Linux Audio

Check our new training course

Loading...
v5.9
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Real Time Clock (RTC) Driver for i.MX53
  4 * Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
  5 * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG
  6 */
  7
  8#include <linux/clk.h>
  9#include <linux/io.h>
 10#include <linux/module.h>
 11#include <linux/mod_devicetable.h>
 12#include <linux/platform_device.h>
 13#include <linux/pm_wakeirq.h>
 14#include <linux/rtc.h>
 15
 16#define SRTC_LPPDR_INIT       0x41736166	/* init for glitch detect */
 17
 18#define SRTC_LPCR_EN_LP       BIT(3)	/* lp enable */
 19#define SRTC_LPCR_WAE         BIT(4)	/* lp wakeup alarm enable */
 20#define SRTC_LPCR_ALP         BIT(7)	/* lp alarm flag */
 21#define SRTC_LPCR_NSA         BIT(11)	/* lp non secure access */
 22#define SRTC_LPCR_NVE         BIT(14)	/* lp non valid state exit bit */
 23#define SRTC_LPCR_IE          BIT(15)	/* lp init state exit bit */
 24
 25#define SRTC_LPSR_ALP         BIT(3)	/* lp alarm flag */
 26#define SRTC_LPSR_NVES        BIT(14)	/* lp non-valid state exit status */
 27#define SRTC_LPSR_IES         BIT(15)	/* lp init state exit status */
 28
 29#define SRTC_LPSCMR	0x00	/* LP Secure Counter MSB Reg */
 30#define SRTC_LPSCLR	0x04	/* LP Secure Counter LSB Reg */
 31#define SRTC_LPSAR	0x08	/* LP Secure Alarm Reg */
 32#define SRTC_LPCR	0x10	/* LP Control Reg */
 33#define SRTC_LPSR	0x14	/* LP Status Reg */
 34#define SRTC_LPPDR	0x18	/* LP Power Supply Glitch Detector Reg */
 35
 36/* max. number of retries to read registers, 120 was max during test */
 37#define REG_READ_TIMEOUT 2000
 38
 39struct mxc_rtc_data {
 40	struct rtc_device *rtc;
 41	void __iomem *ioaddr;
 42	struct clk *clk;
 43	spinlock_t lock; /* protects register access */
 44	int irq;
 45};
 46
 47/*
 48 * This function does write synchronization for writes to the lp srtc block.
 49 * To take care of the asynchronous CKIL clock, all writes from the IP domain
 50 * will be synchronized to the CKIL domain.
 51 * The caller should hold the pdata->lock
 52 */
 53static void mxc_rtc_sync_lp_locked(struct device *dev, void __iomem *ioaddr)
 54{
 55	unsigned int i;
 56
 57	/* Wait for 3 CKIL cycles */
 58	for (i = 0; i < 3; i++) {
 59		const u32 count = readl(ioaddr + SRTC_LPSCLR);
 60		unsigned int timeout = REG_READ_TIMEOUT;
 61
 62		while ((readl(ioaddr + SRTC_LPSCLR)) == count) {
 63			if (!--timeout) {
 64				dev_err_once(dev, "SRTC_LPSCLR stuck! Check your hw.\n");
 65				return;
 66			}
 67		}
 68	}
 69}
 70
 71/* This function is the RTC interrupt service routine. */
 72static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
 73{
 74	struct device *dev = dev_id;
 75	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
 76	void __iomem *ioaddr = pdata->ioaddr;
 77	unsigned long flags;
 78	u32 lp_status;
 79	u32 lp_cr;
 80
 81	spin_lock_irqsave(&pdata->lock, flags);
 82	if (clk_enable(pdata->clk)) {
 83		spin_unlock_irqrestore(&pdata->lock, flags);
 84		return IRQ_NONE;
 85	}
 86
 87	lp_status = readl(ioaddr + SRTC_LPSR);
 88	lp_cr = readl(ioaddr + SRTC_LPCR);
 89
 90	/* update irq data & counter */
 91	if (lp_status & SRTC_LPSR_ALP) {
 92		if (lp_cr & SRTC_LPCR_ALP)
 93			rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF);
 94
 95		/* disable further lp alarm interrupts */
 96		lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
 97	}
 98
 99	/* Update interrupt enables */
100	writel(lp_cr, ioaddr + SRTC_LPCR);
101
102	/* clear interrupt status */
103	writel(lp_status, ioaddr + SRTC_LPSR);
104
105	mxc_rtc_sync_lp_locked(dev, ioaddr);
106	clk_disable(pdata->clk);
107	spin_unlock_irqrestore(&pdata->lock, flags);
108	return IRQ_HANDLED;
109}
110
111/*
112 * Enable clk and aquire spinlock
113 * @return  0 if successful; non-zero otherwise.
114 */
115static int mxc_rtc_lock(struct mxc_rtc_data *const pdata)
116{
117	int ret;
118
119	spin_lock_irq(&pdata->lock);
120	ret = clk_enable(pdata->clk);
121	if (ret) {
122		spin_unlock_irq(&pdata->lock);
123		return ret;
124	}
125	return 0;
126}
127
128static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata)
129{
130	clk_disable(pdata->clk);
131	spin_unlock_irq(&pdata->lock);
132	return 0;
133}
134
135/*
136 * This function reads the current RTC time into tm in Gregorian date.
137 *
138 * @param  tm           contains the RTC time value upon return
139 *
140 * @return  0 if successful; non-zero otherwise.
141 */
142static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
143{
144	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
145	const int clk_failed = clk_enable(pdata->clk);
146
147	if (!clk_failed) {
148		const time64_t now = readl(pdata->ioaddr + SRTC_LPSCMR);
149
150		rtc_time64_to_tm(now, tm);
151		clk_disable(pdata->clk);
152		return 0;
153	}
154	return clk_failed;
155}
156
157/*
158 * This function sets the internal RTC time based on tm in Gregorian date.
159 *
160 * @param  tm           the time value to be set in the RTC
161 *
162 * @return  0 if successful; non-zero otherwise.
163 */
164static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
165{
166	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
167	time64_t time = rtc_tm_to_time64(tm);
168	int ret;
169
 
