Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * sleep.c - ACPI sleep support.
4 *
5 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
6 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
7 * Copyright (c) 2000-2003 Patrick Mochel
8 * Copyright (c) 2003 Open Source Development Lab
9 */
10
11#define pr_fmt(fmt) "ACPI: PM: " fmt
12
13#include <linux/delay.h>
14#include <linux/irq.h>
15#include <linux/dmi.h>
16#include <linux/device.h>
17#include <linux/interrupt.h>
18#include <linux/suspend.h>
19#include <linux/reboot.h>
20#include <linux/acpi.h>
21#include <linux/module.h>
22#include <linux/syscore_ops.h>
23#include <asm/io.h>
24#include <trace/events/power.h>
25
26#include "internal.h"
27#include "sleep.h"
28
29/*
30 * Some HW-full platforms do not have _S5, so they may need
31 * to leverage efi power off for a shutdown.
32 */
33bool acpi_no_s5;
34static u8 sleep_states[ACPI_S_STATE_COUNT];
35
36static void acpi_sleep_tts_switch(u32 acpi_state)
37{
38 acpi_status status;
39
40 status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
41 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
42 /*
43 * OS can't evaluate the _TTS object correctly. Some warning
44 * message will be printed. But it won't break anything.
45 */
46 pr_notice("Failure in evaluating _TTS object\n");
47 }
48}
49
50static int tts_notify_reboot(struct notifier_block *this,
51 unsigned long code, void *x)
52{
53 acpi_sleep_tts_switch(ACPI_STATE_S5);
54 return NOTIFY_DONE;
55}
56
57static struct notifier_block tts_notifier = {
58 .notifier_call = tts_notify_reboot,
59 .next = NULL,
60 .priority = 0,
61};
62
63#ifndef acpi_skip_set_wakeup_address
64#define acpi_skip_set_wakeup_address() false
65#endif
66
67static int acpi_sleep_prepare(u32 acpi_state)
68{
69#ifdef CONFIG_ACPI_SLEEP
70 unsigned long acpi_wakeup_address;
71
72 /* do we have a wakeup address for S2 and S3? */
73 if (acpi_state == ACPI_STATE_S3 && !acpi_skip_set_wakeup_address()) {
74 acpi_wakeup_address = acpi_get_wakeup_address();
75 if (!acpi_wakeup_address)
76 return -EFAULT;
77 acpi_set_waking_vector(acpi_wakeup_address);
78
79 }
80#endif
81 pr_info("Preparing to enter system sleep state S%d\n", acpi_state);
82 acpi_enable_wakeup_devices(acpi_state);
83 acpi_enter_sleep_state_prep(acpi_state);
84 return 0;
85}
86
87bool acpi_sleep_state_supported(u8 sleep_state)
88{
89 acpi_status status;
90 u8 type_a, type_b;
91
92 status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
93 return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
94 || (acpi_gbl_FADT.sleep_control.address
95 && acpi_gbl_FADT.sleep_status.address));
96}
97
98#ifdef CONFIG_ACPI_SLEEP
99static u32 acpi_target_sleep_state = ACPI_STATE_S0;
100
101u32 acpi_target_system_state(void)
102{
103 return acpi_target_sleep_state;
104}
105EXPORT_SYMBOL_GPL(acpi_target_system_state);
106
107static bool pwr_btn_event_pending;
108
109/*
110 * The ACPI specification wants us to save NVS memory regions during hibernation
111 * and to restore them during the subsequent resume. Windows does that also for
112 * suspend to RAM. However, it is known that this mechanism does not work on
113 * all machines, so we allow the user to disable it with the help of the
114 * 'acpi_sleep=nonvs' kernel command line option.
115 */
116static bool nvs_nosave;
117
118void __init acpi_nvs_nosave(void)
119{
120 nvs_nosave = true;
121}
122
123/*
124 * The ACPI specification wants us to save NVS memory regions during hibernation
125 * but says nothing about saving NVS during S3. Not all versions of Windows
126 * save NVS on S3 suspend either, and it is clear that not all systems need
127 * NVS to be saved at S3 time. To improve suspend/resume time, allow the
128 * user to disable saving NVS on S3 if their system does not require it, but
129 * continue to save/restore NVS for S4 as specified.
130 */
131static bool nvs_nosave_s3;
132
133void __init acpi_nvs_nosave_s3(void)
134{
135 nvs_nosave_s3 = true;
136}
137
138static int __init init_nvs_save_s3(const struct dmi_system_id *d)
139{
140 nvs_nosave_s3 = false;
141 return 0;
142}
143
144/*
145 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
146 * user to request that behavior by using the 'acpi_old_suspend_ordering'
147 * kernel command line option that causes the following variable to be set.
148 */
149static bool old_suspend_ordering;
150
151void __init acpi_old_suspend_ordering(void)
152{
153 old_suspend_ordering = true;
154}
155
156static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
157{
158 acpi_old_suspend_ordering();
159 return 0;
160}
161
162static int __init init_nvs_nosave(const struct dmi_system_id *d)
163{
164 acpi_nvs_nosave();
165 return 0;
166}
167
168bool acpi_sleep_default_s3;
169
170static int __init init_default_s3(const struct dmi_system_id *d)
171{
172 acpi_sleep_default_s3 = true;
173 return 0;
174}
175
176static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
177 {
178 .callback = init_old_suspend_ordering,
179 .ident = "Abit KN9 (nForce4 variant)",
180 .matches = {
181 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
182 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
183 },
184 },
185 {
186 .callback = init_old_suspend_ordering,
187 .ident = "HP xw4600 Workstation",
188 .matches = {
189 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
190 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
191 },
192 },
193 {
194 .callback = init_old_suspend_ordering,
195 .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
196 .matches = {
197 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
198 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
199 },
200 },
201 {
202 .callback = init_old_suspend_ordering,
203 .ident = "Panasonic CF51-2L",
204 .matches = {
205 DMI_MATCH(DMI_BOARD_VENDOR,
206 "Matsushita Electric Industrial Co.,Ltd."),
207 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
208 },
209 },
210 {
211 .callback = init_nvs_nosave,
212 .ident = "Sony Vaio VGN-FW41E_H",
213 .matches = {
214 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
215 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
216 },
217 },
218 {
219 .callback = init_nvs_nosave,
220 .ident = "Sony Vaio VGN-FW21E",
221 .matches = {
222 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
223 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
224 },
225 },
226 {
227 .callback = init_nvs_nosave,
228 .ident = "Sony Vaio VGN-FW21M",
229 .matches = {
230 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
231 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
232 },
233 },
234 {
235 .callback = init_nvs_nosave,
236 .ident = "Sony Vaio VPCEB17FX",
237 .matches = {
238 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
239 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
240 },
241 },
242 {
243 .callback = init_nvs_nosave,
244 .ident = "Sony Vaio VGN-SR11M",
245 .matches = {
246 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
247 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
248 },
249 },
250 {
251 .callback = init_nvs_nosave,
252 .ident = "Everex StepNote Series",
253 .matches = {
254 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
255 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
256 },
257 },
258 {
259 .callback = init_nvs_nosave,
260 .ident = "Sony Vaio VPCEB1Z1E",
261 .matches = {
262 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
263 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
264 },
265 },
266 {
267 .callback = init_nvs_nosave,
268 .ident = "Sony Vaio VGN-NW130D",
269 .matches = {
270 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
271 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
272 },
273 },
274 {
275 .callback = init_nvs_nosave,
276 .ident = "Sony Vaio VPCCW29FX",
277 .matches = {
278 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
279 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
280 },
281 },
282 {
283 .callback = init_nvs_nosave,
284 .ident = "Averatec AV1020-ED2",
285 .matches = {
286 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
287 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
288 },
289 },
290 {
291 .callback = init_old_suspend_ordering,
292 .ident = "Asus A8N-SLI DELUXE",
293 .matches = {
294 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
295 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
296 },
297 },
298 {
299 .callback = init_old_suspend_ordering,
300 .ident = "Asus A8N-SLI Premium",
301 .matches = {
302 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
303 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
304 },
305 },
306 {
307 .callback = init_nvs_nosave,
308 .ident = "Sony Vaio VGN-SR26GN_P",
309 .matches = {
310 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
311 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
312 },
313 },
314 {
315 .callback = init_nvs_nosave,
316 .ident = "Sony Vaio VPCEB1S1E",
317 .matches = {
318 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
319 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
320 },
321 },
322 {
323 .callback = init_nvs_nosave,
324 .ident = "Sony Vaio VGN-FW520F",
325 .matches = {
326 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
327 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
328 },
329 },
330 {
331 .callback = init_nvs_nosave,
332 .ident = "Asus K54C",
333 .matches = {
334 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
335 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
336 },
337 },
338 {
339 .callback = init_nvs_nosave,
340 .ident = "Asus K54HR",
341 .matches = {
342 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
343 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
344 },
345 },
346 {
347 .callback = init_nvs_save_s3,
348 .ident = "Asus 1025C",
349 .matches = {
350 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
351 DMI_MATCH(DMI_PRODUCT_NAME, "1025C"),
352 },
353 },
354 /*
355 * The ASUS ROG M16 from 2023 has many events which wake it from s2idle
356 * resulting in excessive battery drain and risk of laptop overheating,
357 * these events can be caused by the MMC or y AniMe display if installed.
