structure
7797 * @log_info: U32 LogInfo reply word from the IOC
7798 *
7799 * Refer to lsi/mpi_log_fc.h.
7800 */
7801static void
7802mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7803{
7804 char *desc = "unknown";
7805
7806 switch (log_info & 0xFF000000) {
7807 case MPI_IOCLOGINFO_FC_INIT_BASE:
7808 desc = "FCP Initiator";
7809 break;
7810 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7811 desc = "FCP Target";
7812 break;
7813 case MPI_IOCLOGINFO_FC_LAN_BASE:
7814 desc = "LAN";
7815 break;
7816 case MPI_IOCLOGINFO_FC_MSG_BASE:
7817 desc = "MPI Message Layer";
7818 break;
7819 case MPI_IOCLOGINFO_FC_LINK_BASE:
7820 desc = "FC Link";
7821 break;
7822 case MPI_IOCLOGINFO_FC_CTX_BASE:
7823 desc = "Context Manager";
7824 break;
7825 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7826 desc = "Invalid Field Offset";
7827 break;
7828 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7829 desc = "State Change Info";
7830 break;
7831 }
7832
7833 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7834 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7835}
7836
7837/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7838/**
7839 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7840 * @ioc: Pointer to MPT_ADAPTER structure
7841 * @log_info: U32 LogInfo word from the IOC
7842 *
7843 * Refer to lsi/sp_log.h.
7844 */
7845static void
7846mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7847{
7848 u32 info = log_info & 0x00FF0000;
7849 char *desc = "unknown";
7850
7851 switch (info) {
7852 case 0x00010000:
7853 desc = "bug! MID not found";
7854 break;
7855
7856 case 0x00020000:
7857 desc = "Parity Error";
7858 break;
7859
7860 case 0x00030000:
7861 desc = "ASYNC Outbound Overrun";
7862 break;
7863
7864 case 0x00040000:
7865 desc = "SYNC Offset Error";
7866 break;
7867
7868 case 0x00050000:
7869 desc = "BM Change";
7870 break;
7871
7872 case 0x00060000:
7873 desc = "Msg In Overflow";
7874 break;
7875
7876 case 0x00070000:
7877 desc = "DMA Error";
7878 break;
7879
7880 case 0x00080000:
7881 desc = "Outbound DMA Overrun";
7882 break;
7883
7884 case 0x00090000:
7885 desc = "Task Management";
7886 break;
7887
7888 case 0x000A0000:
7889 desc = "Device Problem";
7890 break;
7891
7892 case 0x000B0000:
7893 desc = "Invalid Phase Change";
7894 break;
7895
7896 case 0x000C0000:
7897 desc = "Untagged Table Size";
7898 break;
7899
7900 }
7901
7902 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7903}
7904
7905/* strings for sas loginfo */
7906 static char *originator_str[] = {
7907 "IOP", /* 00h */
7908 "PL", /* 01h */
7909 "IR" /* 02h */
7910 };
7911 static char *iop_code_str[] = {
7912 NULL, /* 00h */
7913 "Invalid SAS Address", /* 01h */
7914 NULL, /* 02h */
7915 "Invalid Page", /* 03h */
7916 "Diag Message Error", /* 04h */
7917 "Task Terminated", /* 05h */
7918 "Enclosure Management", /* 06h */
7919 "Target Mode" /* 07h */
7920 };
7921 static char *pl_code_str[] = {
7922 NULL, /* 00h */
7923 "Open Failure", /* 01h */
7924 "Invalid Scatter Gather List", /* 02h */
7925 "Wrong Relative Offset or Frame Length", /* 03h */
7926 "Frame Transfer Error", /* 04h */
7927 "Transmit Frame Connected Low", /* 05h */
7928 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7929 "SATA Read Log Receive Data Error", /* 07h */
7930 "SATA NCQ Fail All Commands After Error", /* 08h */
7931 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7932 "Receive Frame Invalid Message", /* 0Ah */
7933 "Receive Context Message Valid Error", /* 0Bh */
7934 "Receive Frame Current Frame Error", /* 0Ch */
7935 "SATA Link Down", /* 0Dh */
7936 "Discovery SATA Init W IOS", /* 0Eh */
7937 "Config Invalid Page", /* 0Fh */
7938 "Discovery SATA Init Timeout", /* 10h */
7939 "Reset", /* 11h */
7940 "Abort", /* 12h */
7941 "IO Not Yet Executed", /* 13h */
7942 "IO Executed", /* 14h */
7943 "Persistent Reservation Out Not Affiliation "
7944 "Owner", /* 15h */
7945 "Open Transmit DMA Abort", /* 16h */
7946 "IO Device Missing Delay Retry", /* 17h */
7947 "IO Cancelled Due to Receive Error", /* 18h */
7948 NULL, /* 19h */
7949 NULL, /* 1Ah */
7950 NULL, /* 1Bh */
7951 NULL, /* 1Ch */
7952 NULL, /* 1Dh */
7953 NULL, /* 1Eh */
7954 NULL, /* 1Fh */
7955 "Enclosure Management" /* 20h */
7956 };
7957 static char *ir_code_str[] = {
7958 "Raid Action Error", /* 00h */
7959 NULL, /* 00h */
7960 NULL, /* 01h */
7961 NULL, /* 02h */
7962 NULL, /* 03h */
7963 NULL, /* 04h */
7964 NULL, /* 05h */
7965 NULL, /* 06h */
7966 NULL /* 07h */
7967 };
7968 static char *raid_sub_code_str[] = {
7969 NULL, /* 00h */
7970 "Volume Creation Failed: Data Passed too "
7971 "Large", /* 01h */
7972 "Volume Creation Failed: Duplicate Volumes "
7973 "Attempted", /* 02h */
7974 "Volume Creation Failed: Max Number "
7975 "Supported Volumes Exceeded", /* 03h */
7976 "Volume Creation Failed: DMA Error", /* 04h */
7977 "Volume Creation Failed: Invalid Volume Type", /* 05h */
7978 "Volume Creation Failed: Error Reading "
7979 "MFG Page 4", /* 06h */
7980 "Volume Creation Failed: Creating Internal "
7981 "Structures", /* 07h */
7982 NULL, /* 08h */
7983 NULL, /* 09h */
7984 NULL, /* 0Ah */
7985 NULL, /* 0Bh */
7986 NULL, /* 0Ch */
7987 NULL, /* 0Dh */
7988 NULL, /* 0Eh */
7989 NULL, /* 0Fh */
7990 "Activation failed: Already Active Volume", /* 10h */
7991 "Activation failed: Unsupported Volume Type", /* 11h */
7992 "Activation failed: Too Many Active Volumes", /* 12h */
7993 "Activation failed: Volume ID in Use", /* 13h */
7994 "Activation failed: Reported Failure", /* 14h */
7995 "Activation failed: Importing a Volume", /* 15h */
7996 NULL, /* 16h */
7997 NULL, /* 17h */
7998 NULL, /* 18h */
7999 NULL, /* 19h */
8000 NULL, /* 1Ah */
8001 NULL, /* 1Bh */
8002 NULL, /* 1Ch */
8003 NULL, /* 1Dh */
8004 NULL, /* 1Eh */
8005 NULL, /* 1Fh */
8006 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8007 "Phys Disk failed: Data Passed too Large", /* 21h */
8008 "Phys Disk failed: DMA Error", /* 22h */
8009 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8010 "Phys Disk failed: Creating Phys Disk Config "
8011 "Page", /* 24h */
8012 NULL, /* 25h */
8013 NULL, /* 26h */
8014 NULL, /* 27h */
8015 NULL, /* 28h */
8016 NULL, /* 29h */
8017 NULL, /* 2Ah */
8018 NULL, /* 2Bh */
8019 NULL, /* 2Ch */
8020 NULL, /* 2Dh */
8021 NULL, /* 2Eh */
8022 NULL, /* 2Fh */
8023 "Compatibility Error: IR Disabled", /* 30h */
8024 "Compatibility Error: Inquiry Command Failed", /* 31h */
8025 "Compatibility Error: Device not Direct Access "
8026 "Device ", /* 32h */
8027 "Compatibility Error: Removable Device Found", /* 33h */
8028 "Compatibility Error: Device SCSI Version not "
8029 "2 or Higher", /* 34h */
8030 "Compatibility Error: SATA Device, 48 BIT LBA "
8031 "not Supported", /* 35h */
8032 "Compatibility Error: Device doesn't have "
8033 "512 Byte Block Sizes", /* 36h */
8034 "Compatibility Error: Volume Type Check Failed", /* 37h */
8035 "Compatibility Error: Volume Type is "
8036 "Unsupported by FW", /* 38h */
8037 "Compatibility Error: Disk Drive too Small for "
8038 "use in Volume", /* 39h */
8039 "Compatibility Error: Phys Disk for Create "
8040 "Volume not Found", /* 3Ah */
8041 "Compatibility Error: Too Many or too Few "
8042 "Disks for Volume Type", /* 3Bh */
8043 "Compatibility Error: Disk stripe Sizes "
8044 "Must be 64KB", /* 3Ch */
8045 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8046 };
8047
8048/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8049/**
8050 * mpt_sas_log_info - Log information returned from SAS IOC.
8051 * @ioc: Pointer to MPT_ADAPTER structure
8052 * @log_info: U32 LogInfo reply word from the IOC
8053 * @cb_idx: callback function's handle
8054 *
8055 * Refer to lsi/mpi_log_sas.h.
8056 **/
8057static void
8058mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8059{
8060 union loginfo_type {
8061 u32 loginfo;
8062 struct {
8063 u32 subcode:16;
8064 u32 code:8;
8065 u32 originator:4;
8066 u32 bus_type:4;
8067 } dw;
8068 };
8069 union loginfo_type sas_loginfo;
8070 char *originator_desc = NULL;
8071 char *code_desc = NULL;
8072 char *sub_code_desc = NULL;
8073
8074 sas_loginfo.loginfo = log_info;
8075 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8076 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8077 return;
8078
8079 originator_desc = originator_str[sas_loginfo.dw.originator];
8080
8081 switch (sas_loginfo.dw.originator) {
8082
8083 case 0: /* IOP */
8084 if (sas_loginfo.dw.code <
8085 ARRAY_SIZE(iop_code_str))
8086 code_desc = iop_code_str[sas_loginfo.dw.code];
8087 break;
8088 case 1: /* PL */
8089 if (sas_loginfo.dw.code <
8090 ARRAY_SIZE(pl_code_str))
8091 code_desc = pl_code_str[sas_loginfo.dw.code];
8092 break;
8093 case 2: /* IR */
8094 if (sas_loginfo.dw.code >=
8095 ARRAY_SIZE(ir_code_str))
8096 break;
8097 code_desc = ir_code_str[sas_loginfo.dw.code];
8098 if (sas_loginfo.dw.subcode >=
8099 ARRAY_SIZE(raid_sub_code_str))
8100 break;
8101 if (sas_loginfo.dw.code == 0)
8102 sub_code_desc =
8103 raid_sub_code_str[sas_loginfo.dw.subcode];
8104 break;
8105 default:
8106 return;
8107 }
8108
8109 if (sub_code_desc != NULL)
8110 printk(MYIOC_s_INFO_FMT
8111 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8112 " SubCode={%s} cb_idx %s\n",
8113 ioc->name, log_info, originator_desc, code_desc,
8114 sub_code_desc, MptCallbacksName[cb_idx]);
8115 else if (code_desc != NULL)
8116 printk(MYIOC_s_INFO_FMT
8117 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8118 " SubCode(0x%04x) cb_idx %s\n",
8119 ioc->name, log_info, originator_desc, code_desc,
8120 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8121 else
8122 printk(MYIOC_s_INFO_FMT
8123 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8124 " SubCode(0x%04x) cb_idx %s\n",
8125 ioc->name, log_info, originator_desc,
8126 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8127 MptCallbacksName[cb_idx]);
8128}
8129
8130/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8131/**
8132 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8133 * @ioc: Pointer to MPT_ADAPTER structure
8134 * @ioc_status: U32 IOCStatus word from IOC
8135 * @mf: Pointer to MPT request frame
8136 *
8137 * Refer to lsi/mpi.h.
8138 **/
8139static void
8140mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8141{
8142 Config_t *pReq = (Config_t *)mf;
8143 char extend_desc[EVENT_DESCR_STR_SZ];
8144 char *desc = NULL;
8145 u32 form;
8146 u8 page_type;
8147
8148 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8149 page_type = pReq->ExtPageType;
8150 else
8151 page_type = pReq->Header.PageType;
8152
8153 /*
8154 * ignore invalid page messages for GET_NEXT_HANDLE
8155 */
8156 form = le32_to_cpu(pReq->PageAddress);
8157 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8158 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8159 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8160 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8161 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8162 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8163 return;
8164 }
8165 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8166 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8167 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8168 return;
8169 }
8170
8171 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8172 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8173 page_type, pReq->Header.PageNumber, pReq->Action, form);
8174
8175 switch (ioc_status) {
8176
8177 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8178 desc = "Config Page Invalid Action";
8179 break;
8180
8181 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8182 desc = "Config Page Invalid Type";
8183 break;
8184
8185 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8186 desc = "Config Page Invalid Page";
8187 break;
8188
8189 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8190 desc = "Config Page Invalid Data";
8191 break;
8192
8193 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8194 desc = "Config Page No Defaults";
8195 break;
8196
8197 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8198 desc = "Config Page Can't Commit";
8199 break;
8200 }
8201
8202 if (!desc)
8203 return;
8204
8205 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8206 ioc->name, ioc_status, desc, extend_desc));
8207}
8208
8209/**
8210 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8211 * @ioc: Pointer to MPT_ADAPTER structure
8212 * @ioc_status: U32 IOCStatus word from IOC
8213 * @mf: Pointer to MPT request frame
8214 *
8215 * Refer to lsi/mpi.h.
8216 **/
8217static void
8218mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8219{
8220 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8221 char *desc = NULL;
8222
8223 switch (status) {
8224
8225/****************************************************************************/
8226/* Common IOCStatus values for all replies */
8227/****************************************************************************/
8228
8229 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8230 desc = "Invalid Function";
8231 break;
8232
8233 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8234 desc = "Busy";
8235 break;
8236
8237 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8238 desc = "Invalid SGL";
8239 break;
8240
8241 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8242 desc = "Internal Error";
8243 break;
8244
8245 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8246 desc = "Reserved";
8247 break;
8248
8249 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8250 desc = "Insufficient Resources";
8251 break;
8252
8253 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8254 desc = "Invalid Field";
8255 break;
8256
8257 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8258 desc = "Invalid State";
8259 break;
8260
8261/****************************************************************************/
8262/* Config IOCStatus values */
8263/****************************************************************************/
8264
8265 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8266 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8267 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8268 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8269 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8270 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8271 mpt_iocstatus_info_config(ioc, status, mf);
8272 break;
8273
8274/****************************************************************************/
8275/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8276/* */
8277/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8278/* */
8279/****************************************************************************/
8280
8281 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8282 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8283 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8284 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8285 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8286 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8287 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8288 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8289 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8290 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8291 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8292 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8293 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8294 break;
8295
8296/****************************************************************************/
8297/* SCSI Target values */
8298/****************************************************************************/
8299
8300 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8301 desc = "Target: Priority IO";
8302 break;
8303
8304 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8305 desc = "Target: Invalid Port";
8306 break;
8307
8308 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8309 desc = "Target Invalid IO Index:";
8310 break;
8311
8312 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8313 desc = "Target: Aborted";
8314 break;
8315
8316 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8317 desc = "Target: No Conn Retryable";
8318 break;
8319
8320 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8321 desc = "Target: No Connection";
8322 break;
8323
8324 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8325 desc = "Target: Transfer Count Mismatch";
8326 break;
8327
8328 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8329 desc = "Target: STS Data not Sent";
8330 break;
8331
8332 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8333 desc = "Target: Data Offset Error";
8334 break;
8335
8336 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8337 desc = "Target: Too Much Write Data";
8338 break;
8339
8340 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8341 desc = "Target: IU Too Short";
8342 break;
8343
8344 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8345 desc = "Target: ACK NAK Timeout";
8346 break;
8347
8348 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8349 desc = "Target: Nak Received";
8350 break;
8351
8352/****************************************************************************/
8353/* Fibre Channel Direct Access values */
8354/****************************************************************************/
8355
8356 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8357 desc = "FC: Aborted";
8358 break;
8359
8360 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8361 desc = "FC: RX ID Invalid";
8362 break;
8363
8364 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8365 desc = "FC: DID Invalid";
8366 break;
8367
8368 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8369 desc = "FC: Node Logged Out";
8370 break;
8371
8372 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8373 desc = "FC: Exchange Canceled";
8374 break;
8375
8376/****************************************************************************/
8377/* LAN values */
8378/****************************************************************************/
8379
8380 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8381 desc = "LAN: Device not Found";
8382 break;
8383
8384 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8385 desc = "LAN: Device Failure";
8386 break;
8387
8388 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8389 desc = "LAN: Transmit Error";
8390 break;
8391
8392 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8393 desc = "LAN: Transmit Aborted";
8394 break;
8395
8396 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8397 desc = "LAN: Receive Error";
8398 break;
8399
8400 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8401 desc = "LAN: Receive Aborted";
8402 break;
8403
8404 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8405 desc = "LAN: Partial Packet";
8406 break;
8407
8408 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8409 desc = "LAN: Canceled";
8410 break;
8411
8412/****************************************************************************/
8413/* Serial Attached SCSI values */
8414/****************************************************************************/
8415
8416 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8417 desc = "SAS: SMP Request Failed";
8418 break;
8419
8420 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8421 desc = "SAS: SMP Data Overrun";
8422 break;
8423
8424 default:
8425 desc = "Others";
8426 break;
8427 }
8428
8429 if (!desc)
8430 return;
8431
8432 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8433 ioc->name, status, desc));
8434}
8435
8436/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8437EXPORT_SYMBOL(mpt_attach);
8438EXPORT_SYMBOL(mpt_detach);
8439#ifdef CONFIG_PM
8440EXPORT_SYMBOL(mpt_resume);
8441EXPORT_SYMBOL(mpt_suspend);
8442#endif
8443EXPORT_SYMBOL(ioc_list);
8444EXPORT_SYMBOL(mpt_register);
8445EXPORT_SYMBOL(mpt_deregister);
8446EXPORT_SYMBOL(mpt_event_register);
8447EXPORT_SYMBOL(mpt_event_deregister);
8448EXPORT_SYMBOL(mpt_reset_register);
8449EXPORT_SYMBOL(mpt_reset_deregister);
8450EXPORT_SYMBOL(mpt_device_driver_register);
8451EXPORT_SYMBOL(mpt_device_driver_deregister);
8452EXPORT_SYMBOL(mpt_get_msg_frame);
8453EXPORT_SYMBOL(mpt_put_msg_frame);
8454EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8455EXPORT_SYMBOL(mpt_free_msg_frame);
8456EXPORT_SYMBOL(mpt_send_handshake_request);
8457EXPORT_SYMBOL(mpt_verify_adapter);
8458EXPORT_SYMBOL(mpt_GetIocState);
8459EXPORT_SYMBOL(mpt_print_ioc_summary);
8460EXPORT_SYMBOL(mpt_HardResetHandler);
8461EXPORT_SYMBOL(mpt_config);
8462EXPORT_SYMBOL(mpt_findImVolumes);
8463EXPORT_SYMBOL(mpt_alloc_fw_memory);
8464EXPORT_SYMBOL(mpt_free_fw_memory);
8465EXPORT_SYMBOL(mptbase_sas_persist_operation);
8466EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8467
8468/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8469/**
8470 * fusion_init - Fusion MPT base driver initialization routine.
8471 *
8472 * Returns 0 for success, non-zero for failure.
8473 */
8474static int __init
8475fusion_init(void)
8476{
8477 u8 cb_idx;
8478
8479 show_mptmod_ver(my_NAME, my_VERSION);
8480 printk(KERN_INFO COPYRIGHT "\n");
8481
8482 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8483 MptCallbacks[cb_idx] = NULL;
8484 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8485 MptEvHandlers[cb_idx] = NULL;
8486 MptResetHandlers[cb_idx] = NULL;
8487 }
8488
8489 /* Register ourselves (mptbase) in order to facilitate
8490 * EventNotification handling.
8491 */
8492 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8493 "mptbase_reply");
8494
8495 /* Register for hard reset handling callbacks.
8496 */
8497 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8498
8499#ifdef CONFIG_PROC_FS
8500 (void) procmpt_create();
8501#endif
8502 return 0;
8503}
8504
8505/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8506/**
8507 * fusion_exit - Perform driver unload cleanup.
8508 *
8509 * This routine frees all resources associated with each MPT adapter
8510 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8511 */
8512static void __exit
8513fusion_exit(void)
8514{
8515
8516 mpt_reset_deregister(mpt_base_index);
8517
8518#ifdef CONFIG_PROC_FS
8519 procmpt_destroy();
8520#endif
8521}
8522
8523module_init(fusion_init);
8524module_exit(fusion_exit);
1/*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13/*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46*/
47/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49#include <linux/kernel.h>
50#include <linux/module.h>
51#include <linux/errno.h>
52#include <linux/init.h>
53#include <linux/seq_file.h>
54#include <linux/slab.h>
55#include <linux/types.h>
56#include <linux/pci.h>
57#include <linux/kdev_t.h>
58#include <linux/blkdev.h>
59#include <linux/delay.h>
60#include <linux/interrupt.h> /* needed for in_interrupt() proto */
61#include <linux/dma-mapping.h>
62#include <asm/io.h>
63#ifdef CONFIG_MTRR
64#include <asm/mtrr.h>
65#endif
66
67#include "mptbase.h"
68#include "lsi/mpi_log_fc.h"
69
70/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
71#define my_NAME "Fusion MPT base driver"
72#define my_VERSION MPT_LINUX_VERSION_COMMON
73#define MYNAM "mptbase"
74
75MODULE_AUTHOR(MODULEAUTHOR);
76MODULE_DESCRIPTION(my_NAME);
77MODULE_LICENSE("GPL");
78MODULE_VERSION(my_VERSION);
79
80/*
81 * cmd line parameters
82 */
83
84static int mpt_msi_enable_spi;
85module_param(mpt_msi_enable_spi, int, 0);
86MODULE_PARM_DESC(mpt_msi_enable_spi,
87 " Enable MSI Support for SPI controllers (default=0)");
88
89static int mpt_msi_enable_fc;
90module_param(mpt_msi_enable_fc, int, 0);
91MODULE_PARM_DESC(mpt_msi_enable_fc,
92 " Enable MSI Support for FC controllers (default=0)");
93
94static int mpt_msi_enable_sas;
95module_param(mpt_msi_enable_sas, int, 0);
96MODULE_PARM_DESC(mpt_msi_enable_sas,
97 " Enable MSI Support for SAS controllers (default=0)");
98
99static int mpt_channel_mapping;
100module_param(mpt_channel_mapping, int, 0);
101MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
102
103static int mpt_debug_level;
104static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
105module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
106 &mpt_debug_level, 0600);
107MODULE_PARM_DESC(mpt_debug_level,
108 " debug level - refer to mptdebug.h - (default=0)");
109
110int mpt_fwfault_debug;
111EXPORT_SYMBOL(mpt_fwfault_debug);
112module_param(mpt_fwfault_debug, int, 0600);
113MODULE_PARM_DESC(mpt_fwfault_debug,
114 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
115
116static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS][50];
117
118#ifdef MFCNT
119static int mfcounter = 0;
120#define PRINT_MF_COUNT 20000
121#endif
122
123/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
124/*
125 * Public data...
126 */
127
128#define WHOINIT_UNKNOWN 0xAA
129
130/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
131/*
132 * Private data...
133 */
134 /* Adapter link list */
135LIST_HEAD(ioc_list);
136 /* Callback lookup table */
137static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
138 /* Protocol driver class lookup table */
139static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
140 /* Event handler lookup table */
141static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
142 /* Reset handler lookup table */
143static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
144static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
145
146#ifdef CONFIG_PROC_FS
147static struct proc_dir_entry *mpt_proc_root_dir;
148#endif
149
150/*
151 * Driver Callback Index's
152 */
153static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
154static u8 last_drv_idx;
155
156/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
157/*
158 * Forward protos...
159 */
160static irqreturn_t mpt_interrupt(int irq, void *bus_id);
161static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
162 MPT_FRAME_HDR *reply);
163static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
164 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
165 int sleepFlag);
166static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
167static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
168static void mpt_adapter_disable(MPT_ADAPTER *ioc);
169static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
170
171static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
172static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
173static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
174static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
175static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
176static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
177static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
178static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
179static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
180static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
181static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
182static int PrimeIocFifos(MPT_ADAPTER *ioc);
183static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
184static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
185static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
186static int GetLanConfigPages(MPT_ADAPTER *ioc);
187static int GetIoUnitPage2(MPT_ADAPTER *ioc);
188int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
189static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
190static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
191static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
192static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
193static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
194static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
195 int sleepFlag);
196static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
197static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
198static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
199
200#ifdef CONFIG_PROC_FS
201static const struct file_operations mpt_summary_proc_fops;
202static const struct file_operations mpt_version_proc_fops;
203static const struct file_operations mpt_iocinfo_proc_fops;
204#endif
205static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
206
207static int ProcessEventNotification(MPT_ADAPTER *ioc,
208 EventNotificationReply_t *evReply, int *evHandlers);
209static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
210static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
211static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
212static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
213static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
214static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
215
216/* module entry point */
217static int __init fusion_init (void);
218static void __exit fusion_exit (void);
219
220#define CHIPREG_READ32(addr) readl_relaxed(addr)
221#define CHIPREG_READ32_dmasync(addr) readl(addr)
222#define CHIPREG_WRITE32(addr,val) writel(val, addr)
223#define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
224#define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
225
226static void
227pci_disable_io_access(struct pci_dev *pdev)
228{
229 u16 command_reg;
230
231 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
232 command_reg &= ~1;
233 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
234}
235
236static void
237pci_enable_io_access(struct pci_dev *pdev)
238{
239 u16 command_reg;
240
241 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
242 command_reg |= 1;
243 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
244}
245
246static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
247{
248 int ret = param_set_int(val, kp);
249 MPT_ADAPTER *ioc;
250
251 if (ret)
252 return ret;
253
254 list_for_each_entry(ioc, &ioc_list, list)
255 ioc->debug_level = mpt_debug_level;
256 return 0;
257}
258
259/**
260 * mpt_get_cb_idx - obtain cb_idx for registered driver
261 * @dclass: class driver enum
262 *
263 * Returns cb_idx, or zero means it wasn't found
264 **/
265static u8
266mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
267{
268 u8 cb_idx;
269
270 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
271 if (MptDriverClass[cb_idx] == dclass)
272 return cb_idx;
273 return 0;
274}
275
276/**
277 * mpt_is_discovery_complete - determine if discovery has completed
278 * @ioc: per adatper instance
279 *
280 * Returns 1 when discovery completed, else zero.
281 */
282static int
283mpt_is_discovery_complete(MPT_ADAPTER *ioc)
284{
285 ConfigExtendedPageHeader_t hdr;
286 CONFIGPARMS cfg;
287 SasIOUnitPage0_t *buffer;
288 dma_addr_t dma_handle;
289 int rc = 0;
290
291 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
292 memset(&cfg, 0, sizeof(CONFIGPARMS));
293 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
294 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
295 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
296 cfg.cfghdr.ehdr = &hdr;
297 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
298
299 if ((mpt_config(ioc, &cfg)))
300 goto out;
301 if (!hdr.ExtPageLength)
302 goto out;
303
304 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
305 &dma_handle);
306 if (!buffer)
307 goto out;
308
309 cfg.physAddr = dma_handle;
310 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
311
312 if ((mpt_config(ioc, &cfg)))
313 goto out_free_consistent;
314
315 if (!(buffer->PhyData[0].PortFlags &
316 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
317 rc = 1;
318
319 out_free_consistent:
320 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
321 buffer, dma_handle);
322 out:
323 return rc;
324}
325
326/**
327 * mpt_fault_reset_work - work performed on workq after ioc fault
328 * @work: input argument, used to derive ioc
329 *
330**/
331static void
332mpt_fault_reset_work(struct work_struct *work)
333{
334 MPT_ADAPTER *ioc =
335 container_of(work, MPT_ADAPTER, fault_reset_work.work);
336 u32 ioc_raw_state;
337 int rc;
338 unsigned long flags;
339
340 if (ioc->ioc_reset_in_progress || !ioc->active)
341 goto out;
342
343 ioc_raw_state = mpt_GetIocState(ioc, 0);
344 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
345 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
346 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
347 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
348 ioc->name, __func__);
349 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
350 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
351 __func__, (rc == 0) ? "success" : "failed");
352 ioc_raw_state = mpt_GetIocState(ioc, 0);
353 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
354 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
355 "reset (%04xh)\n", ioc->name, ioc_raw_state &
356 MPI_DOORBELL_DATA_MASK);
357 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
358 if ((mpt_is_discovery_complete(ioc))) {
359 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
360 "discovery_quiesce_io flag\n", ioc->name));
361 ioc->sas_discovery_quiesce_io = 0;
362 }
363 }
364
365 out:
366 /*
367 * Take turns polling alternate controller
368 */
369 if (ioc->alt_ioc)
370 ioc = ioc->alt_ioc;
371
372 /* rearm the timer */
373 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
374 if (ioc->reset_work_q)
375 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
376 msecs_to_jiffies(MPT_POLLING_INTERVAL));
377 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
378}
379
380
381/*
382 * Process turbo (context) reply...
383 */
384static void
385mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
386{
387 MPT_FRAME_HDR *mf = NULL;
388 MPT_FRAME_HDR *mr = NULL;
389 u16 req_idx = 0;
390 u8 cb_idx;
391
392 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
393 ioc->name, pa));
394
395 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
396 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
397 req_idx = pa & 0x0000FFFF;
398 cb_idx = (pa & 0x00FF0000) >> 16;
399 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
400 break;
401 case MPI_CONTEXT_REPLY_TYPE_LAN:
402 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
403 /*
404 * Blind set of mf to NULL here was fatal
405 * after lan_reply says "freeme"
406 * Fix sort of combined with an optimization here;
407 * added explicit check for case where lan_reply
408 * was just returning 1 and doing nothing else.