 
 
 
 
170	ret = mxc_rtc_lock(pdata);
171	if (ret)
172		return ret;
173
174	writel(time, pdata->ioaddr + SRTC_LPSCMR);
175	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
176	return mxc_rtc_unlock(pdata);
177}
178
179/*
180 * This function reads the current alarm value into the passed in \b alrm
181 * argument. It updates the \b alrm's pending field value based on the whether
182 * an alarm interrupt occurs or not.
183 *
184 * @param  alrm         contains the RTC alarm value upon return
185 *
186 * @return  0 if successful; non-zero otherwise.
187 */
188static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
189{
190	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
191	void __iomem *ioaddr = pdata->ioaddr;
192	int ret;
193
194	ret = mxc_rtc_lock(pdata);
195	if (ret)
196		return ret;
197
198	rtc_time64_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time);
199	alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP);
200	return mxc_rtc_unlock(pdata);
201}
202
203/*
204 * Enable/Disable alarm interrupt
205 * The caller should hold the pdata->lock
206 */
207static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata,
208					    unsigned int enable)
209{
210	u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR);
211
212	if (enable)
213		lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE);
214	else
215		lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
216
217	writel(lp_cr, pdata->ioaddr + SRTC_LPCR);
218}
219
220static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
221{
222	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
223	int ret = mxc_rtc_lock(pdata);
224
225	if (ret)
226		return ret;
227
228	mxc_rtc_alarm_irq_enable_locked(pdata, enable);
229	return mxc_rtc_unlock(pdata);
230}
231
232/*
233 * This function sets the RTC alarm based on passed in alrm.
234 *
235 * @param  alrm         the alarm value to be set in the RTC
236 *
237 * @return  0 if successful; non-zero otherwise.
238 */
239static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
240{
241	const time64_t time = rtc_tm_to_time64(&alrm->time);
242	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
243	int ret = mxc_rtc_lock(pdata);
244
245	if (ret)
246		return ret;
247
 
 
 
 
 
