Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Real Time Clock (RTC) Driver for i.MX53
4 * Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
5 * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG
6 */
7
8#include <linux/clk.h>
9#include <linux/io.h>
10#include <linux/module.h>
11#include <linux/mod_devicetable.h>
12#include <linux/platform_device.h>
13#include <linux/pm_wakeirq.h>
14#include <linux/rtc.h>
15
16#define SRTC_LPPDR_INIT 0x41736166 /* init for glitch detect */
17
18#define SRTC_LPCR_EN_LP BIT(3) /* lp enable */
19#define SRTC_LPCR_WAE BIT(4) /* lp wakeup alarm enable */
20#define SRTC_LPCR_ALP BIT(7) /* lp alarm flag */
21#define SRTC_LPCR_NSA BIT(11) /* lp non secure access */
22#define SRTC_LPCR_NVE BIT(14) /* lp non valid state exit bit */
23#define SRTC_LPCR_IE BIT(15) /* lp init state exit bit */
24
25#define SRTC_LPSR_ALP BIT(3) /* lp alarm flag */
26#define SRTC_LPSR_NVES BIT(14) /* lp non-valid state exit status */
27#define SRTC_LPSR_IES BIT(15) /* lp init state exit status */
28
29#define SRTC_LPSCMR 0x00 /* LP Secure Counter MSB Reg */
30#define SRTC_LPSCLR 0x04 /* LP Secure Counter LSB Reg */
31#define SRTC_LPSAR 0x08 /* LP Secure Alarm Reg */
32#define SRTC_LPCR 0x10 /* LP Control Reg */
33#define SRTC_LPSR 0x14 /* LP Status Reg */
34#define SRTC_LPPDR 0x18 /* LP Power Supply Glitch Detector Reg */
35
36/* max. number of retries to read registers, 120 was max during test */
37#define REG_READ_TIMEOUT 2000
38
39struct mxc_rtc_data {
40 struct rtc_device *rtc;
41 void __iomem *ioaddr;
42 struct clk *clk;
43 spinlock_t lock; /* protects register access */
44 int irq;
45};
46
47/*
48 * This function does write synchronization for writes to the lp srtc block.
49 * To take care of the asynchronous CKIL clock, all writes from the IP domain
50 * will be synchronized to the CKIL domain.
51 * The caller should hold the pdata->lock
52 */
53static void mxc_rtc_sync_lp_locked(struct device *dev, void __iomem *ioaddr)
54{
55 unsigned int i;
56
57 /* Wait for 3 CKIL cycles */
58 for (i = 0; i < 3; i++) {
59 const u32 count = readl(ioaddr + SRTC_LPSCLR);
60 unsigned int timeout = REG_READ_TIMEOUT;
61
62 while ((readl(ioaddr + SRTC_LPSCLR)) == count) {
63 if (!--timeout) {
64 dev_err_once(dev, "SRTC_LPSCLR stuck! Check your hw.\n");
65 return;
66 }
67 }
68 }
69}
70
71/* This function is the RTC interrupt service routine. */
72static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
73{
74 struct device *dev = dev_id;
75 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
76 void __iomem *ioaddr = pdata->ioaddr;
77 unsigned long flags;
78 u32 lp_status;
79 u32 lp_cr;
80
81 spin_lock_irqsave(&pdata->lock, flags);
82 if (clk_enable(pdata->clk)) {
83 spin_unlock_irqrestore(&pdata->lock, flags);
84 return IRQ_NONE;
85 }
86
87 lp_status = readl(ioaddr + SRTC_LPSR);
88 lp_cr = readl(ioaddr + SRTC_LPCR);
89
90 /* update irq data & counter */
91 if (lp_status & SRTC_LPSR_ALP) {
92 if (lp_cr & SRTC_LPCR_ALP)
93 rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF);
94
95 /* disable further lp alarm interrupts */
96 lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
97 }
98
99 /* Update interrupt enables */
100 writel(lp_cr, ioaddr + SRTC_LPCR);
101
102 /* clear interrupt status */
103 writel(lp_status, ioaddr + SRTC_LPSR);
104
105 mxc_rtc_sync_lp_locked(dev, ioaddr);
106 clk_disable(pdata->clk);
107 spin_unlock_irqrestore(&pdata->lock, flags);
108 return IRQ_HANDLED;
109}
110
111/*
112 * Enable clk and aquire spinlock
113 * @return 0 if successful; non-zero otherwise.
