Linux Audio

Check our new training course

Loading...
v5.9
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Copyright (c) 2015, The Linux Foundation. All rights reserved.
  4 */
  5
 
  6#include <linux/platform_device.h>
 
  7
  8#include "dsi_phy.h"
  9
 10#define S_DIV_ROUND_UP(n, d)	\
 11	(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
 12
 13static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
 14				s32 min_result, bool even)
 15{
 16	s32 v;
 17
 18	v = (tmax - tmin) * percent;
 19	v = S_DIV_ROUND_UP(v, 100) + tmin;
 20	if (even && (v & 0x1))
 21		return max_t(s32, min_result, v - 1);
 22	else
 23		return max_t(s32, min_result, v);
 24}
 25
 26static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
 27					s32 ui, s32 coeff, s32 pcnt)
 28{
 29	s32 tmax, tmin, clk_z;
 30	s32 temp;
 31
 32	/* reset */
 33	temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
 34	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
 35	if (tmin > 255) {
 36		tmax = 511;
 37		clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
 38	} else {
 39		tmax = 255;
 40		clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
 41	}
 42
 43	/* adjust */
 44	temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
 45	timing->clk_zero = clk_z + 8 - temp;
 46}
 47
 48int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
 49			     struct msm_dsi_phy_clk_request *clk_req)
 50{
 51	const unsigned long bit_rate = clk_req->bitclk_rate;
 52	const unsigned long esc_rate = clk_req->escclk_rate;
 53	s32 ui, lpx;
 54	s32 tmax, tmin;
 55	s32 pcnt0 = 10;
 56	s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
 57	s32 pcnt2 = 10;
 58	s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
 59	s32 coeff = 1000; /* Precision, should avoid overflow */
 60	s32 temp;
 61
 62	if (!bit_rate || !esc_rate)
 63		return -EINVAL;
 64
 65	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
 66	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
 67
 68	tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
 69	tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
 70	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
 71
 72	temp = lpx / ui;
 73	if (temp & 0x1)
 74		timing->hs_rqst = temp;
 75	else
 76		timing->hs_rqst = max_t(s32, 0, temp - 2);
 77
 78	/* Calculate clk_zero after clk_prepare and hs_rqst */
 79	dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
 80
 81	temp = 105 * coeff + 12 * ui - 20 * coeff;
 82	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
 83	tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
 84	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
 85
 86	temp = 85 * coeff + 6 * ui;
 87	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
 88	temp = 40 * coeff + 4 * ui;
 89	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
 90	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
 91
 92	tmax = 255;
 93	temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
 94	temp = 145 * coeff + 10 * ui - temp;
 95	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
 96	timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
 97
 98	temp = 105 * coeff + 12 * ui - 20 * coeff;
 99	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
100	temp = 60 * coeff + 4 * ui;
101	tmin = DIV_ROUND_UP(temp, ui) - 2;
102	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
103
104	tmax = 255;
105	tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
106	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
107
108	tmax = 63;
109	temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
110	temp = 60 * coeff + 52 * ui - 24 * ui - temp;
111	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
112	timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0,
113						       false);
114	tmax = 63;
115	temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
116	temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
117	temp += 8 * ui + lpx;
118	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
119	if (tmin > tmax) {
120		temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
121		timing->shared_timings.clk_pre = temp >> 1;
122		timing->shared_timings.clk_pre_inc_by_2 = true;
123	} else {
124		timing->shared_timings.clk_pre =
125				linear_inter(tmax, tmin, pcnt2, 0, false);
126		timing->shared_timings.clk_pre_inc_by_2 = false;
127	}
128
129	timing->ta_go = 3;
130	timing->ta_sure = 0;
131	timing->ta_get = 4;
132
133	DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
134		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
135		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
136		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
137		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
138		timing->hs_rqst);
139
140	return 0;
141}
142
143int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
144				struct msm_dsi_phy_clk_request *clk_req)
145{
146	const unsigned long bit_rate = clk_req->bitclk_rate;
147	const unsigned long esc_rate = clk_req->escclk_rate;
148	s32 ui, ui_x8;
149	s32 tmax, tmin;
150	s32 pcnt0 = 50;
151	s32 pcnt1 = 50;
152	s32 pcnt2 = 10;
153	s32 pcnt3 = 30;
154	s32 pcnt4 = 10;
155	s32 pcnt5 = 2;
156	s32 coeff = 1000; /* Precision, should avoid overflow */
157	s32 hb_en, hb_en_ckln, pd_ckln, pd;
158	s32 val, val_ckln;
159	s32 temp;
160
161	if (!bit_rate || !esc_rate)
162		return -EINVAL;
163
164	timing->hs_halfbyte_en = 0;
165	hb_en = 0;
166	timing->hs_halfbyte_en_ckln = 0;
167	hb_en_ckln = 0;
168	timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3;
169	pd_ckln = timing->hs_prep_dly_ckln;
170	timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1;
171	pd = timing->hs_prep_dly;
172
173	val = (hb_en << 2) + (pd << 1);
174	val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1);
175
176	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
177	ui_x8 = ui << 3;
178
179	temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
180	tmin = max_t(s32, temp, 0);
181	temp = (95 * coeff - val_ckln * ui) / ui_x8;
182	tmax = max_t(s32, temp, 0);
183	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
184
185	temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui;
186	tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
187	tmax = (tmin > 255) ? 511 : 255;
188	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
189
190	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
191	temp = 105 * coeff + 12 * ui - 20 * coeff;
192	tmax = (temp + 3 * ui) / ui_x8;
193	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
194
195	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8);
196	tmin = max_t(s32, temp, 0);
197	temp = (85 * coeff + 6 * ui - val * ui) / ui_x8;
198	tmax = max_t(s32, temp, 0);
199	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
200
201	temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui;
202	tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
203	tmax = 255;
204	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
205
206	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8);
207	temp = 105 * coeff + 12 * ui - 20 * coeff;
208	tmax = (temp + 3 * ui) / ui_x8;
209	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
210
211	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
212	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
213
214	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
215	tmax = 255;
216	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
217
218	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
219	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
220
221	temp = 60 * coeff + 52 * ui - 43 * ui;
222	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
223	tmax = 63;
224	timing->shared_timings.clk_post =
225				linear_inter(tmax, tmin, pcnt2, 0, false);
226
227	temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui;
228	temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui;
229	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
230				(((timing->hs_rqst_ckln << 3) + 8) * ui);
231	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
232	tmax = 63;
233	if (tmin > tmax) {
234		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
235		timing->shared_timings.clk_pre = temp >> 1;
236		timing->shared_timings.clk_pre_inc_by_2 = 1;
237	} else {
238		timing->shared_timings.clk_pre =
239				linear_inter(tmax, tmin, pcnt2, 0, false);
240		timing->shared_timings.clk_pre_inc_by_2 = 0;
241	}
242
243	timing->ta_go = 3;
244	timing->ta_sure = 0;
245	timing->ta_get = 4;
246
247	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
248	    timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
249	    timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
250	    timing->clk_trail, timing->clk_prepare, timing->hs_exit,
251	    timing->hs_zero, timing->hs_prepare, timing->hs_trail,
252	    timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
253	    timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
254	    timing->hs_prep_dly_ckln);
255
256	return 0;
257}
258
259int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
260	struct msm_dsi_phy_clk_request *clk_req)
261{
262	const unsigned long bit_rate = clk_req->bitclk_rate;
263	const unsigned long esc_rate = clk_req->escclk_rate;
264	s32 ui, ui_x8;
265	s32 tmax, tmin;
266	s32 pcnt0 = 50;
267	s32 pcnt1 = 50;
268	s32 pcnt2 = 10;
269	s32 pcnt3 = 30;
270	s32 pcnt4 = 10;
271	s32 pcnt5 = 2;
272	s32 coeff = 1000; /* Precision, should avoid overflow */
273	s32 hb_en, hb_en_ckln;
274	s32 temp;
275
276	if (!bit_rate || !esc_rate)
277		return -EINVAL;
278
279	timing->hs_halfbyte_en = 0;
280	hb_en = 0;
281	timing->hs_halfbyte_en_ckln = 0;
282	hb_en_ckln = 0;
283
284	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
285	ui_x8 = ui << 3;
286
287	temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
288	tmin = max_t(s32, temp, 0);
289	temp = (95 * coeff) / ui_x8;
290	tmax = max_t(s32, temp, 0);
291	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
292
293	temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
294	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
295	tmax = (tmin > 255) ? 511 : 255;
296	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
297
298	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
299	temp = 105 * coeff + 12 * ui - 20 * coeff;
300	tmax = (temp + 3 * ui) / ui_x8;
301	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
302
303	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
304	tmin = max_t(s32, temp, 0);
305	temp = (85 * coeff + 6 * ui) / ui_x8;
306	tmax = max_t(s32, temp, 0);
307	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
308
309	temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
310	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
311	tmax = 255;
312	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
313
314	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
315	temp = 105 * coeff + 12 * ui - 20 * coeff;
316	tmax = (temp / ui_x8) - 1;
317	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
318
319	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
320	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
321
322	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
323	tmax = 255;
324	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
325
326	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
327	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
328
329	temp = 60 * coeff + 52 * ui - 43 * ui;
330	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
331	tmax = 63;
332	timing->shared_timings.clk_post =
333		linear_inter(tmax, tmin, pcnt2, 0, false);
334
335	temp = 8 * ui + (timing->clk_prepare << 3) * ui;
336	temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
337	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
338		(((timing->hs_rqst_ckln << 3) + 8) * ui);
339	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
340	tmax = 63;
341	if (tmin > tmax) {
342		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
343		timing->shared_timings.clk_pre = temp >> 1;
344		timing->shared_timings.clk_pre_inc_by_2 = 1;
345	} else {
346		timing->shared_timings.clk_pre =
347			linear_inter(tmax, tmin, pcnt2, 0, false);
348			timing->shared_timings.clk_pre_inc_by_2 = 0;
349	}
350
351	timing->ta_go = 3;
352	timing->ta_sure = 0;
353	timing->ta_get = 4;
354
355	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
356		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
357		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
358		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
359		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
360		timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
361		timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
362		timing->hs_prep_dly_ckln);
363
364	return 0;
365}
366
367void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
368				u32 bit_mask)
369{
370	int phy_id = phy->id;
371	u32 val;
 