248	writel((u32)time, pdata->ioaddr + SRTC_LPSAR);
249
250	/* clear alarm interrupt status bit */
251	writel(SRTC_LPSR_ALP, pdata->ioaddr + SRTC_LPSR);
252	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
253
254	mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled);
255	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
256	mxc_rtc_unlock(pdata);
257	return ret;
258}
259
260static const struct rtc_class_ops mxc_rtc_ops = {
261	.read_time = mxc_rtc_read_time,
262	.set_time = mxc_rtc_set_time,
263	.read_alarm = mxc_rtc_read_alarm,
264	.set_alarm = mxc_rtc_set_alarm,
265	.alarm_irq_enable = mxc_rtc_alarm_irq_enable,
266};
267
268static int mxc_rtc_wait_for_flag(void __iomem *ioaddr, int flag)
269{
270	unsigned int timeout = REG_READ_TIMEOUT;
271
272	while (!(readl(ioaddr) & flag)) {
273		if (!--timeout)
274			return -EBUSY;
275	}
276	return 0;
277}
278
279static int mxc_rtc_probe(struct platform_device *pdev)
280{
281	struct mxc_rtc_data *pdata;
 
282	void __iomem *ioaddr;
283	int ret = 0;
284
285	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
286	if (!pdata)
287		return -ENOMEM;
288
289	pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0);
 
290	if (IS_ERR(pdata->ioaddr))
291		return PTR_ERR(pdata->ioaddr);
292
293	ioaddr = pdata->ioaddr;
294
295	pdata->clk = devm_clk_get(&pdev->dev, NULL);
296	if (IS_ERR(pdata->clk)) {
297		dev_err(&pdev->dev, "unable to get rtc clock!\n");
298		return PTR_ERR(pdata->clk);
299	}
300
301	spin_lock_init(&pdata->lock);
302	pdata->irq = platform_get_irq(pdev, 0);
303	if (pdata->irq < 0)
304		return pdata->irq;
305
306	device_init_wakeup(&pdev->dev, 1);
307	ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
308	if (ret)
309		dev_err(&pdev->dev, "failed to enable irq wake\n");
310
311	ret = clk_prepare_enable(pdata->clk);
312	if (ret)
313		return ret;
314	/* initialize glitch detect */
315	writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR);
316
317	/* clear lp interrupt status */
318	writel(0xFFFFFFFF, ioaddr + SRTC_LPSR);
319
320	/* move out of init state */
321	writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR);
322	ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES);
323	if (ret) {
324		dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_IES\n");
325		clk_disable_unprepare(pdata->clk);
326		return ret;
327	}
328
329	/* move out of non-valid state */
330	writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA |
331		SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR);
332	ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES);
333	if (ret) {
334		dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_NVES\n");
335		clk_disable_unprepare(pdata->clk);
336		return ret;
337	}
338
339	pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
340	if (IS_ERR(pdata->rtc))
341		return PTR_ERR(pdata->rtc);
342
343	pdata->rtc->ops = &mxc_rtc_ops;
344	pdata->rtc->range_max = U32_MAX;
345
346	clk_disable(pdata->clk);
347	platform_set_drvdata(pdev, pdata);
348	ret =
349	    devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0,
350			     pdev->name, &pdev->dev);
351	if (ret < 0) {
352		dev_err(&pdev->dev, "interrupt not available.\n");
353		clk_unprepare(pdata->clk);
354		return ret;
355	}
356
357	ret = rtc_register_device(pdata->rtc);
358	if (ret < 0)
 
 
359		clk_unprepare(pdata->clk);
 
 
360
361	return ret;
362}
363
364static int mxc_rtc_remove(struct platform_device *pdev)
365{
366	struct mxc_rtc_data *pdata = platform_get_drvdata(pdev);
367
368	clk_disable_unprepare(pdata->clk);
369	return 0;
370}
371
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
372static const struct of_device_id mxc_ids[] = {
373	{ .compatible = "fsl,imx53-rtc", },
374	{}
375};
376
377static struct platform_driver mxc_rtc_driver = {
378	.driver = {
379		.name = "mxc_rtc_v2",
380		.of_match_table = mxc_ids,
 
381	},
382	.probe = mxc_rtc_probe,
383	.remove = mxc_rtc_remove,
384};
385
386module_platform_driver(mxc_rtc_driver);
387
388MODULE_AUTHOR("Freescale Semiconductor, Inc.");
389MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53");
390MODULE_LICENSE("GPL");
v4.17
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Real Time Clock (RTC) Driver for i.MX53
  4 * Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
  5 * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG
  6 */
  7
  8#include <linux/clk.h>
  9#include <linux/io.h>
 10#include <linux/module.h>
 