114 */
115static int mxc_rtc_lock(struct mxc_rtc_data *const pdata)
116{
117 int ret;
118
119 spin_lock_irq(&pdata->lock);
120 ret = clk_enable(pdata->clk);
121 if (ret) {
122 spin_unlock_irq(&pdata->lock);
123 return ret;
124 }
125 return 0;
126}
127
128static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata)
129{
130 clk_disable(pdata->clk);
131 spin_unlock_irq(&pdata->lock);
132 return 0;
133}
134
135/*
136 * This function reads the current RTC time into tm in Gregorian date.
137 *
138 * @param tm contains the RTC time value upon return
139 *
140 * @return 0 if successful; non-zero otherwise.
141 */
142static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
143{
144 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
145 const int clk_failed = clk_enable(pdata->clk);
146
147 if (!clk_failed) {
148 const time64_t now = readl(pdata->ioaddr + SRTC_LPSCMR);
149
150 rtc_time64_to_tm(now, tm);
151 clk_disable(pdata->clk);
152 return 0;
153 }
154 return clk_failed;
155}
156
157/*
158 * This function sets the internal RTC time based on tm in Gregorian date.
159 *
160 * @param tm the time value to be set in the RTC
161 *
162 * @return 0 if successful; non-zero otherwise.
163 */
164static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
165{
166 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
167 time64_t time = rtc_tm_to_time64(tm);
168 int ret;
169
170 ret = mxc_rtc_lock(pdata);
171 if (ret)
172 return ret;
173
174 writel(time, pdata->ioaddr + SRTC_LPSCMR);
175 mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
176 return mxc_rtc_unlock(pdata);
177}
178
179/*
180 * This function reads the current alarm value into the passed in \b alrm
181 * argument. It updates the \b alrm's pending field value based on the whether
182 * an alarm interrupt occurs or not.
183 *
184 * @param alrm contains the RTC alarm value upon return
185 *
186 * @return 0 if successful; non-zero otherwise.
187 */
188static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
189{
190 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
191 void __iomem *ioaddr = pdata->ioaddr;
192 int ret;
193
194 ret = mxc_rtc_lock(pdata);
195 if (ret)
196 return ret;
197
198 rtc_time64_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time);
199 alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP);
200 return mxc_rtc_unlock(pdata);
201}
202
203/*
204 * Enable/Disable alarm interrupt
205 * The caller should hold the pdata->lock
206 */
207static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata,
208 unsigned int enable)
209{
210 u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR);
211
212 if (enable)
213 lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE);
214 else
215 lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
216
217 writel(lp_cr, pdata->ioaddr + SRTC_LPCR);
218}
219
220static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
221{
222 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
223 int ret = mxc_rtc_lock(pdata);
224
225 if (ret)
226 return ret;
227
228 mxc_rtc_alarm_irq_enable_locked(pdata, enable);
229 return mxc_rtc_unlock(pdata);
230}
231
232/*
233 * This function sets the RTC alarm based on passed in alrm.
234 *
235 * @param alrm the alarm value to be set in the RTC
236 *
237 * @return 0 if successful; non-zero otherwise.
