Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 help
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 help
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Novatel Wireless GPS receivers
70 - Siemens USB/MPI adapter.
71 - ViVOtech ViVOpay USB device.
72 - Infineon Modem Flashloader USB interface
73 - ZIO Motherboard USB serial interface
74
75 To compile this driver as a module, choose M here: the module
76 will be called usb-serial-simple.
77
78config USB_SERIAL_AIRCABLE
79 tristate "USB AIRcable Bluetooth Dongle Driver"
80 help
81 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
82
83 To compile this driver as a module, choose M here: the module
84 will be called aircable.
85
86config USB_SERIAL_ARK3116
87 tristate "USB ARK Micro 3116 USB Serial Driver"
88 help
89 Say Y here if you want to use a ARK Micro 3116 USB to Serial
90 device.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ark3116
94
95config USB_SERIAL_BELKIN
96 tristate "USB Belkin and Peracom Single Port Serial Driver"
97 help
98 Say Y here if you want to use a Belkin USB Serial single port
99 adaptor (F5U103 is one of the model numbers) or the Peracom single
100 port USB to serial adapter.
101
102 To compile this driver as a module, choose M here: the
103 module will be called belkin_sa.
104
105config USB_SERIAL_CH341
106 tristate "USB Winchiphead CH341 Single Port Serial Driver"
107 help
108 Say Y here if you want to use a Winchiphead CH341 single port
109 USB to serial adapter.
110
111 To compile this driver as a module, choose M here: the
112 module will be called ch341.
113
114config USB_SERIAL_WHITEHEAT
115 tristate "USB ConnectTech WhiteHEAT Serial Driver"
116 select USB_EZUSB_FX2
117 help
118 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
119 USB to serial converter device.
120
121 To compile this driver as a module, choose M here: the
122 module will be called whiteheat.
123
124config USB_SERIAL_DIGI_ACCELEPORT
125 tristate "USB Digi International AccelePort USB Serial Driver"
126 help
127 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
128 2 port (plus parallel port) and 4 port USB serial converters. The
129 parallel port on the USB 2 appears as a third serial port on Linux.
130 The Digi Acceleport USB 8 is not yet supported by this driver.
131
132 To compile this driver as a module, choose M here: the
133 module will be called digi_acceleport.
134
135config USB_SERIAL_CP210X
136 tristate "USB CP210x family of UART Bridge Controllers"
137 help
138 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139 to RS232 converters.
140
141 To compile this driver as a module, choose M here: the
142 module will be called cp210x.
143
144config USB_SERIAL_CYPRESS_M8
145 tristate "USB Cypress M8 USB Serial Driver"
146 help
147 Say Y here if you want to use a device that contains the Cypress
148 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149
150 Attempted SMP support... send bug reports!
151
152 Supported microcontrollers in the CY4601 family are:
153 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154
155 To compile this driver as a module, choose M here: the
156 module will be called cypress_m8.
157
158config USB_SERIAL_EMPEG
159 tristate "USB Empeg empeg-car Mark I/II Driver"
160 help
161 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
163 device node. See <file:Documentation/usb/usb-serial.rst> for more
164 tidbits of information.
165
166 To compile this driver as a module, choose M here: the
167 module will be called empeg.
168
169config USB_SERIAL_FTDI_SIO
170 tristate "USB FTDI Single Port Serial Driver"
171 help
172 Say Y here if you want to use a FTDI SIO single port USB to serial
173 converter device. The implementation I have is called the USC-1000.
174 This driver has also been tested with the 245 and 232 devices.
175
176 See <http://ftdi-usb-sio.sourceforge.net/> for more
177 information on this driver and the device.
178
179 To compile this driver as a module, choose M here: the
180 module will be called ftdi_sio.
181
182config USB_SERIAL_VISOR
183 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184 help
185 Say Y here if you want to connect to your HandSpring Visor, Palm
186 m500 or m505 through its USB docking station. See
187 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188 driver.
189
190 To compile this driver as a module, choose M here: the
191 module will be called visor.
192
193config USB_SERIAL_IPAQ
194 tristate "USB PocketPC PDA Driver"
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.rst>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver"
206 help
207 Say Y here if you want to enable simple serial support for USB IrDA
208 devices. This is useful if you do not want to use the full IrDA
209 stack.
210
211 To compile this driver as a module, choose M here: the
212 module will be called ir-usb.
213
214config USB_SERIAL_EDGEPORT
215 tristate "USB Inside Out Edgeport Serial Driver"
216 help
217 Say Y here if you want to use any of the following devices from
218 Inside Out Networks (Digi):
219 Edgeport/4
220 Rapidport/4
221 Edgeport/4t
222 Edgeport/2
223 Edgeport/4i
224 Edgeport/2i
225 Edgeport/421
226 Edgeport/21
227 Edgeport/8
228 Edgeport/8 Dual
229 Edgeport/2D8
230 Edgeport/4D8
231 Edgeport/8i
232 Edgeport/2 DIN
233 Edgeport/4 DIN
234 Edgeport/16 Dual
235
236 To compile this driver as a module, choose M here: the
237 module will be called io_edgeport.
