Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * sleep.c - ACPI sleep support.
4 *
5 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
6 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
7 * Copyright (c) 2000-2003 Patrick Mochel
8 * Copyright (c) 2003 Open Source Development Lab
9 */
10
11#define pr_fmt(fmt) "ACPI: PM: " fmt
12
13#include <linux/delay.h>
14#include <linux/irq.h>
15#include <linux/dmi.h>
16#include <linux/device.h>
17#include <linux/interrupt.h>
18#include <linux/suspend.h>
19#include <linux/reboot.h>
20#include <linux/acpi.h>
21#include <linux/module.h>
22#include <linux/syscore_ops.h>
23#include <asm/io.h>
24#include <trace/events/power.h>
25
26#include "internal.h"
27#include "sleep.h"
28
29/*
30 * Some HW-full platforms do not have _S5, so they may need
31 * to leverage efi power off for a shutdown.
32 */
33bool acpi_no_s5;
34static u8 sleep_states[ACPI_S_STATE_COUNT];
35
36static void acpi_sleep_tts_switch(u32 acpi_state)
37{
38 acpi_status status;
39
40 status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
41 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
42 /*
43 * OS can't evaluate the _TTS object correctly. Some warning
44 * message will be printed. But it won't break anything.
45 */
46 pr_notice("Failure in evaluating _TTS object\n");
47 }
48}
49
50static int tts_notify_reboot(struct notifier_block *this,
51 unsigned long code, void *x)
52{
53 acpi_sleep_tts_switch(ACPI_STATE_S5);
54 return NOTIFY_DONE;
55}
56
57static struct notifier_block tts_notifier = {
58 .notifier_call = tts_notify_reboot,
59 .next = NULL,
60 .priority = 0,
61};
62
63#ifndef acpi_skip_set_wakeup_address
64#define acpi_skip_set_wakeup_address() false
65#endif
66
67static int acpi_sleep_prepare(u32 acpi_state)
68{
69#ifdef CONFIG_ACPI_SLEEP
70 unsigned long acpi_wakeup_address;
71
72 /* do we have a wakeup address for S2 and S3? */
73 if (acpi_state == ACPI_STATE_S3 && !acpi_skip_set_wakeup_address()) {
74 acpi_wakeup_address = acpi_get_wakeup_address();
75 if (!acpi_wakeup_address)
76 return -EFAULT;
77 acpi_set_waking_vector(acpi_wakeup_address);
78
79 }
80#endif
81 pr_info("Preparing to enter system sleep state S%d\n", acpi_state);
82 acpi_enable_wakeup_devices(acpi_state);
83 acpi_enter_sleep_state_prep(acpi_state);
84 return 0;
85}
86
87bool acpi_sleep_state_supported(u8 sleep_state)
88{
89 acpi_status status;
90 u8 type_a, type_b;
91
92 status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
93 return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
94 || (acpi_gbl_FADT.sleep_control.address
95 && acpi_gbl_FADT.sleep_status.address));
96}
97
98#ifdef CONFIG_ACPI_SLEEP
99static u32 acpi_target_sleep_state = ACPI_STATE_S0;
100
101u32 acpi_target_system_state(void)
102{
103 return acpi_target_sleep_state;
104}
105EXPORT_SYMBOL_GPL(acpi_target_system_state);
106
107static bool pwr_btn_event_pending;
108
109/*
110 * The ACPI specification wants us to save NVS memory regions during hibernation
111 * and to restore them during the subsequent resume. Windows does that also for
112 * suspend to RAM. However, it is known that this mechanism does not work on
113 * all machines, so we allow the user to disable it with the help of the
114 * 'acpi_sleep=nonvs' kernel command line option.
115 */
116static bool nvs_nosave;
117
118void __init acpi_nvs_nosave(void)
119{
120 nvs_nosave = true;
121}
122
123/*
124 * The ACPI specification wants us to save NVS memory regions during hibernation
125 * but says nothing about saving NVS during S3. Not all versions of Windows
126 * save NVS on S3 suspend either, and it is clear that not all systems need
127 * NVS to be saved at S3 time. To improve suspend/resume time, allow the
128 * user to disable saving NVS on S3 if their system does not require it, but
129 * continue to save/restore NVS for S4 as specified.
130 */
131static bool nvs_nosave_s3;
132
133void __init acpi_nvs_nosave_s3(void)
134{
135 nvs_nosave_s3 = true;
136}
137
138static int __init init_nvs_save_s3(const struct dmi_system_id *d)
139{
140 nvs_nosave_s3 = false;
141 return 0;
142}
143
144/*
145 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
146 * user to request that behavior by using the 'acpi_old_suspend_ordering'
147 * kernel command line option that causes the following variable to be set.
148 */
149static bool old_suspend_ordering;
150
151void __init acpi_old_suspend_ordering(void)
152{
153 old_suspend_ordering = true;
154}
155
156static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
157{
158 acpi_old_suspend_ordering();
159 return 0;
160}
161
162static int __init init_nvs_nosave(const struct dmi_system_id *d)
163{
164 acpi_nvs_nosave();
165 return 0;
166}
167
168bool acpi_sleep_default_s3;
169
170static int __init init_default_s3(const struct dmi_system_id *d)
171{
172 acpi_sleep_default_s3 = true;
173 return 0;
174}
175
176static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
177 {
178 .callback = init_old_suspend_ordering,
179 .ident = "Abit KN9 (nForce4 variant)",
180 .matches = {
181 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
182 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
183 },
184 },
185 {
186 .callback = init_old_suspend_ordering,
187 .ident = "HP xw4600 Workstation",
188 .matches = {
189 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
190 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
191 },
192 },
193 {
194 .callback = init_old_suspend_ordering,
195 .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
196 .matches = {
197 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
198 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
199 },
200 },
201 {
202 .callback = init_old_suspend_ordering,
203 .ident = "Panasonic CF51-2L",
204 .matches = {
205 DMI_MATCH(DMI_BOARD_VENDOR,
206 "Matsushita Electric Industrial Co.,Ltd."),
207 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
208 },
209 },
210 {
211 .callback = init_nvs_nosave,
212 .ident = "Sony Vaio VGN-FW41E_H",
213 .matches = {
214 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
215 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
216 },
217 },
218 {
219 .callback = init_nvs_nosave,
220 .ident = "Sony Vaio VGN-FW21E",
221 .matches = {
222 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
223 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
224 },
225 },
226 {
227 .callback = init_nvs_nosave,
228 .ident = "Sony Vaio VGN-FW21M",
229 .matches = {
230 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
231 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
232 },
233 },
234 {
235 .callback = init_nvs_nosave,
236 .ident = "Sony Vaio VPCEB17FX",
237 .matches = {
238 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
239 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
240 },
241 },
242 {
243 .callback = init_nvs_nosave,
244 .ident = "Sony Vaio VGN-SR11M",
245 .matches = {
246 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
247 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
248 },
249 },
250 {
251 .callback = init_nvs_nosave,
252 .ident = "Everex StepNote Series",
253 .matches = {
254 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
255 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
256 },
257 },
258 {
259 .callback = init_nvs_nosave,
260 .ident = "Sony Vaio VPCEB1Z1E",
261 .matches = {
262 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
263 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
264 },
265 },
266 {
267 .callback = init_nvs_nosave,
268 .ident = "Sony Vaio VGN-NW130D",
269 .matches = {
270 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
271 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
272 },
273 },
274 {
275 .callback = init_nvs_nosave,
276 .ident = "Sony Vaio VPCCW29FX",
277 .matches = {
278 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
279 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
280 },
281 },
282 {
283 .callback = init_nvs_nosave,
284 .ident = "Averatec AV1020-ED2",
285 .matches = {
286 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
287 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
288 },
289 },
290 {
291 .callback = init_old_suspend_ordering,
292 .ident = "Asus A8N-SLI DELUXE",
293 .matches = {
294 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
295 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
296 },
297 },
298 {
299 .callback = init_old_suspend_ordering,
300 .ident = "Asus A8N-SLI Premium",
301 .matches = {
302 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
303 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
304 },
305 },
306 {
307 .callback = init_nvs_nosave,
308 .ident = "Sony Vaio VGN-SR26GN_P",
309 .matches = {
310 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
311 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
312 },
313 },
314 {
315 .callback = init_nvs_nosave,
316 .ident = "Sony Vaio VPCEB1S1E",
317 .matches = {
318 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
319 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
320 },
321 },
322 {
323 .callback = init_nvs_nosave,
324 .ident = "Sony Vaio VGN-FW520F",
325 .matches = {
326 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
327 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
328 },
329 },
330 {
331 .callback = init_nvs_nosave,
332 .ident = "Asus K54C",
333 .matches = {
334 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
335 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
336 },
337 },
338 {
339 .callback = init_nvs_nosave,
340 .ident = "Asus K54HR",
341 .matches = {
342 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
343 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
344 },
345 },
346 {
347 .callback = init_nvs_save_s3,
348 .ident = "Asus 1025C",
349 .matches = {
350 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
351 DMI_MATCH(DMI_PRODUCT_NAME, "1025C"),
352 },
353 },
354 /*
355 * The ASUS ROG M16 from 2023 has many events which wake it from s2idle
356 * resulting in excessive battery drain and risk of laptop overheating,
357 * these events can be caused by the MMC or y AniMe display if installed.
