Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# Makefile for the Linux kernel device drivers.
4#
5# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
6# Rewritten to use lists instead of if-statements.
7#
8
9obj-y += irqchip
10obj-y += bus
11
12obj-$(CONFIG_GENERIC_PHY) += phy
13
14# GPIO must come after pinctrl as gpios may need to mux pins etc
15obj-$(CONFIG_PINCTRL) += pinctrl
16obj-$(CONFIG_GPIOLIB) += gpio
17obj-y += pwm
18
19obj-y += pci
20
21obj-$(CONFIG_PARISC) += parisc
22obj-$(CONFIG_RAPIDIO) += rapidio
23obj-y += video
24obj-y += idle
25
26# IPMI must come before ACPI in order to provide IPMI opregion support
27obj-y += char/ipmi
28
29obj-$(CONFIG_ACPI) += acpi
30obj-$(CONFIG_SFI) += sfi
31# PnP must come after ACPI since it will eventually need to check if acpi
32# was used and do nothing if so
33obj-$(CONFIG_PNP) += pnp
34obj-y += amba
35
36obj-y += clk
37# Many drivers will want to use DMA so this has to be made available
38# really early.
39obj-$(CONFIG_DMADEVICES) += dma
40
41# SOC specific infrastructure drivers.
42obj-y += soc
43
44obj-$(CONFIG_VIRTIO) += virtio
45obj-$(CONFIG_VDPA) += vdpa
46obj-$(CONFIG_XEN) += xen
47
48# regulators early, since some subsystems rely on them to initialize
49obj-$(CONFIG_REGULATOR) += regulator
50
51# reset controllers early, since gpu drivers might rely on them to initialize
52obj-$(CONFIG_RESET_CONTROLLER) += reset
53
54# tty comes before char so that the VT console is the boot-time
55# default.
56obj-y += tty
57obj-y += char
58
59# iommu comes before gpu as gpu are using iommu controllers
60obj-y += iommu
61
62# gpu comes after char for AGP vs DRM startup and after iommu
63obj-y += gpu
64
65obj-$(CONFIG_CONNECTOR) += connector
66
67# i810fb and intelfb depend on char/agp
68obj-$(CONFIG_FB_I810) += video/fbdev/i810
69obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb
70
71obj-$(CONFIG_PARPORT) += parport
72obj-$(CONFIG_NVM) += lightnvm
73obj-y += base block misc mfd nfc
74obj-$(CONFIG_LIBNVDIMM) += nvdimm
75obj-$(CONFIG_DAX) += dax
76obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf
77obj-$(CONFIG_NUBUS) += nubus
78obj-y += macintosh
79obj-$(CONFIG_IDE) += ide
80obj-y += scsi
81obj-y += nvme
82obj-$(CONFIG_ATA) += ata
83obj-$(CONFIG_TARGET_CORE) += target
84obj-$(CONFIG_MTD) += mtd
85obj-$(CONFIG_SPI) += spi
86obj-$(CONFIG_SPMI) += spmi
87obj-$(CONFIG_HSI) += hsi
88obj-$(CONFIG_SLIMBUS) += slimbus
89obj-y += net
90obj-$(CONFIG_ATM) += atm
91obj-$(CONFIG_FUSION) += message
92obj-y += firewire
93obj-$(CONFIG_UIO) += uio
94obj-$(CONFIG_VFIO) += vfio
95obj-y += cdrom
96obj-y += auxdisplay
97obj-$(CONFIG_PCCARD) += pcmcia
98obj-$(CONFIG_DIO) += dio
99obj-$(CONFIG_SBUS) += sbus
100obj-$(CONFIG_ZORRO) += zorro
101obj-$(CONFIG_ATA_OVER_ETH) += block/aoe
102obj-$(CONFIG_PARIDE) += block/paride
103obj-$(CONFIG_TC) += tc