238 */
239static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
240{
241 const time64_t time = rtc_tm_to_time64(&alrm->time);
242 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
243 int ret = mxc_rtc_lock(pdata);
244
245 if (ret)
246 return ret;
247
248 writel((u32)time, pdata->ioaddr + SRTC_LPSAR);
249
250 /* clear alarm interrupt status bit */
251 writel(SRTC_LPSR_ALP, pdata->ioaddr + SRTC_LPSR);
252 mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
253
254 mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled);
255 mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
256 mxc_rtc_unlock(pdata);
257 return ret;
258}
259
260static const struct rtc_class_ops mxc_rtc_ops = {
261 .read_time = mxc_rtc_read_time,
262 .set_time = mxc_rtc_set_time,
263 .read_alarm = mxc_rtc_read_alarm,
264 .set_alarm = mxc_rtc_set_alarm,
265 .alarm_irq_enable = mxc_rtc_alarm_irq_enable,
266};
267
268static int mxc_rtc_wait_for_flag(void __iomem *ioaddr, int flag)
269{
270 unsigned int timeout = REG_READ_TIMEOUT;
271
272 while (!(readl(ioaddr) & flag)) {
273 if (!--timeout)
274 return -EBUSY;
275 }
276 return 0;
277}
278
279static int mxc_rtc_probe(struct platform_device *pdev)
280{
281 struct mxc_rtc_data *pdata;
282 void __iomem *ioaddr;
283 int ret = 0;
284
285 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
286 if (!pdata)
287 return -ENOMEM;
288
289 pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0);
290 if (IS_ERR(pdata->ioaddr))
291 return PTR_ERR(pdata->ioaddr);
292
293 ioaddr = pdata->ioaddr;
294
295 pdata->clk = devm_clk_get(&pdev->dev, NULL);
296 if (IS_ERR(pdata->clk)) {
297 dev_err(&pdev->dev, "unable to get rtc clock!\n");
298 return PTR_ERR(pdata->clk);
299 }
300
301 spin_lock_init(&pdata->lock);
302 pdata->irq = platform_get_irq(pdev, 0);
303 if (pdata->irq < 0)
304 return pdata->irq;
305
306 device_init_wakeup(&pdev->dev, 1);
307 ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
308 if (ret)
309 dev_err(&pdev->dev, "failed to enable irq wake\n");
310
311 ret = clk_prepare_enable(pdata->clk);
312 if (ret)
313 return ret;
314 /* initialize glitch detect */
315 writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR);
316
317 /* clear lp interrupt status */
318 writel(0xFFFFFFFF, ioaddr + SRTC_LPSR);
319
320 /* move out of init state */
321 writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR);
322 ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES);
323 if (ret) {
324 dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_IES\n");
325 clk_disable_unprepare(pdata->clk);
326 return ret;
327 }
328
329 /* move out of non-valid state */
330 writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA |
331 SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR);
332 ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES);
333 if (ret) {
334 dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_NVES\n");
335 clk_disable_unprepare(pdata->clk);
336 return ret;
337 }
338
339 pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
340 if (IS_ERR(pdata->rtc))
341 return PTR_ERR(pdata->rtc);
342
343 pdata->rtc->ops = &mxc_rtc_ops;
344 pdata->rtc->range_max = U32_MAX;
345
346 clk_disable(pdata->clk);
347 platform_set_drvdata(pdev, pdata);
348 ret =
349 devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0,
350 pdev->name, &pdev->dev);
351 if (ret < 0) {
352 dev_err(&pdev->dev, "interrupt not available.\n");
353 clk_unprepare(pdata->clk);
354 return ret;
355 }
356
357 ret = rtc_register_device(pdata->rtc);
358 if (ret < 0)
359 clk_unprepare(pdata->clk);
360
361 return ret;
362}
363
364static int mxc_rtc_remove(struct platform_device *pdev)
365{
366 struct mxc_rtc_data *pdata = platform_get_drvdata(pdev);
367
368 clk_disable_unprepare(pdata->clk);
369 return 0;
370}
371
372static const struct of_device_id mxc_ids[] = {
373 { .compatible = "fsl,imx53-rtc", },