358 * The match is valid for all of the GU604V<x> range.
359 */
360 {
361 .callback = init_default_s3,
362 .ident = "ASUS ROG Zephyrus M16 (2023)",
363 .matches = {
364 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
365 DMI_MATCH(DMI_PRODUCT_NAME, "ROG Zephyrus M16 GU604V"),
366 },
367 },
368 /*
369 * https://bugzilla.kernel.org/show_bug.cgi?id=189431
370 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory
371 * saving during S3.
372 */
373 {
374 .callback = init_nvs_save_s3,
375 .ident = "Lenovo G50-45",
376 .matches = {
377 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
378 DMI_MATCH(DMI_PRODUCT_NAME, "80E3"),
379 },
380 },
381 {
382 .callback = init_nvs_save_s3,
383 .ident = "Lenovo G40-45",
384 .matches = {
385 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
386 DMI_MATCH(DMI_PRODUCT_NAME, "80E1"),
387 },
388 },
389 /*
390 * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using
391 * the Low Power S0 Idle firmware interface (see
392 * https://bugzilla.kernel.org/show_bug.cgi?id=199057).
393 */
394 {
395 .callback = init_default_s3,
396 .ident = "ThinkPad X1 Tablet(2016)",
397 .matches = {
398 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
399 DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"),
400 },
401 },
402 {},
403};
404
405static bool ignore_blacklist;
406
407void __init acpi_sleep_no_blacklist(void)
408{
409 ignore_blacklist = true;
410}
411
412static void __init acpi_sleep_dmi_check(void)
413{
414 if (ignore_blacklist)
415 return;
416
417 if (dmi_get_bios_year() >= 2012)
418 acpi_nvs_nosave_s3();
419
420 dmi_check_system(acpisleep_dmi_table);
421}
422
423/**
424 * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
425 */
426static int acpi_pm_freeze(void)
427{
428 acpi_disable_all_gpes();
429 acpi_os_wait_events_complete();
430 acpi_ec_block_transactions();
431 return 0;
432}
433
434/**
435 * acpi_pm_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
436 */
437static int acpi_pm_pre_suspend(void)
438{
439 acpi_pm_freeze();
440 return suspend_nvs_save();
441}
442
443/**
444 * __acpi_pm_prepare - Prepare the platform to enter the target state.
445 *
446 * If necessary, set the firmware waking vector and do arch-specific
447 * nastiness to get the wakeup code to the waking vector.
448 */
449static int __acpi_pm_prepare(void)
450{
451 int error = acpi_sleep_prepare(acpi_target_sleep_state);
452 if (error)
453 acpi_target_sleep_state = ACPI_STATE_S0;
454
455 return error;
456}
457
458/**
459 * acpi_pm_prepare - Prepare the platform to enter the target sleep
460 * state and disable the GPEs.
461 */
462static int acpi_pm_prepare(void)
463{
464 int error = __acpi_pm_prepare();
465 if (!error)
466 error = acpi_pm_pre_suspend();
467
468 return error;
469}
470
471/**
472 * acpi_pm_finish - Instruct the platform to leave a sleep state.
473 *
474 * This is called after we wake back up (or if entering the sleep state
475 * failed).
476 */
477static void acpi_pm_finish(void)
478{
479 struct acpi_device *pwr_btn_adev;
480 u32 acpi_state = acpi_target_sleep_state;
481
482 acpi_ec_unblock_transactions();
483 suspend_nvs_free();
484
485 if (acpi_state == ACPI_STATE_S0)
486 return;
487
488 pr_info("Waking up from system sleep state S%d\n", acpi_state);
489 acpi_disable_wakeup_devices(acpi_state);
490 acpi_leave_sleep_state(acpi_state);
491
492 /* reset firmware waking vector */
493 acpi_set_waking_vector(0);
494
495 acpi_target_sleep_state = ACPI_STATE_S0;
496
497 acpi_resume_power_resources();
498
499 /* If we were woken with the fixed power button, provide a small
500 * hint to userspace in the form of a wakeup event on the fixed power
501 * button device (if it can be found).
502 *
503 * We delay the event generation til now, as the PM layer requires
504 * timekeeping to be running before we generate events. */
505 if (!pwr_btn_event_pending)
506 return;
507
508 pwr_btn_event_pending = false;
509 pwr_btn_adev = acpi_dev_get_first_match_dev(ACPI_BUTTON_HID_POWERF,
510 NULL, -1);
511 if (pwr_btn_adev) {
512 pm_wakeup_event(&pwr_btn_adev->dev, 0);
513 acpi_dev_put(pwr_btn_adev);
514 }
515}
516
517/**
518 * acpi_pm_start - Start system PM transition.
519 * @acpi_state: The target ACPI power state to transition to.
520 */
521static void acpi_pm_start(u32 acpi_state)
522{
523 acpi_target_sleep_state = acpi_state;
524 acpi_sleep_tts_switch(acpi_target_sleep_state);
525 acpi_scan_lock_acquire();
526}
527
528/**
529 * acpi_pm_end - Finish up system PM transition.
530 */
531static void acpi_pm_end(void)
532{
533 acpi_turn_off_unused_power_resources();
534 acpi_scan_lock_release();
535 /*
536 * This is necessary in case acpi_pm_finish() is not called during a
537 * failing transition to a sleep state.