 11#include <linux/platform_device.h>
 
 12#include <linux/rtc.h>
 13
 14#define SRTC_LPPDR_INIT       0x41736166	/* init for glitch detect */
 15
 16#define SRTC_LPCR_EN_LP       BIT(3)	/* lp enable */
 17#define SRTC_LPCR_WAE         BIT(4)	/* lp wakeup alarm enable */
 18#define SRTC_LPCR_ALP         BIT(7)	/* lp alarm flag */
 19#define SRTC_LPCR_NSA         BIT(11)	/* lp non secure access */
 20#define SRTC_LPCR_NVE         BIT(14)	/* lp non valid state exit bit */
 21#define SRTC_LPCR_IE          BIT(15)	/* lp init state exit bit */
 22
 23#define SRTC_LPSR_ALP         BIT(3)	/* lp alarm flag */
 24#define SRTC_LPSR_NVES        BIT(14)	/* lp non-valid state exit status */
 25#define SRTC_LPSR_IES         BIT(15)	/* lp init state exit status */
 26
 27#define SRTC_LPSCMR	0x00	/* LP Secure Counter MSB Reg */
 28#define SRTC_LPSCLR	0x04	/* LP Secure Counter LSB Reg */
 29#define SRTC_LPSAR	0x08	/* LP Secure Alarm Reg */
 30#define SRTC_LPCR	0x10	/* LP Control Reg */
 31#define SRTC_LPSR	0x14	/* LP Status Reg */
 32#define SRTC_LPPDR	0x18	/* LP Power Supply Glitch Detector Reg */
 33
 34/* max. number of retries to read registers, 120 was max during test */
 35#define REG_READ_TIMEOUT 2000
 36
 37struct mxc_rtc_data {
 38	struct rtc_device *rtc;
 39	void __iomem *ioaddr;
 40	struct clk *clk;
 41	spinlock_t lock; /* protects register access */
 42	int irq;
 43};
 44
 45/*
 46 * This function does write synchronization for writes to the lp srtc block.
 47 * To take care of the asynchronous CKIL clock, all writes from the IP domain
 48 * will be synchronized to the CKIL domain.
 49 * The caller should hold the pdata->lock
 50 */
 51static void mxc_rtc_sync_lp_locked(struct device *dev, void __iomem *ioaddr)
 52{
 53	unsigned int i;
 54
 55	/* Wait for 3 CKIL cycles */
 56	for (i = 0; i < 3; i++) {
 57		const u32 count = readl(ioaddr + SRTC_LPSCLR);
 58		unsigned int timeout = REG_READ_TIMEOUT;
 59
 60		while ((readl(ioaddr + SRTC_LPSCLR)) == count) {
 61			if (!--timeout) {
 62				dev_err_once(dev, "SRTC_LPSCLR stuck! Check your hw.\n");
 63				return;
 64			}
 65		}
 66	}
 67}
 68
 69/* This function is the RTC interrupt service routine. */
 70static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
 71{
 72	struct device *dev = dev_id;
 73	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
 74	void __iomem *ioaddr = pdata->ioaddr;
 75	unsigned long flags;
 76	u32 lp_status;
 77	u32 lp_cr;
 78
 79	spin_lock_irqsave(&pdata->lock, flags);
 80	if (clk_enable(pdata->clk)) {
 81		spin_unlock_irqrestore(&pdata->lock, flags);
 82		return IRQ_NONE;
 83	}
 84
 85	lp_status = readl(ioaddr + SRTC_LPSR);
 86	lp_cr = readl(ioaddr + SRTC_LPCR);
 87
 88	/* update irq data & counter */
 89	if (lp_status & SRTC_LPSR_ALP) {
 90		if (lp_cr & SRTC_LPCR_ALP)
 91			rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF);
 92
 93		/* disable further lp alarm interrupts */
 94		lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
 95	}
 96
 97	/* Update interrupt enables */
 98	writel(lp_cr, ioaddr + SRTC_LPCR);
 99
100	/* clear interrupt status */
101	writel(lp_status, ioaddr + SRTC_LPSR);
102
103	mxc_rtc_sync_lp_locked(dev, ioaddr);
104	clk_disable(pdata->clk);
105	spin_unlock_irqrestore(&pdata->lock, flags);
106	return IRQ_HANDLED;
107}
108
109/*
110 * Enable clk and aquire spinlock
111 * @return  0 if successful; non-zero otherwise.
112 */
113static int mxc_rtc_lock(struct mxc_rtc_data *const pdata)
114{
115	int ret;
116
117	spin_lock_irq(&pdata->lock);
118	ret = clk_enable(pdata->clk);
119	if (ret) {
120		spin_unlock_irq(&pdata->lock);
121		return ret;
122	}
123	return 0;
124}
125
126static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata)
127{
128	clk_disable(pdata->clk);
129	spin_unlock_irq(&pdata->lock);
130	return 0;
131}
132
133/*
134 * This function reads the current RTC time into tm in Gregorian date.
135 *
136 * @param  tm           contains the RTC time value upon return
137 *
138 * @return  0 if successful; non-zero otherwise.
139 */
140static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
141{
142	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
143	const int clk_failed = clk_enable(pdata->clk);
144
145	if (!clk_failed) {
146		const time64_t now = readl(pdata->ioaddr + SRTC_LPSCMR);
147
148		rtc_time64_to_tm(now, tm);
149		clk_disable(pdata->clk);
150		return 0;
151	}
152	return clk_failed;
153}
154
155/*
156 * This function sets the internal RTC time based on tm in Gregorian date.