358 * The match is valid for all of the GU604V<x> range.
359 */
360 {
361 .callback = init_default_s3,
362 .ident = "ASUS ROG Zephyrus M16 (2023)",
363 .matches = {
364 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
365 DMI_MATCH(DMI_PRODUCT_NAME, "ROG Zephyrus M16 GU604V"),
366 },
367 },
368 /*
369 * https://bugzilla.kernel.org/show_bug.cgi?id=189431
370 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory
371 * saving during S3.
372 */
373 {
374 .callback = init_nvs_save_s3,
375 .ident = "Lenovo G50-45",
376 .matches = {
377 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
378 DMI_MATCH(DMI_PRODUCT_NAME, "80E3"),
379 },
380 },
381 {
382 .callback = init_nvs_save_s3,
383 .ident = "Lenovo G40-45",
384 .matches = {
385 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
386 DMI_MATCH(DMI_PRODUCT_NAME, "80E1"),
387 },
388 },
389 /*
390 * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using
391 * the Low Power S0 Idle firmware interface (see
392 * https://bugzilla.kernel.org/show_bug.cgi?id=199057).
393 */
394 {
395 .callback = init_default_s3,
396 .ident = "ThinkPad X1 Tablet(2016)",
397 .matches = {
398 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
399 DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"),
400 },
401 },
402 {},
403};
404
405static bool ignore_blacklist;
406
407void __init acpi_sleep_no_blacklist(void)
408{
409 ignore_blacklist = true;
410}
411
412static void __init acpi_sleep_dmi_check(void)
413{
414 if (ignore_blacklist)
415 return;
416
417 if (dmi_get_bios_year() >= 2012)
418 acpi_nvs_nosave_s3();
419
420 dmi_check_system(acpisleep_dmi_table);
421}
422
423/**
424 * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
425 */
426static int acpi_pm_freeze(void)
427{
428 acpi_disable_all_gpes();
429 acpi_os_wait_events_complete();
430 acpi_ec_block_transactions();
431 return 0;
432}
433
434/**
435 * acpi_pm_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
436 */
437static int acpi_pm_pre_suspend(void)
438{
439 acpi_pm_freeze();
440 return suspend_nvs_save();
441}
442
443/**
444 * __acpi_pm_prepare - Prepare the platform to enter the target state.
445 *
446 * If necessary, set the firmware waking vector and do arch-specific
447 * nastiness to get the wakeup code to the waking vector.
448 */
449static int __acpi_pm_prepare(void)
450{
451 int error = acpi_sleep_prepare(acpi_target_sleep_state);
452 if (error)
453 acpi_target_sleep_state = ACPI_STATE_S0;
454
455 return error;
456}
457
458/**
459 * acpi_pm_prepare - Prepare the platform to enter the target sleep
460 * state and disable the GPEs.
461 */
462static int acpi_pm_prepare(void)
463{
464 int error = __acpi_pm_prepare();
465 if (!error)
466 error = acpi_pm_pre_suspend();
467
468 return error;
469}
470
471/**
472 * acpi_pm_finish - Instruct the platform to leave a sleep state.
473 *
474 * This is called after we wake back up (or if entering the sleep state
475 * failed).
476 */
477static void acpi_pm_finish(void)
478{
479 struct acpi_device *pwr_btn_adev;
480 u32 acpi_state = acpi_target_sleep_state;
481
482 acpi_ec_unblock_transactions();
483 suspend_nvs_free();
484
485 if (acpi_state == ACPI_STATE_S0)
486 return;
487
488 pr_info("Waking up from system sleep state S%d\n", acpi_state);
489 acpi_disable_wakeup_devices(acpi_state);
490 acpi_leave_sleep_state(acpi_state);
491
492 /* reset firmware waking vector */
493 acpi_set_waking_vector(0);
494
495 acpi_target_sleep_state = ACPI_STATE_S0;
496
497 acpi_resume_power_resources();
498
499 /* If we were woken with the fixed power button, provide a small
500 * hint to userspace in the form of a wakeup event on the fixed power
501 * button device (if it can be found).
502 *
503 * We delay the event generation til now, as the PM layer requires
504 * timekeeping to be running before we generate events. */
505 if (!pwr_btn_event_pending)
506 return;
507
508 pwr_btn_event_pending = false;
509 pwr_btn_adev = acpi_dev_get_first_match_dev(ACPI_BUTTON_HID_POWERF,
510 NULL, -1);
511 if (pwr_btn_adev) {
512 pm_wakeup_event(&pwr_btn_adev->dev, 0);
513 acpi_dev_put(pwr_btn_adev);
514 }
515}
516
517/**
518 * acpi_pm_start - Start system PM transition.
519 * @acpi_state: The target ACPI power state to transition to.
520 */
521static void acpi_pm_start(u32 acpi_state)
522{
523 acpi_target_sleep_state = acpi_state;
524 acpi_sleep_tts_switch(acpi_target_sleep_state);
525 acpi_scan_lock_acquire();
526}
527
528/**
529 * acpi_pm_end - Finish up system PM transition.