538 */
539 acpi_target_sleep_state = ACPI_STATE_S0;
540 acpi_sleep_tts_switch(acpi_target_sleep_state);
541}
542#else /* !CONFIG_ACPI_SLEEP */
543#define sleep_no_lps0 (1)
544#define acpi_target_sleep_state ACPI_STATE_S0
545#define acpi_sleep_default_s3 (1)
546static inline void acpi_sleep_dmi_check(void) {}
547#endif /* CONFIG_ACPI_SLEEP */
548
549#ifdef CONFIG_SUSPEND
550static u32 acpi_suspend_states[] = {
551 [PM_SUSPEND_ON] = ACPI_STATE_S0,
552 [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
553 [PM_SUSPEND_MEM] = ACPI_STATE_S3,
554 [PM_SUSPEND_MAX] = ACPI_STATE_S5
555};
556
557/**
558 * acpi_suspend_begin - Set the target system sleep state to the state
559 * associated with given @pm_state, if supported.
560 * @pm_state: The target system power management state.
561 */
562static int acpi_suspend_begin(suspend_state_t pm_state)
563{
564 u32 acpi_state = acpi_suspend_states[pm_state];
565 int error;
566
567 error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
568 if (error)
569 return error;
570
571 if (!sleep_states[acpi_state]) {
572 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
573 return -ENOSYS;
574 }
575 if (acpi_state > ACPI_STATE_S1)
576 pm_set_suspend_via_firmware();
577
578 acpi_pm_start(acpi_state);
579 return 0;
580}
581
582/**
583 * acpi_suspend_enter - Actually enter a sleep state.
584 * @pm_state: ignored
585 *
586 * Flush caches and go to sleep. For STR we have to call arch-specific
587 * assembly, which in turn call acpi_enter_sleep_state().
588 * It's unfortunate, but it works. Please fix if you're feeling frisky.
589 */
590static int acpi_suspend_enter(suspend_state_t pm_state)
591{
592 acpi_status status = AE_OK;
593 u32 acpi_state = acpi_target_sleep_state;
594 int error;
595
596 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true);
597 switch (acpi_state) {
598 case ACPI_STATE_S1:
599 barrier();
600 status = acpi_enter_sleep_state(acpi_state);
601 break;
602
603 case ACPI_STATE_S3:
604 if (!acpi_suspend_lowlevel)
605 return -ENOSYS;
606 error = acpi_suspend_lowlevel();
607 if (error)
608 return error;
609 pr_info("Low-level resume complete\n");
610 pm_set_resume_via_firmware();
611 break;
612 }
613 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false);
614
615 /* This violates the spec but is required for bug compatibility. */
616 acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
617
618 /* Reprogram control registers */
619 acpi_leave_sleep_state_prep(acpi_state);
620
621 /* ACPI 3.0 specs (P62) says that it's the responsibility
622 * of the OSPM to clear the status bit [ implying that the
623 * POWER_BUTTON event should not reach userspace ]
624 *
625 * However, we do generate a small hint for userspace in the form of
626 * a wakeup event. We flag this condition for now and generate the
627 * event later, as we're currently too early in resume to be able to
628 * generate wakeup events.
629 */
630 if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
631 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
632
633 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
634
635 if (pwr_btn_status & ACPI_EVENT_FLAG_STATUS_SET) {
636 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
637 /* Flag for later */
638 pwr_btn_event_pending = true;
639 }
640 }
641
642 /*
643 * Disable all GPE and clear their status bits before interrupts are
644 * enabled. Some GPEs (like wakeup GPEs) have no handlers and this can
645 * prevent them from producing spurious interrups.
646 *
647 * acpi_leave_sleep_state() will reenable specific GPEs later.
648 *
649 * Because this code runs on one CPU with disabled interrupts (all of
650 * the other CPUs are offline at this time), it need not acquire any
651 * sleeping locks which may trigger an implicit preemption point even
652 * if there is no contention, so avoid doing that by using a low-level
653 * library routine here.
654 */
655 acpi_hw_disable_all_gpes();
656 /* Allow EC transactions to happen. */
657 acpi_ec_unblock_transactions();
658
659 suspend_nvs_restore();
660
661 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
662}
663
664static int acpi_suspend_state_valid(suspend_state_t pm_state)
665{
666 u32 acpi_state;
667
668 switch (pm_state) {
669 case PM_SUSPEND_ON:
670 case PM_SUSPEND_STANDBY:
671 case PM_SUSPEND_MEM:
672 acpi_state = acpi_suspend_states[pm_state];
673
674 return sleep_states[acpi_state];
675 default:
676 return 0;
677 }
678}
679
680static const struct platform_suspend_ops acpi_suspend_ops = {
681 .valid = acpi_suspend_state_valid,
682 .begin = acpi_suspend_begin,
683 .prepare_late = acpi_pm_prepare,
684 .enter = acpi_suspend_enter,
685 .wake = acpi_pm_finish,
686 .end = acpi_pm_end,
687};
688
689/**
690 * acpi_suspend_begin_old - Set the target system sleep state to the
691 * state associated with given @pm_state, if supported, and
692 * execute the _PTS control method. This function is used if the
693 * pre-ACPI 2.0 suspend ordering has been requested.
694 * @pm_state: The target suspend state for the system.
695 */
696static int acpi_suspend_begin_old(suspend_state_t pm_state)
697{
698 int error = acpi_suspend_begin(pm_state);
699 if (!error)
700 error = __acpi_pm_prepare();
701
702 return error;
703}
704
705/*
706 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
707 * been requested.
708 */
709static const struct platform_suspend_ops acpi_suspend_ops_old = {
710 .valid = acpi_suspend_state_valid,
711 .begin = acpi_suspend_begin_old,
712 .prepare_late = acpi_pm_pre_suspend,
713 .enter = acpi_suspend_enter,
714 .wake = acpi_pm_finish,
715 .end = acpi_pm_end,
716 .recover = acpi_pm_finish,
717};
718
719static bool s2idle_wakeup;
720
721int acpi_s2idle_begin(void)
722{
723 acpi_scan_lock_acquire();
724 return 0;
725}
726
727int acpi_s2idle_prepare(void)
728{
729 if (acpi_sci_irq_valid()) {
730 int error;
731
732 error = enable_irq_wake(acpi_sci_irq);
733 if (error)
734 pr_warn("Warning: Failed to enable wakeup from IRQ %d: %d\n",
735 acpi_sci_irq, error);
736
737 acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE);
738 }
739
740 acpi_enable_wakeup_devices(ACPI_STATE_S0);
741
742 /* Change the configuration of GPEs to avoid spurious wakeup. */
743 acpi_enable_all_wakeup_gpes();
744 acpi_os_wait_events_complete();
745
746 s2idle_wakeup = true;
747 return 0;
748}
749
750bool acpi_s2idle_wake(void)
751{
752 if (!acpi_sci_irq_valid())
753 return pm_wakeup_pending();
754
755 while (pm_wakeup_pending()) {
756 /*
757 * If IRQD_WAKEUP_ARMED is set for the SCI at this point, the
758 * SCI has not triggered while suspended, so bail out (the
759 * wakeup is pending anyway and the SCI is not the source of
760 * it).