409 * For this case skip the callback, but set up
410 * proper mf value first here:-)
411 */
412 if ((pa & 0x58000000) == 0x58000000) {
413 req_idx = pa & 0x0000FFFF;
414 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
415 mpt_free_msg_frame(ioc, mf);
416 mb();
417 return;
418 break;
419 }
420 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
421 break;
422 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
423 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
424 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
425 break;
426 default:
427 cb_idx = 0;
428 BUG();
429 }
430
431 /* Check for (valid) IO callback! */
432 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
433 MptCallbacks[cb_idx] == NULL) {
434 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
435 __func__, ioc->name, cb_idx);
436 goto out;
437 }
438
439 if (MptCallbacks[cb_idx](ioc, mf, mr))
440 mpt_free_msg_frame(ioc, mf);
441 out:
442 mb();
443}
444
445static void
446mpt_reply(MPT_ADAPTER *ioc, u32 pa)
447{
448 MPT_FRAME_HDR *mf;
449 MPT_FRAME_HDR *mr;
450 u16 req_idx;
451 u8 cb_idx;
452 int freeme;
453
454 u32 reply_dma_low;
455 u16 ioc_stat;
456
457 /* non-TURBO reply! Hmmm, something may be up...
458 * Newest turbo reply mechanism; get address
459 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
460 */
461
462 /* Map DMA address of reply header to cpu address.
463 * pa is 32 bits - but the dma address may be 32 or 64 bits
464 * get offset based only only the low addresses
465 */
466
467 reply_dma_low = (pa <<= 1);
468 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
469 (reply_dma_low - ioc->reply_frames_low_dma));
470
471 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
472 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
473 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
474
475 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
476 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
477 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
478
479 /* Check/log IOC log info
480 */
481 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
482 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
483 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
484 if (ioc->bus_type == FC)
485 mpt_fc_log_info(ioc, log_info);
486 else if (ioc->bus_type == SPI)
487 mpt_spi_log_info(ioc, log_info);
488 else if (ioc->bus_type == SAS)
489 mpt_sas_log_info(ioc, log_info, cb_idx);
490 }
491
492 if (ioc_stat & MPI_IOCSTATUS_MASK)
493 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
494
495 /* Check for (valid) IO callback! */
496 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
497 MptCallbacks[cb_idx] == NULL) {
498 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
499 __func__, ioc->name, cb_idx);
500 freeme = 0;
501 goto out;
502 }
503
504 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
505
506 out:
507 /* Flush (non-TURBO) reply with a WRITE! */
508 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
509
510 if (freeme)
511 mpt_free_msg_frame(ioc, mf);
512 mb();
513}
514
515/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
516/**
517 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
518 * @irq: irq number (not used)
519 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
520 *
521 * This routine is registered via the request_irq() kernel API call,
522 * and handles all interrupts generated from a specific MPT adapter
523 * (also referred to as a IO Controller or IOC).
524 * This routine must clear the interrupt from the adapter and does
525 * so by reading the reply FIFO. Multiple replies may be processed
526 * per single call to this routine.
527 *
528 * This routine handles register-level access of the adapter but
529 * dispatches (calls) a protocol-specific callback routine to handle
530 * the protocol-specific details of the MPT request completion.
531 */
532static irqreturn_t
533mpt_interrupt(int irq, void *bus_id)
534{
535 MPT_ADAPTER *ioc = bus_id;
536 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
537
538 if (pa == 0xFFFFFFFF)
539 return IRQ_NONE;
540
541 /*
542 * Drain the reply FIFO!
543 */
544 do {
545 if (pa & MPI_ADDRESS_REPLY_A_BIT)
546 mpt_reply(ioc, pa);
547 else
548 mpt_turbo_reply(ioc, pa);
549 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
550 } while (pa != 0xFFFFFFFF);
551
552 return IRQ_HANDLED;
553}
554
555/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
556/**
557 * mptbase_reply - MPT base driver's callback routine
558 * @ioc: Pointer to MPT_ADAPTER structure
559 * @req: Pointer to original MPT request frame
560 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
561 *
562 * MPT base driver's callback routine; all base driver
563 * "internal" request/reply processing is routed here.
564 * Currently used for EventNotification and EventAck handling.
565 *
566 * Returns 1 indicating original alloc'd request frame ptr
567 * should be freed, or 0 if it shouldn't.
568 */
569static int
570mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
571{
572 EventNotificationReply_t *pEventReply;
573 u8 event;
574 int evHandlers;
575 int freereq = 1;
576
577 switch (reply->u.hdr.Function) {
578 case MPI_FUNCTION_EVENT_NOTIFICATION:
579 pEventReply = (EventNotificationReply_t *)reply;
580 evHandlers = 0;
581 ProcessEventNotification(ioc, pEventReply, &evHandlers);
582 event = le32_to_cpu(pEventReply->Event) & 0xFF;
583 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
584 freereq = 0;
585 if (event != MPI_EVENT_EVENT_CHANGE)
586 break;
587 case MPI_FUNCTION_CONFIG:
588 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
589 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
590 if (reply) {
591 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
592 memcpy(ioc->mptbase_cmds.reply, reply,
593 min(MPT_DEFAULT_FRAME_SIZE,
594 4 * reply->u.reply.MsgLength));
595 }
596 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
597 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
598 complete(&ioc->mptbase_cmds.done);
599 } else
600 freereq = 0;
601 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
602 freereq = 1;
603 break;
604 case MPI_FUNCTION_EVENT_ACK:
605 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
606 "EventAck reply received\n", ioc->name));
607 break;
608 default:
609 printk(MYIOC_s_ERR_FMT
610 "Unexpected msg function (=%02Xh) reply received!\n",
611 ioc->name, reply->u.hdr.Function);
612 break;
613 }
614
615 /*
616 * Conditionally tell caller to free the original
617 * EventNotification/EventAck/unexpected request frame!
618 */
619 return freereq;
620}
621
622/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
623/**
624 * mpt_register - Register protocol-specific main callback handler.
625 * @cbfunc: callback function pointer
626 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
627 * @func_name: call function's name
628 *
629 * This routine is called by a protocol-specific driver (SCSI host,
630 * LAN, SCSI target) to register its reply callback routine. Each
631 * protocol-specific driver must do this before it will be able to
632 * use any IOC resources, such as obtaining request frames.
633 *
634 * NOTES: The SCSI protocol driver currently calls this routine thrice
635 * in order to register separate callbacks; one for "normal" SCSI IO;
636 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
637 *
638 * Returns u8 valued "handle" in the range (and S.O.D. order)
639 * {N,...,7,6,5,...,1} if successful.
640 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
641 * considered an error by the caller.
642 */
643u8
644mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
645{
646 u8 cb_idx;
647 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
648
649 /*
650 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
651 * (slot/handle 0 is reserved!)
652 */
653 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
654 if (MptCallbacks[cb_idx] == NULL) {
655 MptCallbacks[cb_idx] = cbfunc;
656 MptDriverClass[cb_idx] = dclass;
657 MptEvHandlers[cb_idx] = NULL;
658 last_drv_idx = cb_idx;
659 memcpy(MptCallbacksName[cb_idx], func_name,
660 strlen(func_name) > 50 ? 50 : strlen(func_name));
661 break;
662 }
663 }
664
665 return last_drv_idx;
666}
667
668/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
669/**
670 * mpt_deregister - Deregister a protocol drivers resources.
671 * @cb_idx: previously registered callback handle
672 *
673 * Each protocol-specific driver should call this routine when its
674 * module is unloaded.
675 */
676void
677mpt_deregister(u8 cb_idx)
678{
679 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
680 MptCallbacks[cb_idx] = NULL;
681 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
682 MptEvHandlers[cb_idx] = NULL;
683
684 last_drv_idx++;
685 }
686}
687
688/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
689/**
690 * mpt_event_register - Register protocol-specific event callback handler.
691 * @cb_idx: previously registered (via mpt_register) callback handle
692 * @ev_cbfunc: callback function
693 *
694 * This routine can be called by one or more protocol-specific drivers
695 * if/when they choose to be notified of MPT events.
696 *
697 * Returns 0 for success.
698 */
699int
700mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
701{
702 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
703 return -1;
704
705 MptEvHandlers[cb_idx] = ev_cbfunc;
706 return 0;
707}
708
709/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
710/**
711 * mpt_event_deregister - Deregister protocol-specific event callback handler
712 * @cb_idx: previously registered callback handle
713 *
714 * Each protocol-specific driver should call this routine
715 * when it does not (or can no longer) handle events,
716 * or when its module is unloaded.
717 */
718void
719mpt_event_deregister(u8 cb_idx)
720{
721 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
722 return;
723
724 MptEvHandlers[cb_idx] = NULL;
725}
726
727/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
728/**
729 * mpt_reset_register - Register protocol-specific IOC reset handler.
730 * @cb_idx: previously registered (via mpt_register) callback handle
731 * @reset_func: reset function
732 *
733 * This routine can be called by one or more protocol-specific drivers
734 * if/when they choose to be notified of IOC resets.
735 *
736 * Returns 0 for success.
737 */
738int
739mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
740{
741 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
742 return -1;
743
744 MptResetHandlers[cb_idx] = reset_func;
745 return 0;
746}
747
748/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
749/**
750 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
751 * @cb_idx: previously registered callback handle
752 *
753 * Each protocol-specific driver should call this routine
754 * when it does not (or can no longer) handle IOC reset handling,
755 * or when its module is unloaded.
756 */
757void
758mpt_reset_deregister(u8 cb_idx)
759{
760 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
761 return;
762
763 MptResetHandlers[cb_idx] = NULL;
764}
765
766/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
767/**
768 * mpt_device_driver_register - Register device driver hooks
769 * @dd_cbfunc: driver callbacks struct
770 * @cb_idx: MPT protocol driver index
771 */
772int
773mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
774{
775 MPT_ADAPTER *ioc;
776 const struct pci_device_id *id;
777
778 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
779 return -EINVAL;
780
781 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
782
783 /* call per pci device probe entry point */
784 list_for_each_entry(ioc, &ioc_list, list) {
785 id = ioc->pcidev->driver ?
786 ioc->pcidev->driver->id_table : NULL;
787 if (dd_cbfunc->probe)
788 dd_cbfunc->probe(ioc->pcidev, id);
789 }
790
791 return 0;
792}
793
794/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
795/**
796 * mpt_device_driver_deregister - DeRegister device driver hooks
797 * @cb_idx: MPT protocol driver index
798 */
799void
800mpt_device_driver_deregister(u8 cb_idx)
801{
802 struct mpt_pci_driver *dd_cbfunc;
803 MPT_ADAPTER *ioc;
804
805 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
806 return;
807
808 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
809
810 list_for_each_entry(ioc, &ioc_list, list) {
811 if (dd_cbfunc->remove)
812 dd_cbfunc->remove(ioc->pcidev);
813 }
814
815 MptDeviceDriverHandlers[cb_idx] = NULL;
816}
817
818
819/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
820/**
821 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
822 * @cb_idx: Handle of registered MPT protocol driver
823 * @ioc: Pointer to MPT adapter structure
824 *
825 * Obtain an MPT request frame from the pool (of 1024) that are
826 * allocated per MPT adapter.
827 *
828 * Returns pointer to a MPT request frame or %NULL if none are available
829 * or IOC is not active.
830 */
831MPT_FRAME_HDR*
832mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
833{
834 MPT_FRAME_HDR *mf;
835 unsigned long flags;
836 u16 req_idx; /* Request index */
837
838 /* validate handle and ioc identifier */
839
840#ifdef MFCNT
841 if (!ioc->active)
842 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
843 "returning NULL!\n", ioc->name);
844#endif
845
846 /* If interrupts are not attached, do not return a request frame */
847 if (!ioc->active)
848 return NULL;
849
850 spin_lock_irqsave(&ioc->FreeQlock, flags);
851 if (!list_empty(&ioc->FreeQ)) {
852 int req_offset;
853
854 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
855 u.frame.linkage.list);
856 list_del(&mf->u.frame.linkage.list);
857 mf->u.frame.linkage.arg1 = 0;
858 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
859 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
860 /* u16! */
861 req_idx = req_offset / ioc->req_sz;
862 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
863 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
864 /* Default, will be changed if necessary in SG generation */
865 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
866#ifdef MFCNT
867 ioc->mfcnt++;
868#endif
869 }
870 else
871 mf = NULL;
872 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
873
874#ifdef MFCNT
875 if (mf == NULL)
876 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
877 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
878 ioc->req_depth);
879 mfcounter++;
880 if (mfcounter == PRINT_MF_COUNT)
881 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
882 ioc->mfcnt, ioc->req_depth);
883#endif
884
885 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
886 ioc->name, cb_idx, ioc->id, mf));
887 return mf;
888}
889
890/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
891/**
892 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
893 * @cb_idx: Handle of registered MPT protocol driver
894 * @ioc: Pointer to MPT adapter structure
895 * @mf: Pointer to MPT request frame
896 *
897 * This routine posts an MPT request frame to the request post FIFO of a
898 * specific MPT adapter.
899 */
900void
901mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
902{
903 u32 mf_dma_addr;
904 int req_offset;
905 u16 req_idx; /* Request index */
906
907 /* ensure values are reset properly! */
908 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
909 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
910 /* u16! */
911 req_idx = req_offset / ioc->req_sz;
912 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
913 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
914
915 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
916
917 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
918 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
919 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
920 ioc->RequestNB[req_idx]));
921 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
922}
923
924/**
925 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
926 * @cb_idx: Handle of registered MPT protocol driver
927 * @ioc: Pointer to MPT adapter structure
928 * @mf: Pointer to MPT request frame
929 *
930 * Send a protocol-specific MPT request frame to an IOC using
931 * hi-priority request queue.
932 *
933 * This routine posts an MPT request frame to the request post FIFO of a
934 * specific MPT adapter.
935 **/
936void
937mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
938{
939 u32 mf_dma_addr;
940 int req_offset;
941 u16 req_idx; /* Request index */
942
943 /* ensure values are reset properly! */
944 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
945 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
946 req_idx = req_offset / ioc->req_sz;
947 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
948 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
949
950 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
951
952 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
953 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
954 ioc->name, mf_dma_addr, req_idx));
955 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
956}
957
958/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
959/**
960 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
961 * @ioc: Pointer to MPT adapter structure
962 * @mf: Pointer to MPT request frame
963 *
964 * This routine places a MPT request frame back on the MPT adapter's
965 * FreeQ.
966 */
967void
968mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
969{
970 unsigned long flags;
971
972 /* Put Request back on FreeQ! */
973 spin_lock_irqsave(&ioc->FreeQlock, flags);
974 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
975 goto out;
976 /* signature to know if this mf is freed */
977 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
978 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
979#ifdef MFCNT
980 ioc->mfcnt--;
981#endif
982 out:
983 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
984}
985
986/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
987/**
988 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
989 * @pAddr: virtual address for SGE
990 * @flagslength: SGE flags and data transfer length
991 * @dma_addr: Physical address
992 *
993 * This routine places a MPT request frame back on the MPT adapter's
994 * FreeQ.
995 */
996static void
997mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
998{
999 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1000 pSge->FlagsLength = cpu_to_le32(flagslength);
1001 pSge->Address = cpu_to_le32(dma_addr);
1002}
1003
1004/**
1005 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1006 * @pAddr: virtual address for SGE
1007 * @flagslength: SGE flags and data transfer length
1008 * @dma_addr: Physical address
1009 *
1010 * This routine places a MPT request frame back on the MPT adapter's
1011 * FreeQ.
1012 **/
1013static void
1014mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1015{
1016 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1017 pSge->Address.Low = cpu_to_le32
1018 (lower_32_bits(dma_addr));
1019 pSge->Address.High = cpu_to_le32
1020 (upper_32_bits(dma_addr));
1021 pSge->FlagsLength = cpu_to_le32
1022 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1023}
1024
1025/**
1026 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1027 * @pAddr: virtual address for SGE
1028 * @flagslength: SGE flags and data transfer length
1029 * @dma_addr: Physical address
1030 *
1031 * This routine places a MPT request frame back on the MPT adapter's
1032 * FreeQ.
1033 **/
1034static void
1035mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1036{
1037 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1038 u32 tmp;
1039
1040 pSge->Address.Low = cpu_to_le32
1041 (lower_32_bits(dma_addr));
1042 tmp = (u32)(upper_32_bits(dma_addr));
1043
1044 /*
1045 * 1078 errata workaround for the 36GB limitation
1046 */
1047 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1048 flagslength |=
1049 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1050 tmp |= (1<<31);
1051 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1052 printk(KERN_DEBUG "1078 P0M2 addressing for "
1053 "addr = 0x%llx len = %d\n",
1054 (unsigned long long)dma_addr,
1055 MPI_SGE_LENGTH(flagslength));
1056 }
1057
1058 pSge->Address.High = cpu_to_le32(tmp);
1059 pSge->FlagsLength = cpu_to_le32(
1060 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1061}
1062
1063/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1064/**
1065 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1066 * @pAddr: virtual address for SGE
1067 * @next: nextChainOffset value (u32's)
1068 * @length: length of next SGL segment
1069 * @dma_addr: Physical address
1070 *
1071 */
1072static void
1073mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1074{
1075 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1076 pChain->Length = cpu_to_le16(length);
1077 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1078 pChain->NextChainOffset = next;
1079 pChain->Address = cpu_to_le32(dma_addr);
1080}
1081
1082/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1083/**
1084 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1085 * @pAddr: virtual address for SGE
1086 * @next: nextChainOffset value (u32's)
1087 * @length: length of next SGL segment
1088 * @dma_addr: Physical address
1089 *
1090 */
1091static void
1092mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1093{
1094 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1095 u32 tmp = dma_addr & 0xFFFFFFFF;
1096
1097 pChain->Length = cpu_to_le16(length);
1098 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1099 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1100
1101 pChain->NextChainOffset = next;
1102
1103 pChain->Address.Low = cpu_to_le32(tmp);
1104 tmp = (u32)(upper_32_bits(dma_addr));
1105 pChain->Address.High = cpu_to_le32(tmp);
1106}
1107
1108/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1109/**
1110 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1111 * @cb_idx: Handle of registered MPT protocol driver
1112 * @ioc: Pointer to MPT adapter structure
1113 * @reqBytes: Size of the request in bytes
1114 * @req: Pointer to MPT request frame
1115 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1116 *
1117 * This routine is used exclusively to send MptScsiTaskMgmt
1118 * requests since they are required to be sent via doorbell handshake.
1119 *
1120 * NOTE: It is the callers responsibility to byte-swap fields in the
1121 * request which are greater than 1 byte in size.
1122 *
1123 * Returns 0 for success, non-zero for failure.
1124 */
1125int
1126mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1127{
1128 int r = 0;
1129 u8 *req_as_bytes;
1130 int ii;
1131
1132 /* State is known to be good upon entering
1133 * this function so issue the bus reset
1134 * request.
1135 */
1136
1137 /*
1138 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1139 * setting cb_idx/req_idx. But ONLY if this request
1140 * is in proper (pre-alloc'd) request buffer range...
1141 */
1142 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1143 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1144 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1145 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1146 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1147 }
1148
1149 /* Make sure there are no doorbells */
1150 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1151
1152 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1153 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1154 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1155
1156 /* Wait for IOC doorbell int */
1157 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1158 return ii;
1159 }
1160
1161 /* Read doorbell and check for active bit */
1162 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1163 return -5;
1164
1165 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1166 ioc->name, ii));
1167
1168 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1169
1170 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1171 return -2;
1172 }
1173
1174 /* Send request via doorbell handshake */
1175 req_as_bytes = (u8 *) req;
1176 for (ii = 0; ii < reqBytes/4; ii++) {
1177 u32 word;
1178
1179 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1180 (req_as_bytes[(ii*4) + 1] << 8) |
1181 (req_as_bytes[(ii*4) + 2] << 16) |
1182 (req_as_bytes[(ii*4) + 3] << 24));
1183 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1184 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1185 r = -3;
1186 break;
1187 }
1188 }
1189
1190 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1191 r = 0;
1192 else
1193 r = -4;
1194
1195 /* Make sure there are no doorbells */
1196 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1197
1198 return r;
1199}
1200
1201/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1202/**
1203 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1204 * @ioc: Pointer to MPT adapter structure
1205 * @access_control_value: define bits below
1206 * @sleepFlag: Specifies whether the process can sleep
1207 *
1208 * Provides mechanism for the host driver to control the IOC's
1209 * Host Page Buffer access.
1210 *
1211 * Access Control Value - bits[15:12]
1212 * 0h Reserved
1213 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1214 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1215 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1216 *
1217 * Returns 0 for success, non-zero for failure.
1218 */
1219
1220static int
1221mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1222{
1223 int r = 0;
1224
1225 /* return if in use */
1226 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1227 & MPI_DOORBELL_ACTIVE)
1228 return -1;
1229
1230 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1231
1232 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1233 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1234 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1235 (access_control_value<<12)));
1236
1237 /* Wait for IOC to clear Doorbell Status bit */
1238 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1239 return -2;
1240 }else
1241 return 0;
1242}
1243
1244/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1245/**
1246 * mpt_host_page_alloc - allocate system memory for the fw
1247 * @ioc: Pointer to pointer to IOC adapter
1248 * @ioc_init: Pointer to ioc init config page
1249 *
1250 * If we already allocated memory in past, then resend the same pointer.
1251 * Returns 0 for success, non-zero for failure.
1252 */
1253static int
1254mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1255{
1256 char *psge;
1257 int flags_length;
1258 u32 host_page_buffer_sz=0;
1259
1260 if(!ioc->HostPageBuffer) {
1261
1262 host_page_buffer_sz =
1263 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1264
1265 if(!host_page_buffer_sz)
1266 return 0; /* fw doesn't need any host buffers */
1267
1268 /* spin till we get enough memory */
1269 while(host_page_buffer_sz > 0) {
1270
1271 if((ioc->HostPageBuffer = pci_alloc_consistent(
1272 ioc->pcidev,
1273 host_page_buffer_sz,
1274 &ioc->HostPageBuffer_dma)) != NULL) {
1275
1276 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1277 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1278 ioc->name, ioc->HostPageBuffer,
1279 (u32)ioc->HostPageBuffer_dma,
1280 host_page_buffer_sz));
1281 ioc->alloc_total += host_page_buffer_sz;
1282 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1283 break;
1284 }
1285
1286 host_page_buffer_sz -= (4*1024);
1287 }
1288 }
1289
1290 if(!ioc->HostPageBuffer) {
1291 printk(MYIOC_s_ERR_FMT
1292 "Failed to alloc memory for host_page_buffer!\n",
1293 ioc->name);
1294 return -999;
1295 }
1296
1297 psge = (char *)&ioc_init->HostPageBufferSGE;
1298 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1299 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1300 MPI_SGE_FLAGS_HOST_TO_IOC |
1301 MPI_SGE_FLAGS_END_OF_BUFFER;
1302 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1303 flags_length |= ioc->HostPageBuffer_sz;
1304 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1305 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1306
1307return 0;
1308}
1309
1310/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1311/**
1312 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1313 * @iocid: IOC unique identifier (integer)
1314 * @iocpp: Pointer to pointer to IOC adapter
1315 *
1316 * Given a unique IOC identifier, set pointer to the associated MPT
1317 * adapter structure.
1318 *
1319 * Returns iocid and sets iocpp if iocid is found.
1320 * Returns -1 if iocid is not found.
1321 */
1322int
1323mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1324{
1325 MPT_ADAPTER *ioc;
1326
1327 list_for_each_entry(ioc,&ioc_list,list) {
1328 if (ioc->id == iocid) {
1329 *iocpp =ioc;
1330 return iocid;
1331 }
1332 }
1333
1334 *iocpp = NULL;
1335 return -1;
1336}
1337
1338/**
1339 * mpt_get_product_name - returns product string
1340 * @vendor: pci vendor id
1341 * @device: pci device id
1342 * @revision: pci revision id
1343 * @prod_name: string returned
1344 *
1345 * Returns product string displayed when driver loads,
1346 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1347 *
1348 **/
1349static void
1350mpt_get_product_name(u16 vendor, u16 device, u8 revision, char *prod_name)
1351{
1352 char *product_str = NULL;
1353
1354 if (vendor == PCI_VENDOR_ID_BROCADE) {
1355 switch (device)
1356 {
1357 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1358 switch (revision)
1359 {
1360 case 0x00:
1361 product_str = "BRE040 A0";
1362 break;
1363 case 0x01:
1364 product_str = "BRE040 A1";
1365 break;
1366 default:
1367 product_str = "BRE040";
1368 break;
1369 }
1370 break;
1371 }
1372 goto out;
1373 }
1374
1375 switch (device)
1376 {
1377 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1378 product_str = "LSIFC909 B1";
1379 break;
1380 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1381 product_str = "LSIFC919 B0";
1382 break;
1383 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1384 product_str = "LSIFC929 B0";
1385 break;
1386 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1387 if (revision < 0x80)
1388 product_str = "LSIFC919X A0";
1389 else
1390 product_str = "LSIFC919XL A1";
1391 break;
1392 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1393 if (revision < 0x80)
1394 product_str = "LSIFC929X A0";
1395 else
1396 product_str = "LSIFC929XL A1";
1397 break;
1398 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1399 product_str = "LSIFC939X A1";
1400 break;
1401 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1402 product_str = "LSIFC949X A1";
1403 break;
1404 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1405 switch (revision)
1406 {
1407 case 0x00:
1408 product_str = "LSIFC949E A0";
1409 break;
1410 case 0x01:
1411 product_str = "LSIFC949E A1";
1412 break;
1413 default:
1414 product_str = "LSIFC949E";
1415 break;
1416 }
1417 break;
1418 case MPI_MANUFACTPAGE_DEVID_53C1030:
1419 switch (revision)
1420 {
1421 case 0x00:
1422 product_str = "LSI53C1030 A0";
1423 break;
1424 case 0x01:
1425 product_str = "LSI53C1030 B0";
1426 break;
1427 case 0x03:
1428 product_str = "LSI53C1030 B1";
1429 break;
1430 case 0x07:
1431 product_str = "LSI53C1030 B2";
1432 break;
1433 case 0x08:
1434 product_str = "LSI53C1030 C0";
1435 break;
1436 case 0x80:
1437 product_str = "LSI53C1030T A0";
1438 break;
1439 case 0x83:
1440 product_str = "LSI53C1030T A2";
1441 break;
1442 case 0x87:
1443 product_str = "LSI53C1030T A3";
1444 break;
1445 case 0xc1:
1446 product_str = "LSI53C1020A A1";
1447 break;
1448 default:
1449 product_str = "LSI53C1030";
1450 break;
1451 }
1452 break;
1453 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1454 switch (revision)
1455 {
1456 case 0x03:
1457 product_str = "LSI53C1035 A2";
1458 break;
1459 case 0x04:
1460 product_str = "LSI53C1035 B0";
1461 break;
1462 default:
1463 product_str = "LSI53C1035";
1464 break;
1465 }
1466 break;
1467 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1468 switch (revision)
1469 {
1470 case 0x00:
1471 product_str = "LSISAS1064 A1";
1472 break;
1473 case 0x01:
1474 product_str = "LSISAS1064 A2";
1475 break;
1476 case 0x02:
1477 product_str = "LSISAS1064 A3";
1478 break;
1479 case 0x03:
1480 product_str = "LSISAS1064 A4";
1481 break;
1482 default:
1483 product_str = "LSISAS1064";
1484 break;
1485 }
1486 break;
1487 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1488 switch (revision)
1489 {
1490 case 0x00:
1491 product_str = "LSISAS1064E A0";
1492 break;
1493 case 0x01:
1494 product_str = "LSISAS1064E B0";
1495 break;
1496 case 0x02:
1497 product_str = "LSISAS1064E B1";
1498 break;
1499 case 0x04:
1500 product_str = "LSISAS1064E B2";
1501 break;
1502 case 0x08:
1503 product_str = "LSISAS1064E B3";
1504 break;
1505 default:
1506 product_str = "LSISAS1064E";
1507 break;
1508 }
1509 break;
1510 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1511 switch (revision)
1512 {
1513 case 0x00:
1514 product_str = "LSISAS1068 A0";
1515 break;
1516 case 0x01:
1517 product_str = "LSISAS1068 B0";
1518 break;
1519 case 0x02:
1520 product_str = "LSISAS1068 B1";
1521 break;
1522 default:
1523 product_str = "LSISAS1068";
1524 break;
1525 }
1526 break;
1527 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1528 switch (revision)
1529 {
1530 case 0x00:
1531 product_str = "LSISAS1068E A0";
1532 break;
1533 case 0x01:
1534 product_str = "LSISAS1068E B0";
1535 break;
1536 case 0x02:
1537 product_str = "LSISAS1068E B1";
1538 break;
1539 case 0x04:
1540 product_str = "LSISAS1068E B2";
1541 break;
1542 case 0x08:
1543 product_str = "LSISAS1068E B3";
1544 break;
1545 default:
1546 product_str = "LSISAS1068E";
1547 break;
1548 }
1549 break;
1550 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1551 switch (revision)
1552 {
1553 case 0x00:
1554 product_str = "LSISAS1078 A0";
1555 break;
1556 case 0x01:
1557 product_str = "LSISAS1078 B0";
1558 break;
1559 case 0x02:
1560 product_str = "LSISAS1078 C0";
1561 break;
1562 case 0x03:
1563 product_str = "LSISAS1078 C1";
1564 break;
1565 case 0x04:
1566 product_str = "LSISAS1078 C2";
1567 break;
1568 default:
1569 product_str = "LSISAS1078";
1570 break;
1571 }
1572 break;
1573 }
1574
1575 out:
1576 if (product_str)
1577 sprintf(prod_name, "%s", product_str);
1578}
1579
1580/**
1581 * mpt_mapresources - map in memory mapped io
1582 * @ioc: Pointer to pointer to IOC adapter
1583 *
1584 **/
1585static int
1586mpt_mapresources(MPT_ADAPTER *ioc)
1587{
1588 u8 __iomem *mem;
1589 int ii;
1590 resource_size_t mem_phys;
1591 unsigned long port;
1592 u32 msize;
1593 u32 psize;
1594 u8 revision;
1595 int r = -ENODEV;
1596 struct pci_dev *pdev;
1597
1598 pdev = ioc->pcidev;
1599 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1600 if (pci_enable_device_mem(pdev)) {
1601 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1602 "failed\n", ioc->name);
1603 return r;
1604 }
1605 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1606 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1607 "MEM failed\n", ioc->name);
1608 return r;
1609 }
1610
1611 pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
1612
1613 if (sizeof(dma_addr_t) > 4) {
1614 const uint64_t required_mask = dma_get_required_mask
1615 (&pdev->dev);
1616 if (required_mask > DMA_BIT_MASK(32)
1617 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1618 && !pci_set_consistent_dma_mask(pdev,
1619 DMA_BIT_MASK(64))) {
1620 ioc->dma_mask = DMA_BIT_MASK(64);
1621 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1622 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1623 ioc->name));
1624 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1625 && !pci_set_consistent_dma_mask(pdev,
1626 DMA_BIT_MASK(32))) {
1627 ioc->dma_mask = DMA_BIT_MASK(32);
1628 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1629 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1630 ioc->name));
1631 } else {
1632 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1633 ioc->name, pci_name(pdev));
1634 pci_release_selected_regions(pdev, ioc->bars);
1635 return r;
1636 }
1637 } else {
1638 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1639 && !pci_set_consistent_dma_mask(pdev,
1640 DMA_BIT_MASK(32))) {
1641 ioc->dma_mask = DMA_BIT_MASK(32);
1642 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1643 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1644 ioc->name));
1645 } else {
1646 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1647 ioc->name, pci_name(pdev));
1648 pci_release_selected_regions(pdev, ioc->bars);
1649 return r;
1650 }
1651 }
1652
1653 mem_phys = msize = 0;
1654 port = psize = 0;
1655 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1656 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1657 if (psize)
1658 continue;
1659 /* Get I/O space! */
1660 port = pci_resource_start(pdev, ii);
1661 psize = pci_resource_len(pdev, ii);
1662 } else {
1663 if (msize)
1664 continue;
1665 /* Get memmap */
1666 mem_phys = pci_resource_start(pdev, ii);
1667 msize = pci_resource_len(pdev, ii);
1668 }
1669 }
1670 ioc->mem_size = msize;
1671
1672 mem = NULL;
1673 /* Get logical ptr for PciMem0 space */
1674 /*mem = ioremap(mem_phys, msize);*/
1675 mem = ioremap(mem_phys, msize);
1676 if (mem == NULL) {
1677 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1678 " memory!\n", ioc->name);
1679 pci_release_selected_regions(pdev, ioc->bars);
1680 return -EINVAL;
1681 }
1682 ioc->memmap = mem;
1683 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1684 ioc->name, mem, (unsigned long long)mem_phys));
1685
1686 ioc->mem_phys = mem_phys;
1687 ioc->chip = (SYSIF_REGS __iomem *)mem;
1688
1689 /* Save Port IO values in case we need to do downloadboot */
1690 ioc->pio_mem_phys = port;
1691 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1692
1693 return 0;
1694}
1695
1696/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1697/**
1698 * mpt_attach - Install a PCI intelligent MPT adapter.