530 */
531static void acpi_pm_end(void)
532{
533 acpi_turn_off_unused_power_resources();
534 acpi_scan_lock_release();
535 /*
536 * This is necessary in case acpi_pm_finish() is not called during a
537 * failing transition to a sleep state.
538 */
539 acpi_target_sleep_state = ACPI_STATE_S0;
540 acpi_sleep_tts_switch(acpi_target_sleep_state);
541}
542#else /* !CONFIG_ACPI_SLEEP */
543#define sleep_no_lps0 (1)
544#define acpi_target_sleep_state ACPI_STATE_S0
545#define acpi_sleep_default_s3 (1)
546static inline void acpi_sleep_dmi_check(void) {}
547#endif /* CONFIG_ACPI_SLEEP */
548
549#ifdef CONFIG_SUSPEND
550static u32 acpi_suspend_states[] = {
551 [PM_SUSPEND_ON] = ACPI_STATE_S0,
552 [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
553 [PM_SUSPEND_MEM] = ACPI_STATE_S3,
554 [PM_SUSPEND_MAX] = ACPI_STATE_S5
555};
556
557/**
558 * acpi_suspend_begin - Set the target system sleep state to the state
559 * associated with given @pm_state, if supported.
560 * @pm_state: The target system power management state.
561 */
562static int acpi_suspend_begin(suspend_state_t pm_state)
563{
564 u32 acpi_state = acpi_suspend_states[pm_state];
565 int error;
566
567 error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
568 if (error)
569 return error;
570
571 if (!sleep_states[acpi_state]) {
572 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
573 return -ENOSYS;
574 }
575 if (acpi_state > ACPI_STATE_S1)
576 pm_set_suspend_via_firmware();
577
578 acpi_pm_start(acpi_state);
579 return 0;
580}
581
582/**
583 * acpi_suspend_enter - Actually enter a sleep state.
584 * @pm_state: ignored
585 *
586 * Flush caches and go to sleep. For STR we have to call arch-specific
587 * assembly, which in turn call acpi_enter_sleep_state().
588 * It's unfortunate, but it works. Please fix if you're feeling frisky.
589 */
590static int acpi_suspend_enter(suspend_state_t pm_state)
591{
592 acpi_status status = AE_OK;
593 u32 acpi_state = acpi_target_sleep_state;
594 int error;
595
596 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true);
597 switch (acpi_state) {
598 case ACPI_STATE_S1:
599 barrier();
600 status = acpi_enter_sleep_state(acpi_state);
601 break;
602
603 case ACPI_STATE_S3:
604 if (!acpi_suspend_lowlevel)
605 return -ENOSYS;
606 error = acpi_suspend_lowlevel();
607 if (error)
608 return error;
609 pr_info("Low-level resume complete\n");
610 pm_set_resume_via_firmware();
611 break;
612 }
613 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false);
614
615 /* This violates the spec but is required for bug compatibility. */
616 acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
617
618 /* Reprogram control registers */
619 acpi_leave_sleep_state_prep(acpi_state);
620
621 /* ACPI 3.0 specs (P62) says that it's the responsibility
622 * of the OSPM to clear the status bit [ implying that the
623 * POWER_BUTTON event should not reach userspace ]
624 *
625 * However, we do generate a small hint for userspace in the form of
626 * a wakeup event. We flag this condition for now and generate the
627 * event later, as we're currently too early in resume to be able to
628 * generate wakeup events.
629 */
630 if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
631 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
632
633 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
634
635 if (pwr_btn_status & ACPI_EVENT_FLAG_STATUS_SET) {
636 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
637 /* Flag for later */
638 pwr_btn_event_pending = true;
639 }
640 }
641
642 /*
643 * Disable all GPE and clear their status bits before interrupts are
644 * enabled. Some GPEs (like wakeup GPEs) have no handlers and this can
645 * prevent them from producing spurious interrups.
646 *
647 * acpi_leave_sleep_state() will reenable specific GPEs later.
648 *
649 * Because this code runs on one CPU with disabled interrupts (all of
650 * the other CPUs are offline at this time), it need not acquire any
651 * sleeping locks which may trigger an implicit preemption point even
652 * if there is no contention, so avoid doing that by using a low-level
653 * library routine here.
654 */
655 acpi_hw_disable_all_gpes();
656 /* Allow EC transactions to happen. */
657 acpi_ec_unblock_transactions();
658
659 suspend_nvs_restore();
660
661 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
662}
663
664static int acpi_suspend_state_valid(suspend_state_t pm_state)
665{
666 u32 acpi_state;
667
668 switch (pm_state) {
669 case PM_SUSPEND_ON:
670 case PM_SUSPEND_STANDBY:
671 case PM_SUSPEND_MEM:
672 acpi_state = acpi_suspend_states[pm_state];
673
674 return sleep_states[acpi_state];
675 default:
676 return 0;
677 }
678}
679
680static const struct platform_suspend_ops acpi_suspend_ops = {
681 .valid = acpi_suspend_state_valid,
682 .begin = acpi_suspend_begin,
683 .prepare_late = acpi_pm_prepare,
684 .enter = acpi_suspend_enter,
685 .wake = acpi_pm_finish,
686 .end = acpi_pm_end,
687};
688
689/**
690 * acpi_suspend_begin_old - Set the target system sleep state to the
691 * state associated with given @pm_state, if supported, and
692 * execute the _PTS control method. This function is used if the
693 * pre-ACPI 2.0 suspend ordering has been requested.
694 * @pm_state: The target suspend state for the system.
695 */
696static int acpi_suspend_begin_old(suspend_state_t pm_state)
697{
698 int error = acpi_suspend_begin(pm_state);
699 if (!error)
700 error = __acpi_pm_prepare();
701
702 return error;
703}
704
705/*
706 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
707 * been requested.
708 */
709static const struct platform_suspend_ops acpi_suspend_ops_old = {
710 .valid = acpi_suspend_state_valid,
711 .begin = acpi_suspend_begin_old,
712 .prepare_late = acpi_pm_pre_suspend,
713 .enter = acpi_suspend_enter,
714 .wake = acpi_pm_finish,
715 .end = acpi_pm_end,
716 .recover = acpi_pm_finish,
717};
718
719static bool s2idle_wakeup;
720
721int acpi_s2idle_begin(void)
722{
723 acpi_scan_lock_acquire();
724 return 0;
725}
726
727int acpi_s2idle_prepare(void)
728{
729 if (acpi_sci_irq_valid()) {
730 int error;
731
732 error = enable_irq_wake(acpi_sci_irq);
733 if (error)
734 pr_warn("Warning: Failed to enable wakeup from IRQ %d: %d\n",
735 acpi_sci_irq, error);
736
737 acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE);
738 }
739
740 acpi_enable_wakeup_devices(ACPI_STATE_S0);
741
742 /* Change the configuration of GPEs to avoid spurious wakeup. */
743 acpi_enable_all_wakeup_gpes();
744 acpi_os_wait_events_complete();
745
746 s2idle_wakeup = true;
747 return 0;
748}
749
750bool acpi_s2idle_wake(void)
751{
752 if (!acpi_sci_irq_valid())
753 return pm_wakeup_pending();
754
755 while (pm_wakeup_pending()) {
756 /*
757 * If IRQD_WAKEUP_ARMED is set for the SCI at this point, the
758 * SCI has not triggered while suspended, so bail out (the
759 * wakeup is pending anyway and the SCI is not the source of
760 * it).