157 *
158 * @param  tm           the time value to be set in the RTC
159 *
160 * @return  0 if successful; non-zero otherwise.
161 */
162static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
163{
164	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
165	time64_t time = rtc_tm_to_time64(tm);
166	int ret;
167
168	if (time > U32_MAX) {
169		dev_err(dev, "RTC exceeded by %llus\n", time - U32_MAX);
170		return -EINVAL;
171	}
172
173	ret = mxc_rtc_lock(pdata);
174	if (ret)
175		return ret;
176
177	writel(time, pdata->ioaddr + SRTC_LPSCMR);
178	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
179	return mxc_rtc_unlock(pdata);
180}
181
182/*
183 * This function reads the current alarm value into the passed in \b alrm
184 * argument. It updates the \b alrm's pending field value based on the whether
185 * an alarm interrupt occurs or not.
186 *
187 * @param  alrm         contains the RTC alarm value upon return
188 *
189 * @return  0 if successful; non-zero otherwise.
190 */
191static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
192{
193	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
194	void __iomem *ioaddr = pdata->ioaddr;
195	int ret;
196
197	ret = mxc_rtc_lock(pdata);
198	if (ret)
199		return ret;
200
201	rtc_time_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time);
202	alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP);
203	return mxc_rtc_unlock(pdata);
204}
205
206/*
207 * Enable/Disable alarm interrupt
208 * The caller should hold the pdata->lock
209 */
210static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata,
211					    unsigned int enable)
212{
213	u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR);
214
215	if (enable)
216		lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE);
217	else
218		lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE);
219
220	writel(lp_cr, pdata->ioaddr + SRTC_LPCR);
221}
222
223static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
224{
225	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
226	int ret = mxc_rtc_lock(pdata);
227
228	if (ret)
229		return ret;
230
231	mxc_rtc_alarm_irq_enable_locked(pdata, enable);
232	return mxc_rtc_unlock(pdata);
233}
234
235/*
236 * This function sets the RTC alarm based on passed in alrm.
237 *
238 * @param  alrm         the alarm value to be set in the RTC
239 *
240 * @return  0 if successful; non-zero otherwise.
241 */
242static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
243{
244	const time64_t time = rtc_tm_to_time64(&alrm->time);
245	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
246	int ret = mxc_rtc_lock(pdata);
247
248	if (ret)
249		return ret;
250
251	if (time > U32_MAX) {
252		dev_err(dev, "Hopefully I am out of service by then :-(\n");
253		return -EINVAL;
254	}
255
256	writel((u32)time, pdata->ioaddr + SRTC_LPSAR);
257
258	/* clear alarm interrupt status bit */
259	writel(SRTC_LPSR_ALP, pdata->ioaddr + SRTC_LPSR);
260	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
261
262	mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled);
263	mxc_rtc_sync_lp_locked(dev, pdata->ioaddr);
264	mxc_rtc_unlock(pdata);
265	return ret;
266}
267
268static const struct rtc_class_ops mxc_rtc_ops = {
269	.read_time = mxc_rtc_read_time,
270	.set_time = mxc_rtc_set_time,
271	.read_alarm = mxc_rtc_read_alarm,
272	.set_alarm = mxc_rtc_set_alarm,
273	.alarm_irq_enable = mxc_rtc_alarm_irq_enable,
274};
275
276static int mxc_rtc_wait_for_flag(void __iomem *ioaddr, int flag)
277{
278	unsigned int timeout = REG_READ_TIMEOUT;
279
280	while (!(readl(ioaddr) & flag)) {
281		if (!--timeout)
282			return -EBUSY;
283	}
284	return 0;
285}
286
287static int mxc_rtc_probe(struct platform_device *pdev)
288{
289	struct mxc_rtc_data *pdata;
290	struct resource *res;
291	void __iomem *ioaddr;
292	int ret = 0;
293
294	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
295	if (!pdata)
296		return -ENOMEM;
297
298	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
299	pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
300	if (IS_ERR(pdata->ioaddr))
301		return PTR_ERR(pdata->ioaddr);
302
303	ioaddr = pdata->ioaddr;
304
305	pdata->clk = devm_clk_get(&pdev->dev, NULL);
306	if (IS_ERR(pdata->clk)) {
307		dev_err(&pdev->dev, "unable to get rtc clock!\n");
308		return PTR_ERR(pdata->clk);
309	}
310
311	spin_lock_init(&pdata->lock);
312	pdata->irq = platform_get_irq(pdev, 0);
313	if (pdata->irq < 0)
314		return pdata->irq;
315
316	device_init_wakeup(&pdev->dev, 1);
 