761 */
762 if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) {
763 pm_pr_dbg("Wakeup unrelated to ACPI SCI\n");
764 return true;
765 }
766
767 /*
768 * If the status bit of any enabled fixed event is set, the
769 * wakeup is regarded as valid.
770 */
771 if (acpi_any_fixed_event_status_set()) {
772 pm_pr_dbg("ACPI fixed event wakeup\n");
773 return true;
774 }
775
776 /* Check wakeups from drivers sharing the SCI. */
777 if (acpi_check_wakeup_handlers()) {
778 pm_pr_dbg("ACPI custom handler wakeup\n");
779 return true;
780 }
781
782 /*
783 * Check non-EC GPE wakeups and if there are none, cancel the
784 * SCI-related wakeup and dispatch the EC GPE.
785 */
786 if (acpi_ec_dispatch_gpe()) {
787 pm_pr_dbg("ACPI non-EC GPE wakeup\n");
788 return true;
789 }
790
791 acpi_os_wait_events_complete();
792
793 /*
794 * The SCI is in the "suspended" state now and it cannot produce
795 * new wakeup events till the rearming below, so if any of them
796 * are pending here, they must be resulting from the processing
797 * of EC events above or coming from somewhere else.
798 */
799 if (pm_wakeup_pending()) {
800 pm_pr_dbg("Wakeup after ACPI Notify sync\n");
801 return true;
802 }
803
804 pm_pr_dbg("Rearming ACPI SCI for wakeup\n");
805
806 pm_wakeup_clear(acpi_sci_irq);
807 rearm_wake_irq(acpi_sci_irq);
808 }
809
810 return false;
811}
812
813void acpi_s2idle_restore(void)
814{
815 /*
816 * Drain pending events before restoring the working-state configuration
817 * of GPEs.
818 */
819 acpi_os_wait_events_complete(); /* synchronize GPE processing */
820 acpi_ec_flush_work(); /* flush the EC driver's workqueues */
821 acpi_os_wait_events_complete(); /* synchronize Notify handling */
822
823 s2idle_wakeup = false;
824
825 acpi_enable_all_runtime_gpes();
826
827 acpi_disable_wakeup_devices(ACPI_STATE_S0);
828
829 if (acpi_sci_irq_valid()) {
830 acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE);
831 disable_irq_wake(acpi_sci_irq);
832 }
833}
834
835void acpi_s2idle_end(void)
836{
837 acpi_scan_lock_release();
838}
839
840static const struct platform_s2idle_ops acpi_s2idle_ops = {
841 .begin = acpi_s2idle_begin,
842 .prepare = acpi_s2idle_prepare,
843 .wake = acpi_s2idle_wake,
844 .restore = acpi_s2idle_restore,
845 .end = acpi_s2idle_end,
846};
847
848void __weak acpi_s2idle_setup(void)
849{
850 if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)
851 pr_info("Efficient low-power S0 idle declared\n");
852
853 s2idle_set_ops(&acpi_s2idle_ops);
854}
855
856static void __init acpi_sleep_suspend_setup(void)
857{
858 bool suspend_ops_needed = false;
859 int i;
860
861 for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
862 if (acpi_sleep_state_supported(i)) {
863 sleep_states[i] = 1;
864 suspend_ops_needed = true;
865 }
866
867 if (suspend_ops_needed)
868 suspend_set_ops(old_suspend_ordering ?
869 &acpi_suspend_ops_old : &acpi_suspend_ops);
870
871 acpi_s2idle_setup();
872}
873
874#else /* !CONFIG_SUSPEND */
875#define s2idle_wakeup (false)
876static inline void acpi_sleep_suspend_setup(void) {}
877#endif /* !CONFIG_SUSPEND */
878
879bool acpi_s2idle_wakeup(void)
880{
881 return s2idle_wakeup;
882}
883
884#ifdef CONFIG_PM_SLEEP
885static u32 saved_bm_rld;
886
887static int acpi_save_bm_rld(void)
888{
889 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
890 return 0;
891}
892
893static void acpi_restore_bm_rld(void)
894{
895 u32 resumed_bm_rld = 0;
896
897 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
898 if (resumed_bm_rld == saved_bm_rld)
899 return;
900
901 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
902}
903
904static struct syscore_ops acpi_sleep_syscore_ops = {
905 .suspend = acpi_save_bm_rld,
906 .resume = acpi_restore_bm_rld,
907};
908
909static void acpi_sleep_syscore_init(void)
910{
911 register_syscore_ops(&acpi_sleep_syscore_ops);
912}
913#else
914static inline void acpi_sleep_syscore_init(void) {}
915#endif /* CONFIG_PM_SLEEP */
916
917#ifdef CONFIG_HIBERNATION
918static unsigned long s4_hardware_signature;
919static struct acpi_table_facs *facs;
920int acpi_check_s4_hw_signature = -1; /* Default behaviour is just to warn */
921
922static int acpi_hibernation_begin(pm_message_t stage)
923{
924 if (!nvs_nosave) {
925 int error = suspend_nvs_alloc();
926 if (error)
927 return error;
928 }
929
930 if (stage.event == PM_EVENT_HIBERNATE)
931 pm_set_suspend_via_firmware();
932
933 acpi_pm_start(ACPI_STATE_S4);
934 return 0;
935}
936
937static int acpi_hibernation_enter(void)
938{
939 acpi_status status = AE_OK;
940
941 /* This shouldn't return. If it returns, we have a problem */
942 status = acpi_enter_sleep_state(ACPI_STATE_S4);
943 /* Reprogram control registers */
944 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
945
946 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
947}
948
949static void acpi_hibernation_leave(void)
950{
951 pm_set_resume_via_firmware();
952 /*
953 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
954 * enable it here.
955 */
956 acpi_enable();
957 /* Reprogram control registers */
958 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
959 /* Check the hardware signature */
960 if (facs && s4_hardware_signature != facs->hardware_signature)
961 pr_crit("Hardware changed while hibernated, success doubtful!\n");
962 /* Restore the NVS memory area */
963 suspend_nvs_restore();
964 /* Allow EC transactions to happen. */
965 acpi_ec_unblock_transactions();
966}
967
968static void acpi_pm_thaw(void)
969{
970 acpi_ec_unblock_transactions();
971 acpi_enable_all_runtime_gpes();
972}
973
974static const struct platform_hibernation_ops acpi_hibernation_ops = {
975 .begin = acpi_hibernation_begin,
976 .end = acpi_pm_end,
977 .pre_snapshot = acpi_pm_prepare,
978 .finish = acpi_pm_finish,
979 .prepare = acpi_pm_prepare,
980 .enter = acpi_hibernation_enter,
981 .leave = acpi_hibernation_leave,
982 .pre_restore = acpi_pm_freeze,
983 .restore_cleanup = acpi_pm_thaw,
984};
985
986/**
987 * acpi_hibernation_begin_old - Set the target system sleep state to
988 * ACPI_STATE_S4 and execute the _PTS control method. This
989 * function is used if the pre-ACPI 2.0 suspend ordering has been
990 * requested.
991 * @stage: The power management event message.
992 */
993static int acpi_hibernation_begin_old(pm_message_t stage)
994{
995 int error;
996 /*
997 * The _TTS object should always be evaluated before the _PTS object.
998 * When the old_suspended_ordering is true, the _PTS object is
999 * evaluated in the acpi_sleep_prepare.