761 */
762 if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) {
763 pm_pr_dbg("Wakeup unrelated to ACPI SCI\n");
764 return true;
765 }
766
767 /*
768 * If the status bit of any enabled fixed event is set, the
769 * wakeup is regarded as valid.
770 */
771 if (acpi_any_fixed_event_status_set()) {
772 pm_pr_dbg("ACPI fixed event wakeup\n");
773 return true;
774 }
775
776 /* Check wakeups from drivers sharing the SCI. */
777 if (acpi_check_wakeup_handlers()) {
778 pm_pr_dbg("ACPI custom handler wakeup\n");
779 return true;
780 }
781
782 /*
783 * Check non-EC GPE wakeups and if there are none, cancel the
784 * SCI-related wakeup and dispatch the EC GPE.
785 */
786 if (acpi_ec_dispatch_gpe()) {
787 pm_pr_dbg("ACPI non-EC GPE wakeup\n");
788 return true;
789 }
790
791 acpi_os_wait_events_complete();
792
793 /*
794 * The SCI is in the "suspended" state now and it cannot produce
795 * new wakeup events till the rearming below, so if any of them
796 * are pending here, they must be resulting from the processing
797 * of EC events above or coming from somewhere else.
798 */
799 if (pm_wakeup_pending()) {
800 pm_pr_dbg("Wakeup after ACPI Notify sync\n");
801 return true;
802 }
803
804 pm_pr_dbg("Rearming ACPI SCI for wakeup\n");
805
806 pm_wakeup_clear(acpi_sci_irq);
807 rearm_wake_irq(acpi_sci_irq);
808 }
809
810 return false;
811}
812
813void acpi_s2idle_restore(void)
814{
815 /*
816 * Drain pending events before restoring the working-state configuration
817 * of GPEs.
818 */
819 acpi_os_wait_events_complete(); /* synchronize GPE processing */
820 acpi_ec_flush_work(); /* flush the EC driver's workqueues */
821 acpi_os_wait_events_complete(); /* synchronize Notify handling */
822
823 s2idle_wakeup = false;
824
825 acpi_enable_all_runtime_gpes();
826
827 acpi_disable_wakeup_devices(ACPI_STATE_S0);
828
829 if (acpi_sci_irq_valid()) {
830 acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE);
831 disable_irq_wake(acpi_sci_irq);
832 }
833}
834
835void acpi_s2idle_end(void)
836{
837 acpi_scan_lock_release();
838}
839
840static const struct platform_s2idle_ops acpi_s2idle_ops = {
841 .begin = acpi_s2idle_begin,
842 .prepare = acpi_s2idle_prepare,
843 .wake = acpi_s2idle_wake,
844 .restore = acpi_s2idle_restore,
845 .end = acpi_s2idle_end,
846};
847
848void __weak acpi_s2idle_setup(void)
849{
850 if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)
851 pr_info("Efficient low-power S0 idle declared\n");
852
853 s2idle_set_ops(&acpi_s2idle_ops);
854}
855
856static void __init acpi_sleep_suspend_setup(void)
857{
858 bool suspend_ops_needed = false;
859 int i;
860
861 for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
862 if (acpi_sleep_state_supported(i)) {
863 sleep_states[i] = 1;
864 suspend_ops_needed = true;
865 }
866
867 if (suspend_ops_needed)
868 suspend_set_ops(old_suspend_ordering ?
869 &acpi_suspend_ops_old : &acpi_suspend_ops);
870
871 acpi_s2idle_setup();
872}
873
874#else /* !CONFIG_SUSPEND */
875#define s2idle_wakeup (false)
876static inline void acpi_sleep_suspend_setup(void) {}
877#endif /* !CONFIG_SUSPEND */
878
879bool acpi_s2idle_wakeup(void)
880{
881 return s2idle_wakeup;
882}
883
884#ifdef CONFIG_PM_SLEEP
885static u32 saved_bm_rld;
886
887static int acpi_save_bm_rld(void)
888{
889 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
890 return 0;
891}
892
893static void acpi_restore_bm_rld(void)
894{
895 u32 resumed_bm_rld = 0;
896
897 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
898 if (resumed_bm_rld == saved_bm_rld)
899 return;
900
901 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
902}
903
904static struct syscore_ops acpi_sleep_syscore_ops = {
905 .suspend = acpi_save_bm_rld,
906 .resume = acpi_restore_bm_rld,
907};
908
909static void acpi_sleep_syscore_init(void)
910{
911 register_syscore_ops(&acpi_sleep_syscore_ops);
912}
913#else
914static inline void acpi_sleep_syscore_init(void) {}
915#endif /* CONFIG_PM_SLEEP */
916
917#ifdef CONFIG_HIBERNATION
918static unsigned long s4_hardware_signature;
919static struct acpi_table_facs *facs;
920int acpi_check_s4_hw_signature = -1; /* Default behaviour is just to warn */
921
922static int acpi_hibernation_begin(pm_message_t stage)
923{
924 if (!nvs_nosave) {
925 int error = suspend_nvs_alloc();
926 if (error)
927 return error;
928 }
929
930 if (stage.event == PM_EVENT_HIBERNATE)
931 pm_set_suspend_via_firmware();
932
933 acpi_pm_start(ACPI_STATE_S4);
934 return 0;
935}
936
937static int acpi_hibernation_enter(void)
938{
939 acpi_status status = AE_OK;
940
941 /* This shouldn't return. If it returns, we have a problem */
942 status = acpi_enter_sleep_state(ACPI_STATE_S4);
943 /* Reprogram control registers */
944 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
945
946 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
947}
948
949static void acpi_hibernation_leave(void)
950{
951 pm_set_resume_via_firmware();
952 /*
953 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
954 * enable it here.
955 */
956 acpi_enable();
957 /* Reprogram control registers */
958 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
959 /* Check the hardware signature */
960 if (facs && s4_hardware_signature != facs->hardware_signature)
961 pr_crit("Hardware changed while hibernated, success doubtful!\n");
962 /* Restore the NVS memory area */
963 suspend_nvs_restore();
964 /* Allow EC transactions to happen. */
965 acpi_ec_unblock_transactions();
966}
967
968static void acpi_pm_thaw(void)
969{
970 acpi_ec_unblock_transactions();
971 acpi_enable_all_runtime_gpes();
972}
973
974static const struct platform_hibernation_ops acpi_hibernation_ops = {
975 .begin = acpi_hibernation_begin,
976 .end = acpi_pm_end,
977 .pre_snapshot = acpi_pm_prepare,
978 .finish = acpi_pm_finish,
979 .prepare = acpi_pm_prepare,
980 .enter = acpi_hibernation_enter,
981 .leave = acpi_hibernation_leave,
982 .pre_restore = acpi_pm_freeze,
983 .restore_cleanup = acpi_pm_thaw,
984};
985
986/**
987 * acpi_hibernation_begin_old - Set the target system sleep state to
988 * ACPI_STATE_S4 and execute the _PTS control method. This
989 * function is used if the pre-ACPI 2.0 suspend ordering has been
990 * requested.
991 * @stage: The power management event message.