238
239config USB_SERIAL_EDGEPORT_TI
240 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241 help
242 Say Y here if you want to use any of the devices from Inside Out
243 Networks (Digi) that are not supported by the io_edgeport driver.
244 This includes the Edgeport/1 device.
245
246 To compile this driver as a module, choose M here: the
247 module will be called io_ti.
248
249config USB_SERIAL_F81232
250 tristate "USB Fintek F81232 Single Port Serial Driver"
251 help
252 Say Y here if you want to use the Fintek F81232 single
253 port usb to serial adapter.
254
255 To compile this driver as a module, choose M here: the
256 module will be called f81232.
257
258config USB_SERIAL_F8153X
259 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
260 help
261 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
262 USB to serial adapter.
263
264 To compile this driver as a module, choose M here: the
265 module will be called f81534.
266
267
268config USB_SERIAL_GARMIN
269 tristate "USB Garmin GPS driver"
270 help
271 Say Y here if you want to connect to your Garmin GPS.
272 Should work with most Garmin GPS devices which have a native USB port.
273
274 See <http://sourceforge.net/projects/garmin-gps> for the latest
275 version of the driver.
276
277 To compile this driver as a module, choose M here: the
278 module will be called garmin_gps.
279
280config USB_SERIAL_IPW
281 tristate "USB IPWireless (3G UMTS TDD) Driver"
282 select USB_SERIAL_WWAN
283 help
284 Say Y here if you want to use a IPWireless USB modem such as
285 the ones supplied by Axity3G/Sentech South Africa.
286
287 To compile this driver as a module, choose M here: the
288 module will be called ipw.
289
290config USB_SERIAL_IUU
291 tristate "USB Infinity USB Unlimited Phoenix Driver"
292 help
293 Say Y here if you want to use a IUU in phoenix mode and get
294 an extra ttyUSBx device. More information available on
295 http://eczema.ecze.com/iuu_phoenix.html
296
297 To compile this driver as a module, choose M here: the
298 module will be called iuu_phoenix.o
299
300config USB_SERIAL_KEYSPAN_PDA
301 tristate "USB Keyspan PDA Single Port Serial Driver"
302 select USB_EZUSB_FX2
303 help
304 Say Y here if you want to use a Keyspan PDA single port USB to
305 serial converter device. This driver makes use of firmware
306 developed from scratch by Brian Warner.
307
308 To compile this driver as a module, choose M here: the
309 module will be called keyspan_pda.
310
311config USB_SERIAL_KEYSPAN
312 tristate "USB Keyspan USA-xxx Serial Driver"
313 select USB_EZUSB_FX2
314 help
315 Say Y here if you want to use Keyspan USB to serial converter
316 devices. This driver makes use of Keyspan's official firmware
317 and was developed with their support. You must also include
318 firmware to support your particular device(s).
319
320 See <http://blemings.org/hugh/keyspan.html> for more information.
321
322 To compile this driver as a module, choose M here: the
323 module will be called keyspan.
324
325config USB_SERIAL_KLSI
326 tristate "USB KL5KUSB105 (Palmconnect) Driver"
327 help
328 Say Y here if you want to use a KL5KUSB105 - based single port
329 serial adapter. The most widely known -- and currently the only
330 tested -- device in this category is the PalmConnect USB Serial
331 adapter sold by Palm Inc. for use with their Palm III and Palm V
332 series PDAs.
333
334 Please read <file:Documentation/usb/usb-serial.rst> for more
335 information.
336
337 To compile this driver as a module, choose M here: the
338 module will be called kl5kusb105.
339
340config USB_SERIAL_KOBIL_SCT
341 tristate "USB KOBIL chipcard reader"
342 help
343 Say Y here if you want to use one of the following KOBIL USB chipcard
344 readers:
345
346 - USB TWIN
347 - KAAN Standard Plus
348 - KAAN SIM
349 - SecOVID Reader Plus
350 - B1 Professional
351 - KAAN Professional
352
353 Note that you need a current CT-API.
354 To compile this driver as a module, choose M here: the
355 module will be called kobil_sct.
356
357config USB_SERIAL_MCT_U232
358 tristate "USB MCT Single Port Serial Driver"
359 help
360 Say Y here if you want to use a USB Serial single port adapter from
361 Magic Control Technology Corp. (U232 is one of the model numbers).
362
363 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
364 BAY, Belkin F5U109, and Belkin F5U409 devices.
365
366 To compile this driver as a module, choose M here: the
367 module will be called mct_u232.