 
 
 
 
 
 
 
 
 
 
 
372
373	if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
374		return;
375
376	val = dsi_phy_read(phy->base + reg);
377
378	if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
379		dsi_phy_write(phy->base + reg, val | bit_mask);
380	else
381		dsi_phy_write(phy->base + reg, val & (~bit_mask));
382}
383
384static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
385{
386	struct regulator_bulk_data *s = phy->supplies;
387	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
388	struct device *dev = &phy->pdev->dev;
389	int num = phy->cfg->reg_cfg.num;
390	int i, ret;
391
392	for (i = 0; i < num; i++)
393		s[i].supply = regs[i].name;
 
 
 
394
395	ret = devm_regulator_bulk_get(dev, num, s);
396	if (ret < 0) {
397		if (ret != -EPROBE_DEFER) {
398			DRM_DEV_ERROR(dev,
399				      "%s: failed to init regulator, ret=%d\n",
400				      __func__, ret);
401		}
402
403		return ret;
404	}
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
405
406	return 0;
407}
408
409static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
 
410{
411	struct regulator_bulk_data *s = phy->supplies;
412	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
413	int num = phy->cfg->reg_cfg.num;
414	int i;
 
 
415
416	DBG("");
417	for (i = num - 1; i >= 0; i--)
418		if (regs[i].disable_load >= 0)
419			regulator_set_load(s[i].consumer, regs[i].disable_load);
420
421	regulator_bulk_disable(num, s);
422}
423
424static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
425{
426	struct regulator_bulk_data *s = phy->supplies;
427	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
428	struct device *dev = &phy->pdev->dev;
429	int num = phy->cfg->reg_cfg.num;
430	int ret, i;
431
432	DBG("");
433	for (i = 0; i < num; i++) {
434		if (regs[i].enable_load >= 0) {
435			ret = regulator_set_load(s[i].consumer,
436							regs[i].enable_load);
437			if (ret < 0) {
438				DRM_DEV_ERROR(dev,
439					"regulator %d set op mode failed, %d\n",
440					i, ret);
441				goto fail;
442			}
443		}
444	}
445
446	ret = regulator_bulk_enable(num, s);
447	if (ret < 0) {
448		DRM_DEV_ERROR(dev, "regulator enable failed, %d\n", ret);
449		goto fail;
450	}
451
452	return 0;
 