992 */
993static int acpi_hibernation_begin_old(pm_message_t stage)
994{
995 int error;
996 /*
997 * The _TTS object should always be evaluated before the _PTS object.
998 * When the old_suspended_ordering is true, the _PTS object is
999 * evaluated in the acpi_sleep_prepare.
1000 */
1001 acpi_sleep_tts_switch(ACPI_STATE_S4);
1002
1003 error = acpi_sleep_prepare(ACPI_STATE_S4);
1004 if (error)
1005 return error;
1006
1007 if (!nvs_nosave) {
1008 error = suspend_nvs_alloc();
1009 if (error)
1010 return error;
1011 }
1012
1013 if (stage.event == PM_EVENT_HIBERNATE)
1014 pm_set_suspend_via_firmware();
1015
1016 acpi_target_sleep_state = ACPI_STATE_S4;
1017 acpi_scan_lock_acquire();
1018 return 0;
1019}
1020
1021/*
1022 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
1023 * been requested.
1024 */
1025static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
1026 .begin = acpi_hibernation_begin_old,
1027 .end = acpi_pm_end,
1028 .pre_snapshot = acpi_pm_pre_suspend,
1029 .prepare = acpi_pm_freeze,
1030 .finish = acpi_pm_finish,
1031 .enter = acpi_hibernation_enter,
1032 .leave = acpi_hibernation_leave,
1033 .pre_restore = acpi_pm_freeze,
1034 .restore_cleanup = acpi_pm_thaw,
1035 .recover = acpi_pm_finish,
1036};
1037
1038static void acpi_sleep_hibernate_setup(void)
1039{
1040 if (!acpi_sleep_state_supported(ACPI_STATE_S4))
1041 return;
1042
1043 hibernation_set_ops(old_suspend_ordering ?
1044 &acpi_hibernation_ops_old : &acpi_hibernation_ops);
1045 sleep_states[ACPI_STATE_S4] = 1;
1046 if (!acpi_check_s4_hw_signature)
1047 return;
1048
1049 acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
1050 if (facs) {
1051 /*
1052 * s4_hardware_signature is the local variable which is just
1053 * used to warn about mismatch after we're attempting to
1054 * resume (in violation of the ACPI specification.)
1055 */
1056 s4_hardware_signature = facs->hardware_signature;
1057
1058 if (acpi_check_s4_hw_signature > 0) {
1059 /*
1060 * If we're actually obeying the ACPI specification
1061 * then the signature is written out as part of the
1062 * swsusp header, in order to allow the boot kernel
1063 * to gracefully decline to resume.
1064 */
1065 swsusp_hardware_signature = facs->hardware_signature;
1066 }
1067 }
1068}
1069#else /* !CONFIG_HIBERNATION */
1070static inline void acpi_sleep_hibernate_setup(void) {}
1071#endif /* !CONFIG_HIBERNATION */
1072
1073static int acpi_power_off_prepare(struct sys_off_data *data)
1074{
1075 /* Prepare to power off the system */
1076 acpi_sleep_prepare(ACPI_STATE_S5);
1077 acpi_disable_all_gpes();
1078 acpi_os_wait_events_complete();
1079 return NOTIFY_DONE;
1080}
1081
1082static int acpi_power_off(struct sys_off_data *data)
1083{
1084 /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
1085 pr_debug("%s called\n", __func__);
1086 local_irq_disable();
1087 acpi_enter_sleep_state(ACPI_STATE_S5);
1088 return NOTIFY_DONE;
1089}
1090
1091int __init acpi_sleep_init(void)
1092{
1093 char supported[ACPI_S_STATE_COUNT * 3 + 1];
1094 char *pos = supported;
1095 int i;
1096
1097 acpi_sleep_dmi_check();
1098
1099 sleep_states[ACPI_STATE_S0] = 1;
1100
1101 acpi_sleep_syscore_init();
1102 acpi_sleep_suspend_setup();
1103 acpi_sleep_hibernate_setup();
1104
1105 if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
1106 sleep_states[ACPI_STATE_S5] = 1;
1107
1108 register_sys_off_handler(SYS_OFF_MODE_POWER_OFF_PREPARE,
1109 SYS_OFF_PRIO_FIRMWARE,
1110 acpi_power_off_prepare, NULL);
1111
1112 register_sys_off_handler(SYS_OFF_MODE_POWER_OFF,
1113 SYS_OFF_PRIO_FIRMWARE,
1114 acpi_power_off, NULL);
1115
1116 /*
1117 * Windows uses S5 for reboot, so some BIOSes depend on it to
1118 * perform proper reboot.
1119 */
1120 register_sys_off_handler(SYS_OFF_MODE_RESTART_PREPARE,
1121 SYS_OFF_PRIO_FIRMWARE,
1122 acpi_power_off_prepare, NULL);
1123 } else {
1124 acpi_no_s5 = true;
1125 }
1126
1127 supported[0] = 0;
1128 for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
1129 if (sleep_states[i])
1130 pos += sprintf(pos, " S%d", i);
1131 }
1132 pr_info("(supports%s)\n", supported);
1133
1134 /*
1135 * Register the tts_notifier to reboot notifier list so that the _TTS
1136 * object can also be evaluated when the system enters S5.
1137 */
1138 register_reboot_notifier(&tts_notifier);
1139 return 0;
1140}
1/*
2 * sleep.c - ACPI sleep support.
3 *
4 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
5 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
6 * Copyright (c) 2000-2003 Patrick Mochel
7 * Copyright (c) 2003 Open Source Development Lab
8 *
9 * This file is released under the GPLv2.
10 *
11 */
12
13#include <linux/delay.h>
14#include <linux/irq.h>
15#include <linux/dmi.h>
16#include <linux/device.h>
17#include <linux/suspend.h>
18#include <linux/reboot.h>
19#include <linux/acpi.h>
20#include <linux/module.h>
21#include <asm/io.h>
22
23#include "internal.h"
24#include "sleep.h"
25
26static u8 sleep_states[ACPI_S_STATE_COUNT];
27
28static void acpi_sleep_tts_switch(u32 acpi_state)
29{
30 acpi_status status;
31
32 status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
33 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
34 /*
35 * OS can't evaluate the _TTS object correctly. Some warning
36 * message will be printed. But it won't break anything.