374 {}
375};
376
377static struct platform_driver mxc_rtc_driver = {
378 .driver = {
379 .name = "mxc_rtc_v2",
380 .of_match_table = mxc_ids,
381 },
382 .probe = mxc_rtc_probe,
383 .remove = mxc_rtc_remove,
384};
385
386module_platform_driver(mxc_rtc_driver);
387
388MODULE_AUTHOR("Freescale Semiconductor, Inc.");
389MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53");
390MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Real Time Clock (RTC) Driver for i.MX53
4 * Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
5 * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG
6 */
7
8#include <linux/clk.h>
9#include <linux/io.h>
10#include <linux/module.h>
11#include <linux/mod_devicetable.h>
12#include <linux/platform_device.h>
13#include <linux/pm_wakeirq.h>
14#include <linux/rtc.h>
15
16#define SRTC_LPPDR_INIT 0x41736166 /* init for glitch detect */
17
18#define SRTC_LPCR_EN_LP BIT(3) /* lp enable */
19#define SRTC_LPCR_WAE BIT(4) /* lp wakeup alarm enable */
20#define SRTC_LPCR_ALP BIT(7) /* lp alarm flag */
21#define SRTC_LPCR_NSA BIT(11) /* lp non secure access */
22#define SRTC_LPCR_NVE BIT(14) /* lp non valid state exit bit */
23#define SRTC_LPCR_IE BIT(15) /* lp init state exit bit */
24
25#define SRTC_LPSR_ALP BIT(3) /* lp alarm flag */
26#define SRTC_LPSR_NVES BIT(14) /* lp non-valid state exit status */
27#define SRTC_LPSR_IES BIT(15) /* lp init state exit status */
28
29#define SRTC_LPSCMR 0x00 /* LP Secure Counter MSB Reg */
30#define SRTC_LPSCLR 0x04 /* LP Secure Counter LSB Reg */
31#define SRTC_LPSAR 0x08 /* LP Secure Alarm Reg */
32#define SRTC_LPCR 0x10 /* LP Control Reg */
33#define SRTC_LPSR 0x14 /* LP Status Reg */
34#define SRTC_LPPDR 0x18 /* LP Power Supply Glitch Detector Reg */
35
36/* max. number of retries to read registers, 120 was max during test */
37#define REG_READ_TIMEOUT 2000
38
39struct mxc_rtc_data {
40 struct rtc_device *rtc;
41 void __iomem *ioaddr;
42 struct clk *clk;
43 spinlock_t lock; /* protects register access */
44 int irq;
45};
46
47/*
48 * This function does write synchronization for writes to the lp srtc block.
49 * To take care of the asynchronous CKIL clock, all writes from the IP domain
50 * will be synchronized to the CKIL domain.
51 * The caller should hold the pdata->lock
52 */
53static void mxc_rtc_sync_lp_locked(struct device *dev, void __iomem *ioaddr)
54{
55 unsigned int i;
56
57 /* Wait for 3 CKIL cycles */
58 for (i = 0; i < 3; i++) {
59 const u32 count = readl(ioaddr + SRTC_LPSCLR);
60 unsigned int timeout = REG_READ_TIMEOUT;
61
62 while ((readl(ioaddr + SRTC_LPSCLR)) == count) {
63 if (!--timeout) {
64 dev_err_once(dev, "SRTC_LPSCLR stuck! Check your hw.\n");
65 return;
66 }
67 }
68 }
69}
70
71/* This function is the RTC interrupt service routine. */
72static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
73{
74 struct device *dev = dev_id;
75 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
76 void __iomem *ioaddr = pdata->ioaddr;
77 u32 lp_status;
78 u32 lp_cr;
79
80 spin_lock(&pdata->lock);
81 if (clk_enable(pdata->clk)) {
82 spin_unlock(&pdata->lock);
83 return IRQ_NONE;
84 }
85
86 lp_status = readl(ioaddr + SRTC_LPSR);
87 lp_cr = readl(ioaddr + SRTC_LPCR);
88
89 /* update irq data & counter */
90 if (lp_status & SRTC_LPSR_ALP) {
91 if (lp_cr & SRTC_LPCR_ALP)
92 rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF);
93
94 /* disable further lp alarm interrupts */
95 lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
96 }
97
98 /* Update interrupt enables */
99 writel(lp_cr, ioaddr + SRTC_LPCR);
100
101 /* clear interrupt status */
102 writel(lp_status, ioaddr + SRTC_LPSR);
103
104 mxc_rtc_sync_lp_locked(dev, ioaddr);
105 clk_disable(pdata->clk);
106 spin_unlock(&pdata->lock);
107 return IRQ_HANDLED;
108}
109
110/*
111 * Enable clk and aquire spinlock
112 * @return 0 if successful; non-zero otherwise.