 
453
454fail:
455	for (i--; i >= 0; i--)
456		regulator_set_load(s[i].consumer, regs[i].disable_load);
457	return ret;
 
 
 
 
 
458}
459
460static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
461{
462	struct device *dev = &phy->pdev->dev;
463	int ret;
464
465	pm_runtime_get_sync(dev);
466
467	ret = clk_prepare_enable(phy->ahb_clk);
468	if (ret) {
469		DRM_DEV_ERROR(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
470		pm_runtime_put_sync(dev);
471	}
472
473	return ret;
474}
475
476static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
477{
478	clk_disable_unprepare(phy->ahb_clk);
479	pm_runtime_put_autosuspend(&phy->pdev->dev);
480}
481
482static const struct of_device_id dsi_phy_dt_match[] = {
483#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
484	{ .compatible = "qcom,dsi-phy-28nm-hpm",
485	  .data = &dsi_phy_28nm_hpm_cfgs },
486	{ .compatible = "qcom,dsi-phy-28nm-hpm-fam-b",
487	  .data = &dsi_phy_28nm_hpm_famb_cfgs },
488	{ .compatible = "qcom,dsi-phy-28nm-lp",
489	  .data = &dsi_phy_28nm_lp_cfgs },
490#endif
491#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
492	{ .compatible = "qcom,dsi-phy-20nm",
493	  .data = &dsi_phy_20nm_cfgs },
494#endif
495#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
496	{ .compatible = "qcom,dsi-phy-28nm-8960",
497	  .data = &dsi_phy_28nm_8960_cfgs },
498#endif
499#ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
500	{ .compatible = "qcom,dsi-phy-14nm",
501	  .data = &dsi_phy_14nm_cfgs },
 
 
502	{ .compatible = "qcom,dsi-phy-14nm-660",
503	  .data = &dsi_phy_14nm_660_cfgs },
 
 
504#endif
505#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
506	{ .compatible = "qcom,dsi-phy-10nm",
507	  .data = &dsi_phy_10nm_cfgs },
508	{ .compatible = "qcom,dsi-phy-10nm-8998",
509	  .data = &dsi_phy_10nm_8998_cfgs },
510#endif
 
 
 
 
 
 
 
 
511	{}
512};
513
514/*
515 * Currently, we only support one SoC for each PHY type. When we have multiple
516 * SoCs for the same PHY, we can try to make the index searching a bit more
517 * clever.
518 */
519static int dsi_phy_get_id(struct msm_dsi_phy *phy)
520{
521	struct platform_device *pdev = phy->pdev;
522	const struct msm_dsi_phy_cfg *cfg = phy->cfg;
523	struct resource *res;
524	int i;
525
526	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy");
527	if (!res)
528		return -EINVAL;
529
530	for (i = 0; i < cfg->num_dsi_phy; i++) {
531		if (cfg->io_start[i] == res->start)
532			return i;
533	}
534
535	return -EINVAL;
536}
537
538int msm_dsi_phy_init_common(struct msm_dsi_phy *phy)
539{
540	struct platform_device *pdev = phy->pdev;
541	int ret = 0;
542
543	phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
544				"DSI_PHY_REG");
545	if (IS_ERR(phy->reg_base)) {
546		DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n",
547			__func__);
548		ret = -ENOMEM;
549		goto fail;
550	}
551
552fail:
553	return ret;
554}
555
556static int dsi_phy_driver_probe(struct platform_device *pdev)
557{
558	struct msm_dsi_phy *phy;
559	struct device *dev = &pdev->dev;
560	const struct of_device_id *match;
561	int ret;
562
563	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
564	if (!phy)
565		return -ENOMEM;
566
567	match = of_match_node(dsi_phy_dt_match, dev->of_node);
568	if (!match)
 
 
 
 
 
 
 
 
569		return -ENODEV;
570
571	phy->cfg = match->data;
572	phy->pdev = pdev;
573
574	phy->id = dsi_phy_get_id(phy);
575	if (phy->id < 0) {
576		ret = phy->id;
577		DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n",
578			__func__, ret);
579		goto fail;
580	}
581
582	phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
583				"qcom,dsi-phy-regulator-ldo-mode");
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
584
585	phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
586	if (IS_ERR(phy->base)) {
587		DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__);
588		ret = -ENOMEM;
589		goto fail;
590	}
591
592	ret = dsi_phy_regulator_init(phy);
 
 
593	if (ret)
594		goto fail;
595
596	phy->ahb_clk = msm_clk_get(pdev, "iface");
597	if (IS_ERR(phy->ahb_clk)) {
598		DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__);
599		ret = PTR_ERR(phy->ahb_clk);
600		goto fail;
601	}
602
603	if (phy->cfg->ops.init) {
604		ret = phy->cfg->ops.init(phy);
605		if (ret)
606			goto fail;
607	}
608
609	/* PLL init will call into clk_register which requires
610	 * register access, so we need to enable power and ahb clock.
611	 */
612	ret = dsi_phy_enable_resource(phy);
613	if (ret)
614		goto fail;
615
616	phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
617	if (IS_ERR_OR_NULL(phy->pll)) {
618		DRM_DEV_INFO(dev,
619			"%s: pll init failed: %ld, need separate pll clk driver\n",
620			__func__, PTR_ERR(phy->pll));
621		phy->pll = NULL;
622	}
623
 
 
 
 
 
 
624	dsi_phy_disable_resource(phy);
625
626	platform_set_drvdata(pdev, phy);
627
628	return 0;
629
630fail:
631	return ret;
632}
633
634static int dsi_phy_driver_remove(struct platform_device *pdev)
635{
636	struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
637
638	if (phy && phy->pll) {
639		msm_dsi_pll_destroy(phy->pll);
640		phy->pll = NULL;
641	}
642
643	platform_set_drvdata(pdev, NULL);
644
645	return 0;
646}
647
648static struct platform_driver dsi_phy_platform_driver = {
649	.probe      = dsi_phy_driver_probe,
650	.remove     = dsi_phy_driver_remove,
651	.driver     = {
652		.name   = "msm_dsi_phy",
653		.of_match_table = dsi_phy_dt_match,
654	},
655};
656
657void __init msm_dsi_phy_driver_register(void)
658{
659	platform_driver_register(&dsi_phy_platform_driver);
660}
661
662void __exit msm_dsi_phy_driver_unregister(void)
663{
664	platform_driver_unregister(&dsi_phy_platform_driver);
665}
666
667int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
668			struct msm_dsi_phy_clk_request *clk_req)
 