1699 * @pdev: Pointer to pci_dev structure
1700 * @id: PCI device ID information
1701 *
1702 * This routine performs all the steps necessary to bring the IOC of
1703 * a MPT adapter to a OPERATIONAL state. This includes registering
1704 * memory regions, registering the interrupt, and allocating request
1705 * and reply memory pools.
1706 *
1707 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1708 * MPT adapter.
1709 *
1710 * Returns 0 for success, non-zero for failure.
1711 *
1712 * TODO: Add support for polled controllers
1713 */
1714int
1715mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1716{
1717 MPT_ADAPTER *ioc;
1718 u8 cb_idx;
1719 int r = -ENODEV;
1720 u8 revision;
1721 u8 pcixcmd;
1722 static int mpt_ids = 0;
1723#ifdef CONFIG_PROC_FS
1724 struct proc_dir_entry *dent;
1725#endif
1726
1727 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1728 if (ioc == NULL) {
1729 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1730 return -ENOMEM;
1731 }
1732
1733 ioc->id = mpt_ids++;
1734 sprintf(ioc->name, "ioc%d", ioc->id);
1735 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1736
1737 /*
1738 * set initial debug level
1739 * (refer to mptdebug.h)
1740 *
1741 */
1742 ioc->debug_level = mpt_debug_level;
1743 if (mpt_debug_level)
1744 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1745
1746 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1747
1748 ioc->pcidev = pdev;
1749 if (mpt_mapresources(ioc)) {
1750 kfree(ioc);
1751 return r;
1752 }
1753
1754 /*
1755 * Setting up proper handlers for scatter gather handling
1756 */
1757 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1758 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1759 ioc->add_sge = &mpt_add_sge_64bit_1078;
1760 else
1761 ioc->add_sge = &mpt_add_sge_64bit;
1762 ioc->add_chain = &mpt_add_chain_64bit;
1763 ioc->sg_addr_size = 8;
1764 } else {
1765 ioc->add_sge = &mpt_add_sge;
1766 ioc->add_chain = &mpt_add_chain;
1767 ioc->sg_addr_size = 4;
1768 }
1769 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1770
1771 ioc->alloc_total = sizeof(MPT_ADAPTER);
1772 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1773 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1774
1775
1776 spin_lock_init(&ioc->taskmgmt_lock);
1777 mutex_init(&ioc->internal_cmds.mutex);
1778 init_completion(&ioc->internal_cmds.done);
1779 mutex_init(&ioc->mptbase_cmds.mutex);
1780 init_completion(&ioc->mptbase_cmds.done);
1781 mutex_init(&ioc->taskmgmt_cmds.mutex);
1782 init_completion(&ioc->taskmgmt_cmds.done);
1783
1784 /* Initialize the event logging.
1785 */
1786 ioc->eventTypes = 0; /* None */
1787 ioc->eventContext = 0;
1788 ioc->eventLogSize = 0;
1789 ioc->events = NULL;
1790
1791#ifdef MFCNT
1792 ioc->mfcnt = 0;
1793#endif
1794
1795 ioc->sh = NULL;
1796 ioc->cached_fw = NULL;
1797
1798 /* Initialize SCSI Config Data structure
1799 */
1800 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1801
1802 /* Initialize the fc rport list head.
1803 */
1804 INIT_LIST_HEAD(&ioc->fc_rports);
1805
1806 /* Find lookup slot. */
1807 INIT_LIST_HEAD(&ioc->list);
1808
1809
1810 /* Initialize workqueue */
1811 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1812
1813 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1814 "mpt_poll_%d", ioc->id);
1815 ioc->reset_work_q =
1816 create_singlethread_workqueue(ioc->reset_work_q_name);
1817 if (!ioc->reset_work_q) {
1818 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1819 ioc->name);
1820 pci_release_selected_regions(pdev, ioc->bars);
1821 kfree(ioc);
1822 return -ENOMEM;
1823 }
1824
1825 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1826 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1827
1828 pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
1829 mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name);
1830
1831 switch (pdev->device)
1832 {
1833 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1834 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1835 ioc->errata_flag_1064 = 1;
1836 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1837 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1838 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1839 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1840 ioc->bus_type = FC;
1841 break;
1842
1843 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1844 if (revision < XL_929) {
1845 /* 929X Chip Fix. Set Split transactions level
1846 * for PCIX. Set MOST bits to zero.
1847 */
1848 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1849 pcixcmd &= 0x8F;
1850 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1851 } else {
1852 /* 929XL Chip Fix. Set MMRBC to 0x08.
1853 */
1854 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1855 pcixcmd |= 0x08;
1856 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1857 }
1858 ioc->bus_type = FC;
1859 break;
1860
1861 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1862 /* 919X Chip Fix. Set Split transactions level
1863 * for PCIX. Set MOST bits to zero.
1864 */
1865 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1866 pcixcmd &= 0x8F;
1867 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1868 ioc->bus_type = FC;
1869 break;
1870
1871 case MPI_MANUFACTPAGE_DEVID_53C1030:
1872 /* 1030 Chip Fix. Disable Split transactions
1873 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1874 */
1875 if (revision < C0_1030) {
1876 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1877 pcixcmd &= 0x8F;
1878 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1879 }
1880
1881 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1882 ioc->bus_type = SPI;
1883 break;
1884
1885 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1886 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1887 ioc->errata_flag_1064 = 1;
1888 ioc->bus_type = SAS;
1889 break;
1890
1891 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1892 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1893 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1894 ioc->bus_type = SAS;
1895 break;
1896 }
1897
1898
1899 switch (ioc->bus_type) {
1900
1901 case SAS:
1902 ioc->msi_enable = mpt_msi_enable_sas;
1903 break;
1904
1905 case SPI:
1906 ioc->msi_enable = mpt_msi_enable_spi;
1907 break;
1908
1909 case FC:
1910 ioc->msi_enable = mpt_msi_enable_fc;
1911 break;
1912
1913 default:
1914 ioc->msi_enable = 0;
1915 break;
1916 }
1917
1918 ioc->fw_events_off = 1;
1919
1920 if (ioc->errata_flag_1064)
1921 pci_disable_io_access(pdev);
1922
1923 spin_lock_init(&ioc->FreeQlock);
1924
1925 /* Disable all! */
1926 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1927 ioc->active = 0;
1928 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1929
1930 /* Set IOC ptr in the pcidev's driver data. */
1931 pci_set_drvdata(ioc->pcidev, ioc);
1932
1933 /* Set lookup ptr. */
1934 list_add_tail(&ioc->list, &ioc_list);
1935
1936 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1937 */
1938 mpt_detect_bound_ports(ioc, pdev);
1939
1940 INIT_LIST_HEAD(&ioc->fw_event_list);
1941 spin_lock_init(&ioc->fw_event_lock);
1942 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
1943 ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
1944
1945 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
1946 CAN_SLEEP)) != 0){
1947 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
1948 ioc->name, r);
1949
1950 list_del(&ioc->list);
1951 if (ioc->alt_ioc)
1952 ioc->alt_ioc->alt_ioc = NULL;
1953 iounmap(ioc->memmap);
1954 if (r != -5)
1955 pci_release_selected_regions(pdev, ioc->bars);
1956
1957 destroy_workqueue(ioc->reset_work_q);
1958 ioc->reset_work_q = NULL;
1959
1960 kfree(ioc);
1961 pci_set_drvdata(pdev, NULL);
1962 return r;
1963 }
1964
1965 /* call per device driver probe entry point */
1966 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
1967 if(MptDeviceDriverHandlers[cb_idx] &&
1968 MptDeviceDriverHandlers[cb_idx]->probe) {
1969 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
1970 }
1971 }
1972
1973#ifdef CONFIG_PROC_FS
1974 /*
1975 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
1976 */
1977 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
1978 if (dent) {
1979 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
1980 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
1981 }
1982#endif
1983
1984 if (!ioc->alt_ioc)
1985 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
1986 msecs_to_jiffies(MPT_POLLING_INTERVAL));
1987
1988 return 0;
1989}
1990
1991/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1992/**
1993 * mpt_detach - Remove a PCI intelligent MPT adapter.
1994 * @pdev: Pointer to pci_dev structure
1995 */
1996
1997void
1998mpt_detach(struct pci_dev *pdev)
1999{
2000 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2001 char pname[32];
2002 u8 cb_idx;
2003 unsigned long flags;
2004 struct workqueue_struct *wq;
2005
2006 /*
2007 * Stop polling ioc for fault condition
2008 */
2009 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2010 wq = ioc->reset_work_q;
2011 ioc->reset_work_q = NULL;
2012 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2013 cancel_delayed_work(&ioc->fault_reset_work);
2014 destroy_workqueue(wq);
2015
2016 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2017 wq = ioc->fw_event_q;
2018 ioc->fw_event_q = NULL;
2019 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2020 destroy_workqueue(wq);
2021
2022 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2023 remove_proc_entry(pname, NULL);
2024 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2025 remove_proc_entry(pname, NULL);
2026 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2027 remove_proc_entry(pname, NULL);
2028
2029 /* call per device driver remove entry point */
2030 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2031 if(MptDeviceDriverHandlers[cb_idx] &&
2032 MptDeviceDriverHandlers[cb_idx]->remove) {
2033 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2034 }
2035 }
2036
2037 /* Disable interrupts! */
2038 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2039
2040 ioc->active = 0;
2041 synchronize_irq(pdev->irq);
2042
2043 /* Clear any lingering interrupt */
2044 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2045
2046 CHIPREG_READ32(&ioc->chip->IntStatus);
2047
2048 mpt_adapter_dispose(ioc);
2049
2050}
2051
2052/**************************************************************************
2053 * Power Management
2054 */
2055#ifdef CONFIG_PM
2056/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2057/**
2058 * mpt_suspend - Fusion MPT base driver suspend routine.
2059 * @pdev: Pointer to pci_dev structure
2060 * @state: new state to enter
2061 */
2062int
2063mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2064{
2065 u32 device_state;
2066 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2067
2068 device_state = pci_choose_state(pdev, state);
2069 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2070 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2071 device_state);
2072
2073 /* put ioc into READY_STATE */
2074 if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2075 printk(MYIOC_s_ERR_FMT
2076 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2077 }
2078
2079 /* disable interrupts */
2080 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2081 ioc->active = 0;
2082
2083 /* Clear any lingering interrupt */
2084 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2085
2086 free_irq(ioc->pci_irq, ioc);
2087 if (ioc->msi_enable)
2088 pci_disable_msi(ioc->pcidev);
2089 ioc->pci_irq = -1;
2090 pci_save_state(pdev);
2091 pci_disable_device(pdev);
2092 pci_release_selected_regions(pdev, ioc->bars);
2093 pci_set_power_state(pdev, device_state);
2094 return 0;
2095}
2096
2097/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2098/**
2099 * mpt_resume - Fusion MPT base driver resume routine.
2100 * @pdev: Pointer to pci_dev structure
2101 */
2102int
2103mpt_resume(struct pci_dev *pdev)
2104{
2105 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2106 u32 device_state = pdev->current_state;
2107 int recovery_state;
2108 int err;
2109
2110 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2111 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2112 device_state);
2113
2114 pci_set_power_state(pdev, PCI_D0);
2115 pci_enable_wake(pdev, PCI_D0, 0);
2116 pci_restore_state(pdev);
2117 ioc->pcidev = pdev;
2118 err = mpt_mapresources(ioc);
2119 if (err)
2120 return err;
2121
2122 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2123 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2124 ioc->add_sge = &mpt_add_sge_64bit_1078;
2125 else
2126 ioc->add_sge = &mpt_add_sge_64bit;
2127 ioc->add_chain = &mpt_add_chain_64bit;
2128 ioc->sg_addr_size = 8;
2129 } else {
2130
2131 ioc->add_sge = &mpt_add_sge;
2132 ioc->add_chain = &mpt_add_chain;
2133 ioc->sg_addr_size = 4;
2134 }
2135 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2136
2137 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2138 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2139 CHIPREG_READ32(&ioc->chip->Doorbell));
2140
2141 /*
2142 * Errata workaround for SAS pci express:
2143 * Upon returning to the D0 state, the contents of the doorbell will be
2144 * stale data, and this will incorrectly signal to the host driver that
2145 * the firmware is ready to process mpt commands. The workaround is
2146 * to issue a diagnostic reset.
2147 */
2148 if (ioc->bus_type == SAS && (pdev->device ==
2149 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2150 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2151 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2152 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2153 ioc->name);
2154 goto out;
2155 }
2156 }
2157
2158 /* bring ioc to operational state */
2159 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2160 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2161 CAN_SLEEP);
2162 if (recovery_state != 0)
2163 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2164 "error:[%x]\n", ioc->name, recovery_state);
2165 else
2166 printk(MYIOC_s_INFO_FMT
2167 "pci-resume: success\n", ioc->name);
2168 out:
2169 return 0;
2170
2171}
2172#endif
2173
2174static int
2175mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2176{
2177 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2178 ioc->bus_type != SPI) ||
2179 (MptDriverClass[index] == MPTFC_DRIVER &&
2180 ioc->bus_type != FC) ||
2181 (MptDriverClass[index] == MPTSAS_DRIVER &&
2182 ioc->bus_type != SAS))
2183 /* make sure we only call the relevant reset handler
2184 * for the bus */
2185 return 0;
2186 return (MptResetHandlers[index])(ioc, reset_phase);
2187}
2188
2189/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2190/**
2191 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2192 * @ioc: Pointer to MPT adapter structure
2193 * @reason: Event word / reason
2194 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2195 *
2196 * This routine performs all the steps necessary to bring the IOC
2197 * to a OPERATIONAL state.
2198 *
2199 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2200 * MPT adapter.
2201 *
2202 * Returns:
2203 * 0 for success
2204 * -1 if failed to get board READY
2205 * -2 if READY but IOCFacts Failed
2206 * -3 if READY but PrimeIOCFifos Failed
2207 * -4 if READY but IOCInit Failed
2208 * -5 if failed to enable_device and/or request_selected_regions
2209 * -6 if failed to upload firmware
2210 */
2211static int
2212mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2213{
2214 int hard_reset_done = 0;
2215 int alt_ioc_ready = 0;
2216 int hard;
2217 int rc=0;
2218 int ii;
2219 int ret = 0;
2220 int reset_alt_ioc_active = 0;
2221 int irq_allocated = 0;
2222 u8 *a;
2223
2224 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2225 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2226
2227 /* Disable reply interrupts (also blocks FreeQ) */
2228 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2229 ioc->active = 0;
2230
2231 if (ioc->alt_ioc) {
2232 if (ioc->alt_ioc->active ||
2233 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2234 reset_alt_ioc_active = 1;
2235 /* Disable alt-IOC's reply interrupts
2236 * (and FreeQ) for a bit
2237 **/
2238 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2239 0xFFFFFFFF);
2240 ioc->alt_ioc->active = 0;
2241 }
2242 }
2243
2244 hard = 1;
2245 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2246 hard = 0;
2247
2248 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2249 if (hard_reset_done == -4) {
2250 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2251 ioc->name);
2252
2253 if (reset_alt_ioc_active && ioc->alt_ioc) {
2254 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2255 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2256 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2257 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2258 ioc->alt_ioc->active = 1;
2259 }
2260
2261 } else {
2262 printk(MYIOC_s_WARN_FMT
2263 "NOT READY WARNING!\n", ioc->name);
2264 }
2265 ret = -1;
2266 goto out;
2267 }
2268
2269 /* hard_reset_done = 0 if a soft reset was performed
2270 * and 1 if a hard reset was performed.
2271 */
2272 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2273 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2274 alt_ioc_ready = 1;
2275 else
2276 printk(MYIOC_s_WARN_FMT
2277 ": alt-ioc Not ready WARNING!\n",
2278 ioc->alt_ioc->name);
2279 }
2280
2281 for (ii=0; ii<5; ii++) {
2282 /* Get IOC facts! Allow 5 retries */
2283 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2284 break;
2285 }
2286
2287
2288 if (ii == 5) {
2289 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2290 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2291 ret = -2;
2292 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2293 MptDisplayIocCapabilities(ioc);
2294 }
2295
2296 if (alt_ioc_ready) {
2297 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2298 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2299 "Initial Alt IocFacts failed rc=%x\n",
2300 ioc->name, rc));
2301 /* Retry - alt IOC was initialized once
2302 */
2303 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2304 }
2305 if (rc) {
2306 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2307 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2308 alt_ioc_ready = 0;
2309 reset_alt_ioc_active = 0;
2310 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2311 MptDisplayIocCapabilities(ioc->alt_ioc);
2312 }
2313 }
2314
2315 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2316 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2317 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2318 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2319 IORESOURCE_IO);
2320 if (pci_enable_device(ioc->pcidev))
2321 return -5;
2322 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2323 "mpt"))
2324 return -5;
2325 }
2326
2327 /*
2328 * Device is reset now. It must have de-asserted the interrupt line
2329 * (if it was asserted) and it should be safe to register for the
2330 * interrupt now.
2331 */
2332 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2333 ioc->pci_irq = -1;
2334 if (ioc->pcidev->irq) {
2335 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2336 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2337 ioc->name);
2338 else
2339 ioc->msi_enable = 0;
2340 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2341 IRQF_SHARED, ioc->name, ioc);
2342 if (rc < 0) {
2343 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2344 "interrupt %d!\n",
2345 ioc->name, ioc->pcidev->irq);
2346 if (ioc->msi_enable)
2347 pci_disable_msi(ioc->pcidev);
2348 ret = -EBUSY;
2349 goto out;
2350 }
2351 irq_allocated = 1;
2352 ioc->pci_irq = ioc->pcidev->irq;
2353 pci_set_master(ioc->pcidev); /* ?? */
2354 pci_set_drvdata(ioc->pcidev, ioc);
2355 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2356 "installed at interrupt %d\n", ioc->name,
2357 ioc->pcidev->irq));
2358 }
2359 }
2360
2361 /* Prime reply & request queues!
2362 * (mucho alloc's) Must be done prior to
2363 * init as upper addresses are needed for init.
2364 * If fails, continue with alt-ioc processing
2365 */
2366 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2367 ioc->name));
2368 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2369 ret = -3;
2370
2371 /* May need to check/upload firmware & data here!
2372 * If fails, continue with alt-ioc processing
2373 */
2374 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2375 ioc->name));
2376 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2377 ret = -4;
2378// NEW!
2379 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2380 printk(MYIOC_s_WARN_FMT
2381 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2382 ioc->alt_ioc->name, rc);
2383 alt_ioc_ready = 0;
2384 reset_alt_ioc_active = 0;
2385 }
2386
2387 if (alt_ioc_ready) {
2388 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2389 alt_ioc_ready = 0;
2390 reset_alt_ioc_active = 0;
2391 printk(MYIOC_s_WARN_FMT
2392 ": alt-ioc: (%d) init failure WARNING!\n",
2393 ioc->alt_ioc->name, rc);
2394 }
2395 }
2396
2397 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2398 if (ioc->upload_fw) {
2399 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2400 "firmware upload required!\n", ioc->name));
2401
2402 /* Controller is not operational, cannot do upload
2403 */
2404 if (ret == 0) {
2405 rc = mpt_do_upload(ioc, sleepFlag);
2406 if (rc == 0) {
2407 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2408 /*
2409 * Maintain only one pointer to FW memory
2410 * so there will not be two attempt to
2411 * downloadboot onboard dual function
2412 * chips (mpt_adapter_disable,
2413 * mpt_diag_reset)
2414 */
2415 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2416 "mpt_upload: alt_%s has cached_fw=%p \n",
2417 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2418 ioc->cached_fw = NULL;
2419 }
2420 } else {
2421 printk(MYIOC_s_WARN_FMT
2422 "firmware upload failure!\n", ioc->name);
2423 ret = -6;
2424 }
2425 }
2426 }
2427 }
2428
2429 /* Enable MPT base driver management of EventNotification
2430 * and EventAck handling.
2431 */
2432 if ((ret == 0) && (!ioc->facts.EventState)) {
2433 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2434 "SendEventNotification\n",
2435 ioc->name));
2436 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2437 }
2438
2439 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2440 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2441
2442 if (ret == 0) {
2443 /* Enable! (reply interrupt) */
2444 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2445 ioc->active = 1;
2446 }
2447 if (rc == 0) { /* alt ioc */
2448 if (reset_alt_ioc_active && ioc->alt_ioc) {
2449 /* (re)Enable alt-IOC! (reply interrupt) */
2450 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2451 "reply irq re-enabled\n",
2452 ioc->alt_ioc->name));
2453 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2454 MPI_HIM_DIM);
2455 ioc->alt_ioc->active = 1;
2456 }
2457 }
2458
2459
2460 /* Add additional "reason" check before call to GetLanConfigPages
2461 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2462 * recursive scenario; GetLanConfigPages times out, timer expired
2463 * routine calls HardResetHandler, which calls into here again,
2464 * and we try GetLanConfigPages again...
2465 */
2466 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2467
2468 /*
2469 * Initialize link list for inactive raid volumes.
2470 */
2471 mutex_init(&ioc->raid_data.inactive_list_mutex);
2472 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2473
2474 switch (ioc->bus_type) {
2475
2476 case SAS:
2477 /* clear persistency table */
2478 if(ioc->facts.IOCExceptions &
2479 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2480 ret = mptbase_sas_persist_operation(ioc,
2481 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2482 if(ret != 0)
2483 goto out;
2484 }
2485
2486 /* Find IM volumes
2487 */
2488 mpt_findImVolumes(ioc);
2489
2490 /* Check, and possibly reset, the coalescing value
2491 */
2492 mpt_read_ioc_pg_1(ioc);
2493
2494 break;
2495
2496 case FC:
2497 if ((ioc->pfacts[0].ProtocolFlags &
2498 MPI_PORTFACTS_PROTOCOL_LAN) &&
2499 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2500 /*
2501 * Pre-fetch the ports LAN MAC address!
2502 * (LANPage1_t stuff)
2503 */
2504 (void) GetLanConfigPages(ioc);
2505 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2506 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2507 "LanAddr = %02X:%02X:%02X"
2508 ":%02X:%02X:%02X\n",
2509 ioc->name, a[5], a[4],
2510 a[3], a[2], a[1], a[0]));
2511 }
2512 break;
2513
2514 case SPI:
2515 /* Get NVRAM and adapter maximums from SPP 0 and 2
2516 */
2517 mpt_GetScsiPortSettings(ioc, 0);
2518
2519 /* Get version and length of SDP 1
2520 */
2521 mpt_readScsiDevicePageHeaders(ioc, 0);
2522
2523 /* Find IM volumes
2524 */
2525 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2526 mpt_findImVolumes(ioc);
2527
2528 /* Check, and possibly reset, the coalescing value
2529 */
2530 mpt_read_ioc_pg_1(ioc);
2531
2532 mpt_read_ioc_pg_4(ioc);
2533
2534 break;
2535 }
2536
2537 GetIoUnitPage2(ioc);
2538 mpt_get_manufacturing_pg_0(ioc);
2539 }
2540
2541 out:
2542 if ((ret != 0) && irq_allocated) {
2543 free_irq(ioc->pci_irq, ioc);
2544 if (ioc->msi_enable)
2545 pci_disable_msi(ioc->pcidev);
2546 }
2547 return ret;
2548}
2549
2550/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2551/**
2552 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2553 * @ioc: Pointer to MPT adapter structure
2554 * @pdev: Pointer to (struct pci_dev) structure
2555 *
2556 * Search for PCI bus/dev_function which matches
2557 * PCI bus/dev_function (+/-1) for newly discovered 929,
2558 * 929X, 1030 or 1035.
2559 *
2560 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2561 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2562 */
2563static void
2564mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2565{
2566 struct pci_dev *peer=NULL;
2567 unsigned int slot = PCI_SLOT(pdev->devfn);
2568 unsigned int func = PCI_FUNC(pdev->devfn);
2569 MPT_ADAPTER *ioc_srch;
2570
2571 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2572 " searching for devfn match on %x or %x\n",
2573 ioc->name, pci_name(pdev), pdev->bus->number,
2574 pdev->devfn, func-1, func+1));
2575
2576 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2577 if (!peer) {
2578 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2579 if (!peer)
2580 return;
2581 }
2582
2583 list_for_each_entry(ioc_srch, &ioc_list, list) {
2584 struct pci_dev *_pcidev = ioc_srch->pcidev;
2585 if (_pcidev == peer) {
2586 /* Paranoia checks */
2587 if (ioc->alt_ioc != NULL) {
2588 printk(MYIOC_s_WARN_FMT
2589 "Oops, already bound (%s <==> %s)!\n",
2590 ioc->name, ioc->name, ioc->alt_ioc->name);
2591 break;
2592 } else if (ioc_srch->alt_ioc != NULL) {
2593 printk(MYIOC_s_WARN_FMT
2594 "Oops, already bound (%s <==> %s)!\n",
2595 ioc_srch->name, ioc_srch->name,
2596 ioc_srch->alt_ioc->name);
2597 break;
2598 }
2599 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2600 "FOUND! binding %s <==> %s\n",
2601 ioc->name, ioc->name, ioc_srch->name));
2602 ioc_srch->alt_ioc = ioc;
2603 ioc->alt_ioc = ioc_srch;
2604 }
2605 }
2606 pci_dev_put(peer);
2607}
2608
2609/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2610/**
2611 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2612 * @ioc: Pointer to MPT adapter structure
2613 */
2614static void
2615mpt_adapter_disable(MPT_ADAPTER *ioc)
2616{
2617 int sz;
2618 int ret;
2619
2620 if (ioc->cached_fw != NULL) {
2621 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2622 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2623 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2624 ioc->cached_fw, CAN_SLEEP)) < 0) {
2625 printk(MYIOC_s_WARN_FMT
2626 ": firmware downloadboot failure (%d)!\n",
2627 ioc->name, ret);
2628 }
2629 }
2630
2631 /*
2632 * Put the controller into ready state (if its not already)
2633 */
2634 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2635 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2636 CAN_SLEEP)) {
2637 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2638 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2639 "reset failed to put ioc in ready state!\n",
2640 ioc->name, __func__);
2641 } else
2642 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2643 "failed!\n", ioc->name, __func__);
2644 }
2645
2646
2647 /* Disable adapter interrupts! */
2648 synchronize_irq(ioc->pcidev->irq);
2649 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2650 ioc->active = 0;
2651
2652 /* Clear any lingering interrupt */
2653 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2654 CHIPREG_READ32(&ioc->chip->IntStatus);
2655
2656 if (ioc->alloc != NULL) {
2657 sz = ioc->alloc_sz;
2658 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2659 ioc->name, ioc->alloc, ioc->alloc_sz));
2660 pci_free_consistent(ioc->pcidev, sz,
2661 ioc->alloc, ioc->alloc_dma);
2662 ioc->reply_frames = NULL;
2663 ioc->req_frames = NULL;
2664 ioc->alloc = NULL;
2665 ioc->alloc_total -= sz;
2666 }
2667
2668 if (ioc->sense_buf_pool != NULL) {
2669 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2670 pci_free_consistent(ioc->pcidev, sz,
2671 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2672 ioc->sense_buf_pool = NULL;
2673 ioc->alloc_total -= sz;
2674 }
2675
2676 if (ioc->events != NULL){
2677 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2678 kfree(ioc->events);
2679 ioc->events = NULL;
2680 ioc->alloc_total -= sz;
2681 }
2682
2683 mpt_free_fw_memory(ioc);
2684
2685 kfree(ioc->spi_data.nvram);
2686 mpt_inactive_raid_list_free(ioc);
2687 kfree(ioc->raid_data.pIocPg2);
2688 kfree(ioc->raid_data.pIocPg3);
2689 ioc->spi_data.nvram = NULL;
2690 ioc->raid_data.pIocPg3 = NULL;
2691
2692 if (ioc->spi_data.pIocPg4 != NULL) {
2693 sz = ioc->spi_data.IocPg4Sz;
2694 pci_free_consistent(ioc->pcidev, sz,
2695 ioc->spi_data.pIocPg4,
2696 ioc->spi_data.IocPg4_dma);
2697 ioc->spi_data.pIocPg4 = NULL;
2698 ioc->alloc_total -= sz;
2699 }
2700
2701 if (ioc->ReqToChain != NULL) {
2702 kfree(ioc->ReqToChain);
2703 kfree(ioc->RequestNB);
2704 ioc->ReqToChain = NULL;
2705 }
2706
2707 kfree(ioc->ChainToChain);
2708 ioc->ChainToChain = NULL;
2709
2710 if (ioc->HostPageBuffer != NULL) {
2711 if((ret = mpt_host_page_access_control(ioc,
2712 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2713 printk(MYIOC_s_ERR_FMT
2714 ": %s: host page buffers free failed (%d)!\n",
2715 ioc->name, __func__, ret);
2716 }
2717 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2718 "HostPageBuffer free @ %p, sz=%d bytes\n",
2719 ioc->name, ioc->HostPageBuffer,
2720 ioc->HostPageBuffer_sz));
2721 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2722 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2723 ioc->HostPageBuffer = NULL;
2724 ioc->HostPageBuffer_sz = 0;
2725 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2726 }
2727
2728 pci_set_drvdata(ioc->pcidev, NULL);
2729}
2730/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2731/**
2732 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2733 * @ioc: Pointer to MPT adapter structure
2734 *
2735 * This routine unregisters h/w resources and frees all alloc'd memory
2736 * associated with a MPT adapter structure.