113 */
114static int mxc_rtc_lock(struct mxc_rtc_data *const pdata)
115{
116 int ret;
117
118 spin_lock_irq(&pdata->lock);
119 ret = clk_enable(pdata->clk);
120 if (ret) {
121 spin_unlock_irq(&pdata->lock);
122 return ret;
123 }
124 return 0;
125}
126
127static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata)
128{
129 clk_disable(pdata->clk);
130 spin_unlock_irq(&pdata->lock);
131 return 0;
132}
133
134/*
135 * This function reads the current RTC time into tm in Gregorian date.
136 *
137 * @param tm contains the RTC time value upon return
138 *
139 * @return 0 if successful; non-zero otherwise.
140 */
141static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
142{
143 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
144 const int clk_failed = clk_enable(pdata->clk);
145
146 if (!clk_failed) {
147 const time64_t now = readl(pdata->ioaddr + SRTC_LPSCMR);
148
149 rtc_time64_to_tm(now, tm);
150 clk_disable(pdata->clk);
151 return 0;
152 }
153 return clk_failed;
154}
155
156/*
157 * This function sets the internal RTC time based on tm in Gregorian date.
158 *
159 * @param tm the time value to be set in the RTC
160 *
161 * @return 0 if successful; non-zero otherwise.
162 */
163static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
164{
165 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
166 time64_t time = rtc_tm_to_time64(tm);
167 int ret;
168
169 ret = mxc_rtc_lock(pdata);
170 if (ret)
171 return ret;
172
173 writel(time, pdata->ioaddr + SRTC_LPSCMR);
174 mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
175 return mxc_rtc_unlock(pdata);
176}
177
178/*
179 * This function reads the current alarm value into the passed in \b alrm
180 * argument. It updates the \b alrm's pending field value based on the whether
181 * an alarm interrupt occurs or not.
182 *
183 * @param alrm contains the RTC alarm value upon return
184 *
185 * @return 0 if successful; non-zero otherwise.
186 */
187static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
188{
189 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
190 void __iomem *ioaddr = pdata->ioaddr;
191 int ret;
192
193 ret = mxc_rtc_lock(pdata);
194 if (ret)
195 return ret;
196
197 rtc_time64_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time);
198 alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP);
199 return mxc_rtc_unlock(pdata);
200}
201
202/*
203 * Enable/Disable alarm interrupt
204 * The caller should hold the pdata->lock
205 */
206static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata,
207 unsigned int enable)
208{
209 u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR);
210
211 if (enable)
212 lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE);
213 else
214 lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
215
216 writel(lp_cr, pdata->ioaddr + SRTC_LPCR);
217}
218
219static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
220{
221 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
222 int ret = mxc_rtc_lock(pdata);
223
224 if (ret)
225 return ret;
226
227 mxc_rtc_alarm_irq_enable_locked(pdata, enable);
228 return mxc_rtc_unlock(pdata);
229}
230
231/*
232 * This function sets the RTC alarm based on passed in alrm.
233 *
234 * @param alrm the alarm value to be set in the RTC
235 *
236 * @return 0 if successful; non-zero otherwise.