669{
670	struct device *dev = &phy->pdev->dev;
671	int ret;
672
673	if (!phy || !phy->cfg->ops.enable)
674		return -EINVAL;
675
 
 
676	ret = dsi_phy_enable_resource(phy);
677	if (ret) {
678		DRM_DEV_ERROR(dev, "%s: resource enable failed, %d\n",
679			__func__, ret);
680		goto res_en_fail;
681	}
682
683	ret = dsi_phy_regulator_enable(phy);
684	if (ret) {
685		DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n",
686			__func__, ret);
687		goto reg_en_fail;
688	}
689
690	ret = phy->cfg->ops.enable(phy, src_pll_id, clk_req);
691	if (ret) {
692		DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret);
693		goto phy_en_fail;
694	}
695
 
 
 
696	/*
697	 * Resetting DSI PHY silently changes its PLL registers to reset status,
698	 * which will confuse clock driver and result in wrong output rate of
699	 * link clocks. Restore PLL status if its PLL is being used as clock
700	 * source.
701	 */
702	if (phy->usecase != MSM_DSI_PHY_SLAVE) {
703		ret = msm_dsi_pll_restore_state(phy->pll);
704		if (ret) {
705			DRM_DEV_ERROR(dev, "%s: failed to restore pll state, %d\n",
706				__func__, ret);
707			goto pll_restor_fail;
708		}
709	}
710
711	return 0;
712
713pll_restor_fail:
714	if (phy->cfg->ops.disable)
715		phy->cfg->ops.disable(phy);
716phy_en_fail:
717	dsi_phy_regulator_disable(phy);
718reg_en_fail:
719	dsi_phy_disable_resource(phy);
720res_en_fail:
721	return ret;
722}
723
724void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
725{
726	if (!phy || !phy->cfg->ops.disable)
727		return;
728
729	phy->cfg->ops.disable(phy);
730
731	dsi_phy_regulator_disable(phy);
732	dsi_phy_disable_resource(phy);
733}
734
735void msm_dsi_phy_get_shared_timings(struct msm_dsi_phy *phy,
736			struct msm_dsi_phy_shared_timings *shared_timings)
737{
738	memcpy(shared_timings, &phy->timing.shared_timings,
739	       sizeof(*shared_timings));
740}
741
742struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
 