104obj-$(CONFIG_USB_PHY) += usb
105obj-$(CONFIG_USB) += usb
106obj-$(CONFIG_USB_SUPPORT) += usb
107obj-$(CONFIG_PCI) += usb
108obj-$(CONFIG_USB_GADGET) += usb
109obj-$(CONFIG_OF) += usb
110obj-$(CONFIG_SERIO) += input/serio
111obj-$(CONFIG_GAMEPORT) += input/gameport
112obj-$(CONFIG_INPUT) += input
113obj-$(CONFIG_RTC_LIB) += rtc
114obj-y += i2c i3c media
115obj-$(CONFIG_PPS) += pps
116obj-y += ptp
117obj-$(CONFIG_W1) += w1
118obj-y += power
119obj-$(CONFIG_HWMON) += hwmon
120obj-$(CONFIG_THERMAL) += thermal
121obj-$(CONFIG_WATCHDOG) += watchdog
122obj-$(CONFIG_MD) += md
123obj-$(CONFIG_BT) += bluetooth
124obj-$(CONFIG_ACCESSIBILITY) += accessibility
125obj-$(CONFIG_ISDN) += isdn
126obj-$(CONFIG_EDAC) += edac
127obj-$(CONFIG_EISA) += eisa
128obj-$(CONFIG_PM_OPP) += opp
129obj-$(CONFIG_CPU_FREQ) += cpufreq
130obj-$(CONFIG_CPU_IDLE) += cpuidle
131obj-y += mmc
132obj-$(CONFIG_MEMSTICK) += memstick
133obj-$(CONFIG_NEW_LEDS) += leds
134obj-$(CONFIG_INFINIBAND) += infiniband
135obj-y += firmware
136obj-$(CONFIG_CRYPTO) += crypto
137obj-$(CONFIG_SUPERH) += sh
138ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
139obj-y += clocksource
140endif
141obj-$(CONFIG_DCA) += dca
142obj-$(CONFIG_HID) += hid
143obj-$(CONFIG_PPC_PS3) += ps3
144obj-$(CONFIG_OF) += of
145obj-$(CONFIG_SSB) += ssb
146obj-$(CONFIG_BCMA) += bcma
147obj-$(CONFIG_VHOST_RING) += vhost
148obj-$(CONFIG_VHOST) += vhost
149obj-$(CONFIG_VLYNQ) += vlynq
150obj-$(CONFIG_GREYBUS) += greybus
151obj-$(CONFIG_STAGING) += staging
152obj-y += platform
153
154obj-$(CONFIG_MAILBOX) += mailbox
155obj-$(CONFIG_HWSPINLOCK) += hwspinlock
156obj-$(CONFIG_REMOTEPROC) += remoteproc
157obj-$(CONFIG_RPMSG) += rpmsg
158obj-$(CONFIG_SOUNDWIRE) += soundwire
159
160# Virtualization drivers
161obj-$(CONFIG_VIRT_DRIVERS) += virt
162obj-$(CONFIG_HYPERV) += hv
163
164obj-$(CONFIG_PM_DEVFREQ) += devfreq
165obj-$(CONFIG_EXTCON) += extcon
166obj-$(CONFIG_MEMORY) += memory
167obj-$(CONFIG_IIO) += iio
168obj-$(CONFIG_VME_BUS) += vme
169obj-$(CONFIG_IPACK_BUS) += ipack
170obj-$(CONFIG_NTB) += ntb
171obj-$(CONFIG_POWERCAP) += powercap
172obj-$(CONFIG_MCB) += mcb
173obj-$(CONFIG_PERF_EVENTS) += perf
174obj-$(CONFIG_RAS) += ras
175obj-$(CONFIG_USB4) += thunderbolt
176obj-$(CONFIG_CORESIGHT) += hwtracing/coresight
177obj-y += hwtracing/intel_th
178obj-$(CONFIG_STM) += hwtracing/stm
179obj-$(CONFIG_ANDROID) += android
180obj-$(CONFIG_NVMEM) += nvmem
181obj-$(CONFIG_FPGA) += fpga
182obj-$(CONFIG_FSI) += fsi
183obj-$(CONFIG_TEE) += tee
184obj-$(CONFIG_MULTIPLEXER) += mux
185obj-$(CONFIG_UNISYS_VISORBUS) += visorbus
186obj-$(CONFIG_SIOX) += siox
187obj-$(CONFIG_GNSS) += gnss
188obj-$(CONFIG_INTERCONNECT) += interconnect
189obj-$(CONFIG_COUNTER) += counter
190obj-$(CONFIG_MOST) += most
1# SPDX-License-Identifier: GPL-2.0
2#
3# Makefile for the Linux kernel device drivers.