1000 */
1001 acpi_sleep_tts_switch(ACPI_STATE_S4);
1002
1003 error = acpi_sleep_prepare(ACPI_STATE_S4);
1004 if (error)
1005 return error;
1006
1007 if (!nvs_nosave) {
1008 error = suspend_nvs_alloc();
1009 if (error)
1010 return error;
1011 }
1012
1013 if (stage.event == PM_EVENT_HIBERNATE)
1014 pm_set_suspend_via_firmware();
1015
1016 acpi_target_sleep_state = ACPI_STATE_S4;
1017 acpi_scan_lock_acquire();
1018 return 0;
1019}
1020
1021/*
1022 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
1023 * been requested.
1024 */
1025static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
1026 .begin = acpi_hibernation_begin_old,
1027 .end = acpi_pm_end,
1028 .pre_snapshot = acpi_pm_pre_suspend,
1029 .prepare = acpi_pm_freeze,
1030 .finish = acpi_pm_finish,
1031 .enter = acpi_hibernation_enter,
1032 .leave = acpi_hibernation_leave,
1033 .pre_restore = acpi_pm_freeze,
1034 .restore_cleanup = acpi_pm_thaw,
1035 .recover = acpi_pm_finish,
1036};
1037
1038static void acpi_sleep_hibernate_setup(void)
1039{
1040 if (!acpi_sleep_state_supported(ACPI_STATE_S4))
1041 return;
1042
1043 hibernation_set_ops(old_suspend_ordering ?
1044 &acpi_hibernation_ops_old : &acpi_hibernation_ops);
1045 sleep_states[ACPI_STATE_S4] = 1;
1046 if (!acpi_check_s4_hw_signature)
1047 return;
1048
1049 acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
1050 if (facs) {
1051 /*
1052 * s4_hardware_signature is the local variable which is just
1053 * used to warn about mismatch after we're attempting to
1054 * resume (in violation of the ACPI specification.)
1055 */
1056 s4_hardware_signature = facs->hardware_signature;
1057
1058 if (acpi_check_s4_hw_signature > 0) {
1059 /*
1060 * If we're actually obeying the ACPI specification
1061 * then the signature is written out as part of the
1062 * swsusp header, in order to allow the boot kernel
1063 * to gracefully decline to resume.
1064 */
1065 swsusp_hardware_signature = facs->hardware_signature;
1066 }
1067 }
1068}
1069#else /* !CONFIG_HIBERNATION */
1070static inline void acpi_sleep_hibernate_setup(void) {}
1071#endif /* !CONFIG_HIBERNATION */
1072
1073static int acpi_power_off_prepare(struct sys_off_data *data)
1074{
1075 /* Prepare to power off the system */
1076 acpi_sleep_prepare(ACPI_STATE_S5);
1077 acpi_disable_all_gpes();
1078 acpi_os_wait_events_complete();
1079 return NOTIFY_DONE;
1080}
1081
1082static int acpi_power_off(struct sys_off_data *data)
1083{
1084 /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
1085 pr_debug("%s called\n", __func__);
1086 local_irq_disable();
1087 acpi_enter_sleep_state(ACPI_STATE_S5);
1088 return NOTIFY_DONE;
1089}
1090
1091int __init acpi_sleep_init(void)
1092{
1093 char supported[ACPI_S_STATE_COUNT * 3 + 1];
1094 char *pos = supported;
1095 int i;
1096
1097 acpi_sleep_dmi_check();
1098
1099 sleep_states[ACPI_STATE_S0] = 1;
1100
1101 acpi_sleep_syscore_init();
1102 acpi_sleep_suspend_setup();
1103 acpi_sleep_hibernate_setup();
1104
1105 if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
1106 sleep_states[ACPI_STATE_S5] = 1;
1107
1108 register_sys_off_handler(SYS_OFF_MODE_POWER_OFF_PREPARE,
1109 SYS_OFF_PRIO_FIRMWARE,
1110 acpi_power_off_prepare, NULL);
1111
1112 register_sys_off_handler(SYS_OFF_MODE_POWER_OFF,
1113 SYS_OFF_PRIO_FIRMWARE,
1114 acpi_power_off, NULL);
1115
1116 /*
1117 * Windows uses S5 for reboot, so some BIOSes depend on it to
1118 * perform proper reboot.
1119 */
1120 register_sys_off_handler(SYS_OFF_MODE_RESTART_PREPARE,
1121 SYS_OFF_PRIO_FIRMWARE,
1122 acpi_power_off_prepare, NULL);
1123 } else {
1124 acpi_no_s5 = true;
1125 }
1126
1127 supported[0] = 0;
1128 for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
1129 if (sleep_states[i])
1130 pos += sprintf(pos, " S%d", i);
1131 }
1132 pr_info("(supports%s)\n", supported);
1133
1134 /*
1135 * Register the tts_notifier to reboot notifier list so that the _TTS
1136 * object can also be evaluated when the system enters S5.
1137 */
1138 register_reboot_notifier(&tts_notifier);
1139 return 0;
1140}
1/*
2 * sleep.c - ACPI sleep support.
3 *
4 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
5 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
6 * Copyright (c) 2000-2003 Patrick Mochel
7 * Copyright (c) 2003 Open Source Development Lab
8 *
9 * This file is released under the GPLv2.
10 *
11 */
12
13#include <linux/delay.h>
14#include <linux/irq.h>
15#include <linux/dmi.h>
16#include <linux/device.h>
17#include <linux/suspend.h>
18#include <linux/reboot.h>
19#include <linux/acpi.h>
20
21#include <asm/io.h>
22
23#include <acpi/acpi_bus.h>
24#include <acpi/acpi_drivers.h>
25
26#include "internal.h"
27#include "sleep.h"
28
29static u8 sleep_states[ACPI_S_STATE_COUNT];
30
31static void acpi_sleep_tts_switch(u32 acpi_state)
32{
33 union acpi_object in_arg = { ACPI_TYPE_INTEGER };
34 struct acpi_object_list arg_list = { 1, &in_arg };
35 acpi_status status = AE_OK;
36
37 in_arg.integer.value = acpi_state;
38 status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
39 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
40 /*
41 * OS can't evaluate the _TTS object correctly. Some warning
42 * message will be printed. But it won't break anything.
43 */
44 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
45 }
46}
47
48static int tts_notify_reboot(struct notifier_block *this,
49 unsigned long code, void *x)
50{
51 acpi_sleep_tts_switch(ACPI_STATE_S5);
52 return NOTIFY_DONE;
53}
54
55static struct notifier_block tts_notifier = {
56 .notifier_call = tts_notify_reboot,
57 .next = NULL,
58 .priority = 0,
59};
60
61static int acpi_sleep_prepare(u32 acpi_state)
62{
63#ifdef CONFIG_ACPI_SLEEP
64 /* do we have a wakeup address for S2 and S3? */
65 if (acpi_state == ACPI_STATE_S3) {
66 if (!acpi_wakeup_address) {
67 return -EFAULT;
68 }
69 acpi_set_firmware_waking_vector(
70 (acpi_physical_address)acpi_wakeup_address);
71
72 }
73 ACPI_FLUSH_CPU_CACHE();
74#endif
75 printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
76 acpi_state);
77 acpi_enable_wakeup_devices(acpi_state);
78 acpi_enter_sleep_state_prep(acpi_state);
79 return 0;
80}
81
82#ifdef CONFIG_ACPI_SLEEP
83static u32 acpi_target_sleep_state = ACPI_STATE_S0;
84
85/*
86 * The ACPI specification wants us to save NVS memory regions during hibernation
87 * and to restore them during the subsequent resume. Windows does that also for
88 * suspend to RAM. However, it is known that this mechanism does not work on
89 * all machines, so we allow the user to disable it with the help of the
90 * 'acpi_sleep=nonvs' kernel command line option.