368
369config USB_SERIAL_METRO
370 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
371 help
372 Say Y here if you want to use a USB POS Metrologic barcode scanner.
373
374 To compile this driver as a module, choose M here: the
375 module will be called metro-usb.
376
377config USB_SERIAL_MOS7720
378 tristate "USB Moschip 7720 Serial Driver"
379 help
380 Say Y here if you want to use USB Serial single and double
381 port adapters from Moschip Semiconductor Tech.
382
383 To compile this driver as a module, choose M here: the
384 module will be called mos7720.
385
386config USB_SERIAL_MOS7715_PARPORT
387 bool "Support for parallel port on the Moschip 7715"
388 depends on USB_SERIAL_MOS7720
389 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
390 select PARPORT_NOT_PC
391 help
392 Say Y if you have a Moschip 7715 device and would like to use
393 the parallel port it provides. The port will register with
394 the parport subsystem as a low-level driver.
395
396config USB_SERIAL_MOS7840
397 tristate "USB Moschip 7840/7820 USB Serial Driver"
398 help
399 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
400 Dual-Serial port device from MosChip Semiconductor.
401
402 The MCS7840 and MCS7820 have been developed to connect a wide range
403 of standard serial devices to a USB host. The MCS7840 has a USB
404 device controller connected to four (4) individual UARTs while the
405 MCS7820 controller connects to two (2) individual UARTs.
406
407 To compile this driver as a module, choose M here: the
408 module will be called mos7840. If unsure, choose N.
409
410config USB_SERIAL_MXUPORT
411 tristate "USB Moxa UPORT Serial Driver"
412 help
413 Say Y here if you want to use a MOXA UPort Serial hub.
414
415 This driver supports:
416
417 [2 Port]
418 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
419 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
420 Isolation
421
422 [4 Port]
423 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
424 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
425 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
426 Isolation
427
428 [8 Port]
429 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
430 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
431
432 [16 Port]
433 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
434 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
435
436 To compile this driver as a module, choose M here: the
437 module will be called mxuport.
438
439config USB_SERIAL_NAVMAN
440 tristate "USB Navman GPS device"
441 help
442 To compile this driver as a module, choose M here: the
443 module will be called navman.
444
445config USB_SERIAL_PL2303
446 tristate "USB Prolific 2303 Single Port Serial Driver"
447 help
448 Say Y here if you want to use the PL2303 USB Serial single port
449 adapter from Prolific.
450
451 To compile this driver as a module, choose M here: the
452 module will be called pl2303.
453
454config USB_SERIAL_OTI6858
455 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
456 help
457 Say Y here if you want to use the OTi-6858 single port USB to serial
458 converter device.
459
460 To compile this driver as a module, choose M here: the
461 module will be called oti6858.
462
463config USB_SERIAL_QCAUX
464 tristate "USB Qualcomm Auxiliary Serial Port Driver"
465 help
466 Say Y here if you want to use the auxiliary serial ports provided
467 by many modems based on Qualcomm chipsets. These ports often use
468 a proprietary protocol called DM and cannot be used for AT- or
469 PPP-based communication.
470
471 To compile this driver as a module, choose M here: the
472 module will be called qcaux. If unsure, choose N.
473
474config USB_SERIAL_QUALCOMM
475 tristate "USB Qualcomm Serial modem"
476 select USB_SERIAL_WWAN
477 help
478 Say Y here if you have a Qualcomm USB modem device. These are
479 usually wireless cellular modems.
480
481 To compile this driver as a module, choose M here: the
482 module will be called qcserial.
483
484config USB_SERIAL_SPCP8X5
485 tristate "USB SPCP8x5 USB To Serial Driver"
486 help
487 Say Y here if you want to use the spcp8x5 converter chip. This is
488 commonly found in some Z-Wave USB devices.
489
490 To compile this driver as a module, choose M here: the
491 module will be called spcp8x5.
492
493config USB_SERIAL_SAFE
494 tristate "USB Safe Serial (Encapsulated) Driver"
495
496config USB_SERIAL_SAFE_PADDED
497 bool "USB Secure Encapsulated Driver - Padded"
498 depends on USB_SERIAL_SAFE
499
500config USB_SERIAL_SIERRAWIRELESS
501 tristate "USB Sierra Wireless Driver"
502 help
503 Say M here if you want to use Sierra Wireless devices.
504
505 Many devices have a feature known as TRU-Install. For those devices
506 to work properly, the USB Storage Sierra feature must be enabled.
507
508 To compile this driver as a module, choose M here: the
509 module will be called sierra.
510
511config USB_SERIAL_SYMBOL
512 tristate "USB Symbol Barcode driver (serial mode)"
513 help
514 Say Y here if you want to use a Symbol USB Barcode device
515 in serial emulation mode.
516
517 To compile this driver as a module, choose M here: the
518 module will be called symbolserial.