2737 */
2738static void
2739mpt_adapter_dispose(MPT_ADAPTER *ioc)
2740{
2741 int sz_first, sz_last;
2742
2743 if (ioc == NULL)
2744 return;
2745
2746 sz_first = ioc->alloc_total;
2747
2748 mpt_adapter_disable(ioc);
2749
2750 if (ioc->pci_irq != -1) {
2751 free_irq(ioc->pci_irq, ioc);
2752 if (ioc->msi_enable)
2753 pci_disable_msi(ioc->pcidev);
2754 ioc->pci_irq = -1;
2755 }
2756
2757 if (ioc->memmap != NULL) {
2758 iounmap(ioc->memmap);
2759 ioc->memmap = NULL;
2760 }
2761
2762 pci_disable_device(ioc->pcidev);
2763 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2764
2765#if defined(CONFIG_MTRR) && 0
2766 if (ioc->mtrr_reg > 0) {
2767 mtrr_del(ioc->mtrr_reg, 0, 0);
2768 dprintk(ioc, printk(MYIOC_s_INFO_FMT "MTRR region de-registered\n", ioc->name));
2769 }
2770#endif
2771
2772 /* Zap the adapter lookup ptr! */
2773 list_del(&ioc->list);
2774
2775 sz_last = ioc->alloc_total;
2776 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2777 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2778
2779 if (ioc->alt_ioc)
2780 ioc->alt_ioc->alt_ioc = NULL;
2781
2782 kfree(ioc);
2783}
2784
2785/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2786/**
2787 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2788 * @ioc: Pointer to MPT adapter structure
2789 */
2790static void
2791MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2792{
2793 int i = 0;
2794
2795 printk(KERN_INFO "%s: ", ioc->name);
2796 if (ioc->prod_name)
2797 printk("%s: ", ioc->prod_name);
2798 printk("Capabilities={");
2799
2800 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2801 printk("Initiator");
2802 i++;
2803 }
2804
2805 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2806 printk("%sTarget", i ? "," : "");
2807 i++;
2808 }
2809
2810 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2811 printk("%sLAN", i ? "," : "");
2812 i++;
2813 }
2814
2815#if 0
2816 /*
2817 * This would probably evoke more questions than it's worth
2818 */
2819 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2820 printk("%sLogBusAddr", i ? "," : "");
2821 i++;
2822 }
2823#endif
2824
2825 printk("}\n");
2826}
2827
2828/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2829/**
2830 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2831 * @ioc: Pointer to MPT_ADAPTER structure
2832 * @force: Force hard KickStart of IOC
2833 * @sleepFlag: Specifies whether the process can sleep
2834 *
2835 * Returns:
2836 * 1 - DIAG reset and READY
2837 * 0 - READY initially OR soft reset and READY
2838 * -1 - Any failure on KickStart
2839 * -2 - Msg Unit Reset Failed
2840 * -3 - IO Unit Reset Failed
2841 * -4 - IOC owned by a PEER
2842 */
2843static int
2844MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2845{
2846 u32 ioc_state;
2847 int statefault = 0;
2848 int cntdn;
2849 int hard_reset_done = 0;
2850 int r;
2851 int ii;
2852 int whoinit;
2853
2854 /* Get current [raw] IOC state */
2855 ioc_state = mpt_GetIocState(ioc, 0);
2856 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2857
2858 /*
2859 * Check to see if IOC got left/stuck in doorbell handshake
2860 * grip of death. If so, hard reset the IOC.
2861 */
2862 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2863 statefault = 1;
2864 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2865 ioc->name);
2866 }
2867
2868 /* Is it already READY? */
2869 if (!statefault &&
2870 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2871 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2872 "IOC is in READY state\n", ioc->name));
2873 return 0;
2874 }
2875
2876 /*
2877 * Check to see if IOC is in FAULT state.
2878 */
2879 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2880 statefault = 2;
2881 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2882 ioc->name);
2883 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2884 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2885 }
2886
2887 /*
2888 * Hmmm... Did it get left operational?
2889 */
2890 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2891 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2892 ioc->name));
2893
2894 /* Check WhoInit.
2895 * If PCI Peer, exit.
2896 * Else, if no fault conditions are present, issue a MessageUnitReset
2897 * Else, fall through to KickStart case
2898 */
2899 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2900 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2901 "whoinit 0x%x statefault %d force %d\n",
2902 ioc->name, whoinit, statefault, force));
2903 if (whoinit == MPI_WHOINIT_PCI_PEER)
2904 return -4;
2905 else {
2906 if ((statefault == 0 ) && (force == 0)) {
2907 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2908 return 0;
2909 }
2910 statefault = 3;
2911 }
2912 }
2913
2914 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2915 if (hard_reset_done < 0)
2916 return -1;
2917
2918 /*
2919 * Loop here waiting for IOC to come READY.
2920 */
2921 ii = 0;
2922 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2923
2924 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2925 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2926 /*
2927 * BIOS or previous driver load left IOC in OP state.
2928 * Reset messaging FIFOs.
2929 */
2930 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
2931 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
2932 return -2;
2933 }
2934 } else if (ioc_state == MPI_IOC_STATE_RESET) {
2935 /*
2936 * Something is wrong. Try to get IOC back
2937 * to a known state.
2938 */
2939 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
2940 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
2941 return -3;
2942 }
2943 }
2944
2945 ii++; cntdn--;
2946 if (!cntdn) {
2947 printk(MYIOC_s_ERR_FMT
2948 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
2949 ioc->name, ioc_state, (int)((ii+5)/HZ));
2950 return -ETIME;
2951 }
2952
2953 if (sleepFlag == CAN_SLEEP) {
2954 msleep(1);
2955 } else {
2956 mdelay (1); /* 1 msec delay */
2957 }
2958
2959 }
2960
2961 if (statefault < 3) {
2962 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
2963 statefault == 1 ? "stuck handshake" : "IOC FAULT");
2964 }
2965
2966 return hard_reset_done;
2967}
2968
2969/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2970/**
2971 * mpt_GetIocState - Get the current state of a MPT adapter.
2972 * @ioc: Pointer to MPT_ADAPTER structure
2973 * @cooked: Request raw or cooked IOC state
2974 *
2975 * Returns all IOC Doorbell register bits if cooked==0, else just the
2976 * Doorbell bits in MPI_IOC_STATE_MASK.
2977 */
2978u32
2979mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
2980{
2981 u32 s, sc;
2982
2983 /* Get! */
2984 s = CHIPREG_READ32(&ioc->chip->Doorbell);
2985 sc = s & MPI_IOC_STATE_MASK;
2986
2987 /* Save! */
2988 ioc->last_state = sc;
2989
2990 return cooked ? sc : s;
2991}
2992
2993/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2994/**
2995 * GetIocFacts - Send IOCFacts request to MPT adapter.
2996 * @ioc: Pointer to MPT_ADAPTER structure
2997 * @sleepFlag: Specifies whether the process can sleep
2998 * @reason: If recovery, only update facts.
2999 *
3000 * Returns 0 for success, non-zero for failure.
3001 */
3002static int
3003GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3004{
3005 IOCFacts_t get_facts;
3006 IOCFactsReply_t *facts;
3007 int r;
3008 int req_sz;
3009 int reply_sz;
3010 int sz;
3011 u32 status, vv;
3012 u8 shiftFactor=1;
3013
3014 /* IOC *must* NOT be in RESET state! */
3015 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3016 printk(KERN_ERR MYNAM
3017 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3018 ioc->name, ioc->last_state);
3019 return -44;
3020 }
3021
3022 facts = &ioc->facts;
3023
3024 /* Destination (reply area)... */
3025 reply_sz = sizeof(*facts);
3026 memset(facts, 0, reply_sz);
3027
3028 /* Request area (get_facts on the stack right now!) */
3029 req_sz = sizeof(get_facts);
3030 memset(&get_facts, 0, req_sz);
3031
3032 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3033 /* Assert: All other get_facts fields are zero! */
3034
3035 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3036 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3037 ioc->name, req_sz, reply_sz));
3038
3039 /* No non-zero fields in the get_facts request are greater than
3040 * 1 byte in size, so we can just fire it off as is.
3041 */
3042 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3043 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3044 if (r != 0)
3045 return r;
3046
3047 /*
3048 * Now byte swap (GRRR) the necessary fields before any further
3049 * inspection of reply contents.
3050 *
3051 * But need to do some sanity checks on MsgLength (byte) field
3052 * to make sure we don't zero IOC's req_sz!
3053 */
3054 /* Did we get a valid reply? */
3055 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3056 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3057 /*
3058 * If not been here, done that, save off first WhoInit value
3059 */
3060 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3061 ioc->FirstWhoInit = facts->WhoInit;
3062 }
3063
3064 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3065 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3066 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3067 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3068 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3069 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3070 /* CHECKME! IOCStatus, IOCLogInfo */
3071
3072 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3073 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3074
3075 /*
3076 * FC f/w version changed between 1.1 and 1.2
3077 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3078 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3079 */
3080 if (facts->MsgVersion < MPI_VERSION_01_02) {
3081 /*
3082 * Handle old FC f/w style, convert to new...
3083 */
3084 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3085 facts->FWVersion.Word =
3086 ((oldv<<12) & 0xFF000000) |
3087 ((oldv<<8) & 0x000FFF00);
3088 } else
3089 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3090
3091 facts->ProductID = le16_to_cpu(facts->ProductID);
3092
3093 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3094 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3095 ioc->ir_firmware = 1;
3096
3097 facts->CurrentHostMfaHighAddr =
3098 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3099 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3100 facts->CurrentSenseBufferHighAddr =
3101 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3102 facts->CurReplyFrameSize =
3103 le16_to_cpu(facts->CurReplyFrameSize);
3104 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3105
3106 /*
3107 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3108 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3109 * to 14 in MPI-1.01.0x.
3110 */
3111 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3112 facts->MsgVersion > MPI_VERSION_01_00) {
3113 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3114 }
3115
3116 sz = facts->FWImageSize;
3117 if ( sz & 0x01 )
3118 sz += 1;
3119 if ( sz & 0x02 )
3120 sz += 2;
3121 facts->FWImageSize = sz;
3122
3123 if (!facts->RequestFrameSize) {
3124 /* Something is wrong! */
3125 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3126 ioc->name);
3127 return -55;
3128 }
3129
3130 r = sz = facts->BlockSize;
3131 vv = ((63 / (sz * 4)) + 1) & 0x03;
3132 ioc->NB_for_64_byte_frame = vv;
3133 while ( sz )
3134 {
3135 shiftFactor++;
3136 sz = sz >> 1;
3137 }
3138 ioc->NBShiftFactor = shiftFactor;
3139 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3140 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3141 ioc->name, vv, shiftFactor, r));
3142
3143 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3144 /*
3145 * Set values for this IOC's request & reply frame sizes,
3146 * and request & reply queue depths...
3147 */
3148 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3149 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3150 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3151 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3152
3153 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3154 ioc->name, ioc->reply_sz, ioc->reply_depth));
3155 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3156 ioc->name, ioc->req_sz, ioc->req_depth));
3157
3158 /* Get port facts! */
3159 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3160 return r;
3161 }
3162 } else {
3163 printk(MYIOC_s_ERR_FMT
3164 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3165 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3166 RequestFrameSize)/sizeof(u32)));
3167 return -66;
3168 }
3169
3170 return 0;
3171}
3172
3173/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3174/**
3175 * GetPortFacts - Send PortFacts request to MPT adapter.
3176 * @ioc: Pointer to MPT_ADAPTER structure
3177 * @portnum: Port number
3178 * @sleepFlag: Specifies whether the process can sleep
3179 *
3180 * Returns 0 for success, non-zero for failure.
3181 */
3182static int
3183GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3184{
3185 PortFacts_t get_pfacts;
3186 PortFactsReply_t *pfacts;
3187 int ii;
3188 int req_sz;
3189 int reply_sz;
3190 int max_id;
3191
3192 /* IOC *must* NOT be in RESET state! */
3193 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3194 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3195 ioc->name, ioc->last_state );
3196 return -4;
3197 }
3198
3199 pfacts = &ioc->pfacts[portnum];
3200
3201 /* Destination (reply area)... */
3202 reply_sz = sizeof(*pfacts);
3203 memset(pfacts, 0, reply_sz);
3204
3205 /* Request area (get_pfacts on the stack right now!) */
3206 req_sz = sizeof(get_pfacts);
3207 memset(&get_pfacts, 0, req_sz);
3208
3209 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3210 get_pfacts.PortNumber = portnum;
3211 /* Assert: All other get_pfacts fields are zero! */
3212
3213 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3214 ioc->name, portnum));
3215
3216 /* No non-zero fields in the get_pfacts request are greater than
3217 * 1 byte in size, so we can just fire it off as is.
3218 */
3219 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3220 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3221 if (ii != 0)
3222 return ii;
3223
3224 /* Did we get a valid reply? */
3225
3226 /* Now byte swap the necessary fields in the response. */
3227 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3228 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3229 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3230 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3231 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3232 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3233 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3234 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3235 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3236
3237 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3238 pfacts->MaxDevices;
3239 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3240 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3241
3242 /*
3243 * Place all the devices on channels
3244 *
3245 * (for debuging)
3246 */
3247 if (mpt_channel_mapping) {
3248 ioc->devices_per_bus = 1;
3249 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3250 }
3251
3252 return 0;
3253}
3254
3255/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3256/**
3257 * SendIocInit - Send IOCInit request to MPT adapter.
3258 * @ioc: Pointer to MPT_ADAPTER structure
3259 * @sleepFlag: Specifies whether the process can sleep
3260 *
3261 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3262 *
3263 * Returns 0 for success, non-zero for failure.
3264 */
3265static int
3266SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3267{
3268 IOCInit_t ioc_init;
3269 MPIDefaultReply_t init_reply;
3270 u32 state;
3271 int r;
3272 int count;
3273 int cntdn;
3274
3275 memset(&ioc_init, 0, sizeof(ioc_init));
3276 memset(&init_reply, 0, sizeof(init_reply));
3277
3278 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3279 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3280
3281 /* If we are in a recovery mode and we uploaded the FW image,
3282 * then this pointer is not NULL. Skip the upload a second time.
3283 * Set this flag if cached_fw set for either IOC.
3284 */
3285 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3286 ioc->upload_fw = 1;
3287 else
3288 ioc->upload_fw = 0;
3289 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3290 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3291
3292 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3293 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3294
3295 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3296 ioc->name, ioc->facts.MsgVersion));
3297 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3298 // set MsgVersion and HeaderVersion host driver was built with
3299 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3300 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3301
3302 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3303 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3304 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3305 return -99;
3306 }
3307 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3308
3309 if (ioc->sg_addr_size == sizeof(u64)) {
3310 /* Save the upper 32-bits of the request
3311 * (reply) and sense buffers.
3312 */
3313 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3314 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3315 } else {
3316 /* Force 32-bit addressing */
3317 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3318 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3319 }
3320
3321 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3322 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3323 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3324 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3325
3326 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3327 ioc->name, &ioc_init));
3328
3329 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3330 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3331 if (r != 0) {
3332 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3333 return r;
3334 }
3335
3336 /* No need to byte swap the multibyte fields in the reply
3337 * since we don't even look at its contents.
3338 */
3339
3340 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3341 ioc->name, &ioc_init));
3342
3343 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3344 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3345 return r;
3346 }
3347
3348 /* YIKES! SUPER IMPORTANT!!!
3349 * Poll IocState until _OPERATIONAL while IOC is doing
3350 * LoopInit and TargetDiscovery!
3351 */
3352 count = 0;
3353 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3354 state = mpt_GetIocState(ioc, 1);
3355 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3356 if (sleepFlag == CAN_SLEEP) {
3357 msleep(1);
3358 } else {
3359 mdelay(1);
3360 }
3361
3362 if (!cntdn) {
3363 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3364 ioc->name, (int)((count+5)/HZ));
3365 return -9;
3366 }
3367
3368 state = mpt_GetIocState(ioc, 1);
3369 count++;
3370 }
3371 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3372 ioc->name, count));
3373
3374 ioc->aen_event_read_flag=0;
3375 return r;
3376}
3377
3378/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3379/**
3380 * SendPortEnable - Send PortEnable request to MPT adapter port.
3381 * @ioc: Pointer to MPT_ADAPTER structure
3382 * @portnum: Port number to enable
3383 * @sleepFlag: Specifies whether the process can sleep
3384 *
3385 * Send PortEnable to bring IOC to OPERATIONAL state.
3386 *
3387 * Returns 0 for success, non-zero for failure.
3388 */
3389static int
3390SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3391{
3392 PortEnable_t port_enable;
3393 MPIDefaultReply_t reply_buf;
3394 int rc;
3395 int req_sz;
3396 int reply_sz;
3397
3398 /* Destination... */
3399 reply_sz = sizeof(MPIDefaultReply_t);
3400 memset(&reply_buf, 0, reply_sz);
3401
3402 req_sz = sizeof(PortEnable_t);
3403 memset(&port_enable, 0, req_sz);
3404
3405 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3406 port_enable.PortNumber = portnum;
3407/* port_enable.ChainOffset = 0; */
3408/* port_enable.MsgFlags = 0; */
3409/* port_enable.MsgContext = 0; */
3410
3411 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3412 ioc->name, portnum, &port_enable));
3413
3414 /* RAID FW may take a long time to enable
3415 */
3416 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3417 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3418 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3419 300 /*seconds*/, sleepFlag);
3420 } else {
3421 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3422 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3423 30 /*seconds*/, sleepFlag);
3424 }
3425 return rc;
3426}
3427
3428/**
3429 * mpt_alloc_fw_memory - allocate firmware memory
3430 * @ioc: Pointer to MPT_ADAPTER structure
3431 * @size: total FW bytes
3432 *
3433 * If memory has already been allocated, the same (cached) value
3434 * is returned.
3435 *
3436 * Return 0 if successful, or non-zero for failure
3437 **/
3438int
3439mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3440{
3441 int rc;
3442
3443 if (ioc->cached_fw) {
3444 rc = 0; /* use already allocated memory */
3445 goto out;
3446 }
3447 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3448 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3449 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3450 rc = 0;
3451 goto out;
3452 }
3453 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3454 if (!ioc->cached_fw) {
3455 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3456 ioc->name);
3457 rc = -1;
3458 } else {
3459 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3460 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3461 ioc->alloc_total += size;
3462 rc = 0;
3463 }
3464 out:
3465 return rc;
3466}
3467
3468/**
3469 * mpt_free_fw_memory - free firmware memory
3470 * @ioc: Pointer to MPT_ADAPTER structure
3471 *
3472 * If alt_img is NULL, delete from ioc structure.
3473 * Else, delete a secondary image in same format.
3474 **/
3475void
3476mpt_free_fw_memory(MPT_ADAPTER *ioc)
3477{
3478 int sz;
3479
3480 if (!ioc->cached_fw)
3481 return;
3482
3483 sz = ioc->facts.FWImageSize;
3484 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3485 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3486 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3487 ioc->alloc_total -= sz;
3488 ioc->cached_fw = NULL;
3489}
3490
3491/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3492/**
3493 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3494 * @ioc: Pointer to MPT_ADAPTER structure
3495 * @sleepFlag: Specifies whether the process can sleep
3496 *
3497 * Returns 0 for success, >0 for handshake failure
3498 * <0 for fw upload failure.
3499 *
3500 * Remark: If bound IOC and a successful FWUpload was performed
3501 * on the bound IOC, the second image is discarded
3502 * and memory is free'd. Both channels must upload to prevent
3503 * IOC from running in degraded mode.
3504 */
3505static int
3506mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3507{
3508 u8 reply[sizeof(FWUploadReply_t)];
3509 FWUpload_t *prequest;
3510 FWUploadReply_t *preply;
3511 FWUploadTCSGE_t *ptcsge;
3512 u32 flagsLength;
3513 int ii, sz, reply_sz;
3514 int cmdStatus;
3515 int request_size;
3516 /* If the image size is 0, we are done.
3517 */
3518 if ((sz = ioc->facts.FWImageSize) == 0)
3519 return 0;
3520
3521 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3522 return -ENOMEM;
3523
3524 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3525 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3526
3527 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3528 kzalloc(ioc->req_sz, GFP_KERNEL);
3529 if (!prequest) {
3530 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3531 "while allocating memory \n", ioc->name));
3532 mpt_free_fw_memory(ioc);
3533 return -ENOMEM;
3534 }
3535
3536 preply = (FWUploadReply_t *)&reply;
3537
3538 reply_sz = sizeof(reply);
3539 memset(preply, 0, reply_sz);
3540
3541 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3542 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3543
3544 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3545 ptcsge->DetailsLength = 12;
3546 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3547 ptcsge->ImageSize = cpu_to_le32(sz);
3548 ptcsge++;
3549
3550 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3551 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3552 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3553 ioc->SGE_size;
3554 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3555 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3556 ioc->facts.FWImageSize, request_size));
3557 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3558
3559 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3560 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3561
3562 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3563 "rc=%x \n", ioc->name, ii));
3564
3565 cmdStatus = -EFAULT;
3566 if (ii == 0) {
3567 /* Handshake transfer was complete and successful.
3568 * Check the Reply Frame.
3569 */
3570 int status;
3571 status = le16_to_cpu(preply->IOCStatus) &
3572 MPI_IOCSTATUS_MASK;
3573 if (status == MPI_IOCSTATUS_SUCCESS &&
3574 ioc->facts.FWImageSize ==
3575 le32_to_cpu(preply->ActualImageSize))
3576 cmdStatus = 0;
3577 }
3578 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3579 ioc->name, cmdStatus));
3580
3581
3582 if (cmdStatus) {
3583 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3584 "freeing image \n", ioc->name));
3585 mpt_free_fw_memory(ioc);
3586 }
3587 kfree(prequest);
3588
3589 return cmdStatus;
3590}
3591
3592/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3593/**
3594 * mpt_downloadboot - DownloadBoot code
3595 * @ioc: Pointer to MPT_ADAPTER structure
3596 * @pFwHeader: Pointer to firmware header info
3597 * @sleepFlag: Specifies whether the process can sleep
3598 *
3599 * FwDownloadBoot requires Programmed IO access.
3600 *
3601 * Returns 0 for success
3602 * -1 FW Image size is 0
3603 * -2 No valid cached_fw Pointer
3604 * <0 for fw upload failure.
3605 */
3606static int
3607mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3608{
3609 MpiExtImageHeader_t *pExtImage;
3610 u32 fwSize;
3611 u32 diag0val;
3612 int count;
3613 u32 *ptrFw;
3614 u32 diagRwData;
3615 u32 nextImage;
3616 u32 load_addr;
3617 u32 ioc_state=0;
3618
3619 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3620 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3621
3622 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3623 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3624 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3625 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3626 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3627 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3628
3629 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3630
3631 /* wait 1 msec */
3632 if (sleepFlag == CAN_SLEEP) {
3633 msleep(1);
3634 } else {
3635 mdelay (1);
3636 }
3637
3638 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3639 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3640
3641 for (count = 0; count < 30; count ++) {
3642 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3643 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3644 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3645 ioc->name, count));
3646 break;
3647 }
3648 /* wait .1 sec */
3649 if (sleepFlag == CAN_SLEEP) {
3650 msleep (100);
3651 } else {
3652 mdelay (100);
3653 }
3654 }
3655
3656 if ( count == 30 ) {
3657 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3658 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3659 ioc->name, diag0val));
3660 return -3;
3661 }
3662
3663 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3664 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3665 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3666 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3667 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3668 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3669
3670 /* Set the DiagRwEn and Disable ARM bits */
3671 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3672
3673 fwSize = (pFwHeader->ImageSize + 3)/4;
3674 ptrFw = (u32 *) pFwHeader;
3675
3676 /* Write the LoadStartAddress to the DiagRw Address Register
3677 * using Programmed IO
3678 */
3679 if (ioc->errata_flag_1064)
3680 pci_enable_io_access(ioc->pcidev);
3681
3682 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3683 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3684 ioc->name, pFwHeader->LoadStartAddress));
3685
3686 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3687 ioc->name, fwSize*4, ptrFw));
3688 while (fwSize--) {
3689 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3690 }
3691
3692 nextImage = pFwHeader->NextImageHeaderOffset;
3693 while (nextImage) {
3694 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3695
3696 load_addr = pExtImage->LoadStartAddress;
3697
3698 fwSize = (pExtImage->ImageSize + 3) >> 2;
3699 ptrFw = (u32 *)pExtImage;
3700
3701 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3702 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3703 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3704
3705 while (fwSize--) {
3706 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3707 }
3708 nextImage = pExtImage->NextImageHeaderOffset;
3709 }
3710
3711 /* Write the IopResetVectorRegAddr */
3712 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3713 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3714
3715 /* Write the IopResetVectorValue */
3716 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3717 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3718
3719 /* Clear the internal flash bad bit - autoincrementing register,
3720 * so must do two writes.
3721 */
3722 if (ioc->bus_type == SPI) {
3723 /*
3724 * 1030 and 1035 H/W errata, workaround to access
3725 * the ClearFlashBadSignatureBit
3726 */
3727 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3728 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3729 diagRwData |= 0x40000000;
3730 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3731 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3732
3733 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3734 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3735 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3736 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3737
3738 /* wait 1 msec */
3739 if (sleepFlag == CAN_SLEEP) {
3740 msleep (1);
3741 } else {
3742 mdelay (1);
3743 }
3744 }
3745
3746 if (ioc->errata_flag_1064)
3747 pci_disable_io_access(ioc->pcidev);
3748
3749 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3750 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3751 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3752 ioc->name, diag0val));
3753 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3754 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3755 ioc->name, diag0val));
3756 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3757
3758 /* Write 0xFF to reset the sequencer */
3759 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3760
3761 if (ioc->bus_type == SAS) {
3762 ioc_state = mpt_GetIocState(ioc, 0);
3763 if ( (GetIocFacts(ioc, sleepFlag,
3764 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3765 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3766 ioc->name, ioc_state));
3767 return -EFAULT;
3768 }
3769 }
3770
3771 for (count=0; count<HZ*20; count++) {
3772 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3773 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3774 "downloadboot successful! (count=%d) IocState=%x\n",
3775 ioc->name, count, ioc_state));
3776 if (ioc->bus_type == SAS) {
3777 return 0;
3778 }
3779 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3780 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3781 "downloadboot: SendIocInit failed\n",
3782 ioc->name));
3783 return -EFAULT;
3784 }
3785 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3786 "downloadboot: SendIocInit successful\n",
3787 ioc->name));
3788 return 0;
3789 }
3790 if (sleepFlag == CAN_SLEEP) {
3791 msleep (10);
3792 } else {
3793 mdelay (10);
3794 }
3795 }
3796 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3797 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3798 return -EFAULT;
3799}
3800
3801/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3802/**
3803 * KickStart - Perform hard reset of MPT adapter.
3804 * @ioc: Pointer to MPT_ADAPTER structure
3805 * @force: Force hard reset
3806 * @sleepFlag: Specifies whether the process can sleep
3807 *
3808 * This routine places MPT adapter in diagnostic mode via the
3809 * WriteSequence register, and then performs a hard reset of adapter
3810 * via the Diagnostic register.
3811 *
3812 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3813 * or NO_SLEEP (interrupt thread, use mdelay)
3814 * force - 1 if doorbell active, board fault state
3815 * board operational, IOC_RECOVERY or
3816 * IOC_BRINGUP and there is an alt_ioc.
3817 * 0 else
3818 *
3819 * Returns:
3820 * 1 - hard reset, READY
3821 * 0 - no reset due to History bit, READY
3822 * -1 - no reset due to History bit but not READY
3823 * OR reset but failed to come READY
3824 * -2 - no reset, could not enter DIAG mode
3825 * -3 - reset but bad FW bit
3826 */
3827static int
3828KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3829{
3830 int hard_reset_done = 0;
3831 u32 ioc_state=0;
3832 int cnt,cntdn;
3833
3834 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3835 if (ioc->bus_type == SPI) {
3836 /* Always issue a Msg Unit Reset first. This will clear some
3837 * SCSI bus hang conditions.
3838 */
3839 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3840
3841 if (sleepFlag == CAN_SLEEP) {
3842 msleep (1000);
3843 } else {
3844 mdelay (1000);
3845 }
3846 }
3847
3848 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3849 if (hard_reset_done < 0)
3850 return hard_reset_done;
3851
3852 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3853 ioc->name));
3854
3855 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3856 for (cnt=0; cnt<cntdn; cnt++) {
3857 ioc_state = mpt_GetIocState(ioc, 1);
3858 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3859 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3860 ioc->name, cnt));
3861 return hard_reset_done;
3862 }
3863 if (sleepFlag == CAN_SLEEP) {
3864 msleep (10);
3865 } else {
3866 mdelay (10);
3867 }
3868 }
3869
3870 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3871 ioc->name, mpt_GetIocState(ioc, 0)));
3872 return -1;
3873}
3874
3875/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3876/**
3877 * mpt_diag_reset - Perform hard reset of the adapter.
3878 * @ioc: Pointer to MPT_ADAPTER structure
3879 * @ignore: Set if to honor and clear to ignore
3880 * the reset history bit
3881 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3882 * else set to NO_SLEEP (use mdelay instead)
3883 *
3884 * This routine places the adapter in diagnostic mode via the
3885 * WriteSequence register and then performs a hard reset of adapter
3886 * via the Diagnostic register. Adapter should be in ready state
3887 * upon successful completion.
3888 *
3889 * Returns: 1 hard reset successful
3890 * 0 no reset performed because reset history bit set
3891 * -2 enabling diagnostic mode failed
3892 * -3 diagnostic reset failed
3893 */
3894static int
3895mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3896{
3897 u32 diag0val;
3898 u32 doorbell;
3899 int hard_reset_done = 0;
3900 int count = 0;
3901 u32 diag1val = 0;
3902 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3903 u8 cb_idx;
3904
3905 /* Clear any existing interrupts */
3906 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3907
3908 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3909
3910 if (!ignore)
3911 return 0;
3912
3913 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3914 "address=%p\n", ioc->name, __func__,
3915 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3916 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3917 if (sleepFlag == CAN_SLEEP)
3918 msleep(1);
3919 else
3920 mdelay(1);
3921
3922 /*
3923 * Call each currently registered protocol IOC reset handler
3924 * with pre-reset indication.
3925 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3926 * MptResetHandlers[] registered yet.