4#
5# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
6# Rewritten to use lists instead of if-statements.
7#
8
9obj-y += irqchip
10obj-y += bus
11
12obj-$(CONFIG_GENERIC_PHY) += phy
13
14# GPIO must come after pinctrl as gpios may need to mux pins etc
15obj-$(CONFIG_PINCTRL) += pinctrl
16obj-$(CONFIG_GPIOLIB) += gpio
17obj-y += pwm
18
19obj-y += pci
20
21obj-$(CONFIG_PARISC) += parisc
22obj-$(CONFIG_RAPIDIO) += rapidio
23obj-y += video
24obj-y += idle
25
26# IPMI must come before ACPI in order to provide IPMI opregion support
27obj-y += char/ipmi
28
29obj-$(CONFIG_ACPI) += acpi
30
31# PnP must come after ACPI since it will eventually need to check if acpi
32# was used and do nothing if so
33obj-$(CONFIG_PNP) += pnp
34obj-y += amba
35
36obj-y += clk
37# Many drivers will want to use DMA so this has to be made available
38# really early.
39obj-$(CONFIG_DMADEVICES) += dma
40
41# SOC specific infrastructure drivers.
42obj-y += soc
43
44obj-y += virtio
45obj-$(CONFIG_VDPA) += vdpa
46obj-$(CONFIG_XEN) += xen
47
48# regulators early, since some subsystems rely on them to initialize
49obj-$(CONFIG_REGULATOR) += regulator
50
51# reset controllers early, since gpu drivers might rely on them to initialize
52obj-$(CONFIG_RESET_CONTROLLER) += reset
53
54# tty comes before char so that the VT console is the boot-time
55# default.
56obj-y += tty
57obj-y += char
58
59# iommu comes before gpu as gpu are using iommu controllers
60obj-y += iommu
61
62# gpu comes after char for AGP vs DRM startup and after iommu
63obj-y += gpu
64
65obj-$(CONFIG_CONNECTOR) += connector
66
67# i810fb and intelfb depend on char/agp
68obj-$(CONFIG_FB_I810) += video/fbdev/i810
69obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb
70
71obj-$(CONFIG_PARPORT) += parport
72obj-y += base block misc mfd nfc
73obj-$(CONFIG_LIBNVDIMM) += nvdimm
74obj-$(CONFIG_DAX) += dax
75obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf
76obj-$(CONFIG_NUBUS) += nubus
77obj-y += cxl
78obj-y += macintosh
79obj-y += scsi
80obj-y += nvme
81obj-$(CONFIG_ATA) += ata
82obj-$(CONFIG_TARGET_CORE) += target
83obj-$(CONFIG_MTD) += mtd
84obj-$(CONFIG_SPI) += spi
85obj-$(CONFIG_SPMI) += spmi
86obj-$(CONFIG_HSI) += hsi
87obj-$(CONFIG_SLIMBUS) += slimbus
88obj-y += net
89obj-$(CONFIG_ATM) += atm
90obj-$(CONFIG_FUSION) += message
91obj-y += firewire
92obj-$(CONFIG_UIO) += uio
93obj-$(CONFIG_VFIO) += vfio
94obj-y += cdrom
95obj-y += auxdisplay
96obj-$(CONFIG_PCCARD) += pcmcia
97obj-$(CONFIG_DIO) += dio
98obj-$(CONFIG_SBUS) += sbus
99obj-$(CONFIG_ZORRO) += zorro
100obj-$(CONFIG_ATA_OVER_ETH) += block/aoe
101obj-$(CONFIG_PARIDE) += block/paride
102obj-$(CONFIG_TC) += tc
103obj-$(CONFIG_USB_PHY) += usb
104obj-$(CONFIG_USB) += usb