37 */
38 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
39 }
40}
41
42static int tts_notify_reboot(struct notifier_block *this,
43 unsigned long code, void *x)
44{
45 acpi_sleep_tts_switch(ACPI_STATE_S5);
46 return NOTIFY_DONE;
47}
48
49static struct notifier_block tts_notifier = {
50 .notifier_call = tts_notify_reboot,
51 .next = NULL,
52 .priority = 0,
53};
54
55static int acpi_sleep_prepare(u32 acpi_state)
56{
57#ifdef CONFIG_ACPI_SLEEP
58 /* do we have a wakeup address for S2 and S3? */
59 if (acpi_state == ACPI_STATE_S3) {
60 if (!acpi_wakeup_address)
61 return -EFAULT;
62 acpi_set_firmware_waking_vector(acpi_wakeup_address);
63
64 }
65 ACPI_FLUSH_CPU_CACHE();
66#endif
67 printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
68 acpi_state);
69 acpi_enable_wakeup_devices(acpi_state);
70 acpi_enter_sleep_state_prep(acpi_state);
71 return 0;
72}
73
74static bool acpi_sleep_state_supported(u8 sleep_state)
75{
76 acpi_status status;
77 u8 type_a, type_b;
78
79 status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
80 return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
81 || (acpi_gbl_FADT.sleep_control.address
82 && acpi_gbl_FADT.sleep_status.address));
83}
84
85#ifdef CONFIG_ACPI_SLEEP
86static u32 acpi_target_sleep_state = ACPI_STATE_S0;
87
88u32 acpi_target_system_state(void)
89{
90 return acpi_target_sleep_state;
91}
92
93static bool pwr_btn_event_pending;
94
95/*
96 * The ACPI specification wants us to save NVS memory regions during hibernation
97 * and to restore them during the subsequent resume. Windows does that also for
98 * suspend to RAM. However, it is known that this mechanism does not work on
99 * all machines, so we allow the user to disable it with the help of the
100 * 'acpi_sleep=nonvs' kernel command line option.
101 */
102static bool nvs_nosave;
103
104void __init acpi_nvs_nosave(void)
105{
106 nvs_nosave = true;
107}
108
109/*
110 * The ACPI specification wants us to save NVS memory regions during hibernation
111 * but says nothing about saving NVS during S3. Not all versions of Windows
112 * save NVS on S3 suspend either, and it is clear that not all systems need
113 * NVS to be saved at S3 time. To improve suspend/resume time, allow the
114 * user to disable saving NVS on S3 if their system does not require it, but
115 * continue to save/restore NVS for S4 as specified.
116 */
117static bool nvs_nosave_s3;
118
119void __init acpi_nvs_nosave_s3(void)
120{
121 nvs_nosave_s3 = true;
122}
123
124/*
125 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
126 * user to request that behavior by using the 'acpi_old_suspend_ordering'
127 * kernel command line option that causes the following variable to be set.
128 */
129static bool old_suspend_ordering;
130
131void __init acpi_old_suspend_ordering(void)
132{
133 old_suspend_ordering = true;
134}
135
136static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
137{
138 acpi_old_suspend_ordering();
139 return 0;
140}
141
142static int __init init_nvs_nosave(const struct dmi_system_id *d)
143{
144 acpi_nvs_nosave();
145 return 0;
146}
147
148static struct dmi_system_id acpisleep_dmi_table[] __initdata = {
149 {
150 .callback = init_old_suspend_ordering,
151 .ident = "Abit KN9 (nForce4 variant)",
152 .matches = {
153 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
154 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
155 },
156 },
157 {
158 .callback = init_old_suspend_ordering,
159 .ident = "HP xw4600 Workstation",
160 .matches = {
161 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
162 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
163 },
164 },
165 {
166 .callback = init_old_suspend_ordering,
167 .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
168 .matches = {
169 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
170 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
171 },
172 },
173 {
174 .callback = init_old_suspend_ordering,
175 .ident = "Panasonic CF51-2L",
176 .matches = {
177 DMI_MATCH(DMI_BOARD_VENDOR,
178 "Matsushita Electric Industrial Co.,Ltd."),
179 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
180 },
181 },
182 {
183 .callback = init_nvs_nosave,
184 .ident = "Sony Vaio VGN-FW41E_H",
185 .matches = {
186 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
187 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
188 },
189 },
190 {
191 .callback = init_nvs_nosave,
192 .ident = "Sony Vaio VGN-FW21E",
193 .matches = {
194 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
195 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
196 },
197 },
198 {
199 .callback = init_nvs_nosave,
200 .ident = "Sony Vaio VGN-FW21M",
201 .matches = {
202 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
203 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
204 },
205 },
206 {
207 .callback = init_nvs_nosave,
208 .ident = "Sony Vaio VPCEB17FX",
209 .matches = {
210 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
211 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
212 },
213 },
214 {
215 .callback = init_nvs_nosave,
216 .ident = "Sony Vaio VGN-SR11M",
217 .matches = {
218 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
219 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
220 },
221 },
222 {
223 .callback = init_nvs_nosave,
224 .ident = "Everex StepNote Series",
225 .matches = {
226 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
227 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
228 },
229 },
230 {
231 .callback = init_nvs_nosave,
232 .ident = "Sony Vaio VPCEB1Z1E",
233 .matches = {
234 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
235 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
236 },
237 },
238 {
239 .callback = init_nvs_nosave,
240 .ident = "Sony Vaio VGN-NW130D",
241 .matches = {
242 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
243 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
244 },
245 },
246 {
247 .callback = init_nvs_nosave,
248 .ident = "Sony Vaio VPCCW29FX",
249 .matches = {
250 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
251 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
252 },
253 },
254 {
255 .callback = init_nvs_nosave,
256 .ident = "Averatec AV1020-ED2",
257 .matches = {
258 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
259 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
260 },
261 },
262 {
263 .callback = init_old_suspend_ordering,
264 .ident = "Asus A8N-SLI DELUXE",
265 .matches = {
266 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
267 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
268 },
269 },
270 {
271 .callback = init_old_suspend_ordering,
272 .ident = "Asus A8N-SLI Premium",
273 .matches = {
274 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
275 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
276 },
277 },
278 {
279 .callback = init_nvs_nosave,
280 .ident = "Sony Vaio VGN-SR26GN_P",
281 .matches = {
282 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
283 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
284 },
285 },
286 {
287 .callback = init_nvs_nosave,
288 .ident = "Sony Vaio VPCEB1S1E",
289 .matches = {
290 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
291 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
292 },
293 },
294 {
295 .callback = init_nvs_nosave,
296 .ident = "Sony Vaio VGN-FW520F",
297 .matches = {
298 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
299 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
300 },
301 },
302 {
303 .callback = init_nvs_nosave,
304 .ident = "Asus K54C",
305 .matches = {
306 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
307 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
308 },
309 },
310 {
311 .callback = init_nvs_nosave,
312 .ident = "Asus K54HR",
313 .matches = {
314 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
315 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
316 },
317 },
318 {},
319};
320
321static void acpi_sleep_dmi_check(void)
322{
323 dmi_check_system(acpisleep_dmi_table);
324}
325
326/**
327 * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
328 */
329static int acpi_pm_freeze(void)
330{
331 acpi_disable_all_gpes();
332 acpi_os_wait_events_complete();
333 acpi_ec_block_transactions();
334 return 0;
335}
336
337/**
338 * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
339 */
340static int acpi_pm_pre_suspend(void)
341{
342 acpi_pm_freeze();
343 return suspend_nvs_save();
344}
345
346/**
347 * __acpi_pm_prepare - Prepare the platform to enter the target state.
348 *
349 * If necessary, set the firmware waking vector and do arch-specific
350 * nastiness to get the wakeup code to the waking vector.
351 */
352static int __acpi_pm_prepare(void)
353{
354 int error = acpi_sleep_prepare(acpi_target_sleep_state);
355 if (error)
356 acpi_target_sleep_state = ACPI_STATE_S0;
357
358 return error;
359}
360
361/**
362 * acpi_pm_prepare - Prepare the platform to enter the target sleep
363 * state and disable the GPEs.