3927 */
3928 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3929 if (MptResetHandlers[cb_idx])
3930 (*(MptResetHandlers[cb_idx]))(ioc,
3931 MPT_IOC_PRE_RESET);
3932 }
3933
3934 for (count = 0; count < 60; count ++) {
3935 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
3936 doorbell &= MPI_IOC_STATE_MASK;
3937
3938 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3939 "looking for READY STATE: doorbell=%x"
3940 " count=%d\n",
3941 ioc->name, doorbell, count));
3942
3943 if (doorbell == MPI_IOC_STATE_READY) {
3944 return 1;
3945 }
3946
3947 /* wait 1 sec */
3948 if (sleepFlag == CAN_SLEEP)
3949 msleep(1000);
3950 else
3951 mdelay(1000);
3952 }
3953 return -1;
3954 }
3955
3956 /* Use "Diagnostic reset" method! (only thing available!) */
3957 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3958
3959 if (ioc->debug_level & MPT_DEBUG) {
3960 if (ioc->alt_ioc)
3961 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
3962 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
3963 ioc->name, diag0val, diag1val));
3964 }
3965
3966 /* Do the reset if we are told to ignore the reset history
3967 * or if the reset history is 0
3968 */
3969 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
3970 while ((diag0val & MPI_DIAG_DRWE) == 0) {
3971 /* Write magic sequence to WriteSequence register
3972 * Loop until in diagnostic mode
3973 */
3974 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3975 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3976 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3977 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3978 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3979 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3980
3981 /* wait 100 msec */
3982 if (sleepFlag == CAN_SLEEP) {
3983 msleep (100);
3984 } else {
3985 mdelay (100);
3986 }
3987
3988 count++;
3989 if (count > 20) {
3990 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
3991 ioc->name, diag0val);
3992 return -2;
3993
3994 }
3995
3996 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3997
3998 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
3999 ioc->name, diag0val));
4000 }
4001
4002 if (ioc->debug_level & MPT_DEBUG) {
4003 if (ioc->alt_ioc)
4004 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4005 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4006 ioc->name, diag0val, diag1val));
4007 }
4008 /*
4009 * Disable the ARM (Bug fix)
4010 *
4011 */
4012 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4013 mdelay(1);
4014
4015 /*
4016 * Now hit the reset bit in the Diagnostic register
4017 * (THE BIG HAMMER!) (Clears DRWE bit).
4018 */
4019 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4020 hard_reset_done = 1;
4021 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4022 ioc->name));
4023
4024 /*
4025 * Call each currently registered protocol IOC reset handler
4026 * with pre-reset indication.
4027 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4028 * MptResetHandlers[] registered yet.
4029 */
4030 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4031 if (MptResetHandlers[cb_idx]) {
4032 mpt_signal_reset(cb_idx,
4033 ioc, MPT_IOC_PRE_RESET);
4034 if (ioc->alt_ioc) {
4035 mpt_signal_reset(cb_idx,
4036 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4037 }
4038 }
4039 }
4040
4041 if (ioc->cached_fw)
4042 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4043 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4044 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4045 else
4046 cached_fw = NULL;
4047 if (cached_fw) {
4048 /* If the DownloadBoot operation fails, the
4049 * IOC will be left unusable. This is a fatal error
4050 * case. _diag_reset will return < 0
4051 */
4052 for (count = 0; count < 30; count ++) {
4053 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4054 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4055 break;
4056 }
4057
4058 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4059 ioc->name, diag0val, count));
4060 /* wait 1 sec */
4061 if (sleepFlag == CAN_SLEEP) {
4062 msleep (1000);
4063 } else {
4064 mdelay (1000);
4065 }
4066 }
4067 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4068 printk(MYIOC_s_WARN_FMT
4069 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4070 }
4071
4072 } else {
4073 /* Wait for FW to reload and for board
4074 * to go to the READY state.
4075 * Maximum wait is 60 seconds.
4076 * If fail, no error will check again
4077 * with calling program.
4078 */
4079 for (count = 0; count < 60; count ++) {
4080 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4081 doorbell &= MPI_IOC_STATE_MASK;
4082
4083 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4084 "looking for READY STATE: doorbell=%x"
4085 " count=%d\n", ioc->name, doorbell, count));
4086
4087 if (doorbell == MPI_IOC_STATE_READY) {
4088 break;
4089 }
4090
4091 /* wait 1 sec */
4092 if (sleepFlag == CAN_SLEEP) {
4093 msleep (1000);
4094 } else {
4095 mdelay (1000);
4096 }
4097 }
4098
4099 if (doorbell != MPI_IOC_STATE_READY)
4100 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4101 "after reset! IocState=%x", ioc->name,
4102 doorbell);
4103 }
4104 }
4105
4106 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4107 if (ioc->debug_level & MPT_DEBUG) {
4108 if (ioc->alt_ioc)
4109 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4110 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4111 ioc->name, diag0val, diag1val));
4112 }
4113
4114 /* Clear RESET_HISTORY bit! Place board in the
4115 * diagnostic mode to update the diag register.
4116 */
4117 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4118 count = 0;
4119 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4120 /* Write magic sequence to WriteSequence register
4121 * Loop until in diagnostic mode
4122 */
4123 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4124 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4125 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4126 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4127 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4128 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4129
4130 /* wait 100 msec */
4131 if (sleepFlag == CAN_SLEEP) {
4132 msleep (100);
4133 } else {
4134 mdelay (100);
4135 }
4136
4137 count++;
4138 if (count > 20) {
4139 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4140 ioc->name, diag0val);
4141 break;
4142 }
4143 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4144 }
4145 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4146 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4147 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4148 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4149 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4150 ioc->name);
4151 }
4152
4153 /* Disable Diagnostic Mode
4154 */
4155 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4156
4157 /* Check FW reload status flags.
4158 */
4159 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4160 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4161 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4162 ioc->name, diag0val);
4163 return -3;
4164 }
4165
4166 if (ioc->debug_level & MPT_DEBUG) {
4167 if (ioc->alt_ioc)
4168 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4169 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4170 ioc->name, diag0val, diag1val));
4171 }
4172
4173 /*
4174 * Reset flag that says we've enabled event notification
4175 */
4176 ioc->facts.EventState = 0;
4177
4178 if (ioc->alt_ioc)
4179 ioc->alt_ioc->facts.EventState = 0;
4180
4181 return hard_reset_done;
4182}
4183
4184/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4185/**
4186 * SendIocReset - Send IOCReset request to MPT adapter.
4187 * @ioc: Pointer to MPT_ADAPTER structure
4188 * @reset_type: reset type, expected values are
4189 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4190 * @sleepFlag: Specifies whether the process can sleep
4191 *
4192 * Send IOCReset request to the MPT adapter.
4193 *
4194 * Returns 0 for success, non-zero for failure.
4195 */
4196static int
4197SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4198{
4199 int r;
4200 u32 state;
4201 int cntdn, count;
4202
4203 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4204 ioc->name, reset_type));
4205 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4206 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4207 return r;
4208
4209 /* FW ACK'd request, wait for READY state
4210 */
4211 count = 0;
4212 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4213
4214 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4215 cntdn--;
4216 count++;
4217 if (!cntdn) {
4218 if (sleepFlag != CAN_SLEEP)
4219 count *= 10;
4220
4221 printk(MYIOC_s_ERR_FMT
4222 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4223 ioc->name, state, (int)((count+5)/HZ));
4224 return -ETIME;
4225 }
4226
4227 if (sleepFlag == CAN_SLEEP) {
4228 msleep(1);
4229 } else {
4230 mdelay (1); /* 1 msec delay */
4231 }
4232 }
4233
4234 /* TODO!
4235 * Cleanup all event stuff for this IOC; re-issue EventNotification
4236 * request if needed.
4237 */
4238 if (ioc->facts.Function)
4239 ioc->facts.EventState = 0;
4240
4241 return 0;
4242}
4243
4244/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4245/**
4246 * initChainBuffers - Allocate memory for and initialize chain buffers
4247 * @ioc: Pointer to MPT_ADAPTER structure
4248 *
4249 * Allocates memory for and initializes chain buffers,
4250 * chain buffer control arrays and spinlock.
4251 */
4252static int
4253initChainBuffers(MPT_ADAPTER *ioc)
4254{
4255 u8 *mem;
4256 int sz, ii, num_chain;
4257 int scale, num_sge, numSGE;
4258
4259 /* ReqToChain size must equal the req_depth
4260 * index = req_idx
4261 */
4262 if (ioc->ReqToChain == NULL) {
4263 sz = ioc->req_depth * sizeof(int);
4264 mem = kmalloc(sz, GFP_ATOMIC);
4265 if (mem == NULL)
4266 return -1;
4267
4268 ioc->ReqToChain = (int *) mem;
4269 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4270 ioc->name, mem, sz));
4271 mem = kmalloc(sz, GFP_ATOMIC);
4272 if (mem == NULL)
4273 return -1;
4274
4275 ioc->RequestNB = (int *) mem;
4276 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4277 ioc->name, mem, sz));
4278 }
4279 for (ii = 0; ii < ioc->req_depth; ii++) {
4280 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4281 }
4282
4283 /* ChainToChain size must equal the total number
4284 * of chain buffers to be allocated.
4285 * index = chain_idx
4286 *
4287 * Calculate the number of chain buffers needed(plus 1) per I/O
4288 * then multiply the maximum number of simultaneous cmds
4289 *
4290 * num_sge = num sge in request frame + last chain buffer
4291 * scale = num sge per chain buffer if no chain element
4292 */
4293 scale = ioc->req_sz / ioc->SGE_size;
4294 if (ioc->sg_addr_size == sizeof(u64))
4295 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4296 else
4297 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4298
4299 if (ioc->sg_addr_size == sizeof(u64)) {
4300 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4301 (ioc->req_sz - 60) / ioc->SGE_size;
4302 } else {
4303 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4304 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4305 }
4306 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4307 ioc->name, num_sge, numSGE));
4308
4309 if (ioc->bus_type == FC) {
4310 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4311 numSGE = MPT_SCSI_FC_SG_DEPTH;
4312 } else {
4313 if (numSGE > MPT_SCSI_SG_DEPTH)
4314 numSGE = MPT_SCSI_SG_DEPTH;
4315 }
4316
4317 num_chain = 1;
4318 while (numSGE - num_sge > 0) {
4319 num_chain++;
4320 num_sge += (scale - 1);
4321 }
4322 num_chain++;
4323
4324 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4325 ioc->name, numSGE, num_sge, num_chain));
4326
4327 if (ioc->bus_type == SPI)
4328 num_chain *= MPT_SCSI_CAN_QUEUE;
4329 else if (ioc->bus_type == SAS)
4330 num_chain *= MPT_SAS_CAN_QUEUE;
4331 else
4332 num_chain *= MPT_FC_CAN_QUEUE;
4333
4334 ioc->num_chain = num_chain;
4335
4336 sz = num_chain * sizeof(int);
4337 if (ioc->ChainToChain == NULL) {
4338 mem = kmalloc(sz, GFP_ATOMIC);
4339 if (mem == NULL)
4340 return -1;
4341
4342 ioc->ChainToChain = (int *) mem;
4343 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4344 ioc->name, mem, sz));
4345 } else {
4346 mem = (u8 *) ioc->ChainToChain;
4347 }
4348 memset(mem, 0xFF, sz);
4349 return num_chain;
4350}
4351
4352/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4353/**
4354 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4355 * @ioc: Pointer to MPT_ADAPTER structure
4356 *
4357 * This routine allocates memory for the MPT reply and request frame
4358 * pools (if necessary), and primes the IOC reply FIFO with
4359 * reply frames.
4360 *
4361 * Returns 0 for success, non-zero for failure.
4362 */
4363static int
4364PrimeIocFifos(MPT_ADAPTER *ioc)
4365{
4366 MPT_FRAME_HDR *mf;
4367 unsigned long flags;
4368 dma_addr_t alloc_dma;
4369 u8 *mem;
4370 int i, reply_sz, sz, total_size, num_chain;
4371 u64 dma_mask;
4372
4373 dma_mask = 0;
4374
4375 /* Prime reply FIFO... */
4376
4377 if (ioc->reply_frames == NULL) {
4378 if ( (num_chain = initChainBuffers(ioc)) < 0)
4379 return -1;
4380 /*
4381 * 1078 errata workaround for the 36GB limitation
4382 */
4383 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4384 ioc->dma_mask > DMA_BIT_MASK(35)) {
4385 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4386 && !pci_set_consistent_dma_mask(ioc->pcidev,
4387 DMA_BIT_MASK(32))) {
4388 dma_mask = DMA_BIT_MASK(35);
4389 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4390 "setting 35 bit addressing for "
4391 "Request/Reply/Chain and Sense Buffers\n",
4392 ioc->name));
4393 } else {
4394 /*Reseting DMA mask to 64 bit*/
4395 pci_set_dma_mask(ioc->pcidev,
4396 DMA_BIT_MASK(64));
4397 pci_set_consistent_dma_mask(ioc->pcidev,
4398 DMA_BIT_MASK(64));
4399
4400 printk(MYIOC_s_ERR_FMT
4401 "failed setting 35 bit addressing for "
4402 "Request/Reply/Chain and Sense Buffers\n",
4403 ioc->name);
4404 return -1;
4405 }
4406 }
4407
4408 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4409 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4410 ioc->name, ioc->reply_sz, ioc->reply_depth));
4411 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4412 ioc->name, reply_sz, reply_sz));
4413
4414 sz = (ioc->req_sz * ioc->req_depth);
4415 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4416 ioc->name, ioc->req_sz, ioc->req_depth));
4417 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4418 ioc->name, sz, sz));
4419 total_size += sz;
4420
4421 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4422 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4423 ioc->name, ioc->req_sz, num_chain));
4424 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4425 ioc->name, sz, sz, num_chain));
4426
4427 total_size += sz;
4428 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4429 if (mem == NULL) {
4430 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4431 ioc->name);
4432 goto out_fail;
4433 }
4434
4435 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4436 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4437
4438 memset(mem, 0, total_size);
4439 ioc->alloc_total += total_size;
4440 ioc->alloc = mem;
4441 ioc->alloc_dma = alloc_dma;
4442 ioc->alloc_sz = total_size;
4443 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4444 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4445
4446 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4447 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4448
4449 alloc_dma += reply_sz;
4450 mem += reply_sz;
4451
4452 /* Request FIFO - WE manage this! */
4453
4454 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4455 ioc->req_frames_dma = alloc_dma;
4456
4457 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4458 ioc->name, mem, (void *)(ulong)alloc_dma));
4459
4460 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4461
4462#if defined(CONFIG_MTRR) && 0
4463 /*
4464 * Enable Write Combining MTRR for IOC's memory region.
4465 * (at least as much as we can; "size and base must be
4466 * multiples of 4 kiB"
4467 */
4468 ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma,
4469 sz,
4470 MTRR_TYPE_WRCOMB, 1);
4471 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MTRR region registered (base:size=%08x:%x)\n",
4472 ioc->name, ioc->req_frames_dma, sz));
4473#endif
4474
4475 for (i = 0; i < ioc->req_depth; i++) {
4476 alloc_dma += ioc->req_sz;
4477 mem += ioc->req_sz;
4478 }
4479
4480 ioc->ChainBuffer = mem;
4481 ioc->ChainBufferDMA = alloc_dma;
4482
4483 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4484 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4485
4486 /* Initialize the free chain Q.
4487 */
4488
4489 INIT_LIST_HEAD(&ioc->FreeChainQ);
4490
4491 /* Post the chain buffers to the FreeChainQ.
4492 */
4493 mem = (u8 *)ioc->ChainBuffer;
4494 for (i=0; i < num_chain; i++) {
4495 mf = (MPT_FRAME_HDR *) mem;
4496 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4497 mem += ioc->req_sz;
4498 }
4499
4500 /* Initialize Request frames linked list
4501 */
4502 alloc_dma = ioc->req_frames_dma;
4503 mem = (u8 *) ioc->req_frames;
4504
4505 spin_lock_irqsave(&ioc->FreeQlock, flags);
4506 INIT_LIST_HEAD(&ioc->FreeQ);
4507 for (i = 0; i < ioc->req_depth; i++) {
4508 mf = (MPT_FRAME_HDR *) mem;
4509
4510 /* Queue REQUESTs *internally*! */
4511 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4512
4513 mem += ioc->req_sz;
4514 }
4515 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4516
4517 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4518 ioc->sense_buf_pool =
4519 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4520 if (ioc->sense_buf_pool == NULL) {
4521 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4522 ioc->name);
4523 goto out_fail;
4524 }
4525
4526 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4527 ioc->alloc_total += sz;
4528 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4529 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4530
4531 }
4532
4533 /* Post Reply frames to FIFO
4534 */
4535 alloc_dma = ioc->alloc_dma;
4536 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4537 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4538
4539 for (i = 0; i < ioc->reply_depth; i++) {
4540 /* Write each address to the IOC! */
4541 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4542 alloc_dma += ioc->reply_sz;
4543 }
4544
4545 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4546 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4547 ioc->dma_mask))
4548 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4549 "restoring 64 bit addressing\n", ioc->name));
4550
4551 return 0;
4552
4553out_fail:
4554
4555 if (ioc->alloc != NULL) {
4556 sz = ioc->alloc_sz;
4557 pci_free_consistent(ioc->pcidev,
4558 sz,
4559 ioc->alloc, ioc->alloc_dma);
4560 ioc->reply_frames = NULL;
4561 ioc->req_frames = NULL;
4562 ioc->alloc_total -= sz;
4563 }
4564 if (ioc->sense_buf_pool != NULL) {
4565 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4566 pci_free_consistent(ioc->pcidev,
4567 sz,
4568 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4569 ioc->sense_buf_pool = NULL;
4570 }
4571
4572 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4573 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4574 DMA_BIT_MASK(64)))
4575 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4576 "restoring 64 bit addressing\n", ioc->name));
4577
4578 return -1;
4579}
4580
4581/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4582/**
4583 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4584 * from IOC via doorbell handshake method.
4585 * @ioc: Pointer to MPT_ADAPTER structure
4586 * @reqBytes: Size of the request in bytes
4587 * @req: Pointer to MPT request frame
4588 * @replyBytes: Expected size of the reply in bytes
4589 * @u16reply: Pointer to area where reply should be written
4590 * @maxwait: Max wait time for a reply (in seconds)
4591 * @sleepFlag: Specifies whether the process can sleep
4592 *
4593 * NOTES: It is the callers responsibility to byte-swap fields in the
4594 * request which are greater than 1 byte in size. It is also the
4595 * callers responsibility to byte-swap response fields which are
4596 * greater than 1 byte in size.
4597 *
4598 * Returns 0 for success, non-zero for failure.
4599 */
4600static int
4601mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4602 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4603{
4604 MPIDefaultReply_t *mptReply;
4605 int failcnt = 0;
4606 int t;
4607
4608 /*
4609 * Get ready to cache a handshake reply
4610 */
4611 ioc->hs_reply_idx = 0;
4612 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4613 mptReply->MsgLength = 0;
4614
4615 /*
4616 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4617 * then tell IOC that we want to handshake a request of N words.
4618 * (WRITE u32val to Doorbell reg).
4619 */
4620 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4621 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4622 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4623 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4624
4625 /*
4626 * Wait for IOC's doorbell handshake int
4627 */
4628 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4629 failcnt++;
4630
4631 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4632 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4633
4634 /* Read doorbell and check for active bit */
4635 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4636 return -1;
4637
4638 /*
4639 * Clear doorbell int (WRITE 0 to IntStatus reg),
4640 * then wait for IOC to ACKnowledge that it's ready for
4641 * our handshake request.
4642 */
4643 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4644 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4645 failcnt++;
4646
4647 if (!failcnt) {
4648 int ii;
4649 u8 *req_as_bytes = (u8 *) req;
4650
4651 /*
4652 * Stuff request words via doorbell handshake,
4653 * with ACK from IOC for each.
4654 */
4655 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4656 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4657 (req_as_bytes[(ii*4) + 1] << 8) |
4658 (req_as_bytes[(ii*4) + 2] << 16) |
4659 (req_as_bytes[(ii*4) + 3] << 24));
4660
4661 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4662 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4663 failcnt++;
4664 }
4665
4666 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4667 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4668
4669 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4670 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4671
4672 /*
4673 * Wait for completion of doorbell handshake reply from the IOC
4674 */
4675 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4676 failcnt++;
4677
4678 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4679 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4680
4681 /*
4682 * Copy out the cached reply...
4683 */
4684 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4685 u16reply[ii] = ioc->hs_reply[ii];
4686 } else {
4687 return -99;
4688 }
4689
4690 return -failcnt;
4691}
4692
4693/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4694/**
4695 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4696 * @ioc: Pointer to MPT_ADAPTER structure
4697 * @howlong: How long to wait (in seconds)
4698 * @sleepFlag: Specifies whether the process can sleep
4699 *
4700 * This routine waits (up to ~2 seconds max) for IOC doorbell
4701 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4702 * bit in its IntStatus register being clear.
4703 *
4704 * Returns a negative value on failure, else wait loop count.
4705 */
4706static int
4707WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4708{
4709 int cntdn;
4710 int count = 0;
4711 u32 intstat=0;
4712
4713 cntdn = 1000 * howlong;
4714
4715 if (sleepFlag == CAN_SLEEP) {
4716 while (--cntdn) {
4717 msleep (1);
4718 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4719 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4720 break;
4721 count++;
4722 }
4723 } else {
4724 while (--cntdn) {
4725 udelay (1000);
4726 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4727 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4728 break;
4729 count++;
4730 }
4731 }
4732
4733 if (cntdn) {
4734 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4735 ioc->name, count));
4736 return count;
4737 }
4738
4739 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4740 ioc->name, count, intstat);
4741 return -1;
4742}
4743
4744/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4745/**
4746 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4747 * @ioc: Pointer to MPT_ADAPTER structure
4748 * @howlong: How long to wait (in seconds)
4749 * @sleepFlag: Specifies whether the process can sleep
4750 *
4751 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4752 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4753 *
4754 * Returns a negative value on failure, else wait loop count.
4755 */
4756static int
4757WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4758{
4759 int cntdn;
4760 int count = 0;
4761 u32 intstat=0;
4762
4763 cntdn = 1000 * howlong;
4764 if (sleepFlag == CAN_SLEEP) {
4765 while (--cntdn) {
4766 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4767 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4768 break;
4769 msleep(1);
4770 count++;
4771 }
4772 } else {
4773 while (--cntdn) {
4774 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4775 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4776 break;
4777 udelay (1000);
4778 count++;
4779 }
4780 }
4781
4782 if (cntdn) {
4783 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4784 ioc->name, count, howlong));
4785 return count;
4786 }
4787
4788 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4789 ioc->name, count, intstat);
4790 return -1;
4791}
4792
4793/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4794/**
4795 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4796 * @ioc: Pointer to MPT_ADAPTER structure
4797 * @howlong: How long to wait (in seconds)
4798 * @sleepFlag: Specifies whether the process can sleep
4799 *
4800 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4801 * Reply is cached to IOC private area large enough to hold a maximum
4802 * of 128 bytes of reply data.
4803 *
4804 * Returns a negative value on failure, else size of reply in WORDS.
4805 */
4806static int
4807WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4808{
4809 int u16cnt = 0;
4810 int failcnt = 0;
4811 int t;
4812 u16 *hs_reply = ioc->hs_reply;
4813 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4814 u16 hword;
4815
4816 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4817
4818 /*
4819 * Get first two u16's so we can look at IOC's intended reply MsgLength
4820 */
4821 u16cnt=0;
4822 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4823 failcnt++;
4824 } else {
4825 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4826 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4827 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4828 failcnt++;
4829 else {
4830 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4831 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4832 }
4833 }
4834
4835 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4836 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4837 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4838
4839 /*
4840 * If no error (and IOC said MsgLength is > 0), piece together
4841 * reply 16 bits at a time.
4842 */
4843 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4844 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4845 failcnt++;
4846 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4847 /* don't overflow our IOC hs_reply[] buffer! */
4848 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4849 hs_reply[u16cnt] = hword;
4850 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4851 }
4852
4853 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4854 failcnt++;
4855 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4856
4857 if (failcnt) {
4858 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4859 ioc->name);
4860 return -failcnt;
4861 }
4862#if 0
4863 else if (u16cnt != (2 * mptReply->MsgLength)) {
4864 return -101;
4865 }
4866 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4867 return -102;
4868 }
4869#endif
4870
4871 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4872 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4873
4874 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4875 ioc->name, t, u16cnt/2));
4876 return u16cnt/2;
4877}
4878
4879/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4880/**
4881 * GetLanConfigPages - Fetch LANConfig pages.
4882 * @ioc: Pointer to MPT_ADAPTER structure
4883 *
4884 * Return: 0 for success
4885 * -ENOMEM if no memory available
4886 * -EPERM if not allowed due to ISR context
4887 * -EAGAIN if no msg frames currently available
4888 * -EFAULT for non-successful reply or no reply (timeout)
4889 */
4890static int
4891GetLanConfigPages(MPT_ADAPTER *ioc)
4892{
4893 ConfigPageHeader_t hdr;
4894 CONFIGPARMS cfg;
4895 LANPage0_t *ppage0_alloc;
4896 dma_addr_t page0_dma;
4897 LANPage1_t *ppage1_alloc;
4898 dma_addr_t page1_dma;
4899 int rc = 0;
4900 int data_sz;
4901 int copy_sz;
4902
4903 /* Get LAN Page 0 header */
4904 hdr.PageVersion = 0;
4905 hdr.PageLength = 0;
4906 hdr.PageNumber = 0;
4907 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4908 cfg.cfghdr.hdr = &hdr;
4909 cfg.physAddr = -1;
4910 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4911 cfg.dir = 0;
4912 cfg.pageAddr = 0;
4913 cfg.timeout = 0;
4914
4915 if ((rc = mpt_config(ioc, &cfg)) != 0)
4916 return rc;
4917
4918 if (hdr.PageLength > 0) {
4919 data_sz = hdr.PageLength * 4;
4920 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4921 rc = -ENOMEM;
4922 if (ppage0_alloc) {
4923 memset((u8 *)ppage0_alloc, 0, data_sz);
4924 cfg.physAddr = page0_dma;
4925 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4926
4927 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4928 /* save the data */
4929 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4930 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4931
4932 }
4933
4934 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4935
4936 /* FIXME!
4937 * Normalize endianness of structure data,
4938 * by byte-swapping all > 1 byte fields!
4939 */
4940
4941 }
4942
4943 if (rc)
4944 return rc;
4945 }
4946
4947 /* Get LAN Page 1 header */
4948 hdr.PageVersion = 0;
4949 hdr.PageLength = 0;
4950 hdr.PageNumber = 1;
4951 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4952 cfg.cfghdr.hdr = &hdr;
4953 cfg.physAddr = -1;
4954 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4955 cfg.dir = 0;
4956 cfg.pageAddr = 0;
4957
4958 if ((rc = mpt_config(ioc, &cfg)) != 0)
4959 return rc;
4960
4961 if (hdr.PageLength == 0)
4962 return 0;
4963
4964 data_sz = hdr.PageLength * 4;
4965 rc = -ENOMEM;
4966 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
4967 if (ppage1_alloc) {
4968 memset((u8 *)ppage1_alloc, 0, data_sz);
4969 cfg.physAddr = page1_dma;
4970 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4971
4972 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4973 /* save the data */
4974 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
4975 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
4976 }
4977
4978 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
4979
4980 /* FIXME!
4981 * Normalize endianness of structure data,
4982 * by byte-swapping all > 1 byte fields!
4983 */
4984
4985 }
4986
4987 return rc;
4988}
4989
4990/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4991/**
4992 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
4993 * @ioc: Pointer to MPT_ADAPTER structure
4994 * @persist_opcode: see below
4995 *
4996 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
4997 * devices not currently present.
4998 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
4999 *
5000 * NOTE: Don't use not this function during interrupt time.
5001 *
5002 * Returns 0 for success, non-zero error
5003 */
5004
5005/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5006int
5007mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5008{
5009 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5010 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5011 MPT_FRAME_HDR *mf = NULL;
5012 MPIHeader_t *mpi_hdr;
5013 int ret = 0;
5014 unsigned long timeleft;
5015
5016 mutex_lock(&ioc->mptbase_cmds.mutex);
5017
5018 /* init the internal cmd struct */
5019 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5020 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5021
5022 /* insure garbage is not sent to fw */
5023 switch(persist_opcode) {
5024
5025 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5026 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5027 break;
5028
5029 default:
5030 ret = -1;
5031 goto out;
5032 }
5033
5034 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5035 __func__, persist_opcode);
5036
5037 /* Get a MF for this command.