743{
744	if (!phy)
745		return NULL;
746
747	return phy->pll;
748}
749
750void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
751			     enum msm_dsi_phy_usecase uc)
752{
753	if (phy)
754		phy->usecase = uc;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
755}
v6.2
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Copyright (c) 2015, The Linux Foundation. All rights reserved.
  4 */
  5
  6#include <linux/clk-provider.h>
  7#include <linux/platform_device.h>
  8#include <dt-bindings/phy/phy.h>
  9
 10#include "dsi_phy.h"
 11
 12#define S_DIV_ROUND_UP(n, d)	\
 13	(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
 14
 15static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
 16				s32 min_result, bool even)
 17{
 18	s32 v;
 19
 20	v = (tmax - tmin) * percent;
 21	v = S_DIV_ROUND_UP(v, 100) + tmin;
 22	if (even && (v & 0x1))
 23		return max_t(s32, min_result, v - 1);
 24	else
 25		return max_t(s32, min_result, v);
 26}
 27
 28static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
 29					s32 ui, s32 coeff, s32 pcnt)
 30{
 31	s32 tmax, tmin, clk_z;
 32	s32 temp;
 33
 34	/* reset */
 35	temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
 36	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
 37	if (tmin > 255) {
 38		tmax = 511;
 39		clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
 40	} else {
 41		tmax = 255;
 42		clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
 43	}
 44
 45	/* adjust */
 46	temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
 47	timing->clk_zero = clk_z + 8 - temp;
 48}
 49
 50int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
 51			     struct msm_dsi_phy_clk_request *clk_req)
 52{
 53	const unsigned long bit_rate = clk_req->bitclk_rate;
 54	const unsigned long esc_rate = clk_req->escclk_rate;
 55	s32 ui, lpx;
 56	s32 tmax, tmin;
 57	s32 pcnt0 = 10;
 58	s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
 59	s32 pcnt2 = 10;
 60	s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
 61	s32 coeff = 1000; /* Precision, should avoid overflow */
 62	s32 temp;
 63
 64	if (!bit_rate || !esc_rate)
 65		return -EINVAL;
 66
 67	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
 68	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
 69
 70	tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
 71	tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
 72	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
 73
 74	temp = lpx / ui;
 75	if (temp & 0x1)
 76		timing->hs_rqst = temp;
 77	else
 78		timing->hs_rqst = max_t(s32, 0, temp - 2);
 79
 80	/* Calculate clk_zero after clk_prepare and hs_rqst */
 81	dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
 82
 83	temp = 105 * coeff + 12 * ui - 20 * coeff;
 84	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
 85	tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
 86	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
 87
 88	temp = 85 * coeff + 6 * ui;
 89	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
 90	temp = 40 * coeff + 4 * ui;
 91	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
 92	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
 93
 94	tmax = 255;
 95	temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
 96	temp = 145 * coeff + 10 * ui - temp;
 97	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
 98	timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
 99
100	temp = 105 * coeff + 12 * ui - 20 * coeff;
101	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
102	temp = 60 * coeff + 4 * ui;
103	tmin = DIV_ROUND_UP(temp, ui) - 2;
104	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
105
106	tmax = 255;
107	tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
108	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
109
110	tmax = 63;
111	temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
112	temp = 60 * coeff + 52 * ui - 24 * ui - temp;
113	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
114	timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0,
115						       false);
116	tmax = 63;
117	temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
118	temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
119	temp += 8 * ui + lpx;
120	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
121	if (tmin > tmax) {
122		temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
123		timing->shared_timings.clk_pre = temp >> 1;
124		timing->shared_timings.clk_pre_inc_by_2 = true;
125	} else {
126		timing->shared_timings.clk_pre =
127				linear_inter(tmax, tmin, pcnt2, 0, false);
128		timing->shared_timings.clk_pre_inc_by_2 = false;
129	}
130
131	timing->ta_go = 3;
132	timing->ta_sure = 0;
133	timing->ta_get = 4;
134
135	DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
136		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
137		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
138		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
139		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
140		timing->hs_rqst);
141
142	return 0;
143}
144
145int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
146				struct msm_dsi_phy_clk_request *clk_req)
147{
148	const unsigned long bit_rate = clk_req->bitclk_rate;
149	const unsigned long esc_rate = clk_req->escclk_rate;
150	s32 ui, ui_x8;
151	s32 tmax, tmin;
152	s32 pcnt0 = 50;
153	s32 pcnt1 = 50;
154	s32 pcnt2 = 10;
155	s32 pcnt3 = 30;
156	s32 pcnt4 = 10;
157	s32 pcnt5 = 2;
158	s32 coeff = 1000; /* Precision, should avoid overflow */
159	s32 hb_en, hb_en_ckln, pd_ckln, pd;
160	s32 val, val_ckln;
161	s32 temp;
162
163	if (!bit_rate || !esc_rate)
164		return -EINVAL;
165
166	timing->hs_halfbyte_en = 0;
167	hb_en = 0;
168	timing->hs_halfbyte_en_ckln = 0;
169	hb_en_ckln = 0;
170	timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3;
171	pd_ckln = timing->hs_prep_dly_ckln;
172	timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1;
173	pd = timing->hs_prep_dly;
174
175	val = (hb_en << 2) + (pd << 1);
176	val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1);
177
178	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
179	ui_x8 = ui << 3;
180
181	temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
182	tmin = max_t(s32, temp, 0);
183	temp = (95 * coeff - val_ckln * ui) / ui_x8;
184	tmax = max_t(s32, temp, 0);
185	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
186
187	temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui;
188	tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
189	tmax = (tmin > 255) ? 511 : 255;
190	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
191
192	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
193	temp = 105 * coeff + 12 * ui - 20 * coeff;
194	tmax = (temp + 3 * ui) / ui_x8;
195	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
196
197	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8);
198	tmin = max_t(s32, temp, 0);
199	temp = (85 * coeff + 6 * ui - val * ui) / ui_x8;
200	tmax = max_t(s32, temp, 0);
201	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
202
203	temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui;
204	tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
205	tmax = 255;
206	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
207
208	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8);
209	temp = 105 * coeff + 12 * ui - 20 * coeff;
210	tmax = (temp + 3 * ui) / ui_x8;
211	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
212
213	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
214	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
215
216	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
217	tmax = 255;
218	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
219
220	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
221	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
222
223	temp = 60 * coeff + 52 * ui - 43 * ui;
224	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
225	tmax = 63;
226	timing->shared_timings.clk_post =
227				linear_inter(tmax, tmin, pcnt2, 0, false);
228
229	temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui;
230	temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui;
231	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
232				(((timing->hs_rqst_ckln << 3) + 8) * ui);
233	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
234	tmax = 63;
235	if (tmin > tmax) {
236		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
237		timing->shared_timings.clk_pre = temp >> 1;
238		timing->shared_timings.clk_pre_inc_by_2 = 1;
239	} else {
240		timing->shared_timings.clk_pre =
241				linear_inter(tmax, tmin, pcnt2, 0, false);
242		timing->shared_timings.clk_pre_inc_by_2 = 0;
243	}
244
245	timing->ta_go = 3;
246	timing->ta_sure = 0;
247	timing->ta_get = 4;
248
249	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
250	    timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
251	    timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
252	    timing->clk_trail, timing->clk_prepare, timing->hs_exit,
253	    timing->hs_zero, timing->hs_prepare, timing->hs_trail,
254	    timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
255	    timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
256	    timing->hs_prep_dly_ckln);
257
258	return 0;
259}
260
261int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
262	struct msm_dsi_phy_clk_request *clk_req)
263{
264	const unsigned long bit_rate = clk_req->bitclk_rate;
265	const unsigned long esc_rate = clk_req->escclk_rate;
266	s32 ui, ui_x8;
267	s32 tmax, tmin;
268	s32 pcnt0 = 50;
269	s32 pcnt1 = 50;
270	s32 pcnt2 = 10;
271	s32 pcnt3 = 30;
272	s32 pcnt4 = 10;
273	s32 pcnt5 = 2;
274	s32 coeff = 1000; /* Precision, should avoid overflow */
275	s32 hb_en, hb_en_ckln;
276	s32 temp;
277
278	if (!bit_rate || !esc_rate)
279		return -EINVAL;
280
281	timing->hs_halfbyte_en = 0;
282	hb_en = 0;
283	timing->hs_halfbyte_en_ckln = 0;
284	hb_en_ckln = 0;
285
286	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
287	ui_x8 = ui << 3;
288
289	temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
290	tmin = max_t(s32, temp, 0);
291	temp = (95 * coeff) / ui_x8;
292	tmax = max_t(s32, temp, 0);
293	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
294
295	temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
296	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
297	tmax = (tmin > 255) ? 511 : 255;
298	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
299
300	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
301	temp = 105 * coeff + 12 * ui - 20 * coeff;
302	tmax = (temp + 3 * ui) / ui_x8;
303	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
304
305	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
306	tmin = max_t(s32, temp, 0);
307	temp = (85 * coeff + 6 * ui) / ui_x8;
308	tmax = max_t(s32, temp, 0);
309	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
310
311	temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
312	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
313	tmax = 255;
314	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
315
316	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
317	temp = 105 * coeff + 12 * ui - 20 * coeff;
318	tmax = (temp / ui_x8) - 1;
319	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
320
321	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
322	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
323
324	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
325	tmax = 255;
326	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
327
328	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
329	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
330
331	temp = 60 * coeff + 52 * ui - 43 * ui;
332	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
333	tmax = 63;
334	timing->shared_timings.clk_post =
335		linear_inter(tmax, tmin, pcnt2, 0, false);
336
337	temp = 8 * ui + (timing->clk_prepare << 3) * ui;
338	temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
339	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
340		(((timing->hs_rqst_ckln << 3) + 8) * ui);
341	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
342	tmax = 63;
343	if (tmin > tmax) {
344		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
345		timing->shared_timings.clk_pre = temp >> 1;
346		timing->shared_timings.clk_pre_inc_by_2 = 1;
347	} else {
348		timing->shared_timings.clk_pre =
349			linear_inter(tmax, tmin, pcnt2, 0, false);
350		timing->shared_timings.clk_pre_inc_by_2 = 0;
351	}
352
353	timing->ta_go = 3;
354	timing->ta_sure = 0;
355	timing->ta_get = 4;
356
357	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
358		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
359		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
360		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
361		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
362		timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
363		timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
364		timing->hs_prep_dly_ckln);
365
366	return 0;
367}
368
369int msm_dsi_dphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing,
370	struct msm_dsi_phy_clk_request *clk_req)
371{
372	const unsigned long bit_rate = clk_req->bitclk_rate;
373	const unsigned long esc_rate = clk_req->escclk_rate;
374	s32 ui, ui_x8;
375	s32 tmax, tmin;
376	s32 pcnt_clk_prep = 50;
377	s32 pcnt_clk_zero = 2;
378	s32 pcnt_clk_trail = 30;
379	s32 pcnt_hs_prep = 50;
380	s32 pcnt_hs_zero = 10;
381	s32 pcnt_hs_trail = 30;
382	s32 pcnt_hs_exit = 10;
383	s32 coeff = 1000; /* Precision, should avoid overflow */
384	s32 hb_en;
385	s32 temp;
386
387	if (!bit_rate || !esc_rate)
388		return -EINVAL;
389
390	hb_en = 0;
391
392	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
393	ui_x8 = ui << 3;
 