364 */
365static int acpi_pm_prepare(void)
366{
367 int error = __acpi_pm_prepare();
368 if (!error)
369 error = acpi_pm_pre_suspend();
370
371 return error;
372}
373
374static int find_powerf_dev(struct device *dev, void *data)
375{
376 struct acpi_device *device = to_acpi_device(dev);
377 const char *hid = acpi_device_hid(device);
378
379 return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
380}
381
382/**
383 * acpi_pm_finish - Instruct the platform to leave a sleep state.
384 *
385 * This is called after we wake back up (or if entering the sleep state
386 * failed).
387 */
388static void acpi_pm_finish(void)
389{
390 struct device *pwr_btn_dev;
391 u32 acpi_state = acpi_target_sleep_state;
392
393 acpi_ec_unblock_transactions();
394 suspend_nvs_free();
395
396 if (acpi_state == ACPI_STATE_S0)
397 return;
398
399 printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
400 acpi_state);
401 acpi_disable_wakeup_devices(acpi_state);
402 acpi_leave_sleep_state(acpi_state);
403
404 /* reset firmware waking vector */
405 acpi_set_firmware_waking_vector((acpi_physical_address) 0);
406
407 acpi_target_sleep_state = ACPI_STATE_S0;
408
409 acpi_resume_power_resources();
410
411 /* If we were woken with the fixed power button, provide a small
412 * hint to userspace in the form of a wakeup event on the fixed power
413 * button device (if it can be found).
414 *
415 * We delay the event generation til now, as the PM layer requires
416 * timekeeping to be running before we generate events. */
417 if (!pwr_btn_event_pending)
418 return;
419
420 pwr_btn_event_pending = false;
421 pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
422 find_powerf_dev);
423 if (pwr_btn_dev) {
424 pm_wakeup_event(pwr_btn_dev, 0);
425 put_device(pwr_btn_dev);
426 }
427}
428
429/**
430 * acpi_pm_start - Start system PM transition.
431 */
432static void acpi_pm_start(u32 acpi_state)
433{
434 acpi_target_sleep_state = acpi_state;
435 acpi_sleep_tts_switch(acpi_target_sleep_state);
436 acpi_scan_lock_acquire();
437}
438
439/**
440 * acpi_pm_end - Finish up system PM transition.
441 */
442static void acpi_pm_end(void)
443{
444 acpi_scan_lock_release();
445 /*
446 * This is necessary in case acpi_pm_finish() is not called during a
447 * failing transition to a sleep state.
448 */
449 acpi_target_sleep_state = ACPI_STATE_S0;
450 acpi_sleep_tts_switch(acpi_target_sleep_state);
451}
452#else /* !CONFIG_ACPI_SLEEP */
453#define acpi_target_sleep_state ACPI_STATE_S0
454static inline void acpi_sleep_dmi_check(void) {}
455#endif /* CONFIG_ACPI_SLEEP */
456
457#ifdef CONFIG_SUSPEND
458static u32 acpi_suspend_states[] = {
459 [PM_SUSPEND_ON] = ACPI_STATE_S0,
460 [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
461 [PM_SUSPEND_MEM] = ACPI_STATE_S3,
462 [PM_SUSPEND_MAX] = ACPI_STATE_S5
463};
464
465/**
466 * acpi_suspend_begin - Set the target system sleep state to the state
467 * associated with given @pm_state, if supported.
468 */
469static int acpi_suspend_begin(suspend_state_t pm_state)
470{
471 u32 acpi_state = acpi_suspend_states[pm_state];
472 int error;
473
474 error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
475 if (error)
476 return error;
477
478 if (!sleep_states[acpi_state]) {
479 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
480 return -ENOSYS;
481 }
482
483 acpi_pm_start(acpi_state);
484 return 0;
485}
486
487/**
488 * acpi_suspend_enter - Actually enter a sleep state.
489 * @pm_state: ignored
490 *
491 * Flush caches and go to sleep. For STR we have to call arch-specific
492 * assembly, which in turn call acpi_enter_sleep_state().
493 * It's unfortunate, but it works. Please fix if you're feeling frisky.
494 */
495static int acpi_suspend_enter(suspend_state_t pm_state)
496{
497 acpi_status status = AE_OK;
498 u32 acpi_state = acpi_target_sleep_state;
499 int error;
500
501 ACPI_FLUSH_CPU_CACHE();
502
503 switch (acpi_state) {
504 case ACPI_STATE_S1:
505 barrier();
506 status = acpi_enter_sleep_state(acpi_state);
507 break;
508
509 case ACPI_STATE_S3:
510 if (!acpi_suspend_lowlevel)
511 return -ENOSYS;
512 error = acpi_suspend_lowlevel();
513 if (error)
514 return error;
515 pr_info(PREFIX "Low-level resume complete\n");
516 break;
517 }
518
519 /* This violates the spec but is required for bug compatibility. */
520 acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
521
522 /* Reprogram control registers */
523 acpi_leave_sleep_state_prep(acpi_state);
524
525 /* ACPI 3.0 specs (P62) says that it's the responsibility
526 * of the OSPM to clear the status bit [ implying that the
527 * POWER_BUTTON event should not reach userspace ]
528 *
529 * However, we do generate a small hint for userspace in the form of
530 * a wakeup event. We flag this condition for now and generate the
531 * event later, as we're currently too early in resume to be able to
532 * generate wakeup events.
533 */
534 if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
535 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
536
537 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
538
539 if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
540 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
541 /* Flag for later */
542 pwr_btn_event_pending = true;
543 }
544 }
545
546 /*
547 * Disable and clear GPE status before interrupt is enabled. Some GPEs
548 * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
549 * acpi_leave_sleep_state will reenable specific GPEs later
550 */
551 acpi_disable_all_gpes();
552 /* Allow EC transactions to happen. */
553 acpi_ec_unblock_transactions_early();
554
555 suspend_nvs_restore();
556
557 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
558}
559
560static int acpi_suspend_state_valid(suspend_state_t pm_state)
561{
562 u32 acpi_state;
563
564 switch (pm_state) {
565 case PM_SUSPEND_ON:
566 case PM_SUSPEND_STANDBY:
567 case PM_SUSPEND_MEM:
568 acpi_state = acpi_suspend_states[pm_state];
569
570 return sleep_states[acpi_state];
571 default:
572 return 0;
573 }
574}
575
576static const struct platform_suspend_ops acpi_suspend_ops = {
577 .valid = acpi_suspend_state_valid,
578 .begin = acpi_suspend_begin,
579 .prepare_late = acpi_pm_prepare,
580 .enter = acpi_suspend_enter,
581 .wake = acpi_pm_finish,
582 .end = acpi_pm_end,
583};
584
585/**
586 * acpi_suspend_begin_old - Set the target system sleep state to the
587 * state associated with given @pm_state, if supported, and
588 * execute the _PTS control method. This function is used if the
589 * pre-ACPI 2.0 suspend ordering has been requested.
590 */
591static int acpi_suspend_begin_old(suspend_state_t pm_state)
592{
593 int error = acpi_suspend_begin(pm_state);
594 if (!error)
595 error = __acpi_pm_prepare();
596
597 return error;
598}
599
600/*
601 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
602 * been requested.