5038 */
5039 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5040 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5041 ret = -1;
5042 goto out;
5043 }
5044
5045 mpi_hdr = (MPIHeader_t *) mf;
5046 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5047 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5048 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5049 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5050 sasIoUnitCntrReq->Operation = persist_opcode;
5051
5052 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5053 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5054 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5055 ret = -ETIME;
5056 printk(KERN_DEBUG "%s: failed\n", __func__);
5057 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5058 goto out;
5059 if (!timeleft) {
5060 printk(MYIOC_s_WARN_FMT
5061 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5062 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5063 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5064 mpt_free_msg_frame(ioc, mf);
5065 }
5066 goto out;
5067 }
5068
5069 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5070 ret = -1;
5071 goto out;
5072 }
5073
5074 sasIoUnitCntrReply =
5075 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5076 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5077 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5078 __func__, sasIoUnitCntrReply->IOCStatus,
5079 sasIoUnitCntrReply->IOCLogInfo);
5080 printk(KERN_DEBUG "%s: failed\n", __func__);
5081 ret = -1;
5082 } else
5083 printk(KERN_DEBUG "%s: success\n", __func__);
5084 out:
5085
5086 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5087 mutex_unlock(&ioc->mptbase_cmds.mutex);
5088 return ret;
5089}
5090
5091/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5092
5093static void
5094mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5095 MpiEventDataRaid_t * pRaidEventData)
5096{
5097 int volume;
5098 int reason;
5099 int disk;
5100 int status;
5101 int flags;
5102 int state;
5103
5104 volume = pRaidEventData->VolumeID;
5105 reason = pRaidEventData->ReasonCode;
5106 disk = pRaidEventData->PhysDiskNum;
5107 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5108 flags = (status >> 0) & 0xff;
5109 state = (status >> 8) & 0xff;
5110
5111 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5112 return;
5113 }
5114
5115 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5116 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5117 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5118 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5119 ioc->name, disk, volume);
5120 } else {
5121 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5122 ioc->name, volume);
5123 }
5124
5125 switch(reason) {
5126 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5127 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5128 ioc->name);
5129 break;
5130
5131 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5132
5133 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5134 ioc->name);
5135 break;
5136
5137 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5138 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5139 ioc->name);
5140 break;
5141
5142 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5143 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5144 ioc->name,
5145 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5146 ? "optimal"
5147 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5148 ? "degraded"
5149 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5150 ? "failed"
5151 : "state unknown",
5152 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5153 ? ", enabled" : "",
5154 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5155 ? ", quiesced" : "",
5156 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5157 ? ", resync in progress" : "" );
5158 break;
5159
5160 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5161 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5162 ioc->name, disk);
5163 break;
5164
5165 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5166 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5167 ioc->name);
5168 break;
5169
5170 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5171 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5172 ioc->name);
5173 break;
5174
5175 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5176 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5177 ioc->name);
5178 break;
5179
5180 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5181 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5182 ioc->name,
5183 state == MPI_PHYSDISK0_STATUS_ONLINE
5184 ? "online"
5185 : state == MPI_PHYSDISK0_STATUS_MISSING
5186 ? "missing"
5187 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5188 ? "not compatible"
5189 : state == MPI_PHYSDISK0_STATUS_FAILED
5190 ? "failed"
5191 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5192 ? "initializing"
5193 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5194 ? "offline requested"
5195 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5196 ? "failed requested"
5197 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5198 ? "offline"
5199 : "state unknown",
5200 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5201 ? ", out of sync" : "",
5202 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5203 ? ", quiesced" : "" );
5204 break;
5205
5206 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5207 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5208 ioc->name, disk);
5209 break;
5210
5211 case MPI_EVENT_RAID_RC_SMART_DATA:
5212 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5213 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5214 break;
5215
5216 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5217 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5218 ioc->name, disk);
5219 break;
5220 }
5221}
5222
5223/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5224/**
5225 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5226 * @ioc: Pointer to MPT_ADAPTER structure
5227 *
5228 * Returns: 0 for success
5229 * -ENOMEM if no memory available
5230 * -EPERM if not allowed due to ISR context
5231 * -EAGAIN if no msg frames currently available
5232 * -EFAULT for non-successful reply or no reply (timeout)
5233 */
5234static int
5235GetIoUnitPage2(MPT_ADAPTER *ioc)
5236{
5237 ConfigPageHeader_t hdr;
5238 CONFIGPARMS cfg;
5239 IOUnitPage2_t *ppage_alloc;
5240 dma_addr_t page_dma;
5241 int data_sz;
5242 int rc;
5243
5244 /* Get the page header */
5245 hdr.PageVersion = 0;
5246 hdr.PageLength = 0;
5247 hdr.PageNumber = 2;
5248 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5249 cfg.cfghdr.hdr = &hdr;
5250 cfg.physAddr = -1;
5251 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5252 cfg.dir = 0;
5253 cfg.pageAddr = 0;
5254 cfg.timeout = 0;
5255
5256 if ((rc = mpt_config(ioc, &cfg)) != 0)
5257 return rc;
5258
5259 if (hdr.PageLength == 0)
5260 return 0;
5261
5262 /* Read the config page */
5263 data_sz = hdr.PageLength * 4;
5264 rc = -ENOMEM;
5265 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5266 if (ppage_alloc) {
5267 memset((u8 *)ppage_alloc, 0, data_sz);
5268 cfg.physAddr = page_dma;
5269 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5270
5271 /* If Good, save data */
5272 if ((rc = mpt_config(ioc, &cfg)) == 0)
5273 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5274
5275 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5276 }
5277
5278 return rc;
5279}
5280
5281/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5282/**
5283 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5284 * @ioc: Pointer to a Adapter Strucutre
5285 * @portnum: IOC port number
5286 *
5287 * Return: -EFAULT if read of config page header fails
5288 * or if no nvram
5289 * If read of SCSI Port Page 0 fails,
5290 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5291 * Adapter settings: async, narrow
5292 * Return 1
5293 * If read of SCSI Port Page 2 fails,
5294 * Adapter settings valid
5295 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5296 * Return 1
5297 * Else
5298 * Both valid
5299 * Return 0
5300 * CHECK - what type of locking mechanisms should be used????
5301 */
5302static int
5303mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5304{
5305 u8 *pbuf;
5306 dma_addr_t buf_dma;
5307 CONFIGPARMS cfg;
5308 ConfigPageHeader_t header;
5309 int ii;
5310 int data, rc = 0;
5311
5312 /* Allocate memory
5313 */
5314 if (!ioc->spi_data.nvram) {
5315 int sz;
5316 u8 *mem;
5317 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5318 mem = kmalloc(sz, GFP_ATOMIC);
5319 if (mem == NULL)
5320 return -EFAULT;
5321
5322 ioc->spi_data.nvram = (int *) mem;
5323
5324 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5325 ioc->name, ioc->spi_data.nvram, sz));
5326 }
5327
5328 /* Invalidate NVRAM information
5329 */
5330 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5331 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5332 }
5333
5334 /* Read SPP0 header, allocate memory, then read page.
5335 */
5336 header.PageVersion = 0;
5337 header.PageLength = 0;
5338 header.PageNumber = 0;
5339 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5340 cfg.cfghdr.hdr = &header;
5341 cfg.physAddr = -1;
5342 cfg.pageAddr = portnum;
5343 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5344 cfg.dir = 0;
5345 cfg.timeout = 0; /* use default */
5346 if (mpt_config(ioc, &cfg) != 0)
5347 return -EFAULT;
5348
5349 if (header.PageLength > 0) {
5350 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5351 if (pbuf) {
5352 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5353 cfg.physAddr = buf_dma;
5354 if (mpt_config(ioc, &cfg) != 0) {
5355 ioc->spi_data.maxBusWidth = MPT_NARROW;
5356 ioc->spi_data.maxSyncOffset = 0;
5357 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5358 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5359 rc = 1;
5360 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5361 "Unable to read PortPage0 minSyncFactor=%x\n",
5362 ioc->name, ioc->spi_data.minSyncFactor));
5363 } else {
5364 /* Save the Port Page 0 data
5365 */
5366 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5367 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5368 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5369
5370 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5371 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5372 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5373 "noQas due to Capabilities=%x\n",
5374 ioc->name, pPP0->Capabilities));
5375 }
5376 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5377 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5378 if (data) {
5379 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5380 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5381 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5382 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5383 "PortPage0 minSyncFactor=%x\n",
5384 ioc->name, ioc->spi_data.minSyncFactor));
5385 } else {
5386 ioc->spi_data.maxSyncOffset = 0;
5387 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5388 }
5389
5390 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5391
5392 /* Update the minSyncFactor based on bus type.
5393 */
5394 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5395 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5396
5397 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5398 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5399 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5400 "HVD or SE detected, minSyncFactor=%x\n",
5401 ioc->name, ioc->spi_data.minSyncFactor));
5402 }
5403 }
5404 }
5405 if (pbuf) {
5406 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5407 }
5408 }
5409 }
5410
5411 /* SCSI Port Page 2 - Read the header then the page.
5412 */
5413 header.PageVersion = 0;
5414 header.PageLength = 0;
5415 header.PageNumber = 2;
5416 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5417 cfg.cfghdr.hdr = &header;
5418 cfg.physAddr = -1;
5419 cfg.pageAddr = portnum;
5420 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5421 cfg.dir = 0;
5422 if (mpt_config(ioc, &cfg) != 0)
5423 return -EFAULT;
5424
5425 if (header.PageLength > 0) {
5426 /* Allocate memory and read SCSI Port Page 2
5427 */
5428 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5429 if (pbuf) {
5430 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5431 cfg.physAddr = buf_dma;
5432 if (mpt_config(ioc, &cfg) != 0) {
5433 /* Nvram data is left with INVALID mark
5434 */
5435 rc = 1;
5436 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5437
5438 /* This is an ATTO adapter, read Page2 accordingly
5439 */
5440 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5441 ATTODeviceInfo_t *pdevice = NULL;
5442 u16 ATTOFlags;
5443
5444 /* Save the Port Page 2 data
5445 * (reformat into a 32bit quantity)
5446 */
5447 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5448 pdevice = &pPP2->DeviceSettings[ii];
5449 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5450 data = 0;
5451
5452 /* Translate ATTO device flags to LSI format
5453 */
5454 if (ATTOFlags & ATTOFLAG_DISC)
5455 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5456 if (ATTOFlags & ATTOFLAG_ID_ENB)
5457 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5458 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5459 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5460 if (ATTOFlags & ATTOFLAG_TAGGED)
5461 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5462 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5463 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5464
5465 data = (data << 16) | (pdevice->Period << 8) | 10;
5466 ioc->spi_data.nvram[ii] = data;
5467 }
5468 } else {
5469 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5470 MpiDeviceInfo_t *pdevice = NULL;
5471
5472 /*
5473 * Save "Set to Avoid SCSI Bus Resets" flag
5474 */
5475 ioc->spi_data.bus_reset =
5476 (le32_to_cpu(pPP2->PortFlags) &
5477 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5478 0 : 1 ;
5479
5480 /* Save the Port Page 2 data
5481 * (reformat into a 32bit quantity)
5482 */
5483 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5484 ioc->spi_data.PortFlags = data;
5485 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5486 pdevice = &pPP2->DeviceSettings[ii];
5487 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5488 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5489 ioc->spi_data.nvram[ii] = data;
5490 }
5491 }
5492
5493 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5494 }
5495 }
5496
5497 /* Update Adapter limits with those from NVRAM
5498 * Comment: Don't need to do this. Target performance
5499 * parameters will never exceed the adapters limits.
5500 */
5501
5502 return rc;
5503}
5504
5505/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5506/**
5507 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5508 * @ioc: Pointer to a Adapter Strucutre
5509 * @portnum: IOC port number
5510 *
5511 * Return: -EFAULT if read of config page header fails
5512 * or 0 if success.
5513 */
5514static int
5515mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5516{
5517 CONFIGPARMS cfg;
5518 ConfigPageHeader_t header;
5519
5520 /* Read the SCSI Device Page 1 header
5521 */
5522 header.PageVersion = 0;
5523 header.PageLength = 0;
5524 header.PageNumber = 1;
5525 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5526 cfg.cfghdr.hdr = &header;
5527 cfg.physAddr = -1;
5528 cfg.pageAddr = portnum;
5529 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5530 cfg.dir = 0;
5531 cfg.timeout = 0;
5532 if (mpt_config(ioc, &cfg) != 0)
5533 return -EFAULT;
5534
5535 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5536 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5537
5538 header.PageVersion = 0;
5539 header.PageLength = 0;
5540 header.PageNumber = 0;
5541 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5542 if (mpt_config(ioc, &cfg) != 0)
5543 return -EFAULT;
5544
5545 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5546 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5547
5548 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5549 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5550
5551 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5552 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5553 return 0;
5554}
5555
5556/**
5557 * mpt_inactive_raid_list_free - This clears this link list.
5558 * @ioc : pointer to per adapter structure
5559 **/
5560static void
5561mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5562{
5563 struct inactive_raid_component_info *component_info, *pNext;
5564
5565 if (list_empty(&ioc->raid_data.inactive_list))
5566 return;
5567
5568 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5569 list_for_each_entry_safe(component_info, pNext,
5570 &ioc->raid_data.inactive_list, list) {
5571 list_del(&component_info->list);
5572 kfree(component_info);
5573 }
5574 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5575}
5576
5577/**
5578 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5579 *
5580 * @ioc : pointer to per adapter structure
5581 * @channel : volume channel
5582 * @id : volume target id
5583 **/
5584static void
5585mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5586{
5587 CONFIGPARMS cfg;
5588 ConfigPageHeader_t hdr;
5589 dma_addr_t dma_handle;
5590 pRaidVolumePage0_t buffer = NULL;
5591 int i;
5592 RaidPhysDiskPage0_t phys_disk;
5593 struct inactive_raid_component_info *component_info;
5594 int handle_inactive_volumes;
5595
5596 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5597 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5598 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5599 cfg.pageAddr = (channel << 8) + id;
5600 cfg.cfghdr.hdr = &hdr;
5601 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5602
5603 if (mpt_config(ioc, &cfg) != 0)
5604 goto out;
5605
5606 if (!hdr.PageLength)
5607 goto out;
5608
5609 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5610 &dma_handle);
5611
5612 if (!buffer)
5613 goto out;
5614
5615 cfg.physAddr = dma_handle;
5616 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5617
5618 if (mpt_config(ioc, &cfg) != 0)
5619 goto out;
5620
5621 if (!buffer->NumPhysDisks)
5622 goto out;
5623
5624 handle_inactive_volumes =
5625 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5626 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5627 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5628 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5629
5630 if (!handle_inactive_volumes)
5631 goto out;
5632
5633 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5634 for (i = 0; i < buffer->NumPhysDisks; i++) {
5635 if(mpt_raid_phys_disk_pg0(ioc,
5636 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5637 continue;
5638
5639 if ((component_info = kmalloc(sizeof (*component_info),
5640 GFP_KERNEL)) == NULL)
5641 continue;
5642
5643 component_info->volumeID = id;
5644 component_info->volumeBus = channel;
5645 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5646 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5647 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5648 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5649
5650 list_add_tail(&component_info->list,
5651 &ioc->raid_data.inactive_list);
5652 }
5653 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5654
5655 out:
5656 if (buffer)
5657 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5658 dma_handle);
5659}
5660
5661/**
5662 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5663 * @ioc: Pointer to a Adapter Structure
5664 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5665 * @phys_disk: requested payload data returned
5666 *
5667 * Return:
5668 * 0 on success
5669 * -EFAULT if read of config page header fails or data pointer not NULL
5670 * -ENOMEM if pci_alloc failed
5671 **/
5672int
5673mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5674 RaidPhysDiskPage0_t *phys_disk)
5675{
5676 CONFIGPARMS cfg;
5677 ConfigPageHeader_t hdr;
5678 dma_addr_t dma_handle;
5679 pRaidPhysDiskPage0_t buffer = NULL;
5680 int rc;
5681
5682 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5683 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5684 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5685
5686 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5687 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5688 cfg.cfghdr.hdr = &hdr;
5689 cfg.physAddr = -1;
5690 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5691
5692 if (mpt_config(ioc, &cfg) != 0) {
5693 rc = -EFAULT;
5694 goto out;
5695 }
5696
5697 if (!hdr.PageLength) {
5698 rc = -EFAULT;
5699 goto out;
5700 }
5701
5702 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5703 &dma_handle);
5704
5705 if (!buffer) {
5706 rc = -ENOMEM;
5707 goto out;
5708 }
5709
5710 cfg.physAddr = dma_handle;
5711 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5712 cfg.pageAddr = phys_disk_num;
5713
5714 if (mpt_config(ioc, &cfg) != 0) {
5715 rc = -EFAULT;
5716 goto out;
5717 }
5718
5719 rc = 0;
5720 memcpy(phys_disk, buffer, sizeof(*buffer));
5721 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5722
5723 out:
5724
5725 if (buffer)
5726 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5727 dma_handle);
5728
5729 return rc;
5730}
5731
5732/**
5733 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5734 * @ioc: Pointer to a Adapter Structure
5735 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5736 *
5737 * Return:
5738 * returns number paths
5739 **/
5740int
5741mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5742{
5743 CONFIGPARMS cfg;
5744 ConfigPageHeader_t hdr;
5745 dma_addr_t dma_handle;
5746 pRaidPhysDiskPage1_t buffer = NULL;
5747 int rc;
5748
5749 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5750 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5751
5752 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5753 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5754 hdr.PageNumber = 1;
5755 cfg.cfghdr.hdr = &hdr;
5756 cfg.physAddr = -1;
5757 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5758
5759 if (mpt_config(ioc, &cfg) != 0) {
5760 rc = 0;
5761 goto out;
5762 }
5763
5764 if (!hdr.PageLength) {
5765 rc = 0;
5766 goto out;
5767 }
5768
5769 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5770 &dma_handle);
5771
5772 if (!buffer) {
5773 rc = 0;
5774 goto out;
5775 }
5776
5777 cfg.physAddr = dma_handle;
5778 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5779 cfg.pageAddr = phys_disk_num;
5780
5781 if (mpt_config(ioc, &cfg) != 0) {
5782 rc = 0;
5783 goto out;
5784 }
5785
5786 rc = buffer->NumPhysDiskPaths;
5787 out:
5788
5789 if (buffer)
5790 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5791 dma_handle);
5792
5793 return rc;
5794}
5795EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5796
5797/**
5798 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5799 * @ioc: Pointer to a Adapter Structure
5800 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5801 * @phys_disk: requested payload data returned
5802 *
5803 * Return:
5804 * 0 on success
5805 * -EFAULT if read of config page header fails or data pointer not NULL
5806 * -ENOMEM if pci_alloc failed
5807 **/
5808int
5809mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5810 RaidPhysDiskPage1_t *phys_disk)
5811{
5812 CONFIGPARMS cfg;
5813 ConfigPageHeader_t hdr;
5814 dma_addr_t dma_handle;
5815 pRaidPhysDiskPage1_t buffer = NULL;
5816 int rc;
5817 int i;
5818 __le64 sas_address;
5819
5820 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5821 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5822 rc = 0;
5823
5824 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5825 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5826 hdr.PageNumber = 1;
5827 cfg.cfghdr.hdr = &hdr;
5828 cfg.physAddr = -1;
5829 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5830
5831 if (mpt_config(ioc, &cfg) != 0) {
5832 rc = -EFAULT;
5833 goto out;
5834 }
5835
5836 if (!hdr.PageLength) {
5837 rc = -EFAULT;
5838 goto out;
5839 }
5840
5841 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5842 &dma_handle);
5843
5844 if (!buffer) {
5845 rc = -ENOMEM;
5846 goto out;
5847 }
5848
5849 cfg.physAddr = dma_handle;
5850 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5851 cfg.pageAddr = phys_disk_num;
5852
5853 if (mpt_config(ioc, &cfg) != 0) {
5854 rc = -EFAULT;
5855 goto out;
5856 }
5857
5858 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5859 phys_disk->PhysDiskNum = phys_disk_num;
5860 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5861 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5862 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5863 phys_disk->Path[i].OwnerIdentifier =
5864 buffer->Path[i].OwnerIdentifier;
5865 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5866 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5867 sas_address = le64_to_cpu(sas_address);
5868 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5869 memcpy(&sas_address,
5870 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5871 sas_address = le64_to_cpu(sas_address);
5872 memcpy(&phys_disk->Path[i].OwnerWWID,
5873 &sas_address, sizeof(__le64));
5874 }
5875
5876 out:
5877
5878 if (buffer)
5879 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5880 dma_handle);
5881
5882 return rc;
5883}
5884EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5885
5886
5887/**
5888 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5889 * @ioc: Pointer to a Adapter Strucutre
5890 *
5891 * Return:
5892 * 0 on success
5893 * -EFAULT if read of config page header fails or data pointer not NULL
5894 * -ENOMEM if pci_alloc failed
5895 **/
5896int
5897mpt_findImVolumes(MPT_ADAPTER *ioc)
5898{
5899 IOCPage2_t *pIoc2;
5900 u8 *mem;
5901 dma_addr_t ioc2_dma;
5902 CONFIGPARMS cfg;
5903 ConfigPageHeader_t header;
5904 int rc = 0;
5905 int iocpage2sz;
5906 int i;
5907
5908 if (!ioc->ir_firmware)
5909 return 0;
5910
5911 /* Free the old page
5912 */
5913 kfree(ioc->raid_data.pIocPg2);
5914 ioc->raid_data.pIocPg2 = NULL;
5915 mpt_inactive_raid_list_free(ioc);
5916
5917 /* Read IOCP2 header then the page.
5918 */
5919 header.PageVersion = 0;
5920 header.PageLength = 0;
5921 header.PageNumber = 2;
5922 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5923 cfg.cfghdr.hdr = &header;
5924 cfg.physAddr = -1;
5925 cfg.pageAddr = 0;
5926 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5927 cfg.dir = 0;
5928 cfg.timeout = 0;
5929 if (mpt_config(ioc, &cfg) != 0)
5930 return -EFAULT;
5931
5932 if (header.PageLength == 0)
5933 return -EFAULT;
5934
5935 iocpage2sz = header.PageLength * 4;
5936 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5937 if (!pIoc2)
5938 return -ENOMEM;
5939
5940 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5941 cfg.physAddr = ioc2_dma;
5942 if (mpt_config(ioc, &cfg) != 0)
5943 goto out;
5944
5945 mem = kmalloc(iocpage2sz, GFP_KERNEL);
5946 if (!mem) {
5947 rc = -ENOMEM;
5948 goto out;
5949 }
5950
5951 memcpy(mem, (u8 *)pIoc2, iocpage2sz);
5952 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
5953
5954 mpt_read_ioc_pg_3(ioc);
5955
5956 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
5957 mpt_inactive_raid_volumes(ioc,
5958 pIoc2->RaidVolume[i].VolumeBus,
5959 pIoc2->RaidVolume[i].VolumeID);
5960
5961 out:
5962 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
5963
5964 return rc;
5965}
5966
5967static int
5968mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
5969{
5970 IOCPage3_t *pIoc3;
5971 u8 *mem;
5972 CONFIGPARMS cfg;
5973 ConfigPageHeader_t header;
5974 dma_addr_t ioc3_dma;
5975 int iocpage3sz = 0;
5976
5977 /* Free the old page
5978 */
5979 kfree(ioc->raid_data.pIocPg3);
5980 ioc->raid_data.pIocPg3 = NULL;
5981
5982 /* There is at least one physical disk.
5983 * Read and save IOC Page 3
5984 */
5985 header.PageVersion = 0;
5986 header.PageLength = 0;
5987 header.PageNumber = 3;
5988 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5989 cfg.cfghdr.hdr = &header;
5990 cfg.physAddr = -1;
5991 cfg.pageAddr = 0;
5992 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5993 cfg.dir = 0;
5994 cfg.timeout = 0;
5995 if (mpt_config(ioc, &cfg) != 0)
5996 return 0;
5997
5998 if (header.PageLength == 0)
5999 return 0;
6000
6001 /* Read Header good, alloc memory
6002 */
6003 iocpage3sz = header.PageLength * 4;
6004 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6005 if (!pIoc3)
6006 return 0;
6007
6008 /* Read the Page and save the data
6009 * into malloc'd memory.
6010 */
6011 cfg.physAddr = ioc3_dma;
6012 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6013 if (mpt_config(ioc, &cfg) == 0) {
6014 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6015 if (mem) {
6016 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6017 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6018 }
6019 }
6020
6021 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6022
6023 return 0;
6024}
6025
6026static void
6027mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6028{
6029 IOCPage4_t *pIoc4;
6030 CONFIGPARMS cfg;
6031 ConfigPageHeader_t header;
6032 dma_addr_t ioc4_dma;
6033 int iocpage4sz;
6034
6035 /* Read and save IOC Page 4
6036 */
6037 header.PageVersion = 0;
6038 header.PageLength = 0;
6039 header.PageNumber = 4;
6040 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6041 cfg.cfghdr.hdr = &header;
6042 cfg.physAddr = -1;
6043 cfg.pageAddr = 0;
6044 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6045 cfg.dir = 0;
6046 cfg.timeout = 0;
6047 if (mpt_config(ioc, &cfg) != 0)
6048 return;
6049
6050 if (header.PageLength == 0)
6051 return;
6052
6053 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6054 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6055 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6056 if (!pIoc4)
6057 return;
6058 ioc->alloc_total += iocpage4sz;
6059 } else {
6060 ioc4_dma = ioc->spi_data.IocPg4_dma;
6061 iocpage4sz = ioc->spi_data.IocPg4Sz;
6062 }
6063
6064 /* Read the Page into dma memory.
6065 */
6066 cfg.physAddr = ioc4_dma;
6067 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6068 if (mpt_config(ioc, &cfg) == 0) {
6069 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6070 ioc->spi_data.IocPg4_dma = ioc4_dma;
6071 ioc->spi_data.IocPg4Sz = iocpage4sz;
6072 } else {
6073 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6074 ioc->spi_data.pIocPg4 = NULL;
6075 ioc->alloc_total -= iocpage4sz;
6076 }
6077}
6078
6079static void
6080mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6081{
6082 IOCPage1_t *pIoc1;
6083 CONFIGPARMS cfg;
6084 ConfigPageHeader_t header;
6085 dma_addr_t ioc1_dma;
6086 int iocpage1sz = 0;
6087 u32 tmp;
6088
6089 /* Check the Coalescing Timeout in IOC Page 1
6090 */
6091 header.PageVersion = 0;
6092 header.PageLength = 0;
6093 header.PageNumber = 1;
6094 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6095 cfg.cfghdr.hdr = &header;
6096 cfg.physAddr = -1;
6097 cfg.pageAddr = 0;
6098 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6099 cfg.dir = 0;
6100 cfg.timeout = 0;
6101 if (mpt_config(ioc, &cfg) != 0)
6102 return;
6103
6104 if (header.PageLength == 0)
6105 return;
6106
6107 /* Read Header good, alloc memory
6108 */
6109 iocpage1sz = header.PageLength * 4;
6110 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6111 if (!pIoc1)
6112 return;
6113
6114 /* Read the Page and check coalescing timeout
6115 */
6116 cfg.physAddr = ioc1_dma;
6117 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6118 if (mpt_config(ioc, &cfg) == 0) {
6119
6120 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6121 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6122 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6123
6124 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6125 ioc->name, tmp));
6126
6127 if (tmp > MPT_COALESCING_TIMEOUT) {
6128 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6129
6130 /* Write NVRAM and current
6131 */
6132 cfg.dir = 1;
6133 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6134 if (mpt_config(ioc, &cfg) == 0) {
6135 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6136 ioc->name, MPT_COALESCING_TIMEOUT));
6137
6138 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6139 if (mpt_config(ioc, &cfg) == 0) {
6140 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6141 "Reset NVRAM Coalescing Timeout to = %d\n",
6142 ioc->name, MPT_COALESCING_TIMEOUT));
6143 } else {
6144 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6145 "Reset NVRAM Coalescing Timeout Failed\n",
6146 ioc->name));
6147 }
6148
6149 } else {
6150 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6151 "Reset of Current Coalescing Timeout Failed!\n",
6152 ioc->name));
6153 }
6154 }
6155
6156 } else {
6157 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6158 }
6159 }
6160
6161 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6162
6163 return;
6164}
6165
6166static void
6167mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6168{
6169 CONFIGPARMS cfg;
6170 ConfigPageHeader_t hdr;
6171 dma_addr_t buf_dma;
6172 ManufacturingPage0_t *pbuf = NULL;
6173
6174 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6175 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6176
6177 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6178 cfg.cfghdr.hdr = &hdr;
6179 cfg.physAddr = -1;
6180 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6181 cfg.timeout = 10;
6182
6183 if (mpt_config(ioc, &cfg) != 0)
6184 goto out;
6185
6186 if (!cfg.cfghdr.hdr->PageLength)
6187 goto out;
6188
6189 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6190 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6191 if (!pbuf)
6192 goto out;
6193
6194 cfg.physAddr = buf_dma;
6195
6196 if (mpt_config(ioc, &cfg) != 0)
6197 goto out;
6198
6199 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6200 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6201 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6202
6203 out:
6204
6205 if (pbuf)
6206 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6207}
6208
6209/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6210/**
6211 * SendEventNotification - Send EventNotification (on or off) request to adapter
6212 * @ioc: Pointer to MPT_ADAPTER structure
6213 * @EvSwitch: Event switch flags
6214 * @sleepFlag: Specifies whether the process can sleep
6215 */
6216static int
6217SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6218{
6219 EventNotification_t evn;
6220 MPIDefaultReply_t reply_buf;
6221
6222 memset(&evn, 0, sizeof(EventNotification_t));
6223 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6224
6225 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6226 evn.Switch = EvSwitch;
6227 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6228
6229 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6230 "Sending EventNotification (%d) request %p\n",
6231 ioc->name, EvSwitch, &evn));
6232
6233 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6234 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6235 sleepFlag);
6236}
6237
6238/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6239/**
6240 * SendEventAck - Send EventAck request to MPT adapter.
6241 * @ioc: Pointer to MPT_ADAPTER structure
6242 * @evnp: Pointer to original EventNotification request
6243 */
6244static int
6245SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6246{
6247 EventAck_t *pAck;
6248
6249 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6250 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6251 ioc->name, __func__));
6252 return -1;
6253 }
6254
6255 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6256
6257 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6258 pAck->ChainOffset = 0;
6259 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6260 pAck->MsgFlags = 0;
6261 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6262 pAck->Event = evnp->Event;
6263 pAck->EventContext = evnp->EventContext;
6264
6265 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6266
6267 return 0;
6268}
6269
6270/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6271/**
6272 * mpt_config - Generic function to issue config message
6273 * @ioc: Pointer to an adapter structure
6274 * @pCfg: Pointer to a configuration structure. Struct contains
6275 * action, page address, direction, physical address
6276 * and pointer to a configuration page header
6277 * Page header is updated.
6278 *
6279 * Returns 0 for success
6280 * -EPERM if not allowed due to ISR context
6281 * -EAGAIN if no msg frames currently available
6282 * -EFAULT for non-successful reply or no reply (timeout)
6283 */
6284int
6285mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6286{
6287 Config_t *pReq;
6288 ConfigReply_t *pReply;
6289 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6290 MPT_FRAME_HDR *mf;
6291 int ii;
6292 int flagsLength;
6293 long timeout;
6294 int ret;
6295 u8 page_type = 0, extend_page;
6296 unsigned long timeleft;
6297 unsigned long flags;
6298 int in_isr;
6299 u8 issue_hard_reset = 0;
6300 u8 retry_count = 0;
6301
6302 /* Prevent calling wait_event() (below), if caller happens
6303 * to be in ISR context, because that is fatal!
6304 */
6305 in_isr = in_interrupt();
6306 if (in_isr) {
6307 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6308 ioc->name));
6309 return -EPERM;
6310 }
6311
6312 /* don't send a config page during diag reset */
6313 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6314 if (ioc->ioc_reset_in_progress) {
6315 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6316 "%s: busy with host reset\n", ioc->name, __func__));
6317 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6318 return -EBUSY;
6319 }
6320 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6321
6322 /* don't send if no chance of success */
6323 if (!ioc->active ||
6324 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6325 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6326 "%s: ioc not operational, %d, %xh\n",
6327 ioc->name, __func__, ioc->active,
6328 mpt_GetIocState(ioc, 0)));
6329 return -EFAULT;
6330 }
6331
6332 retry_config:
6333 mutex_lock(&ioc->mptbase_cmds.mutex);
6334 /* init the internal cmd struct */
6335 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6336 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6337
6338 /* Get and Populate a free Frame
6339 */
6340 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6341 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6342 "mpt_config: no msg frames!\n", ioc->name));
6343 ret = -EAGAIN;
6344 goto out;
6345 }
6346
6347 pReq = (Config_t *)mf;
6348 pReq->Action = pCfg->action;
6349 pReq->Reserved = 0;
6350 pReq->ChainOffset = 0;
6351 pReq->Function = MPI_FUNCTION_CONFIG;
6352
6353 /* Assume page type is not extended and clear "reserved" fields. */
6354 pReq->ExtPageLength = 0;
6355 pReq->ExtPageType = 0;
6356 pReq->MsgFlags = 0;
6357
6358 for (ii=0; ii < 8; ii++)
6359 pReq->Reserved2[ii] = 0;
6360
6361 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6362 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6363 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6364 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6365
6366 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6367 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6368 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6369 pReq->ExtPageType = pExtHdr->ExtPageType;
6370 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6371
6372 /* Page Length must be treated as a reserved field for the
6373 * extended header.