91 */
92static bool nvs_nosave;
93
94void __init acpi_nvs_nosave(void)
95{
96 nvs_nosave = true;
97}
98
99/*
100 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
101 * user to request that behavior by using the 'acpi_old_suspend_ordering'
102 * kernel command line option that causes the following variable to be set.
103 */
104static bool old_suspend_ordering;
105
106void __init acpi_old_suspend_ordering(void)
107{
108 old_suspend_ordering = true;
109}
110
111/**
112 * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
113 */
114static int acpi_pm_freeze(void)
115{
116 acpi_disable_all_gpes();
117 acpi_os_wait_events_complete(NULL);
118 acpi_ec_block_transactions();
119 return 0;
120}
121
122/**
123 * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
124 */
125static int acpi_pm_pre_suspend(void)
126{
127 acpi_pm_freeze();
128 return suspend_nvs_save();
129}
130
131/**
132 * __acpi_pm_prepare - Prepare the platform to enter the target state.
133 *
134 * If necessary, set the firmware waking vector and do arch-specific
135 * nastiness to get the wakeup code to the waking vector.
136 */
137static int __acpi_pm_prepare(void)
138{
139 int error = acpi_sleep_prepare(acpi_target_sleep_state);
140 if (error)
141 acpi_target_sleep_state = ACPI_STATE_S0;
142
143 return error;
144}
145
146/**
147 * acpi_pm_prepare - Prepare the platform to enter the target sleep
148 * state and disable the GPEs.
149 */
150static int acpi_pm_prepare(void)
151{
152 int error = __acpi_pm_prepare();
153 if (!error)
154 error = acpi_pm_pre_suspend();
155
156 return error;
157}
158
159/**
160 * acpi_pm_finish - Instruct the platform to leave a sleep state.
161 *
162 * This is called after we wake back up (or if entering the sleep state
163 * failed).
164 */
165static void acpi_pm_finish(void)
166{
167 u32 acpi_state = acpi_target_sleep_state;
168
169 acpi_ec_unblock_transactions();
170 suspend_nvs_free();
171
172 if (acpi_state == ACPI_STATE_S0)
173 return;
174
175 printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
176 acpi_state);
177 acpi_disable_wakeup_devices(acpi_state);
178 acpi_leave_sleep_state(acpi_state);
179
180 /* reset firmware waking vector */
181 acpi_set_firmware_waking_vector((acpi_physical_address) 0);
182
183 acpi_target_sleep_state = ACPI_STATE_S0;
184}
185
186/**
187 * acpi_pm_end - Finish up suspend sequence.
188 */
189static void acpi_pm_end(void)
190{
191 /*
192 * This is necessary in case acpi_pm_finish() is not called during a
193 * failing transition to a sleep state.
194 */
195 acpi_target_sleep_state = ACPI_STATE_S0;
196 acpi_sleep_tts_switch(acpi_target_sleep_state);
197}
198#else /* !CONFIG_ACPI_SLEEP */
199#define acpi_target_sleep_state ACPI_STATE_S0
200#endif /* CONFIG_ACPI_SLEEP */
201
202#ifdef CONFIG_SUSPEND
203static u32 acpi_suspend_states[] = {
204 [PM_SUSPEND_ON] = ACPI_STATE_S0,
205 [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
206 [PM_SUSPEND_MEM] = ACPI_STATE_S3,
207 [PM_SUSPEND_MAX] = ACPI_STATE_S5
208};
209
210/**
211 * acpi_suspend_begin - Set the target system sleep state to the state
212 * associated with given @pm_state, if supported.
213 */
214static int acpi_suspend_begin(suspend_state_t pm_state)
215{
216 u32 acpi_state = acpi_suspend_states[pm_state];
217 int error = 0;
218
219 error = nvs_nosave ? 0 : suspend_nvs_alloc();
220 if (error)
221 return error;
222
223 if (sleep_states[acpi_state]) {
224 acpi_target_sleep_state = acpi_state;
225 acpi_sleep_tts_switch(acpi_target_sleep_state);
226 } else {
227 printk(KERN_ERR "ACPI does not support this state: %d\n",
228 pm_state);
229 error = -ENOSYS;
230 }
231 return error;
232}
233
234/**
235 * acpi_suspend_enter - Actually enter a sleep state.
236 * @pm_state: ignored
237 *
238 * Flush caches and go to sleep. For STR we have to call arch-specific
239 * assembly, which in turn call acpi_enter_sleep_state().
240 * It's unfortunate, but it works. Please fix if you're feeling frisky.
241 */
242static int acpi_suspend_enter(suspend_state_t pm_state)
243{
244 acpi_status status = AE_OK;
245 u32 acpi_state = acpi_target_sleep_state;
246 int error;
247
248 ACPI_FLUSH_CPU_CACHE();
249
250 switch (acpi_state) {
251 case ACPI_STATE_S1:
252 barrier();
253 status = acpi_enter_sleep_state(acpi_state);
254 break;
255
256 case ACPI_STATE_S3:
257 error = acpi_suspend_lowlevel();
258 if (error)
259 return error;
260 pr_info(PREFIX "Low-level resume complete\n");
261 break;
262 }
263
264 /* This violates the spec but is required for bug compatibility. */
265 acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
266
267 /* Reprogram control registers and execute _BFS */
268 acpi_leave_sleep_state_prep(acpi_state);
269
270 /* ACPI 3.0 specs (P62) says that it's the responsibility
271 * of the OSPM to clear the status bit [ implying that the
272 * POWER_BUTTON event should not reach userspace ]
273 */
274 if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
275 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
276
277 /*
278 * Disable and clear GPE status before interrupt is enabled. Some GPEs
279 * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
280 * acpi_leave_sleep_state will reenable specific GPEs later
281 */
282 acpi_disable_all_gpes();
283 /* Allow EC transactions to happen. */
284 acpi_ec_unblock_transactions_early();
285
286 suspend_nvs_restore();
287
288 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
289}
290
291static int acpi_suspend_state_valid(suspend_state_t pm_state)
292{
293 u32 acpi_state;
294
295 switch (pm_state) {
296 case PM_SUSPEND_ON:
297 case PM_SUSPEND_STANDBY:
298 case PM_SUSPEND_MEM:
299 acpi_state = acpi_suspend_states[pm_state];
300
301 return sleep_states[acpi_state];
302 default:
303 return 0;
304 }
305}
306
307static const struct platform_suspend_ops acpi_suspend_ops = {
308 .valid = acpi_suspend_state_valid,
309 .begin = acpi_suspend_begin,
310 .prepare_late = acpi_pm_prepare,
311 .enter = acpi_suspend_enter,
312 .wake = acpi_pm_finish,
313 .end = acpi_pm_end,
314};
315
316/**
317 * acpi_suspend_begin_old - Set the target system sleep state to the
318 * state associated with given @pm_state, if supported, and
319 * execute the _PTS control method. This function is used if the
320 * pre-ACPI 2.0 suspend ordering has been requested.