 
 
394
395	/* TODO: verify these calculations against latest downstream driver
396	 * everything except clk_post/clk_pre uses calculations from v3 based
397	 * on the downstream driver having the same calculations for v3 and v4
398	 */
 
 
 
399
400	temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
401	tmin = max_t(s32, temp, 0);
402	temp = (95 * coeff) / ui_x8;
403	tmax = max_t(s32, temp, 0);
404	timing->clk_prepare = linear_inter(tmax, tmin, pcnt_clk_prep, 0, false);
405
406	temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
407	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
408	tmax = (tmin > 255) ? 511 : 255;
409	timing->clk_zero = linear_inter(tmax, tmin, pcnt_clk_zero, 0, false);
 
 
 
410
411	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
412	temp = 105 * coeff + 12 * ui - 20 * coeff;
413	tmax = (temp + 3 * ui) / ui_x8;
414	timing->clk_trail = linear_inter(tmax, tmin, pcnt_clk_trail, 0, false);
415
416	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
417	tmin = max_t(s32, temp, 0);
418	temp = (85 * coeff + 6 * ui) / ui_x8;
419	tmax = max_t(s32, temp, 0);
420	timing->hs_prepare = linear_inter(tmax, tmin, pcnt_hs_prep, 0, false);
421
422	temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
423	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
424	tmax = 255;
425	timing->hs_zero = linear_inter(tmax, tmin, pcnt_hs_zero, 0, false);
426
427	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
428	temp = 105 * coeff + 12 * ui - 20 * coeff;
429	tmax = (temp / ui_x8) - 1;
430	timing->hs_trail = linear_inter(tmax, tmin, pcnt_hs_trail, 0, false);
431
432	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
433	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
434
435	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
436	tmax = 255;
437	timing->hs_exit = linear_inter(tmax, tmin, pcnt_hs_exit, 0, false);
438
439	/* recommended min
440	 * = roundup((mipi_min_ns + t_hs_trail_ns)/(16*bit_clk_ns), 0) - 1
441	 */
442	temp = 60 * coeff + 52 * ui + + (timing->hs_trail + 1) * ui_x8;
443	tmin = DIV_ROUND_UP(temp, 16 * ui) - 1;
444	tmax = 255;
445	timing->shared_timings.clk_post = linear_inter(tmax, tmin, 5, 0, false);
446
447	/* recommended min
448	 * val1 = (tlpx_ns + clk_prepare_ns + clk_zero_ns + hs_rqst_ns)
449	 * val2 = (16 * bit_clk_ns)
450	 * final = roundup(val1/val2, 0) - 1
451	 */
452	temp = 52 * coeff + (timing->clk_prepare + timing->clk_zero + 1) * ui_x8 + 54 * coeff;
453	tmin = DIV_ROUND_UP(temp, 16 * ui) - 1;
454	tmax = 255;
455	timing->shared_timings.clk_pre = DIV_ROUND_UP((tmax - tmin) * 125, 10000) + tmin;
456
457	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
458		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
459		timing->clk_zero, timing->clk_trail, timing->clk_prepare, timing->hs_exit,
460		timing->hs_zero, timing->hs_prepare, timing->hs_trail, timing->hs_rqst);
461
462	return 0;
463}
464
465int msm_dsi_cphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing,
466	struct msm_dsi_phy_clk_request *clk_req)
467{
468	const unsigned long bit_rate = clk_req->bitclk_rate;
469	const unsigned long esc_rate = clk_req->escclk_rate;
470	s32 ui, ui_x7;
471	s32 tmax, tmin;
472	s32 coeff = 1000; /* Precision, should avoid overflow */
473	s32 temp;
474
475	if (!bit_rate || !esc_rate)
476		return -EINVAL;
 
 
477
478	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
479	ui_x7 = ui * 7;
480
481	temp = S_DIV_ROUND_UP(38 * coeff, ui_x7);
482	tmin = max_t(s32, temp, 0);
483	temp = (95 * coeff) / ui_x7;
484	tmax = max_t(s32, temp, 0);
485	timing->clk_prepare = linear_inter(tmax, tmin, 50, 0, false);
 
 
486
487	tmin = DIV_ROUND_UP(50 * coeff, ui_x7);
488	tmax = 255;
489	timing->hs_rqst = linear_inter(tmax, tmin, 1, 0, false);
 
 
 
 
 
 
 