6374 */
6375 pReq->Header.PageLength = 0;
6376 }
6377
6378 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6379
6380 /* Add a SGE to the config request.
6381 */
6382 if (pCfg->dir)
6383 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6384 else
6385 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6386
6387 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6388 MPI_CONFIG_PAGETYPE_EXTENDED) {
6389 flagsLength |= pExtHdr->ExtPageLength * 4;
6390 page_type = pReq->ExtPageType;
6391 extend_page = 1;
6392 } else {
6393 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6394 page_type = pReq->Header.PageType;
6395 extend_page = 0;
6396 }
6397
6398 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6399 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6400 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6401
6402 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6403 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6404 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6405 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6406 timeout);
6407 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6408 ret = -ETIME;
6409 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6410 "Failed Sending Config request type 0x%x, page 0x%x,"
6411 " action %d, status %xh, time left %ld\n\n",
6412 ioc->name, page_type, pReq->Header.PageNumber,
6413 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6414 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6415 goto out;
6416 if (!timeleft)
6417 issue_hard_reset = 1;
6418 goto out;
6419 }
6420
6421 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6422 ret = -1;
6423 goto out;
6424 }
6425 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6426 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6427 if (ret == MPI_IOCSTATUS_SUCCESS) {
6428 if (extend_page) {
6429 pCfg->cfghdr.ehdr->ExtPageLength =
6430 le16_to_cpu(pReply->ExtPageLength);
6431 pCfg->cfghdr.ehdr->ExtPageType =
6432 pReply->ExtPageType;
6433 }
6434 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6435 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6436 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6437 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6438
6439 }
6440
6441 if (retry_count)
6442 printk(MYIOC_s_INFO_FMT "Retry completed "
6443 "ret=0x%x timeleft=%ld\n",
6444 ioc->name, ret, timeleft);
6445
6446 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6447 ret, le32_to_cpu(pReply->IOCLogInfo)));
6448
6449out:
6450
6451 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6452 mutex_unlock(&ioc->mptbase_cmds.mutex);
6453 if (issue_hard_reset) {
6454 issue_hard_reset = 0;
6455 printk(MYIOC_s_WARN_FMT
6456 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6457 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6458 if (retry_count == 0) {
6459 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6460 retry_count++;
6461 } else
6462 mpt_HardResetHandler(ioc, CAN_SLEEP);
6463
6464 mpt_free_msg_frame(ioc, mf);
6465 /* attempt one retry for a timed out command */
6466 if (retry_count < 2) {
6467 printk(MYIOC_s_INFO_FMT
6468 "Attempting Retry Config request"
6469 " type 0x%x, page 0x%x,"
6470 " action %d\n", ioc->name, page_type,
6471 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6472 retry_count++;
6473 goto retry_config;
6474 }
6475 }
6476 return ret;
6477
6478}
6479
6480/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6481/**
6482 * mpt_ioc_reset - Base cleanup for hard reset
6483 * @ioc: Pointer to the adapter structure
6484 * @reset_phase: Indicates pre- or post-reset functionality
6485 *
6486 * Remark: Frees resources with internally generated commands.
6487 */
6488static int
6489mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6490{
6491 switch (reset_phase) {
6492 case MPT_IOC_SETUP_RESET:
6493 ioc->taskmgmt_quiesce_io = 1;
6494 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6495 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6496 break;
6497 case MPT_IOC_PRE_RESET:
6498 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6499 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6500 break;
6501 case MPT_IOC_POST_RESET:
6502 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6503 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6504/* wake up mptbase_cmds */
6505 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6506 ioc->mptbase_cmds.status |=
6507 MPT_MGMT_STATUS_DID_IOCRESET;
6508 complete(&ioc->mptbase_cmds.done);
6509 }
6510/* wake up taskmgmt_cmds */
6511 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6512 ioc->taskmgmt_cmds.status |=
6513 MPT_MGMT_STATUS_DID_IOCRESET;
6514 complete(&ioc->taskmgmt_cmds.done);
6515 }
6516 break;
6517 default:
6518 break;
6519 }
6520
6521 return 1; /* currently means nothing really */
6522}
6523
6524
6525#ifdef CONFIG_PROC_FS /* { */
6526/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6527/*
6528 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6529 */
6530/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6531/**
6532 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6533 *
6534 * Returns 0 for success, non-zero for failure.
6535 */
6536static int
6537procmpt_create(void)
6538{
6539 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6540 if (mpt_proc_root_dir == NULL)
6541 return -ENOTDIR;
6542
6543 proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
6544 proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
6545 return 0;
6546}
6547
6548/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6549/**
6550 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6551 *
6552 * Returns 0 for success, non-zero for failure.
6553 */
6554static void
6555procmpt_destroy(void)
6556{
6557 remove_proc_entry("version", mpt_proc_root_dir);
6558 remove_proc_entry("summary", mpt_proc_root_dir);
6559 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6560}
6561
6562/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6563/*
6564 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6565 */
6566static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6567
6568static int mpt_summary_proc_show(struct seq_file *m, void *v)
6569{
6570 MPT_ADAPTER *ioc = m->private;
6571
6572 if (ioc) {
6573 seq_mpt_print_ioc_summary(ioc, m, 1);
6574 } else {
6575 list_for_each_entry(ioc, &ioc_list, list) {
6576 seq_mpt_print_ioc_summary(ioc, m, 1);
6577 }
6578 }
6579
6580 return 0;
6581}
6582
6583static int mpt_summary_proc_open(struct inode *inode, struct file *file)
6584{
6585 return single_open(file, mpt_summary_proc_show, PDE(inode)->data);
6586}
6587
6588static const struct file_operations mpt_summary_proc_fops = {
6589 .owner = THIS_MODULE,
6590 .open = mpt_summary_proc_open,
6591 .read = seq_read,
6592 .llseek = seq_lseek,
6593 .release = single_release,
6594};
6595
6596static int mpt_version_proc_show(struct seq_file *m, void *v)
6597{
6598 u8 cb_idx;
6599 int scsi, fc, sas, lan, ctl, targ, dmp;
6600 char *drvname;
6601
6602 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6603 seq_printf(m, " Fusion MPT base driver\n");
6604
6605 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6606 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6607 drvname = NULL;
6608 if (MptCallbacks[cb_idx]) {
6609 switch (MptDriverClass[cb_idx]) {
6610 case MPTSPI_DRIVER:
6611 if (!scsi++) drvname = "SPI host";
6612 break;
6613 case MPTFC_DRIVER:
6614 if (!fc++) drvname = "FC host";
6615 break;
6616 case MPTSAS_DRIVER:
6617 if (!sas++) drvname = "SAS host";
6618 break;
6619 case MPTLAN_DRIVER:
6620 if (!lan++) drvname = "LAN";
6621 break;
6622 case MPTSTM_DRIVER:
6623 if (!targ++) drvname = "SCSI target";
6624 break;
6625 case MPTCTL_DRIVER:
6626 if (!ctl++) drvname = "ioctl";
6627 break;
6628 }
6629
6630 if (drvname)
6631 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6632 }
6633 }
6634
6635 return 0;
6636}
6637
6638static int mpt_version_proc_open(struct inode *inode, struct file *file)
6639{
6640 return single_open(file, mpt_version_proc_show, NULL);
6641}
6642
6643static const struct file_operations mpt_version_proc_fops = {
6644 .owner = THIS_MODULE,
6645 .open = mpt_version_proc_open,
6646 .read = seq_read,
6647 .llseek = seq_lseek,
6648 .release = single_release,
6649};
6650
6651static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6652{
6653 MPT_ADAPTER *ioc = m->private;
6654 char expVer[32];
6655 int sz;
6656 int p;
6657
6658 mpt_get_fw_exp_ver(expVer, ioc);
6659
6660 seq_printf(m, "%s:", ioc->name);
6661 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6662 seq_printf(m, " (f/w download boot flag set)");
6663// if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6664// seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6665
6666 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6667 ioc->facts.ProductID,
6668 ioc->prod_name);
6669 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6670 if (ioc->facts.FWImageSize)
6671 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6672 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6673 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6674 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6675
6676 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6677 ioc->facts.CurrentHostMfaHighAddr);
6678 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6679 ioc->facts.CurrentSenseBufferHighAddr);
6680
6681 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6682 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6683
6684 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6685 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6686 /*
6687 * Rounding UP to nearest 4-kB boundary here...
6688 */
6689 sz = (ioc->req_sz * ioc->req_depth) + 128;
6690 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6691 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6692 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6693 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6694 4*ioc->facts.RequestFrameSize,
6695 ioc->facts.GlobalCredits);
6696
6697 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6698 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6699 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6700 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6701 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6702 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6703 ioc->facts.CurReplyFrameSize,
6704 ioc->facts.ReplyQueueDepth);
6705
6706 seq_printf(m, " MaxDevices = %d\n",
6707 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6708 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6709
6710 /* per-port info */
6711 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6712 seq_printf(m, " PortNumber = %d (of %d)\n",
6713 p+1,
6714 ioc->facts.NumberOfPorts);
6715 if (ioc->bus_type == FC) {
6716 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6717 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6718 seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
6719 a[5], a[4], a[3], a[2], a[1], a[0]);
6720 }
6721 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6722 ioc->fc_port_page0[p].WWNN.High,
6723 ioc->fc_port_page0[p].WWNN.Low,
6724 ioc->fc_port_page0[p].WWPN.High,
6725 ioc->fc_port_page0[p].WWPN.Low);
6726 }
6727 }
6728
6729 return 0;
6730}
6731
6732static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
6733{
6734 return single_open(file, mpt_iocinfo_proc_show, PDE(inode)->data);
6735}
6736
6737static const struct file_operations mpt_iocinfo_proc_fops = {
6738 .owner = THIS_MODULE,
6739 .open = mpt_iocinfo_proc_open,
6740 .read = seq_read,
6741 .llseek = seq_lseek,
6742 .release = single_release,
6743};
6744#endif /* CONFIG_PROC_FS } */
6745
6746/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6747static void
6748mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6749{
6750 buf[0] ='\0';
6751 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6752 sprintf(buf, " (Exp %02d%02d)",
6753 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6754 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6755
6756 /* insider hack! */
6757 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6758 strcat(buf, " [MDBG]");
6759 }
6760}
6761
6762/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6763/**
6764 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6765 * @ioc: Pointer to MPT_ADAPTER structure
6766 * @buffer: Pointer to buffer where IOC summary info should be written
6767 * @size: Pointer to number of bytes we wrote (set by this routine)
6768 * @len: Offset at which to start writing in buffer
6769 * @showlan: Display LAN stuff?
6770 *
6771 * This routine writes (english readable) ASCII text, which represents
6772 * a summary of IOC information, to a buffer.
6773 */
6774void
6775mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6776{
6777 char expVer[32];
6778 int y;
6779
6780 mpt_get_fw_exp_ver(expVer, ioc);
6781
6782 /*
6783 * Shorter summary of attached ioc's...
6784 */
6785 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6786 ioc->name,
6787 ioc->prod_name,
6788 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6789 ioc->facts.FWVersion.Word,
6790 expVer,
6791 ioc->facts.NumberOfPorts,
6792 ioc->req_depth);
6793
6794 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6795 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6796 y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6797 a[5], a[4], a[3], a[2], a[1], a[0]);
6798 }
6799
6800 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6801
6802 if (!ioc->active)
6803 y += sprintf(buffer+len+y, " (disabled)");
6804
6805 y += sprintf(buffer+len+y, "\n");
6806
6807 *size = y;
6808}
6809
6810static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6811{
6812 char expVer[32];
6813
6814 mpt_get_fw_exp_ver(expVer, ioc);
6815
6816 /*
6817 * Shorter summary of attached ioc's...
6818 */
6819 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6820 ioc->name,
6821 ioc->prod_name,
6822 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6823 ioc->facts.FWVersion.Word,
6824 expVer,
6825 ioc->facts.NumberOfPorts,
6826 ioc->req_depth);
6827
6828 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6829 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6830 seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6831 a[5], a[4], a[3], a[2], a[1], a[0]);
6832 }
6833
6834 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6835
6836 if (!ioc->active)
6837 seq_printf(m, " (disabled)");
6838
6839 seq_putc(m, '\n');
6840}
6841
6842/**
6843 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6844 * @ioc: Pointer to MPT_ADAPTER structure
6845 *
6846 * Returns 0 for SUCCESS or -1 if FAILED.
6847 *
6848 * If -1 is return, then it was not possible to set the flags
6849 **/
6850int
6851mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6852{
6853 unsigned long flags;
6854 int retval;
6855
6856 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6857 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6858 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6859 retval = -1;
6860 goto out;
6861 }
6862 retval = 0;
6863 ioc->taskmgmt_in_progress = 1;
6864 ioc->taskmgmt_quiesce_io = 1;
6865 if (ioc->alt_ioc) {
6866 ioc->alt_ioc->taskmgmt_in_progress = 1;
6867 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6868 }
6869 out:
6870 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6871 return retval;
6872}
6873EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6874
6875/**
6876 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6877 * @ioc: Pointer to MPT_ADAPTER structure
6878 *
6879 **/
6880void
6881mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6882{
6883 unsigned long flags;
6884
6885 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6886 ioc->taskmgmt_in_progress = 0;
6887 ioc->taskmgmt_quiesce_io = 0;
6888 if (ioc->alt_ioc) {
6889 ioc->alt_ioc->taskmgmt_in_progress = 0;
6890 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6891 }
6892 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6893}
6894EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6895
6896
6897/**
6898 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6899 * the kernel
6900 * @ioc: Pointer to MPT_ADAPTER structure
6901 *
6902 **/
6903void
6904mpt_halt_firmware(MPT_ADAPTER *ioc)
6905{
6906 u32 ioc_raw_state;
6907
6908 ioc_raw_state = mpt_GetIocState(ioc, 0);
6909
6910 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6911 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6912 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6913 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6914 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6915 } else {
6916 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6917 panic("%s: Firmware is halted due to command timeout\n",
6918 ioc->name);
6919 }
6920}
6921EXPORT_SYMBOL(mpt_halt_firmware);
6922
6923/**
6924 * mpt_SoftResetHandler - Issues a less expensive reset
6925 * @ioc: Pointer to MPT_ADAPTER structure
6926 * @sleepFlag: Indicates if sleep or schedule must be called.
6927 *
6928 * Returns 0 for SUCCESS or -1 if FAILED.
6929 *
6930 * Message Unit Reset - instructs the IOC to reset the Reply Post and
6931 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
6932 * All posted buffers are freed, and event notification is turned off.
6933 * IOC doesn't reply to any outstanding request. This will transfer IOC
6934 * to READY state.
6935 **/
6936int
6937mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
6938{
6939 int rc;
6940 int ii;
6941 u8 cb_idx;
6942 unsigned long flags;
6943 u32 ioc_state;
6944 unsigned long time_count;
6945
6946 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
6947 ioc->name));
6948
6949 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
6950
6951 if (mpt_fwfault_debug)
6952 mpt_halt_firmware(ioc);
6953
6954 if (ioc_state == MPI_IOC_STATE_FAULT ||
6955 ioc_state == MPI_IOC_STATE_RESET) {
6956 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6957 "skipping, either in FAULT or RESET state!\n", ioc->name));
6958 return -1;
6959 }
6960
6961 if (ioc->bus_type == FC) {
6962 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6963 "skipping, because the bus type is FC!\n", ioc->name));
6964 return -1;
6965 }
6966
6967 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6968 if (ioc->ioc_reset_in_progress) {
6969 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6970 return -1;
6971 }
6972 ioc->ioc_reset_in_progress = 1;
6973 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6974
6975 rc = -1;
6976
6977 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6978 if (MptResetHandlers[cb_idx])
6979 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
6980 }
6981
6982 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6983 if (ioc->taskmgmt_in_progress) {
6984 ioc->ioc_reset_in_progress = 0;
6985 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6986 return -1;
6987 }
6988 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6989 /* Disable reply interrupts (also blocks FreeQ) */
6990 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
6991 ioc->active = 0;
6992 time_count = jiffies;
6993
6994 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
6995
6996 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6997 if (MptResetHandlers[cb_idx])
6998 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
6999 }
7000
7001 if (rc)
7002 goto out;
7003
7004 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7005 if (ioc_state != MPI_IOC_STATE_READY)
7006 goto out;
7007
7008 for (ii = 0; ii < 5; ii++) {
7009 /* Get IOC facts! Allow 5 retries */
7010 rc = GetIocFacts(ioc, sleepFlag,
7011 MPT_HOSTEVENT_IOC_RECOVER);
7012 if (rc == 0)
7013 break;
7014 if (sleepFlag == CAN_SLEEP)
7015 msleep(100);
7016 else
7017 mdelay(100);
7018 }
7019 if (ii == 5)
7020 goto out;
7021
7022 rc = PrimeIocFifos(ioc);
7023 if (rc != 0)
7024 goto out;
7025
7026 rc = SendIocInit(ioc, sleepFlag);
7027 if (rc != 0)
7028 goto out;
7029
7030 rc = SendEventNotification(ioc, 1, sleepFlag);
7031 if (rc != 0)
7032 goto out;
7033
7034 if (ioc->hard_resets < -1)
7035 ioc->hard_resets++;
7036
7037 /*
7038 * At this point, we know soft reset succeeded.
7039 */
7040
7041 ioc->active = 1;
7042 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7043
7044 out:
7045 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7046 ioc->ioc_reset_in_progress = 0;
7047 ioc->taskmgmt_quiesce_io = 0;
7048 ioc->taskmgmt_in_progress = 0;
7049 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7050
7051 if (ioc->active) { /* otherwise, hard reset coming */
7052 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7053 if (MptResetHandlers[cb_idx])
7054 mpt_signal_reset(cb_idx, ioc,
7055 MPT_IOC_POST_RESET);
7056 }
7057 }
7058
7059 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7060 "SoftResetHandler: completed (%d seconds): %s\n",
7061 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7062 ((rc == 0) ? "SUCCESS" : "FAILED")));
7063
7064 return rc;
7065}
7066
7067/**
7068 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7069 * @ioc: Pointer to MPT_ADAPTER structure
7070 * @sleepFlag: Indicates if sleep or schedule must be called.
7071 *
7072 * Returns 0 for SUCCESS or -1 if FAILED.
7073 * Try for softreset first, only if it fails go for expensive
7074 * HardReset.
7075 **/
7076int
7077mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7078 int ret = -1;
7079
7080 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7081 if (ret == 0)
7082 return ret;
7083 ret = mpt_HardResetHandler(ioc, sleepFlag);
7084 return ret;
7085}
7086EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7087
7088/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7089/*
7090 * Reset Handling
7091 */
7092/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7093/**
7094 * mpt_HardResetHandler - Generic reset handler
7095 * @ioc: Pointer to MPT_ADAPTER structure
7096 * @sleepFlag: Indicates if sleep or schedule must be called.
7097 *
7098 * Issues SCSI Task Management call based on input arg values.
7099 * If TaskMgmt fails, returns associated SCSI request.
7100 *
7101 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7102 * or a non-interrupt thread. In the former, must not call schedule().
7103 *
7104 * Note: A return of -1 is a FATAL error case, as it means a
7105 * FW reload/initialization failed.
7106 *
7107 * Returns 0 for SUCCESS or -1 if FAILED.
7108 */
7109int
7110mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7111{
7112 int rc;
7113 u8 cb_idx;
7114 unsigned long flags;
7115 unsigned long time_count;
7116
7117 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7118#ifdef MFCNT
7119 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7120 printk("MF count 0x%x !\n", ioc->mfcnt);
7121#endif
7122 if (mpt_fwfault_debug)
7123 mpt_halt_firmware(ioc);
7124
7125 /* Reset the adapter. Prevent more than 1 call to
7126 * mpt_do_ioc_recovery at any instant in time.
7127 */
7128 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7129 if (ioc->ioc_reset_in_progress) {
7130 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7131 return 0;
7132 }
7133 ioc->ioc_reset_in_progress = 1;
7134 if (ioc->alt_ioc)
7135 ioc->alt_ioc->ioc_reset_in_progress = 1;
7136 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7137
7138
7139 /* The SCSI driver needs to adjust timeouts on all current
7140 * commands prior to the diagnostic reset being issued.
7141 * Prevents timeouts occurring during a diagnostic reset...very bad.
7142 * For all other protocol drivers, this is a no-op.
7143 */
7144 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7145 if (MptResetHandlers[cb_idx]) {
7146 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7147 if (ioc->alt_ioc)
7148 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7149 MPT_IOC_SETUP_RESET);
7150 }
7151 }
7152
7153 time_count = jiffies;
7154 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7155 if (rc != 0) {
7156 printk(KERN_WARNING MYNAM
7157 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7158 rc, ioc->name, mpt_GetIocState(ioc, 0));
7159 } else {
7160 if (ioc->hard_resets < -1)
7161 ioc->hard_resets++;
7162 }
7163
7164 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7165 ioc->ioc_reset_in_progress = 0;
7166 ioc->taskmgmt_quiesce_io = 0;
7167 ioc->taskmgmt_in_progress = 0;
7168 if (ioc->alt_ioc) {
7169 ioc->alt_ioc->ioc_reset_in_progress = 0;
7170 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7171 ioc->alt_ioc->taskmgmt_in_progress = 0;
7172 }
7173 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7174
7175 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7176 if (MptResetHandlers[cb_idx]) {
7177 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7178 if (ioc->alt_ioc)
7179 mpt_signal_reset(cb_idx,
7180 ioc->alt_ioc, MPT_IOC_POST_RESET);
7181 }
7182 }
7183
7184 dtmprintk(ioc,
7185 printk(MYIOC_s_DEBUG_FMT
7186 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7187 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7188 "SUCCESS" : "FAILED")));
7189
7190 return rc;
7191}
7192
7193#ifdef CONFIG_FUSION_LOGGING
7194static void
7195mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7196{
7197 char *ds = NULL;
7198 u32 evData0;
7199 int ii;
7200 u8 event;
7201 char *evStr = ioc->evStr;
7202
7203 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7204 evData0 = le32_to_cpu(pEventReply->Data[0]);
7205
7206 switch(event) {
7207 case MPI_EVENT_NONE:
7208 ds = "None";
7209 break;
7210 case MPI_EVENT_LOG_DATA:
7211 ds = "Log Data";
7212 break;
7213 case MPI_EVENT_STATE_CHANGE:
7214 ds = "State Change";
7215 break;
7216 case MPI_EVENT_UNIT_ATTENTION:
7217 ds = "Unit Attention";
7218 break;
7219 case MPI_EVENT_IOC_BUS_RESET:
7220 ds = "IOC Bus Reset";
7221 break;
7222 case MPI_EVENT_EXT_BUS_RESET:
7223 ds = "External Bus Reset";
7224 break;
7225 case MPI_EVENT_RESCAN:
7226 ds = "Bus Rescan Event";
7227 break;
7228 case MPI_EVENT_LINK_STATUS_CHANGE:
7229 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7230 ds = "Link Status(FAILURE) Change";
7231 else
7232 ds = "Link Status(ACTIVE) Change";
7233 break;
7234 case MPI_EVENT_LOOP_STATE_CHANGE:
7235 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7236 ds = "Loop State(LIP) Change";
7237 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7238 ds = "Loop State(LPE) Change";
7239 else
7240 ds = "Loop State(LPB) Change";
7241 break;
7242 case MPI_EVENT_LOGOUT:
7243 ds = "Logout";
7244 break;
7245 case MPI_EVENT_EVENT_CHANGE:
7246 if (evData0)
7247 ds = "Events ON";
7248 else
7249 ds = "Events OFF";
7250 break;
7251 case MPI_EVENT_INTEGRATED_RAID:
7252 {
7253 u8 ReasonCode = (u8)(evData0 >> 16);
7254 switch (ReasonCode) {
7255 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7256 ds = "Integrated Raid: Volume Created";
7257 break;
7258 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7259 ds = "Integrated Raid: Volume Deleted";
7260 break;
7261 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7262 ds = "Integrated Raid: Volume Settings Changed";
7263 break;
7264 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7265 ds = "Integrated Raid: Volume Status Changed";
7266 break;
7267 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7268 ds = "Integrated Raid: Volume Physdisk Changed";
7269 break;
7270 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7271 ds = "Integrated Raid: Physdisk Created";
7272 break;
7273 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7274 ds = "Integrated Raid: Physdisk Deleted";
7275 break;
7276 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7277 ds = "Integrated Raid: Physdisk Settings Changed";
7278 break;
7279 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7280 ds = "Integrated Raid: Physdisk Status Changed";
7281 break;
7282 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7283 ds = "Integrated Raid: Domain Validation Needed";
7284 break;
7285 case MPI_EVENT_RAID_RC_SMART_DATA :
7286 ds = "Integrated Raid; Smart Data";
7287 break;
7288 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7289 ds = "Integrated Raid: Replace Action Started";
7290 break;
7291 default:
7292 ds = "Integrated Raid";
7293 break;
7294 }
7295 break;
7296 }
7297 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7298 ds = "SCSI Device Status Change";
7299 break;
7300 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7301 {
7302 u8 id = (u8)(evData0);
7303 u8 channel = (u8)(evData0 >> 8);
7304 u8 ReasonCode = (u8)(evData0 >> 16);
7305 switch (ReasonCode) {
7306 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7307 snprintf(evStr, EVENT_DESCR_STR_SZ,
7308 "SAS Device Status Change: Added: "
7309 "id=%d channel=%d", id, channel);
7310 break;
7311 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7312 snprintf(evStr, EVENT_DESCR_STR_SZ,
7313 "SAS Device Status Change: Deleted: "
7314 "id=%d channel=%d", id, channel);
7315 break;
7316 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7317 snprintf(evStr, EVENT_DESCR_STR_SZ,
7318 "SAS Device Status Change: SMART Data: "
7319 "id=%d channel=%d", id, channel);
7320 break;
7321 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7322 snprintf(evStr, EVENT_DESCR_STR_SZ,
7323 "SAS Device Status Change: No Persistancy: "
7324 "id=%d channel=%d", id, channel);
7325 break;
7326 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7327 snprintf(evStr, EVENT_DESCR_STR_SZ,
7328 "SAS Device Status Change: Unsupported Device "
7329 "Discovered : id=%d channel=%d", id, channel);
7330 break;
7331 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7332 snprintf(evStr, EVENT_DESCR_STR_SZ,
7333 "SAS Device Status Change: Internal Device "
7334 "Reset : id=%d channel=%d", id, channel);
7335 break;
7336 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7337 snprintf(evStr, EVENT_DESCR_STR_SZ,
7338 "SAS Device Status Change: Internal Task "
7339 "Abort : id=%d channel=%d", id, channel);
7340 break;
7341 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7342 snprintf(evStr, EVENT_DESCR_STR_SZ,
7343 "SAS Device Status Change: Internal Abort "
7344 "Task Set : id=%d channel=%d", id, channel);
7345 break;
7346 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7347 snprintf(evStr, EVENT_DESCR_STR_SZ,
7348 "SAS Device Status Change: Internal Clear "
7349 "Task Set : id=%d channel=%d", id, channel);
7350 break;
7351 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7352 snprintf(evStr, EVENT_DESCR_STR_SZ,
7353 "SAS Device Status Change: Internal Query "
7354 "Task : id=%d channel=%d", id, channel);
7355 break;
7356 default:
7357 snprintf(evStr, EVENT_DESCR_STR_SZ,
7358 "SAS Device Status Change: Unknown: "
7359 "id=%d channel=%d", id, channel);
7360 break;
7361 }
7362 break;
7363 }
7364 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7365 ds = "Bus Timer Expired";
7366 break;
7367 case MPI_EVENT_QUEUE_FULL:
7368 {
7369 u16 curr_depth = (u16)(evData0 >> 16);
7370 u8 channel = (u8)(evData0 >> 8);
7371 u8 id = (u8)(evData0);
7372
7373 snprintf(evStr, EVENT_DESCR_STR_SZ,
7374 "Queue Full: channel=%d id=%d depth=%d",
7375 channel, id, curr_depth);
7376 break;
7377 }
7378 case MPI_EVENT_SAS_SES:
7379 ds = "SAS SES Event";
7380 break;
7381 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7382 ds = "Persistent Table Full";
7383 break;
7384 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7385 {
7386 u8 LinkRates = (u8)(evData0 >> 8);
7387 u8 PhyNumber = (u8)(evData0);
7388 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7389 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7390 switch (LinkRates) {
7391 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7392 snprintf(evStr, EVENT_DESCR_STR_SZ,
7393 "SAS PHY Link Status: Phy=%d:"
7394 " Rate Unknown",PhyNumber);
7395 break;
7396 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7397 snprintf(evStr, EVENT_DESCR_STR_SZ,
7398 "SAS PHY Link Status: Phy=%d:"
7399 " Phy Disabled",PhyNumber);
7400 break;
7401 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7402 snprintf(evStr, EVENT_DESCR_STR_SZ,
7403 "SAS PHY Link Status: Phy=%d:"
7404 " Failed Speed Nego",PhyNumber);
7405 break;
7406 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7407 snprintf(evStr, EVENT_DESCR_STR_SZ,
7408 "SAS PHY Link Status: Phy=%d:"
7409 " Sata OOB Completed",PhyNumber);
7410 break;
7411 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7412 snprintf(evStr, EVENT_DESCR_STR_SZ,
7413 "SAS PHY Link Status: Phy=%d:"
7414 " Rate 1.5 Gbps",PhyNumber);
7415 break;
7416 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7417 snprintf(evStr, EVENT_DESCR_STR_SZ,
7418 "SAS PHY Link Status: Phy=%d:"
7419 " Rate 3.0 Gbps", PhyNumber);
7420 break;
7421 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7422 snprintf(evStr, EVENT_DESCR_STR_SZ,
7423 "SAS PHY Link Status: Phy=%d:"
7424 " Rate 6.0 Gbps", PhyNumber);
7425 break;
7426 default:
7427 snprintf(evStr, EVENT_DESCR_STR_SZ,
7428 "SAS PHY Link Status: Phy=%d", PhyNumber);
7429 break;
7430 }
7431 break;
7432 }
7433 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7434 ds = "SAS Discovery Error";
7435 break;
7436 case MPI_EVENT_IR_RESYNC_UPDATE:
7437 {
7438 u8 resync_complete = (u8)(evData0 >> 16);
7439 snprintf(evStr, EVENT_DESCR_STR_SZ,
7440 "IR Resync Update: Complete = %d:",resync_complete);
7441 break;
7442 }
7443 case MPI_EVENT_IR2:
7444 {
7445 u8 id = (u8)(evData0);
7446 u8 channel = (u8)(evData0 >> 8);
7447 u8 phys_num = (u8)(evData0 >> 24);
7448 u8 ReasonCode = (u8)(evData0 >> 16);
7449
7450 switch (ReasonCode) {
7451 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7452 snprintf(evStr, EVENT_DESCR_STR_SZ,
7453 "IR2: LD State Changed: "
7454 "id=%d channel=%d phys_num=%d",
7455 id, channel, phys_num);
7456 break;
7457 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7458 snprintf(evStr, EVENT_DESCR_STR_SZ,
7459 "IR2: PD State Changed "
7460 "id=%d channel=%d phys_num=%d",
7461 id, channel, phys_num);
7462 break;
7463 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7464 snprintf(evStr, EVENT_DESCR_STR_SZ,
7465 "IR2: Bad Block Table Full: "
7466 "id=%d channel=%d phys_num=%d",
7467 id, channel, phys_num);
7468 break;
7469 case MPI_EVENT_IR2_RC_PD_INSERTED:
7470 snprintf(evStr, EVENT_DESCR_STR_SZ,
7471 "IR2: PD Inserted: "
7472 "id=%d channel=%d phys_num=%d",
7473 id, channel, phys_num);
7474 break;
7475 case MPI_EVENT_IR2_RC_PD_REMOVED:
7476 snprintf(evStr, EVENT_DESCR_STR_SZ,
7477 "IR2: PD Removed: "
7478 "id=%d channel=%d phys_num=%d",
7479 id, channel, phys_num);
7480 break;
7481 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7482 snprintf(evStr, EVENT_DESCR_STR_SZ,
7483 "IR2: Foreign CFG Detected: "
7484 "id=%d channel=%d phys_num=%d",
7485 id, channel, phys_num);
7486 break;
7487 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7488 snprintf(evStr, EVENT_DESCR_STR_SZ,
7489 "IR2: Rebuild Medium Error: "
7490 "id=%d channel=%d phys_num=%d",
7491 id, channel, phys_num);
7492 break;
7493 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7494 snprintf(evStr, EVENT_DESCR_STR_SZ,
7495 "IR2: Dual Port Added: "
7496 "id=%d channel=%d phys_num=%d",
7497 id, channel, phys_num);
7498 break;
7499 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7500 snprintf(evStr, EVENT_DESCR_STR_SZ,
7501 "IR2: Dual Port Removed: "
7502 "id=%d channel=%d phys_num=%d",
7503 id, channel, phys_num);
7504 break;
7505 default:
7506 ds = "IR2";
7507 break;
7508 }
7509 break;
7510 }
7511 case MPI_EVENT_SAS_DISCOVERY:
7512 {
7513 if (evData0)
7514 ds = "SAS Discovery: Start";
7515 else
7516 ds = "SAS Discovery: Stop";
7517 break;
7518 }
7519 case MPI_EVENT_LOG_ENTRY_ADDED:
7520 ds = "SAS Log Entry Added";
7521 break;
7522
7523 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7524 {
7525 u8 phy_num = (u8)(evData0);
7526 u8 port_num = (u8)(evData0 >> 8);
7527 u8 port_width = (u8)(evData0 >> 16);
7528 u8 primative = (u8)(evData0 >> 24);
7529 snprintf(evStr, EVENT_DESCR_STR_SZ,
7530 "SAS Broadcase Primative: phy=%d port=%d "
7531 "width=%d primative=0x%02x",
7532 phy_num, port_num, port_width, primative);
7533 break;
7534 }
7535
7536 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7537 {
7538 u8 reason = (u8)(evData0);
7539
7540 switch (reason) {
7541 case MPI_EVENT_SAS_INIT_RC_ADDED:
7542 ds = "SAS Initiator Status Change: Added";
7543 break;
7544 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7545 ds = "SAS Initiator Status Change: Deleted";
7546 break;
7547 default:
7548 ds = "SAS Initiator Status Change";
7549 break;
7550 }
7551 break;
7552 }
7553
7554 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7555 {
7556 u8 max_init = (u8)(evData0);
7557 u8 current_init = (u8)(evData0 >> 8);
7558
7559 snprintf(evStr, EVENT_DESCR_STR_SZ,
7560 "SAS Initiator Device Table Overflow: max initiators=%02d "
7561 "current initators=%02d",
7562 max_init, current_init);
7563 break;
7564 }
7565 case MPI_EVENT_SAS_SMP_ERROR:
7566 {
7567 u8 status = (u8)(evData0);
7568 u8 port_num = (u8)(evData0 >> 8);
7569 u8 result = (u8)(evData0 >> 16);
7570
7571 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7572 snprintf(evStr, EVENT_DESCR_STR_SZ,
7573 "SAS SMP Error: port=%d result=0x%02x",
7574 port_num, result);
7575 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7576 snprintf(evStr, EVENT_DESCR_STR_SZ,
7577 "SAS SMP Error: port=%d : CRC Error",
7578 port_num);
7579 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7580 snprintf(evStr, EVENT_DESCR_STR_SZ,
7581 "SAS SMP Error: port=%d : Timeout",
7582 port_num);
7583 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7584 snprintf(evStr, EVENT_DESCR_STR_SZ,
7585 "SAS SMP Error: port=%d : No Destination",
7586 port_num);
7587 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7588 snprintf(evStr, EVENT_DESCR_STR_SZ,
7589 "SAS SMP Error: port=%d : Bad Destination",
7590 port_num);
7591 else
7592 snprintf(evStr, EVENT_DESCR_STR_SZ,
7593 "SAS SMP Error: port=%d : status=0x%02x",
7594 port_num, status);
7595 break;
7596 }
7597
7598 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7599 {
7600 u8 reason = (u8)(evData0);
7601
7602 switch (reason) {
7603 case MPI_EVENT_SAS_EXP_RC_ADDED:
7604 ds = "Expander Status Change: Added";
7605 break;
7606 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7607 ds = "Expander Status Change: Deleted";
7608 break;
7609 default:
7610 ds = "Expander Status Change";
7611 break;
7612 }
7613 break;
7614 }
7615
7616 /*
7617 * MPT base "custom" events may be added here...