321 */
322static int acpi_suspend_begin_old(suspend_state_t pm_state)
323{
324 int error = acpi_suspend_begin(pm_state);
325 if (!error)
326 error = __acpi_pm_prepare();
327
328 return error;
329}
330
331/*
332 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
333 * been requested.
334 */
335static const struct platform_suspend_ops acpi_suspend_ops_old = {
336 .valid = acpi_suspend_state_valid,
337 .begin = acpi_suspend_begin_old,
338 .prepare_late = acpi_pm_pre_suspend,
339 .enter = acpi_suspend_enter,
340 .wake = acpi_pm_finish,
341 .end = acpi_pm_end,
342 .recover = acpi_pm_finish,
343};
344
345static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
346{
347 old_suspend_ordering = true;
348 return 0;
349}
350
351static int __init init_nvs_nosave(const struct dmi_system_id *d)
352{
353 acpi_nvs_nosave();
354 return 0;
355}
356
357static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
358 {
359 .callback = init_old_suspend_ordering,
360 .ident = "Abit KN9 (nForce4 variant)",
361 .matches = {
362 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
363 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
364 },
365 },
366 {
367 .callback = init_old_suspend_ordering,
368 .ident = "HP xw4600 Workstation",
369 .matches = {
370 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
371 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
372 },
373 },
374 {
375 .callback = init_old_suspend_ordering,
376 .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
377 .matches = {
378 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
379 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
380 },
381 },
382 {
383 .callback = init_old_suspend_ordering,
384 .ident = "Panasonic CF51-2L",
385 .matches = {
386 DMI_MATCH(DMI_BOARD_VENDOR,
387 "Matsushita Electric Industrial Co.,Ltd."),
388 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
389 },
390 },
391 {
392 .callback = init_nvs_nosave,
393 .ident = "Sony Vaio VGN-SR11M",
394 .matches = {
395 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
396 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
397 },
398 },
399 {
400 .callback = init_nvs_nosave,
401 .ident = "Everex StepNote Series",
402 .matches = {
403 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
404 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
405 },
406 },
407 {
408 .callback = init_nvs_nosave,
409 .ident = "Sony Vaio VPCEB1Z1E",
410 .matches = {
411 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
412 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
413 },
414 },
415 {
416 .callback = init_nvs_nosave,
417 .ident = "Sony Vaio VGN-NW130D",
418 .matches = {
419 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
420 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
421 },
422 },
423 {
424 .callback = init_nvs_nosave,
425 .ident = "Averatec AV1020-ED2",
426 .matches = {
427 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
428 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
429 },
430 },
431 {
432 .callback = init_old_suspend_ordering,
433 .ident = "Asus A8N-SLI DELUXE",
434 .matches = {
435 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
436 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
437 },
438 },
439 {
440 .callback = init_old_suspend_ordering,
441 .ident = "Asus A8N-SLI Premium",
442 .matches = {
443 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
444 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
445 },
446 },
447 {},
448};
449#endif /* CONFIG_SUSPEND */
450
451#ifdef CONFIG_HIBERNATION
452static unsigned long s4_hardware_signature;
453static struct acpi_table_facs *facs;
454static bool nosigcheck;
455
456void __init acpi_no_s4_hw_signature(void)
457{
458 nosigcheck = true;
459}
460
461static int acpi_hibernation_begin(void)
462{
463 int error;
464
465 error = nvs_nosave ? 0 : suspend_nvs_alloc();
466 if (!error) {
467 acpi_target_sleep_state = ACPI_STATE_S4;
468 acpi_sleep_tts_switch(acpi_target_sleep_state);
469 }
470
471 return error;
472}
473
474static int acpi_hibernation_enter(void)
475{
476 acpi_status status = AE_OK;
477
478 ACPI_FLUSH_CPU_CACHE();
479
480 /* This shouldn't return. If it returns, we have a problem */
481 status = acpi_enter_sleep_state(ACPI_STATE_S4);
482 /* Reprogram control registers and execute _BFS */
483 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
484
485 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
486}
487
488static void acpi_hibernation_leave(void)
489{
490 /*
491 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
492 * enable it here.
493 */
494 acpi_enable();
495 /* Reprogram control registers and execute _BFS */
496 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
497 /* Check the hardware signature */
498 if (facs && s4_hardware_signature != facs->hardware_signature) {
499 printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
500 "cannot resume!\n");
501 panic("ACPI S4 hardware signature mismatch");
502 }
503 /* Restore the NVS memory area */
504 suspend_nvs_restore();
505 /* Allow EC transactions to happen. */
506 acpi_ec_unblock_transactions_early();
507}
508
509static void acpi_pm_thaw(void)
510{
511 acpi_ec_unblock_transactions();
512 acpi_enable_all_runtime_gpes();
513}
514
515static const struct platform_hibernation_ops acpi_hibernation_ops = {
516 .begin = acpi_hibernation_begin,
517 .end = acpi_pm_end,
518 .pre_snapshot = acpi_pm_prepare,
519 .finish = acpi_pm_finish,
520 .prepare = acpi_pm_prepare,
521 .enter = acpi_hibernation_enter,
522 .leave = acpi_hibernation_leave,
523 .pre_restore = acpi_pm_freeze,
524 .restore_cleanup = acpi_pm_thaw,
525};
526
527/**
528 * acpi_hibernation_begin_old - Set the target system sleep state to
529 * ACPI_STATE_S4 and execute the _PTS control method. This
530 * function is used if the pre-ACPI 2.0 suspend ordering has been
531 * requested.
532 */
533static int acpi_hibernation_begin_old(void)
534{
535 int error;
536 /*
537 * The _TTS object should always be evaluated before the _PTS object.
538 * When the old_suspended_ordering is true, the _PTS object is
539 * evaluated in the acpi_sleep_prepare.
540 */
541 acpi_sleep_tts_switch(ACPI_STATE_S4);
542
543 error = acpi_sleep_prepare(ACPI_STATE_S4);
544
545 if (!error) {
546 if (!nvs_nosave)
547 error = suspend_nvs_alloc();
548 if (!error)
549 acpi_target_sleep_state = ACPI_STATE_S4;
550 }
551 return error;
552}
553
554/*
555 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
556 * been requested.
557 */
558static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
559 .begin = acpi_hibernation_begin_old,
560 .end = acpi_pm_end,
561 .pre_snapshot = acpi_pm_pre_suspend,
562 .prepare = acpi_pm_freeze,
563 .finish = acpi_pm_finish,
564 .enter = acpi_hibernation_enter,
565 .leave = acpi_hibernation_leave,
566 .pre_restore = acpi_pm_freeze,
567 .restore_cleanup = acpi_pm_thaw,
568 .recover = acpi_pm_finish,
569};
570#endif /* CONFIG_HIBERNATION */
571
572int acpi_suspend(u32 acpi_state)
573{
574 suspend_state_t states[] = {
575 [1] = PM_SUSPEND_STANDBY,
576 [3] = PM_SUSPEND_MEM,
577 [5] = PM_SUSPEND_MAX
578 };
579
580 if (acpi_state < 6 && states[acpi_state])
581 return pm_suspend(states[acpi_state]);
582 if (acpi_state == 4)
583 return hibernate();
584 return -EINVAL;
585}
586
587#ifdef CONFIG_PM
588/**
589 * acpi_pm_device_sleep_state - return preferred power state of ACPI device
590 * in the system sleep state given by %acpi_target_sleep_state
591 * @dev: device to examine; its driver model wakeup flags control
592 * whether it should be able to wake up the system
593 * @d_min_p: used to store the upper limit of allowed states range
594 * Return value: preferred power state of the device on success, -ENODEV on
595 * failure (ie. if there's no 'struct acpi_device' for @dev)
596 *
597 * Find the lowest power (highest number) ACPI device power state that
598 * device @dev can be in while the system is in the sleep state represented
599 * by %acpi_target_sleep_state. If @wake is nonzero, the device should be
600 * able to wake up the system from this sleep state. If @d_min_p is set,
601 * the highest power (lowest number) device power state of @dev allowed
602 * in this system sleep state is stored at the location pointed to by it.