 
 
 
490
491	tmin = DIV_ROUND_UP(100 * coeff, ui_x7) - 1;
492	tmax = 255;
493	timing->hs_exit = linear_inter(tmax, tmin, 10, 0, false);
 
 
494
495	tmin = 1;
496	tmax = 32;
497	timing->shared_timings.clk_post = linear_inter(tmax, tmin, 80, 0, false);
498
499	tmin = min_t(s32, 64, S_DIV_ROUND_UP(262 * coeff, ui_x7) - 1);
500	tmax = 64;
501	timing->shared_timings.clk_pre = linear_inter(tmax, tmin, 20, 0, false);
502
503	DBG("%d, %d, %d, %d, %d",
504		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
505		timing->clk_prepare, timing->hs_exit, timing->hs_rqst);
506
507	return 0;
508}
509
510static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
511{
512	struct device *dev = &phy->pdev->dev;
513	int ret;
514
515	pm_runtime_get_sync(dev);
516
517	ret = clk_prepare_enable(phy->ahb_clk);
518	if (ret) {
519		DRM_DEV_ERROR(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
520		pm_runtime_put_sync(dev);
521	}
522
523	return ret;
524}
525
526static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
527{
528	clk_disable_unprepare(phy->ahb_clk);
529	pm_runtime_put(&phy->pdev->dev);
530}
531
532static const struct of_device_id dsi_phy_dt_match[] = {
533#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
534	{ .compatible = "qcom,dsi-phy-28nm-hpm",
535	  .data = &dsi_phy_28nm_hpm_cfgs },
536	{ .compatible = "qcom,dsi-phy-28nm-hpm-fam-b",
537	  .data = &dsi_phy_28nm_hpm_famb_cfgs },
538	{ .compatible = "qcom,dsi-phy-28nm-lp",
539	  .data = &dsi_phy_28nm_lp_cfgs },
540#endif
541#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
542	{ .compatible = "qcom,dsi-phy-20nm",
543	  .data = &dsi_phy_20nm_cfgs },
544#endif
545#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
546	{ .compatible = "qcom,dsi-phy-28nm-8960",
547	  .data = &dsi_phy_28nm_8960_cfgs },
548#endif
549#ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
550	{ .compatible = "qcom,dsi-phy-14nm",
551	  .data = &dsi_phy_14nm_cfgs },
552	{ .compatible = "qcom,dsi-phy-14nm-2290",
553	  .data = &dsi_phy_14nm_2290_cfgs },
554	{ .compatible = "qcom,dsi-phy-14nm-660",
555	  .data = &dsi_phy_14nm_660_cfgs },
556	{ .compatible = "qcom,dsi-phy-14nm-8953",
557	  .data = &dsi_phy_14nm_8953_cfgs },
558#endif
559#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
560	{ .compatible = "qcom,dsi-phy-10nm",
561	  .data = &dsi_phy_10nm_cfgs },
562	{ .compatible = "qcom,dsi-phy-10nm-8998",
563	  .data = &dsi_phy_10nm_8998_cfgs },
564#endif
565#ifdef CONFIG_DRM_MSM_DSI_7NM_PHY
566	{ .compatible = "qcom,dsi-phy-7nm",
567	  .data = &dsi_phy_7nm_cfgs },
568	{ .compatible = "qcom,dsi-phy-7nm-8150",
569	  .data = &dsi_phy_7nm_8150_cfgs },
570	{ .compatible = "qcom,sc7280-dsi-phy-7nm",
571	  .data = &dsi_phy_7nm_7280_cfgs },
572#endif
573	{}
574};
575
576/*
577 * Currently, we only support one SoC for each PHY type. When we have multiple
578 * SoCs for the same PHY, we can try to make the index searching a bit more
579 * clever.
580 */
581static int dsi_phy_get_id(struct msm_dsi_phy *phy)
582{
583	struct platform_device *pdev = phy->pdev;
584	const struct msm_dsi_phy_cfg *cfg = phy->cfg;
585	struct resource *res;
586	int i;
587
588	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy");
589	if (!res)
590		return -EINVAL;
591
592	for (i = 0; i < cfg->num_dsi_phy; i++) {
593		if (cfg->io_start[i] == res->start)
594			return i;
595	}
596
597	return -EINVAL;
598}
599
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
600static int dsi_phy_driver_probe(struct platform_device *pdev)
601{
602	struct msm_dsi_phy *phy;
603	struct device *dev = &pdev->dev;
604	u32 phy_type;
605	int ret;
606
607	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
608	if (!phy)
609		return -ENOMEM;
610
611	phy->provided_clocks = devm_kzalloc(dev,
612			struct_size(phy->provided_clocks, hws, NUM_PROVIDED_CLKS),
613			GFP_KERNEL);
614	if (!phy->provided_clocks)
615		return -ENOMEM;
616
617	phy->provided_clocks->num = NUM_PROVIDED_CLKS;
618
619	phy->cfg = of_device_get_match_data(&pdev->dev);
620	if (!phy->cfg)
621		return -ENODEV;
622
 
623	phy->pdev = pdev;
624
625	phy->id = dsi_phy_get_id(phy);
626	if (phy->id < 0)
627		return dev_err_probe(dev, phy->id,
628				     "Couldn't identify PHY index\n");
 
 
 
629
630	phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
631				"qcom,dsi-phy-regulator-ldo-mode");
632	if (!of_property_read_u32(dev->of_node, "phy-type", &phy_type))
633		phy->cphy_mode = (phy_type == PHY_TYPE_CPHY);
634
635	phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size);
636	if (IS_ERR(phy->base))
637		return dev_err_probe(dev, PTR_ERR(phy->base),
638				     "Failed to map phy base\n");
639
640	phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size);
641	if (IS_ERR(phy->pll_base))
642		return dev_err_probe(dev, PTR_ERR(phy->pll_base),
643				     "Failed to map pll base\n");
644
645	if (phy->cfg->has_phy_lane) {
646		phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size);
647		if (IS_ERR(phy->lane_base))
648			return dev_err_probe(dev, PTR_ERR(phy->lane_base),
649					     "Failed to map phy lane base\n");
650	}
651
652	if (phy->cfg->has_phy_regulator) {
653		phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size);
654		if (IS_ERR(phy->reg_base))
655			return dev_err_probe(dev, PTR_ERR(phy->reg_base),
656					     "Failed to map phy regulator base\n");
657	}
658
659	if (phy->cfg->ops.parse_dt_properties) {
660		ret = phy->cfg->ops.parse_dt_properties(phy);
661		if (ret)
662			return ret;
 