603 */
604static const struct platform_suspend_ops acpi_suspend_ops_old = {
605 .valid = acpi_suspend_state_valid,
606 .begin = acpi_suspend_begin_old,
607 .prepare_late = acpi_pm_pre_suspend,
608 .enter = acpi_suspend_enter,
609 .wake = acpi_pm_finish,
610 .end = acpi_pm_end,
611 .recover = acpi_pm_finish,
612};
613
614static void acpi_sleep_suspend_setup(void)
615{
616 int i;
617
618 for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
619 if (acpi_sleep_state_supported(i))
620 sleep_states[i] = 1;
621
622 suspend_set_ops(old_suspend_ordering ?
623 &acpi_suspend_ops_old : &acpi_suspend_ops);
624}
625#else /* !CONFIG_SUSPEND */
626static inline void acpi_sleep_suspend_setup(void) {}
627#endif /* !CONFIG_SUSPEND */
628
629#ifdef CONFIG_HIBERNATION
630static unsigned long s4_hardware_signature;
631static struct acpi_table_facs *facs;
632static bool nosigcheck;
633
634void __init acpi_no_s4_hw_signature(void)
635{
636 nosigcheck = true;
637}
638
639static int acpi_hibernation_begin(void)
640{
641 int error;
642
643 error = nvs_nosave ? 0 : suspend_nvs_alloc();
644 if (!error)
645 acpi_pm_start(ACPI_STATE_S4);
646
647 return error;
648}
649
650static int acpi_hibernation_enter(void)
651{
652 acpi_status status = AE_OK;
653
654 ACPI_FLUSH_CPU_CACHE();
655
656 /* This shouldn't return. If it returns, we have a problem */
657 status = acpi_enter_sleep_state(ACPI_STATE_S4);
658 /* Reprogram control registers */
659 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
660
661 return ACPI_SUCCESS(status) ? 0 : -EFAULT;
662}
663
664static void acpi_hibernation_leave(void)
665{
666 /*
667 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
668 * enable it here.
669 */
670 acpi_enable();
671 /* Reprogram control registers */
672 acpi_leave_sleep_state_prep(ACPI_STATE_S4);
673 /* Check the hardware signature */
674 if (facs && s4_hardware_signature != facs->hardware_signature)
675 pr_crit("ACPI: Hardware changed while hibernated, success doubtful!\n");
676 /* Restore the NVS memory area */
677 suspend_nvs_restore();
678 /* Allow EC transactions to happen. */
679 acpi_ec_unblock_transactions_early();
680}
681
682static void acpi_pm_thaw(void)
683{
684 acpi_ec_unblock_transactions();
685 acpi_enable_all_runtime_gpes();
686}
687
688static const struct platform_hibernation_ops acpi_hibernation_ops = {
689 .begin = acpi_hibernation_begin,
690 .end = acpi_pm_end,
691 .pre_snapshot = acpi_pm_prepare,
692 .finish = acpi_pm_finish,
693 .prepare = acpi_pm_prepare,
694 .enter = acpi_hibernation_enter,
695 .leave = acpi_hibernation_leave,
696 .pre_restore = acpi_pm_freeze,
697 .restore_cleanup = acpi_pm_thaw,
698};
699
700/**
701 * acpi_hibernation_begin_old - Set the target system sleep state to
702 * ACPI_STATE_S4 and execute the _PTS control method. This
703 * function is used if the pre-ACPI 2.0 suspend ordering has been
704 * requested.
705 */
706static int acpi_hibernation_begin_old(void)
707{
708 int error;
709 /*
710 * The _TTS object should always be evaluated before the _PTS object.
711 * When the old_suspended_ordering is true, the _PTS object is
712 * evaluated in the acpi_sleep_prepare.
713 */
714 acpi_sleep_tts_switch(ACPI_STATE_S4);
715
716 error = acpi_sleep_prepare(ACPI_STATE_S4);
717
718 if (!error) {
719 if (!nvs_nosave)
720 error = suspend_nvs_alloc();
721 if (!error) {
722 acpi_target_sleep_state = ACPI_STATE_S4;
723 acpi_scan_lock_acquire();
724 }
725 }
726 return error;
727}
728
729/*
730 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
731 * been requested.
732 */
733static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
734 .begin = acpi_hibernation_begin_old,
735 .end = acpi_pm_end,
736 .pre_snapshot = acpi_pm_pre_suspend,
737 .prepare = acpi_pm_freeze,
738 .finish = acpi_pm_finish,
739 .enter = acpi_hibernation_enter,
740 .leave = acpi_hibernation_leave,
741 .pre_restore = acpi_pm_freeze,
742 .restore_cleanup = acpi_pm_thaw,
743 .recover = acpi_pm_finish,
744};
745
746static void acpi_sleep_hibernate_setup(void)
747{
748 if (!acpi_sleep_state_supported(ACPI_STATE_S4))
749 return;
750
751 hibernation_set_ops(old_suspend_ordering ?
752 &acpi_hibernation_ops_old : &acpi_hibernation_ops);
753 sleep_states[ACPI_STATE_S4] = 1;
754 if (nosigcheck)
755 return;
756
757 acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
758 if (facs)
759 s4_hardware_signature = facs->hardware_signature;
760}
761#else /* !CONFIG_HIBERNATION */
762static inline void acpi_sleep_hibernate_setup(void) {}
763#endif /* !CONFIG_HIBERNATION */
764
765int acpi_suspend(u32 acpi_state)
766{
767 suspend_state_t states[] = {
768 [1] = PM_SUSPEND_STANDBY,
769 [3] = PM_SUSPEND_MEM,
770 [5] = PM_SUSPEND_MAX
771 };
772
773 if (acpi_state < 6 && states[acpi_state])
774 return pm_suspend(states[acpi_state]);
775 if (acpi_state == 4)
776 return hibernate();
777 return -EINVAL;
778}
779
780static void acpi_power_off_prepare(void)
781{
782 /* Prepare to power off the system */
783 acpi_sleep_prepare(ACPI_STATE_S5);
784 acpi_disable_all_gpes();
785}
786
787static void acpi_power_off(void)
788{
789 /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
790 printk(KERN_DEBUG "%s called\n", __func__);
791 local_irq_disable();
792 acpi_enter_sleep_state(ACPI_STATE_S5);
793}
794
795int __init acpi_sleep_init(void)
796{
797 char supported[ACPI_S_STATE_COUNT * 3 + 1];
798 char *pos = supported;
799 int i;
800
801 acpi_sleep_dmi_check();
802
803 sleep_states[ACPI_STATE_S0] = 1;
804
805 acpi_sleep_suspend_setup();
806 acpi_sleep_hibernate_setup();
807
808 if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
809 sleep_states[ACPI_STATE_S5] = 1;
810 pm_power_off_prepare = acpi_power_off_prepare;
811 pm_power_off = acpi_power_off;
812 }
813
814 supported[0] = 0;
815 for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
816 if (sleep_states[i])
817 pos += sprintf(pos, " S%d", i);
818 }
819 pr_info(PREFIX "(supports%s)\n", supported);
820
821 /*
822 * Register the tts_notifier to reboot notifier list so that the _TTS
823 * object can also be evaluated when the system enters S5.
824 */
825 register_reboot_notifier(&tts_notifier);
826 return 0;
827}