519
520config USB_SERIAL_TI
521 tristate "USB TI 3410/5052 Serial Driver"
522 help
523 Say Y here if you want to use the TI USB 3410 or 5052
524 serial devices.
525
526 To compile this driver as a module, choose M here: the
527 module will be called ti_usb_3410_5052.
528
529config USB_SERIAL_CYBERJACK
530 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
531 help
532 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
533 reader. This is an interface to ISO 7816 compatible contact-based
534 chipcards, e.g. GSM SIMs.
535
536 To compile this driver as a module, choose M here: the
537 module will be called cyberjack.
538
539 If unsure, say N.
540
541config USB_SERIAL_XIRCOM
542 tristate "USB Xircom / Entrega Single Port Serial Driver"
543 select USB_EZUSB_FX2
544 help
545 Say Y here if you want to use a Xircom or Entrega single port USB to
546 serial converter device. This driver makes use of firmware
547 developed from scratch by Brian Warner.
548
549 To compile this driver as a module, choose M here: the
550 module will be called keyspan_pda.
551
552config USB_SERIAL_WWAN
553 tristate
554
555config USB_SERIAL_OPTION
556 tristate "USB driver for GSM and CDMA modems"
557 select USB_SERIAL_WWAN
558 help
559 Say Y here if you have a GSM or CDMA modem that's connected to USB.
560
561 This driver also supports several PCMCIA cards which have a
562 built-in OHCI-USB adapter and an internally-connected GSM modem.
563 The USB bus on these cards is not accessible externally.
564
565 Supported devices include (some of?) those made by:
566 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
567
568 To compile this driver as a module, choose M here: the
569 module will be called option.
570
571 If this driver doesn't recognize your device,
572 it might be accessible via the FTDI_SIO driver.
573
574config USB_SERIAL_OMNINET
575 tristate "USB ZyXEL omni.net LCD Plus Driver"
576 help
577 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
578
579 To compile this driver as a module, choose M here: the
580 module will be called omninet.
581
582config USB_SERIAL_OPTICON
583 tristate "USB Opticon Barcode driver (serial mode)"
584 help
585 Say Y here if you want to use a Opticon USB Barcode device
586 in serial emulation mode.
587
588 To compile this driver as a module, choose M here: the
589 module will be called opticon.
590
591config USB_SERIAL_XSENS_MT
592 tristate "Xsens motion tracker serial interface driver"
593 help
594 Say Y here if you want to use Xsens motion trackers.
595
596 This driver supports the new generation of motion trackers
597 by Xsens. Older devices can be accessed using the FTDI_SIO
598 driver.
599
600 To compile this driver as a module, choose M here: the
601 module will be called xsens_mt.
602
603config USB_SERIAL_WISHBONE
604 tristate "USB-Wishbone adapter interface driver"
605 help
606 Say Y here if you want to use a USB attached Wishbone bus.
607
608 Wishbone is an open hardware SoC bus commonly used in FPGA
609 designs. Bus access can be serialized using the Etherbone
610 protocol <http://www.ohwr.org/projects/etherbone-core>.
611
612 This driver is intended to be used with devices which attach
613 their internal Wishbone bus to a USB serial interface using
614 the Etherbone protocol. A userspace library is required to
615 speak the protocol made available by this driver as ttyUSBx.
616
617 To compile this driver as a module, choose M here: the
618 module will be called wishbone-serial.
619
620config USB_SERIAL_SSU100
621 tristate "USB Quatech SSU-100 Single Port Serial Driver"
622 help
623 Say Y here if you want to use the Quatech SSU-100 single
624 port usb to serial adapter.
625
626 To compile this driver as a module, choose M here: the
627 module will be called ssu100.
628
629config USB_SERIAL_QT2
630 tristate "USB Quatech Serial Driver for USB 2 devices"
631 help
632 Say Y here if you want to use the Quatech USB 2
633 serial adapters.
634
635 To compile this driver as a module, choose M here: the
636 module will be called quatech-serial.
637
638config USB_SERIAL_UPD78F0730
639 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
640 help
641 Say Y here if you want to use the Renesas uPD78F0730
642 serial driver.
643
644 To compile this driver as a module, choose M here: the
645 module will be called upd78f0730.
646
647config USB_SERIAL_DEBUG
648 tristate "USB Debugging Device"
649 help
650 Say Y here if you have a USB debugging device used to receive
651 debugging data from another machine. The most common of these
652 devices is the NetChip TurboCONNECT device.
653
654 To compile this driver as a module, choose M here: the
655 module will be called usb-debug.
656
657endif # USB_SERIAL
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 help
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 help
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Nokia mobile phones
70 - Novatel Wireless GPS receivers
71 - Siemens USB/MPI adapter.
72 - ViVOtech ViVOpay USB device.