105obj-$(CONFIG_USB_SUPPORT) += usb
106obj-$(CONFIG_PCI) += usb
107obj-$(CONFIG_USB_GADGET) += usb
108obj-$(CONFIG_OF) += usb
109obj-$(CONFIG_SERIO) += input/serio
110obj-$(CONFIG_GAMEPORT) += input/gameport
111obj-$(CONFIG_INPUT) += input
112obj-$(CONFIG_RTC_LIB) += rtc
113obj-y += i2c i3c media
114obj-$(CONFIG_PPS) += pps
115obj-y += ptp
116obj-$(CONFIG_W1) += w1
117obj-y += power
118obj-$(CONFIG_HWMON) += hwmon
119obj-$(CONFIG_THERMAL) += thermal
120obj-$(CONFIG_WATCHDOG) += watchdog
121obj-$(CONFIG_MD) += md
122obj-$(CONFIG_BT) += bluetooth
123obj-$(CONFIG_ACCESSIBILITY) += accessibility
124obj-$(CONFIG_ISDN) += isdn
125obj-$(CONFIG_EDAC) += edac
126obj-$(CONFIG_EISA) += eisa
127obj-$(CONFIG_PM_OPP) += opp
128obj-$(CONFIG_CPU_FREQ) += cpufreq
129obj-$(CONFIG_CPU_IDLE) += cpuidle
130obj-y += mmc
131obj-y += ufs
132obj-$(CONFIG_MEMSTICK) += memstick
133obj-$(CONFIG_NEW_LEDS) += leds
134obj-$(CONFIG_INFINIBAND) += infiniband
135obj-y += firmware
136obj-$(CONFIG_CRYPTO) += crypto
137obj-$(CONFIG_SUPERH) += sh
138obj-y += clocksource
139obj-$(CONFIG_DCA) += dca
140obj-$(CONFIG_HID) += hid
141obj-$(CONFIG_PPC_PS3) += ps3
142obj-$(CONFIG_OF) += of
143obj-$(CONFIG_SSB) += ssb
144obj-$(CONFIG_BCMA) += bcma
145obj-$(CONFIG_VHOST_RING) += vhost
146obj-$(CONFIG_VHOST_IOTLB) += vhost
147obj-$(CONFIG_VHOST) += vhost
148obj-$(CONFIG_VLYNQ) += vlynq
149obj-$(CONFIG_GREYBUS) += greybus
150obj-$(CONFIG_COMEDI) += comedi
151obj-$(CONFIG_STAGING) += staging
152obj-y += platform
153
154obj-$(CONFIG_MAILBOX) += mailbox
155obj-$(CONFIG_HWSPINLOCK) += hwspinlock
156obj-$(CONFIG_REMOTEPROC) += remoteproc
157obj-$(CONFIG_RPMSG) += rpmsg
158obj-$(CONFIG_SOUNDWIRE) += soundwire
159
160# Virtualization drivers
161obj-$(CONFIG_VIRT_DRIVERS) += virt
162obj-$(subst m,y,$(CONFIG_HYPERV)) += hv
163
164obj-$(CONFIG_PM_DEVFREQ) += devfreq
165obj-$(CONFIG_EXTCON) += extcon
166obj-$(CONFIG_MEMORY) += memory
167obj-$(CONFIG_IIO) += iio
168obj-$(CONFIG_IPACK_BUS) += ipack
169obj-$(CONFIG_NTB) += ntb
170obj-$(CONFIG_POWERCAP) += powercap
171obj-$(CONFIG_MCB) += mcb
172obj-$(CONFIG_PERF_EVENTS) += perf
173obj-$(CONFIG_RAS) += ras
174obj-$(CONFIG_USB4) += thunderbolt
175obj-$(CONFIG_CORESIGHT) += hwtracing/coresight
176obj-y += hwtracing/intel_th
177obj-$(CONFIG_STM) += hwtracing/stm
178obj-$(CONFIG_HISI_PTT) += hwtracing/ptt
179obj-y += android
180obj-$(CONFIG_NVMEM) += nvmem
181obj-$(CONFIG_FPGA) += fpga
182obj-$(CONFIG_FSI) += fsi
183obj-$(CONFIG_TEE) += tee
184obj-$(CONFIG_MULTIPLEXER) += mux
185obj-$(CONFIG_SIOX) += siox
186obj-$(CONFIG_GNSS) += gnss
187obj-$(CONFIG_INTERCONNECT) += interconnect
188obj-$(CONFIG_COUNTER) += counter
189obj-$(CONFIG_MOST) += most
190obj-$(CONFIG_PECI) += peci
191obj-$(CONFIG_HTE) += hte