 
 
317
318	ret = clk_prepare_enable(pdata->clk);
319	if (ret)
320		return ret;
321	/* initialize glitch detect */
322	writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR);
323
324	/* clear lp interrupt status */
325	writel(0xFFFFFFFF, ioaddr + SRTC_LPSR);
326
327	/* move out of init state */
328	writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR);
329	ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES);
330	if (ret) {
331		dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_IES\n");
332		clk_disable_unprepare(pdata->clk);
333		return ret;
334	}
335
336	/* move out of non-valid state */
337	writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA |
338		SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR);
339	ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES);
340	if (ret) {
341		dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_NVES\n");
342		clk_disable_unprepare(pdata->clk);
343		return ret;
344	}
345
 
 
 
 
 
 
 
346	clk_disable(pdata->clk);
347	platform_set_drvdata(pdev, pdata);
348	ret =
349	    devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0,
350			     pdev->name, &pdev->dev);
351	if (ret < 0) {
352		dev_err(&pdev->dev, "interrupt not available.\n");
353		clk_unprepare(pdata->clk);
354		return ret;
355	}
356
357	pdata->rtc =
358	    devm_rtc_device_register(&pdev->dev, pdev->name, &mxc_rtc_ops,
359				     THIS_MODULE);
360	if (IS_ERR(pdata->rtc)) {
361		clk_unprepare(pdata->clk);
362		return PTR_ERR(pdata->rtc);
363	}
364
365	return 0;
366}
367
368static int mxc_rtc_remove(struct platform_device *pdev)
369{
370	struct mxc_rtc_data *pdata = platform_get_drvdata(pdev);
371
372	clk_disable_unprepare(pdata->clk);
373	return 0;
374}
375
376#ifdef CONFIG_PM_SLEEP
377static int mxc_rtc_suspend(struct device *dev)
378{
379	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
380
381	if (device_may_wakeup(dev))
382		enable_irq_wake(pdata->irq);
383
384	return 0;
385}
386
387static int mxc_rtc_resume(struct device *dev)
388{
389	struct mxc_rtc_data *pdata = dev_get_drvdata(dev);
390
391	if (device_may_wakeup(dev))
392		disable_irq_wake(pdata->irq);
393
394	return 0;
395}
396#endif
397
398static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
399
400static const struct of_device_id mxc_ids[] = {
401	{ .compatible = "fsl,imx53-rtc", },
402	{}
403};
404
405static struct platform_driver mxc_rtc_driver = {
406	.driver = {
407		.name = "mxc_rtc_v2",
408		.of_match_table = mxc_ids,
409		.pm = &mxc_rtc_pm_ops,
410	},
411	.probe = mxc_rtc_probe,
412	.remove = mxc_rtc_remove,
413};
414
415module_platform_driver(mxc_rtc_driver);
416
417MODULE_AUTHOR("Freescale Semiconductor, Inc.");
418MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53");
419MODULE_LICENSE("GPL");