73 - Infineon Modem Flashloader USB interface
74 - ZIO Motherboard USB serial interface
75
76 To compile this driver as a module, choose M here: the module
77 will be called usb-serial-simple.
78
79config USB_SERIAL_AIRCABLE
80 tristate "USB AIRcable Bluetooth Dongle Driver"
81 help
82 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
83
84 To compile this driver as a module, choose M here: the module
85 will be called aircable.
86
87config USB_SERIAL_ARK3116
88 tristate "USB ARK Micro 3116 USB Serial Driver"
89 help
90 Say Y here if you want to use a ARK Micro 3116 USB to Serial
91 device.
92
93 To compile this driver as a module, choose M here: the
94 module will be called ark3116
95
96config USB_SERIAL_BELKIN
97 tristate "USB Belkin and Peracom Single Port Serial Driver"
98 help
99 Say Y here if you want to use a Belkin USB Serial single port
100 adaptor (F5U103 is one of the model numbers) or the Peracom single
101 port USB to serial adapter.
102
103 To compile this driver as a module, choose M here: the
104 module will be called belkin_sa.
105
106config USB_SERIAL_CH341
107 tristate "USB Winchiphead CH341 Single Port Serial Driver"
108 help
109 Say Y here if you want to use a Winchiphead CH341 single port
110 USB to serial adapter.
111
112 To compile this driver as a module, choose M here: the
113 module will be called ch341.
114
115config USB_SERIAL_WHITEHEAT
116 tristate "USB ConnectTech WhiteHEAT Serial Driver"
117 select USB_EZUSB_FX2
118 help
119 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
120 USB to serial converter device.
121
122 To compile this driver as a module, choose M here: the
123 module will be called whiteheat.
124
125config USB_SERIAL_DIGI_ACCELEPORT
126 tristate "USB Digi International AccelePort USB Serial Driver"
127 help
128 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
129 2 port (plus parallel port) and 4 port USB serial converters. The
130 parallel port on the USB 2 appears as a third serial port on Linux.
131 The Digi Acceleport USB 8 is not yet supported by this driver.
132
133 To compile this driver as a module, choose M here: the
134 module will be called digi_acceleport.
135
136config USB_SERIAL_CP210X
137 tristate "USB CP210x family of UART Bridge Controllers"
138 help
139 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
140 to RS232 converters.
141
142 To compile this driver as a module, choose M here: the
143 module will be called cp210x.
144
145config USB_SERIAL_CYPRESS_M8
146 tristate "USB Cypress M8 USB Serial Driver"
147 help
148 Say Y here if you want to use a device that contains the Cypress
149 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
150
151 Attempted SMP support... send bug reports!
152
153 Supported microcontrollers in the CY4601 family are:
154 CY7C63741 CY7C63742 CY7C63743 CY7C64013
155
156 To compile this driver as a module, choose M here: the
157 module will be called cypress_m8.
158
159config USB_SERIAL_EMPEG
160 tristate "USB Empeg empeg-car Mark I/II Driver"
161 help
162 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
163 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
164 device node. See <file:Documentation/usb/usb-serial.rst> for more
165 tidbits of information.
166
167 To compile this driver as a module, choose M here: the
168 module will be called empeg.
169
170config USB_SERIAL_FTDI_SIO
171 tristate "USB FTDI Single Port Serial Driver"
172 help
173 Say Y here if you want to use a FTDI SIO single port USB to serial
174 converter device. The implementation I have is called the USC-1000.
175 This driver has also been tested with the 245 and 232 devices.
176
177 See <http://ftdi-usb-sio.sourceforge.net/> for more
178 information on this driver and the device.
179
180 To compile this driver as a module, choose M here: the
181 module will be called ftdi_sio.
182
183config USB_SERIAL_VISOR
184 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
185 help
186 Say Y here if you want to connect to your HandSpring Visor, Palm
187 m500 or m505 through its USB docking station. See
188 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
189 driver.
190
191 To compile this driver as a module, choose M here: the
192 module will be called visor.
193
194config USB_SERIAL_IPAQ
195 tristate "USB PocketPC PDA Driver"
196 help
197 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
198 or any other PDA running Windows CE 3.0 or PocketPC 2002
199 using a USB cradle/cable. For information on using the driver,
200 read <file:Documentation/usb/usb-serial.rst>.
201
202 To compile this driver as a module, choose M here: the
203 module will be called ipaq.
204
205config USB_SERIAL_IR
206 tristate "USB IR Dongle Serial Driver"
207 help
208 Say Y here if you want to enable simple serial support for USB IrDA
209 devices. This is useful if you do not want to use the full IrDA
210 stack.
211
212 To compile this driver as a module, choose M here: the
213 module will be called ir-usb.