663	}
664
665	ret = devm_regulator_bulk_get_const(dev, phy->cfg->num_regulators,
666					    phy->cfg->regulator_data,
667					    &phy->supplies);
668	if (ret)
669		return ret;
670
671	phy->ahb_clk = msm_clk_get(pdev, "iface");
672	if (IS_ERR(phy->ahb_clk))
673		return dev_err_probe(dev, PTR_ERR(phy->ahb_clk),
674				     "Unable to get ahb clk\n");
 
 
 
 
 
 
 
 
675
676	/* PLL init will call into clk_register which requires
677	 * register access, so we need to enable power and ahb clock.
678	 */
679	ret = dsi_phy_enable_resource(phy);
680	if (ret)
681		return ret;
682
683	if (phy->cfg->ops.pll_init) {
684		ret = phy->cfg->ops.pll_init(phy);
685		if (ret)
686			return dev_err_probe(dev, ret,
687					     "PLL init failed; need separate clk driver\n");
 
688	}
689
690	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
691				     phy->provided_clocks);
692	if (ret)
693		return dev_err_probe(dev, ret,
694				     "Failed to register clk provider\n");
695
696	dsi_phy_disable_resource(phy);
697
698	platform_set_drvdata(pdev, phy);
699
700	return 0;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
701}
702
703static struct platform_driver dsi_phy_platform_driver = {
704	.probe      = dsi_phy_driver_probe,
 
705	.driver     = {
706		.name   = "msm_dsi_phy",
707		.of_match_table = dsi_phy_dt_match,
708	},
709};
710
711void __init msm_dsi_phy_driver_register(void)
712{
713	platform_driver_register(&dsi_phy_platform_driver);
714}
715
716void __exit msm_dsi_phy_driver_unregister(void)
717{
718	platform_driver_unregister(&dsi_phy_platform_driver);
719}
720
721int msm_dsi_phy_enable(struct msm_dsi_phy *phy,
722			struct msm_dsi_phy_clk_request *clk_req,
723			struct msm_dsi_phy_shared_timings *shared_timings)
724{
725	struct device *dev;
726	int ret;
727
728	if (!phy || !phy->cfg->ops.enable)
729		return -EINVAL;
730
731	dev = &phy->pdev->dev;
732
733	ret = dsi_phy_enable_resource(phy);
734	if (ret) {
735		DRM_DEV_ERROR(dev, "%s: resource enable failed, %d\n",
736			__func__, ret);
737		goto res_en_fail;
738	}
739
740	ret = regulator_bulk_enable(phy->cfg->num_regulators, phy->supplies);
741	if (ret) {
742		DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n",
743			__func__, ret);
744		goto reg_en_fail;
745	}
746
747	ret = phy->cfg->ops.enable(phy, clk_req);
748	if (ret) {
749		DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret);
750		goto phy_en_fail;
751	}
752
753	memcpy(shared_timings, &phy->timing.shared_timings,
754	       sizeof(*shared_timings));
755
756	/*
757	 * Resetting DSI PHY silently changes its PLL registers to reset status,
758	 * which will confuse clock driver and result in wrong output rate of
759	 * link clocks. Restore PLL status if its PLL is being used as clock
760	 * source.
761	 */
762	if (phy->usecase != MSM_DSI_PHY_SLAVE) {
763		ret = msm_dsi_phy_pll_restore_state(phy);
764		if (ret) {
765			DRM_DEV_ERROR(dev, "%s: failed to restore phy state, %d\n",
766				__func__, ret);
767			goto pll_restor_fail;
768		}
769	}
770
771	return 0;
772
773pll_restor_fail:
774	if (phy->cfg->ops.disable)
775		phy->cfg->ops.disable(phy);
776phy_en_fail:
777	regulator_bulk_disable(phy->cfg->num_regulators, phy->supplies);
778reg_en_fail:
779	dsi_phy_disable_resource(phy);
780res_en_fail:
781	return ret;
782}
783
784void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
785{
786	if (!phy || !phy->cfg->ops.disable)
787		return;
788
789	phy->cfg->ops.disable(phy);
790
791	regulator_bulk_disable(phy->cfg->num_regulators, phy->supplies);
792	dsi_phy_disable_resource(phy);
793}
794
795void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
796			     enum msm_dsi_phy_usecase uc)
797{
798	if (phy)
799		phy->usecase = uc;
800}
801
802/* Returns true if we have to clear DSI_LANE_CTRL.HS_REQ_SEL_PHY */
803bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable)
804{
805	if (!phy || !phy->cfg->ops.set_continuous_clock)
806		return false;
807
808	return phy->cfg->ops.set_continuous_clock(phy, enable);
809}
810
811void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy)
 
812{
813	if (phy->cfg->ops.save_pll_state) {
814		phy->cfg->ops.save_pll_state(phy);
815		phy->state_saved = true;
816	}
817}
818
819int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy)
820{
821	int ret;
822
823	if (phy->cfg->ops.restore_pll_state && phy->state_saved) {
824		ret = phy->cfg->ops.restore_pll_state(phy);
825		if (ret)
826			return ret;
827
828		phy->state_saved = false;
829	}
830
831	return 0;
832}
833
834void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy)
835{
836	msm_disp_snapshot_add_block(disp_state,
837			phy->base_size, phy->base,
838			"dsi%d_phy", phy->id);
839
840	/* Do not try accessing PLL registers if it is switched off */
841	if (phy->pll_on)
842		msm_disp_snapshot_add_block(disp_state,
843			phy->pll_size, phy->pll_base,
844			"dsi%d_pll", phy->id);
845
846	if (phy->lane_base)
847		msm_disp_snapshot_add_block(disp_state,
848			phy->lane_size, phy->lane_base,
849			"dsi%d_lane", phy->id);
850
851	if (phy->reg_base)
852		msm_disp_snapshot_add_block(disp_state,
853			phy->reg_size, phy->reg_base,
854			"dsi%d_reg", phy->id);
855}