7618 */
7619 default:
7620 ds = "Unknown";
7621 break;
7622 }
7623 if (ds)
7624 strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
7625
7626
7627 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7628 "MPT event:(%02Xh) : %s\n",
7629 ioc->name, event, evStr));
7630
7631 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7632 ": Event data:\n"));
7633 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7634 devtverboseprintk(ioc, printk(" %08x",
7635 le32_to_cpu(pEventReply->Data[ii])));
7636 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7637}
7638#endif
7639/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7640/**
7641 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7642 * @ioc: Pointer to MPT_ADAPTER structure
7643 * @pEventReply: Pointer to EventNotification reply frame
7644 * @evHandlers: Pointer to integer, number of event handlers
7645 *
7646 * Routes a received EventNotificationReply to all currently registered
7647 * event handlers.
7648 * Returns sum of event handlers return values.
7649 */
7650static int
7651ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7652{
7653 u16 evDataLen;
7654 u32 evData0 = 0;
7655 int ii;
7656 u8 cb_idx;
7657 int r = 0;
7658 int handlers = 0;
7659 u8 event;
7660
7661 /*
7662 * Do platform normalization of values
7663 */
7664 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7665 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7666 if (evDataLen) {
7667 evData0 = le32_to_cpu(pEventReply->Data[0]);
7668 }
7669
7670#ifdef CONFIG_FUSION_LOGGING
7671 if (evDataLen)
7672 mpt_display_event_info(ioc, pEventReply);
7673#endif
7674
7675 /*
7676 * Do general / base driver event processing
7677 */
7678 switch(event) {
7679 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7680 if (evDataLen) {
7681 u8 evState = evData0 & 0xFF;
7682
7683 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7684
7685 /* Update EventState field in cached IocFacts */
7686 if (ioc->facts.Function) {
7687 ioc->facts.EventState = evState;
7688 }
7689 }
7690 break;
7691 case MPI_EVENT_INTEGRATED_RAID:
7692 mptbase_raid_process_event_data(ioc,
7693 (MpiEventDataRaid_t *)pEventReply->Data);
7694 break;
7695 default:
7696 break;
7697 }
7698
7699 /*
7700 * Should this event be logged? Events are written sequentially.
7701 * When buffer is full, start again at the top.
7702 */
7703 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7704 int idx;
7705
7706 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7707
7708 ioc->events[idx].event = event;
7709 ioc->events[idx].eventContext = ioc->eventContext;
7710
7711 for (ii = 0; ii < 2; ii++) {
7712 if (ii < evDataLen)
7713 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7714 else
7715 ioc->events[idx].data[ii] = 0;
7716 }
7717
7718 ioc->eventContext++;
7719 }
7720
7721
7722 /*
7723 * Call each currently registered protocol event handler.
7724 */
7725 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7726 if (MptEvHandlers[cb_idx]) {
7727 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7728 "Routing Event to event handler #%d\n",
7729 ioc->name, cb_idx));
7730 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7731 handlers++;
7732 }
7733 }
7734 /* FIXME? Examine results here? */
7735
7736 /*
7737 * If needed, send (a single) EventAck.
7738 */
7739 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7740 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7741 "EventAck required\n",ioc->name));
7742 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7743 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7744 ioc->name, ii));
7745 }
7746 }
7747
7748 *evHandlers = handlers;
7749 return r;
7750}
7751
7752/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7753/**
7754 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7755 * @ioc: Pointer to MPT_ADAPTER structure
7756 * @log_info: U32 LogInfo reply word from the IOC
7757 *
7758 * Refer to lsi/mpi_log_fc.h.
7759 */
7760static void
7761mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7762{
7763 char *desc = "unknown";
7764
7765 switch (log_info & 0xFF000000) {
7766 case MPI_IOCLOGINFO_FC_INIT_BASE:
7767 desc = "FCP Initiator";
7768 break;
7769 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7770 desc = "FCP Target";
7771 break;
7772 case MPI_IOCLOGINFO_FC_LAN_BASE:
7773 desc = "LAN";
7774 break;
7775 case MPI_IOCLOGINFO_FC_MSG_BASE:
7776 desc = "MPI Message Layer";
7777 break;
7778 case MPI_IOCLOGINFO_FC_LINK_BASE:
7779 desc = "FC Link";
7780 break;
7781 case MPI_IOCLOGINFO_FC_CTX_BASE:
7782 desc = "Context Manager";
7783 break;
7784 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7785 desc = "Invalid Field Offset";
7786 break;
7787 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7788 desc = "State Change Info";
7789 break;
7790 }
7791
7792 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7793 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7794}
7795
7796/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7797/**
7798 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7799 * @ioc: Pointer to MPT_ADAPTER structure
7800 * @log_info: U32 LogInfo word from the IOC
7801 *
7802 * Refer to lsi/sp_log.h.
7803 */
7804static void
7805mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7806{
7807 u32 info = log_info & 0x00FF0000;
7808 char *desc = "unknown";
7809
7810 switch (info) {
7811 case 0x00010000:
7812 desc = "bug! MID not found";
7813 break;
7814
7815 case 0x00020000:
7816 desc = "Parity Error";
7817 break;
7818
7819 case 0x00030000:
7820 desc = "ASYNC Outbound Overrun";
7821 break;
7822
7823 case 0x00040000:
7824 desc = "SYNC Offset Error";
7825 break;
7826
7827 case 0x00050000:
7828 desc = "BM Change";
7829 break;
7830
7831 case 0x00060000:
7832 desc = "Msg In Overflow";
7833 break;
7834
7835 case 0x00070000:
7836 desc = "DMA Error";
7837 break;
7838
7839 case 0x00080000:
7840 desc = "Outbound DMA Overrun";
7841 break;
7842
7843 case 0x00090000:
7844 desc = "Task Management";
7845 break;
7846
7847 case 0x000A0000:
7848 desc = "Device Problem";
7849 break;
7850
7851 case 0x000B0000:
7852 desc = "Invalid Phase Change";
7853 break;
7854
7855 case 0x000C0000:
7856 desc = "Untagged Table Size";
7857 break;
7858
7859 }
7860
7861 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7862}
7863
7864/* strings for sas loginfo */
7865 static char *originator_str[] = {
7866 "IOP", /* 00h */
7867 "PL", /* 01h */
7868 "IR" /* 02h */
7869 };
7870 static char *iop_code_str[] = {
7871 NULL, /* 00h */
7872 "Invalid SAS Address", /* 01h */
7873 NULL, /* 02h */
7874 "Invalid Page", /* 03h */
7875 "Diag Message Error", /* 04h */
7876 "Task Terminated", /* 05h */
7877 "Enclosure Management", /* 06h */
7878 "Target Mode" /* 07h */
7879 };
7880 static char *pl_code_str[] = {
7881 NULL, /* 00h */
7882 "Open Failure", /* 01h */
7883 "Invalid Scatter Gather List", /* 02h */
7884 "Wrong Relative Offset or Frame Length", /* 03h */
7885 "Frame Transfer Error", /* 04h */
7886 "Transmit Frame Connected Low", /* 05h */
7887 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7888 "SATA Read Log Receive Data Error", /* 07h */
7889 "SATA NCQ Fail All Commands After Error", /* 08h */
7890 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7891 "Receive Frame Invalid Message", /* 0Ah */
7892 "Receive Context Message Valid Error", /* 0Bh */
7893 "Receive Frame Current Frame Error", /* 0Ch */
7894 "SATA Link Down", /* 0Dh */
7895 "Discovery SATA Init W IOS", /* 0Eh */
7896 "Config Invalid Page", /* 0Fh */
7897 "Discovery SATA Init Timeout", /* 10h */
7898 "Reset", /* 11h */
7899 "Abort", /* 12h */
7900 "IO Not Yet Executed", /* 13h */
7901 "IO Executed", /* 14h */
7902 "Persistent Reservation Out Not Affiliation "
7903 "Owner", /* 15h */
7904 "Open Transmit DMA Abort", /* 16h */
7905 "IO Device Missing Delay Retry", /* 17h */
7906 "IO Cancelled Due to Receive Error", /* 18h */
7907 NULL, /* 19h */
7908 NULL, /* 1Ah */
7909 NULL, /* 1Bh */
7910 NULL, /* 1Ch */
7911 NULL, /* 1Dh */
7912 NULL, /* 1Eh */
7913 NULL, /* 1Fh */
7914 "Enclosure Management" /* 20h */
7915 };
7916 static char *ir_code_str[] = {
7917 "Raid Action Error", /* 00h */
7918 NULL, /* 00h */
7919 NULL, /* 01h */
7920 NULL, /* 02h */
7921 NULL, /* 03h */
7922 NULL, /* 04h */
7923 NULL, /* 05h */
7924 NULL, /* 06h */
7925 NULL /* 07h */
7926 };
7927 static char *raid_sub_code_str[] = {
7928 NULL, /* 00h */
7929 "Volume Creation Failed: Data Passed too "
7930 "Large", /* 01h */
7931 "Volume Creation Failed: Duplicate Volumes "
7932 "Attempted", /* 02h */
7933 "Volume Creation Failed: Max Number "
7934 "Supported Volumes Exceeded", /* 03h */
7935 "Volume Creation Failed: DMA Error", /* 04h */
7936 "Volume Creation Failed: Invalid Volume Type", /* 05h */
7937 "Volume Creation Failed: Error Reading "
7938 "MFG Page 4", /* 06h */
7939 "Volume Creation Failed: Creating Internal "
7940 "Structures", /* 07h */
7941 NULL, /* 08h */
7942 NULL, /* 09h */
7943 NULL, /* 0Ah */
7944 NULL, /* 0Bh */
7945 NULL, /* 0Ch */
7946 NULL, /* 0Dh */
7947 NULL, /* 0Eh */
7948 NULL, /* 0Fh */
7949 "Activation failed: Already Active Volume", /* 10h */
7950 "Activation failed: Unsupported Volume Type", /* 11h */
7951 "Activation failed: Too Many Active Volumes", /* 12h */
7952 "Activation failed: Volume ID in Use", /* 13h */
7953 "Activation failed: Reported Failure", /* 14h */
7954 "Activation failed: Importing a Volume", /* 15h */
7955 NULL, /* 16h */
7956 NULL, /* 17h */
7957 NULL, /* 18h */
7958 NULL, /* 19h */
7959 NULL, /* 1Ah */
7960 NULL, /* 1Bh */
7961 NULL, /* 1Ch */
7962 NULL, /* 1Dh */
7963 NULL, /* 1Eh */
7964 NULL, /* 1Fh */
7965 "Phys Disk failed: Too Many Phys Disks", /* 20h */
7966 "Phys Disk failed: Data Passed too Large", /* 21h */
7967 "Phys Disk failed: DMA Error", /* 22h */
7968 "Phys Disk failed: Invalid <channel:id>", /* 23h */
7969 "Phys Disk failed: Creating Phys Disk Config "
7970 "Page", /* 24h */
7971 NULL, /* 25h */
7972 NULL, /* 26h */
7973 NULL, /* 27h */
7974 NULL, /* 28h */
7975 NULL, /* 29h */
7976 NULL, /* 2Ah */
7977 NULL, /* 2Bh */
7978 NULL, /* 2Ch */
7979 NULL, /* 2Dh */
7980 NULL, /* 2Eh */
7981 NULL, /* 2Fh */
7982 "Compatibility Error: IR Disabled", /* 30h */
7983 "Compatibility Error: Inquiry Command Failed", /* 31h */
7984 "Compatibility Error: Device not Direct Access "
7985 "Device ", /* 32h */
7986 "Compatibility Error: Removable Device Found", /* 33h */
7987 "Compatibility Error: Device SCSI Version not "
7988 "2 or Higher", /* 34h */
7989 "Compatibility Error: SATA Device, 48 BIT LBA "
7990 "not Supported", /* 35h */
7991 "Compatibility Error: Device doesn't have "
7992 "512 Byte Block Sizes", /* 36h */
7993 "Compatibility Error: Volume Type Check Failed", /* 37h */
7994 "Compatibility Error: Volume Type is "
7995 "Unsupported by FW", /* 38h */
7996 "Compatibility Error: Disk Drive too Small for "
7997 "use in Volume", /* 39h */
7998 "Compatibility Error: Phys Disk for Create "
7999 "Volume not Found", /* 3Ah */
8000 "Compatibility Error: Too Many or too Few "
8001 "Disks for Volume Type", /* 3Bh */
8002 "Compatibility Error: Disk stripe Sizes "
8003 "Must be 64KB", /* 3Ch */
8004 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8005 };
8006
8007/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8008/**
8009 * mpt_sas_log_info - Log information returned from SAS IOC.
8010 * @ioc: Pointer to MPT_ADAPTER structure
8011 * @log_info: U32 LogInfo reply word from the IOC
8012 * @cb_idx: callback function's handle
8013 *
8014 * Refer to lsi/mpi_log_sas.h.
8015 **/
8016static void
8017mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8018{
8019union loginfo_type {
8020 u32 loginfo;
8021 struct {
8022 u32 subcode:16;
8023 u32 code:8;
8024 u32 originator:4;
8025 u32 bus_type:4;
8026 }dw;
8027};
8028 union loginfo_type sas_loginfo;
8029 char *originator_desc = NULL;
8030 char *code_desc = NULL;
8031 char *sub_code_desc = NULL;
8032
8033 sas_loginfo.loginfo = log_info;
8034 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8035 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8036 return;
8037
8038 originator_desc = originator_str[sas_loginfo.dw.originator];
8039
8040 switch (sas_loginfo.dw.originator) {
8041
8042 case 0: /* IOP */
8043 if (sas_loginfo.dw.code <
8044 ARRAY_SIZE(iop_code_str))
8045 code_desc = iop_code_str[sas_loginfo.dw.code];
8046 break;
8047 case 1: /* PL */
8048 if (sas_loginfo.dw.code <
8049 ARRAY_SIZE(pl_code_str))
8050 code_desc = pl_code_str[sas_loginfo.dw.code];
8051 break;
8052 case 2: /* IR */
8053 if (sas_loginfo.dw.code >=
8054 ARRAY_SIZE(ir_code_str))
8055 break;
8056 code_desc = ir_code_str[sas_loginfo.dw.code];
8057 if (sas_loginfo.dw.subcode >=
8058 ARRAY_SIZE(raid_sub_code_str))
8059 break;
8060 if (sas_loginfo.dw.code == 0)
8061 sub_code_desc =
8062 raid_sub_code_str[sas_loginfo.dw.subcode];
8063 break;
8064 default:
8065 return;
8066 }
8067
8068 if (sub_code_desc != NULL)
8069 printk(MYIOC_s_INFO_FMT
8070 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8071 " SubCode={%s} cb_idx %s\n",
8072 ioc->name, log_info, originator_desc, code_desc,
8073 sub_code_desc, MptCallbacksName[cb_idx]);
8074 else if (code_desc != NULL)
8075 printk(MYIOC_s_INFO_FMT
8076 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8077 " SubCode(0x%04x) cb_idx %s\n",
8078 ioc->name, log_info, originator_desc, code_desc,
8079 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8080 else
8081 printk(MYIOC_s_INFO_FMT
8082 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8083 " SubCode(0x%04x) cb_idx %s\n",
8084 ioc->name, log_info, originator_desc,
8085 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8086 MptCallbacksName[cb_idx]);
8087}
8088
8089/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8090/**
8091 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8092 * @ioc: Pointer to MPT_ADAPTER structure
8093 * @ioc_status: U32 IOCStatus word from IOC
8094 * @mf: Pointer to MPT request frame
8095 *
8096 * Refer to lsi/mpi.h.
8097 **/
8098static void
8099mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8100{
8101 Config_t *pReq = (Config_t *)mf;
8102 char extend_desc[EVENT_DESCR_STR_SZ];
8103 char *desc = NULL;
8104 u32 form;
8105 u8 page_type;
8106
8107 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8108 page_type = pReq->ExtPageType;
8109 else
8110 page_type = pReq->Header.PageType;
8111
8112 /*
8113 * ignore invalid page messages for GET_NEXT_HANDLE
8114 */
8115 form = le32_to_cpu(pReq->PageAddress);
8116 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8117 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8118 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8119 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8120 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8121 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8122 return;
8123 }
8124 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8125 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8126 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8127 return;
8128 }
8129
8130 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8131 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8132 page_type, pReq->Header.PageNumber, pReq->Action, form);
8133
8134 switch (ioc_status) {
8135
8136 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8137 desc = "Config Page Invalid Action";
8138 break;
8139
8140 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8141 desc = "Config Page Invalid Type";
8142 break;
8143
8144 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8145 desc = "Config Page Invalid Page";
8146 break;
8147
8148 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8149 desc = "Config Page Invalid Data";
8150 break;
8151
8152 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8153 desc = "Config Page No Defaults";
8154 break;
8155
8156 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8157 desc = "Config Page Can't Commit";
8158 break;
8159 }
8160
8161 if (!desc)
8162 return;
8163
8164 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8165 ioc->name, ioc_status, desc, extend_desc));
8166}
8167
8168/**
8169 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8170 * @ioc: Pointer to MPT_ADAPTER structure
8171 * @ioc_status: U32 IOCStatus word from IOC
8172 * @mf: Pointer to MPT request frame
8173 *
8174 * Refer to lsi/mpi.h.
8175 **/
8176static void
8177mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8178{
8179 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8180 char *desc = NULL;
8181
8182 switch (status) {
8183
8184/****************************************************************************/
8185/* Common IOCStatus values for all replies */
8186/****************************************************************************/
8187
8188 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8189 desc = "Invalid Function";
8190 break;
8191
8192 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8193 desc = "Busy";
8194 break;
8195
8196 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8197 desc = "Invalid SGL";
8198 break;
8199
8200 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8201 desc = "Internal Error";
8202 break;
8203
8204 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8205 desc = "Reserved";
8206 break;
8207
8208 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8209 desc = "Insufficient Resources";
8210 break;
8211
8212 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8213 desc = "Invalid Field";
8214 break;
8215
8216 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8217 desc = "Invalid State";
8218 break;
8219
8220/****************************************************************************/
8221/* Config IOCStatus values */
8222/****************************************************************************/
8223
8224 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8225 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8226 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8227 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8228 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8229 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8230 mpt_iocstatus_info_config(ioc, status, mf);
8231 break;
8232
8233/****************************************************************************/
8234/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8235/* */
8236/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8237/* */
8238/****************************************************************************/
8239
8240 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8241 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8242 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8243 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8244 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8245 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8246 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8247 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8248 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8249 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8250 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8251 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8252 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8253 break;
8254
8255/****************************************************************************/
8256/* SCSI Target values */
8257/****************************************************************************/
8258
8259 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8260 desc = "Target: Priority IO";
8261 break;
8262
8263 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8264 desc = "Target: Invalid Port";
8265 break;
8266
8267 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8268 desc = "Target Invalid IO Index:";
8269 break;
8270
8271 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8272 desc = "Target: Aborted";
8273 break;
8274
8275 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8276 desc = "Target: No Conn Retryable";
8277 break;
8278
8279 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8280 desc = "Target: No Connection";
8281 break;
8282
8283 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8284 desc = "Target: Transfer Count Mismatch";
8285 break;
8286
8287 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8288 desc = "Target: STS Data not Sent";
8289 break;
8290
8291 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8292 desc = "Target: Data Offset Error";
8293 break;
8294
8295 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8296 desc = "Target: Too Much Write Data";
8297 break;
8298
8299 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8300 desc = "Target: IU Too Short";
8301 break;
8302
8303 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8304 desc = "Target: ACK NAK Timeout";
8305 break;
8306
8307 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8308 desc = "Target: Nak Received";
8309 break;
8310
8311/****************************************************************************/
8312/* Fibre Channel Direct Access values */
8313/****************************************************************************/
8314
8315 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8316 desc = "FC: Aborted";
8317 break;
8318
8319 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8320 desc = "FC: RX ID Invalid";
8321 break;
8322
8323 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8324 desc = "FC: DID Invalid";
8325 break;
8326
8327 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8328 desc = "FC: Node Logged Out";
8329 break;
8330
8331 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8332 desc = "FC: Exchange Canceled";
8333 break;
8334
8335/****************************************************************************/
8336/* LAN values */
8337/****************************************************************************/
8338
8339 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8340 desc = "LAN: Device not Found";
8341 break;
8342
8343 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8344 desc = "LAN: Device Failure";
8345 break;
8346
8347 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8348 desc = "LAN: Transmit Error";
8349 break;
8350
8351 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8352 desc = "LAN: Transmit Aborted";
8353 break;
8354
8355 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8356 desc = "LAN: Receive Error";
8357 break;
8358
8359 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8360 desc = "LAN: Receive Aborted";
8361 break;
8362
8363 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8364 desc = "LAN: Partial Packet";
8365 break;
8366
8367 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8368 desc = "LAN: Canceled";
8369 break;
8370
8371/****************************************************************************/
8372/* Serial Attached SCSI values */
8373/****************************************************************************/
8374
8375 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8376 desc = "SAS: SMP Request Failed";
8377 break;
8378
8379 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8380 desc = "SAS: SMP Data Overrun";
8381 break;
8382
8383 default:
8384 desc = "Others";
8385 break;
8386 }
8387
8388 if (!desc)
8389 return;
8390
8391 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8392 ioc->name, status, desc));
8393}
8394
8395/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8396EXPORT_SYMBOL(mpt_attach);
8397EXPORT_SYMBOL(mpt_detach);
8398#ifdef CONFIG_PM
8399EXPORT_SYMBOL(mpt_resume);
8400EXPORT_SYMBOL(mpt_suspend);
8401#endif
8402EXPORT_SYMBOL(ioc_list);
8403EXPORT_SYMBOL(mpt_register);
8404EXPORT_SYMBOL(mpt_deregister);
8405EXPORT_SYMBOL(mpt_event_register);
8406EXPORT_SYMBOL(mpt_event_deregister);
8407EXPORT_SYMBOL(mpt_reset_register);
8408EXPORT_SYMBOL(mpt_reset_deregister);
8409EXPORT_SYMBOL(mpt_device_driver_register);
8410EXPORT_SYMBOL(mpt_device_driver_deregister);
8411EXPORT_SYMBOL(mpt_get_msg_frame);
8412EXPORT_SYMBOL(mpt_put_msg_frame);
8413EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8414EXPORT_SYMBOL(mpt_free_msg_frame);
8415EXPORT_SYMBOL(mpt_send_handshake_request);
8416EXPORT_SYMBOL(mpt_verify_adapter);
8417EXPORT_SYMBOL(mpt_GetIocState);
8418EXPORT_SYMBOL(mpt_print_ioc_summary);
8419EXPORT_SYMBOL(mpt_HardResetHandler);
8420EXPORT_SYMBOL(mpt_config);
8421EXPORT_SYMBOL(mpt_findImVolumes);
8422EXPORT_SYMBOL(mpt_alloc_fw_memory);
8423EXPORT_SYMBOL(mpt_free_fw_memory);
8424EXPORT_SYMBOL(mptbase_sas_persist_operation);
8425EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8426
8427/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8428/**
8429 * fusion_init - Fusion MPT base driver initialization routine.
8430 *
8431 * Returns 0 for success, non-zero for failure.
8432 */
8433static int __init
8434fusion_init(void)
8435{
8436 u8 cb_idx;
8437
8438 show_mptmod_ver(my_NAME, my_VERSION);
8439 printk(KERN_INFO COPYRIGHT "\n");
8440
8441 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8442 MptCallbacks[cb_idx] = NULL;
8443 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8444 MptEvHandlers[cb_idx] = NULL;
8445 MptResetHandlers[cb_idx] = NULL;
8446 }
8447
8448 /* Register ourselves (mptbase) in order to facilitate
8449 * EventNotification handling.
8450 */
8451 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8452 "mptbase_reply");
8453
8454 /* Register for hard reset handling callbacks.
8455 */
8456 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8457
8458#ifdef CONFIG_PROC_FS
8459 (void) procmpt_create();
8460#endif
8461 return 0;
8462}
8463
8464/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8465/**
8466 * fusion_exit - Perform driver unload cleanup.
8467 *
8468 * This routine frees all resources associated with each MPT adapter
8469 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8470 */
8471static void __exit
8472fusion_exit(void)
8473{
8474
8475 mpt_reset_deregister(mpt_base_index);
8476
8477#ifdef CONFIG_PROC_FS
8478 procmpt_destroy();
8479#endif
8480}
8481
8482module_init(fusion_init);
8483module_exit(fusion_exit);