214
215config USB_SERIAL_EDGEPORT
216 tristate "USB Inside Out Edgeport Serial Driver"
217 help
218 Say Y here if you want to use any of the following devices from
219 Inside Out Networks (Digi):
220 Edgeport/4
221 Rapidport/4
222 Edgeport/4t
223 Edgeport/2
224 Edgeport/4i
225 Edgeport/2i
226 Edgeport/421
227 Edgeport/21
228 Edgeport/8
229 Edgeport/8 Dual
230 Edgeport/2D8
231 Edgeport/4D8
232 Edgeport/8i
233 Edgeport/2 DIN
234 Edgeport/4 DIN
235 Edgeport/16 Dual
236
237 To compile this driver as a module, choose M here: the
238 module will be called io_edgeport.
239
240config USB_SERIAL_EDGEPORT_TI
241 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
242 help
243 Say Y here if you want to use any of the devices from Inside Out
244 Networks (Digi) that are not supported by the io_edgeport driver.
245 This includes the Edgeport/1 device.
246
247 To compile this driver as a module, choose M here: the
248 module will be called io_ti.
249
250config USB_SERIAL_F81232
251 tristate "USB Fintek F81232 Single Port Serial Driver"
252 help
253 Say Y here if you want to use the Fintek F81232 single
254 port usb to serial adapter.
255
256 To compile this driver as a module, choose M here: the
257 module will be called f81232.
258
259config USB_SERIAL_F8153X
260 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
261 help
262 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
263 USB to serial adapter.
264
265 To compile this driver as a module, choose M here: the
266 module will be called f81534.
267
268
269config USB_SERIAL_GARMIN
270 tristate "USB Garmin GPS driver"
271 help
272 Say Y here if you want to connect to your Garmin GPS.
273 Should work with most Garmin GPS devices which have a native USB port.
274
275 See <http://sourceforge.net/projects/garmin-gps> for the latest
276 version of the driver.
277
278 To compile this driver as a module, choose M here: the
279 module will be called garmin_gps.
280
281config USB_SERIAL_IPW
282 tristate "USB IPWireless (3G UMTS TDD) Driver"
283 select USB_SERIAL_WWAN
284 help
285 Say Y here if you want to use a IPWireless USB modem such as
286 the ones supplied by Axity3G/Sentech South Africa.
287
288 To compile this driver as a module, choose M here: the
289 module will be called ipw.
290
291config USB_SERIAL_IUU
292 tristate "USB Infinity USB Unlimited Phoenix Driver"
293 help
294 Say Y here if you want to use a IUU in phoenix mode and get
295 an extra ttyUSBx device. More information available on
296 http://eczema.ecze.com/iuu_phoenix.html
297
298 To compile this driver as a module, choose M here: the
299 module will be called iuu_phoenix.o
300
301config USB_SERIAL_KEYSPAN_PDA
302 tristate "USB Keyspan PDA / Xircom Single Port Serial Driver"
303 select USB_EZUSB_FX2
304 help
305 Say Y here if you want to use a Keyspan PDA, Xircom or Entrega single
306 port USB to serial converter device. This driver makes use of
307 firmware developed from scratch by Brian Warner.
308
309 To compile this driver as a module, choose M here: the
310 module will be called keyspan_pda.
311
312config USB_SERIAL_KEYSPAN
313 tristate "USB Keyspan USA-xxx Serial Driver"
314 select USB_EZUSB_FX2
315 help
316 Say Y here if you want to use Keyspan USB to serial converter
317 devices. This driver makes use of Keyspan's official firmware
318 and was developed with their support. You must also include
319 firmware to support your particular device(s).
320
321 See <http://blemings.org/hugh/keyspan.html> for more information.
322
323 To compile this driver as a module, choose M here: the
324 module will be called keyspan.
325
326config USB_SERIAL_KLSI
327 tristate "USB KL5KUSB105 (Palmconnect) Driver"
328 help
329 Say Y here if you want to use a KL5KUSB105 - based single port
330 serial adapter. The most widely known -- and currently the only
331 tested -- device in this category is the PalmConnect USB Serial
332 adapter sold by Palm Inc. for use with their Palm III and Palm V
333 series PDAs.
334
335 Please read <file:Documentation/usb/usb-serial.rst> for more
336 information.
337
338 To compile this driver as a module, choose M here: the
339 module will be called kl5kusb105.
340
341config USB_SERIAL_KOBIL_SCT
342 tristate "USB KOBIL chipcard reader"
343 help
344 Say Y here if you want to use one of the following KOBIL USB chipcard
345 readers:
346
347 - USB TWIN
348 - KAAN Standard Plus
349 - KAAN SIM
350 - SecOVID Reader Plus
351 - B1 Professional
352 - KAAN Professional
353
354 Note that you need a current CT-API.
355 To compile this driver as a module, choose M here: the
356 module will be called kobil_sct.