237 */
238static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
239{
240 const time64_t time = rtc_tm_to_time64(&alrm->time);
241 struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
242 int ret = mxc_rtc_lock(pdata);
243
244 if (ret)
245 return ret;
246
247 writel((u32)time, pdata->ioaddr + SRTC_LPSAR);
248
249 /* clear alarm interrupt status bit */
250 writel(SRTC_LPSR_ALP, pdata->ioaddr + SRTC_LPSR);
251 mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
252
253 mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled);
254 mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
255 mxc_rtc_unlock(pdata);
256 return ret;
257}
258
259static const struct rtc_class_ops mxc_rtc_ops = {
260 .read_time = mxc_rtc_read_time,
261 .set_time = mxc_rtc_set_time,
262 .read_alarm = mxc_rtc_read_alarm,
263 .set_alarm = mxc_rtc_set_alarm,
264 .alarm_irq_enable = mxc_rtc_alarm_irq_enable,
265};
266
267static int mxc_rtc_wait_for_flag(void __iomem *ioaddr, int flag)
268{
269 unsigned int timeout = REG_READ_TIMEOUT;
270
271 while (!(readl(ioaddr) & flag)) {
272 if (!--timeout)
273 return -EBUSY;
274 }
275 return 0;
276}
277
278static int mxc_rtc_probe(struct platform_device *pdev)
279{
280 struct mxc_rtc_data *pdata;
281 void __iomem *ioaddr;
282 int ret = 0;
283
284 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
285 if (!pdata)
286 return -ENOMEM;
287
288 pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0);
289 if (IS_ERR(pdata->ioaddr))
290 return PTR_ERR(pdata->ioaddr);
291
292 ioaddr = pdata->ioaddr;
293
294 pdata->clk = devm_clk_get(&pdev->dev, NULL);
295 if (IS_ERR(pdata->clk)) {
296 dev_err(&pdev->dev, "unable to get rtc clock!\n");
297 return PTR_ERR(pdata->clk);
298 }
299
300 spin_lock_init(&pdata->lock);
301 pdata->irq = platform_get_irq(pdev, 0);
302 if (pdata->irq < 0)
303 return pdata->irq;
304
305 device_init_wakeup(&pdev->dev, 1);
306 ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
307 if (ret)
308 dev_err(&pdev->dev, "failed to enable irq wake\n");
309
310 ret = clk_prepare_enable(pdata->clk);
311 if (ret)
312 return ret;
313 /* initialize glitch detect */
314 writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR);
315
316 /* clear lp interrupt status */
317 writel(0xFFFFFFFF, ioaddr + SRTC_LPSR);
318
319 /* move out of init state */
320 writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR);
321 ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES);
322 if (ret) {
323 dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_IES\n");
324 clk_disable_unprepare(pdata->clk);
325 return ret;
326 }
327
328 /* move out of non-valid state */
329 writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA |
330 SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR);
331 ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES);
332 if (ret) {
333 dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_NVES\n");
334 clk_disable_unprepare(pdata->clk);
335 return ret;
336 }
337
338 pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
339 if (IS_ERR(pdata->rtc)) {
340 clk_disable_unprepare(pdata->clk);
341 return PTR_ERR(pdata->rtc);
342 }
343
344 pdata->rtc->ops = &mxc_rtc_ops;
345 pdata->rtc->range_max = U32_MAX;
346
347 clk_disable(pdata->clk);
348 platform_set_drvdata(pdev, pdata);
349 ret =
350 devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0,
351 pdev->name, &pdev->dev);
352 if (ret < 0) {
353 dev_err(&pdev->dev, "interrupt not available.\n");
354 clk_unprepare(pdata->clk);
355 return ret;
356 }
357
358 ret = devm_rtc_register_device(pdata->rtc);
359 if (ret < 0)
360 clk_unprepare(pdata->clk);
361
362 return ret;
363}
364
365static void mxc_rtc_remove(struct platform_device *pdev)
366{
367 struct mxc_rtc_data *pdata = platform_get_drvdata(pdev);
368
369 clk_disable_unprepare(pdata->clk);
370}
371
372static const struct of_device_id mxc_ids[] = {
373 { .compatible = "fsl,imx53-rtc", },
374 {}
375};
376MODULE_DEVICE_TABLE(of, mxc_ids);
377
378static struct platform_driver mxc_rtc_driver = {
379 .driver = {
380 .name = "mxc_rtc_v2",
381 .of_match_table = mxc_ids,
382 },
383 .probe = mxc_rtc_probe,
384 .remove_new = mxc_rtc_remove,
385};
386
387module_platform_driver(mxc_rtc_driver);
388
389MODULE_AUTHOR("Freescale Semiconductor, Inc.");
390MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53");
391MODULE_LICENSE("GPL");