603 *
604 * The caller must ensure that @dev is valid before using this function.
605 * The caller is also responsible for figuring out if the device is
606 * supposed to be able to wake up the system and passing this information
607 * via @wake.
608 */
609
610int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
611{
612 acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
613 struct acpi_device *adev;
614 char acpi_method[] = "_SxD";
615 unsigned long long d_min, d_max;
616
617 if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
618 printk(KERN_DEBUG "ACPI handle has no context!\n");
619 return -ENODEV;
620 }
621
622 acpi_method[2] = '0' + acpi_target_sleep_state;
623 /*
624 * If the sleep state is S0, we will return D3, but if the device has
625 * _S0W, we will use the value from _S0W
626 */
627 d_min = ACPI_STATE_D0;
628 d_max = ACPI_STATE_D3;
629
630 /*
631 * If present, _SxD methods return the minimum D-state (highest power
632 * state) we can use for the corresponding S-states. Otherwise, the
633 * minimum D-state is D0 (ACPI 3.x).
634 *
635 * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
636 * provided -- that's our fault recovery, we ignore retval.
637 */
638 if (acpi_target_sleep_state > ACPI_STATE_S0)
639 acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
640
641 /*
642 * If _PRW says we can wake up the system from the target sleep state,
643 * the D-state returned by _SxD is sufficient for that (we assume a
644 * wakeup-aware driver if wake is set). Still, if _SxW exists
645 * (ACPI 3.x), it should return the maximum (lowest power) D-state that
646 * can wake the system. _S0W may be valid, too.
647 */
648 if (acpi_target_sleep_state == ACPI_STATE_S0 ||
649 (device_may_wakeup(dev) &&
650 adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
651 acpi_status status;
652
653 acpi_method[3] = 'W';
654 status = acpi_evaluate_integer(handle, acpi_method, NULL,
655 &d_max);
656 if (ACPI_FAILURE(status)) {
657 if (acpi_target_sleep_state != ACPI_STATE_S0 ||
658 status != AE_NOT_FOUND)
659 d_max = d_min;
660 } else if (d_max < d_min) {
661 /* Warn the user of the broken DSDT */
662 printk(KERN_WARNING "ACPI: Wrong value from %s\n",
663 acpi_method);
664 /* Sanitize it */
665 d_min = d_max;
666 }
667 }
668
669 if (d_min_p)
670 *d_min_p = d_min;
671 return d_max;
672}
673#endif /* CONFIG_PM */
674
675#ifdef CONFIG_PM_SLEEP
676/**
677 * acpi_pm_device_sleep_wake - enable or disable the system wake-up
678 * capability of given device
679 * @dev: device to handle
680 * @enable: 'true' - enable, 'false' - disable the wake-up capability
681 */
682int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
683{
684 acpi_handle handle;
685 struct acpi_device *adev;
686 int error;
687
688 if (!device_can_wakeup(dev))
689 return -EINVAL;
690
691 handle = DEVICE_ACPI_HANDLE(dev);
692 if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
693 dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
694 return -ENODEV;
695 }
696
697 error = enable ?
698 acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
699 acpi_disable_wakeup_device_power(adev);
700 if (!error)
701 dev_info(dev, "wake-up capability %s by ACPI\n",
702 enable ? "enabled" : "disabled");
703
704 return error;
705}
706#endif /* CONFIG_PM_SLEEP */
707
708static void acpi_power_off_prepare(void)
709{
710 /* Prepare to power off the system */
711 acpi_sleep_prepare(ACPI_STATE_S5);
712 acpi_disable_all_gpes();
713}
714
715static void acpi_power_off(void)
716{
717 /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
718 printk(KERN_DEBUG "%s called\n", __func__);
719 local_irq_disable();
720 acpi_enter_sleep_state(ACPI_STATE_S5);
721}
722
723/*
724 * ACPI 2.0 created the optional _GTS and _BFS,
725 * but industry adoption has been neither rapid nor broad.
726 *
727 * Linux gets into trouble when it executes poorly validated
728 * paths through the BIOS, so disable _GTS and _BFS by default,
729 * but do speak up and offer the option to enable them.
730 */
731static void __init acpi_gts_bfs_check(void)
732{
733 acpi_handle dummy;
734
735 if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
736 {
737 printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
738 printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
739 "please notify linux-acpi@vger.kernel.org\n");
740 }
741 if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
742 {
743 printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
744 printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
745 "please notify linux-acpi@vger.kernel.org\n");
746 }
747}
748
749int __init acpi_sleep_init(void)
750{
751 acpi_status status;
752 u8 type_a, type_b;
753#ifdef CONFIG_SUSPEND
754 int i = 0;
755
756 dmi_check_system(acpisleep_dmi_table);
757#endif
758
759 if (acpi_disabled)
760 return 0;
761
762 sleep_states[ACPI_STATE_S0] = 1;
763 printk(KERN_INFO PREFIX "(supports S0");
764
765#ifdef CONFIG_SUSPEND
766 for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
767 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
768 if (ACPI_SUCCESS(status)) {
769 sleep_states[i] = 1;
770 printk(" S%d", i);
771 }
772 }
773
774 suspend_set_ops(old_suspend_ordering ?
775 &acpi_suspend_ops_old : &acpi_suspend_ops);
776#endif
777
778#ifdef CONFIG_HIBERNATION
779 status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
780 if (ACPI_SUCCESS(status)) {
781 hibernation_set_ops(old_suspend_ordering ?
782 &acpi_hibernation_ops_old : &acpi_hibernation_ops);
783 sleep_states[ACPI_STATE_S4] = 1;
784 printk(" S4");
785 if (!nosigcheck) {
786 acpi_get_table(ACPI_SIG_FACS, 1,
787 (struct acpi_table_header **)&facs);
788 if (facs)
789 s4_hardware_signature =
790 facs->hardware_signature;
791 }
792 }
793#endif
794 status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
795 if (ACPI_SUCCESS(status)) {
796 sleep_states[ACPI_STATE_S5] = 1;
797 printk(" S5");
798 pm_power_off_prepare = acpi_power_off_prepare;
799 pm_power_off = acpi_power_off;
800 }
801 printk(")\n");
802 /*
803 * Register the tts_notifier to reboot notifier list so that the _TTS
804 * object can also be evaluated when the system enters S5.
805 */
806 register_reboot_notifier(&tts_notifier);
807 acpi_gts_bfs_check();
808 return 0;
809}