357
358config USB_SERIAL_MCT_U232
359 tristate "USB MCT Single Port Serial Driver"
360 help
361 Say Y here if you want to use a USB Serial single port adapter from
362 Magic Control Technology Corp. (U232 is one of the model numbers).
363
364 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
365 BAY, Belkin F5U109, and Belkin F5U409 devices.
366
367 To compile this driver as a module, choose M here: the
368 module will be called mct_u232.
369
370config USB_SERIAL_METRO
371 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
372 help
373 Say Y here if you want to use a USB POS Metrologic barcode scanner.
374
375 To compile this driver as a module, choose M here: the
376 module will be called metro-usb.
377
378config USB_SERIAL_MOS7720
379 tristate "USB Moschip 7720 Serial Driver"
380 help
381 Say Y here if you want to use USB Serial single and double
382 port adapters from Moschip Semiconductor Tech.
383
384 To compile this driver as a module, choose M here: the
385 module will be called mos7720.
386
387config USB_SERIAL_MOS7715_PARPORT
388 bool "Support for parallel port on the Moschip 7715"
389 depends on USB_SERIAL_MOS7720
390 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
391 select PARPORT_NOT_PC
392 help
393 Say Y if you have a Moschip 7715 device and would like to use
394 the parallel port it provides. The port will register with
395 the parport subsystem as a low-level driver.
396
397config USB_SERIAL_MOS7840
398 tristate "USB Moschip 7840/7820 USB Serial Driver"
399 help
400 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
401 Dual-Serial port device from MosChip Semiconductor.
402
403 The MCS7840 and MCS7820 have been developed to connect a wide range
404 of standard serial devices to a USB host. The MCS7840 has a USB
405 device controller connected to four (4) individual UARTs while the
406 MCS7820 controller connects to two (2) individual UARTs.
407
408 To compile this driver as a module, choose M here: the
409 module will be called mos7840. If unsure, choose N.
410
411config USB_SERIAL_MXUPORT
412 tristate "USB Moxa UPORT Serial Driver"
413 help
414 Say Y here if you want to use a MOXA UPort Serial hub.
415
416 This driver supports:
417
418 [2 Port]
419 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
420 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
421 Isolation
422
423 [4 Port]
424 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
425 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
426 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
427 Isolation
428
429 [8 Port]
430 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
431 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
432
433 [16 Port]
434 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
435 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
436
437 To compile this driver as a module, choose M here: the
438 module will be called mxuport.
439
440config USB_SERIAL_NAVMAN
441 tristate "USB Navman GPS device"
442 help
443 To compile this driver as a module, choose M here: the
444 module will be called navman.
445
446config USB_SERIAL_PL2303
447 tristate "USB Prolific 2303 Single Port Serial Driver"
448 help
449 Say Y here if you want to use the PL2303 USB Serial single port
450 adapter from Prolific.
451
452 To compile this driver as a module, choose M here: the
453 module will be called pl2303.
454
455config USB_SERIAL_OTI6858
456 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
457 help
458 Say Y here if you want to use the OTi-6858 single port USB to serial
459 converter device.
460
461 To compile this driver as a module, choose M here: the
462 module will be called oti6858.
463
464config USB_SERIAL_QCAUX
465 tristate "USB Qualcomm Auxiliary Serial Port Driver"
466 help
467 Say Y here if you want to use the auxiliary serial ports provided
468 by many modems based on Qualcomm chipsets. These ports often use
469 a proprietary protocol called DM and cannot be used for AT- or
470 PPP-based communication.
471
472 To compile this driver as a module, choose M here: the
473 module will be called qcaux. If unsure, choose N.
474
475config USB_SERIAL_QUALCOMM
476 tristate "USB Qualcomm Serial modem"
477 select USB_SERIAL_WWAN
478 help
479 Say Y here if you have a Qualcomm USB modem device. These are
480 usually wireless cellular modems.
481
482 To compile this driver as a module, choose M here: the
483 module will be called qcserial.
484
485config USB_SERIAL_SPCP8X5
486 tristate "USB SPCP8x5 USB To Serial Driver"
487 help
488 Say Y here if you want to use the spcp8x5 converter chip. This is
489 commonly found in some Z-Wave USB devices.
490
491 To compile this driver as a module, choose M here: the
492 module will be called spcp8x5.
493
494config USB_SERIAL_SAFE
495 tristate "USB Safe Serial (Encapsulated) Driver"
496
497config USB_SERIAL_SAFE_PADDED
498 bool "USB Secure Encapsulated Driver - Padded"
499 depends on USB_SERIAL_SAFE
500
501config USB_SERIAL_SIERRAWIRELESS
502 tristate "USB Sierra Wireless Driver"
503 help
504 Say M here if you want to use Sierra Wireless devices.
505
506 Many devices have a feature known as TRU-Install. For those devices
507 to work properly, the USB Storage Sierra feature must be enabled.
508
509 To compile this driver as a module, choose M here: the
510 module will be called sierra.
511
512config USB_SERIAL_SYMBOL
513 tristate "USB Symbol Barcode driver (serial mode)"
514 help
515 Say Y here if you want to use a Symbol USB Barcode device
516 in serial emulation mode.
517
518 To compile this driver as a module, choose M here: the
519 module will be called symbolserial.
520
521config USB_SERIAL_TI
522 tristate "USB TI 3410/5052 Serial Driver"
523 help
524 Say Y here if you want to use the TI USB 3410 or 5052
525 serial devices.
526
527 To compile this driver as a module, choose M here: the
528 module will be called ti_usb_3410_5052.
529
530config USB_SERIAL_CYBERJACK
531 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
532 help
533 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
534 reader. This is an interface to ISO 7816 compatible contact-based
535 chipcards, e.g. GSM SIMs.
536
537 To compile this driver as a module, choose M here: the
538 module will be called cyberjack.
539
540 If unsure, say N.
541
542config USB_SERIAL_WWAN
543 tristate
544
545config USB_SERIAL_OPTION
546 tristate "USB driver for GSM and CDMA modems"
547 select USB_SERIAL_WWAN
548 help
549 Say Y here if you have a GSM or CDMA modem that's connected to USB.
550
551 This driver also supports several PCMCIA cards which have a
552 built-in OHCI-USB adapter and an internally-connected GSM modem.
553 The USB bus on these cards is not accessible externally.
554
555 Supported devices include (some of?) those made by:
556 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
557
558 To compile this driver as a module, choose M here: the
559 module will be called option.
560
561 If this driver doesn't recognize your device,
562 it might be accessible via the FTDI_SIO driver.
563
564config USB_SERIAL_OMNINET
565 tristate "USB ZyXEL omni.net LCD Plus Driver"
566 help
567 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
568
569 To compile this driver as a module, choose M here: the
570 module will be called omninet.
571
572config USB_SERIAL_OPTICON
573 tristate "USB Opticon Barcode driver (serial mode)"
574 help
575 Say Y here if you want to use a Opticon USB Barcode device
576 in serial emulation mode.
577
578 To compile this driver as a module, choose M here: the
579 module will be called opticon.
580
581config USB_SERIAL_XSENS_MT
582 tristate "Xsens motion tracker serial interface driver"
583 help
584 Say Y here if you want to use Xsens motion trackers.
585
586 This driver supports the new generation of motion trackers
587 by Xsens. Older devices can be accessed using the FTDI_SIO
588 driver.
589
590 To compile this driver as a module, choose M here: the
591 module will be called xsens_mt.
592
593config USB_SERIAL_WISHBONE
594 tristate "USB-Wishbone adapter interface driver"
595 help
596 Say Y here if you want to use a USB attached Wishbone bus.
597
598 Wishbone is an open hardware SoC bus commonly used in FPGA
599 designs. Bus access can be serialized using the Etherbone
600 protocol <http://www.ohwr.org/projects/etherbone-core>.
601
602 This driver is intended to be used with devices which attach
603 their internal Wishbone bus to a USB serial interface using
604 the Etherbone protocol. A userspace library is required to
605 speak the protocol made available by this driver as ttyUSBx.
606
607 To compile this driver as a module, choose M here: the
608 module will be called wishbone-serial.
609
610config USB_SERIAL_SSU100
611 tristate "USB Quatech SSU-100 Single Port Serial Driver"
612 help
613 Say Y here if you want to use the Quatech SSU-100 single
614 port usb to serial adapter.
615
616 To compile this driver as a module, choose M here: the
617 module will be called ssu100.
618
619config USB_SERIAL_QT2
620 tristate "USB Quatech Serial Driver for USB 2 devices"
621 help
622 Say Y here if you want to use the Quatech USB 2
623 serial adapters.
624
625 To compile this driver as a module, choose M here: the
626 module will be called quatech-serial.
627
628config USB_SERIAL_UPD78F0730
629 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
630 help
631 Say Y here if you want to use the Renesas uPD78F0730
632 serial driver.
633
634 To compile this driver as a module, choose M here: the
635 module will be called upd78f0730.
636
637config USB_SERIAL_XR
638 tristate "USB MaxLinear/Exar USB to Serial driver"
639 help
640 Say Y here if you want to use MaxLinear/Exar USB to Serial converter
641 devices.
642
643 To compile this driver as a module, choose M here: the
644 module will be called xr_serial.
645
646config USB_SERIAL_DEBUG
647 tristate "USB Debugging Device"
648 help
649 Say Y here if you have a USB debugging device used to receive
650 debugging data from another machine. The most common of these
651 devices is the NetChip TurboCONNECT device.
652
653 To compile this driver as a module, choose M here: the
654 module will be called usb-debug.
655
656endif # USB_SERIAL